2 0 1 3 E D I T I O N
FOR WATER & WASTEWATER, FIRE PROTECTION & INDUSTRIAL APPLICATIONSNSF®
Certified toANSI/NSF 61
TR TELE FLEX® CouplingPROVIDES DEFLECTION AND EXTENSION WITH JOINT RESTRAINT
tr tElE FlEx® couplingNSF®
Certified toANSI/NSF 61
P 2866.
DIP.
PIPE
2 0 1 3 E d i t i o n
REVISED 04.13u.s. PiPE and FoundrY co. tr tElE FlEx® coupling Bro-067
table of contentsTR TELE FLEX Coupling 3
Coupling Dimensions 4
Products for Water, Wastewater and Fire Protection 5
tr tElE FlEx® couplingNSF®
Certified toANSI/NSF 61
P 3866.
DIP.
PIPE
2 0 1 3 E d i t i o n
REVISED 04.13u.s. PiPE and FoundrY co. tr tElE FlEx coupling Bro-067
The TR TELE FLEX® Coupling consists of two XTRA FLEX® Couplings and a TR FLEX® Telescoping Sleeve. These units are connected with two short lengths of pipe. The XTRA FLEX Couplings serve to give the unit its deflection and offset capabilities while the TR FLEX Telescoping Sleeve allows the unit to elongate and contract. The two lengths of pipe used in the standard unit are the shortest practical length. To acquire a greater offset capability, longer lengths of these connecting pipe can be provided.
The TR TELE FLEX Coupling consists of Ductile Iron components. With its deflection and extension capabilities, this assembly is well suited for use in areas where ground movement may result from unstable soil conditions or in earthquake-prone zones. Other typical uses of the TR TELE FLEX Coupling may include:
Connecting of pipelines to pump stations
Connecting of pipelines to water storage tanks
The TR TELE FLEX Coupling is shipped preassembled and palletized and protected with polyethylene encasement. The polyethylene encasement should be left on the assembly to provide protection of the moving parts.
TR TELE FLEX® and XTRA FLEX® are Registered Trademarks of U.S. Pipe and Foundry Company.
tr tElE FlEx coupling
tr tElE FlEx® couplingNSF®
Certified toANSI/NSF 61
P 4866.
DIP.
PIPE
2 0 1 3 E d i t i o n
REVISED 04.13u.s. PiPE and FoundrY co. tr tElE FlEx coupling Bro-067
SIzEInches
Lay LEngthInches
OvEraLL LEngth Inches tOtaL
WEIght Pounds
PIPE LEngth (cLaSS 53) (2 PIEcES)
Inches
Max DEf. at xtra fLEx®
coupling Degrees
Max ExtEnSIOn StraIght
Inches
Max tOtaL DEfLEctIOn
Degrees
Max OffSEt Inches
ExtEnSIOn at Max OffSEt Inches cLOSED ExtEnDED cLOSED ExtEnDED
4 49.26 62.68 58.94 72.36 300 21 20° 13.42 40° 21.44 9.64
6 54.26 69.44 64.80 79.98 455 23 20° 15.18 40° 23.75 10.99
8 61.62 78.90 73.26 90.54 1010 26 20° 17.28 40° 26.99 12.52
10 68.18 86.00 80.24 98.06 1460 27 16.5° 17.82 33° 24.43 14.28
12 71.50 90.86 84.50 103.46 2000 29 16.5° 19.36 33° 25.81 15.62
14 80.96 102.46 96.46 117.96 2685 35 12.5° 21.50 25° 22.18 19.07
16 89.12 111.02 105.02 126.92 2920 37 12° 21.90 24° 23.08 19.47
18 93.04 115.42 109.42 131.80 3930 38 10.5° 22.38 21° 21.03 20.45
20 95.10 117.90 111.90 134.70 4295 39 10° 22.80 20° 20.47 21.01
24 102.82 126.54 120.54 144.26 6235 41 8° 23.72 16° 17.61 22.47
coupling dimensions
tr tElE FlEx® couplingNSF®
Certified toANSI/NSF 61
P 5866.
DIP.
PIPE
2 0 1 3 E d i t i o n
u.s. PiPE and FoundrY co. tr tElE FlEx coupling Bro-067 REVISED 04.13
Products for Water, Wastewater and Fire Protection
ductile iron Pipe siZE ranGE
TYTON JOINT® Pipe 3"-64" Ductile Iron
Mechanical Joint Pipe 4"-12" Ductile Iron
TR FLEX® Pipe 4"-64" Ductile Iron
Flanged Pipe 3"-64" Ductile Iron
USIFLEX® Boltless Flexible Joint Pipe — 4"-48" Ductile Iron for Subaqueous Installations
restrained Joints
TR FLEX® Pipe 4"-64" Ductile Iron
MJ FIELD LOK® Gaskets 4"-24"
FIELD LOK 350® Gaskets 4"-24"
FIELD LOK® Gasket 30" & 36"
TR FLEX GRIPPER® Rings 4"-36" Ductile Iron
TR TELE FLEX® Assemblies 4"-24" Ductile Iron
HP LOK™ Restrained Joint 30"-42"
ductile iron Fittings
TYTON® Fittings 14"-64" Ductile Iron
TRIM TYTON® Fittings 4"-12" Ductile Iron
TR FLEX® Fittings and TR FLEX® Telescoping Sleeves 4"-64" Ductile Iron
Mechanical Joint Fittings 3"-48" Ductile Iron
TRIM TYTE® MJ Fittings 3"-48" Ductile Iron
Flanged Fittings 3"-64" Ductile Iron
XTRA FLEX® Couplings 4"-24" Ductile Iron
Miscellaneous Products
PROTECTO 401™ Lined Ductile Iron Pipe for 4"-64" Ductile Iron Domestic Sewage and Industrial Wastes
FLANGE-TYTE® Gaskets 4"-64"
Polymeric Linings For all pipe sizes
Saddle Outlets Various Ductile Iron
Welded Outlets Various Ductile Iron
Polyethylene Encasement 4"-64"
Our products are manufactured in conformance with National Standards so that our customers may be assured of getting the performance and longevity they expect. Use of accessories or other appurtenances that do not comply with recognized standards may jeopardize the performance and longevity of the project.
P.o. Box 10406Birmingham, al 35202
866.diP.PiPE (866.347.7473)Fax 205.254.7165
www.uspipe.com
All U.S. Pipe brochures and/or products are subject to change without further notice.
rEGional salEs oFFicEs
EastErn rEGional oFFicE(609) 387-6120 (Phone)
(609) 387-6050 (Fax)
WEstErn rEGional oFFicE(815) 725-7168 (Phone)
(815) 725-7165 (Fax)
PaciFic coast rEGional oFFicE(510) 441-5800 (Phone)
(510) 441-5885 (Fax)
southErn rEGional oFFicE(205) 254-7229 (Phone)
(205) 254-7009 (Fax)
intErnational salEs oFFicE(205) 254-7230 (Phone)
(205) 254-7274 (Fax)