The company SAND Profile GmbHSAND Profile, founded in 1983, has grown from a trading company into an leading manufacturer of rubber and thermo-
plastic extrusions. Today, we service a wide range of customers with our products and have now become partners
to the automotive industry. Product ideas and innovative solutions generated by our development centre can quickly
be realised with the help of our in-house die-making facility. From concept to approval stage the new profiles can be
manufactured in a wide range of thermoplastic or elastomeric materials. Our products are exclusively manufactured
at Stockstadt and we are proud of our continued growth over the past 20 years.
Thanks to our competence and creativity we are able to offer our customers solutions that can be quickly implemented
and are designed to last.
Aerial photograph
of our manufacturing site in Germany
Production site in Germany:SAND Profile GmbHDr.-Patt-Str. 9-11
D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0
Fax: +49 (0) 60 27 41 60-60
E-Mail: [email protected]
Adresses:
Office USA:SAND-Thermoplast und Elastomer-Profiles Inc.5148 Kennedy Road, Suite 600
Atlanta, GA 30297
Phone: +1 770 909 90 14
Fax: +1 770 909 92 67
E-Mail: [email protected]
Office UK:SAND Profile GmbH50 Suckling Green Lane, Codsall
Wolverhampton, WV8 2BT
Phone: +44 1902 840 405
Fax: +44 1902 840 405
E-Mail: [email protected]
DQS certification according to
# of registration: 066247
Internet: www.sandprofile.com
22
Our complete Delivery & Manufacturing Program
Stand 03/03
Edge protection profiles, Sealing profiles with and without metal carrier
Rubber glazing and filler profiles
Rubber, expanded rubber profiles
Fastening elements for car seating upholstery and retainers
Custom-made products Frames, rings, custom lengths, profiles with flock coating, etc.)
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Del
iver
y&
Man
ufa
ctu
rin
gP
rog
ram
Sealing profiles Glazing profiles Slip-on profiles
Sponge rubber profiles Self-adhesive expanded rubber Door sealing profiles
Edge protection profiles Sealing profiles Sealing profiles
Edging profiles Filler profilesPVC profile withoutwire carrier
Vulcanised corner profile Draw-cordfastening of car seat upholstery
Issue 03/03
Co
nte
nts
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
3
Del
iver
y-&
Man
ufa
ctu
rin
gP
rog
ram
Contents
Chapter Page
Index of articles
Materials
Factory tolerances
Edge protectors
Sponge rubber sealings
Gista Sealings
Glazing profiles
Filler profiles
Glass run channels with flock
Edging profiles
Door sealing profiles
Finger guard profiles
Special profiles
Sponge rubber profiles
4
7
11
14
20
33
45
50
52
54
56
58
61
51
Sealing profiles 23
Issue 03/03
Del
iver
y&
Man
ufa
ctu
rin
gp
rog
ram
4
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
A1 010
A1 012
A1 014
A1 016
A1 018
A1 019/13
A1 022
A1 023/4
A1 024/4
A1 030
A1 034
A1 044
A1 077
Ind
exo
fArt
icle
s
A1 020/10
Index of articles according to reference numbers
Article reference page article reference article referencepage page
A1 009
A1 011
A1 015
A1 021
A1 023/2
A1 024/2
A1 032
A1 101
A1 103
A1 104/4
A1 105/2
A1 105/4A1 105/6A1 107
A1 108
A1 110
A1 119
A1 121/2A1 121/4
A1 123
A1 132
A1 134/2
A1 134/6
A1 500
A1 502A1 503
A1 512A1 513
A1 517A1 520
A1 521
A1 526
A1 528
A1 536
A1 549
A2 027
A2 033
A2 063
A2 081
A2 106/4A2 106/6
A2 124A2 125
A2 126
A2 128
A2 174
A2 193A2 196
A2 248A2 254
A2 255
A2 257
A2 506S
A2 511A2 513
A2 514
A2 516/2
A2 518A2 523
A2 539A2 540
A2 541
A2 545
A2 548
A2 558
A2 805
A2 813
A3007
A3052
A3072A3073
A3074
A3079
A1 024/6 A1 525 A2 533
A1 100 A2 028 A2 554
A1 104/6 A2 106/2 A2 814
A1 075 A1 550 A2 546
A2 516/4
15
1515
15
16
16
1616
17
16
16
15
1516
16
16
17
15
5
16
1818
28
27
31
2424
32
32
3224
28
26
26
2828
29
31
29
42
42
40
33
333343
4236
44
449
38
3832
32
17
18
1829
29
29
2925
30
27
30
3027
29
28
28
19
38
43
3435
35
353343
38
4040
8
34
41
41
40
18
18
19
15
31
3031
43
27
29
A1 109 A2 127 A307827 26 39
A1 114 A2 142 A310427 28 41
A1 104/2 A2 072 A2 80724 16 18
A1 102 A2 051 A2 80424 15 18
15 A2 158 24A1 117 24
17
39
A1 013 A1 121/6 A2 21315 28 25
A1 019/8 A1 162 A2 30717 29 26
A1 020/8 A1 501 A2 50717 42 38
A1 017 A1 134/4 A2 25616 29 3116
A1 037 A1 538 A2 54416 35 33
Issue 03/03
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
5
Del
iver
y-&
Man
ufa
ctu
rin
gP
rog
ram
Index of articles according to reference numbers
Article reference page article reference article referencepage page
A3126 2536
A3129 17
A3145 41
A3148 37
A3152 35
A3172 42A3180 34A3196 33A3210 41
A3223 37
A3224/2 39
A3224/4 39A3224/5
A3224/6 39
39
A3225 35A3228 43
A3229 40
A3240 38
A3276 43A3280 34A3281 17A3288 39
A3289 36A3297 40A3321 36
41A334817A3360
A3339 30
A3169 40
39A3361/4
B1 102
B1 103B1 104
B1 106
B1 107
B1 108
B1 110
B1 112
B1 113B1 114B1 115
B1 118
B1 119
B1 120B1 121
B1 122
B1 123B1 124
B1 134
B1 139B1 142
B1 148
B1 159
B1 181
B2 122 (NBR)B2 130B2 133
B2 164
B2 173
B1 125
B1 132
B1 127
B1 117
B1 155
B2 149B2 144
B2 157
B2 152
B2 158B2 162B2 163
B2 167B2 168
46
4646
46
46
46
46
46
46464647
46
46
4646
46
4646
46
46
46
46
4646
464846
46
464646
4747
46
47
494849
46
494846
B2 177*
C1 200
C1 201
C1 202
C1 250
C1 251
C1 252
C1 253C1 254
D1 010
D1 011
D1 012
D1 013D1 014
D1 015
D1 020D1 021
D1 022
D1 024
D1 025
D1 026
D1 028D1 034
D1 123
D2 178
D2 301
D2 302
D2 335
47
50
50
50
50
50
50
5050
52
52
52
5353
53
5252
52
53
53
53
5253
48
51
51
51
51
Ind
exo
far
ticl
esD1 127 54
D2 274 54
D2 311 55
A3120 37
D1 119 59
D1 128 56
D1 133 56D1 135 57D1 137 59
D1 159 58D2 166 58
D2 167 58
D2 230 58
D2 327 59
39A3361/6
A3127
A3114 40
Issue 03/03
Del
iver
y&
Man
ufa
turi
ng
Pro
gra
m
6
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Index of articles according to reference numbers
Article reference page article reference page
E2 566
E2 568
E2 541
E2 546E2 547
E2 548
E2 553E2 554
E2 555
E2 556
E2 557
E2 559
E2 562E2 563
21
22
21
2121
21
2222
22
21
22
2221
21
E2 726 21
Ind
exo
fArt
icle
s
E2 707 22
E2 581
E2 582
E2 583
E2 584
E2 587
E2 593
E2 595
E2 598E2 605
E2 609
E2 611
E2 618
E2 632
E2 657
E2 659E2 672
E2 683
E2 594
2122
22
22
21
21
21
21
2221
21
21
22
2222
21
21
22
E2 701 21
66E1 500 D
E1 506 D
E1 504 D
E1 503 D
E1 509 D
E1 510 D
E1 512 D
E1 511 D
E1 515 D
E1 516 D
E1 520 D
E1 519 D
E1 517 D
E1 521 D
E1 522 D
E1 524 DE1 523 D
E1 526 DE1 530 D
E2 503 D
67
66
67
67
E1 501 D 66
67
66
66
66
66
67
66
66
66
E1 514 D 66
67
67
66
6767
66
E2 580 22
E2 558 21
E2 647 22
G1 101
G1 104
G1 106
G1 108
54
54
54
54
G2 125 58
E2 705 D 67
M1 001 57
G2 011 56
E2 572
E2 570
E2 573
21
22
21
E2 575
E2 577
E2 576
21
21
21
D2 358 51
D2 445 59
D2 407 57
D2 421 56
D2 422 59
Issue 03/03
Mat
eria
lQu
alit
y
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
7
Tech
nic
alD
ata
PVC and TPE Material Quality
Thermoplastic Elastomers
Elastic like rubber, yet not rubber !
Elastic, supple and flexible - these are the properties typical for rubber, a material known by everybodyand part of everyday life in many forms.
Rubber is made from caoutchouc, a natural or synthetic product. Caoutchouc is a viscous plasticmaterial, which is transformed into elastic rubber only by adding polymerizing substances such assulphur or peroxide and subsequent heating. During this "vulcanization" the thread-like caoutchoucmolecules polymerize due to the build-up of chemical bonds between each other. This polymerizationis the reason for the product's elasticity. The vulcanization can only be reversed by thermaldestruction.
The Thermoplastic Elastomers (TPEs) show a completely different behaviour. As their nameconveys, these materials turn plastic during heating (Greek: thermos = heat), when cooling, however,they revert to elastic behaviour again. In contrast to the chemical polymerization of rubber, in thiscase a physical polymerization occurs.
Considering their structure and behaviour, the TPEs range between thermoplastics and elastomers.They can be processed as easily as thermoplastics and have the most important properties of rubber.Above all, TPEs are no risk for the environment. In contrast to rubber, they can simply be recycled andre-processed.
In the mean time, there exists a plurality of TPE qualities for the most various applications such as thefood compatible quality approved and released by the FDA.
PVC
PVC (polyvinyl-chloride) is the most important among all polymers. Its part in the German chlorineproduction amounts to about one quarter. It has been produced for more than 55 years.
The advantages of PVC are its stability as a material and its extremely good resistance againstweather for example. It does not corrode, is hardly flammable and does not de-polymerize. Yet, theformation of dioxines during combustion is an extreme disadvantage.
Nowadays, PVC is mostly used in construction, medicine (in instruments, not drugs) and packaging.There is a difference made between hard PVC, used in pipes, profiles for windows and borders (ratioof PVC: 77-89%) and soft PVC, which is used in insulation, tubes, floors and edge protection profiles(ratio of PVC: 44-61%).
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Issue 03/03
Mat
eria
lQu
alit
y
8
Del
iver
y&
Man
ufa
ctu
rin
gP
rog
ram
Natural Rubber (NR)
Harvested as latex from the Hevea brasiliensis, polymerized with sulfur.Temperature range: -40 to +70°C.Advantages: Good elasticity and mechanical properties (tear and abrasion resistance, notch toughness,
elasticity), no remaining deformation after strain, high resistance to alternating bending.Disadvantages: Medium to low resistance to oil, weather and ozone as well as thermal resistance;
flammable.
Ethylene-Propylene-Diene Monomer (EPDM)
Synthetic caoutchouc, terpolymers (EPDM polymerized with sulfur).Temperature range: -50 to +120°C dry conditions; with water and steam up to 130°C.Advantages: Excellent weather resistance, as well as to ageing, ozone, chemicals, hot water and steam;
good resistance to polar fluids such as acetone, methanol etc.,outstanding electrical insulation properties, low steam permeability, good thermal resistance,extremely low brittleness temperature.
Disadvantages: Low resistance to aliphatic and aromatic hydrocarbons (mineral oil, petrol, fuels);flammable.
Polychloroprene (CR)
Synthetic caoutchouc mostly polymerized with metal oxides, not sulfur.Temperature range: -30 to +90°C, hot water not recommended.Advantages: Good thermal resistance as well as to ageing, weather, ozone, low flammability, high
resistance to alternating bending, medium resistance against oil (higher thans NR, lowerthan nitrile rubber; good mechanical properties and elasticity, but not as good as for NR;small deformation remaining.
Disadvantages: According to type of CR-Typ, possibility of crystallization due to lasting cold.
Nitrile rubber (NBR)
Synthetic caoutchouc, Polyacryl-Nitrile-Butadiene rubber polymerized with sulfur.Temperature range: -20 to +100°C with dry conditions, hardens with hot air, with oils up to +120°C, with
water up to +80°C.Advantages: High oil, petrol and thermal resistance, good mechanical toughness, low remaining
deformation under pressure.Disadvantages: Very low weather and ozone resistance, low elasticity, flammable
Colours
All sponge rubber round and square cords are available in black and light grey.
Sponge Rubber Varieties
Issue 03/03
Mat
eria
lQu
alit
ies
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
9
Tech
nic
alIn
form
atio
n
Sponge Rubber - Material Properties
A=
Invi
ewof
the
mul
titud
eof
chem
ical
s,so
lven
ts,a
pplic
atio
nte
mpe
ratu
res
and
times
,the
valu
equ
oted
may
vary
inso
me
case
s.F
orex
ampl
e,on
ety
peof
elas
tom
erw
hich
norm
ally
show
slo
wre
sist
ance
prop
ertie
s,m
ight
show
ave
rygo
odre
sist
toce
rtai
nm
edia
.B
=A
trel
ativ
ely
high
,res
p.lo
wte
mpe
ratu
res
resi
stan
cege
nera
llydr
ops.
C=
The
sear
ebo
rder
line
valu
esw
hich
can
vary
depe
ndin
gon
the
com
posi
tion
ofth
em
ixtu
re.
++=
exce
llent
tove
rygo
od+
=go
odo
=sa
tisfa
ctor
yto
mod
erat
e-
=lo
wto
poor
Th
ese
ind
icat
ion
sar
em
erel
yre
fere
nce
valu
esan
do
fp
ure
lyin
fora
mti
vech
arac
ter
Ch
emic
alN
om
encl
atu
reN
atu
ral
Sty
rol-
Bu
tad
ien
e-ru
bb
er(B
un
a)
Nit
rile
-ru
bb
er(P
erb
un
an)
Ch
loro
pre
ne-
rub
ber
(Neo
pre
n)
Eth
ylen
e-P
rop
ylen
e-D
ien
e-F
luo
r-el
asto
mer
(Vit
on
)
Met
hyl
-si
lico
ne
rub
ber
(Silo
pre
n)
Po
ly-v
inyl
-ch
lori
de
(Ves
talit
)V
esto
lit
Abb
revi
atio
nas
per
AS
TM
D14
18N
RS
BR
NB
RC
RE
PD
MF
KM
MQ
/MV
Qso
ftP
VC
Sho
reA
Har
dnes
sD
urom
eter
(±5)
40-
9045
-90
45-
9040
-90
40-
9065
-90
30–
8055
–95
Ten
sile
Str
engt
hN
/mm
²4
-15
4-
154
-14
5-
156
-13
OO
OR
ecoi
lela
stic
ityat
20°
C+
++
O+
+O
OA
bras
ion
resi
stan
ce++
+++
++
OO
OC
hem
ical
Res
ista
nce
(A)
++
O+
++
++
+++
Oil
resi
stan
ce(A
)-
-++
+-
+++
+P
etro
lRes
ista
nce
(A)
none
-+
--
++-
+S
olve
ntR
esis
tanc
e(A
)-
-+
+O
O+
OT
empe
ratu
reS
tabi
lity
°C(C
)-4
0to
+80
-30
to+8
0-3
0to
+100
-25
to+
100
-40
to+1
00-2
0to
+20
0-5
0to
+180
-25
to+
60O
zone
Res
ista
nce
OO
O+
++
++
++
+O
Ger
nera
lWea
ther
Res
ista
nce
O+
++
++
++
++
++
Gas
Impe
rmea
bilit
yO
O+
+O
O+
Res
ista
nce
tope
rman
ent
Def
orm
atio
n+
++
++
+O
OO
Adh
esio
nto
Met
al++
++O
+O
OO
Die
lect
ricP
rope
rtie
s+
++
-O
++
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Issue 03/03
Mat
eria
lQu
alit
y
10
Tech
nic
alIn
form
atio
n
Sponge Rubber - Material Properties
++ = excellent to very good
++ = good
= satisfactory to moderate
– = low to poor
Thermal Behaviour Physical PropertiesBasicElastomer
Trademark Lowestapplicationtemperature
Highest application temperature Remaining Combustionbehaviour
Weatheringand ozoneresistance
Gluingpropertiesdry water oil steam deformation
° C ° C ° C ° C ° C
Natural Crepe
Rubber Sheets
(NR) SMR 5 CV–40 +100 +70 – – ++ ++
Ethylene- Keltan
Propylene- Vistalon
Diene Mono- Nordel
mer (EPDM) Buna AP
–50 +120 +120 – +120 ++ ++
Chloroprene Baypren
(CR) Neoprene–30 +100 – – – + + ++
Acryl- Nitrile-
Butadiene
Rubber
(NBR)
–30 +100 +80 +120 – + +
Styrol-
Butadiene-
Rubber
(SBR)
BUNA EM –30 +70 +70 – – +
Resistance to Fluid MediaOrganic solutions
Basic Trademark Water Detergents Acids Lyesolutions
Oils Petrols aliphatic aromatic Kebone
elastomer hydrocarbons hydrocarbons
Natural Crepe
Rubber Sheets
(NR) SMR 5 CV+ + – – – – +
Ethylene- Keltan
Propylene Vistalon
Diene Mono- Nordel
mer (EPDM) Buna AP
++ + + + – – – – +
Chloroprene Baypren
(CR) Neoprene+ + + + – –
Acryl- Nitrile-
Butadiene-
Rubber
(NBR)
Perbunan N + + + + + + –
Styrol-
Butadiene-
Rubber
(SBR)
BUNA EM + + + + – – – – +
Perbunan N
�
��
��
��
� � �
��
��
Issue 03/03
Tech
nic
alD
ata
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
11
Fac
tory
Tole
ran
ces
Factory Tolerances
The purpose of the subsequently compiled tolerances from the respective standard is to facilitatethe quick assignment of tolerated dimensional deviations.Not applicable to drawings with fixed tolerances.
Moulded soft rubber parts (elastomers) based on DIN 7715 M4
Nominal range in mm + / - mmup to 6,3 0,5
> 6,3 to 10,0 0,7> 10,0 to 16,0 0,8> 16,0 to 25,0 1,0> 25,0 to 40,0 1,3> 40,0 to 63,0 1,6> 63,0 to 100,0 2,0> 100,0 to 160,0 2,5> 160,0 1,5 %
Solid and soft rubber profiles (sections) based on DIN ISO 3302-1E2
Nominal range in mm + / - mmup to 2,5 0,35
> 2,5 to 4,0 0,4> 4,0 to 6,3 0,5> 6,3 to 10,0 0,7> 10,0 to 16,0 0,8> 16,0 to 25,0 1,0> 25,0 to 40,0 1,3> 40,0 to 63,0 1,6> 63,0 to 100,0 2,0
Tolerances for custom lengths (rubber) based on DIN ISO 3302-1 L3
up to 40 1,6> 40 to 63 2,0> 63 to 100 2,5> 100 to 160 3,2> 160 to 250 4,0> 250 to 400 5,0> 400 to 630 6,3> 630 to 1000 10,0> 1000 to 1600 12,5> 1600 to 2500 16,0
+ / - mmNominal range in mm
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Issue 03/03
Tech
nic
alIn
form
atio
n
12
Fac
tory
Tole
ran
ces
Factory Tolerances (cont'd)
The purpose of the subsequently compiled tolerances from the respective standard is to facilitatethe quick assignment of tolerated dimensional deviations.Not applicable to drawings with fixed tolerances.
Sponge rubber profiles (sections) based on DIN ISO 3302-1 E3
Nominal range in mm + / - mm
up to 2,5 0,5> 2,5 to 4,0 0,7> 4,0 to 6,3 0,8> 6,3 to 10,0 1,0> 10,0 to 16,0 1,3> 16,0 to 25,0 1,6> 25,0 to 40,0 2,0> 40,0 to 63,0 2,5> 63,0 to 100,0 3,2
PVC-Profiles (sections) based on DIN 16941 3B
Nominal range in mm + / - mmup to 3,0 0,4
> 3,0 to 6,0 0,6> 6,0 to 10,0 0,7> 10,0 to 16,0 0,8> 18,0 to 30,0 1,0> 30,0 to 50,0 1,2> 50,0 to 80,0 1,5> 80,0 to 120,0 1,9> 120,0 to 180,0 2,3
Tolerances for custom lengths (PVC) based on DIN 16941 4B
Nominal range in mm + / - mmup to 400 5,0
> 400 to 1000 10,0> 1000 to 2500 20,0> 2500 to 6000 30,0> 6000 to 2 %
Issue 03/03
Tech
nic
alD
ata
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
13
Sp
ecia
lPro
du
cts
Special Products
From a technical and personnel point of view, we are able to offer our customers solutions to suit theirapplication. Our team of sales representatives is in close contact with our designers and their consultingfunction is more and more appreciated. Our toolmaking facility manufacture up to three new dies a week.
From all products listed on the following pages, we customize in-house:
vulcanized frames and ringswelded or bonded frames and ringscustom lengths, angle and mitre cutsself-adhesive profiles, for easier positioning or equipped with Acrylic Foam* for lasting adhesion
Furthermore, the following special products can be made to order:
profiles with injected butyl* to improve the sealing ability (for motorhomes and caravans, for example)
profiles coated with non-woven fabric* or flock* to improve the sliding ability and the appearance(ie. for window panes and sliding windows)
profiles with spray coating* to improve the sliding ability (ie. for sliding windows)
all sponge rubber profiles can be manufactured in different types of material. The various materialproperties are listed in a table on page 9.
EMI-Profiles, ie. electro-magnetic interference profiles which are coated with a special EMI film* .These profiles are mainly used in the construction of switch cabinets and bulk electrical equipment.
* You are welcome to ask for the respective data sheets for the materials used.
Edge protection profiles simplify the finishing of edges. They eliminate preparatory andfollow-up work, neutralize respectively cover sheet metal edges. Furthermore, their decorativeeffect is often desired.
The edge protectors consist of a U-shaped metal base, either a steel strip or wire body,jacketed with PVC or rubber. Those guarantee a tight grip on the edge, even if radiior bends have to be covered. In some profiles, the clamping effect is heightened by PVClips incorporated into the PVC jacket.
The edge protectors are pressed by hand or with a rubber or thermoplastic hammer onto theedge. Glues or special attachment aids are not required, installation is simple and quick.
Manufacturing tolerancesPVC according to DIN 16941 3BTolerances of custom length based upon DIN ISO 3300-L3/16941 4B
Minimum bending radiiPlease note that the minimum bending radii indicated are to be considered as guidelines which,depending on the material, clamping range and application of the profile used, may vary.
All profiles shown can be transformed into custom lengths, frames or rings.Different colours or materials such as food compatible, flame-resistant andself-extinguishing qualities upon request.
Issue 03/03
Ed
ge
Pro
tect
ors
14
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Edge protectors
Intr
od
uct
ion
a
b
d
c
Issue 03/03
Ed
ge
Pro
tect
ors
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
15
Sec
tio
ns
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
PVC with embedded steel base strip
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingradius [mm]
10
13
9
11.8
9
11.4
6
9
5.5
8
9
14
blackA1 009
A = 10
B = 10
C = 10
D = 10
0,8 - 1,5 100
A1 010
A1 011
A1 012
black
white
grey
B = 10
C = 10
D = 10
A = 10
1,0 - 2,0 100
A1 034
A1 014
A1 013 black
white
silver
A = 15
B = 15
D = 10
C = 101,0 - 2,0 100
blackA1 023/2
A1 023/4
A = 20
B = 20
D = 15
C =1 52,0 - 4,0
1,0 - 2,5100
blackA2 051
A = 20
B = 20
C = 15
D = 15
1,0 - 3,0 100
blackA3007B = 20
C = 20
D = 20
A = 30
1,0 - 4,0 100
A1 032with wire carrier 1,0 - 2,5black 50
D = 25
C = 25
A = 80
B = 80
6.5
9.5
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Issue 03/03
Ed
ge
Pro
tect
ors
16
Sec
tio
ns
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
PVC with embedded steel base strip
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingradius [mm]
10.5
16.5
16
10
10.5
14.5
10.5
14.5
15
10
10
14.5
10
17
A1 017
A1 016
A1 015
A1 022
1,0 - 4,0light grey
anthracite
white-grey
black
100C = 20
D = 20
B = 20
A = 30
A2 072* 2,0 - 5,0black 100
D = 20
B = 30
C = 20
A = 30
A1 044 2,0 - 5,0black 100
D = 20
C = 20
A = 40
B = 40
A1 021 2,0 - 5,0black 100
A = 40
D = 20
C = 20
B = 40
A1 037 1,0 - 4,0black 100C = 30
D = 30
B = 40
A = 50
A1 024/2
A1 024/6
A1 024/4
1,0 - 2,5
4,0 - 6,0
2,0 - 4,0black 100B = 40
D = 30
C = 30
A = 50
blackA1 018
A = 40
B = 30
C = 20
D = 20
2,0 - 4,0 100
Issue 03/03
Ed
ge
Pro
tect
ors
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
17
Sec
tio
ns
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
PVC with embedded steel base stripDesign Article reference Colour Clamping
range [mm]Sales unit
[m]Bendingradius [mm]
15
27
9.
11.4
16.5
18.2
15
12
black
A1 019/10
A1 020/10
A1 020/8
A1 019/8
A1 030
black
light grey
black
light grey
B = 40
C = 30
D = 30
A = 40
D = 40
A = 40
B = 40
C = 408,0 - 10,0
8,0 - 10,0
6,0 - 8,0
6,0 - 8,0
4,0 - 6,0
100
100
black
A2 033*
A = 200
B = -
D = 30
C = 30
1,0 - 2,5
2x501 - 2,5black
200
A = -
B = 100
D = 30
C = 30
A3129*with wire carrier
A3360*
A3281*
black
black
1,5 - 2,0
A = -
B = 40
D = 30
C = 30
A = -
B = -
D = 40
C = 40
9.4
30.6
13.6
200
501,5 - 2,0
10.2
16.6
9.3
PVC with embedded steel base strip
13
19
7.5
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Issue 03/03
Ed
ge
Pro
tect
ors
18
Sec
tio
ns
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingradius [mm]
22
32.4
9.3
8.7
24
13.3
1,0 - 3,0A2 063*
blackmit Drahtklemmband
A2 807* 1,0 - 3,0
black
grey
blackA1 075
A2 081
A2 813
A1 077
1,0 - 2,5
0,5 - 3,0
50
200C = 60
D = 100
A = 100
B = 200
100
50
D = -
C = -
A = 50
B = 50
D = -
B = 250
C = -
A = 150
D = -
C = -
A = 100
B = 150
ivory
grey
A2 805*
A2 804*1,0 -2,5 50,1
C = -
D = -
B = 50
A = 50
14
26,5
10
19.5
32
9
13
20.5
11.5
10
23
100
50
PVC with embedded steel base strip
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Issue 03/03
Ed
ge
Pro
tect
ors
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
19
Sec
tio
ns
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
DDeessiiggnn AArrttiiccllee rreeffeerreennccee CCoolloouurr CCllaammppiinnggrraannggee [[mmmm]]
SSaalleess uunniitt[[mm]]
BBeennddiinnggrraaddiiuuss [[mmmm]]
11
pearly whitewith wire carrier
A2 257*(TPE) 1,0 - 2,5 2x50
C = 40
D = 40
B = 120
A = 80
9
34
blackwith wire carrier
A2 814* 2,0 - 5,0 50C = 50
D = 50
A = 250
B = 150
PVC with embedded steel base strip
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Issue 03/03
Sp
on
ge
Ru
bb
erS
ealin
gs
20
Sp
on
ge
Ru
bb
erS
ealin
gs
All sponge rubber sealings shown on pages 21 and 22 can be combined at will with anyof the PVC edge protectors on pages 15 -19 to make an edge protection sealing. Thesponge rubber sealings' sections are printed on films and listed as pages 21a and 22a.By superposition of the film with the chosen edge protector you can design your own profileto suit your needs.
The articles you require are customized by us and can be delivered very shortly, if they arestandard profiles on stock.
All sponge rubber profiles are black, but can also be manufactured in light and dark grey uponrequest.
In the following example, the article with the reference # A1 032 of page 15 is combinedwith the sealing E2 575 of page 21a (= article #2 196 of page 27).
Sponge rubber sealings
14
9
Issue 03/03
Sp
on
ge
Ru
bb
erS
ealin
gs
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www. sandprofile.com
17
18,5
13.5
Sponge Rubber EPDM - black(for combination with the edge protectors from pages 15 - 19; please consider fitting area!)
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
DDeessiiggnnss
10,3
11.4
10,7
9 2 17
10
15
15
16
14.1
15.5
15.8
16.5
7.3
18.3
16,5
22.5
12,8
9.5
20.4
19.3
12.9
25.7
23.7 5.8
12.6
20.6
13
4,4
11,5
11,6
11
10 314
23
15
15
16.7 15
16.1
18.2 17 22,5
18 18.617
.4
20
20
24 19.6
16.7
15.6 17
,5
13,5
19.7
5.5
17,5
13,5
21.5
12
23.4
E2 5E2 558 E2 575 E2 609 *
E2 556 E2 605 E2 541 E2 594*
E2 548 E2 726* E2 570 E2 546
E2 701 E2 632* E2 563 E2 587*
E2 562 E2 6 E2 593
E2 581 E2 573 E2 576 E2 547*
E2 683
Sec
tio
ns
21
5.8
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www. sandprofile.com
Issue 03/03
Sp
on
ge
Ru
bb
erS
ealin
gss
22
Sec
tio
ns
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Sponge rubber EPDM - black(for combination with the edge protectors from pages 15 - 19; Please consider fitting area!)
13.515
.9
12.8
.5
DDeessiiggnn
7
3.1
14,4
15.8
13.1
14,4
5.8
18.4
33.5
4
6410.1
33.55
18.5
37.5
10.6
3.18
34
3
7,1
6.1
6 514
0
11.5
16.5
12.7
19.5
13,215,1
25
10.9
29,939
,8
16
20
,3
15
19.5
28
16
22
20
E2 595 E2 555 E2 553 E2 568
E2 559* E2 647 E2 657 E2 584*
E2 572E2 557E2 598*E2 582
E2 554 E2 583 E2 580 E2 618*
E2 707E2 659* E2 672*
Issue 03/03
Sea
ling
Pro
file
s
23
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www. sandprofile.com
Intr
od
uct
ion
Sealing profiles (frames and rings)
Sealing profiles are a combination of PVC edge protectors with bonded spongerubber profiles or a co-extrusion of solid and sponge rubber. These profiles have adual function, they cover sharp or unfinished edges and on also offer a sealing function.
The sponge rubbertubes are extremely flexible and are suitable for sealing doors, hatchesand numerous other applications. The assembly is similar to edge protectors.
Manufacturing tolerances
Soft rubber DIN ISO 3302-1 E2Sponge rubber DIN ISO 3302-1 E3Soft PVC DIN ISO 16941 3BCustom lengths DIN ISO 3300-1 L3/16941 4B
All profiles shown on the following pages are available in custom lengths, framesor rings, respectively.
Other colours and qualities such as food compatible, flame resistant or self-extinguishing qualities are available upon request.
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Issue 03/03
Sea
ling
Pro
file
s
24
Sec
tio
ns
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingradius [mm]
7.4
6.5
15.1
6.0
6.5
13.7
21
10.4
8.5
27.5
15
12.7
19.8
13.2
33.8
A1 107 1,0 - 2,0black 100
D = 10
C = 10
A = 20
B = 40
A2 158* 1,0 - 2,0black 100C = 10
D = 10
B = 40
A = 20
A1 102 1,0 - 4,0black 50
D = 15
B = 80
C = 15
A = 70
A1 117 1,0 - 4,0black 50C = 20
D = 20
B = 80
A = 60
black
A1 104/6
A1 104/2
A1 104/4
A = 80
B = 100
D = 20
C = 204,0 - 6,0
1,0 - 2,5
2,0 - 4,0 50
PVC with embedded steel base stripbonded to EPDM sponge rubber
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Issue 03/03
Sea
ling
Pro
file
s
25
Sec
tio
ns
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www. sandprofile.com
PVC with embedded steel base stripbonded to EPDM sponge rubber
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingradius [mm]
B = 100
C = 20
D = 20
A = 80
502,0 - 4,0blackA3126*
35
20
49
40
32.5
44
9
blackwire carrierwith PU-foam andA2 213*
1,0 - 2,5available inmax. length of2 m
B =
C =
A =
D = _
_
_
_
black65±5ShoreA
with EPDM softrubber tube
A2 125 B = 160
C = 40
A = 100
D = 40
2,0 - 4,0 25
33.8
10,5
19.8
15
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Issue 03/03
Sea
ling
Pro
file
s
26
24.7
38.5
10
9.6
11.5
24
14
28
15.5
14
A1 119 1,0 - 4,0black 50
D = 50
C = 50
A = 50
B = 150
A1 110 1,0 - 4,0black 50B = 150
D = 50
C = 50
A = 50
blackA2 127C = 30
D = 30
B = 150
A = 80
1,5 - 3,5 50
A2 307* 2,0 - 4,0black 50
A = 80
B = 120
D = -
C = -
Sec
tio
ns
20
22
12.5
10.5
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingradius [mm]
PVC with embedded metal stripbonded to EPDM sponge rubber
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Issue 03/03
Sea
ling
Pro
file
s
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
27
Sec
tio
ns
PVC with embedded steel base stripbonded to EPDM sponge rubber
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingradius [mm]
16
14.5
10
14.7
10
14.5
15.5
14
9
9.5
6.5
8.7
A1 109 black 501,0 - 4,0
D = 120
C = 100
A = 50
B = 40
A3079* black 4,0 - 6,0 50B = 40
D = 120
C = 100
A = 50
A2 128* 1,0 - 3,0black 50
D = 100
C = 80
B = 60
A = 80
A1 114 black 501,0 - 4,0C = 60
B = 40
D = 120
A = 50
with wire carrierA2 196* black 501,0 - 2,5
A = 80
B = 80
C = 80
D = 100
A1 101 black 1,0 - 2,0B = 15
C = 30
D = 50
A = 20
100
16
18.1
15,3
20,8
14.7
14.59
27.1
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Issue 03/03
Sea
ling
Pro
file
s
28
Sec
tio
ns
PVC with embedded steel base stripbonded to EPDM sponge rubber
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingradius [mm]
21.5
14.5
10
20
16
10
21.9
14.5
10.5
14.5
19.4
10
A1 108 black 501,0 - 4,0
A = 50
B = 30
C = 100
D = 120
A = 60
B = 40
D = 120
C = 100A2 255 black 1,0 - 4,0 50
A = 60
B = 40
D = 120
C = 100A2 254 black 2,0 - 5,0 50
A1 100 black 1,0 - 4,0 50C = 100
B = 30
D = 120
A = 50
A = 60
B = 50
C = 120
D = 120
A1 121/2
A1 121/4
A1 121/6 black
black
black
2,5 - 4,0
4,0 - 6,0
1,0 - 2,5
50
10.5
21.4
16
A = 80
C = 140
B = 80
D = 140
A2 142* black
22.8
15.8
11
4,0 - 6,0 50
Issue 03/03
Sea
ling
Pro
file
s
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
29
Sec
tio
ns
PVC with embedded metal base stripbonded to EPDM sponge rubber
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingradius [mm]
A = 60
C = 120
B = 60
D = 120
A1 123* black 2,0 - 4,0 50
D = 140
C = 140
B = 80
A = 80
A2 106/6
A2 106/4
A2 106/2
black
black
black
4,0 - 6,0
2,5 - 4,0
1,0 - 2,5
50
16
24.5
10.5
28
16
10
25
14.5
10 B = 40
C = 140
D = 140
A = 50
A1 162* black 1,0 - 4,0 50
26
14.5
10
A = 50
B = 40
C = 140
D = 140
A2 124* black 1,0 - 4,0 50
11.424
18
D = 120
C = 120
B = 60
A = 60A1 134/2
A1 134/4
A1 134/6
1,0 - 2,5
2,5 - 4,0
4,0 - 6,0
black
black
black
50
14.5
24.7
10.5
D = 120
C = 120
B = 60
A = 60
A2 248* black 2,0 - 5,0 50
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Issue 03/03
Sea
ling
Pro
file
s
30
Sec
tio
ns
PVC with embedded steel base stripbonded to EPDM sponge rubber
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingradius [mm]
17
14.5
20
10
A2 193* 2,5 - 4,0black *B = 100
D = 180
C = 180
A = 60
37.8
16.5
10.5
65±5ShoreA
A2 126with EPDM softrubber tube
2,0 - 4,0black 25
D = 180
C = 180
B = 60
A = 60
blackA2 174*
A = 60
B = 50
C = 120
D = 150
1,5 - 2,0 50
2,0 - 4,0A3072* 25
D = -
A = 50
B = 60
C = -
tube:black(available inother colours)
carrier:creamy white
grey-whiteA3339*with Butyl
A = 50
B = 60
C = -
D = -
502,0 - 4,0
3217.5
9
20.5
9
20.5
15.2
30,911
,2
35.9
14.5
Issue 03/03
Sea
ling
Pro
file
s
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
31
Sec
tio
ns
PVC with embedded steel base stripbonded to EPDM sponge rubber
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingradius [mm]
2,5 - 3,0A3052* black 50C = 30
D = 50
A = 40
B = 40
A2 256
A1 132
A1 103
1,0 - 4,0black 50C = 150
D = 150
B = 40
A = 40
1,0 - 3,5black 50
1,0 - 4,0black 50
D = 150
A = 40
C = 150
B = 40
C = 150
D = 150
B = 40
A = 40
A3073* 2,5 - 4,0black 25
16.1
10
14.5
14.5
16
10
D = 120
C = 120
A = 80
B = 160
14,5
15.4
16.3
10
10.5
20,8
10.6
8.3
19
35.110.5
21.1
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Issue 03/03
Sea
ling
Pro
file
s
32
Sec
tio
ns
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingradius [mm]
12.5
10
14.5
4
6.5
9.5
black
black
black
A1 105/6
A1 105/4
A1 105/2
D = 120
A = 80
B = -
C = 1204,0 - 6,0
2,0 - 4,0
1,0 - 2,5
25
25
25
blackA2 027*with plush
1,0 - 4,0 50
with beige felt
A2 028* 1,0 - 2,0black 200
D = 50
C = 20
A = 50
B = 50
D = 30
C = 20
A = 20
B = 20
44
10.5
16
25,8
PVC with embedded steel base stripbonded to EPDM sponge rubber
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Stand 03/03
Gis
taS
ealin
gs
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
33
Sec
tio
ns
EPDM with embedded wire carrierand hollow sealing section
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Sales unitDesign Article reference Colour Clampingrange [mm] [m]
Bendingradius [mm]
A1 513
black 1,0 - 3,0
D = 25
B = 120
A = 60
C = 25
black 1,0 - 3,0
D = 20
B = 60
A = 50
C = 20
A2 544
50
50
2x50
D = 25
B = 80
A = 50
C = 25
0,5 - 1,5
black
D = 25
B = 200
A = 50
C = 25
1,0 - 2,5
D = 25
B = 120
A = 60
C = 25
black
black7.2
15.2
8
6.5
15.6
8.4
A2 518
2x50
1,0 - 2,0
21
11
9
10.5
9.3
21
with steelbase strip
A1 512100
with steelbase stripand slidingvarnish coating
A3196*black 1,0 - 2,5 100
D = 25
B = 120
A = 60
C = 25
with steelbase strip
A1 517
21
9
1121
9,3
7,6
10,5
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www. sandprofile.com
Stand 03/03
Gis
taS
ealin
gs
34
Sec
tio
ns
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingradius [mm]
blackA2 513A2 513 NBRoil resistant
blackC = 150
D = 150
A = 80
B = -
1,0 - 3,0B = 180
D = 30
C = 30
A = 50
1,0 - 3,0
2x50
2x50A3180flame resistantbased on DIN 551020
.8
9.4
10
17
10.7
11
21.5
black 2,5 - 3,5C= 50
D= 30
A = 150
B = 100A328023
13.3
3
10.8
10.5
C = 100
D = 60
A = 100
B = 200black 1,5 - 3,5 2x50A2 54615
.5
9.6
26,6
50
EPDM with embedded wire carrierand hollow sealing section
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Issue 03/03
Gis
taS
ealin
gs
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
35
Sec
tio
ns
EPDM with embedded wire carrierand hollow sealing section
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingradius [mm]
D = 50
B = 120
A = 80
C = 8050
A1 538 black 1,5 - 3,5
D = 20
B = 180
A = 60
C = 205016
.6
9.8
27
A3152*without metalcarrier
black
10.5
30
19.3
14
2,0 - 3,0
A3225*with steelbase strip
black 2,0 - 3,0
D = 50
B = 200
A = 100
C = 50
12
30
15
10
50
blackA2 514 1,0 - 2,5B = 200
D = 60
C = 100
A = 100
100
16
10.5
28.5
C = 25
D = 25
A = 100
B = 180black 50
A2 516/2
A2 516/4
1,0 - 2,5
2,5 - 4,029.5
18
10.5
13
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Issue 03/03
Gis
taS
ealin
gs
36
Sec
tio
ns
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingradius [mm]
A1 525 black 1,0 - 3,0 50
D = 200
B = 250
A = 160
C = 200
18.7
15
30.7
black 1,0 - 2,0C= 40
D= 40
A = 80
B = 120A3289*with steelbase strip
10
19
20
32 50
A3321*
D = 40
B = 300
A = 80
C = 301,0 - 3,0black32
9.4
14
20.8
2x50
black 1,0 - 2,5 75A3127*with steelbase strip
D = 50
B = 150
A = 100
C = 50
22.3
10.2
16
33.8
EPDM with embedded wire carrierand hollow sealing section
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Issue 03/03
Gis
taS
ealin
gs
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
37
Sec
tio
ns
EPDM with embedded wire carrierand hollow sealing section
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
A3223* black 1,5 - 3,5
D = 40
B = 200
A = 80
C = 40
A3120*
50
50
D = 100
B = -
A = 100
C = -2,0 - 3,0black34
11
17
19
23
14.6
38.5
5,7
24.7
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingradius [mm]
blackC = 80
D = 80
A = 100
B = 1801,0 - 2,0 50
A3148*with steelbase strip
21
14
8
26
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Issue 03/03
Gis
taS
ealin
gs
Sec
tio
ns
A2 533 black 2,0 - 2,5 100
D = 80
B = 50
A = 60
C = 100
10
9
8
A2 545 black 1,0 - 2,0C = 20
D = 60
A = 20
B = 50
9.6
7.6
11
2,0A2 506S black 2x50B = 40
D = 60
C = 30
A = 3010.4
13.1
9.4
2,0black 50
D = 60
C = 30
B = 40
A = 30
A3240*flame resistantbased on DIN 5510
13.1
10.4
9.4
blackA2 507C = 100
D = 60
A = 40
B = 40
9.5
12.2
7.90,8 - 2,5 2x50
11.8
9
13
A1 550 NBRoil resistant
A1 549black 2,0
C = 120
D = 40
A = 50
B = 202x50
2x50
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingradius [mm]
EPDM with embedded wire carrierand hollow sealing section
38*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Issue 03/03
Gis
taS
ealin
gs
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
39
Sec
tio
ns
EPDM with embedded steel base strip orwire carrier and hollow sealing sections
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingradius [mm]
A3288*with steelbase strip
black 0,8 - 2,0
D = -
B = 150
A = 150
C = -
10.5
16
12.5
11
28.5
A1 536with wirecarrier
blackC = 180
D = 40
A = 40
B = 30
1,5 - 3,0A2 539with wirecarrier
black
B = 60
D = 80
C = 200
A = 8018.7
10.7
14.6
4x25
16
14.6
10.7
1,5 - 3,0
A3078*with steelbase strip
black 2,0 - 4,0 50
D = 80
B = 50
A = 60
C = 100
15
19
17.5
10.5
D = 100
A = 80
B = 80A3361/4*black
2,0 - 4,0
C = 18014.8
19
13
A = 80
D = -
B = 80
C = -
14.5
18.713
A3224/2
A3224/4
A3224/5
A3224/6with steelbase strip
3,0 - 5,0
75
2x50
black
75
50
75
5,0 - 6,0
2,0 - 4,0
1,0 - 2,5
75A3361/6*with wirecarrier
5,0 - 6,0
50
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone:+49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Issue 03/03
Gis
taS
ealin
gs
40
Sec
tio
ns
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingradius [mm]
black
19.711.5
16
A2 540
A2 541both with steelbase strip
2,0 - 4,025
C= -
D= -
A = 80
B = 120
blackA3297with wirecarrier
A= 100
B= 30
C= 120
D= 80
2,013.5
20
15
4.3
5.5
10.7
16
19.5 A = 50
D = -
B = 50
C = -
A3229with steelbase strip
1,0 - 4,0 50black
12.4
18
20,7
A3169*with wirecarrier
black 3,0 - 5,0 50
D=100
A= 70
C=120
B= 20
5,0 - 9,0A3114*with steelbase strip
black 50B = 60
D = -
C = -
A = 80
black
21.8
15
10.5A1 503
A2 558* (CR)both with steelbase stripoil resistant
1,0 - 3,5 4x25 B = 80
D = 200
C = 200
A = 200
4,0 - 6,0
50
17.5 15
15
21
EPDM with embedded wire carrierand hollow sealing section
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Issue 03/03
Gis
taS
ealin
gs
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
41
Sec
tio
ns
EPDM with embedded steel base strip orwire carrier and hollow sealing section
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingradius [mm]
black
A= 80
C=
D=
B= 1501,5-3,0 25
A2 554with steelbase strip
22.6
14.5
9.5
C = 200
D = 200
A = 200
B = 80
50black 1,0 - 3,5A3210*with felt andsteel base strip
21.810.5
15
1,5 - 3,5A2 548with wirecarrier
black 4 x 25C = 180
D = 40
A = 40
B = 30
blackA3348*with steelbase strip
C = -
D = -
A = 60
B = 60
5,0 - 6,0black 50
D = -
C = -
B = 60
A = 60
A3104*with steelbase strip
3,0A3145*with steelbase strip
black 50C = -
D = -
A = 90
B = 60
5,0 - 6,0 50
21.5
13.5
13
1015.415
14.5
13.8
23.913
26.5
10
16
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Issue 03/0342
Gis
taS
ealin
gs
Sec
tio
ns
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Design Article reference Colour Clampingrange [mm]
Sales unit[m]
Bendingrange [mm]
A3172with steelbase strip
black 1,5 - 3,0
D = 80
B = 60
A = 60
C = 8050
14
9
5
A1 502 black 1,0 - 2,0
D = 20
B = 200
A = 60
C = 20
9.2
20
8.3
A1 501 black 1,5 - 2,5
D = 70
B = 250
A = 60
C = 2524
13.3
8.7
50
50
A1 521 blackC = 25
D = 60
A = 80
B = 2501,0 - 3,016
.7
8.7
27.3
50
blackA1 500 1,0 - 2,5B = 250
D = 20
C = 20
A = 150
8.7
33
22.3
50
EPDM with embedded wire carrier
Issue 03/03
Gis
taS
ealin
gs
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www. sandprofile.com
43
Sec
tio
ns
EPDM with embedded wire carrier
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Colour Clampingrange [mm]
Sales unit Bendingradius [mm]
A = 80
D = 200
B = 40
C = 200
A = 80
B = 40
D = 200
C = 200
A = 80
C = 200
D = 150
A = 65
B = 601,0 - 2,5A1 520 black 50
D = 80
C = -
B = 40
A = 60
A3276* 502,0 - 3,0black
D = -
B = 120
C = -
16.8
9.6
14.4
black 1,0 - 2,5 100A2 523with steelbase strip
10
7
7.5
3.5 Beschichtung
Gleitlack-
13
1,0 - 2,0blackA3074 2 x 50
A3228*with slidingvarnish coating
black 0,5 - 2,0
18.5
8.7
13.9
18
16.5
10.8
14.2
15
9
A2 511 black 1,0 - 3,0
D = 180
B = 40
A = 80
C = 200
Design Article reference[m]
2 x 50
2 x 50
7.516
1013
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Issue 03/03
Gis
taS
ealin
gs
44
Sec
tio
ns
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
black 501,0-2,5C = 200
D = 200
A = 60
B = 180
A1 528*
C = 250
D = 150
A = 60
B = 40black 1,0 - 3,5 25A1 526
20
19.5
12
18.5
29.5
12
Design Article reference Colour Clampingrange [mm] [m]
Bendingradius [mm]
Sales unit
EPDM with embedded wire carrier
Issue 03/03
Gla
zin
gP
rofi
les
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
45
Our Delivery & Manufacturing Program includes glazing profiles fora window pane thickness from 2,5 to14 mm. For a professionalassembly you will need the corresponding filler section as well asthe assembly tool (tool set article reference # H1 000).
In case you can't find any suitable profile for your application, we areable to design your individual profile from a drawing or a sample to suityour application.
Vulcanized frames and rings
Upon request we are able to provide closed frames and rings.Our manufacturing is equipped with a variety of vulcanizing toolsin order to produce finished products. Small quantities can also beproduced at short notice.
Calculation of window pane dimensions
1. Core thickness „C“ up to 7mmSheet metal opening – 2 x „C“ – 2 x1 mm
2. Core thickness „C“ > 7mmSheet metal opening – 2 x „C“ – 2 x1,5 mm
3. Core thickness „C“ up to 7mmSheet metal opening – 2 x „C“ – 2 x1 mm
4. Core thickness „C“ over 7mmSheet metal opening – 2 x „C“ – 2 x1,5 mm
Glazing profiles
1 or 1,5mm
CWindow pane Metal sheet
Height of nose
1 or 1,5mm
Window pane Metal sheetC
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Gla
zin
gP
rofi
les
Sec
tio
ns
46 Issue 03/03*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
7
4.5
A
7.3
7
7.5
7.5
7.3
7.5
7.5
8.5
7.5
8.5
11
7.5
7.5
7.5
B1 159 7 3
B1 108
B1 139
B2 130
B1 104
B1 148
14
10
10
8
8
4
6
3
4
3
B2 173*
B1 113
B1 127
B1 123
B1 120
B1 106
B1 119
B1 114
B1 125
B1 103
B1 124
3.55.5
6
6
6
6
6
6
4
2.5
1.5
3
5.5
5
5
5
5
2
5
3
3
2
B1 110
B2 152*
B2 133
B1 134
B1 112
B1 142
B1 118
B1 121
B1 122
B1 107
B1 115
B1 102
B2 164
4.5
5
4.5
4
4
4
4
1.5
2
5
3
1.5
2
3
2.5
4
3
3
2.5
2.5
4.5
1.5
2
1
1.5
3
50
50
15
20
15
20
15
20
15
15
15
15
15
15
15
14.5
15
100 41520.5 12 8.5
9.5
12
9.5
9.5
29
24
25
23
22
11
12.5
12.5
12.5
12.5
10
100
100
100
120
120
950
570
620
600
600
10
9.5
9.5
8.7
9.5
9.5
9.5
10196
19
19
7
19
19
19
12.5
9.5 9
8
12.5
12.5
8
18.47
19
19
19
19
11
9
12.5
8
8
12.5
8
400100
100
100
100
90
100
390
435
350
400
410
100
90
100
100
90
360
460
400
410
345
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
50
52
32
15
20
50
25
20
15
20
25
20
17
11.5
8.7
11.5
16
12.6
5
7
4
15
16
7
7
18
16
16
6
7
9
5
6
7
8
6
11
7
7
7
7
17.87
11.6
10.2
4
4
4
13.6
17.97
7 16
10.5
3
5
4.5
6
3
6
10.5
7 7
80
100
35
80
80
100
80
300
350
150
300
270
405
230
100
35
20
35
100
80
340
145
165
95
360
300
3
3
2
3
3
3
3
3
2
1
2
3
3
B C D E F
3151009.5 43012.57.5 19.534B1 181
320807 23077 1634B2 122 (NBR)
B1 132* 6 10 22.77.5 12.5
435
9.5
100
15
3
Article
reference
Dimensions [mm] Bending
radius
Weight Salesunit[m]
FillerDesign
[mm]
[g/m]
B
EF
A
D
C
Glazing profiles (EPDM)
Gla
zin
gP
rofi
les
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.coi
47
Sec
tio
ns
25
12.5
3
8.5
12
7.5
Design Articlereference
Bendingradius [mm]
Weight[g/cm]
Sales unit[m]
Filler
Glazing profiles (EPDM)
Issue 03/03*Upon request - Other profiles on stock.
Other colours and materials upon request - Design modifications reserved
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Gla
zin
gP
rofi
les
Sec
tio
ns
48 Issue 03/03*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
Design Weight[g/m]
Sales unit[m]
Bendingradius [mm]
D1 123 100 360 25 -
B2 162* 100 860 8 -
B1 155 100 520 18 3
Filler
40
15.5
37.7
7
4
13
31.512
3
32.5
13.5
6.5
Articlereference
24
5.5
8.5
5.5
10
14
Glazing profiles (EPDM)
Gla
zin
gP
rofi
les
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
49
Sec
tio
ns
Design Weight[g/m]
Salesunit [m]
Bendingradius [mm]
FillerArticlereference
23.5
40
4
31
9
B2 158 100 460 25 3
B2 167* 150 1330 20
-
B2 163* 150 1220 30 -22.5
62
15
50
35
17
22
40
22
72
60
22.5
39.5
Glazing profiles (EPDM)
Issue 03/03*Upon request - Other profiles on stock.
Other colours and materials upon request - Design modifications reserved
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.co
Fill
erp
rofi
les
Sec
tio
ns
50 Issue 03/03*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
3
3
3
3
3
2
3
1 EPDM
EPDM
EPDM
9.5
9.5
9.5
9.5
9.5
C1 253
C1 254
C1 250
C1 251
C1 252
7.5
7.5 PVC
PVC
7.5
7.5
7.5
PVC
PVC
PVC
5.5
9.5
7.0C1 201
C1 202
C1 200
H
6.0
7.5
4.5
W
40
40
40
40
40
red
white
black
silver
ivory
100
100
100
100
100
18
28
50
black
black
black
50
50
50
Articlereference [g/m]
ColourDimensions[mm]
Material Weight Salesunit[m]
FillerDesign
H
W
Filler profiles
Gla
ssR
un
Ch
ann
els
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.comGa
51
Sec
tio
ns
Issue 03/03*Upon request - Other profiles on stock.
Other colours and materials upon request - Design modifications reserved
Glass run channelsEPDM - with flock
blackD2 335*
blackEPDM 50
black
black
EPDM
EPDM
EPDM
50
50
200
D2 178* blackEPDM *
EPDMdesigns*In various
*
D2 301*with steelbase strip
D2 358*
klemmbandmit Stahl-
D2 302*with steelbase strip
Design Article reference Material Colour Sales unit
[m]
black
5.5
12
10.5
3
11
12
11.5
13.5
13
12
13
12
10.5
10.5
13,5
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Ed
gin
gp
rofi
les
Sec
tio
ns
52 Issue 03/03*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
D1 010
Article reference Sales unit[m]
Design
4
1.5
710 100
7.5
15
4
12.5 D1 028
5
2
8 6
100
100
10
6
3
8.5 D1 011
D1 020
100
100
4
8
7
6.5 D1 021
100D1 022
100
8
5
10 8.5 D1 012
8
5
15
13.5
Material Colour
EPDM
EPDM
EPDM
EPDM
EPDM
EPDM
EPDM
black
black
black
black
black
black
black
Edging profilesEPDM - black
Ed
gin
gP
rofi
les
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
53
Sec
tio
ns
Issue 03/03*Upon request - Other profiles on stock.
Other colours and materials upon request - Design modifications reserved
Edging profilesEPDM - black
D1 014
Article reference Sales unit[m]
Design
100
D1 024 100
100
D1 025
D1 034
50
100
D1 015
50D1 013
40D1 026
6
4
11.5
10.5
13
6
3
11.5
9
5
16 14
11
6
18
15.5
10
20
6.5
18.2
5
14
8
21
18
13.5
9
19.5
6
Material Colour
EPDM
EPDM
EPDM
EPDM
EPDM
EPDM
EPDM
black
black
black
black
black
black
black
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Do
or
Sea
ling
Pro
file
sS
ecti
on
s
54 Issue 03/03*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
EPDMD2 274*
8.5
13
7.5
G1 101
G1 104
PVC
PVC
200black
EPDM
12
7.6
18
D1 127 100black
140
140
black
black
G1 108 PVC 100black
Design Article reference Material Colour
G1 106 PVC 140black
Sales unit
[m]17
11
9.5
11.5
11
19.5
11
21.5
13.5
19,5
11
27,5
Door Sealing ProfilesSoft PVC and EPDM
Do
or
seal
ing
pro
file
s
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
55
Sec
tio
ns
Door sealing profilesSoft PVC and EPDM
Issue 03/03*Upon request - Other profiles on stock.
Other colours and materials upon request - Design modifications reserved
D2 311* EPDM 200schwarz
Ausführung Artikel.-Nr. Werkstoff Farbe
19.4
6.3
8Verkaufs-
einheit [m]
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Fin
ger
gu
ard
pro
file
sS
ecti
on
s
56 Issue 03/03
*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
blackD2 421* 20018
14.5
1.8
513
black
25
2
16
7.5
24.5
G2 011* PVC 40
Design Article
reference
Material Colour
black
9
19.8
2.5
24
28 D1 133 EPDM 30
black
24
2.5
40
9
19.8
D1 128 EPDM 30
Sales unit
[m]
EPDM
Finger guard profiles
Fin
ger
Gu
ard
Pro
file
s
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
57
Sec
tio
ns
Finger guard profiles
Issue 03/03*Upon request - Other profiles on stock.
Other colours and materials upon request - Design modifications reserved
Design Article
reference
Material Colour
black
24
2.5
55
9
19.8
D1 135 EPDM 30
D2 407* black 50
7.5
16
20
3015
24.5
24.5 EPDM
Sales unit
[m]
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Sp
ecia
lPro
file
sS
ecti
on
s
58
Design Article
referenceMaterial Colour
D2 166* EPDM black 40
D2 167 EPDM black 40
10
4
4.9
2.2
Sales unit
[m]
33.5
10
10
2.5
36
25
37.5
D2 230* EPDM black 60 pcsof 3 m
G2 125* PVC black 40
37.5
13.5 9
22.5
10
D1 159 EPDM black 300
33.5
11.7
10
7.7
18.4
Special profiles
Issue 03/03*Upon request - Other profiles on stock.Other colours and materials upon request - Design modifications reserved
33.5
19.1
Stand 03/03
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
No
tes
60
Notes
Issue 03/03
Sp
on
ge
Ru
bb
erP
rofi
les
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
Intr
od
uct
ion
61
Introduction
Sponge rubber profiles from EPDM, CR, NBR , NR in various colours
Sponge rubber is a cellular, softly elastic material made of caoutchouc. During vulcanization the materialinflates forming a partly open and partly closed cell structure as well as on its surface, a compact outermembrane.
The specific weight of sponge rubber varies according to its quality from 0.4 to 0.8 gram per cm². Spongerubber is produced among others from Natural Rubber (NR), Chloroprene Rubber (CR), Nitrile- ButadieneRubber (NBR) or Ethylene-Propylene-Diene Monomer (EPDM). The choice of an elastomer qualityshould be guided by its use and the requirements of the end product.
Sponge rubber products are manufactured in many different processes either by vulcanization in mouldsor by extrusion.
Moulded parts or profiles of sponge rubber are light and resistant. Today, sponge rubber products orprofiles combined with other rubber qualities or materials such as PVC, are used whenever sealingrequirements are most important.
Round, semi-round and square cords as well as special profiles
All sponge rubber profiles available have a normal compact outer membrane.
Sponge rubber profiles can be equipped with self-adhesive for easier assembly. Profiles with AcrylicFoam adhesion are available upon request.
Issue 03/03
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Sp
on
ge
Ru
bb
erP
rofi
les
Ro
un
dC
ord
s
62
2, 0 200 ● ● ●
2, 5 200 ● ● –3, 0 200 ● ● ●
3, 5 200 ● ● –4, 0 200 ● ● ●
4, 5 200 ● ● –5, 0 200 ● ● ●
6, 0 200 ● ● ●
5, 0 200 ● ● ●
7, 0 200 ● ● ●
8, 0 200 ● ● –9, 0 200 ● ● ●
10, 0 100 ● ● –11, 0 100 ● ● ●
12, 0 200 ● ● –13, 0 50 ● ● –14, 0 50 ● ● ●
15, 0 50 ● ● ●
16, 0 50 ● ● ●
18, 0 25 ● ● ●
20, 0 25 ● ● ●
22, 0 25 ● ● ●
25, 0 25 ● ● ●
30, 0 20 ● ● ●
35, 0 20 ● ● ●
40, 0 20 ● ● –45, 0 10 ● ● –50, 0 10 ● ● –
●
–
Dimensionsmm
Bulk lengthm
EPDMblack
EPDMlight-grey
CRblack
available
upon request
Round cords
Delivery time: immediately if on stock; subject to being sold. Self-adhesive equipment ~ 2 weeks.Other colours, quantities and sections upon request. Design modifications reserved.
Issue 03/03
Sp
on
ge
Ru
bb
erP
rofi
les
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
63
Sq
uar
eP
rofi
leC
ord
s
Square profile cords
Delivery time: immediately if on stock; subject to being sold. Self-adhesive equipment ~ 2 weeks.Other colours, quantities and sections upon request. Design modifications reserved.
Dimensions Bulk length EPDMblack
EPDMlight-grey
CRblack
Self-adhesiveon broader sidemm m
2 x 8 100 � � � �
2 x 10 100 � � � �
2 x 15 100 � � � �
2 x 20 100 � � – �
2 x 25 50 � � – �
2 x 50 50 � � – �
3 x 5 100 � � – �
3 x 10 100 � � � �
3 x 15 100 � � � �
3 x 18 100 � � � �
3 x 20 100 � � � �
3 x 30 50 � � � �
3 x 40 50 � � – �
3 x 50 50 � � – �
4 x 6 100 � � – �
4 x 8 100 � � � �
4 x 10 100 � � � �
4 x 12 100 � � � �
4 x 15 100 � � � �
4 x 20 100 � � � �
4 x 25 50 � � – �
4 x 30 50 � � � �
4 x 40 50 � � – �
4 x 50 50 � � – �
5 x 5 100 � � � �
5 x 10 100 � � � �
5 x 12 100 � � – �
5 x 15 50 � � � �
5 x 20 50 � � � �
5 x 25 50 � � � �
5 x 30 50 � � � �
5 x 40 50 � � � �
5 x 50 25 � � � �
5 x 60 25 � � – �
6 x 6 100 � � � �
6 x 10 100 � � � �
6 x 12 100 � � � �
6 x 15 100 � � � �
6 x 20 50 � � � �
6 x 25 50 � � � �
6 x 30 50 � � – �
6 x 35 25 � � � �
6 x 40 25 � � – �
6 x 50 25 � � – �
� available
– upon request
Issue 03/03
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Sp
on
ge
Ru
bb
erP
rofi
les
Sq
uar
eP
rofi
leC
ord
s
Delivery time: immediately, if on stock; subject to being sold. Self-adhesive equipment ~ 2 weeks.Other colours, qualities and sections upon request. Design modifications reserved.64
Dimensions Bulk length EPDMblack
EPDMlight-grey
CRblack
Self-adhesiveon broader sidemm m
7x10 100 � � – �
7x15 50 � � – �
7x20 50 � � – �
8x8 100 � � � �
8x10 100 � � � �
8x12 50 � � � �
8x15 50 � � � �
8x16 50 � � � �
8x18 50 � � � �
8x20 50 � � � �
8x25 50 � � � �
8x30 50 � � � �
8x40 50 � � – �
8x50 50 � � – �
9x16 50 � � – �
9x23 50 � � – �
10x10 50 � � � �
10x12 50 � � � �
10x15 50 � � � �
10x16 50 � � � �
10x18 50 � � � �
10x20 50 � � � �
10x25 50 � � � �
10x30 25 � � � �
10x35 25 � � – �
10x40 25 � � � �
10x50 25 � � � �
10x60 25 � � – �
10x70 25 � � – �
11x11 50 � �
11x17 50 � �
12x12 50 � � � �
12x15 50 � � � �
12x20 50 � � � �
12x25 50 � � � �
12x40 25 � � – �
15x15 50 � � � �
15x20 25 � � � �
15x25 25 � � � �
15x30 25 � � � �
15x35 25 � � – �
15x40 25 � � � �
15x45 25 � � – �
15x50 25 � � – �
16 x30 25 � � � �
18x18 25 � � � �
18x25 25 � � � �
� available
– upon request
Square profile cords
Issue 03/03
Sp
on
ge
Ru
bb
erP
rofi
les
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
65
Sq
uar
eP
rofi
leC
ord
s
Square profile cords
Delivery time: immedeately if on stock; subject to being sold. Self-adhesive equipment ~ 2 weeks.Other colours, quantities and sections upon request. Design modifications reserved.
Dimensions Bulk length EPDM black EPDM light-grey CRblackmm m
Self-adhesive onbroader side
20 x 20 25 � � � �
20 x 25 25 � � � �
20 x 30 25 � � � �
20 x 40 25 � � � �
20 x 45 25 � � – �
20 x 50 25 � � � �
20 x 60 10 � � � �
25 x 25 25 � � � �
25 x 30 25 � � � �
25 x 35 25 � � – �
25 x 40 25 � � � �
30 x 30 20 � � � �
30 x 40 15 � � � �
30 x 50 15 � � � �
40 x 40 10 � � � �
40 x 50 10 � � – �
45 x 50 10 � � – �
50 x 50 10 � � – �
� available
– upon request
Issue 03/03
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Sp
on
ge
Ru
bb
erP
rofi
les
Sp
ecia
lPro
file
s
66
Art. ref. # E1 512 D
Art. ref. # E1 515D
Art. ref. # E1 520D
Art. ref. # E1 524D
Art. ref. # E1 504D
Art. ref. # E1 514 D
Art. ref. # E1 521D
Art. ref. # E1 501D
Art. ref. # E1 511 D
Art. ref. # E1 519 D
Art. ref. # E1 500 D
Art. ref. # E2 503 D*
Art. ref. # E1 516 D
Special ProfilesEPDM - black
Other colours and materials upon request. Design modifications reserved.
Issue 03/03
Sp
on
ge
Ru
bb
erP
rofi
les
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone. +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
67
Sp
ecia
lPro
file
s
Delivery time: immediately if on stock; subject to being sold. Self-adhesive equipment ~ 2 weeks.Other colours, quantities and sections upon request. Design modifications reserved.
Special profilesEPDM - black
Art. ref. # E1 526 D Art. ref. # E1 523 D
Art. ref. # E1 530 D
Art. ref. # E1 503 D
Art. ref. # E1 522 D
Art. ref. # E1 517 D
Art. ref. # E1 506 D
Art. ref. # E2 705 D*
Art. ref. # E1 510 D
Art. ref. # E1 509 D
Issue 03/03
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Sp
on
ge
Ru
bb
erP
rofi
les
Sp
ecia
lPro
file
s
68
Article reference Bulk length EPDM EPDM[m] black light-grey
E1 500 D 50 � –E1 501 D 50 � –E1 503 D 50 � –E1 504 D 50 � –E1 506 D 50 � –E1 509 D 50 � –E1 510 D 50 � –E1 511 D 50 � –E1 512 D 25 � –E1 514 D 25 � –E1 515 D 50 � –E1 516 D 100 � –E1 517 D 50 � –E1 519 D 50 � –E1 520 D 50 � –E1 521 D 50 � –E1 522 D 50 � –E1 523 D 15 � –E1 524 D 50 � –E1 525 D 50 � –E1 526 D 50 � –E1 530 D 50 � –E2 503 D 100 � –E2 705 D 100 � –
� on stock
– upon request
Special profiles
Delivery time: immediately if on stock, subject to being sold. Self-adhesive equipment ~ 2 weeks.Other colours, quantities and sections upon request. Design modifications reserved.
Issue 03/03
Ord
erF
orm
69
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 Stockstadt
Phone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60
E-Mail: [email protected]: www.sandprofile.com
Del
iver
y&
Man
ufa
ctu
rin
gP
rog
ram
Order Form - per Fax to ++49 (0) 6027 / 4160 - 60
Company: Dept.:
Name: Surname:
Street:Zip Code/City:
Country:
Phone: Fax:
E-mail: Internet:
Order #:
SAND article reference: Quantity: Delivery date:
SAND article reference: Quantity: Delivery date:
SAND article reference: Quantity: Delivery date:
Address for delivery:
Please provide me with the following information:
Date: Signature:
Automotive SAND production facilities
Catalog on CD-Rom
Company
Products forCaravans & RVs
Products for agriculturalmachines and cabin manufacturers
Comment:
Issue 03/03
Sta
nd
ard
Term
san
dC
on
dit
on
so
fS
ale
70
SAND Profile GmbHDr.-Patt-Str. 9-11, D-63811 StockstadtPhone: +49 (0) 60 27 41 60-0Fax: +49 (0) 60 27 41 60 60E-Mail: [email protected]: www.sandprofile.com
Standard Terms and Conditions of Sale1. Exclusive Applicability and Recognition of our Standard Terms and
Conditions of Sale1.1 All offers made by us shall be subject to our Standard Terms and Conditions of Sale. We
only accept orders on the aforesaid Standard Terms and Conditions. General terms andconditions of the Buyer and ancillary agreements which deviate from our StandardTerms and Conditions of Sale shall only be binding if we have expressly recognisedthem in writing.The following terms and conditions shall apply exclusively for the sale of all products inour production and distribution range. The aforesaid terms and conditions govern alllegal relationships concerning the sale unless otherwise agreed in writing. Terms andconditions of business contrary to our terms and conditions must be expresslyconfirmed by us in writing in order to be valid.
1.2 With the order placement and acceptance of deliveries, the Buyer recognises theapplicability of our Terms and Conditions of Sale not only for the business transaction inquestion, but also for all future business transactions.
2. Offers, Orders and Deliveries2.1 Offers: Our offers are subject to change without notice. Documents forming part of the
offer such as illustrations and drawings, etc., shall only be regarded as precise as far asdimensions and weights are concerned if this has been expressly confirmed in writing.We shall reserve the proprietary right and copyright to such documents. They may notbe made available to third parties without our consent. They are to be returned to usimmediately if no order is placed.
2.2 In cases of doubt, our written order acknowldgement shall be exclusively authoritative forthe details of the contract.
2.3 In case of make and hold orders in which the bulk order contract does not specify anyfixed buying period, the complete bulk order quantity has to be bought within 2 years.
2.4 We shall reserve the right to refuse orders without providing reasons or to deliver on ac.o.d. basis.
3. Telephonic OrdersTelephonic orders shalle be immediately confirmed by the Customer in writing. We shallssume no liability for the correctness of deliveries based on telephonic orders.
4. Scope of the Delivery ObligationOur written order acknowledgement based on the order shall apply for the scope, typeand date of delivery. Over- or under-deliveries of up to 10% of the ordered quantity shallnot be rejected by the Customer. Part-deliveries shall be permitted. Unless otherwiseagreed in the contract, the Customer must forward a delivery allocation schedule to usat least 4 weeks prior to the agreed delivery date.
5. DispatchUnless we receive special dispatch instructions, we shall ship goods by the mosteconomical dispatch route at our discretion. Goods shall be dispatched for the accountand at the risk of the Buyer even if we execute the transport function with our ownvehicles or if we bear or prepay the transport costs.
6. Delivery DateWe shall make every effort tro comply with agreed delivery dates. If we are, however,prevented from complying with such delivery dates as a result of unforeseeablecircumstances which we could not avert despite reasonable care based on thecircumstances of the individual case, e.g. labour disputes, commotion, actions by theauthorities, production stoppages, delays with the delivery of major raw materials andsupplies, the delivery period shall be reasonably extended without it being possible forclaims to be made against us as a result of the above.If the aforesaid circumstances occur at the Customer's, the same legal consequencesshall apply for his acceptance obligation.
7. PricesThe prices in force on the date of delivery shall apply unless otherwise agreed. Freight,packaging, insurance, customs duty and other expenses, including expenses for thepayment of documents required for the importation of goods into the country ofdestination shall be borne by the Buyer.All prices are stated exclusive fo value-added tax.
8. Payment8.1 We shall issue an invoice as soon as the ordered goods are ready for despatch or
collection. Despatch delays or delays in the collection of goods which are notattributable to us shall not postpone the due date of the relevant invoice.
8.2 Our invoices are payable within one week with 2% cash discount or within 30 days net,in both cases with effect from the invoice date.
8.3 Deviations shall only be accepted with a written confirmation.8.4 Bills of exchange are not accepted by us as a means of payment. Cheques are only
accepted by us as conitional payment.8.5 If we accept cheques or bills of exchange, this shall always be done as conditional
payments but not as settlements. In such cases, we are not responsible for duepresentation or protesting. Discount, taxation and collection costs shall be for theaccount of the Buyer. The Buyer shall reimburse the aforesaid amount ot usimmediately upon rquest. If the Buyer defaults with the payment of the purchase price,interest shall be charged on the relevant debt at a rate equivalent to 8% above thediscount rate of the ECB. We shall reserve the right to make deliveries on a c.o.d. basis.Tooling costs shall be payable net upon submission of the reference sample.
9. Reservation of TitleWe shall retain our title to the delivered goods as long as claims arising from thebusiness connection with the Buyer have not been settled in full. In the event of
adaptation or processing of goods delivered by us, any acquisition of title by the Buyershall be excluded. Adaptation or processing work shall be carried out for us in such away that we are to be regarded as manufacturer. If the delivered goods are processedwith other good from another source which are also subject to a reservation of titleextending to processing of the said goods, we shall acquire co-ownership in the newchattel in the ratio of the invoice value of our goods compared with the value of theother goods at the time of processing.All claims of the Buyer arising from a resale of goods in which we have a title or co-titleshall pass to us upon the conclusion of the sale contract, regardless whether the goodsare sold without or with adaptation or processing, combination or intermingling andregardless of whether they are sold to one or several buyers. If the sold goods do notbelong to us in full or if they are sold together with goods not belonging to us, theassignment shall only include the counterclaim in the amount of the invoice value of ourgoods.If the Buyer is in default in whole or in part with the settlement of a liablity secured bythe reservation of title, or if we become aware of circumstances which indicate that ourrights could be endangered, we shall be entitled to demand a return of the goodsdelivered by us without declaring the prior withdrawal from the sale contract inaccordance with § 449 of the German Civil Code (BGB) or without having set a periodof grace for the settlement fo payment obligations in accordance with §223 BGB. Thevalidity of the sale contract and the obligations of the Buyer shall remain unaffected bythe aforesaid request and by the return of the goods in question.At the request of the Buyer, we shall, at out choice, be obliged to release securities towhich we are entitled on the basis of the above rulings (goods and claims) if their valueexceeds the claims to be secured by more than 20 percent.
10. Tools Dies and Production EquipmentPressing and injection moulds, or any other moulds and tools which are produced by usor by any other party on our behalf shall basically remain our property in view of thedesign performance.If no subsequent order is received within 2 years of the execution of the last order, andif no subsequent order is anticipated, we shall be entitled to dispose of the tools, dies orany other equipment at our discretion.
11. WarrantyWe shall assume the following warranty to the Buyer:11.1 We guarantee a lack of defects in the materials and workmanship in line with thelatest state of the artfor a period of 12 months with effect from the date of delivery of thegoods to the Buyer.In case of a justified notice of defects - the reference samples released by the Buyer inwriting determining the expected quality and execution - the supplier is compelled toremedy.The supplier has the right either to eliminate the defect or to deliver a good withoutdefect. If the supplier does not not comply with this obligation within due time or if theattempt to remedy fails repeatedly, the Buyer has the right to diminish the buying priceor to retreat from the contract. Further claims, mainly claims of compensation forexpenses or claims of damage compensation due to defect or resulting from a defect,arise if and only if a damage to life, body or health is attributed. The liability without faultaccording to the law relative to "Liability for Defective Products" remains unaffected.The liability for the faulty contravention against major contract obligations remainsunaffected, too. However, the liability remains restricted, except for cases mentioned in§1, to the foreseeable, typical contract-related damage. A change of burden of proof atthe expense of the Buyer is implied by the aforesaid regulations.
11.2 If we expressly recognize a warranty case, the costs of the cheapest form of transportshall be for our account. Basically, no additional costs are assumed on account of thefact that the goods were taken outside the Federal Republic of Germany.
11.3 Additional claims shall be excluded.11.4 All warranty claims shall lapse in the event of improper handling, storage, return goods
not sent in their original packaging and processing with unsuitable materials.11.5 If rubber profiles are delivered, the guidelines specified in DIN 7716 shall apply for the
storage, servicing and cleaning of goods. We shall assume no liability for damagescaused by non-compliance with the aforesaid regulation.
11.6 The current DIN standards for thermoplastics and elastomers shall apply for thedimensions of the cross-section and lengths.
11.7 Warranty claims shall only be taken into account if they are immediately notified to us inwriting after a defect has been established.
11.8 We shall assume no liability for the ordered goods being suitable for the intendedpurpose of the Buyer. Such an examination shall be the responsibility of the Buyer. Weshall not be liable for errors attributable to documents which were incorrectly submitted.
12. Other provisions12.1 Place of performance and legal venue
The place of performance for deliveries or services to be performed is the domicile ofthe delivery plant in question.The legal venue is Aschaffenburg.
12.2 Applicable lawThe statutory regulations of the Federal Republic of Germany shall irrevocably applyunless otherwise agreed.
12.3 Partial invalidityIf one of the provisions included in these Terms and Conditions or connected with anorder in any other way are invalid, the validity of the other provisions shall remain in fullforce and effect. The invalid provision shall be replaced by a valid provision whichcomes as close as possible to the original intention of the invalid provision.
13. Data Processing AuthorityWe shall be entitled to process all data relating to the Buyer protected by law within thescope of the relevant legal regulations.