SYSTEM MODEL #: DATE / /
PROJECT
TYPE
HIGHBAY INDUCTION CONVERSION SYSTEM KIT - CIRCULAR
SPECIFICATIONS COMMON TO ALL DISC GENERATORS
Highbay Acrylic Refractor Assembly
STEP DOWN TRANSFORMER OPTIONS
Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please reference the Fulham product catalog (www.fulham.com)Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or constructionto the equipment described.
Model 822
13.40” Height
22” Bottom Diameter
Model 825
13.96” Height
25” Bottom Diameter
Model 816
10.9” Height
16” Bottom Diameter
10.06” Top Diameter10.06” Top Diameter 6.3” Top Diameter
Weight (lbs)
2.3
5.3
7.2250W-400W
Transformer Model
HH-ILS-SD-1-125VA
HH-ILS-SD-2-245VA
HH-ILS-SD-3-460VA
Induction System Wattage
35W-100W
120W-200W
0.070 A
0.080 A
0.220 A
Input Current Max Load Input Current (No Load)
0.26 A
0.57 A
0.96 A
Losses
7W
10W
18W
2011-279-1 Rev I
Input Voltage 120V-277V EMI/RFI Compliance FCC Part 18-A
Voltage Fluctuation Tolerance ±10% Sound Rating Class A
Input Frequency 50/60 Hz Type 1 Outdoor
Output Frequency <250K Hz Surge Protection** Yes (Reference hi-pot test footnote)
THD < 10% Max. Remote Distance*** 7 ft. (84”) (Reference Wiring Footnote)
Power Factor > 0.95 Wiring Plug-n-Play Connectors
Constant Wattage Output <5% Wire Rating 150°C 600V (Lamp Wire Shielded)
Case Temp. < 65°C Electrostatic Discharge (ESD) IEC 61000-4-2:Class 4
Operating Temp. Open Fixture 0°C to 50°C Electrical Fast Transient/Burst(EFT) IEC 61000-4-4: Level 4
Operating Temp. Closed Fixture -20°C to 50°C Surge Immunity IEC 61000-4-5: Class 4
Step-Down Transformer Housing Kit (HHILPQ32840) is required to enclose any of the Step-Down Transformers listed above.
Step-Down Transformer Housing Kit is UL Classified.
E333512
SYSTEM MODEL #: DATE / /
PROJECT
TYPE
HIGHBAY INDUCTION CONVERSION SYSTEM KIT - CIRCULAR
2011-279-2 Rev I
RETRO KIT SYSTEM PARTS
Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please reference the Fulham product catalog (www.fulham.com)Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or constructionto the equipment described.
With Without
Yes YesYes YesYes YesYes Yes
YesYes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
YesYes
YesNo
HH-ISK-C400-HB-22
HH-ISK-C400-HB-22M400W 822/825 (22"/25" Refractor)
40ºCN/A
30ºC
50ºC
50ºC
50ºC
45ºC
40ºC
822/825 (22"/25" Refractor)
822/825 (22"/25" Refractor)
822/825 (22"/25" Refractor)
822/825 (22"/25" Refractor)
822/825 (22"/25" Refractor)
120W
150W
200W
250W
300W
HH-ISK-C120-HB-22
HH-ISK-C150-HB-22
HH-ISK-C150-HB-22MHH-ISK-C200-HB-22
HH-ISK-C200-HB-22MHH-ISK-C250-HB-22
HH-ISK-C250-HB-22MHH-ISK-C300-HB-22
HH-ISK-C300-HB-22M
HH-ISK-C100-HB-22
HH-ISK-C100-HB-22M100W 822/825 (22"/25" Refractor) 50ºC
HH-ISK-C150-HB-16 150W 816 (16" Refractor)
HH-ISK-C70-HB-22
HH-ISK-C70-HB-22MHH-ISK-C80-HB-22
70W
80W
822/825 (22"/25" Refractor)
822/825 (22"/25" Refractor)
50ºC
50ºC
45ºC40ºC
HH-ISK-C100-HB-16 100W 816 (16" Refractor) 50ºCHH-ISK-C120-HB-16 120W 816 (16" Refractor) 50ºC
HH-ISK-C70-HB-16 70W 816 (16" Refractor) 50ºCHH-ISK-C80-HB-16 80W 816 (16" Refractor) 50ºC
Induction System Kit
P/NWatts Acrylic Refractor Diameter Ambient Certified
Bottom Lens
A 1
B 1
C 1
D 1
E 1
F 4
G 4
H 1
I 1
J 1
K 1Acrylic Pris tm atic Bottom D iffuser - O riginal Part
8-32 x 1/2" Pan Head Machine Screws w / Hex Nuts
3/8-16 x 1" Hex Bolt w / Hex Nut
Acrylic Prism atic Refrac tor - O riginal Part
C ircular Lam p
Disc Ballas t Mount Plate
High-Bay Lam p Bracket
High-Bay Refrac tor Mount Plate (Collar)
M4-0.7 x 12m m Pan Head Machine Screws
W ire Bushing
ITEM DESCRIPTIO N Q TY
Disk Ballas t
B
C
D
E
F
G
G
H
H
I
A
J
K
Note: -Induction System Kit includes items A-H and J (excluding Part I and K)
parts of the original fixture. These parts are not included in the retrofit kit.
-Acrylic Refractor (Part I) and Acrylic Prismatic Bottom Diffuser (Park: K) are
-Acrylic Prismatic Bottom Diffuser (Part: K) is optional.
HH = HIGHHORSE ISK = INDUCTION SYSTEM KIT C = CIRCULAR
B = BULB
HH ISK C 200 HB 16 MSYSTEM WATTS REFRACTOR SIZE
16 = 16 INCHES22 = 22/25 INCHES
FIXTURE TYPE DIMMINGLAMP TYPEHB = HIGH BAY M = DIMMING 0-10V
E333512
SYSTEM MODEL #: DATE / /
PROJECT
TYPE
HIGHBAY INDUCTION CONVERSION SYSTEM KIT - CIRCULAR 150W
Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please reference the Fulham product catalog (www.fulham.com)Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or constructionto the equipment described.
IES INDOOR REPORT - CHARACTERISTICS
1.38 ft
12,000 - 12,750lm (1 lamp)
12,000 - 12,750lm
9,832lm
76% - 82%
69
142.22
1.00
Semi-Direct
1.20
1.20
1.32
Circular w/ Sides
1.80 ft (Diameter)
1.80 ft (Diameter)
Luminous Length (0-180)
Luminous Length (90-270)
Luminous Height
Ballast Factor
CIE Type
Spacing Criterion (0-180)
Spacing Criterion (90-270)
Spacing Criterion (Diagonal)
Basic Luminous Shape
Characteristics With Diffuser Lens
Total Luminaire Watts
Lumens Per Lamp
Total Lamp Lumens Rated Initial
Luminaire Lumens
Total Luminaire Efficiency
Luminaire Efficacy Rating (LER)
2011-279-3 Rev I
IES Files are available upon request, Contact Fulham.
487
973
1460
1946
1
2
Maximum Candela = 1946.151 Located At Horizontal Angle = 0, Vertical Angle = 5# 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)# 2 - Horizontal Cone Through Vertical Angle (5) (Through Max. Cd.)
1
1
1
.5
.5
.5
.25
.25
.25
.25
5
FULHAMHH-ILS-CDS150-5K-W/ DIFFUSER LENS22-3/8"DIA. X 24"H. INDUCTION HI-BAY FIXTURE150W CIRCULAR INDUCTION LAMP, TYPE V CLEAR ACRYLIC PRISMATIC REFRACTORCLEAR PRISMATIC DIFFUSER LENS
Horizontal FootcandlesScale: 1 Inch = 10 Ft.
Light Loss Factor = 0.85Lumens Per Lamp = 12000
Total Lamp Lumens = 12000Mounting Height = 15.00 Ft
Footcandle Template HH-ISK-C150-HB-22 with Diffuser Lens
IES INDOOR REPORT
POLAR GRAPH
HH-ISK-C150-HB-22 WITH DIFFUSER LENS
E333512
SYSTEM MODEL #: DATE / /
PROJECT
TYPE
HIGHBAY INDUCTION CONVERSION SYSTEM KIT - CIRCULAR 200W
Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please reference the Fulham product catalog (www.fulham.com)Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or constructionto the equipment described.
IES INDOOR REPORT - CHARACTERISTICS
IES INDOOR REPORT
HH-ISK-C200-HB-22 WITH DIFFUSER LENS
POLAR GRAPH
1
1
1
.5
.5
.5
.25
.25
.25
.25
.1
.1
.1
.1
.1
FULHAMHH-ILS-CDS200-5K-W/ DIFFUSER LENS22-3/8"DIA. X 24"H. INDUCTION HI-BAY FIXTURE200W CIRCULAR INDUCTION LAMP, TYPE V CLEAR ACRYLIC PRISMATIC REFRACTORCLEAR PRISMATIC DIFFUSER LENS
Horizontal Footcandles
Light Loss Factor = 0.85Lumens Per Lamp = 17000
Total Lamp Lumens = 17000Mounting Height = 15.00 Ft
Maximum Calculated Value = 9.95 Fc
1.38 ft
16,000 - 17,000lm (1 lamp)
16,000 - 17,000lm
13,387lm
79% - 84%
70
192.22
1.00
Semi-Direct
1.20
1.20
1.32
Circular w/ Sides
1.80 ft (Diameter)
1.80 ft (Diameter)
Luminous Length (0-180)
Luminous Length (90-270)
Luminous Height
Ballast Factor
CIE Type
Spacing Criterion (0-180)
Spacing Criterion (90-270)
Spacing Criterion (Diagonal)
Basic Luminous Shape
Characteristics With Diffuser Lens
Total Luminaire Watts
Lumens Per Lamp
Total Lamp Lumens Rated Initial
Luminaire Lumens
Total Luminaire Efficiency
Luminaire Efficacy Rating (LER)
Footcandle Template HH-ISK-C200-HB-22 with Diffuser Lens
2011-279-4 Rev I
663
1325
1988
2650
1
2
Maximum Candela = 2650.03 Located At Horizontal Angle = 0, Vertical Angle = 5# 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)# 2 - Horizontal Cone Through Vertical Angle (5) (Through Max. Cd.)
IES Files are available upon request, Contact Fulham.
E333512