StratcoStainless Steel
SINKS
Heavy Duty Hand Basin 22Inset Bowl 23Multiple Basin Vanity Bench Top 24Restaurant Sink 25Wine Spittoon 25Drip Sink 27Inset Sluice Sink 28Pan Room Sluice / Sink & Drainer - Single Bowl 29Pan Room Sluice / Sink & Drainer - Double Bowl 30Art Sink 1200 Fascia 31Art Sink 1200 Inset 32
21STAINLESS STEEL
22 STAINLESS STEEL
FeaturesDurable heavy duty purpose hand basinsupported by stainless steel brackets
••• Stainless steel brackets
• Radius internal corners• Hob mount tap landing
•
•
•
Custom manufacturedSatin finish
AS 1449
Manufactured from 1.2 mm 304 #4stainless steel sheet complying with
Tap holes to customer specification
PVC plug and washer
FEATURES
STANDARD SPECIFICATION
MODEL NO: HABAHDSS
09/2004
HEAVY DUTY HAND BASIN
DIMENSIONS
DRAWING
CODEA B C D
500 mm 400 mm 100 mm 100 mm
STAINLESS STEEL
BRACKET
A
B
SUPPLIED WITH P.V.C.
PLUG & WASHER
C
D
23STAINLESS STEEL
Features
MODEL NO: INBLIBSS
09/2004
INSET BOWL
The inset bowl is applicable in areas where a single bowl isrequired. Made from 316 #4 or 304 #4 stainless steel it can beused for a variety of environments including schools, laboratories,kitchens & clinics.
• C.S. - Custom Sizes
DIMENSIONS
DRAWING
CODEA B FC GD HE I J K
C.S. 35 mm C.S. C.S. 35 mm 35 mm C.S. C.S. 35 mm 15 mm100 mm
BENCH
TOP
INSET
CLIP DETAIL
INSET
BOWL
INSET
CLIP
J
K
SECTION THRU’
D
CL
FE
SUPPLIED WITH P.V.C.
PLUG & WASHER
STANDARD BOWL
A
C
B
TAP LANDING BOWL
G
HI
TAP HOLES TO
BE NOMINATED
WHEN ORDERING
••• Inset clip
• Poly propylene or PVC plug and washer
• Manufactured from 316 #4 or 304 #4stainless steel
• Radius internal corners
•
Custom manufacturedSatin finish
AS 1449
Manufactured from 1.2 mm 316 #4 or304 #4 stainless steel sheet complyingwith
FEATURES
STANDARD SPECIFICATION
24 STAINLESS STEEL
Custom made multiple basin vanity bench top suitable forindustrial purposes, hospitals, public toilets, hotels & caravanparks. Hygienic, easy cleaning & fabricated to withstandharsh environments.
••• Nosing on front
• Fully backed with HMR board• All welded construction
• Wall brackets available• 140 mm high splash back• Available up to six bowls
•
• Standard lengths include: 1200 mm -double bowl, 1800 mm - triple bowl &2400 mm - four bowl.
•
Custom manufacturedSatin finish
AS 1449
Manufactured from 1.2 mm 304 #4stainless steel sheet complying with
PVC plug and washer
FEATURES
STANDARD SPECIFICATION
DIMENSIONS
DRAWING
CODEA B FC GD HE
15 mmAll Standard
Lengths550 mm 60 mm 50 mm 12 mm 140 mm 15 mm
MODEL NO: MBVASS
09/2004
MULTIPLE BASIN VANITY BENCH TOP
34 mm TAP HOLE
1 OFF PER BASIN
Ø
406 mm
127 mm DEEP
Ø BASIN x
38 mm
WASTE
Ø PLUG &
A
B
SUPPLIED WITH P.V.C.
PLUG & WASHER
33 mm HMR BOARD
HORNEXED TO
BENCH TOP
HF
D
C
ECL
G
WALL
BRACKETS
Features
25STAINLESS STEEL
FeaturesCustom made deep bowl sinks for restaurants, cafes & hotels
••• Fascia front nosing
• Radius internal corners on bowls
• Wall brackets available• 100 mm high splash back
•
•
Custom manufacturedSatin finish
AS 1449
Manufactured from 1.2 mm 304 #4stainless steel sheet complying with
PVC plug and washer
FEATURES
STANDARD SPECIFICATION
MODEL NO: RESKSS
09/2004
RESTAURANT SINK
GALVANISED WALLBRACKETS
A
B
CL CL
D FE
C(B
OW
L)
DIMENSIONS(mm)
DRAWINGCODE
A B F LC GD JHE KI
1370 to1830 600 380 550 10050 240550 23010455 45
G
H
I
JK
LSUPPLIED WITH P.V.C.
PLUG & WASHER
CL
26 STAINLESS STEEL
FeaturesFeaturing a new design for backflow prevention, this product isspecifically designed for the wine industry,wine tasting & Laboratories
DIMENSIONS
DRAWINGCODE
A B C D E
Ø 337 mm Ø 250 mm 50 mm 250 mm 20 mm
••• Flanged top
• 40 mm BSP 316 toe nipple - outlet• 15 mm BSP 316 toe nipple - inlet
• Fabricated from 316 #4 stainless steel
•
Custom manufacturedSatin finish
AS 1449
Manufactured from 1.2 mm 316 #4stainless steel sheet complying with
FEATURES
STANDARD SPECIFICATION
MODEL NO: WISP250SS
09/2004
WINE SPITTOON
A
4 MANN INSET CLIPS15 mm x 18 mm ID
B
INLET
PLAN VIEW
E
DETAIL- A
INSET CLIP ANGLE15 mm x 18 mm ID
WELD &POLISH
20 mm DIA FLUSHINGTUBE 4 DIA HOLESAT 25 mm CENTRES
15 mm BSP TOE NIPPLE5 FALL TO TUBEº
2 SLOTS 25 mm LONG x 4 mm WIDEIN LINE WITH INLET PIPE
TOPFLANGE
15 mm BSPTOE NIPPLE
5 FALL TO TUBE
316S/STEEL
º
2 x 6 mm DIACROSS BARS
40 mm BSP S/STEELTOE NIPPLE
1.2 mm 316 S/STEEL(SATIN FINISH INTERNAL)
DETAIL- A
CROSS SECTION
A
C
B
D
27STAINLESS STEEL
FeaturesSpecifically designed for laboratories & schools
••• Flanged top
• 32 mm dia. 316 stainless steel B.S.P.nipple
• Fabricated from 316 #4 stainless steel
•
Custom manufacturedSatin finish
AS 1449
Manufactured from 1.2 mm 316 #4stainless steel sheet complying with
FEATURES
STANDARD SPECIFICATION
MODEL NO: DRSI100SS
09/2004
DRIP SINK
A
B
SLIGHT BREAKTO FLANGE
FIXING STUDS BELOW(SHOWN DASHED)
C
F
D E
H
G
BENCH TOP
3 OFF 62 mm X 5 mm DIA.FIXING STUDS & WING NUTS
1.2 mm 316 S/STEEL#4 SATIN FINISH
32 mm DIA. 316 S/STEELB.S.P. NIPPLE
DIMENSIONS
DRAWINGCODE
A B FC GD HE
22 mm 100 mm 22 mm 115 mm 20 mm 25 mmØ 144 mm Ø 100 mm
28 STAINLESS STEEL
FeaturesA sanitary sink used in hospitals, aged care facilities &child care centres. Inset sluice sink can be easilyadapted into existing bench work.
••• Flush cone & ring
• HMR board backing
• Inset clip
• 40 mm BSP stainless steel toe nipple inlet
•
Custom manufacturedSatin finish
AS 1449
Manufactured from 1.2 mm 304 #4stainless steel sheet complying with
FEATURES
STANDARD SPECIFICATION
MODEL NO: ISSK900SS
09/2004
INSET SLUICE SINK
DIMENSIONS(mm)
DRAWINGCODE
A B FC GD HE I J K L
900 32 typ. 490 480 Ø 355 50 305 102 30 32 1560
40 NB BSP S/STEELTOE NIPPLE
20 mm FALL
B
A
A A
E
C
D
18 mm HMR BOARDHORNEX ADHERED
INSETCLIP DETAIL
STANDARDFLUSHING
CONE & RING
FG
H
I
SECTION A - A
INSETCLIP DETAIL
INSETSINK
INSETCLIP
BENCHTOP
K
L
J(S
HA
LL
OW
EN
D)
29STAINLESS STEEL
FeaturesA sanitary sink which incorporates a single bowl & flushing cone.Pan room sluice/sink & drainers are custom designed for hospitals,aged care & disabled care facilities.
••• Flush cone & ring
• Radius internal corners on bowls• HMR board backing
• Deep splash front• 304 #4 or 316 #4 stainless steel• Left or right hand flush bowl• Cistern positioned to customerspecification
• Chrome plated brass plug & washer
• 1500 mm standard lengths, other lengthsavailable upon request
• 316#4
Custom manufacturedSatin finish
AS 1449
Manufactured from 1.2 mm 304 #4 orstainless steel sheet complying with
FEATURES
STANDARD SPECIFICATION
MODEL NO: PRSSIBWSS
09/2004
- SINGLE BOWL
PAN ROOM SLUICE/SINK & DRAINER
JK
S/STEEL FLUSHINGCONE
A
C
G
B
D
FH I
E
BOWL - 530 x 380x 240 mm DEEP
FALL
• C.L. - Custom Lengths
DIMENSIONS(mm)
DRAWINGCODE
A B FC GD JHE KI
400660 575 526 305276 60C.L. Ø 355 typ.40 Ø 100
30 STAINLESS STEEL
A sanitary sink which incorporates a double bowl & flushing cone.Pan room sluice/sink & drainers are custom designed for hospitals,aged care & disabled care facilities.
MODEL NO: PRSS2BWSS
09/2004
- DOUBLE BOWL
PAN ROOM SLUICE/SINK & DRAINER
• C.L. - Custom Lengths
DIMENSIONS(mm)
DRAWINGCODE
A B FC GD JHE K L MI
400660 575 445 Ø 100526 Ø 355 typ. 305 60276 95C.L. 40
LM
S/STEEL FLUSHINGCONE
I
A
C DB
E
G
H
J K
F
BOWL - 530 x 380x 240 mm DEEP
BOWL - 330 x 380x 305 mm DEEP
FALL
Features
••• Flush cone & ring
• Radius internal corners on bowls• HMR board backing
• Deep splash front• 304 #4 or 316 #4 stainless steel• Left or right hand flush bowl• Cistern positioned to customerspecification
• Chrome plated brass plug & washer
• 2100 mm standard lengths, other lengthsavailable upon request
• 316#4
Custom manufacturedSatin finish
AS 1449
Manufactured from 1.2 mm 304 #4 orstainless steel sheet complying with
FEATURES
STANDARD SPECIFICATION
31STAINLESS STEEL
FeaturesUtilised in schools, child care centres & kindergartens,featuring radius internal corners for easy cleaning.Detailed ends to suit any design - walls,cupboards, or freestanding.
••• Left of right hand outlet
• Radius internal corners
• Hob mount tap landing
•
• 20 mm tile rebate• Tap holes to customer specification
•
Custom manufacturedSatin finish
AS 1449
Manufactured from 1.2 mm 304 #4stainless steel sheet complying with
PVC plug and washer
FEATURES
STANDARD SPECIFICATION
MODEL NO: ARSKFASS
09/2004
ART SINK 1200 FASCIA
DIMENSIONS
DRAWING
CODEA B C D
1200 mm 600 mm 40 mm 150 mm
A
B
C
D
TYPE “C” FOR
OPEN ENDS
TYPE “B” END
ABUTTS WALLS
TYPE “D” END
ABUTTS C/BOARDS
32 STAINLESS STEEL
FeaturesUtilised in schools, child care centres & kindergartens,featuring radius internal corners for easy cleaning
••• Left of right hand outlet
• Radius internal corners
• Hob mount tap landing
•
• Tap holes to customer specification
•
Custom manufacturedSatin finish
AS 1449
Manufactured from 1.2 mm 304 #4stainless steel sheet complying with
PVC plug and washer
FEATURES
STANDARD SPECIFICATION
MODEL NO: ARSKINSS
09/2004
ART SINK 1200 INSET
DIMENSIONS
DRAWING
CODEA B C
1200 mm 472 mm 150 mm
A
B
C
INSET DETAIL