Download pdf - Stora Enso at Interpack 2011: Primeforma

8/8/2011

Primeforma

Rethink the sustainability of formed tray packagingStora Enso at Interpack 2011

8/8/2011

Mega-trends will affect the future of packaging

Stora Enso at Interpack 2011

8/8/2011

Today 30% of the world’s food goes to waste, part of this due to bad packaging


8/8/2011

• Ecological

• Economical

• Convenient

• Easy to implement

New efficient packaging and raw material needed


8/8/2011

Primeforma – sustainable formed tray

An new fibre based packaging material Stora Enso at Interpack 2011

8/8/2011

Recyclable board trays for sliced meat packaging.

• Developed for thermoformed food packaging.

• The formability of board and the coating methods have developed new opportunities for consumer packaging

• Recyclability depend on local community and legislation


8/8/2011

Primeforma benefit: sustainable

• Stiffness from Fibres– Renewable– Low CO2 Footprint

• High Barr properties from multi-layer-polymer-coating– Minimum oil based raw

material– Less than 13 % polymer


8/8/2011

Primeforma benefit: used on existing packaging lines

• Primeforma can be used on existing packaging lines which were previously used for plastic film

Sealpac, Oldenburg


8/8/2011

Primeforma is developed for form fill & seal technology

8/8/2011

Depth of tray: approx. 12 mm

8/8/201111

• High barrier polymer coating provides excellent light, oxygen, humidity and even grease protection

• High barrier coating can be made with peel ability property

• Information can be printed directly onto the surface of the board

• In paper recycling plastic coatings are separated and recovered either as energy or material and fiber used for new paper and board

• Primeforma Board 278 gsm + EnsoBarr Peel 41 gsm: high share of the material is coming from renewable resource

Primeforma


8/8/2011

Fibre based packaging material is part of a modern and sustainable lifestyle


8/8/2011

Rethink. Get inspired. Primeforma.
