10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 1/27
STEP BY STEP GUIDE TO SETUP ACTIVEDIRECTORY ON WINDOWS SERVER 2012This tutorial will explain how to install AD on server 2012 R2.
Requirement:
Minimum: 1.4 Ghz 64-bit processor
Minimum: 512 MB RAM
Minimum: 32 GB or greater
The first step is to get server 2012 install on a server. it is very similar to server 2008 install andin one of my previous posts i have discribe how to do the install in details.
REBELADMIN
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 2/27
Next thing we need to do is get network interfaces configured. it is obvious to use static ipaddress for the server. Since the server will be act as DNS server, for DNS server field you can uselocal host address 127.0.0.1
It is recommend to use meaning full name as the server name. in demo i renamed it as "DCPR1"
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 3/27
After this we are ready to start on the AD install. As per my next step i will start DNS role installfirst. This is not must to do, you also can install dns during the AD install. But as per best practicei always prefer to add DNS role first.To do this we need to start "Server Manager" it can opne using shortcut on task bar or from Start> Server Manager
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 4/27
Then in Server Manager window click on option "Add roles and features" option.
Then it will load the "Add Role Wizard", Click next to continue
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 5/27
In next window keep "Role-based or feature-based installation" default selection and click onnext.
In next window we can select which server to install role. in our case it will be local. so keep thedefault selection and click on next.
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 6/27
In next window it give option to select the roles. select the "DNS Server" and click on box to tickit.
Then it will prompt window to inform about the related additional features which DNS role need.click on "Add features" to continue.
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 7/27
In next window it gives option to select any additional feature, but in here i will keep it default.click on next to continue
Then it will give brief introduction about the DNS role, click on next button to continue
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 8/27
In next window it will give details about the selected features and click on "Install" to begin theinstallation
Then it will begin the installation and we need to wait till it completes.
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 9/27
Once its completes click on close.
Then you can access DNS server using server manager > tools > DNS
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 10/27
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 11/27
Now we have every thing ready for AD install. so lets load server manager again and click on "Addroles and features"
Then it will load the "Add roles and features" wizard. click on next to continue.
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 12/27
In next window keep "Role-based or feature-based installation" default selection and click onnext.
In next window we can select which server to install role. in our case it will be local. so keep thedefault selection and click on next.
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 13/27
In next window it gives option to select the roles. select and click on tick box "Active DirectoryDomain Services"
Then it will prompt window to indicate the additional feature installations related to selected role.click on "Add Features" to continue.
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 14/27
Then in next window click on next to continue
In next window it will give option to select addtional feature to install. but i will keep the defaultselection. click next to install.
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 15/27
In next window it give brief description about the AD service. click on next to continue.
In next window it gives brief about the installation. click on "install" to start the installation.
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 16/27
In next window it will begins the service install and we have to wait till it finish.
Once it finish click on "close" to exit from the wizard. then next step is to reboot the server tocomplete the installation.
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 17/27
After that completes we need to start on the DC setup. to start that open the "Server Manager"and click Task flag on right hand corner. then it will list option as below picture. click on"promote this server to a domain controller" option ( highlighted with yellow in picture)
Then it starts the DCPROMO wizard. on the first window since its going to be new forest i haveselected option "Add a new forest" and i typed the domain name "contoso.com" which i will beusing on the forest. once fill the info click on "next" to continue.
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 18/27
In next window we can select the forest and domain functional levels. i will keep it default. thenin domain controller capabilities its by default selected DNS server and Global Catalog as its firstDC in the forest. then we need to defined password to use in DC recovery. click on next tocontinue.
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 19/27
In next window it will give following error but it can be ignore. click on next to continue.
In next window it ask for the netbios name. we can keep it default and click on next to continue.
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 20/27
In next window it give option to change file paths for AD database, log files and SYSVOL files. wecan change the paths or keep them defaults. once changes are done click on next to continue.
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 21/27
In next window it gives description about the installation. click on next to continue.
In next window it will run system check and verify system is compatible with the selectedinstallation. once test completes successfully click on install button to begin the installation. if its
passes any critical errors those needs to be address before the installation begin.
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 22/27
then it will start the install and we need to wait till it finishes.
Once its complete the install it will automatically reboot the server.
Once server is rebooted log in to server using domain admin credentials.
In our demo it will be in format of
user : contoso\Administrator
password : XXXXXXXXX
Once login, load the "Server manager" and click on "AD DS" option in right hand list. then selectand right click as showed in screenshot to start with AD configuration.
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 23/27
CREATE USERS WITH USER TEMPLATES IN AD
Now we successfully completed with the DC setup on server 2012 R2. if you have any issue aboutthe steps feel free to contact me on [email protected]
Share and Enjoy:
Posted in Active Directory, MICROSOFT, Windows 2012 and tagged Active Directory 2012, ActiveDirectory Forest, AD feature, DNS server, Globle Catalogue, Role Services, Windows 2012 R2
Server, Windows Server 2012 on July 4, 2014. 4 Comments
HOW TO INSTALL PRINT SERVER ?
4 COMMENTS
nareshMay 7, 2015 at 10:54 am
Thank you was really helpful
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 24/27
LEAVE A REPLY
Your email address will not be published. Required fields are marked *
Name *
Email *
Website
REPLY
SimenJuly 1, 2015 at 1:00 pm
Thanks a lot! Really helpful. When DCPROMO no longer worked I was really sucked, butthis guide helped me out!
REPLY
springcool02August 17, 2015 at 6:42 pm
excellent
REPLY
BjornAugust 24, 2015 at 10:39 pm
Thanks, clear printscreens, every step was detailed and accurate.Keep up the good work!
REPLY
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 25/27
Comment
This visual editor brought to you by fckeditor for wordpress plugin
POST COMMENT
ABOUT MEDishan M. Francis
MVP,MBCS,CCNP,CCNA,ITIL v3Cert,MCITP EnterpriseAdministrator Windows Server2008, MCSA(2008,2012),MCP
I'm a Technology Consultant with10 years experience in theplanning, design, andimplementation of network
technologies. Background includeshands-on experience with multi-platform, LAN/WAN environments.Demonstrated record of success introubleshooting Servers,increasing efficiency, andoptimizing the access andutilization of shared information.Specialist in extending technologyservices from corporateheadquarters to field operations.Professionally certified in a widerange of networking technologies.This blog will use to share theexperience, knowledge gain overthe years and be a help for theothers in the field. This is non-
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 26/27
others in the field. This is non-profit web site and for any inquiryabout post or subject matterplease feel free to contact me [email protected]
CATEGORIES
Active Directory
Azure
CISCO
Cisco CCNA
Cisco CCNP
Hosting
LINUX
MICROSOFT
OTHER
Windows 2012
Windows Server 2008
TAGS
active direcotry Active directory ADAD database AD FS Azure backup cisco cloud DHCP DHCPRole DHCP Scope DirSync DNS DNS server domain DomainController forest FSMO GC GPO group policiesGroup Policy Groups Identity LDAP linux MicrosoftMigration network network management RODC Security SID singlesign on speed SSO trusts vlan VPN VPN Server WAAD windowsWindows 2003 Windows Server 2012RECENT POSTS
Another MVP year!!
10/20/2015 StepbyStepguidetosetupActiveDirectoryonWindowsServer2012RebelAdmin|RebelAdmin
http://www.rebeladmin.com/2014/07/stepbystepguidetosetupactivedirectoryonwindowsserver2012/ 27/27
Why I cant connect PC to the Domain?
Interoperability with older Active directory versions
Group policy Troubleshooting Part 02
Group policy Troubleshooting Part 01
P R O U D L Y P O W E R E D B Y W O R D P R E S S T H E M E : S U I T S B Y T H E M E W E A V E R