Turn
in
g Your Assets into Dollars
Public AuctionSURPLUS
EQUIPMENT
EVERYTHING
MUST SELL!
Asset Sales, Inc.Corporate Headquarters
163 Associates LaneIndian Trail, NC 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com [email protected]
European Headquarters6 Hill End Close, Norwood GreenHalifax, West Yorkshire, HX3 8RH
Tel / Fax [email protected]
PLANT CLOSED - SURPLUS EQUIPMENT
MAXCESS INTERNATIONALLARGE CAPACITY ENGINE LATHES, ROLL GRINDING & BRIDGE CRANES
1102 SHERIDAN STREET - CHICOPEE, MA 01022TUESDAY, FEBRUARY 11TH @ 10:00 A.M. EST
Inspection: Monday, February 10th, From 8:00 A.M. - 4:00 P.M. EST
(2) 20 TON X 52' PRODUCTION EQUIPMENT COMPANY TOP RUNNING DOUBLE GIRDER BRIDGE CRANES
34" X 122" MAZAK POWERMASTER N CNC FLAT BED LATHE
9 AVAIL. 10-20
Ton20
TON
SMTW 25" X 160" CYLINDRICAL ROLL GRINDER54" X 270" POREBA HEAVY DUTY ENGINE LATHE
2001
7AVAIL. 2
AVAIL.
MACHINERY INSPECTION DATE & TIME – MONDAY, FEBRUARY 10TH FROM 8:00 A.M. - 4:00 P.M. EST
2
72" X 250" PRECION HEAVY DUTY ENGINE LATHE
56" X 360" REPUBLIC LAGUN HEAVY DUTY GAP BED ENGINE LATHE
HEAVY DUTY ENGINE LATHES
72” Swing x 250” Centers PRECION Heavy Duty Engine Lathe Model CW61170L with 57” Swing Over Cross Slide, 48” 4-Jaw Chuck, 5” Spindle Bore, Spindle Speeds to 315 RPM, Inch / Metric Threading, 40HP, Tailstock, Steady Rests, sn:20110184, mfg.2011
56” Swing x 360” Centers REPUBLIC LAGUN Heavy Duty Gap Bed Engine Lathe Model Power Five 50 with 36” Swing Over Cross Slide, 68” Swing in Gap, 48” 4-Jaw Chuck, 6” Spindle Bore, Variable Spindle Speeds to 700 RPM, Inch / Metric Threading, Steady Rest, Tailstock, D.R.O., 4-Way Tool Post, sn:09040713, mfg.2009
54” Swing x 270” Centers POREBA Heavy Duty Engine Lathe Model TR135 B3VSX611 with 40” Swing Over Cross Slide, 36” 4-Jaw Chuck, 4.72” Spindle Bore, Variable Spindle Speeds to 500 RPM, Inch / Metric Threading, Remote Operators Controls on Saddle, Digital Readouts, Steady Rest, Tailstock, Coolant, sn:7402-01-19007-01, mfg.2001
42” Swing x 240” Centers TOS Heavy Duty Engine Lathe Model SU100 with 29” Swing Over Cross Slide, 39” 4-Jaw Chuck, 4-1/4” Spindle Bore, Spindle Speeds to 450 RPM, Inch / Metric Threading, Steady Rests, Tailstock, D.R.O., 4-Way Tool Post, Coolant, sn:0443178
36” Swing x 240” Centers POREBA Heavy Duty Engine Lathe Model TPK90A with 25” Swing Over Cross Slide, 24” 4-Jaw Chuck, 3-1/2” Spindle Bore, Spindle Speeds to 710 RPM, Inch / Metric Threading, Steady Rest, Tailstock, D.R.O., 4-Way Tool Post, Taper Attachment, sn:1102-150, mfg.1985
32” Swing x 300” Centers POREBA Heavy Duty Engine Lathe Model TPK-80/3M with Headstock Spindle Center, Inch / Metric Threading, Steady Rest, Tailstock, D.R.O., sn:1175-1.29, mfg.1983 (Illinois)
28” Swing x 264" Centers TOS Heavy Duty Engine Lathe Model SU63 with 14” Swing Over Cross Slide, 24+16” 4- Jaw Chuck, 3-1/4” Spindle Bore, Spindle Speeds to 1120 RPM, Inch / Metric Threading, Steady Rest, Tailstock, D.R.O., 4-Way Tool Post, sn:0454145, mfg.1990
Additional 63” Chuck with (4) 10” Top Jaws, 11” Hole, Plain Back, Steady Rests, Heavy Duty Lathe Centers and Tooling, Huge Assortment over 50 Lots, Etc..
54" X 270" POREBA HEAVY DUTY ENGINE LATHE
2001
2011
2009
AUCTION SALE DATE & TIME – TUESDAY, FEBRUARY 11TH @ 10:00 A.M. EST
3
42” X 240” TOS HEAVY DUTY ENGINE LATHE 36" X 240" POREBA HEAVY DUTY ENGINE LATHE
28" X 264" TOS HEAVY DUTY ENGINE LATHE
46" X 178" POREBA CNC FLAT BED LATHE34" X 122" MAZAK POWERMASTER N CNC FLAT BED LATHE
CNC LATHES46” Swing x 178” Centers POREBA Model TRP110NX4M CNC Flat Bed Lathe with 30” Swing Over Cross Slide, 31” 4-Jaw Chuck, 3.5” Hole, 40 HP, 12 Position Duplimatic Turret on Cross Slide, Milling & C-Axis, Chip Guards, Steady Rests, Chip Conveyor & FANUC OT CNC Pendant Control, sn:7402-19-07012-00, mfg.1998
34” Swing x 122” Centers MAZAK Model Powermaster N CNC Flat Bed Lathe with 24” 3-Jaw Chuck, Spindle Speeds to 1200 RPM, 60HP, 8-Postion Front & 6-Position Rear Turrets on Cross Slide, Chip Guards, Chip Conveyor, Steady Rest, Tail Stock, MAZATROL T32-T CNC Control, sn:2001
NICE
7AVAIL.
3AVAIL.
7AVAIL.
MILLING
MACHINERY INSPECTION DATE & TIME – MONDAY, FEBRUARY 10TH FROM 8:00 A.M. - 4:00 P.M. EST
4
CYLINDRICAL ROLL GRINDERS, CNCCHURCHILL 50” Swing x 400” Cylindrical Roll Grinder with 40HP Spindle Head Motor, 15HP Work Head, 30” Wheel or Belt, (4) Work Rests, Variable Workhead Speeds, Tailstock, Coolant System & Operators Controls, Approx. 15-20,000lb Capacity Between Centers, D.R.O.’s
CHURCHILL 30” Swing x 216” Cylindrical Roll Grinder Model G with Wheel or Belt, Work Rests, Variable Workhead Speeds, Tailstock, Coolant Systems Operators, Pendant Controls, D.R.O.’s, PLC Upgrade Controls & Motors, Coolant, sn:31934
SMTW 25” Swing x 160” Centers Cylindrical Roll Grinder Model H147 630MM X 4000MM with 20HP Spindle Head Motor, Belt or Wheel, (7) Work Rests, Variable Speed Workhead, Tailstock & D.R.O.’s, Coolant, sn:18
SMTW 25” Swing x 125” Centers Cylindrical Roll Grinder Model H163 60MM x 3000MM with 20HP Spindle Head Motor, 30” Diameter Wheel or Belt, (2) Work Rests, Variable Speed Workhead, Tailstock & D.R.O.’s, Coolant, sn:8707
HERKULES 35” Swing x 196” CNC Traveling Wheelhead Cylindrical Roll Grinder Model WS450-8 with 18,000lb Capacity Between Centers, Coolant System, Headstock, Tailstock, FANUC Oi-TD, (Retro.2013), sn:710101/85
SCHAUDT 12" X 40" CNC Cylindrical Grinder with FANUC CNC Control & Remote Pulse Generator (Neenah, WI)
CHURCHILL 50" X 400" CYLINDRICAL ROLL GRINDER
CHURCHILL 30" X 216" CYLINDRICAL ROLL GRINDER
20,000lb CAPACITY
HERKULES 35" X 196" CNC TRAVELING WHEELHEAD CYLINDRICAL ROLL GRINDER
FANUCCONTROL
2AVAIL.
AUCTION SALE DATE & TIME – TUESDAY, FEBRUARY 11TH @ 10:00 A.M. EST
5
SMTW 25" X 160" CYLINDRICAL ROLL GRINDER
SMTW 25" X 125" CYLINDRICAL ROLL GRINDER
16" X 60" LEBLOND REGAL TOOLROOM ENGINE LATHE
14" X 30" YUASA TAKISAWA TOOLROOM ENGINE LATHE
TOOLROOM LATHES & BRIDGEPORT MILL
16” x 60” Centers LEBLOND REGAL Toolroom Engine Lathe with 10” 3-Jaw Chuck, 2-1/2” Bore, Spindle Speeds to 1800 RPM, Inch / Metric Threading, Taper Attachment, Coolant, ALORIS Tool Post, sn:12C370, mfg.1980
14” x 30” Centers YUASA TAKISAWA Toolroom Engine Lathe with 8” 4-Jaw Chuck, Spindle Speeds to 2,000 RPM, Inch / Metric Threading, ALORIS Tool Post, sn:90238H
MAZAK 18" x 60" Engine Lathe (Neenah, WI)
J&L No.7A Universal Turret Lathe with 16” 3-Jaw Chuck, Spindle Speeds to 1000 RPM, 3” Hole, 6-Postion Turret
BRIDGEPORT 2-Axis CNC Vertical Milling Machine with 9” x 48” Table, R-8 Spindle Speeds Variable to 4,200 RPM, 2HP, CNC Control with Digital Readouts, EX Trak Plus, sn:258260
SCHAUDT CNC GRINDER
4AVAIL.
4AVAIL.
CNC
MACHINERY INSPECTION DATE & TIME – MONDAY, FEBRUARY 10TH FROM 8:00 A.M. - 4:00 P.M. EST
6
HORIZONTAL BORING & PLANER MILLS
5” GIDDINGS & LEWIS 350T Table Type Horizontal Boring Mill with 96” x 60” Table, 72” Vertical Travel, 86” Cross, 90” Longitudinal, Saddle Supports, #50 Taper Spindle Speeds to 975 RPM, D.R.O., sn:150-224-57
5” GIDDINGS & LEWIS 350T Table Type Horizontal Boring Mill with 48” x 134” Table, 60” Vertical Travel, 120” Cross, Spindle Speeds to 975 RPM, D.R.O., sn:150-2-54
4” GIDDINGS & LEWIS 340T Table Type Horizontal Boring Mill with 72” x 36” Table, 48” Vertical Travel, 60” Cross, 5 MT Spindle Speeds to 1500 RPM, 2-Axis D.R.O., sn:7056
FLATHERS Planer Mill with 130” x 32” T-Slot Table, LAGUN Variable Speed Milling Head on Rail & Digital Readout (Illinois)MAZAK 18" X 60" ENGINE LATHE BRIDGEPORT 2-AXIS CNC
VERTICAL MILLING MACHINE
(3) GIDDINGS & LEWIS 340T / 350T TABLE TYPE HORIZONTAL BORING MILLS
HYDRAULIC TRAVELING GANTRY ROLL STRAIGHTENING PRESS
TRAVELING ROLL STRAIGHTENING PRESSHydraulic Traveling Gantry Roll Straightening Press with 30” Swing x 36” Height x 32’ Maximum Length Capacity, 200 Ton Capacity, Headstock & Tailstock with Tilt & Rotation
FLATHERS PLANER MILL
3AVAIL.
200TON
MILLING
AUCTION SALE DATE & TIME – TUESDAY, FEBRUARY 11TH @ 10:00 A.M. EST
7
HYD-MECH S20 SERIES II MITRE CUTTING HORIZONTAL BANDSAW
BANDSAWS, STEEL STOCK & MISCELLANEOUS
HYD-MECH S20 Series II Mitre Cutting Horizontal Bandsaw with 13” x 18” Capacity, 2HP, Workhold Vise, Infeed & Discharge Tables, sn:60396231
ROCKWELL 20” Vertical Bandsaw with Variable Blade Speeds to 4500 FPM, Blade Welder / Grinder, Worktable, sn:1728391
KALAMAZOO H9AW Horizontal Bandsaw, sn:13260
(2) STERLING 3/4HP Drill Sharpener, sn:9640599 ● sn:DG8148
Numerous Carbide and Double End Grinders, Sanders & Support Machinery
Assorted Steel Stock & Maintenance Racks with Bar Stock, Angle, Flats, Pipe, Etc…
Maintenance Areas with Electrical, Parts Bins & Racks, Controls, Cold Storage Areas, VIDMAR Tool Cabinets, Boring Bars, Cutting Tools, Fans, Cantilever Racks, Tilt Hoppers, Etc…
WELDING DEPARTMENTSTraveling Seam & Roll Cladding Welder with Adjustable Height, ARONSON Headstock & Tailstock Positioners, Wire & Flux Feeds / Hopper & Controls, (2) Linde DC-600 Welders, Includes LINCOLN NA-3 Auto Welding System
5 Ton RANSOME Model AA1RR Positioner, sn:7117458
KOIKE ARONSON 18” 4500lb Headstock, sn:49721
ARONSON H-54 4500lb 30” x 30” Headstock, sn:62296
36” x 60” x 10” Thick 4-Lodge Granite Surface Plate
Numerous MILLER (Invision 352-MPA) & LINCOLN Welders, Rod Ovens, Welding Tables, (5) Sets Motorized Rubber Tank Turning Rolls, ARONSON, JOE FULLER, Other Flux & Welding Equipment, Etc.
BRIDGE CRANES & RAILS, FREE STANDING, JIBS
(2) 20 Ton x 52’ PRODUCTION EQUIPMENT COMPANY Top Running Double Girder Bridge Cranes with Approx. 220” Under Hooks, Radio Controls, sn:340715-01, mfg.2014
10 Ton x 43’ PRODUCTION EQUIPMENT COMPANY Top Running Double Girder Free Standing Bridge Crane System with Approx. 75’ Runway & Uprights, Approx. 195” Under Hooks, sn:051613, mfg.2015
TRAVELING SEAM & ROLL CLADDING WELDER
ASSORTED WELDING
(2) 20TON
ASSORTED 2 TON - 20 TON TOP RUNNING DOUBLE GIRDER& FREE STANDING BRIDGE CRANES Page 7-8
MITRE
MACHINERY INSPECTION DATE & TIME – MONDAY, FEBRUARY 10TH FROM 8:00 A.M. - 4:00 P.M. EST
8
BRIDGE CRANES & RAILS, FREE STANDING, JIBS (continued)
(2) 10 Ton x 43’ Top Running Single Girder Free Standing Bridge Cranes (May be Sold Separate) with 150’ Runways & Uprights, Approx. 168” Under Hooks, Shaw Box Hoists with Pendant Controls
(2) 10 Ton x 43’ Top Running Single Girder Free Standing Bridge Cranes (May be Sold Separate) with 150’ Runways & Uprights, Approx. 168” Under Hooks, Shaw Box Hoists with Pendant Controls
(2) 2 Ton x Approx. 19’ Span Under Slung Bridge Crane System with Runway & Supports, Approx. 112” Under Hooks, BUDGET 2 Ton Hoists with Pendant Controls
GORBEL Free Standing Bridge Crane System with 23’ Span x 30’ Runway, 500lb Hoist with Approx. 8' Under Hook
Numerous Swing Jib Cranes & Hoists
AIR COMPRESSORSSULLAIR 1809/V/A 25HP Variable Speed Drive Rotary Screw Air Compressor with 125 PSI, 99 CFM, sn:201205240009
ZEKS Model 150HSGA100 Air Dryer, sn:538660
200Gal. Air Storage Tank 125 PSI, 23,095 Hours
SULLIVAN Palatek 40DSW 40HP Rotary Screw Air Compressor, sn:1405020006
SULLIVAN Palatek 25D4 25HP Rotary Screw Air Compressor with 125 PSI
SULLIVAN Palatek Air Dryer, Model SPRF-235A216
SILVAN 500 Gal. Air Storage Tank, sn:565507, mfg.2007
10TON
10TON
2TON
10TON
SULLIVAN PALATEK ROTARY SCREW AIR COMPRESSORS
(3) TCM 7,000LB, TCM 4,800LB & KOMATSU 3,500LB CAPACITY PROPANE FORKLIFTS
Want to Sell Your Shop or Know Someone Who Does?
Call Us Toll Free at (888) 800-4442!We Pay Great Finder’s Fees!
2015
3AVAIL.
AUCTION SALE DATE & TIME – TUESDAY, FEBRUARY 11TH @ 10:00 A.M. EST
9
FORKLIFTSTCM 7,000lb Capacity Propane Forklift Model FSG-36N7 with 4 Cushion Tires, 3-Stage Mast with Side Shift, 48” Forks, 189” Max. Height, sn:10DESSS-B081
TCM 4,800lb Capacity Propane Forklift Model FCG25-3HL with 4 Cushion Tires, 3-Stage Mast with Side Shift, 54” Forks, sn:55FSSSA084
KOMATSU 3,500lb Capacity Propane Forklift Model FG-188T15 with 4 Cushion Tires, 3-Stage Mast with 188” Lift Height, 42” Fork, sn:360825A
YELLOW BELLIED Portable Sump Sucker
MISCELLANEOUS SUPPORT & INSPECTION14” WILTON 1HP Vertical Bandsaw ● Phase II 2 Ton Arbor Press ● CRC Smart Washer Model 28-1, sn:2105827 ● Angle Plates, Vises, Index Heads, 3&4 Jaw Chucks, Turning Rolls & Idlers ● Airflow Units ● 24” TROYKE Model R-25 Rotary Table, sn:2898-22 ● 16” ENCO Rotary Table ● 24 ROTAB Rotary Table with Tailstock, 16” 3-Jaw Chuck, Tilt & Rotate
Huge Assortment of Plant Support Equipment Including Maintenance Departments, Some Bearings and Puller, Mag. Base Drill and Power Tools, Hand Tools, Pallet Jacks, Chains, Slings, Crane Scales, Eye Bolts and Clevis, C-Clamps, Vidmar Style Cabinetry, Cantilever Racks and Shelving, Inspection Including STANDARD, MITUTOYO, STARRETT Snap Micrometers and Gages to Approx. 32”, Calipers, Pin Gages, Depth and Inside Micrometers, Mag Base Indicators, Perishable Tooling including Taps, Reamers, High Speed and Carbide End Mills, Boring Bars, Index Drill Boxes, Spade Drills to 3’ (some new), Banding Cart, Shipping & Receiving, Portable Dump Hoppers, Boring Heads and Tools, Etc..
OFFICESLarge Assortment of Offices Including Nice Conference Room & Chairs, Office Cubicles, File Cabinets & Lateral Files, Lunch Room, Etc…. Download a
lot book at www.asset-sales.com
COMPLETE PLANT CLOSUREOVER 600 LOTS
Turn
ing Y
our Assets into Dollars Asset Sales, Inc.Corporate Headquarters
163 Associates LaneIndian Trail, North Carolina 28079
Toll Free: 888.800.4442 Direct: 704.821.4315Fax: 704.821.4325 – www.asset-sales.com
Asset Sales Inc. • Lance Mannion – Massachusetts License #AU2461
54" X 270" POREBA HEAVY DUTY ENGINE LATHE
PUBLIC AUCTION
PLANT CLOSED - SURPLUS EQUIPMENT
MAXCESS INTERNATIONALLARGE CAPACITY ENGINE LATHES, ROLL GRINDING & BRIDGE CRANES
CHICOPEE, MATUESDAY, FEBRUARY 11TH
@ 10:00 A.M. EST
ASSOCIATION OFMACHINERY AND
EQUIPMENT APPRAISERS
2001
ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE. Subject to amendments and modifications announced by the auctioneer at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions. The auctioneer does not warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein. All articles will be sold to the highest bidder conforming to the bid process in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be removed in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale. All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable
to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All bidders are responsible for all applicable taxes. Rigging/Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured. ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS. A 15% Buyer’s Premium will apply to all onsite purchases and a 18% Buyer’s Premium for online purchases. REGISTRATION & BIDDING ONLINE: If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions. ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.
Asset Sales, Inc. Does Not Pack, Ship, Crate, Transport or Rig Items. Buyers May Pick Up Their Items at the Auction Location or Can Arrange for
a Third Party Logistics Firm to Manage the Removal Process for Them.
7AVAIL.
ATTENDING THE AUCTION IN PERSON?What you need to bring.....
• Your Driver’s License• Business Card
• Tax Exempt Form if Non Taxable• Bank Letter of Guarantee if Paying via Company Check