Download pdf - Soft Rock & Hard Rock, Underground Product Guide...Up to 900 MTPH (special applications 1091 MTPH) UFB-22 Up to 636 MTPH Breaker pick force – 60,000 lbs UFB-33 Up to 1000 MTPH UFB-38

MAY 2019 Form no: ZESB094000

Australia 1300 566 287 | komatsu.com.au Komatsu Mining 1300 367 569 | mining.komatsu

New Zealand 0800 566 2878 | komatsu.co.nz New Caledonia 43 53 06

Soft Rock & Hard Rock, Underground Product Guide

12CM12 MB965 mm conveyor width. Load rate 29 tonnes/minute.Cutting Height range 1800mm to 4600mm

UFB-14Up to 1360 MTPH (special applications 1800 MTPH)Breaker pick force – up to 130,000 lbs

4FCT-B/COperated by a single operator using remote controlFlow rates up to 27 tons/minute for coal and 40 tons/minute for salt, trona, gypsum or potash

Stageloaders and Mobile Tail Pieces Tonnage up to 6,000 TPH, Conveyor length up to 70 m,Total installed power up to 700 kW

7LS1Cutting height 1.5 - 3.0 mMachine Weight 52,000 kg

7LS2A & 2BCutting height 1.6 - 3.5 mMachine Weight 59,000 kg

7LS5Cutting height 2.0 - 5.5 mMachine Weight 85,000 kg

7LS6Cutting height - 3.0 - 5.5mMachine Weight 100,000kg

18HDBucket capacity 9.2m3 (12 yd3)Operating weight 53,300 kg (117,500 lbs.)

22HDBucket capacity 11.2 m3 (14.6 yd3)Operating weight 59,091 kg (130,000 lbs.)

10SC42Advanced ergonomics features Rate load capacity 16 tonnes

UFB-17Up to 900 MTPH (special applications 1091 MTPH)Breaker pick force – up to 130,000 lbs

UFB-22Up to 636 MTPHBreaker pick force – 60,000 lbs

UFB-33Up to 1000 MTPHBreaker pick force – up to 130,000 lbs

UFB-38Up to 600 MTPHBreaker pick force – up to 212,000 lbs

Facebolter 30402.1 to 3.2 m operating height range

MB2036Nominal operating range 2.0 to 3.6 m



Quad Bolters2.4 to 5.0 m operating range

CONTINUOUS MINERS

FLEXIBLE CONVEYOR TRAIN

STAGELOADERS & MOBILE TAIL PIECESLONGWALL SHEARERS ARMOURED FACE CONVEYORS

MOBILE BOLTERS

ENTRY DRIVERS

FEEDER-BREAKERS SHUTTLE CAR

Multibolter 2337

Faceboss 7LS6C

SOFT ROCK HARD ROCK SURFACE MINING CONSTRUCTION & UTILITY, QUARRY

12ED25760 mm (30 in.) conveyor widthTotal machine power @950V, 60 Hz 870 kW

12CM30 MBMax 4 roof and 2 rib bolting rigs. 760 mm conveyor width Load rate 27 tonnes/minute. Cutting Height range 1900mm to 4600mm

10SC32 BCRate load capacity 16 tonnes

10SC32 DFeatures a rated load capacity of 30 tonnes (33 tons)

4FCT

Faceboss

Chute - hood Drive frame WinchDrive modules Boot endRoof Structure Belt Storage Loop take up Belt Winder

LOADERS

LOAD HAUL DUMP TRUCKS SHAFT SINKING EQUIPMENT

HYDRAULIC JUMBO DRILLS

TRUCKS

VR-II

JOY

Vein Runner IIBoom coverage maximum of 5.1 m (height) by 5.77 m (wide)Inner and outer turning radius’ of 3.05 m and 5.08 m respectively

DR-2SBBoom coverage of 8.89 m by 6.36 mInner and outer turning radius’ of 4.09 m and 6.7 m respectively

DR-1SBBoom coverage of 5.74 m by 6.34 m Inner and outer turning radius’ of 3.9 m and 6.4 m respectively

DT-3504Rated load capacity of 31,751 kg (70,000 lbs.)

DT-3004Rated load capacity of 27,215 kg (60,000 lbs.)

16TDRated load capacity of 16,000 kg (35,724 lbs.)

7TDRated load capacity of 6,600 kg (14,520 lbs.)

4LDRated load capacity of 4,000 kg (8,800 lbs.)

LT-1051Rated load capacity of 10,000 kg (22,000 lbs.)



Powered Roof SupportRatings up to 2,000+ tonnesHeights from 0.8 to 7.8 meters

POWERED ROOF SUPPORT

Electro-Hydraulic Roof Bolters (EHB)Automatic drill and bolt cycles. Adaptive drilling functionality. Strata mapping and data capture

AFXHeavy duty roof bolter3 tonne feed force

HFXHigh productivity roof bolting2 tonne feed force

HYDRAULIC ROOF BOLTERS

UNDERGROUND CONVEYOR SYSTEMS & TERMINALS

Jumbo Drill360° rotation at top turret for maximized boom coverage

VSM-144.3 m main cylinder stroke

AFCTonnage up to 6,000TPH, Conveyor Length > 400mTotal installed power up to 3 x 1600kW, OPTIDRIVE VSD

Conveyor starter

600mm to 3200mm wide belts

HAC SYSTEMS

Carry Return Impact Flat Garland

CONVEYOR IDLERS

Steel roller & Aluminium roller

Run Red Poly Roller

600mm to 3200mm wide belts

Drive pulleys (Ceramic & FRAS Rubber lagged)

Non-Drive pulleys (Ceramic & FRAS Rubber lagged)

Impact Roller Rubber disc return

600mm to 3200mm wide belts 600mm to 3200mm wide belts

CONVEYOR IDLERS CONVEYOR PULLEYS

Frame

12CM12965 mm conveyor width. Load rate 29 tonnes/minute. Cutting Height range 1800mm to 4600mm

12CM27965 mm conveyor width. Load rate 29 tonnes/minute.Cutting Height range 1800mm to 5000mm

SIZERS

iXRS/XRS 600Up to 1800 MTPH, 0-800mm feed size150/200 (mm) Standard Product Size

XRS/DRX 800Up to 3000 MTPH, 0-100mm feed size150/200/250 (mm) Standard Product Size

JOY

DRS1000

DRX 1000Up to 5000 MTPH, 0-1200mm feed size200/250/300 (mm) Standard Product Size

MVT-II 600Up to 1000 MTPH @ -50mm, 0-250 (mm) feed size25/38/50 (mm) Standard Product Size

MVT-II 800Up to 0-1800 MTPH @ -50mm, 0-350 (mm) feed size50/100 (mm) Standard Product Size

HAC SystemsHigh angle, high volume productivity600mm to 3200mm wide belts