7/30/2019 Smar Sr301ce
1/34
Remote Seals: T Type Flanged (SR301T),Threaded (SR301R), Pancake (SR301P), Sanitary(SR301S), Flanged with Extension (SR301E)and Pancake with Extension (SR301Q).
Transmitters: Level (LD300L) and Sanitary(LD300S).
Standards:
ANSI Dimensions 1 to 4, pressureclass 150# to 2500#.
DIN Dimensions DN25 to DN100,pressure class PN10 to PN250.
JIS Dimensions 40A to 100A, pressure
class 10K to 40K.
Threaded Dimensions to 1 NPT with2500 psi pressure limit.
Sanitary According to 3A Standard, withthreaded connections standardsSMS, RJT, IDF, DIN and Tri-Clamp.
7/30/2019 Smar Sr301ce
2/342
SR301
The remote seal is composed for:
A connection with diaphragm and a capillary connection with fillingfluid.
Thellinguidisresponsiblefortransmittingthepressuremeasuredintheprocessuidtothetransmitterssensor.
The capillary connection connects the seal diaphragm to thetransmitter.
In the transmitter with remote seal, the remote diaphragm and transmis-sioncapillarysetisconnectedtochamberofthetransmitter.
What is SR301?
The SR301 series is a complete line of Remote Seals, which allow the pressure transmitter to do measurements in situatiowhereadirectcontactofthetransmittersdiaphragmwithprocessuidisnotallowed.
Basic Features
Available Models
TheremotesealsavailableinSR301seriesare:
TType Flanged (SR301T),Threaded (SR301R),Pancake(SR301P)wherethose threemodelswith anoptionaluconnection, Sanitary (SR301S), Flanged with Extension (SR301E) and Pancake with Extension (SR301Q), with severmaterialstoassistmostoftheindustrialprocesses.TheLevel(LD300L)andSanitary(LD300S)modelsarealsoavailab
TheSR301T,SR301EandLD300Lmodelsareavailablewithtwoangetypesforprocessconnection:integralandslip-oange.Totheintegralangemodelthediaphragmisweldeddirectlyontheange.Totheslip-onangemodelthediaphrag
isnotweldedontheange,soitispossibletorotatetheange,becomingeasiertheassemblyintheeld.Usingtheslip-
angemodelitispossibletochoosealessnoblematerialtotheangethantheusedtothediaphragm,asCoatedCarbo
Steel.
TheangedremotesealsareavailableinthestandardsANSI,DINeJIS.Thedimensionsare1to4;DN25toDN1and40Ato100A;andthepressureclassesare150#to2500#;PN10toPN250and10Kto40K,respectively.
ThethreadedsealshaveconnectionsofNPTto11/2NPTwithpressurelimitof2500psito25C.Thesanitarymodelsareaccordingto3Astandard,withthreadedconnectionsstandardSMS,RJT,IDFandDIN,an
Tri-Clamp.
Considerations for Remote Seal Specication
Intheremotesealspecicationthefollowingitemsshouldbeconsidered:
ProcessPressure(minimumandmaximum);
ProcessTemperature(minimumandmaximum);
ProcessFluid;
ConnectiontoProcess;
SealInstallationType;
DistancebetweenPressureTapandtheTransmitter.
Introduction
Seal
Transmitter
TransmitterChamber
Diaphragm
Capillary
Integral Flange Model Slip-on Flange Model
7/30/2019 Smar Sr301ce
3/343
SR30
Application
TheSR301isassembledwithgageanddifferentialpressuretransmitter.Whenusedinfoodapplicationstheconnections
aresanitary.Thelevelmodelsarealsoavailable.
The typical applications of the remote seal with transmitter are:
Fluidofthecorrosiveprocess;
Fluidoftheviscousprocessorwithsuspendedsolids;
Fluidoftheprocesswithpossibilityofsolidifying,crystallizingorfreezes;
Process that demand easiness of cleaning.
Main Functions
The use of the remote seal guarantee a correct measurement and without damages to the process or the measurementequipment (transmitter). Therefore it possesses as main functions:
Topreventtheprocessuidfromenteringthepressuretransmittertherebyprotectingtheinstrumentiftheprocessuidiscorrosiveandwouldotherwiseattackanddestroythetransmitter;
Topreventprocessuidswithveryhightemperaturefromcomingincontactwithanddestroyingorotherwiseaffecting
thepressuresensor; Topreventabrasiveprocessuidsfromscratchingtheisolatingdiaphragm.Thismayhappeniftheprocessuidiscarrying
suspendedsolids;
Topreventtheprocessuidfrombuildinguporsolidifyinginsidethetransmitterandblockingthetransmissionofpressuretothesensor.Thismayhappeniftheprocessuidfreezes,polymerizesoriscarryingsuspendedsolids,isviscousor
crystallizing;
Sanitarysealsareusedtopreventbacteriaetc.tobuildupincavitiesinthetransmitter.Thesesealsaredesignedtobeeasilycleaned.Thesearerequiredinthepharmaceuticalandfood&beverageindustries.
Main Advantages
BetterCost/Benet
Easy Maintenance Easy Installation
HighDurability
Avoid the Common Errors
UsingtheSR301avoidspossibleerrorsas:
Wettedmaterialsnotcompatiblewiththeprocessuid.Considernormaloperationaswellascleaning;
Filluidnotcompatiblewiththeprocessuidmaycausehazardoussituationsincaseofdiaphragmrupturesandtheuidscomeincontactwitheachother;
Vacuumbelow600mmHgrequiresspecialconsiderations.Operationat thesehighvacuumsispossibleif doneright.ConsultSmarforadvice;
Processdatasuchaspressure,temperature,requiredsealtypeandprocessuidmust befurnishedtoevaluatetheapplication;
Onlyonesealorcapillarieswithdifferentlengthsonadifferentialpressuretransmittercauseszeroshiftasthetemperaturechanges;
Longcapillariescauseresponsetimetoincreaseandaugmenttemperatureeffect;
Thetemperatureisbeyondtheupperorloweroperatingtemperaturerangeofthelluid;
Theprocesspressureexceedsthesealpressureratingatmaximumprocesstemperature;
Uppermeasurement ranges below600mmH2O will see errors astheremote sealreducesthe sensitivityof thetransmitter.
Introduction
7/30/2019 Smar Sr301ce
4/344
SR301
TPE Software
TheSmaroffersequipmentperformancereportgeneratedbytheTPEsoftware(TotalProbableError),whichaccomplish
aprobabletotalestimateforthetransmittererrorwiththeconnectionstotheprocesssealed.
Vacuum Considerations
Thelluidvaporpressurepointisdependentontemperature.Atacombinationofhightemperatureandpressurene
vacuumthelluidmayvaporizeandthepressuremeasurementbecomesinaccurate.Thesealmayalsobecomepermanentl
destroyed.Carefulselectionoflluidisthereforeofupmostimportance.
TheSR301seriesoffersfeaturesofthelluids.Thisdataisgivenintable7.
Fill Fluid Considerations
Beforealluidischosen,itmustbedeterminedthatitissuitableforoperationattheextremesofvacuumandtemperatur
atwhichitwilloperate.Anotherimportantconsiderationisthatthediaphragmmaybedamaged.
Itisthereforeimportantthatthelluiddoesnotstartahazardouschemicalreactionwiththeprocessuid.
Asaruleofthumb,donotusehydrocarbonbasedlluids,suchassilicone,withstrongoxidizerslike:chlorine,hydroge
hydrazine,oxygen,peroxideornitricacid.AlsodonotuseFluorolubeoilifthereisachanceforittocomeincontactwitaluminum or magnesium.
Theusermustinsurethattherighttypeofsealwiththeproperlluidandwettedmaterialsisused,andif
aremotesealshouldbeusedatall.SeeintheSR301manualthesoftwarededicatedtothecalculationo
thepressuretransmitterswiththepossibleprocessconnectionsassemblyerror(TPE),andthecalculations
fortemperatureerrorsandresponsetime.OrrequestanequipmentperformancereportthroughTPEtothe
ApplicationsEngineeringdepartmentandCommercialAreasofSmar.
Thepressuretransmitteraccuracyisnotsignicantlyalteredbytheadditionofseals/level.However,theerrorofresulti
measurementof thecombination sufferssignicantincreasedue togeometricand physicalparameters,becauseof t
temperature variation.
Introduction
7/30/2019 Smar Sr301ce
5/345
SR30
Copper316LStainless
8E9BA
6000mm7000mm8000 mm9000 mm10000 mm
CODE Capillary Length
MODEL REMOTE SEAL
CODE Process Connection, Range and Standard
123451234
512345123123BD
111112222
23333344455566
SR301T T TYPE FLANGED REMOTE SEAL
123456
7
500mm1000 mm1500mm2000mm3000 mm4000mm
5000mm
CODE Diaphragm Material
IHMT
316LStainlessSteelHastelloyC276Monel400Tantalum
CODE Fill Fluid
SDFTNGBKH
DC200siliconeoilDC704siliconeoilFluorolubeMO-10(1)Syltherm 800NeobeeM20Glicerin+Water(7)Fomblim06/06Krytox1506Halocarbon4.2
CODE Lower Housing
0
12345M
WithoutLowerHousing(2)
316StainlessSteelHastelloyC276SuperDuplex(UNS32750)(7)Duplex(UNS31803)(7)304LStainlessSteel(7)Monel
CODE Gasket Material
CI
0TG
WithoutGasketTeon(PTFE)Grafoil(FlexibleGrafoil)
COD. Optional Items*
ZZ SpecialOptionsSpecify
T Type Flanged Remote Seal - SR301T
TheSR301Tisaangedsealwithweldeddiaphragm.Itcanbesuppliedwithanoptionalushconnectionandhousing.
Theushconnectionremovesdepositsofthediaphragmwithoutdisconnectingtheseal.Ifinstalledcorrectly,theseal
ange does notget wet incontact with theprocess uid duringnormal
operation. However, the diaphragm and housing are wetted.
Bolts and nuts are not supplied with the seal.
ForDimensionsseethepages18,19(forintegralange)and20(forslip-on
ange).ForPressureLimitsseetheTables1,2and3inthepage16.
1150#ANSIB-16.5(11)1300#ANSIB-16.5(11)1600#ANSIB-16.5(11)11500#ANSIB-16.5(4) (11)12500#ANSIB-16.5(11)11/2150#ANSIB-16.5(11)11/2300#ANSIB-16.5(11)11/2600#ANSIB-16.5(11)11/21500#ANSIB-16.5(4) (11)
11/22500#ANSIB-16.5(11)2150#ANSIB-16.52300#ANSIB-16.52600#ANSIB-16.521500#ANSIB-16.5(4) (11)22500#ANSIB-16.5(11)3150#ANSIB-16.53300#ANSIB-16.53600#ANSIB-16.54150#ANSIB-16.54300#ANSIB-16.54600#ANSIB-16.5DN25PN10/40DINEN1092-1(11)DN25PN63/100DINEN1092-1(11)
DN25PN160DIN2501(11)DN25PN250DIN2501(11)DN40PN10/40DINEN1092-1(11)DN40PN63/100DINEN1092-1(11)DN40PN160DIN2501(11)DN40PN250DIN2501(11)DN50PN10/40DINEN1092-1(3) (11)DN50PN63DINEN1092-1(11)DN50PN100DINEN1092-1(11)
DN50PN160DIN2501(11)DN50PN250DIN2501(11)DN80PN10/40DINEN1092-1(3) (11)DN80PN63DINEN1092-1(11)DN80PN100DINEN1092-1(11)DN80PN160DIN2501(11)DN100PN10/16DINEN1092-1(11)DN100PN25/40DINEN1092-1(11)JIS40A20K(11)JIS50A10K(11)JIS50A40K(11)JIS80A10K(11)JIS80A20K(11)JIS100A10K(11)
89BD89B67
89B678ACGFHFGF
667777888
889999AACDDEEF
*Leaveitblankiftherearenotoptionalitems.
SR301T 4 2 3 H S 1 T *
Type of Seal and Ordering Code
GLC
316LStainlessSteelGoldPlated316LStainlessSteelwithHalarLining(10)HastelloywithTeonLining
UABD
Titanium316LStainlessSteelwithTeonLiningTantalumwithTeonLining304LStainlessSteel
7/30/2019 Smar Sr301ce
6/346
SR301
Shield Material
A0-304StainlessSteelA1-316StainlessSteelA2-304StainlessSteelWithPVCLiningA3-316StainlessSteelWithPVCLining
Note - SR301T:
(1)FluorolubeFillingFluidisnotavailablewithMonelDiaphragm.
(2)SuppliedWithoutGasket.
(3)TheSmarStandardizedPN10/40(WithDimensionPN40),however,theDINStandardDividesItinPN10/16andPN25/40.
(4)Alsotsthe#900class.(5)OnlythegasketcodeavailableI(Stainless316).(6)TheInsulatorKitisapplicablewithRaisedFace(H0)andFlatFace(H1),withGasketT
(Teon)materialandlimitedonlyforthemodelsANSIuntil#600,DINuntilP40andJISuntil
40K;formodelswithextensionthegasketT(Teon)havespecialformat.
(7)Itembyinquiry.(8)Finishingoftheangefacessealingregions.a-Standard:ANSIB16.5/MSS-SP6:
RaisedorFlatFacewithgroovedlining:3.2to6.3mRa(125to250AA);
FaceSmallorLargeTongueandSmallorLargeGroovewithsmoothnishingnotexceeding:
3.2mRt(125AA);
b-StandardRTJANSIB16.20/MSS-SP6:
Smoothnishingnotexceeding:1,6mRt(63AA);
c-StandardDINEN-1092-1:
GroovedFinishingB1(PN10toPN40):3.2to12.5mRa(125to500AA);
SmoothFinishingB2(PN63toPN100),C(Tongue)andD(Groove):0.8to3.2mRa(32to125AA).
d-StandardDin2501(DIN2526):
SmoothFinishingE(PN160toPN250):Rz=16(3.2mRa(125AA)).
e-StandardJisB2201:
GrooveFinishing:3.2to6.3mRa(125to250AA).
Whereby:Ra(averageruggedness)andRt(totalruggedness).
(9)Degreasecleaningnotavailableforcarbonsteelanges.(10)Applicableonlyfor:-DiaphragmThicknessof0.05mm.
-Diameters/CapillaryLength:
2ANSIB16.5,DN50DIN,JIS50A,forsealsupto3metersofcapillaryandlevel
models(byinquiry).
3ANSIB16.5,DN80DIN,JIS80A,forsealsupto5metersofcapillaryandlevelmodels.
4ANSIB16.5,DN100DIN,JIS100A,forsealsupto8metersofcapillaryandlevel models.
- Faces: RF and FF.- Temperature Limits:
+10to100C;
+101to150C(byinquiry).
-Notapplicablefordiaphragmthickness:N1-0.10mm.
-Notapplicableforusewithhousing.
(11)NotavailableforSlip-onange.(12)DiaphragmsofTitaniumandMonelavailableonlyin0.1mm,anddiaphragmsofTantaluonlyin0.075mm.
Material / Flange Type
F0-316LStainlessSteel(IntegralFlange)F1-C276Hastelloy(IntegralFlange)F2-304LStainlessSteel(IntegralFlange)(7)F3-SuperDuplex(UNS32750)(IntegralFlange)(7)F4-Duplex(UNS31803)(IntegralFlange) (7)
Lower HousingConnection
G0-WithFlushConnectionof1/4NPT(Ifsuppliedwithhousing)G1-WithTwoFlushConnectionsof1/4NPTat180
G2-WithTwoFlushConnectionsof1/4NPTat90
Face (8)
H0-RaisedFace(ANSI,DIN,JIS)H1-FlatFace(ANSI,DIN)H2-FlatFaceWithSealingChannelRTJ(ANSIB16.20)(5)H3-TongueTypeFace(DIN)(7)H4-GrooveTypeFace(DIN)(7)H5-SmallTongue(ANSI)(7)H6-SmallGroove(ANSI)(7)H7-LargeTongue(ANSI)(7)H8-LargeGroove(ANSI)(7)
Insulator Kit (6)K0-WithoutKitK1-WithKit
Special ProcedureP1-DegreaseCleaning(OxygenorChlorineService)(9)P5-MountingaccordingNACEstandard
Diaphragm ThicknessN0Default(12)N10.1mm(7)
Optional Items
F5-CoatedCarbonSteel(Slip-onFlange)F6-304StainlessSteel(Slip-onFlange)F7-316StainlessSteel(Slip-onFlange)
G3-WithTwoConnectionsof1/2NPT-14NPTat180(WithLid)G4-WithoutFlushConnection
7/30/2019 Smar Sr301ce
7/347
SR30
AB
10000 mm9000 mm
BG
TantalumwithTeonLining316LGoldPlatedStainlessSteel
E9
7000mm8000 mm
78
5000mm6000mm
2 100 mm (4)
BKH
Fomblim06/06Krytox1506Halocarbom4.2
BBCAC
789AA
DC200siliconeoilDC704siliconeoilFluorolubeMO-10(1)
TNG
Syltherm 800NeobeeM20Glicerin+Water(5)
MT
Monel400Tantalum
500mm1000 mm
34
1500mm2000mm
123123
444555
CODE Capillary Length
MODEL REMOTE SEAL
CODE Process Connection, Range and Standard (3)
1.1/2150#ANSIB-16.5(9)1.1/2300#ANSIB-16.5(9)1.1/2600#ANSIB-16.5(9)2150#ANSIB-16.52300#ANSIB-16.52600#ANSIB-16.5
123123
222333
SR301E FLANGED REMOTE SEAL WITH EXTENSION
12
CODE Diaphragm Material
IH
316LStainlessSteelHastelloyC276
CODE Filling Fluid
SDF
CODE Extension Length (2)
1 50mm(2)
CODE Optional Items*
ZZ SpecialOptionsSpecify
3150#ANSIB-16.53300#ANSIB-16.53600#ANSIB-16.54150#ANSIB-16.54300#ANSIB-16.54600#ANSIB-16.5
(1)FluorolubeFillingFluidIsNotAvailableWithMonelDiaphragm.(2)TheSmarStandardizedPN10/40(WithDimensionPN40),however,theDINStandardDividesItin
PN10/16andPN25/40.(3)FlangesANSI#(1500and2500),DINPN(63,100,160and250)andJIS.Supplybyinquiry.(4)TheInsulatorKitisapplicablewithRaisedFace(H0)andFlatFace(H1),withGasketT(Teon)
materialandlimitedonlyforthemodelsANSIuntil#600,DINuntilP40andJISuntil40K;formodelswithextensionthegasketT(Teon)havespecialformat.
(5)Itembyinquiry.(6)Finishingoftheangefacessealingregions:
a-Standard:ANSIB16.5/MSS-SP6:RaisedorFlatFacewithgroovedlining:3.2to6.3mRa(125to250AA);FaceSmallorLargeTongueandSmallorLargeGroovewithsmoothnishingnotexceeding:3.2mRt(125AA);b-StandardRTJANSIB16.20/MSS-SP6:Smoothnishingnotexceeding:1,6mRt(63AA);c-StandardDINEN-1092-1:GroovedFinishingB1(PN10toPN40):3.2to12.5mRa(125to500AA);SmoothFinishingB2(PN63toPN100),C(Tongue)andD(Groove):0.8to3.2mRa(32to125AA).d-StandardDin2501(DIN2526):
Note - SR301E:
SmoothFinishingE(PN160toPN250):Rz=16(3.2mRa(125AA)).e-StandardJisB2201:GrooveFinishing:3.2to6.3mRa(125to250AA).Whereby:Ra(averageruggedness)andRt(totalruggedness).
(7)Degreasecleaningnotavailableforcarbonsteelanges.(8)Applicableonlyfor:-DiaphragmThicknessof0.05mm.-Diameters/CapillaryLength:2ANSIB16.5,DN50DIN,JIS50A,forsealsupto3metersof
capillaryandlevelmodels(byinquiry).3ANSIB16.5,DN80DIN,JIS80A,forsealsupto5metersofcapillaryandlevelmodels.4ANSIB16.5,DN100DIN,JIS100A,forsealsupto8metersofcapillaryandlevelmodels.
- Faces: RF and FF.- Temperature Limits:
+10to100C;+101to150C(byinquiry).-Notapplicablefordiaphragmthickness:N1-0.10mm.(9) NotavailableforSlip-onange.(10)DiaphragmsofTitaniumandMonelavailableonlyin0.1mm,anddiaphragmsofTantalumonly
in0.075mm.
Shield Material
A0-304StainlessSteel
A1-316StainlessSteel
Material / Flange Type
F0-316LStainlessSteel(IntegralFlange)F1-C276Hastelloy(IntegralFlange)F2-304LStainlessSteel(IntegralFlange)(5)
Face (6)
H0-RaisedFace(ANSI,DIN,JIS)H1-FlatFace(ANSI,DIN)H2-FlatFaceWithSealingChannelRTJ(ANSIB16.20)H3-TongueTypeFace(DIN)(5)H4-GrooveTypeFace(DIN)(5)
Extension MaterialJ0-316StainlessSteelJ1-C276HastelloyJ2-304lStainlessSteel(5)
Insulator Kit (4) K0-WithoutKitK1-WithKit
DN40PN10/40DINEN1092-1(9)DN50PN10/40DINEN1092-1(2) (9)DN80PN10/40DINEN1092-1(2) (9)DN100PN10/16DINEN1092-1(9)DN100PN25/40DINEN1092-1(9)
56
3000 mm4000mm
Optional Items*Leaveitblankwhentherearenotoptionalitems.
SR301E 4 2 3 H S 1 *
UA
Titanium316LStainlessSteelwithTeonLining
Special ProcedureP1-DegreaseCleaning(OxygenorChlorineService)(7)P5-MountingaccordingNACEstandard
Diaphragm ThicknessN0Default(10)N10.1mm(5)
Type of Seal and Ordering Code
A2-304StainlessSteelWithPVCLining
A3-316StainlessSteelWithPVCLining
F3-SuperDuplex(UNS32750)(IntegralFlange)(5)F4-Duplex(UNS31803)(IntegralFlange)(5)F5-CoatedCarbonSteel(Slip-onFlange)
H5-SmallTongue(ANSI)(5)H6-SmallGroove(ANSI)(5)H7-LargeTongue(ANSI)(5)H8-LargeGroove(ANSI)(5)
J3-SuperDuplex(UNS32750) (5)J4-Duplex(UNS31803) (5)
Flanged Remote Seal with Extension - SR301E
TheSR301Eisaangedsealwithweldeddiaphragm.Thediaphragmisextendedfromtheseal
angeandweldedtotheextension.DifferentlyfromModelSR301T,itisnotsuppliedwithhousing,
becausethediaphragmcoincideswiththeinternalwallofthetank.
Bolts and nuts are not supplied with the seal.ForDimensionsseethepages18,19(forintegralange)and20(forslip-onange).ForPressure
LimitsseetheTables1and2inthepage16.
LC
316LStainlessSteelwithHalarLining(8)HastelloywithTeonLining
F6-304StainlessSteel(Slip-onFlange)F7-316StainlessSteel(Slip-onFlange)
3 150mm(6) 4 200mm(8)
7/30/2019 Smar Sr301ce
8/348
SR301
BGC
TantalumwithTeonLining316LGoldPlatedStainlessSteelHastelloywithTeonLining
500mm1000 mm1500mm2000mm
Threaded Remote Seal - SR301R
The SR301R isa threaded connection seal.The diaphragmis weldedto theange.This
modelisalwayssuppliedwithhousing,becausetheprocessthreadislocatedinthispart.The
(optional)ushconnectioninthehousingenablestoremovedepositsonthediaphragmwithout
disconnectingtheseal.Thepartsareboltedtogetherandsealedwithagasket.
ThismodelissuppliedwithboltsandnutsinStainlessSteel316.
ForDimensionsseethepage21.ForPressureLimitsseetheTable4inthepage16.
CODE Pressure Limit (3)
MODEL REMOTE SEAL
CODE Process Connection
1/4NPT3/8NPT
12
SR301R THREADED REMOTE SEAL
1 2500psi
CODE Diaphragm Material
IHM
316LStainlessSteelHastelloyC276Monel400
CODE Filling Fluid
SDF
DC200siliconeoilDC704siliconeoilFluorolubeMO-10 (1)
CODE Lower Housing
IHS
316LStainlessSteelHastelloyC276SuperDuplex(UNS32750)(5)
CODE Optional Items*
ZZ SpecialOptionsSpecify
CODE Capillary Length
1234
CODE Gasket Material (4)
TG
Teon(PTFE)Grafoil(FlexibleGrafoil)
CODE Flush Connection
01
WithoutFlushConnectionWithFlushConnection(2)
3000 mm4000mm5000mm6000mm
Note - SR301R:
(1)FluorolubeFillingFluidIsNotAvailableWithMonelDiaphragm.(2)Flushconnectionnotavailableforprocessconnection1NPT.(3)SeeTable4ForPressureLimitsandTemperature(4)SeeTable7GasketApplicationGuideforPressureandTemperatureLimits.
Flange Material
F0-316StainlessSteel
F1-C276HastelloyF2-304LStainlessSteelF3-SuperDuplex(UNS32750)(5)F4-Duplex(UNS31803)(5)
Lower HousingConnection
G0-WithFlushConnectionof1/4NPT(Ifsuppliedwithhousing)G1-WithTwoFlushConnectionsof1/4NPTat180G2-WithTwoFlushConnectionsof1/4NPTat90
Shield Material
A0-304StainlessSteelA1-316StainlessSteelA2-304StainlessSteelWithPVCLiningA3-316StainlessSteelWithPVCLining
NPT3/4NPT
34
1NPT1NPT
56
TUA
TantalumTitanium316LStainlessSteelwithTeonLining
Syltherm 800NeobeeM20Glicerin+Water
DAM
Duplex(UNS31803)(5)304LStainlessSteel(5)Monel
E9AB
7000mm8000 mm
10000 mm9000 mm
5678
BKH
(5)Fomblim06/06Krytox1506Halocarbom4.2
TNG
(5)Itembyinquiry.(6)Degreasecleaningnotavailableforcarbonsteelanges.(7)DiaphragmsofTitaniumandMonelavailableonlyin0.1mm,anddiaphragmsofTantalumonly
in0.075mm.
Optional Items
*Leaveitblankwhentherearenotoptionalitems.
SR301R 4 1 3 H A *I T 0
Special Procedure P1-DegreaseCleaning(OxygenorChlorineService)(6)
Diaphragm ThicknessN0Default(7)N10.1mm(5)
Type of Seal and Ordering Code
G3-WithTwoConnectionsof1/2NPT-14NPTat180(WithLid)G4-WithoutFlushConnection
1/2"BSP1"BSP
78
7/30/2019 Smar Sr301ce
9/349
SR30
WithoutO-ringTeon
BV
BunaNViton (Approved 3A) (4)
CODE Wet O-ring
0T
CODE Tank Adapter
03
WithoutTankAdapterWithTankAdapterin316LSST(3)
CODE Optional Items*
ZZ SpecialOptionsSpecify
CODE Tri Clamp
02
WithoutTri-ClampWithTri-Clampin304SST
Syltherm 800NeobeeM20(Approved3A) (4)Glycerin+Water(6)
BKH
Fomblim06/06Krytox1506Halocarbom4.2
3000 mm4000mm5000mm6000mm
E9AB
Sanitary Remote Seal - SR301S
The SR301S is a seal for food and other applications where the sanitaryconnections are necessary. The diaphragm is welded to the connectionface,whichcanbeThreadedtypeorTri-Clamp,allowinganeasyandfast
connection/disconnectionoftheprocessequipment.
ForDimensionsseethepages28,29and30.ForPressureLimitsseethe
Tables5and6inthepage16.
CODE Capillary Length
ThreadedDN50DIN11851withextension(2)ThreadedDN80DIN11851withoutextension(2)ThreadedDN80DIN11851withextension(2)ThreadedSMS1.1/2-withoutextension (2)ThreadedSMS2-withoutextension(2)ThreadedSMS2-withextension (2)ThreadedSMS-3"-withoutextension(2)ThreadedSMS3-withextension (2)ThreadedRJT2-withoutextension(2)ThreadedRJT2-withextension(2)ThreadedRJT-3"-withoutextension(2)ThreadedRJT3-withextension (2)ThreadedIDF2-withoutextension (2)ThreadedIDF2-withextension(2)
ThreadedIDF-3"-withoutextension(2)ThreadedIDF3-withextension (2)
11111111111111
11
VWXSE71MC52LB4
3K
MODEL REMOTE SEAL
CODE Process Connection (1)
Tri-ClampDN50withoutextensionTri-ClampDN50withextensionTri-ClampDN50HPwithextensionTri-Clamp1.1/2-withoutextensionTri-Clamp1.1/2HP-withoutextension(5)Tri-Clamp2-withoutextensionTri-Clamp2HP-withoutextension(5)Tri-Clamp2-withextensionTri-Clamp2HP-withextension (5)Tri-Clamp3-withoutextensionTri-Clamp3HP-withoutextension(5)Tri-Clamp3-withextensionTri-Clamp3HP-withextension(5)ThreadedDN25DIN11851withextension(2)
ThreadedDN40IN11851withoutextensionThreadedDN40DIN11851withextension (2)ThreadedDN50DIN11851withoutextension(2)
1
1
2
1
2
1
2
1
2
1
2
1
2
1
11
1
TAAFFDD66GGII8
H9U
SR301S SANITARY REMOTE SEAL S
1234
5678
500mm1000 mm1500mm2000mm
CODE Diaphragm Material
HI
HastelloyC276316LSST
CODE Fill Fluid
SDF
DC200siliconeoilDC704siliconeoilFluorolubeMO-10
Shield Material
A0304StainlessSteelA1316StainlessSteelA2-304StainlessSteelwithPVCLiningA3-316StainlessSteelwithPVCLining
(1)ExtensionMaterialin316StainlessSteelandwetpartwith diaphragm material..
(2)NotavailableforTri-clampin304stainlesssteel.(3)NotavailableforwithoutO-Ringoption.
Note - SR301S:
TNG
7000mm8000 mm
10000 mm9000 mm
Optional Items
*Leaveitblankwhentherearenotoptionalitems.
SR301S 4 1 3 I A *T 1 0
P1DegreaseCleaning(OxygenorChlorineService)(7)P3Polishingofthewetpartsaccordingto3ACertication(4) (6)
N0DefaultN10.1mm(6)
Special Procedures
Diaphragm Thickness
(4) Meets3A-7403Standard.- NeobeeM2OFillingFluid
- WetFacelining:0.8mRa(32AA)
- WetO-Ring:Viton
(5)HPHighPressure.(6)Itembyinquiry.(7)DegreasecleaningisnotavailableforCarbonSteelFlanges.
Type of Seal and Ordering Code
7/30/2019 Smar Sr301ce
10/3410
SR301
TheSR301Pisasealwithweldeddiaphragm,whoseassemblyrequestsblindanges.Thismodelissuppliedwithhousingaushconnection(optional).Theushconnectionremovesdepositsonthediaphragmwithoutdisconnectingtheseal.Thesediaphragmandthehousingarewetted(incontactwiththeprocessuid).However,theblindangedoesnotgetwet.
Bolts,nutsandblindangearenotsuppliedwiththeseal.
Thepressurelimitsareestablishedbypressureclassoftheblindange.
ForDimensionsseethepage22.ForPressureLimitsseetheTables1,2and3inthepage16.
ANSIB-16.5ANSIB-16.5ANSIB-16.5ANSIB-16.5DINEN1092-1(1)DINEN1092-1(1)DINEN1092-1 (1)DINEN1092-1(1)JISB2201JISB2201JISB2201JISB2201JISB2201JISB2201
11/223
4DN40DN50DN80
DN10040A50A50A80A80A
100A
123456789ABCDE
150...2500#150...2500#150...2500#150...2500#
PN10...100PN10...100PN10...100PN10...100
20K10K40K10K20K10K
Pancake Remote Seal - SR301P
MODELSR301P
PANCAKE REMOTE SEAL
CODE Process Connection, Pressure Class / Standard
Type of Seal and Ordering Code
45
Duplex(UNS31803)(4)304LStainlessSteel(4)
UAB
CODE Capillary Length
CODE Diaphragm Material
CODE Lower Housing
78
9BA
500mm1000 mm
1500mm2000mm3000 mm4000mm
12
3456
5000mm6000mm
8000 mm9000 mm10000 mm
316LStainlessSteelHastelloyC276Monel400Tantalum
IHMT
Titanium316LStainlessSteelwithTeonLiningTantalumwithTeonLining
GBKH
CODE Fill Fluid
DC200siliconeoilDC704siliconeoilFluorolubeMO-10(2)Syltherm 800NeobeeM20
SDFTN
Glycerin+WaterFomblim06/06Krytox1506Halocarbon4.2
23
WithoutLowerHousing(3)316StainlessSteel
01
HastelloyC276SuperDuplex(UNS32750)(4)
CODE Gasket Material
TWithoutGasket0 Teon(PTFE)
CODE Optional Items*
SpecialOptionsSpecifyZZ
GLC
316LStainlessSteelGoldPlated316LStainlessSteelwithHalarLining(7)HastelloywithTeonLining
SR301P
*Leaveitblankwhentherearenotoptionalitems.
*I S 1 02 3
Flange Material
A0-304StainlessSteelA1-316StainlessSteel
Lower Housing Connection
F0-316LStainlessSteelF1-C276Hastelloy
Shield Material
G0-WithFlushConnectionofNPT(IfSuppliedwithHousing)G1-WithTwoFlushConnectionsofNPTat180
H0-Face(ANSI,DIN,JIS)(5)
Optional Items
Face (6)
Insulator Kit K0 - Wit hout Kit K1-WithKit
A2-304StainlessSteelwithPVCLiningA3-316StainlessSteelwithPVCLining
F2-304LStainlessSteel(4)F3-SuperDuplex(UNS32750)(4)
F4-Duplex(UNS31803)(4)
Special Procedure P1-DegreaseCleaning(OxygenorChlorineService)
Diaphragm Thickness N0Default(8) N1-0.1mm
G2-WithTwoFlushConnectionsofNPTat90G3-WithTwoConnectionsof14NPTat180(WithLid)
Note SR301P:
(1)MeetsDIN2501PN10...PN250Standard,howeverwithgroovedliningandifmountedwithcounter-angebysolicitedpressureclass.
(2) FluorolubellinguidisnotavailablewithMoneldiaphragm.(3) Supplied without gasket.(4)Itembyinquiry.(5)Thisfacedoesnotcauseinterferencewhenmountedwithcounter-angeswithFlatFace(FF)or
Raised Face (RF).(6)Finishingoftheangefacessealingregions.a-StandardANSIB16.5/MSS-SP6:
Facewithgroovedlining:3.2to6.3mRa(125to250AA);
b-StandardDINEN-1092-1:
GroovedFinishing(PN10toPN100):3.2to12.5mRa(125to500AA);
c-StandardJISB2201:
GrooveFinishing:3.2to6.3mRa(125to250AA).
Whereby:Ra(averageruggedness)andRt(totalruggedness).
(7)Applicableonlyfor:-DiaphragmThicknessof0.05mm.
-Diameters/CapillaryLength:
2ANSIB16.5,DN50DIN,JIS50A,forsealsupto3metersofcapillaryandlevelmode
(byinquiry).
3ANSIB16.5,DN80DIN,JIS80A,forsealsupto5metersofcapillaryandlevelmode
4ANSIB16.5,DN100DIN,JIS100A,forsealsupto8metersofcapillaryandlevel
models.- Faces: RF and FF.- Temperature Limits:
+10to100C;
+101to150C(byinquiry).
-Notapplicablefordiaphragmthickness:N10.10mm.
-Notapplicableforusewithhousing.
(8) DiaphragmsofTitaniumandMonelavailableonlyin0.1mm,anddiaphragmsofTantalumonlyin0.075mm.
G Grafoil(FlexibleGrafoil) C Copper
7/30/2019 Smar Sr301ce
11/3411
SR30
TheSR301Qisasealwithweldeddiaphragm,whoseassemblyrequestsblindanges.Thediaphragmisextendedfromth
sealangeandweldedtotheextension.DifferentlyfromModelSR301P,itisnotsuppliedwithhousing,becausethediaphrag
coincides with the internal wall of the tank.
Bolts,nuts,gasketsandblindangearenotsuppliedwiththeseal.
Thepressurelimitsareestablishedbypressureclassoftheblindange.
ForDimensionsseethepage22.ForPressureLimitsseetheTables1,2and3inthepage16.
ANSIB-16.5ANSIB-16.5ANSIB-16.5ANSIB-16.5DINEN1092-1(1)DINEN1092-1 (1)DINEN1092-1(1)DINEN1092-1(1)
11/223
4DN40DN50DN80
DN100
12345678
150...600#150...600#150...600#150...600#
PN10...40PN10...40PN10...40PN10...40
Pancake Remote Seal with Extension - SR301Q
MODELSR301Q
PANCAKE REMOTE SEAL WITH EXTENSION
CODE Process Connection, Pressure Class / Standard
Type of Seal and Ordering Code
UAB
CODE Capillary Length
CODE Diaphragm Material
CODE Extension Length
789BA
500mm1000 mm
1500mm2000mm
3000 mm4000mm
123456
5000mm6000mm
8000 mm9000 mm
10000 mm
316LStainlessSteelHastelloyC276Monel400Tantalum
IHMT
Titanium316LStainlessSteelwithTeonLiningTantalumwithTeonLining
GBKH
CODE Fill Fluid
DC200siliconeoilDC704siliconeoilFluorolubeMO-10(2)Syltherm 800NeobeeM20
SDFTN
Glycerin+WaterFomblim06/06Krytox1506Halocarbom4.2
34
50mm(2)100mm(4)
12
150mm(6)200mm(8)
CODE Optional Items*
SpecialOptionsSpecifyZZ
GLC
316LStainlessSteelGoldPlated316LStainlessSteelwithHalarLining(6)HastelloywithTeonLining
SR301Q
*Leaveitblankwhentherearenotoptionalitems.
*I S 12 3
Flange Material
A0-304StainlessSteelA1-316StainlessSteel
F0-316LStainlessSteelF1-C276Hastelloy
Shield Material
H0-Face(ANSI,DIN,JIS)(4)
Optional Items
Face (5)
Extension Material J0-316StainlessSteelJ1-C276Hastelloy
A2-304StainlessSteelWithPVCLiningA3-316StainlessSteelWithPVCLining
F2-304LStainlessSteel(3)F3-SuperDuplex(UNS32750)(3)
F4-Duplex(UNS31803)(3)
Special Procedure P1-DegreaseCleaning(OxygenorChlorineService)
Diaphragm Thickness N0Default(7) N1-0.1mm
Note SR301Q:
(1) MeetsDIN2501PN10...PN40Standard,howeverwithgroovedliningandifmountedwithcounter-angebysolicitedpressureclass.
(2)FluorolubellinguidisnotavailablewithMoneldiaphragm.(3)Itembyinquiry.(4)Thisfacedoesnotcauseinterferencewhenmountedwithcounter-angeswithFlatFace(FF)or
Raised Face (RF).(5)Finishingoftheangefacessealingregions:a-StandardANSIB16.5/MSS-SP6:
Facewithgroovedlining:3.2to6.3mRa(125to250AA);
b-StandardDINEN-1092-1:
GroovedFinishing(PN10toPN100):3.2to12.5mRa(125to500AA);
c-StandardJISB2201:
GrooveFinishing:3.2to6.3mRa(125to250AA).
Whereby:Ra(averageruggedness)andRt(totalruggedness).
(6)Applicableonlyfor:-DiaphragmThicknessof0.05mm.
-Diameters/CapillaryLength:
2ANSIB16.5,DN50DIN,JIS50A,forsealsupto3metersofcapillaryandlevelmodels(by
inquiry).3ANSIB16.5,DN80DIN,JIS80A,forsealsupto5metersofcapillaryandlevelmodels.
4ANSIB16.5,DN100DIN,JIS100A,forsealsupto8metersofcapillaryandlevelmodels.
- Faces: RF and FF.- Temperature Limits:+10to100C;
+101to150C(byinquiry).
-Notapplicablefordiaphragmthickness:N10.10mm.
(7) DiaphragmsofTitaniumandMonelavailableonlyin0.1mm,anddiaphragmsofTantalumonlyin0.075mm.
J2-304LStainlessSteel(3)J3-SuperDuplex(UNS32750)(3) J4-Duplex(UNS31803)(3)
Insulator Kit K0-Without Kit K1-WithKit
7/30/2019 Smar Sr301ce
12/3412
SR301
Stainless316LI
9T
Remote Seal (Low Volume Flange) (3) (7)1/214BSP(WithAdapter)
Grafoil(Flexiblelead)Copper
GC
HastelloyC276SuperDuplex(UNS32750)(11)
23
B4H
Fomblim06/06KrytoxOilHalocarbon4.2
4600#(ANSIB16.5)DN25PN10/40(31)DN40PN10/40(22)DN50PN10/40(22)DN80PN10/40(22)DN100PN10/16(22)DN100PN25/40(22)
D5RE678
2300#(ANSIB16.5)2600#(ANSIB16.53150#(ANSIB16.5)3300#(ANSIB16.5)3600#(ANSIB16.5)4150#(ANSIB16.5)4300#(ANSIB16.5)
AB12C34
B
316LSSTHastelloyC276Tantalum
QRS
TantalumTantalum316LSSTMonel400316LSST
789AD
SiliconeOil(2)InertFluorolubeOil(3) (25)FomblimOilFomblimOil(1)InertKrytoxOil(25)
COD. Flange, Adapter and Drain/Vent Valves material (Low Side)
COD. Wetted ORing Material (Low Side)
COD. Process Connection (Low Side)
316LSST316LSSTHastelloyC276HastelloyC276Monel400
12345
SiliconeOil(2)InertFluorolubeOil(3) (25)SiliconeOil(1) (2)InertFluorolubeOil (1) (3) (25)SiliconeOil(1) (2)
HastelloyC276TantalumMonel400Monel400GoldPlatedMonel400GoldPlated
EGKMP
InertKrytoxOil(1) (25)InertKrytoxOil(25)InertKrytoxOil(1) (25)SiliconeOil(1) (2)InertKrytoxOil(1) (25)
InertHalocarbon4.2Oil(25)InertHalocarbon4.2Oil(1) (2InertHalocarbon4.2Oil(25)
NP
304LStainlessSteelPlatedCS(Drain/VentinStainlessSteel)(21)
HastelloyC276(CW12MW,ASTMA494)(1)
AC
H
316SSTCF8M(ASTMA351)(Drain/VentinHastelloyC276)(1)316SSTCF8M(ASTMA351)FlangewithPVDF(Kynar)insert(3) (4) (5
WithoutORings0 BunaN Note:Oringsarenotavailableonthesideswithremotesea
DU
COD. Drain/Vent Position (Low Side)
WithoutDrain/VentDrain/Vent(OppositetoProcessConnection)
0A
InferiorSuperior
Nota:ForbetterDrain/Ventoperation,ventvalvesarestronglyrecommended.Drain/Ventvalvearenotavailableonthesideswithremoteseals
1
COD. Local Indicator
WithoutIndicator0 WithDigitalindicator
35
1/4-18NPT(WithoutAdapter)1/2-14NPT(WithAdapter)
01
RemoteSeal(WithPlug)(7)1/2-14NPTAxialwithPVDFInsert(3) (4) (6)
COD. Electrical Connection
BZ
1/214NPT(29)3/414NPT(with316SSTadapterfor-14NPT) (26)3/414BSP(with316SSTadapterfor-14NPT) (9)
012
PG13.5DIN (30)Usersspecicatio
COD. Zero and Span Adjust
WithZeroandSpanAdjustment1
COD. Process Connection
1.1/2150#(ANSIB16.5)(22)1"150#(ANSIB16.5) (31)1"300#(ANSIB16.5) (31)1"600#(ANSIB16.5)(31)1.1/2300#(ANSIB16.5)(22)1.1/2600#(ANSIB16.5)(22)2150#(ANSIB16.5)
OUVWPQ9
COD. Material and Flange Type (Level Tap)
316LSST(IntegralFlange)Usersspecication
2Z
COD. Extension Length
10 mm (0)0 50mm(2)
COD. Diaphragm (Level Tap)
567A
316SSTHastelloyC276Monel400Tantalum (10)
1234
Titanium (10)316LSSTwithTeonLining(For2and3)316LSSTGoldplated304LStainlessSteel
Nota:ExtensionMaterial316LS
COD. Fill Fluid (Level Tap)
TNG
DC200SiliconeOilDC704SiliconeOilMO10FluorolubeOil(8)
132
Syltherm800OilNeobeeM20PropyleneGlycolOilGlicerina + gua (5)
COD. Lower Housing Material
WithoutHousing(12)StainlessSteel316
01
COD. Gaskte Material
WithoutGasketTeon(PTFE)
0T
COD. Continues Next Page
Level Transmitter LD300L
TheLD300Lisapressureorleveltransmitterusingahighsideange.Itstechnicalspecicationsandspecications
for precision, drift and temperature effect are the same as the LD300L catalogue. The LD300L is a transmitterforindustrialapplications.Theprocessconnectionscanbesuppliedwithhousingwhennothavinganextension.
ForDimensionsseethepages24(forintegralange)and25(forslip-onange).ForPressureLimitsseetheTables
1,2and3inthepage16.
K Kalrez
JIS40A20K(22)JIS50A10K(22)JIS50A40K(22)JIS80A10K(22)JIS80A20K(22)JIS100A10K(22)Usersspecication
SFTGLHZ
4 200mm(8)
C276Hastelloy(IntegralFlange)304SST(Slip-onFlange)
34
*Leaveitblankwhentherearenotoptionalitems.
LD301 L2 1 I *0 1 1 2 2 1 1 1 TB U 1 0 TYPICALMODELNUMBER
MODEL LEVEL TRANSMITTERS
COD.
-50-250-2500
-25000
L2
L3
L4
L5
LD301LD302LD303
HART
Foundation FieldbusTM
PROFIBUS PA
Range Limits
Min. Mx.Min. Span Unit.
Range Limits
Min. Mx.Min. Span Unit.
502502500
25000
1.252.0820.83
208.30
kPakPakPakPa
-200-36-360-3625
200363603625
50.3
330.2
inH2Opsipsipsi
Note:Therangecanbeextendedupto0.75LRLand1.2URLwith small degradation of accuracy. The upper range valuemustbelimitedtotheangerating.
COD. Diaphragm material and Fill Fluid (Low Side)
Type of Seal and Ordering Code
W WithoutConnection(AbsoluteReference)
316SST(Slip-onFlange)CoatedCarbonSteel(Slip-onFlange)
56
BLC
TantalumwithTeonLining316LStainlessSteelwithHalarLining (20HastelloywithTeonLining
316SSTCF8M(ASTMA351)Monel400 (1)
IM
MonM
T Teon V VitonE Ethylene - Propylene
1/214BSP(with316SSTadapterfor-14NPT) (9)M20x1.5(30)
3A
Z Usersspecication2 100mm(4) 3 150mm(6)
Duplex(UNS31803)(11)StainlessSteel304L
45
7/30/2019 Smar Sr301ce
13/3413
SR30
WithoutPIDM1
Aluminum for saline atmosphere (23) (IPW/TypeX)316SSTforsalineatmosphere (23) (IPW/TypeX)
H2H3
020mA(4wire) (13)
A2A5
CarbonSteel(ASTMA193B7M)(1) (21)HastelloyC276
COD. Flanges Bolts and Nuts Material
COD. Flange Facing Finish (18)
COD. Output Signal
A0A1
COD. Tag Plate
7/16UNF(Default)
COD. Flange thread for xing accessories (adapters, manifolds, mounting brackets, etc)
D0 M12X1.75D2
Q3
Q4
RaisedFaceRF(Default)
FlatFaceFFRingJointFaceRTJ(OnlyavailableforANSIstandardange)(17)
Q0
Q1Q2
Tongue Face (11)
Grooved Face (11)
420mA(Default) G1G0
COD. Housing Material (27) (28)
Aluminum(Default)(IP/Type)316SSTCF8M(ASTMA351)(IP/Type)
H0H1
Withtag,whenspecied(Default)J0
Y3YU
LCD1:Temperature(EngineeringUnit)LCD1:Accordingtousernotes(14)
PlatedCarbonSteel(Default)(21)316SST
COD. PID Conguration
WithPID(Default)M0
COD. LCD1 Indication
LCD1:Percentage(Default)LCD1:CurrentI(mA)LCD1:Pressure(EngineeringUnit)
Y0Y1Y2
Y6YU LCD2:Temperature(EngineeringUnit)LCD2:Accordingtousernotes(14)
COD. LCD2 Indication
LCD2:Percentage(Default)LCD2:Current-I(mA)LCD2:Pressure(EngineeringUnit)
Y0Y4Y5
I4I5I6
EXAM(DMT):Ex-ia;NEMKO:Ex-dCEPEL:Ex-d,Ex-iaWithoutCertication
COD. Identication Plate
FM:XP,IS,NI,DINEMKO:Ex-d,Ex-iaCSA:XP,IS,NI,DI
I1I2I3
P8P9PC
WithoutPaintingSafetyBlueEpoxyElectrostaticPaintingSafetyPolyestersElectrostaticPainting
COD. Painting
GrayMunsellN6,5PolyestersBlack PolyesterWhiteEpoxyYellow Polyester
P0P3P4P5
Special Procedures
BD-DownScale(AccordancetoNAMURNE43specication)BU-UpScale(AccordancetoNAMURNE43specication)
Special Features
C1-DegreaseCleaning(OxygenorChlorineService)(15)C2ForVacuumApplicationC5-MountingaccordingNACEstandard
Burn-out
ZZUsersSpecication.
U0-WithFlushConnectionof1/4NPT(Ifsuppliedwithhousing) U1-WithTwoFlushConnectionsof1/4NPTat180U2-WithTwoFlushConnectionsof1/4NPTat90 U3-WithTwoConnectionsof1/2NPT-14NPTat180(WithLid)
I7I8IM
EXAM(DMT):ClasseI,M1Ex-ia0a20mA:LD301(13)BDSR-GOST:Ex-d,Ex-ia
AccordingtousersnotesJ2
Optional Items*Leaveitblankwhentherearenotoptionalitems.
LD301 A0 D0 F0 TYPICALMODELNUMBERG0 H0 J0 M0 Y0 Y0 I6 P0 *
MODEL LEVEL TRANSMITTERS (CONTINUOUS)
Lower Housing Connection
Type of Seal and Ordering Code
(1)MeetsNACEMR0175/ISO15156recommendations.(2)SiliconeoilnotrecommendedforOxygen(O2)orChlorineService.(3)Notapplicableforvacuumservice.(4)Drain/Ventisnotapplicable.(5)O-ringmaterialmustbeofVitonorKalrez.(6)Maximumpressure24bar.(7)Forremotesealisonlyavailableangein316stainlesssteelCF8M(ASTMA351)(threadM12).(8)FluorolubellsuidnotavailablewithMoneldiaphragm.(9)OptionsnotcertiedforExplosiveAtmosphere.(10)Notrecommendedwithextension.(11)Itembyinquiry.
(12) Supplied without Gasket.(13)WithoutcerticationforExplosionproofcerticationorIntrinsicallysafe.(14)Limitedvaluesto41/2digits;limitedunitto5characters.(15)Degreaserscleaningisnotavailableforcarbonsteelanges.(16)TheinsulatorkitisapplicablewithRaisedFace(HO)andSmoothFace(H1)withGasketmaterial.T(Teon)andonlyforthefollowingmodels:-ANSIuntil#600,DINuntilP40andJISuntil40K;-FormodelswithextensiontheGasketT(Teon)ithasspecialshare.(17)Gasketforhousing,availableonlyinStainless316.(18)Finishingangefaces:
ANSIB16.5/MSS-SP6:-RaisedorSmothFacewithgoovedlining:3.2to6.3mRa(125a250AA);-SmallorLargeTongueFaceandSmallorLargeGroovewithsmoothnishingnotexceeding:3.2mRt(125AA);RTJANSIB16.20/MSS-SP6:-Smoothnishingnotexceeding:1.6mRt(63AA);DINEN-1092-1:-GroovednishingB1(PN10aPN40):3.2a12.5mRa(125a500AA);-SmoothnishingB2(PN63aPN100),C(Tongue)eD(Groove):0.8a3.2mRa(32a125AA).Din2501(DIN2526):-SmoothnishingE(PN160aPN250):Rz=16(3.2mRa(125AA).StandardJisB2201-Groovednishing3.2a6.3mRa(125a250AA).
(19) Temperature application range:-40to150C.(20)Applicableonlyfor:-DiaphragmThicknessof0.05mm.-Diameters/CapillaryLength:2ANSIB16.5,DN50DIN,JIS50A,forsealsupto3metersofcapillaryandlevelmodels(byinquiry).3ANSIB16.5,DN80DIN,JIS80A,forsealsupto5metersofcapillaryandlevelmodels.4ANSIB16.5,DN100DIN,JIS100A,forsealsupto8metersofcapillaryandlevelmodels.- Faces: RF and FF.- Temperature Limits:
+10to100C;+101to150C(byinquiry).-Notapplicablefordiaphragmthickness:N1-0.10mm.-Notapplicableforusewithhousing.(21)Notapplicableforsalineatmosphere.(22) NotavailableforSlip-onange.(23)IPW/TypeXtestedfor200hoursaccordingtoNBR8094/ASTMB117standard.(24) DiaphragmsofTitaniumandMonelavailableonlyin0.1mm,anddiaphragmsofTantalumonlyin0.075mm.(25) TheinertuidguaranteessafetyforOxygen(O2)service.(26)Certicateforuseinexplosiveatmosphere(CEPELandCSA).(27)IPX8testedin10metersofwatercolumnfor24hours.(28) Ingress Protection:
(29) Certiedforuseinexplosiveatmosphere(CEPEL,FM,CSA,NEPSI,NEMKOandEXAM).(30) Certiedforuseinexplosiveatmosphere(CEPEL,NEPSI,NEMKOandEXAM).(31) NotavailableforIntegralange.
Note - LD300L:
Diaphragm Thickness (16) N0-Default(24) N1-0.1mm(11)
AluminumCopperFree(23)(IPW/TypeXH4
K0WithoutKit K1WithKitInsulator Kit
D1 M10X1.5Thread
J1 Blank
U4-WithoutFlushConnect
Product CEPEL NEMKO / EXAM FM CSA NEPSI
LD30X IP66/68/ W I P66/68/W Ty pe4X/6P Type4X IP67
G3 NAMURNE43Extended4-20mA(Burnout3.55and22.8mA)
7/30/2019 Smar Sr301ce
14/3414
SR301
Viton (Approved 3A) (1VBunaNB
UsersSpecicationZ
316LSSTI
TeonT
Sanitary Transmitter LD300S
The LD300S is a transmitter for food applications and others, where sanitary connections are necessary.TheprocessconnectionscanbeThreadedorTri-Clamp,allowingafastandeasyconnectionanddisconnectionofthe
process.Thestandardofliningofthewetsurfaceis32Ra,highlypolished,sothatthesealisfreeofthebreachnotallowing
thelodgingofthefoodorbacteriumthatcaninfecttheprocess.
TheSmarssanitaryequipments(LD300Sand SR301S)canbesuppliedaccordingto3Astandard,the
sanitarypatternmoreacceptedinthefoodindustry,beverageandpharmaceutical.
ForDimensionsseethepages26,27and30.ForPressureLimitsseetheTables5and6inthepage16.
BKH
Fomblim06/06Krytox1506Halocarbom4.2
ThreadedDN80DIN11851withoutextension(10ThreadedDN80DIN11851withextension(10)ThreadedSMS1.1/2-withoutextension(10)ThreadedSMS2-withoutextension (10)ThreadedSMS2-withextension (10)Threaded SMS - 3 - without extension (10)ThreadedSMS3-withextension(10)ThreadedRJT2-withoutextension(10)ThreadedRJT2-withextension(10)ThreadedRJT-3"-withoutextension(10)ThreadedRJT3-withextension(10)ThreadedIDF2-withoutextension(10)ThreadedIDF2-withextension(10)ThreadedIDF-3"-withoutextension(10)ThreadedIDF3-withextension (10)UsersSpecication
WXSE71MC52LB43KZ
EK
Tantalum316LSSTMonel400316LSSTHastelloyC276Tantalum
89ADEG
InertFluorolubeOil(3) (19)FomblimOilFomblimOil(1)InertKrytoxOil(19)InertKrytoxOil(1) (19)InertKrytoxOil(19)
COD. Flange(s), Adapter (s) and Drain Valve(s) Material (Low Side)
COD. Wetted O-Ring Material (Low Side)
COD. Process Connection (Low Side)
316LSST316LSSTHastelloyC276HastelloyC276Monel400Tantalum
123457
SiliconeOil(2)InertFluorolubeOil(3) (19)SiliconeOil(1) (2)InertFluorolubeOil(1) (3) (19)SiliconeOil(1) (2)SiliconeOil(2)
Monel400Monel400GoldPlatedMonel400GoldPlated316LSSTHastelloyC276Tantalum
KMPQRS
InertKrytoxOil(1) (19)SiliconeOil(1) (2)InertKrytoxOil(1) (19)InertHalocarbon4.2Oil(19)InertHalocarbon4.2Oil(1) (19InertHalocarbon4.2Oil(19)
MN
P
PlatedCS(DraininStainlessSteel)(17)HastelloyC276(CW-12MW,ASTM-A494)(1)
316SST-CF8M(ASTM-A351)
CH
I
Monel400(1)316SSTCF8M(ASTMA351)(DraininHastelloyC276)(1)
316SSTCF8M(ASTMA351)FlangewithPVDF(Kynar)insert(3) (4) (5)
WithoutO-RingBunaN
0B
Ethylene - PropyleneKalrez
Note:O-Ringsarenotavailableonthesides with remote seal.
DU
COD. Drain Position (Low Side)
WithoutDrainDrain(Oppositetoprocessconnection)
0A
BottomTop
Note:Forbetterdrainoperation,drainvalvesarestronglyrecommendedDrainvalvearenotavailableonthesideswithremoteseal
1
COD. Local Indicator
WithoutIndicator0 WithDigitalIndicator
35
1/4-18NPT(WithoutAdapter)1/2-14NPT(WithAdapter)
01
RemoteSeal(WithPlugVacuumAssembly)(7)1/2-14NPTAxialwithPVDFinsert(3) (4) (6)
COD. Electrical Connection
3A
1/2-14NPT(23)3/4-14NPT(With316SSTadapterfor1/2-14NPT)(20)3/4-14BSP(With316SSTadapterfor1/2-14NPT)(9)
012
1/2-14BSP(With316SSTadapterfor1/2-14NPT)(9)M20X1.5(24)
COD. Zero and Span Adjust
WithLocalAdjustment1COD. Process Connection
Tri-ClampDN50withextensionTri-ClampDN50HPwithextension(8)Tri-Clamp1.1/2-withoutextensionTri-Clamp1.1/2HP-withoutextension(8)Tri-Clamp2-withoutextensionTri-Clamp2HP-withoutextension (8)Tri-Clamp2-withextensionTri-Clamp2HP-withextension(8)Tri-Clamp3-withoutextensionTri-Clamp3HP-withoutextension(8)Tri-Clamp3-withextensionTri-Clamp3HP-withextension(8)ThreadedDN25-DIN11851-withextension(10)ThreadedDN40-DIN1185-withoutextension(10)ThreadedDN40-DIN11851-withextension(10)ThreadedDN50DIN11851withoutextension(10)ThreadedDN50DIN11851withextension(10)
AOFQDP6NGRIJ8H9UV
COD. Flange Material ( Level Tap)
316LSST2
COD. Diaphragm MaterialHastelloyC276H
TNG
DC200siliconeoilDC704siliconeoilFluorolubeMO-10
Syltherm 800NeobeeM20(Approved3A)(11)Glycerin+Water(12)
COD. Continues next page
TV
TeonViton
MODEL SANITARY TRANSMITTERS
COD.
-50-250-2500
-25000
S2S3S4S5
LD301LD302LD303
HART
Foundation FieldbusTM
PROFIBUS PARange LimitsMin. Mx. Min. Span Unit.
Range LimitsMin. Mx. Min. Span Unit.
502502500
25000
1.252.08
20.83208.30
kPakPakPakPa
-200-36-360-3625
200363603625
50.3
330.2
inH2Opsipsipsi
Nota: Therangecanbeextendedupto0.75LRLand1.2URLwithsmalldegradationofaccuracy.Theupperrangevaluemustbelimitedtotheconnection.
COD. Diaphragm Material and Fill Fluid ( Low Side)
COD. Wet O-ring
WithoutO-ring0
*Leaveitblankwhentherearenotoptionalitems.
LD301 S2 1 I *0 1 A 2 I S TB U 1 0 TYPICALMODELNUMBER
Type of Seal and Ordering Code
COD. Tank Adapter
WithoutTankAdapter0
COD. Tri-Clamp
0
COD. Fill Fluid
SDF
1 2
WithoutTri-Clamp
WithTankAdapterin316SST1
2 WithTri-Clampin304SST
BZ
PG13.5DIN(24UsersSpecica
9T
Remote Seal (Low Volume Flange) (3) (1/2-14BSP(WithAdapter)
7/30/2019 Smar Sr301ce
15/3415
SR30
Note - LD300S:
Burn-out BDDownScale(AccordancetoNAMURNE43specication)BUUpScale(AccordancetoNAMURNE43specication)
Special Procedures
C1DegreaseCleaning(OxygenorChlorineService)(15)C2ForVacuumApplicationC4Polishingofthewetpartsaccordingto3ACertication(11)(12)C5-MountingaccordingNACEstandard
Special Features ZZUsersSpecication
(1)MeetsNACEMR-01-75/ISO15156recommendations.
(2)SiliconeoilnotrecommendedforOxygen(O2)orChlorineService.
(3)Notapplicableforvacuumservice.(4)Drainnotapplicable.(5)O-RingmaterialmustbeofVitonorKalrez.(6)Maximumpressure24bar.(7)Forremotesealisonlyavailableangein316StainlessSteel-CF8M(ASTMA351)(threadM12).
(8)HPHighPressure.(9)OptionsnotcertiedforExplosiveAtmosphere.(10)NotavailableforTri-clamp.(11) 3A-7403Standard:
-NeobeeM2OFillFluid
-FinishingwetFace:0,8mRa(32AA)
-WetO-Ring:Viton
(12)Itembyinquiry.(13)Withoutcerticationforexplosionprooforintrinsicallysafe.
(14)Limitedvaluesto41/2digits;limitedunitto5characters.(15)DegreasecleaningisnotavailableforCarbonSteelFlanges.(16)Temperatureapplicationrange:-40to140CandTables5and6fromthefollowingpage.
(17)Notapplicableforsalineatmosphere.
(18)IPW/TypeXtestedfor200hoursaccordingtoNBR8094/ASTMB117standard.(19) TheinertuidguaranteessafetyforOxygen(O2)service.(20)Certicateforuseinexplosiveatmosphere(CEPELandCSA).
(21) IPX8testedin10metersofwatercolumnfor24hours.(22) Ingress Protection:
(23) Certiedforuseinexplosiveatmosphere(CEPEL,FM,CSA,NEPSI,NEMKOandEXAM).(24) Certiedforuseinexplosiveatmosphere(CEPEL,NEPSI,NEMKOandEXAM).
Optional Itens
WithoutPIDM1
Aluminum for saline atmosphere (18) (IPW/TypeX)316SSTforsalineatmosphere(18) (IPW/TypeX)
H2H3
A2A5
CarbonSteel(ASTMA193B7M)(1) (17)HastelloyC276
COD. Flange Bolts and Nuts Material
COD. Output Signal
A0A1
COD. TAG Plate
7/16UNF(Default)
COD. Flange Thread for xing accessories (adapters, manifolds, mounting brackets, etc)
D0 M10X1.5ThreadD1
420mA(Default)
020mA(4wire)(13)
G0
G1
COD. Housing Material (21) (22)
Aluminum(Default)(IP/Type)316SSTCF8M(ASTMA351)(IP/Type)
H0H1
Withtag,whenspecied(Default)Blank
J0J1
Y3YU
LCD1:Temperature(EngineeringUnit)LCD1:UsersSpecication(14)
PlatedCarbonSteel(Default)(17)316SST
COD. PID Conguration
WithPID(Default)M0
COD. LCD1 Indication
LCD1:Percentage(Default)LCD1:Current-I(mA)LCD1:Pressure(EngineeringUnit)
Y0Y1Y2
Y6YU
LCD2:Temperature(EngineeringUnit)LCD2:UsersSpecication (14)
COD. LCD2 Indication
LCD2:Percentage(Default)LCD2:Current-I(mA)LCD2:Pressure(EngineeringUnit)
Y0Y4Y5
I4I5I6
EXAM(DMT):Ex-ia;NEMKO:Ex-dCEPEL:Ex-d,Ex-iaWithoutCertication
COD. Identication Plate
FM:XP,IS,NI,DINEMKO:Ex-d,Ex-iaCSA:XP,IS,NI,DI
I1I2I3
P8P9PC
WithoutPaintingSafetyBlueEpoxyElectrostaticPaintingSafety Polyester - Electrostatic Painting
COD. Painting
GrayMunsellN6,5PolyesterBlack PolyesterWhiteEpoxyYellow Polyester
P0P3P4P5
I7I8
EXAM(DMT):ClassI,M1Ex-ia0to20mA:LD301 (13)
AccordingtousersnotesJ2
*Leaveitblankwhentherearenotoptionalitems
LD301 A0 D0 G0 TYPICALMODELNUMBERH0 J0 M0 Y0 Y0 I6 P0 *
MODEL SANITARY TRANSMITTERS (CONTINUOUS)
Diaphragm ThicknessN0DefaultN10.1mm (12)
Type of Seal and Ordering Code
H4 AluminumCopperFree(18)(IPW/TypeX)
D2 M12X1.75
Product CEPEL NEMKO / EXAM FM CSA NEPSI
LD30X IP66/68/W IP66/68/ W Type 4X/6P Ty pe4X I P67
G3 NAMURNE43Extended4-20mA(Burnout3.55and22.8mA)
7/30/2019 Smar Sr301ce
16/3416
SR301
150
300
600
900
1500
2500
Thecalibrationmaximumlimitoftheremotesealorleveltransmittershouldbethesmallestvaluebetween
the connectionpressurelimit (Tables 1 to6) andtheupperrangelimit ofthe transmitter (URL).See
transmittersmanual.
Table1-PressureLimit(Bar)-ANSI(ASMEB16.52003)
TemperatureC (F)
Class
- 29 a 38(20 a 100)
50(122)
100(212)
150(302)
200(392)
250(482)
300(572)
325(617)
350(662)
15.9
41.4
82.7
124.1
206.8
344.7
15.3
40.0
80.0
120.1
200.1
333.5
13.3
34.8
69.6
104.4
173.9
289.9
12.0
31.4
62.8
94.2
157.0
261.6
11.2
29.2
58.3
87.5
145.8
243.0
10.5
27.5
54.9
82.4
137.3
228.9
10.0
26.1
52.1
78.2
130.3
217.2
9.3
25.5
51.0
76.4
127.4
212.3
Table2-PressureLimit(Bar)-DIN(EN1092-1/DIN2501)
10
16
25
40
63
100
PN
-10 a 50(14 a 122)
50(122)
100(212)
150(302)
200(392)
250(482)
300(572)
35(66
7.6
12.3
19.2
30.6
48.3
76.6
7.4
11.8
18.5
29.6
46.6
74.0
6.3
10.2
16.0
25.5
40.2
63.9
5.7
9.2
14.5
23.1
36.4
57.8
5.3
8.5
13.3
21.2
33.5
53.1
4.9
7.9
12.4
19.8
31.1
49.4
4.6
7.4
11.7
18.7
29.5
46.8
4
7
11
17
28
44
Table3-PressureLimit(Kgf/cm2)-JISB2201
TemperatureC (F)
10 K
20 K
40 K
PN
120(248)
220(428)
300(572)
350(662)
14.0
34.0
68.0
12.0
31.0
62.0
10.0
29.0
57.0
----
26.0
52.0 Table4-PressureLimit
(Bar) - SR301 R
Temperature
C (F)
2500 psi
Modelo
25(77)
172
Note: Tables 1, 2, 3 e 4
-TheTables1,2and3arebasedontheNormandaresubjecttomodications.Formo
detailsconsultthecorrespondingNorms;
-TheDINEN1092-1normdoesnotassistpressurelimitsforPN160and250;
-Itisnecessaryverifytheapplicationlimitsofthesealinggasket,becausethelimitsca
dounviablethetablesabove;
-Thetemperaturelimitsofthelluidlimitthistables.SeeTable2.5,Section2;
-Tables1,2and4for316Le304L.StainlessSteel.
Notes: Tabelas 5 e 6
ThisTablesarebasedontheNormandare
subjecttomodications.Formoredetails
consulttheNorm:
-Tri-Clamp(TC)-BS4825:Part3;ISO285
-RJT-BS4825:Part5;
-IDF-BS4825:Part4;ISO2853;
-SMS1145;
-DIN-11851(StandardOD).
Table5-PressureLimitTri-
Clamp(TC)(Bar)
DNNormal Pressure
1.1/2
2/DN50
3
34
28
22
20
17
13
100
70
70
60
42
42
High Pressure (HP)
20C (68F) 120C (248F) 20C (68F) 120C (248F)
Table6-PressureLimitforThread(Bar)
DNRJT
DN25
1.1/2 / DN40
2 / DN50
3 / DN80
10
10
10
10
16
16
16
10
40
40
25
25
40
40
25
25
120C (248F)
IDF SMS DIN
120C (248F) 120C (248F) 140C (284F)
Table7-FillingFluidCharacteristics
Fluid
Limit of C Temperature(F) to Pabs < 1 atm
(Vacuum) (3)
Limit of CTemperature (F) to
Pabs > 1 atm
Viscosity(cSt) at 25C Types of Application
SilliconeDC200
SilliconeDC704
FluorolubeMO-10
Syltherm 800
NeobeeM20(1)
Glycerin(50%)andWater(50%)
Fomblim
Krytox
Halocarbon
Density(g/cm3) at
25C
Volumetric ExpansionCoefcient1/C (1/F)
-40to100(-40to212)(3)
0to200(+32to392)(3)
N.A.(2)
N.A.(2)
-15to120(+5to248)(3)
N.A.(2)
-20to100(-4to212)(3)
-40to100(-40to212)(3)
-45to80(-49to176)(3)
-40to170(-40to338)
0to315(+32to599)
-20to100(-4to212)
-40to350(-40to662)
-15to225(+5to437)
-15to93(+5to199.4)
-20to200(-4to392)
-40to120(-40to248)
-45to130(-49to266)
20
39
50
10
9.5
12.5
48
42
5.6
0.950
1.070
1.910
0.934
0.920
1.130
1.87
1.88
1.85
0.001070(0.000594)
0.000950(0.000528)
0.000874(0.000486)
0.001500(0.000833)
0.001008(0.000560)
0.000342(0.000190)
0.000900(0.000500)
0.000900(0.000500)
0.001199(0.000667)
General (Atoxicity, not irritating,odorless, Food Processing)
General(High Temperatures and Vacuum)
Oxygen,Chlorine,NitricAcid
General(PositiveandNegativeExternalTemperature)
Foods, Beverage and Pharmaceuticals
Foods
Lowtoxicity,excellentcompatibilitywithmetals,plasticsandelasto-mers, excellent performance in high vacuum
Inert,nontoxic,biologicallyinert,nonexplosive,nonreactivetoallelatomers, plastics and metals, excellent performance in high vacuum
Inert, low odor, low toxicity, noncorrosive. Standard for manufactureof oxygen and reactive liquids
Legend:(1)PropyleneGlycolDiesterofOctanoato/Decanoato;(2)N.A.Nonapplicable;(3)ConsultgraphsintheFigures1and2whenthevacuumpressureisknown
TemperatureC (F)
8.4
25.1
50.1
75.2
125.4
208.9
Technical Data
7/30/2019 Smar Sr301ce
17/3417
SR30
PressurexTemperatureCurve(1) PressurexTemperatureCurve(2)
Table8-ORingApplicationGuide
Teon
(PTFE)
Viton
Buna N
Table9-ORingMaterialsGuide
AceticAcid,30%
Acetone
Air,below93C(200F)
AmmoniaGas,Cold
Ammonia Gas, Hot
Ammonia, Liquid
CarbonDioxide,Dry
CarbonDioxide,WetCarbonMonoxide
CausticSoda
ChloroDioxide
CitricAcid
CornOil
CottonseedOil
DieselOil
Ethyl Alcohol (Ethanol)
Glycol Ethylene
FishOil
Gasoline
Glucose
Hydrogen
Kerosene
Methane
Milk
MineralOilOliveOil
Oxygen,Gas(Hot)
Oxygen,Liquid
Ozone
Propane
Propylene Glycol
SodiumBicarbonate
Vapour149C(300F)
VegetableOils
Vinegar
Water
Teon
(PTFE)Viton Buna N
S.I.
-
++++
++++
+++
++
++++
++++++++
++++
++
++++
++++
++++
++++
++++
++++
S.I.
+++
++++
S.I.
+++
+++
++++
++++++++
-
-
++++
++++
++++
++++
+++
++
++++
S.I.
++++
++
-
++++
-
-
-
+++
+++++++
-
+++
++++
++++
++++
++++
++
++++
++++
++++
++++
++++
++++
++++
++++
++++++++
++
-
++++
++++
++++
++++
+++
-
++++
+++
++++
+++
-
++++
++++
-
+++
++++
++++++++
+++
-
++++
++++
++++
++++
++++
++++
++++
++++
++++
++++
++++
++++
++++
++++++++
-
-
-
++++
++++
++++
-
-
++++
+++
++++
Table10-(Note3,4and7)-ApplicationGuideofSealingGasket
No Metallic
Metallic
Teon(PTFE)
Flexible
Graphite
Copper
316LStainless
Steel
RingMaterial
Resistance to Temperature inContinuous Service
Recommended Not RecommendedMinimum Tem-
peratureC (F)
Maximum Tem-peratureC (F)
Application Recommended Use and Specication
-23(-10)
-29(-20)
-35(-31)
232(450)
205(400)
135(275)
General Applications, Excellentresistancetoacids,bases,water
and amines
Products of Petroleum,
Silicone Fluids,Diester Fluids.
General Applications, Products ofPetroleum, Silicone Fluids,Fluids to Ethylene Glycol
To avoid solvents andaromatic fuels.
Amines,Cetone,
HotWater/VaporBrake Fluids.
Acids, Brake Fluids,Ozone,Cetones.
Factor (P.T)(Bar x C)
(5)Gasket Material Ambient
Minimum
TemperatureC (F) (8)
Maximum
TemperatureC (F) (8)
MaximumPressure
(Bar absolute)(6)
Ph Hardness(HB)
2700
12000
Upper
25000
Neutro
Oxidante
Vapor
260(500)
3000(5432)
450(842)
650(1202)
260(500)
815(1499)
83
20
(1)
(2)
(2)
0to14
0to14
80
160
-210(-346)
-240(-400)
-240(-400)
--240(-400)
Ambient
Notes: Table 10
(1) Value for gasket without metallic reinforcement.(2)AccordingtopressureclassreferringtoNorm(ANSI,DINandJIS).(3)Thistabledoesnotgasketspecication,onlyindicativeguideforapplication.(4) The corrosion analysis is very important for sealing gasket application.(5)Factor(P.T)=Pressure(Barabs.)xTemperature(C).(6)MaximumPressure-UseContinuous.(7)Forprojectsofgasketotherfactorsmustbeconsideredasthegasketandscrewsqueezing.(8)FormaximumandminimumtemperaturesverifytheLimitsforSeal/Levelllinguids.
(++++)Recommended;(+++)Satisfactory;(++)Transitory;
(-)NotRecommended;(S.I.)WithoutInformation
Technical Data
4 -Halocarbon()5 -Fomblim()
Temperature (C)1 -Fluorolube()2 -NeobeeM20()3 - Glycerin + HO()
8 -SiliconeDC200()9 -SiliconeDC704()
Temperature (C)6 - Syltherm800 ( )7 -Krytox()
Pressure(mmHg)
1100
1000
100
10
1
-40 0 50 100 150 200 250 300 350
(1 atm) 760
2
3
45
1
Pressure(mmHg)
1100
1000
100
10
1
-40 0 50 100 150 200 250 300 350
(1 atm) 760
7
8
6
9
7/30/2019 Smar Sr301ce
18/3418
SR301Dimensions
SR301T (RF/FF/RTJ) - "T" Type Flanged Remote Seal andSR301E (RF/FF/RTJ) - Flanged Remote Seal with Extension
(Integral Flange)
LEVEL DIAPHRAGM WITHOUT EXTENSION
LEVEL DIAPHRAGM WITH EXTENSIONExtension
O-RING
7/30/2019 Smar Sr301ce
19/3419
SR30Dimensions
DIMENSIONS IN mm (in)EXTENSION LENGTH: 0 , 50 , 100 , 150 OR 200
FLANGES 1500 AND 2500 WITH EXTENSION HAVE SUPPLYING UNDER CONSULT*
DIMENSIONS
# HOLES
# HOLES
# HOLES
DIMENSIONS
DIMENSIONS
7/30/2019 Smar Sr301ce
20/3420
SR301
SR301T (RF/FF/RTJ) - "T" Type Flanged Remote Seal andSR301E (RF/FF/RTJ) - Flanged Remote Seal with Extension
(Slip-on Flange)
Dimensions
E
D
F2
B
A
C 12
G
F
B
A
7.2C
Extension
E
REMOTE SEAL DIAPHRAGM WITHOUT EXTRENSION
REMOTE SEAL DIAPHRAGM WITH EXTENSION
(0.28)
F1
B
A
E
C
RF FACE FF FACE RTJ FACE
168.1209.5
190.5
215.9600
4" 300
600
150
273
228.6
254 200
120.7
152.4
168.1
CLASS
3"
150
300
600
2"
150
300
165.1
190.5
209.5
A
152.4
165.1
ANSI-B 16.5 DIMENSIONS
127
127
B
(6)
(6.5)
(7.5)
(8.25)
(9)
(10)
(10.75)
(6.5)
(8.25)
(4.75)
(5)
(6)
(6.62)
(7.5)
(7.87)
(8.5)
(5)
(6.62)
DN
158
158
158
127
127
127
92
92
92
(3.62)
(5)
(6.22)
(3.62)
(3.62)
(5)
(5)
(6.22)
(6.22)158
158
158
127
127
127
92
92
92
(5)
(6.22)
(3.62)
(3.62)
(5)
(5)
(6.22)
(6.22)
(3.62)
F (RF) F1 (FF) F2 (RTJ)
174.6
174.6
171.5
146.1
133.4
146.1
107.9
101.6
107.9
(4.00)
(5.25)
(6.75)
(4.25)
(4.25)
(5.75)
(5.75)
(6.87)
(6.87)
19
19
22
19
22
22
19
25
19
31.8
38.1
30.2
22.3
22.3
27
25.4
17.5
20.7
C E
(0.75)
(0.87)
(1)
(0.87)
(0.75)
(0.75)
(0.75)
(0.87)
(0.75)
(0.69)
(0.8)
(1)
(0.87)
(1.06)
(1.25)
(0.87)
(1.18)
(1.5)
73
8
8
8
8
# HOLES
73
73
48
48
48
G
4
8
8
4
8
(1.89)
(1.89)
(1.89)
(2.87)
(2.87)
(2.87)
89
89
89 (3.5)
(3.5)
(3.5)
D
123.8
149.2
149.2
149.2
114.3
123.8
82.6
82.6
82.6
(3.25)
(3.25)
(3,25)
(4.50)
(4.87)
(4.87)
(5.87)
(5.87)
(5.87)
1 1/2"
1"
150
300/600
150
300/600
79.4
114.3
127
156
108
124
98.4
8.9
(4.25)
(4.88)
(6.14)
(5)
(3.16)
(3.5)
(4.5)
(3.87)
73
73
50.8
50.8
(2)
(2.87)
(2)
(2.87)
73
73
50.8
50.8
(2.87)
(2)
(2.87)
(2)
19
16
22
16
22.2
17.5
14.3
17.5
(0.63)
(0.75)
(0.87)
(0.63)
(0.56)
(0.69)
(0.69)
(0.87) 40
40
4
4
4
4
(1.57)
(1.57)
-
-
-
-
-
-
-
-
-
-
18160
100
10/40 200 24
PN
80
50
A
EN 1092-1 / DIN2501 DIMENSIONS - RF/ FF
B C
138 8
E F G
(7.87) (0.71) (5.43)(0.95)(6.30)
DN
73 (2.87)
1812510/40 165 20 102 48 4(6.50) (1.89)(0.71) (4.01)(0.78)(4.92)
1818010/16 220 20 158 8(8.67) (0.71) (6.22)(0.78)(7.08) 89 (3.5)
2219025/40 235 24 162 8(9.25) (0.87) (6.38)(0.95)(7.50) 89 (3.5)
# HOLES
40
25
1811010/40 150 18 88 4(5.91) (0.71) (3.46)(0.71)(4.33) 73 (2.87)
148510/40 115 18 68 4(4.53) (0.55) (2.68)(0.71)(3.35) -
NOTES:- EXTENSIONS LENGTH IN mm(in): 0, 50 (1.96), 100 (3.93), 150 (5.9) or 200 (7.87)- DIMENSIONS IN mm(in)
7/30/2019 Smar Sr301ce
21/3421
SR30Dimensions
SR301R - Threaded Remote Seal
C
B
A
Lower housing with NPT thread
according to data sheet
DRAIN NOT AVAILABLE FOR 1.1/2"NPT
DIMENSIONS IN MM (")
Drain or vent
optional
Sealing
gasket
LIMIT
2500PSI
A
89 (3.50)
B
76 (2.99)
C
51 (2.01)
# HOLES
6
7/30/2019 Smar Sr301ce
22/3422
SR301Dimensions
SR301P - Pancake Remote Seal without ExtensionSR301Q - Pancake Remote Seal with Extension
C
DIMENSIONSEMMM(")EXTENSIONSLENGTH:0,50,100,150OR200*FLANGES1500AND2500WITHEXTENSIONHAVESUPPLYINGUNDERCONSULT
ANSI-B16.5
DN CLASS C OB OA
1.1/2" 150...600 30 (1.18) 39.5(1.55) 73.2(2.88)
2 " 15 0. .. 60 0 30 (1.18) 47.5(1.87) 92(3.62)
3 " 15 0. .. 60 0 30 (1.18) 72.5(2.85) 127(5)
4 " 1 50 .. .60 0 30 (1.18) 95.5(3.76) 157.2(6.19)
EN1092-1/DIN2501
DN PN C OB OA
40 10...40 30 (1.18) 39.5(1.55) 88(3.46)
50 10...40 30 (1.18) 47.5(1.87) 101.6(4)
80 10...40 30 (1.18) 72.5(2.85) 138(5.43)
100 10...40 30 (1.18) 95.5(3.76) 162(6.38)
WITHEXTENSION
7/30/2019 Smar Sr301ce
23/3423
SR30Dimensions
Lower Housing
PANCAKE
SealingGasket
SealingGasket O-Ring
LowerHousing
LowerHousing Lower
HousingDrain /Vent Valve
Drain /Vent Valve Drain /
Vent Valve
DIMENSIONS IN MM ()
ANSI-B 16.5 DIMENSIONS
ALL
ALL
DIN EN1092-1/ DIN2501/2526 FORM D DIMENSIONS
JIS B 2202 DIMENSIONS
DIMENSIONS IN MM ()
ANSI-B 16.5 DIMENSIONS - RTJ FACE
O-RING
7/30/2019 Smar Sr301ce
24/3424
SR301Dimensions
LD300L (RF/FF/RTJ) - Level Transmitter(Integral Flange)
O-RING
CONDUITCONNECTION
C1 C2
F1
RF FACE RTJ FACEFF FACE
PLUG
83
100
72.5
181
(3.94)
(2.85)
(3.2
7)
(7.1
3)
DIAPHRAGM WITHOUT EXTENSION
DIAPHRAGM WITH EXTENSION
94.2 C EXTENSION
G
E
A
B
F
D
LOCK
(3.27)
83
TERMINALCONNECTIONS
Allow 150 mm minimum for local zeroand span adjustment with magnetic tool
1/2 NPT
(4.45)113
32.8
+1
-0
(1.29) (3.72)
140
(5.5
1)
NOTE-EXTENSION LENGTH IN (mm): 0, 50, 100, 150 OR 200-DIMENSIONS IN mm (in)
DIMENSIONS
DIMENSIONS
# HOLES
# HOLES
# HOLES
DIMENSIONS
7/30/2019 Smar Sr301ce
25/3425
SR30
LD300L (RF/FF/RTJ) - Level Transmitter(Slip-on Flange)
Dimensions
1/2 NPT
LOCK
G
C
154.8 max.
(6.1)
E
F
B
A
97
(3.80)
83(3.27)
83
100
72.5
113
181
(3.94)
(2.85)
(4.45)
(3.27)
( 7 1 3 )
7.2
(0.28)
98
(3.85)
C
B
A
E
F1
E
12
RF FACE
FF FACE RTJ FACE
D
F2
B
A
C
49 max.
(1.93)
168.1209.5
190.5
215.9600
4" 300
600
150
273
228.6
254 200
120.7
152.4
168.1
CLASS
3"
150
300
600
2"
150
300
165.1
190.5
209.5
A
152.4
165.1
ANSI-B 16.5 DIMENSIONS
127
127
B
(6)
(6.5)
(7.5)
(8.25)
(9)
(10)
(10.75)
(6.5)
(8.25)
(4.75)
(5)
(6)
(6.62)
(7.5)
(7.87)
(8.5)
(5)
(6.62)
DN
158
158
158
127
127
127
92
92
92
(3.62)
(5)
(6.22)
(3.62)
(3.62)
(5)
(5)
(6.22)
(6.22)158
158
158
127
127
127
92
92
92
(5)
(6.22)
(3.62)
(3.62)
(5)
(5)
(6.22)
(6.22)
(3.62)
F (RF) F1 (FF) F2 (RTJ)
174.6
174.6
171.5
146.1
133.4
146.1
107.9
101.6
107.9
(4.00)
(5.25)
(6.75)
(4.25)
(4.25)
(5.75)
(5.75)
(6.87)
(6.87)
19
19
22
19
22
22
19
25
19
31.8
38.1
30.2
22.3
22.3
27
25.4
17.5
20.7
C E
(0.75)
(0.87)
(1)
(0.87)
(0.75)
(0.75)
(0.75)
(0.87)
(0.75)
(0.69)
(0.8)
(1)
(0.87)
(1.06)
(1.25)
(0.87)
(1.18)
(1.5)
73
8
8
8
8
# HOLES
73
73
48
48
48
G
4
8
8
4
8
(1.89)
(1.89)
(1.89)
(2.87)
(2.87)
(2.87)
89
89
89 (3.5)
(3.5)
(3.5)
D
123.8
149.2
149.2
149.2
114.3
123.8
82.6
82.6
82.6
(3.25)
(3.25)
(3.25)
(4.50)
(4.87)
(4.87)
(5.87)
(5.87)
(5.87)
1 1/2"
1"
150
300/600
150
300/600
79.4
114.3
127
156
108
124
98.4
88.9
(4.25)
(4.88)
(6.14)
(5)
(3.16)
(3.5)
(4.5)
(3.87)
73
73
50.8
50.8
(2)
(2.87)
(2)
(2.87)
73
73
50.8
50.8
(2.87)
(2)
(2.87)
(2)
19
16
22
16
22.2
17.5
14.3
17.5
(0.63)
(0.75)
(0.87)
(0.63)
(0.56)
(0.69)
(0.69)
(0.87) 40
40
4
4
4
4
(1.57)
(1.57)
-
-
-
-
-
-
-
-
-
-
18160
100
10/40 200 24
PN
80
50
A
EN 1092-1 / DIN2501 DIMENSIONS - RF/ FF
B C
138 8
E F G
(7.87) (0.71) (5.43)(0.95)(6.30)
DN
73 (2.87)
1812510/40 165 20 102 48 4(6.50) (1.89)(0.71) (4.01)(0.78)(4.92)
1818010/16 220 20 158 8
(8.67) (0.71) (6.22)(0.78)(7.08)
89
(3.5)
2219025/40 235 24 162 8(9.25) (0.87) (6.38)(0.95)(7.50) 89 (3.5)
# HOLES
40
25
1811010/40 150 18 88 4(5.91) (0.71) (3.46)(0.71)(4.33) 73 (2.87)
148510/40 115 18 68 4(4.53) (0.55) (2.68)(0.71)(3.35) -
Allow 150 mm for local zero andspan adjustment with magnetic tool
ELECTRICCONNECTION
LEVEL DIAPHRAGM WITHOUT EXTENSION TERMINALCONNECTIONS
Plug
LEVEL DIAPHRAGM WITH EXTENSION
Extension
(Without Adapter)
Drain/Vent Valve
(With Adapter)
Adapt
1/4-18 NPT
1/2-14 NPT
-FOR 1 AND DN25 THE EXTENSION LENGTH IS 0 mm
7/30/2019 Smar Sr301ce
26/3426
SR301
LD300S Sanitary Transmitter with Extension
DimensionsseeTable11
Dimensions
CONDUITCONNECTION
91.2
LOCK
32.8
+1-0
67.6+2-0
Allow 150 mm minimum for local zeroand span adjustment with magnetic tool
D
G
D
C
ext.
G
D
C
ext.
E
C
D
G
ext.
F
E
C
D
G
ext.
E
C
G
D
ext.
E
DIN 11851SMS
RTJ
IDF
E
High Pressure - HPE
TRICLAMP
TANKADAPTER
O-RING
TRICLAMP
TRICLAMP
A
A
AA
A
F
F
F
F
O-RING
TANKADAPTER
O-RING
O-RINGO-RING
TANKADAPTER
TANKADAPTER
TANKADAPTER
7/30/2019 Smar Sr301ce
27/3427
SR30Dimensions
LD300S Sanitary Transmitter without Extension
DimensionsseeTable11
CONDUITCONNECTION
91.2
LOCK
32.8
+1-0
67.6+2-0
Allow 150 mm minimum for local zeroand span adjustment with magnetic tool
D
F
E
C
E
High Pressure - HPE
C
F
C
TRICLAMP
TRICLAMP
C
E
D
F
RTJ
TANKADAPTER
O-RING
F
E
D
C
IDF
SMS
TRICLAMP
D
C
F
E
DIN 11851
A
AA
A
A
O-RING
TANKADAPTER
TANKADAPTER
O-RING
O-RING
TANKADAPTER
TANKADAPTER
O-RING
7/30/2019 Smar Sr301ce
28/3428
SR301
SR301S Sanitary Remote Seal with Extension
DimensionsseeTable11
Dimensions
D
G
D
C
ext.
G
D
C
ext.
E
C
D
G
ext.
F
E
C
D
G
ext.
E
C
G
D
ext.
E
DIN 11851SMS
RTJ
IDF
E
High Pressure - HPE
TRICLAMP
TANKADAPTER
ORING
A
A
AA
A
80
CAPILLARY
F
F
F
F
TRICLAMP
TRICLAMP
ORINGTANKADAPTER
ORINGTANKADAPTER
ORING TANKADAPTER ORING
TANKADAPTER
7/30/2019 Smar Sr301ce
29/3429
SR30Dimensions
SR301S Sanitary Remote Seal without Extension
DimensionsseeTable11
D
F
E
C
E
High Pressure - HPE
C
F
C
TANKADAPTER
ORING
C
E
D
F
RTJ
F
E
D
C
IDF
SMS
TRICLAMP
D
C
F
E
DIN 11851
A
AA
A
A
80
CAPILLARY
TRICLAMP
TRICLAMP
ORING
TANKADAPTER
TANKADAPTER
ORING
ORING
TANKADAPTER
ORING
TANKADAPTER
7/30/2019 Smar Sr301ce
30/3430
SR301Dimensions
Table11-SR301S/LD300STablerelativetodimensionaldrawingsfrompages26,27,28and29
A DC
SR301S / LD300S - Dimensions em mm ()
E F G EXT.
8(0.315)
12(0.47)
12(0.47)
12(0.47)
12(0.47)
12(0.47)
12(0.47)
13(0.51)
15(0.59)
16(0.63)
12(0.47)
12(0.47)
12(0.47)
15(0.59)
15(0.59)
12(0.47)
12(0.47)
63.5(2.5)
50(1.96)
50(1.96)
63.5(2.5)
63.5(2.5)
91(3.58)
91(3.58)
56(2.2)
68.5(2.7)
100(3.94)
55(2.16)
65(2.56)
93(3.66)
66.7(2.63)
92(3.62)
60.5(2.38)
87.5(3.44)
76.5(3.01)
61(2.4)
66(2.59)
76.5(3.01)
81 (3.19)
110(4.33)
115(4.53)
78(3.07)
92(3.62)
127(5)
74(2.91)
84(3.3)
113(4.45)
86(3.38)
112(4.41)
76(2.99)
101.6(4)
18(0.71)
18(0.71)
25(0.98)
18(0.71)
25(0.98)
18(0.71)
25(0.98)
21(0.83)
22(0.86)
29(1.14)
25(0.98)
26(1.02)
32(1.26)
22(0.86)
22.2(0.87)
30 (1.18)
30 (1.18)
47.5(1.87)
35(1.38)
35(1.38)
47.6(1.87)
47.6(1.87)
72(2.83)
72(2.83)
38(1.5)
50(1.96)
81 (3.19)
35(1.38)
48.6(1.91)
73(2.87)
47.6(1.87)
73(2.87)
47.6(1.87)
73(2.87)
---
---
------
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
------
---
---
---
---
---
---
---
---
---
---
---
---
---
A DC E F G EXT.
SR301S / LD300S - Dimensions em mm ()
8(0.315)
8(0.315)
8(0.315)
8(0.315)
8(0.315)
8(0.315)
6(0.24)
8(0.315)
8(0.315)
8(0.315)8(0.315)
8(0.315)
8(0.315)
8(0.315)
8(0.315)
8(0.315)
63.5(2.5)
63.5(2.5)
63.5(2.5)
63.5(2.5)
91(3.58)
91(3.58)
47.5(1.87)
56(2.2)
68.5(2.7)
100(3.94)65(2.56)
93(3.66)
66.7(2.63)
92(3.62)
60.5(2.38)
87.5(3.44)
76.5(3.01)
81 (3.19)
76.5(3.01)
81 (3.19)
110(4.33)
115(4.53)
63(2.48)
78(3.07)
92(3.62)
127(5)84(3.3)
113(4.45)
86(3.38)
112(4.41)
76.2(3)
101.6(4)
18(0.71)
25(0.98)
18(0.71)
25(0.98)
18(0.71)
25(0.98)
21(0.83)
21(0.83)
22(0.86)
29(1.14)26(1.02)
32(1.26)
22(0.86)
22.2(0.87)
30 (1.18)
30 (1.18)
50.5(1.99)
50.5(1.99)
50.5(1.99)
50.5(1.99)
72.5(2.85)
72.5(2.85)
43.2(1.7)
50.5(1.99)
50.5(1.99)
72.5(2.85)50.5(1.99)
72.5(2.85)
50.5(1.99)
72.5(2.85)
50.5(1.99)
72.5(2.85)
80(3.15)
80(3.15)
80(3.15)
80(3.15)
100(3.94)
100(3.94)
80(3.15)
80(3.15)
80(3.15)
100(3.94)80(3.15)
100(3.94)
80(3.15)
100(3.94)
80(3.15)
100(3.94)
48(1.89)
48(1.89)
48(1.89)
48(1.89)
50(1.96)
50(1.96)
26.3(1.03)
48(1.89)
48(1.89)
50(1.96)48(1.89)
50(1.96)
48(1.89)
50(1.96)
48(1.89)
50(1.96)
CONNECTION WITHOUTEXTENSION
Tri-ClampDN50-withoutextension
Tri-Clamp-11/2"-withoutextension
Tri-Clamp-11/2"HP-withoutextension
Tri-Clamp-2"-withoutextension
Tri-Clamp-2"HP-withoutextension
Tri-Clamp-3"-withoutextension
Tri-Clamp-3"HP-withoutextension
ThreadedDN40-DIN11851-withoutextension
ThreadedDN50-DIN11851-withoutextension
ThreadedDN80-DIN11851-withoutextension
ThreadedSMS-11/2"-withoutextension
ThreadedSMS-2"-withoutextension
ThreadedSMS-3"-withoutextension
ThreadedRJT-2"-withoutextension
ThreadedRJT-3"-withoutextension
ThreadedIDF-2"-withoutextension
ThreadedIDF-3"-withoutextension
CONNECTION WITHEXTENSION
Tri-ClampDN50-withextension
Tri-ClampDN50HP-withextension
Tri-Clamp-2"-withextension
Tri-Clamp-2"HP-withextension
Tri-Clamp-3"-withextension
Tri-Clamp-3"HP-withextension
ThreadedDN25-DIN11851-withextension
ThreadedDN40-DIN11851-withextension
ThreadedDN50-DIN11851-withextension
ThreadedDN80-DIN11851-withextensionThreadedSMS-2"-withextension
ThreadedSMS-3"-withextension
ThreadedRJT-2"-withextension
ThreadedRJT-3"-withextension
ThreadedIDF-2"-withextension
ThreadedIDF-3"-withextension
7/30/2019 Smar Sr301ce
31/3431
SR30SYSTEM302 Architecture
All-in-oneStation
Internet
AutoTuning
AdvancedControl
-MES(Manu
fac
turing
Execu
tion
Sys
tem
)
-ERP(En
terprise
Resource
Plann
ing
)
-CRM
(Cus
tomer
Re
lations
hipManagemen
t)
Rou
teror
Firewa
llCorporateNetwork
Intranet
Mo
dbus
TCP
Pac
kage
Un
its
Legacy
Sys
tems
CLP
F&G
ESD
Mo
dbus
RTU
DFI302
(Re
dun
dan
t
Con
tro
ller)
FiberOpticRing
DFI302
(Redund
ant
Controlller)
orFlow
Computer
Communication
Server
Server
Server
Matrix
Printer
Laser
Printer
Maintenance
Eth
ernet
HI302
(HART/F
Fieldbus
OUNDATION
TM
converter)
DFI302 P
A
DFI302
DF
I302
Engineering
Maintenance
Alarma
ndEvent
Management
HistoricalTrend
Management
DC302
(RemoteI/O)
InDiscrete
Out
Discrete
...
IntrinsicSafe
ty
Barrier
Fisco
FOUNDATIONTM
Channel1
...
FOUNDATIONTM
H1I.S.
DP
I.S
.
Discre
te
I/O
4-
20m
A
DFI302
(Con
tro
llerw
ithI/O
mo
du
les
)
4-2
0m
A
I.S
.
Discre
teI/O
Channel8
Communication
Server
Communication
Server
Communication
Server
Com
munication
Serv
er
7/30/2019 Smar Sr301ce
32/3432
SR301Main Smar Products
Pressure
Position
FY301
FY302
FY303
FY400
Valve Positioner Valve Positionerwith auto tuning
PressureTransmitter
HART-USB InterfaceHI321
HART-RS232Interface HI311
Pressure
Transmitter
PressureTransmitter with
high performance
Intelligent Density /Concentration
Transmitter
Level Density/Concentration
FY301
FY302
FY303
TP301
TP302
TP303
Valve Positioner withremote sensor
Position Transmitter
Junction Box
3 Ways Junction BoxJM1
4-20 mA
4 Ways Junction BoxJM400
4-20 mA
Temperature
Temperature
Transmitter
TT301
TT302
TT303
Panel MountingTemperature
Transmitter
TT411
Head MoutingTemperature
Transmitter
TT421
InterfacesCongurators
HARTConfiguratorInterface CONF401
HARTConfiguratorfor Palm HPC301
HARTConfiguratorInterface DDCON 100
Pressure, Level and Flow
LD291
LD292
LD293
4-20 mA LD290
LD301
LD302
LD303
LD400
RD400 DT301
DT302
DT303
LD1.0
Level TransmitterGauge EconomicCapacitive Pressure
Transmitter
7/30/2019 Smar Sr301ce
33/3433
SR30Main Smar Products
Converters
Interface Universal Fieldbus
DFI302
TM
DeviceNet
Controllers
Programmable LogicalController
LC700
TM
DeviceNet
Digital ControllerCD600Plus
Studio302
System302 Management Tool
ProcessViewProcess Visualization Tool
AssetView
On Line Plant AssetManagement Tool
Systems
TM
DeviceNetTM
DeviceNet
TM
DeviceNet
Equipment DatabasePlant Information Management
SysconSystem Configurator
LogicView
IEC61131Programming Tool
Fieldbus to PneumaticSignal Converter
FP302
FP303
Current to FieldbusConverter
IF302
IF303
HART / Fieldbus
Interface HI302
HART/ Current
Converter HCC30
Fieldbus to Current
Converter
FI302
FI303
7/30/2019 Smar Sr301ce
34/34
SR301
smar
Specicationsandinformationaresubjecttochangewithoutnotice.
Up-to-dateaddressinformationisavailableonourwebsite.
web:www.smar.com/contactus.asp
www.smar.com
SR301