(SIP) Structural Insulated Panel LaminatingLiquid PUR Systems WITH BEAD EXTRUDERSLiquid PUR Systems Liquid PUR Systems
SIP LIQUID POLYURETHANE SYSTEMS with Bead ExtrudersMidwest Automation, is a leading manufacturer of structural insulated panel (SIP) laminating systems, including PUR systems are designed to dispense one-part, moisture cure polyurethane adhesives that are not compatible in a roll coating process. These extremely fast curing products have been specifi cally formulated as a structural adhesive for laminating oriented strand board (OSB) to expanded polystyrene (EPS) cores, as typically used in structural insulated panel (SIP) construction. Bottom line? We help you laminate better, increase productivity, and improve quality.
BE 418T STANDARD SIP LAMINATING SYSTEMwith Traversing Gantry for Single Panels
• Bulk adhesive stand with day barrel, Nordson pump and controls,
heated hoses, and desiccant column
• BE 418T traversing gantry with Eco-Track® dispensing heads and water spray system
• On-board electrical enclosure with PLC controlled sequence of operation
• Operator interface (HMI) with color monitor
• Heavy-duty transport conveyor with gravity rollers and stainless steel drip pans
• VP 418C vacuum press(es) with Busch™ vacuum pumps
• Maximum panel size is 4 ft X 18 ft (1.2 X 5.5 m)
SYSTEM INCLUDES
BUILDING WITH SIP PANELS• SIPs conserve natural resources• SIPs provide healthier indoor living environments• SIPs are energy-efficient• SIPs are strong for lasting durability• SIPs save construction time and money
Control Panel Eco-Track® Dispensing Head Water Spray System
Operator interface with color display, PLC controlled sequence of operation
Eco-Track® dispensing head assembly with 24 dispensing tubes per foot
One water nozzle for each 12- inch dispensing head to facilitate curing
SIP LIQUID POLYURETHANE SYSTEMS
a leading manufacturer of structural insulated panel (SIP) laminating systems, designed to dispense one-part, moisture cure polyurethane adhesives that
are not compatible in a roll coating process. These extremely fast curing products have been specifi cally formulated as a structural adhesive for laminating oriented strand board (OSB) to expanded polystyrene (EPS) cores, as typically used in structural insulated panel (SIP) construction. Bottom line? We help you laminate better, increase productivity, and improve quality.
BE 418T STANDARD SIP LAMINATING SYSTEMwith Traversing Gantry for Single Panels
• Bulk adhesive stand with day barrel, Nordson pump and controls,
®
BUILDING WITH SIP PANELS• SIPs conserve natural resources• SIPs provide healthier indoor living environments• SIPs are energy-efficient• SIPs are strong for lasting durability• SIPs save construction time and money
VP 418C Vacuum Press with clam shell opening operates up to 14.6 PSI to hold the panel under pressure while adhesive cures.The design incorporates a counter-weight for ease of operation.
SIP LIQUID POLYURETHANE SYSTEMS with Bead Extruders
BE 412TS STANDARD SIP LAMINATING SYSTEMwith Traversing Gantry for Stacked Panels
SYSTEM INCLUDES
Acu-Track® Dispensing Head
Manifold Assembly
with Traversing Gantry for Stacked Panels
System includes:• Bulk adhesive stand with day barrel, Zenith® pump and controls, heated hoses, and desiccant column
• BE 412TS traversing gantry with automatic vertical adjustment for stacked panel production
• Eco-Track® or Acu-Track® dispensing head options
• On-board electrical enclosure with Allen-Bradley MicroLogix™ PLC controlled sequence of operation
• Allen-Bradley PanelView™ (HMI) with color monitor
• Heavy-duty transport conveyor with gravity or optional powered rollers and stainless steel drip pans
• Optional overhead JIB crane with vacuum lift
• Two (2) CP 412-SIP Hydraulic Cold Presses with gravity or optional powered rollers
• Produces panels from 4 ft X 8 ft up to 4 ft X 12 ft in size(1.2 X 3.6 m)
ENGINEERING FLOOR PLAN DRAWING
Patented Acu-Track® dispensing head with 24 nozzles per foot for uniform adhesive coverage
12-inch wide adhesive manifold with individual shut-off valves
Traversing Gantry with Vertically Adjusting Heads
SIP LIQUID POLYURETHANE SYSTEMS with Bead Extruders
BE 424TS STANDARD SIP LAMINATING SYSTEMwith Traversing Gantry for Stacked Panels
SYSTEM INCLUDESSYSTEM INCLUDES
Got a SmartPhone?Scan our QR Code for a
SIP 424TS video demonstration
on your mobile.
BE 424TS STANDARD SIP LAMINATING SYSTEMwith Traversing Gantry for Stacked Panels
SYSTEM INCLUDESSYSTEM INCLUDES
ENGINEERING FLOOR PLAN DRAWING
Hydraulic Cold Presses
A-B operator interface with color display. PLC controlled sequence of operation.
Allen-Bradley PanelView™ HMI
• Bulk adhesive stand with day barrel, Zenith® gear pump and controls,
heated hoses, and desiccant column
• BE 424TS traversing gantry with automatic vertical adjustment
for stacked panel production
• Eco-Track® or Acu-Track® dispensing head options
• On-board electrical enclosure with Allen-Bradley
MicroLogix™ PLC controlled sequence of operation
• Allen-Bradley PanelView™ (HMI) with color monitor
• Heavy-duty transport conveyors with powered rollers
and stainless steel drip pans
• Optional overhead JIB crane with vacuum lift
• CP 424-SIP Hydraulic Cold Press with optional electronic cylinder
isolation and powered rollers
• Produces panels from 4 ft X 8 ft up to 4 ft X 24 ft in size (1.2 X 2.4 m)
CP 400 SIP SERIES COLD PRESSESClose Up Shots Optional Equipment
Hydraulic Cylinders Powered Rollers Side Transfer Cart
Jib Crane with Vacuum Lift
CP 424 SIP Hydraulic Press
Powered rollers with manual forward and reverseTwelve 2.5-inch diameter cylinders with rack & pinion guiding system
Floor-mounted jib crane with self-contained vacuum lift.
CP 424 SIP Presses include hydraulic pump and cylinders, rack & pinion guiding, pressure recovery system, PLC controlled sequence of operation, operator interface,
and electronic cylinder isolation valves.
Transfer cart with powered side shift and roller conveyor.
ACU-TRACK® BE 424TSClose Up Shots
TYPICAL SIP CONSTRUCTIONFor Energy-Efficient & Affordable Housing
Bulk adhesive stand with heated day barrel, Zenith® pump and electronic controls
Traversing gantry with four 12-inch manifold assemblies and water misting system
Patented dispensing head with 24 nozzles per footfor uniform adhesive coverage
12-inch wide adhesive manifold with individual shut-off valve
Patented adhesive nozzle utilizes stainless steel pin, Tefl on® seals & special compression fi ttings
Water misting system with one stainless steel spray gun per manifold
Traversing Gantry
Adhesive Stand
Dispensing Head Manifold Assembly
Adhesive Nozzle
Misting System
U.S. Patent 6,308,864 B1
© 01.01.2015 Midwest Automation LLC
YOUR REQUIREMENTS DRIVE OUR BUSINESS.Midwest Automation is a family owned U.S. manufacturing company located in Minneapolis Minnesota.
For companies who care where the products they buy are made, it will come as no surprise that buying American is not as easy as it used to be. If you look closely you will discover that many of the machines represented to be “American made” are in fact imported from foreign countries.
For over 60 years, Midwest Automation has manufactured industrial machinery for the woodworking, composite panel and metalworking industries using U.S. labor, and locally available components whenever possible.
Our extensive application knowledge, coupled with creative machine designs, allows us to provide unique and reliable solutions that improve your manufacturing processes, supported by local parts and service.
If you are looking for an industrial machinery manufacturer with real application expertise, contact Midwest Automation today.
Manufacturing results since 1959.
2645 26th Avenue SouthMinneapolis, MN 55406phone (612) 721-5347 www.midwestautomation.com
Building Profits Together
Got a SmartPhone?Scan our QR Code to browse our website
on your mobile.