C-SeriesShort Form Data Sheet
Wheaterproof IP 66 -EN 60529(Nema 4X)
Cast Aluminum:Oven baked powder coating
hammertone grey
Repeatablity: typical 0.2% of Full Scale
Standard unit: Barg
Optional: PSI / Kg / Pa
Standard process connetion: 1/4” NPT F or BSP F
Standard Diaghragm/O-ring: Buna N / Buna N
For wetted parts: more possibilities available,
see full catalogue
Please contact your local dealer and ask for the General Bulletin.
Or contact us directly!
www.beta-b.nl
Pressure
We reserve the right to make changes or modify the contents of this document without pior notice. BETA B.V. does not accept any liability or claim whatsoever for potential errors, incorrect interpretation or possible lack of information in this document. It is clearly and only intented as coarse and general information of our products.
Doc. no.: S
P 400/13/07/5K-(FC
)
Ranges for Pressure swiches
P 301 L
P 808 HP 908 HP 909 H
P 302 L
RANGE CODE ADJ. RANGEmBar/ Bar
1) Only available with L1 -microswitch element. K1 possible consult factory).
1) 1)
P 304 LP 306 L P 308 LP 402 MP 404 MP 406 MP 408 MP 502 HP 504 HP 506 HP 508 H
P 708 HP 706 H
2 - 15 mBar 10 - 100 mBar 20 - 240 mBar 20 - 560 mBar25 - 1300 mBar
150 - 5400 mBar
0.5 - 9.0 Bar 0.4 - 3.5 Bar 0.3 - 1.6 Bar
100 - 400 mBar100 - 950 mBar
120 - 2300 mBar
0.7 - 21.5 Bar2.5 - 32 Bar3.0 - 76 Bar
10 - 300 Bar4.0 - 170 Bar
10 - 350 Bar
8 - 94 InchWC4 - 39 InchWC
8 - 220 InchWC10 - 510 InchWC
1.5 - 5.8 PSI
1.7 - 33 PSI1.5 - 14 PSI
2.1 - 78 PSI4.4 - 23 PSI5.8 - 51 PSI
7.3 - 130 PSI
36 - 464 PSI 10 - 310 PSI
44 - 1100 PSI58 - 2500 PSI
150 - 4400 PSI 150 - 5100 PSI
0.8 - 6 InchWC
ADJ. RANGEPSI / Inch WC
ADJ. RANGEKpa/ MPa
ADJ. RANGEKg/cm2 / mmH2O
2 - 24 kPa1 - 10 kPa
2 - 56 kPa2.5 - 130 kPa10 - 40 kPa
12 - 230 kPa10 - 95 kPa
15 - 540 kPa0.03 - 0.16 MPa0.04 - 0.35 MPa0.05 - 0.9 MPa
0.25 - 3.2 MPa0.07 - 2.15 MPa
0.3 - 7.6 MPa0.4 - 17 MPa 1 - 30 MPa 1 - 35 MPa
0.2 - 1.5 kPa
200 - 2400 mmH2O100 - 1000 mmH2O
200 - 5600 mmH2O250 - 13000 mmH2O
0.1 - 0.41 Kg/cm2
0.12 - 2.3 Kg/cm20.1 - 0.97 Kg/cm2
0.15 - 5.45 Kg/cm20.3 - 1.60 Kg/cm20.4 - 3.5 Kg/cm20.5 - 9.2 Kg/cm2
2.5 - 33 Kg/cm20.7 - 22 Kg/cm2
3.1 - 77 Kg/cm24 - 170 Kg/cm2
10 - 310 Kg/cm210 - 360 Kg/cm2
20 - 150 mmH2O
SIL
Also available inSS 316
BETA SWITCHES ARE,BUILD TO LAST!
Enclosures:
Disclaimer:
BETA products are manufactured in The Netherlands
More Short Form Data Sheets on Vacuum, Differential and Temperature Switches are available.
Do you want to know more:
C-SeriesShort Form Data Sheet
Conduit Material Enclosure code
Pg13.5
Aluminium
C1
3/4” NPT F
Aluminium
C3
SS 316 C8
M20x1.5
1/2” NPT F
Aluminium
Aluminium
M20x1.5
C2
C4
1
2 Selection of range code, see front page
3
Aluminum only, std on P..L. - Not available on other ranges.
Above standard process connections are also available in:“BSP”For example: 1/2” BSP F (3316) = S2B
Process connections are also available in other materials like, Monel, PVC, Hastolley, Titanium etc.
Size
1/4”NPT F
1/2”NPT F
1/4”NPT F
1/2”NPT F
1/2”NPT M
Material
Aluminium
Aluminium
SS316
SS316
SS316
Code
A1N
A2N
S1N
S2N
S7N
4
Aluminium
CX
SS 316 CX
Selection of wetted parts
Diaphragm
Buna N
Viton
SS316
SS316
SS316
SS316
SS316
O-ring
Buna N
Viton
Buna N
Viton
Teflon
EPDM
Welded
Code
B1
V2
S1
S2
S4
S6
S0
1
3 4
5 6Making the modelcode: Follow steps 1 to 5
Selection of process connection.
Doc. no.: S
P 400/13/07/5K-(FC
)
Pressure
Other/ Specials
*
*
* WETTED PARTS ARE NOT GUARANTEED, against corrosion or permeation since processes vary from plant to plant and concentration of harmful fluids, gasses or solids vary from time to time in a given process. Empirical experience by users should be the final guide and alternate materials based on this are generally available. The diaphragm / O-Ring combinations are for process temperatures of -5°C to +90°C, unless otherwise indicated. For process temperatures beyond these limits please contact your BETA Switch Representative
*
*
Selection of enclosure type.
5 Selection of microswitches
6 Selection of options
Description Option code
Cable gland C
I
M
RatingUse: Switch
Code:VAC.
480/ 15A
480/ 10A
480/ 15A
250/ 0.1A
250/ 2A
1) For D.P.D.T action, second code figure schould be specifeid as “2” For example: K1 = S.P.D.T./ K2 = D.P.D.T
2) VDE certified acc. to DIN EN 61 058-1:1992+A1:1993.
3) Indicated ratings are for resistive DC load only.
** DC Rating not U.L. listed, although experience and third party testing confirm the D.C Voltage ratings. Consult your local BETA switch Representative.
VDC.
K128/ 0.5A Standard
28/ 0.5A Standaard for L-serie L1
125/ 0.5A Normal DC-service U1
30/ 0.1A O1
30/ 2AEnvironmental proof(IP 67)
N1
1)
2)
2)
125/ 1A 28/ 0.5A
250/ 0.1A 30/ 0.1A
For use in H2S environment and/or
for (EEx)i applications. G1
Y1
**
3)
3)
Intrinsically Safe Application(EEX i)
Vacuum Protection Plate
For extended selection and/ or specified technical information, please ask for the “BETA User Friendly” Catalogue.
Accessoires: 2” Pipe mount bracket set available.
Contents : 2 x bolts M6 x 100 mm + washer + nut Size +/- 1,5 mm / Material SS 304