Please select the page you would like to go to:
PCS CAL A Solution PCS - 600 PCS Calibrator Kit Solutions PCS - 600, CAL B, C, D
PCS Sample Range 221 - 222 Solutions PCS - 221, PCS - 222
PCS Sample Range 223 – 226 Solutions PCS - 223, PCS - 224, PCS - 225, PCS - 226 PCS Blank Solutions
PCS – 200, PCS – 211, PCS – 231, PCS – 232, PCS – 233, PCS -234, PCS – 235, PCS - 236
Safety Data Sheet
Revision Date: 15 Mar 2017
Page 1 of 5 17A6550D
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: PCS Instrument Calibrator Kit Solutions
Product number: PCS-600: PCS CAL A
Recommended Use: Calibration testing solution for use with the Artel PCS® Pipette Calibration System
Restrictions: Use only with the Artel PCS
Company: Artel, Inc.25 Bradley DriveWestbrook, Maine 04092-2013
Telephone: 207-854-0860888-406-3463 (toll-free)
Fax: 207-854-0867
Emergency Telephone: 3E Emergency Response (Account Number 13998)Inside USA/Canada: 855-212-6039Outside USA/Canada: 001-760-602-8703
2. HAZARDS IDENTIFICATION
Not hazardous as defined by OSHA 29 CFR 1910, subpart Z
HMIS ClassificationHealth hazard: 0Chronic Health Hazard: 0 Flammability: 0Physical hazards: 0
NFPA RatingHealth hazard: 0Fire: 0Reactivity Hazard: 0
Potential Health Effects
Inhalation None knownSkin None knownEyes None knownIngestion None known
Aggravated Medical None knownCondition
This product is a mixture of components and is not considered hazardous under the OSHA Hazard CommunicationStandard 29 CFR 1910.1200.
Not a dangerous substance or mixture according to the Globally Harmonized System (GHS)
The mixture has not been tested.
Hazards are determined using information supplied by the manufacturer of components, applying OSHA regulationsand applying best professional judgment.
Safety Data SheetRevision Date: 15 March 2017
Page 2 of 5 17A6550D
3. COMPOSITION / INFORMATION ON INGREDIENTS
Proprietary, aqueous based solution containing the components listed below.
Component CAS No. Concentration or Weight %Aqueous phthalate buffer None 0.1M2-Phenoxyethanol 122-99-6 0.2%EDTA 64-02-8 ≤ 0.12% Methyl 4-hydroxybenzoate 99-76-3 0.1%
Component Synonyms:Potassium hydrogen phthalateKHP
PhenoxyethanolEthylene glycol monophenyl etherPhenoxytolarosolDowanol EP / EPHEmery 6705Rose ether1-Hydroxy-2-phenoxyethaneβ-hydroxyethyl phenyl ether Phenyl cellosolve
Ethylenediaminetetraacetic acid
Methyl paraben;Methyl p-hydroxybenzoate;Methyl parahydroxybenzoate;Nipagin M;E number E218; Tegosept; Mycocten
4. FIRST AID MEASURES
General adviceThis product is non-hazardous. Consult a physician. Show this safety data sheet to the doctor in attendance. .
If inhaledN/A
In case of skin contactWash off with soap and water.
In case of eye contactImmediately flush with water for at least 15 minutes. Consult a physician.
If swallowedIf patient is conscious, induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth withwater. Consult a physician.
Most important symptoms/effects, acute and delayed:None determined
5. FIRE FIGHTING MEASURES
Suitable extinguishing mediaN/A. This is a nonflammable material.
Special protective equipment for firefightersN/A. This is a nonflammable material.
Hazardous combustion productsNone known.
Further informationNone known.
Page 3 of 5 17A6550D
6. ACCIDENTAL RELEASE MEASURES
Personal precautionsNo special practices required.
Environmental precautionsNone known.
Methods and materials for containment and cleaning upContain spillage, collect as much as possible and dispose of remainder in accordance with local, state or federalregulations.
7. HANDLING AND STORAGE
Precautions for safe handlingNo requirements other than good hygiene and safety practices employed with any laboratory reagents.
Conditions for safe storageStore between 15-30 °C. Prevent spillage or breakage.
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Components with workplace control parameters
Personal protective equipment
Respiratory protectionNot required.
Hand protectionImpervious gloves useful but not required.
Eye protectionNot required.
Skin and body protectionLab coat to protect clothing and minimize skin contact.
Hygiene measuresNo requirements other than good hygiene and safety practices employed with any other lab reagents.
9. PHYSICAL AND CHEMICAL PROPERTIES
AppearanceForm liquidColor colorless, clear
Safety dataThe following data are available from the manufacturer of the components, and are not data generated for themixture. The component for which the information is known is given below, along with a clarification as to whichcomponent the information comes from. If no specification is given, then the data pertains to the mixture.
pH 6.00 ±0.07Melting/ freezing point 0 °CBoiling point 100 °CFlash point N/AIgnition temperature N/AAuto ignition temperature N/ALower explosion limit N/AUpper explosion limit N/AVapor pressure 17.6 mmHgDensity 1.0 g/cm3
Water solubility completePartition coefficient, n-octanol/water no data available, N/ARelative vapor density no data available
Page 3 of 5 17A6550D
6. ACCIDENTAL RELEASE MEASURES
Personal precautionsNo special practices required.
Environmental precautionsNone known.
Methods and materials for containment and cleaning upContain spillage, collect as much as possible and dispose of remainder in accordance with local, state or federalregulations.
7. HANDLING AND STORAGE
Precautions for safe handlingNo requirements other than good hygiene and safety practices employed with any laboratory reagents.
Conditions for safe storageStore between 15-30 °C. Prevent spillage or breakage.
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Components with workplace control parameters
Personal protective equipment
Respiratory protectionNot required.
Hand protectionImpervious gloves useful but not required.
Eye protectionNot required.
Skin and body protectionLab coat to protect clothing and minimize skin contact.
Hygiene measuresNo requirements other than good hygiene and safety practices employed with any other lab reagents.
9. PHYSICAL AND CHEMICAL PROPERTIES
AppearanceForm liquidColor colorless, clear
Safety dataThe following data are available from the manufacturer of the components, and are not data generated for themixture. The component for which the information is known is given below, along with a clarification as to whichcomponent the information comes from. If no specification is given, then the data pertains to the mixture.
pH 6.00 ±0.07Melting/ freezing point 0 °CBoiling point 100 °CFlash point N/AIgnition temperature N/AAuto ignition temperature N/ALower explosion limit N/AUpper explosion limit N/AVapor pressure 17.6 mmHgDensity 1.0 g/cm3
Water solubility completePartition coefficient, n-octanol/water no data available, N/ARelative vapor density no data available
Page 4 of 5 17A6550D
Odor odorlessOdor Threshold no data available, N/AEvaporation rate (butyl acetate = 1) 0.3Decomposition temperature no data available, N/AViscosity 1 cP
10. STABILITY AND REACTIVITY
Reactivity and Chemical stabilityStable.
Possibility of hazardous reactionsNo data available, N/A.
Conditions to avoidAvoid contact with clothing, may cause staining.
Materials to avoidNo data available, N/A.
Hazardous decomposition productsNo data available, N/A.
11. TOXICOLOGICAL INFORMATION
Acute toxicityno data available
IARC: No component of this product present at levels greater than or equal to 0.1% is identifiedas probable, possible or confirmed human carcinogen by IARC.
ACGIH: No component of this product present at levels greater than or equal to 0.1% is identifiedas a carcinogen or potential carcinogen by ACGIH.
NTP: No component of this product present at levels greater than or equal to 0.1% is identifiedas a known or anticipated carcinogen by NTP.
OSHA: No component of this product present at levels greater than or equal to 0.1% is identifiedas a carcinogen or potential carcinogen by OSHA.
12. ECOLOGICAL INFORMATION
No relevant studies identified.
13. DISPOSAL CONSIDERATIONS
ProductNot an RCRA hazardous waste as supplied. Observe all federal, state, and local waste disposal laws. State andlocal regulations may differ from federal regulations. Always comply with local disposal regulations.
14. TRANSPORT INFORMATION
DOT (US)Not classified.
IMDGNot classified.
IATANot classified.
No special precautions required.
Page 5 of 5 17A6550D
15. REGULATORY INFORMATION
The following regulatory information is believed accurate as of the date of this SDS. Check allapplicable laws for possible changes.
OSHA HazardsNot hazardous as defined by OSHA 29 CFR 1910, subpart Z
SARA 302 ComponentsSARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 ComponentsSARA 313: This material does not contain any chemical components with known CAS numbers that exceed thethreshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 HazardsNone known
Massachusetts Right To Know ComponentsNo components are subject to the Massachusetts Right to Know Act.
Pennsylvania Right To Know ComponentsNo components are subject to the Pennsylvania Right to Know Act.
New Jersey Right To Know ComponentsNo components are subject to the New Jersey Right to Know Act.
California Prop. 65 ComponentsThis product does not contain any chemicals known to State of California to cause cancer, birth defects, or anyother reproductive harm.
16. OTHER INFORMATION
Revision Date: 15 March 2017
DisclaimerAll chemicals may pose unknown hazards and should be used with caution. This Safety Data Sheet (SDS)applies only to the material as packaged. If this product is combined with other materials, deteriorates, orbecomes contaminated, it may pose hazards not mentioned in this SDS. The physical properties reported in thisSDS are consistent with the information provided to Artel, by the manufacturer of the components of the mixture,except as stated otherwise, and are believed to be accurate and should be used as a guide only. No warranty orguarantee is expressed or implied with respect to the information provided. Artel, Inc. assumes no responsibilityas a result of incidental or consequential damages, including lost profits, arising from the use of this data. Nowarranty against infringement of any patents, copyright or trademark is made or implied. It shall be the user’sresponsibility to develop proper methods of handling and personal protection based on the actual conditions ofuse. While this SDS is based on technical data judged to be reliable, Artel assumes no responsibility for thecompleteness or accuracy of the information contained herein.
Page 1 of 6 17A3595K
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: PCS Instrument Calibrator Kit Solutions
Product number: PCS-600: CAL B, CAL C, CAL D
Recommended Use: Calibration testing solution for use with the Artel PCS® Pipette Calibration System
Restrictions: Use only with the Artel PCS
Company: Artel, Inc.25 Bradley DriveWestbrook, Maine 04092-2013
Telephone: 207-854-0860888-406-3463 (toll-free)
Fax: 207-854-0867
Emergency Telephone: 3E Emergency Response (Account Number 13998)Inside USA/Canada: 855-212-6039Outside USA/Canada: 001-760-602-8703
2. HAZARDS IDENTIFICATION
Not hazardous as defined by OSHA 29 CFR 1910, subpart Z
HMIS ClassificationHealth hazard: 0Chronic Health Hazard: 0 Flammability: 0Physical hazards: 0
NFPA RatingHealth hazard: 0Fire: 0Reactivity Hazard: 0
Potential Health Effects
Inhalation None knownSkin None knownEyes None knownIngestion None known
Aggravated Medical None knownCondition
This product is a mixture of components and is not considered hazardous under the OSHA Hazard CommunicationStandard 29 CFR 1910.1200.
Not a dangerous substance or mixture according to the Globally Harmonized System (GHS)
The mixture has not been tested.
Hazards are determined using information supplied by the manufacturer of components, applying OSHA regulationsand applying best professional judgment.
Safety Data SheetRevision Date: 15 March 2017
Page 2 of 6 17A3595K
3. COMPOSITION / INFORMATION ON INGREDIENTS
Proprietary, aqueous based solution containing the components listed below.
Component CAS No. Concentration or Weight %
Aqueous phthalate buffer None 0.1MEDTA 64-02-8 0.5%Copper (II) chloride dihydrate 10125-13-0 0.15%2-Phenoxyethanol 122-99-6 0.2%Methyl 4-hydroxybenzoate 99-76-3 0.1%Ponceau S (Acid Red 112) 6226-79-5 ≤ 0.002%
Component Synonyms:
Potassium hydrogen phthalateKHP
Ethylenediaminetetraacetic acid
2-PhenoxyethanolEthylene glycol monophenyl ether2-PhenoxytolarosolDowanol EP / EPHEmery 6705Rose ether1-Hydroxy-2-phenoxyethaneβ-hydroxyethyl phenyl ether Phenyl cellosolve
Methyl paraben;Methyl-p-hydroxybenzoate;Methyl-para-hydroxybenzoate;Nipagin M;E number E218; Tegosept; Mycocten
Ponceau SAcid Red 1123-Hydroxy-4-(2-sulfo-4-[4-sulfophenylazo]phenylazo)-2,7-naphthalenedisulfonic acid sodium saltTetrasodium 3-hydroxy-4-(2-sulphonato-4-(4-sulphonatophenylazo)phenylazo)naphthalene-2,7-disulphonate
4. FIRST AID MEASURES
General adviceThis product is non-hazardous. Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaledN/A
In case of skin contactWash off with soap and water.
In case of eye contactImmediately flush with water for at least 15 minutes. Consult a physician.
If swallowedIf patient is conscious, induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth withwater. Consult a physician.
Most important symptoms/effects, acute and delayed:None determined.
Page 3 of 6 17A3595K
5. FIRE FIGHTING MEASURES
Suitable extinguishing mediaN/A. This is a nonflammable material.
Special protective equipment for firefightersN/A. This is a nonflammable material.
Hazardous combustion productsNone known.
Further informationNone known.
6. ACCIDENTAL RELEASE MEASURES
Personal precautionsNo special practices required.
Environmental precautionsNone known.
Methods and materials for containment and cleaning upContain spillage, collect as much as possible and dispose of remainder in accordance with local, state or federalregulations.
7. HANDLING AND STORAGE
Precautions for safe handlingNo requirements other than good hygiene and safety practices employed with any laboratory reagents.
Conditions for safe storageStore between 15-30 °C. Prevent spillage or breakage.
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Components with workplace control parameters
Personal protective equipmentRespiratory protectionNot required.
Hand protectionImpervious gloves useful but not required.
Eye protectionNot required.
Skin and body protectionLab coat to protect clothing and minimize skin contact.
Hygiene measuresNo requirements other than good hygiene and safety practices employed with any other lab reagents.
Page 4 of 6 17A3595K
9. PHYSICAL AND CHEMICAL PROPERTIES
AppearanceForm liquidColor pink, red, purple
Safety dataThe following data are available from the manufacturer of the components, and are not data generated for themixture. The component for which the information is known is given below, along with a clarification as to whichcomponent the information comes from. If no specification is given, then the data pertains to the mixture.
pH 6.00 ±0.07Melting/ freezing point 0 °CBoiling point 100 °CFlash point N/AIgnition temperature N/AAuto ignition temperature N/ALower explosion limit N/AUpper explosion limit N/AVapor pressure 17.6 mmHgDensity 1.0 g/cm3
Water solubility completePartition coefficient, n-octanol/water no data available, N/ARelative vapor density no data availableOdor odorlessOdor Threshold no data available, N/AEvaporation rate (butyl acetate = 1) 0.3Decomposition temperature no data available, N/AViscosity 1 cP
10. STABILITY AND REACTIVITY
Reactivity and Chemical stabilityStable.
Possibility of hazardous reactionsNo data available, N/A.
Conditions to avoidAvoid contact with clothing, may cause staining.
Materials to avoidNo data available, N/A.
Hazardous decomposition productsNo data available, N/A.
11. TOXICOLOGICAL INFORMATION
Acute toxicityno data available
IARC: No component of this product present at levels greater than or equal to 0.1% is identifiedas probable, possible or confirmed human carcinogen by IARC.
ACGIH: No component of this product present at levels greater than or equal to 0.1% is identifiedas a carcinogen or potential carcinogen by ACGIH.
NTP: No component of this product present at levels greater than or equal to 0.1% is identifiedas a known or anticipated carcinogen by NTP.
OSHA: No component of this product present at levels greater than or equal to 0.1% is identifiedas a carcinogen or potential carcinogen by OSHA.
Page 5 of 6 17A3595K
12. ECOLOGICAL INFORMATION
No relevant studies identified.
13. DISPOSAL CONSIDERATIONS
ProductNot an RCRA hazardous waste as supplied. Observe all federal, state, and local waste disposal laws. State andlocal regulations may differ from federal regulations. Always comply with local disposal regulations.
14. TRANSPORT INFORMATION
DOT (US)Not classified.
IMDGNot classified.
IATANot classified.
No special precautions required.
15. REGULATORY INFORMATION
The following regulatory information is believed accurate as of the date of this SDS. Check allapplicable laws for possible changes.
OSHA HazardsNot hazardous as defined by OSHA 29 CFR 1910, subpart Z.
SARA 302 ComponentsSARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 ComponentsSARA 313: This material does not contain any chemical components with known CAS numbers that exceed thethreshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 HazardsNone known.
Massachusetts Right To Know ComponentsNo components are subject to the Massachusetts Right to Know Act.
Pennsylvania Right To Know ComponentsNo components are subject to the Pennsylvania Right to Know Act.
New Jersey Right To Know ComponentsNo components are subject to the New Jersey Right to Know Act.
California Prop. 65 ComponentsThis product does not contain any chemicals known to State of California to cause cancer, birth defects, or anyother reproductive harm.
Page 6 of 6 17A3595K
16. OTHER INFORMATION
Revision Date: 15 March 2017
DisclaimerAll chemicals may pose unknown hazards and should be used with caution. This Safety Data Sheet (SDS) appliesonly to the material as packaged. If this product is combined with other materials, deteriorates, or becomescontaminated, it may pose hazards not mentioned in this SDS. The physical properties reported in this SDS areconsistent with the information provided to Artel, by the manufacturer of the components of the mixture, except asstated otherwise, and are believed to be accurate and should be used as a guide only. No warranty or guarantee isexpressed or implied with respect to the information provided. Artel, Inc. assumes no responsibility as a result ofincidental or consequential damages, including lost profits, arising from the use of this data. No warranty againstinfringement of any patents, copyright or trademark is made or implied. It shall be the user’s responsibility todevelop proper methods of handling and personal protection based on the actual conditions of use. While this SDSis based on technical data judged to be reliable, Artel assumes no responsibility for the completeness or accuracyof the information contained herein.
Page 1 of 5 17A6734C
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: PCS Range 1 and 2 Sample Solutions
Product number: PCS-221, PCS-222
Recommended Use: Calibration testing solution for use with the Artel PCS®
Restrictions: Use only with the Artel PCS
Company: Artel, Inc.25 Bradley DriveWestbrook, Maine 04092-2013
Telephone: 207-854-0860888-406-3463 (toll-free)
Fax: 207-854-0867
Emergency Telephone: 3E Emergency Response (Account Number 13998)Inside USA/Canada: 855-212-6039Outside USA/Canada: 001-760-602-8703
2. HAZARDS IDENTIFICATION
Not hazardous as defined by OSHA 29 CFR 1910, subpart Z
HMIS ClassificationHealth hazard: 0Chronic Health Hazard: 0 Flammability: 0Physical hazards: 0
NFPA RatingHealth hazard: 0Fire: 0Reactivity Hazard: 0
Potential Health Effects
Inhalation None knownSkin None knownEyes None knownIngestion None known
Aggravated Medical None knownCondition
This product is a mixture of components and is not considered hazardous under the OSHA Hazard CommunicationStandard 29 CFR 1910.1200.
Not a dangerous substance or mixture according to the Globally Harmonized System (GHS)
The mixture has not been tested.
Hazards are determined using information supplied by the manufacturer of components, applying OSHA regulationsand applying best professional judgment.
Safety Data SheetRevision Date: 15 March 2017
Page 2 of 5 17A6734C
3. COMPOSITION / INFORMATION ON INGREDIENTS
Proprietary, aqueous based solution containing the following:
Aqueous phthalate buffer None ≤ 0.02M 2-Phenoxyethanol 122-99-6 0.2%Methyl 4-hydroxybenzoate 99-76-3 0.1%EDTA 64-02-8 ≤ 0.1% Ponceau S (Acid Red 112) 6226-79-5 < 0.01%
Component Synonyms:Potassium hydrogen phthalateKHP
PhenoxyethanolEthylene glycol monophenyl etherPhenoxytolarosolDowanol EP / EPHEmery 6705Rose ether1-Hydroxy-2-phenoxyethaneβ-hydroxyethyl phenyl ether Phenyl cellosolve
Methyl paraben;Methyl p-hydroxybenzoate;Methyl parahydroxybenzoate;Nipagin M;E number E218; Tegosept; Mycocten
Ethylenediaminetetraacetic acid
Ponceau SAcid Red 1123-Hydroxy-4-(2-sulfo-4-[4-sulfophenylazo]phenylazo)-2,7-naphthalenedisulfonic acid sodium saltTetrasodium 3-hydroxy-4-(2-sulphonato-4-(4-sulphonatophenylazo)phenylazo)naphthalene-2,7-disulphonate
4. FIRST AID MEASURES
General adviceThis product is non-hazardous. Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaledN/A. This is a liquid.
In case of skin contactWash off with soap and water.
In case of eye contactImmediately flush with water for at least 15 minutes. Consult a physician.
If swallowedIf patient is conscious, induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth withwater. Consult a physician.
Most important symptoms/effects, acute and delayed:None determined
5. FIRE FIGHTING MEASURES
Suitable extinguishing mediaN/A. This is a nonflammable material.
Page 3 of 5 17A6734C
Special protective equipment for firefightersN/A. This is a nonflammable material.
Hazardous combustion productsNone known.
Further informationNone known.
6. ACCIDENTAL RELEASE MEASURES
Personal precautionsNo special practices required.
Environmental precautionsNone known.
Methods and materials for containment and cleaning upContain spillage, collect as much as possible and dispose of remainder in accordance with local, state or federalregulations.
7. HANDLING AND STORAGE
Precautions for safe handlingNo requirements other than good hygiene and safety practices employed with any laboratory reagents.
Conditions for safe storageStore between 15-30 °C. Prevent spillage or breakage.
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Components with workplace control parameters
Personal protective equipmentRespiratory protectionNot required.
Hand protectionImpervious gloves useful but not required.
Eye protectionNot required.
Skin and body protectionLab coat to protect clothing and minimize skin contact.
Hygiene measuresNo requirements other than good hygiene and safety practices employed with any other lab reagents.
9. PHYSICAL AND CHEMICAL PROPERTIES
AppearanceForm liquidColor red, deep red, purple
Safety dataThe following data are available from the manufacturer of the components, and are not data generated for themixture. The component for which the information is known is given below, along with a clarification as to whichcomponent the information comes from. If no specification is given, then the data pertains to the mixture.
pH 6.00 ±0.07Melting/ freezing point 0 °CBoiling point 100 °CFlash point N/AIgnition temperature N/A
Page 4 of 5 17A6734C
Auto ignition temperature N/ALower explosion limit N/AUpper explosion limit N/AVapor pressure 17.6 mmHgDensity 1.0 g/cm3
Water solubility completePartition coefficient, n-octanol/water no data available, N/A.Relative vapor density no data availableOdor odorlessOdor Threshold no data available, N/A.Evaporation rate (butyl acetate = 1) 0.3Decomposition temperature no data available, N/A.Viscosity 1 cP
10. STABILITY AND REACTIVITY
Reactivity and Chemical stabilityStable.
Possibility of hazardous reactionsNo data available, N/A.
Conditions to avoidAvoid contact with clothing, may cause staining.
Materials to avoidNo data available, N/A.
Hazardous decomposition productsNo data available, N/A.
11. TOXICOLOGICAL INFORMATION
Acute toxicityno data available
IARC: No component of this product present at levels greater than or equal to 0.1% is identified asprobable, possible or confirmed human carcinogen by IARC.
ACGIH: No component of this product present at levels greater than or equal to 0.1% is identified as acarcinogen or potential carcinogen by ACGIH.
NTP: No component of this product present at levels greater than or equal to 0.1% is identified as aknown or anticipated carcinogen by NTP.
OSHA: No component of this product present at levels greater than or equal to 0.1% is identified as acarcinogen or potential carcinogen by OSHA.
12. ECOLOGICAL INFORMATION
No relevant studies identified
13. DISPOSAL CONSIDERATIONS
ProductNot an RCRA hazardous waste as supplied. Observe all federal, state, and local waste disposal laws. State andlocal regulations may differ from federal regulations. Always comply with local disposal regulations.
14. TRANSPORT INFORMATION
DOT (US)Not classified.
Page 5 of 5 17A6734C
IMDGNot classified.
IATANot classified.
No special precautions required.
15. REGULATORY INFORMATION
The following regulatory information is believed accurate as of the date of this SDS. Check allapplicable laws for possible changes.
OSHA HazardsNot hazardous as defined by OSHA 29 CFR 1910, subpart Z
SARA 302 ComponentsSARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 ComponentsSARA 313: This material does not contain any chemical components with known CAS numbers that exceed thethreshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 HazardsNone known
Massachusetts Right To Know ComponentsNo components are subject to the Massachusetts Right to Know Act.
Pennsylvania Right To Know ComponentsNo components are subject to the Pennsylvania Right to Know Act.
New Jersey Right To Know ComponentsNo components are subject to the New Jersey Right to Know Act.
California Prop. 65 ComponentsThis product does not contain any chemicals known to State of California to cause cancer, birth defects, or anyother reproductive harm.
16. OTHER INFORMATION
Revision Date: 15 March 2017
DisclaimerAll chemicals may pose unknown hazards and should be used with caution. This Safety Data Sheet (SDS)applies only to the material as packaged. If this product is combined with other materials, deteriorates, orbecomes contaminated, it may pose hazards not mentioned in this SDS. The physical properties reported in thisSDS are consistent with the information provided to Artel, by the manufacturer of the components of the mixture,except as stated otherwise, and are believed to be accurate and should be used as a guide only. No warranty orguarantee is expressed or implied with respect to the information provided. Artel, Inc. assumes no responsibilityas a result of incidental or consequential damages, including lost profits, arising from the use of this data. Nowarranty against infringement of any patents, copyright or trademark is made or implied. It shall be the user’sresponsibility to develop proper methods of handling and personal protection based on the actual conditions ofuse. While this SDS is based on technical data judged to be reliable, Artel assumes no responsibility for thecompleteness or accuracy of the information contained herein.
Page 1 of 5 17A3596J
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: PCS Ranges 3 thru 6 Sample Solutions Product number: PCS-223, PCS-224, PCS-225, PCS-226 Recommended Use: Calibration testing solution for use with the Artel PCS® Pipette Calibration System
Restrictions: Use only with the Artel PCS
Company: Artel, Inc. 25 Bradley Drive Westbrook, Maine 04092-2013 Telephone: 207-854-0860 888-406-3463 (toll-free) Fax: 207-854-0867
Emergency Telephone: 3E Emergency Response (Account Number 13998) Inside USA/Canada: 855-212-6039 Outside USA/Canada: 001-760-602-8703
2. HAZARDS IDENTIFICATION
Not hazardous as defined by OSHA 29 CFR 1910, subpart Z HMIS Classification
Health hazard: 0 Chronic Health Hazard: 0 Flammability: 0 Physical hazards: 0
NFPA Rating Health hazard: 0 Fire: 0 Reactivity Hazard: 0
Potential Health Effects
Inhalation None known Skin None known Eyes None known Ingestion None known
Aggravated Medical None known Condition This product is a mixture of components and is not considered hazardous under the OSHA Hazard Communication Standard 29 CFR 1910.1200.
Not a dangerous substance or mixture according to the Globally Harmonized System (GHS)
The mixture has not been tested.
Hazards are determined using information supplied by the manufacturer of components, applying OSHA regulations and applying best professional judgment.
Safety Data Sheet
Revision Date: 15 March 2017
Page 2 of 5 17A3596J
3. COMPOSITION / INFORMATION ON INGREDIENTS
Proprietary, aqueous based solution containing the following:
Component CAS No. Concentration or Weight %
Aqueous phthalate buffer None 0.02M Ponceau S (Acid Red 112) 6226-79-5 < 1.6% 5-chloro-2-methyl-4-isothiazolin-3-one 26172-55-4 < 0.001% 2-methyl-2H-isothiazol-3-one 2682-20-4 < 0.001%
Component Synonyms: Potassium hydrogen phthalate KHP
Ponceau S Acid Red 112 3-Hydroxy-4-(2-sulfo-4-[4-sulfophenylazo]phenylazo)-2,7-naphthalenedisulfonic acid sodium salt
Tetrasodium 3-hydroxy-4-(2-sulphonato-4-(4-sulphonatophenylazo)phenylazo)naphthalene-2,7-disulphonate
MIT MI methylisothiazolinone 2-Methyl-1,2-thiazol-3(2H)-one 2-methylisothiazol-3(2H)-one 2-methyl-4-isothiazolin-3-one CMIT CMI MCI MCIT 5-Chloro-2-methyl-1,2-thiazol-3(2H)-oneAcid Red 112 5-Chloro-2-methylisothiazol-3(2H)-one 5-Chloro-2-methyl-4-isothiazolin-3-one Chloromethylisothiazolinone Chloromethylisothiazolone Methylchloroisothiazolinone Methylchloroisothiazolone
4. FIRST AID MEASURES
General advice This product is non-hazardous. Consult a physician. Show this safety data sheet to the doctor in attendance. Move out of dangerous area.
If inhaled N/A. This material is a liquid.
In case of skin contact Wash off with soap and water.
In case of eye contact Immediately flush with water for at least 15 minutes. Consult a physician.
If swallowed If patient is conscious, induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms/effects, acute and delayed: None determined
Page 3 of 5 17A3596J
5. FIRE FIGHTING MEASURES
Suitable extinguishing media N/A. This is a nonflammable material.
Special protective equipment for firefighters N/A. This is a nonflammable material.
Hazardous combustion products None known.
Further information None known.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions No special practices required.
Environmental precautions None known.
Methods and materials for containment and cleaning up Contain spillage, collect as much as possible and dispose of remainder in accordance with local, state or federal regulations.
7. HANDLING AND STORAGE
Precautions for safe handling No requirements other than good hygiene and safety practices employed with any laboratory reagents.
Conditions for safe storage Store between 15-30 °C. Prevent spillage or breakage.
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Components with workplace control parameters
Personal protective equipment Respiratory protection Not required.
Hand protection Impervious gloves useful but not required.
Eye protection Not required.
Skin and body protection Lab coat to protect clothing and minimize skin contact.
Hygiene measures No requirements other than good hygiene and safety practices employed with any other lab reagents.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance Form liquid,
Color red, dark red, purple
Page 4 of 5 17A3596J
Safety data The following data are available from the manufacturer of the components, and are not data generated for the mixture. The component for which the information is known is given below, along with a clarification as to which component the information comes from. If no specification is given, then the data pertains to the mixture.
pH 6.00 ±0.07 Melting/ freezing point 0 °C Boiling point 100 °C Flash point N/A Ignition temperature N/A
Auto ignition temperature N/A Lower explosion limit N/A Upper explosion limit N/A Vapor pressure 17.6 mmHg Density 1.0 g/cm3
Water solubility complete Partition coefficient, n-octanol/water no data available, N/A. Relative vapor density no data available Odor odorless Odor Threshold no data available, N/A. Evaporation rate (butyl acetate = 1) 0.3
Decomposition temperature no data available, N/A. Viscosity 1 cP
10. STABILITY AND REACTIVITY
Reactivity and Chemical stability Stable.
Possibility of hazardous reactions No data available, N/A.
Conditions to avoid Avoid contact with clothing, may cause staining.
Materials to avoid No data available, N/A.
Hazardous decomposition products No data available, N/A.
11. TOXICOLOGICAL INFORMATION
Acute toxicity no data available
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
ACGIH: No component of this product present at levels greater than or equal to 0.1% is identified as a
carcinogen or potential carcinogen by ACGIH. NTP: No component of this product present at levels greater than or equal to 0.1% is identified as a
known or anticipated carcinogen by NTP. OSHA: No component of this product present at levels greater than or equal to 0.1% is identified as a
carcinogen or potential carcinogen by OSHA.
12. ECOLOGICAL INFORMATION
No relevant studies identified
Page 5 of 5 17A3596J
13. DISPOSAL CONSIDERATIONS
Product Not an RCRA hazardous waste as supplied. Observe all federal, state, and local waste disposal laws. State and local regulations may differ from federal regulations. Always comply with local disposal regulations.
14. TRANSPORT INFORMATION
DOT (US) Not classified.
IMDG Not classified.
IATA Not classified.
No special precautions required.
15. REGULATORY INFORMATION
The following regulatory information is believed accurate as of the date of this SDS. Check all applicable laws for possible changes.
OSHA Hazards Not hazardous as defined by OSHA 29 CFR 1910, subpart Z
SARA 302 Components SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards None known
Massachusetts Right To Know Components No components are subject to the Massachusetts Right to Know Act.
Pennsylvania Right To Know Components No components are subject to the Pennsylvania Right to Know Act.
New Jersey Right To Know Components No components are subject to the New Jersey Right to Know Act.
California Prop. 65 Components This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
16. OTHER INFORMATION
Revision Date: 15 March 2017 Disclaimer All chemicals may pose unknown hazards and should be used with caution. This Safety Data Sheet (SDS) applies only to the material as packaged. If this product is combined with other materials, deteriorates, or becomes contaminated, it may pose hazards not mentioned in this SDS. The physical properties reported in this SDS are consistent with the information provided to Artel, by the manufacturer of the components of the mixture, except as stated otherwise, and are believed to be accurate and should be used as a guide only. No warranty or guarantee is expressed or implied with respect to the information provided. Artel, Inc. assumes no responsibility as a result of incidental or consequential damages, including lost profits, arising from the use of this data. No warranty against infringement of any patents, copyright or trademark is made or implied. It shall be the user’s responsibility to develop proper methods of handling and personal protection based on the actual conditions of use. While this SDS is based on technical data judged to be reliable, Artel assumes no responsibility for the completeness or accuracy of the information contained herein.
Page 1 of 5 17A3597K
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: PCS Blank Solution
Product number: PCS-200, PCS-211, and PCS-231 thru PCS-236
Recommended Use: Calibration testing solution for use with the Artel PCS® Pipette Calibration System
Restrictions: Use only with the Artel PCS
Company: Artel, Inc.25 Bradley DriveWestbrook, Maine 04092-2013
Telephone: 207-854-0860888-406-3463 (toll-free)
Fax: 207-854-0867
Emergency Telephone: 3E Emergency Response (Account Number 13998)Inside USA/Canada: 855-212-6039Outside USA/Canada: 001-760-602-8703
2. HAZARDS IDENTIFICATION
Not hazardous as defined by OSHA 29 CFR 1910, subpart Z
HMIS ClassificationHealth hazard: 0Chronic Health Hazard: 0 Flammability: 0Physical hazards: 0
NFPA RatingHealth hazard: 0Fire: 0Reactivity Hazard: 0
Potential Health Effects
Inhalation None knownSkin None knownEyes None knownIngestion None known
Aggravated Medical None knownCondition
This product is a mixture of components and is not considered hazardous under the OSHA Hazard CommunicationStandard 29 CFR 1910.1200.
Not a dangerous substance or mixture according to the Globally Harmonized System (GHS)
The mixture has not been tested.
Hazards are determined using information supplied by the manufacturer of components, applying OSHA regulationsand applying best professional judgment.
Safety Data SheetRevision Date: 15 March 2017
Page 2 of 5 17A3597K
3. COMPOSITION / INFORMATION ON INGREDIENTS
Proprietary, aqueous based solution containing the following:
Component CAS No. Concentration or Weight %
Aqueous phthalate buffer None 0.02MPoly(ethylene glycol) 25322-68-3 10%EDTA 64-02-8 0.4%2-Phenoxyethanol 122-99-6 0.2%Copper (II) chloride dihydrate 10125-13-0 0.1%Methyl 4-hydroxybenzoate 99-76-3 0.1%
Component Synonyms:Potassium hydrogen phthalateKHP
Potassium hydrogen phthalateKHP
PEGCarbowax
Ethylenediaminetetraacetic acid
PhenoxyethanolEthylene glycol monophenyl etherPhenoxytolarosolDowanol EP / EPHEmery 6705Rose ether1-Hydroxy-2-phenoxyethaneβ-hydroxyethyl phenyl ether Phenyl cellosolve
Methyl paraben;Methyl p-hydroxybenzoate;Methyl parahydroxybenzoate;Nipagin M;E number E218; Tegosept; Mycocten
4. FIRST AID MEASURES
General adviceThis product is non-hazardous. Consult a physician. Show this safety data sheet to the doctor in attendance. Moveout of dangerous area.
If inhaledN/A. This material is a liquid.
In case of skin contactWash off with soap and water.
In case of eye contactImmediately flush with water for at least 15 minutes. Consult a physician.
If swallowedIf patient is conscious, induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth withwater. Consult a physician.
Most important symptoms/effects, acute and delayed:None determined.
Page 3 of 5 17A3597K
5. FIRE FIGHTING MEASURES
Suitable extinguishing mediaN/A. This is a nonflammable material.
Special protective equipment for firefightersN/A. This is a nonflammable material.
Hazardous combustion productsNone known.
Further informationNone known.
6. ACCIDENTAL RELEASE MEASURES
Personal precautionsNo special practices required.
Environmental precautionsNone known.
Methods and materials for containment and cleaning upContain spillage, collect as much as possible and dispose of remainder in accordance with local, state or federalregulations.
7. HANDLING AND STORAGE
Precautions for safe handlingNo requirements other than good hygiene and safety practices employed with any laboratory reagents.
Conditions for safe storageStore between 15-30 °C. Prevent spillage or breakage.
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Components with workplace control parameters
Personal protective equipmentRespiratory protectionNot required.
Hand protectionImpervious gloves useful but not required.
Eye protectionNot required.
Skin and body protectionLab coat to protect clothing and minimize skin contact.
Hygiene measuresNo requirements other than good hygiene and safety practices employed with any other lab reagents.
Page 4 of 5 17A3597K
9. PHYSICAL AND CHEMICAL PROPERTIES
AppearanceForm liquidColor light blue, clear
Safety dataThe following data are available from the manufacturer of the components, and are not data generated for themixture. The component for which the information is known is given below, along with a clarification as to whichcomponent the information comes from. If no specification is given, then the data pertains to the mixture.
pH 6.00 ±0.07Melting/ freezing point 0 °CBoiling point 100 °CFlash point N/AIgnition temperature N/AAuto ignition temperature N/ALower explosion limit N/AUpper explosion limit N/AVapor pressure 17.6 mmHgDensity 1.0 g/cm3
Water solubility completePartition coefficient, n-octanol/water no data available, N/A.Relative vapor density no data available, N/A.Odor odorlessOdor Threshold no data available, N/A.Evaporation rate (butyl acetate = 1) 0.3Decomposition temperature no data available, N/A.Viscosity 1 cP
10. STABILITY AND REACTIVITY
Reactivity and Chemical stabilityStable
Possibility of hazardous reactionsNo data available, N/A.
Conditions to avoidAvoid contact with clothing, may cause staining.
Materials to avoidNo data available, N/A.
Hazardous decomposition productsNo data available, N/A.
11. TOXICOLOGICAL INFORMATION
Acute toxicityno data available
IARC: No component of this product present at levels greater than or equal to 0.1% is identifiedas probable, possible or confirmed human carcinogen by IARC.
ACGIH: No component of this product present at levels greater than or equal to 0.1% is identifiedas a carcinogen or potential carcinogen by ACGIH.
NTP: No component of this product present at levels greater than or equal to 0.1% is identifiedas a known or anticipated carcinogen by NTP.
OSHA: No component of this product present at levels greater than or equal to 0.1% is identifiedas a carcinogen or potential carcinogen by OSHA.
Page 5 of 5 17A3597K
12. ECOLOGICAL INFORMATION
No relevant studies identified
13. DISPOSAL CONSIDERATIONS
ProductNot an RCRA hazardous waste as supplied. Observe all federal, state, and local waste disposal laws. State andlocal regulations may differ from federal regulations. Always comply with local disposal regulations.
14. TRANSPORT INFORMATION
DOT (US)Not classified
IMDGNot classified
IATANot classified
No special precautions required.
15. REGULATORY INFORMATION
The following regulatory information is believed accurate as of the date of this SDS. Check allapplicable laws for possible changes.
OSHA HazardsNot hazardous as defined by OSHA 29 CFR 1910, subpart Z
SARA 302 ComponentsSARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 ComponentsSARA 313: This material does not contain any chemical components with known CAS numbers that exceed thethreshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 HazardsNone known
Massachusetts Right To Know ComponentsNo components are subject to the Massachusetts Right to Know Act.
Pennsylvania Right To Know ComponentsNo components are subject to the Pennsylvania Right to Know Act.
New Jersey Right To Know ComponentsNo components are subject to the New Jersey Right to Know Act.
California Prop. 65 ComponentsThis product does not contain any chemicals known to State of California to cause cancer, birth defects, or anyother reproductive harm.
16. OTHER INFORMATION
Revision Date: 15 March 2017
DisclaimerAll chemicals may pose unknown hazards and should be used with caution. This Safety Data Sheet (SDS)applies only to the material as packaged. If this product is combined with other materials, deteriorates, orbecomes contaminated, it may pose hazards not mentioned in this SDS. The physical properties reported inthis SDS are consistent with the information provided to Artel, by the manufacturer of the components of themixture, except as stated otherwise, and are believed to be accurate and should be used as a guide only. Nowarranty or guarantee is expressed or implied with respect to the information provided. Artel, Inc. assumes noresponsibility as a result of incidental or consequential damages, including lost profits, arising from the use ofthis data. No warranty against infringement of any patents, copyright or trademark is made or implied. It shallbe the user’s responsibility to develop proper methods of handling and personal protection based on the actualconditions of use. While this SDS is based on technical data judged to be reliable, Artel assumes noresponsibility for the completeness or accuracy of the information contained herein.