Ferdinand Schad KGSteigstraße 25-27
D-78600 KolbingenTelephone +49 (0) 74 63 - 980 - 0
Fax +49 (0) 74 63 - 980 - [email protected]
Round Duct SystemModel RR-Complete
Contents
Construction subject to change. No return possible!
Round Duct System RR-COMPLETE
01/18 - 2 23.08.2018Version:
Description ........................................................................................................................................4Component overview ................................................................................................................................................................. 4Quick selection of components and sizes .................................................................................................................................. 5Fastening ................................................................................................................................................................................... 6Quick selection of the possible combinations ............................................................................................................................ 7
Volumetric flow controller model VRA-RR ...................................................................................................8Description ................................................................................................................................................................................ 8Installation ................................................................................................................................................................................. 9Construction .............................................................................................................................................................................. 9Accessories ................................................................................................................................................................................ 9Model ......................................................................................................................................................................................... 9Dimensions .............................................................................................................................................................................. 10Standard controllers and drives ............................................................................................................................................... 10Technical data .......................................................................................................................................................................... 10Quick selection ......................................................................................................................................................................... 10Controller selection .................................................................................................................................................................. 11
Volumetric flow restrictor DKA-MKA-RR .................................................................................................... 12Description .............................................................................................................................................................................. 12Construction ............................................................................................................................................................................ 12Accessories .............................................................................................................................................................................. 12Model ....................................................................................................................................................................................... 12Dimensions .............................................................................................................................................................................. 13Differential pressure diagram ................................................................................................................................................... 14
Duct silencer RS-RR ........................................................................................................................... 15Description .............................................................................................................................................................................. 15Construction ............................................................................................................................................................................ 15Accessories .............................................................................................................................................................................. 15Model ....................................................................................................................................................................................... 15Dimensions .............................................................................................................................................................................. 15
RR diffuser components ....................................................................................................................... 17Function ................................................................................................................................................................................... 17Fastening ................................................................................................................................................................................. 17Length of sections RR diffuser components ............................................................................................................................ 17
Round Duct Diffuser Model DBB-RR ......................................................................................................... 18Description .............................................................................................................................................................................. 18Construction ............................................................................................................................................................................ 18Accessories .............................................................................................................................................................................. 18Model ....................................................................................................................................................................................... 18Blade adjustment options ........................................................................................................................................................ 18Dimensions .............................................................................................................................................................................. 19
Round Duct Grille KG-RR ...................................................................................................................... 20Description .............................................................................................................................................................................. 20Construction ............................................................................................................................................................................ 20Accessories .............................................................................................................................................................................. 20Model ....................................................................................................................................................................................... 20Blade adjustment options ........................................................................................................................................................ 20Correction factor (for scattered air jet) ..................................................................................................................................... 21Dimensions .............................................................................................................................................................................. 21
Round Duct Nozzle Jet Diffuser DSA-RR .................................................................................................... 22Description .............................................................................................................................................................................. 22Construction ............................................................................................................................................................................ 22Accessories .............................................................................................................................................................................. 22Model ....................................................................................................................................................................................... 22Dimensions .............................................................................................................................................................................. 23
Long Throw Nozzle Grille with Integrated Round Duct Model WGA-V-RR ............................................................. 24Description .............................................................................................................................................................................. 24
Contents
Construction subject to change. No return possible!
Round Duct System RR-COMPLETE
01/18 - 3 23.08.2018Version:
Construction ............................................................................................................................................................................ 24Accessories .............................................................................................................................................................................. 24Model ....................................................................................................................................................................................... 24Dimensions .............................................................................................................................................................................. 25
Accessories for round duct system RR-COMPLETE ....................................................................................... 26Description .............................................................................................................................................................................. 26Construction ............................................................................................................................................................................ 26Dimensions .............................................................................................................................................................................. 27- Dummy pipe (-BR) ................................................................................................................................................................ 27- Connection sleeve (-M) ......................................................................................................................................................... 27- Rosette (-RO) ........................................................................................................................................................................ 27- End cover .............................................................................................................................................................................. 27- T-piece 90° (-ATE) ................................................................................................................................................................. 28- Y-piece (-HSE) ....................................................................................................................................................................... 28- Pressed bend (-BGE) ............................................................................................................................................................. 28- Bent segment (-BSE) ............................................................................................................................................................. 28- Symmetric reduction piece (-USE) ........................................................................................................................................ 28- Asymmetric reduction piece (-UAE) ....................................................................................................................................... 28
Order details .................................................................................................................................... 29VRA-RR ................................................................................................................................................................................... 29DKA-MKA-RR .......................................................................................................................................................................... 29RS-RR ...................................................................................................................................................................................... 29DBB-RR ................................................................................................................................................................................... 30KG-RR ...................................................................................................................................................................................... 31DSA-RR ................................................................................................................................................................................... 32WGA-V-RR ............................................................................................................................................................................... 33Accessories for round duct system RR-COMPLETE ................................................................................................................ 34
Specification text ............................................................................................................................... 35VRA-RR ................................................................................................................................................................................... 35DKA-MKA-RR .......................................................................................................................................................................... 36RS-RR ...................................................................................................................................................................................... 36DBB-RR ................................................................................................................................................................................... 37KG-RR ...................................................................................................................................................................................... 37DSA-RR ................................................................................................................................................................................... 38WGA-V-RR ............................................................................................................................................................................... 38Accessories for round duct system RR-COMPLETE ................................................................................................................ 39
Legend ........................................................................................................................................... 40Installation, Mounting and Maintenance ................................................................................................... 41
Installation position ................................................................................................................................................................. 41Mounting ................................................................................................................................................................................. 41Maintenance ............................................................................................................................................................................ 41
Round Duct System RR-COMPLETE
01/18 - 4
Construction subject to change. No return possible!
23.08.2018Version:
DescriptionIn modern architecture, sheet metal and spiral ducts of air-con-ditioning systems are often incorporated in the design of theroom. Emphasis is often placed deliberately on parts of the sup-ply system. In this visible installation of the ventilation ducts, itis a good idea to integrate volumetric flow controllers, duct si-lencers and air diffusers into the ducts. In order to be able to offer planners a technically outstandingsystem, which can also be well integrated into modern architec-tural concepts, we have developed the round duct system typeRR-COMPLETE.Its modular design allows architects and planners to constructfreely visible ventilation systems on the highest esthetic level.They thus provide a room with visual highlights. The system can be used in laboratories, schools, kindergartens,swimming pools, offices, showrooms, seminar rooms, restau-rants, gymnasiums, multi-purpose halls and even in residentialbuildings, in theory almost anywhere.Apart from its versatile geometric options, the round duct sys-tem harmonises with its environment also in terms of colour.The technical aspects of the round duct system impress withtheir wide range of components. Volumetric flow controllers,measuring cross/damper combinations and not least supply airand return air diffusers - vertical or horizontal mounting possi-ble - can be combined to give a complete system. All compo-nents can be manufactured to the same diameters and to auniform duct design.In addition to electric volumetric flow controllers, as an alterna-tive, a manually operated combination of measuring cross anddamper for regulation of the volumetric flow can also be used.The round duct system is already designed in the planning stageat SCHAKO and supplied to the customer as CAD drawing. Thisguarantees that all components are optimally tuned to one an-other.In on-site mounting, the round duct system excels with its pre-mounted suspension devices such as the rivet nuts for thethreaded bars.For maintenance, service, retrofitting, etc., inspection openingsin sufficient number and size must be provided on-site.The different components are connected by using connectingsockets.
Advantages:
Component overview
- Complete: Implementation of a complete and adjustable sys-tem: integrated supply air and return air diffusers, controlla-ble volumes.
- Aesthetic: All components can be manufactured to the samediameters and to a uniform duct design.
- Flexible: Any geometry is possible thanks to the combinationof dummy pipes, bends, arc segments and connecting piec-es.
- Adaptable: The galvanised sheet steel model is available in allRAL colours, and the stainless steel model is suitable for ag-gressive environments.
- Easy to mount: Pre-mounted suspension devices reduce theassembly time.
- CAD-supported: Technical design by SCHAKO, the custom-ers gets finished CAD drawings.
- Design: The technical design of the duct system is only pos-sible by means of the SCHAKO layout program.
- Volumetric flow controller VRA-RR (page 8)- Volumetric flow restrictor DKA-MKA (page 12)- Duct silencer RS-RR (page 15)- RR diffuser components (page 17- Round duct diffuser DBB-RR (page 18)- Round Duct Grille KG-RR (page 20)- Round Duct Nozzle Jet Diffuser DSA-RR (page 22)- Long-Throw Nozzle Grille with Integrated Round Duct WGA-
V-RR (page 24)
Round Duct System RR-COMPLETE
01/18 - 5
Construction subject to change. No return possible!
23.08.2018Version:
Quick selection of components and sizes
Volumetric flow controller model VRA-RR
Volumetric flow meter DKA-MKA-RR
Duct silencer RS-RR
Round Duct Diffuser Model DBB-RR
Round Duct Grille KG-RR
NW P L200 20 575224 32 575250 45 575280 40 660315 45 705355 52,5 760400 42,5 885450 47,5 975500 50 1115
NW P L200 20 575224 32 575250 45 575280 40 660315 45 705355 52,5 760400 42,5 885450 47,5 975500 50 1115
NW P L200 20
1-pa
rt 500750
1000
224 32250 45280 40315 45
2-pa
rt 150017502000
355 52,5400 42,5450 47,5500 50
P (mm) = Packing thicknessL (mm) = Length
NWNumber of slots along circumference L
2 4 6 8 10 12 14
200 x x - - - - -
1-pa
rt 5007501000
224 x x - - - - -250 x x - - - - -280 x x x - - - -315 x x x - - - -
2-pa
rt 150017502000
355 x x x x - - -400 x x x x - - -450 x x x x - - -500 x x x x x x x560 x x x x x x x630 x x x x x x x710 x x x x x x x800 x x x x x x x900 x x x x x x x
NW Height H L65 115 215 315
200 x x - -
1-pa
rt 500750
1000
224 x x - -250 x x x -280 x x x -315 x x x -
2-pa
rt 150017502000
355 x x x x400 x x x x450 x x x x500 x x x x560 x x x x
630 x x x x
710 x x x x
800 x x x x
900 x x x x
Round Duct System RR-COMPLETE
01/18 - 6
Construction subject to change. No return possible!
23.08.2018Version:
Round Duct Nozzle Jet Diffuser DSA-RR
Long Throw Nozzle Grille with Integrated Round Duct Model WGA-V-RR
Fastening
NW Nozzle rows L1 2 4
200 x x -
1-pa
rt 500750
1000
224 x x -250 x x -280 x x -315 x x -
2-pa
rt 150017502000
355 x x -400 x x x450 x x x500 x x x
560 x x x
630 x x x
710 x x x
800 x x x
900 x x x
NW Nozzle rows L1 2
200 x -
1-pa
rt 500750
1000
224 x -250 x -280 x -315 x -
2-pa
rt 150017502000
355 x -400 x x450 x x500 x x560 x x
630 x x
710 x x
800 x x
900 x x
Suspension- prepared for suspended installation using M8 threaded rods
to be provided by the customer.
Round Duct System RR-COMPLETE
01/18 - 7
Construction subject to change. No return possible!
23.08.2018Version:
Quick selection of the possible combinations
NW VRA-RR DKA-MKA-RR RS-RR DBB-RR KG-RR DSA-RR WGA-V-RR
200 x x x x x x x
224 x x x x x x x
250 x x x x x x x
280 x x x x x x x
315 x x x x x x x
355 x x x x x x x
400 x x x x x x x
450 x x x x x x x
500 x x x x x x x
560 - - - x x x x
630 - - - x x x x
710 - - - x x x x
800 - - - x x x x
900 - - - x x x x
x = available- = not available
Round Duct System RR-COMPLETE
01/18 - 8
Construction subject to change. No return possible!
23.08.2018Version:
Volumetric flow controller model VRA-RRDescriptionA volumetric flow controller is used for pressure-independentvolumetric flow regulation in ventilation and air-conditioningsystems. It is used to keep the volumetric flow constant (CAV)within specified limits or to control it variably (VAV) as a func-tion of a command variable, for example a room temperaturecontroller, DDC or bus system. For constant volumetric flows,the operating stages CLOSED/Vmin/Vmid/Vmax/OPEN are availa-ble in stage operation, controlled via relays or switches. Thehousing, measuring sensor, control flap, PI controller with pres-sure sensor and actuator form a closed control loop with feed-back, allowing demand-dependent, energy-saving air-conditioning of the single rooms or areas of air-conditioningsystems. When suitable electrical controller types are used,room or duct pressure regulation can be achieved.
The first adjustment of the Vmin, Vmax and Vnenn operating volu-metric flows is done prior to delivery ex works in accordancewith specific customer requirements, although Vmin and Vmaxcan be easily changed at any time with the controller alreadymounted by means of the handheld control device or the PC-Tool software. When these values are set, the functions of allvolumetric flow controllers are also checked. The operatingpoint Vmax can be set in the range 20 (30)...100% of the nominalvolumetric flow of the box, while the operating point Vmin is setin the range 0...100%, relative to Vmax or Vnenn (depending onthe controller types). The maximum deviation of the volumetricflows is +/- 5%, relative to the nominal volumetric flow Vnenn,based on a calibration curve of 12 m/sec. At lower flow rates, thedeviation in percent may increase.
For the calibration of the controllers, a curve with a flow rate of12 m/ sec is available. For constant-volume volumetric flowcontrollers, the Vmin value will be set to the desired constant-volume value. If the calibration curve must be changed on site, the controllersmust either be recalibrated ex-factory or the calibration curvemust be changed on site by the customer service of Schako.
For the measurement of the differential pressure, SCHAKO isusing its measuring principle by means of a double measuringcross made of extruded aluminium profile, to which 12 measur-ing points have been attached on the pressure and suction side,respectively, by the median line method, in order to determineaverage values. In comparison with measuring rods or measur-ing orifices having fewer measuring points, this gives higher ac-curacy, allowing the inflow area required in front of thevolumetric flow controller to be minimised (see page 7 - Instal-lation Information).
When using the controllers in systems with heavy dust contam-ination, suitable filters must be used. For contaminated or ag-gressive air or air containing fluffy material, only thosecontroller types must be used that incorporate a differentialpressure sensor. Since the membrane zero point must not bechanged in static sensors, the mounting instructions document-ed by the manufacturer must be adhered to. The volumetric flowcontrollers type VRA are not suitable for air containing stickyand greasy particles (e.g. kitchen exhaust air).
Housing leakage according to DIN EN 1751, class B, at a ductpressure of up to 1000 Pa.Leakage with damper blade closed according to DIN EN 1751Class 3 at a duct pressure of up to 1000 Pa.Higher requirements upon request.
The volumetric flow controller VRA has been tested successfullyby TÜV SÜD in accordance with the following regulations:
For maintenance, service, retrofitting, etc., inspection openingsin sufficient number and size must be provided on-site.
Field of application
Before connecting SCHAKO components to customer installa-tions, any compatibility problems must be solved on-site andare not our area of responsibility.
- VDI 6022, Sheet 1: Hygienic requirements of ventilation andair-conditioning systems
- VDI 6022, Sheet 2: Hygienic requirements of ventilation andair-conditioning systems - Measurement methods and inves-tigations during hygienic controls and hygienic inspections
- DIN 1946, Sheet 2: Air-conditioning technology - Health re-quirements
- for supply and return air systems- for constant CAV or variable VAV installations- for positive control Vmin, Vmid, Vmax, "OPEN" or "CLOSED"- For volumetric flow and linear pressure control- in the differential pressure range 50 - 1,000 Pascal- at ambient temperatures 0 ...+...50°C, requirement: measur-
ing air 0...+ 50°C/5...95% rH, non-condensing- with command signal 0...10V DC, 2...10V DC, via MP bus (Be-
limo), digital LonWorks or Modbus- with supply voltage 24 V AC (19.2..28.8 V) or 24 V DC
(21.6..28.8 V)- with DD varnish coating for aggressive media- for regulating the air velocity in the duct in the range 1..12 m/
s (electric).- can also be used with vertical axis
Round Duct System RR-COMPLETE
01/18 - 9
Construction subject to change. No return possible!
23.08.2018Version:
InstallationInstallation informationTo avoid unnecessary controller errors, the min. distances ac-cording to the following table / drawings must be observed. Allvolumetric flow controllers can be assembled with horizontal orvertical damper axis.
Installation information for VRA-RR (round)Distance to a connection piece
Distance to a diffuser
Mounting position, see page 41
Construction
Accessories
Model
Attention!We would like to point out that for cleaning stainless steel mod-els, only suitable cleaning materials may be used!
Distance to: VRA-RRConnection piece: 2 x diameterDiffuser: 2 x diameter
Housing (outer tube / end cover)- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (V2A) painted in colour sand silver
(-ES, at an extra charge)Inner tube and damper blade
- Manufactured from the same material as the housing- Galvanised sheet steel- stainless steel 1.4301 (V2A)
Insulation- integrated acoustic cladding with non-flammable mineral
wool filling to DIN 4102 A2Damper leaf seal
- made of PUR, silicone-free- for airtight sealing design to DIN EN 1751
Damper bearing- Brass
Measuring cross- Extruded aluminium profile (for stainless steel design with
DD coating)Measuring cross support
- Plastic (PA6)Rubber lip seal
- on both sides, made of EPDM
- RAL colour of your choice (at an extra charge)
VRA-RR - with electric controller- Control voltage 24 V AC 50/60 Hz- alternatively with spring return actuator zero-
current "CLOSED" or zero-current "OPEN" (atan extra charge)
- alternatively with high-speed actuator run-ning time 3-5 s for 90° angle of rotation (at anextra charge)
VRA-RR-3U - Position electric controller: on the right-handside (3 o'clock)
VRA-RR-9U - Position electric controller: on the left-handside (9 o'clock)
VRA-RR-0U - Position electric controller: on top(12 o'clock)
Round Duct System RR-COMPLETE
01/18 - 10
Construction subject to change. No return possible!
23.08.2018Version:
DimensionsVRA-RR-0U
Available sizes VRA-RR-...
Sealing airtight to DIN EN 1751 (class 3).
Rubber lip sealDetail X
Detail Y
Standard controllers and drives
Technical dataQuick selection for total air volumes of the duct system per branch duct
24 V
outs
ide
outs
ide Air flow direction
NW øD ød P L200 198 158 20 575224 222 158 32 575250 248 158 45 575280 278 198 40 660315 313 223 45 705355 353 248 52,5 760400 398 313 42,5 885450 448 353 47,5 975500 498 398 50 1115
P (mm) = Packing thickness
Rivet nut M8
Threaded rod on site
Type VRA-RRSize ø200 - ø500Controller / Drive LMV-D3-MPActuator CompactMake Belimo
NW øD ød V Belimo VRP-M Belimo Compact /Gruner (on re-
quest)(mm) (mm) (mm) vmin vmax vmin vmax
(2 m/s) (12 m/s) (1 m/s) (12 m/s)
200 198 158m³/h 139 836 69 836l/s 39 232 19 232
224 222 158m³/h 139 836 69 836l/s 39 232 19 232
250 248 158m³/h 139 836 69 836l/s 39 232 19 232
280 278 198m³/h 219 1317 110 1317l/s 61 366 31 366
315 313 223m³/h 279 1672 139 1672l/s 78 464 39 464
355 353 248m³/h 345 2070 172 2070l/s 96 575 48 575
400 398 313m³/h 550 3303 275 3303l/s 153 918 76 918
450 448 353m³/h 701 4204 350 4204l/s 195 1168 97 1168
500 498 398m³/h 891 5348 446 5348l/s 248 1486 124 1486
Round Duct System RR-COMPLETE
01/18 - 11
Construction subject to change. No return possible!
23.08.2018Version:
Attention, the following specifications are important for theprogramming of the volumetric flow controllers:
Technical dataFor further technical data (e.g. static minimum pressure differ-ence, sound values, etc.), the technical data of the controller(circuit diagrams, etc.) as well as assembly and maintenance in-structions, refer to documentation volumetric flow controllerVRA, register 08, catalogue 2 or the SCHAKO design pro-gramme.
Controller selection
Accessories:S1A/S2A, limit switch make Belimo, to fit all new compact controllersand actuators of make Belimo.ZTH-EU/PC-Tool for Belimo...GUIV-O for Gruner
Legend, see page 40Order details, see page 29Specification text, see page 35
- this table merely specifies the complete measuring range ofthe controller (volumetric flow range)
- If the customer absolutely wants a calibration curve differentfrom 12 m/s, it must be specified!
- When the air volume drops below the Vmin shown in thechart, the correct functioning of the volumetric flow controlleris no longer guaranteed!
- If only one air volume is specified in the order (as Vmax value),the volumetric flow controller will be delivered as variable vol-umetric flow controller. The Vmin value will be set to the valuespecified in the catalogue.
- If only one air volume is specified in the order (as Vmin orVkonstant value or without value specification), then the volu-metric flow controller will be delivered as a constant volumet-ric flow controller. The volume specified in the order is set tothe Vmin value, and the Vmax value is set to 100%.
- The air volumes can be changed using setting devices specif-ic of the controller make, depending on the calibration curveset ex works.
- For the parameter setting of the control components (all con-trollers), an air density of 1.2 kg/m³ has been taken into ac-count.
- Belimo compact controllers are height-compensated. Theyare calibrated ex works to the system height in question of thespecified installation site.
- If no system height is given in the order, the controllers willbe set to the elevation of the delivery address.
- If the customer does not specify whether the "Parallel" or"Master/Slave" operating mode is desired, the controller is setfor the parallel operation (Master/Slave mode only upon cus-tomer request).
Electric controller: Actuator:VRA-RR-E
- Belimo:- LMV-D3-MP Compact- VRP-M-VFP 300 NMQ24A-SRV-ST (high-speed
damper drive)NM24A-V-STLF24A-V (spring return)
- LMV-D3MOD Compact- LMV-D3LON Compact
- Gruner :- 227VM-024-05 Compact- GUAC-SM3/SCH 227C-024-05-V
227CS-024-05-V (high-speed damp-er drive)341C-024-05-V (spring return)
Round Duct System RR-COMPLETE
01/18 - 12
Construction subject to change. No return possible!
23.08.2018Version:
Volumetric flow restrictor DKA-MKA-RRDescriptionFor quick, easy control of the supply air volume, the DKA-MKA-RR was especially developed for the round duct system RR-COMPLETE.The round, manually adjustable volumetric flow restrictorDKA-MKA-RR is suitable for installation in round supply air andreturn air ducts according to DIN 24145 or 24146. It is used forregulating the volumetric flows in air-conditioning installations.The integrated volumetric flow controller measuring cross typeis mainly used for measuring the air volumetric flow down-stream of the central unit or fan or for adjusting branch ducts orin ventilation and air-conditioning installations of large shop-ping centres having several tenants, for determining the sharein energy costs of the ventilation and air-conditioning installa-tion.
The hand-adjustable device with integrated position indicatorallows an exact setting of the damper blade, without tools, be-tween 0° and 90°. The housing is dimensionally stable due tostandard double beads. The throttle damper can be used at temperatures between 0°Cand +50°C. Maximum duct pressure 500 Pa.
The measuring cross substantially facilitates the measurementof the air volumetric flow, compared with the previous cost- andtime-intensive measuring method, in which many individualpoints have to be measured.The measuring deviation of the volumetric flow measuringcross is+ 5% bei 100 % Vmax. The measuring cross is largely insensitive to the intake flow,since 12 measuring points are distributed on this measuringcross according to the median line method. In comparison withmeasuring rods having only 4 measuring points or measuringorifices, this gives optimum measurement results. In order toexclude any unnecessary sources of errors, please observe tothe assembly method for VRA-RR on page 7.The differential pressure determined at the measuring cross canbe measured with a (static or dynamic) pressure measuring de-vice. When using the measuring crosses in systems with heavy dustcontamination, suitable filters must be connected upstream.The measuring crosses are not suitable for air with greasy andsticky particles.
For maintenance, service, retrofitting, etc., inspection openings in sufficient number and size must be provided on-site.
Advantages:
Mounting position, see page 41
Construction
Accessories
Model
Field of application
Attention!We would like to point out that for cleaning stainless steel mod-els, only suitable cleaning materials may be used!
- stable design- easy to regulate- assembly-friendly- fits position-independent
Housing (outer tube / end cover)- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)Inner tube, damper blade and manual adjusting device
- Manufactured from the same material as the housing- Galvanised sheet steel- stainless steel 1.4301 (V2A)
Insulation- integrated acoustic cladding with non-flammable min-
eral wool filling to DIN 4102 A2Damper leaf seal
- made of PUR, silicone-free- for airtight sealing design to DIN EN 1751, class 3
Damper bearing- Brass
Measuring cross- Extruded aluminium profile (for stainless steel design
with DD coating)Measuring cross support
- Plastic (PA6)Rubber lip seal
- on both sides, made of EPDM
- RAL colour of your choice (at an extra charge)
DKA-MKA-RR - with manual adjusting deviceDKA-MKA-RR-3U - Position manual adjustment: on the
right-hand side (3 o'clock)DKA-MKA-RR-9U - Position manual adjustment: on the left-
hand side (9 o'clock)
- for supply and return air systems- for constant or variable volumetric flows- differential pressure range from 50 to 1000 Pa- for ambient temperatures of 0 - 55°C
Round Duct System RR-COMPLETE
01/18 - 13
Construction subject to change. No return possible!
23.08.2018Version:
DimensionsDKA-MKA-RR-3U
Available sizes DKA-MKA-RR
Sealing airtight to DIN EN 1751 (class 3) Manual adjustment: available at the top or on the side
Rubber lip sealDetail X
Detail Y
outs
ide
outs
ide
hose connection on site
Air flow direction
NW øD ød P L200 198 158 20 575224 222 158 32 575250 248 158 45 575280 278 198 40 660315 313 223 45 705355 353 248 52,5 760400 398 313 42,5 885450 448 353 47,5 975500 498 398 50 1115
P (mm) = Packing thickness
Rivet nut M8
Threaded rod on site
Round Duct System RR-COMPLETE
01/18 - 14
Construction subject to change. No return possible!
23.08.2018Version:
Differential pressure diagram
Legend, see page 40Order details, see page 29Specification text, see page 36
Round Duct System RR-COMPLETE
01/18 - 15
Construction subject to change. No return possible!
23.08.2018Version:
Duct silencer RS-RRDescriptionSilencing of the duct silencer type RS-RR in accordance with theabsorption principle is done by means of an annular chamberfilled with mineral wool according to DIN 4102 A2 non-flamma-ble, mineral wool with glass silk cover. Specially designed forthe round duct system RR-COMPLETE with the same duct di-ameter, the duct silencer is adapted optically to the remainingcomponents.For maintenance, service, retrofitting, etc., inspection openings in sufficient number and size must be provided on-site.
Attention:The use of the RS-RR is not only designed for minimising the flow-generated noise of the volumetric flow controller, but also for preventing the cross-talk sound transmission from room to room!
Construction
Accessories
Model
Attention!We would like to point out that for cleaning stainless steel mod-els, only suitable cleaning materials may be used!
Mounting position, see page 41
DimensionsRS-RR
Available sizes
Rubber lip sealDetail X
Detail Y
Technical dataFor the technical data, please refer to the SCHAKO layout pro-gram
Housing- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- painted to RAL colour of your choice (at an extra
charge)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)Inner tube
- Manufactured from the same material as the housing- Galvanised sheet steel- stainless steel 1.4301 (V2A)
Rubber lip seal- on both sides, made of EPDM
- RAL colour of your choice (at an extra charge)
RS-RR - Annular chamber with mineral wool filling
NWøDmm
ødmm
Pmm
Lmm
200 198 158 20
1-pa
rt 500750
1000
224 222 158 32250 248 158 45280 278 198 40315 313 223 45
2-pa
rt 150017502000
355 353 248 52,5400 398 313 42,5450 448 353 47,5500 498 398 50
P (mm) = Packing thickness
outs
ide
outs
ide
Rivet nut M8
Threaded rod on site
Round Duct System RR-COMPLETE
01/18 - 16
Construction subject to change. No return possible!
23.08.2018Version:
Division of length RS-RR1-part
2-part
Legend, see page 40Order details, see page 29Specification text, see page 36
Lengths 500/750/1000
Length 1500
Length 1750
Length 2000
Round Duct System RR-COMPLETE
01/18 - 17
Construction subject to change. No return possible!
23.08.2018Version:
RR diffuser components(DBB-RR / KG-RR / DSA-RR / WGA-V-RR)
FunctionIn modern architecture, sheet metal and spiral ducts of air-con-ditioning systems are often incorporated in the design of theroom. Emphasis is often placed deliberately on parts of the sup-ply system. In this visible installation of the ventilation ducts, itis a good idea to integrate the air diffusers into the ducts.In order to be able to offer planners a technically advanced airdiffuser, which can also be well integrated into modern architec-tural concepts, we have developed our round duct diffusersDBB-RR, KG-RR, DSA-RR and WGA-V-RR.The RR diffusers consist of a round duct with integrated blades(DBB-RR / KG-RR) or integrated nozzles (DSA-RR / WGA-V-RR).
Advantages:
Fastening
Length of sections RR diffuser components1-part:
2-part:
RR diffuser components with a length of > 1000 mm are pro-duced in two parts and joined in-factory with a connectingsleeve. The dimensions of the dummy pipe are the same asthose of the RR diffuser components DBB-RR / KG-RR / DSA-RR / WGA-V-RR. A different length of sections is possible on request. However, the maximum length for a middle or end piece is 1000 mm.
- Noise level and pressure loss in all blade or nozzle positionsremain the same when changing the air flow direction.
- Dimensionally stable smooth duct is easy to clean.
Suspension- prepared for suspended installation by using an M8
threaded rod to be provided by the customer.
Length 500 Length 750 Length 1000
Length 1500
Length 1750
Length 2000
Round Duct System RR-COMPLETE
01/18 - 18
Construction subject to change. No return possible!
23.08.2018Version:
Round Duct Diffuser Model DBB-RRDescriptionThe round duct diffuser DBB-RR consists of a round duct withintegrated, linear nozzles, which can also be adjusted subse-quently by hand, with integrated hit-and-miss damper, whichallows the air to be blown absolutely uniformly over the entirediffuser area. The centrally arranged blades in support profilesections ensure that the free cross-section at every blade is thesame. As a result, the noise level and pressure are not affectedby changing the blade position. In heating mode, this allows alarge penetration depth, thus providing an effective, cost-sav-ing heating phase. In cooling mode, the maximum end velocityof jet and temperature difference are reduced to such an extentthat no draughts are produced in the occupied zone. During the installation, the round duct diffuser must be mount-ed in accordance with the desired air direction. The blades andthe hit-and-miss damper are positioned on the round duct at 3o'clock (-3U), 6 o'clock (-6U, standard), 9 o'clock (-9U) or 12o'clock (0U).This uniform admission allows the round duct diffuser DBB-RRto be installed at any point along the duct system.
Construction
Accessories
Attention!We would like to point out that for cleaning stainless steel mod-els, only suitable cleaning materials may be used!
Model
Mounting position, see page 41
Blade adjustment optionsThrow directions (blade position 6 o'clock)
one-way horizontal (-He)
two-way horizontal (-Hb, standard)
vertical (-V)
crosswise (-K)
Round duct- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)Blades
- Plastic, similar to RAL colour 9010 (white) or RAL 9005(black)
- Aluminium painted to the RAL colour of the faceplate. Thepainted blades cannot be adjusted subsequently
hit-and-miss damper- manufactured from the same material as the round duct
- Galvanised sheet steel- stainless steel 1.4301 (V2A)
Rubber lip seal- on both sides, made of EPDM
- RAL colour of your choice (at an extra charge)
DBB-RR-Z - Supply air model with air deflection blades.
DBB-RR-A - Return air model without air deflection blades.
DBB-RR-...-3U - horizontal throw right (3 o'clock)DBB-RR-...-6U - vertical throw downward (6 o'clock)
(standard)DBB-RR-...-9U - horizontal throw left (9 o'clock)DBB-RR-...-0U - vertical throw upward (12 o'clock)
Round Duct System RR-COMPLETE
01/18 - 19
Construction subject to change. No return possible!
23.08.2018Version:
DimensionsDBB-RR-6U
Available sizes
All combined lengths and nominal widths available!
Detail XRubber lip seal (-GD)
Technical dataFor the technical data, please refer to the SCHAKO layout pro-gram or the technical documentation Round duct diffuser DBB-RR, register 01, catalogue 1.
Legend, see page 40Order details, see page 30Specification text, see page 37
Air flow directionhit-and-miss damper
outs
ide
Banding from size 500
riveting nut M8
Threaded rod on site
Only applies to suspended installation from the ceiling:prepared for suspended installation from the ceiling by using an M8 threaded rod to be provided by the customer.
Detail Y
NW øD Number of slots along circumference2 4 6 8 10 12 14
200 198 x x - - - - -224 222 x x - - - - -250 248 x x - - - - -280 278 x x x - - - -315 313 x x x - - - -355 353 x x x x - - -400 398 x x x x - - -450 448 x x x x - - -500 498 x x x x x x x560 558 x x x x x x x630 628 x x x x x x x710 708 x x x x x x x800 798 x x x x x x x900 898 x x x x x x x
x = available- = not available
Length L Number of slotslengthwise
Division of length: see Page 17
1-pa
rt 500 1750 21000 3
2-pa
rt 1500 41750 52000 6
Round Duct System RR-COMPLETE
01/18 - 20
Construction subject to change. No return possible!
23.08.2018Version:
Round Duct Grille KG-RRDescriptionThe round duct grille type KG-RR is suitable for installation insupply or return air systems. The air volume throughput can beregulated by using an integrated hit-and-miss damper. The in-tegrated hit-and-miss damper ensures a uniform distribution ofsupply air along the whole length of the grille.The round duct grille can be installed at any point of the ductsystem. The front side horizontal and vertical blades can beadjusted. A divergent air throw pattern can be set. This widensthe air jet, supplying a larger area of the occupied zone withfresh air.During the installation, the round duct grille must be mountedin accordance with the desired air direction. The blades and the hit-and-miss damper are positioned on theround duct at 3 o'clock (-3U), 6 o'clock (-6U, standard), 9o'clock (-9U) or 12 o'clock (0U).
Construction
Accessories
Model
Mounting position, see page 41
Attention!We would like to point out that for cleaning stainless steel mod-els, only suitable cleaning materials may be used!
Air throw pattern
Blade adjustment optionsThrow directions (mounting position 6 o'clock)KG-RR-8 vertical air deflection blades
one-way horizontal (-He-..., only KG-RR-8)
opposite to one another (-Ge-..., only KG-RR-15)
vertical straight (-V)
divergent 44° (-D44) (scattered air jet)
divergent 84° (-D84) (scattered air jet)
The angle of propagation of the air jet and thus the length ofthrow can be affected by adjusting the vertical air deflectionblades.
Round duct and blades- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)hit-and-miss damper
- manufactured from the same material as the round duct- Galvanised sheet steel- stainless steel 1.4301 (V2A)
Rubber lip seal- on both sides, made of EPDM
- RAL colour of your choice (at an extra charge)
KG-RR-8 - horizontal air deflection bladesKG-RR-15 - vertical air deflection bladesKG-RR-...-3U - horizontal throw right (3 o'clock)KG-RR-...-6U - vertical throw downward (6 o'clock) (stand-
ard)KG-RR-...-9U - horizontal throw left (9 o'clock)KG-RR-...-0U - vertical throw upward (12 o'clock)
straight diverging
KG-RR-8right (-re) left (-li)
KG-RR-15
KG-RR-8 KG-RR-15
KG-RR-8 KG-RR-15
KG-RR-8 KG-RR-15
Round Duct System RR-COMPLETE
01/18 - 21
Construction subject to change. No return possible!
23.08.2018Version:
Correction factor (for scattered air jet)with or without coanda effect
DimensionsKG-RR-8-6U
KG-RR-15-6U
Detail Y
Available sizes
All combined lengths and nominal widths available!
Division of length: see page 17
Detail XRubber lip seal (-GD)
Technical dataFor the technical data, please refer to the SCHAKO layout pro-gram or the technical documentation Round duct diffuser KG-RR, register 01, catalogue 1.
Legend, see page 40Order details, see page 31Specification text, see page 37
Blade position 44° 84°End velocity of jet vmax (m/s) × 0.65 vmax (m/s) × 0.5TV = ΔTx / ΔT0 × 0.65 × 0.5Induction ratio i × 1.3 i × 2Jet drop - Jet rise y × 1.3 y × 2Grille distance z (m)> x × 0.20 x × 0.25
outs
ide
Banding from NW 500
Air flow direction
hit-and-miss damper
outs
ideAir flow direction
Banding from NW 500
hit-and-miss damper
riveting nut M8
Threaded rod on site
Only applies to suspended installation from the ceiling:prepared for suspended installation from the ceiling by using an M8 threaded rod to be provided by the customer.
NW øD Height H65 115 215 315
200 198 x x - -224 222 x x - -250 248 x x x -280 278 x x x -315 313 x x x -355 353 x x x x400 398 x x x x450 448 x x x x500 598 x x x x560 558 x x x x630 628 x x x x710 708 x x x x800 798 x x x x900 898 x x x x
x = available- = not available
Length L Number of slotslengthwise
1-pa
rt 500 1750 21000 3
2-pa
rt 1500 41750 52000 6
Round Duct System RR-COMPLETE
01/18 - 22
Construction subject to change. No return possible!
23.08.2018Version:
Round Duct Nozzle Jet Diffuser DSA-RRDescriptionThe round duct nozzle jet diffuser type DSA-RR is suitable forinstallation into supply air systems. The integrated nozzles ofthe DSA-RR-F version are not adjustable, those of the DSA-RR-V version are adjustable manually and individually. During the installation, the round duct nozzle jet diffuser mustbe mounted in accordance with the desired air direction. Thenozzles and the hit-and-miss damper are positioned on theround duct at 3 o'clock (-3U), 6 o'clock (-6U, standard), 9o'clock (-9U) or 12 o'clock (0U).A hit-and-miss damper, which ensures that the supply air is dis-charged uniformly across the whole diffuser area, can be inte-grated into the diffuser. Because of the uniform admission, theround duct nozzle jet diffuser type DSA-RR can be integrated atany point along the duct system.
Construction
Accessories
Model
Mounting position, see page 41
Attention!We would like to point out that for cleaning stainless steel mod-els, only suitable cleaning materials may be used!
Round duct- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in sand silver (-ES)
Nozzles- Plastic, similar to RAL colour 9010 (white, -DW) or RAL
9005 (black, -DS))
hit-and-miss damper- made of the same material as the round duct
- Galvanised sheet steel- stainless steel 1.4301 (V2A)
Rubber lip seal- on both sides, made of EPDM
- RAL colour of your choice (at an extra charge)
DSA-RR-F - with fixed nozzlesDSA-RR-V - with individually manually adjustable noz-
zlesDSA-RR-...-3U - horizontal throw right (3 o'clock)DSA-RR-...-6U - vertical throw downward (6 o'clock) (stand-
ard)DSA-RR-...-9U - horizontal throw left (9 o'clock)DSA-RR-...-0U - vertical throw upward (12 o'clock)
Round Duct System RR-COMPLETE
01/18 - 23
Construction subject to change. No return possible!
23.08.2018Version:
DimensionsDSA-RR-F-6U
DSA-RR-V-6U
Detail Y
Detail XRubber lip seal (-GD)
All combined lengths and nominal widths available!
Technical dataFor the technical data, please refer to the SCHAKO layout pro-gram nozzle jet diffuser DSA. Technical documentation Round Duct Nozzle Jet Diffuser DSA-RR, register 01, catalogue 1.
Legend, see page 40Order details, see page 32Specification text, see page 38
outs
ide
Air flow direction
Banding from NW 500
hit-and-miss damper(at an extra charge)
outs
ide
Air flow direction
Banding from NW 500
hit-and-miss damper(at an extra charge)
riveting nut M8
Threaded rod on site
Only applies to suspended installation from the ceiling:prepared for suspended installation from the ceiling by using an M8 threaded rod to be provided by the customer.
x = available- = not available
Available sizes
NW øD Nozzle rows1 2 4
200 198 x x -224 222 x x -250 248 x x -280 278 x x -315 313 x x -355 353 x x -400 398 x x x450 448 x x x500 498 x x x560 558 x x x630 628 x x x710 708 x x x800 798 x x x900 898 x x x
Division of length: see Page 17
Length L Number of slotslengthwise
1-pa
rt 500 1750 2
1000 3
2-pa
rt 1500 41750 52000 6
Round Duct System RR-COMPLETE
01/18 - 24
Construction subject to change. No return possible!
23.08.2018Version:
Long Throw Nozzle Grille with Integrated Round Duct Model WGA-V-RRDescriptionThe round duct long-throw nozzle grille WGA-V-RR is suitablefor use in supply air installations. The diffuser WGA-V-RR con-sists of a round duct with integrated, linear long range noz-zles, which can also be adjusted by hand on-site. The pivotangle is 45°. During the installation, the long-throw nozzle grille with inte-grated round duct must be mounted in accordance with the de-sired air direction. The nozzles and the hit-and-miss damperare positioned on the round duct at 3 o'clock (-3U), 6 o'clock (-6U, standard), 9 o'clock (-9U) or 12 o'clock (0U).A hit-and-miss damper, which ensures that the supply air is dis-charged uniformly across the whole diffuser area, can be inte-grated into the diffuser. Therefore, the long-throw nozzle grillewith integrated round duct WGA-V-RR can be installed at anypoint along this duct system.
Construction
Accessories
Model
Mounting position, see page 41
Attention!We would like to point out that for cleaning stainless steel models, only suitable cleaning materials may be used!
Round duct- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)Nozzles
- Plastic, similar to RAL colour 9010 (white, -DW) or RAL9005 (black, -DS))
hit-and-miss damper- made of the same material as the round duct
- Galvanised sheet steel- stainless steel 1.4301 (V2A)
Rubber lip seal- on both sides, made of EPDM
- RAL colour of your choice (at an extra charge)
WGA-V-RR - with individually manually adjustable noz-zles
WGA-V-RR-3U - horizontal throw right (3 o'clock)
WGA-V-RR-6U - vertical throw downward (6 o'clock) (stand-ard)
WGA-V-RR-9U - horizontal throw left (9 o'clock)WGA-V-RR-0U - vertical throw upward (12 o'clock)
Round Duct System RR-COMPLETE
01/18 - 25
Construction subject to change. No return possible!
23.08.2018Version:
DimensionsWGA-V-RR-6U
Detail XRubber lip seal (-GD)
Detail Y
Technical dataFor the technical data, please refer to the SCHAKO layout pro-gram Long-throw nozzle grille with integrated round duct WGA-V-RR. Technical documentation Long throw nozzle grille with integrated round duct WGA-V-RR, register 01, catalogue 1.
Legend, see page 40Order details, see page 33Specification text, see page 38
outs
ideAir flow direction
Banding from NW 500
hit-and-miss damper(at an extra charge)
riveting nut M8
Threaded rod on site
Only applies to suspend-ed installation from the ceiling:prepared for suspended installation from the ceil-ing by using an M8 thread-ed rod to be provided by
Available sizes
NW øD Nozzle rows1 2
200 198 x -224 222 x -250 248 x -280 278 x -315 313 x -355 353 x -400 398 x x450 448 x x500 498 x x560 558 x x630 628 x x710 708 x x800 798 x x900 898 x x
Division of length: see Page 17
Length L Number of slotslengthwise
1-pa
rt 500 1750 2
1000 3
2-pa
rt 1500 41750 52000 6
Round Duct System RR-COMPLETE
01/18 - 26
Construction subject to change. No return possible!
23.08.2018Version:
Accessories for round duct system RR-COMPLETEDescriptionIn modern architecture, sheet metal and spiral ducts of air-con-ditioning systems are often incorporated in the design of theroom. Emphasis is often placed deliberately on parts of the sup-ply system. In this visible installation of the ventilation ducts, alogical option is to integrate the volumetric flow controllers,duct silencers and air diffusers into the ducts. Accessories, such as dummy pipes, end covers and connectingsleeves complete the range for the round duct system RR-COM-PLETE.
Construction
Accessories
Attention!We would like to point out that for cleaning stainless steel mod-els, only suitable cleaning materials may be used!
Dummy pipe (-BR)- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)Connection sleeve (-M)
- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)Rosette (-RO)
- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)- End cover
- straight (-EG)- slanted (-EA), only available on requestconsisting of:
- Sheet steel painted to RAL 9010 (white)- Galvanised sheet steel- natural aluminium- Stainless steel 1.4301 (V2A) painted in the colour sand
silverT-piece 90° (-ATE)
- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)Y-piece (-HSE)
- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)
Pressed bend (-BGE), available up to ø315 mm- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)Bent segment (-BSE), available from ø355 mm
- Galvanised sheet steel (-SV)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)Symmetric reduction piece (-USE)
- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)Asymmetric reduction piece (-UAE)
- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)
Rubber lip seal- on both sides, made of EPDM
- RAL colour of your choice (at an extra charge)
Round Duct System RR-COMPLETE
01/18 - 27
Construction subject to change. No return possible!
23.08.2018Version:
Dimensions
- Dummy pipe (-BR)
Detail X
Rubber lip seal (-GD)Detail Y
- Connection sleeve (-M)
- Rosette (-RO)
- End cover
- To connect round duct diffuser toround duct diffuser:a = 70 mm (standard)
- To connect round duct diffuser toDIN accessories:øD = 200 - 224 : a = 75 mmøD = 250 - 355 : a = 95 mmøD = 400 - 500 : a = 115 mm
- When ordering, the a dimension must be specified. Unlessstated otherwise in the order, the connection sleeves will bedelivered with the standard a dimension of 70 mm.
outs
ide
Threaded rod on siteM8 riveting nut
Only applies to suspended installationsfrom the ceiling:prepared for suspended installation fromthe ceiling by using an M8 threaded rod tobe provided by the customer.
outs
ide
Mounting on site
straight (-EG) slanted (-EA)
Delivery and dimensions of the slanted end cover are only available upon request!End piece for mounting to round duct diffusers
Round Duct System RR-COMPLETE
01/18 - 28
Construction subject to change. No return possible!
23.08.2018Version:
connection pieces
- T-piece 90° (-ATE) to DIN EN 1506
- Y-piece (-HSE) to DIN EN 1506
- Pressed bend (-BGE) to DIN EN 1506a = 30° 45° / 90°, available up to ø 315 mm (ød1)
Bends with differ-ent degree figures will be supplied as bent segments.
- Bent segment (-BSE) to DIN EN 1506a = 15° / 30° / 45° / 60° / 90°, available from ø 355 mm (ød1)
- Symmetric reduction piece (-USE) to DIN EN1506
- Asymmetric reduction piece (-UAE)to DIN EN 1506
Technical dataFor technical data and available sizes, please refer to the techni-cal documentation "Accessories round duct system RR accessories", register 01, catalogue 1.
Legend, see page 40Order details, see page 34Specification text, see page 39
Round Duct System RR-COMPLETE
01/18 - 29
Construction subject to change. No return possible!
23.08.2018Version:
Order detailsVRA-RR
DKA-MKA-RR
RS-RR
Round volumetric flow controllerwith electric controller
VRA-RRfor round duct system RR-Complete
Accessories:
Unless stated otherwise, the thick-frame model will be delivered.
Variablevolumetric flow rate control
.........-.........(Vmin-Vmax)
Constantvolumetric flow rate control
.........(Vkons)
Operating mode0-10 V
RAL colourof your choice
NW
200 224 250 280 315 355 400 450 500
Mounting position
9 o'clock-9U
3 o'clock-3U
12 o'clock-0U
Housing made ofGalvanised sheet
steelpainted to RAL 9010
(white, standard)-St
Housing made of stainless steel 1.4301 (V2A)
-ES
Housing made ofSheet steelgalvanised
-SV
Operating mode2-10 V
Volumetric flow restrictor for round duct system RR-Complete
DKA-MKA-RR
NW
200 224 250 280 315 355 400 450 500
Accessories:
Unless stated otherwise, the thick-frame model will be delivered.
RAL colourof your choice
Mounting position
9 o'clock-9U
3 o'clock-3U
Housing made ofGalvanised sheet
steelpainted to RAL 9010
(white, standard)
Housing made of stainless steel 1.4301 (V2A)
-ES
Housing made ofSheet steelgalvanised
-SV
Duct silencer for round duct system RR-Complete
RS-RR
NW
200 224 250 280 315 355 400 450 500
Accessories:
Unless stated otherwise, the thick-frame model will be delivered.
Length 1-part
750-0750
500-0500
1000-1000
Length 2-part
1750-1750
1500-1500
2000-2000
RAL colour of your choice
Housing made ofGalvanised sheet
steelpainted to RAL 9010
(white, standard)-St
Housing made of stainless steel 1.4301 (V2A)
-ES
Housing made ofSheet steelgalvanised
-SV
Round Duct System RR-COMPLETE
01/18 - 30
Construction subject to change. No return possible!
23.08.2018Version:
DBB-RR
Supply air-Z
Round duct diffuserDBB-RR
Return air-A
with blades without blades
made of plastic
similar tocolour
RAL 9010(white)- LW
similar tocolour
RAL 9005(black)- LS
Blade adjustment options(outflow directions)
horizontalone-way
-He
horizontalon both sides
-Hb
vertical
-V
cross-wise-K
NW
200 224 250 280 315 355 400 450 500
Length 1-part
750-0750
500-0500
1000-1000
Length 2-part
1750-1750
1500-1500
2000-2000
Accessories:
Unless stated otherwise, the thick-frame model will be delivered.
RAL colour of your choice
made of alumi-num
painted
(to the RAL colourof the round duct)
- LA
Mounting position
6 o'clock-6U
3 o'clock-3U
12 o'clock-0U
9 o'clock-9U
Round duct made ofGalvanised sheet steel
painted to RAL 9010
(white, standard)-St
Round duct made of stainless steel 1.4301 (V2A)
-ES
Round duct made ofSheet steelgalvanised
-SV
with hit-and-miss damper
Rubber lip seal-GD
560 630 710 800 900
Round Duct System RR-COMPLETE
01/18 - 31
Construction subject to change. No return possible!
23.08.2018Version:
KG-RR
Round duct grilleModel KG-RR
Blade adjustment options(outflow directions)
with horizontalAir deflection blades
-8
with verticalAir deflection blades
-15
horizontalone-way
(only KG-RR-8)-He
vertical straight
-V
diverging
44°-D44
84°-D84
oppositeto one another(only KG-RR-15)
-Ge
left-li
right-re
NW
200 224 250 280 315 355 400 450 500
Length 1-part
750-0750
500-0500
1000-1000
Length 2-part
1750-1750
1500-1500
2000-2000
Mounting position
6 o'clock-6U
3 o'clock-3U
12 o'clock-0U
9 o'clock-9U
Accessories:
Unless stated otherwise, the thick-frame model will be delivered.
RAL colour of your choice
Round duct made ofGalvanised sheet steel
painted to RAL 9010
(white, standard)-St
Round duct made of stainless steel 1.4301 (V2A)
-ES
Round duct made ofSheet steelgalvanised
-SV
Height
215-215
115-115
315-315
65-065
560 630 710 800 900
Rubber lip seal-GD
Round Duct System RR-COMPLETE
01/18 - 32
Construction subject to change. No return possible!
23.08.2018Version:
DSA-RR
Round duct nozzle jet diffuserModel DSA-RR
with fixed Nozzles
-F
with manually individually adjustable nozzles
-V
NW
200 224 250 280 315 355 400 450 500
Length 1-part
750-0750
500-0500
1000-1000
Length 2-part
1750-1750
1500-1500
2000-2000
Mounting position
6 o'clock-6U
3 o'clock-3U
12 o'clock-0U
9 o'clock-9U
Accessories:
Unless stated otherwise, the thick-frame model will be delivered.
RAL colour of your choice
Nozzles made of plasticsimilar to RAL 9010 (white)
-DW
Nozzles made of plasticsimilar to RAL 9005 (black)
-DS
Nozzle rows
-1 -4from NW 400
-2from NW 200
Round duct made ofGalvanised sheet steel
painted to RAL 9010
(white, standard)-St
Round duct made of stainless steel 1.4301 (V2A)
-ES
Round duct made ofSheet steelgalvanised
-SV
560 630 710 800 900
Rubber lip seal-GD
Hit-and-miss damper-SS
Round Duct System RR-COMPLETE
01/18 - 33
Construction subject to change. No return possible!
23.08.2018Version:
WGA-V-RR
NW
200 224 250 280 315 355 400 450 500
Length 1-part
750-0750
500-0500
1000-1000
Length 2-part
1750-1750
1500-1500
2000-2000
Mounting position
6 o'clock-6U
3 o'clock-3U
12 o'clock-0U
9 o'clock-9U
Accessories:
Unless stated otherwise, the thick-frame model will be delivered.
RAL colour of your choice
Nozzles made of plasticsimilar to RAL 9010 (white)
-DW
Nozzles made of plasticsimilar to RAL 9005 (black)
-DS
Nozzle rows
-1 -2from NW 400
Long throw nozz.grille w.integ.round ductwith individually manually adjustable nozzles
WGA-V-RR
Round duct made ofGalvanised sheet steel
painted to RAL 9010
(white, standard)-St
Round duct made of stainless steel 1.4301 (V2A)
-ES
Round duct made ofSheet steelgalvanised
-SV
560 630 710 800 900
Rubber lip seal-GD
Hit-and-miss damper-SS
Round Duct System RR-COMPLETE
01/18 - 34
Construction subject to change. No return possible!
23.08.2018Version:
Accessories for round duct system RR-COMPLETE
Dummy pipe-BR
T-piece 90°-ATE
Y-piece-HSE
Rubber lip seal-GD
Connection sleeve-M
Rosette-RO
Reduction piece
symmetric-USE
asymmetric-UAE
Bend
pressed-BGE
available up to ø 315mm
segment-BSE
available from ø355
RAL colourof your choice
Accessories:
End cover
straight-EG
slanted-EA
(only available(on request)
Round Duct System RR-COMPLETE
01/18 - 35
Construction subject to change. No return possible!
23.08.2018Version:
Specification textVRA-RRVolumetric flow controller VRA-RR (supply and return air), forthe round duct system RR-COMPLETE, with electrically adjust-able round damper with integrated acoustic cladding, for spiralduct connection. For use in supply/return air systems for con-stant or variable volume flow, room or duct pressure control.With positive control Vmin, Vmax or "CLOSED". Allowed pressuredifference range: 50-1000 Pa, allowed ambient temperature 0-55°C. Suitable for use with duct velocities of 2-12 m/s. It is pos-sible to subsequently adjust the operating volumetric flows setex works. The output signal can be used for master/slave or par-allel operation of several controllers or for actual value display2-10 V DC (0-10 V DC), which corresponds to 0-100 % of theset Vmax in DDC/ZLT systems. Housing consisting of 1.0 to 1.5 mm-strong outer tube with rub-ber seal lip made of EPDM and inner tube. With integratedacoustic cladding with mineral wool filling to DIN 4102 A2 (non-flammable). With cover on both ends. Silicone-free damperblade seal made of PUR for airtight sealing (design to DIN EN1751). Measuring cross made of extruded aluminium profile,measuring cross support made of plastic (PA6), damper bear-ing made of brass. With electric controller, control voltage 24 VAC, 50 / 60 Hz, temperature compensation of 10-40°C, wiredand adjusted in factory. TÜV inspected according to VDI 6022Sheets 1+2.Product: SCHAKO type VRA-RR
Accessories (at an extra charge):
- Housing (outer tube / end cover) made of:- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Galvanised sheet steel (-SV) (at an extra charge)- Stainless steel 1.4301 (V2A) painted in the colour sand sil-
ver (-ES, at an extra charge)
- Inner tube and damper blade- Manufactured from the same material as the housing:
- Galvanised sheet steel- stainless steel 1.4301 (V2A)
- Housing leakage according to DIN EN 1751, class B, at a ductpressure of up to 1000 Pa.
- Leakage with closed damper blade according to DIN EN 1751Class 3 at a duct pressure of up to 1000 Pa.Higher requirements upon request.
- with spring return actuator (at an extra charge)- currentless "CLOSED"- currentless "OPEN"
- with high-speed actuator drive
- Mounting position- 3 o'clock (-3U, standard)- 9 o'clock (-9U)- 12 o'clock (-0U)
- a RAL colour of your choice
Round Duct System RR-COMPLETE
01/18 - 36
Construction subject to change. No return possible!
23.08.2018Version:
DKA-MKA-RRVolumetric flow restrictor DKA-MKA-RR (supply and return air),for the round duct system RR-COMPLETE, with manually ad-justable round damper with integrated acoustic cladding, forspiral duct connection. For use in supply and return air systems,for constant or variable volumetric flows. Allowed differentialpressure range: 50-1000 Pa. Allowed ambient temperatures: 0 -55°C Housing consisting of 1.0 to 1.5 mm-strong outer tube with rub-ber seal lip made of EPDM and inner tube. With integratedacoustic cladding with mineral wool filling to DIN 4102 A2 (non-flammable). With cover on both ends. Silicone-free damperblade seal made of PUR for airtight sealing (design to DIN EN1751). Measuring cross made of extruded aluminium profile,measuring cross support made of plastic (PA6), damper bear-ing made of brass. Product: SCHAKO type DKA-MKA-RR
Accessories (at an extra charge):
RS-RRDuct silencer RS-RR (supply and return air), for the round ductsystem RR-COMPLETE. With sound absorption according tothe absorption principle, by means of an annular chamber filledwith mineral wool according to DIN 4102 A2 non-flammable. Housing consisting of 1.0 to 1.5 mm-strong outer tube with rub-ber seal lip made of EPDM and inner tube made of perforatedsheet covered abrasion-resistant toward the air flow direction.With integrated acoustic cladding with mineral wool filling toDIN 4102 A2 (non-flammable). With cover on both ends. Product: SCHAKO type RS-RR
Accessories (at an extra charge):
- Housing made of:- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Galvanised sheet steel (-SV) (at an extra charge)- Stainless steel 1.4301 (V2A) painted in the colour sand sil-
ver (-ES, at an extra charge)
- Inner tube, damper blade and manual adjusting device- Manufactured from the same material as the housing:
- Galvanised sheet steel- stainless steel 1.4301 (V2A)
- Mounting position- 3 o'clock (-3U, standard)- 9 o'clock (-9U)
- a RAL colour of your choice
- Housing (outer tube / end cover) made of:- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Galvanised sheet steel (-SV) (at an extra charge)- Stainless steel 1.4301 (-V2A) painted in the colour sand
silver (-ES, at an extra charge)
- Inner tube- Manufactured from the same material as the housing:
- Galvanised sheet steel- stainless steel 1.4301 (V2A)
- Length- 1-part: 500 / 750 / 1000 (-0500/-0750/-1000)- 2-part: 1500 / 1750 / 2000 (-1500/-1750/-2000)
- a RAL colour of your choice
Round Duct System RR-COMPLETE
01/18 - 37
Construction subject to change. No return possible!
23.08.2018Version:
DBB-RRRound duct diffuser for supply air suitable for connection to DINducts. With integrated, manually adjustable air deflection bladesin support blade profile form made of plastic, similar to RAL col-our 9010 (white), RAL 9005 (black) or aluminium painted to theRAL colour of the round duct (subsequent adjustment of bladesnot possible). Sound power level and pressure loss remain con-stant in all blade positions. With integrated hit-and-miss damperfor simple air volume regulation and ductwork regulation, madeof the material the round duct is made of. Product: SCHAKO type DBB-RR-Z
Accessories (at an extra charge):
KG-RRRound duct compact grille type KG-RR for supply and return airfor connection to DIN ducts. With integrated, manually adjusta-ble hit-and-miss damper made of galvanised sheet steel orstainless steel V2A (produced of the same material as the roundpipe) for air volume regulation.
Accessories (at an extra charge):
- for return air, without air deflection bladesProduct: SCHAKO type DBB-RR-A
- Round duct made of- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Galvanised sheet steel (-SV) (at an extra charge)- Stainless steel 1.4301 (V2A) painted in the colour sand sil-
ver (-ES, at an extra charge)
- Mounting position- 3 o'clock (-3U)- 6 o'clock (-6U, standard)- 9 o'clock (-9U)- 12 o'clock (-0U)
- Blade adjustment options (throw directions)- one-way horizontal (-He)- two-way horizontal (-Hb, standard)- vertical (-V)- crosswise (-K)
- Length- 1-part: 500 / 750 / 1000 (-0500/-0750/-1000)- 2-part: 1500 / 1750 / 2000 (-1500/-1750/-2000)
- a RAL colour of your choice- Rubber lip seal (-GD)
- on both sides, made of EPDM
- With horizontal front side adjustable air deflection blades.Product: SCHAKO type KG-RR-8
- With vertical front side adjustable air deflection blades.Product: SCHAKO type KG-RR-15
- Round duct and blades made of- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Galvanised sheet steel (-SV) (at an extra charge)- Stainless steel 1.4301 (-V2A) painted in the colour sand
silver (-ES, at an extra charge)
- Mounting position- 3 o'clock (-3U)- 6 o'clock (-6U, standard)- 9 o'clock (-9U)- 12 o'clock (-0U)
- Blade adjustment options (throw directions)- one-way horizontal (-He, only KG-RR-8)
- Throw direction to the left (-li)- Throw direction to the right (-re)
- opposite to one another (-Ge, only KG-RR-15)- vertical straight (-V)- diverging
- 44° (-D44)- 84° (-D48)
- Height- 65 (-065)- 115 (-115)- 215 (-215)- 315 (-315)
- Length- 1-part: 500 / 750 / 1000 (-0500/-0750/-1000)- 2-part: 1500 / 1750 / 2000 (-1500/-1750/-2000)
- a RAL colour of your choice- Rubber lip seal (-GD)
- on both sides, made of EPDM
Round Duct System RR-COMPLETE
01/18 - 38
Construction subject to change. No return possible!
23.08.2018Version:
DSA-RRRound duct nozzle jet diffuser suitable for supply air, matchingconnection to DIN ducts. With plastic nozzles, similar to RALcolour 9010 (white, -DW) or RAL 9005 (black, -DS).
Accessories (at an extra charge):
WGA-V-RRRound duct long range grille suitable for supply air, matchingconnection to DIN-ducts. With integrated, manually adjustableplastic nozzles similar to RAL colour 9010 (white) or RAL 9005(black), pivoting range 45°. Product: SCHAKO type WGA-V-RR
Accessories (at an extra charge):
- With fixed nozzlesProduct: SCHAKO type DSA-RR-F
- With individually manually adjustable nozzles.Product: SCHAKO type DSA-RR-V
- Round duct made of- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Galvanised sheet steel (-SV) (at an extra charge)- Stainless steel 1.4301 (-V2A) painted in the colour sand
silver (-ES, at an extra charge)
- Nozzle rows- 1 (-1, standard)- 2 (-2, from NW 200)- 4 (-4, from NW 400)
- Mounting position- 3 o'clock (-3U)- 6 o'clock (-6U, standard)- 9 o'clock (-9U)- 12 o'clock (-0U)
- Length- 1-part: 500 / 750 / 1000 (-0500/-0750/-1000)- 2-part: 1500 / 1750 / 2000 (-1500/-1750/-2000)
- a RAL colour of your choice- Hit and miss damper (-SS), to regulate the air volume, pro-
duced of the same material as the round pipe- Rubber lip seal (-GD)
- on both sides, made of EPDM
- Round duct made of- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Galvanised sheet steel (-SV) (at an extra charge)- Stainless steel 1.4301 (-V2A) painted in the colour sand
silver (-ES, at an extra charge)
- Nozzle rows- 1 (-1)- 2 (-2, from NW 400)
- Mounting position- 3 o'clock (-3U)- 6 o'clock (-6U, standard)- 9 o'clock (-9U)- 12 o'clock (-0U)
- Length- 1-part: 500 / 750 / 1000 (-0500/-0750/-1000)- 2-part: 1500 / 1750 / 2000 (-1500/-1750/-2000)
- a RAL colour of your choice- Hit and miss damper (-SS), to regulate the air volume, pro-
duced of the same material as the round pipe- Rubber lip seal (-GD)
- on both sides, made of EPDM
Round Duct System RR-COMPLETE
01/18 - 39
Construction subject to change. No return possible!
23.08.2018Version:
Accessories for round duct system RR-COMPLETE
Accessories (at an extra charge):
- Dummy pipe (-BR) consisting of:- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)- Connection sleeve (-M) consisting of:
- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)- Rosette (-RO), consisting of:
- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)- End cover
- straight (-EG)- slanted (-EA), only available on requestconsisting of:
- Sheet steel painted to RAL 9010 (white)- Galvanised sheet steel- natural aluminium- Stainless steel 1.4301 (V2A) painted in the colour sand
silver- T-piece 90 ° (-ATE) consisting of:
- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)- Y-piece (-HSE) consisting of:
- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)
- Pressed bend (-BGE), available up to ø315 mm- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)- Bent segment (-BSE), available from ø355 mm
- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)- Symmetric reduction piece (-USE)
- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)- Asymmetric reduction piece (-UAE)
- Galvanised sheet steel (-SV)- Galvanised sheet steel, painted to RAL 9010 (white) (-St,
standard)- Stainless steel 1.4301 (-V2A) painted in colour sand silver
(-ES, at an extra charge)
- a RAL colour of your choice- Rubber lip seal (-GD)
- on both sides, made of EPDM
Round Duct System RR-COMPLETE
01/18 - 40
Construction subject to change. No return possible!
23.08.2018Version:
LegendV (m³/h) = Air volumeV [l/s] = Air volumeNW (mm) = Nominal widthv min (m/s) = min. velocityv max (m/s) = max. velocityP (mm) = Packing thicknessL (mm) = LengthNW (mm) = Nominal widthρ (kg/m3) = DensityΔpW (Pa) = Differential pressure
Round Duct System RR-COMPLETE
01/18 - 41
Construction subject to change. No return possible!
23.08.2018Version:
Installation, Mounting and MaintenanceMounting position
The duct silencer RS-RR can be used independently of the installation situation.
3 o'clock (-3U) 6 o'clock (-6U) 9 o'clock (-9U) 12 o'clock (-0U)VRA-RR
Standard
---
DKA-MKA-RR
Standard
--- ---
DBB-RR
StandardModel KG-RR
StandardModel DSA-RR
StandardWGA-V-RR
Standard
Installation positionPlease note that for vertical throw a distance of at least 100 mm must be available be-tween the weld seam and the diffuser. This means that the weld seam must be offset ac-cordingly.
Installation VRA-RR-ESee SCHAKO technical docu-mentation VRA
MountingThe duct system must be mounted by skilled personnel using suitable and approved suspension material.
MaintenanceMaintenance can be carried out by removing individual duct segments.