General Information
Actuators
Air Power & Hydraulics manufactures a range of semi-
rotary actuators under the Torko brand. Available in carbon, stainless steel, and alloy materials, they are ideal
for industrial marine & subsea use and in applications
where high strength, corrosion resistance or hygiene are paramount factors. Load holding valves and end of stroke
cushioning are available.
The robust rack and pinion design of Torko semi-rotary
actuators provides constant torque drives in situations where large rotational angles and small envelope
dimensions make cylinders and linkage mechanisms impractical. Torko actuators are available for any degree
of rotation.
Principal features on Torko actuators include full
length rack bearing, heavy duty bronze pinion bearings, +/- 2.5º angular adjustment at the end of each stroke,
female drive pinion bores and keyways and 210 bar working pressure. The range embraces 10 sizes with
output torques from 1Nm/bar to 444 Nm/bar . All actuators are supplied with nitrile seals for mineral oil,
water/glycol, water in oil emulsions and HWB fluids, as
standard. T orko subsea actuators have additional seals and body drain port or compensator with relief
valve, depending on the hydraulic system.
Clients may choose between intermediate angles of rotation, multiturn actuators and spring return fail safe
units. Alternative mounting styles to suit customer specifications include spigot location and male output
shafts. Other options include pneumatic seals, end of
rotation cushioning, seals for phosphate esters and other special fluids. Special materials, such as 316 stainless steel
can be supplied. In addition, continuous electronic rotational feedback via potentiometers and transmitters
is available.
We recommend the installation of a dual overcentre valve
close to the actuator service ports to avoid shock loads being applied to the actuator end stops where load
runaway occurs. When this is a possibility, the relief valve should be set to reflect load conditions to a maximum of
210 bar.
The Torkam is a new generation camera pan and tilt
actuator unit for underwater ROV’s. The design eliminates trailing electrical cables from the base actuator
to the camera actuator , requires no drain line and
provides the user with a single non-moving interface for all connections. Output torque is 0.7 Nm/bar.
TOR-GEN
Subsea and industrial hydraulic manufacturers
Hillington Park Glasgow G52 4PQ Scotland Tel: 0141 810 4511 Fax: 0141 883 3825
Email: [email protected] Internet: www.aph.co.uk
Represented in USA by: Air Power Hydraulics Inc 87 Amlajack Way Newnan GA 30265 Tel: 770 683 7221 Fax: 770 683 7242 E: [email protected] Web: www.aphusa.com
Torkam Pan & Tilt Unit
G1
TORKO ROTARY ACTUATORS
GENERAL INFORMATION
Hillington Park, Glasgow, G52 4PQ, Scotland Tel: 0141 810 4511 - Fax: 0141 883 3825
Email: [email protected] - Website: www.aph.co.uk
G1
Models 18S and 28S
ITEM DESCRIPTION ITEM DESCRIPTION
1 ACTUATOR BODY 10 RETAINING SCREW
2 MOUNTING PAD *11 PISTON SEAL
3 CYLINDER BODY *12 END CAP SEAL
4 END CAP 13 GREASE NIPPLE
5 PISTON 14 ADJUSTMENT SCREW
6 RACK 15 LOCK NUT
7 PINION *16 SEALING WASHER
8 FLANGED BEARING 17 DOME NUT
9 PLAIN BEARING * Seal kit items
TOR-18S-28S-SEC
Subsea and industrial hydraulic manufacturers
Hillington Park Glasgow G52 4PQ Scotland Tel: 0141 810 4511 Fax: 0141 883 3825
Email: [email protected] Internet: www.aph.co.uk
Represented in USA by: Air Power Hydraulics Inc 87 Amlajack Way Newnan GA 30265
Tel: 770 683 7221 Fax: 770 683 7242 E: [email protected] Web: www.aphusa.com
6 3 11 5 12 4
15 17
14 16
10
13 2
KEYWAY SHOWN IN MID-POSITION
G2
TORKO ROTARY ACTUATORS
ACTUATOR SECTION
MODEL 18S & 28S
Hillington Park, Glasgow, G52 4PQ, Scotland Tel: 0141 810 4511 - Fax: 0141 883 3825
Email: [email protected] - Website: www.aph.co.uk
G2
13
10
14 16
KEYWAY SHOWN IN MID-POSITION
Models 18D and 28D
6 3 11 5 12 4 15 17
2 2 4 4 4 4 4 4
ITEM DESCRIPTION ITEM DESCRIPTION
1 ACTUATOR BODY 10 RETAINING SCREW
2 MOUNTING PAD *11 PISTON SEAL
3 CYLINDER BODY *12 END CAP SEAL
4 END CAP 13 GREASE NIPPLE
5 PISTON 14 ADJUSTMENT SCREW
6 RACK 15 LOCK NUT
7 PINION *16 SEALING WASHER
8 FLANGED BEARING 17 DOME NUT
9 PLAIN BEARING * Seal kit items
TOR-18D-28D-SEC
Subsea and industrial hydraulic manufacturers
Hillington Park Glasgow G52 4PQ Scotland Tel: 0141 810 4511 Fax: 0141 883 3825
Email: [email protected] Internet: www.aph.co.uk
Represented in USA by: Air Power Hydraulics Inc 87 Amlajack Way Newnan GA 30265
Tel: 770 683 7221 Fax: 770 683 7242 E: [email protected] Web: www.aphusa.com
G3
TORKO ROTARY ACTUATORS
ACTUATOR SECTION MODEL 18D & 28D
Hillington Park, Glasgow, G52 4PQ, Scotland Tel: 0141 810 4511 - Fax: 0141 883 3825
Email: [email protected] - Website: www.aph.co.uk
G3
Output Torque 1Nm/Bar
MATERIAL SPECIFICATIONS
RACK BAR ALUMINIUM BRONZE TO CA 104 (DGS 1043)
PINION STAINLESS STEEL TO BS970 431S29-‘ T’
BODY, PISTONS & END CAPS
CARBON STEEL TO BS 970 070M20
BEARINGS PHOSPHOR BRONZE TO BS 1400 PBI- C
SEALS NITRILE RUBBER WITH ACETAL RESIN WEAR RINGS AND ANTI-EXTRUSION RINGS
Fail-safe spring-return for valve operation, subsea duty,
alternative angles of rotation, alternative mounting styles,
male output shafts, pneumatic seals, seals for special fluids,
fixed cushioning
Actuators in Stainless Steel and alloy materials
TOR-18S-25
Subsea and industrial hydraulic manufacturers
Hillington Park Glasgow G52 4PQ Scotland Tel: 0141 810 4511 Fax: 0141 883 3825
Email: [email protected] Internet: www.aph.co.uk
Represented in USA by: Air Power Hydraulics Inc 87 Amlajack Way Newnan GA 30265
Tel: 770 683 7221 Fax: 770 683 7242 E: [email protected] Web: www.aphusa.com
210 30
198
143 CRS 27 1/4” BSP.P PORTS
42
Ø60
114
6mm SQ. KEY
2 HOLES Ø 12.7 THRO’ FOR M12 CAPSCREWS
G4
Ø20
25
76.2
TORKO ROTARY ACTUATORS
MODEL 18S-25 OUTPUT TORQUE 1NM/BAR
Hillington Park, Glasgow, G52 4PQ, Scotland Tel: 0141 810 4511 - Fax: 0141 883 3825
Email: [email protected] - Website: www.aph.co.uk
G4
Model 18S Output Torque 2.6Nm/bar WP 210 bar
TOTAL ANGULAR ROTATION DEGREES ( º)
90º 180º 270º 360º
L 406 533 660 787
L/2 203 266.5 330 393.5
DISPL (cc) 52 104 156 208
WEIGHT (Kg) 6 6.75 7.5 8.25
1 bar = 14.5lbf/in2 1Nm = 8.85lbf.in Above data based on ISO grade 32 mineral oil at 40ºC
Fail-safe spring-return for valve operation, subsea duty, intermediate angles of rotation, alternative mounting styles,
male output shafts, pneumatic seals, seals for special fluids,
fixed cushioning.
Actuators in stainless steel and alloy materials
TOR-18S
Subsea and industrial hydraulic manufacturers
Hillington Park Glasgow G52 4PQ Scotland Tel: 0141 810 4511 Fax: 0141 883 3825
Email: [email protected] Internet: www.aph.co.uk
Represented in USA by: Air Power Hydraulics Inc 87 Amlajack Way Newnan GA 30265 Tel: 770 683 7221 Fax: 770 683 7242 E: [email protected] Web: www.aphusa.com
(60 FOR
Ø38
47 1/4 BSP.P 47
±2.5º PER END
4 HOLES TAPPED M10 X 1.5
Ø50 MAX & KEYWAY
LUBRICATOR
G5
32
55
50
130
TORKO ROTARY ACTUATORS
MODEL 18S OUTPUT TORQUE 2.6NM/BAR WP 210 BAR
Hillington Park, Glasgow, G52 4PQ, Scotland Tel: 0141 810 4511 - Fax: 0141 883 3825
Email: [email protected] - Website: www.aph.co.uk
G5
Model 18D Output Torque 5.2Nm/bar WP 210 bar
TOTAL ANGULAR ROTATION DEGREES ( º)
90º 180º 270º 360º
L 350 477 604 731
L/2 175 238.5 302 365.5
DISPL (cc) 104 208 312 416
WEIGHT (Kg) 9.5 11 12.5 14
1 bar = 14.5lbf/in2 1Nm = 8.85lbf.in Above data based on ISO grade 32 mineral oil at 40ºC
Fail-safe spring-return for valve operation, subsea duty, intermediate angles of rotation, alternative mounting styles,
male output shafts, pneumatic seals, seals for special fluids,
fixed cushioning.
Actuators in stainless steel and alloy materials
TOR-18D
Subsea and industrial hydraulic manufacturers
Hillington Park Glasgow G52 4PQ Scotland Tel: 0141 810 4511 Fax: 0141 883 3825
Email: [email protected] Internet: www.aph.co.uk
Represented in USA by: Air Power Hydraulics Inc 87 Amlajack Way Newnan GA 30265 Tel: 770 683 7221 Fax: 770 683 7242 E: [email protected] Web: www.aphusa.com
G6
Ø38
(60 FOR SUBSEA
±2.5º PER END
4 HOLES TAPPED M12 X 1.5
LUBRICATOR
Ø50 MAX & KEYWAY
32
25
50
50
150
TORKO ROTARY ACTUATORS
MODEL 18D OUTPUT TORQUE 5.2NM/BAR WP 210 BAR
Hillington Park, Glasgow, G52 4PQ, Scotland Tel: 0141 810 4511 - Fax: 0141 883 3825
Email: [email protected] - Website: www.aph.co.uk
G6
Output Torque 5Nm/bar WP 210 bar
TOTAL ANGULAR ROTATION DEGREES ( º)
90º 180º 270º 360º
L 472 622 772 922
L/2 236 311 386 461
DISPL (cc) 94 188 282 376
WEIGHT (Kg) 12 13 14 15
1 bar = 14.5lbf/in2 1Nm = 8.85lbf.in Above data based on ISO grade 32 mineral oil at 40ºC
Fail-safe spring-return for valve operation, subsea duty, intermediate angles of rotation, alternative mounting styles,
male output shafts, pneumatic seals, seals for special fluids, fixed cushioning.
Actuators in stainless steel and alloy materials
TOR-24S
Subsea and industrial hydraulic manufacturers
Hillington Park Glasgow G52 4PQ Scotland Tel: 0141 810 4511 Fax: 0141 883 3825
Email: [email protected] Internet: www.aph.co.uk
Represented in USA by: Air Power Hydraulics Inc 87 Amlajack Way Newnan GA 30265 Tel: 770 683 7221 Fax: 770 683 7242 E: [email protected] Web: www.aphusa.com
L/2
63
Ø50
(75 FOR SUBSEA
±2.5º PER END
4 HOLESTAPPED
M12 X 1.75
LUBRICATOR
Ø60 MAX & KEYWAY
G7
30
64
54.5
150
TORKO ROTARY ACTUATORS
MODEL 24S
OUTPUT TORQUE 5NM/BAR WP 210 BAR
Hillington Park, Glasgow, G52 4PQ, Scotland Tel: 0141 810 4511 - Fax: 0141 883 3825
Email: [email protected] - Website: www.aph.co.uk
G7
Model 28S Output Torque 12.8Nm/bar WP 210 bar
TOTAL ANGULAR ROTATION DEGREES ( º)
90º 180º 270º 360º
L 565 731 897 1063
L/2 282.5 365.5 448.5 531.5
DISPL (cc) 263 526 789 1052
WEIGHT (Kg) 28 31 34 37
1 bar = 14.5lbf/in2 1Nm = 8.85lbf.in Above data based on ISO grade 32 mineral oil at 40ºC
Fail-safe spring-return for valve operation, subsea duty, intermediate angles of rotation, alternative mounting styles,
male output shafts, pneumatic seals, seals for special fluids,
fixed cushioning.
Actuators in stainless steel and alloy materials
TOR-28S
Subsea and industrial hydraulic manufacturers
Hillington Park Glasgow G52 4PQ Scotland Tel: 0141 810 4511 Fax: 0141 883 3825
Email: [email protected] Internet: www.aph.co.uk
Represented in USA by: Air Power Hydraulics Inc 87 Amlajack Way Newnan GA 30265 Tel: 770 683 7221 Fax: 770 683 7242 E: [email protected] Web: www.aphusa.com
G8
L/2
(110 FOR SUBSEA
Ø76
±2.5º PER END
4 HOLES
LUBRICATOR
Ø60 MAX & KEYWAY
35
68
74
190
TORKO ROTARY ACTUATORS
MODEL 28S OUTPUT TORQUE 12.8NM/BAR WP 210 BAR
Hillington Park, Glasgow, G52 4PQ, Scotland Tel: 0141 810 4511 - Fax: 0141 883 3825
Email: [email protected] - Website: www.aph.co.uk
G8
Model 28D Output Torque 25.6Nm/bar WP 210 bar
TOTAL ANGULAR ROTATION DEGREES ( º)
90º 180º 270º 360º
L 491 657 823 989
L/2 245.5 328.5 411.5 494.5
DISPL (cc) 526 1052 1578 2104
WEIGHT (Kg) 40 46 52 58
1 bar = 14.5lbf/in2 1Nm = 8.85lbf.in Above data based on ISO grade 32 mineral oil at 40ºC
Fail-safe spring-return for valve operation, subsea duty, intermediate angles of rotation, alternative mounting styles,
male output shafts, pneumatic seals, seals for special fluids,
fixed cushioning.
Actuators in stainless steel and alloy materials
TOR-28D
Subsea and industrial hydraulic manufacturers
Hillington Park Glasgow G52 4PQ Scotland Tel: 0141 810 4511 Fax: 0141 883 3825
Email: [email protected] Internet: www.aph.co.uk
Represented in USA by: Air Power Hydraulics Inc 87 Amlajack Way Newnan GA 30265 Tel: 770 683 7221 Fax: 770 683 7242 E: [email protected] Web: www.aphusa.com
100
Ø76 (110 FOR SUBSEA
±2.5º PER END
4 HOLES TAPPED M20 X 2.5
LUBRICATOR
Ø60 MAX & KEYWAY
G9
35
47.5
74
74
243
TORKO ROTARY ACTUATORS
MODEL 28D OUTPUT TORQUE 25.6NM/BAR WP 210
Hillington Park, Glasgow, G52 4PQ, Scotland Tel: 0141 810 4511 - Fax: 0141 883 3825
Email: [email protected] - Website: www.aph.co.uk
G9
Output Torque 54Nm/bar WP 210 bar
TOTAL ANGULAR ROTATION DEGREES ( º)
90º 180º 270º 360º
L 862 1128 1394 1660
L/2 431 564 697 830
DISPL (cc) 1045 2090 3135 4180
WEIGHT (Kg) 90 100 110 120
1 bar = 14.5lbf/in2 1Nm = 8.85lbf.in Above data based on ISO grade 32 mineral oil at 40ºC
Fail-safe spring-return for valve operation, subsea duty, intermediate angles of rotation, alternative mounting styles,
male output shafts, pneumatic seals, seals for special fluids, fixed cushioning.
TOR-48S
Subsea and industrial hydraulic manufacturers
Hillington Park Glasgow G52 4PQ Scotland Tel: 0141 810 4511 Fax: 0141 883 3825
Email: [email protected] Internet: www.aph.co.uk
Represented in USA by: Air Power Hydraulics Inc 87 Amlajack Way Newnan GA 30265 Tel: 770 683 7221 Fax: 770 683 7242 E: [email protected] Web: www.aphusa.com
G10
150
Ø115
L/2
±2.5º PER END
4 HOLES TAPPED M20 X 2.5
310
Ø75 MAX & KEYWAY
LUBRICATOR
40
20
Ø90
127
100
Ø228 298
TORKO ROTARY ACTUATORS
MODEL 48S OUTPUT TORQUE 54NM/BAR WP 210 BAR
Hillington Park, Glasgow, G52 4PQ, Scotland Tel: 0141 810 4511 - Fax: 0141 883 3825
Email: [email protected] - Website: www.aph.co.uk
G10
TOTAL ANGULAR ROTATION DEGREES ( º)
90º 180º 270º 360º
L 1082 1562 2042 2522
L/2 541 781 1021 1261
DISPL (cc) 2952 5904 8856 11808
WEIGHT (Kg) 330 363 396 429
1 Bar = 14.5lbf/in2 1Nm = 8.85lbf.in Above Data Based on ISO Grade 32 Mineral Oil at 40ºC.
TOR-52S
Subsea and industrial hydraulic manufacturers
Hillington Park Glasgow G52 4PQ Scotland Tel: 0141 810 4511 Fax: 0141 883 3825
Email: [email protected] Internet: www.aph.co.uk
Represented in USA by: Air Power Hydraulics Inc 87 Amlajack Way Newnan GA 30265 Tel: 770 683 7221 Fax: 770 683 7242 E: [email protected] Web: www.aphusa.com
• Fail-safe spring-return for valve operation • Electronic position indication • Subsea duty • Intermediate angles of rotation • Alternative mounting styles • Male output shafts • Pneumatic seals • Seals for special fluids • Fixed cushioning
G14
80 80
L/2 L/2
RELIEF
±2.5º PER END Ø145
2 PORTS 1/2” BSP VALVE 20
HOLES Ø50
20
400
Ø110
100
CR
S
225
174
101
Ø384
.95 –.
10
BO
TH
SID
ES
500
TORKO ROTARY ACTUATORS
MODEL 52S
OUTPUT TORQUE 155NM/BAR WP 210 BAR
Hillington Park, Glasgow, G52 4PQ, Scotland Tel: 0141 810 4511 - Fax: 0141 883 3825
Email: [email protected] - Website: www.aph.co.uk
G14
TOTAL ANGULAR ROTATION DEGREES ( º)
90º 180º 270º 360º
L 1082 1562 2042 2522
L/2 541 781 1021 1261
DISPL (cc) 5904 11808 17712 23616
WEIGHT (Kg) 460 526 592 658
1 Bar = 14.5lbf/in2 1Nm = 8.85lbf.in Above Data Based on ISO Grade 32 Mineral Oil at 40ºC.
TOR-52D
Subsea and industrial hydraulic manufacturers
Hillington Park Glasgow G52 4PQ Scotland Tel: 0141 810 4511 Fax: 0141 883 3825
Email: [email protected] Internet: www.aph.co.uk
Represented in USA by: Air Power Hydraulics Inc 87 Amlajack Way Newnan GA 30265 Tel: 770 683 7221 Fax: 770 683 7242 E: [email protected] Web: www.aphusa.com
• Fail-safe spring-return for valve operation • Electronic position indication • Subsea duty • Intermediate angles of rotation • Alternative mounting styles • Male output shafts • Pneumatic seals • Seals for special fluids • Fixed cushioning
L 80 240
200
L/2 L/2
±2.5º PER END Ø145
2 PORTS 1/2” BSP
VALVE 20
HOLES Ø50
20
400
G15
100
CR
S
Ø110
101
174
174
101
Ø384.9
5 –.
10
BO
TH
SID
ES
550
TORKO ROTARY ACTUATORS
MODEL 52D OUTPUT TORQUE 310NM/BAR WP 210 BAR
Hillington Park, Glasgow, G52 4PQ, Scotland Tel: 0141 810 4511 - Fax: 0141 883 3825
Email: [email protected] - Website: www.aph.co.uk
G15
Model 63S Output Torque 222Nm/bar WP 210 bar
TOTAL ANGULAR ROTATION DEGREES ( º)
90º 180º 270º 360º
L 1214 1692 2170 2648
L/2 607 846 1085 1324
DISPL (cc) 4367 8734 13101 17468
WEIGHT (Kg) 230 266 302 338
1 bar = 14.5lbf/in2 1Nm = 8.85lbf.in Above data based on ISO grade 32 mineral oil at 40ºC
Fail-safe spring-return for valve operation, subsea duty, intermediate angles of rotation, alternative mounting styles,
male output shafts, pneumatic seals, seals for special fluids,
fixed cushioning.
TOR-63S
Subsea and industrial hydraulic manufacturers
Hillington Park Glasgow G52 4PQ Scotland Tel: 0141 810 4511 Fax: 0141 883 3825
Email: [email protected] Internet: www.aph.co.uk
Represented in USA by: Air Power Hydraulics Inc 87 Amlajack Way Newnan GA 30265 Tel: 770 683 7221 Fax: 770 683 7242 E: [email protected] Web: www.aphusa.com
G11
2 PORTS
Ø171
PER END
HOLES Ø35
400
Ø150 MAX & KEYWAY 40 WIDE x 150 LONG
ALTERNATIVE MALE OUTPUT
SHAFT Ø150MAX & KEYWAY
100
160
Ø110
212
174
SPIG
OT Ø
385
(H8)
(BO
TH
SID
ES)
497
TORKO ROTARY ACTUATORS
MODEL 63S OUTPUT TORQUE 222NM/BAR WP 210 BAR
Hillington Park, Glasgow, G52 4PQ, Scotland Tel: 0141 810 4511 - Fax: 0141 883 3825
Email: [email protected] - Website: www.aph.co.uk
G11
Model 63D Output Torque 444Nm/bar WP 210 bar
TOTAL ANGULAR ROTATION DEGREES ( º)
90º 180º 270º 360º
L 1054 1532 2010 2488
L/2 527 766 1005 1244
DISPL (cc) 8734 17468 26202 34936
WEIGHT (Kg) 366 438 510 582
1 bar = 14.5lbf/in2 1Nm = 8.85lbf.in Above data based on ISO grade 32 mineral oil at 40ºC
Fail-safe spring-return for valve operation, subsea duty, intermediate angles of rotation, alternative mounting styles,
male output shafts, pneumatic seals, seals for special fluids,
fixed cushioning.
TOR-63D
Subsea and industrial hydraulic manufacturers
Hillington Park Glasgow G52 4PQ Scotland Tel: 0141 810 4511 Fax: 0141 883 3825
Email: [email protected] Internet: www.aph.co.uk
Represented in USA by: Air Power Hydraulics Inc 87 Amlajack Way Newnan GA 30265 Tel: 770 683 7221 Fax: 770 683 7242 E: [email protected] Web: www.aphusa.com
G12
±2.5º PER END
240
200
Ø171
HOLES Ø50
4 PORTS
& DOUBLE KEYWAY 40 WIDE x 150 LONG
ALTERNATIVE MALE OUTPUT
SHAFT Ø150 MAX &DOUBLE KEYWAY
100
Ø110
285
174
SPIG
OT Ø
385
(H8)
(BO
TH
SID
ES)
570
TORKO ROTARY ACTUATORS
MODEL 63D
OUTPUT TORQUE 444NM/BAR WP 210 BAR
Hillington Park, Glasgow, G52 4PQ, Scotland Tel: 0141 810 4511 - Fax: 0141 883 3825
Email: [email protected] - Website: www.aph.co.uk
G12
TOTAL ANGULAR ROTATION DEGREES ( º)
90º 180º 270º 360º
L 1280 1838 2396 2856
L/2 640 919 1198 1428
DISPL (cc) 7600 15200 22800 30400
WEIGHT (Kg) 695 760 825 895
1 Bar = 14.5lbf/in2 1Nm = 8.85lbf.in Above Data Based on ISO Grade 32 Mineral Oil at 40ºC.
TOR-75S
Subsea and industrial hydraulic manufacturers
Hillington Park Glasgow G52 4PQ Scotland Tel: 0141 810 4511 Fax: 0141 883 3825
Email: [email protected] Internet: www.aph.co.uk
Represented in USA by: Air Power Hydraulics Inc 87 Amlajack Way Newnan GA 30265 Tel: 770 683 7221 Fax: 770 683 7242 E: [email protected] Web: www.aphusa.com
• Fail-safe spring-return for valve operation • Electronic position indication • Subsea duty • Intermediate angles of rotation • Alternative mounting styles • Male output shafts • Pneumatic seals • Seals for special fluids • Fixed cushioning
G16
83
L/2 L/2
300
250
Ø210
2 PORTS
VALVE 25
±2.5º PER END
HOLES Ø56
450
SINGLE KEYWAY 45
100
CR
S
Ø125
250
199.4
0
SPIG
OT Ø
430 (H
8)
( BO
TH
SID
ES
)
580
TORKO ROTARY ACTUATORS
MODEL 75S OUTPUT TORQUE 375NM/BAR WP 210 BAR
Hillington Park, Glasgow, G52 4PQ, Scotland Tel: 0141 810 4511 - Fax: 0141 883 3825
Email: [email protected] - Website: www.aph.co.uk
G16
TOTAL ANGULAR ROTATION DEGREES ( º)
90º 180º 270º 360º
L 1280 1838 2396 2856
L/2 640 919 1198 1428
DISPL (cc) 15200 30400 45600 60800
WEIGHT (Kg) 810 947 1084 1220
1 Bar = 14.5lbf/in2 1Nm = 8.85lbf.in Above Data Based on ISO Grade 32 Mineral Oil at 40ºC.
TOR-75D
Subsea and industrial hydraulic manufacturers
Hillington Park Glasgow G52 4PQ Scotland Tel: 0141 810 4511 Fax: 0141 883 3825
Email: [email protected] Internet: www.aph.co.uk
Represented in USA by: Air Power Hydraulics Inc 87 Amlajack Way Newnan GA 30265 Tel: 770 683 7221 Fax: 770 683 7242 E: [email protected] Web: www.aphusa.com
• Fail-safe spring-return for valve operation • Electronic position indication • Subsea duty • Intermediate angles of rotation • Alternative mounting styles • Male output shafts • Pneumatic seals • Seals for special fluids • Fixed cushioning
G17
83
300
250
Ø210
2 PORTS
VALVE
25 ±2.5º PER END
HOLES Ø56
450
25
100
CR
S
Ø125
330
199.4
0
SPIG
OT Ø
430 (H
8)
( BO
TH
SID
ES
)
660
TORKO ROTARY ACTUATORS
MODEL 75D OUTPUT TORQUE 750NM/BAR WP 210 BAR
Hillington Park, Glasgow, G52 4PQ, Scotland Tel: 0141 810 4511 - Fax: 0141 883 3825
Email: [email protected] - Website: www.aph.co.uk
G17
Features
Rotation 300º Pan, 120º Tilt Displacement 33.5cc Pan, 14.1 cc Tilt
Torque 0.7Nm/bar both axes Pressure 200 bar maximum
Weight 5Kg in water Dry weight 7Kg
Facility to route 1 or 2 electrical cables each with 15.5mm
diameter plug and up to 8 contacts through the hollow
body to minimise snagging during operation. No drain
line required. No depth limitation. T win drive flanges
allow for various configurations of mounting brackets for
cameras and lights. Optional built in flow restrictors.
TORKAM
Hillington Park Glasgow G52 4PQ Scotland Tel: 0141
Specification
300º
150
10 10 120º TION 4 HOLES Ø6 ON
52 PCD FOR CAMERA MOUNTING BRACKETS
120
190 86
100
CAMERA & LIGHT CABLE ENTRIES (4 OFF)
CABLE EXIT (2 OFF) 22 X 16
4 OFF MOUNTING HOLES Ø8.2
4 PORTS 1/8” NPT
BLEED PORTS (4 OFF) M4
TORKAM
Pan & Tilt Unit Specification
118
141
Ø63.5
100
230.7
5
05 02
150
199
TORKO PAN & TILT UNIT
SPECIFICATION
Hillington Park, Glasgow, G52 4PQ, Scotland Tel: 0141 810 4511 - Fax: 0141 883 3825
Email: [email protected] - Website: www.aph.co.uk
G13