FLOORING TECHNOLOGY
MACHINES AND TOOLS
FLOORING PROFILES
Wir bringen Bewegung ins Werkzeug
Catalogue 1 6.28
Roll GmbH is a leading special ist in the manufacture of machines and toolsfor the preparation of subsurface and thus offers its partners a ful l range oftools for instal lation and handling of spackle, screed, parquet, l inoleum, PVCand carpet. Furthermore a large assortment of different flooring profi les isoffered for a wide range of applications.
Roll GmbH also is the Roll family and their dedicated team which works withpassion for the flooring technology for more than 30 years. Since thecompany was founded by Dieter and Rosemarie Roll , mile stones were set inthe flooring industry e.g. the Bullystripper (1 980) or the use of hard metalcomponents for the preparation of subsurface in the form of the patentedRoll-Rotorscraper (1 983).
„We not only want to satisfy our customers, we want to fascinate them“this is what the sibl ings Beatrice, Stephan and André Roll clearly want toexpress. This works best with products which convince and furthermore witha remarkable service, these two features make the Roll GmbH successful lyal l over the world.
The Roll-Stripper-FamilyThe story around the Roll-Stripper goes on. In 201 3 the ROLL-STRIPPER(RO-1 ) was presented at the BAU in Munich for the first time. The ROLL-STRIPPER (RO-1 ) is an innovative floor scraper, which was developed forthe removal of al l extremely bonded floor coverings. Very compact and yetvery powerful the ROLL-STRIPPER closes the gap between the self-propelled floor removal machines and the large and heavy Ride-on floorscrapers.
Based on this technology a further model, the Roll-Stripper RO-2 wasdeveloped, first presented at the BAU 201 5. With this machine, the RollGmbH offers a complete stripper family!
A look into the futureAt the Domotex 201 6, the new floor grinding machine RO-300 was introduced(page 1 2), which strengthened the company's position in the field ofequipment for the renovation and surface preparation.In the range of flooring profi les new system profi les (from page 81 ) for lvtfloor coverings and parquet were presented. In this catalogue you can find acompetitive overal l range for the flooring professional!
However, a key foundation for the future was in 201 5, the construction of thenew warehouse. With a higher storage capacity and above all through thedevelopment of the assembly l ine the ROLL brand can continue to grow.
ROLL GmbH | Company profile
Michael DorowSales regions:Baden-Württemberg, Saarland,Rhineland-Palatinate, Hesse
Mobile: 01 62/91 66607Phone: 071 28/92 80-1 6Email : [email protected]
Armin-Georg JaschikSales regions:Lower Saxony, Schleswig-Holstein,Hamburg, Bremen, Berl in
Mobile: 01 51 /1 5337427Phone: 071 28/92 80-0Email : armin. [email protected]
Daniel HermannSales region Bavaria
Mobile: 01 62/52111 99Phone: 071 28/92 80-0Email : [email protected]
André RollSales Director
Mobile: 01 62/91 66605Phone: 071 28/92 80-24Email : andre.rol [email protected]
Rudolf GlessmannArea Sales Manager Eastern Europe
Mobile: 01 62/21111 92Phone: 071 28/92 80-1 2Email : [email protected]
Rudolf
André
Michael
Armin
Daniel
Your personal contact!
Maik Oliver KolcanSales region North Rhine-Westphalia
Mobile: 01 62/1 55511 3Phone: 071 28/92 80-0Email : [email protected]
Maik
Categories
1 ROLL Single disc machinesSingle disc machines, vacuum system, special discs, abrasives, l iquid tank, cable, current l imiter
02 - 11
2 ROLL Floor grinding machinesFloor grinding machines, accessories
3 ROLL Parquet sanding machinesParquet sanding machine Woody, accessories
4 ROLL Hand grinding machinesHand grinding machines, accessories
6 ROLL Stripper machines and acccessories for removing floor coveringsROLL Stripper RO-1 , RO-2, ramps, Bullystripper, E-Cut, scrapers, grinding stones
7 Installation toolsLinoleum and PVC instal lation tools, Leister hot air tools, pressure rol lers, cold welding l iquid, carpet instal lation tools, parquet instal lation tools,spatulas, spreading knifes, rol lers
8 Measuring instrumentsCCM moisture measuring instrument, handheld measuring instruments
9 AbrasivesAbrasives for single disc machines, parquet sanding machines, edge sanders
1 0 Cutting toolsBlades, knifes, scissors, cutters
11 Mixing toolsMixers and mixing rods
1 2 Assembly accessoriesAnti sl ipping grip tapes, spray adhesive, assembly adhesive, cartridge pistol, 2-components adhesive, steel nails
1 3 General work equipmentKnee pads, dust masks
1 4 ChairmatsPolycarbonate chairmats with and without spikes
1 5 Profiles with punching
1 6 Cover strips
1 7 Edge trims
1 8 Edge trims for parquet
1 9 System profiles for screwing
20 Stair nosings and angle edges
5 Vacuum cleanersIndustrial vacuum cleaners, dust separators, fi l ters, dust bagds
21 Stairrods and accessories
22 Metal angles
23 Mounting accessories
1 2 - 1 3
1 4 - 1 5
1 6 - 1 9
20 - 21
22 - 27
28 - 44
45 - 46
47 - 50
51 - 54
55
56 - 57
58
59
62 - 64
65 - 73
74 - 78
79 - 80
81 - 86
87 - 1 03
1 04
1 05
1 07
ROLL Single disc machines
02
Strengthened handle
Professional drawbarwith wide handlesin a closed design
Robust handle bar
Solid aluminium square tubeCapacitors box
easily accessiblecapacitors box
Plug connection
Industrial version
Transport
Easy removal of the drawbar
Vacuum system
Preparation for the ROLL vacuum systemfor dust free work
Motor cover
Motor cover made of steel
Rubber ring
To avoid damage when working along the wall
Machine housing
Reinforced aluminium machine housing
Cable
1 0m light connection cableleaves no traces of abrasion
Wheels
Big transport wheelsfor easy transport
Drawbar joint
Drawbar joint as high-strengthened construction(only with RO-3000)
Additional socket
Socket for connection ofadditional equipment(only with RO-3000)
Made by ROLLSingle disc technology is a sophisticated concept of thebrand ROLL.
Universal useAbout 25 special discs and accessories.
High qualityProfessional machines with quality components.
Dust free workWith intel l igent vacuum technology from ROLL.
03
ROLL Single disc machines
Single disc machine RO-3000Application: designed for heavy duty applications, high rotation with high areaefficiency and for permanent use, suitable for al l ROLL special discs.
Technical specifications:Working power: 3000WRotation: 280 rpmWeight: 55,0kgWorking width: 400mm
Pre-instal led for ROLL vacuum system
Recommended use with current l imiter 1 9.1 4925.
1 9.1 61 50
Single disc machine RO-1 800Application: universal machine for al l sub-floor works with al l ROLL special discs, aswell as for cleaning and maintenance.
Technical specifications:Working power: 1 800WRotation: 1 50 rpmWeight: 40,0kgWorking width: 400mm
Pre-instal led for ROLL vacuum system
1 9.1 61 00
Single disc machine RO-2200Application: universal machine, when you need a machine with high area efficiencyand for permanent use, for al l sub-floor works with al l ROLL special discs.
Technical specifications:Working power: 2200WRotation: 1 95 rpmWeight: 48,0kgWorking width: 400mm
Pre-instal led for ROLL vacuum system
1 9.1 61 65
1 9.1 421 0
54.001 55
Vacuum system for ROLL Single disc machines
04
Made by ROLLSingle disc technology is a sophisticated concept of thebrand ROLL
Universal fitFor al l ROLL single disc machines and different heightsof special discs
Low wall distanceApproximately 1 cm (depending on the disc )
ROLL vacuum systemUniversal vacuum system, suitable for al l Roll-machines for absolutely dust-free work!Keeps the air 1 00% dust free.
The vacuum system is mounted to the preinstal led machine; the suction hose withadapter is connected to the industrial vacuum cleaner f.ex. 1 9.1 5055.
All machines (RO-3000, RO-2200, RO-1 800) are already pre-instal led to connect thissystem. Also suitable for previous models of single disc machines – upon request.
Recommendation! We recommend keeping the Vacuum Systemalways mounted!
Holder "Smart"To fix vacuum tube and wrench 1 2mm at the pole.
Rubber ring
To avoid damage when working along thewall
Carrying handle
Integrated carrying handle for easy carryingof the machine
Metal ring with strip
The movable inner metal ring closes, evenon uneven surfaces flush on the ground
Connecting pieces
Two connecting pieces to conect the suctionhose
Suction hose
With T-piece and bushing to connect to theROLL dust separator and vacuum cleaner
05
Special discs for ROLL Single disc machines
1 9.1 4390
1 9.1 4368
1 9.1 4330
1 9.1 4333
1 9.1 4320
1 9.1 4321
1 9.1 4350
1 9.1 4356
ROLL PCD milling disc "PRO3"For removing rough remainders of elastic adhesives, felt, bitumen, ceramic ti leadhesives, loose and ful l surface fi l ler. For removing of coatings and sintered layers.For roughening screeds. A real problem solver for al l surface preparation work, evenon large areas. Ø 400mm, 1 8 kg.
6 x 2 PCD-cutters with very long service l ife due to heigh PCD proportion.Spring mounted. Depth of engagement of PCD cutters adjustable with spacer blocks.
Set PCD segments "PRO" with two cutters6 pcs. Incl. fasteners.
ROLL PCD milling disc "round"For removing rough remainders of elastic adhesives, felt, bitumen, ceramic ti leadhesives and loose fi l ler or sintered layers. For roughening screeds.Ø 400mm, 1 8kg.
6 x 2 PCD-cutters with very long service l ife. Spring mounted.Depth of engagement of PCD cutters adjustable with spacer blocks.
Set PCD-segments "round" with two cutters6 pcs. Incl. fasteners.
Shape of the cutters:1 /4 circle
ROLL Diamond disc "forged"For grinding of cement bonded surfaces, screed, fi l ler, anhydrite, sintered layers,coatings and unevennesses such as trowel marks. For grinding of ceramic ti les.Suitable for soft and abrasive substrates.With 5 rotating "forged" diamond discs Ø 1 25mm.Steel disc Ø 400mm, 1 3kg.Diamond discs with 6 special forging segments inductively welded.
Special feature:+ longer service l ife
Diamond disc Ø 1 25mm "forged"with 6 special forging segments inductively welded.Applications: Concrete, abrasive concrete, screed and spackle.
ROLL Diamond discFor grinding cement bonded surfaces, screed, anhydrite, coatings.The harder the surface the more efficient works this Diamond disc.With 5 rotating two-rowed diamond discs Ø 1 25mm.Steel disc Ø 400mm, 1 2,5kg.
Diamond disc Ø 1 25mm "two-rowed"two-rowed, with high diamond content.
For removing cement bonded materials.Not suitable for adhesives!
Shape of the cutters:1 /2 circle
06
Special discs for ROLL Single disc machines
ROLL Plane scraper (Planfräser)For removing resinous substances, adhesives, remainders of floor coverings as wellas felt. Very efficient also on large areas.
Works l ike a big scraper. With 1 2 carbide cutters (which run on springs), they cut onthe bottom side and on the outside. You can use them twice, just turn.Steel disc Ø 400mm,1 8,5kg.
1 9.1 4325
Set spare cutters for ROLL Plane scraper1 2 carbide cutters, screws and wrench included.
1 9.1 4326
ROLL RotorscraperFor removing resinous substances and remainders of floor coveringsespecial ly with woven back. Works l ike a big scraper.
With 6 carbide cutters (which run on springs). You can use cutters 4 times.Steel disc Ø 400mm, 1 4,5kg.
1 9.1 4322
Set spare cutters for ROLL Rotorscraper6 carbide cutters, screws and wrench included.
1 9.1 4323
ROLL Milling discFor mil l ing spackle, screed and sinter layer. Works l ike a mil l ing machine.With 5 rotating steel pots, each with 9 flexible mounted carbide spikes.Steel disc Ø 400mm, 1 6,5kg.
1 9.1 4327
Set spare spikes for ROLL Milling disc45 carbide spikes, 1 5 bolts, springs, rings and screws included.
1 9.1 4328
Special discs for ROLL Single disc machines
07
Tungsten carbide disc with 5 discs grit 1 4
For rough grinding of cement bonded surfaces. For grinding paint, coatings, lacquer.Very aggressive due to the rotation of the discs and the weight of the disc – 1 5kg.With 5 rotating split discs Ø 1 27mm, grit 1 4, on steel disc Ø 400mm.
Tungsten carbide disc is part of the multi-purpose disc compatible with otheraccessory sets!
1 9.1 71 60
Tungsten carbide disc grit 1 4 Ø 1 27mm 1 9.1 71 65
Tungsten carbide ring disc grit 1 4
For universal use! For rough grinding of cement bonded surfaces, sintered surfaces.For grinding of paint and coatings. For grinding sl ightly uneven surfaces. Forremoving adhesive fi lms.
Steel disc Ø 400mm, 1 4kg.
1 9.1 71 80
Tungsten carbide ring disc grit 1 0
For rough grinding of cement bonded surfaces, sintered surfaces.For removing remainders of adhesive and coatings. For grinding sl ightly unevensurfaces. For roughening concrete surfaces. For removing adhesive fi lms.
Steel disc Ø 400mm, 1 4kg.
1 9.1 71 82
Tungsten carbide ring disc grit 6
Very rough. For removing ducti le adhesive, bitumen, felt board and remainders offloor coverings. For mil l ing ti le adhesive and remainders of plaster.
Steel disc Ø 400mm, 1 4kg.
1 9.1 71 81
Tungsten carbide ring Ø 400mm grit 1 4Tungsten carbide ring Ø 400mm grit 1 0Tungsten carbide ring Ø 400mm grit 6Screws and nuts included.
1 9.1 71 85
1 9.1 71 88
1 9.1 71 87
Tungsten carbide disc Ø 400mmFor grinding spackle, screed and adhesive fi lms. More efficient than abrasives.Double sided metal disc Ø 400mm.Used with drive disc 1 9.1 4211 /1 2.
Grit 1 0Grit 1 4Grit 24 (screed)Grit 36 (spackle)
1 9.1 71 251 9.1 71 301 9.1 71 351 9.1 71 40
1 9.1 4280
1 9.1 4290
1 9.1 4308
1 9.1 4309
1 9.1 41 83
08
Special discs for ROLL Single disc machines
1 9.1 45004-headed wood sanding disc Ø 400mmFor sanding wooden floors, parquet and cork, for finish sanding and for renovating.For sanding before varnishing and sealing. 4 discs Ø 1 50mm run on high qualitybearings, screwed on a steel disc, discs are with soft underlay for Velcro sandingpaper, they turn due to rotation of the machine.Efficient disc with high sanding removal.
On steel disc Ø 400mm, 21 kg.
We recommend working with ROLL vacuum attachmentfor dust-free working area!
Steel wire brush Ø 400mmUniversal use for brushing contaminated concrete surfaces.Also for metal surfaces and moulds for concrete.With 5 steel wire brushes, 0,8mm wire.
Aluminium disc Ø 400mm, 7kg.
Wire brush Ø 80mm
Stone grinding wheel disc Ø 400mmFor grinding concrete, screed and spackle.Aggressive grinding with very smooth grinding results.
Aluminium disc Ø 400mm, 8,5kg.
Stone grinding wheel Ø 400mm
Smoothing disc Ø 600mmFor smoothing wet concrete. Steel disc Ø 600mm with edges bent up sl ightly, 1 0kg.
Abrasives for ROLL Single disc machines
09
ROLL Drive disc of aluminium Ø 380mmFor abrasive discs. With exchangeable rubber covering.Wrench and fixation screw included. 4,25 kg.
1 9.1 4211
ROLL Drive disc of aluminium Ø 400mmFor abrasive discs. With exchangeable rubber covering.Wrench and fixation screw included. 4,5 kg
1 9.1 421 2
Rubber covering 52.00391
Wrench 1 2mm 52.00394
Holder "Smart" 54.001 55
Abrasives Ø 380mmFor single disc machines, double sided, used with drive disc 1 9.1 4211 .Premium quality for professionals. Sil icium carbide on cloth/paper.Pack of 1 0 units.
Grit 1 6Grit 24Grit 36Grit 40Grit 60Grit 80Grit 1 00Grit 1 20Grit 1 50Grit 1 80
1 9.1 42201 9.1 42301 9.1 42351 9.1 42401 9.1 42501 9.1 42601 9.1 42701 9.1 42671 9.1 42681 9.1 4269
Abrasives Ø 406mmFor single disc machines, double sided, used with drive disc 1 9.1 4211 /1 2.Premium quality for professionals. Sil icium carbide on cloth/paper.Pack of 1 0 units.
Grit 1 6Grit 24Grit 40Grit 60Grit 80Grit 1 00Grit 1 20
1 9.1 42711 9.1 42721 9.1 42731 9.1 42741 9.1 42751 9.1 42621 9.1 4263
Pad holder Ø 380mmFor Super pads and Normal pads, with exchangeable spiked plate.
1 9.1 5340
Spiked plate400mm for pad holder 1 9.1 5340
52.00389
Superpads 20mm Ø 406mmFrom black to white decreasing hardness density.Pack of 5 units. Used with pad holder 1 9.1 5340.
Black for rough cleaningGreen for cleaning (thorough cleaning)Red for softer cleaning of sensitive floorsBeige for waxing, pol ishing and sensitive cleaningWhite for polishing
1 9.1 53501 9.1 53601 9.1 53701 9.1 53801 9.1 5390
Normal pads 8mm Ø 406mmFrom black to white decreasing hardness density.Pack of 1 0 units. Used with pad holder 1 9.1 5340.
Black for rough cleaningGreen for cleaning (thorough cleaning)Red for softer cleaning of sensitive floorsBeige for waxing, pol ishing and sensitive cleaningWhite for polishing
1 9.1 53511 9.1 53611 9.1 53711 9.1 53811 9.1 5391
52.00393Fixation screw M 25
1 9.1 54001 9.1 541 01 9.1 54201 9.1 54301 9.1 54351 9.1 5440
1 9.1 551 01 9.1 551 51 9.1 55201 9.1 55251 9.1 5530
1 9.1 5550
1 0
Abrasives for ROLL Single disc machines
1 9.1 4925
Industrial design for use on construction sites 3x2.5mm²
Features:+ IP 44+ very flexible -35°C+ oil resistant and mechanical ly stable+ ideal for use on construction sites+ with shockproof plug and - coupling with cap+ excellent abrasion resistance. 1 0m, AT N07V3V3-F 3G2,5+ wear resistant cable jacket
82.00111
Sanding nets Ø 406mmUsed with pad holder and pad.Pack of 1 0 units
Grit 60Grit 80Grit 1 00Grit 1 20Grit 1 50Grit 1 80
Superfinishing Pad Ø 406mmPack of 1 0 units. Used with pads and padholder.For the final Finish of wooden floors and parquet with Parquet sanding machineWOODY and all customary single disc machines.
Patented texture - due to the multihole surface you get a nearly dustfree sanding,loading of the pad is reduced. With high removal peformance and longer service l ife.
Grit 60Grit 80Grit 1 00Grit 1 20Grit 1 50
Wool pad Ø 41 0mmNon-abrasive. For the suction, or removal, excess oils & waxes.Thickness 5mm. Pack of 1 0 units.
Current limiter with soft startMaintenance-free, with long l ifetime. The tripping of the fuse and work interruptiontime involved is avoided!
Without jerking soft start more safety and protection of the machine is guaranteed.Up to 3500 W.
Industrial extension cable 1 0m
Special discs for ROLL Single disc machines
11
Grinding brush 400mm greyFor cleaning contaminated industrial floors.Nylon brush with abrasive grits.
1 9.1 5305
Scrubbing brush 400mm white, roughUniversal cleaning brush for shops, entrances etc.For ti les and synthetic floor coverings.Polypropylene fibre 0,7mm.
1 9.1 531 0
Polishing brush 400mm brown (Union)For polishing wax, emulsions etc. to get a shiny surface.For cleaning synthetic floor coverings. Nature bristle.
1 9.1 5330
Shampooner brush 400mm white, softFor cleaning synthetic floor coverings, stone and thin carpets.
1 9.1 5320
Liquid tank for Single Disc MachinesFor Single Disc Machine RO-1 800.
To be instal led on the pole of the machine.For applying detergent etc. during work.
Til l 1 2l capacity.
53.801 20
1 2
• Made in GermanyQuality product from Roll
• high torque
• soft start
• adjustable pressure
• folding drawbar
• integrated dust extractor
ROLL Floor grinding machines
Integrated vacuum system
Flexibly mounted
Easy handling
Due to wide and multipleadjustable guide handle
Adjustable pressure
Due to adjustable wheel axle
High torque
Brushless motor with 1 650 rpm
Carrying handle
Folding drawbar
For easy transport
Operating hours counter
1 3
ROLL Floor grinding machines
Floor grinding machine RO-300Developed by ROLL, this floor grinding machine sets new standards in the surfacepreparation. By the high performance, compact size and low weight, the machine isan ideal companion on all construction sites. Innovative components set newstandards in this class:
• industrial motor• low power consumption• soft start• adjustable pressure• folding drawbar• integrated dust extractor• operating hours counter
Delivery without disc.
Technical specifications:Working power: 2200W / 230VRotation: 1 650 rpmWeight: 63kgWorking width: 300mm
380V version on request!
1 7.1 6800
Diamond disc V1 2 Ø 300mmwith 1 2 V-type segments. For leveling of cementitious substrates.Aggressive grinding with long service l ife.
1 7.1 6875
PCD-disc PRO Ø 300mmWith each 6 poly-crystal l ine diamond cutters (PCD) and PCD supporting elements.To remove thick coatings and paintings, rough remainders of adhesives and sealings(e.g. epoxy resin, polyurethane, and acrylate). The PCD supporting elements preventa deep engagement ot PCD cutters.
Extremely long service l ive thanks to very high PCD proportion!
1 7.1 6880Made inGermany
Made inGermany
PCD-disc Ø 250mm "PRO"With each 6 poly-crystal l ine diamond cutters (PCD) and PCD supporting elements.To remove thick coatings and paintings, rough remainders of adhesives and sealings(e.g. epoxy resin, polyurethane, and acrylate). The PCD supporting elements preventa deep engagement ot PCD cutters.
Extremely long service l ive thanks to very high PCD proportion!
1 7.1 6780
Diamond disc Ø 250mm V1 2Mit 1 2 Segmenten in V-Anordnung.Aggressive grinding with long service l ife.
1 7.1 6775
PCD-disc Ø 250mm "PRO" - 1 2°Like 1 7.1 6780
Special feature: Even more effective by the angle of PCD segments of 1 20
1 7.1 6780/1
Made inGermany
Made inGermany
Floor grinding machine RO-250The floor grinding machine RO-250 is ideal for grinding concrete and screed, as wellas to remove coatings and remainders of adhesives. For small to medium-sizedareas. Delivery without disc.
• high torque• adjustable pressure• integrated dust extraction system• ti lting grinding head• easy handlingg
Technical specifications:Working power: 2200WRotation: 1 41 0 rpmWeight: 59kgWorking width: 250mm
1 7.1 6700
111 4
ROLL Parquet sanding machine Woody
Easy to use
Handling l ike a Single Disc Machine.No attention to the sanding direction
Robust handle bar
Professional drawbar with wide handlesin a closed design, aluminium square tube anddrawbar joint as high-strengthened construction
Powerful
3000 watt motor power and 94 kg machineweight ensure high performance
Dust free work
The sanding dust is sucked with the integratedvaccum attachment and the connection of anexternal industrial vacuum cleaner
Operation
Through the 3-headed planetary head systemless sanding steps are necessary
Ball rolls
To adjust the sanding pressure and easyhandling of the machine. For the transport,transport wheels are included
• excellent sanding results
• high removal
• easy to use
• dust free work
• 30% time saving
24.701 00
53.1 402453.1 403653.1 404053.1 406053.1 408053.1 41 00
53.1 504053.1 506053.1 508053.1 51 0053.1 51 2053.1 51 5053.1 51 80
53.00300
24.701 20
ROLL Parquet sanding machine Woody
1 5
53.1 6050
53.1 308053.1 31 00
Tungsten carbide disc Ø 1 40mm Grit 36For the rough sanding with the parquet sanding machine WOODY for very hard orlubricious surfaces and greatly toothed parquet floors. .Pack of 3 units.
+ more efficiancy+ longer lifetime
53.1 61 00
Parquet sanding machine WOODYProfessional Parquet sanding machine with vertical sanding - a generation of thefuture which can replace belt sanders!
With the Parquet sanding machine Woody efficient work is guaranteed, with highabrasion and excellent result from rough sanding ti l l finish sanding. Use on wood,parquet and cork flooring. Can be used for renovation and new laid parquet.
Technical specifications:Working power: 3000WDisc Ø: 3 x 1 40mmRotation: 800 rpmWeight: 94kg
Delivery includes 6 discs Ø 1 40mm for velcro sanding discs, vacuum system withsuction hose and bushing to connect to the ROLL dust separator and vacuumcleaner, transport wheels and ball rol ls.
Sanding disc Ø 1 40mm for WOODYIncl. velcro covering.
Pad holder Ø 430mm for WOODY
Velcro sanding disc Ceramic Ø 1 40mm Grit 50Developped especial ly for the rough sanding with the parquet sanding machineWOODY. Very long endurance and very efficient.Pack of 30 units.
+ more efficiancy+ longer lifetime
Velcro sanding disc Zircon Ø 1 40mmfor Parquet sanding machine Woody. Premium quality for professionals.Grain: Zirconia ful ly resin bonded. Pack of 30 units.Grit 24Grit 36Grit 40Grit 60Grit 80Grit 1 00
Velcro sanding disc Aluminium Oxid Ø 1 40mmFor fine grinding with the Parquet sanding machine Woody.Premium quality for professionals. Pack of 30 units.Grit 80Grit 1 00
Superfinishing Pad Ø 1 40mmFor the final sanding and finish sanding with perfect result on all wooden and parquetfloors with the Parquet sanding machine WOODY. Pack of 30 units.Grit 40Grit 60Grit 80Grit 1 00Grit 1 20Grit 1 50Grit 1 80
ROLL Hand grinding machines
1 6
Speed control
To set the optimal speedto several tools
Dust free work
The sanding dust is sucked with the integratedvaccum attachment and the connection of anexternal industrial vacuum cleaner
Hinged housing with magnet
Closed: for dust free workOpened: for sanding up to the edge
Intelligent vacuum system
Adjustable in the height and rotary cover fordifferent height of discs and for more comfortablework along the wall
Powerful motor
With dust protected electrical parts and thermicoverload protection for a long service l ife,packed in a compact body
Reinforced gear
Reliable and robust with double bearing of theoutput shaft and optimized transmissioncomponents
Sanding frame with castors
Height adjustable castors for comfortable work andfor adjustment of the working angle (Included withROMO, wood sanding kit, sanding frame)
Made in GermanyQuality product from Roll .
Universal useUniversal hand grinding machine with a variety of accessories - to work on allsubfloors and wood. Available in diameters of 1 25mm and 1 80mm.
High qualityHigh-quality components such as vacuum system made of metal and an industrialmotor make the device rel iable and robust.
ROLL Hand grinding machines
1 7
Wood sanding kit for RO-1 25
Application as edge sander. Including: Velcro sanding disc Ø 1 25mm for velcrosanding discs and sanding disc for sanding discs with hole and a sanding frame with2 height adjustable castors.
24.70400
Hand grinding machine RO-1 25Application: universal ly applicable, ideal for the edge area and on stairs.For al l subfloor works with the extensive range of accessories.Including vaccum attachment for the connection of an external industrial vacuumcleaner.
Technical specifications:Working power: 1 530WRotation: 3400 - 8000 rpm steplessWeight: 4,5kgWorking width: 1 25mm
Delivery in metal carrying case.Delivery without diamond disc. Accessories see page 1 8/1 9.
1 9.1 4781
Edge- and stair sander ROMO-1 25For sanding wooden floors, parquet and cork, along the wall and on stairs.Due to the adjustable cover you can work close to the wall . Including vaccumattachment for the connection of an external industrial vacuum cleaner.
Technical specifications:Working power: 1 530WRotation: 3400 - 8000 rpm steplessWeight: 4,7kgWorking width: 1 25mm
Delivery with velcro sanding disc Ø 1 25mm for velcro sanding discs and sanding discfor sanding discs with hole and a sanding frame with 2 height adjustable castors.Delivery in metal carrying case.
24.70300
Hand grinding machine RO-1 80Application: universal ly applicable, for al l subfloor works with the extensive range ofaccessories. Including vaccum attachment for the connection of an external industrialvacuum cleaner.
Technical specifications:Working power: 2200WRotation: 1 900 - 7500 rpm steplessWeight: 9,5kgWorking width: 1 80mm
Delivery in metal carrying case.Delivery without diamond disc. Accessories see page 1 8/1 9.
1 9.1 4851
Edge sander ROMO-1 80Application: for sanding wooden floors, parquet and cork. Including vaccumattachment for the connection of an external industrial vacuum cleaner.
Technical specifications:Working power: 2200WRotation: 1 500 - 5600 rpm steplessWeight: 1 1 ,5kgWorking width: 1 80mm
Delivery with velcro sanding disc Ø 1 80mm with soft underlay for velcro sandingdiscs and a sanding frame with 2 height adjustable castors.Delivery in metal carrying case.
24.70200
Wood sanding kit for RO-1 80
Application as edge sander. Including: Velcro sanding disc Ø 1 80mm with softunderlay for veclro sanding discs and a sanding frame with 2 height adjustablecastors.
24.70250
Sanding frame for RO-1 80 24.70260
See article 24.70250, however without sanding disc.
Sanding frame for RO-1 25See article 24.70400,however without sanding disc.
24.7041 0
Accessories for ROLL Hand grinding machines
1 8
1 9.1 4333
1 7.1 6485
1 7.1 6490
PCD-disc Ø 1 25mm "Wave"With 1 2 half round segments.
For more effective removal of adhesive remains, floor coatings, paints, sealings(epoxy resin, polyurethane and acryl ic) concrete and mastic asphalt.
1 7.1 6481
Diamond disc Ø 1 25mm "V6"With 6 V-shaped segments.
For removing concrete, screed, level l ing compound, sealings.
1 7.1 6468
Velcro sanding disc Ø 1 25mm with soft underlayFor hand grinding machine RO-1 25 | ROMO-1 25 and angle grinders. Combi discincluding nut M1 4. Used with velcro sanding discs and sanding discs with center hole1 25mm.
27.00394
Velcro sanding disc Ø 1 25mmFor hand grinding machine RO-1 25 | ROMO-1 25 and angle grinders.Used with velcro sanding discs 1 25mm.
27.00393
Sanding disc Ø 1 25mmFor hand grinding machine RO-1 25 | ROMO-1 25 and angle grinders.Used with sanding discs 1 25mm.Including nut M1 4
Sanding discs see page 50
27.00394/1
Diamond disc Ø 1 25mm "forged"with 6 special forging segments inductively welded.Applications: Concrete, abrasive concrete, screed and spackle.
Diamond disc Ø 1 25mm with 1 6 special segmentswith 1 6 high quality diamond segments. Very aggressive grinding effect on allcementitious substrates.Application: To remove adhesive fi lms, coatings and fi l lers.Especial ly effective in side retraction into the remainders.
PCD-disc Ø 1 25mm "PRO"With each 3 poly-crystal l ine diamond cutters (PCD) and PCD supporting elements.To remove thick coatings and paintings, rough remainders of adhesives and sealings(e.g. epoxy resin, polyurethane, and acrylate). The PCD supporting elementsprevent a deep engagement ot PCD cutters.
Extremely long service l ive due to very high PCD proportion!
Accessories for ROLL Hand grinding machines
1 9
PCD-disc Ø 1 80mm "PRO"With 6 poly-crystal l ine diamond cutters (PCD) and 3 PCD supporting elements.To remove thick coatings and paintings, rough remainders of adhesives and sealings(e.g. epoxy resin, polyurethane, and acrylate). The PCD supporting elementsprevent a deep engagement ot PCD cutters.
Extremely long service l ive due to very high PCD proportion!
1 9.1 4803
PCD-disc Ø 1 80mm "Wave"With 1 8 half round segments.
For more effective removal of adhesive remains, floor coatings, paints, sealings(epoxy resin, polyurethane and acryl ic) concrete and mastic asphalt.
1 9.1 481 0
Diamantscheibe Ø 1 80mm "V9"With 9 V-shaped segments.
For removing concrete, screed, level l ing compound, sealings.
1 9.1 4811
Velcro sanding disc Ø 1 80mm with soft underlayFor hand grinding machine RO-1 80 | ROMO-1 80 and angle grinders.Used with Velcro sanding discs 1 80mm.
Sanding discs see page 49
27.00945
Industrial vacuum cleaners
20
Industrial vacuum cleaner 3450
Powerful industrial vacuum cleaner, 3-engined, with fi lter class M, incl. fi l ter cleaningsystem, incl. accessories.
The industrial vacuum cleaner 3450 has 3 individual ly switchable bypass suctionmotors in a robust metal housing, isolated to reduce the loudness. Two placed at thesides handles al low easy lifting the motor head.
A vacuum indicator al lows the continuous monitoring of the proper operation andpossible fi lter clogging. A warning l ight shows any fi lter problems.
This industrial vacuum cleaner has a star fi lter with 3m² fi lter surface. By external fi l tercleaning device the fi lter is moved vertical ly is cleaned in order to guarantee a longservice l ife of the fi lter and a constant suction output.
The mobile storage container can be lowered and be emptied quickly and safely. Thevacuum cleaner is mounted on a robust steel frame with non-marking castor wheelsand brake.
Technical specifications:Power: 3450 W (3 engines 230V 50Hz)Airflow: 540m³/hNegative pressure: 25kPaCapacity: 60lFi lter surface: 30000 cm²Weight: 68kgSize: 65 x 66 x 1 34cmFilter class: M
Accessories (incl. ):Hose 50mm nominal diameter, length: 5m, suction tubes, floor nozzle.
1 9.1 51 00
Industrial vacuum cleaner 2300
Powerful industrial vacuum cleaner, 2-engined, with fi lter class M, incl. fi l ter cleaningsystem, incl. accessories.
The industrial vacuum cleaner 2300 has 2 individual ly switchable 11 50 watt bypasssuction motors in a robust metal housing.
A vacuum indicator al lows the continuous monitoring of the proper operation andpossible fi lter clogging. A warning l ight shows any fi lter problems.
This industrial vacuum cleaner has a big cartridge fi lter with 3m² fi lter surface.Including semi-automatic and highly efficient cartridge fi lter cleaning with powerful airpulses for an even longer l ife of the fi lter and constant suction output.
The mobile storage container can be lowered and be emptied quickly and safely. Thevacuum cleaner is mounted on a robust steel frame with non-marking castor wheelsand brake.
Technical specifications:Power: 2300 W (2 engines 230V 50Hz)Airflow: 360m³/hNegative pressure: 25kPaCapacity: 20lFi lter surface: 30000 cm²Weight: 35kgSize: 50 x 48 x 90cmFilter class: M
Accessories (incl. ):Hose 38mm nominal diameter, length: 5m, suction tubes, floor nozzle.
1 9.1 51 20
M-filter for industrial vacuum cleaner 2300Filter class M
1 9.1 51 24
H-filter set for industrial vacuum cleaner 2300 1 9.1 51 22
Set incl. spacer ring and tensioners for industrial vacuum cleaner 2300for conversion to fi lter class H
H-filter for industrial vacuum cleaner 3450 1 9.1 5111
Fl iter class H
ROLL dust separatorMaximize the efficiency of your industrial vacuum cleaner!
The ROLL dust separator captures up to 99% of the dust before it reaches yourvacuum cleaner, no fi lter clogging and no loss of suction. Thus, the durabil ity of thefi lter and the vacuum cleaner is substantial ly increased. Easy to use, effective in theresult.
+ protects the vacuum cleaner fi lter+ no loss of suction+ no clogging of the fi lter+ easy to empty+ 5 castor wheels design prevents ti lting of the dust separator+ steel tank with inner coating
Delivered with cyclone, 45l steel tank, wheeled base, connectors and hose, dust bag.
1 9.1 5032
Industrial vacuum cleaners
21
80.1 0040
ROLL dust separator - antistaticAntistatic version.
Delivered with antistatic cyclone, 45l steel tank, wheeled base with antistatic tape,antistatic suction hoses 1 x2m and 1 x8m and connectors and 1 0 dust bags.
1 9.1 5034
Dust bag for dust separatorPack of 1 0 pieces.
Made of LDPE, real 1 40my. 61 0x800mm.
80.1 0055
Industrial vacuum cleaner 11 50
Powerful industrial vacuum cleaner, single engine, with fi lter class M, incl. fi l tercleaning system, incl. accessories.
The industrial vacuum cleaner 11 50 is excellent particularly by its stabil ity,performance and efficiency, and yet has many features of its big brothers as the fi ltercleaning, the robust metal housing and easy emptying.
A vacuum indicator al lows the continuous monitoring of the proper operation andpossible fi lter clogging. A warning l ight shows any fi lter problems.
This industrial vacuum cleaner has a big cartridge fi lter with 0,65 m² fi lter surface.Including semi-automatic and highly efficient cartridge fi lter cleaning with powerful airpulses for an even longer l ife of the fi lter and constant suction output.
The mobile storage container can be decoupled and be emptied quickly and safely.The vacuum cleaner is mounted on a robust steel frame with non-marking castorwheels and brake.
Technical specifications:Power: 1 1 50 W (230V 50Hz)Airflow: 1 80m³/hNegative pressure: 25kPaCapacity: 1 5lFi lter surface: 6500 cm²Weight: 31 kgSize: 50 x 48 x 80cmFilter class: M
Accessories (incl. ):Hose 38mm nominal diameter, length: 5m, suction tubes, floor nozzle.
1 9.1 5220
H-filter set for industrial vacuum cleaner 11 50 1 9.1 5222
Set incl. spacer ring and tensioners for industrial vacuum cleaner 11 50for conversion to fi lter class H
Steel tank 45lFor replacement with a larger volume of dust.
22
ROLL Stripper machines
Intuitive one-hand joystick
The intuitive one-hand joystick al lows driving andsteering movements in al l directions! All the mainfunctions, as for the kil l switch, the pushbutton forthe tool movement and the adjustment of theworking angle are placed clearly.
Comfortable seat design
With the ROLL-STRIPPER you can either worksitting or standing.
Powerful working light
For better visibi l i ty of the work area while working.
Strong traction chain suspension
with two separately driven chains.Two 230 volt motors with worm gear and 1 ,1 kWreach a torsional (moment) of 428 Nm and aninfinitely adjustable speed of up to 23 meters perminute.
Striking mechanism
The stripper tool is powered by a 1 ,1 kW powerfulmotor and works with 1 000 beats per minute.Another hoist motor with 3000 N nominal forcepresses the tool onto the ground and adjusts theworking angle to remove the floor coveringresidue-free from the subsoil . An additional axiscompensates uneven floors.
• Made in GermanyQuality product from Roll
• high-traction through chain drive
• compact and manoeuvrable
• intuitive Joystick control
• 75 dB low noise operation
• patented technologyOperating hours counter
1 7.1 7000
1 7.1 7500
1 7.1 751 0
1 7.1 7520
1 7.1 7530
1 7.1 7540
1 7.1 7550
ROLL Stripper machines
23
Floor covering deflector for the ROLL-STRIPPER RO-1For mounting on the ROLL-STRIPPER. Ideal supplement for removing of hardsurfaces such as parquet and ceramic ti les.
Complete set consisting of:• flexibly mounted deflector• stripper-tool 1 20mm• tool holder
25.00580
The ROLL-STRIPPER RO-1Area of applicationThe ROLL STRIPPER was developed for the professional removal of al l extremelybonded floor coverings.
Working methodThe floor covering is removed from the subsoil through a pushing motion of the blade.This is a unique construction which allows the detachment even extremely bondedfloor coverings.
• The machine works with high-traction chains which are driven separately. Due to 2motors (230V) with worm gear and 1 ,1 kW the machine can work with 428Nm andadjustable speed up to 23 meters per minute.
• There is an additional motor with 1 ,1 kW which ensures powerful work with al lStripper Tools. The tool works with 1 000 beats per minute (bpm). This is theoptimum rate for efficient operation and low attrition of the tool. At the same time theROLL-STRIPPER operates very quietly with only 75dB.
• The tool itself can be adjusted to the floor covering up to 9mm. An additional axiscompensates unevenness of the ground.
• The hoist motor ensures powerful pressure of the tools onto the ground and anadjustable working angle.
HandlingThe ROLL-STRIPPER is operated by an external control panel. The intuitive one-hand joystick al lows driving and steering movements in al l directions! All functions ofthe ROLL-Stripper can be conveniently operated by the external control panel.Thereby work can be executed while sitting or standing.
Technical specifications:Drive motor (left/right): each 1 ,1 kW, 230 voltsTorque: 428 NmSpeed: up to 23 meters per minute adjustableStroke engine: 1 ,1 kW, 230 voltsBlow count: 1 000 beats per minute (bpm)Hoist motor: 3000 N nominal forceStroke size/length: up to 9mm adjustableWorking width: 1 20 / 250 / 300 / 350 mmDimensions: 1 250 x 590 x 930 mmWeight: 370 kg modular structure, extendable
Chain chassis
Comfortable seat design
Control panel with joystick
Tool holder
Stripper Tool 1 20x80x3mm flat (type 1 )Hardened high alloy tool steel
Stripper Tool 250x80x3mm flat (type 2)Hardened high alloy tool steel
Stripper Tool 300x80x3mm flat (type 3)Hardened high alloy tool steel
Stripper Tool 350x80x3mm flat (type 4)Hardened high alloy tool steel
Stripper Tool 250x80x3mm U-shape (type 5)Hardened high alloy tool steel, bent
Stripper Tool 350x80x3mm U-shape (type 6)Hardened high alloy tool steel, bent
24
• Made in GermanyQuality product from Roll
• Innovative drive technologyby chains
• compact and manoeuvrable
• intuitive Joystick control
• low noise operation
ROLL Stripper machines
Operating hours counter
Motors
Two independent motors with power reserves even intoughest applications.
Striking mechanism
An adjustable stroke of the stripper tool (3 levels) enablesindividual settings depending on the flooring.
Transport
The ROLL-STRIPPER RO-2 can be separated into 2 parts.Additional air tires included.
Innovative drive technology
Drive by chains made of abrasion resistant rubber.Through the polygon wheels a particularly powerfuldrive is guaranteed.
Joystick operation
Infinitely variable speed control forwards andbackwards. Fast backward speed saves time, isbody-friendly and effective when working in theborder area.
Individual operation
The handle element is multiple adjustable forindividual adjustment to the user.
Made in Germany
ROLL Stripper machines
25
1 7.1 8400
Der ROLL-STRIPPER RO-2 1 7.1 8000
1 7.1 841 0
1 7.1 8420
1 7.1 8430
1 7.1 8440
1 7.1 8450
1 7.1 8460
Stripper tool 250x60x1mm U-shape A 90° bendFor texti le floor coverings
1 7.1 851 0
Powerful industrial motorsone each for the drive and the striking mechanism offer power reserves even in thetoughest applications.
Innovative drive technologyby chains with abrasion-resistant rectangular rubber elements with 1 0x larger contactsurface than wheels.
Movable tool axiscompensates for uneven floors.
Innovative tool technologywith hardened stripper tools in different sizes and shapes up to 350mm width.Due to the vacuum hardening, the tool can be re-sharpened.
Joystick operationfor infinitely variable speed control forwards and backwards up to 23 meters perminute. With 1 .5x faster reverse speed.
Low vibration and noise levelThrough the use of industrial electric engines use in residential and noise-sensitivebuildings such as hospitals and schools is possible.
Easy to transportThe included transport wheels with pneumatic tires, a foldable handle and modulardesign, the ROLL-STRIPPER RO-2 can be easily disassembled into 2 parts for easytransport, even in smaller vehicles.
Technical specifications:Drive engine: 1 ,5 kW, 230 volts with worm gearTorque: 327 NmStroke engine: 1 ,1 kW, 230 voltsBlow count: 2500 beats per minute (bpm)Stroke length: adjustable in 3 levelsWorking width: up to 350mmDimensions: 380 x 760 x 11 00 mmWeight: 1 95 kg
Carrying aid for RO-2 (set of 2 pieces) 43.00444
For a simplified loading, unloading and transport over stairs.
Standard tools:
Special tools:
Stripper tool 250x60x2mm U-shape ASteeper pressure angle
1 7.1 8520
Stripper tool 300x60x2mm flatSteeper pressure angle
1 7.1 8560
Stripper tool 300x70x2mm flatSteeper pressure angle
1 7.1 8570
Stripper tool 250x70x2mmWorking width 1 00mm, for parquet
1 7.1 8475
Ramp 240x2000mm (set of 2 pieces) 1 7.1 7750
For loading of heavy equipment into vans. With non-sl ip profi le.
Stripper tool 250x80x2mm flat (type 1 2)
Stripper tool 300x80x2mm flat (type 22)
Stripper tool 350x80x2mm flat (type 32)
Stripper tool 250x80x2mm U-shape A, (type 42)Bevel up
Stripper tool 250x80x2mm U-shape B, (type 52)Bevel down
Stripper tool 350x80x2mm U-shape A, (type 62)Bevel up
Stripper tool 350x80x2mm U-shape B, (type 72)Bevel down
ROLL Stripper machines
26
1 7.1 4575
1 7.1 4580
1 7.1 4582
1 7.1 4581
1 7.1 4590
1 7.1 4595
1 7.1 4592
1 7.1 4511
1 7.1 451 2
1 9.1 4937
1 9.1 4945
E-Cut 65mm
For Multimaster, with bimetal serration for plastic, wood, plywood and nails.Cutting depth 50mm. 3 times longer service l ife, high cutting speed.
1 9.1 4952
E-Cut 35mm 1 9.1 4953
ROLL Bullystripper with T-handleFloor stripper to remove floor coverings.
As always the most functional weapon against old floor coverings as carpet, l ino,PVC and CV.
2 in 1 : a multi-purpose machine for larger areas as well as small fields which aredifficult to reach like stairs and niches. With T-handle to work in a comfortable uprightposition, which can be removed to work with the Bullystripper l ike a hand tool.
With premium attachment-parts for a long service l ife. Delivery incl. carrier withwheels standard blade for universal use.
Technical specifications:Power: 2200 W, 230 VWeight: 1 4,5kgWorking width: 21 0mm
Picture shows machine withoutpole, with vibration-free handle
Blade for BullystripperStandard blade 60x21 0mm for universal usePer unit
Blade for BullystripperStandard blade 60x21 0mm for universal usePack of 1 0 units
Blade for Bullystripper "plus"Special blade 60x21 0mm hardened, 1 ,5mm thick,with higher wear resistance
Blade for Bullystripper 1 30x21 0mmFor soft floors
Jumbo blade for BullystripperWith anti-stick coating (Teflon) and waved cut,ideal carpets with felt back, PVC and lino. 21 0mm.
U-blade for Bullystripper60mmx21 0mm with U-shape 45° bending.Self-cutting for soft floors.
Blade for HandstripperStandard blade 1 45mm, trapezium, for universal use
Blade for Handstripper "plus"Special blade 1 08mm hardened, 1 ,5mm thick,with higher wear resistance
E-Cut 65mm
For Multimaster, with saw teeth for wood, gypsum carton, soft plastics.Cutting depth 50mm.
E-Cut 35mm
1 5.1 2655
1 5.1 2657
1 5.1 2645
1 5.1 2650
Hand scraper 540mm with hammer end
Blade width 1 25mm.Premium scraper with hammer end.
1 5.1 2644
1 5.1 2641
1 5.1 2600
1 5.1 3328
1 5.1 3330
1 9.1 34791 9.1 3480
Scrapers and grinding stones
27
1 9.1 34851 9.1 3486
1 9.1 34821 9.1 3481
Flooring scraper with telescopic handle
Robust model. Telescopic handle included.Length from 97 to 1 75cm. Blade width 21 0mm.Slightly incl ined scraper head for more aggressive work.
Spare blades for Flooring scraper21 0mm, Pack of 1 0 units
Scraper Allway long 500mmBlade width 1 00mm.With one single turn the blade can be fixed or loosen.
Scraper Allway 250mmBlade width 1 00mm.
Scraper 250mmBlade width 1 00mm.Scraper for universal use.With hammer end.
Blades for scrapers 1 00mmPack of 1 00 units
Spatula 80mmWith thick blade, beveled. With hammer end.
Spatula 70mmSharpened blade.
Hand grinding stone
Made of si l icium carbide, 50x50x200mmGrit 20Grit 40
Tungsten carbide grinding block
Due to side edge very effective alongside walls.Size: 200x1 00x20mm.Grit 24Grit 36
Hand grinding stone „flash“ 200mmMade of si l icium carbide, due to holes very aggressive.Size: 200x1 00x35mmGrit 20Grit 36
1 5.1 2421
1 5.1 2425
1 5.1 2428
1 5.1 2424
1 5.1 2423
1 5.1 2434
1 5.1 2436
1 5.1 2435
Linoleum and PVC installation tools
28
Edge-bevel cutter
To clean and bevel the cut edge when laying of LVT Design Flooring planks or ti les.This ensures that the planks are assembled precisely.
With ergonomic handle design and rotating blade.
Blade change without tools.
1 5.1 2448
Leister hand groover GroovyTo prepare grooves without grooving machine.
Including grooving blade 3,5mm.
With guide rol lers and adjustable groove depth.
1 6.1 3940
Grooving blade 3,5mm 1 6.1 3941
For Leister hand groover Groovy
Grooving blade 2,5mm 1 6.1 3942
For Leister hand groover Groovy
Lino strip cutter Vario 11 0
Professional tool for cutting stripes of l ino, PVC, CV and rubber floors, from 0 ti l l1 1 0mm. Can also be used as an edge trimmer. Stepless adjustment of the cuttingwidth. Ergonomic design.
With the unique ROLL-3-blades-system – due to the sl ightly incl inedblades floors can be cut very easily.
Convertible to cutting bar ti l l 355mm!
Lino strip cutter Vario 355
Compare Vario 11 0. For cutting stripes from 0 ti l l 355mm.
Cutting bar for Vario 11 0For l ino strip cutter Vario 355, for stripes ti l l 1 1 0mm.Works with ROLL-3-blades-system.
Cutting bar for Vario 355For l ino strip cutter Vario 11 0, for stripes ti l l 355mm.Works with ROLL-3-blades-system.
Blades
for l ino strip cutter Vario 11 0 and 355.Pack of 20 blades
Edge Trimmer ROLLlino 1 2mmFor cutting production edges. Easy cutting due to the special positionof the blades. Ergonomic design.Blade changing and blade adjustment easy and fast.
Edge Trimmer ROLLlino 22mmFor cutting production edges with a wider cut of 22mm.Easy cutting due to the special position of the blades. Ergonomic design.
Blades for Edge Trimmer ROLLlinoFor Edge Trimmer 1 5.1 2434 und 1 5.1 2436.Pack of 1 0 units.
1 6.1 4060
1 6.1 4061
1 6.1 4062
1 6.1 4051
1 6.1 4067
1 6.1 3984
1 6.1 39881 6.1 39861 6.1 39871 6.1 3985
1 2
3 4
1 6.1 3950
1 6.1 3960
1 6.1 3981
1 6.1 3982
1 6.1 3965
1 6.1 3966
1 6.1 3970
1 6.1 3980
1 6.1 3968
1 6.1 3969
Linoleum and PVC installation tools
29
Floor scriber
Combined tool, can also be used as a short scriber for base boards.Pointed blade and needle included.
Pointed blade for 1 6.1 4060, pack of 5 units
Needle for 1 6.1 4060, pack of 1 0 units
Height scriber
To mark a fix height e.g. for base boards, from 1 0 to 1 50mm.Robust model. Pencil included.Delivery in a convenient box.
Scriber 385mmWith needle (for walls)
Corner knifeExchangeable special blade for individual applications.(comes without blade)
Blade No. 1 , Pack of 2 unitsBlade No. 2, Pack of 2 unitsBlade No. 3, Pack of 2 unitsBlade No. 4, Pack of 2 units
Hand groover
With 5 blades
Spare blades for Hand groover 1 6.1 3950, pack of 1 0 units
Hand groover for safety floors
Spare blade for Hand groover 1 6.1 3981 , per unit
Hand groover
With leading nose and J-blade
Spare blades J-Form for Hand groover 1 6.1 3965, pack of 1 0 units
Hand groover for rubber and PVCWith U-blade
Spare blades U-Form for Hand groover 1 6.1 3970, pack of 1 0 units
Triangle scraper of carbideHand groover for safety floors. Carbide blade included.
Spare blade of carbide for Triangle scraper 1 6.1 3968
1 5.1 2639
1 6.1 3670
1 6.1 3680
1 6.1 3690
Linoleum and PVC installation tools
30
Linocutter ROLLlinoProfessional seam cutter for l ino and PVC.
Overlaying l ines of l ino can be slit and cut exactly in the right position of theunderlaying material .
Advantages:• robust baseplate runs on bearings and thus the Linocutter ROLLlino sl ides easilyon top of the floor – important for sensitive design floor coverings and PU-coatedfloor coverings• blades are sl ightly bent which ensures effortless scribing/cutting• stepless adjustment of cutting width and cutting depth• due to the cut-out in the baseplate the Linocutter ROLLlino can be lead easy at theedge of the floor• Linocutter ROLLlino works with customary trapezium or hook blades• besides trapezium blades also hooked blades can be added:special advantage: thin floor coverings can be cut in one step• blade changing without extra tools
Grooving machine Easy 5000For grooving all kinds of synthetic floors, l ino and rubber.Very handy machine which fol lows uneven floors easily and guaranteesprofessional grooving results. Powered with gear which ensuresconstant rotation.
With stepless adjustment of grooving depth. Side wheel adjustable forcoverings with nubs. With vacuum system to connect vacuum cleanersfor chip free work.
With metal carrying case and carbide blade.
Technical specification:Power: 830 W, 230 VRotation: 5000 rpmWeight: 4,5 kgCarbide blade: 1 30mm, 1 2 teethCutting depth: 0 - 5,0 mm stepless
Chip bag and holding bar on request.
Carbide blade for Grooving machine Easy 50001 30 x 3,2mm, 1 2 teeth trapezium
Diamond blade for Grooving machine Easy 50001 30 x 3,3mm, for safety floors
Leister welding machine Unifloor E with Air Knife NozzleFor welding PVC, rubber, l ino and polyolefins.Delivery with extra narrow Air Knife Nozzle for more precision when welding PUR-coated l inoleum- or PVC flooring material .With digital display for al l important welding parameters.With integrated wall switch and automatic start. With unwind construction.Electronical ly control led heating and stepless control led air flow.Delivery in carrying box.
Technical specification:Power: 2300 W, 230 V , 50/60HzTemperature: 20 - 620°C steplessAir flow (20°C): 300 l/minSpeed: 1 ,0 - 7,5 m/minAir flow range: 50 – 1 00%Noise emission level LpA: 67 dBSize (LxBxH): 420 x 270 x 21 5mmWeight: approx. 11 kg3m cable
1 6.1 3895
1 6.1 3795
1 6.1 3796
Linoleum and PVC installation tools
31
Leister hot air tool Triac AT
The TRIAC AT is an intel l igent hot-air hand tool for welding and shrinking plastics thatis suitable for on-site use. With large digital display and intel l igent «e-Drive»operating unit.
Additional advantages:+ the set temperature levels off automatical ly, voltage fluctuations are compensated+ the thermowell infront of the heating element guarantees precise temperature+ the air volume can be adjusted independently of the temperatureIIncl. Round nozzle 1 6.1 3830.Delivery in carrying case.
Technical specification:Power: 1 600 W, 220 VTemperature: 40–700 °C, steplessAir flow: 1 20 - 240 l/min
1 6.1 3794
Leister MINIFLOOR drive unitThe MINIFLOOR is the only automatic welder in the world that offers the possibi l ity toconnect a hot-air hand tool e.g. Triac ST or Triac AT in the simplest manner. Thequick-lock fastening system at the clamp allows for assembling / dismantl ing of theTRIAC in a matter of seconds. I ts use is worthwhile from weld lengths of 1 ,2m. Thesophisticated technology of the drive unit and the drive-sensors enable weldingdirectly from the wall . There is only one required joint along the weld seam, and thatsaves time! The 51 mm minimum distance from the wall , ensures trouble-free weldingaround construction pipes and L-skirts. Weighing in at 6,6 kg including a TRIAC ATand nozzle the MINIFLOOR is a lightweight solution among comparable welders andis easily transportable. Perfect directional stabil ity thanks to double-axis drive.
Technical specification: :Power drive unit: 1 5 WVoltage / Frequency: 230 V , 50/60HzSpeed: 0,5 - 5,0 m/minDimensions drive unit (LxWxH): 31 0 x 225 x 245mmWeight drive unit: 5,3 kg
1 6.1 3885
Welding car
Professional tool to make an easier job with hand hot air tools i.e. set of Welding carand Hot air tool works similar to a welding machine.
For welding PVC, rubber, l ino and polyolefins. For short lanes as well as large areas.Due to the rubber cl ip (quick-fastener) al l customary hot air tools (Leister Triac,Forsthoff, Steinel) can be fixed fast and easily.
Due to front and back rol lers the system can lead stabil ised in the grooved seam.Working angle adjustable.
For cooling the hot air tool, just ti l t system backwards.(Delivery without hot air tool)
Leister hot air tool Triac STThe successor to the legendary Leister Triac S is characterized as its predecessorthrough handling, rel iabi l ity and versati l i ty.
For welding PVC, rubber, polyolefins and lino floors.Ideal to use with Welding car 1 6.1 3795. Incl. Round nozzle 1 6.1 3830.Delivery in carrying case.
Technical specification:Power: 1 600 W, 220 VTemperature: 40–700 °C, stepless
1 6.1 3830
1 6.1 3785
1 6.1 3860
1 6.1 3856
1 6.1 3855
1 6.1 3872
1 6.1 401 0
Linoleum and PVC installation tools
32
1 6.1 3797
Swan neck nozzleattachable to universal adapter for pressing the seam in curves and corners.
1 6.1 3783
Round nozzle (tip)For welding with speed welding nozzles.
Round nozzle (tip) for radiatorsFor welding under radiators. In conjunction with speed welding nozzles.
Speed welding nozzle5mm: for 4mm welding wire
Comes in a box.
Speed welding nozzle 5/2mmFor welding sensitive PVC- floor coverings, thinner wall coverings.With narrowed slot (2mm) to concentrate the heat stream straightinto the center of the seam.
Comes in a box.
Speed welding nozzle 5/1mmPolyurethan nozzle – For welding sensitive PVC- floor coverings,thinner wall coverings. With narrowed slot (1 mm) to concentrate theheat stream straight into the center of the seam.
Comes in a box.
Hot air welding case Roll
In del ivery included:• Leister hot air tool Triac ST (1 6.1 3796)• Hand groover (1 6.1 3950)• Speed welding nozzle (1 6.1 3860)• Quarter moon knife (1 6.1 4040)• Trim guide (1 6.1 4050)• Round nozzle (1 6.1 3830)• Diamond knife sharpener 1 50x60mm (1 6.1 3865)
Brush for nozzlesMade of brass to clean welding nozzles.Size: 300x1 00x5mm
Pressure roller convex
Used in conjunction with welding nozzles,in case of edge- and base board welding.
Linoleum and PVC installation tools
1 6.1 4026
1 6.1 4025
1 6.1 4040
1 6.1 4041
1 6.1 4042
1 6.1 4050
1 6.1 3865
1 6.1 3861
33
1 5.1 26751 5.1 2676
Distance fork 0,5 for Mozart trimming knifeFor PVC
1 6.1 4027
Distance fork 0,7 for Mozart trimming knifeFor l inoleum
1 6.1 4028
Trimming knife MozartSafe and fast tool for trimming the welding wire.With integrated pre-cut sl ide, exchangeable blade. 1 blade included.
Spare blades for Trimming knife MozartPack of 5 units
Quarter moon knifeFor trimming welding wire. Both sides sharpened.
Quarter moon knife, angled
For trimming welding wire. One side sharpened.
Leather case for Quarter moon knife
Trim guide
For Quarter moon knife
Diamond knife sharpenerDouble sided grit 400 and grit 600, size 1 50x60mm.To sharpen knives e.g. quarter moon knife.Comes in a box with non-sl ip underlay.
Eraser
80x50x20mm. Recommended for removing sl ightly burned or shining stains.For grinding, pol ishing, matting or cleaning metal, paint, wood, ceramicand plastic materials.
Hollow punch
for repair of floor coverings
Ø 30mmØ 40mm
1 5.1 36201 5.1 3630
1 6.1 4030
1 5.1 351 0
1 5.1 2840
1 5.1 4360
1 5.1 4361
1 9.1 581 5
1 9.1 581 6
Linoleum and PVC installation tools
34
1 5.1 3635
Patentierte
Technik
Lino rollers
Pressure rol lers, zinced
4-parts, 50kg, width 500mm3-parts, 34kg, width 370mm
Additional weights upon request!
Transport cradle for lino rollersSuitable for 50kg and 34 kg lino rol lers.
With elastic wheels.
Pressure cork
300x1 20x25mm
Pressure hammer
Made of one piece, forged, with polished claw hammer
Broom with horse hair 60cmwithout handle
Broom with synthetic hair (Arenga) 60cmwithout handle
Pressure roller RO-26With 26 ball bearings for comfortable and firm pressing the seam when laying LVTvinyl design flooring, l inoleum and PVC, carpet etc.
Through the patented design an optimized force distribution is reached, the seam canbe pressed bubble-freed up into the edge erea.
Working width 1 30mm with a total of 26 ball bearings.
Holder for Telescopic arm
Telescopic arm
Aluminium, ti l l 2m.For spiked rol lers and bow for rol ls.
1 6.1 41 00
1 6.1 4090
1 6.1 41 20
1 6.1 41 50
1 6.1 41 30
1 6.1 41 60
1 6.1 41 70
1 6.1 41 80
1 6.1 41 90
Linoleum and PVC installation tools
35
Cold welding liquid 1 litrePremium cold welding l iquid for cold welding PVC and CV.Recommended by all well-known manufacturers.In conjunction with Working tool 1 or 2, for 300 – 400m seam.
Working tool with nozzle 1 (A)For cold welding l iquid, for new, tightly cut seam (<1 mm).Bottle with thin needle nozzle.
Working tool with nozzle 2 (C)For cold welding l iquid or repair paste, for old, badly cut seams,shrinkings and PVC base weldings (>1 mm).Bottle with round nozzle to pour l iquid in it.
Working tool with nozzle 2 (C) specialFor repair paste, for PVC wall coverings.Bottle with slotted nozzle (extra wide nozzle).
Repair paste 1 litre
Used with working tools 1 6.1 41 20 or 1 6.1 41 50, for 200m seam.
Cleaning bottleIncludes cleaning l iquid for cleaning and storing used nozzles.
PVC paste remover 1 litreFor cleaning and matt finishing of dirty and shiny seams.
Cold welding liquid in tubesPremium cold welding l iquid for cold welding PVC and CV. Recommendedby all well-known manufacturers. Tube of 50g for approx. 25m seam.
Tube with nozzle 1 for new seams (< 1mm)Per unitPrice per box of 30 units - 1 0% savings!
Tube with nozzle 2 for old seams (>1mm)Per unitPrice per box of 30 units - 1 0% savings!
1 3.1 1 490
1 3.1 1 630
1 3.1 1 720
1 4.1 1 730
1 5.1 2420
1 5.1 2560
Carpet installation tools
36
Knee kicker de luxe
For carpet stretching.Adjustable length and pin depth.
Kombi stretcher (Ministretcher)For carpet stretching. 2 heads with pins, with ratched handleand repair head. Delivery in a box.
Heat bond iron 220 Volt
With teflon-coated base.
Super - Golden seaming tape 60gFor woven carpets, jute materials and synthetic back or very rough back.Roll of 50m
Stripe cutterFor cutting carpets, for base boards.Adjustable from 45 – 1 00mm.
Spare blades for 1 5.1 2420
Pack of 1 00 units
1 3.1 1 650
1 5.1 2280
1 5.1 2290
1 5.1 1 661
1 5.1 1 660
1 9.1 3944
Carpet installation tools
37
1 7.1 4630
Carpet seam squeezerFor clamping together the carpet head seams.
Moulding lifter 250mm
Stair tool 90mm
Carpet seam roller 1 27mmWith stars.
Pile brush
for seam treatment by tapping movements during fabrication.Dimensions: 1 8x5x4cm
Copper tape 0,08 x 1 0mm self-stickingTo discharge electrostatic charging.Delivery includes a convenient box.Roll of 50m.
Carpet clamp de luxeA Must-have, additional to our stripper machines!Ergonomic design, made of a special aluminium-al loy.
1 9.1 5701
1 9.1 5704
1 9.1 5705
1 9.1 5706
1 9.1 5707
1 5.1 2830
1 5.1 2870
Parquet installation tools
38
1 5.1 2860
Parquet shunting tool 55mm
Robust model, with PE-anvil , beveled point.
Tapping block Universal
Made of Polyethylene, with 2 working edges, 300x70mm.
Tapping block 6mm
Made of Polyethylene, 6mm x 400mm for laminate.
Tapping block 11mm
Made of Polyethylene, 11 mm x 400mm for parquet.
Tapping block flatMade of Polyethylene, 400mm for laminate and parquet.
Rubber hammer white 800g
Engineers hammer 500g
TÜV/GS tested
Engineers hammer 300g
TÜV/GS tested
1 5.1 2952
1 9.1 5725
1 9.1 57301 9.1 57401 9.1 5750
1 5.1 3320
22.1 2980
Parquet installation tools
39
LVT flooring cutter IS-330For cutting LVT and cork floorings up to 6mm thick.
Technical specifications:Blade width: 330mmMax. thickness: 6mmDimensions: 630x440x350mmCutting angle: 0-450
24.711 35
Laminate board cutter StraticutFor cutting laminate boards and MDF,simple and fast application within seconds.For material from 6 to 1 0mm.Dust-free, without electrical connection.
Technical specification:Length: 68cmWeight: 6,5 kgMax. cutting width: 21 0mmsupport stand included.
Wall spacer adjustable
For laying parquet and laminate.Per unit.
Parquet stripping blade
Blade of hardened steel, sharpened, with wooden handle.40 mm60 mm90 mm
Rubber spatula 300mmFor precoating
Cleaning tissuesFor cleaning hands, tools and machines.
For removing adhesives, oi l , fat, wax, paint, si l icon, acryl,bitumen, tar, graphite etc.
Cleaning without water and soap, without residuum.Biodegradable.
Bucket of 72 tissues.
1 5.1 30881 5.1 30891 5.1 3087
1 5.1 30981 5.1 3099
1 5.1 3475
1 5.1 3469
1 5.1 3480
1 5.1 3483
1 5.1 3485
1 5.1 3460
1 5.1 3462
Installation tools
40
1 5.1 3086
1 5.1 3481
Flex spatula (double blade)
To apply and plane liquid materials.Sl ightly rounded blade plus rounded edges.
200 mm270 mm350 mm
Flex spatula (double blade)
To apply and plane liquid materials.Straight blade, rounded edges.
200 mm270 mm
Spiked roller 250mm x 11mm
With integrated splash guard.Without handle, suitable for telescopic arm 1 9.1 581 5.
Spiked roller 250mm x 31mm
Spiked roller 500mm x 11mm
With integrated splash guard.Without handle, suitable for telescopic arm 1 9.1 581 5.
Spiked roller 500mm x 31mm
Spiked roller 750mm x 11mmWith integrated splash guard.Without handle, suitable for telescopic arm 1 9.1 581 5.
Hobnailed shoes 25mm
With 25mm nails and fastening straps.
Hobnailed shoes 50mm
With 50mm nails and fastening straps.
Spiked roller 500mm x 22mm
Leveling spatula
Stainless, with adjustable side edge from 2–1 5mm.
1 5.1 3455
1 5.1 3457
1 5.1 3451
1 5.1 3450
1 5.1 3295
1 5.1 3281
1 5.1 331 5
1 5.1 3350
1 5.1 33601 5.1 33701 5.1 3380
1 5.1 33901 5.1 341 0
1 5.1 3456
1 5.1 3453
Installation tools
41
1 9.1 581 5
Pin leveller
Professional tool for applying adhesive and leveling compounds.Base profi le 600mm with 6 replaceable spikes.Applying height is adjustable from 0 to 11 mm due to a stainless shim.(without telescopic arm)
Replacement pins up to 11mm
Set of 1 2 spikes plus drive out tool.
Spreading knife flatFor applying different materials, for universal use.With wooden frame and flat, stainless blade 600mm.(without telescopic arm)
Spreading knife with notched insert R 1For applying adhesive and leveling compounds. With wooden frame andclamp to add notched inserts 560mm.Delivery including: 1 unit notched insert R1 (compare 1 5.1 3295),holder for poles e.g. telescopic arm (telescopic arm not included)
R1 notched inserts
560mm 3,0x4,0x1 ,5mm, pack of 1 0 units
R2 notched inserts
560mm 5,0x4,0x2,0mm, pack of 1 0 units
R3 notched inserts
560mm 5,0x6,0x2,4mm, pack of 1 0 units
Finishing trowel
Stainless steel, size 280x1 35mm
Blade hardened and polished.
300mm400mm500mm
Finishing trowel
Finishing trowel, flatBlade hardened and polished.
400mm500mm
Replacement pins up to 20mm
Set of 1 2 spikes plus drive out tool. For spreading knifes without adjusting scale.
Spreading knife with notched insert R2 and 2 pinsProfessional tool for applying adhesive and leveling compounds on big areas inergonomical upright position. Including 1 unit notched insert R2 56cm and a stainlessshim for setting different levels. Delivery including holder for poles e.g. telescopic arm(telescopic arm not included)
Telescopic arm
Adjustable ti l l 2m. Suitable for Spiked spreading knives, spiked rol lers and rol ls.Made of aluminium, sol id model.
Installation tools
42
Adhesive spatula 1 80mmBlade hardened and polished.Pack of 1 0 units
A1A2A3
B1B2B3B4B5B6B7B1 0B11B1 3B1 4B1 5
Spatula flat
1 5.1 30561 5.1 30501 5.1 3051
1 5.1 30571 5.1 30581 5.1 30541 5.1 30671 5.1 30551 5.1 30531 5.1 30431 5.1 30441 5.1 30451 5.1 30471 5.1 30461 5.1 3052
1 5.1 3059
Threshold ruler
Adjustable 75-11 0cm, stainless.
1 5.1 3540
Adhesive spatula 21 0mmBlade hardened and polished.Pack of 1 0 units
A1A2A3A4A5
B1B2B3B5B6B11B1 5
Spatula flat
1 5.1 30601 5.1 30621 5.1 30631 5.1 30641 5.1 3065
1 5.1 30701 5.1 30801 5.1 30721 5.1 30711 5.1 30731 5.1 30661 5.1 3068
1 5.1 3061
Adhesive spatula 250mmBlade hardened and polished.Pack of 1 0 units
A1A2
B1B2B3B1 3
1 5.1 30811 5.1 3085
1 5.1 30821 5.1 30831 5.1 30841 5.1 3079
Interchangeable spatulas
Blade hardened and polished,to use notched inserts.Pack of 1 0 units.
1 80mm21 0mm280mm
1 5.1 30901 5.1 31 601 5.1 3230
Aluquick
Spatula to use notched inserts, made of aluminium
1 80mm280mm
1 5.1 33001 5.1 331 0
Installation tools
43
Notched inserts 1 80mmFor interchangeable spatulas and Aluquick, wear-resistant,pack of 1 0 units.
A1A2A3A4A5
B1B2B3B4B5B6B7B1 0B11B1 4B1 5B1 6B1 7
C1C2C3C4
Notched inserts 21 0mmFor interchangeable spatulas and Aluquick, wear-resistant,pack of 1 0 units.
A1A2A3A4A5
B1B2B3B5B6B7B9B1 0B11B1 5B1 7
S1 (Non Statik K)S2 (Non Statik TL)S3S4
C1C2
Notched inserts 280mmFor interchangeable spatulas and Aluquick, wear-resistant,pack of 1 0 units.
A1A2A3A4A5
B1B2B3B4B5B6B7B1 0B11B1 2B1 5B1 6B1 7
C1C2C3C4
S1 (Non Statik K)S2 (Non Statik TL)
Original size
1 5.1 31 001 5.1 31 401 5.1 31 501 5.1 31 511 5.1 31 52
1 5.1 311 01 5.1 31 201 5.1 31 301 5.1 31 311 5.1 31 321 5.1 31 341 5.1 31 371 5.1 31 381 5.1 31 331 5.1 31 551 5.1 31 351 5.1 31 391 5.1 31 36
1 5.1 31 561 5.1 31 571 5.1 31 581 5.1 31 59
1 5.1 31 701 5.1 321 01 5.1 32201 5.1 32211 5.1 3222
1 5.1 31 801 5.1 31 901 5.1 32001 5.1 32021 5.1 32041 5.1 32071 5.1 32081 5.1 32091 5.1 32031 5.1 32051 5.1 3206
1 5.1 32231 5.1 32241 5.1 32251 5.1 3201
1 5.1 32261 5.1 3227
1 5.1 32401 5.1 32801 5.1 32901 5.1 32911 5.1 3292
1 5.1 32501 5.1 32601 5.1 32701 5.1 32881 5.1 32821 5.1 32711 5.1 32721 5.1 32731 5.1 32991 5.1 32871 5.1 32841 5.1 32851 5.1 3286
1 5.1 32961 5.1 32971 5.1 32891 5.1 3298
1 5.1 32931 5.1 3294
1 9.1 5801
1 9.1 5803
1 9.1 5811
1 9.1 581 0
1 9.1 581 3
1 9.1 5805
1 9.1 581 5
Installation tools
44
Roller "Mohair"
Professional rol ler cover made of Velour, 4mm pile height, 250mm wide, for 8mmbow.
Delivery without bow.
Roller "Pacific"Professional rol ler with a special polyester blend cover, 1 1 mm pile height, 250mmwide, for 8mm bow.
Suitable for coating and sealing of soils with aqueous systems.
Delivery without bow.
Roller "Foam"
Professional rol ler made of foam material , rounded on both sides, 80 mm outerdiameter, 250mm wide, for 8mm bow.
Suitable for sealing.
Delivery without bow.
Roller "Industria"
Professional rol ler with nylon cover, 1 2mm pile height, 250mm wide, for 8mm bow.
Well suited for floor coatings.
Delivery without bow.
Bow for roller 8mmfor 250mm roller.Delivery without rol ler.
Precoat and adhesive roller
250mm with bow and unrol l grid.For simple coatings, adhesive application, etc.
Telescopic arm
Adjustable ti l l 2m. Suitable for Spiked spreading knives,spiked rol lers and rol ls.Made of aluminium, sol id model.
20.1 4396
20.1 4400
20.1 441 0
20.1 4391
20.1 4420
20.1 461 0
20.1 461 5
20.1 4422
20.1 4423
Measuring instruments
45
20.1 4398
CCM – measuring instrumentCalcium-Carbide-measuring-instrument for measuring moisture in screed.With shock-proof manometer. Direct reading of the CM%.Including: 20 carbide ampoules, 1 00g scale, beaker, hammer,lump hammer, flat chisel, steel bal l set (4) and accessories.In metal carrying case.Digital manometer and printer upon request
Carbide ampoules for CCM, pack of 25 units
Carbide ampoules for CCM, pack of 1 00 units
Testing ampoules for CCM, 1 0 x 1 gram
Caisson moisture indicator
Very easy to use – switch ON – apply to the surface – read off digital result –compare with chart.
Especial ly for concrete and screed, as well as wood.Non destructive measurement. Digital LCD. Measure depth ti l l 3cm.Measure sensor located at the bottom. Automatic power switch OFF.With battery. Soft leather carrying case included.Ideal pre-tester for CCM to find the moistest area.
Hydromette Compact BFor measuring moisture in building materials, without damaging any surface.Very easy to use, with universal ly applicable ball sensor. In pocket size.With digital LCD. With battery.Ideal pre-tester for CCM to find the moistest area.
Hydromette Compact BThe Hydromette Compact B is an electronic building moisture indicator for a non-destructive measurement of moisture in building materials. I t uses the dielectricconstant measuring / high frequency principle. The ball probe can be applied flexiblyand is used for the detection of moisture in al l kinds of building materials. I t is alsosuitable for checking the dispersion of moisture in walls, cei l ings and floors. TheHydromette has an audible alarm, which wil l resound if the values exceed the l imit.Limits for the building materials can be set individual ly. An ideal pretester for use withal l "CM" devices. The device is del ivered ful ly equipped with battery and plastic box.
Fetures:+ Direct readings for 7 types of building materials and 2 types of insulating materialsas well as tendential indication for hard and soft wood
+ Acoustic alarm function+ Automatic calibration+ Indication of the device's temperature/ambient temperature
Caisson Thermo- and Hygrometer
Very easy to use – switch ON – adjust temperature or humidity measuring –lift the meter in the air – read digital result.
For fast measuring of air temperature and air humidity, measuring in °C or F.With dew point table on the rear side of the measuring instrument.Automatic power switch OFF. With battery.Soft leather carrying case included.With calibration certificate.
Temperature: from -1 0 ti l l +50°CHumidity: from 5% to 99%Humidity tolerance: +/- 2%Temperature tolerance: +/- 0,3 °C
Surface temperature sensor for 20.1 4422For exact measuring of the surface temperature and thus dew point.For plugging in Caisson Thermo- and Hygrometer.
CCM – measuring instrument EcoThe entry-level model for occasional measurements, very good price-performanceratio. Equipped with mechanical manometer with a maximum pressure range up to1 ,6 bar and a robust precision spring scale, del ivery in a robust plastic carrying case.(without picture)
20.1 4505
20.1 4506
1 6.1 4074
1 5.1 231 3
1 5.1 3520
1 5.1 3530
1 5.1 35901 5.1 36001 5.1 361 0
1 5.1 3588
1 6.1 4080
Measuring instruments
46
Wood/material moisture measuring instrumentin handy mobile format. For the measurement of moisture content in wood andbuilding materials, such as beech, spruce, larch, oak, pine, maple, cement screed,concrete, plaster, anhydrite screed, cement mortar, brick and mortar.Measuring through 2 spikes based on conductivity, non-destructive measurement.With hold function. Measuring depth to 3.5-4.0 cm, the measurement in the upperthird is weighted higher. Range 0-50%. Supplied with carry case, hand strap andprotective cap and calibration protocol.
Wood/material moisture measuring instrument PLUSincluding humidity and temparature. In handy mobile format. For the measurement ofmoisture content in wood and building materials, such as beech, spruce, larch, oak,pine, maple, cement screed, concrete, plaster, anhydrite screed, cement mortar, brickand mortar. Measuring through 2 spikes based on conductivity, non-destructivemeasurement. With hold function. Measuring depth to 3.5-4.0 cm, the measurementin the upper third is weighted higher. Range 0-50%. Supplied with carry case, handstrap and protective cap and calibration protocol.
Surface hardness tester RI-RIFor measuring of surface bonds and strength according to „scribe fences“.Consists of 2 parts, punched sheet (stainless) and a special hard metal pencil .
Measuring wedge
Aluminium 0-20mm, for measuring uneven subfloors.
Steel angle1 00 x 50cm zinced, rigid.
Straight steel edge205cm zinced, rigid, with facet.
Steel rulerStainless, sl ightly roof-shaped,8cm wide, furled.
205cm405cm505cm
T-head 50cm
For steel rulers, to adjust 90°
Template kit for stepsThe 6 arms of different length are positioned and settled at the cornersof the step. That way the dimension of the step can be transferred fast andexactly on to the flooring.
47
Abrasives
1 9.1 42201 9.1 42301 9.1 42351 9.1 42401 9.1 42501 9.1 42601 9.1 42701 9.1 42671 9.1 42681 9.1 4269
1 9.1 42711 9.1 42721 9.1 42731 9.1 42741 9.1 42751 9.1 42621 9.1 4263
1 9.1 5340
52.00389
1 9.1 53501 9.1 53601 9.1 53701 9.1 53801 9.1 5390
1 9.1 53511 9.1 53611 9.1 53711 9.1 53811 9.1 5391
Abrasives Ø 380mmFor single disc machines, double sided, used with drive disc 1 9.1 4211 .Premium quality for professionals. Sil icium carbide on cloth/paper.Pack of 1 0 units.
Grit 1 6Grit 24Grit 36Grit 40Grit 60Grit 80Grit 1 00Grit 1 20Grit 1 50Grit 1 80
Abrasives Ø 406mmFor single disc machines, double sided, used with drive disc 1 9.1 4211 /1 2.Premium quality for professionals. Sil icium carbide on cloth/paper.Pack of 1 0 units.
Grit 1 6Grit 24Grit 40Grit 60Grit 80Grit 1 00Grit 1 20
Pad holder Ø 380mmFor Super pads and Normal pads, with exchangeable spiked plate.
Spiked plate400mm for pad holder 1 9.1 5340
Superpads 20mm Ø 406mmFrom black to white decreasing hardness density.Pack of 5 units. Used with pad holder 1 9.1 5340.
Black for rough cleaningGreen for cleaning (thorough cleaning)Red for softer cleaning of sensitive floorsBeige for waxing, pol ishing and sensitive cleaningWhite for polishing
Normal pads 8mm Ø 406mmFrom black to white decreasing hardness density.Pack of 1 0 units. Used with pad holder 1 9.1 5340.
Black for rough cleaningGreen for cleaning (thorough cleaning)Red for softer cleaning of sensitive floorsBeige for waxing, pol ishing and sensitive cleaningWhite for polishing
Abrasives
48
1 9.1 54001 9.1 541 01 9.1 54201 9.1 54301 9.1 54351 9.1 5440
1 9.1 551 01 9.1 551 51 9.1 55201 9.1 55251 9.1 5530
1 9.1 5550
Sanding nets Ø 406mmUsed with pad holder and pad.Pack of 1 0 units
Grit 60Grit 80Grit 1 00Grit 1 20Grit 1 50Grit 1 80
Superfinishing Pad Ø 406mmPack of 1 0 units. Used with pads and padholder.For the final Finish of wooden floors and parquet with Parquet sanding machineWOODY and all customary single disc machines.
Patented texture - due to the multihole surface you get a nearly dustfree sanding,loading of the pad is reduced. With high removal peformance and longer service l ife.
Grit 60Grit 80Grit 1 00Grit 1 20Grit 1 50
Wool pad Ø 41 0mmNon-abrasive. For the suction, or removal, excess oils & waxes.Thickness 5mm. Pack of 1 0 units.
Abrasives
49
24.0001 624.0002424.0003624.0004024.0006024.0008024.001 0024.001 20
24.5002424.5003624.5004024.5006024.5008024.501 0024.501 20
24.1 001 624.1 002424.1 003624.1 004024.1 006024.1 008024.1 01 0024.1 01 20
Velcro sanding discs Ø 1 78mm with center hole
24.2301 624.2302424.2303624.2304024.2306024.2308024.231 0024.231 20
Sanding discs Ø 1 50mm with center hole
24.8001 624.8002424.8003624.8004024.8006024.8008024.801 0024.801 20
Zircon velcro sanding discs Ø 1 78mm with center hole
24.2202424.2203624.2204024.2206024.2208024.221 0024.221 20
Sanding belts 750x200mmStandard size, suitable for al l customary belt sanders. Premium quality forprofessionals, made of heavy X-cloth with ful ly resin bonding. Grain: Aluminium Oxid,belts with waved joint. Pack of 1 0 units.
Grit 1 6Grit 24Grit 36Grit 40Grit 60Grit 80Grit 1 00Grit 1 20
Zircon – sanding belts 750x200mm
Standard size, suitable for al l customary belt sanders.Premium quality for professionals, made of heavy X-cloth with ful ly resin bonding.Grain Zirconia, belts with waved joint.Pack of 1 0 units.
Grit 24Grit 36Grit 40Grit 60Grit 80Grit 1 00Grit 1 20
Sanding discs Ø 1 78mmPremium quality for professionals. Grain: white Aluminium Oxid.Pack of 50 units.
Grit 1 6Grit 24Grit 36Grit 40Grit 60Grit 80Grit 1 00Grit 1 20
Premium quality for professionals. Grain: white Aluminium Oxid.Pack of 50 units.
Grit 1 6Grit 24Grit 36Grit 40Grit 60Grit 80Grit 1 00Grit 1 20
Premium quality for professionals. Grain: Zirconia.Pack of 50 units.
Grit 24Grit 36Grit 40Grit 60Grit 80Grit 1 00Grit 1 20
Premium quality for professionals. Grain: white Aluminium Oxid.Pack of 50 units.
Grit 1 6Grit 24Grit 36Grit 40Grit 60Grit 80Grit 1 00Grit 1 20
Abrasives
50
Velcro sanding discs Ø 1 50mm with center hole
24.8301 624.8302424.8303624.8304024.8306024.8308024.831 0024.831 2024.831 50
Zircon velcro sanding discs Ø 1 50mm with center hole
24.8402424.8403624.8404024.8406024.8408024.841 0024.841 20
1 9.1 4936
1 9.1 49311 9.1 49321 9.1 49331 9.1 49341 9.1 4935
24.7753024.7754024.7756024.7758024.7759024.77595
24.91 02424.91 03624.91 04024.91 06024.91 08024.911 0024.911 2024.911 50
1 9.1 46051 9.1 461 01 9.1 461 51 9.1 46201 9.1 46251 9.1 46301 9.1 4635
Premium quality for professionals. Grain: white Aluminium Oxid.Pack of 50 units.
Grit 1 6Grit 24Grit 36Grit 40Grit 60Grit 80Grit 1 00Grit 1 20Grit 1 50
Premium quality for professionals. Grain: Zirconia.Pack of 50 units.
Grit 24Grit 36Grit 40Grit 60Grit 80Grit 1 00Grit 1 20
Velcro sanding discs Ø 1 25mm with center holePremium quality for professionals. Grain: white Aluminium Oxid.For Edge sander ROMO-1 25, pack of 50 units.
Grit 24Grit 40Grit 60Grit 80Grit 1 00Grit 1 20
Velcro sanding discs Ø 1 50mm 8 holes8 suction holes 1 center hole. For normal orbital sander.Premium quality for professionals. Grain: white Aluminium Oxid.Pack of 50 units..Grit 24Grit 36Grit 40Grit 60Grit 80Grit 1 00Grit 1 20Grit 1 50
Sanding padFor Multimaster and Supercut, set of 2 units
Sanding paperFor Multimaster and Supercut (with adapter)
Pack of 50 units, without holes
Grit 40Grit 60Grit 80Grit 1 00Grit 1 20
Diamond pads Ø 1 25mmwith dense diamond structure, long service l ife and high flexibi l ity.Can also be used with ROMO-1 25 resp. RO-1 25 in combination with wood sandingkit. Per unit
Grit 50Grit 1 00Grit 200Grit 400Grit 800Grit 1 500Grit 3000
1 5.1 24501 5.1 24601 5.1 24701 5.1 2490
1 5.1 24551 5.1 24651 5.1 24751 5.1 2495
1 5.1 2480
1 5.1 2485
1 5.1 2590
1 5.1 2595
Blades
51
1 5.1 2591
MOZART bladesPremium „Solingen“ quality.High-al loyed tool steel 0,65mm, ice-hardened.Pack of 1 0x1 0 units = 1 00 units. 1 0 units in a dispenser.
MOZART trapezium bladeMOZART hooked bladeMOZART hooked blade, large
1 5.1 24521 5.1 24721 5.1 2491
Blades
Premium „Solingen“ quality.High-al loyed tool steel 0,65mm, ice-hardened.Pack of 1 0x1 0 units = 1 00 units. 1 0 units in a dispenser.
Trapezium bladeTrapezium blade, largeHooked bladeHooked blade, large
Blades with Titan-coating
Premium „Solingen“ quality. High-al loyed tool steel 0,65mm, ice-hardened.With Titan-coating for a long endurance. Pack of 1 0x1 0 units = 1 00 units.1 0 units in a dispenser.
Titan - Trapezium bladeTitan - Trapezium blade, largeTitan - Hooked bladeTitan - Hooked blade, large
Trapezium-Hook blade
Two in one, ice-hardened 0,65mm, premium „Solingen“ quality.Pack of 1 0x1 0 units = 1 00 units.
Concave bladeIce-hardened 0,65mmPack of 1 0x1 0 units = 1 00 units.
Break-off blades 1 8mmIce-hardened, for cutter knives 1 5.1 2494, 1 5.1 2596Pack of 1 0x1 0 units = 1 00 units.
Break-off Hook blades 1 8mmIce-hardened, for cutter knives 1 5.1 2494, 1 5.1 2596Pack of 1 0x1 0 units = 1 00 units.
Titan - Break-off blades 1 8mmIce-hardened, with Titan-coating for a long endurance.For cutter knives 1 5.1 2494, 1 5.1 2596Pack of 1 0x1 0 units = 1 00 units.
1 5.1 2548
1 5.1 2550
1 5.1 2555
1 5.1 2494
1 5.1 2596
1 5.1 2520
1 5.1 2630
1 5.1 261 0
Knives
52
Floor installer knife ROLL with holsterEasy and fast blade changing without tool. Magnet included.Premium quality for professionals.
Dolphin knife with holster
Shark knife with holster
Cutter knife NT 2000Premium knife made of metal with rapid magazine.Incl. 3 break-off blades 1 5.1 2590.
Cutter knife lightIncl. break-off blade.
Universal knife zincIncl. 5 blades 1 5.1 2460
Handle for blades
For handle 1 5.1 2630Pack of 1 0 units
Blade Nr. 22
Without blade
1 5.1 2800
1 5.1 2795
1 5.1 2797
1 5.1 2796
1 5.1 2400
1 5.1 2560
1 5.1 241 0
1 5.1 2580
Scissors and cutters
53
Loop pile cutter "Black"
For al l texti le coverings, except foam backing. Cuts from top to bottom.1 0 blades included.
1 5.1 2441
1 5.1 2560
Mitre cut shear 6cm
For wooden and plastic profi les. 2 x 45 degree blocks.
Mitre cut shear long
With stop faces at 45° and 75 mm length of cut.
For wooden and plastic profi les. Suited to mitre cuts in wide materials.
Mitre cut shear with Trapezium blade
With stop faces at 45° and 50 mm length of cut.
For the particularly fine and fi l igree cut (f.ex. l inoleum).
Mitre cut shear with lever transmission
Suited to right-angled cuts in hard and flat plastic items, e.g. plastic-, PVC-, rubber-and wooden profi les. With stop faces at 90° and 75mm length of cut. Essential forfloor layers, painters, carpenters, and many other trades.
Through the lever transmission up to 80% power savings.
During the cutting process, the effectiveness of leverage increases exponential ly.
Lever transmission: Up to 80 % power savingsThe flatter and harder the material , the greater the force required for cutting. At thispoint, the lever action is initiated:
I t develops its power during the cutting process and develops its greatest effect at theend of the cut - where the force is strongest and the cut would cost a normal scissorsgreat effort. With the help of leverage, the material is cut through with ease.
Universal-cutter red
For woven carpets with jute and double back. 1 0 blades included.
Pack of 1 00 units
Spare blades for 1 5.1 2400
Universal-cutter blue
For carpets with foam back. 1 0 blades included.
Pack of 1 00 units
Spare blades for 1 5.1 241 0
Pack of 1 00 units
Spare blades for 1 5.1 2441
1 5.1 2690
1 5.1 2700
1 5.1 271 0
1 5.1 2720
1 5.1 2725
1 5.1 271 5
1 5.1 2735
1 5.1 2750
Scissors
54
Carpet shears 1 0" (25cm)Premium quality. Nickel blades, black varnished handle.
Carpet shears 1 0" (25cm) for left-handersPremium quality. Nickel blades, black varnished handle.
Carpet shears 1 2" (30cm)Premium quality. Nickel blades, black varnished handle.
Nap shears 6" (1 5cm) angledPremium quality. Nickel blades, bent, plastic coated handle.
Nap shears 7" (1 8cm) angledPremium quality. Nickel blades, bent, plastic coated handle.
Binding shears 8" (20cm), angledPremium quality. Nickel blades, bent, plastic coated handle.
Universal shears 8" (20cm)Stainless. „Solingen“ quality, stainless.
Universal shears 1 0" (25cm)Stainless. „Solingen“ quality, stainless.
1 5.1 2378
1 5.1 2393
1 5.1 2396
1 5.1 2385
1 5.1 2399
1 5.1 2380
1 5.1 2391
Mixers and mixing rods
55
Mixer RO-1 400Powerful mixer with 1 400 Watt and 2-speed gear unit.Powerful motor for demanding mixing jobs with loads up to 50 kg.With soft start which prevents uncontrol led spraying of the mixing materials.With ergonomic soft handle.
Technical specifications:Power: 1 400 Watt, 230 VoltRotation 1 : 1 50 - 300 rpmRotation 2: 300 - 650 rpmCollet: M1 4Weight: 8,00kgMax. mixing quantity: 50kgMax. mixing tool: 1 40mm
Mortar mixing tool 1 40mm M 14
Universal use for heavy and highly viscose compoundse.g. mortar, plaster, ti le adhesive, l ime, concrete, cement, screed, fi l ler,epoxy etc.Til l 50kg.
Standard mixer 1 20mm M 14Ideal for mixing adhesives, sealing compounds, screed,bitumen coatings etc.Til l 25kg.
2-wings mixing tool 1 20mm M 14
Special mixing tool for l iquid and thin viscose materials, adhesives,lacquer, paint, primer etc. Tool ensures fast and homogeneous mixingwithout uncontrol led spraying. Til l 50kg.
Spindle mixing tool M 1 4Universal use for ducti le and highly viscose compoundse.g. mortar, plaster, gypsum, l ime, rendering, ti le adhesive, fi l ler etc.Ti l l 50kg.
Standard mixer 1 20mm SW 10Universal mixing tool for dri l l ing machines, for l iquid and thinviscose materials.Collet: SW 1 0 (SW=wrench size)
Spindle mixing 1 20mm SW 10Universal mixing tool for dri l l ing machines, for viscous and ducti lematerials e.g. ti le adhesive, mortar, plaster, screed etc.Mixing characteristic: from the bottom up.Collet: SW 1 0 (SW=wrench size)
Premium, self adhesive non-sl ip grip tape, very durable,with excellent characteristics. I t can be applied onto most surfacesto provide anti sl ip protection and safety standards e.g. onto stairs,entrances, ramps, public areas, boats, sanitary areas, trucks and buses.
For outdoor application we recommend to use edge sealer 1 4.1 11 73.
Black 50mm x 1 8mTransparent 50mm x 1 8mWhite 50mm x 1 8mRed 50mm x 1 8mGreen 50mm x 1 8mGrey 50mm x 1 8mFluorescent 50mm x 1 8m (luminous)Blue 50mm x 1 8mBrown 50mm x 1 8mGrey 50mm x 1 8m (aqua safe, quality for bare foot areas)Neon yellow 50mm x 1 8mSafety color 50mm x 1 8m (black/yel low)Grey, coarse 50mm x 1 8m (aqua safe, quality for bare foot areas)Transparent 50mm x 1 8m (aqua safe, quality for bare foot areas)
Black 1 4mm x 1 8m (aqua safe, quality for bare foot areas)Grey 1 4mm x 1 8m (aqua safe, quality for bare foot areas)Beige 1 4mm x 1 8m (aqua safe, quality for bare foot areas)
Black 28mm x 1 8m (aqua safe, quality for bare foot areas)Grey 28mm x 1 8m (aqua safe, quality for bare foot areas)Safety color 50mm x 1 8m (black/yel low)
Further widths and sizes upon request.
1 4.1 11 601 4.1 11 611 4.1 11 621 4.1 11 631 4.1 11 641 4.1 11 651 4.1 11 661 4.1 11 671 4.1 11 681 4.1 11 691 4.1 11 711 4.1 11 721 4.1 11 741 4.1 11 75
1 4.1 1 2001 4.1 1 2011 4.1 1 202
1 4.1 1 2051 4.1 1 2061 4.1 1 207
Black Transparent
White Red
Fluorescent Blue
Brown Grey
Neon yellow Safety color
1 4.1 11 73
Anti slipping grip tapes
56
Edge sealer
For anti sl ipping grip tape, for outdoor applications.Based on PVC, tubes of 50g.
ROLL Anti slipping grip tape
1 8.1 2960
1 8.1 2961
1 5.1 2330
1 5.1 2340
1 8.1 2987
1 8.1 2988
1 8.1 2994
1 8.1 29521 8.1 2953
1 8.1 2950
21 .1 203021 .1 204021 .1 205021 .1 206021 .1 2080
Assembly accessories
57
Spray adhesive Box of 1 2 units of 500ml each
Universal use in aerosols, for permanent and temporary adhesion.For paper, carton, wood, thin veneers, cork, leather, texti les, felt, foam,styrofoam, rubber etc. (except PVC and polyethylene).Temperature range: from -20 to +65°C
Spray adhesive Single can
Adhesive injection
With bayonet nut connector and 3 replaceable nozzles(nozzles in 3 different sizes)
Spare nozzlefor 1 5.1 2330, set of 3 units
Polymer assembly adhesive Box of 1 2 units of 470g each
Ready-made 1 -component adhesive, solvent-free.Very fast curing and extreme strength adhesion, easy to press.Can be ground and varnished after curing.
Suitable for al l kind of building materials: base boards, door cases,wood, metal and stone, hard PVC.
Heat resistant ti l l +11 0°C, water proof according to DIN EN 204 - D4.Recommended for undri l led metal profi les because of flexible curing.
Polymer assembly adhesive Cartridge
Cartridge pistol „Profi"Professional pistol, for cartridges and sealing compounds in tubes.
Joint connectors
For renovating cracks in screed. In conjunction with 2-components adhesive.
Pack of 1 000 unitsPack of 1 00 units
2-Components adhesiveConsists of adhesive (1 000g) and hardener (30g).
For fixing grippers and for renovating cracks in screed.For al l sub-floors. Setting time approx. 1 5min.
Steel nails blank 1 ,5 mmPack of 1 000 unitsTEC-steel nails
20 mm25 mm30 mm35 mm45 mm
1 5.1 1 71 5
1 5.1 1 720
22.1 2966
22.1 2967
General work equipment
58
1 5.1 1 721
1 5.1 1 678
Easyboard
Protects knees and back and is very versati le. Provides optimal mobil ity and is highlystable.
Size: 57 x 33 x 9 cm (l x w x h)Carrying capacity: 1 50 kgWeight: approx 4,2 kgPadding: 7 cm PUR - foam pad
Pickup surface for containers: 30 x 40 cm (l x w) (F. ex. Systainer of FESTO)
Bulge for buckets to 32 cm diameter (F. ex. ARDEX, PCI , KIESEL etc.)
1 5.1 1 740
1 5.1 1 679
Pocketable knee pads
For dungarees. Premium quality of cel lular rubber. Very duarable and elastic.Due to the cuttings it is very comfortable to use.Paired.Per pad 75g, dimensions: 22,5 x 1 6 x 1 2mm
Knee pad Ergo
EN 1 4404 certified
Dusk mask with comfort nose seal, FFP2Classic model with ActivForm®, DuraMesh®-structure and comfort nose seal.The ActivForm® seal automatical ly adjusts to different face types and theirmovements. Due to DuraMesh®-structure these masks are strong and durable,reducing consumption. With additional comfort nose seal for comfortable breathing(air keeps cooler). According to EN1 49:2001 , FFP2 NR D: against toxic dusts,mists and fumes based on water and oil .
Pack of 3 units
Dusk mask with comfort nose seal, FFP3Mask with ActivForm®, DuraMesh®-structure and comfort nose seal.The ActivForm® seal automatical ly adjusts to different face types andtheir movements. Due to DuraMesh®-structure these masks are strongand durable, reducing consumption. With additional comfort nose sealfor comfortable breathing (air keeps cooler) and washable,contoured ful l face seal.According to: EN1 49:2001 , FFP3 R D: against al l dusts,mists and fumes based on water and oil .
Packed per unit
Replacement belts
For knee pad Ergo
The ALPRO® knee protectorsThe ALPRO® knee protectors make for optimal knee protection while working donein a kneeling position. With the continuously variable Velcro straps the protectors canbe properly adjusted and fastened to the knee. This way, al l work on building sites, inthe garden or in the workshop can be carried out kneefriendly and painless.
Replacement belts
For knee pad ALPRO
1 2.1 1 4501 2.1 1 4511 2.1 1 4521 2.1 1 4531 2.1 1 4541 2.1 1 4551 2.1 1 4561 2.1 1 457
1 2.1 1 5001 2.1 1 5051 2.1 1 51 01 2.1 1 51 51 2.1 1 5201 2.1 1 5251 2.1 1 530
1 0.00004
Chairmats
59
ROLL polycarbonate chairmatsROLL chairmats are of Polycarbonate and protect al l kinds of floor coverings.Features: odourless and total ly emission-free, free of PVC or vinyl,1 00 % recyclable, UV-stabil ized, ideal for al lergy sufferer, extremely strong,suitable for floor heating system, recommended for chair castors.
Roll polycarbonate chairmats smooth
With non-sl ip coating at the bottom. For parquet, PVC, l ino and all smooth surfaces,also thin carpets.1 00% Polycarbonate without recycling. Thickness 2mm.
925x1 200mm1 000x1 200mm11 50x1 200mm1 500x1 200mm1 850x1 200mm2000x1 200mm3000x1 200mmRound Ø 1 000mm
Roll polycarbonate chairmats with spikes
For carpets. 1 00% Polycarbonate without recycling. Thickness 2,75mm.
930x1 200mm1 000x1 200mm11 50x1 200mm1 500x1 200mm1 850x1 200mm2000x1 200mm3000x1 200mm
Cut-out per chairmat
All sizes are available with cut-out, alongside or broadside.Within sizes 3000x1 200mm every form is available according to drawing.
Special measurements (on estimate) and shapes on request!
Cover strips
Edge trims
System profiles
Profiles with punching
Metal angles
Mounting accessories
Parquet profiles
Stair nosings and angle edges
Stairods and accessories
Categories
62 - 64
65 - 73
74- 78
79 - 80
81 - 86
87 - 1 03
1 04
1 05
1 07
60
Alu silver bright (ASG)
Alu bronze (AB)
Alu gold matt (AG)
Alu stainless steel (AE)
Powder coated
Brass (M) Stainless steel (E)
Material : Aluminium, anodized
Material : Brass | Stainless steel
Alu silver matt (ASM)
Colour overview
Special colors:
Stainless steel brushed (EB)
61
Alu sand matt (ASA)
DrilledFastening with screwsG
Fastening options:
UndrilledFastening with adhesiveUGSelf-adhesiveWith two transparent adhesive lacesSK
L-profile with punchingAll-purpose edge trims, for l ino, PVC, parquet and ti les.Edge trim with special punching for laying in screed or adhesive.
Alu
Length Packing unit Article number2mm 250cm 1 0 x 250cm 11 .1 50043mm 250cm 1 0 x 250cm 11 .1 50054,5mm 250cm 1 0 x 250cm 11 .1 501 06mm 250cm 1 0 x 250cm 11 .1 501 58mm 250cm 1 0 x 250cm 11 .1 50201 0mm 250cm 1 0 x 250cm 11 .1 502511 mm 250cm 1 0 x 250cm 11 .1 50261 2,5mm 250cm 1 0 x 250cm 11 .1 50301 5mm 250cm 1 0 x 250cm 11 .1 50351 7,5mm 250cm 1 0 x 250cm 11 .1 504020mm 250cm 1 0 x 250cm 11 .1 504522,5mm 250cm 1 0 x 250cm 11 .1 5050
Profiles with punching
62
Brass
Length Packing unit Article number3mm 250cm 1 0 x 250cm 11 .1 50704,5mm 250cm 1 0 x 250cm 11 .1 50756mm 250cm 1 0 x 250cm 11 .1 50808mm 250cm 1 0 x 250cm 11 .1 50851 0mm 250cm 1 0 x 250cm 11 .1 509011 mm 250cm 1 0 x 250cm 11 .1 50941 2,5mm 250cm 1 0 x 250cm 11 .1 50951 5mm 250cm 1 0 x 250cm 11 .1 51 001 7,5mm 250cm 1 0 x 250cm 11 .1 51 0120mm 250cm 1 0 x 250cm 11 .1 51 03
Stainless steel
Length Packing unit Article number2mm 250cm 1 0 x 250cm 11 .1 511 43mm 250cm 1 0 x 250cm 11 .1 511 54,5mm 250cm 1 0 x 250cm 11 .1 51 206mm 250cm 1 0 x 250cm 11 .1 51 258mm 250cm 1 0 x 250cm 11 .1 51 301 0mm 250cm 1 0 x 250cm 11 .1 51 3511 mm 250cm 1 0 x 250cm 11 .1 51 361 2,5mm 250cm 1 0 x 250cm 11 .1 51 401 5mm 250cm 1 0 x 250cm 11 .1 51 4520mm 250cm 1 0 x 250cm 11 .1 51 46
Alu
Length Packing unit Article number3mm 250cm 1 0 x 250cm 11 .1 52004,5mm 250cm 1 0 x 250cm 11 .1 521 06mm 250cm 1 0 x 250cm 11 .1 52208mm 250cm 1 0 x 250cm 11 .1 52301 0mm 250cm 1 0 x 250cm 11 .1 52401 2,5mm 250cm 1 0 x 250cm 11 .1 5250
Alu
Length Packing unit Article number3mm 250cm 1 0 x 250cm 11 .1 52014,5mm 250cm 1 0 x 250cm 11 .1 5211
Profiles with punching
63
Expansion joint with punchingEdges with grey rubber joint, 1 0mm total, for l ino, PVC, parquet and ti les.With special punching for laying in screed or adhesive.
Expansion joint with punchingEdges with black rubber joint, 1 0mm total, for l ino, PVC, parquet and ti les.With special punching for laying in screed or adhesive.
Alu
Length Packing unit Article number2mm 250cm 1 0 x 250cm 11 .1 53303mm 250cm 1 0 x 250cm 11 .1 53354,5mm 250cm 1 0 x 250cm 11 .1 53406mm 250cm 1 0 x 250cm 11 .1 53458mm 250cm 1 0 x 250cm 11 .1 53501 0mm 250cm 1 0 x 250cm 11 .1 535511 mm 250cm 1 0 x 250cm 11 .1 53561 2,5mm 250cm 1 0 x 250cm 11 .1 53601 5mm 250cm 1 0 x 250cm 11 .1 53651 7,5mm 250cm 1 0 x 250cm 11 .1 537020mm 250cm 1 0 x 250cm 11 .1 537522,5mm 250cm 1 0 x 250cm 11 .1 5380
Stainless steel
Length Packing unit Article number3mm 250cm 1 0 x 250cm 11 .1 54354,5mm 250cm 1 0 x 250cm 11 .1 54406mm 250cm 1 0 x 250cm 11 .1 5445
Other variants on request
Profiles with punching
64
Flexible angle edges with cut - for bendingAll-purpose edge trims, for laying in screed or adhesive.Angle edges with special cuttings for bending of round forms.
These profi les are laid in mortar or adhesive, pressed throughthe special cut-out of the profi le. The floor covering is then laidflush. (Please pay attention to the instal lation instructions ofthe floor covering manufacturer)
1 4mm undrilledFastening with adhesive
Length Packing unit Article numberAlu silver matt 250cm 1 0 x 250cm 11 .1 5311
UG
25mm undrilledFastening with adhesive
Length Packing unit Article numberAlu silver matt 250cm 1 0 x 250cm 11 .1 5321
UG
(altern. 25mm)
DrilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0464
G
Cover strips
65
T-Profile 1 4mm | 25mmT-Profi le covers two floorings of equal height, for subsequent laying.Robust profi le 1 ,5mm thick, can also be bent for round shapes. Available in 2 widths: 1 4mm | 25mm.
Cover strip 20mmProfi le covers two floorings.Robust profi le 1 ,9mm thick, 3,5mm high.
DrilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0480Alu gold 270cm 1 0 x 270cm 11 .1 0490Alu bronze 270cm 1 0 x 270cm 11 .1 0500Brass 270cm 1 0 x 270cm 11 .1 051 0
G
Self-adhesiveWith two transparent adhesive laces
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0481Alu gold 270cm 1 0 x 270cm 11 .1 0491Alu stainless steel 270cm 1 0 x 270cm 11 .1 0502
SK
Cover strips
66
Cover strip 25mmProfi le covers two floorings.Robust profi le 2,2mm thick, 3,0mm high with bridges, fluted.
Load depends on the thickness of the floor profi les, at a pointload of more than 500kg in the commercial sector werecommend the use of industrial profi les with bridges.
DrilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0473Alu si lver matt 270cm 1 0 x 270cm 11 .1 0704Alu gold 270cm 1 0 x 270cm 11 .1 0474Alu bronze 270cm 1 0 x 270cm 11 .1 0475Brass polished 270cm 1 0 x 270cm 11 .1 0421Stainless steel 270cm 1 0 x 270cm 11 .1 0431
Length Packing unit Article numberAlu silver 90cm 6 x 90cm DIY 11 .1 2090Alu si lver matt 90cm 6 x 90cm DIY 11 .1 2095Alu gold 90cm 6 x 90cm DIY 11 .1 2092Alu bronze 90cm 6 x 90cm DIY 11 .1 2094
G
Self-adhesiveWith two transparent adhesive laces
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0724Alu si lver matt 270cm 1 0 x 270cm 11 .1 0706Alu gold 270cm 1 0 x 270cm 11 .1 0725Alu bronze 270cm 1 0 x 270cm 11 .1 0726Brass polished 270cm 1 0 x 270cm 11 .1 071 2Stainless steel 270cm 1 0 x 270cm 11 .1 071 4Stainless steel brushed 270cm 1 0 x 270cm 11 .1 071 3
Length Packing unit Article numberAlu silver 90cm 6 x 90cm DIY 11 .1 21 24Alu si lver matt 90cm 6 x 90cm DIY 11 .1 21 07Alu gold 90cm 6 x 90cm DIY 11 .1 21 26Alu bronze 90cm 6 x 90cm DIY 11 .1 21 28
SK
67
Cover strips
Cover strip 30mmProfi le covers two floorings. Robust profi le aluminium: 2,2mm thick, 5,5mm high,brass: 1 ,25mm, stainless steel: 1 ,00mm.
DrilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0370Alu gold 270cm 1 0 x 270cm 11 .1 0372Alu bronze 270cm 1 0 x 270cm 11 .1 0374
G
Self-adhesiveWith two transparent adhesive laces
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0381Alu si lver matt 270cm 1 0 x 270cm 11 .1 0389Alu gold 270cm 1 0 x 270cm 11 .1 0383Alu bronze 270cm 1 0 x 270cm 11 .1 0385
SK
68
Cover strips
Cover strip 30mm for hard floor coveringsProfi le covers two floorings. Due to the low profi le height especial ly suitable for hard surfaces.Robust profi le aluminium: 2,2mm thick, 3,6mm high.
DrilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0472Alu gold 270cm 1 0 x 270cm 11 .1 0470Alu bronze 270cm 1 0 x 270cm 11 .1 0471
Length Packing unit Article numberAlu silver 90cm 6 x 90cm DIY 11 .1 21 34Alu gold 90cm 6 x 90cm DIY 11 .1 21 30Alu bronze 90cm 6 x 90cm DIY 11 .1 21 32
G
Self-adhesiveWith two transparent adhesive laces
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0282Alu gold 270cm 1 0 x 270cm 11 .1 0280Alu bronze 270cm 1 0 x 270cm 11 .1 0281
Length Packing unit Article numberAlu silver 90cm 6 x 90cm DIY 11 .1 21 37Alu gold 90cm 6 x 90cm DIY 11 .1 21 36Alu bronze 90cm 6 x 90cm DIY 11 .1 21 38
SK
69
Cover strips
Cover strip 36mmFlat profi le covers two floorings, fluted.Robust profi le 2,5mm thick, 2,5mm high.
When laying self-adhesive profi les, the surface must be cleanand grease-free. In the case of sanded surfaces werecommend the treatment with a primer. Please press theprofi le after positioning firmly to the floor.
DrilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0476Alu si lver matt 270cm 1 0 x 270cm 11 .1 0720Alu gold 270cm 1 0 x 270cm 11 .1 0477Alu bronze 270cm 1 0 x 270cm 11 .1 0478Brass polished 270cm 1 0 x 270cm 11 .1 041 0
Length Packing unit Article numberAlu silver 90cm 6 x 90cm DIY 11 .1 21 40Alu si lver matt 90cm 6 x 90cm DIY 11 .1 21 41Alu gold 90cm 6 x 90cm DIY 11 .1 21 42Alu bronze 90cm 6 x 90cm DIY 11 .1 21 44
G
Self-adhesiveWith two transparent adhesive laces
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 071 6Alu si lver matt 270cm 1 0 x 270cm 11 .1 071 9Alu gold 270cm 1 0 x 270cm 11 .1 071 7Alu bronze 270cm 1 0 x 270cm 11 .1 071 8Brass polished 270cm 1 0 x 270cm 11 .1 0728
Length Packing unit Article numberAlu silver 90cm 6 x 90cm DIY 11 .1 21 50Alu si lver matt 90cm 6 x 90cm DIY 11 .1 21 53Alu gold 90cm 6 x 90cm DIY 11 .1 21 52Alu bronze 90cm 6 x 90cm DIY 11 .1 21 54
SK
70
Cover strips
Cover strip 40mmProfi le covers two floorings.Robust profi le aluminium: 2,0mm thick, 5,3mm high, brass: 1 ,5mm thick.
DrilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0445
G
UndrilledFastening with adhesive
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0444
UG
71
Cover strips
Cover strip 50mmProfi le covers two floorings, can also be used as a protection strip on walls.Robust profi le 3,0mm thick, 5,5mm high.
Load depends on the thickness of the floor profi les, at a pointload of more than 500kg in the commercial sector werecommend the use of industrial profi les with bridges.
UndrilledFastening with adhesive
Length Packing unit Article numberAlu silver 300cm 1 0 x 300cm 11 .1 0582
UG
UndrilledFastening with adhesive
Length Packing unit Article numberAlu silver 300cm 1 0 x 300cm 11 .1 0585
UG
72
Cover strips
Cover strip 60mm - industrial profileProfi le covers two floorings and expansion joints, can also be used as protection strip on walls.Robust profi le 2,0mm thick, 4,0mm high with bridges, fork l ift proof.
Cover strip 80mm - industrial profileProfi le covers two floorings and expansion joints, can also be used as protection strip on walls.Robust profi le 2,0mm thick, 4,0mm high with bridges, fork l ift proof.
UndrilledFastening with adhesive
Length Packing unit Article numberAlu silver 300cm 1 0 x 300cm 11 .1 0592
UG
73
Cover strips
Cover strip 1 00mm - industrial profileProfi le covers two floorings and expansion joints, can also be used as protection strip on walls.Robust profi le 2,0mm thick, 4,0mm high with bridges, fork l ift proof.
2,0mm drilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0525Alu si lver matt 270cm 1 0 x 270cm 11 .1 0526
G
GDrilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0351
74
Edge trims
Edge trim 2,0mmRamp profi le for thin floor coverings up to 2,0mm.
Edge trim 2,8mmRobust Edge Trim for l ino, PVC and cork up to 2,8mm.
DrilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0232
G
DrilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0361
G
75
Edge trims
Edge trim 5mmAdaptable Edge Trim for floor coverings up to 5mm.
Edge trim 5mmRobust Edge Trim for floor coverings up to 5mm.
GDrilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 1 070Alu gold 270cm 1 0 x 270cm 11 .1 1 080Alu bronze 270cm 1 0 x 270cm 11 .1 1 090
Length Packing unit Article numberAlu silver 90cm 6 x 90cm DIY 11 .1 2040Alu gold 90cm 6 x 90cm DIY 11 .1 2042Alu bronze 90cm 6 x 90cm DIY 11 .1 2044
DrilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0400
G
76
Edge trims
Base rdge trim 5mmEdge Trim for floor coverings up to 5mm, with insertion, fluted.
Edge trim 6mmRobust Edge Trim for floor coverings up to 6mm, with insertion,can also be used as baseboard.
GDrilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0240Alu gold 270cm 1 0 x 270cm 11 .1 0250Alu bronze 270cm 1 0 x 270cm 11 .1 0260
Length Packing unit Article numberAlu silver 90cm 6 x 90cm DIY 11 .1 2020Alu gold 90cm 6 x 90cm DIY 11 .1 2022Alu bronze 90cm 6 x 90cm DIY 11 .1 2024
DrilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 021 0Alu gold 270cm 1 0 x 270cm 11 .1 0230Alu bronze 270cm 1 0 x 270cm 11 .1 0220
G
Edge trims
Edge trim 1 2mmAll-purpose Edge Trim for carpets and other floor coverings, adaptable. With extra strip for easy laying of carpets.
Cover strip "zig-zag"Multi-purpose profi le in height and variance, covers two floorings of equal or different heights, can also be used as Edge Trim.Adjustable by compressing, fluted.
77
Profi les may but not needed to be deformed in thecompression zone. While compressing the profi le werecommend to use a rubber hammer in conjunction with awood strip to avoid damage to the profi le.
3,5mm drilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0551Alu gold 270cm 1 0 x 270cm 11 .1 0552Alu bronze 270cm 1 0 x 270cm 11 .1 0553
G
SK3,5mm self-adhesiveWith two transparent adhesive laces
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0555
8mm drilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 1 400Alu gold 270cm 1 0 x 270cm 11 .1 1 41 0
G
8mm self-adhesiveWith two transparent adhesive laces
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 1 401
SK
1 0mm drilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 1 439Alu gold 270cm 1 0 x 270cm 11 .1 1 440
G
1 0mm self-adhesiveWith two transparent adhesive laces
Länge Packing unit ArtikelnummerAlu silver 270cm 1 0 x 270cm 11 .1 1 438
SK
1 5mm drilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 1 470
G
SK1 5mm self-adhesiveWith two transparent adhesive laces
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 1 471
Edge trims
Edge trim 3,5mm | 8mm | 1 0mm | 1 5mmRamp profi le for thin floor coverings from 3,5mm up to 1 5mm.Fluted.
78
7,2mm drilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 1 690Alu si lver matt 270cm 1 0 x 270cm 11 .1 1 695Alu gold 270cm 1 0 x 270cm 11 .1 1 692
G
8,2mm drilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 1 700Alu gold 270cm 1 0 x 270cm 11 .1 1 702Alu bronze 270cm 1 0 x 270cm 11 .1 1 704
G
79
Parquet profiles
Parquet edge trimUsed to insert parquet and laminate, with high insertion depth al lowing space for expansion.Available in 6 heights: 7,2mm | 8,2mm | 1 0,2mm | 11 ,2mm | 1 4,2mm | 1 5,2mm.
1 4,2mm drilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 1 725Alu gold 270cm 1 0 x 270cm 11 .1 1 727Alu bronze 270cm 1 0 x 270cm 11 .1 1 729
G
1 5,2mm drilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 1 730Alu gold 270cm 1 0 x 270cm 11 .1 1 732
G
1 0,2mm drilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 1 71 0Alu gold 270cm 1 0 x 270cm 11 .1 1 71 2Alu bronze 270cm 1 0 x 270cm 11 .1 1 71 4
G
7,2mm drilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 1 740Alu gold 270cm 1 0 x 270cm 11 .1 1 742
G
8,2mm drilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 1 750Alu gold 270cm 1 0 x 270cm 11 .1 1 752
G
1 4,2mm drilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 1 790
G
1 5,2mm drilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 1 800
G
80
Parquet profiles
Stair nosing for parquet and laminateProfi le for laminate and parquet on stairs. With high insertion depth al lowing space for expansion.Available in 4 heights: 7,2mm | 8,2mm | 1 4,2mm | 1 5,2mm. Fluted.
Including Torx screws set in a handy tubepackaging.
Available in: zinc-plated, yel low chromed,stainless steel colored orburnished.
2,9x6,5mm 2,9x9,5mm 3x30mm
Base profile 4mm
Dril led, fastening with screws
Length Packing unit Article numberAlu nature 270cm 1 0 x 270cm 11 .1 9004
Expansion joint profile
Dril led, fastening with screwsLength Packing unit Article number
Alu silver matt 270cm 1 0 x 270cm 11 .1 901 0Alu sand matt 270cm 1 0 x 270cm 11 .1 9011Alu stainless steel matt 270cm 1 0 x 270cm 11 .1 901 2Alu gold matt 270cm 1 0 x 270cm 11 .1 901 3Alu bronze matt 270cm 1 0 x 270cm 11 .1 901 4
Set of expansion joint profile and 4mm base profileTorx screws and dowels incldued
Length Packing unit Article numberAlu silver matt 270cm 5 x 270cm 11 .1 91 00Alu sand matt 270cm 5 x 270cm 11 .1 91 01Alu stainless steel matt 270cm 5 x 270cm 11 .1 91 02Alu gold matt 270cm 5 x 270cm 11 .1 91 03Alu bronze matt 270cm 5 x 270cm 11 .1 91 04
Length Packing unit Article numberAlu silver matt 90cm 6 x 90cm DIY 11 .201 00Alu sand matt 90cm 6 x 90cm DIY 11 .201 01Alu stainless steel matt 90cm 6 x 90cm DIY 11 .201 02Alu gold matt 90cm 6 x 90cm DIY 11 .201 03Alu bronze matt 90cm 6 x 90cm DIY 11 .201 04
System profiles
Expansion joint profile for LVT flooringsScrewable system profi le with a low base profi le of 4mm with a fi l igree shape to cover expansion joints and for beautiful ly shaped transitions between floorcoverings of the same height. For laying LVT floorings and laminate up to 7 mm height. Individual use due to the combination of base profi les and coverprofi les, which can be exchanged easily: expansion joint profi le, edge trim and adapting profi le in 5 anodized colors are available in individual rods or in a setpacked including proper Torx screws and dowels.
81
Base profile 4mm
Dril led, fastening with screws
Length Packing unit Article numberAlu nature 270cm 1 0 x 270cm 11 .1 9004
Edge trim
Dril led, fastening with screws
Length Packing unit Article numberAlu silver matt 270cm 1 0 x 270cm 11 .1 9020Alu sand matt 270cm 1 0 x 270cm 11 .1 9021Alu stainless steel matt 270cm 1 0 x 270cm 11 .1 9022Alu gold matt 270cm 1 0 x 270cm 11 .1 9023Alu bronze matt 270cm 1 0 x 270cm 11 .1 9024
Set of edge trim and 4mm base profileTorx screws and dowels incldued
Length Packing unit Article numberAlu silver matt 270cm 5 x 270cm 11 .1 9200Alu sand matt 270cm 5 x 270cm 11 .1 9201Alu stainless steel matt 270cm 5 x 270cm 11 .1 9202Alu gold matt 270cm 5 x 270cm 11 .1 9203Alu bronze matt 270cm 5 x 270cm 11 .1 9204
Length Packing unit Article numberAlu silver matt 90cm 6 x 90cm DIY 11 .20200Alu sand matt 90cm 6 x 90cm DIY 11 .20201Alu stainless steel matt 90cm 6 x 90cm DIY 11 .20202Alu gold matt 90cm 6 x 90cm DIY 11 .20203Alu bronze matt 90cm 6 x 90cm DIY 11 .20204
System profiles
Edge trim for LVT flooringsScrewable system profi le with a low base profi le of 4mm with a fi l igree shape to cover expansion joints and for beautiful ly shaped end of the floor coverings.For laying LVT floorings and laminate up to 7 mm height. Individual use due to the combination of base profi les and cover profi les, which can be exchangedeasily: expansion joint profi le, edge trim and adapting profi le in 5 anodized colors are available in individual rods or in a set packed including proper Torxscrews and dowels.
82
Including Torx screws set in a handy tubepackaging.
Available in: zinc-plated, yel low chromed,stainless steel colored orburnished.
2,9x6,5mm 2,9x9,5mm 3x30mm
Base profile 4mm
Dril led, fastening with screws
Length Packing unit Article numberAlu nature 270cm 1 0 x 270cm 11 .1 9004
Adapting profile
Dril led, fastening with screws
Length Packing unit Article numberAlu silver matt 270cm 1 0 x 270cm 11 .1 9030Alu sand matt 270cm 1 0 x 270cm 11 .1 9031Alu stainless steel matt 270cm 1 0 x 270cm 11 .1 9032Alu gold matt 270cm 1 0 x 270cm 11 .1 9033Alu bronze matt 270cm 1 0 x 270cm 11 .1 9034
Set of adapting profile and 4mm base profileTorx screws and dowels incldued
Length Packing unit Article numberAlu silver matt 270cm 5 x 270cm 11 .1 9300Alu sand matt 270cm 5 x 270cm 11 .1 9301Alu stainless steel matt 270cm 5 x 270cm 11 .1 9302Alu gold matt 270cm 5 x 270cm 11 .1 9303Alu bronze matt 270cm 5 x 270cm 11 .1 9304
Length Packing unit Article numberAlu silver matt 90cm 6 x 90cm DIY 11 .20300Alu sand matt 90cm 6 x 90cm DIY 11 .20301Alu stainless steel matt 90cm 6 x 90cm DIY 11 .20302Alu gold matt 90cm 6 x 90cm DIY 11 .20303Alu bronze matt 90cm 6 x 90cm DIY 11 .20304
System profiles
Adapting profile for LVT flooringsScrewable system profi le with a low base profi le of 4mm with a fi l igree shape to cover expansion joints and for beautiful ly shaped transitions between floorcoverings of different height. For laying LVT floorings and laminate up to 7 mm height. Individual use due to the combination of base profi les and coverprofi les, which can be exchanged easily: expansion joint profi le, edge trim and adapting profi le in 5 anodized colors are available in individual rods or in a setpacked including proper Torx screws and dowels.
83
Including Torx screws set in a handy tubepackaging.
Available in: zinc-plated, yel low chromed,stainless steel colored orburnished.
2,9x6,5mm 2,9x9,5mm 3x30mm
Base profile 7mm
Dril led, fastening with screws
Length Packing unit Article number7mm 270cm 1 0 x 270cm 11 .1 9007
Expansion joint profile
Dril led, fastening with screws
Length Packing unit Article numberAlu silver matt 270cm 1 0 x 270cm 11 .1 9040Alu sand matt 270cm 1 0 x 270cm 11 .1 9041Alu stainless steel matt 270cm 1 0 x 270cm 11 .1 9042Alu gold matt 270cm 1 0 x 270cm 11 .1 9043Alu bronze matt 270cm 1 0 x 270cm 11 .1 9044
Set of expansion joint profile and 7mm base profileTorx screws and dowels incldued
Length Packing unit Article numberAlu silver matt 270cm 5 x 270cm 11 .1 9400Alu sand matt 270cm 5 x 270cm 11 .1 9401Alu stainless steel matt 270cm 5 x 270cm 11 .1 9402Alu gold matt 270cm 5 x 270cm 11 .1 9403Alu bronze matt 270cm 5 x 270cm 11 .1 9404
Length Packing unit Article numberAlu silver matt 90cm 6 x 90cm DIY 11 .20400Alu sand matt 90cm 6 x 90cm DIY 11 .20401Alu stainless steel matt 90cm 6 x 90cm DIY 11 .20402Alu gold matt 90cm 6 x 90cm DIY 11 .20403Alu bronze matt 90cm 6 x 90cm DIY 11 .20404
System profiles
Expansion joint profile for parquetScrewable system profi le with a low base profi le of 7mm with a fi l igree shape to cover expansion joints and for beautiful ly shaped transitions between floorcoverings of the same height. For laying laminate and parquet up to 1 6mm height. Individual use due to the combination of base profi les and cover profi les,which can be exchanged easily: expansion joint profi le, edge trim and adapting profi le in 5 anodized colors are available in individual rods or in a set packedincluding proper Torx screws and dowels.
84
Including Torx screws set in a handy tubepackaging.
Available in: zinc-plated, yel low chromed,stainless steel colored orburnished.
2,9x9,5mm 2,9x1 3mm 2,9x1 6mm 3x30mm
Base profile 7mm
Dril led, fastening with screws
Length Packing unit Article number7mm 270cm 1 0 x 270cm 11 .1 9007
Edge trim
Dril led, fastening with screws
Length Packing unit Article numberAlu silver matt 270cm 1 0 x 270cm 11 .1 9050Alu sand matt 270cm 1 0 x 270cm 11 .1 9051Alu stainless steel matt 270cm 1 0 x 270cm 11 .1 9052Alu gold matt 270cm 1 0 x 270cm 11 .1 9053Alu bronze matt 270cm 1 0 x 270cm 11 .1 9054
Set of edge trim and 7mm base profileTorx screws and dowels incldued
Length Packing unit Article numberAlu silver matt 270cm 5 x 270cm 11 .1 9500Alu sand matt 270cm 5 x 270cm 11 .1 9501Alu stainless steel matt 270cm 5 x 270cm 11 .1 9502Alu gold matt 270cm 5 x 270cm 11 .1 9503Alu bronze matt 270cm 5 x 270cm 11 .1 9504
Length Packing unit Article numberAlu silver matt 90cm 6 x 90cm DIY 11 .20500Alu sand matt 90cm 6 x 90cm DIY 11 .20501Alu stainless steel matt 90cm 6 x 90cm DIY 11 .20502Alu gold matt 90cm 6 x 90cm DIY 11 .20503Alu bronze matt 90cm 6 x 90cm DIY 11 .20504
System profiles
Edge trim for parquetScrewable system profi le with a low base profi le of 7mm with a fi l igree shape to cover expansion joints and for beautiful ly shaped end of the floor coverings.For laying laminate and parquet up to 1 6mm height. Individual use due to the combination of base profi les and cover profi les, which can be exchangedeasily: expansion joint profi le, edge trim and adapting profi le in 5 anodized colors are available in individual rods or in a set packed including proper Torxscrews and dowels.
85
Including Torx screws set in a handy tubepackaging.
Available in: zinc-plated, yel low chromed,stainless steel colored orburnished.
2,9x9,5mm 2,9x1 3mm 2,9x1 6mm 3x30mm
Base profile 7mm
Dril led, fastening with screws
Length Packing unit Article number7mm 270cm 1 0 x 270cm 11 .1 9007
Adapting profile
Dril led, fastening with screws
Length Packing unit Article numberAlu silver matt 270cm 1 0 x 270cm 11 .1 9060Alu sand matt 270cm 1 0 x 270cm 11 .1 9061Alu stainless steel matt 270cm 1 0 x 270cm 11 .1 9062Alu gold matt 270cm 1 0 x 270cm 11 .1 9063Alu bronze matt 270cm 1 0 x 270cm 11 .1 9064
Set of adapting profile and 7mm base profileTorx screws and dowels incldued
Length Packing unit Article numberAlu silver matt 270cm 5 x 270cm 11 .1 9600Alu sand matt 270cm 5 x 270cm 11 .1 9601Alu stainless steel matt 270cm 5 x 270cm 11 .1 9602Alu gold matt 270cm 5 x 270cm 11 .1 9603Alu bronze matt 270cm 5 x 270cm 11 .1 9604
Length Packing unit Article numberAlu silver matt 90cm 6 x 90cm DIY 11 .20600Alu sand matt 90cm 6 x 90cm DIY 11 .20601Alu stainless steel matt 90cm 6 x 90cm DIY 11 .20602Alu gold matt 90cm 6 x 90cm DIY 11 .20603Alu bronze matt 90cm 6 x 90cm DIY 11 .20604
System profiles
Adapting profile for parquetScrewable system profi le with a low base profi le of 7mm with a fi l igree shape to cover expansion joints and for beautiful ly shaped transitions between floorcoverings of different height. For laying laminate and parquet up to 1 6mm height. Individual use due to the combination of base profi les and cover profi les,which can be exchanged easily: expansion joint profi le, edge trim and adapting profi le in 5 anodized colors are available in individual rods or in a set packedincluding proper Torx screws and dowels.
86
Including Torx screws set in a handy tubepackaging.
Available in: zinc-plated, yel low chromed,stainless steel colored orburnished.
2,9x9,5mm 2,9x1 3mm 2,9x1 6mm 3x30mm
DrilledFastening with screws
Length Packing unit Article numberAlu silver 300cm 1 0 x 300cm 11 .1 0881Alu si lver matt 300cm 1 0 x 300cm 11 .1 0884
G
UndrilledFastening with adhesive
Length Packing unit Article numberAlu nature 300cm 1 0 x 300cm 11 .1 0883
UG
87
Stair nosings
Stair nosing 50x50mmAllpurpose stair nosing, fluted, tapered,ends to zero.
DrilledFastening with screws
Length Packing unit Article numberAlu silver 300cm 1 0 x 300cm 11 .1 0885Alu si lver matt 300cm 1 0 x 300cm 11 .1 0888
G
UndrilledFastening with adhesive
Length Packing unit Article numberAlu nature 300cm 1 0 x 300cm 11 .1 0887
UG
88
Stair nosings
Stair nosing 40x40mmAllpurpose stair nosing, fluted, tapered,ends to zero.
DrilledFastening with screws
Length Packing unit Article numberAlu silver 300cm 1 0 x 300cm 11 .1 1 040Alu si lver matt 300cm 1 0 x 300cm 11 .1 1 054Alu gold 300cm 1 0 x 300cm 11 .1 1 050Alu bronze 300cm 1 0 x 300cm 11 .1 1 060
G
UndrilledFastening with adhesive
Length Packing unit Article numberAlu silver 300cm 1 0 x 300cm 11 .1 1 042Alu si lver matt 300cm 1 0 x 300cm 11 .1 1 055Alu gold 300cm 1 0 x 300cm 11 .1 1 052Alu bronze 300cm 1 0 x 300cm 11 .1 1 062Alu nature 300cm 1 0 x 300cm 11 .1 1 044
UG
Self-adhesiveWith two transparent adhesive laces
Length Packing unit Article numberAlu silver 300cm 1 0 x 300cm 11 .1 1 041Alu si lver matt 300cm 1 0 x 300cm 11 .1 1 056Alu gold 300cm 1 0 x 300cm 11 .1 1 051Alu bronze 300cm 1 0 x 300cm 11 .1 1 061Alu nature 300cm 1 0 x 300cm 11 .1 1 047
SK
89
Stair nosings
Stair nosing 22x42mmAllpurpose stair nosing, fluted, tapered,ends to zero.
20x20mm fluted drilledFastening with screws
Length Packing unit Article numberBrass polished 270cm 1 0 x 270cm 11 .1 0600
G
30x30mm fluted drilledFastening with screws
Length Packing unit Article numberBrass polished 270cm 1 0 x 270cm 11 .1 061 0
G
20x20mm flat drilledFastening with screws
Length Packing unit Article numberBrass polished 270cm 1 0 x 270cm 11 .1 0601
G
90
Stair nosings and angle edges
Brass angle edge 20x20mm | 30x30mmAllpurpose angle edge made of premium polished brass, ends to zero.Fluted or flat. Available in 3 shapes.
DrilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0650Alu si lver matt 270cm 1 0 x 270cm 11 .1 0657Alu gold 270cm 1 0 x 270cm 11 .1 0660Alu bronze 270cm 1 0 x 270cm 11 .1 0670
Alu si lver 90cm 6 x 90cm DIY 11 .1 2240Alu si lver matt 90cm 6 x 90cm DIY 11 .1 2251Alu gold 90cm 6 x 90cm DIY 11 .1 2242Alu bronze 90cm 6 x 90cm DIY 11 .1 2244
G
Self-adhesiveWith two transparent adhesive laces
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0653Alu si lver matt 270cm 1 0 x 270cm 11 .1 0659Alu gold 270cm 1 0 x 270cm 11 .1 0663Alu bronze 270cm 1 0 x 270cm 11 .1 0673Alu stainless steel 270cm 1 0 x 270cm 11 .1 0676
Alu si lver 90cm 6 x 90cm DIY 11 .1 2247Alu si lver matt 90cm 6 x 90cm DIY 11 .1 2253Alu gold 90cm 6 x 90cm DIY 11 .1 2248Alu bronze 90cm 6 x 90cm DIY 11 .1 2249Alu stainless steel 90cm 6 x 90cm DIY 11 .1 2229
SK
91
Stair nosings and angle edges
Angle edge 20x24,5mmAll-purpose angle edge, ends to zero, fluted.Robust profi le 2,0mm thick.
DrilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0620Alu si lver matt 270cm 1 0 x 270cm 11 .1 0647Alu gold 270cm 1 0 x 270cm 11 .1 0630Alu bronze 270cm 1 0 x 270cm 11 .1 0640
Alu si lver 90cm 6 x 90cm DIY 11 .1 2230Alu si lver matt 90cm 6 x 90cm DIY 11 .1 2254Alu gold 90cm 6 x 90cm DIY 11 .1 2232Alu bronze 90cm 6 x 90cm DIY 11 .1 2234
G
Self-adhesiveWith two transparent adhesive laces.
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0623Alu si lver matt 270cm 1 0 x 270cm 11 .1 0649Alu gold 270cm 1 0 x 270cm 11 .1 0633Alu bronze 270cm 1 0 x 270cm 11 .1 0643
Alu si lver 90cm 1 0 x 90cm DIY 11 .1 2237Alu si lver matt 90cm 1 0 x 90cm DIY 11 .1 2256Alu gold 90cm 1 0 x 90cm DIY 11 .1 2238Alu bronze 90cm 1 0 x 90cm DIY 11 .1 2239
SK
92
Stair nosings and angle edges
Angle edge 1 0x24,5mmAll-purpose angle edge, ends to zero, fluted.Robust profi le 2,0mm thick.
DrilledFastening with screws
Length Packing unit Article numberAlu silver 300cm 1 0 x 300cm 11 .1 0944Alu gold 300cm 1 0 x 300cm 11 .1 0946Alu nature 300cm 1 0 x 300cm 11 .1 0945
G
Anti-slip insertion1 ,6mm thick, 49,1 mm wide, self-adhesive, soft granulate
Length Packing unit Article numberBlack 6,0m 1 x 6,0m 11 .1 0947Grey 6,0m 1 x 6,0m 11 .1 0948
93
Stair nosings
Stair nosing "Industria" with anti-slip insertAll-purpose profi le for stairs, for renovation and for industrial use.With premium exchangeable anti-sl ip insertion, 1 ,6mm thick, 49,1 mm wide, self-adhesive, rol l per 6m.
When screwing stair nosings together with tapes, the screwheads have to be laid flush with the profi le as supernatantsmay later cause unsightly marks or even cause damage to thetape.Note: Pay close attention to the proper laying temperature(approx. 20°C) in order to avoid shrinkage of the tape.Furthermore profi le and tape should have the same layingtemperature.Comment: Before instal l ing self-adhesive inserts, werecommend cleaning the profi le e.g. with delution. The profi lemust be clean and free of grease.Don't lay the insert tape under tension. After laying, press theinsert tape firmly with a rubber rol ler on to the profi le.
Anti-slip insertion2,0mm thick, 49,1 mm wide, self-adhesive, coarse granulate
Length Packing unit Article numberBlack 1 8,3m 1 x 1 8,3m 1 4.11 220
DrilledFastening with screws
Length Packing unit Article numberAlu silver 300cm 1 0 x 300cm 11 .1 0911Alu gold 300cm 1 0 x 300cm 11 .1 091 2
G
Anti-slip insertion28mm, self-adhesive, with a sl ightly brushed surface
Length Packing unit Article numberBlack 1 8,3m 1 x 1 8,3m 1 4.11 205Grey 1 8,3m 1 x 1 8,3m 1 4.11 206
94
Stair nosings
Stair nosing 30x58mm with insertAll –purpose profi le for stairs and edges. Ends to zero, edge rounded.Optional with exchangeable anti-sl ip insert, 28mm wide, self-adhesive, rol l per 1 8,3m.
When screwing stair nosings together with tapes, the screwheads have to be laid flush with the profi le as supernatantsmay later cause unsightly marks or even cause damage to thetape.Note: Pay close attention to the proper laying temperature(approx. 20°C) in order to avoid shrinkage of the tape.Furthermore profi le and tape should have the same layingtemperature.Comment: Before instal l ing self-adhesive inserts, werecommend cleaning the profi le e.g. with delution. The profi lemust be clean and free of grease.Don't lay the insert tape under tension. After laying, press theinsert tape firmly with a rubber rol ler on to the profi le.
Anti-slip insertion28mm, self-adhesive, with a rough surface
Length Packing unit Article numberBlack/Yellow 1 8,3m 1 x 1 8,3m 1 4.11 207
DrilledFastening with screws
Length Packing unit Article numberAlu silver 300cm 1 0 x 300cm 11 .1 0890Alu gold 300cm 1 0 x 300cm 11 .1 0900Alu bronze 300cm 1 0 x 300cm 11 .1 091 0
G
Anti-slip insertion1 4mm, self-adhesive, with a sl ightly brushed surface
Length Packing unit Article numberBlack 1 8,3m 1 x 1 8,3m 1 4.11 200Grey 1 8,3m 1 x 1 8,3m 1 4.11 201
95
Stair nosings
Stair nosing 1 8x38mm with insertAll –purpose profi le for stairs and edges. Ends to zero, edge rounded.Optional with exchangeable anti-sl ip insert, 1 4mm wide, self-adhesive, rol l per 1 8,3m.
When screwing stair nosings together with tapes, the screwheads have to be laid flush with the profi le as supernatantsmay later cause unsightly marks or even cause damage to thetape.Note: Pay close attention to the proper laying temperature(approx. 20°C) in order to avoid shrinkage of the tape.Furthermore profi le and tape should have the same layingtemperature.Comment: Before instal l ing self-adhesive inserts, werecommend cleaning the profi le e.g. with delution. The profi lemust be clean and free of grease.Don't lay the insert tape under tension. After laying, press theinsert tape firmly with a rubber rol ler on to the profi le.
Self-adhesiveWith two transparent adhesive laces
Length Packing unit Article numberAlu silver 300cm 1 0 x 300cm 11 .1 0677Alu si lver matt 300cm 1 0 x 300cm 11 .1 0687Alu gold 300cm 1 0 x 300cm 11 .1 0678Alu stainless steel 300cm 1 0 x 300cm 11 .1 0679
SK
96
Stair nosings and angle edges
Aluminium angle edge 25x25mmAll-purpose angle edge, with rounded edges.Robust profi le 1 ,5mm thick.
25x25mm self-adhesiveWith two transparent adhesive laces
Length Packing unit Article numberStainless steel 250cm 1 0 x 250cm 11 .1 061 2
SK
Stainless steel angle edgeAll-purpose angle edge
30x30mm self-adhesiveWith two transparent adhesive laces
Length Packing unit Article numberStainless steel 250cm 1 0 x 250cm 11 .1 061 4
SK
40x40mm self-adhesiveWith two transparent adhesive laces
Length Packing unit Article numberStainless steel 250cm 1 0 x 250cm 11 .1 061 6
SK
50x50mm self-adhesiveWith two transparent adhesive laces
Length Packing unit Article numberStainless steel 250cm 1 0 x 250cm 11 .1 061 8
SK
2,6x1 2mm drilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 1 021
G
G3,3x1 2mm drilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 1 024Alu gold 270cm 1 0 x 270cm 11 .1 1 025
97
Stair nosings
Stair nosing 2,6x1 2mm | 3,3x1 2mm for linoleumStair nosing for l ino, PVC and cork. Available in 2 sizes.With fi l igree edge.
DrilledFastening with screws
Length Packing unit Article numberAlu silver 300cm 1 0 x 300cm 11 .1 1 032
G
Stair nosing 3x20mm for linoleumStair nosing for l ino, PVC and cork.With fi l igree edge.
DrilledFastening with screws
Length Packing unit Article numberAlu nature 300cm 1 0 x 300cm 11 .1 1 01 6
G
DrilledFastening with screws
Length Packing unit Article numberAlu nature 300cm 1 0 x 300cm 11 .1 1 01 5
G
98
Stair nosings
Stair nosing 5mm for LVT flooringsStair nosing for LVT floorings, with very fi l igree edge.Dri l led on one side.
Stair nosing 2,8mm for LVT flooringsStair nosing for LVT floorings, with very fi l igree edge.Dri l led on both sides.
DrilledFastening with screws
Length Packing unit Article numberAlu silver 300cm 1 0 x 300cm 11 .1 1 01 0
G
DrilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 0980Alu gold 270cm 1 0 x 270cm 11 .1 0990Alu bronze 270cm 1 0 x 270cm 11 .1 1 000
G
99
Stair nosings
Stair nosing 5x40mmStair nosing for floor coverings up to 5mm. For renovation of stairs,with extra long part.
Stair nosing 5x1 5mmStair nosing for floor coverings up to 5mm. For renovation of stairs.
DrilledFastening with screws
Length Packing unit Article numberAlu silver 300cm 1 0 x 300cm 11 .1 1 063
G
DrilledFastening with screws
Length Packing unit Article numberAlu silver 270cm 1 0 x 270cm 11 .1 1 067Alu gold 270cm 1 0 x 270cm 11 .1 1 068Alu bronze 270cm 1 0 x 270cm 11 .1 1 069
G
1 00
Stair nosings
Vari – Stair nosingStair nosing for carpets on stairs and edges, adaptable.
Stair nosing 5x7mmStair nosing for floor coverings up to 5mm, with insertion, fluted.
DrilledFastening with screws
Length Packing unit Article numberAlu silver 300cm 1 0 x 300cm 11 .1 0845
G
PVC insert25mm wide
Length Packing unit Article numberBlack 25m 1 x 25m 11 .1 0850Grey 25m 1 x 25m 11 .1 0851Brown 25m 1 x 25m 11 .1 0860Black fluted 25m 1 x 25m 11 .1 0880
1 01
Stair nosings
Stair nosing 28mm with PVC-insertUniversal ly applicable on all stairs, ideal for renovation. Flat tapering.Profi le with exchangeable PVC anti-sl ip inserts, 25mm wide, rol l per 25m.
Pay close attention to the proper laying temperature (approx.20 ° C) in order to avoid shrinkage.Don't lay the insert tape under tension. After laying. The inlayis inserted by squeezing and optional ly fixed with glue points.
DrilledFastening with screws
Length Packing unit Article numberAlu silver 300cm 1 0 x 300cm 11 .1 0790
G
PVC insert25mm wide
Length Packing unit Article numberBlack 25m 1 x 25m 11 .1 0850Grey 25m 1 x 25m 11 .1 0851Brown 25m 1 x 25m 11 .1 0860Black fluted 25m 1 x 25m 11 .1 0880
1 02
Stair nosings
Stair nosing 28mm with PVC-insertStair nosing as edge trim to floor coverings up to 4,5mm.Profi le with exchangeable PVC anti-sl ip inserts, 25mm wide, rol l per 25m.
Pay close attention to the proper laying temperature (approx.20 ° C) in order to avoid shrinkage.Don't lay the insert tape under tension. After laying. The inlayis inserted by squeezing and optional ly fixed with glue points.
DrilledFastening with screws
Length Packing unit Article numberAlu silver 300cm 1 0 x 300cm 11 .1 0750Alu bronze 300cm 1 0 x 300cm 11 .1 0770Brass 270cm 1 0 x 270cm 11 .1 0780
G
PVC insert25mm wide
Length Packing unit Article numberBlack 25m 1 x 25m 11 .1 0850Grey 25m 1 x 25m 11 .1 0851Brown 25m 1 x 25m 11 .1 0860Black fluted 25m 1 x 25m 11 .1 0880
1 03
Stair nosings
Stair nosing 1 3,5mm with PVC-insertStair nosing as edge trim to floor coverings up to 4,5mm.Profi le with exchangeable PVC anti-sl ip inserts, 25mm wide, rol l per 25m.
Pay close attention to the proper laying temperature (approx.20 ° C) in order to avoid shrinkage.Don't lay the insert tape under tension. After laying. The inlayis inserted by squeezing and optional ly fixed with glue points.
Triangular stairrod1 6x1 6mm
Length Packing unit Article numberAlu silver 300cm 1 0 x 300cm 11 .1 1 258Alu gold glossy 300cm 1 0 x 300cm 11 .1 1 225
Clip outer side closed1 6x1 6mm
Length Packing unit Article numberNickel-plated 1 0 pair 11 .1 1 259Brassx 1 0 pair 11 .1 1 230
Other cl ips on request!
1 04
Stairrods
Triangular stairrod 1 6x1 6mmFor laying carpets on stairs.Triangular profi le in conjunction with cl ip, outer side closed.
DrilledFastening with screws
Length Packing unit Article numberSteel, zinced 1 00cm 30 x 1 00cm 11 .1 11 00
G
38mm drilledFastening with screws
Length Packing unit Article numberSteel, zinced 1 00cm 25 x 1 00cm 11 .1 111 0
G
1 05
Metal angles
Metal angle for repairing concrete stairsType S for concrete. 40mm width, 20mm depth.Screws and dowels included.
Metal angle for repairing wooden stairsFor renovating wooden stairs. 40mm width, 38mm depth.Screws included.
2-rowedNail height 4,8mm
Length Packing unit Article numberCarpet gripper 1 52,4cm 80 x 1 52,4cm 11 .1 001 0
3-rowedNail height 4mm
Length Packing unit Article numberCarpet gripper 1 22cm 70 x 1 22cm 11 .1 0050
1 06
Carpet grippers
Carpet gripper 2-rowedFor stretching carpets.2 rowed. Nail height approx. 4,8mm. Length 1 52,4cm.
Carpet gripper 3-rowedFor stretching carpets.3 rowed. Nail height approx. 4mm. Length 1 22cm.
Torx screw 2,9mm for system profilesFor screwing cover profi les with base profi le.In a handy tube packaging. Set á 5 tubes = 1 00 screws
Length Packing unit Article numberSilver 6,5mm 5x20 pieces 21 .99652Gold 6,5mm 5x20 pieces 21 .99654Bronze 6,5mm 5x20 pieces 21 .99656Stainless steel 6,5mm 5x20 pieces 21 .99658
Silver 9,5mm 5x20 pieces 21 .99952Gold 9,5mm 5x20 pieces 21 .99954Bronze 9,5mm 5x20 pieces 21 .99956Stainless steel 9,5mm 5x20 pieces 21 .99958
Silver 1 3mm 5x20 pieces 21 .991 32Gold 1 3mm 5x20 pieces 21 .991 34Bronze 1 3mm 5x20 pieces 21 .991 36Stainless steel 1 3mm 5x20 pieces 21 .991 38
Silver 1 6mm 5x20 pieces 21 .991 62Gold 1 6mm 5x20 pieces 21 .991 64Bronze 1 6mm 5x20 pieces 21 .991 66Stainless steel 1 6mm 5x20 pieces 21 .991 68
Torx screw 3mmFor screwing dri l led profi les, also base profi les.In a handy tube packaging. Set á 1 0 tubes = 1 00 screws and 1 00 dowels
Length Packing unit Article numberSilver 30mm 1 0x1 0 pieces 21 .99302Gold 30mm 1 0x1 0 pieces 21 .99304Bronze 30mm 1 0x1 0 pieces 21 .99306Stainless steel 30mm 1 0x1 0 pieces 21 .99308
Polymer assembly adhesive
Packing unit Article numberAssembly adhesive 1 2 units 1 8.1 2987Assembly adhesive Single can 1 8.1 2988
+ curses faster+ does not foam+ almost odourless+ free of si l icone
Bit for Torx screws 2,9mm
Length Packing unit Article numberBit T8 1 piece 21 .1 2369
Bit for Torx screws 3mm
Length Packing unit Article numberBit T1 0 1 piece 21 .1 2368
1 07
Mounting accessories
Packing unit Article numberIn the ROLL collection case "flooring profi les" 1 piece 11 .00001you wil l find a complete range of flooring profi les.
Index
AAbrasivesAdhesiveAngle edge profi lesAngle edgesAnti sl ipping grip tapeAssembly adhesive
BBladesBow for rol lerBroomBrush for nozzlesBullystripper
CCarpet gripperCarpet seam squeezerCartridge pistolCCM measuring instrumentsChairmatsCleaning padsCleaning tissuesCold welding l iquidCopper tapeCorner knifeCover stripsCover stripsCup wheelCurrent l imiter
DDiamond discDiamond grinderDiamond knife sharpenterDiamond padsDrive discDust maskDust separator
EEasysboardE-Cut for Multimaster and SupercutEdge sanderEdge trimmerEdge trimsEdge-bevel cutterEraserExpansion joint profi lesExtension cable
FFinishing trowelFlex spatulaFloor grinding machineFloor scriberFlooring scraper
GGrinding blockGrinding brushGrinding flashGrooving machine Easy
HHammerHand grinding machineHand grinding stoneHand grooverHand groover GroovyHeat bond ironHeight scriberHollow punchHoobnailed shoesHot air tool
IIndustrial vacuum cleaner
JJoint connectors
KKnee kickerKnivesKombi stretcherLaminate board cutter
495796905657
5144343226
1 063757455993935372965651 31 0
51 7335095821
58261 728742833631 0
41401 32927
27112730
381 72729283629334031
20
57
36523639
91
--1 8
-
92
73731 9
78
LLeister hot air tolLino rol lerLinocutterLiquid tankLoop pile cutterL-profi lesL-profi les
MMeasuring wedgeMetal anglesMil l ing discMinifloorMinistretcherMitre cut shearMixerMixing toolsMoisture indicatorMortar mixing toolMoulding l ifter
NNotched inserts
PPad holderPadsParquet profi lesParquet sanding machineParquet shunting toolParquet stripping bladeParquet U-profi lesPCD-discPCD-scraperPile brushPlanfräserPolycarbonate matsPressure corcPressure hammerPressure rol ler
QQuarter moon knife
RReißklaueRepair pasteRO-1 800, RO-2200, RO-3000RO-300, RO-250RollersRotorscraperRubber hammerRubber spatula
SSanding discsSanding discs for WoodySanding netsScraperScrews for profi lesSeam cutterSeam rollerShearsSingle disc machineSmooting discSpatulaSpatulasSpiked rol lerSpindle mixing toolSpray adhesiveSpreading knifeStair nosingsStair toolStairrodsSteel angleSteel nailsSteel rulerSteel wire brushStone grinding discStripe cutter for carpetsStripe cutter VarioStripper machinesSuperfinishing padsSuperpadsSurface temperature sensorSystem profi les for LVC flooringSystem profi les for parquet
31343011536262
461 0563136535555455537
43
99791 53839791 3537659343432
33
373531 34463839
91 51 0271 073037543827404055574187371 04465746883628231 09468184
6464
80
801 8
34
47
42
-
25
8285
1 9
-
1 03
26
8386
TTapping blockTelescopic armTemplate kit for stairsThreshold rulerTil ing profi lesT-profi lesTriangle scraperTrim guideTrimming knifeTrowelTungsten carbide discs
UUniversal cutter
VVacuum cleanerVacuum system for single disc mach.
WWall spacerWelding carWelding caseWelding machineWelding nozzlesWelding toolWood sanding discWoodyWool pad
383446426265293333417
53
204
39313231323181 51 0
64
50
Wir bringen Bewegung ins Werkzeug
GmbH
Visit us on social media
Albstrasse 1 272820 SonnenbühlGermany
Telefon +49 (0) 71 28/9280-0Telefax +49 (0) 71 28/9280-11E-Mail [email protected]
www.roll-gmbh.de