• Usage Reporting• ISO & QS9000 Quality Assurance• Freight Consolidation
• Certified Technicians • Rental Tools for Short or Long Term • Authorized Warranty Repair Facility
• International Shipping• Design & Engineering Support
• Technical Data & Images• Videos• Product Offerings & Sales
Byler Rivet Supply is a family-owned business whose customers are considered part of the family. We are forward thinking, financially sound, continually adding product lines and committed to providing fasteners & tooling on-time and with a personal touch. Each customer receives a dedicated salesman who continually looks for cost savings, new product offerings & new ways to support all areas of your business. As a global distributor, we sell fasteners and tooling worldwide and go beyond the normal scope of business to provide Inventory Management, Tool Repair & On-line services.
INVENTORY MANAGEMENTRely on Byler Rivet who keeps STOCK so you don’t have downtime. We provide quality products tailored for your company’s needs.
• Forecasting & Performance Reports• Bar Coding & Lot Traceability • Custom Packaging: Labels, Bags, Boxes
TOOL REPAIR & WARRANTY CENTERByler Rivet’s tool center repairs pneumatic & hydrualic rivet tools and offers tool parts, nose assemblies and technical support.
• Technical Help & Troubleshooting• Rapid Turn-Around on Repairs• Tool Schematics & Charts• Tool Parts & Nose Assemblies Stocked
GLOBAL SUPPLIER NETWORKOnce in a while, you can’t find what you need. Byler Rivet provides you access to millions of products & thousands of suppliers beyond the catalog.
Millions of Rivets, Fasteners & Tools IN STOCK! • Continual Product Additions• Consolidate Your Purchases• EXIM Bank Certified
ON-LINE SUPPORT & INFORMATIONByler Rivet keeps you plugged in to the latest industry news, product offerings, sales & technical videos to improve your riveting and tooling experience.
• Web Catalog• Detailed Product Descriptions• Newsletters
Table of ConTenTsRIVETS
2-3
28
25
24
4
9
7
6
10-11
23
12
13
14
15
16
17
18
27
1
26
19-22
8
5
ADHESIVES / SEALANTSManus-Bond®
Silaprene®
3637
THREADED INSERTS
BK
BL
BR
BT
Rivet Nuts / Well Nuts/ Jack Nuts
30
29
31
32
33
Sealed, Crimp & Solder / Sealed Solder / Sealed Crimp Sealed Multiple Wire Connectors / Sealed Heat Shrink Tubing / Kits
3435
ELECTRICAL CONNECTORS
Bulb-tites
Door Rivets / Semi-Tubular Rivets
Drive Rivets
Aluminum
Huck Magna-Loks
Klamp-Tites® / KTR’s and Magna-Tites®
Magna-Bulb®
Monobolts / Interlocks®
Multi-Grips®
Nylon Rivets
Peel and Tri-Fold Rivets
Pop RIvets
All Aluminum
Aluminum / Steel
All Steel
Stainless Steel
Closed End
Rivet Sets
Shavehead Rivets
Solid Rivets
Speed Fastening
T-Rivets and Q-Rivets
Ultra-Grips® and Klik-Loks®
Table of ConTenTs
TOOLING
63
70
64-65
60-62
66-67
68-69
INSERT BITS / DRILL BITS
59
57
53
58
52
55
54
56
NUTS, BOLTS, AND SCREWS
Rail Bolts, Bolts / Screws, Nuts, Washers 51
“FRP” FASTENERS
Camtainers®
Hucktainers®
5049
41
44
48
47
42-43
46
48
38-39
40
HIGH STRENGTH FASTENERS
Avdeloks®
Bobtail®
BOM®
C50L®
C6L® / C120® “Huck” Bolts / Collars
HP8®
Huck-Spin®
Magna-Grip® / Magna-Grip® Collars
Maxlok®
Decimal Equivalent Chart
Drill Sets
Floor Screws
Heavy Duty Drill Bits
Insert Bits & Bit Holders
Jobber Length Drill Bits
Mechanics Length Drill Bits
Screw Machine & Specialty Drill Bits
Avdel® Tooling
Chicago Pneumatic® Tooling
Gesipa® Tooling
Huck® Tooling & Power Rigs
POP® Tooling
Threaded Insert Tooling
Tel: 800-325-3147 or 972-986-6792
1
“shavehead” riveTs
Standard Head 5/8” Dia. Head
shaveable “bulb-Tite®” rivets
THE BLIND RIVET WITH A SOLID RIVET APPEARANCEInstallation is Simple!
HS310-5B (5/32” rivets)Part # 497608
This man is demonstrating the Shaving Tool. The shaver (in a standard 3/8" drill) polishes the “Shavehead” rivet to give you a solid rivet appearance.
PULL SNIP SHAVE
~ For tooling to set these rivets see pages 66-67 ~
Neoprene washer(optional)
5/32” available with or without EPDM washer. 3/16” & 1/4” stocked with EPDM washer.
HS310 Shaving Tool
Part # 497601
RV57 Side Nipper
HS310-6B (3/16”- 1/4” rivets)Part # 497609
HS310-6S (1/4” rivets with 5/8” head diameter)Part # 497612
BEFORE
AFTER
TYPE OFRIVET DIA. BYLER PART # GRIP RANGE HOLE
SIZEDRILL
NO.
DIMENSIONS STRENGTHSA
MAXB
MAXD
MAX F SHEAR TENSILE
Brazier Head
Aluminum
5/32 14105050801 .020 -.312 .162-.167 #2016639130 .328 .077 .161 .920 465 245
3/16
141050603211410506042114105060621141050608211410506102114105061201
.020-.187
.050-.250
.050-.375
.050-.500
.050-.625
.050-.750
.209-.221 #416638970 .492 .105 .205
.872
.9351.0601.1851.3101.435
740 460
1/4 141050808011410508080625 .050-.500 .250-.263 1/4”
16687040.492.625
.125
.125 .246 1.2551.255
11001100
675675
Tel: 800-325-3147 or 972-986-6792
2
bUlb-TiTes
The Bulb-Tite is a high strength, non-hole filling blind rivet that forms a large three-legged footprint on the backside of the work.
It gets its amazing clamping power from the patented upsetting action. When the rivet is pulled (by either hand or power tool) the three slotted hollow sleeve segments compress into bulbs. These rivet legs (bulbs) bear against the material’s back surface with such force that separated sheets are securely clamped together. The clamp-up action is comparable to the compression of a nut and bolt at full torque.
RV6601/RV6671
RV6602
RV6603
HEAD STYLES
One Rivet Size Through Thick or Thin!
Works in Straight or Curved Surfaces! These blind rivets work well in tubing or applications where there are irregular surfaces. The three large “legs” or bulbs conform to curves making them ideal for attaching hardware to pipes, corrugations, tubes, and other curved shapes. Secures hard to fasten materials! Non-critical hole size!
Bulb-tites function in materials where other fasteners fail! They can be installed in fiberglass without crazing and plastics without cracking. They fasten thick or thin, hard or soft metal sheets, hard board, foam-cored panels, reinforced plastic and plywood. They can not be overdriven or stripped out. The rivet mandrels remain intact and break flush with the fastener head.
They also work well with attaching materials where holes are mismatched or oversized.
RV6604
RV6605
RV6606/RV6676RV6696
RV6607
All Byler Part #’s shown on page 3 with EPDM washer included. (01 at the end of the number denotes with washer)
ex: RV6604-06-08 = 14104060801
Countersunk (RV6601) and Flathead (RV6602) bulbtites are standard without EPDM washer.
ex: RV6601-06-04 = 14101060400
D
A
B 82º
LF max.
AB
D
LF max.
BD
LF max.
A
Neoprene washer(optional)
90ºB
A
AD
LF max.
Neoprene washer(optional)
90ºB
A
AD
L
F max.
Neoprene washer(optional)
A
A
B
L
D
Neoprene washer(optional)
Neoprene washer(optional)
D
B
A
A
L
F max.
F max.
Tel: 800-325-3147 or 972-986-6792
3
bUlb-TiTesTYPE OF
RIVETMFG
Head # DIA. MFGPART #
BYLERPART #
GRIPRANGE
HOLE SIZE DIMENSIONS VALUES IN LBS.
DRILL # A B D F SHEAR TENSILE
COUNTERSUNK HEAD
Aluminum Rivet/Aluminum Mandrel
(no washer)
RV6601
3/16
RV6601-0604RV6601-0606RV6601-0608RV6601-0610RV6601-0612
1410106040014101060600141010608001410106100014101061200
.106-.250
.187-.375
.312-.500
.437-.625
.563-.750
.209-.221#4
.372Min .103 .205
.9351.0601.1851.3101.435
740 460
1/4RV6601-0804RV6601-0806RV6601-0808
141010804001410108060014101080800
.150-.250
.187-.375
.250-.500.250-.263
1/4".480Min .147 .246
1.0051.1301.255
1100 675
FLAT HEADAluminum Rivet/
Aluminum Mandrel(no washer)
RV6602 5/32RV6602-0504RV6602-0506RV6602-0508
141020504001410205060014102050800
.125-.250
.187-.375
.250-.500.162-.167
#20.367Max .047 .161
.862
.9871.112
465 245
3/16
RV6602-0604RV6602-0606RV6602-0608RV6602-0610RV6602-0612
1410206040014102060600141020608001410206100014102061200
.125-.250
.187-.375
.250-.500
.375-.625
.500-.750
.209-.221#4
.443Max .062 .205
.9351.0601.1851.3101.435
740 460
DOME HEAD Aluminum Rivet/
Aluminum Mandrel
RV6604
5/32 RV6604-0504RV6604-0508
1410405040114104050801
.067-.250
.250-.500.162-.167
#20.343Max .074 .161 .925
1.112 465 245
3/16
RV6604-0603RV6604-0604RV6604-0606RV6604-0608RV6604-0610RV6604-0612
141040603011410406040114104060601141040608011410406100114104061201
.050-.187
.062-.250
.187-.375
.312-.500
.437-.625
.563-.750
.209-.221#4
.443 Max .093 .205
.872
.9351.0601.1851.3101.435
740 460
1/4RV6604-0804RV6604-0806RV6604-0808RV6604-0810
14104080401141040806011410408080114104081001
.062-.250
.125-.375
.250-.500
.375-.625
.250-.2631/4"
.560Max .118 .246
1.0051.1301.2351.360
1100 675
RV66039/32
RV6603-0903RV6603-0906RV6603-0910RV6603-0912
14107090301141070906011410709100114107091201
.032-.187
.032-.375
.250-.625
.375-.750
.308-.3275/16
.615Max .150 .304
1.0001.3251.5751.700
1500 1100
LARGE FLANGE HEAD
Aluminum Rivet/Aluminum Mandrel
RV66059/32
RV6605-0906RV6605-0910RV6605-0912
141080906011410809100114108091201
.042-.375
.250-.625
.375-.750.308-.327
5/16.743Max .150 .304
1.3251.5751.700
1500 1100
LOW PROFILEDOME HEAD
Aluminum Rivet/Aluminum Mandrel
RV66063/16
RV6606-0603RV6606-0604RV6606-0606RV6606-0608RV6606-0610RV6606-0612
141060603011410606040114106060601141060608011410606100114106061201
.050-.187
.062-.250
.187-.375
.312-.500
.437-.625
.563-.750
.209-.221#4
.469Max .099 .205
.872
.9351.0601.1851.3101.435
740 460
1/4RV6606-0804RV6606-0806RV6606-0808RV6606-0810
14106080401141060806011410608080114106081001
.040-.250
.125-.375
.250-.500
.375-.625
.250-.2631/4"
.543Max .116 .246
1.0051.1301.2351.360
1100 675
SHAVEABLEBRAZIER HEADAluminum Rivet/
Aluminum Mandrel
RV6607 5/32 RV6607-0505 14105050801 .020-.312 .162-.167#20
.312Max .077 .161 0.920 465 245
3/16RV6607-0606RV6607-0608RV6607-0612
141050606211410506082114105061221
.050-.375
.050-.375
.050-.750.209-.221
#4.469Max .105 .205
1.061.06
1.185740 460
1/4 RV6607-0808 14105080801 .050-.500 .250-.2631/4"
.469Max .125 .246 1.255 1100 675
COUNTERSUNK HEAD
Steel Rivet/Steel Mandrel
RV66711/4
RV6671-0804RV6671-0806RV6671-0808
142010804001420108060014201080800
.150-.250
.187-.375
.250-.500.250-.263
1/4".494Max .147 .246
1.0051.1301.355
1835 1000
LOW PROFILEDOME HEADSteel Rivet/
Steel Mandrel
RV6676
1/4
RV6676-0804RV6676-0806RV6676-0808RV6676-0810
14206080401142060806011420608080114206081001
.040-.250
.125-.375
.250-.500
.375-.625
.250-.2631/4"
.542Max .116 .246
1.0051.1301.2551.380
1850 1025
DOME HEADMonel Rivet/
Stainless Mandrel
RV6696 RV6696-0804RV6696-0806RV6696-0808RV6696-0810
14306080401143060806011430608080114306081001
.040-.250
.125-.375
.250-.500
.375-.625
.250-.2631/4"
.542Max .116 .246
1.0051.1301.2551.380
2100 1455
Tel: 800-325-3147 or 972-986-6792
4
Benefits:• A structural hole-filling fastener with a flush pin break!• Contains unique solid-circle lock that ensures maximum strength and resistance to vibration!
MaGna-loKs®
TYPE OFRIVET DIA. MFG
PART # BYLER PART # GRIPRANGE
RIVET DIMENSIONS MIN. VALUES IN LBS. HOLESIZEB C D E SHEAR TENSILE
PROTRUDING HEADAluminum Rivet/
Aluminum Mandrel
3/16 MGLP-B6-4 MGLP-B6-7 MGLP-B6-E
401110604140111060714011106004
.062-.270
.214-.437
.062-.437
.385
.385
.385
.085
.085
.085
.415
.572
.572
.675
.825
.950600 500 .191-.201
1/4 MGLP-B8-6
MGLP-B8-10 MGLP-B8-E
4011108061401110810
4011108004
.080-.375
.350-.625
.080-.625
.525
.525
.525
.117
.117
.117
.560
.810
.810
.9701.2201.405
1300 890 .261-.272
3/8* MGLP-B12-12MGLP-B12-18
401111212401111218
.120-.560.625-1.125
.787
.787.175.175
.8401.400
1.6502.215 2950 1900 .392-.408
TRUSS HEADAluminum Rivet/
Aluminum Mandrel
3/16 MGLT-B6-4 MGLT-B6-7 MGLT-B6-E
402110604402110607
4021106004
.062-.270
.214-.437
.062-.437
.500
.500
.500
.085
.085
.085
.415
.572
.572
.675
.825
.950600 500 .191-.201
1/4 MGLT-B8-6
MGLT-B8-10 MGLT-B8-E
402110806402110810
4021108004
.080-.375
.350-.625
.080-.625
.588
.588
.588
.117
.117
.117
.560
.810
.810
.9701.2201.405
1300 890 .261-.272
COUNTERSUNK HEAD
Aluminum Rivet/Aluminum Mandrel
3/16 MGL100-B6-6 MGL100-B6-9
403110606403110609
.125-.331
.305-.500.345.345
.070
.070.486.653
.762
.929 600 500 .191-.201
1/4 MGL100-B8-8 MGL100-B8-12
403110808403110812
.160-.475
.415-.725.405.405
.079
.079.660.910
1.0591.309 1300 890 .261-.272
PROTRUDING HEADSteel Rivet/
Steel Mandrel
3/16 MGLP-R6-4 MGLP-R6-7 MGLP-R6-E
40122106041140122106071140122106011
.062-.270
.214-.437
.062-.437
.385
.385
.385
.085
.085
.085
.415
.572
.572
.675
.825
.9501300 1200 .191-.201
1/4
MGLP-R8-6 MGLP-R8-10 MGLP-R8-EMGLP-R8-14MGLP-R8-18MGLP-R8-22
401221080611401221081011401221080011401221081411401221081811401221082211
.080-.375
.350-.625
.080-.625
.580-.875.830-1.125
1.080-1.375
.525
.525
.525
.525
.525
.525
.117
.117
.117
.117
.117
.117
.560
.810
.8101.0601.3101.560
.9701.2201.4051.4991.7991.999
2500 2200 .261-.272
3/8* MGLP-R12-12MGLP-R12-18
40122121214012212181
.120-.625.625-1.125
.787
.787.175.175
.8401.400
1.6502.215 5600 4000 .392-.408
TRUSS HEADSteel Rivet/
Steel Mandrel
3/16 MGLT-R6-4 MGLT-R6-7 MGLT-R6-E
402221060414022210607140222106001
.062-.270
.214-.437
.062-.437
.500
.500
.500
.085
.085
.085
.415
.572
.572
.675
.825
.9501300 1200 .191-.201
1/4 MGLT-R8-6
MGLT-R8-10 MGLT-R8-E
40222108061140222108101140222108001
.080-.375
.350-.625
.080-.625
.588
.588
.588
.117
.117
.117
.560
.810
.810
.9701.2201.405
2500 2200 .261-.272
COUNTERSUNK HEAD
Steel Rivet/Steel Mandrel
3/16 MGL100-R6-6 MGL100-R6-9
4032210606140322106091
.125-.331
.305-.500.345.345
.070
.070.486.653
.762
.929 1300 1200 .191-.201
1/4 MGL100-R8-8 MGL100-R8-12
40322108084032210812
.160-.475
.415-.725.405.405
.079
.079.660.910
1.0591.309 2500 2200 .261-.272
3/8* MGL100-R12-12MGL100-R12-20
40322112124032211220
.240-.750.740-1.250
.627
.627.127.127
1.0201.520
1.6702.230 6000 4000 .392-.408
PROTRUDING HEADStainless Steel Rivet/
Stainless Steel Mandrel
3/16 MGLP-U6-4 MGLP-U6-7
401330604401330607
.062-.270
.214-.437.385.385
.085
.085.415.572
.675
.825 1300 950 .191-.201
1/4 MGLP-U8-6
MGLP-U8-10MGLP-U8-E
401330806401330810
4013308001
.080-.375
.350-.625
.080-.625
.525
.525
.525
.117
.117
.117
.560
.810
.810
.9701.2201.405
2350 1800 .261-.272
3/8* MGLP-U12-12MGLP-U12-18
401331212401331218
.120-.625.625-1.125
.787
.787.175.175
.8301.400
1.6502.215 5300 4000 .392-.408
COUNTERSUNK HEAD
Stainless Steel Rivet/Stainless Steel
Mandrel
3/16 MGL100-U6-6 MGL100-U6-9
403330606403330609
.125-.331
.305-.500.345.345
.070
.070.486.653
.762
.929 1300 950 .191-.201
1/4 MGL100-U8-8 MGL100-U8-12
403330808403330812
.160-.475
.415-.725.405.405
.079
.079.660.910
1.0591.309 2350 1800 .261-.272
Drill Size3/16 = #111/4 = “G”3/8 = “X”
BC
DE
Protruding HeadMGLP
BC
DE
Truss HeadMGLT
BC
DE
Countersunk HeadMGL100
*3/8 must use a 256 tool and 592993318 pulling head for installation
Tel: 800-325-3147 or 972-986-6792
5
UlTra-Grips® and KliK-loKs®
installation Tooling
Dome Head Large Flanged Head 100º Countersunk Head
POP ULTRA-GRIPS® MARSON KLIK-LOKS®
TYPE DIA. MFG. # BYLER # MFG. # BYLER # GRIPRANGE
RIVET DIMENSIONS MIN. VALUES IN LBS.B C D E SHEAR TENSILE HOLE SIZE
DOME All Aluminum
3/16AD6270UGAD6437UG
AD6437UGX
3911060417391106071413911060717
AB6-4AKLAB6-7AKLAB6-AEKL
401110604140111060714011106004
.062-.270
.214-.437
.062-.037.385 .085
.415
.572
.572
.675
.825
.950700 500 .191-.201
1/4AD8375UGAD8625UG
AD8625UGX
3911080617391108101413911081017
AB8-6AKLAB8-10AKLAB8-AEKL
40111080614011108104011108101
.080-.375
.350-.625
.080-.625.525 .117
.560
.810
.810
.9701.2201.405
1300 890 .261-.272
COUNTERSUNK All Aluminum
3/16 AK6331UGAK6500UG
3911060617239110609172 *see pg 4 *see pg 4 .125-.331
.305-.500 .345 .070 .486.653
.795
.929 700 500 .191-.201
1/4 AK8475UG 39110808172 *see pg 4 *see pg 4 .160-.475 .405 .079 .660 1.059 1300 890 .261-.272LARGE FLANGE
All Aluminum 3/16 *see pg 4 *see pg 4 ABL6-4AKLABL6-7AKL
402110604402110607
.062-.270 .214-.437 .500 .085 .415
.572.675.825 700 500 .191-.201
DOME All Steel
3/16SD6270UGSD6437UG
SD6437UGX
3912060417
3912060717
SB6-4KLSB6-7KLSB6-EKL
40122106041140122106071140122106001
.062-.270
.214-.437
.062-.437.395 .085
.415
.572
.572
.675
.825
.9501450 1200 .191-.201
1/4SD8375UGSD8625UG
SD8625UGX
3912080617391208101173912081017
SB8-6KLSB8-10KLSB8-EKL
401221080611401221081011401221080011
.080-.375
.350-.625
.080-.625.525 .117
.560
.810
.810
.9701.2201.405
2750 2200 .261-.272
LARGE FLANGE All Steel
3/16 SD6270UGLFSD6437UGLF
3912060417339120607173
SBL6-4KLSBL6-EKL
4022210604140222106001
.062-.270
.062-.437 .500 .095 .572.415
.950
.675 1300 1200 .191-.201
1/4 *see pg 4 *see pg 4 SBL8-6KL 402221080611 .080-.375 .588 .117 .560 .970 2750 2200 .261-.272
COUNTERSUNK All Steel
3/16 SK6331UGSK6500UG
3912060617239120609172
SC6-6KLSC6-9KL
4032210606140322106091
.125-.331
.350-.500 .345 .070 .486.653
.795
.929 1450 1200 .191-.20
1/4 SK8475UGSK8725UG
3912080817239120812172
SC8-8KLSC8-12KL
40322108084032210812
.160-.475
.415-.725 .405 .079 .660.910
1.0591.309 2750 2200 .261-.272
DOME All Stainless
3/16 SSD6270UG 3922060417 SSB6-4SKL 401330604 .062.-270 .385 .085 .415 .625 1400 1000 .191-.201
1/4SSD8375UGSSD8625UG
SSD8625UGX
3922080617392208101173922081017
SSB8-6SKLSSB8-10SKL
*see pg 4
401330806401330810*see pg 4
.080-.375
.350-.625
.080-.625.525 .127
.560
.810
.810
.9951.2451.434
2500 2000 .261-.272
COUNTERSUNK All Stainless
3/16 SSK6331UG 39220606172 SSC6-6KL 403110606 .125-.331 .345 .070 .486 .762 1300 950 .191-.2011/4 SSK8475UG 39220808172 SSC8-8SKL 403110808 .160-.475 .070 .085 .660 1.059 2500 2000 .261-.272
PRG 540 PROSET® 3400
Byler Part #: 5707540 Byler Part #: 57073400PNEUMATIC PNEUMATIC
#1seller
proset® 3400• Pulls all alloys 3/16”and 1/4”• Innovative high performance features including a patented “Quick Disconnect” nose housing and jaw case• Delivers the highest pulling force in its class with a weight of 4lbs• Tough aluminum casing is designed to enhance the life of the tool.• Lightweight polymer construction & comfort- able two finger, low activation force trigger• No tools required to switch out nose parts
prG540• Pulls all alloys from 3/32” to 1/4”• Extremely strong, robust and reliable heavy duty pneumatic rivet tool • It is unbeatable for efficient riveting on mass-production lines.• Sets all styles and sizes of POP ® blind rivets, ultra-grips, and T-Rivets from 3/32” to 1/4”.
SPARE JAWS
Available in Huck Magna-Lok Page 4
3/16” - 5707540046 1/4” - 5707540044
Tel: 800-325-3147 or 972-986-6792
6
MonobolTs® / inTerloCKs®
TYPE OFRIVET DIA MFG
PART #BYLERPART #
GRIPRANGE A B E L SHEAR TENSILE
LARGE FLANGE HEADAluminum Rivet/
Aluminum Mandrel3/16 BALVA-06-04 39110604133 .062-.250 .500-.530 .105 .842 .416 550 450
PROTRUDING HEADAluminum Rivet/
Aluminum Mandrel
3/16 BAPV-06-04BAPV-E06-07
391106041339110607141
.062-.250
.064-.437 .355-.400 .090 .8421.00
.416
.577 550 450
1/4BAPV-08-06BAPV-08-10
BAPV-E08-10
39110806133911081013
39110810131
.080-.375
.350-.625
.080-.625.480-.530 .117
1.1811.1741.431
.556
.806
.8061270 830
COUNTERSUNK HEADAluminum Rivet/
Aluminum Mandrel
3/16 BACV-06-06*BACV-E06-08
3911060613239110608135
.125-.331
.125-.481 .325 .084 0.7861.032
.486
.732 650 475
1/4 BACV-08-07 39110807132 .125-.475 .395-.448 .093 1.069 .660 1350 950
LARGE FLANGE HEADSteel Rivet/ Steel Mandrel 3/16 SSLV-06-04
SSLV-E06-073912060413339120607131
.062-.250
.064-.437 .500-.530 .105 .8421.00
.416
.577 550 450
PROTRUDING HEAD Steel Rivet/
Steel Mandrel
3/16SSPV-06-04SSPV-06-07
SSPV-E06-07
39120604133912060713
39120607131
.062-.250
.214-.420
.064-.437.355-.400 .090
.842
.8551.00
.416
.537
.5771300 1000
1/4SSPV-08-06SSPV-08-10
SSPV-E08-10
39120806133912081013
39120810131
.080-.375
.350-.625
.080-.625.480-.530 .117
1.1811.1741.430
.556
.806
.8062400 1850
PROTRUDING HEADStainless Steel Rivet
Stainless Steel Mandrel
3/16CCPV-06-04CCPV-06-07
CCPV-E06-07
39220604133922060713
39220607131
.062-.250
.214-.420
.064-.437.355-.400 .090
.842
.8551.00
.416
.537
.5771300 1000
1/4CCPV-08-06CCPV-810
CCPV-E08-10
392208061339220810123922081013
.080-.375
.375-.625
.080-.625.480-.530 .117
1.1811.1741.430
.556
.806
.8062400 1850
HEADSTYLE MaxDia.
MFG.PART #
BYLER PART #
GRIPRANGE
RIVET DIMENSIONS - Min Values in lbs. HOLE SIZE
DRILL #SHEAR TENSILE
B D E Length M
PROTRUDING HEADAluminum Rivet/
Aluminum Mandrel
3/16BAPI-06-04BAPI-06-07BAPI-06-10
BAPI-E06-07
391106041439110607143911061014
39110607141
.062-.250
.214-.437
.376-.625
.062-.437.355-.400 .090 .114-.120
.416
.541
.731
.577
.842
.9671.081.00
.194-.204#11 550 550
1/4BAPI-08-06BAPI-08-10
BAPI-E08-10
391108061439110810143911081015
.080-.376
.350-.625
.080-.625.480-.530 .117 .153-.162
.556
.806
.806
1.181.401.43
.261-.276#G 1270 830
PROTRUDING HEADSteel Rivet/ Steel
Mandrel
3/16SSPI-06-04SSPI-06-07SSPI-06-10
SSPI-E06-07
3912060414391206071439120610143912060715
.062-.250
.214-.437
.376-.625
.062-.437.355-.400 .090 .114-.120
.416
.541
.731
.577
.842
.9671.0801.000
.194-.204#11 1300 1000
1/4SSPI-08-06SSPI-08-10
SSPI-E08-10
391208061439120810143912081015
.080-.376
.350-.625
.080-.625.480-.530 .117 .153-.162
.556
.806
.806
1.1801.4001.430
.261-.276#G 2400 1850
COUNTERSUNK HEAD Steel Rivet /
Steel Mandrel
3/16 SSCI-06-06 3913060614 .125-.331 .345 .070 .122 * .793 .191-.201 1300 1000
1/4 SSCI-08-08 3913080814 .170-.475 .415 .079 .162 * 1.115 .261-.276 2400 1850
inTerloCKs®
Dome/ Protruding Head Large Flange Head Countersunk Head
*Special Order Items. Minimums and lead times may apply. Monobolts® are supplied lubricated and must not be degreased.
A MONOBOLT®
nosepiece is required when installing Monobolts® . Use of the incorrect nosepiece will impair rivet function. The result is usually the mandrel pulling through.
3/16" Part #:540574335
1/4" Part #:540574332
Tel: 800-325-3147 or 972-986-6792
7
MaGna-bUlb®
TYPE OFRIVET DIA. MFG
PART # BYLER PART # GRIPRANGE
DIMENSIONS MIN. VALUES IN LBS. HOLESIZEB C D E SHEAR TENSILE
MAGNA-BULBSteel-Zinc PlatedGold Chromate
Finish
3/16
MBP-R6-M2MBP-R6-M3MBP-R6-M4MBP-R6-M5MBP-R6-M6MBP-R6-M7MBP-R6-M8MBP-R6-M9
MBP-R6-M10
410122106024101221060341012210604410122106054101221060641012210607410122106084101221060941012210610
.075-.110
.087-.150
.126-.189
.165-.228
.205-.268
.244-.307
.283-.347
.323-.386
.362-.425
.385 .101
.592
.672
.695
.734
.774
.813
.853
.892
.931
1.000 1700 1050 .191-.201
1/4
MBP-R8-M2MBP-R8-M3MBP-R8-M4MBP-R8-M5MBP-R8-M6MBP-R8-M7MBP-R8-M8MBP-R8-M9
MBP-R8-M10MBP-R8-M11MBP-R8-M12MBP-R8-M13
410122108024101221080341012210804410122108054101221080641012210807410122108084101221080941012210810410122108114101221081241012210813
.060-.138
.110-.189
.150-.229
.189-.268
.229-.308
.268-.346
.308-.387
.346-.425
.387-.466
.425-.504
.466-.545
.504-.583
.530 .125
.759
.861
.940
.912
.942
.9811.0211.0601.1001.1391.1791.218
1.100 3500 1900 .261-.272
5/16*
MBP-R10-3 MBP-R10-4 MBP-R10-5 MBP-R10-6 MBP-R10-7 MBP-R10-8
410122110034101221100441012211005410122110064101221100741012211008
.150-.250
.200-.300
.250-.350
.300-.400
.350-.450
.400-.500
.655 .152
1.1151.1651.2151.2651.3151.365
1.380 5000 2960 .328-.340
TYPE OFRIVET
MAXDIA.
MFGPART #
BYLERPART #
GRIPRANGE
DIMENSIONSE-max SHEAR TENSILE
SPECIAL CLEARANCE
MAGNA-BULB1/4
MBCP-R8-M2MBCP-R8-M3MBCP-R8-M4MBCP-R8-M5MBCP-R8-M7MBCP-R8-M8MBCP-R8-M9MBCP-R8-M11MBCP-R8-M13
410122108021410122108031410122108041410122108051410122108071410122108081410122108091410122108111410122108131
.060-.138
.110-.189
.150-.229
.189-.268
.268-.346
.308-.387
.346-.425
.425-.504
.504-.583
.580
.627??
.706
.785
.825
.864
.9431.022
3000 1600
special Clearance MaGna-bUlb®
TYPE OFRIVET DIA. MFG
PART # BYLER PART # GRIPRANGE
DIMENSIONS MIN. VALUES IN LBS. HOLESIZEB C F G SHEAR TENSILE
PROTRUDING HEAD
All Steel
3/16 HKLP-R6-5HKLP-R6-7
4042210605140422106071
.062-.312
.187-.437 .348-.388 .101 MAX .9001.025 .183-.190 1900 1000 .191-.201
1/4
HKLP-R8-6HKLP-R8-7
HKLP-R8-10HKLP-R8-12HKLP-R8-14
4042210806140422108071404221081014042210812140422108141
.080-.375
.187-.437
.375-.625
.500-.750
.625-.875
.490-.530 .110-.125
1.0621.1241.3121.4361.562
.251-.260 3500 1900 .261-.272
hUCKloK®
Double locking wide grip fasteners for metals, plastics & composites.
Note:
*5/16 must use a 256 tool and 592993307 pulling head for installation
Tel: 800-325-3147 or 972-986-6792
8
T riveTs and Q riveTs
TYPE OFRIVET
DIA.“D”
MFG.PART #
BYLERPART #
GRIPRANGE
DIMENSIONS MIN STRENGTH (LBS.)
F L HEAD HEIGHT
HEADDIA. “H” SHEAR TENSILE
T-RIVETDOME HEAD
Aluminum/Steel
3/16
AD6140TFBSAD6187TFBSAD6250TFBSAD6312TFBSAD6375TFBSAD6437TFBSAD6519TFBS
0532106140053210618705321062500532106312053210637505321064370532106519
.032-.140
.141-.187
.188-.250
.251-.312
.313-.375
.376-.437
.438-.519
.565
.630
.690
.755
.820
.880
.940
.447
.510
.572
.635
.697
.760
.822
.083-.103 .375-.405
950102510501125120012751350
600
1/4
AD8140TFBSAD8187TFBSAD8250TFBSAD8312TFBSAD8375TFBSAD8437TFBSAD8519TFBSAD8620TFBS
05321081400532108187053210825005321083120832108375083210843708321085190832108620
.032-.140
.141-.187
.188-.250
.251-.312
.313-.375
.376-.437
.438-.519
.520-.620
.625
.710
.775
.840
.900
.9601.0251.094
.500
.552
.615
.677
.740
.802
.865
.937
.106-.126 .485-.535
14251575165017752050215023252400
1110
LARGE FLANGE
Aluminum/Steel
3/16AD6075TFBS LFAD6140TFBS LF
083210607523083210614023
.046-.140
.032-.140. 500.565
.382
.447.083-.103 .543-.583 950 600
1/4 AD8140TFBS LF 083210814023 .032-.140 .625 .500 .106-.126 .720-.780 1425 1110
Q riveTs
LARGE FLANGE HEAD STYLEDOME HEAD BACKSIDE
DOME HEAD LARGE FLANGED HEAD
T riveTs (“PEEL-TYPE”)
HEAD STYLES SIZES PRODUCT
SERIESMATERIALS
(RIVET/STEM)
120ºCOUNTER
SUNK1/8”
AACQ Aluminum/Aluminum
BSCQ Aluminum/Steel
CCCQ Stainless/Stainless
SSCQ Steel/Steel
LARGE FLANGE
5/32”&
3/16”
AALQ Aluminum/Aluminum
BSLQ Aluminum/Steel
CCLQ Stainless/Stainless
SSLQ Steel/Steel
PRO-TRUDING 1/4”
AAPQ Aluminum/Aluminum
BSPQ Aluminum/Steel
CCPQ Stainless/Stainless
SSPQ Steel/Steel
DIAPROTRUDING LARGE FLANGE COUNTERSUNK
A B MAX A B MAX A B MAX
1/8 .250 .040 .375 .065 .226 .0325/32 .312 .050 .469 .075 .281 .0403/16 .375 .060 .625 .092 .344 .0501/4 .500 .080 .750 .107 .468 .071
Q-RIVET - SHEAR & TENSILE STRENGTH
DIAALUM/ALUM ALUM/STEEL STEEL/STEEL MONEL/STEEL ALL STAINLESS
SHEAR TENSILE SHEAR TENSILE SHEAR TENSILE SHEAR TENSILE SHEAR TENSILE
1/8 225 250 350 325 500 400 650 525 700 6005/32 325 325 525 450 700 550 950 900 1050 10003/16 500 450 750 650 1050 825 1450 1100 1650 13001/4 850 750 1250 1050 1750 1450 2350 2150 2450 2250
offers hiGh shear
and sTrenGTh!
• Higher Shear & Tensile
• Locked in mandrel
• Versatile Grip Range
• Flush break when pulled
in mid-grip range
• Complete hole fill
benefits:• High Strength Rivet
• Visible Lock
• High Clamp Up:T-Rivet will draw sheets of material firmly together even when seperated by as much as 3/16”
• StructuralBreakstem Rivet
NOTE:• Dome, countersunk & large flange head styles available
• Multi-grip version available
• Special nose tip required
*Minimums and lead times will apply.Refer to www. bylerrivet.com for grip information
Tel: 800-325-3147 or 972-986-6792
9
KlaMp-TiTes®/KTr’s and MaGna-TiTes®
KlaMp-TiTes®/KTr’s (STRUCTURAL)
TYPE DIA MFG.PART #
BYLERPART #
GRIPRANGE
DIMENSIONS
A B C D E MAX.
SHEAR &
TENSILE
HOLE SIZE
MAGNA-TITEPROTRUDING
HEAD All Aluminum
3/16
406106060501406106060601406106060801406106061001406106061201
MTP-B6-5SMTP-B6-6SMTP-B6-8S
MTP-B6-10SMTP-B6-12S
050-.312100-.375.250-.500.375-.625.500-.750
.199 .453 .117
.890
.9401.0901.2151.340
1.0201.0701.2201.3451.470
630&
450.205-.221
MAGNA-TITESHAVEHEADAll Aluminum
4061050608014061050612011
MTS-B6-8SMTS-B6-12S
.050-.500
.050-.750.199 .453 .117
1.0101.260
1.1401.390
630&
450.205-.221
MAGNA-TITELOW PRO
HEAD All Aluminum
406102060401406102060801406102061200
4061020612001
MTLP-B6-4MTLP-B6-8
MTLP-B6-12MTLP-B6-12X
.050-.250
.187-.500 .375-.750 .050-.750
.199 .453 .052
.8401.0901.2601.260
1.0401.1401.3901.390
630&
450.205-.221
MAGNA-TITECOUNTERSUNK
All Aluminum
40610106080140610106050140610106070140610106101
406101061201
MTV-B6-8SMTV-B6-5SMTV-B6-7S
MTV-B6-10SMTV-B6-12S
.250-.500
.070-.312
.160-.410
.375-.625
.500-.750
.199 .355 .940
.9101.0101.0901.2151.340
1.0401.1401.2201.3451.470
630&
450.205-.221
MaGna-TiTes®
Magna-Tite® Protruding Head
Magna-Tite® Shavehead
Magna-Tite® Low Pro Head
Magna-Tite® Countersunk Head
TYPE DIA. MFG.PART #
BYLERPART #
GRIPRANGE
DIMENSIONS
B D L M SHEAR TENSILE HOLE SIZE
KLAMP-TITESAll Aluminum
3/16
BAPKTR-06-04BAPKTR-06-06BAPKTR-06-09BAPKTR-06-12
051100604051100606051100609051100612
.050-.250
.187-.375
.375-.562
.562-.750
.445 .088
.890
.9851.1201.300
1.041.131.251.44
700 450 .204-.209
1/4BAPKTR-08-04BAPKTR-08-06
051100804051100806
.060-.250
.187-.375.560 .113
.9251.050
1.301.42
1250 700 .252-.262
1. 2. 3.
benefits• Large Bearing Area
The KTR provides an exceptionally large blind side bearing area, critical when fastening thin sheets, brittle materials or oversized holes.
• Wide Grip Range• Mechanically locks
insTallaTion ToolinGproset® 3400• Pulls all alloys 3/16”and 1/4”• Innovative high performance features including a patented “Quick Disconnect” nose housing and jaw case• Delivers the highest pulling force in its class with a weight of 4lbs• Tough aluminum casing is designed to enhance the life of the tool.• Lightweight polymer construction & comforable two finger, low activation force trigger• No tools required to switch out parts
prG540• Pulls all alloys from 3/32” to 1/4”• Extremely strong, robust and reliable heavy duty pneumatic rivet tool • It is unbeatable for efficient riveting on mass-production lines.• Sets all styles and sizes of POP ® blind rivets, ultra-grips, and T-Rivets from 3/32” to 1/4”.
PRG540
Byler Part #: 5707540PNEUMATIC
KTR sleeve upsets in three segments, producing a powerful material clamping action
PROSET® 3400
Byler Part #: 57073400PNEUMATIC
*S = Seal
#1seller
*Also available with neoprene washer Special nose piece required = 1/4 KTR = #540574351, 3/16 KTR = #540574353
Tel: 800-325-3147 or 972-986-6792
10
MUlTi-Grips®
TYPE DIA. MFG.PART #
BYLERPART #
GRIPRANGE
RIVET DIMENSIONS MIN VALUES (LBS)
BHD DIA.
DMAX HH
M LENGTH
E MAX. SHEAR TENSILE HOLE &
DRILL SIZE
DOME/LOW PROFILE
HEADAll Aluminum
1/8AD 41-43 ABSAD 43-45 ABSAD 43-47 ABS
091104143109110434510911043471
.039-.187
.157-.312
.251-.437.238-.262 .032-.040
.433
.573
.714-- 65 85
.129-.142#30
3/16
AD 62-64 ABSAD63-66 ABSAD 66-68 ABSAD68-612 ABS
091106264109110636610911066681
09110686121
.063-.250
.188-.375
.251-.500
.438-.750
.360-.390 .047-.055
.585
.765
.8761.21
-- 145 205.192-.205
#10
LARGE FLANGEHEAD
All Aluminum
1/8 AD 41-43 ABS LF 0911041433 .039-.187 .360-.390 .036-.052 .433 -- 65 85. 129-.142
#30
3/16AD 62-64 ABS LFAD 63-66 ABS LF
AD 68-612 ABS LF
091106264309110636630911086123
.063-.250
.188-.375
.438-.750.600-.650 .067-.083
.585
.7651.21
-- 145 205.192-.205
#10
DOME/LOW PROFILE
HEADAluminum/Steel
1/81661-004101661-004141661-00416
091691041009169104140916910416
.031-.187
.157-.312
.219-.375.262 .051
.410
.530
.630 .070 165 230
.132-.138#30
5/321661-005121661-005161661-00521
091691051209169105140916910516
.047-.250
.157-.375
.250-.500.321 .061
.490
.640
.770.084 255 375
.157-.160#20
3/16
1661-006131661-006191661-006211661-00631
GSMD612-615APG
0916910613091691061909169106210916910631
09169106413
.062-.250
.187-.437
.250-.500
.500-.750
.630-.945
.396 .071
.550
.730
.7801.09
.112 295 525.188-.191
#10
1/4GSMD82-86APGGSMD84-89APGGSMD86-91APG
091691081309169108210316910831
.059-.354
.236-.551
.394-.709.453-.512 .087
.630
.8271.024
-- 629 899.256-.275
“F”
LARGE FLANGE HEAD
Aluminum/Steel
1/81692-004101692-00414
0916910821*0916920414
. 031-.187.125-.312
.325 .045.410.530
.074 165 230.132-.138
#30
5/32 1692-00514 0916920514 .125-.312 .375 .058 .540 .090 255 375.161-.166
#20
3/161692-006131692-006211692-00631
091692061309169206210916920631
.062-.250
.250-.500
.500-.781.625 .075
.550
.7801.09
.112 350 530.194-.201
#10
BRAZIER HEADAluminum/Steel 3/16
1610-037161610-03722
09161037160916103722
.187-.437
.062-.250.472 .098
.550
.730.112 340 505
.188-.191#10
*Minimums may apply
DOME/LOW PROFILE HEAD LARGE FLANGE HEAD COUNTERSUNK HEAD BRAZIER HEAD
Low Profile Head Large Flange Head Countersunk Head Brazier Head
• Wide Grip Range• Complete hole fill
• Mechanically Locked Stem• Large blind side footprint Great for blind applications!benefits:
Tel: 800-325-3147 or 972-986-6792
11
• Wide Grip Range• Complete hole fill
• Mechanically Locked Stem• Large blind side footprint Great for blind applications!benefits:
(ALL STEEL) sTaveX®
TYPE DIA MFG.PART #
BYLERPART #
GRIPRANGE
DIMENSIONS MIN VALUES (LBS)
BNOM.
DMAX HH
MLENGTH
E MAX. SHEAR TENSILE
HOLE & DRILL SIZE
DOME/LOW PRO
HEADAll Steel
1/8 0BS01-00414 0922010414 .039-.236 .287 .037 .570 .087 202 263 .129-.134 #30
5/32 0BS01-00516 0922010516 .079-.315 .322 .052 .630 .112 344 405 .161-.166 #20
3/16
0BS01-006120BS01-006140BS01-006180BS01-00622
0922010612092201061409220106180922010622
.060-2.00
.060-.250
.060-.354
.250-.500
.397 .061
.480
.540
.670
.790
.120 585 647.192-.196
#10
1/4 01610-04844 0922044844 .060-.300 .530 .105 .660 .158 700 800 .261-.275 F
LARGE FLANGE
HEADAll Steel
3/160BE34-006140BE34-006180BE34-00622
092234061409223406180922340622
.060-.250
.060-.354
.250-.500.637 .081
.540
.670
.790.118 585 647
.192-.196#10
120ºCOUNTER
SUNKHEAD
All Steel
1/8 0BS04-00414 0922040414 .039-.236 .232 .039 .550 .084 202 263 .129-.134 #30
3/16
0BS04-006140BS04-C06140BS04-006180BS04-00622
092040614092040614092040618092040622
.093-.250
.165-.250
.093-.375
.250-.500
.351 .055.540.670.790
.118 450 650.192-.196
#10
MUlTi-Grips®
TYPE DIA. MFG.PART #
BYLERPART #
GRIPRANGE
RIVET DIMENSIONS MIN VALUES (LBS)
BNOM. D M
LENGTH E MAX. SHEAR TENSILEHOLE &
DRILL SIZE
DOME/LOW PROFILE HEAD
Aluminum/Stainless3/16
1663-006131663-006191663-006211663-006311663-00641
09166306130916630619091663062109166306310916630641
.062-.250
.187-.437
.256-.512
.433-.768
.630-.945
.375 .058 .590 .090 350 530.157-.160
#20
LARGE FLANGE HEAD
Aluminum/Stainless3/16
1692-006131692-006211692-00631
091692061309169206210916920631
.062-.250
.250-.500
.500-.768.625 .075
.550
.7801.09
.112 350 530.188-.191
#10
COUNTERSUNK HEAD
Aluminum/Stainless
1/801682-0041201682-0041401682-00416
091682041209168204140916820416
.093-2.50
.155-.312
.217-.375.207 .050
.470
.530
.600.074 155 205
.132-.138#30
5/3201682-0051401682-00516
09168205140916820516
.109-.312
.171-.375.247 .052
.550
.610.090 255 300
.161-.166#20
3/1601682-0061501682-00621
09168206150916820621
.125-.312
.250-.500.347 .069
.610
.800.112 350 530
.194-.201#10
DOME/LOW PROFILE HEAD
All Stainless
1/8GSMD41-43SSPGGSMD42-44SSPGGSMD43-45SSPG
093414309342440934345
.020-.192
.059-.265
.188-.315.228-.256 .051
.346
.406
.465.122-.129 326 517
.128-.133#30
5/32GSSMD51-54SSPGGSSMD53-55SSPGGSSMD55-57SSPG
093515409353550935557
.020-.256
.139-.354
.276-.472.335-.374 .051
.433
.551
.709.151-.160 596 820
.161-.166#20
3/160BE61-006110BE61-006140BE61-00618
.059-.138
.138-.236
.236-.335.378 .059
.510
.610
.730.126 877 1124 .193-.201
Tel: 800-325-3147 or 972-986-6792
12
peel and Tri-fold riveTs
TYPE DIA. MFG.PART #
BYLERPART #
GRIPRANGE
RIVET DIMENSIONS MIN STRENGTH
A B MAX. D L MAX. SHEAR TENSILE
PEEL RIVETDOME HEAD
Aluminum/Steel
1/8
GSMD42ADPGSMD43ADPGSMD44ADPGSMD46ADPGSMD47ADP
051204021051204031051204041051204061051204071
.039-.138
.098-.197
.177-.276
.256-.354
.335-.433
.228-.256 .048 .122-.138
.354
.433
.512
.590
.669
180 213
5/32
GSMD52ADPGSMD53ADPGSMD54ADPGSMD55ADPGSMD56ADPGSMD58ADP
GSMD510ADP
051205021051205031051205041051205051051205061051205081051205101
.039-.118
.098-.197
.177-.256
.236-.315
.295-.394
.354-.422
.452-.511
.275-.315 .059 .151-.169
.354
.433
.512
.590
.669
.748
.827
315 450
3/16
GSDM62ADPGSMD63ADPGSMD64ADPGSMD65ADPGSMD66ADPGSMD68ADP
GSMD610ADPGSMD612ADP
051206021051206031051206041051206051051206061051206081051206101051206121
.039-.118
.098-.197
.177-.276
.356-.354
.335-.394
.375-.472
.453-.551
.531-.748
.335-.374 .063 .183-.201
.354
.433
.512
.590
.669
.748
.8271.024
450 607
peel riveTs
Tri-folds
TYPE DIA MFG.PART #
BYLERPART #
GRIPRANGE
DIMENSIONS MIN STRENGTH HOLE & DRILL A B D L MAX. F MAX. SHEAR TENSILE
DOME HEADTRI-FOLDAluminum
5/32
145010502145010504145010506145010508
GAMD52ATFGAMD54ATFGAMD56ATFGAMD58ATF
.040-.118
.040-.250
.040-.375
.125-.500
.154-.161#20
.302-.322 .060 .154-.161
.590
.790
.852
.977
.680
.880
.9421.067
200 225
3/16
145010604145010606145010608145010610145010612
GAMD64ATFGAMD66ATFGAMD68ATF
GAMD610ATFGAMD612ATF
.062-.250
.187-.375
.312-.500
.437-.625
.563-.750
.209-.221#4 .375-.395 .080 .195-.205
.770
.8951.0201.1451.270
.8881.0131.1381.2631.388
350 450
DOME HEAD Black Anodized
Aluminum3/16
14501060421450106062
GAMD64ATFBLKGAMD66ATFBLK
.062-.250
.187-.375.209-.221
#4 .375-.395 .080 .195-.205.770.895
.8881.013
eXTra-lenGTh
MeTriC riveTs
also available
Byler Rivet offers metric blind rivets in 3mm through 6mm diameters.
Material choices: • Aluminum/Steel • Steel/Steel• 304 & 316 Alloy Stainless Steel.
Tri-Fold Rivets are an economical, specialty fastener with a locked mandrel core and three folded legs on the blind side.
Peel Rivets provide a large blind side bearing head for support in soft, brittle or ductile materials.
*Min. strength in lbs.
Tel: 800-325-3147 or 972-986-6792
13
• Aluminum • Copper• Steel • Monel• Stainless
pop® riveTs
Actual Size Rivet Chart
Painted Rivets Available
*Minimums may apply
Back-Up Washers
Aluminum Round: Steel Round:1/8 1001104 1/8 10022045/32 1001105 5/32 10022053/16 1001106 3/16 1002206
Tel: 800-325-3147 or 972-986-6792
14
pop® riveTs all aluminum
HEAD STYLEALLOY DIA MFG
PART #BYLER PART #
GRIPRANGE
DIMENSIONS MIN STRENGTH LBS. HOLE SIZEL MAX H E +\- .004 SHEAR TENSILE DRILL NO.
COUNTERSUNK Aluminum Rivet/
Aluminum Mandrel
1/8AK42ABSAK43ABSAK44ABSAK45ABS
101104022101104032101104042101104052
.063-.125
.126-.187
.188-.250
.251-.312
.275
.337
.400
.462.207-.233 .031 155 235 .129-.133
#30
5/32 AK54ABSAK56ABS
101105042101105062
.188-.250
.313-.375.425.550 .268-.294 .040 225 350 .160-.164
#203/16 AK64ABS 101106042 .126-.250 .450 .335-.361 .050 315 500 .192-.196
DOME HEADAluminum Rivet/
Aluminum Mandrel
3/32AD32ABSAD34ABSAD36ABS
101103021101103041101103061
.020-.125
.126-.250
.251-.375
.250
.375
.500.178-.198 .032 85 135 .097-.100
#41
1/8
AD41ABSAD42ABSAD43ABSAD44ABSAD45ABSAD46ABSAD48ABS
AD410ABS
101104011101104021101104031101104041101104051101104061101104081101104101
.020-.062
.063-.125
.126-.187
.188-.250
.251-.312
.313*.375
.376-.500
.501-.625
.212
.275
.337
.400
.462
.525
.650
.775
.238-.262 .040 155 235 .129-.133#30
5/32
AD53ABSAD54ABSAD56ABSAD58ABS
AD510ABS
101105031101105041101105061101105081101105101
.126-.187
.188-.250
.251-.375
.376-.500
.501-.625
.362
.425
.550
.675
.800
.296-.328 .050 225 350 .160-.164#20
3/16
AD62ABSAD64ABSAD66ABSAD68ABS
AD610ABSAD612ABSAD614ABSAD616ABS
101106021101106041101106061101106081101106101101106121101106141101106161
.020-.125
.126-.250
.251-.375
.376-.500
.501-.625
.626-.750
.751-.875
.876-1.00
.325
.450
.575
.700
.825
.9501.0751.200
.356-.394 .060 315 500 .192-.196#11
1/4
AD84ABSAD86ABSAD88ABS
AD810ABSAD812ABSAD814ABSAD816ABS
101108041101108061101108081101108101101108121101108141101108161
.125-.250
.251-.375
.376-.500
.501-.625
.626-.750
.751-.875
.876-1.00
.500
.625
.750
.8751.00
1.1251.250
.475-.525 .080 600 750 .257-.261F”
LARGE FLANGE Aluminum Rivet/
Aluminum Mandrel
1/8AD42ABSLFAD44ABSLFAD46ABSLF
101104023101104043101104063
.020-.125
.126-.250
.251-.375
.275
.400
.525.360-.390 .032~
.065` 155 235 .129-.133#30
5/32 AD54ABSLFAD56ABSLF
101105043101105063
.188-.250
.251-.375.379.504 .448-.488 .039~
.075~ 225 350 .160-.164#20
3/16
AD64ABSLFAD66ABSLFAD68ABSLF
AD610ABSLFAD612ABSLFAD616ABSLFAD618ABSLF
101106043101106063101106083101106103101106123101106163101106183
.126-.250
.251-.375
.376-.500
.501-.625
.626-.750
.876-1.001.00-1.125
.450
.575
.700
.825
.9501.2001.277
.600-.650 .047~.075~ 315
500.192-.196
#11
1/4 AD86ABSLFAD88ABSLF
101108063101108083
.251-.375
.376-.500.635.760 .740-.750 .069~
.107~ 600 750 .257-.261F”
*Minimums and lead times may apply.~ Head heights differ among manufacturers.
Dome Head Large Flange Head 120º Countersunk Headmust only be used with
aluminum 3/16 POP rivets
Aluminum Umbrella Plugs:
For 3/16 Dia. Rivets
MPA-6 &
MPA-61
Tel: 800-325-3147 or 972-986-6792
15
pop® riveTs aluminum/steel
Dome Head Large Flange Head 120º Countersunk Head
HEAD STYLEALLOY DIA MFG
PART #BYLER PART #
GRIPRANGE
DIMENSIONS MIN STRENGTH LBS. HOLE SIZEDRILL NO.L H E + .010 SHEAR TENSILE
COUNTERSUNKAluminum Rivet/Steel Mandrel
1/8AK42BSAK43BSAK44BSAK45BS
101204022101204032101204042101204052
.063-.125
.126-.187
.188-.250
.251-.312
.275
.337
.400
.462.207-.233 .031 170 220 .129-.133
#30
5/32AK54BSAK56BSAK58BS
101205042101205062101205082
.188-.250
.251-.375
.376-.500
.425
.550
.675.268-.294 .040 260 350 .160-.164
#20
3/16AK64BSAK66BSAK68BS
101206042101206062101206082
.126-.250
.251-.375
.376-.500
.450
.575
.700.335-.361 .050 380 500 .192-.196
#11
DOME HEADAluminum Rivet/Steel Mandrel
3/32 AD32BSAD34BS
101203021101203041
.020-.125
.126-.250.250.375 .178-.198 .032 90 120 .097-.100
1/8
AD41BSAD42BSAD43BSAD44BSAD45BSAD46BSAD48BS
AD410BS
101204011101204021101204031101204041101204051101204061101204081101204101
.020-.062
.063-.125
.126-.187
.188-.250
.251-.312
.313*.375
.376-.500
.501-.625
.212
.275
.337
.400
.462
.525
.650
.736
.238-.262 .040 170 220 .129-.133#30
5/32
AD52BSAD53BSAD54BSAD56BSAD58BS
AD510BS
101205021101205031101205041101205061101205081101205101
.063-.125
.126-.187
.188-.250
.251-.375
.376-.500
.501-.625
.300
.362
.425
.550
.675
.800
.296-.328 .050 260 350 .160-.164#20
3/16
AD62BSAD64BSAD66BSAD68BS
AD610BSAD612BSAD614BSAD616BS
101206021101206041101206061101206081101206101101206121101206141101206161
.020-.125
.126-.250
.251-.375
.376-.500
.501-.625
.626-.750
.751-.875
.876-1.00
.325
.450
.575
.700
.825
.9501.0751.200
.356-.394 .060 380 500 .192-.196#11
1/4
AD84BSAD86BSAD88BS
AD810BSAD812BSAD814BSAD816BS
101208041101208061101208081101208101101208121101208141101208161
.125-.250
.251-.375
.376-.500
.501-.625
.626-.750
.751-.875
.876-1.00
.500
.625
.750
.8751.00
1.1251.250
.475-.525 .080 700 920 .257-.261“F”
LARGE FLANGEAluminum Rivet/Steel Mandrel
1/8AD42BSLFAD44BSLFAD46BSLF
101204023101204043101204063
.020-.125
.126-.250
.251-.375
.275
.400
.525.360-.390 .032
.065~ 170 220 .129-.133#30
5/32 AD54BSLFAD56BSLF
101205043101205063
.188-.250
.251-.375.379.504 .448-.488 .039~
.075~.160-.164
#20
3/16
AD64BLFAD66BSLFAD68BSLF
AD610BSLFAD612BSLFAD616BSLFAD618BSLF
101206043101206063101206083101206103101206123101206163101206183
.020-.250
.251-.375
.376-.500
.501-.625
.626-.750.751-1.0001.00-1.125
.450
.575
.700
.825
.9501.2001.277
.600-.650 .047~ 380 500 .192-.196
1/4 AD86BSLFAD88BSLF
101208063101208083
.251-.375
.376-.500.635.760 .740-.750 .069~
.107~ 700 920 .257-.261F”
*Minimums and lead times may apply.~ Head heights differ among manufacturers.
Tel: 800-325-3147 or 972-986-6792
16
pop riveTs® all steel
Dome Head Large Flange Head 120º Countersunk Head
HEAD STYLEALLOY DIA MFG
PART #BYLERPART #
GRIPRANGE
DIMENSIONS MIN STRENGTH LBS. HOLE SIZEDRILL NO.L MAX H E + .01 SHEAR TENSILE
COUNTERSUNK Steel Rivet/
Steel Mandrel
3/32 SK32BSSK34BS
102203022102203042
.032-.125
.126-.187.275.337 .178-.198 .032 130 170 .097-.100
1/8SK42BSSK43BSSK44BSSK45BS
102204022102204032102204042102204052
.063-.125
.126-.187
.188-.250
.251-.312
.275
.337
.400
.462.207-.233 .031 260 310 .129-.133
#30
5/32 SK54BSSK56BS
102205042102205062
.188-.250
.251-.375.425.550 .268-.294 .040 370 470 .160-.164
#20
3/16 SK63BSSK64BS
102206032102206042
.126-.187
.151-.250.355.450 .335-.361 .050 540 680 .192-.196
DOME HEADSteel Rivet/
Steel Mandrel
3/32SD32BSSD34BSSD36BS
102203021102203041102203061
.020-.125
.126-.250
.251-.375
.250
.375
.500.178-.198 .032 130 170 .097-.100
#41
1/8
SD41BSSD42BSSD43BSSD44BSSD45BSSD46BSSD48BS
SD410BS
102204011102204021102204031102204041102204051102204061102204081102204101
.020-.062
.063-.125
.126-.187
.188-.250
.251-.312
.313*.375
.376-.500
.501-.625
.212
.275
.337
.400
.462
.525
.650
.775
.238-.262 .040 260 310 .129-.133#30
5/32
SD52BSSD53BSSD54BSSD56BS
SD510BS
102205021102205031102205041102205061102205101
.126-.187
.188-.250
.251-.375
.376-.500
.501-.625
.362
.425
.550
.675
.800
.296-.328 .050 370 470 .160-.164#20
3/16
SD62BSSD64BSSD66BSSD68BS
SD610BSSD612BSSD614BSSD616BS
102206021102206041102206061102206081102206101102206121102206141102206161
.020-.125
.126-.250
.251-.375
.376-.500
.501-.625
.626-.750
.751-.875
.876-1.00
.325
.450
.575
.700
.825
.9501.0751.200
.356-.394 .060 540 680 .192-.196#11
1/4
SD84BSSD86BSSD88BS
SD810BSSD812BSSD814BSSD816BS
102208041102208061102208081102208101102208121102208141102208161
.125-.250
.251-.375
.376-.500
.501-.625
.626-.750
.751-.875
.876-1.00
.500
.625
.750
.8751.00
1.1251.250
.475-.525 .080 1000 1240 .257-.261F”
LARGE FLANGE Steel Rivet/
Steel Mandrel
1/8SD42BSLFSD44BSLFSD46BSLF
102204023102204043102204063
.020-.125
.126-.250
.251-.375
.275
.400
.525.360-.390 .032~
.065~ 260 310 .129-.133#30
5/32 SD54BSLFSD56BSLF
102205043102205063
.188-.250
.251-.375.379.504 .448-.488 .039~
.075~ 370 470 .160-.164#20
3/16
SD64BSLFSD66BSLFSD68BSLF
SD610BSLFSD612BSLFSD616BSLF
102206043102206063102206083102206103102206123102206163
.126-.250
.251-.375
.376-.500
.501-.625
.626-.750
.876-1.00
.450
.575
.700
.825
.9501.200
.600-.650 .047~.075~ 540 680 .192-.196
#11
1/4SD86BSLFSD88BSLF
SD812BSLF
102208063102208083102208123
.251-.375
.376-.500
.500-.750
.635
.760-
.740-.750 .069~.107~ 1000 1240 .257-.261
F”
*Minimums and lead times may apply.~ Head heights differ among manufacturers.
Tel: 800-325-3147 or 972-986-6792
17
HEAD STYLEALLOY DIA MFG
PART #BYLERPART #
GRIPRANGE
DIMENSIONS MIN STRENGTH LBS. HOLE SIZEDRILL NO.L MAX H E + .01 SHEAR TENSILE
COUNTERSUNK Steel Rivet/
Steel Mandrel
3/32 SK32BSSK34BS
102203022102203042
.032-.125
.126-.187.275.337 .178-.198 .032 130 170 .097-.100
1/8SK42BSSK43BSSK44BSSK45BS
102204022102204032102204042102204052
.063-.125
.126-.187
.188-.250
.251-.312
.275
.337
.400
.462.207-.233 .031 260 310 .129-.133
#30
5/32 SK54BSSK56BS
102205042102205062
.188-.250
.251-.375.425.550 .268-.294 .040 370 470 .160-.164
#20
3/16 SK63BSSK64BS
102206032102206042
.126-.187
.151-.250.355.450 .335-.361 .050 540 680 .192-.196
DOME HEADSteel Rivet/
Steel Mandrel
3/32SD32BSSD34BSSD36BS
102203021102203041102203061
.020-.125
.126-.250
.251-.375
.250
.375
.500.178-.198 .032 130 170 .097-.100
#41
1/8
SD41BSSD42BSSD43BSSD44BSSD45BSSD46BSSD48BS
SD410BS
102204011102204021102204031102204041102204051102204061102204081102204101
.020-.062
.063-.125
.126-.187
.188-.250
.251-.312
.313*.375
.376-.500
.501-.625
.212
.275
.337
.400
.462
.525
.650
.775
.238-.262 .040 260 310 .129-.133#30
5/32
SD52BSSD53BSSD54BSSD56BS
SD510BS
102205021102205031102205041102205061102205101
.126-.187
.188-.250
.251-.375
.376-.500
.501-.625
.362
.425
.550
.675
.800
.296-.328 .050 370 470 .160-.164#20
3/16
SD62BSSD64BSSD66BSSD68BS
SD610BSSD612BSSD614BSSD616BS
102206021102206041102206061102206081102206101102206121102206141102206161
.020-.125
.126-.250
.251-.375
.376-.500
.501-.625
.626-.750
.751-.875
.876-1.00
.325
.450
.575
.700
.825
.9501.0751.200
.356-.394 .060 540 680 .192-.196#11
1/4
SD84BSSD86BSSD88BS
SD810BSSD812BSSD814BSSD816BS
102208041102208061102208081102208101102208121102208141102208161
.125-.250
.251-.375
.376-.500
.501-.625
.626-.750
.751-.875
.876-1.00
.500
.625
.750
.8751.00
1.1251.250
.475-.525 .080 1000 1240 .257-.261F”
LARGE FLANGE Steel Rivet/
Steel Mandrel
1/8SD42BSLFSD44BSLFSD46BSLF
102204023102204043102204063
.020-.125
.126-.250
.251-.375
.275
.400
.525.360-.390 .032~
.065~ 260 310 .129-.133#30
5/32 SD54BSLFSD56BSLF
102205043102205063
.188-.250
.251-.375.379.504 .448-.488 .039~
.075~ 370 470 .160-.164#20
3/16
SD64BSLFSD66BSLFSD68BSLF
SD610BSLFSD612BSLFSD616BSLF
102206043102206063102206083102206103102206123102206163
.126-.250
.251-.375
.376-.500
.501-.625
.626-.750
.876-1.00
.450
.575
.700
.825
.9501.200
.600-.650 .047~.075~ 540 680 .192-.196
#11
1/4SD86BSLFSD88BSLF
SD812BSLF
102208063102208083102208123
.251-.375
.376-.500
.500-.750
.635
.760-
.740-.750 .069~.107~ 1000 1240 .257-.261
F”
pop® riveTs stainless
Dome Head Large Flange Head 120º Countersunk Head
HEAD STYLEALLOY DIA MFG
PART #BYLER PART #
GRIPRANGE
DIMENSIONS MIN STRENGTH LBS. HOLE SIZEDRILL NOL MAX H E + .01 SHEAR TENSILE
COUNTERSUNK Stainless Rivet/Steel Mandrel
1/8SSC4-2SSC4-3SSC4-4SSC4-5
103204022103204032103204042103204052
.063-.125
.126-.187
.188-.250
.251-.312
.275
.337
.400
.462.207-.233 0.031 520 600 .129-.133
#30
5/16 SSC6-4 103206042 .151-.250 .450 .355-.361 0.05 1150 1300 .192-.196
DOME HEADStainless Rivet/Steel Mandrel
3/32 SSD32BSSSD34BS
103203021103203041
.032-.125
.126-.250.217.375 0.188 0.032 260 335 .097-.100
#41
1/8
SSD41BSSSD42BSSSD43BSSSD44BSSSD46BSSSD48BS
103204011103204021103204031103204041103204061103204081
.020-.062
.063-.125
.126-.187
.188-.250
.313-.375
.376-.500
.212
.275
.337
.400
.481
.628
0.25 .032-.045 520 600 .129-.133#30
5/32SSD52BSSSD53BSSSD54BSSSD56BS
103205021103205031103205041103205061
.063-.125
.126-.187
.188-.250
.251-.375
.300
.362
.425
.5500.312 0.039 785 1040 .160-.164
#20
3/16
SSD62BSSSD64BSSSD66BSSSD68BS
SSD610BS
103206021103206041103206061103206081103206101
.063-.125
.126-.250
.251-.375
.376-.500
.501-.625
.325
.450
.575
.700
.825
0.375 0.047 1000 1300 .192-.196#11
LARGE FLANGE Stainless Rivet/Steel Mandrel
1/8SSD42SSBSSSD43SSBSSSD44SSBS
103204023103204033103204043
.063-.125
.126-.187
.188-.250
.265
.328
.3900.375 0.065 550 770 .129-.133
#30
3/16
SSD64SSBSSSD66SSBSSSD68SSBS
SSD610SSBSSSD612SSBS
103206043103206063103206083103206103103206123
.126-.250
.251-.375
.376-.500
.501-.625
.626-.750
.450
.575
.700
.825
.950
0.625 0.047 1000 1300 .192-.196#11
COUNTERSUNKStainless Rivet/
Stainless Mandrel
1/8 SS/SS44C 103304042 .188-.250 .390 0.25 0.045 520 600 .129-.1333/16 SS/SS64C 103306042 .192-.196 .450 0.375 0.047 1150 1300 .192-.196
#11
DOME HEADStainless Rivet/
Stainless Mandrel
3/32 SSD32SSBSSSD34SSBS
103303021103303041
.032-.125
.126-.250.217.375 0.188 0.032 260 335 .097-.100
#41
1/8
SSD41SSBSSSD42SSBSSSD43SSBSSSD44SSBSSSD46SSBSSSD48SSBS
103304011103304021103304031103304041103304061103304081
.020-.062
.063-.125
.126-.187
.188-.250
.313-.375
.376-.500
.212
.275
.337
.400
.481
.628
0.25 0.032 520 600 .129-.133#30
5/32SSD52SSBSSSD53SSBSSSD54SSBSSSD56SSBS
103305021103305031103305041103305061
.063-.125
.126-.187
.188-.250
.251-.375
.300
.362
.425
.5500.312 0.039 785 1040 .160-.164
#20
3/16
SSD62SSBSSSD64SSBSSSD66SSBSSSD68SSBS
SSD610SSBS
103306021103306041103306061103306081103306101
.063-.125
.126-.250
.251-.375
.376-.500
.501-.625
.325
.450
.575
.700
.825
0.375 0.047 1150 1300 .192-.196#11
1/4 SSD84SSBS 103308041 .125-.250 .500 .475-.525 0.08 1700 2100 .257-.261
LARGE FLANGE Stainless Rivet/
Stainless Mandrel3/16
SSBL6-4SSSBL6-6S
SSBL6-10SSSBL-612S
103306043103306063103306103103306123
.126-.250
.251-.375
.501-.625
.626-.750
.450
.575
.825
.950.600-.650 .047-.750 1150 1300 .192-.196
#11
DOME HEADCopper Rivet Steel/Mandrel 1/8 CD42BS
CD44BS104204021104204041
.063-.125
.188-.250.275.400 0.25 0.04 215 300 .129-.133
#.30DOME HEAD
Copper Rivet/ Brass Mandrel 1/8 CD42BSCD44BS
104504021104504041
.063-.125
.188-.250.275.400 0.25 0.04 215 300 .129-.133
#.30*Minimums and lead times may apply.~ Head heights differ among manufacturers.
Tel: 800-325-3147 or 972-986-6792
18
Closed-end
Dome Head 120º Countersunk Head
TYPE OFRIVET DIA MFG
PART #BYLER PART #
GRIPRANGE
DIMENSIONS MIN STRENGTH LBS. HOLE SIZEDRILL #L max H E SHEAR TENSILE
DOME HEADAluminum Rivet/
Aluminum Mandrel
1/8AD42AHAD43AHAD44AH
061104021406110403140611040414
.063-.125
.126-.187
.188-.250
.316
.377
.440.236 .051 105 150 .129-.133
#30
5/32 AD54AH 0611050414 .063-.125 .455 .312 .066 155 240 .160-.164#20
3/16AD62AHAD64AHAD66AHAD68AH
0611060214061106041406110606140611060814
.063-.125
.126-.250
.251-.375
.376-.500
.345
.470
.595
.720.375 .081 220 310 .192-.196
#11
DOME HEADAluminum Rivet/ Steel Mandrel
1/8
AD41HAD42HAD43HAD44HAD45HAD46HAD48H
0612040114061204021406120403140612040414061204051406120406140612040814
.032-.062
.063-.125
.126-.187
.188-.250
.251-.312
.313*.375
.376-.500
.255
.316
.377
.440
.502
.565
.690
.236
.260 .051 305 385 .129-.133#30
5/32AD52HAD53HAD54H
061205021406120503140612050514
.063-.125
.126-.187
.188-.312
.330
.392
.517.312 .066 430 605 .160-.164
#20
3/16AD62HAD64HAD66HAD68H
0612060214061206041406120606140612060814
.063-.125
.126-.250
.251-.375
.376-.500
.345
.470
.595
.720.375 .081 575 84 .192-.196
#11
1/4 AD84HAD86H
06120804140612080614
.126-.250
.251-.375.505.630 .500 .099 900 1100 .257-.261
F”DOME HEAD
Aluminum Rivet/Stainless Steel Mandrel
3/16 AD64SSHAD66SSH
06130604140613060614
.126-.250
.250-.375.470.595 .375 .081 575 840 .192-.196
#11
120°COUNTERSUNK HEAD
Aluminum Rivet/Steel Mandrel
1/8
AK41HAK42HAK43HAK44HAK45H
06120401240612040224061204032406120404240612040524
.031-.062
.063-.125
.126-.187
.188-.250
.251-.312
.297
.361
.422
.486
.548
.233 .050 305 385 .129-.133#30
5/32 AK53H 0612050324 .126-.250 .452 .312 .065 430 605 .160-.164#20
3/16 AK64HAK66H
06120604240612060624
.126-.250
.251-.375.540.665 .375 .075 575 840 .192-.196
#11
DOME HEADStainless Steel Rivet/
Stainless Steel Mandrel
1/8
SSD41SSHSSD42SSHSSD43SSHSSD44SSHSSD45SSH
06330401140633040214063304031406330404140633040514
.000-.063
.063-.125
.125-.188
.188-.250
.250-.309
.258
.313
.379
.441
.504
.262 .039 472 499 .129-.133#30
5/32SSD52SSHSSD53SSHSSD54SSHSSD55SSH
0633050214063305031406330504140633050514
.000-.125
.125-.188
.188-.250
.250-.309
.338
.394
.461
.523.338 .042 742 899 .160-.164 #20
3/16SSD62SSHSSD64SSHSSD66SSHSSD68SSH
0633060214063306041406330606140633060814
.032-.125
.126-.250
.250-.371
.371-.496
.359
.488
.605
.723.393 .049 966 990 .192-.196 #11
1/4 SSD84SSHSSD86SSH
06330804140633080614
0.00-.250.371-.496
.555
.801 .525 .099 1528 1955 .257-.261 F
***Minimums may apply***+ Values shown are a guide only and may vary depending on the application
This rivet type should be selected wherever a vapor or liquid-tight fastener is required! They provide 100% mandrel retention! They also have 23% more tensile strength and up to 45% more shear strength than equivalent open-end types.
Tel: 800-325-3147 or 972-986-6792
19
speed fasTeninGHigh volume Speed Fastening can increase productivity and decrease
unit labor costs up to four times a traditional screw or pull rivet!Speed Fastening is a unique assembly system designed for rapid & reliable fastening in medium and high volume applications. Speed Fasteners are single piece fasteners that are either magazine fed or fed via a vibrating bowl to a wide choice of installation equipment. Speed installation technology provides a consistent, repeatable joint.
TIME ANALYSIS CHARTSpeed Fastening is the more efficient system after only 10 placed rivets.
Speed Fastening Systems
140120100806040200
1 10 20 30 40 50 60 70
B
reakstem Systems
Placed Rivets
Time
product overviewGroviT® avTroniC® avserT®
avlUG®
briv® ChoberT®
rivsCreW® rivsCreW® pl
Your Byler representative can help you choose the correct combination of:
+ + +
fastener tool nose equipment mandrel & spring
mandrel spring
Magazine fed fasteners
• Bulbed Tail• Large headform• High clamp & shear• Available in Stainless Steel
• Internal tapered bore• Controlled clamp• For soft & brittle materials
• Designed for blind hole applications• Annular grooves• Use in wood, plastic, fiberglass, aluminum
• Attaches DIN 41612 connectors & other components to PCB’s• Annular grooves on body
• Threaded stand-off pillars for PCB’s• Internally threaded bore• Many stand-off heights
• Threaded fastener• Removable & reusable with hex key• Fastens into materials
• Solderable terminal posts for PCB’s• Rolled/knurled shank
• Designed for soft & hard plastics• Wide grip range from 3 to 11.8mm covered by one fastener
Consider... 1. Removability 2. Clamp 3. Head style 4. Application 5. Alloy
HOW TO CHOOSE THE SPEED FASTENER YOU NEED!
Call Byler Rivettoll free 800-325-3147
Tel: 800-325-3147 or 972-986-6792
20
speed fasTeninGbriv®
briv® Mandrel & spring
DIMENSIONS STANDARD NOSE EQUIPMENT
LONG NOSE EQUIPMENT
TYPE DIA. DESCRIPTION H* P MAX.* MANDREL # SPRING # MANDREL # SPRING #
Aluminum/Steel
1/8standard greenoversize yellow
.092
.097.120.126
07271-0641407271-06514
07150-0681407271-0741407271-07514
07150-07814
5/32standard greenoversize yellowoversize blue
.110
.115
.120
.136
.142
.149
07150-0601507150-0611507150-06215
07170-0687507150-0701507150-0711507150-07215
07170-07875
mandrel spring
BRIV® mandrels also available in Stainless Steel:
3/32”, 1/8”, 5/32” & 3/16”
DOME/MUSHROOM HEAD (1801)
COUNTERSUNK HEAD (1802)
benefits:• Low Cost Substantial savings when Briv® fasteners are substituted for spot welds, loose hardware or traditional nail rivets.
• Fast Installation Magazine-fed fasteners can be installed by semi automatic or fully auto- mated systems.
• Versatile Wide range of mandrel sizes enables Briv® rivets’ expansion to accommo- date hole size variations.
• High ClampThe bulbed tail and for shortening of the fastener during installation ensures consistent high clamp and shear.
Also available in other alloys:steel dome 1821
steel countersunk 1822
brass dome 1833
stainless steel dome 1841
Standard mandrel
TYPE DIA. MFG.PART #
BYLERPART #
GRIPRANGE
RIVET DIMENSIONS MIN VALUES (LBS)
HOLE SIZEAHD
BHH
C LENGTH
D SHEAR TENSILE
DOME/MUSHROOM
HEADAll Aluminum
(1801)
1/8
01801-0040301801-0040401801-0040601801-0040801801-0041001801-0041201801-0041401801-00416
1818010040318180100404181801004061818010040818180100410181801004121818010041418180100416
.025-.075
.045-.095
.085-.135
.125-.175
.165-.215
.205-.255
.245-.295
.285-.335
.257 .039
.152
.172
.212
.252
.292
.332
.372
.412
.1235 170 295 .1285-.1315
5/32
01801-0050501801-0050601801-0050701801-0050901801-00511
1818010050518180100506181801005071818010050918180100511
.062-.115 .085-.135.105-.155.145-.195.185-.235
.322 .039
.193
.213
.233
.273
.313
.1525 255 390 .1562-.1592
COUNTER-SUNKHEAD
All Aluminum(1802)
1/8
01802-0040601802-0040701802-0040801802-0041001802-00411
1818020040618180200407181802004081818020041018180200411
.060-.110
.100-.150 .140-.190.180-.230.220-.270
.235 .035
.188
.228
.268
.308
.348
.1245 170 295 .1285-.1315
5/3201802-0050501802-0050601802-00507
181802005051818020050618180200507
.062-.115
.085-.135
.105-.155.275 .040
.204
.224
.244.1535 255 390 .1562-.1592
3/32” & 3/16” diameter Briv fasteners available. Ask for details.
3/32” & 3/16” nose equipment available. Ask for details. *H & P Max dimensions in mm.
Tooling available to set these fasteners on page 63
Model 7537
Tel: 800-325-3147 or 972-986-6792
21
speed fasTeninGChoberT® riveTs
TYPE DIA. MFG.PART #
BYLERPART #
GRIPRANGE
RIVET DIMENSIONS MIN VALUES (LBS) HOLE SIZE
A B C D SHEAR
DOME/MUSHROOM
HEADAll Aluminum
(1121)
1/8
01131-0040401131-0040601131-0040801131-0041001131-00412
180113100404180113100406180113100408180113100410180113100412
.000-.062 .062-.125 .125-.187.187-.250.250-.312
.217 .045
.125
.187
.250
.312
.375
.1285 180 .1290-.1315
5/32
01131-0050601131-0050801131-0051001131-0051201131-0051401131-00516
180113100506180113100508180113100510180113100512180113100514180113100516
.062-.125
.125-.187
.187-.250
.250-.312
.312-.375
.375-.437
.257 .058
.187
.250
.312
.375
.437
.500
.1595 360 .161-.164
Mandrel & spring DIMENSIONS STANDARD NOSE EQUIPMENT LONG NOSE EQUIPMENT
TYPE DIA. DESCRIPTION H P MAX.
P (S/R) MANDREL # SPRING # MANDREL # SPRING #
BRASS, ALUMINUM,
STEEL
1/8
standard greenoversize yellowoversize blueoversize red
.088
.092
.098
.102
.216
.237
.268
.288
.090
.098
.110
.118
07150-0600407150-0610407150-0620407150-06304
07150-06804
07150-0700407150-0710407150-0720407150-07304
07150-07804
5/32
standard greenoversize yellowoversize blueoversize red
.107
.115
.122
.132
.244
.284
.320
.372
.100
.116
.130
.150
07150-0600507150-0610507150-0620507150-06305
07170-06875
07150-0700507150-0710507150-0720507150-07305
07170-07875
mandrel spring
Short Reach (S/R) mandrel
benefits:• Light Clamp
Internally tapered bore ensures consistent light clamp to reduce potential damage to materials.
• For Soft & Brittle Materials• Efficient
Expands radially during installation to ensure maximum hole fill.
briv® & ChoberT® nose equipment STANDARD & STANDARD CAM
BYLER PART #: 07150-03005
FLAT UNIVERSAL RECESSED TAPERED
DIMENSIONS
TYPE DIA. NOSE EQUIPMENT MFG # BYLER # B D E
BRIV® &
CHOBERT®
1/8standard
standard cam07150-0300407170-04600
50207150046005020717004600
.41 1.18 .20
5/32standard
standard cam07150-0300507170-04700
50207150030055020717004700
.48 1.30 .24
Long, Limited Access & Curved nose assemblies also available!
(1131)
Standard mandrel
Also available 3/32” - 1/4” in steel and brass. Countersunk headstyle also available.
7536 Tool 7537 Toolpage 63
753 Toolpage 65
briv® & ChoberT® Tooling
Tel: 800-325-3147 or 972-986-6792
22
TYPE DIA. MFG.PART #
BYLERPART #
GRIPRANGE
V
RIVET DIMENSIONS MIN VALUES (LBS.) PER POD
FRONT SHEET
MIN-MAX
REAR SHEET
MIN-MAXA C D E F G W SHEAR TENSILE
DOME/MUSHROOM
HEADZinc Plated
Steel(1722)
3.5mm
01722-0350601722-0350701722-0350901722-0351001722-0351101722-0351201722-03517
181722035061817220350718172203509181722035101817220351118172203512 18172203517
.112
.151
.190
.229
.268 .307.463
.235
.202
.241
.280
.319
.359
.397
.553
.1215 .240 .055
.157
.196
.235
.274
.314
.352
.508
.064 225 225
62524338343021
.138-.141 .122-.125
4.0mm
01722-0400601722-0400701722-0400901722-0401001722-0401101722-0401201722-04015
18172204006181722040071817220400918172204010181722040111817220401218172204015
.112
.151
.190
.229
.268
.307
.385
.245
.202
.241
.280
.319
.359
.397
.475
.1415 .250 .055
.157
.196
.235
.274
.314
.352
.430
.064 292 270
62524338343025
.165-.168 .142-.145
rivsCreW®
GroviT®
RIVSCREW® is a threaded, removable speed fastener that combine the speed of rivet placement with the accessibility of a screw.
avTroniC® avserT® avlUG®
Available in aluminum & steel in 3/32” - 3/16”
Available in aluminum & brass in 2.5mm, 2.8mm
Available in short & long spigots in 2.5mm, 3mm brass
Available in 1/16, 3/32,1/8 diameters in brass
Benefits:• Designed for blind hole
applications in wood, fiber-glass, plastics, aluminum & harder substrates.
• Provides a vibration resistant joint and increased pullout resistance.
Benefits:• Annular grooves on the
body expand radially during installation.
• Provide a vibration resistantjoint, increased pull-out resistance and good residual clamp.
• Various body lengths provide a wide grip range to accommodate most combinations of connector and PC board thickness.
Benefits:• Internally threaded bore
takes a threaded part.
• Available in many stand-offheights to accommodate a wide variety of compo-nents.
• Can be used for boardthicknesses of 0.8 - 2.0mm (short spigot) or 0.8 - 2.4 mm max (long spigot).
Benefits:• Rolled/knurled shank
ensures secure placement in the PCB.
• Suitable for wire wrappingor a test point for CRO tubes.
• Available with diameters assmall as 1.6 mm for assembly of smaller components.
specialty speed fasteners
• VersatileCan be used to fasten most materials up to Vickers hardness 105 HV5.
• ExpansiveExpands radially during installation to form a thread in material, eliminating the risk of torque & strip out.
• RemovableRemovable for servicing with a hex key & reusable.
Also available in 2.8mm & 3.0mm; Minimums may apply
Also available:
rivsCreW® pl for plastics
benefits:
(1722)
speed fasTeninG
Tel: 800-325-3147 or 972-986-6792
23
nYlon riveTs®
Available in other colors. Minimums may apply.
TYPE HEAD STYLE DIA. & LENGTH BYLER PART# HOLE SIZE
Nylon Body Steel Pin
(zinc-plated pin)MUSHROOM TRUSS HEAD
1/4 x 3/41/4 x 1
1/4 x 1-1/21/4 x 21/4 x 31/4 x 4
130812113081611308241130832113084811308641
(.257)Use “F”Drill Bit
#16623651Nylon Body
Steel Pin(zinc-plated pin)
COUNTERSUNKHEAD
1/4 x 3/41/4 x 1
1/4 x 1-1/2
130812213081621308242
nYlon Tap-iT®
drive riveTs (nylon rivet / steel pin)nYlon Uni-Tap®
drive riveTs (solid one-piece nylon rivet)
nylon insulating drive rivets (nylon rivet / nylon pin)
Mushroom Truss Head
Truss Head Countersunk Head
Countersunk Head
TYPE DIA. & LENGTH PART # GRIP
RANGEDRILL SIZE
NylonBody
1/4 x 11/4 x 1-1/21/4 x 2-1/81/4 x 2-5/8
13086460130866601308676013086761
3/16 - 1/23/8 - 1-1/87/8 - 1-5/8
1-3/8 - 2-1/8
9/32 or “K” Part
#16687060
NOTE: Pins are available in aluminum and various nylon composites.Mutiple colors available (special) Mins may apply: Beige, Soft Beige, Dark Gray, Light Gray, Almond (Colonial), and Maroon. Lengths available up to 6 inches. Mins may apply.
DO NOT hit pin at an angle. DO NOT use heavy blows. If pin is not flush, do not use force. Remove rivet and check to make sure hole is deep enough, wide enough, and free from debris. Try again.
Installation tools: A drill and Hammer (hard plastic preferable)
TYPE HEAD STYLE DIA. & LENGTH COLOR BYLER PART #
Nylon BodyNylon Pin
TRUSSUse “F” (.257”)
Drill Bit#16623651
1/4 X 3/4
whiteblack
naturalclear
38302054230383020542283830205422738302054200
1/4 X 1whiteblackgray
383020545303830205452838302054502
1/4 x 1-1/2 white 383020546301/4 X 2 white 383020547301/4 X 3 white 38302054930
82°COUNTERSUNK
Use “F” (.257”)Drill Bit
#16623651
1/4 X 3/4 whitenatural
3830206423038302064227
1/4 X 1white
naturalsafety yellow
383020645303830206452738302064514
1/4 x 1-1/2 white 38302064630
Ideal for Fastening Wall Panels, Ceiling Panels, Plastic Fences, Sign Panels, and Fixtures!!
Accepted for use in areas where sanitation is a must:• Transportation• Kitchens & Food Processing• Cold Storage
• Non-Toxic & Colorfast• Non-Corrosive• Will Not Stain• Aids Thermal Insulation• Head will not snag or accumulate dirt.
Benefits:
Solves condensation and freezing problems. Able to withstand temperatures to -60F.
Tel: 800-325-3147 or 972-986-6792
24
alUMinUM drive riveTs
TYPE1/8 DIA. PART # 1/8
L1/8 & 5/32 GRIP RANGE 5/32
L5/32 DIA. PART #
UNIVERSAL 78° CSK BRAZIER MIN. NOM. MAX. UNIVERSAL 78° CSK
2117ALUMINUM
BODY302
STAINLESSPIN
38-104-04-1638-104-05-1638-104-06-16
38-504-04-1638-504-05-1638-504-06-16
38-204-04-1638-204-05-1638-204-06-16
.219
.250
.281
.109
.141
.172
.125
.156
.188
.141
.172
.203
.250
.281
.312
38-105-04-1638-105-05-1638-105-06-16
38-505-04-1638-505-05-1638-505-06-16
TYPE3/16 DIA. PART # 3/16
L3/16 & 1/4 GRIP RANGE 1/4
L1/4 DIA. PART #
UNIVERSAL BRAZIER MIN. NOM. MAX. UNIVERSAL 100° CSK BRAZIER
2117ALUMINUM
BODY
2024ALUMINUM
PIN
38-106-03-1638-106-04-1638-106-06-1638-106-08-1638-106-10-1638-106-12-16
38-206-03-1638-206-04-1638-206-06-1638-206-08-1638-206-10-1638-206-12-16
.250
.281
.344
.406
.469
.531
.047
.078
.141
.203
.266
.328
.094
.125
.188
.250
.313
.375
.141
.171
.235
.297
.360
.422
.250
.281
.344
.406
.469
.531
38-108-03-1638-108-04-1638-108-06-1638-108-08-1638-108-10-1638-108-12-16
NANA
38-508-06-1635-508-08-1635-508-10-1635-508-12-16
38-208-02-1338-208-04-1638-208-06-1638-208-08-1638-208-10-1638-208-12-16
38-106-14-1638-106-16-1638-106-18-1638-106-20-1638-106-22-1638-106-24-16
38-206-14-1638-206-16-1638-206-18-1638-206-20-16
NA38-206-24-16
.594
.656
.719
.781
.844
.906
.391
.453
.516
.578
.641
.703
.438
.500
.563
.625
.688
.750
.485
.547
.610
.672
.735
.797
.594
.656
.719
.781
.844
.906
38-108-14-1638-108-16-1638-108-18-1638-108-20-1338-108-22-1638-108-24-16
35-508-14-1635-508-16-1635-508-18-1635-508-20-1638-508-22-1638-508-24-16
38-208-14-1638-208-16-1638-208-18-1638-208-20-1638-208-22-1638-208-24-16
38-106-26-1638-106-28-16
NA38-106-32-1638-106-36-16
NA
38-206-26-1638-206-28-1638-206-30-1638-206-32-16
NANA
.9691.0311.0941.1561.281
NA
.766
.828
.891
.9531.0781.328
.813
.875
.9381.0001.1251.375
.860
.922
.9851.0471.1721.422
.9691.0311.0941.1561.2811.531
38-108-26-1638-108-28-1638-108-30-1638-108-32-1638-108-36-1638-108-44-16
38-508-26-1638-508-28-1638-508-30-1638-508-32-16
NANA
38-208-26-1638-208-28-1638-208-30-16
NANANA
1/8” 5/32”
TYPE5/16 DIA. PART # 5/16
L5/16 GRIP RANGE 3/8 DIA.
PART # 3/8 GRIP RANGE 3/8L
UNIVERSAL MIN. NOM. MAX. UNIVERSAL MIN. NOM. MAX.
2117 ALUMINUM
BODY2024
ALUMINUMPIN
38-110-06-1638-110-09-1638-110-12-1638-110-16-1638-110-18-16
.437
.531
.625
.719
.813
.132
.226
.320
.414
.508
.188
.281
.375
.469
.563
.242
.336
.430
.524
.618
38-112-06-1638-112-19-1638-112-12-1638-112-15-1638-112-18-16
.125
.219
.313
.406
.500
.188
.281
.375
.469
.562
.250
.344
.437
.531
.625
.500
.594
.688
.781
.875
3/16” 1/4”
5/16” 3/8”
uNIVeRSAL BRAZIeR78° COuNTeRSuNK uNIVeRSAL
uNIVeRSAL BRAZIeR uNIVeRSAL BRAZIeR100° COuNTeRSuNK
*SCHemATIC pICTuReS ARe ACTuAL SIZe
78° COuNTeRSuNK
Tel: 800-325-3147 or 972-986-6792
25
drive riveTs
Masonry
Tamper proof pin (Tpp)
Installation Instructions:1.Use a carbide tipped spiral masonry drill, same diameter as the rivet (.188) or (.250). Drill deep enough to permit full insertion of the rivet. 2.Insert rivet through material to be attached and into the wall.3. Drive the pin just flush with rivet head, using ordinary hammer. Rivet prongs expand deep in masonry.
TAMPER PROOF PIN 3/16 DIA. DRILL/HOLE SIZE = #11 / .191
TYPE OFRIVET
(.468) HEAD DIA. GRIP RANGEL
(.615) HEAD DIA. PART # MIN. NOM. MAX. PART #
2117 ALUMINUM
BODY
5056 ALUMINUM
PIN
3810-99-106-113810-99-106-123810-99-106-133810-99-106-14
.075
.175
.275
.375
.125
.219
.313
.406
.175
.275
.375
.475
.500
.594
.688
.781
(38)10-99-108-11(38)10-99-108-12(38)10-99-108-13(38)10-99-108-14
linerLINER RIVETS 3/16 DIA. (.188) DRILL/HOLE SIZE = #11 / .191
TYPE PART #GRIP RANGE
LMIN. NOM. MAX.
2117ALUMINUM
BODY2024
ALUMINUMPIN
3810-11-706-133810-12-706-133810-13-706-133810-14-706-133810-15-706-133810-16-706-133810-17-706-133810-18-706-133810-19-706-13
.075
.175
.275
.375
.475
.575
.675
.775
.875
.125
.219
.313
.406
.531
.625
.719
.813
.906
.175
.275
.375
.475
.575
.675
.775
.875
.975
.281
.391
.484
.578
.688
.781
.875
.9841.078
MASONRY RIVETS 3/16 & 1/4 DRILL/HOLE SIZE = F / .257
TYPE3/16 DIA (.188)
L3/16 & 1/4 GRIP RANGE 1/4 DIA (.250)
PART # MIN. NOM. MAX. PART #
2117ALUMINUM
BODY302
STAINLESSPIN
38-206-32-16N/AN/A
1.1561.2811.531
.9531.0781.328
1.0001.1251.375
1.0471.1721.422
38-108-32-1638-108-36-1638-108-44-16
benefits of drive rivets:• Fast, easy installation in a wide variety of materials• No special tools required, only a hammer• Tamper-resistant, tamper-evident styles• Clamping action
steelSTEEL DRIVE RIVETS 3/8 DIA. (.375) DRILL/HOLE SIZE = 25/64 / .386
TYPE OFRIVET
UNIVERSAL HEAD GRIP RANGEL
PART # MIN. NOM. MAX.LOW CARBON STEEL BODY
LOW CARBON
STEEL PIN
38-112-06-9138-112-09-9138-112-12-9138-112-15-9138-112-18-91
.125
.219
.313
.406
.500
.188
.281
.375
.469
.562
.250
.344
.437
.531
.625
.500
.594
.688
.781
.875
benefits:• Non-snag head • Available in 2 head diameters• Special recessed pin resists being drilled out
DRILL BITSDRIVE RIVET
HOLE SIZE
DRILL SIZE
1/85/323/161/4
5/163/8
.128. 161.191.257.323.386
#30#20#11F
21/6425/64
sUGGesTed
drillbiTs!
We Stock Wire, Gauge & Letter SizesDrill Bits on pages 54-58
N/A = not available in 3/16
Tel: 800-325-3147 or 972-986-6792
26
100º COUNTERSUNK HEAD - 426DIA.“D”
HEAD DIA. “A”
HEAD HEIGHT “H”
1/85/323/161/4
5/163/8
.216
.278
.344
.467
.555
.685
.042
.055
.070
.095
.106
.134
ROUND HEAD - 430DIA.“D”
HEAD DIA. “A”
HEAD HEIGHT “H”
1/85/323/161/4
5/163/8
.250
.312
.375
.500
.625
.750
.094
.117
.140
.187
.234
.281
MODIFIED BRAZIER HEAD - 456DIA.“D”
HEAD DIA. “A”
HEAD HEIGHT “H”
1/85/323/161/4
5/163/8
.235
.312
.390
.468
.625
.781
.047
.063
.078
.094
.125
.156
UNIVERSAL HEAD - 470DIA.“D”
HEAD DIA. “A”
HEAD HEIGHT “H”
1/85/323/161/4
5/163/8
.250
.312
.375
.500
.625
.750
.059
.072
.085
.112
.138
.166
installation Tooling - air hammers
#60117
#60121
MODELS SPECIFICATIONS #60115 #60117 #60121 #60714 #60717Chisel Shank Dia.Blows Per MinuteBore Dia. Stroke LengthNet Wt. Overall LengthAvg. Air ConsumptionAir Inlet Min. Hose Size
.401”5,000
3/4”1 5/8”3 lbs
5 1/4”2 cfm
1/4”3/8”
.401”2,00011/16”3 1/2”
5 1/2 lbs9”
3 cfm1/4”3/8”
.401”3,000
3/4”2 9/32”
3 5/8 lbs7 3/8”3 cfm
1/4”3/8”
.401”20009/16”
3 3/23”3 1/3 lbs
N/A2.13 cfm
1/4”3/8”
.489”1,800
3/4”2 11/16”4 3/4 lbs
N/A3 cfm
1/4”3/8”
#60115
(For LOW volume installation) #60714 & #60717 AVAILABLE FOR 3/8 DIA. RIVETS!
#60717
#60714
BRAZIER HEAD - 455DIA.“D”
HEAD DIA. “A”
HEAD HEIGHT “H”
1/85/323/161/4
5/163/8
.312
.391
.467
.625
.780
.937
.062
.078
.094
.125
.156
.187
BUTTON HEAD - 435DIA.“D”
HEAD DIA. “A”
HEAD HEIGHT “H”
5/323/161/4
5/163/8
.273
.328
.437
.546
.656
.117
.141
.187
.234
.281
Trapezoidal head with bevel shank
Trapezoidal Bar head with chamfer shank
Trapezoidal rivet set in stock for 3/16” diameter (Part # 47100396)Call for quotes on Flat head Tinner rivets and
78º Countersunks
78º
Also Available!
• Manufactured to Commercial Specifications & Tolerances.
Note:
• Lengths available from 1/4” to 3” depending on shank diameter.• Point styles include Chamfer, Bevel Point, and Plain End.
REC. DRILL SIZE & HOLE DIAMETER
RIVET SIZE
DRILL NO.
HOLE DIA.
5/323/161/4
5/163/8
2111FPW
.159
.191
.157
.323
.386
ALLOYS AVAILABLEAluminum
(1100F - Soft)(2117T4 - Hard)
SteelStainless Steel
Copper BrassMonel
Minimums may apply.
Mins. may apply.
Call Byler Rivet for quotes on alternate shank diameters, lengths, and styles
solid riveTs
Tel: 800-325-3147 or 972-986-6792
27
Mins. may apply.
PART # GRIP DIA. COLOR CODE4775030447750404477505044775060447750804
0-1/4
3/321/8
5/323/161/4
ZincCopperBlackBrass
Copper47750308477504084775050847750608
0-1/2
3/321/8
5/323/16
ZincCopperBlackBrass
477508081 0-1/2 1/4 Wing Nut Cleco
Cleco fasteners
Chisels
For installation use:
Cleco Pliers
Part # 4775
DRILL SIZERIVET SIZE
DRILL NO.
3/321/8
5/323/16
#40#30#20#10
Specify grip when ordering!
RETAINER SPRINGS
BeehiveQuick Change
Beehive - Part # 476895 for a .401 Part # 476898 for a .498Quick Change - Part # 4761007234
STRAIGHT SHANK BELL SHANK
Follow the 6 steps to build your part #
To choose your rivet set:
TAPERED PUNCHSHANK LENGTH
.401
.4986 1/2”
7”
KNOCK OUT PUNCH
SHANK LENGTH.401.498
6 1/2” 7”
CHISELNO. SHANK BLADE LENGTH912962
.401
.4985/8”5/8”
5 3/4”5 3/4”
910960
.401
.4983/4”5/8”
6 1/2” 7”
Door rivet head style available!Part # 47104508
• Firmly holds together sheet metal materials while other operations are completed.
• Plier-operated.
• Spring loaded with a strong, durable steel plated body.
benefits:
Available upon request: 10º offsets, flush sets, and extended lengths.Minimums may apply
RIVET STYLE CHART
RIVET HEAD STYLERIVET DIAMETER NUMBER
1/8 5/32 3/16 1/4 5/16 3/8BrazierModified BrazierRoundFlatUniversalButtonTubular (door rivet)Trapezoid
455456430442470435450039
4444444
NA
5555555
NA
66666666
88888888
1010101010101010
12121212121212NA
*7 1/2”, 10 1/2”, and 13 1/2” lengths available upon request.
SHANK CHARTRIVET DIA. TYPE LENGTH* SHANK NO.
1/8” - 1/4”
.401 STRAIGHT SHANK
3 1/2”5 1/2”
47104711
.498 STRAIGHT SHANK
3 1/2”5 1/2”
47304731
5/16” - 3/8”
.401 BELL SHANK
3 1/2”5 1/2”
47504751
.498 BELL SHANK
3 1/2”5 1/2”
47704771
3. CHOOSE YOUR LENGTH
2. CHOOSE YOUR SHANK
4. SHANK # I
S NOW
DETERMINED
1. CHOOSE THE RIVET DIA.
YOU ARE SETTING
5. CHOOSE YOUR
RIVET HEAD STYLE
6. CHOOSE YOUR RIVET
DIAMETER NUMBER
To order specify:1. Rivet Diameter2. Shank Diameter
Part Number Description
4710Straight Shank
455 Brazier Head
6 3/16 Dia
EXAMPLE 1 -- Part Number
Description 4770
Bell Shank 470 Universal Head
12 3/8 Dia
EXAMPLE 2 --
riveT seTs
Tel: 800-325-3147 or 972-986-6792
28
door riveTs / seMi-TUbUlar riveTs®
AG
H
FD
C
BE
The length increments are 1/64”. The maximum rivet diameter is .500”.Special diameter, lengths and shapes are manufactured according to customers requests. Miminums may apply.
OvalFlatCountersunk
Head Styles
To use a semi-tubular rivet:1. Choose the shank size to fit the hole in the assembly.2. Choose the head style that fits your application (the bigger the head the stronger the rivet)3. To figure the length, add the material thickness to the clinch allowance from the table above. 4. This number can be rounded to the nearest 1/64” or 1/32”.5. Select Head Style - Oval, Truss, CSK, Flat.6. Select Alloy - Zinc, Zinc plated, Nickel plated.
how to calculate semi-Tubular rivet lengthExample:To calculate rivet length for a 3/16: rivet (0.187)
Rivet length is rounded to the nearest fraction: 0.469 (15/32”)
Material thickness: 3/16” clinch allowance:Total:
0.350”0.110”0.460”
C-type Squeeze Riveters
Rivet setsFlush Squeezer set Cupped Squeezer set
Call Byler Rivet for tooling infotoll free 800-325-3147
SHANK HEAD STYLE
DIA. SHANK HEAD STRAIGHT HOLE TAPERED HOLECLINCH
ALLOWANCEDRILL SIZE
ADIA.
BLENGTH
CDIA.
DHEIGHT
GDIA.
HDEPTH
GDIA.
TAPERED HOLE DIA.
HDEPTH
1/16 Oval 1.60 .058-.061 ± .007 .104-.114 .015-.019 .039-.044 .040-.044 .042-.046 .032 .042 .0321/16 Truss 1.60 .058-.061 ± .007 .120-.130 .015-.019 .039-.044 .040-.044 .042-.046 .032 .042 .0323/32 Oval .093 .085-.089 ± .007 .142-.152 .020-.026 .062-.068 .063-.067 .064-.068 .050 .057 .0453/32 Truss .093 .085-.089 ± .007 .182-.192 .020-.026 .062-.068 .063-.067 .064-.068 .050 .057 .0453/32 Oval .104 .095-.099 ± .007 .182-.192 .026-.032 .070-.076 .070-.074 .072-.076 .057 .065 .0551/8 Oval .128 .118-.123 ± .007 .213-.223 .030-.038 .084-.090 .086-.090 .091-.095 .079 .082 .0621/8 Truss .128 .118-.123 ± .007 .276-.286 .030-.038 .084-.090 .086-.090 .091-.095 .079 .082 .0629/64 Oval .152 .141-.146 ± .010 .229-.239 .035-.045 .100-.107 .099-.103 .106-.112 .085 .104 .0939/64 Truss .152 .141-.146 ± .010 .306-.318 .035-.045 .100-.107 .099-.103 .106-.112 .085 .104 .0935/32 .165 .151-.156 ± .010 .306-.318 .035-.045 .106-.113 .106-.110 .111-.117 .103 .115 .0933/16 Oval .196 .182-.188 ± .010 .306-.318 .055-.065 .134-.141 .136-.140 .139-.145 .110 .135 .1103/16 Truss .196 .182-.188 ± .010 .369-.381 .055-.065 .134-.141 .136-.140 .139-.145 .110 .135 .1103/16 .196 .182-.188 ± .010 .493-.507 .071-.085 .134-.141 .136-.140 .139-.145 .110 .135 .1101/4 .266 .244-.252 ± .010 .430-.444 .061-.075 .176-.184 .173-.177 .181-.191 .150 .183 .1561/4 Oval .266 .244-.252 ± .010 .493-.507 .071-.085 .176-.184 .173-.177 .181-.191 .150 .183 .1565/16 .328 .370-.375 ± .010 .554-.570 .088-.098 .209-.213 .245-.255 N/A N/A N/A .1883/8 .390 .370-.375 ± .010 .554-.570 .088-.098 .281-.285 .308-.318 N/A N/A N/A .2193/8 Oval .390 .370-.375 ± .010 .618-.632 .012-.130 .281-.285 .308-.318 N/A N/A N/A .219
Not responsible for errors in data tables. Please check with our sales department to confirm specs.
steel door rivetsSIZE PART #
1/4 x 1 x 1/21/4 x 1 x 3/41/4 x 1 1/16 x 3/41/4 x 1 1/8 x 3/41/4 x 1/4 x 3/41/4 x 1 3/8 x 3/4
173608162173608164173608174173608184173608204173608224
Used to determine
length
semi-Tubular rivets
Tubular rivet sets in stock to set these door rivets.
See Page 27
Tel: 800-325-3147 or 972-986-6792
29
Rivet length is rounded to the nearest fraction: 0.469 (15/32”)
Threaded inserTs
Part NumberExample: BLS4-420-165
BLProduct StyleLarge FlangeKnurled BodyThin Wall Series
SMaterialS - Steel 1010/1008A - Aluminum 5056
- 420Thread Call Out
- 165Grip
Call Out
(__)TypeEmpty - Open EndB - Closed EndS - Sealed
4Finish4 - Steel - Zinc/Yellow Dichromate
1 2 3 4 5 6
Other Options Available:
Sealed Wedged
OPEN END CLOSED END
Part Numbering System
Special order materials available: brass, stainless, & monel. Minimums will apply.Clear protective coating on steel, aluminum & brass material. Minimums will apply.
THREAD SIZE
THREAD CALL OUT
GRIP RANGE
GRIP CALL OUT
HOLE SIZE+.006-.000
OPEN END TYPE CLOSED END TYPEHD
±.010±.025*
HH±.003
L±.015
DMAX.
ILMAX.
LB±.015
ILBMAX.
IATD*MAX.
6-32 UNC 632632
.020-.080
.080-.13080
130 .2656 .390 .030 .420.470 .265 .305 .740 .640
.580.610.670
8-32 UNC 832832
.020-.080
.080-.13080
130 .2656 .390 .030 .420.470 .265 .305 .740 .640
.580.610.670
10-24 UNC 10241024
.020-.130
.130-.225130225 .2969 .415 .030 .475
.585 .296 .315 .990 .845.735
.730
.840
10-32 UNF 10321032
.020-.130
.130-.225130225 .2969 .415 .030 .475
.585 .296 .315 .990 .845.735
.730
.840
1/4-20 UNC 420420
.027-.150
.165-.260165260 .3906 .500 .030 .580
.680 .390 .380 1.190 1.005.905
.8951.035
5/16-18 UNC 518518
.027-.150
.150-.312150312 .5312 .685* .035 .690
.805 .530 .470 1.390 1.1751.025
.9951.120
3/8-16 UNC 616616
.027-.150
.150-.312150312 .5312 .685* .035 .690
.805 .530 .470 1.390 1.1751.025
.9951.120
1/2-13 UNC813813813
.063-.200
.200-.350
.350-.500
200350500
.6875 .865 .0471.1501.3001.450
.685 .850 2.3652.0701.9201.770
1.505
standard larGe flanGe KnUrled bodY Thin Wall series
*Dimensions in minimum grip condition. Minimums may apply.
THREAD SIZE
THREAD CALL OUT
GRIP RANGE
GRIP CALL OUT
HOLE SIZE+0,15-0,00
OPEN END TYPE CLOSED END TYPEHD
±0,25±0,64*
HH±0,08
L±0,38
DMAX.
ILMAX.
LB±0,38
ILBMAX.
IATD*MAX.
M4 x 0,7 ISO 470470
0,50-2,002,00-3,30
2.03.3 6,75 9,91 0,76 10,67
10,67 6,73 7,757,75 18,80 16,26
14,7315,4917,02
M5 x 0,8 ISO 580580
0,50-3,303,30-5,70
3.35.7 7,60 10,54 0,76 12,07
14,86 7,52 8,008,00 25,15 21,46
18,6718,5421,34
M6 x 1,0 ISO 610610
0,70-4,204,20-6,60
4.26,6 10,00 12,70 0,76 14,73
17,27 9,91 9,659,65 30,23 25,53
22,9922,7326,29
M8 x 1,25 ISO 81258125
0,70-3,803,80-7,90
3.87.9 13,50 17,40* 0,89 17,53
20,45 13,46 11,9410,80 35,31 29,85
26,0425,2728,45
M10 x 1,5 ISO 10151015
0,70-3,803,80-7,90
3.87.9 13,50 17,40* 0,89 17,53
20,45 13,46 11,9410,80 35,31 29,85
26,0425,2728,45
M12 x 1,75 ISO121751217512175
1,60-5,105,10-8,908,90-12,7
5.18.9
12.717,45 21,97* 1,19
29,2133,0236,83
17,421,5921,5921,84
60,0752,5848,7744,96
38,23
*Dimensions in minimum grip condition. Minimums may apply.
Metric larGe flanGe KnUrled bodY Thin Wall series
Tel: 800-325-3147 or 972-986-6792
30
Threaded inserTs
Part Number Example: BKS4-420-165
BKProduct StyleSmall FlangeKnurled BodyThin Wall Series
SMaterialS - Steel 1010/1008A - Aluminum 5056
- 420Thread Call Out
- 165Grip
Call Out
(__)TypeEmpty - Open EndB - Closed End
4Finish4 - Steel - Zinc/Yellow Dichromate
1 2 3 4 5 6
• Virtually flush installations• Exceptional torque strength• Superior thread strength
• Inventory reduction is possible due to wide grip range
benefits:
Threaded Unified 2B/21 per ASME B1.1Specifications: Metric 6H/21 per ASME B1.13M
OPEN END CLOSED END
THREAD SIZE
THREAD CALL OUT
GRIP RANGE
GRIP CALL OUT
HOLE SIZE+.006-.000
OPEN END TYPE CLOSED END TYPEHD
±.010HH
±.002L
±.015D
MAX.IL
MAX.LB
±.015ILB
MAX.IATD*MAX.
6-32 UNC 632632
.020-.080
.080-.13080
130 .2656 .310 .019 .420.470 .265 .305 .740 .640
.580.610.670
8-32 UNC 832832
.020-.080
.080-.13080
130 .2656 .310 .019 .420.470 .265 .305 .740 .640
.580.610.670
10-24 UNC 10241024
.020-.130
.130-.225130225 .2969 .340 .019 .475
.585 .296 .315 .990 .845.735
.730
.840
10-32 UNF 10321032
.020-.130
.130-.225130225 .2969 .340 .019 .475
.585 .296 .315 .990 .845.735
.730
.840
1/4-20 UNC 420420
.027-.150
.165-.260165260 .3906 .455 .022 .580
.680 .390 .380 1.190 1.005.905
.8951.035
5/16-18 UNC 518518
.027-.150
.150-.312150312 .5312 .595 .022 .690
.805 .530 .470.425 1.390 1.175
1.025.995
1.120
3/8-16 UNC 616616
.027-.150
.150-.312150312 .5312 .595 .022 .690
.805 .530 .470.425 1.390 1.175
1.025.995
1.120
standard sMall flanGe KnUrled bodY Thin Wall series
*Dimensions in minimum grip condition.
THREAD SIZE
THREAD CALL OUT
GRIP RANGE
GRIP CALL OUT
HOLE SIZE+0,15-0,00
OPEN END TYPE CLOSED END TYPEHD
±0,25HH
±0,05L
±0,38D
MAX.IL
MAX.LB
±0,38ILB
MAX.IATD*MAX.
M4 x 0,7 ISO 470470
0,50-2,002,00-3,30
2.03.3 6,75 7,87 0,48 10,67
11,94 6,73 7,757,75 18,80 16,26
14,7315,4917,02
M5 x 0,8 ISO 580580
0,50-3,303,30-5,70
3.35.7 7,60 8,64 0,48 12,07
14,86 7,52 8,008,00 25,15 21,46
18,6718,5421,34
M6 x 1,0 ISO 610610
0,70-4,204,20-6,60
4.26.6 10,00 11,56 0,55 14,73
17,27 9,91 9,659,65 30,23 25,53
22,9922,7326,29
M8 x 1,25 ISO 81258125
0,70-3,803,80-7,90
3.87.9 13,50 15,11 0,55 17,53
20,45 13,46 11,9410,80 35,31 29,85
26,0425,2728,45
M10 x 1,5 ISO 10151015
0,70-3,803,80-7,90
3.87.9 13,50 15,11 0,55 17,53
20,45 13,46 11,9410,80 35,31 29,85
26,0425,2728,45
Metric sMall flanGe KnUrled bodY Thin Wall series
Part Numbering System
Special order materials available: brass, stainless, & monel. Minimums will apply.Clear protective coating on steel, aluminum & brass material. Minimums will apply.
Tel: 800-325-3147 or 972-986-6792
31
TYPE THREAD SIZE
THREAD CALL OUT
GRIP RANGE
GRIP CALL OUT
HOLE SIZE HD HH L D ILMAX.
GRIP ID MARK
STANDARD
10-32 UNC N/A .020-.175.175-.320
175320 .312-.317 .500 .033-.043 .650-.950
.990-1.200 .310 .425 Blank1 Rad
1/4-20 UNC 420420
.020-.280
.280-.500280500 .390-.396 .610-.645 .053-.063 .985-1.015
1.219-1.249 .368-.382 .520 Blank1 Rad
5/16-18 UNC 518518
.020-.280
.280-.500280500 .500-.506 .740-.770 .057-.067 1.126-1.156
1.360-1.390 .490-.495 .775 Blank1 Rad
3/8-16 UNC 616616
.020-.280
.280-.500280500 .594-.600 .865-.895 .083-.093 1.205-1.233
1.237-1.267 .582-.587 .775 Blank1 Rad
METRIC
M5 x 0.8 ISO 580580
0,5-4,454,45-8,10
4.458.1 8,55-8,70 12,45-12,95 0,96 20,65-21,41
23,42-24,18 8,35 10,00 Blank1 Rad
M6 x 1,0 ISO 610610
0,5-7,17,1-12,1
7.112.7 10,00-10,15 15,49-16,38 1,35-1,60 25,02-25,78
30,96-31,72 9,35-9,8 13,21 Blank1 Rad
M8 x 1,25 ISO 81258125
0,5-7,17,1-12,7
7.112.7 12,70-12,85 18,80-19,56 1,45-1,70 28,60-29,63
34,54-35,31 12,47-12,57 19,69 Blank1 Rad
M10 x 1,50 ISO 10151015
0,5-7,17,1-12,7
7.112.7 15,09-15,24 21,97-22,73 2,11-2,36 30,61-31,32
NA 14,78-14,91 19,69 Blank1 Rad
INSTALLED
Designed for use in plastics & thin gauge sheet metal applications where pull-out resistance is required.
Knurled body - standardTHREAD
SIZEHD L D HOLE SIZE
±.005 ±.015 MAX. +.005/-.0006-32 UNC .255 .370 .233 .2348-32 UNC .285 .370 .264 .266
10-24 UNC .320 .370 .295 .29710-32 UNC .320 .370 .295 .2971/4-20 UNC .415 .515 .389 .3915/16-18 UNC .550 .615 .528 .5313/8-16 UNC .615 .740 .590 .594
Knurled body - MetricTHREAD
SIZEHD L D HOLE
SIZE±.013 ±.38 MAX. +.13/-.00
M4 x 0,7 ISO 7.24 9.40 6.71 6.75M5 x 0,8 ISO 8.13 9.40 7.50 7.54M6 x 1,0 ISO 10.54 13.08 9.88 9.92M8 x 1,25 ISO 13.97 15.62 13.41 13.49M10 x 1,5 ISO 15.62 18.80 14.99 15.00
Material thickness .062”/1.57 min.
NOTE:Actual hole size can be affected by parent material and material thickness.
Contact Byler Rivet Supply for details.
• Infinite grip range• High shear strength• Prevents spinning
benefits: • Popular in fiberglass applications• Cadmium Free Plating
Part NumberExample: BRS4-420-280
BRProduct Style
SMaterialS - Steel 1010/1008
- 420Thread Call Out
- 280Grip
Call Out
4Finish4 - Steel - Zinc/Yellow Dichromate
1 2 3 4 5Part Numbering System
pre-bulbed “plusnut®”
Part NumberExample: BWS2-420
BWProduct Style
SMaterialS - Steel C1110*By Special OrderB - Brass 360 or 464
- 420Thread Call Out
4Finish2 - Steel and Brass - Cadmium
1 2 3 4Part Numbering System
Expendable Tool for small volumes:
AAT916Series
Sets thread sizes: • 4-40 thru 1/2-13 • M3 thru M12
Clear protective coating on steel & brass - tin plate material. Minimums will apply.
Threaded inserTs
Tel: 800-325-3147 or 972-986-6792
32
CLOSED END
Threaded inserTs
standardTHREAD
SIZETHREAD
CALL OUT
HOLE DEPTH
MIN.
OPEN END TYPE CLOSED END TYPEMAT.
THICK.030-.090
MAT. THICK
.091-.124
MAT. THICK
.125-.186
MAT. THICK
.187-OVERHD
±.005L
±.015D
MAX.IL
MAX.LB
±.015ILB
MAX.IATD**MAX. DRILL SIZE DRILL SIZE DRILL SIZE DRILL SIZE
4-40 UNC 440 .400 .211 .370 .1875 .205 .660 .495 .395 3/16 #10 #10 #96-32 UNC 632 .400 .240 .370 .2185 .205 .675 .505 .410 7/32 #2 #1 #18-32 UNC 832 .400 .269 .370 .2495 .205 .675 .505 .410 1/4 “F” 17/64 17/64
10-24 UNC 1024 .400 .306 .370 .2805 .205 .685 .520 .385 9/32 “L” “L” 19/64 10-32 UNF 1032 .400 .306 .370 .2805 .205 .685 .520 .385 9/32 “L” “L” 19/64 1/4-20 UNC 420 .540 .400 .515 .3745 .275 1.005 .760 .615 3/8 3/8 “W” 25/64
5/16-18 UNC 518 .640 .528 .615 .4995 .325 1.065 .770 .630 1/2 1/2 33/64 33/64 3/8-16 UNC 616 .770 .588 .745 .5615 .390 1.450 1.095 .890 9/16 9/16 37/64 37/64 1/2-13 UNC 813 .960 .800 .935 .7485 .485 N/A N/A N/A 3/4 49/64 25/32 51/64
MetricTHREAD
SIZETHREAD
CALL OUT
HOLE DEPTH
MIN.
OPEN END TYPE CLOSED END TYPE MAT. THICK0,76-2,29
MAT. THICK2,31-3,15
MAT. THICK3,17-4,72
MAT. THICK4,72-OVER
HD±0,13
L±0,38
DMAX.
ILMAX.
LB±0,38
ILBMAX.
IATD**MAX. DRILL SIZE DRILL SIZE DRILL SIZE DRILL SIZE
M3 x 0,5 ISO 350 10,16 5,36 9,40 4,76 5,21 16,77 12,57 10,03 4,75 (.1875) 4,90 (.1935) 4,90 (.1935) 4,97 (.1960)M4 x 0,7 ISO 470 10,16 6,83 9,40 6,34 5,21 17,15 12,83 10,41 6,35 (.2500) 6,52 (.2570) 6,74 (.2656) 6,74 (.2656)M5 x 0,8 ISO 580 10,16 7,77 9,40 7,12 5,21 17,40 13,21 9,78 7,14 (.2812) 7,36 (.2900) 7,36 (.2900) 7,54 (.2969)M6 x 1,0 ISO 610 13,72 10,16 13,08 9,51 6,99 25,53 19,30 15,62 9,52 (.3750) 9,52 (.3750) 9,80 (.3860) 9,92 (.3906)M8 x 1,25 ISO 8125 16,26 13,41 15,62 12,69 8,26 27,05 19,56 16,00 12,70 (.5000) 12,70 (.5000) 13,09 (.5156) 13,09 (.5156)M10 x 1,5 ISO 1015 19,56 14,94 18,92 14,26 9,91 36,83 27,81 22,61 14,28 (.5625) 14,28 (.5625) 14,68 (.5781) 14,68 (.5781)M12 x 1,75 ISO 12175 24,38 20,32 23,75 19,01 12,32 N/A N/A N/A 19,05 (.7500) 19,44 (.7656) 19,83 (.7810) 20,24 (.7970)
**Dimensions in minimum grip condition.
Part # 0202112AA112 Plier Tool
IDEAL FOR B-T & B-W SERIES
Actual hole size can be affected by parent material and material thickness. Contact Byler Rivet Supply for details.
• High shear strength• Great for limited clearance applications• Reduces inventory
• Installs into a variety of materials
benefits:OPEN END
Part NumberExample: BTS2-610
BTProduct Style
(__)TypeBlank - Open End*By Special Order502 - Closed End
2Finish2 - Steel, Aluminum, Stainless and Brass - Cadmium
- 610ThreadCall Out
SMaterialS - Steel C1008 or C1010A - Aluminum 6061-T6
1 2 3 4 5Part Numbering System
ARO Brand Pneumatic Tools SSG800 Series Spin-Spin Tool
Sets thread sizes: • 4-40 thru 3/8-16 • M4 thru M10
Sets thread sizes: • 4-40 thru 1/2-13 • M3 thru M12
Tooling
Features quick change nose piece for head set replacement without tools
Expendable Tool
AAT916
Special order materials available: brass & stainless. Minimums will apply.Clear protective coating on steel, aluminum & brass - tin plate material. Minimums will apply.
Tel: 800-325-3147 or 972-986-6792
33
riveT nUTs / Well nUTs / jaCK nUTs
flat headTHREAD
SIZEALUMINUM
PART #STEEL
PART #GRIP
RANGEHOLE SIZE
DRILL #A
±.015B
±.015C
NOM. D
+.000/-.004IL
REF
4-40 UNC080111000600801110008508011100100
080121000600801210008508012100100
.010-.060
.060-.085
.085-.100.155-.158
5/32.345.370.400
.270 .025 .155.230.230.230
6-32 UNC080111010750801110112008011101160
080121010750801210112008012101160
.010-.075
.075-.120
.120-.160.189-.192
#11.438.500.500
.325 .032 .189.300.315.270
8-32 UNC080111020750801110212008011102160
080121020750801210212008012102160
.010-.075
.075-.120
.120-.160.221-.224
#2.438.500.500
.357 .032 .221.300.315.270
10-24 UNC080111030800801110313008011103180
080121030800801210313008012103180
.010-.080
.080-.130
.130-.180.250-.253
1/4.531.594.641
.406 .038 .250.380.390.390
10-32 UNF080111040800801110413008011104180
080121040800801210413008012104180
.010-.080
.080-.130
.130-.180.250-.253
1/4.531.594.641
.406 .038 .250.380.390.390
1/4-20 UNC080111050800801110514008011105200
080121050800801210514008012105200
.020-.080
.080-.140
.140-.200.332-.335
Q.625.687.750
.475 .058 .332.450.450.450
5/16-18 UNC080111061250801110620008011106275
080121061250801210620008012106275
.030-.125
.125-.200
.200-.275.413-.416
Z.750.875.937
.665 .062 .413.505.555.540
3/8-16 UNC080111071150801110720008011107285
080121071150801210720008012107285
.030-.115
.115-.200
.200-.285.490-.49312.5mm
.844
.9381.031
.781 .088 .490.585.595.605
1/2-13 UNC080111081500801110825008011108350
080121081500801210825008012108350
.050-.150
.150-.250
.250-.350.625-.638
5/8.906
1.0311.141
.906 .085 .625.605.630.640
jack nuts
Jack Nut Friction WrenchPart # 0709075
Heavy-Duty Hand ToolPart # 07092400
installation Tooling:
AA480Double Action Lever ToolPart # 0202480
Sets: Steel 4-40 thru 10-32, M3 thru M5Aluminum 4-40 thru 5/16-18, M3 thru M8
325-RN/34604 Heavy Duty Thread Setter ToolPart # 5534604
Sets:Sizes 10-24 thru 3/8-16 & 5mm to 10mm in aluminum or steel
*Includes 1/4-20 mandrel & nosepiece
*Includes 1/4-20 mandrel & nosepiece
AA510 Plunger-Double Action Lever ToolPart # 0202510Sets: Steel 4-40 thru 5/16-18, M3 thru M8Aluminum 4-40 thru 3/8-16, M3 thru M10
# PART # SIZE BODY DIA. THREAD SIZE GRIP RANGE8S8L
070810810070810820 1/4 .438 1/4-20 .015-.187
.187-.375
The JACK NUT Threaded Insert is an economical blind fastener designed for use in thin, soft, or brittle materials. When tightened, the body collapses to form legs which grip the inside of the mounting surface, leaving a permanent, threaded insert.
*4S, 4L, 6S, and 6L also available.
MFG # BYLER PART # THREAD SIZE D HOLE SIZE GRIP RANGE L HH HD10S
J1032G1032Q1032H103210SL
0808220419208082204227108082204227080822042320808220445008082204643
10-32 .375 .375
.015-.192
.030-.227
.030-.227
.035-.232
.312-.450
.312-.643
.554
.700
.807
.665
.8471.051
.036
.080
.187
.040
.035
.051
.500
.750
.750
.562
.554
.5621/4S
D1420W1420J1420
JL1420
0808220511108082205187080822053420808220545708082205830
1/4-20 .500 .500
.015-.111.031-.187.197-.342.250-.457.625-.830
.630
.829
.8011.0511.432
.051
.187
.051
.051
.051
.630
.750
.635
.625
.635E51618 08082206151 5/16-18 .620 .625 .015-.156 .725 .125 .875Z3816 A3816
08082207125 080822074357 3/8-16 .750 .750 .015-.125
.015-.4371.050 1.062
.350
.1871.730 1.250
Well nuts
*Comes with 6/32, 10-24, & 1/4-20 mandrels
The WELL NUT is a rubber, flat head blind rivet nut that is installed when the mating screw is tightened. It is available in Chloroprene for standard applications and EDPM when exposed to sunlight and ultra violet rays. The internal threads are made of brass.
*Ask about Thread Setter Kit Part # 5534501 and Pneumatic Rivet Nut tools.
ALSO AVAILABLE:
Thin Sheet Nutserts provide an almost flush installation.Sizes: 6-32, 8-32, 10-24, & 10-32
Poly-Nuts are used for permanent threads in material too thin for tapped threads.
rivet nuts
Tel: 800-325-3147 or 972-986-6792
34
eleCTriCal ConneCTors
CONNECTOR TYPE STYLES TYPE PART GAUGE COLOR DESC. SEAM BYLER
PART #
SEALED CRIMP
& SOLDER
(Heat Shrink Connectors)
Butt Connectors Standard
10-12 AWG14-16 AWG18-20 AWG22-24 AWG
YellowBlueRed
Clear
----
SeamlessSeamlessSeamless
Butted
30510104305101433051018230510221
Step-Down Butt Connectors Step-Down
10-12 to 8 AWG14-16 to 10-12 AWG18-20 to 14-16 AWG22-24 to 18-20 AWG
PinkYellowBlueRed
----
SeamlessSeamlessSeamless
Butted
30515105305151443051518330515222
SEALEDSOLDER
(Heat Shrink Connectors)
Butt Connectors Standard
10-12 AWG14-16 AWG18-20 AWG22-24 AWG
YellowBlueRed
Clear
----
----
30410104304101433041018230410221
SEALED CRIMP
(Heat Shrink Connectors)
Butt Connectors
Brazed SeamlessSeamlessSeamless
Butted
8 AWG10-12 AWG14-16 AWG18-20 AWG22-24 AWG
PinkYellowBlueRed
Clear
Standard
Brazed SeamlessSeamlessSeamless
Butted
3031008530310104303101433031018230310221
Step-DownButt Connectors Seamless
10-12 to 8 AWG14-16 to 10-12 AWG18-20 to 14-16 AWG22-24 to 18-20 AWG
PinkYellowBlueRed
Tapered Seamless
30315105303151443031518330315222
Fully-Insulated Slip-On
ConnectorsButted
10-12 AWG10-12 AWG14-16 AWG14-16 AWG18-20 AWG18-20 AWG
YellowYellowBlueBlueRedRed
Male .250” TabFemale .250” Tab
Male .250” TabFemale .250” Tab
Male .250” TabFemale .250” Tab
Butted
303521041303521042303521431303521432303521821303521822
Ring Terminals Brazed 14-16 AWG Blue
3/8” Stud5/16” Stud1/4” Stud#10 Stud#8 Stud#6 Stud
Brazed
303211438330321143133032114253303211410330321140833032114063
FlangedSpade Terminals
Brazed 14-16 AWG Blue#6 Stud#8 Stud
#10 StudBrazed
303311406330331140833033114103
Brazed 10-12 AWG Yellow#6 Stud#8 Stud
#10 StudBrazed
303311006430331100843033110104
Butted 18-20 AWG Red#6 Stud#8 Stud
#10 StudButted
303311006230331100823033110102
Other Styles:Slip-On Connectors
Most common sizes listed. many others available!
Window Butt ConnectorsSpring Flanged Lug Terminals
Multi-Stud Terminals Bullet Receptacles
Bullet Plugs4-Way
Connectors3-Way
Connectors
SEALED, CRIMP & SOLDER
Sealed for maximum durability and soldered for superior strength and conductivity.
SEALED CRIMP
Sealed for maximum durability.
SEALED SOLDER
Sealed & soldered for mechanical reliability.
SEALED MULTIPLE WIRE
Joins two wires to one wire.Replaces 3-way connectors.
(Spring Spade and Standard Spade available)
Tel: 800-325-3147 or 972-986-6792
35
Ask your Byler Sales Representative for a complete list of sizes per kit
eleCTriCal ConneCTors
- Joins two wires to one wire- Replaces 3-Way Connectors and Quick Taps
CONNECTOR TYPE STYLE PART GAUGE TUBING
COLORCOLOR
STRIPE ON CONNECTORS
WIRE CRIMP DIE(INSULATED)
BYLER PART #
SEALED MULTIPLE WIRE CONNECTORS
IN-LINE BUTT
CONNECTORS
12-10 AWG
16-14 AWG
20-18 AWG
24-22 AWG
Clear / Yellow Dashes
Clear / Blue Dashes
Clear / Red Dashes
Clear / White Dashes
Side 1: YellowSide 2: Red
Side 1: BlueSide 2: Yellow
Side 1: RedSide 2: Blue
Side 1: WhiteSide 2: Red
One 12-10 AWGTwo 12-10 AWG
One 16-14 AWGTwo 16-14 AWG
One 20-18 AWGTwo 20-18 AWG
One 24-22 AWGTwo 24-22 AWG
Yellow (12-10 AWG)Red (8 AWG)
Blue (16-14 AWG)Yellow (12-10 AWG)
Red (20-18 AWG)Blue (16-14 AWG)
White (24-22 AWG)Red (20-16 AWG)
30710109
30710148
30710187
30710226
sealed heat shrink Tubing
sealed Multiple Wire Connectors
Heavy Wall (Shrink Ratio: 3 to 1)A sturdy, heavy wall tubing with excellent insulating, abrasion-resisting, & strain-relieving properties. The thermo-plastic adhesive provides superior environmental protection. • Battery splices and terminals • DIRECT BURIAL, UNDERWATER ENVIRONMENTS • Meets UL486D
Flexible Adhesive-Lined (Shrink Ratio: 3 to 1)A flame-retardant tubing (except clear) with an internal layer of thermo-plastic adhesive which provides a barrier against contaminants and corrosion. Protects automobile, marine and truck wire splices as well as harness breakouts.
Colors: Black, (Red - For Maintenance)Standard Cut Lengths: 6”, 12” & others availablePre-Shrink ID: .30”, .40”, .50” and up
Colors: Black, Clear, RedStandard Cut Lengths: 48”, 12”, 6”Pre-Shrink ID: 1/8”, 3/16”, 1/4”, 3/8”, 1/2”, 3/4”, 1”
SpecificationsDescription
Mini AssortmentPart # 30109002
Maintenance AssortmentsPart # 30101002
Sealed Crimp31 Items - 320 pcs
Part # 30101203
Sealed Crimp & Solder24 Items - 285 pcs
Part # 30101112
Sealed Solder30 Items - 259 pcs
Kits
ToolingT-R-15• Cuts, crimps and strips 26 to 10 gauge wire and crimps ignition terminals• Cuts and rethreads 4-40, 6-32, 8-32, 10-24 and 10-32 machine screws
multi-purpose Hand Tool
Ratchet ToolT-R-50• 4 crimp nests - 8, 10-12, 14-16, 18-22• Designed for insulated connectors
Part # 3001115
Part # 3001150
Self-Igniting Super Blaster TorchT-MTC-51B (Includes Butane)• Plastic canister torch• 2500ºF/1300ºC• 120 minutes of continuous use• Refillable / Windproof flame
Part # 3001251
Sealed Crimp3 Items - 60 pcs
Starter Kit
700, 800 & 850 Series
200 Series
Part # 301090021
Color dash on tubing indicates the wire gauge for the connector
Tubing has an active adhesive that seals between multiple wires
Color stripes on the connector indicate which crimp die to use
Tel: 800-325-3147 or 972-986-6792
36
adhesives/sealanTs
Sealing Vents/Roof Penetrations
Bonding Roof BowsSealing Windows and Door Frames
Bonding Sidewalls
Sealing Fenders
Vinyl & Rubber Flooring Adhesives
Seal Exterior Frame & Corner CapsBonding Roof Bows
Bonding Sidewalls
Seal Exterior/Interior Seams
Bonding FRP Wall Panels
Manus-bond®
Manus-Bond 76AM is self-leveling and exhibits excellent adhesion to many substrates including aluminum, brass, steel, glass, mortar, granite, marble, wood and many plastics.Benefits: Cures fast, even at low temperatures, highly weather resistant and paintable with most paints, contains no solvents or isocyanates, non-yellowing.
Color Part # Tensile Lap ShearAluminum Gray 03760002 175 psi 210 psi
Manus-Bond 75AM exhibits excellent adhesion to many substrates: aluminum, brass, steel, glass, mortar, granite, marble, wood, and many plastics. Benefits: Paintable, non-yellowing, and cures fast.
Color Part # Tensile Lap ShearWhite
Aluminum GrayBlack
Black 5 Gallon Bucket Penske Yellow
037500010375000203750003
03750003103750004
225 psi 275 psi
Manus-Bond 73-A is a one component room temperature curing silicone elastomeric adhesive/sealant. Does not require the addition of activators or catalysts. Specially designed for bonding and sealing a wide variety of structural materials such as glass, steel, aluminum and plastics and has exceptional resistance to weathering and temperature extremes.
Color Part # Tensile Lap ShearWhite 03730001 280 psi N/A
Manus-Bond 25AM is a fast cure, high strength adhesive/sealant. Adheres to aluminum, brass, steel, glass, mortar, concrete, wood and many plastics. Benefits: Highly weather resistant, paintable with most paints, contains no solvents or isocyanates, non-yellowing.
Color Part # Tensile Lap ShearWhite 03250001 475 psi 550 psi
Manus-Bond 64-A Polysul-Grip Tape is a 100% solid preformed synthetic polymer based adhesive/sealant tape which has excellent adhesion to aluminum, glass, galvanized steel and many other porous & non-porous surfaces. Benefits: Adhesion improves with age and remains permanently flexible, even at low temperatures, conforms with the performance requirements of AAMA 807.3-92, 806.1-92 and 804.1-92. Available in various widths and thicknesses in roll form.
Sizes Part # 1/16 Thick, 1/2 Wide
1/8 Thick, 5/8 Wide, 65’ Roll1/8 Thick, 3/4 Wide, 60’ Long1/8 Thick, 1” Wide, 65’ Long 1/8 Thick, 3” Wide, 30’ Long
0364000003640001
036400412036400416036400448
Manus-Bond 65-A is a one component adhesive/sealant with exceptional strength, durability, flexibility, and adhesion characteristics without priming. Ideal for permanent weathertight bonding and sealing of wood, metal, fiberglass, and plastics. Benefit: No priming.
Color Part # Tensile Lap ShearWhiteGreyBeige
036500010365000203650005
N/A ≈ 175 psi
Manus Prene 65-H is a one-component neoprene sealer which demonstrates excellent adhesion, weather resistance and sealing properties to concrete, mortar, aluminum, wood and many plastics. Will dry quickly to form a tough durable seal and retain its flexibility for years. Used for trailer, trucks and truck bodies.
Color Part # White 03651001
Manus-Bond® products available in a variety of packaging:• Standard case = 24 tubes per case• 10.3 fl. oz. cartridges• 10.3 oz. & 20 oz. sausage packs*• 1, 3, 5, & 55 gallon containers
packaging:
*20 oz. sausage packs = Part # 0375000120
#1seller
Storage life on most adhesives/sealants is 6 months.
Industrial grade
Tel: 800-325-3147 or 972-986-6792
37
#1seller
Silaprene® products are available in a variety of packaging:• Standard case = 24 tubes per case• 10.1 oz. cartridges• 10 oz. & 20 oz. sausages• 5 gallon pails• 55 gallon drums• 110 & 275 gallon totes
packaging:
adhesives/sealanTs
silaprene®
North America’s Premier Adhesive/Sealant is the premier product when bond strength is required in an Adhesive/Sealant. Remains resilient and grows stronger with age. Outstanding resistance to UV, heat, cold, moisture, oils, gasoline and highway chemicals. Available in a range of viscosities and colors. Paintable.
Color Part # Premier Super White
Premier GreyAluminum
Black
038700011038700020387000303870004
Silaprene HAPs Free Sealant are available for those manufacturers with operations that want the quick curing of solvent based sealants but want to avoid the reporting of Hazardous Air Pollutants. It is available in clear and colored versions that have good finger-tooling properties.*Equivalent to: Chemrex Pro-2000* which contains HAP’s
Color Part #White 03812381
Silaprene Solid Bond is a one-part urethane adhesive/sealant that provides flexibility and high strength. Solid Bond can be used to replace rivets, welds and other fasteners in applications such as sidewall and roof bow bonding.
Color Part # WhiteGray Black
Black Polyurethane AdhesiveBonding Adhesive
03860001 0386000203860003
038600038-
Silaprene Transportation Adhesive/Sealant is a flexible product that provides good adhesion and an excellent seal in applications that do not require the high strength priorities of North America’s Premier Adhesive/Sealant. Maintains joint integrity while absorbing shock and vibration. *On skin to frame applications solid bond should be used with SB100 Primer.
Color Part # White 03890001
Silaprene Solid Seal is a one component polyurethane product that cures to form a permanently flexible seal on a wide variety of materials. Solid seal provides excellent adhesion on many bonding jobs such as adhering trim pieces and bonding interior plywood to wood, steel, and aluminum frames and walls.
Color Part # WhiteGray
0385000103850002
Sealing Vents/Roof Penetrations
Bonding Roof Bows
Sealing Windows and Door Frames
Vinyl and Rubber Flooring Adhesives
Transportation Applications:• Bonding FRP wall panels• Bonding headliners• Bonding door panels• Bonding floor mats• Bonding roof bows• Bonding sidewalls• Bonding trim pieces• Sealing exterior frame and corner caps• Sealing exterior/interior seams• Sealing vents/roof penetrations• Sealing windows and door frames
Bonding Roof Bows
Bonding Headliners
Bonding Interior Wall Panels
Sealing Windows and Door Frames
Bonding Sidewalls
Vinyl & Rubber Flooring Adhesives
Sealing Fenders
Bonding Sidewall InsulationLaminating HPL Cabinet Surfaces
Tel: 800-325-3147 or 972-986-6792
38
MaGna-Grip®
Button Head - MGPB
Truss Head - MGPTBroad Truss Head - MGP30 90º Flush Head - MGP90
MGP98T “Paccar” Head
* “d” dimension is not applicable to short grip CSK parts.
TYPE OFRIVET DIA. MFG.
PART NO.BYLER
PART NO.GRIP
RANGE RIVET DIMENSIONS MIN. VALUES IN LBS.
A B C D a-ref d-ref SHEAR TENSILE
BUTTON HEAD
Aluminum
3/16 MGPB-E6-10 430114090610 .062-.625 .183-.187 .356-.394 .113-.125 1.788 .191-.195 .114 750 9001/4 MGPB-E8-10 430114090810 .062-.625 .245-.249 .475-.525 .136-.152 1.965 .250-.259 .125 1200 16205/16 MGPB-E10-12 430114091012 .125-.750 .307-.311 .594-.656 .181-.201 2.34 .274-.283 .250 2200 25003/8 MGPB-E12-14 430114091214 .125-.875 .369-.375 .713-.787 .223-.248 2.875 .380-.385 .188 3000 4000
MGP98T HEAD
Aluminum3/16 MGP98T-E6-10
MGP98T-E6-20430114040610430114040620
.062-.625
.312-1.25 .183-.187 .450-.488 .091-.105 1.7882.37 .191-.195 .114
.312 750 900
TRUSS HEAD
Aluminum1/4 MGPT-E8-10
MGPT-E8-20430114020810430114020820
.062-.625
.312-1.25 .245-.249 .531-.594 .103-.115 1.9652.56 .250-.259 .125
.312 1200 1620
90° CSKAluminum
3/16 MGP90-E6-10 430114070610 .062-.625 .183-.187 .323-.359 .092-.102 1.788 .191-.195 * 750 9001/4 MGP90-E8-10 430114070810 .062-.625 .245-.249 .433-.478 .119-.128 1.965 .217-.226 * 1200 1620
BROAD TRUSS
Aluminum3/8 MGP30-E12-24 430114031224 .625-1.50 .245-.249 .698-.802 .119-.149 3.375 .380-.385 .680 3000 4000
BUTTON HEADSteel
3/16 MGPB-R6-10G MGPB-R6-20G
43012009061014301200906201
.062-.625
.312-1.25 .183-.187 .356-.394 .113-.125 1.7882.73 .191-.195 .114
.312 1725 1400
1/4 MGPB-R8-10G MGPB-R8-20G
43012009081014301200908201
.062-.625
.312-1.25 .245-.249 .475-.525 .136-.152 1.9652.56 .250-.259 .125
.312 2200 2550
5/16 MGPB-R10-12G MGPB-R10-22G
43012009101214301200910221
.125-.750.625-1.375 .307-.311 .594-.656 .181-.201 2.34
2.84 .274-.283 .250.550 3000 3910
3/8 MGPB-R12-14G MGPB-R12-26G
43012009121414301200912261
.125-.875.812-1.625 .369-.375 .713-.787 .223-.248 2.875
3.5 .380-.385 .188.810 4200 5625
MGP98T HEADSteel
3/16 MGP98T-R6-10G MGP98T-R6-20G
43012004061014301200406201
.062-.625
.312-1.25 .183-.187 .450-.488 .091-.105 1.8012.383
.191-.195
.183-.187.087.312 1725 1400
TRUSS HEADSteel
1/4 MGPT-R8-10G MGPT-R8-20G
43012002081014301200208201
.062-.625
.312-1.25 .245-.249 .542-.582 .103-.115 1.9652.56 .250-.259 .114
.312 2200 2550
5/16 MGPT-R10-12G 4301200210121 .125-.750 .307-.311 .703-.797 .127-.141 2.34 .274-.283 .265 3000 39103/8 MGPT-R12-14G 4301200212141 .125-.875 .369-.375 .828-.922 .152-.168 2.875 .380-.385 .188 4200 5625
90° CSKSteel
3/16 MGP90-R6-10G 4301200706101 .062-.625 .183-.187 .323-.359 .092-.102 1.788 .191-.195 * 1725 1400
1/4 MGP90-R8-10G MGP90-R8-20G
43012007081014301200708201
.062-.625.312-1.255 .245-.249 .433-.478 .119-.128
.102-.1151.9652.56
.217-.226
.275-.280 .204 2200 2550
BROAD TRUSSSteel
1/4 MGP30-R8-10G MGP30-R8-24G
43012003081014301200308241
.156-.625.625-1.500 .245-.249 .937 .138-.162 1.965
2.81 .250-.259 .125.562 2200 2550
3/8 MGP30-R12-24G MGP30-R12-32G
43012003122414301200312321
.625-1.5001.125-2.00 .369-.375 1.188-1.25 .188-.212 3.375
3.875 .380-.385 .6801.18 4200 5625
HOLE SIZE
DIA. MAX HOLE SIZE
DRILLSIZE DIA. MAX HOLE
SIZEDRILLSIZE
3/161/4
.203
.26513/6417/64
5/163/8
.328
.39021/6425/64
Tel: 800-325-3147 or 972-986-6792
39
We Repair HUCK® Tooling
in House!
1/4", 5/16" and 3/8" DIA.MODEL #256 MODEL #2580
installation Tools for MaGna-Grip®
MaGna-Grip® Collars
Standard Flange MGC Medium Flange MGCS Wide Flange MGCW
3/16" and 1/4" DIA.MODEL #2025 MODEL #2480
DIA.Nose Assembly
2025 2480
3/16" 592991456 592993201
1/4" 592991458 592993204
DIA.Nose Assembly
256 25801/4" 5929932075/16" 592991439 3/8" 592991440
TYPE OF COLLAR DIA. MFG PART # BYLER
PART #
COLLAR DIMENSIONS
F G H J K
MGCSTANDARDAluminum
3/161/4
5/163/8
MGC-F6MGC-F8
MGC-F10MGC-F12
4301912106430191210843019121104301912112
.305-.315
.395-.405
.500-.510
.602-.612
.194-.204
.250-.260
.312-.320
.375-.385
.267-.283
.367-.383
.428-.448
.495-.515
.050
.062
.075
.093
.360-.390
.485-.515
.605-.645
.730-.770MGCW
WIDE FLANGEAluminum
3/16 MGCW-F6 4301912406 .305-.315 .194-.204 .290-.320 .100 .635-.760
MGCSTANDARD
Steel
3/161/4
5/163/8
MGC-R6UMGC-R8U
MGC-R10UMGC-R12U
43019202061430192020814301920210143019202121
.305-.315
.395-.405
.500-.510
.602-.612
.187-.197
.250-.260
.312-.320
.375-.385
.267-.299
.367-.383
.428-.448
.495-.515
.050
.062
.075
.093
.360-.390
.485-.515
.605-.645
.730-.770MGCS
MEDIUM FLANGESteel
3/16 MGCS-R6U 43019203061 .305-.315 .187-.197 .297-.330 .100 .490-.540
MGCWWIDE FLANGE
Steel3/161/4
MGCW-R6UMGCW-R8U
4301920406143019204081
.305-.315
.395-.405.187-.197.250-.260
.290-.378
.427-.467.100.130
.635-.760.850-1.010
MGCSTANDARD
Cadmium Plated
3/161/4
5/163/8
MGC-R6CMGC-R8C
MGC-R10CMGC -R12C
4301920262430192020824301920210243019202122
.305-.315
.395-.405
.500-.510
.602-.612
*.250-.260.312-.320.375-.385
.267-.283
.367-.383
.428-.448
.495-.515
.050
.062
.075
.093
.360-.390
.485-.515
.605-.645
.730-.770U = Zinc Chromate Gold; F = 6061 Aluminum; C = Cadmium Plated
*Nose Assembly Sold Separately. See also the Huck Tool pages 60-62
HYDRAULICPNEUDRAULIC HYDRAULICPNEUDRAULIC
Tel: 800-325-3147 or 972-986-6792
40
MaXloK®
1903 - Paccar Head 1901 - Button Head 1905 - Truss HeadMAXLOK STEEL PINS
TYPE OFRIVET DIA MFG
PART#BYLERPART #
GRIPRANGE
VALUES IN LBS. DIMENSIONSSHEAR TENSILE B C D
BUTTONHEADSTEEL
3/16 01901-7061001901-70620
11190106101119010620
.062-.625.312-1.250 1855 2250 .395 .126 1.875
2.500
1/4 01901-7081001901-70820
11190108101119010820
.062-.363.312-1.250 2650 3600 .525 .153 2.050
2.690
PACCAR HEADSTEEL
3/16 01903-7061001903-70620
11190306101119030620
.062-.625.312-1.250 1855 2250 .491 .111 1.875
2.500
1/4 01903-7081001903-70820
11190308101119030820
.062-.363.312-1.250 2650 3600 .657 .126 2.050
2.690
TRUSS HEADSTEEL
3/16 01905-7061001905-70620
11190506101119050620
.062-.625.312-1.250 1855 2250 .470 .111 1.875
2.500
1/4 01905-7081001905-70820
11190508101119050820
.062-.363.312-1.250 2650 3600 .595 .121 2.050
2.690
Avdel nG4Tooling
Collars
PULL FORCE WEIGHT STROKE4200 lbs. 3.6 lbs. .750 in.
• nG4 is designed to provide a single tool which replaces those products currently requiring 3 tools.
Compatible Fasteners:1/8" through 1/4" non-structural and structural blind rivets in all alloys. 3/16" & 1/4" Maxloks
The nG4 Pulls:• Maxloks®
• Hemloks®
• Monobolts®
Steel Countersunk Headstyle (1902) and Aluminum Brazier Headstyle (1921) & collars are available.
TYPE DIA MFGPART#
BYLERPART #
DIMENSIONSG H K
SMALL FLANGE 1981
STEEL
3/16 01981-70600 11198106 .187-.197 .267-.299 .360-.390
1/4 01981-70800 11198108 .250-.260 .367-.383 .485-.515
MEDIUM FLANGE1971
STEEL3/16 01971-70600 11197106 .187-.197 .297-.330 .490-.540
WIDE FLANGE1991
STEEL3/16 01991-70600 11199106 .187-.197 .290-.378 .635-.760
FOR RENT!
1981 - Small 1991 - Wide1971 - Medium
Flange Collar
• Interlocks®
• Avex®
• Stavex®
Acceptable Fractures
Unacceptable Fractures
Tel: 800-325-3147 or 972-986-6792
41
avdeloKs®
TYPE OFRIVET DIA MFG. PART # BYLER
PART #GRIP RANGE
MIN-MAX
BRAZIER HEADAluminum
02801
3/16
02801-0060202801-0060302801-0060402801-0060502801-0060602801-0060702801-0060802801-00609
11280106021128010603112801060411280106051128010606112801060711280106081128010609
.062-.187
.125-.250
.187-.312
.250-.375
.312-.437
.375-.500
.437-.562
.500-.625
1/4
02801-0080202801-0080302801-0080402801-0080502801-0080602801-0080702801-0080802801-00809
11280108021128010803112801080411280108051128010806112801080711280108081128010809
.062-.187
.125-.250
.187-.312
.250-.375
.312-.437
.375-.500
.437-.562
.500-.625
5/1602801-0100402801-0100602801-01008
112801100411280110061128011008
.125-.375
.250-.500
.375-.625
3/8
02801-0120402801-0120602801-0120802801-0121002801-01212
11280112041128011206112801120811280112101128011212
.125-.375
.250-.500
.375-.625
.500-.750
.625-.875
BRAZIER HEADSteel02621
3/1602621-7060202621-7060302621-7060402621-70605
1126210602112621060311262106041126210605
.062-.187
.125-.250
.187-.312
.250-.375
1/4
02621-7080202621-7080302621-7080402621-7080502621-7080602621-7080702621-7080802621-70809
11262108021126210803112621080411262108051126210806112621080711262108081126210809
.062-.187
.125-.250
.187-.312
.250-.375
.312-.437
.375-.500
.437-.562
.500-.625
5/1602621-7100402621-7100602621-71008
112621100411262110061126211008
.125-.375
.250-.500
.375-.625
3/802621-7120402621-7120602621-71208
112621120411262112061126211208
.125-.375
.250-.500
.375-.625
DIA. HOLESIZE
MAX DIMENSIONS VALUES IN LBS.B C SHEAR TENSILE
3/16 .203 .395 .132 AL: 1050ST: 1940
AL: 1060ST: 1650
1/4 .266 .526 .161 AL: 1875ST: 3310
AL: 1780ST: 3000
5/16 .328 .657 .214 AL: 2925ST: 5030
AL: 2850ST: 4900
3/8 .391 .788 .262 AL: 4200ST: 7210
AL: 4200ST: 6500
Brazier Head02801 / 02621 / 02691
Truss Head02803 / 02624
Brazier Head - 02801 / 02621 Dimensions
Avdel has steel Avdeloks in 1/2”, 5/8”, 3/4”, 7/8” and 1” diameters. The pins are carbon steel (black) and the collars are zinc plated steel.
CALL FOR ADDITIONAL INFORMATION!
AVDELOK LD (Large Diameter)
Standard02666 / 02662
02837
AVDELOK COLLARS
Flanged02659 / 02615
02839
90º Countersunk Head02802 / 02622
TYPE OFCOLLAR DIA. MFG.
PART #BYLER PART #
STANDARDAluminum
02666
3/161/4
5/163/8
02837-0060002837-0080002837-0100002837-01200
11266606112666081126661011266612
FLANGEDAluminum
02659
3/161/4
5/163/8
02839-0060002839-0080002839-0100002839-01200
11280906112809081128091011280912
STANDARDSteel02662
3/161/4
5/163/8
02662-7060002662-7080002662-7100002662-71200
11266206112662081126621011266212
FLANGEDSteel02615
3/161/4
5/163/8
02615-7060002615-7080002615-7100002615-71200
11261506112615081126151011261512
TYPE OFCOLLAR
COLLAR DIMENSIONSF G H J K
STANDARD.187-.196.256-.265.304-.312.375-.385
.304-.311
.402-.409
.485-.494
.590-.600
.220-.260
.290-.320
.350-.380
.430-.460
N/AN/AN/AN/A
N/AN/AN/AN/A
FLANGED.187-.196.256-.265.304-.312.378-.390
.304-.311
.402-.409
.498-.507
.599-.610
.250-.280
.349-.379
.394-.426
.502-.532
.031-.062
.047-.078
.062-.094
.062-.125
.391-.359
.484-.516
.609-.641
.719-.781
Stainless steel and other grip ranges available. Minimums may apply. When using 2659/2615 collars, add flanged “J” dimension to thickness of material being fastened to determine grip number.
MAXLOK STEEL PINSTYPE OF
RIVET DIA MFGPART#
BYLERPART #
GRIPRANGE
VALUES IN LBS. DIMENSIONSSHEAR TENSILE B C D
BUTTONHEADSTEEL
3/16 01901-7061001901-70620
11190106101119010620
.062-.625.312-1.250 1855 2250 .395 .126 1.875
2.500
1/4 01901-7081001901-70820
11190108101119010820
.062-.363.312-1.250 2650 3600 .525 .153 2.050
2.690
PACCAR HEADSTEEL
3/16 01903-7061001903-70620
11190306101119030620
.062-.625.312-1.250 1855 2250 .491 .111 1.875
2.500
1/4 01903-7081001903-70820
11190308101119030820
.062-.363.312-1.250 2650 3600 .657 .126 2.050
2.690
TRUSS HEADSTEEL
3/16 01905-7061001905-70620
11190506101119050620
.062-.625.312-1.250 1855 2250 .470 .111 1.875
2.500
1/4 01905-7081001905-70820
11190508101119050820
.062-.363.312-1.250 2650 3600 .595 .121 2.050
2.690
Tel: 800-325-3147 or 972-986-6792
42
C6l®/C120® “hUCK” bolTs
Brazier Head - C6LB Truss Head - C6LT
Contact Byler Rivet for C6L & C6L90 fasteners not published.
C120 - Grade 5 Pins & Collars availableMinimums may apply.
TYPE OFRIVET DIA. MFG
PART # BYLER PART # GRIPRANGE
RIVET DIMENSIONS MIN. VALUES IN LBS.A B C D E SHEAR TENSILE
BRAZIER HEADAluminum 3/8
C6LB-C12-6 C6LB-C12-8
C6LB-C12-10 C6LB-C12-12
420111011206420111011208420111011210420111011212
.250-.500
.375-.625
.500-.750
.625-.875.380-.385 .713-.787 .223-.248
0.9341.0591.1841.309
2.2502.3752.5002.625
4200 4200
BRAZIER HEADSteel
1/4
C6LB-R8-4G C6LB-R8-5G C6LB-R8-6G C6LB-R8-8G
C6LB-R8-10G C6LB-R8-12G
420120010804142012001080514201200108061420120010808142012001081014201200108121
.188-.313
.250-.375
.313-.438
.438-.563
.563-.688
.688-.813
.254-.259 .475-.525 .136-.152
0.6100.6730.7350.8600.9851.110
1.6451.7081.7701.8952.0202.145
3050 3000
5/16 C6LB-R10-6G C6LB-R10-8G
42012001100614201200110081
.250-.500
.375-.625 .317-.322 .595-.656 .181-.201 0.8741.000
2.0352.156 4725 4600
3/8
C6LB-R12-4G C6LB-R12-6G C6LB-R12-8G
C6LB-R12-10G C6LB-R12-12G
42012001120414201200112061420120011208142012001121014201200112121
.125-.375
.250-.500
.375-.625
.500-.750
.625-.875
.380-.385 .713-.787 .223-.248
0.8090.9341.0591.1841.309
2.1212.2462.3712.4962.621
6825 6500
BRAZIER HEADStainless Steel
3/16 C6LB-U6-4 C6LB-U6-5 C6LB-U6-6
420130010604042013001060504201300106060
.188-.313
.250-.375
.313-.438.191-.195 .356-.394 .078-.088
0.5190.5820.644
1.5291.5911.654
2000 1455
1/4 C6LB-U8-4 C6LB-U8-6 C6LB-U8-8
420130010804042013001080604201300108080
.188-.313
.313-.438
.438-.563.254-.259 .475-.525 .136-.152
0.6100.7350.860
1.6451.7701.895
3550 2750
3/8 C6LB-U12-6 C6LB-U12-8
C6LB-U12-10
420130011206042013001120804201300112100
.250-.500
.375-.625
.500-.750.380-.385 .713-.787 .223-.248
0.9341.0591.184
2.2462.3712.496
7950 6100
TRUSS HEADStainless Steel 3/8
C6LT-U12-4 C6LT-U12-6 C6LT-U12-8C6LT-U12-10C6LT-U12-12
42013002120414201300212061420130021208142013002121014201300212121
.125-.375
.250-.500
.375-.625
.500-.750
.625-.875
.380-.385 .828-.922 .186-.202
0.8090.9341.0591.1841.184
2.1212.2462.3712.4962.496
7950 6100
C98LT HEADStainless Steel Bright Polished
3/16
C98LT-U6-3BR C98LT-U6-5BR C98LT-U6-7BR C98LT-U6-9BR C98LT-U6-11BR C98LT-U6-12BR
420130180603420130180605420130180607420130180609420130180611420130180612
.125-.250
.250-.375
.375-.500
.500-.625
.625-.750
.688-.813
.191-.195 .406-.469 .078-.088
0.4570.5820.7070.8320.9571.019
1.4661.5291.7161.8411.9662.029
2000 1455
TRUSS HEADStainless Steel Cap
Steel Body
1/4C6LTC-R8-6C6LTC-R8-8
C6LTC-R8-10C6LTC-R8-12
4201200308063420120030808342012003081034201200308123
.313-.438
.438-.563
.563-.688
.688-.813.254-.259 .610 max .165 max
0.7350.8600.9851.110
1.7701.8952.0202.145
3050 3000
3/8
C6LTC-R12-6C6LTC-R12-8
C6LTC-R12-10C6LTC-R12-12C6LTC-R12-14
42012003120634201200312083420120031210342012003121234201200312143
.250-.500
.375-.625
.500-.750
.625-.875
.750-1.00
.380-.385 .828-.922 .152-.168
0.9341.0591.1841.3091.434
2.2462.3712.4962.6212.746
6825 6500
Flush Head - C6L90
WE REPAIR“hUCK” TOOLS!
DIA. MAX HOLE DRILL SIZE3/161/4
5/163/8
.219
.281
.359
.422
13/64 = 1668701017/64 = 1668705011/32 = 1668710025/64 = 16687130
Tel: 800-325-3147 or 972-986-6792
43
3/16" and 1/4" DIA.MODEL #2025 MODEL #2480
5/16" and 3/8" DIA.MODEL #256 MODEL #2580
C6l®/C120® Collars
TYPE OFCOLLAR DIA. MFG
PART # BYLER PART #COLLAR DIMENSIONS
F G H
2LCSTANDARDAluminum
3/161/4
5/163/8
2LC-F62LC-F8
2LC-F102LC-F12
42019133206420191332084201913321042019133212
.187-.196
.256-.265
.304-.310
.375-.385
.311-.304
.409-.402
.485-.494
.590-.600
.218-.248
.290-.320
.350-.380.430-460
2LCSTANDARD
Steel
3/161/4
5/163/8
2LC-R6G2LC-R8G
2LC-R10G2LC-R12G
42019202061420192020814201920210142019202121
.187-.196
.256-.265
.304-.310
.375-.385
.311-.304
.409-.402
.485-.494
.590-.600
.218-.248
.290-.320
.350-.380
.430-.460
2LCSTANDARD
Stainless Steel
3/161/4
5/163/8
2LC-2CU62LC-2CU8
2LC-2CU102LC-2CU12
42019302062420193020824201930210242019302122
.187-.196
.256-.265
.304-.310
.375-.385
.311-.304
.409-.402
.485-.494
.590-.600
.218-.248
.290-.320.350-380.430-.460
LC/2LC 8LC3LC
installation Tools for C6l®/C120®
DIA. Nose Assembly DIA. Nose Assembly3/16" 592993003 5/16" 59299992451/4" 592993006 3/8" 59299100245
* 256 Tool will pull 3/16” and 1/4” C6L/C120’s, but requires reducing adapter #593102463.* Nose Assembly sold separately.
• When using 3LC collars, add “J” dimensions to thickness of material being fastened to determine grip number. *Wide Flange 3/16" and 1/4" collars available in steel and stainless steel. Minimums may apply
Model 940 Hydraulic POWERIG®
• Portable production and repair• .3 gpm• Electrically powered; 115 or• 220 volts, single phase• Weighs 75 lbs• 12.5”L x 10.5”W x 18”HPart # 591940
TYPE OFCOLLAR DIA. MFG
PART # BYLER PART #COLLAR DIMENSIONS
F G H J K3LC
FLANGEAluminum
1/45/163/8
3LC-F83LC-F103LC-F12
420191333084201913331042019133312
.256-.267
.304-.312
.378-.390
.409-.402
.498-.507
.599-.610
.349-.379
.394-.426
.502-.532
.047-.078
.062-.094
.062-.125
.484-.516
.609-.641
.719-.781
3LCFLANGE
Steel
3/161/4
5/163/8
3LC-2R6G3LC-2R8G
3LC-2R10G3LC-2R12G
42019203061420192030814201920310142019203121
.187-.196
.256-.267
.304-.312
.378-.390
.304-.311
.409-.402
.498-.507
.599-.610
.250-.280
.349-.379
.394-.426
.502-.532
.031-.062
.047-.078
.062-.094
.062-.125
.359-.391
.484-.516
.609-.641
.719-.781
3LCFLANGE
Stainless Steel
3/161/4
5/163/8
3LC-2CU63LC-2CU8
3LC-2CU103LC-2CU12
42019303062420193030824201930310242019303122
.187-.196
.256-.267
.304-.312
.378-.390
.304-.311
.409-.402
.498-.507
.599-.610
.250-.280
.349-.379
.394-.426
.502-.532
.031-.062
.047-.078
.062-.094
.062-.125
.359-.391
.484-.516
.609-.641
.719-.781
Tel: 800-325-3147 or 972-986-6792
44
bobTail®
The BOBTAIL® Huckbolt combined with its rugged installation tools offers a complete system that delivers superior value and performance.Proven Performance • High, consistent clamp load • Vibration proof • High fatigue endurance, high shear and tensile loadsGrade 8 - Metric
TYPE MFG PART # BYLER PART # GRIP RANGE*(MIN - MAX)
AMAX B C D
MAXE
MAXMAX
HOLEMIN VALUES IN LBS.
SHEAR CLAMP TENSILE
FLANGED HEAD 12mm
Steel
MBT-DT12-10MBT-DT12-15MBT-DT12-20MBT-DT12-25MBT-DT12-30MBT-DT12-35MBT-DT12-40
461023011210461023011215461023011220461023011225461023011230461023011235461023011240
5-15mm10-20mm15-25mm20-3mm
25-35mm30-40mm35-45mm
12.0 24.1-25.4 8.9-9.6
3.83.83.83.83.83.83.8
34.239.244.249.254.259.264.2
13.5mm 14,700 14,600 19,700
FLANGED HEAD 14mm
Steel
MBT-DT14-10MBT-DT14-15MBT-DT14-20MBT-DT14-25MBT-DT14-30MBT-DT14-35MBT-DT14-40
461023011410461023011415461023011420461023011425461023011430461023011435461023011440
5-15mm10-20mm15-25mm20-30mm25-35mm30-40mm35-45mm
14.0 30.0 MAX 11.5 MAX
3.83.83.83.83.83.83.8
37.142.147.152.157.162.167.1
15.5mm 21,100 19,500 27,000
FLANGED HEAD 16mm
Steel
MBT-DT16-10MBT-DT16-15MBT-DT16-20MBT-DT16-25MBT-DT16-30MBT-DT16-35MBT-DT16-40
461023011610461023011615461023011620461023011625461023011630461023011635461023011640
5-15mm10-20mm15-25mm20-30mm25-35mm30-40mm35-45mm
16.0 32.3-33.8 11.4-12.2
3.83.83.83.83.83.83.8
40.145.150.155.160.165.170.1
17.5mm 26,000 26,000 36,600
FLANGED HEAD 20mm
Steel
MBT-DT20-10MBT-DT20-15MBT-DT20-20MBT-DT20-25MBT-DT20-30MBT-DT20-35MBT-DT20-40
461023012010461023012015461023012020461023012025461023012030461023012035461023012040
5-15mm10-20mm15-25mm20-30mm25-35mm30-40mm35-45mm
20.0 40.3-42.4 15.0-16.0
3.83.83.83.83.83.83.8
45.950.955.160.965.970.975.9
22mm 41,000 40,700 57,300
CollarCOLLAR STYLE DIA. MFG PART # BYLER PART #
COLLAR DIMENSIONSF G H J
STEEL12mm14mm16mm20mm
MBTC-R16BLMBTC-R20BLMBTC-R24BLMBTC-R28BL
46119032161461190322014611903224146119032281
24.1-25.428.2-29.632.3-33.840.3-42.1
17.3-17.720.5-21.023.1-23.729.0-29.6
18.3-18.521.1-21.524.1-24.530.2-30.6
12.1-12.314.0-14.416.0-16.420.1-20.5
ToolingTOOL
12mm 14mm 16mm 20mmNOSE CUTTER NOSE CUTTER NOSE CUTTER NOSE CUTTER
2628 - - - - 99-7831 99-7831CC 99-7822 99-782CCBTT35LS 99-7820 99-7820CC 99-7824 99-7824CC 99-7821 99-7821CC - -SFBTT20 99-7880 99-7880CC 99-7884 99-7884CC 99-7881 99-7881CC - -
BTT57 - - - - - - 99-7852 99-7852CC
*Grip ranges in mm. Other sizes available.
BTT35LS
Tel: 800-325-3147 or 972-986-6792
45
MODEL 918 Hydraulic POWERIG®
• High-production applications• Operates up to 2 tools; 2 gpm flow rate• Electricity powered; 220, 440, or 550 volts, 3 phase• Weighs 708 lbs, operational 44”L x 25”W x 30”H
MODEL 940 Hydraulic POWERIG®
• Portable production and repair• .3 GPM• Electrically powered; 115 or 220 volts, single phase• Weighs 75 lbs• 12.5”L x 10.5”W x 18”H
hp8®
fastener dimensionsTYPE MFG PART # BYLER PART #
RIVET DIMENSIONSA B C D
1/2” ROUND HEAD (DT16)
All Steel
HP8F-DT16-8HP8F-DT16-12HP8F-DT16-16HP8F-DT16-20
***
440140101608440140101612440140101616440140101620
***
1.6251.8752.1252.375***
3.5503.8004.0504.300***
.307 1.070
5/8” ROUND HEAD (DT20)
All Steel
HP8F-DT20-4HP8F-DT20-6HP8F-DT20-8
HP8F-DT20-12HP8F-DT20-16HP8F-DT20-20HP8F-DT20-28HP8F-DT20-36HP8F-DT20-44
***
440140102004440140102006 440140102008440140102012440140102016440140102020440140102028440140102036440140102044
***
--
1.8202.0702.3202.5703.0703.5704.070***
--
4.0384.2884.5384.7885.2885.7886.288***
.498 1.330
3/4” ROUND HEAD (DT24)
All Steel
HP8F-DT24-8HP8F-DT24-12HP8F-DT24-16HP8F-DT24-20HP8F-DT24-28HP8F-DT24-36
***
440140102408440140102412440140102416440140102420440140102428440140102436
***
2.0002.2502.5002.7503.2503.750***
4.6404.8905.1405.3905.8906.390***
.600 1.590
The HP8®, provides an easy-to-use system thatdelivers a permanent, vibration resistant clamp.These fasteners, available in diameters rangingfrom 1/2” to 3/4”, offer fast, tamper-resistantinstallation, with only a visual inspectionrequired.
ROUND HEAD PIN
GRIP DATA 1/2”, 5/8”, 3/4”
GRIP NO.
GRIP RANGE
8 .250-.75012 .500-1.00016 .750-1.25020 1.00-1.5028 1.50-2.0036 2.00-2.5044 2.50-3.0052 3.00-3.5060 3.50-4.00
DIA. MFGPART # BYLER PART #
COLLAR DIMENSIONS
E G H I1/2”5/8”3/4”
HPCF-R16UHPCF-R20UHPCF-R24U
440192010161440192010201440192010241
1.0851.3581.600
.750
.9221.107
.8121.0091.213
.519
.645
.780
hp8 Tooling5/8” DIA.
MODEL # 2624
NOSE ASSEMBLY592995301
1/2” DIA.MODEL # 2620 / 2620PT
NOSE ASSEMBLY592995307
592995300 = Pass Thru
5/8” & 3/4” DIA.MODEL # 2628
NOSE ASSEMBLY5/8” = 5929953013/4” = 592995303
Collars*Longer lengths available. Minimums may apply.
PT = Pass Thru
• Heavy duty two piece fastener with a wide grip range
• High resistance to vibratory loosening
• Visual inspection to confirm joint integrity
• Meets strength performance of grade 8
benefits:
Grade 8 fastener
Part # 591940
Part # 591918
Tel: 800-325-3147 or 972-986-6792
46
hUCK-spin®
dimensions - inchesSIZE MFG PART # BYLER
PART #DIMENSIONS
B C1/2”
ROUND HEAD (DT16)D = 1.07Steel
HSP8-DT16-08HSP8-DT16-10HSP8-DT16-12HSP8-DT16-16HSP8-DT16-20
460140101608460140101610460140101612460140101616460140101620
1.9652.0902.2152.4652.715
.397
5/8” ROUND HEAD (DT20)D = 1.33Steel
HSP8-DT20-04HSP8-DT20-06HSP8-DT20-08HSP8-DT20-10HSP8-DT20-12HSP8-DT20-16HSP8-DT20-20HSP8-DT20-24HSP8-DT20-28HSP8-DT20-32HSP8-DT20-36HSP8-DT20-44
460140102004460140102006460140102008460140102010460140102012460140102016460140102020460140102024460140102028460140102032460140102036460140102044
2.0052.1302.2552.3802.5052.7553.0053.2553.5053.7554.005
-
.498
3/4” ROUND HEAD (DT24)D = 1.59Steel
HSP8-DT24-08HSP8-DT24-12HSP8-DT24-16HSP8-DT24-20HSP8-DT24-24HSP8-DT24-28HSP8-DT24-32HSP8-DT24-36
460140102408460140102412460140102416460140102420460140102424460140102428460140102432460140102436
2.5402.7903.0403.2903.5403.7904.0404.290
.600
ROUND HEAD PIN
dimensions - MetricSIZE MFG PART # BYLER
PART #DIMENSIONS
B C
14mm ROUND HEAD (DT14)
D = 30.00Steel
MHSPF-DT14-10MHSPF-DT14-15MHSPF-DT14-20MHSPF-DT14-25MHSPF-DT14-30MHSPF-DT14-35MHSPF-DT14-40MHSPF-DT14-50MHSPF-DT14-55MHSPF-DT14-60
46015011410460150114154601501142046015011425460150114304601501143546015011440460150114504601501145546015011460
54.4259.4264.4269.4274.4279.4284.4294.4299.42
104.42
11.50
16mm ROUND HEAD (DT16)
D = 24.10Steel
MHSPF-DT16-15MHSPF-DT16-17MHSPF-DT16-25MHSPF-DT16-30MHSPF-DT16-35MHSPF-DT16-40MHSPF-DT16-45
46015011615460150116174601501162546015011630460150116354601501164046015011645
59.41-
69.4174.4179.4184.4189.41
12.80
20MMROUND HEAD (DT20)
D = 30.10Steel
MHSPF-DT20-15MHSPF-DT20-20MHSPF-DT20-25MHSPF-DT20-30MHSPF-DT20-35MHSPF-DT20-40MHSPF-DT20-45
46015012015460150120204601501202546015012030460150120354601501204046015012045
68.2473.2478.2483.2488.2493.2498.23
16.10
HEX HEAD PINALSO AVAILABLE
INCHESNO. RANGE
4 .125-.5006 .125-.6258 .250-.750
10 .375-.87512 .500-1.0016 .750-1.2520 1.00-1.5024 1.25-1.7528 1.50-2.0032 1.75-2.2536 2.00-2.50
METRICNO. RANGE10 4-615 9-2120 14-2625 19-3130 24-3635 29-4140 34-4645 39-5150 44-5655 49-6160 54-66
Grip data
*U = ZINC GOLD DICHROMATE Also available in BLACK PAINTABLE LUBE (R)
TYPE DIA. MFGPART # BYLER PART #
COLLAR DIMENSIONSE G H I
STANDARD1/2”5/8”3/4”
HSCF-R16U*HSCF-R20U*HSCF-R24U*
460192010161460192010201460192010241
.750
.9401.120
.750
.9721.107
.8121.0091.213
.519
.645
.780
METRIC14mm16mm20mm
MHSCF-R14U*MHSCF-R16U*MHSCF-R20U*
460193010142460193010162460193010202
31.0034.8043.05
21.8023.4028.80
23.3025.6032.10
14.6016.4620.45
Collars
huck-spin® ToolingMODEL # 2624HS DIA. NOSE
ASSEMBLYCOLLAR CUTTER
1/2”5/8”3/4”
592997500592997501592997503
5929975001cc5929975011cc5929975031cc
14mm16mm20mm
592997415592997501592997418
5929974151cc5929975011cc5929974181cc
To install the Huck-Spin® Fastener, you need the following: 1. PowerRig® 940/PowerRig 918® 2. 2624 HS Tool 3. Pulling Head 4. Gauge # 127444Optional: 1. Collar Cutter for removal of Huck-Spin® only
MODEL 940 Hydraulic POWERRIG®
Part # 591940
PRESSURE SETTINGS
TYPE DIA. PULL / SWAGE
PULL / CUT
RETURN / SWAGE
RETURN / CUT
Standard1/2”5/8”3/4”
390057507200
320050006600
300045006200
250040005600
Metric14mm16mm20mm
460057508200
400050007600
360045007200
300040006600
Grade 8/10.9 fastener
• Threaded pin which allows removal using collar cutting tool• Without pintails, noise and waste are reduced
benefits:A threaded pin, threaded collar, and no pintail
Tel: 800-325-3147 or 972-986-6792
47
• Threaded pin which allows removal using collar cutting tool• Without pintails, noise and waste are reduced
A threaded pin, threaded collar, and no pintail
C50l® - larGe diaMeTer hUCKbolT®
Collars
TAB-LOK™
ROUND HEAD - C50LR Truss HeadC50LT
Large Truss HeadC50L30
Thread HeadC50LH
90º Flush HeadC50L90
Other Headstyles Available:
Grip data and dimensionsTYPE MFG PART # BYLER PART # GRIP RANGE
(MIN - MAX) B D EMIN VALUES IN LBS.
SHEAR CLAMP TENSILE
ROUND HEAD STEEL 1/2”
C50LR-BR16-4C50LR-BR16-8
C50LR-BR16-12C50LR-BR16-16C50LR-BR16-20C50LR-BR16-24C50LR-BR16-28C50LR-BR16-32C50LR-BR16-36
420320081604142032008160814203200816121420320081616142032008162014203200816241420320081628142032008163214203200716361
.250-.500
.500-.750
.750-1.001.00-1.251.25-1.501.50-1.751.75-2.002.00-2.252.25-2.50
.922
1.2131.4631.7131.9632.2132.4632.7132.9633.213
3.1723.4223.6723.9224.1724.4224.6724.9225.172
14400 12050 17050
ROUND HEAD STEEL 5/8”
C50LR-BR20-4C50LR-BR20-8
C50LR-BR20-12C50LR-BR20-16C50LR-BR20-20C50LR-BR20-24C50LR-BR20-28
4203200820041420320082008142032008201214203200820161420320082020142032008202414203200820281
.250-.500
.500-.750
.750-1.001.00-1.251.25-1.501.50-1.751.75-2.00
1.141
1.4331.6831.9332.1832.4332.6832.933
3.6563.9064.1564.4064.6564.9065.156
22500 19200 27100
ROUND HEAD STEEL 3/4”
C50LR-BR24-8C50LR-BR24-12C50LR-BR24-16C50LR-BR24-20C50LR-BR24-24C50LR-BR24-28C50LR-BR24-32C50LR-BR24-36C50LR-BR24-40C50LR-BR24-44
4203200824081420320082412142032008241614203200824201420320082424142032008242814203200824321420320082436142032008244014203200824441
500-.750.750-1.001.00-1.251.25-1.501.50-1.751.75-2.002.00-2.252.25-2.502.50-2.752.75-3.00
1.375
1.7682.0182.2682.5182.7683.0183.2683.5183.7684.018
4.4064.6564.9065.1565.4065.6565.9066.1566.4066.656
32400 28400 40100
ROUND HEAD STEEL 7/8”
C50LR-BR28-16C50LR-BR28-20C50LR-BR28-24C50LR-BR28-28C50LR-BR28-32C50LR-BR28-36C50LR-BR28-40
4203200828161420320082820142032008282414203200828281420320082832142032008283614203200828401
1.00-1.251.25-1.501.50-1.751.75-2.002.00-2.252.25-2.502.50-2.75
1.594
2.4212.6712.9213.1713.4213.6713.921
5.1885.4385.6885.9386.1886.4386.688
43400 39250 55450
LARGE TRUSS HEAD
STEEL 5/8”
C50L30-BR20-4GAC50L30-BR20-8GAC50L30-BR20-12GAC50L30-BR20-16GAC50L30-BR20-20GA
42032003200414203200320081420320032012142032003201614203200320201
.250-.500
.500-.750
.750-1.001.00-1.251.25-1.50
1.375
1.4331.6831.9332.1832.433
3.6563.9064.1564.4064.656
22500 19200 27100
COLLAR STYLE DIA. MFG PART # BYLER PART #
COLLAR DIMENSIONSF G H J
STANDARD STEEL
LC
1/25/83/47/8
LC-2R16GLC-2R20GLC-2R24GLC-2R28G
42039201161420392012014203920124142039201281
.515-.540
.650-.665
.775-.790
.910-.935
.765-.800.970-1.010
1.160-1.1851.345-1.375
.610-.645
.845-.875
.930-.960 1.083-1.113
N/A
FLANGED STEEL
3LC
1/25/83/47/8
3LC-2R16G3LC-2R20G3LC-2R24G3LC-2R28G
42039203161420392032014203920324143039203281
.515-.535
.650-.665
.775-.790
.910-.930
.793-.807.970-1.010
1.200-1.7101.360-1.375
.716-.746
.929-.9591.117-1.1471.300-1.330
.094-.156
.125-.187
.156-.218
.187-.250
*Truss head, 90º countersunk and stainless steel also available*Factory minimums may apply
MODEL 940 Hydraulic POWERIG®
• Portable production and repair• 70 GPM• Electrically powered; 115 or 220 volts, single phase• Weighs 75 lbs, operational• 12.5”L x 10.5”W x 18”H
NOSE ASSEMBLIES
DIA. MODEL 2620
MODEL 2624
MODEL 2628
1/2” 592995000 592995021 592995021
5/8” - 592995008 592995008
3/4” - - 592995010
MODEL # 2620
MODEL # 2628
C50 Tooling
The Tab-Lok feature makes sure the collar stays on the pin, before installation, in overhead and down slanted pin placements. To order Tab-Lok collars, add an “L” to the end of the manufacturer’s part number.
* When using 3LC collars, include J dimension in grip dimension to determine grip number.
Standard SteelLC
Flanged Steel3LC
F FG G
H H
J
Tool Specifications:
Part # 591940
592995000 592995021592995008 592995008
592995021
592995010
Tel: 800-325-3147 or 972-986-6792
48
MODEL 2480
boM®
DIA. MFG PART # BYLER PART #
GRIP RANGE
HOLE SIZE
RIVET DIMENSIONSA B C D E M ref
3/16 BOM-R6-3BOM-R6-4
4102200603141022006041
.157-.219
.220-.2817/32 NOM.208-.222 .276-.286 .152-.168 .015 .196-.206 .785 .439
.501
1/4
BOM-R8-3BOM-R8-4BOM-R8-5BOM-R8-6BOM-R8-7BOM-R8-8BOM-R8-9BOM-R8-10BOM-R8-11BOM-R8-12
41022008031410220080414102200805141022008061410220080714102200808141022008091410220081014102200811141022008121
.157-.219
.220-.281
.282-.344
.345-.406
.407-.469
.470-.531
.532-.594
.595-.656
.657-.719
.720-.781
.277-.292 .368-.380 .205-.225 .020 .262-.275 .860
.523
.585
.648
.710
.773
.835
.898
.9601.0231.085
5/16
BOM-R10-4BOM-R10-6BOM-R10-8BOM-R10-10BOM-R10-12BOM-R10-14BOM-R10-16
41022010041410220100614102201008141022010101410220101214102201014141022010161
.188-.312
.313-.437
.438-.562
.563-.687
.688-.812
.813-.937.938-1.062
.348-.368 .468-.478 .266-.278 .025 .332-.346 1.285
.695
.820
.9451.0701.1951.3201.445
3/8
BOM-R12-4BOM-R12-6BOM-R12-8BOM-R12-10BOM-R12-12BOM-R12-14BOM-R12-16BOM-R12-18BOM-R12-20
410220120414102201206141022012081410220121014102201212141022012141410220121614102201218141022012201
.188-.312
.313-.437
.438-.562
.563-.687
.688-.812
.813-.937.938-1.062
1.063-1.1871.188-1.312
.413-.435 .553-.563 .315-.327 .030 .393-.411 1.230
.766
.8911.0161.1411.2661.3911.5161.6411.766
1/2
BOM-R16-4BOM-R16-6BOM-R16-8BOM-R16-10BOM-R16-12
4102201604141022016061410220160814102201610141022016121
.251-.375
.376-.500
.501-.625
.626-.750
.751-.875
9/16 NOM.546-.581 .745-.755 .415-.438 .035 .529-.544 1.530
1.0001.1251.2501.3751.500
5/8
BOM-R20-4GABOM-R20-8GABOM-R20-12GABOM-R20-16GABOM-R20-20GA
4102202004141022020081410220201214102202016141022020201
.251-.500
.501-.750.751-1.000
1.001-1.2501.251-1.500
11/16 NOM.687-.728 .931-.941 .507-.545 .040 .669-.685 1.710
1.2131.4631.7131.9632.213
3/4BOM-R24-4BOM-R24-8BOM-R24-12BOM-R24-16
41022024041 410220240814102202412141022024161
.251-.500
.501-.750.751-1.000
1.001-1.250
13/16 NOM.828-.873 1.120-1.130 .637-.654 .050 .795-.816 2.150
1.3801.6301.8802.130
boM® Tooling
Contact Byler Rivet for more information about tooling regarding larger sizes. Minimums may apply.
*Use only in very low volume repair applications
*All steel
MIN VALUES IN LBS. DIA. SHEAR TENSILE3/161/4
5/163/81/25/83/4
28005100805011100201502850045100
1800325052007250
130002050029100
DIA.NOSE ASSEMBLY - PNEUMATIC NOSE ASSEMBLY - HYDRAULIC
245 246 / 256 2025 2480 2580 26003/16 - - 59299994 59299994 - -1/4 592998301 592998301 - - 592998301 -
5/16 - 59299769 - - 59299769 5929931193/8 - 592991272* - - - 592993122
3/16" and 1/4" DIA.MODEL # 246 / 256 MODEL # 2025
• Structural high strength blind steel fastener• Excellent pull-together properties, high clamping force
benefits:
The boM® is a... High-strength industrial blind bolt. Meets ASTM A307 strength requirements. Use in situations where a two-piece fastener would commonly be used. BOM® fastener install from just one side by a single worker--saving time and reducing cost.
Tel: 800-325-3147 or 972-986-6792
49
hUCKTainers®
NOTE: Only wide bearing pin HLPE should be used directly against FRP. **Use “C” dimension for unencapsulated hucktainer; use “D” for encapsulatedLonger grip ranges available. Hertz and Ryder yellow encapsulated heads available. Minimums may apply.
STANDARD LO PRO HEAD MEDIUM BEARING HEAD WIDE BEARING HEAD
TYPE MFG. PART # BYLER PART #
MFG. PART # BYLER # MFG. PART # BYLER # GRIPRANGE
min - max
DIMENSIONS GRAY ENCAPSULATED GRAY ENCAPSULATED A B C** D**
STEELZINC
PLATEDGOLD
CHROMATEPin
Diameter = .395
HLPP-R12-10PLHLPP-R12-12PLHLPP-R12-14PLHLPP-R12-16PLHLPP-R12-18PLHLPP-R12-20PL
450113121024501131212245011312142450113121624501131218245011312201
HLPMG-R12-10PLHLPMG-R12-12PLHLPMG-R12-14PLHLPMG-R12-16PLHLPMG-R12-18PLHLPMG-R12-20PL
450118121011450118121211450118121411450118121611450118121811450118122011
HLPEG-R12-10PLHLPEG-R12-12PLHLPEG-R12-14PLHLPEG-R12-16PLHLPEG-R12-18PLHLPEG-R12-20PL
450116121024501161212245011612142450116121624501161218245011612202
.562-.687
.687-.812
.812-.937.937-1.0621.062-1.1871.187-1.312
.624
.749
.874
.9991.1241.249
2.2322.3572.4822.6072.7322.857
.154
.279
.404
.529
.654
.779
.079
.204
.329
.454
.579
.704
HLPP: Longer grips available.Minimums may apply.
WHITE ENCAPSULATED WHITE ENCAPSULATED GRIP RANGE A B C** D**HLPMW-R12-10PLHLPMW-R12-12PLHLPMW-R12-14PLHLPMW-R12-16PLHLPMW-R12-18PLHLPMW-R12-20PL
450118121014501181212145011812141450118121614501181218145011812120
HLPEW-R12-10PLHLPEW-R12-12PLHLPEW-R12-14PLHLPEW-R12-16PLHLPEW-R12-18PLHLPEW-R12-20PL
450116121024501161212245011612142450116121624501161218245011612120
.562-.687
.687-.812
.812-.937.937-1.0621.062-1.1871.187-1.312
.624
.749
.874
.9991.1241.249
2.2322.3572.4822.6072.7322.857
.154
.279
.404
.529
.654
.779
.079
.204
.329
.454
.579
.704
STANDARD LO PRO HEAD with Pin-Lock
WIDE BEARING HEADEncapsulated with Pin-Lock
MEDIUM BEARING HEAD Encapsulated with Pin-Lock
Hucktainer® fasteners are designed to meet the special needs of FRP fabrication. These fasteners install with consistent pressure that reduces potential crushing or crazing of FRP panels.
CLEARANCE SLEEVE
MEDIUM BEARING SLEEVE WIDE BEARING SLEEVE
MFG. # BYLER # MFG.# BYLER # MFG. # BYLER #
HLPSC-R12 45019122 HLPSM-R12 45019123 HLPS-R12 45019121
for frp and e-TraCKPin-LockThe optional pin-lock is a nylon “star” that retains the pin in the hole prior to installation.
NOTE: Hole Size = .405 -.421 Use Drill Bit #16687140 (13/32)
Special “Supreme” Collar HLPTS-R12
Byler Part # 45019126
Clearance Sleeve Medium Bearing Sleeve Wide Bearing Sleeve
sleeves
NOTE: Only wide bearing sleeve HLPS should be used directly against FRP.
installation ToolingMODEL #2025
PNEUDRAULIC
MODEL #2480
HYDRAULIC
Nose Assembly for 2025 & 2480
Part # 592993464
Tel: 800-325-3147 or 972-986-6792
50
CaMTainers® for frp and e-TraCK
bottom rail bolt Kits 8 Piece Ribbed Neck
Carriage Bolt Kit3/8 X 1-1/4 with Plastic
Washers & Nuts Part # 9702122011
8 Piece Torx Button Head Kit
3/8 X 1-1/4 with Plastic Washers & Nuts
Part # 9702122010
TYPE BYLER PART # MFG. PART # SIZE BIT
SIZEBIT
PART #
FlangedNut
Hd Dia. = 1”
07890500000789059000078906000807890600500789060055
890-50000 / 396-8004890-59000 / 396-8006890-60008 / 396-8002890-60050 / 396-8003890-60055 / 396-8011
M6 X 12.7mm5/16-18 X 3/8”5/16-18 X 1/2”5/16-18 X 5/8”
5/16-18 X 1
T-50T-55T-55T-55T-55
4855015048550155485501554855015548550155
Flanged Nut
Hd Dia. = 5/8”
0789060020 890-60020 / 396-8005 5/16-18 X 1/2 T-50 48550150
TYPE OFHEAD
BYLER PART # MFG. PART # SIZE
StandardHead
Head Dia.= 7/8”
07883804600788380500078838211207883829200788383000
883-80461 / 395-8148883-80500 / 395-8150883-82112 / 395-8149883-82920 / 395-8156883-83000 / 395-8146
5/16-18 X 5/85/16-18 X 3/45/16-18 X 7/85/16-18 X 1
5/16-18 X 1-1/4White Encap. Head Dia. = 1” 0788385090 883-85090 / 395-8154 5/16-18 X 1.437
Gray Encap. Head Dia. = 1”
07883821130788382921
883-82113 / 395-8166883-82921 / 395-8139
5/16-18 X 7/85/16-18 X 1
Standard Head Gray Encapsulated HeadCamtainer Flanged Nut
T-nUTsTYPE OF
T-NUTBYLER PART # SIZE HEAD STYLE
Barbed Poly-Seal T-Nuts
0753400107534002
5/16-18 X 1/25/16-18 X 1/2
White EncapsulatedGray Encapsulated
PolySealGrade 2
Steel zinc plated
07750071077500720753200207532004
5/16-18 X 7/165/16-18 X 7/165/16-18 X 5/85/16-18 X 5/8
White EncapsulatedGray EncapsulatedWhite EncapsulatedGray Encapsulated
Ribbed PolySealGrade 2
Steel zinc plated
07520210752022
0753400107534002
1/4-20 X 7/161/4-20 X 7/165/16-18 X 1/25/16-18 X 1/2
Gray EncapsulatedWhite EncapsulatedWhite EncapsulatedGray Encapsulated
Round BaseSteel T-Nut
0752000077510
1/4-20 X 7/165/16-18 X 5/8
UnencapsulatedUnencapsulated
Nic-Nut© 07642232 — White Encapsulated
benefits Barbed PolySeal T-Nuts• Cast-in locking barbs prevent part from rotating or pushing out during assembly. • Cuts assembly labor in half• Parts can be reused.
PolySeal T-Nuts• Double Seal for water tight installation• Provides more bearing surface to prevent cracking of panels
Nic-Nut© Round Base T-Nut
PolySeal T-Nut
Barbed PolySeal T-Nut
Ribbed PolysealT-Nut
Cross MeMber bolTsHEAD STYLE PART # SIZE BIT
SIZEBIT
PART #
Torx Truss Washer Head w/ Shoulder
Head Dia = 7/8”
07510020751251
1/4-20 X 3/45/16-18 X 5/8
T-30T-40
4855003048550040
Hex Washer Head
Head Dia = 7/8”
0753005120753007
5/16-18 X 3/45/16-18 x 1
T-40T-40
4855004048550040
Torx Truss Head
Head Dia = 3/4”077441015* 5/16-18 X 15/16 T-40 48550040
Torx Truss Head w/ Cone
WasherHead Dia = 3/4”
07741017 5/16-18 X 15/16 T-40 48550040
*Noted parts do not include lock patch
Torx Truss Washer Head
Torx Truss Head
HEAD STYLE PART # SIZE BIT
SIZEBIT
PART #Torx Truss
Head steel/zinc
platedHead Dia =
3/4”
0753003075300407530060753010*0753013*
5/16-18 x 1/25/16-18 x 3/4
5/16-18 x 15/163/8-16 X 1-1/43/8-16 X 1-7/8
T-40T-40T-40T-45T-45
4855004048550040485500404855004548550045
Torx Truss Washer
HeadHead Dia =
7/8”
075104907510510753005
1/4-20 X 1/21/4-20 X 5/85/16-18 x 3/4
T-30T-30T-40
485500304855003048550040
Torx Truss Washer Head w/ Shoulder
Hex Washer Head
Torx Truss Head
Torx Truss Headw/ Cone Washer
boTToM rail
bolT KiTs
also available
Installation • Drill or punch hole to proper size: 5/16: 13/32 M6: Letter U• Insert bolt into hole• Assemble nut on inside of trailer• Tighten nut
TORX nutbolt
Parts are Steel/Zinc.
Tel: 800-325-3147 or 972-986-6792
51
bolTs, sCreWs, nUTs and Washers
Material:Steel, Stainless, Aluminum
Plating:Plain, Black Ox, Zinc/Yellow, Hot Dip Galvanized
Washers
Materials:Steel - Grade 2, 5, 8Stainless - 18/8, 300 series
Platings:PlainPhosphorus OilZincZinc/Yellow
Nylon Insert Nut
Kep Nuts
Hex Nut
Serrated FlangeNut
Wing Nut
Flanged Nut
nuts
bolts/screws
rail bolts
We specialize in STAINLESS!
Hex Head Cap Screws
Elevator Bolts
Torx Button Head Rail Bolts available in steel/stainless in: 3/8-16 x 1, 3/8-16-1 1/4, 3/8-16-1 1/2
Carriage Bolts
Hex Washer Head Bolts
Pan Head Screws
Round Head Screws
Thread Cutting Screws/TEKS®
Floor Screws Tapping Screws
Materials:Steel - Grade 2, 5, 8Stainless - 18/8, 300 series
Plating:PlainPhosphorus OilZincZinc/YellowOther platings available
Phillips TorxSlotted Hex Head Hex Washer Head
Drives:
Screw Points:
A/ABSelf Tapping
Self-Drilling Machine Screw/Bolt
Lag Screw
Optional: Nylok® patch or pellet available for any of these products. Other Head Styles Available
Minimums may apply.
Regular Split Lock
U.S.S. Flat Washer
Fender Washer
Bonded Seal Washer
1
2 3
4
Tel: 800-325-3147 or 972-986-6792
52
inserT biTs & biT holders
TORXPOINT SIZE
HEX DRIVE
OVERALL LENGTH PART #
T10
1/4”
1” 480410110T15 1” 480415110T20 1” 480420110T20 2” 480420120T25 1” 480425110T25 2” 480425120T27 1” 480427110T27 2” 480427120T30 1” 480430130T30 2” 480430120T40 1” 480440110T40 2” 480440120T25
5/16” 1-1/4”
480425212T30 480430212T40 480440212T45 480445212T50 480450212T55 480455212
SQUAREDRIVE
POINT SIZE
HEX DRIVE
OVERALL LENGTH PART #
#1
1/4”
1” 480501110#2 1” 480502110#2 2” 480502120#2 3” 480502130
PHILLIPSPOINT SIZE
HEX DRIVE
OVERALL LENGTH PART #
#11/4”
1” 480101110#1 2” 480101120#1 5/16” 1” 480101210#2
1/4”1” 480102110
#2 2” 480102120#2 5/16” 1” 480102210#3
1/4”1” 480103110
#3 2” 480103120#3
5/16”1” 480103210
#4 1” 480104210SLOTTED
POINT SIZE
HEX DRIVE
OVERALL LENGTH PART #
#1
1/4”
1” 480201110#2 1” 480202110#3 1” 480203110#3 2-3/4” 480203126
PHILLIPSPOWER
POINT SIZE
HEX DRIVE
OVERALL LENGTH PART #
#1
1/4”
2-3/4” 480101126#1 3” 480101130#1 3-1/2” 480101134#1 4” 480101140#1 6” 480101160#2 2-3/4” 480102126#2 3” 480102130#2 3-1/2” 480102134#2 4” 480102140#2 6” 480103160#3 2-3/4” 480103126#3 3” 480103130#3 3-1/2” 480103134#3 4” 480103140#3 6” 48010160
SOCKET BIT HOLDERS
DRIVE HEX PART #
1/4” 1/4” 4810113/8” 1/4” 4810313/8” 5/16” 4810321/2” 1/4” 4810411/2” 5/16” 481042
MAGNETIC BIT HOLDERS
HEX DRIVE HEX LENGTH TYPE PART #
1/4” 1/4” 3” SDHD
481211125481211225
1/4” 5/16” 3-1/2” HD 4812122345/16” 1/4” 3-1/2” HD 4812212345/16” 5/16” 3-1/2” HD 481222234
SpeCIAL BITS AVAILABLe upON ReQueST
see page 70 for socket Tools & Kits
SD = Standard Duty HD = Heavy Duty
# 6025123281 # 60210307341 # 602103077756
Tel: 800-325-3147 or 972-986-6792
53
floor sCreWsTorx self drilling screws
HEAD STYLE SIZE
ALLOY: STEELBLACK PHOS/OIL ZINC PLTD
TYPE F TYPE T TYPE F
FLATHEAD
1/4-20 x 1 155081600 1550816000 -
1/4-20 x 1-1/8 1550818000 - -
1/4-20 x 1-1/4 15508200 - -
1/4-20 x 1-1/2 155082400 1550824000 155082402
1/4-20 x 2 155083200 1550832000 155083202
1/4-20 x 2-1/4 155083600 155083601 -
1/4-20 x 2-1/2 155084000 1550840000 155084002
1/4-20 x 3 155084800 1550848001 155084801
1/4-20 x 3-1/2 155085600 1550856000 -
1/4-20 x 4 155086400 1550864000 -
1/4-20 x 4-1/2 155087200 - -
1/4-20 x 5 155088000 1550880000 -
1/4-20 x 6 155089600 1550896000 -
5/16-18 x 1 - 1551016000 -
5/16-18 x 1-1/4 155101800 - -
5/16-18 x 1-1/2 155103100 - -
5/16-18 x 2 155103200 1551032001 155103202*
5/16-18 x 2-1/4 155103600 1551036000 -
5/16-18 x 2-1/2 155104000 1551040001 -
5/16-18 x 3 155104800 1551048000 155104801
5/16-18 x 3-1/2 155105600 1551056000 -
5/16-18 x 4 155106400 - -
5/16-18 x 4-3/4 155107600 - -
5/16-18 x 5 155108600 - -
5/16-18 x 6 155109600 - -
3/8-16 x 2 155123200 - -
HEAD STYLE SIZE
ALLOY: STEELBLACK PHOS/OIL ZINC PLTDTYPE F TYPE T TYPE F
PANHEAD
1/4-20 x 1-1/2 - - 1550824002
1/4-20 x 2 - - 1550832002
5/16-18 x 1 155101602 155101603 -
5/16-18 x 1-1/4 - - 155101800
5/16-18 x 1-1/2 - - 155103103
5/16-18 x 2 155103201 - 155103202
5/16-18 x 2-1/4 155103601 - -
5/16-18 x 2-1/2 - - 155104001
5/16-18 x 3 - - 155104802
5/16-18 x 3-1/2 155105601 - -
5/16-18 x 4 155106402 - 155106401
TRUSS HEAD 5/16-18 x 1-1/2 - - 155103102
Torx Flat Head Torx Pan Head
A threaded steel fastener used in a pre-drilled hole in the floor boards of flat bed trailers; used for attaching plywood for interior trailer applications. Pan head floor screws are great for deep channel metal floor applications.
Torx Insert Bits used for installation:T30 with 1/4” hex = Part # 48550031 T40 with 5/16 hex = Part # 48550130
Trailer Body Floor DrillPart #: 6014952250
• 1 HP Heavy Duty Motor • Ergonomic Handle Design• Free Speed RPM: 2,250 • ½” HD Jacobs Chuck• Average CFM 16 • ½” Drive Spindle• Net Weight 7.8 lbs. • Total Length 30”
Torx Truss Head
HEAD STYLE SIZE POINT
PHILLIPSWAFER
zinc platedsteel
10-24 x 3/4” #310-24 x 1” #3
10-24 x 1-1/4” #310-24 x 1-7/16” #310-24 x 1-1/2” #3
10-24 x 2” #310-24 x 2-1/4” #310-24 x 2-1/2” #3
HEAD STYLE SIZE POINT
PHILLIPSSQUAREWAFER
zinc platedsteel
10-24 x 3/4” #310-24 x 1” #310-16 x 1” #2
10-24 x 1-1/4” #310-16 x 1-1/2” #210-16 x 1-3/4” #2
HEAD STYLE SIZE POINT
SIX LOBE WAFER
yellowzinc plated
steel
10-16 x 1” #2
10-16 x 1-1/4” #2
Wafer self drilling screws
Phillips Wafer Head Phillips Square Wafer Head Six Lobe Wafer Head
*Available in Stainless Steel. Other platings available (minimums may apply)
Tel: 800-325-3147 or 972-986-6792
54
MeChaniCs lenGTh drill biTs
3-FLATS ON SHANK
SIZE PART # OVERALL LENGTH
FLUTE LENGTH QTY
1/165/643/327/641/89/645/3211/643/1613/647/3215/641/4
17/649/32
166869201668693016686940166869501668696016686970166869801668699016687000166870101668702016687030166870401668705016687060
1-7/82
2-1/42-3/82-1/22-5/82-3/42-7/8
33-1/83-1/43-3/83-1/23-5/83-3/4
7/81
1-1/41-5/161-7/161-9/161-11/161-13/161-7/8
1-15/162
2-1/162
2-1/82-1/4
12
19/645/1621/6411/3223/643/8
25/6413/3227/647/1629/6415/3231/641/2
1668707016687080166870901668710016687110166871201668713016687140166871501668716016687170166871801668719016687200
3-7/84
4-1/164-1/84-3/164-1/44-5/164-3/84-7/164-1/24-5/84-3/44-7/8
5
2-3/82-1/22-9/162-5/8
2-11/162-11/162-3/4
2-13/162-7/8
2-15/163
3-1/83-1/43-3/8
6
MeChaniCs lenGTh drill250-Ub
Special Hi-Molybdenum tool steel. 135° Split Point, Gold Surface Treated for maximum lubricity
3-FLATS 3/8” REDUCED SHANK
SIZE 258-UB OVERALL LENGTH
FLUTE LENGTH QTY
13/3227/647/16
29/6415/3231/641/2
16681560166815701668158016681590166816001668161016681620
4-3/84-7/164-1/24-5/84-3/44-7/8
5
2-13/162-7/8
2-15/163
3-1/83-1/43-3/8
6
3-flaTs redUCed shanK258-Ub
Special Hi-Molybdenum tool steel. 135° Split Point, Gold Surface Treated for maximum lubricity.
WHY CHOOSE ULTRA BOR (UB)?• Substantially Longer Cutting Life• Cuts Harder Materials• Stops Drill Walking / Fast Penetration• Holds Tighter Hole Size• Runs Cooler, Uses Less Torque• Stops Chuck Slippage• Replaces Cobalt in Work Hardening
Stainless Steel Applications• Improved Performance at Lower Cost • American Made• Sharpenable
Special Hi-Molybdenum tool steel. Precision ground: points, flutes, body, clearance and drill diameter for the ultimate in accuracy and performance. Gold surface treated for maximum lubricity. Designed for hand held drills. Recommended for stainless steel & other hard metal drilling applications. 3 flats on shank sizes 3/16” and larger.
SPM-15Sizes 1/16” thru 1/2” by 32nds.#16066470
SPM-29 Fractional Sizes 1/16” thru 1/2” by 64ths.#16066480
SPM-21R 3/8” SHANK 1/16” - 1/4” by 64ths + 9/32” - 1/2” by 32nds #16092340
REDUCED SHANK
MeChaniC lenGTh drill biT seTs
#1seller
ULTRA-DEX 29pc SetsSuper Premium 135° Split Point, 3 Flats on Shank. Mechanic Length Ultra Dex 135° Split Point
SPM-29PFractional sizes 1/16” thru 1/2” by 64ths #16066820
RSPM-29 3/8” SHANKwith flats on shankFractional sizes 1/16” thru 1/2” by 64ths #16057920
SPM-15 SPM-29
Tel: 800-325-3147 or 972-986-6792
55
jobber lenGTh drill biTs
jobber lenGTh seTs BLACK & GOLD PREMIUM
Super Premium, Heavy-Duty 135° Split Point, Gold treated for maximum lubricity & torsional strength.
SP-29Fractional Sizes 1/16” thru 1/2” by 64ths.#16044150
SP-21 Sizes 1/16” thru 3/8” by 64ths.#16044130
SP-15Sizes 1/16” thru 1/2” by 32nds.#16044120
JOBBER LENGTHLETTER
SIZE PART # OVERALL LENGTH
FLUTE LENGTH
FG
1663951016639520 4-1/8 2-7/8
WIREWIRE
GAUGE PART # OVERALL LENGTH
FLUTE LENGTH
457
10112021222324252627282930
1663897016638980
3-3/4 2-1/2
1663900016639030
3-5/8 2-7/16
16639040 3-1/2 2-5/161663913016639140 3-1/4 2-1/8
166391501663916016639170
3-1/8 2
166391801663919016639200
3 1-7/8
1663921016639220 2-7/8 1-3/4
16639230 2-3/4 1-5/8
SUPER PREMIUM DRILLS
FRACTIONAL
SIZE PART # OVERALLLENGTH QTY
1/165/643/327/641/8
9/645/3211/643/16
13/647/32
15/641/4
17/649/32
19/645/16
21/6411/3223/643/8
25/6413/3227/647/16
29/6415/3231/641/2
1660558016605590166056001660561016605620166056301660564016605650166056601660567016605680166056901660570016605710166057201660573016605740166057501660576016605770166057801660579016605800166058101660582016605830166058401660585016605860
1-7/82
2-1/42-5/82-3/42-7/83-1/83-1/43-1/23-5/83-3/43-7/8
44-1/84-1/44-3/84-1/24-5/84-3/44-7/8
55-1/85-1/45-3/85-1/25-5/85-3/45-7/8
6
12
6
sUper preMiUM jobber lenGTh 240-Ub
Special Hi-Molybdenum tool steel. 135° Split Point for fast penetration and accurate starting without a center point. Gold Surface Treated for maximum lubricity. Will not walk! For hardening grades of stainless steel and hard metal drilling applications.
ULTRA-DEXJOBBERS LENGTH
SP-29P Jobber Length Ultra Dex 135° Split PointFractional sizes 1/16” thru 1/2” by 64ths.#16044170
Tel: 800-325-3147 or 972-986-6792
56
sCreW MaChine & speCialTY drill biTs
Special Hi-Molybdenum tool steel. 135° Split Point, Gold Surface Treated for maximum lubricity. Will not walk! For hardening grades of stainless steel and hard metal drilling applications. Extra rugged uncleared construction gives superior performance and less breakage.
DOUBLE ENDED FRACTIONAL
SIZE PART # SIZE 490-G
3/327/641/89/64
16695090166950801669598016695070
5/323/167/321/4
16695060166950501669504016695030
SCREW MACHINELETTER
SIZE PART # OVERALL LENGTH
FLUTE LENGTH
FG
1662365116623661 2-5/8 1-7/16
sCreW MaChine lenGTh260-Ub
doUble ended 490-G
DOUBLE ENDEDWIRE
WIREGAUGE PART # OVERALL
LENGTHFLUTE
LENGTH
10112030
16695020166950101669500016694990
2-5/16
5/82-1/8
2
SILVER & DEMINGDIA. PART # DIA. 280-UB
33/6417/3235/649/16
37/6419/3239/645/8
41/6421/3243/6411/1645/6423/3247/643/4
49/6425/3251/6413/1653/6427/32
16629550166295601662957016629580166295901662960016629610166296201662963016629640166296501662966016629670166296801662969016629700166297101662972016629730166297401662975016629760
55/647/8
57/6429/3259/6415/1661/6431/3263/64
1”1-1/321-1/161-3/321-1/8
1-5/321-3/161-7/321-1/4
1-5/161-3/8
1-7/161-1/2
16629770166297801662979016629800166298101662982016629830166298401662985016629860166298701662988016629890166299001662991016629920166299301662994016629950166299601662997016629980
silver & deMinG shanK280-Ub
1/2” Reduced Shank,space age nitro-carbu-rized steel withstands higher drilling tempera-tures while maintaining sharpness. 6” in length.
EXTRA LONG LENGTH DRILLSXGT-UB
SIZE 6” 9” 12”1/89/645/3211/643/1613/647/3215/641/49/325/1611/323/8
13/327/161/2
16639240166392601663927016639280166393001663932016639330166393501663936016639380166393901663940016639410166394201663943016639440
16640780N/A
16640790N/A
16640800N/A
16640810N/A
1664082016640830166408401664085016640860
N/A1664087016640880
16643050N/A
16643060N/A
16643070N/A
16643080N/A
1664309016643100166431101664312016643130
N/A1664314016643150
eXTra lonG sUper preMiUMXGT-Ub
Special Hi-Molybdenum tool steel. 135° Split Point, Gold Surface Treated for maximum lubric-ity, will not walk. All tools individually packaged in clear tubes.
silver & deMinG seTSuper Premium 1/2” Shank Drills, Black & Gold Finish. 135° Split Point, 6” Overall length. Three flats on Shank.
S&D-4SP # 16012250Sizes: 9/16, 5/8, 3/4 and 1”
SCREW MACHINEFRACTIONAL
SIZE PART #
1/165/643/327/641/89/645/3211/643/1613/647/3215/641/4
17/649/3219/645/1621/6411/3223/643/8
25/6413/3227/647/1629/6415/3231/641/29/165/8
11/163/4
166877101668772016687730166877401668775016687760166877701668778016687790166878001668781016687820166878301668784016687850166878601668787016687880166878901668790016687910166879201668793016687940166879501668796016687970166879801668799016688030166880701668922016689260
Tel: 800-325-3147 or 972-986-6792
57
drill seTs
heX shanK sTep drill seT78-Qr
(QUICK RELEASE)
Super Premium, Heavy-Duty 135° Split Point, Black & Gold Jobber Length combined with Su-per Premium Gold Spiral Point Taps, Gold Fin-ish for maximum lubricity & torsional strength.
78-QR # 16001441Sizes 1/8” - 1/2”, 3/16” - 1/2” & 3/16” - 7/8”
STEP DRILLS
SIZE PART ## OF
HOLE SIZES
RANGE SHANK SIZE
STEP INC.
STEP THCKNS
1/8-1/23/16A3/16B1/4-3/49/16-113/161/4 K0
16600700166007011660070216600703166007041660071016600711
136
1298
1/8-1/23/16-1/23/16-7/81/4-3/49/16-1”
13/16-1-3/81/4-1-3/8
1/41/32 1/8
3/81/8
1/16
3/8 5/32
101/321/8 *note
sUper preMiUMTap & die seTs
18pc Set # 16057580Super Premium, Heavy-Duty 135° Split Point, Black & Gold Jobber Length combined Spiral Point TapsSizes 1/16” thru 1/2” by 32nds.Drill Sizes:#36, 29, 25, 21, 7, F, 5/16, U & 27/64Tap Sizes:6-32, 8-32, 10-24, 10-32, 1/4-20, 7 5/6 -18, 3/8-16, 7/16-14 & 1/2-13
Spiral Point Plug Tap & Hex Drills
15pc Set #16035174Set Contains:HSS spiral point taps & HSS hex dies sizes: 6-32, 8-32, 10-24, 10-32, 12-24 & 1/4-20T-Handle tap wrenches: 0 - 1/4” Economy die stock & Screw pitch gauge.
25pc Set #16035173Set Contains:HSS spiral point taps & HSS hex dies sizes: 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13 & 1/2-20HSS pipe tap and hex die size: 1/8-27 NPTT-Handle tap wrenches: 3/16” - 1/2”Die stock & Screw pitch gauge.Supplied in sturdy red plastic case.
Metric 23pc Set # 16035170Set Contains:HSS spiral point taps & HSS hex dies sizes: 3.0 - .50, 3.5 - .60, 4.0 - .70, 5.0 - .80, 8.0 - .125, 10.0 - 1.50 & 12.01 - 1.75HSS pipe tap and hex die size: 1/8-27 NPTT-Handle tap wrenches: 0 - 1/4” & 3/16” - 1/2”Straight handle tap wrench: #4 - 1/2”Die stock & Screw metric pitch gauge.Supplied in sturdy red plastic case.
MUlTi-diaMeTer sTep drills78-Ub
Special moly alloy steel. Gold surface treated for maximum lubricity. Dual flute construction drills clean accurate holes in thin materials, quickly & easily. Use for rigid plastics such as plexiglas, wood or composite materials. A starter hole of the smallest step diameter will speed the drilling process.
bolT & sCreW eXTraCTor seT
BR-10 # 1605851010pc Spiral Bolt Extractor SetFive Super Premium left hand drills, gold finish.
Sizes:3/32, 1/8, 3/16, 1/4 & 5/16 and five spiral screw extractors. Sizes 1, 2, 3, 4, & 5
Car reaMer seT
51-UB, SM-4FS # 16012281Super Premium 3 Flats on ShankFive Super Premium left hand drills, gold finish.
Sizes:5/16, 3/8, 7/16 and 1/2
NOTE: Part # 16600711 Extra length steps at 7/8, 1-1/8 & 1-3/8 for conduit knock-ous.
Tel: 800-325-3147 or 972-986-6792
58
heavY dUTY drill biTsheavY dUTY
Black Finish, 135° Split Point, Surface Treated, High Speed Steel
STUBBY/SCREW MACHINE
COBALT HEAVY DUTY DRILLS
SIZE JOBBER LENGTH
3/641/165/643/327/641/8
9/645/3211/643/16
13/647/32
15/641/4
17/649/32
19/645/16
21/6411/3223/643/8
25/6413/3227/647/16
29/6415/3231/641/2
166080001660801016608020166080301660804016608050166080601660807016608080166080901660810016608110166081201660813016608140166081501660816016608170166081801660819016608200166082101660822016608230166082401660825016608260166082701660828016608290
CobalT heavY dUTY
Gold Finish, Heavy Duty 135° Split Point. Cobalt permits speeds 30% over regular Heavy Duty Drills
JOBBERS LENGTH
HEAVY DUTYDRILLS
SIZE SCREW MACHINE
JOBBER LENGTH
1/641/323/641/165/643/327/641/89/645/3211/643/1613/647/3215/641/4
17/649/3219/645/1621/6411/3223/643/8
25/6413/3227/647/1629/6415/3231/641/29/165/8
11/163/4
13/167/8
15/16
164440116444021644403164440416444051644406164440716444081644409164441016444111644412164441316444141644415164441616444171644418164441916444201644421164442216444231644424164442516444261644427164442816444291644430164443116444321644433164443416444351644436164443716444381644439
161140116114021611403161140416114051611406161140716114081611409161141016114111611412161141316114141611415161141616114171611418161141916114201611421161142216114231611424161142516114261611427161142816114291611430161143116114321611433161143416114351611436161143716114381611439
eXTra lonG heavY dUTY
EXTRA LONG LENGTH
benefits of heavy duty drill bits• Heavy Duty construction provides additional strength• American Made• Economical, all-purpose bits
DOUBLE ENDED
DOUBLE ENDED DRILLS
SIZE FRACTIONAL
7/641/8
9/645/323/167/321/4
1698807169880816988091698810169881216988141698816
SIZE WIRE
112030
169881116988201698830
doUble ended
Black Finish, 135° Split Point, Surface Treated, High Speed Steel
Exceptional performance in deep hole drilling applications. Can drill 12 or more diameters deep, without drill removal to clear chips.
EXTRA LONG LENGTH DRILLS
HEAVY DUTYSIZE 6” 12”3/641/165/643/327/641/8
9/645/3211/643/16
13/647/32
15/641/4
17/649/32
19/645/16
21/6411/3223/64
3/825/6413/3227/647/16
29/6415/3231/64
1/2
16575031657504165750516575061657507165750816575091657510165751116575121657513165751416575151657516
165850316585041658505165850616585071658508165850916585101658511165851216585131658514165851516585161658517165851816585191658520165852116585221658523165852416585251658526165852716585281658529165853016585311658532
N/A
1657520
N/A
1657524
N/A
1657528
N/A
1657532
Tel: 800-325-3147 or 972-986-6792
59
deCiMal eQUivalenT CharT
DRILL SIZE Decimal
DRILL SIZE Decimal
DRILL SIZE Decimal
DRILL SIZE Decimal
DRILL SIZE Decimal
Tel: 800-325-3147 or 972-986-6792
60
hUCK® ToolinG
Model 2025
#1seller
Model 2480
FASTENERS DIA. STANDARD 3” LONG 6”BOM® 3/16” 59299994
N/AMagna-Lok®
Magna-Bulb®3/16” 592993300
592993303*1/4” 592993301
592993305* 592993306*3/16” &
1/4” 592993487N/A
Hucktainer® 3/8” 592993464Magna-Grip® 3/16" 592991456 592991457
592993201 5929932021/4" 592991458 592991459
592993204 592993205C6L® 3/16" 592993003
N/A1/4" 592993006
*Replaceable Anvil Insert
nose assemblies for 2025 & 2480
HYDRAULIC TOOL The Model 2480 is a very lightweight tool which provides for high-speed installation of a wide range of HuckBolts and Huck blind fasteners. Sets up to 32 fasteners per minute. The tool has only one moving part, resulting in outstanding reliability and minimal maintenance. Great for use in limited clearance areas.
Byler Part #:5912480
TOOL SPECIFICATIONS Sets: 3/16" Bom, -12 Hucktainer; 3/16" & 1/4" Magna-Lok, Magna-Bulb, Auto-Bulb, Magna-Grip & C6L / 120L Weight: 5.75 lbs. Req. Air Pressure: 90-100psiFeatures: in-line piston for one-stroke installation & a pintail deflectorFluid: Automatic Transmission Fluid DEXTRON III® or equivalentWorking Stroke: .675"Capacity: 5290 lbs @ 90 psiOptions: Extended Piston version (2025L) Optional Vacuum Collection System (2025V)
TOOL SPECIFICATIONS
Sets: 3/16" Bom, -12 Hucktainer; 3/16" & 1/4" Magna-Lok, Magna-Bulb, Auto-Bulb, Magna-Grip & C6L / 120L Weight: 2.2 lbs. Pull Pressure: 8400 psiReturn Pressure: 3200 psiStroke: .85"Pull Capacity: 5700 lbs
PNEUDRAULIC TOOL The Model 2025 is a high performance, ergonomic tool designed for use with blind rivets & small diameter two-piece Huck bolts. Made for both high speed production (up to 35 fasteners/minute) & repair applications. Lightweight, reliable & easy to use, these tools deliver a level of performance never before possible in a low cost pneudraulic tool.
Byler Part #:5912025
Fill BottlePart #:593120337
940 RIG Operates: 1 tool onlyFlow Rate: .3 GPMPower: Electric: 115 or 220 volts, single phaseWeight: 75 lbs, operational; 66 lbs without fluidLength: 12.5" L x 10.5" W x 18" H
918 & 918(-5) RIGS Operates: 2 tools Flow Rate: 2 GPMPower: Electric: 220, 440 or 550 volts, 3 phaseWeight: 708 lbs, operational; 585 lbs without fluidLength: 44" L x 25" W x 30" HAlso Available: 918(-5) RIG operates up to 3 tools Part # 5919185
hydraulic poWeriGs® for Model 2480
Part # 591918
Part # 591940
Includes: • 2025 tool• Four Nose Assemblies• Magna-Loks®
• Huck Bolts® & Collars®
• Stainless Huck Bolts®
• "Paccar" Huck Bolts®
• Variety of Steel Inserts• 2 Expandable Insert Tools
Complete huck Cab Kit
+
hydraulic hose assembliesPART # LENGTH
59311830912 12 ft59311830926 26 ft59311830938 38 ft59311830952 52 ft
Ask your Byler Sales Representative about Huck Tooling
Rentals!
TOOLINGFOR RENT
Part # 650002
Tel: 800-325-3147 or 972-986-6792
61
FASTENERS DIA. STANDARD 3”
BOM® 1/4” 99-830-13/8" 99-1272
5/16" 99-769
Magna-Lok® 3/8" 99-3318
C6L® 1/4” 99-25645/16" 99-99-2453/8" 99-100-245
Magna-Grip® 1/4" 99-129099-3207
5/16" 99-14393/8" 99-1440
nose assemblies for Model 256 & 2580
HYDRAULIC TOOL
The Model 2580 is a lightweight tool designed for use in a wide range of high-speed production applications. With only one moving part, the tool provides for increased reliability and requires mini-mal maintenance. An offset piston design allows the Model 2580 to easily fit in limited clearance applications.
Byler Part #:5912580
PNEUDRAULIC TOOL
The Model 256 tool is designed for high-speed production applications, able to install up to 20 fasteners per minute. It features a concentric (inline) pull piston and new front gland design, allowing for easy piston removal & increased seal life, which adds to its durability.
Byler Part #:591256
Fill Bottle #:693120337
TOOL SPECIFICATION
Sets: 3/16", 1/4", 5/16" & 3/8" Huck bolts & fasteners in all alloysWeight: 11.1 lbs without nose assemblyReq. Air Pressure: 90-100 psiStroke: 1.026"Pull Capacity: 9986 lbs Fluid: Automatic Transmission Fluid DEXTRON III® or equivalent
TOOL SPECIFICATION
Sets: 3/16", 1/4", 5/16" & 3/8" Huck bolts & fasteners in all alloysWeight: 6.8 lbs without nose assemblyStroke: .940"Pull Pressure: 7400 psiPull Capacity: 8240 lbs
Fluid: Automatic Transmission Fluid DEXTRON III® or equivalent
940 RIG The Model 940 POWERIG® is a portable unit sized for moder-ate production and repair applications. Choice of 115 or 220 Volt AC power, single phase. Has adjustable hydraulic outputs and quick-connect couplers for connecting installation tool hoses.
Operates: 1 tool onlyFlow Rate: .3 GPMPower: Electric: 115 or 220 volts, single phaseWeight: 75 lbs, operational; 66 lbs without fluidLength: 12.5" L x 10.5" W x 18" H
918 RIG The Model 918 POWERIG® is the largest hydraulic unit of-fered by HUCK. Sized for high production applications the unit can operate up to two tools independently. A 22-gallon reservoir stores hydraulic fluid, with a filter-strainer in the suction line to assure clean, filtered fluid. This electrically powered model also delivers sufficient power to operate the tools up to 100 feet away.
Flow Rate: 2 GPMPower: Electric: 220, 440 or 550 volts, 3 phaseWeight: 708 lbs, operational; 585 lbs without fluidLength: 44" L x 25" W x 30" H
Also Available: 918(-5) RIG operates up to 3 tools Part # 5919185
hydraulic poWeriGs® for Model 2580
hydraulic hose assembliesPART # LENGTH
59311830912 12 ft59311830926 26 ft59311830938 38 ft59311830952 52 ft Part # 591918
Part # 591940
Model 256
#1seller
Model 2580 Sets 5/16 & 3/8 Huck Fasteners!
hUCK® ToolinG
Fill Tool #:1124665
Stall Nut #:120824
protect Your investment! In-line Air Regulators are highly recommended for ALL AIR & PNEUDRAULIC TOOLS. They maintain continuous air pressure at the tool. Part #: 6001100
Tel: 800-325-3147 or 972-986-6792
62
nose assemblies for 202 , 2022 & 2024FASTENERS DIA. STANDARD 3” LONG 6”
Magna-Grip® 3/16" 592991456 592991457592993201 592993202
C6L® 3/16" 592993003
N/AMagna-Lok® 3/16" 592993300592993003*
1/4" 592993301592993305* 592993306*
3/16” & 1/4” 592993487 N/A
LEGEND* Replaceable Anvil** Countersunk Avail.*** Button Head Avail.° Available in 3/32", 1/8" & 5/32"§ Available in 1/8", 5/32"
PNEUDRAULIC TOOL
The Model 2024 is the workhorse of the Huck 2000 Series. It combines added stroke & increased pulling capacity to handle most jobs using up to 1/4" blind fasteners & two piece bolts. It is designed to pull 1/4" HuckLok in one stroke.
Byler Part #: 5912024
PNEUDRAULIC TOOL
The Model 202 is a lightweight, high-speed tool. Suited for both production and maintenance repair where 3/16" Huck Bolts & 1/4" and smaller blind diameter fasteners are used.
The 202 features an in-line piston for production rates of up to 35 installations per minute. The 202's ergonomically designed handle and light weight combine to minimize operator fatigue.
Byler Part #: 591202
PNEUDRAULIC TOOL
The Model 2022 is a lightweight, high-speed tool. Suited for both production and maintenance/repair where 3/16" Huck Bolts & 1/4" and smaller blind diameter fasteners are used. Ergonomically designed handle.
Byler Part #: 5912022
PNEUDRAULIC TOOL
The Model 2015 is a lightweight, high-speed tool that features an in-line piston for one-stroke installa-tions of up to 35 cycles per minute. Ergonomically designed handle. Anvil inserts for nail-type rivets can be easily changed out to accommodate various sizes. The tool's nose diameter of .78" makes it ideal for close clearance applications.
Byler Part #: 5912015
TOOL SPECIFICATION
Sets: 3/16" & 1/4" Magna-Lok, Magna-Bulb, Auto-Bulb, 3/16" Magna-Grip & C6L / 120L Weight: 5.1 lbs without nose assembly Req. Air Pressure: 90-100 psiStroke: .750"Hydraulic Fluid: Automatic Transmission Fluid DEXTRON II® or equivalentPull Capacity: 3889 lbs Options: 202B - with pintail collection bottle202V - with vacuum assist pintail collection bottle202L - with extended piston202LV - with vacuum & extended piston
TOOL SPECIFICATION
Sets: 3/16" & 1/4" Magna-Lok, Magna-Bulb, Auto-Bulb, 3/16" Magna-Grip & C6L / 120L Weight: 5.4 lbs Req. Air Pressure: 90-100 psiStroke: 1.026"Pull Capacity: 3889 lbs Options: 2022B - with pintail collection bottle2022V - with vacuum assist pintail collection bottle2022L - with extended piston2022LV - with vacuum & extended piston
TOOL SPECIFICATION
Sets: 3/16" Huckbolts; 3/16" & 1/4" Magnalok; 3/16" & 1/4" HuckLokWeight: 5.5 lbs Req. Air Pressure: 90-100 psiStroke: .850"Capacity: 3993 lbs @ 90 psiOptions: 2024L - with extended piston
TOOL SPECIFICATION
Sets: 3/16" & 1/4" Magna-Lok, Magna-Bulb & Auto-BulbWeight: 5.6 lbs Req. Air Pressure: 90-100 psiStroke: .683"Capacity: 90 psiOptions: Nose Inserts 125154 & 125155 are furnished with tool; others sold separately.
Model 202
Model 2022
Model 2024
Model 2015
nose inserts for 2015FASTENERS DIA. INSERT
Auto-Lock®, Auto-Clamp® & Auto-Bulb® 3/16" 59125154
Magna-Lok® & Magna-Bulb® 3/16" 59125154**
Magna-Tite® 3/16" 59125280**1/4" 59125282***
Grip-Rite® 3/16" 59125154 °Stronghold®
3/16" 59125283 §Peel®
1/4" 59125184
hUCK® ToolinG
Tel: 800-325-3147 or 972-986-6792
63
avdel® ToolinG
Genesis® nG series
lockbolt riveting
speed fastening7537®
The 7537 tool is a lightweight, yet tough and durable pneudraulic hand tool to fit the standard range of Avdel speed fasteners. The 7537 has a variety of options including the ability to be suspended to ensure your requirements are met.
Byler Part #: 50107537
753®
The 753 tool is a high performance, hydro- pneumatic hand tool in heavy duty plastic, designed for rapid, blind side installation of Avdel Speed Fastening® System. It sets the whole range of Avdel speed fasteners. This tool can set up to 1500 fasteners per hour with the ability to work in hard to reach areas.
Byler Part #: 50107530
722®
Designed to place up to 3/8" Lockbolts and collars. Ideal for batch or flow-line assembly. Cast aluminum body for durability. Nose Assemblies required to pull specific fasteners (sold separately).
Byler Part #: 50107220
Tool Specifications:Sets: standard range of Avdel speed fastenersWeight: 4.85 lbs.Stroke: 1.18"Air Pressure: 80-100 psiCycle Time: 1 secondNote: Mandrel, Spring & Nose Equipment Required to set these fasteners.
Benefits of the nG® Series• Reduces operator fatigue• Ergonomic & Lightweight
• Reduces setting times • Quick release nose assembly• Places a wide range of fasteners
nG1® & nG2®
The nG1 & nG2 tools are some of the lightest tools in the Genesis range. With it's quick cycle time and ability to install a variety of rivets, these tools offer invaluablemulti-functionality while maintaining ease of use. Available with a variety of nose pieces.
nG1: 5017120302000nG2: 5017121302000
nG3® & nG4®
The nG3 & nG4 tool allows the placement of a large range of breakstem rivets, lockbolts and sealing plug sizes. It is lightweight with a soft touch rubber grip reducing operator fatigue while its toughened body gives the tool an enhanced life span.
nG3: 5017122402000nG4: 5017123402000
nG2®
Sets: 3/16" breakstem rivets, all alloys; Avseal II® plug up to 7mmWeight: 4.37 lbsStroke: 0.67”Pull Force: 2100 lbfAir Pressure: 80-100 psiCycle Time: 0.8 sec
nG4®
Sets: up to 1/4" breakstem rivets, all alloys including 3/16" & 1/4" lockbolts Avseal II® plug up to 12mmWeight: 5.03 lbsStroke: 0.67”Pull Force: 4200 lbfAir Pressure: 80-100 psiCycle Time: 1.2 sec
.
Tool Specifications:
nG3®
Sets: up to 1/4" breakstem rivets, all alloys; Avseal II® plug up to 9mmWeight: 4.95 lbs without nose equip.Stroke: 1.02"Pull Force: 2900 lbfAir Pressure: 80-100 psiCycle Time: 1.2 sec
Nose Assembly: (determined by fastener being set - must specify at time of order.)
Tool Specifications:Sets: aluminum, steel & stainless steel LockboltsWeight: 11lbs without nose equipmentStroke: 0.75"Pull Force: 6000 lbfAir Pressure: 80-100 psiCycle Time: 3 second
Tool Specifications:Sets: standard range of Avdel speed fastenersWeight: 1.2 kg (pistol only)Stroke: 1.18"Air Pressure: 80-100 psiCycle Time: 1 secondNote: Mandrel, Spring & Nose Equipment Required to set these fasteners.
Tool Specifications:
nG1®
Sets: 3/16" aluminum rivets; up to 5/32" steel rivetsWeight: 3.31 lbsStroke: 0.55"Pull Force: 1350 lbfAir Pressure: 80-100 psiCycle Time: 0.9 secNose Assembly: (determined by fastener being set - must specify at time of order.)
Tel: 800-325-3147 or 972-986-6792
64
Gesipa® ToolinG
accubird®
The AccuBird® is a cordless, battery operated blind rivet installation tool. Nosetips for 3/32”, 1/8”, 5/32” and 3/16” diameter rivets are housed within the tool along with an integral wrench for quick setup changes. Sets: 3/32” to 3/16” diameter rivets.
Tool Specifications:Sets: 3/32” to 3/16” diameter rivetsWeight: 4.8 lbsRecharge: one hourStroke: .79”Traction Power: 1900 lb Includes: 12 volt battery pack, 110v/50Hz battery charger, 4 nosepieces &
a heavy duty steel carrying caseOptions: Extra length nosepieces & additional power packs available.
powerbird®
The PowerBird® is a cordless, battery operated blind rivet tool that pulls 3/16” rivets & 9/32” bulb-tites. Its 2900 lbs of setting force enable it to install up to 1/4” rivets in all materials, including structural blind rivets.
Comes complete with two 3/16" & two 1/4" nose pieces. To set 9/32" Bulb-tites, the following parts are needed: RV8840-B9 Part #: 4972509RVA173 Adapter Part #: 497173
Tool Specifications:Sets: 3/16” & 1/4” rivets, 9/32” bulb-tites Weight: 4.8 lbsRecharge: one hourStroke: .79”Traction Power: 2900 lbIncludes: 12 volt battery pack, 110v/50Hz battery charger, 4 nosepieces & a heavy duty steel carrying caseOptions: Additional power packs available.
BENEFITS OF ACCUBIRD® & POWERBIRD®
portable installation Tools • Cordless • Battery Operated
ph2000®
The PH2000’s composite construction provides high power & low overall tool weight. The integrated vacuum and spent mandrel collection system eliminate mandrel debris. It can also be set up for use with Bulb-tite Rivets
Taurus® seriesThe Taurus tools come in four different sizes with power & stroke optimized for a wide range of rivet applications. Taurus’ improved jaw system further increases jaw traction and extends jaw life to reduce maintenance.
Taurus 1 Part #: 5817560001Taurus 2 Part #: 5817590023Taurus 3 Part #: 5817580010Taurus 4 Part #: 5817590001
• Reliable• powerful
Tool Specifications:
Taurus 1Sets: 1/8” all materials & 5/32” aluminum/steelWeight: 2.87 lbsPulling strength: 1150 lbs. @ 90 PsiWorking stroke: .590"Operating Air Pressure: 90 psi
Taurus 3Sets: up to 1/4” rivets all materialsWeight: 4.19 lbsPulling strength: 3900 lbs. @ 90 PsiWorking stroke: .984"Operating Air Pressure: 90 psi
pneumatic/hydraulic ToolTool Specifications:Sets: Up to 1/4” in all materials Weight: 4 lbsPulling Strength: 3525 lb @ 90 psiOperating Air Pressure: 85-115 psiStroke: .875”
hydro-pneumatic riveting Tools Benefits of Taurus® Series • Cushioned Grip• Cost effective
• Low Operator Fatigue• Quiet Operation
Taurus 2Sets: up to 3/16” blind rivets all materialsWeight: 3.75 lbsPulling strength: 2500 lbs. @ 90 PsiWorking stroke: .709"Operating Air Pressure: 90 psi
Taurus 4Sets: up to 1/4” structural blind rivetsWeight: 4.4 lbsPulling strength: 5500 lbs. @ 90 PsiWorking stroke: .750"Operating Air Pressure: 90 psi
• Reduced maintenance• 3-jaw Traction Systems
• Safe
Byler Part #: 581000
Byler Part #: 581001
Byler Part #: 5812000
Tel: 800-325-3147 or 972-986-6792
65
Gesipa® ToolinG
“shavehead” Tools
Electric ToolThe 74G is the newest Electric Powered Bulb-tite installation tool designed for Metal Building Construction applications. It replaces the RV73G. Pulling head sold separately.
Byler Part #: 497039
bulb-Tite Tooling
rv8840Bulb-Tite Pulling Head
Designed for use with RV74G & RV28G. The RV8840 series pulling heads set all Bulb-tite head styles except RV6602.
RV8840 Bulb-Tite Pulling Heads Specify Bulb-Tite diameter when ordering to determine part #:DIA. PART # DESCRIPTION 5/32” 4972505 for use with 5/32” rivets3/16” 4972506 for use with 3/16” rivets1/4” 4972508 for use with 1/4” rivets9/32” 4972509 for use with 9/32” rivets
Length: 6.5"
hs310Rivet Head Shavers
The shaving tool attaches to standard drills to shave and finish the heads on the RV6607 series of shaveable aluminum Bulb-tite rivets.
RV57 Mandrel TrimmerThe RV57 Trimmer is designed to trim excess shavehead mandrels. Byler Part #: 497601
24RE Bulbtite Removal ToolThe 24RE is designed to remove aluminum 9/32" (only) Bulb-tite rivets. Byler Part #: 497642
Manual Tools
pulling heads
Cutter Tips 5B = # 492455 6B = # 5931243516S = # 49263310
snip shaved
hn-2The HN-2 is designed for comfort, safety and utility. The lever and gear design reduces physical strength required for all rivet sizes. The HN-2 has a spent mandrel collection system which swivels for easy removal
Byler Part #: 581002
flipperThe Flipper has a unique ratcheting mecha-nism that reduces setting effort by 40%. Its ergonomic handles feature cushioned rubber grips. The mandrel collector also houses additional nose tips and wrench for easy changeover.
Byler Part #: 581003
sn-2The SN-2 Lazy Tong Manual Riveting Toolhas a slim design for hard to reach rivet-ing applications. The lattice levering system reduces operator fatigue.
Byler Part #: 5810021
Tool Specifications: Sets: up to 3/16” aluminum/steel rivetsWeight: 1.6 lbs. Length: 8.35” Stroke: total: .638” single action: .070”
Tool Specifications: Sets: up to 1/4” rivets all materialsWeight: 4.6 lbs. Length: 11.625” (Closed) 32.75” (Opened) Stroke: .433”
Tool Specifications: Sets: up to 1/4” rivets all materialsStroke: .394” Note: To set 9/32" Bulb-tites, the following parts are needed:
RV8840-B9 Part #: 4972509RVA173 Adapter Part #: 497173
Tool Specifications: Sets: 5/32”, 3/16”, 1/4” & 9/32” Bulb-tite rivetsWeight: 6.5 lbs. with pulling head attachedLength: 14” without pulling head, 18” with pulling headTraction Power: 3,000 lbsWorking Stroke: Continuous reciprocating .375” per cycle
Shaving Tools: HEAD PART # DESCRIPTION 5B 497608 for use with 5/32” rivets6B 497609 for use with 3/16” & 1/4” rivets 6S 497612 for use with 1/4” rivets
with 5/8” head dia. *NEW*
rv74G
HS310
RV74-EXT Pulling Head Extension
Byler Part #: 497074
RV74G
Weight: 4 lbs. Length: 22”
Tel: 800-325-3147 or 972-986-6792
66
pop® riveT ToolinG
prG540The Model PRG 540 is an extremely strong, robust and reliable heavy duty pneumatic-hydraulic rivet tool. Its low cost & proven reliability make it our #1 seller for blind rivet installation. Comes complete to pull 3/16" & 1/4" diameter rivets. Includes jaws, nosetips & jaw pusher.
Byler Part #: 5707540
Tool Specifications:Sets: POP®'s full range of blind fasteners from 3/32” to 1/4” in all alloysRequired Air Pressure: 85 psi maximumStroke: .687"Weight: 4.85 lbsDimensions: 7-1/2” L, 11-3/16” H, 4-3/4” Base Dia.Available with either a deflector (PRG) or Mandrel Collection System (MCS)
prG510The Model PRG 510 is a simple, effective, and compact pneumatic rivet tool that is strong and trouble-free for continuous high-production riveting. Comes complete to pull 1/8", 5/32" & 3/16" diameter rivets. Includes jaws, nosetips & jaw pusher.
Byler Part #: 5707510
Tool Specifications:Sets: 3/32" to 5/32" stainless steel
pulls POP®'s full range of blind fasteners from 3/32” to 3/16” in aluminum *does NOT pull 3/16" all steel
Required Air Pressure: 85 psiWeight: 4 lbsOptions: Extended nose housing available (Model PRG 511).Available with either a deflector (PRG) or Mandrel Collection System (MCS)
5800 riveterIdeal for site and maintenance work, the high-capacity, rechargeable battery tool MCS 5800 (for use without access to compressed air) is constructed to withstand industrial conditions. Sets up to 1900 rivets before recharging and can be recharged in just an hour. Supplied with steel carry case & charger.
Byler Part #: 57075800
Tool Specifications:Sets: POP®'s full range of blind fasteners from 3/32” to 3/16” in all alloys Stroke: .800”Weight: 4.85 lbsIncludes: four interchangeable nosepieces & integral wrench, charger & batteryRecharge: one hourOptions: Spare battery pack available # 5707500040
#1seller
Manual riveters ps45The PS45 Heavy Duty Lever Rivet Tool is heavy duty with robust steel construction. Its two-position telescopic levers extend to maximize leverage and pulling force & non-extended position makes tool more compact.
Byler Part #: 570745
Tool Specifications: Sets: rivets 1/4” diameter including high strengthLength: 19.3”, 26.2” extendedWeight: 5.7 lbsNosepieces included: 1/8”, 5/32”, 3/16” & 1/4” rivetsIncludes: nosepiece wrench & integral removal mandrel collector.
ps15The PS15 is a Professional Hand Plier Rivet Tool with robust aluminum casting and vanadium steel handle design & contoured handle grips for comfort. Rivet retaining handle design for one-handed riveting.
Byler Part #: 5707155
Tool Specifications: Setting capacity: aluminum rivets up to 3/16” Nosepieces included: 3/32”, 1/8”, 5/32” & 3/16” rivets Includes: nosepiece wrench
BENEFITS OF PRG540 & PRG510 • proven Reliability • Durable• Low cost
air riveters
Cordless riveter
• production quality• Lightweight
Ask your Byler Sales Representative about POP
Tooling Rentals!
TOOLINGFOR RENT
protect Your investment! In-line Air Regulators are highly recommended for ALL AIR & PNEUDRAULIC TOOLS. Air regulators are in stock. They maintain continuous air pressure at the tool. Part #: 6001100
Jaw Lube Part #: 5707510130
Tel: 800-325-3147 or 972-986-6792
67
pop® riveT ToolinG
rivet presenter®
The RP4, RP5 & RP6 Rivet Presenters allow your operators to spend more time building quality assemblies and less time handling rivets!
*POP® Rivet Presenters must have a specified receptacle for each size of rivet. Ask your Byler Rivet Salesman for the correct receptacle part number.
Byler Part #: 5707181604
proset® rivetersBENEFITS OF PROSET® SERIES RIVETERS
Ergonomic• Lightweight polymer construction• Comfortable two finger, low activation force trigger• Directionable air exhaust
Performance • Quick disconnect nose housing • Quick disconnect jaw case • Quick disconnect Mandrel Collector
Tool Specifications: Sets: RP4 sets 1/8" POP® rivets
RP5 sets 5/32" POP® rivetsRP6 sets 3/16" POP® rivets
Pulling force: 1700 Ibs. at 85 psiAir pressure: 85 psi Stroke: .63” Pulling head dimensions: 8.75” L x 1.75” W x 2.62” HRivet Feeders: Rate 60 rivets per minute.Mandrel Collectors: Capacity 8500 mandrels approx.
3400The lightweight ProSet® 3400 Rivet Tool is the heavyweight of the ProSet® family, it features many innovative high performance features including a patented “Quick Disconnect” nose housing and jaw case for rapid cleaning and maintenance of the front end without the need for any tools.
Byler Part #: 57073400
1600The ProSet® 1600, designed for small diameter rivets, has a compact design & its rounded grip. It is able to maneuver in tight spaces & will keep production lines running at full speed.
Byler Part #: 57071600
2500The ProSet® 2500 tool features many innovative high performance features including a patented “Quick Disconnect” nose housing and jaw case for rapid cleaning and maintenance of the front end without the need for any tools. Sets up to 3/16" blind rivets.
Byler Part #: 57072500
Topseller
Tool Specifications:
Sets: a wide range of blind rivets, including 1/4” structural high strength and stainless steel.Required Air Pressure: 90 psiStroke: 1.02” Weight: 4.41 lbs. Dimensions: Height 12.44” x Length 13.15” Options: Also available with Mandrel Collection System (MCS)
Tool Specifications:
Sets: 1/8” thru 3/16” high strength & stainless steel blind rivets; 3/16” Ultra-grips in all alloys
Stroke: .71” Weight: 2.65 lbs.Options: Also available with Mandrel Collection System (MCS)
Tool Specifications:
Sets: 2.0 mm Micro Rivets, 3/32” and 1/8” diameter rivets in all materials and up to 5/32” all steel open end rivets.Stroke: .71”Weight: 2.15 lbs. Options: Also available with Mandrel Collection System (MCS)
We Repair POP®
Tooling in House!
Quick Disconnect: Nose Housing, Jaw Guide & Mandrel Collection SystemThe ProSet® series simplifies routine maintenance & cleaning. Front end components can be quickly serviced, eliminating costly downtime.
1. 2. 3.
Make sure MCS System is turned off prior to applying jaw lube.
Jaw Lube Part #: 5707510130
In-line Air Regulator Part #: 6001100
All Proset® Mcs Tools Offer The Following Features:
We Recommend:
Tel: 800-325-3147 or 972-986-6792
68
Threaded inserTs ToolinGpneumatic Tools
pnT1000l-pCThe PNT1000L-PC is a heavy-duty spin-pull to pressure POP NUT tool. It features a push to thread on mandrel, an auto adjust stroke as the material thickness varies, quick release mandrel system, one step trigger and a reverse override button. This heavy duty tool is designed to set larger size blind rivet nuts from 1/4-20 to 1/2-13 (M6 to M12)
Byler Part #: 57971000
pnT800l-pC smartset®
The PNT800L-PC is a spin-pull to pressure POP NUT tool that can install the full thread size range of the TK, TL, and TH products. It features a push to thread on mandrel, and an auto adjust stroke as the material thickness varies. The PNT800L-PC also features a quick release mandrel system, one step trigger and reverse override button.
Byler Part #: 5707800
fleX ToolOne tool with Pull to Pressue & Pull to Stroke Capabilities.
The all aluminum Flex tools have a quick-change mandrel design, single stage trigger, push to start nose piece to spin on fastener, and is upgradeable to process monitoring.Flex-5P = Pull to Pressure Byler Part #: 0201500Flex-5S = Pull to Stroke Byler Part #: 02015001
Installs: 20 parts per minuteWeight: 6.1 lbsStroke: .05 - .413 lbsPull Force: 6,550 lbf @ 87 psiPressure: 72.5 - 87 psiSets Inserts: 1/4-1/2; M6-M12
Tool Specifications:
Installs: 20 parts per minuteWeight: 4 lbsStroke: .05 - .335 lbsPull Force: 4,590 lbf @ 87 psiPressure: 72.5 - 87 psiSets Inserts: 8-32-3/8; M4-M10
Tool Specifications:
Weight: 4.2 lbsStroke: .276 inchPull Force: 5,000 lbf @ 90 psiMotor Speed On: 1,500 rpmMotor Speed Off: 2,000 rpmCycle Time: 2-3 secSets Inserts: 4-40-3/8-16; M3-M10
Tool Specifications:
Pilot Nosepiece(Thinwall)
Flat Nosepiece(Thickwall)
Nosepiece styles available for PNT1000L-PC and PNT800L-PC
ssG series aro seriesspin-spin Tools
Both tools have a quick-change nose assembly allowing head replacement with no additional tools.
Sets the following:
AL/CAL AR/CPB AT/CFT RN/AOCA/CAO
AK/CAK AS AW/CFW AH/CAH
Sets the following:
TL TK TH
Sets the following:
TL TK TH
CAL CPB CFW CAHCAK CFT CA/CAO
Sets the following: Installs Riv-Floats®
Conversion kits required to change 5P to 5S & 5S to 5P
TL TK TH ST
Tel: 800-325-3147 or 972-986-6792
69
Threaded inserTs ToolinG
Installs Riv-Floats®
Kits
hand ToolspnT210
Manual ratchet Tool KitsThe PNT210 is a heavy-duty ratchet styled tool and can install the full range of POP NUT® fasteners in all thread sizes.The 210 tool is featured with a stroke control gauge and setting function.
pnT310level Tool Kit w/plunger
The PNT310 is a double lever tool with a pull-to-remove plunger. The 310 is designed to install the full range of POP NUT® products. The 310 tool is featured with a stroke control gauge.
aa112hi-Torquer Tool
Sets Inserts: 4-40 to 1/4-20 M3 to M10
aa170plier Tool
Sets Inserts: 6-32 to 3/8-16 M4 to M10
Knurled BodyPNT310-IPPNT310-MP
Smooth BodyPNT310-IPNT310-M
Mandrels
Included!
Sets Inserts: 10-24, 10-32, 1/4-20, 5/16-18 & 3/8-16 M5, M6, M8, M10 & M12
Optional: 6-32, 8-32, 1/2-13(Mandrel & nose pieces sold seperately)
(Mandrel & nose pieces included)
Knurled Body PNT210-IPPNT210-MP
Smooth Body PNT210-IPNT210-M
Sets Inserts: 10-24, 10-32, 1/4-20, 5/16-18 & 3/8-16 M6, M8, M10 & M12
STTL TK TH
AWAT AL AK
STTL TK TH
Byler Part #: 0202202
lhf 202 imperial insert Tool with set-ups
Contains Imperial Tool designed to install any rivet nut and includes set-ups for 8-32, 10-24, 1/4-20, 5/16-18, 3/8-16, and 1/2-13.
Byler Part #: 02022292
Kit 2292 Master assortment Kit
Contains AA170 plier tool and 250 pieces of the AL Series: 6-32 to 3/8-16 UNC.
ALByler Part #: 02022293
Kit 2293Metric Master assortment Kit
Contains AA170 plier tool and 200 pieces of the AL Series: M4 to M10 ISO.
Manual/expendable ToolsC845
Sets: Rivnut®
rnhT
Sets Inserts: 6-32 to 3/8-16 M3 to M10
aa181 aa916
Sets Inserts: 6-32 to 1/2-13 M4 to M12
Sets Inserts: 4-40 to 1/2-13 M3 to M12
C722
Sets: Rivnut®
Conversion Kits Available!
Byler Part #: 02022021
lhf 202MMetric insert Tool with set-ups
Contains Metric Tool designed to install any rivet nut and includes set-ups for M4, M5, M6, M8, M10, and M12.
Byler Part #: 5534501
Kit 34501 Thread setter Kit
Contains the 39200 thread-setter tool and includes mandrels and nosepieces for 6-32, 8-32, 10-24 sizes and a mandrel for 1/4-20. The kit also includes 103 assorted Rivet-nuts and Poly-nuts, instructions and wrench.
Pilot Nosepiece Flat Nosepiece
Other Kits Available!
Tel: 800-325-3147 or 972-986-6792
70
ChiCaGo pneUMaTiC ToolinGCp714
The CP714 is an air hammer for professionals who want the best. This is the most controllable CP Hammer available has a extra sensitive tease throttle because of its spool valve which controls starts and stops.
Byler Part # 6021010714
Cp717The CP717 is a Super Duty Air Hammer and is the most powerful air hammer available for automotive, truck and off road equipment. Extra large .498 shank for heavy duty applications. Positive action trigger for precise control.
Byler Part # 6021010717
Cp785The CP785 3/8” Standard Duty air drill features a powerful energy-efficient air motor to resist stalls. Ideal for accessory and air conditioner installation, engine work and auto body repair.
Byler Part # 6021020785
air hammers
Tool Specifications:Average Air Consumption: 4 cfmFree Speed: 2,400 rpmMin. Hose Size: 3/8” Chuck Size: 3/8”
Tool Specifications:Shank Opening: .401Average Air Consumption: 2.13 cfmBore Diameter: 9/16”Piston Stroke: 3-1/8”
air drill
impact Wrenches
Premium high-performance sockets combine strength, durability, looks and top quality. From tough, chrome-moly steel construction to the laser-etched, easy-to-read socket size, these are the only impact sockets you'll ever need.
s8008d impact socket set
Byler Part # 6025113281
Cp734hThis Chicago Pneumatic 1/2” heavy-duty air impact wrench with Dyna-Pact oil bath clutch to deliver smooth operation and extended durability. Delivers power and economy for general repair, transmission work, exhaust systems and body shops.
Byler Part # 60210307341
Tool Specifications: Drive: 1/2”Average Air Consumption: 3 .75 cfmFree Speed: 8,400 rpmStandard Bolt Capacity: 9/16”Working Torque: 25 - 310
Weight: 5.13 lbs Max Torque(ft.-lb.): 425Inlet Size: 1/4”
Cp7775-6This heavy-duty air impact wrench delivers awesome torque, yet is lightweight for less operator fatigue. Has 6in. anvil for extra reach. Perfect for tire work.
Byler Part # 60210377756
Tool Specifications: Drive: 1”Average Air Consumption: 8.75 cfmFree Speed: 5,500 rpmWeight: 25 lbsWorking Torque: 100 - 1200
Blows Per Minute: 750Max Torque(ft.-lb.): 1,550Inlet Size: 1/2”
Drive: 1”SAE Socket Size: 7/8”, 15/16”, 1”, 1 1/16”, 1 1/8”, 1 3/16”, 1 1/4”, 1 1/2”Material Type: Chrome Molybdenum Steel
Tool Specifications:
Chicago Pneumatic CP7300RQC 1/4” Reversible Mini Drill w/ Keyless Chuck. Excellent precision to allow for very slow startup and control throughout the drilling process.
Byler Part # 60210273001
Cp7300rQCAverage air consumption: 4.1 cfmFree Speed: 2700 rpmMin. Hose Size: 4.1 cfmChuck Size: 1/4”
Tool Specifications:
Min. Hose Size: 3/8” Weight: 3.3 lbsAir Inlet: 1/4” NPTF
Tool Specifications:Shank Opening: .498Average Air Consumption: 3 cfmBore Diameter: 3/4”Piston Stroke: 2-11/16”
Min. Hose Size: 3/8” Weight: 4.75 lbsAir Inlet: 1/4” NPTF
Weight: 2.25 lbsAir Inlet: 1/4” NPTF
Weight: 1.35 lbsAir Inlet: 1/4” NPTF
1. Front end work2. Bushing removal
3. Installation of walking beams4. Removal of truck springs
Ideal For:
Tel: 800-325-3147 or 972-986-6792
Fraction Decimal mm Fraction Decimal mm1/64 .015625 .3969 33/64 .515625 13.0969
1/32 .031250 .7938 17/32 .531250 13.4938
3/64 .046875 1.1906 35/64 .546875 13.8906
1/16 .062500 1.5875 9/16 .562500 14.2875
5/64 .078125 1.9844 37/64 .578125 14.6844
3/32 .093750 2.3812 19/32 .593750 15.0812
7/64 .109375 2.7781 39/64 .609375 15.4781
1/8 .125000 3.1750 5/8 .625000 15.8750
9/64 .140625 3.5719 41/64 .640625 16.2719
5/32 .156250 3.9688 21/32 .656250 16.6688
11/64 .171875 4.3656 43/64 .671875 17.0656
3/16 .187500 4.7625 11/16 .687500 17.4625
13/64 .203125 5.1594 45/64 .703125 17.8594
7/32 .218750 5.5562 23/32 .718750 18.2562
15/64 .234375 5.9531 47/64 .734375 18.6531
1/4 .250000 6.3500 3/4 .750000 19.0500
17/64 .265625 6.7469 49/64 .765625 19.4469
9/32 .281250 7.1438 25/32 .781250 19.8437
19/64 .296875 7.5406 51/64 .796875 20.2406
5/16 .312500 7.9375 13/16 .812500 20.6375
21/64 .328125 8.3344 53/64 .828125 21.0344
11/32 .343750 8.7312 27/32 .843750 21.4312
23/64 .359375 9.1281 55/64 .859375 21.8281
3/8 .375000 9.5250 7/8 .875000 22.2250
25/64 .390625 9.9219 57/64 .890625 22.6219
13/32 .406250 10.3188 29/32 .906250 23.0188
27/64 .421875 10.7156 59/64 .921875 23.4156
7/16 .437500 11.1125 15/16 .937500 23.8125
29/64 .453125 11.5094 61/64 .953125 24.2094
15/32 .468750 11.9062 31/32 .968750 24.6062
31/64 .484375 12.3031 63/64 .984375 25.0031
1/2 .500000 12.7000 1 1.000000 25.4000
No. of Gauge
Aluminum(B&S)
Steel(U.S. Std.)
10 .1019 .134511 .0907 .119612 .0808 .104613 .0720 .089714 .0641 .074715 .0571 .067316 .0508 .059817 .0453 .053818 .0403 .047819 .0359 .041820 .0320 .035921 .0285 .032922 .0253 .029923 .0226 .026924 .0201 .023925 .0179 .020926 .0156 .017927 .0142 .016428 .0126 .014929 .0113 .013530 .0100 .0120
Inch-Metric Conversion Table Decimal Equivalents of Standard Sheet Gauges
Inches Inches Thickness in Thousandths
Pounds to Kilograms Conversion
Kilograms to Pounds Conversion
Number of LBS x .4536 = Kilograms
Number of Kilograms / .4536 = Pounds
Conversion CharTs
TOOLINGFOR RENT
Authorized Tool Repair & Warranty Center
Byler Rivet’s factory trained technicians are certified to repair pneudraulic, air and hydraulic tooling from a variety of manufacturers. Our history of fast turn-around, in-stock parts, technical support, and tool rental options sets us apart from the competition.
At Byler Rivet, our knowledgeable tool staff will walk you through minor repairs over the phone, saving you time and money. You can trust when you send in your tools for service, getting you back into production is our top concern!
TOOL REPAIR SERVICE:
• Rapid Turn-Around On Repairs
• Detailed Quotes provided prior to Service
• Technical Help & Troubleshooting - “Over the Phone”
• Tool Schematics and Charts Available
• Tool Parts and Nose Assemblies Stocked
• Factory Certified Technicians
• Huck, POP, AVK & Avdel Warranty Repair Center
TOOL RENTAL:
Byler Rivet offers tool rentals for people who have small repairs or those who need to keep production running smoothly while their tools are being repaired. We rent Pneudraulic, Air and Hydrualic riveters for all your fastening needs.
ask Us about a Tool rental Today!
ON-LINE TOOL SUPPORT
Byler Rivet keeps you informed by providing technical videos, tool schematics and tool specs at bylerrivet.com to improve your riveting and tooling experience.
• Detailed Tool Charts and Product Specs
• Tool Schematics
• Videos
For technical assistance and help on all your tools contact [email protected]
• Technical Data and Images
• Web Catalog