RPB 2.8V8

STANDARD ENGINE SPECIFICATION> 72° V8 cylinder, 32-valve quad-cam> Steel flat plane crankshaft incorporates a high flow-rate oil system> Twin pump lubrication system> Four scavenge pump dry sump system> Rotary vane coolant pump> Pre engaged starter motor> Belt-driven 45-amp alternator> 45mm eight-throttle body induction system> Re-profiled camshafts> Race ported and polished cylinder heads> High-strength roller cam chains with adjustable sprockets> Heavy duty cylinder studs> Oversized cylinder barrels with Nikasil-bores> High compression pistons> Arrow high-strength forged steel conrods

OPTIONAL ENGINE SPECIFICATION> Billet camshafts and adjustable valve timing> +1mm one-piece stainless steel race valves> Race valve springs and titanium retainers> Race ported and polished cylinder heads with +1mm valve seats> Cosworth high compression two-ring pistons

DIMENSIONS> Length 546mm> Width 513mm> Height 440mm> Dry weight 88kg (194lb)> Max revs 10500rpm> Bore 84mm> Stroke 63mm> Compression ratio 13.5:1

Max Power = 373.95bhp Max Torque = 211.99ft-IbsNote: Power figures quoted above are measured at the rear wheels, using the RPE rolling road.