FG-Elektronik GmbH Mühlweg 30 - 32
D-90607 Rückersdorf
Tel . +49 (0)911 / 57545- 0 Fax +49 (0)911 / 57545- 77
info(at)fg-elektronik.de w w w . f g -e lek t r on i k .de
85
YN
02
- T
ech
nis
ch
e Ä
nd
eru
ng
en
un
d I
rrtü
me
r vo
rbe
ha
lte
n 2
01
2-0
9
Artikel / article Art. - Nr.
order no.
PWM 10A LED-PWM-Dimmer
▶ Dimmung mittels Puls-Weiten-Modulation dimming via Pulse-Width-Modulation
▶ 1-10V Schnittstelle / 1 -10V interface
▶ Doppeltes Möbelzeichen >MM< suitable as a built-in unit for furnitures
▶ Verpolungsschutz reverse voltage protection
Technische Daten PWM 10A / technical data PWM 10A
Eingangsspannung / input voltage 12 - 40VDC
Ausgangsleistung / output power max. 400W
Ausgangsstrom / output current 0 - 10A
Ausgangsspannung / output voltage 12- 40VDC
Schutzmechanismen / protective mechanism Überstromabschaltung / over current protection
Übertemperaturabschaltung / over temperature protection
Art der Ansteuerung / control mode 1-10V Schnittstelle / 1-10V interface
Helligkeitsregelung / brightness control entsprechend Wahrnehmung des menschlichen Auges
according to human eye´s visual perception
PWM 10A ist geeignet für
PWM 10A is suitable for
die Montage in und an Möbeln installation on and in furnitures
den Einbau in der Zwischendecke installation in a suspended ceiling
die Verwendung auf entflammbarem Untergrund the usage on a flammable ground
Abmessung / dimensions 147 x 37 x 21 mm
Schutzart / degree of protection IP20
Gewicht / weight 70g
Interne Schaltfrequenz / internal switching frequency ca. / approx. 250Hz
Umgebungstemperatur / ambient temperature -20° - +50°C
Lagertemperatur / storage temperature -40° - +85°C 85% relative Luftfeuchtigkeit
85% relative humidity
Max. sekundäre Leitungslänge max. secundary cable length
3m
Sicherheitsstandards / safety standards EN 61347-1; EN 61347-2-13
EMV-Standards / EMC standards EN 61547; EN 55015 Class B
EN 61000-4-2, -3, -4, -6, -8
Artikel-Nr. / order no. 85VF01
Made in Germany
mailto:[email protected]://www.fg-elektronik.de
85
YN
02
- T
ech
nis
ch
e Ä
nd
eru
ng
en
un
d I
rrtü
me
r vo
rbe
ha
lte
n 2
01
2-0
9
FG-Elektronik GmbH Mühlweg 30 - 32
D-90607 Rückersdorf
Tel . +49 (0)911 / 57545- 0 Fax +49 (0)911 / 57545- 77
info(at)fg-elektronik.de w w w . f g -e lek t r on i k .de
GEHÄUSEABMESSUNGEN / DIMENSIONS
* Alle Angaben in mm / All stated dimensions in mm
ANSCHLUSS / INTERFACE
SICHERHEITSHINWEIS / SAFETY INDICATION
Bei Einsatz des Produkts im Ausland sind zusätzlich die dort geltenden Vorschriften zu beachten. In case of using the product abroad, the regulations applicable in those countries must also be complied with.
Die Installation des Gerätes sollte durch qualifiziertes, geschultes Fachpersonal erfolgen. The installation of the device should be executed by qualified and trained personnel only.
POTENTIOMETER
ELEKTRONISCHES ELECTRONICAL
INPUT VOLTAGE 12 - 40 VDC
mailto:[email protected]://www.fg-elektronik.de