Oil & Gas Safety FootwearRugged footwear built using traditional methods from the finest materials...
FIT
COMFORT
TRACTION
ANTI-SLIP
CUSHIONED
FLEXIBLE
BALANCE
PERFECT
IntroductionWe have worked closely with leading oil and gas companies to develop a range of industry specific products that are designed by oilmen for oilmen.
We understand your business and the demands that it makes on footwear, so we developed products that are built and tested for safety and comfort in extremes.
safety and comfort in extremes
The RangeContents:
InTROduCTIOn & TeCh
enduRanCe
V12
VR6 POWeRGRIP
2
4
8
14
V-Tech go the extra mile for your safety
Slip Resistance
It is confirmed by the HSE that slips, trips and falls are the most common cause of major injuries at work and 95% of major slips result in broken bones. The cost to employers in the UK is £512 million per year... The human cost is incalculable.
3 KeY FaCTORS that affect slip resistance in footwear are:
1. Sole Compound: We use special blends of Rubber which give extraordinary levels of grip.
2. Tread Pattern: Our soles are designed with maximum floor contact with lots of sharp profiles to cut through contaminant with plenty of channels to disperse liquid.
3. Ladder Grip: We utilise a defined heel buttress and ladder grips to improve safety when working on ladders or steps.
2
as well as exceeding all the requirements of en ISO 20345 we independently test our footwear on surfaces that you commonly encounter such as Kennedy Grating and Scaffold board in line with hSe recommendations ‘Procuring slip-resistant footwear for work’.
TRACTION
ANTI-SLIP
98
756
43
21
Angled area to minimise slip at heel strike
9
Shock absorber8
Defined heel for stability on ladders or scaffolding
7
Large cleats for all terrain5
Areas of abrasion resistant compound to increase durability
6
Large surface contact area with sharp edges to cut through dirt and grime
4
Self-cleaning tread pattern3
Water clearance right to the edge2
Thick cushioned layer for shock absorption
1
Our technical outsoles are the result of extensive research and development with a highly respected British laboratory and have been cleverly designed to provide the greatest slip resistance on the widest range of surfaces possible.
V-Tech soles are designed to help reduce slip incidents in the workplace.
the outsoles
We use special blends of rubber for our soles giving higher heat resistance, superior traction and increased durability.
All our footwear are fitted with replaceable footbeds for comfort and hygiene.the insoles
VS102 energy Return FootbedVS100 dual Shock Footbed
• Sizes 3-13 (36-48) • Twin shock absorbing pods • Contoured for support• Washable • Anti-static • Allow air circulation
• Sizes S-XL 3-14 (36-48)• Rebound technology• Posture stability• Anti-bacterial hygiene• Ventilated airflow• Anti-fatigue• Anti-static
Steel Toe Cap
Composite Toe Cap
Steel Midsole
Composite Midsole
heat Resistant
anti-static
KeY We have inserted technical specification icons which convey information as described below:
There are also 5 unique feature stamps which apply to certain styles:
Waterproof and Breathable
Metal Free Zip SideImpact Resist ankle Protection
Insulated Lining
ZIP SIDE
IMPACT RESIST
ANKLE PROTECTIO
N
3
FIT
COMFORT
TRACTION
ANTI-SLIP
CUSHIONED
FLEXIBLE
BALANCE
PERFECT
5 Bellows Tongue
Prevents ingress of dirt and water.
6 S3 Water Repellant Leather
Downward facing seams for water run off.
4 non Sparking Lace System
To remove danger of sparking.
3 Quick dry Moisture Wicking Lining
For added comfort and improved foot health.
2 Padded ergo Collar
To prevent chafing during ladder work or driving.
1 easy access Zip
Robust side zip with storm flap.
1110
98
7
5
6
4
32
1
4
®
11 Light & Flexible
Utilises the latest components to create a boot that is both light and flexible.
10 Reflective Trim
For visibility in low light conditions.
9 Composite Midsole
For underfoot protection against sharp objects.
8 Multi directional Tread
For liquid dispersal. Designed to allow maximum ground contact.
7 Composite Toe Cap
Tough armour coated anti-scuff toe. This boot is the result of a two year
development programme with leading Oil and Gas companies. Lightweight and flexible, the boot affords the highest levels of comfort and protection. The sole is a special compound that provides outstanding slip resistance on many surfaces including scaffold boards and Kennedy grating.
e1300 defiantBlack high Leg Zip Side BootSizes 3-13 (36-48) S3 SRC
e1300XL Large SizeSizes 14-16 (49-51) S3 SRC
ZIP SIDE
5
w
aterproof
breathable
A handsome waterproof boot built from the best waxed hide. Invincible features a non glint speed lace system and half bellows articulated tongue with easy flex points for comfort. The side of the boot incorporates a panel of D30 impact resistant gel for extra protection. With cut away ergo collar, padded lining and heat resist sole this is a boot with a mission.
e2020 InvincibleBlack hi-Leg Waterproof BootSizes 6-13 (39-48) S3 SRC
ZIP SIDE
IMPACT RESIST
ANKLE PROTECTIO
N
6
FIT
COMFORT
TRACTION
ANTI-SLIP
CUSHIONED
FLEXIBLE
BALANCE
PERFECT
2
2
Tongue
New soft edge quilted tongues.
3
3
non Sparking Lace System
Non sparking composite lace system.
11
Lining
V-Brelle Moisture wicking lining for day long comfort.
5
5
upper
Full Grain Leather are used for tough, supple uppers with good breathability, long life and comfort.
6
6
Toe Cap
Composite Toe Caps: Fibreglass wide fitting toe caps are used throughout the range to reduce weight and provide perfect balance.
44 Stitching
Quadruple stitched vamp for extra strength.
9
10
11
8
7
10
A new introduction to our very popular VR6 range. A great alternative to the traditional rigger with its quick on/off zip and supportive lace system. The high bellows tongue keeps out dirt and is padded for comfort.
Black high Leg Zip Side BootSizes 5-13 (38-48) S3 SRC
VR695 Leopard
9 heel breast Ladder Grip
Defined heel breast for stability on ladders.
10 heel
Leather back stay to strengthen back of boot and prevent collapse.
11 Back
Ergonomic collar, for comfort when driving or climbing ladders.
8 Shank
The integral shank ensures that the VR6 flexes where it should at the joint of the foot.
7 Midsole
Flexible steel or composite midsoles in all VR6 styles as marked.
ZIP SIDE
get to grips with VR6
11
www.vtechfootwear.com
Engineered Protection for the Oilfield Industry - Brought to India by Project Sales Corp
[email protected]+91-98851-49412