Production of the Inlay
The first process was to cut outthe image I wanted to use as Ionly wanted the imagine of thefemale and male actorshugging.
Production of the Inlay
Once I got the correctdimension for the Inlay, I thenmatched the colour of thealbum cover to ensure both arethe same colour.
Production of the Inlay
I then used the image I cut out at the first stage of theproduction and dragged it ontothe base of the inlay.
Production of the Inlay
I then flipped the image soinstead of the picture being onthe right hand side, it wasbased on the left, however,with the artist still lookinginwards.
I did this by stretching thepicture of itself.
Production of the Inlay
I then added the writing andmade sure it fit the albumcover and picture.
I underlined the word ‘hold’because the female artist isholding on to the male. I also wrote the word ‘tear’ inthe trash font to link in with thealbum name.
Production of the Inlay
At the bottom I simply wrote acredit in the same font as themessage but in a smaller font.
Production of the Inlay
After the production process – Final Inlay