REV. N. 00 - 02.2013 - AD LIFEINPIXEL -
pratixcnc machining centres with multifunction aluminium worktable.
SCM GROUP SPA SCMsales offices: via Casale, 450 - 47826 Villa Verucchio, Rimini - Italytel. +39 0541 674111 - fax +39 0541 674274 - [email protected] - www.scmgroup.com
00L0132026E
O3
pratix z2
pratix n
pratix s
pratix z5
pratix tech cyflex
scmpratix“Multifunction” par excellence.
pratix z5cnc machining centre with multifunction aluminium worktable.
• 5 axis• work table with “T”-shaped grooves
pratix z2cnc machining centre with multifunction aluminium worktable.
• 3-4 axis• work table with “T”-shaped grooves
pratix ncnc machining centre with multifunction aluminium worktable.
• 3-4 axis• high performance• loading and unloading automation
pratix scnc machining centre with multifunction aluminium worktable.
• 3 axis• entry level
CYFLEX F900 PRO TOP PLUSCYFLEX H810 PRO MULTITECH PLUS STARTECHPRATIX Z5page 04
PRATIX Z2page 06
PRATIX N page 08
PRATIX Spage 10
TECH Z5
semi-automatic boring machines
O5pratix z5 “Top-of-the-range” for those who consider flexibility as a way of life.
5 AXIS CNC MACHINING CENTRE WITH MULTIFUCTION ALUMINIUM TABLE
PRATIX Z5
Z5-31 Z5-52
Axes
Working area along X-Y-Z axes mm 3110 - 1550 - 160 5200 - 1550 - 160
Panel length along Y axis mm 1550 1550
Panel length (for alternated work process) mm 1390 2460
Vectorial speed X-Y axes (option) m/min 83 83
Boring head
Vertical spindles up to No. - rpm 18 (10X - 4+4Y) - 6000 18 (10X - 4+4Y) - 6000
Horizontal spindles up to No. - rpm 8 (4X - 4Y) - 6000 8 (4X - 4Y) - 6000
Integrated blade in X Ø mm - rpm 120 - 7500 120 - 7500
Electrospindle
Std motor power (S1) kW (Hp) 11 (15) 11 (15)
Max. speed rpm 21000 21000
Tool changer on the carriage in X (base) places 12 12
Installation
Exhaust air consumption/speed m³/hr - m/sec 5300/30 5300/30
Exhaust outlet diameter mm 250 250
Total machine weight Kg 3150 3350
The very best multipurpose machine available due to the possibility to size nested panels and bore-router already sized panels (also for alternated work process).Optimised time and resources thanks to the Netline integration.
O7
Customisation and flexibility due to an extensive choice of equipment presets with Scm aluminium work table and Penta function.
pratix z2 Flexibility and effectiveness for any boring-routing requirement.
3-4 AXIS CNC MACHINING CENTRE WITH MULTIFUCTION ALUMINIUM TABLE
PRATIX Z2
Z2-27 Z2-31 Z2-52
Axes
Working area along X-Y-Z axes mm 2750 - 1300 - 160 3110 - 1300 - 160 5200 - 1300 - 160
Panel length along Y axis mm 1550 1550 1550
Panel length (for alternated work process) mm 1210 1390 2460
Vectorial speed X-Y axes (option) m/min 83 83 83
Boring head
Vertical spindles up to No. - rpm 18 (10X - 4+4Y) - 6000 18 (10X - 4+4Y) - 6000 18 (10X - 4+4Y) - 6000
Horizontal spindles up to No. - rpm 8 (4X - 4Y) - 6000 8 (4X - 4Y) - 6000 8 (4X - 4Y) - 6000
Integrated blade in X Ø mm - rpm 120 - 7500 120 - 7500 120 - 7500
Electrospindle
Std motor power (S6) kW (Hp) 12 (16,5) 12 (16,5) 12 (16,5)
Max. speed rpm 24000 24000 24000
Tool changer on the carriage in X (base) places 8 (10) 8 (10) 8 (10)
Installation
Exhaust air consumption/speed m³/hr - m/sec 3400/30 3400/30 3400/30
Exhaust outlet diameter mm 200 200 200
Total machine weight Kg 2400 2700 2900
O9
http://goo.gl/pJhtC
pratix n The passion for nesting. Ideal machine for nesting requirements.
Wide accessories availability that allow the creation of a complete cell, without necessity of a second operator for panel moving.
3-4 AXIS CNC MACHINING CENTRE WITH MULTIFUCTION ALUMINIUM TABLE
PRATIX N
N12 N15
Axes
Working area along X-Y-Z axes mm 2440 - 1220 - 150 3660 - 1550 - 150
Vectorial speed X-Y axes (option) m/min 83 83
Boring head
Vertical spindles up to (C and D versions) No. - rpm 12 (8X - 4Y) - 4000 12 (8X - 4Y) - 4000
Horizontal spindles up to (option) No. - rpm 6 (4X - 2Y) - 4000 6 (4X - 2Y) - 4000
Integrated blade in X (option) Ø mm - rpm 120 - 5000 120 - 5000
Electrospindle
Std motor power (S6) (C and D versions) kW (Hp) 12 (16,5) 12 (16,5)
Max. speed rpm 24000 24000
Tool changer on machine base places up to 20 up to 20
Installation
Exhaust air consumption/speed m³/hr - m/sec 3400/30 3400/30
Exhaust outlet diameter mm 200 200
Total machine weight Kg 3200 3500
11
http://goo.gl/UbXvA
pratix s The entry-level machine for nesting operations.
The perfect machine for those who want to begin machining by nesting.Much reduced overall dimensions makes this machining centre the most flexible and compact available on the market and therefore “perfect” for workshops with limited production space.
3 AXIS CNC MACHINING CENTRE WITH MULTIFUCTION ALUMINIUM TABLE
PRATIX S
S12 S15 S18 S22-31 S22-43
Axes
Working area along X-Y-Z axes mm 2486 - 1255 - 150 3686 - 1555 - 150 3686 - 1855 - 150 3086 - 2155 - 150 4286 - 2155 - 150
Vectorial speed X-Y axes m/min 35 35 35 35 35
Boring head
Vertical spindles up to (B version) No. - rpm 7 (5X -2Y) - 6000 7 (5X - 2Y) - 6000 7 (5X - 2Y) - 6000 7 (5X - 2Y) - 6000 7 (5X - 2Y) - 6000
Horizontal spindles (option) No. - rpm 4 (2X - 2Y) - 6000 4 (2X - 2Y) - 6000 4 (2X - 2Y) - 6000 4 (2X - 2Y) - 6000 4 (2X - 2Y) - 6000
Integrated blade in X (option) Ø mm - rpm 120 - 7500 120 - 7500 120 - 7500 120 - 7500 120 - 7500
Electrospindle
Std motor power (S6) kW (Hp) 6,6 (9) 6,6 (9) 6,6 (9) 6,6 (9) 6,6 (9)
Max. speed rpm 24000 24000 24000 24000 24000
Tool changer on machine base places 8 10 12 13 13
Installation
Exhaust air consumption/speed m³/hr - m/sec 3400 (5300*) /30 3400 (5300*) /30 3400 (5300*) /30 3400 (5300*) /30 3400 (5300*) /30
Exhaust outlet diameter mm 200 (250*) 200 (250*) 200 (250*) 200 (250*) 200 (250*)
Total machine weight Kg 1950 2200 2250 2550 2700
* = in presence of horizontal spindles
13
http://goo.gl/46shV
http://goo.gl/46shV
pratixExclusive features.
“NETLINE”: PROGRAMMING MACHINES AUTOMATICALLY. The automatic programming of beam saws, edge banders and machining centres, interconnected via a PC with advanced software, allows the creation of complete projects without any operator intervention and no risk of errors.pratix z5 , pratix z2 , pratix n
toptech “BUMPERS”: THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITYThe “bumpers” safety system is the only one that can fully exploit the potential of machining centres, without placing restrictions or constraints on the use of the machine:
toptech CANTILEVER STRUCTURE: UNIQUE AND EASY TO USE.The only structure that allows the loading of components along the “Y” axis far larger than the working capacity of the machine.pratix z5 , pratix z2
toptech “PRISMA 5” 5 AXIS ELECTROSPINDLE: OPERATING EASILY IN REDUCED SPACES WITHOUT RISK OF COLLISIONS.No limits to the possible uses of the 5-axis “Prisma 5” group which, with the patented Scm solution, allows the keeping of the overall dimensions in each direction of travel to a minimum. This results in maximum operator convenience and flexibility of use. pratix z5
BORING HEADS: NO MORE MACHINE DOWNTIME.The sturdiness of Scm boring heads is proven by the frequency of required maintenance, only every 1000 hours, five times better than that imposed by the majority of other machine manufacturers: indestructible and with low maintenance.
• maximum productivity• ease-of-use• more compact dimensions• guaranteed safetypratix z5 , pratix z2 , pratix s
toptech“HE” WORKTABLE: DESIGNED FOR EFFICIENCY AND SAVING. Careful studies and tests allow us to achieve a high level of work piece holding down without resorting to several high-power vacuum pumps. pratix n, pratix s
fluid dynamic analysis
15
40 m/min 70 m/minX
pratix Exclusive features.
“TECPAD”: EASE-OF-USE AND PRODUCTIVITY AT FINGER TIPS.The “Tecpad” standard remote control with LCD display, with 7” colour touch-screen allows the operator to fully manage the machine intuitively. The commands are always close to both the machine and the operator.pratix z5 , pratix s
HORIZONTAL ELECTROSPINDLE:HIGH WORKING SPEEDThe direct output of motion power without gears and sprockets, a guarantee of sturdiness, allows the processing of heavy duty work easily and fast, without having to worry about the possible breaking of the wood or the tooling.pratix z2
“PENTA” DEVICE: THE FLEXIBILITY OFFERED BY 5 AXES BUT AT A BUDGET PRICE.The “Penta” device can transform, with a modest investment, a standard 4-axis machine into a perfect 5-axis positioning one. Also available with automatic tool change.pratix z2
http://goo.gl/46shV
“PRO-SPACE” PROTECTIONS: SAFE AND COMPACT. Ideal for those with limited available space, it is distinguished by:• absence of perimeter protections• protections mounted directly on the mobile upright• also free access to the rear of the machinepratix s
“PRO-SPEED” PROTECTION: THE BEST COMPROMISE BETWEEN SPEED AND COMPACTNESS.X-axis speed up to 70 m/min due to the new Scm solution using the photo-bumpers system, ensuring reduced overall dimensions, maximum safety and ease-of-use.pratix z5, pratix z2, pratix n
17pratixWork table.
ALUMINIUM MULTIFUNCTION WORKTABLE WITH T-SHAPED GROOVES.Flexibility of use at the very best levels of production with the possibility to add to the standard vacuum work tables systems, support for panels or suctions cups. Also within the network of grooves, any type of support can be mechanically fixed to the table. pratix z5, pratix z2
“HE” WORKTABLE:DESIGNED FOR EFFICIENCY AND SAVING.Careful studies and tests allow us to achieve a high level of work piece holding down without resorting to several high-power vacuum pumps. The result:• secure hold down of the work piece = excellent machining speed• internal flows’ speed of up to 250Km/h = efficiency on the whole worktable • less consumption = energy saving (ecologically beneficial)pratix n, pratix s
Specific operating group for pratix z5: • boring head• “Prisma 5” 5 axis electrospindle, 11 kW - 15 HP with water cooling group
Specific operating group for pratix z2:• boring head• 12 kW - 16,5 HP vertical electrospindle • 5 kW - 7,6 HP horizontal electrospindle (C, D versions)• interpolating Vector axis (C version)
Specific operating group for pratix n:• boring head (B, C, D versions)• 12 kW – 16,5 HP electrospindle (C, D versions)• interpolating Vector axis (option)
Specific operating group for pratix s: • boring head (B version)• 6,6 kW - 9 HP electrospindle
19pratix Boring heads.
Boring unit with 7 vertical spindles and 4 horizontal spindles.No. 1 integrated blade along X direction (120 mm maximum diameter).pratix n, pratix s
Boring unit with 12 vertical spindles and 8 horizontal spindles.No. 1 integrated blade along X direction (120 mm maximum diameter).pratix z2
Boring unit with 12 vertical spindles and 6 horizontal spindles.No.1 integrated blade along X direction (120 mm maximum diameter).pratix z5 , pratix z2 , pratix n
Boring unit with 18 vertical spindles and 8 horizontal spindles. No.1 integrated blade along X direction (120 mm maximum diameter).pratix z2
Extensive customisation possiblewith quick attachments for boring heads and angular heads having 1, 2 and 4 outlets with HSK taper couplings for angled routing, boring and grooving with plays elimination system or fixed mechanical couplings.pratix z2 , pratix n , pratix s
21
A.C.
pratix Tool changers.
pratix Other devices.
TR8, TR10, TR12, TR13 tool changerPositioned on the machine base.No problems even with large dimensioned tools.
R8 tool changerFaster machine tool changeover due to the tool changer mounted on the machining head support.pratix z2, pratix n
R12 tool changerPositioned on the machining head support. It provides reduced setting-up times and higher tool-holder magazines capacity.pratix z5
“Pick up” tool changerwith pneumatic positioning on the machining head support.Ideal equipment when using large dimensioned angular driven heads.pratix s
TelesolveTeleservice system to connect the machine’s PC to the service department by means of the internet.
UpgradeTo 250 m³/hr 50 Hz pump (option).
Electrical cabinetwith air conditioner which maintains the temperature at around 18°C. (option).
Lasermanaged by optimisation software for correct positioning of each bar and suction cup (option).pratix z5 , pratix z2 , pratix n
Extensive choice of MPS and MODULSET suction cups• 90 x 90, 120 x 50, 130 x 130, H = 25 mm• 130 x 50, H = 50 mm• ø 120, H = 50 mm with an automatic lifting device
23
OIL
OIL
OIL
OIL
OIL
OIL
OIL
pratix Other devices.
VECTOR AXIS:NO LIMITS TO MACHINING.Simple and precise operations using the digitally controlled Vector Axis managed by the NC, allowing 360° rotation and automatic positioning on “X” and “Y” axes of all angular heads.pratix z2, pratix n
Centralised lubrication with manual pump.pratix s
Air blower with microlubricationAir blower with very little oil quantity for the tool lubrication and cooling when used on coated panels.pratix z2, pratix n
Air blower on electrospindlefor generic applications.
DEVICES FOR PARTICULAR APPLICATIONS
Ionized air blower on electrospindleIt is suitable to eliminate the electrostatic charges due to the cut material, making easier the shavings suction (advisable for plastic materials machining).pratix z2, pratix n
Bellows fro guides protection in x and y axesThis device is compulsory for plasterboard machining.pratix z5, pratix z2, pratix n
Automatic centralised lubrication managed using NC control.pratix z5, pratix z2, pratix n
25
http://goo.gl/pJhtC
pratix Loading/unloading automation The perfect solution to easily assist the operator‘s work
Nesting cell with lift table and unloading belt (also available with the loading version only or the unloading one).
Work piece outfeed pusherwith centralised optimised cleaning system for the table and side guides to avoid accidental work piece ejection.
Unloading beltwith photocell detection system.
Automatic lift tableWork piece loading group with 3 suction cups
27
http://goo.gl/pJhtC
pratix Loading/unloading automationuNesting cell uWork piece labelling
pratix Loading/unloading automationuAutomatic unloading with the otufeed on the right side
Manual labelingThe operator manually applies the label to the panels unloaded from the machine.
Automatic labelingAn automatic system with two controlled axes enables the application of labels before introduction of the panel the machine.
RAPID AND SIMPLE OPERATIONSFrom a rough panel to the finished piece of furniture through all the manufacturing phases.
PNEUMATIC UNLOADING DEVICE WITH THE OUTFEED ON THE RIGHT SIDEThe operator can position the workpiece just processed while the machine works the following panel thanks to the automatic feed of the workpiece outside the working area.
THE PANELS JUST MACHINED ARE MOVED BY PUSHER...
1
... AND POSITIONED ON AN UNLOADING WORK TABLE...
2
...A SECOND PUSHER RAISES FROM BENEATH THE TABLE AND...
3
...PUSHES THE PANEL TO THE OUTSIDE.4
29
http://goo.gl/fBp9q
SPAISoftware Solutions
maestro nesting maestro wdmaestro cabinet
netline: integrated processing advantages• Fast: very high execution speed and production time reduced to a minimum• Easy-to-use: does not require skilled operators• Costs reduction: a few minutes from design to production• Increased productivity: the software-machine integration sets to zero the programming time due to the automatic and immediate switching of information from design to production
OUR SOFTWARE PARTNERS
customer
assemblyinformation
cnc machines
cnc programming
edging information
edge bander
beam saw
cutting list
designoffice
production
rendering
layout planning
constructiondesign
calculation of lists
production drawings
assembly/delivery
scmnetlineGuaranteed competitiveness!
softwarexilogmaestroSimply-pro: pro-ject, pro-gramming and pro-duction becomes simple and straightforward!
xilo
g maestro: simply-pro
• easy-to-use• intuitive• immediate
maestro nesting maestro wdmaestro cabinet
xilog maestro from the scmgroup: the advantage of having simple and intuitive software• Easy-to-use: easy planning of 3D elements due to the software modules: maestro cabinet: to create complete cabinets and furniture maestro nesting: for rectangular and free-form elements it also ensures reduced production time and tool paths maestro wd: to create complete fastenings• Intuitive: intuitive programming due the pre-set large graphics macro library• Immediate: work table immediately set-up from 3D graphics
SOFTWARE
salespointnet
line:
g
uaranteed competitiveness
• fast• easy-to-use• costs reduction• increased production
3D graphic set-up of work table
programming work table from 3D graphics
graphics library
31pratix Machines set up for all requirements.
q pratix z5q ideal set up for: q pratix z2 q pratix n q pratix s
“D” DOORS APPLICATIONS / COMPLETE AUTOMATION
uRemote control for machine controlsu Optimised centralised exhaust outlet u F12 boring head with inverteru 12 kW electrospindle with R8 tool changeru Set up for angular heads with preloading u 2 outlets electrospindle for horizontal power routingu Automatic centralised lubricationu Multifunction aluminium worktable u 3 stops for “A” field, 3 stops for “D” field u 90/108 m³/hr 50/60 Hz vacuum pumpu Xilog Maestro and Telesolve software
MINIMUM SET-UP u7,5 kW electrospindleu Vacuum area for half or entire working areau 90/108 m³/hr 50/60 Hz vacuum pump (pratix n12)u 250/300 m³/hr 50/60 Hz vacuum pump (pratix n15)u Xilog Maestro and Telesolve software
“B” GENERIC APPLICATIONS
uRemote control for machine controlsu Optimised centralised exhaust outlet u F12 boring head with inverteru 12 kW electrospindle and R8 tool changeru Set up for angular heads with preloadingu Automatic centralised lubricationu Multifunction aluminium worktable u 3 stops for “A” field, 3 stops for “D” field u 90/108 m³/hr 50/60 Hz vacuum pumpu Xilog Maestro and Telesolve software
uRemote control for machine controlsu Optimised centralised exhaust outletu F12 boring head with 12 kW electrospindleu Set up for angular heads with preloading and TR10 tool changeru Automatic centralised lubricationu Multifunction aluminium worktableu 3 stops for “A” field, 3 stops for “D” field u 90/108 m³/hr 50/60 Hz vacuum pumpu Xilog Maestro and Telesolve software
u7,5 kW electrospindle with TR10 tool changeru Vacuum area for half or entire working areau Automatic centralised lubricationu 250/300 m³/hr 50/60 Hz vacuum pumpu Preset for second 250/300 m³/hr vacuum pumpu Xilog Maestro and Telesolve software
u6,6 kW electrospindle with Tecpad control u Preset for heads with fixed mechanical coupling systemu Tool changers: TR8 for S12 • TR10 for S15 • TR12 for S18 • TR13 for S22-31u HE multifunction aluminium tableu 4 right rear stops for D fieldu Machining on a single areau Centralised lubrication with manual pump u Presetting for up to 2 vacuum pumpsu Nesting rectangular module for Xilog Maestrou Xilog Maestro and Telesolve software
u6,6 kW electrospindle with Tecpad controlu F7 boring head with inverteru Centralised exhaust outletu Preset for heads with fixed mechanical coupling systemu Tool changer: TR8 for S12 • TR10 for S15 • TR12 for S18 • TR13 for S22-31u HE multifunction aluminium worktableu 4 right rear stops for D fieldu Machining on a single areau Centralised lubrication with manual pump u Presetting for up to 2 vacuum pumpsu Nesting rectangular module for Xilog Maestrou Xilog Maestro and Telesolve software
uRemote control for machine controlsu 7,5 kW electrospindle with TR10 tool changeru F7 boring headu no. 2 electronic detecting systemsu Vacuum area for half or entire working lengthu Optimised centralised exhaust outletu Automatic centralised lubrication u 250/300 m³/hr 50/60 Hz vacuum pump u Preset for second 250/300 m³/hr vacuum pump u Xilog Maestro and Telesolve software
“C” FULL OPTIONAL VERSION
uRemote control for machine controlsu Optimised centralised exhaust outlet u F12 boring head with inverter u Device to increase the drilling pressureu “Prisma 5” 5 axis head with water cooling groupu TR10 and R12 tool changersu Automatic centralised lubricationu Multifunction aluminium worktableu 90/108 m³/hr 50/60 Hz vacuum pumpu Xilog Maestro and Telesolve software
uRemote control for machine controlsu Optimised centralised exhaust outlet u F12 boring head with inverter u 12 kW electrospindle with R8 and TR10 tool changersu VECTOR AXIS with Penta Digital Controlu 2 outlets electrospindle for horizontal power routing u Automatic centralised lubricationu Multifunction aluminium worktable u 3 stops for “A” field, 3 stops for “D” field u 90/108 m³/hr 50/60 Hz vacuum pumpu Xilog Maestro and Telesolve software
uRemote control for machine controlsu 12 kW electrospindle with TR10 tool changeru F12 boring headu no. 2 electronic detecting systems u Vacuum area for half or entire working areau Optimised centralised exhaust outletu Automatic centralised lubricationu 250/300 m³/hr 50/60 Hz vacuum pumpu Preset for second 250/300 m³/hr vacuum pump u Xilog Maestro and Telesolve software
uRemote control for machine controlsu 12 kW electrospindle with TR10 tool changeru F12 boring headu no. 2 electronic detecting systems u Vacuum area for half or entire working areau Optimised centralised exhaust outletu Automatic centralised lubricationu 250/300 m³/hr 50/60 Hz vacuum pumpu Preset for second 250/300 m³/hr vacuum pumpu Automatic loading unit and workpiece outfeed beltu Xilog Maestro and Telesolve software
“A” PANEL MACHINING
Minimum set up
fulloptional
33
pratix z5 u
pratix z2 u
pratix s u
2625
6362 (pratix z2-27)6822 (pratix z2-31)9040 (pratix z2-52)
2354
1667
3151
6822 (pratix z5-31)9042 (pratix z5-52)
3004
1667
4465 (pratix s12)5900 (pratix s15)5065 (pratix s22)
920
2190
2486 (pratix s12)2790 (pratix s15)3373 (pratix s22)
2486 (pratix s12) - 3686 (pratix s15) - 3086 (pratix s22)
1255
(pr
atix
s12
) 15
50 (
prat
ix s
15)
2155
(pr
atix
s22
)
1685
(pra
tix s
12)
1985
(pra
tix s
15)
2585
(pra
tix s
22)
330
O
3120 (pratix s12) - 4320 (pratix s15) - 3770 (pratix s22)
250
-55
125
250
375
max
=180
3060 (pratix z2-27) - 3509 (pratix z2-31) - 5714 (pratix z2-52)
2750 (pratix z2-27) - 3110 (pratix z2-31) - 5200 (pratix z2-52)
125010
15 1735
70
1620
1550 14
50
1131
1250
381
170
485
157,5
3050 (pratix z5-31)5200 (pratix z5-52)
3527 (pratix z5-31)
322,5154,5
95,5
319,5
5709 (pratix z5-52)
440
313
397
127
0
170
-80
pratix Overall dimensions and axes stroke.
Work table
Z axis stroke 250
11621 pratix n 1215180 pratix n15
4701 pratix n 124911 pratix n15
5958 pratix n 127201 pratix n15
4209 pratix n 124407 pratix n15
260
0
pratix n q
passiontechnologyperformance
www.scmgroup.com/qrcode/v1/
www.scmgroup.com/it/mission_scm
7527
5 350
A
D
N
P
C
FG
HL
M
E
B
pratix Overall dimensions and axes stroke.
WORKING AREA A B C D E F G H L M N P
pratix n12 mm 3035 1745 263,5 2771,5 304,5 262,5 458,5 66,5 262,5 1220 290,5 331,5
pratix n15 mm 4271 1996 272 3999 313 259 423 53 217 1520 298 339
Z axis stroke 240
1 large integrated group 18 production sites29 specialist brands21 foreign branches more than 5O years in business7O% exports35O agents and distributors365 registered patents5OO engineers3.OOO square metres showroom1O.OOO classical and professionalmachines manufactured per year24O.OOO square metresof production space
The technical data can vary according to the requested machine composition. In this catalogue, machines are shown with options. The company reserves the right to modify technical specifications without prior notice; the modifications do not influence the safety foreseen by the CE Norms.