Plate Door FurnitureD
oor Furniture and General Hardw
are
3.79Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
Plate Door Furniture
Plate Door Furniture
3.80 Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
For a smart look choose this rectangular plate with bevelled edges and corners. It features concealed fixing on the outside plate.
ApplicationDesigned for use with the Lockwood Synergy & Pentagon Series Mortice Locks and Latches.
Features and SpecificationsHandingPlates are not handed; lever may be reversed by removing stop screw, except those denoted by *.
Dimensions166 x 48 x 12mm
FixingPlates are designed to fit back to back. If outside plate is specified with concealed fixing, then the inside plate must be visible fixed.
Door ThicknessExternal plates are supplied with fixing screws to suit door thickness between 32 and 50mm.
Turn FunctionsTurn functions feature a unique mechanism that automatically adjusts the length of the tail bar to suit a particular door thickness. Turn functions may be used directly with a Pentagon Series Mortice Lock without the need for a turn adaptor to be installed in the lock (excludes anti vandal applications).
FinishesStandard Satin Chrome Brushed SC
Non StandardChrome Plate CP Polished Brass PB Polyester Powdercoat PC Other finishes on application.
48
4812
166
00
70 80 83
42*
59
49
60
20 32
9087
4443
97
45 48*41* 51*50*
53*
52*
54*
40
56* 57 61* 69
For compatility chart
00
7059 62
20 32 44 45 48*41*
53* 55
40
61*
Other brass only
00
70 80 83
42*
59
49
60
32
9087 97
45 48*41* 51* 53*52* 54* 56*
57 61*
Short backset brass
00
7062
80
5532 44 45 48*41* 53*
61*
97
59
Symphony only
71
71
71
74 78
79B 90 91 94*
80 97
74
78
79
79 79B 90 91 94*
Levers and Knobs to Suit For detailed information regarding brass levers refer to page 3.100
* Denotes handed levers
Plates and Functions
2821 2822
2906 2908 2909 2920 2921 2922
2800 2801 2802 2803 2804 2805 2806 2807
2907
2808 2810
2814 2816 2820
2809 2813
2815
2905
2823
580558025800 5807 5820 5822 5823 58035801
59055900 59075904 5920 59225901 5906 59185917
1821 1822
1906 1908 1909 1920 1921 1922
1800 1801 1802 1803 1804 1805 1806 1807
1907
1808 1810
1816 1820
1809
1815
18141813
480548024800 4807 4820 4822 4823 48034801
49054900 49074904 4920 49224901 4906 49184917
1901 19041900 1905
1823
460546024600 4607 4620 4622 4623 46034601
47054700 47074704 4720 47224701 4706 47184717
2901 29042900
19391938
2939
1878
2878
Plate Numbers marked red indicate no lever option
Cylinder Hole
Turnknob
Slotted Turn
Fixed Lever
Disabled
LED
Indicating Turnknob
Indicating Slotted Turn
Lever
Plates and Functions Legend
00
70 80 83
42*
59
49
60
20 32
9087
4443
97
45 48*41* 51*50*
50*
50*
53*
52*
54*
40
56* 57 61* 69
For compatility chart
7059 62
20 32 44 4541* 53*
55
40Other brass only
00
70 80 83
42*
59
49
60
32
9087 97
45 48*41* 51* 53*52* 54* 56*
57 61*
Short backset brass
00
7062
80
55A32 44 45 48*41* 53*
61*
97
59
Symphony only
71
71
71
74 78 79B
90 91 94*
80 97
74 78
79
79 79B 90 91 94*
83
83
55A
1800 Series Square End Plate Furniture
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
Plate Door Furniture
Door Furniture and General H
ardware
3.81Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
A beautifully curved brass plate with bevelled edges and the benefit of concealed fixing on the external plate.
ApplicationDesigned for use with Lockwood Synergy & Pentagon Series Mortice Locks and Latches.
Features and SpecificationsHandingPlates are not handed, lever may be reversed by removing stop screw, except those denoted by*.
Dimensions166 x 48 x 12mm
FixingPlates are designed to fit back to back. If outside plate is specified with concealed fixing, then the inside plate must be visible fixed.
Door ThicknessExternal plates are supplied with fixing screws to suit door thickness between 32 and 50mm.
Turn FunctionsTurn functions feature a unique mechanism that automatically adjusts the length of the tail bar to suit a particular door thickness. Turn functions may be used directly with a Pentagon Series Mortice Lock without the need for a turn adaptor to be installed in the lock (excludes anti vandal applications).
FinishesStandard Satin Chrome Brushed SC
Non StandardChrome Plate CP Polished Brass PB Polyester Powdercoat PC Other finishes on application.
Plates and Functions
Levers and Knobs to Suit For detailed information regarding brass levers refer to page 3.100
2821 2822
2906 2908 2909 2920 2921 2922
2800 2801 2802 2803 2804 2805 2806 2807
2907
2808 2810
2814 2816 2820
2809 2813
2815
2905
2823
580558025800 5807 5820 5822 5823 58035801
59055900 59075904 5920 59225901 5906 59185917
1821 1822
1906 1908 1909 1920 1921 1922
1800 1801 1802 1803 1804 1805 1806 1807
1907
1808 1810
1816 1820
1809
1815
18141813
480548024800 4807 4820 4822 4823 48034801
49054900 49074904 4920 49224901 4906 49184917
1901 19041900 1905
1823
460546024600 4607 4620 4622 4623 46034601
47054700 47074704 4720 47224701 4706 47184717
2901 29042900
19391938
2939
1878
2878
Plate numbers marked red indicate no lever option
* Denotes handed levers
Cylinder Hole
Turnknob
Slotted Turn
Fixed Lever
Disabled
LED
Indicating Turnknob
Indicating Slotted Turn
Lever
Plates and Functions Legend
166
484812
00
70 80 83
42*
59
49
60
20 32
9087
4443
97
45 48*41* 51*50*
50*
50*
53*
52*
54*
40
56* 57 61* 69
For compatility chart
7059 62
20 32 44 4541* 53*
55
40Other brass only
00
70 80 83
42*
59
49
60
32
9087 97
45 48*41* 51* 53*52* 54* 56*
57 61*
Short backset brass
00
7062
80
55A32 44 45 48*41* 53*
61*
97
59
Symphony only
71
71
71
74 78 79B
90 91 94*
80 97
74 78
79
79 79B 90 91 94*
83
83
55A
2800 Series Round End Plate Furniture
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
Plate Door Furniture
Door Furniture and General H
ardware
3.83Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
Easy to install and operate, Lockwood Proximity Furniture is available in a wide range of stylish levers and finishes to enhance any contemporary building design, bringing a new dimension to commercial security locking solutions.
Proximity Mortice Lock Specifications Multivoltage 12 24VDC
Field selectable fail safe/fail secure
60mm backset only
MonitoringThe following monitoring features are standard:
Dual key override
Deadlatched and locked
Door closed
Request to exit
Proximity Reader Specifications HID 125KHz proximity reader
Wiegand data output
Supply voltage: 5 12VDC
Current requirements (stand by/peak) 25/90mA @ 5VDC, 15/125mA @ 12VDC
Beeper activated when presenting proximity card
Red/green led indication of reader/lock status
Proximity Furniture
For details refer to 5.44
Plate Door Furniture
3.84 Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
4800 Series Narrow Stile Plate Furniture
185
26 11.5
A slimline, rectangular brass plate that adds style to your choice of lever.
ApplicationDesigned for use with Lockwood 3570 Synergy Series and 3P70 Pentagon Series Mortice Latches (4600/4700) and 3580 Series Synergy and 3P80 Pentagon Mortice Latches (4800/4900)Note: certain lever designs are not compatible on short backset assemblies due to interference with the door stop. Refer to page 3.80 for lever/backset suitability on 4800/4900 Series Plates.
Features and SpecificationsDimensions185 x 26 x 11.5mm
FixingPlates are designed to fit back to back. If outside plate is specified with concealed fixing, then the inside plate must be visible fixed. All lever handles are reversible, except those denoted by*.
Door ThicknessExternal plates are supplied with fixing screws to suit door thickness between 32 and 50mm. Refer to lockweb.com.au for information on fixing screw and spindle options for thicker doors.
FIRE RATED
4800/4900 Plates and Functions (3580 Series)
4600/4700 Plates and Functions (3570 Series)
Levers to Suit For detailed information regarding brass levers refer to page 3.100
480548024800 4807 4820 4822 4823 48034801
49054900 49074904 4920 49224901 4906
4808 4809
4908 4909 4938 4939
480546024600 4807 4620 4622 4623 46034601
49054700 49074704 4720 47224701 4706
4608 4809
49094708 4938 4939
Plate numbers marked red indicate no lever option* Denotes handed levers
Cylinder Hole
Turnknob
Slotted Turn
Fixed Lever
Disabled Accessible
LED
Indicating Turnknob
Indicating Slotted Turn
Lever
Plates and Functions Legend
00
70 80 83
42*
59
49
60
20 32
9087
4443
97
45 48*41* 51*50*
50*
50*
53*
52*
54*
40
56* 57 61* 69
For compatility chart
7059 62
20 32 44 45 48*41*
53* 55
40Other brass only
00
70 80 83
42*
59
49
60
32
9087 97
45 48*41* 51* 53*52* 54* 56*
57 61*
Short backset brass
00
7062
80
55 55A32 44 4541* 53*
61*
97
59
Symphony only
71
71
71
74 78 79B
90 91 94*
80 97
74 78
79
79 79B 90 91 94*
83
83
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION* 3570 Series only
Plate Door Furniture
Door Furniture and General H
ardware
3.85Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
5800 Series Narrow Stile Plate Furniture
185
11.526
Functional, yet elegant, the soft lines of this round ended brass plate complement a wide range of levers.
ApplicationDesigned for use with Lockwood 3570 Synergy Series and 3P70 Pentagon Series Mortice Latches (4600/4700) and 3580 Series Synergy and 3P80 Pentagon Mortice Latches (4800/4900)Note: certain lever designs are not compatible on short backset assemblies due to interference with the door stop. Refer to page 3.80 for lever/backset suitability on 4800/4900 Series Plates.
Features and SpecificationsDimensions185 x 26 x 11.5mm
FixingPlates are designed to fit back to back. If outside plate is specified with concealed fixing, then the inside plate must be visible fixed. All lever handles are reversible, except those denoted by *.
Door ThicknessExternal plates are supplied with fixing screws to suit door thickness between 32 and 50mm. Refer to lockweb.com.au for information on fixing screw and spindle options for thicker doors.
FIRE RATED
5800/5900 Plates and Functions (3580 Series)
Levers to Suit For detailed information regarding brass levers refer to page 3.100
580558025800 5807 5820 5822 5823 58035801
59055900 59075904 5920 59225901 5906 59395938
5808 5809
59095908
580556025600 5807 5620 5622 5623 56035601 5608 5809
59055700 59075704 5720 57225701 5706 5739573859095708
5600/5700 Plates and Functions (3570 Series)
Plate numbers marked red indicate no lever option* Denotes handed levers
Cylinder Hole
Turnknob
Slotted Turn
Fixed Lever
Disabled Accessible
LED
Indicating Turnknob
Indicating Slotted Turn
Lever
Plates and Functions Legend
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION* 3570 Series only
00
70 80 83
42*
59
49
60
20 32
9087
4443
97
45 48*41* 51*50*
50*
50*
53*
52*
54*
40
56* 57 61* 69
For compatility chart
7059 62
20 32 44 45 48*41*
53* 55
40Other brass only
00
70 80 83
42*
59
49
60
32
9087 97
45 48*41* 51* 53*52* 54* 56*
57 61*
Short backset brass
00
7062
80
55 55A32 44 4541* 53*
61*
97
59
Symphony only
71
71
71
74 78 79B
90 91 94*
80 97
74 78
79
79 79B 90 91 94*
83
83
Plate Door Furniture
3.86 Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
Lockwood 4800/5800 Series Plate Furniture
Backset Suitability Chart Based on 12mm doorstop
Lever Number
Handed
3580 23mm
4580 25.4mm
5580 30mm
6580 38mm
32 No No No Yes Yes
41 Yes No No Yes Yes
44 No No No No No
45 No No No Yes Yes
50 Yes No No No No
53 Yes No No Yes Yes
55 No No No No No
55A No No No Yes Yes
59 No No No Yes Yes
62 No No No Yes Yes
70 No Yes Yes Yes Yes
71 No No No Yes Yes
74 No No No Yes Yes
78 No No No Yes Yes
79 No No No No No
79B No No No Yes Yes
80 No No Yes Yes Yes
83 No No No Yes Yes
90 No No No Yes Yes
91 No No No Yes Yes
94 Yes Yes Yes Yes Yes
97 No Yes Yes Yes Yes
Plate Door Furniture
3.88 Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
The 200 Series Door Furniture is 162mm square with square corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door.
ApplicationDesigned for use with Lockwood 3570!Series Mortice Locks; Latches and Push and Pull doors.
Features and SpecificationsDimensions162 x 162 x 3mm ñ aluminium 162 x 162 x 2mm ñ stainless steel and brass
MaterialsAluminium, brass and stainless steel
Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000 208.Note: When using flush pulls back to back the minimum door thickness is 40mm.
FinishesStandardNatural Anodised Aluminium NT Satin Stainless Steel SS
Non Standard Polished Stainless Steel PS Powdercoat PC Marine Grade MG Polished Brass PB
162 2 3
162
48.7
28.6 SS/Brass Aluminium
Plates
Levers and Knob to Suit
Pull Handle to Suit
Cylinder Hole
Turn Snib
Slotted Button
Disabled
LED
Indicating Slotted Button
Legend
20001NA
20022NN
20101NA 20120NANN41002NN30002 20004NN
NN70102NE70002 20007NN20007FN
20104NN
20139NN20005NN
20025NA/75* 20125NA/75* 20027NN/75* 20127NN/75* 20028NN/75* 20142NN/75*20024NN/75* 20124NN/75*
20122NN20105NN
20020NA
20000NA 20100NA 20006NN 20106NN 20013NN 20138NNAN01002NN20002
20024AN/75* 20024CN/75* 20024EN/75* 20024GN/75* 20031NN 20131NN 20032NA 20132NA 20035NN
20007AN 20007CN
20134NN
*5857 1611 12Stainless SteelAluminium
20 89698*8 *Aluminium Only
Brass levers and knobs also available on stainless steel and brass plates refer page 3.100
200 Series Artefact Square Corner Plates
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
Plate Door Furniture
Door Furniture and General H
ardware
3.89Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
The 202 Series Door Furniture is 162mm square with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door.
ApplicationDesigned for use with Lockwood 3570!Series Mortice Locks; Latches and Push and Pull doors.!
Features and SpecificationsDimensions162 x 162 x 3mm ñ aluminium 162 x 162 x 2mm ñ stainless steel and brass
MaterialsAluminium, stainless steel and brass.
Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000 208.Note: When using flush pulls back to back the minimum door thickness is 40mm.
FinishesStandardNatural Anodised Aluminium NT Stainless Steel SS
Non Standard Polished Stainless Steel PS Powdercoat PC Marine Grade MG Polished Brass PB
162 2 3
162
48.7
28.6 SS/Brass Aluminium
Plates
Cylinder Hole
Turn Snib
Slotted Button
Disabled
LED
Indicating Slotted Button
Legend
20201NA 20220NA20301NA 20320NANN41202NN30202 20204NN
20207NN 20307NN20207FN20207AN 20207CN 20207EN
20304NN
20339NN20205NN
20225NA/16* 20325NA/16* 20227NN/16* 20327NN/16* 20228NN/16* 20342NN/16*20224NN/16* 20324NN/16*
20322NN20305NN 20222NN
20210NA NN83302NN31202NN60302AN00302AN00202 20202NN 20206NN
AN23302NN13202*/NG42202*/NE42202*/NC42202*/NA42202 20232NA NN43202NN53202NN1330216 16 16 16
Levers and Knob to Suit
Pull Handle to Suit
*5857 1611 12Stainless SteelAluminium
20 89698*8
202 Series Artefact 10mm Radius Corner Plates
*Aluminium Only
Brass levers and knobs also available on stainless steel and brass plates refer page 3.100
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
Plate Door Furniture
3.90 Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
The 212 Series Door Furniture is 162mm long x 50mm wide with radius ends. Concealed fixed plates have studs with internal threads located top and bottom, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door.
ApplicationDesigned for use with Lockwood 3570!Series Mortice Latches.
Features and SpecificationsDimensions162 x 50 x 3mm ñ aluminium 162 x 50 x 2mm ñ stainless steel and brass
MaterialsAluminium, stainless steel or brass.
Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000 208.
FinishesStandardNatural Anodised Aluminium NT Stainless Steel SS
Non Standard Polished Stainless Steel PS Powdercoat PC Marine Grade MG Polished Brass PB
50
162
2 3
SS/Brass Aluminium
Plates
Cylinder Hole
Turn Snib
Slotted Button
Disabled
LED
Indicating Slotted Button
Legend
21200NA 21300NA 21206NN 21306NN 21207NN 21307NN 21213NN 21338NN21210NA21202NN
NN40312NN40212NN30212AN10312AN10212 21205NN 21305NN
21220NA 21320NA 21222NN 21322NN
21214NN 21339NN
Levers and Knob to Suit
Pull Handle to Suit
*5857 1611 12Stainless SteelAluminium
20 89698*8
212 Series Artefact Oval Plates
*Aluminium Only
Brass levers and knobs also available on stainless steel and brass plates refer page 3.100
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
Plate Door Furniture
Door Furniture and General H
ardware
3.91Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
The 224 Series Door Furniture is 162mm long x 50mm wide with square ends. Concealed fixed plates have studs with internal threads located top and bottom, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door.
ApplicationDesigned for use with Lockwood 3570!Series Mortice Latches.
Features and SpecificationsDimensions162 x 50 x 2mm ñ stainless steel
MaterialsStainless Steel only.
Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000 208.
Standard FinishesStainless Steel SS
50
162
2 3
Stainless SteelPlates
Levers and Knob to Suit
Cylinder Hole
Turn Snib
Slotted Button
Disabled
LED
Indicating Slotted Button
Legend
22400NA 22500NA 22406NN 22506NN 22407NN 22507NN 22413NN 22538NN22410NA22402NN
NN402NN402NN302AN1025 252AN1024 24 242 22405NN 22505NN
22420NA 22520NA 22422NN 22522NN
22414NN 22539NN
20 8969
Brass levers and knobs also available refer page 3.100
Pull Handle to Suit
1611 12Stainless Steel
224 Series Artefact Rectangular Plates
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
Plate Door Furniture
Door Furniture and General H
ardware
3.93Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
DescriptionA heavy duty plate designed for use in hospitals and detention facilities. Styled for institutional use, this plate has six fixing points to ensure that it is well secured to the door. Plates are designed to be free of ligature points.
ApplicationLockwood 3570 Series Mortice Locks and Lockwood 3579 Secure Area Rated Locks.
Features and SpecificationsAnti ligatureCovers fixing holes from existing Artefact 200 Series FurnitureDetention furniture turns feature a clutching mechanism that allows the cylinder to retract the bolt even if the turn knob is held from the inside.
Dimensions162mm x 180mm x 2mm: base plate161mm x 75mm x 3mm: bevelled top plate
HandingAll plates are handed except 220D07 and 220D31, which are non handed when ordered without engraving.MaterialsStainless steel
FixingSix fixing points220D series plates have concealed fixings221D series plates have visible fixings
Door Thickness35mm minimum, 45mm maximumFor thicker doors, longer screws are required.Note: A minimum door thickness of 50mm is required to fit flush pulls back to back.
Standard FinishSatin Stainless Steel SS
Lever and Knob Selection
325
È 60 ˘ 60
33
120
35
61
Webbed Knob 22 Lever 23Standard Knob 21
325
È 60 ˘ 60
33
120
35
61
Detention Series Furniture ñ Square Plate
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
Plate Door Furniture
3.94 Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
220D00 220D01 220D02 220D03 220D04 220D05 220D06
220D07 220D08 220D09 220D13 220D14 220D15 220D16
220D20 220D21 220D22 220D23 220D24 220D25 220D26
220D27 220D28 220D29 220D31 220D32 220D33 220D34
220D35 220D36 220D56 220D57 220D58 220D59 220D60
220D61 220D62 220D63 220D64 220D65 220D66 220D67
Legend: Cylinder Hole Knob/Lever Turn Snib Emergency TurnFixed Knob/Lever
Privacy IndicatorTurn Snib
Privacy IndicatorEmergency Turn
LED Pull Handle Flush Pull
Cylinder guards must be ordered separately. Only the plate functions shown above in red are available with engraving.
Detention Series Furniture ñ Square Plate Functions
Plate Door Furniture
Door Furniture and General H
ardware
3.95Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
DescriptionThis smaller plate range has been designed for use in detention facilities such as hospitals where domestic aesthetics are preferred over institutional type styling. Plates are designed to be free of ligature points.
ApplicationLockwood 3570 Series Mortice Locks and Lockwood 3579 Secure Area Rated Locks.
Features and SpecificationsAnti ligatureCovers fixing holes from existing 212 Series Artefact PlatesDetention furniture turns feature a clutching mechanism that allows the cylinder to retract the bolt even if the turn knob is held from the inside.
Dimensions162mm x 76mm x 2mm: base plate161mm x 75mm x 3mm: bevelled top plate
HandingOnly plates with levers and/or turn knobs are handed.
MaterialsStainless steel
FixingFour fixing points222D series plates have concealed fixings223D series plates have visible fixings
Door Thickness35mm minimum, 45mm maximumFor thicker doors, longer screws are required.
Standard FinishesSatin Stainless Steel SS
Lever and Knob Selection
325
È 60 ˘ 60
33
120
3561
Webbed Knob 22 Lever 23Standard Knob 21
Detention Series Furniture ñ Rectangular Plate
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
Plate Door Furniture
3.96 Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
222D00
Legend: Cylinder Hole Knob/Lever Turn Snib Emergency TurnFixed Knob/Lever
Privacy IndicatorTurn Snib
Privacy IndicatorEmergency Turn
LED Pull Handle Flush Pull
222D01 222D02 222D03 222D04 222D05 222D06 222D07 222D08 222D09 222D13
222D15222D14 222D16 222D20 222D21 222D22 222D23 222D24
Note: Only plates with levers and/or turn knobs are handed. 223D Series have visible fixings.
Detention Series Furniture ñ Rectangular Plate Functions
Plate Door Furniture
Door Furniture and General H
ardware
3.97Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
325
È 60
˘ 60
33
120
3561
Knobs and LeverStandard Knob 21Simple yet functional, this knob has soft edges to minimise impact injuries and anti ligature features that make it suitable for use in detention facilities.
Webbed Knob 22
The webbed knob combines pleasing aesthetics, comfortable grip and anti ligature features to provide a solution for any environment.
Detention Lever 23
Ergonomically designed to maximise grip, the detention lever is suitable for use in hospitals and minimum security applications. It caters especially for the elderly or people with arthritic conditions.
TurnsEmergency Turn
Indicating Emergency Turn3
42
42
42
3
42
325
È 60
˘ 60
33
120
3561
Turn Knob
Indicating Turn Knob
Detention Series Furniture ñ Accessories
Plate Door Furniture
3.98 Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
30R10
40
161
121
35
PullsFlush PullThe detention flush pull has been designed to maximise grip and eliminate the possibility of hiding objects in the cavity.
Standard Pull
The detention pull allows for a firm grip and can be used to open heavy doors. Also designed to be free of hanging points.
Cylinder GuardsDescriptionCylinder guards must be fitted with any cylinder plate function. Guards are available to suit different door thicknesses.
Fixing ScrewsTorx anti tamper, snake eye and standard screws are available in accessory packs to suit different door thicknesses. Only standard screws to suit doors 35mm ñ 45mm thick are supplied with furniture. Other variations need to be ordered separately using part numbers specified.
Part Number Door Thickness Suitability220D00/40SS Suit doors 35 40mm
220D00/45SS Suit doors 40 45mm
220D00/50SS Suit doors 45 50mm
220D00/55SS Suit doors 50 55mm
220D00/60SS Suit doors 55 60mm
Part Number Description Door Thickness Suitability 220D11/45 Torx Anti tamper Screws 35 45mm
220D11/55 Torx Anti tamper Screws 45 55mm
220D11/65 Torx Anti tamper Screws 55 65mm
220D12/45 Standard Screws 35 45mm
220D12/55 Standard Screws 45 55mm
220D12/65 Standard Screws 55 65mm
220D13/50 Snake eye Screws 35 50mmAll accessory packs contain six screws.
Detention Series Furniture ñ Accessories
Plate Door Furniture
3.100 Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
The exceptional range of Palladium Door Furniture offers builders, specifiers and interior designers an array of levers that can be used in any residential environment.
The Palladium Series of door furniture reflects the best in quality, blended with sophisticated designs. The Palladium Series was produced to meet the rigorous aesthetic requirements of residential markets, while conforming to the ever increasing need for quality semi commercial building segments.
Available in Palladium and Palladium Xtra versions to suit a wide range of applications.
SummitÆ L1
SaltbushÆ #34
SpireÆ L2
MulgaÆ #36
AriaÆ #27
GidgeeÆ #37
Elementô L3 Glideô L4
HakeaÆ #28 AcaciaÆ #29
PalladiumÆ Series Overview
Plate Door Furniture
Door Furniture and General H
ardware
3.101Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
The Palladium Series represents the highest standard in residential and semi commercial door hardware and is brought to you through modern innovative designs, combined with quality manufacturing. A wide range of lever options is available to enable a common style throughout the home.
Features and SpecificationsDimensions222 x 30 x 9mm
HandingEasy, field selectable handing.
MaterialsAll plates and levers in the Palladium Series are constructed from solid zinc die cast.
FixingLockwood Palladium Series Door Furniture is a complete set, supplied with both the internal and external plates. Plates are designed to fit back to back to be fully concealed externally.
Door ThicknessMinimum 32mm ñ maximum 45mm door thickness.
KeyingUse with Euro profile cylinder.
FinishesSatin Chrome Pearl SP Chrome Plate CP Gold Plate GLD Black BLK Polyester Powdercoat PPC (Specify Dulux Color)
PalladiumÆ Series Door Furniture
2/85
85
3/85
4/00 1/00
4/85
## Represents lever style number.
Note: The internal single cylinder configuration is also used in the Palladium French Door kits (PLFD/85/##) only in this configuration the external lever is fixed.
85mm Plates and FunctionsFor use with Optimum Mortice Locks.
No Pitch PlatesFor use with passage functions.
PL2/85/##
PL1/00/##
PL3/85/##
PL5/00/##
PL4/85/##
2/85
30
222
Plate Door Furniture
3.102 Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
The Palladium Xtra Series is designed specifically for the Optimum range of mortice locks to increase functionality enabling both internal snibbing for safety mode and lock status indication.
Palladium Xtra is suitable for use in residential buildings, apartments and semi commercial applications.
Features and SpecificationsDimensions222 x 30 x 9mm
HandingEasy, field selectable handing.
MaterialsAll plates and levers in the Palladium Series are constructed from solid zinc die cast.
FixingLockwood Palladium Xtra door furniture is a complete set, supplied with both the internal and external plates. Plates are designed to fit back to back to be fully concealed externally.
Door ThicknessMinimum 32mm ñ maximum 45mm door thickness.
KeyingUse with Euro profile cylinder.
FinishesSatin Chrome Pearl SP Black BLK Chrome Plate CP Polyester Powder Coat PPC
2/85
30
222
4/85## Represents lever style number.
85mm Plates and Functions
PX4/85/##
PalladiumÆ Xtra Furniture
Plate Door Furniture
Door Furniture and General H
ardware
3.103Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au
SummitÆ L1
SpireÆ L2
AriaÆ #27
HakeaÆ #28
AcaciaÆ #29
SaltbushÆ #34
MulgaÆ #36
GidgeeÆ #37
Elementô L3
Glideô L4
32 4561 61
222
113
30
32 4561 61
222
115
30
32 4558 58
222
110
30
32 4560 60
222
109
30
32 4552 52
222
112
30
32 4566 66
222
110
30
32 4560 60
222
111
30
32 4568 68
222
109
30
32 4567 67
222
113
30
32 4557 57
222
113
30
PalladiumÆ Series Door Furniture