OE Electrics Inc - Pip Datasheet July 2020
OE Electrics Inc. [email protected];
www.oeelectrics.comTel: 1-(844) 927-0600 toll free
North America - United Kingdom - Germany - Dubai - Australia
pip
PIP has been designed to provide access to AC power and USB fast-charging in its purest and simplest form.
PIP presents a single AC or patented TUF-R A+C 25W USB charging socket in a wide choice of decorative bezels, offering style, color and finish options to perfectly complement your furniture.
Designed specifically for mounting in furniture or panels, PIP fits into a standard 2.34” (60mm) opening and requires only 1.73” (44mm) of depth. Integrated mounts enable quick installation in most surfaces from 0.03” to 1.18” (0.9mm - 30mm) thick, perfect for panels with limited rear access situations.
UNIQUE SELLING POINTS:
• ‘Cool’ black curves offers a stylish alternative to the desktop
• Available with TUF charger• Part of the ‘polar’ family• UL962A compliant• Available with power sockets from
different nationalities
UNIQUE SELLING POINTS
• Designed for furniture & panel mount• Shallow mounting depth 1.73”• Integral mounting hardware• Base or side exit power cord• AC power socket, TUF-R A+C 25W USB
charger• Wide range of color and finish options
Stainless steel inlay
PAT EN T ED
PA T E N T ED
REVERSIBLE
REPLACEABLE
OE Electrics Inc - Pip Datasheet July 2020
OE Electrics Inc. [email protected];
www.oeelectrics.comTel: 1-(844) 927-0600 toll free
North America - United Kingdom - Germany - Dubai - Australia
pip
Dimensions:
Technical
Configuration:Populate PIP’s aperture with:- 42mm power socket, or - TUF-R A+C 25W USB charger
Construction:Body - Nylon Back bezel - ABS with optional metal inlaySocket fascia - Polycarbonate, TUF-R available in stainless-steel
Colors:Body - blackSocket fascia - black, gray, or stainless-steel (TUF-R only) (NEMA TR sockets - black only)Bezel - black or white molding with optional Custom-8 specialty colors and inlays
Power and cord:PIP is wired as standard with a 32” 14/3 SJT cord to amale GST connector to be used with OE’s pluggableGST system. Available by special order wired with a NEMA 5-15 cord and plug.A starter cord is required for GST option: 72” or 108” 14/3 SJT cord with female GST connector, NEMA plug, and Integral OCP standard.
Quality and Testing:All PIP units are manufactured using ISO9001 quality controlled components and practices, and are 100% tested before shipment • Visual: Configuration and appearance.• Power sockets: Continuity, polarity, insulation &
ground• TUF-R A+C 25W USB charger: Fully function
tested, as well as 4 hour “full-load” soak tested”• Data & AV: 100% continuity tested; all orders are
batch tested for performance compliance
“we test every pin in every socket in every module”
Certifications:cETLus - UL962A / CSA22.2International certifications available upon request.
Cutout dimensions:
PIP can be installed into an industry standard 2.34” (60mm) grommet hole.
0.03-0.12” (0.9mm - 3mm)
MAX 1.18”(30mm)
0.59” MAX DEPTH(15mm)
Mounting thickness:
Snap-in mount Clamp mount Side exit cable mount• Snap-in mount for surfaces 0.03-0.12” (0.9mm - 3mm) thick• Clamp mount for surfaces 0.03-1.18” (0.9mm - 30mm) thick
2.36” (60mm)
1.73”(44mm)
0.22”(5.6mm)
2.91”(74mm)
2.91”(74mm)
See www.oeelectrics.com for full list of available modular components.
Available Modular Components:
UK fused/UnfusedAustralian SwissBrazilian
SchukoUS Nema US Nema TR TUF-R A+C 25W
2.34”(60mm)