20 Wilco Supply, LP • 6003 Armour Drive • Houston, Texas 77020 •Ofice: 713-675-6366 • Fax: 713-676-0201 • Watts: 800-521-5284 • web: www.wilcosupplyinc.com
Petroleum Product Handling Hose
3Parker Hannifin CorporationIndustrial Hose Products www.safehose.com
POLY-CHEM® HoseSeries 7276POLY-CHEM® is a versatile hose handling many types of chemicals and solventsin both full suction and discharge applications. Clear, cross-linked polyethylene tube will not leach and contaminate product conveyed. Refer to the chemical guide in the Safety and Technical Data section of this catalog, or contact Parker to deter-mine compatibility with specific chemicals and applications. Validated permanent crimp specs are available.4:1 Design factor
>> Compatible with 96% of chemicals and solvents.
Tube Cross-Linked Polyethylene (XLPE)
Cover Green EPDM with yellow stripe
Reinforcement Textile Plies with Helix Wire
Temperature Range -20° F to +160° F (-29°C to +71°C) WARNING! Check chemical resistance guide beginning on page 222
Branding PARKER SERIES 7276 POLY-CHEM® HOSE XXX PSI MAX WP MADE IN USA 001
Brand Description Tape Brand - Yellow stripe with green letters
Compare to Goodyear Green XLPE; Titan Exact-Chem; Boston Panther Chemical Transfer
LENGTHS: 100 ft., lengths up to 200 ft. available on quotation.
COUPLINGS: For permanent crimp specifications, refer to CrimpSource. Other available coupling options: Series 7670. For assembly guidelines and additional coupling options, refer to NAHAD Industrial Hose Assembly Guidelines.
Part No.ID
(in.)ID
(mm)Reinf.Plies
OD(in.)
OD(mm)
Approx.Wt. Per100 Ft.
Min.Bend
Radius
Max.Rec.WP
7276-752 ¾ 19.1 2 1.250 31.8 48 3.0 200
7276-1002 1 25.4 2 1.475 37.5 60 4.0 200
7276-1252 1¼ 31.8 2 1.715 43.6 69 5.0 200
7276-1502 1½ 38.0 2 2.000 50.8 97 6.0 200
7276-2002 2 50.8 2 2.545 64.6 133 8.0 200
7276-3002 3 76.2 4 3.675 93.3 259 12.0 150
7276-4002 4 101.6 4 4.720 119.9 357 16.0 150
WARNING! Combination nipple and bands reduce the working pressure of the assembly to less than the hose’s maximum working pressure. Refer to NAHAD Assembly Guidelines for working pressure.!
Applications• Chemical Transport• Storage Tank Transfer
7276
WARNING! Elevated temperatures can change chemical resistance rat-ings. Most chemical resistance guides are based on testing performed at ambient 70°F (21°C) and higher temperatures are likely to change these ratings. Many chemicals will become more aggressive as temperatures increase, reducing the ability of materials to withstand them. It is the users responsibility to determine if the hose is compatible with the application. Compatibility information can be requested from Parker for chemicals at elevated temperatures, it will be necessary for users to perform compati-bility testing if no data exists for the chemical at the temperature desired.
!
HO
SE
Aci
d &
Ch
emic
al
Wilco Supply, LP • 6003 Armour Drive • Houston, Texas 77020 • 21Ofice: 713-675-6366 • Fax: 713-676-0201 • Watts: 800-521-5284 • web: www.wilcosupplyinc.com
Chemical Product Handling Hose
4 Parker Hannifin CorporationIndustrial Hose Products www.safehose.com
Applications• Chemical Transport• Storage Tank Transfer
WARNING! Elevated temperatures can change chemical resistance rat-ings. Most chemical resistance guides are based on testing performed at ambient 70°F (21°C) and higher temperatures are likely to change these ratings. Many chemicals will become more aggressive as temperatures increase, reducing the ability of materials to withstand them. It is the users responsibility to determine if the hose is compatible with the application. Compatibility information can be requested from Parker for chemicals at elevated temperatures, it will be necessary for users to perform compati-bility testing if no data exists for the chemical at the temperature desired. Also, coupling attachment becomes even more critical at elevated tempera-tures. Only permanent crimp, internal expanded or swage style fittings should be installed for applications with temperatures above 125°F. The working pressure of banded assemblies below 125°F should be reduced to maintain a 4:1 design factor based on the assembly burst capability.WARNING! Combination nipple and bands reduce the working pressure of the assembly to less than the hose’s maximum working pressure. Refer to NAHAD Assembly Guidelines for working pressure.
Tube Clear Ultra High Molecular Weight Polyethylene (UHMW)
Cover Corrugated Blue EPDM
Reinforcement Textile Plies with Helix Wire
Temperature Range -40° F to +250° F (-40°C to +121°C) WARNING! Check chemical resistance guide beginning on page 222
Branding PARKER SERIES 7373T BLUE THUNDER™ UHMW TUBE MAX WP XXX PSI MADE IN USA 001
Brand Description Tape Brand - Yellow ink lettering
Compare to Goodyear Fabchem; Gates Renegade; Boston Chemcat; Titan Chem-Lite
Part No.ID
(in.)ID
(mm)Reinf.Plies
OD(in.)
OD(mm)
Approx.Wt. Per100 Ft.
Min.Bend
Radius
Max.Rec.WP
7373T-750 ¾ 19.1 2 1.250 31.8 47 2.5 200
7373T-1000 1 25.4 2 1.475 37.5 61 3.0 200
7373T-1250 1¼ 31.8 2 1.700 43.2 65 4.0 200
7373T-1500 1½ 38.0 2 1.965 49.9 83 5.0 200
7373T-2000 2 50.8 2 2.600 66.0 139 6.0 200
7373T-2500 2½ 63.5 4 3.154 80.1 175 6.5 200
7373T-3000 3 76.2 4 3.645 92.6 218 7.0 200
7373T-4000 4 101.6 4 4.675 118.7 309 8.0 200
LENGTHS: 100 ft., lengths up to 200 ft. on quotation.
COUPLINGS: For permanent crimp specifications, refer to CrimpSource. Other available coupling options: Series 7670. For assembly guidelines and additional coupling options, refer to NAHAD Industrial Hose Assembly Guidelines.
Compatible with 98% of chemicals and solvents>>
!
BLUE THUNDER™ UHMW HoseSeries 7373TThis corrugated hose provides flexibility and durability in chemical full suction and discharge applications. The clear Ultra High Molecular Weight (UHMW) poly-ethylene tube will handle 98% of the most common chemicals without leaching and contaminating the product being conveyed. Refer to the chemical guide in the Safety and Technical Data section of this catalog, or contact Parker to determine compatibility with chemicals and applications.4:1 Design factor
!
7373T
HO
SE
Aci
d &
Ch
emic
al