Liquid Handling
PCR & Molecular BiologyCertified High-Quality Products for PCR, Molecular Biology and Research
sterile · non-pyrogenic · DNA-freeRNase-free · ATP-free
SARSTEDT InternationalYour Partner in medicine and science worldwide
Table of Contents
Sarstedt quality symbols A warranty of reliability and reproducibility p. 4
Biosphere® Purity Certificate p. 4
PCR Performance Tested Purity Certificate p. 4
Pipette tips Crucial for precise dosing p. 5 - 19
Aerosol filters – Protection against carry-over contamination p. 5
Quality guarantee by conformity testing at regular intervals p. 6
Superior shielding with the special ShaftProtect 10µl tip p. 7
Filter tips – Pipetting small volumes from 0.1 – 20µl p. 8 - 9
Filter tips – Pipetting sample volumes from 1 – 1,250µl p. 10 - 11
TipStack Pack reload system p. 12 - 13
Tip SystemBox - Central pipetting station and reload trays p. 12
Tip StackPack / Starter Kit – the economic reload system p .13
Compatibility Table p. 14 - 17
Ordering information on quality pipette tips with and without filter p. 18 - 19
Robotic tips Tips for Biomek pipetting platforms p. 20
Multiply® reaction tubes PCR tubes, strips of 4 and 8 tubes p. 21 - 23
Product description of Multiply® PCR tubes, strips and lids p. 21
Ordering Information for Multiply® PCR tubes, strips and lids p. 22
Accessories: The interchangeable RackSystem for sample preparation p. 23
Multiply® PCR plates White and transparent options in 96/384 well format p. 24 - 31
White PCR plates optimised for qPCR p. 24 - 26
Ordering information for white PCR plates and optical lids p. 26
Transparent PCR plates, w/o skirt, with half and full skirt p. 27 - 28
Ordering information for transparent PCR plates and lids p. 29
Compatibility Table p. 30 - 31
96 Deep well MegaBlock® Free from DNA, DNase/RNase and endotoxins p. 32
Adhesive sealing tapes For qPCR/PCR, automation and sample storage p. 33 - 35
Highly transparent, adhesive qPCR tape p. 33
Transparent tape for end point PCR/storage, strongly adhesive p. 34
Aluminium tape for PCR and sample storage p. 34
Pierceable tape for DNA sequencers, HPLC, autosamplers p. 35
SafeSeal micro tubes 0.5/1.5 and 2.0 ml with secure cap locking feature p. 36 - 37
UV transparent single-use cuvettes For photometric analyses ≥ 220 nm p. 38 - 39
1
AB
CD
EF
GH
23
45
67
89
10 1112
New
New
New
New
New
4
Sarstedt quality symbols - a warranty of reliability and reproducibility
To accommodate the highly sophisticated needs of customers working in the field of medical research, environmental technology, the pharmaceutical and food industries as well as in cellular and molecular biology, Sarstedt has developed the Biosphere® quality products.The superior biological purity of sterile laboratory products is guaranteed by a controlled production process that complies with the strictest purity requirements so that our customers can be sure to achieve utmost reproducibility in their analyses and research experiments.
All disposables, such as pipette tips and reaction tubes bearing the Biosphere® symbol aresterile, DNA-, RNase- and ATP-free and non-pyrogenic.
To reduce storage time of the sterile Biosphere® products in open bags and inherent contamination risks, Biosphere® tubes and plates are packaged in small quantities.
Biosphere® laboratory products are manufacturedin accordance with defined production requirementsand meet the following threshold values:
DNA < 2 x 10-14 g RNase < 1.1 x 10-11 Kunitz unitsATP < 3.5 x 10-15 g Pyrogens < 2 x 10-3 EU
Sterility is validated according to ISO 11135.
PCR and other molecular-biological methods have gained access to laboratories all over the world. Sarstedt has enormously refined the production requirements for non-sterile PCR products. Skilled personnel, clean room conditions along with automated production processes enable contamination-free manufacturing.
Each production batch is subjected to a highly sensitive PCR method toguarantee compliance with the individual quality criteria.
Consequently, award of the PCR Performance Tested quality symbol to a production batch is subject to successfully passing PCR tests.Thanks to this quality grade, customers can use Sarstedt disposables in direct contact with reagents and sample material for PCR in their experimental work.
Products awarded the PCR Performance Tested standard meet the following requirements:
3 DNase-/RNase-free 3Human DNA-free 3PCR inhibitor-free
5
Sarstedt quality symbols - a warranty of reliability and reproducibility High purity Biosphere® Filter tips for pipetting – free from carry-over contamination
Protection against carry-over and contaminationEven the most meticulous pipetting may generate aerosols during aspiration of the sample, contaminating the pipette and any sample material to follow. This cross-contamination cannot be tolerated when working with expensive, hazardous, or irreplaceable samples or when using highly sensitive methods. In order to prevent aerosol contamination along with the resulting consequences (falsified results, additional expenditure in time and cost) Sarstedt incorporates special porous elements in its range of filter tips.
Reliable safety with selected filter materials The filter element integrated in the pipette tips consists of a porous plastic material featuring defined hydrophobic properties and no self-sealing additives.
• The sponge-like material is densely composed of randomly arranged channels (see picture on left), enabling air to pass for precision when using air displacement pipettes.
• Simultaneously, the complex structure of the porous filter safely prevents aerosols from entering the pipette shaft.
Measuring the efficiency of filter inserts in Biosphere® filter tips*Both the PCR-based method and indirect, radioactive measurement of the plasmid DNA with P-32 marked ATP are reliable methods for detecting carry-over contamination of DNA aerosols likely to occur in practical pipetting applications.
• With both methods, the hydrophobic filter inserts with the selected porosity used in Sarstedt Biosphere® filter tips were found to provide protection against aerosol contamination.
• The superior efficiency of the filter in Biosphere® filter tips is based on a complex mechanism of absorption, surface quality, thickness, strength and shape.
* Refer to our “Application Report – Shielding Effect of Filter Inserts in Pipette Tips” for additional details
Added protection with Biosphere® purity quality3 Maximum biological purity: free from DNA, RNase, ATP and pyrogens
3 Batch-specific certification is available upon request
Convenient and safe packaging of individual tip boxes3 Each tip box is additionally and aseptically protected in a special sterile bag packaging
3 Easy opening of bag packaging without aid via notch at short bag side (see picture)
Cross section of a porous filter element (40-fold magnification)
piston
pipette shaft
aerosol
aerosol-free
filter
sample
sealing surfaceof pipette tip
6
A calibrated system: Pipette and pipette tipsThe precision of the pipetting process is primarily determined by the optimal compatibility of the pipette and pipette tip.
• One of the leading manufacturers of pipette tips, Sarstedt’s main objective for years has been to provide customers with tips in optimal, reliable quality to fit most marketable pipette brands.
• The quality of a tip is defined by the properties of the material used, the design and optimum fit on the individual pipettes.
Quality guarantee: Precision and accuracy for small volumesIn particular, the ongoing trend towards ever decreasing small sample volumes inevitably involves increasing demands on the dosing system. At regular intervals, Sarstedt tips are checked for maximum precision and reliability in combination with the pipettes of leading manufacturers (e.g. Eppendorf, Gilson). In addition, the tips are subjected to a defined procedure of comprehensive in-process conformity testing in accordance with the international standard EN ISO 8655 for piston pipettes.
!
Note on availability of a
Declaration of Conformity for
pipette/pipette tip combinations
• The Declaration of Conformity for piston pipettes indicates the combination of pipette and pipette tip to which it applies attesting precision and reliability and can be made available on request.
• The logo on the label indicates that a standard Declaration of Conformity is available for a particular pipette tip.
The pipette tip – Crucial for precise dosing
7
Safe, precise and accurate pipetting down to the base of 1.5/2.0 ml micro tubes with the ShaftProtect 10 µl tip for Gilson P2/P10
• Flexibility & convenient handling
With the dual position tip-ejector* (see illustration), the extended ShaftProtect tip covers as much of the pipette shaft as the short 70.1130.
ShaftProtect10µl tip
Standard10µl tip
non-sterilesterile
Dual position tip-ejector twisted by 180° (Pos. 1/Pos. 2)
in axial direction allowing choose between the long
70.1131 and short 70.1130 tips
180°
Pipette cone sealing position
Dua
l po
sitio
n tip
-eje
cto
r P
os.
1
Dua
l po
sitio
n
tip-e
ject
or P
os. 2
70.1131 70.1130
* All new (since 2003) P2/P10 pipettors from Gilson are equipped with dual position tip-ejector, allowing the use of short tip 70.1130.xxx and „Gilson long“ 70.1131.xxx. Older P2/P10 models need the Gilson ”Service Kit 2”.
Precise pipetting of micro volumes - superior precision and contamination protection with the ShaftProtect 10 µl tip for Gilson P2/P10With most extra long tips the dead volume is extended, which creates adverse effects on performance - but ShaftProtect 70.1131 has been especially developed for Gilson P2/P10 pipettors.
ShaftProtect
10µl
2µl
The pipette tip – Crucial for precise dosing
ShaftProtect 10 µl tip
Filter tip 70.1131.210 0.1 - 10 µl
• Extra-long tip with ShaftProtect for Gilson P2/P10 to protect the inner tube wall against the generally non-sterile pipette shaft
• Identical precision and accuracy thanks to a very small dead volume comparable to the short tip 70.1130
• Enhanced dosing features Especially fine, extra-long 'ShaftProtect' 10 µl tip for easy dosing of even the smallest volumes
• Easy visual control Calibration rings facilitate visual control for micro volumes
• Conformity-tested to EN ISO 8655
• Colour code
!
8
Pipetting small sample volumes 0.1 – 10 µlWorking routinely with micro volumes can adversely affect the pipette / pipette tip dosing system. Therefore, tips to 10 µl feature the following product benefits of enhanced visual control and dosing:
• Enhanced pipetting safety due to calibrated system - conformity-tested to EN ISO 8655
• Easy visual control for micro volumes - calibration rings facilitate visual control of the pipetted volume
• Enhanced dosing features - fine, thin tip facilitates dosing and visual volume control
The pipette tip – Crucial for precise dosing
20 µl
10 µl
2 µl
70.1116.210
!
Filter tip 70.1116.210 0.5 - 20* µl
Universally compatible with Gilson, Eppendorf, or identical designs, e.g . Biohit, Finnpipette, Abimed and Brand for volumes between 0.1 and 10 µl. The fine, extra-long tip and calibration rings facilitate dosing and visual volume control.
* Compatible with Eppendorf Reference 2 - 20 µl and identical pipette models from other manufacturers.
• Conformity tested to EN ISO 8655
• Colour code
10 µl2 µl
70.1130.210/.212
!
Filter tip 70.1130.210/.212 0.1 - 10 µl / 0.1 - 2.5 µl
Mini Gilson tip for Gilson P2/P10 or Eppendorf Research 2.5 µl with finely drawn tip and calibration rings in 2 and 10 µl tips, as well as for versions of identical design from Finnpipette, Biohit and Socorex.
• Conformity tested to EN ISO 8655
• Colour code!
!
9
Pipetting micro volumes from 0.5 to 20 µl – specially designed tip for perfect fit on Eppendorf pipettes Tip with ergonomical and flexible cone, enhanced sealing properties and outstanding precision on Eppendorf pipettes. The cone geometry enables optimal fit and effortless dosing with new generation single- or multi-channel pipettes (e.g. Research plus pipettes). The tip is also compatible with identical pipette models from other manufacturers.
The pipette tip – Crucial for precise dosing
70.1115.210
!
Filter tip 70.1114.210 0.5 to 20 µl
Compatible with 0.5 - 10 µl Eppendorf Research, Research plus, Research pro, Xplorer, Reference 2 - 20 µl and Finnpipette Digital 0.2 - 2 µl, as well as models of identical design.
• 46 mm tip length enables safe pipetting down to the bottom of deep vials
• Cone geometry optimised for 8- and 12-channel pipettes
• Graduation rings without interfering ridges for easy dosing into vials
• Extra thin tip for enhanced dosing of micro volumes
• Visual control of micro volumes Graduation rings at 2, 10 and 20 µl
• Conformity tested to EN ISO 8655
• Colour code!
Now available with perforated temper-evident closureNEW
Filter tip 70.1115.210 0.5 - 10 µl
Type “crystal tip” for Eppendorf 0.5 - 10 µl, Reference/Research or identical designs, e.g. Finnpipette.
• Conformity tested to EN ISO 8655
• Colour code
!
10µl
20µl
2µl
New
10
Filter tip 70.765.210 10 - 300 µl
Specially suited for multi-channel pipettes, e.g. from Eppendorf, Brand, Finnpipette, Biohit. Also compatible with older multi-channel pipettes up to 200 µl.55.6 mm tip with 4 graduations for visual control of pre-set pipetting volume at 50, 100, 200 and 300 µl.
• Conformity tested to EN ISO 8655
• Colour code
200 µl
100 µl
70.765.210
50 µl
!
300 µl
70.760.212/.213
!
Filter tip 70.760.212/.213 2 - 100 µl
Yellow standard pipette tip for pipettes from Eppendorf, Gilson, Biohit, Brand, Socorex as well as identical designs, and additional filter tip option of 20 µl volume (70.760.213).
• Conformity tested to EN ISO 8655
• Colour code
Pipetting sample volumes 2 - 300 µl
70.760.211
!
Filter tip 70.760.211 2 - 200 µl
Standard pipette tip for pipettes from Eppendorf, Gilson, Biohit, Finnpipette, Socorex and identical designs.
• Conformity tested to EN ISO 8655
• Colour code
The pipette tip – Crucial to precise dosing
!
!
!
11
Pipetting large sample volumes up to 1,250 µl
• Two pipette tips with graduation rings for volumes between 1 and 1,250 µl
• Saves space as a large volume range is covered with 2 tips only
• Colour-coded trays enable easy volume identification
• Highly transparent tip material for enhanced pipetting control
70.1186.210
1,000 µl
500 µl
200 µl
Filter tip 70.1186.210 50 - 1,250 µl, extra long
Extra long (103 mm) and slim pipette tip, universally suited for use with single-channel pipettes, e.g. from Gilson, Biohit, Nichyrio and Finnpipette. Particularly recommended for applications in Deep Well blocks, Cluster tubes or 5 ml CryoPure tubes for which the traditional 1,000 µl tip is too short or too thick. Compatible with multi-channel pipette Finnpipette Novus 100 to 1,200 µl. 3 Graduations for visual control of pre-set pipetting volume at 200, 500 and 1,000 µl.
- Empty box without pipette tips 95.1763, 8 pcs./case
• Colour code
70.762.211
!
Filter tip 70.762.211 50 - 1,000 µl
Blue standard tip for Eppendorf, Gilson, Finnpipette, Biohit, Brand, Socorex and identical designs.
- Empty box without pipette tips 95.1762, 10 pcs./case
• Conformity tested to EN ISO 8655
• Colour code
The pipette tip – Crucial to precise dosing
200 µl
50 µl
100 µl
Filter tip 70.1189.215* 1 - 200 µl, extra long
Extra long and slim 200 µl tip for 20, 50, 100 and 200 µl pipettes. Designed for universal use on a pipette volume range between 2 and 200 µl: Eppendorf Reference, Research, Biohit mLine, -Proline, -Proline Electronic, HTL, Labnet, Finnpipette, Nichiryo Benchmate, Gilson, Rainin, CappAero, CappTronic Electronic and identical designs.
- Soft, flexible cone for easy assembly and ejection- 77 mm length for reaching into tubes- One pipette accommodates 4 different volumes- Graduation rings without interfering ridges at 10, 50, 100 and 200 µl for visual control of the defined pipetting volume
• Colour code
70.1189.215
10 µl
NEW
!
* Expected September 2011
12
Empty reload tray for use in the Tip SystemBoxUsers purchasing tips from our range loose in bags can load tips into empty trays (grey, yellow, orange) in the Tip SystemBox.
• Place empty trays into the Tip SystemBox and load with tips.
• Autoclave tips in the Tip SystemBox, if required. See important notes on autoclaving on page 20.
The Tip SystemBox: Central Pipetting Station
Simple and practical
Flexible and cost-effective
Empty 96-tip refill trays and bulk tipsSuitable for manually racking bulk tips for autoclaving and convenient handling.*
Economic and environmentally friendly
Tip StackPack Efficient handling of 96-tip trays, reduced packaging and storage space
Ordering Information empty reload trays
Coloured trays for easy tip volume identification
Order No. Tray colour code Tip type** / Volume Packaging (pcs./case)
95.1760.011 A, C / 200 µl 25
95.1760.022 D, J, N / 20 µl 25
95.1760.033 E long / 10 µl 25
95.1760.034 E / 10 µl 25
95.1760.044 L / 300 µl 20
* Important notes on autoclaving: See page 20** Pipette type see page 18 to 19
Tip SystemBox - Methodical tip processing
13
* Important notes on autoclaving: See page 20
Ordering Information Tip StackPack Starter Kit
Order No. Volume Pipette tip colour Colour code Packaging/case
70.760.591 250 µl neutral3 x Tip StackPack
+1 x Tip SystemBox
70.760.592 200 µl yellow
70.1130.690 10 µl neutral
Tip StackPack Starter KitThe Tip StackPack Starter Kit contains 3 Tip StackPacks and 1 Tip SystemBox each
Tip StackPack reload systemTips are preloaded in stacked trays of 96 tips each, stacked on top of each other. The base section and cover are designed for multiple use in combination with the 5 or 6 tip trays. As a result, composite materials and storage space are reduced by more than 50%.
• Space-saving
• Easy to use
• Reduced waste volumes
• Tip StackPack Starter Kit (3 x Tip StackPack + 1 Tip SystemBox)
Ordering Information for Tip StackPack see page 19
Economic and environmentally friendly• Easy transfer of individual layers of 96-tip trays into the Tip SystemBox for easy handling or autoclaving in the pipette tip box*
• Safety labels applied on both sides can be easily perforated to access the next layer of tips
• Trays can be placed into the Tip SystemBox without further adjustment
• Tips can also be used directly from the stack
Ordering Information Tip SystemBox
Order No. Description Packagingpcs./case
95.1298.001Tip SystemBox (without Pipette tips),
empty box6
Safety labels appliedon both sides can
be easily perforated to access the next
layer of 96 tips
Tip SystemBox - Methodical tip processing
14
Biosphere®-Pipette Tips with filter (illustrations 60%)
Eppendorf Pipettes Thermo Finnpipettes Gilson Pipettes
Eppendorf Reference Eppendorf Research Eppendorf Research plus Eppendorf Research pro Xplo-rer Finnpipette Digital / F1 / F2 Finnpipette Focus Finnpipette Novus Bio
Control Pipetman / Ultra / Concept
0.1-
2.5
µl
0.5-
10 µ
l
2-20
µl
2-20
µl
10-1
00 µ
l
50-2
00 µ
l
100-
1,00
0 µl
0.1-
2.5
µl
0.5-
10 µ
l
2-20
µl
10-1
00 µ
l
20-2
00 µ
l
30-3
00 µ
l MC
100-
1,00
0 µl
500-
5,00
0 µl
1-10
ml
0.5-
10 µ
l MC
2-20
µl
10-1
00 µ
l
20-2
00 µ
l
30-3
00 µ
l MC
100-
1,00
0 µl
500-
5,00
0 µl
1-10
ml
0.5-
10 µ
l
0.5-
10 µ
l MC
5-10
0 µl
5-10
0 µl
MC
20-3
00 µ
l
20-3
00 µ
l MC
50-1
,000
µl
50-1
,200
µl M
C
100-
5,00
0 µl
0.5-
10 µ
l MC
0.2-
2 µl
F2 0
.5-5
µl
F1 1
-10
µl
0.5-
10 µ
l Uni
v.
0.5-
10 µ
l MC
2-20
µl U
niv.
5-50
µl M
C
10-1
00 µ
l Univ
.
20-2
00 µ
l Univ
.
50-3
00 µ
l MC
100-
1,00
0 µl
200-
1,00
0 µl
0.3-
3 µl
0.5-
5 µl
1-10
µl
30-3
00 µ
l
100-
1,00
0 µl
30-3
00 µ
l
30-3
00 µ
l MC
100-
1,00
0 µl
100-
1,20
0 µl
MC
50-3
00 µ
l MC
P2/U
2 0.
2-2
µl
P10/U
10 0
.1-10
µl
C8/C
12 1
-10
µl
P20/
U20
2-20
µl
P100
/U10
020
-100
µl
P200
/U20
020
-200
µl
U8 2
0-30
0 µl
P100
0/U1
000
200-
1,00
0 µl
P5,0
00/U
5,00
01,
000-
5,00
0 µl
P10/
U10
1-10
ml
2.5
µl
70.1130.212 3 32.5
32.5 3 3
2.532.5
32.5
32.5 3 3
2.532.5 3 3
2.532.5 3 3
2.5 ✗
10 µ
l 70.1130.21070.1130.410 3 3
10 ✗ 3 3 3 3 3 3 3 3 3 3 3 ✗
10 µ
l
70.1131.210 ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ 3 3 3
10 µ
l 70.1115.21070.1115.410 3 3 3
10 3 3 3 3 3 3 3 3 3 ✗ ✗ ✗
20 µ
l 70.1114.21070.1114.410 ✗ 3 3 ✗ 3 3 3 3 3 3 3 3 3 3 3 3 3
20 µ
l
70.1116.210 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 ✗
20 µ
l 70.760.21370.760.413 3 3
20320 ✗ 3
20320 ✗ 3 3
20 3 ✗ 320
320 3 3
20 ✗ 3 320
100
µl 70.760.21270.760.412 3 3 3
100 3 3 3100 ✗ 3 3 3
100 ✗ 3 3 3 3100
3100 ✗ ✗ 3
200
µl
70.1189.215 3 3 3 3 3 3 3 33 3 3 33 3 3 3
200
µl 70.760.21170.760.411 3 3 3 3 ✗ 3 ✗ 3
2003200 ✗ ✗ 3 3
2003200
3200 ✗ ✗ 3 ✗
300
µl
70.765.210 ✗ ✗ 3 ✗ ✗ 3 3 3 3 3 3 ✗ ✗ 3 3 3 3 ✗ ✗ 3 3
1,00
0 µl
70.762.21170.762.411 3 3 3 3 ✗ 3 3 3 3 3
1,25
0 µl
70.1186.21070.1186.410 3 3 3 3 3 3 3 3 3 3
Compatibility Table - Pipette Tips
Quality Pipette Tips without filter* (illustrations 60%) Eppendorf Reference Eppendorf Research Eppendorf Research plus Eppendorf Research pro Xplo-rer Finnpipette Digital / F1 / F2 Finnpipette Focus Finnpipette Novus Bio
Control Pipetman / Ultra / Concept
10 µ
l 70.113070.1130.10070.1130.20070.1130.600
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 ✗
10 µ
l 70.113170.1131.100 ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ 3 3 3
20 µ
l 70.111470.1114.10070.1114.200
✗ 3 3 ✗ 3 3 3 3 3 3 3 3 3 3 3 3 3 3
20 µ
l 70.111570.1115.10070.1115.200
3 3 3 3 3 3 3 3 3 3 3 3 3 ✗
20 µ
l 70.111670.1116.10070.1116.200
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 ✗
200
µl
70.760.00270.760.10270.760.20270.760.502
3 3 3 3 3 3 ✗ 3 3 3 ✗ 3 3 3 3 3 3200 ✗ 3 3 3
200
200
µl
70.1189.105 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
250
µl 70.760.00170.760.20170.760.501
3 3 3 3 ✗ 3 ✗ 3250
3250 ✗ ✗ 3 3
250 ✗ ✗ 3 3250
300
µl 70.76570.765.10070.765.200
✗ ✗ 3 ✗ ✗ 3 3 ✗ ✗ 3 3 ✗ ✗ 3 3 ✗ ✗ 3 3 3 3 3 3 ✗ ✗ 3 3
1,00
0 µl 70.762
70.762.10070.762.200
3 3 3 3 ✗ 3 3 3 3 ✗ 3
1,25
0 µl 70.1186
70.1186.10070.1186.200
3 3 3 3 3 3 3 3 3 3
5 m
l
Scale 1:2
70.1183.00170.1183.101 ✗ ✗ ✗ 3
5 m
l
Scale 1:2
70.1183.00270.1183.102 3 3 3 ✗
10 m
l
Scale 1:2
70.1187.00170.1187.101 3 3 3
NEW
NEW
NEW
NEW
Legend: = max. pipetting volume
= limited pipetting volume
= not recommended
310✗
= not checked
MC = Multi-channel pipette
15
Biosphere®-Pipette Tips with filter (illustrations 60%)
Eppendorf Pipettes Thermo Finnpipettes Gilson Pipettes
Eppendorf Reference Eppendorf Research Eppendorf Research plus Eppendorf Research pro Xplo-rer Finnpipette Digital / F1 / F2 Finnpipette Focus Finnpipette Novus Bio
Control Pipetman / Ultra / Concept
0.1-
2.5
µl
0.5-
10 µ
l
2-20
µl
2-20
µl
10-1
00 µ
l
50-2
00 µ
l
100-
1,00
0 µl
0.1-
2.5
µl
0.5-
10 µ
l
2-20
µl
10-1
00 µ
l
20-2
00 µ
l
30-3
00 µ
l MC
100-
1,00
0 µl
500-
5,00
0 µl
1-10
ml
0.5-
10 µ
l MC
2-20
µl
10-1
00 µ
l
20-2
00 µ
l
30-3
00 µ
l MC
100-
1,00
0 µl
500-
5,00
0 µl
1-10
ml
0.5-
10 µ
l
0.5-
10 µ
l MC
5-10
0 µl
5-10
0 µl
MC
20-3
00 µ
l
20-3
00 µ
l MC
50-1
,000
µl
50-1
,200
µl M
C
100-
5,00
0 µl
0.5-
10 µ
l MC
0.2-
2 µl
F2 0
.5-5
µl
F1 1
-10
µl
0.5-
10 µ
l Uni
v.
0.5-
10 µ
l MC
2-20
µl U
niv.
5-50
µl M
C
10-1
00 µ
l Univ
.
20-2
00 µ
l Univ
.
50-3
00 µ
l MC
100-
1,00
0 µl
200-
1,00
0 µl
0.3-
3 µl
0.5-
5 µl
1-10
µl
30-3
00 µ
l
100-
1,00
0 µl
30-3
00 µ
l
30-3
00 µ
l MC
100-
1,00
0 µl
100-
1,20
0 µl
MC
50-3
00 µ
l MC
P2/U
2 0.
2-2
µl
P10/U
10 0
.1-10
µl
C8/C
12 1
-10
µl
P20/
U20
2-20
µl
P100
/U10
020
-100
µl
P200
/U20
020
-200
µl
U8 2
0-30
0 µl
P100
0/U1
000
200-
1,00
0 µl
P5,0
00/U
5,00
01,
000-
5,00
0 µl
P10/
U10
1-10
ml
2.5
µl
70.1130.212 3 32.5
32.5 3 3
2.532.5
32.5
32.5 3 3
2.532.5 3 3
2.532.5 3 3
2.5 ✗
10 µ
l 70.1130.21070.1130.410 3 3
10 ✗ 3 3 3 3 3 3 3 3 3 3 3 ✗
10 µ
l
70.1131.210 ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ 3 3 3
10 µ
l 70.1115.21070.1115.410 3 3 3
10 3 3 3 3 3 3 3 3 3 ✗ ✗ ✗
20 µ
l 70.1114.21070.1114.410 ✗ 3 3 ✗ 3 3 3 3 3 3 3 3 3 3 3 3 3
20 µ
l
70.1116.210 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 ✗
20 µ
l 70.760.21370.760.413 3 3
20320 ✗ 3
20320 ✗ 3 3
20 3 ✗ 320
320 3 3
20 ✗ 3 320
100
µl 70.760.21270.760.412 3 3 3
100 3 3 3100 ✗ 3 3 3
100 ✗ 3 3 3 3100
3100 ✗ ✗ 3
200
µl
70.1189.215 3 3 3 3 3 3 3 33 3 3 33 3 3 3
200
µl 70.760.21170.760.411 3 3 3 3 ✗ 3 ✗ 3
2003200 ✗ ✗ 3 3
2003200
3200 ✗ ✗ 3 ✗
300
µl
70.765.210 ✗ ✗ 3 ✗ ✗ 3 3 3 3 3 3 ✗ ✗ 3 3 3 3 ✗ ✗ 3 3
1,00
0 µl
70.762.21170.762.411 3 3 3 3 ✗ 3 3 3 3 3
1,25
0 µl
70.1186.21070.1186.410 3 3 3 3 3 3 3 3 3 3
Quality Pipette Tips without filter* (illustrations 60%) Eppendorf Reference Eppendorf Research Eppendorf Research plus Eppendorf Research pro Xplo-rer Finnpipette Digital / F1 / F2 Finnpipette Focus Finnpipette Novus Bio
Control Pipetman / Ultra / Concept
10 µ
l 70.113070.1130.10070.1130.20070.1130.600
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 ✗
10 µ
l 70.113170.1131.100 ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ 3 3 3
20 µ
l 70.111470.1114.10070.1114.200
✗ 3 3 ✗ 3 3 3 3 3 3 3 3 3 3 3 3 3 3
20 µ
l 70.111570.1115.10070.1115.200
3 3 3 3 3 3 3 3 3 3 3 3 3 ✗
20 µ
l 70.111670.1116.10070.1116.200
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 ✗
200
µl
70.760.00270.760.10270.760.20270.760.502
3 3 3 3 3 3 ✗ 3 3 3 ✗ 3 3 3 3 3 3200 ✗ 3 3 3
200
200
µl
70.1189.105 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
250
µl 70.760.00170.760.20170.760.501
3 3 3 3 ✗ 3 ✗ 3250
3250 ✗ ✗ 3 3
250 ✗ ✗ 3 3250
300
µl 70.76570.765.10070.765.200
✗ ✗ 3 ✗ ✗ 3 3 ✗ ✗ 3 3 ✗ ✗ 3 3 ✗ ✗ 3 3 3 3 3 3 ✗ ✗ 3 3
1,00
0 µl 70.762
70.762.10070.762.200
3 3 3 3 ✗ 3 3 3 3 ✗ 3
1,25
0 µl 70.1186
70.1186.10070.1186.200
3 3 3 3 3 3 3 3 3 3
5 m
l
Scale 1:2
70.1183.00170.1183.101 ✗ ✗ ✗ 3
5 m
l
Scale 1:2
70.1183.00270.1183.102 3 3 3 ✗
10 m
l
Scale 1:2
70.1187.00170.1187.101 3 3 3
Pipette suppliers occasionally rework or carry out technical modifications to the pipette cones of their pipettors so that the information provided in the Compatibility Table constitutes a recommendation only. In case of doubt, free sample tips are available on request to test the optimum fitting and ejection behaviour of our tips when used on your pipettes.
* Important notes on autoclaving see page 20
16
Quality Pipette Tips without filter* (illustrations 60%) mLine Mechanical Proline Mechanical eLine Electronic Transferpette Digital Transferpette S Transferpette Electronic Calibra Manual Micro 822 C. M. Multi 852 Acura Manual Micro 825Acura Electro Micro 925
A. 835/935e
Acura Multi 855/955e
10 µ
l 70.113070.1130.10070.1130.20070.1130.600
3 3 3 3 3 3 3 3 ✗ 3 3 3 3 3 3 3 3 3 3 3 3
10 µ
l 70.113170.1131.100 ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
20 µ
l 70.111470.1114.10070.1114.200
3 3 3 3
20 µ
l 70.111570.1115.10070.1115.200
✗ ✗ 3 3 ✗ 3 3 3 3 3 3 3 3 ✗ 3 3 ✗
20 µ
l 70.111670.1116.10070.1116.200
3 3 3 3 3 ✗ 3 3 ✗ 3 3 3 3 3 3 3 3 ✗ 3 3
200
µl
70.760.00270.760.10270.760.20270.760.502
✗ 3 ✗ 3 3 ✗ ✗ ✗ ✗ 3 3 3 ✗ ✗ 3 3 3 ✗ 3 3 3 3 3 3 3 3 3 3 3 3 3 3
200
µl
70.1189.105 3 3 3 3 3 3
250
µl 70.760.00170.760.20170.760.501
✗ 3 3 3 3 3 3250 ✗ 3 3 3 ✗ ✗ 3 3 3 ✗ 3 ✗ ✗ ✗ 3 ✗ ✗ ✗ ✗ ✗ ✗ 3 ✗ 3
300
µl 70.76570.765.10070.765.200
✗ 3 3 ✗ ✗ 3 3 3 3 ✗ ✗ ✗ 3 3 ✗ ✗ 3 ✗ 3 ✗ ✗ ✗ 3 ✗ ✗ ✗ ✗ 3 3 3 ✗ 3
1,00
0 µl 70.762
70.762.10070.762.200
3 3 3 ✗ 3 3 3 3 3 3
1,25
0 µl 70.1186
70.1186.10070.1186.200
3 3 ✗ 3 3 ✗ 3 3 3
5 m
l
Scale 1:2
70.1183.00170.1183.101 ✗ ✗ ✗ ✗
5 m
l
Scale 1:2
70.1183.00270.1183.102 3 3 3 3
10 m
l
Scale 1:2
70.1187.00170.1187.101 3 ✗
Biosphere®-Pipette Tips with filter (illustrations 60%)
Biohit Pipettes Brand Pipettes Socorex Manual / Electronic Pipettes
mLine Mechanical Proline Mechanical eLine Electronic Transferpette Digital Transferpette S Transferpette Electronic Calibra Manual Micro 822 C. M. Multi 852 Acura Manual Micro 825Acura Electro Micro 925
A. 835/935e
Acura Multi 855/955e
0.5-
10 µ
l
0.5-
10 µ
l MC
2-20
µl
10-1
00 µ
l
20-2
00 µ
l
30-3
00 µ
l MC
100-
1,00
0 µl
100-
5,00
0 µl
0.1-
2.5
µl
0.5-
10 µ
l
5-50
µl
5-50
µl M
C
20-2
00 µ
l
50-2
50 µ
l MC
50-3
00 µ
l MC
100-
1,00
0 µl
100-
5,00
0 µl
0.2-
10 µ
l
10-3
00 µ
l
50-1
,000
µl
50-1
,200
µl M
C
100-
5,00
0 µl
0.1-
1 µl
0.5-
10 µ
l
2-20
µl
2-20
µl
5-50
µl
10-1
00 µ
l
20-2
00 µ
l
30-3
00 µ
l MC
25-2
50 µ
l
100-
1,00
0 µl
0.1-
1 µl
0.5-
10 µ
l
0.5-
10 µ
l MC
2-20
µl
10-1
00 µ
l
20-2
00 µ
l
30-3
00 µ
l MC
100-
1,00
0 µl
1-10
ml
0.5-
10 µ
l
0.5-
10 µ
l MC
2-20
µl
1-20
µl M
C
20-2
00 µ
l
100-
1,00
0 µl
0.2-
2 µl
1-10
µl
1-10
µl
2-20
µl
10-1
00 µ
l
20-2
00 µ
l
100-
1,00
0 µl
1-10
µl
10-1
00 µ
l
20-2
00 µ
l
0.1-
2 µl
0.5-
10 µ
l
1-10
µl
2-20
µl
5-50
µl
10-1
00 µ
l
10-2
00 µ
l
100-
1,00
0 µl
0.5-
5 m
l
0.5-
10 µ
l MC
5-50
µl M
C
20-2
00 µ
l MC
2.5
µl
70.1130.212 32.5
32.5 3 3
2.532.5 ✗ 3
2.532.5 ✗ 3
2.532.5
32.5
32.5
32.5
32.5 3 3
2.532.5 3 ✗ 3
2.5
10 µ
l 70.1130.21070.1130.410 3 3 3 3 ✗ 3 3
10 ✗ 3 3 3 3 3 3 3 3 3 3 3 3
10 µ
l
70.1131.210 ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
10 µ
l 70.1115.21070.1115.410 ✗ ✗ 3 3
10 ✗ 3 3 3 3 310310 3 3 ✗ 3 3 ✗
20 µ
l 70.1114.21070.1114.410 3 3 3 ✗ 3 3 3 3
20 µ
l
70.1116.210 3 3 3 3 3 ✗ 3 3 ✗ 3 3 3 3 3 3 ✗ ✗ ✗ 3 3
20 µ
l 70.760.21370.760.413 ✗ ✗ ✗ 3
20320 ✗ ✗ ✗ ✗ 3 3 3
20 ✗ ✗ 3 320320 ✗ 3
20310 3 3
20 ✗ 3 ✗ 3 3 320320 ✗ 3 ✗
100
µl 70.760.21270.760.412 ✗ 3
100 3 3 3100 ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ 3
100 ✗3100 ✗ ✗ ✗ 3
100 ✗ 3 ✗ ✗ 3 3 3100 3 3
100
200
µl
70.1189.215 3 3 3 3 3 3 3 3 3
200
µl 70.760.21170.760.411 ✗ 3 ✗ ✗ 3 3
2003200 ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ 3 ✗ 3
100 ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ 3 ✗ 3
300
µl
70.765.210 ✗ 3 3 ✗ ✗ 3 3 3 3 ✗ ✗ ✗ 3 3 ✗ ✗ 3 ✗ 3 ✗ ✗ ✗ 3 ✗ ✗ ✗ ✗ ✗ ✗ 3 ✗ 3
1,00
0 µl
70.762.21170.762.411 3 3 3 ✗ ✗ 3 3 3 3 3
1,25
0 µl
70.1186.21070.1186.410 3 3 ✗ ✗ 3 3 3 3 3
Compatibility Table - Pipette Tips
NEW
NEW
NEW
NEW
Legend: = max. pipetting volume
= limited pipetting volume
= not recommended
310✗
= not checked
MC = Multi-channel pipette
17
Quality Pipette Tips without filter* (illustrations 60%) mLine Mechanical Proline Mechanical eLine Electronic Transferpette Digital Transferpette S Transferpette Electronic Calibra Manual Micro 822 C. M. Multi 852 Acura Manual Micro 825Acura Electro Micro 925
A. 835/935e
Acura Multi 855/955e
10 µ
l 70.113070.1130.10070.1130.20070.1130.600
3 3 3 3 3 3 3 3 ✗ 3 3 3 3 3 3 3 3 3 3 3 3
10 µ
l 70.113170.1131.100 ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
20 µ
l 70.111470.1114.10070.1114.200
3 3 3 3
20 µ
l 70.111570.1115.10070.1115.200
✗ ✗ 3 3 ✗ 3 3 3 3 3 3 3 3 ✗ 3 3 ✗
20 µ
l 70.111670.1116.10070.1116.200
3 3 3 3 3 ✗ 3 3 ✗ 3 3 3 3 3 3 3 3 ✗ 3 3
200
µl
70.760.00270.760.10270.760.20270.760.502
✗ 3 ✗ 3 3 ✗ ✗ ✗ ✗ 3 3 3 ✗ ✗ 3 3 3 ✗ 3 3 3 3 3 3 3 3 3 3 3 3 3 3
200
µl
70.1189.105 3 3 3 3 3 3
250
µl 70.760.00170.760.20170.760.501
✗ 3 3 3 3 3 3250 ✗ 3 3 3 ✗ ✗ 3 3 3 ✗ 3 ✗ ✗ ✗ 3 ✗ ✗ ✗ ✗ ✗ ✗ 3 ✗ 3
300
µl 70.76570.765.10070.765.200
✗ 3 3 ✗ ✗ 3 3 3 3 ✗ ✗ ✗ 3 3 ✗ ✗ 3 ✗ 3 ✗ ✗ ✗ 3 ✗ ✗ ✗ ✗ 3 3 3 ✗ 3
1,00
0 µl 70.762
70.762.10070.762.200
3 3 3 ✗ 3 3 3 3 3 3
1,25
0 µl 70.1186
70.1186.10070.1186.200
3 3 ✗ 3 3 ✗ 3 3 3
5 m
l
Scale 1:2
70.1183.00170.1183.101 ✗ ✗ ✗ ✗
5 m
l
Scale 1:2
70.1183.00270.1183.102 3 3 3 3
10 m
l
Scale 1:2
70.1187.00170.1187.101 3 ✗
Biosphere®-Pipette Tips with filter (illustrations 60%)
Biohit Pipettes Brand Pipettes Socorex Manual / Electronic Pipettes
mLine Mechanical Proline Mechanical eLine Electronic Transferpette Digital Transferpette S Transferpette Electronic Calibra Manual Micro 822 C. M. Multi 852 Acura Manual Micro 825Acura Electro Micro 925
A. 835/935e
Acura Multi 855/955e
0.5-
10 µ
l
0.5-
10 µ
l MC
2-20
µl
10-1
00 µ
l
20-2
00 µ
l
30-3
00 µ
l MC
100-
1,00
0 µl
100-
5,00
0 µl
0.1-
2.5
µl
0.5-
10 µ
l
5-50
µl
5-50
µl M
C
20-2
00 µ
l
50-2
50 µ
l MC
50-3
00 µ
l MC
100-
1,00
0 µl
100-
5,00
0 µl
0.2-
10 µ
l
10-3
00 µ
l
50-1
,000
µl
50-1
,200
µl M
C
100-
5,00
0 µl
0.1-
1 µl
0.5-
10 µ
l
2-20
µl
2-20
µl
5-50
µl
10-1
00 µ
l
20-2
00 µ
l
30-3
00 µ
l MC
25-2
50 µ
l
100-
1,00
0 µl
0.1-
1 µl
0.5-
10 µ
l
0.5-
10 µ
l MC
2-20
µl
10-1
00 µ
l
20-2
00 µ
l
30-3
00 µ
l MC
100-
1,00
0 µl
1-10
ml
0.5-
10 µ
l
0.5-
10 µ
l MC
2-20
µl
1-20
µl M
C
20-2
00 µ
l
100-
1,00
0 µl
0.2-
2 µl
1-10
µl
1-10
µl
2-20
µl
10-1
00 µ
l
20-2
00 µ
l
100-
1,00
0 µl
1-10
µl
10-1
00 µ
l
20-2
00 µ
l
0.1-
2 µl
0.5-
10 µ
l
1-10
µl
2-20
µl
5-50
µl
10-1
00 µ
l
10-2
00 µ
l
100-
1,00
0 µl
0.5-
5 m
l
0.5-
10 µ
l MC
5-50
µl M
C
20-2
00 µ
l MC
2.5
µl
70.1130.212 32.5
32.5 3 3
2.532.5 ✗ 3
2.532.5 ✗ 3
2.532.5
32.5
32.5
32.5
32.5 3 3
2.532.5 3 ✗ 3
2.5
10 µ
l 70.1130.21070.1130.410 3 3 3 3 ✗ 3 3
10 ✗ 3 3 3 3 3 3 3 3 3 3 3 3
10 µ
l
70.1131.210 ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
10 µ
l 70.1115.21070.1115.410 ✗ ✗ 3 3
10 ✗ 3 3 3 3 310310 3 3 ✗ 3 3 ✗
20 µ
l 70.1114.21070.1114.410 3 3 3 ✗ 3 3 3 3
20 µ
l
70.1116.210 3 3 3 3 3 ✗ 3 3 ✗ 3 3 3 3 3 3 ✗ ✗ ✗ 3 3
20 µ
l 70.760.21370.760.413 ✗ ✗ ✗ 3
20320 ✗ ✗ ✗ ✗ 3 3 3
20 ✗ ✗ 3 320320 ✗ 3
20310 3 3
20 ✗ 3 ✗ 3 3 320320 ✗ 3 ✗
100
µl 70.760.21270.760.412 ✗ 3
100 3 3 3100 ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ 3
100 ✗3100 ✗ ✗ ✗ 3
100 ✗ 3 ✗ ✗ 3 3 3100 3 3
100
200
µl
70.1189.215 3 3 3 3 3 3 3 3 3
200
µl 70.760.21170.760.411 ✗ 3 ✗ ✗ 3 3
2003200 ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ 3 ✗ 3
100 ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ 3 ✗ 3
300
µl
70.765.210 ✗ 3 3 ✗ ✗ 3 3 3 3 ✗ ✗ ✗ 3 3 ✗ ✗ 3 ✗ 3 ✗ ✗ ✗ 3 ✗ ✗ ✗ ✗ ✗ ✗ 3 ✗ 3
1,00
0 µl
70.762.21170.762.411 3 3 3 ✗ ✗ 3 3 3 3 3
1,25
0 µl
70.1186.21070.1186.410 3 3 ✗ ✗ 3 3 3 3 3
Pipette suppliers occasionally rework or carry out technical modifications to the pipette cones of their pipettors so that the information provided in the Compatibility Table constitutes a recommendation only. In case of doubt, free sample tips are available on request to test the optimum fitting and ejection behaviour of our tips when used on your pipettes.
* Important notes on autoclaving see page 20
18
Filter tips(illustrations 1:1) Order No.
Max. SampleVolume/Colour
QualityGrade Packaging
Type E70.1130.212 2.5 µl, neutral
96/box480/inner box
1,920/case
Type E70.1130.210 10 µl, neutral
96/box480/inner box
1,920/case
70.1130.410 10 µl, neutral480/bag (loose)
4,800/case
Type E long 70.1131.210 10 µl, neutral
96/box480/inner box
1,920/case
Type D70.1115.210 10 µl, neutral
96/box480/inner box
1,920/case
70.1115.410 10 µl, neutral480/bag (loose)
4,800/case
Type N70.1114.210 20 µl, neutral
96/box480/inner box
1,920/case
70.1114.410 20 µl, neutral480/bag (loose)
4,800/case
Type J70.1116.210 20 µl, neutral
96/box480/inner box
1,920/case
Type A70.760.213 20 µl, yellow
96/box480/inner box
1,920/case
70.760.413 20 µl, yellow480/bag (loose)
4,800/case
Type A70.760.212 100 µl, yellow
96/box480/inner box
1,920/case
70.760.412 100 µl, yellow480/bag (loose)
4,800/case
Type Oextra long 70.1189.215* 200 µl, neutral 96/box
960/case
Type C70.760.211 200 µl, neutral
96/box480/inner box
1,920/case
70.760.411 200 µl, neutral480/bag (loose)
4,800/case
Type L70.765.210 300 µl, neutral
96/box480/inner box
1,920/case
Type B70.762.211 1,000 µl, blue
100/box500/inner box
1,000/case
70.762.411 1,000 µl, blue200/bag (loose)
2,000/case
Type M70.1186.210
1,250 µl, neutral
96/box768/case
70.1186.4101,250 µl, neutral
384/bag (loose)3,840/case
Ordering Information - Quality tips with filter
* Expected September 2011
NEW
NEW
19
Ordering Information - Quality tips with filter
* Expected September 2011
Refer to pp. 14 to 17 or see Catalogue for further information
Ordering Information - Quality tips without filter
Tips without filter(illustrations 1:1) Order No.
Max. SampleVolume/Colour
QualityGrade Packaging
Type E 70.1130
10 µl, neutral
1,000/bag, 10,000/case
70.1130.100 96/box, 1,920/case
70.1130.200 96/box, 480/inner case, 1,920/case
70.1130.600 Tip StackPack96/tray, 576/StackPack,
2,304/case70.1130.460
70.1130.690 Tip StackPack Starter Kit
Type E long 70.1131 10 µl, neutral
500/bag, 10,000/case
70.1131.100 96/box, 1,920/case
Type D 70.111510 µl, neutral
1,000/bag, 10,000/case
70.1115.100 96/box, 1,920/case
70.1115.200 96/box, 480/inner case, 1,920/case
Type N 70.111420 µl, neutral
1,000/bag, 10,000/case
70.1114.100 96/box, 1,920/case
70.1114.200 96/box, 480/inner case, 1,920/case
Type J 70.111620 µl, neutral
1,000/bag, 10,000/case
70.1116.100 96/box, 1,920/case
70.1116.200 96/box, 480/inner case, 1,920/case
Type A 70.760.002
200 µl, yellow
500/bag, 10,000/case
70.760.102 96/box, 1,920/case
70.760.202 96/box, 480/inner case, 1,920/case
70.760.502 Tip StackPack96/tray, 480/StackPack,
1,920/case70.760.452
70.760.592 Tip StackPack Starter Kit
Type O extra long 70.1189.105*
200 µl, neutral
96/box, 960/case
Type C 70.760.001
250 µl, neutral
500/bag, 10,000/case
70.760.201 96/box, 480/inner case, 1,920/case
70.760.501 Tip StackPack96/tray, 480/StackPack,
1,920/case70.760.451
70.760.591 Tip StackPack Starter Kit
Type L 70.765300 µl, neutral
500/bag, 5,000/case
70.765.100 96/box, 1,920/case
70.765.200 96/box, 480/inner case, 1,920/case
Type B 70.7621,000 µl,
blue
250/bag, 5,000/case
70.762.100 100/box, 1,000/case
70.762.200 100/box, 500/inner case, 1,000/case
Type M 70.11861,250 µl, neutral
384/bag, 3,840/case
70.1186.100 96/box, 3,840/case
70.1186.200 96/box, 768/case
Scale 1:2
70.1183.0015 ml
250/bag, 2,500/case
70.1183.101 50/Box, 500/case
Scale 1:2
70.1183.0025 ml
250/bag, 2,500/case
70.1183.102 50/box, 500/case
Scale 1:2
70.1187.00110 ml
200/bag, 2,000/case
70.1187.101 25/box, 250/case
NEW
NEW
20
Pipettenspitzen für Biomek Pipettierroboter
The quality solution concept for automated liquid handling• Each production batch is tested for functionality and precision on original robotic instruments to ensure a consistently superior product quality
• All tips are certified DNase- and human DNA-free
• Sterile tips are also tested to be non-pyrogenic
• The coloured trays enable easy identification of tips and volumes
Important notes on autoclaving:
Products made from PP can be autoclaved up to 121°C without significantly impairing their mechanical properties. Users are to test for
themselves if autoclaving may have any effect on other characteristic product features so as to influence the individual application concerned.
NEW: Pipette tips for Biomek FX/NX · 3000
Product / Volume Colour code,tray
Tip with filter,sterile
Tip without filter,non-sterile
Tip without filter,sterile Packaging
70.1140.212* 70.1140.102* 70.1140.202**96/rack
*4,800/case**9,600/case
70.1141.212** 70.1141.102* 70.1141.202*96/rack
*4,800/case**9,600/case
70.1142.212* 70.1142.102* 70.1142.202**96/rack
*4,800/case**9,600/case
NEW: Pipette tips for Biomek 1000 · 2000
Product / Volume Colour code,tray
Tip with filter,sterile
Tip without filter,non-sterile
Tip without filter,sterile Packaging
70.1140.211* 70.1140.101** 70.1140.201**96/rack
*4,800/case**9,600/case
70.1141.211 70.1141.101 70.1141.20196/rack
9,600/case
70.1142.211 70.1142.101 70.1142.20196/rack
9,600/case
---- 70.1143.101 70.1143.20172/rack
3,600/case
20 µl
20 µl
35 µl
50 µl
175 µl
250 µl
1,000 µl
20 µl
20 µl
35 µl
50 µl
175 µl
250 µl
Pipette tips for Biomek pipetting platforms
21
Pipette tips for Biomek pipetting platforms Reliable quality – Multiply® reaction tubes for PCR
The original Multiply® tubes are the result of consistently improving the design of the more traditional reaction tubes. Enhanced design features of the Multiply® tubes ensure work is risk-free from contamination and non-tiring compared to traditional tubes.
• Additional benefits of the Multiply® product range:• On request, we also offer conveniently packaged small quantities of products certified to the sterile Biosphere®, or ‘PCR Performance Tested’ quality standard
• Variety of options
• Optimum heat transfer thanks to thin-walled reaction space
• Compatible on thermocyclers with 0.2 and 0.5 ml block formats
• Enables micro centrifugation in most commonly used micro centrifuges (with adapter, as required)
• Integral anti-contamination shield: Preventsaccidentalcontactwiththeinnersurfaceofthelid Easy to open: Anti-contamination shield prevents potential contamination.
• Space-saving lid design: Frosted,flatlidwithlargewritingarea The frosted surface prevents smearing even when processed in a thermocycler. The space-saving lid design allows complete utilization of the heating block capacity.
• Interchangeable RackSystem for 0.2 ml tubes: Samplepreparation/storageintheRackSystempipettingstation Small recess at the skirt of the Multiply® PCR tubes allows tubes to be easily removed from the work tray. The small, roughened recess can also be used as an additional writing area. Description for RackSystem see page 23
22
Ordering Information – Multiply® PCR Tubes
PCR single tubes
Product Order No. Volume Description Sterile Colour Quality Grade
Pieces per bag Packaging
72.735.100
0.5 ml
Biosphere® Multiply®-Pro 0.5
Biosphere® sterile
neutral 100 pieces 500 pcs./inner case1,000 pcs./case
72.735.002Multiply®-Pro 0.5
---- neutral 500 pieces 2,000 pcs./case
72.735.992 ----mixed colours●●●●●●
500 pieces 3,000 pcs./case
72.737
0.2 ml
Biosphere® Multiply®-Pro 0.2
Biosphere® sterile
neutral 250 pieces 1,000 pcs./inner case2,000 pcs./case
72.737.002
Multiply®-Pro 0.2
---- neutral 500 pieces 2,000 pcs./case
72.737.992 ----mixed colours●●●●●●
500 pieces 3,000 pcs./case
Strips of lid for Multiply®-µStrip and Multiply® PCR plate
Product Order No. Description compatible with Sterile Colour Quality
GradeStrips
per bag Packaging
65.989
strips of 8 lids, flat,
highly transparent, for real-time PCR
Multiply®-µStrip
(72.985.002 /
72.985.992)
and
Multiply®
PCR plate
(72.985)
Biosphere® sterile
neutral
12 strips 240 strips/case
65.989.002 ---- 120 strips 480 strips/case
NEW
NEW
Product Order No. Volume Description Sterile Colour Quality Grade
Pieces per bag Packaging
72.990
0.2 ml
Biosphere® Multiply®-µStripPro
Biosphere® sterile neutral 50 strips
200 strips/inner case400 strips/case
72.990.002
Multiply®-µStripPro
---- neutral 120 strips 480 strips/case
72.990.992 ----mixed colours
●●●●120 strips 480 strips/case
72.991.002 ---- neutral 120 strips 480 strips/case
72.991.992 ----mixed colours
●●●●120 strips 480 strips/case
72.991.103Multiply®-µStrip Pro,
low profile---- neutral 120 strips 1,200 strips/case
72.985.002
Multiply®-µStrip ---- neutral 120 strips 480 strips/case
72.985.992 ----mixed colours
●●●●120 strips 480 strips/case
PCR tube strips with and without lid
NEW
23
Ordering Information – Multiply® PCR Tubes Accessories: Interchangeable RackSystem for 0.2 ml Multiply® PCR tubes
• Safe and fast handling of Multiply® tubes• Flexible, two-piece system comprising a work tray and support base• Easily inserted in the thermocycler, no need to remove tubes• Convenient 96 well microtiter format to fit any processing system• Stackable design provides space-saving specimen storage
Suitable for all Multiply® tubes
Ordering Information PCR RackSystem
Illustration Order No. Product Description Description Packaging
95.987.002PCR work tray for
0.2 ml PCR tubesfor 96 tubes 5/bag
95.988
Support base for PCR work tray
neutral
5/case
95.988.001 red ●
95.988.002 blue ●
95.988.003 green ●
95.988.004 yellow ●
Assembly 0.2 ml Multiply® tube loading...
...or, alternatively, Multiply® PCR plate loading.
Ice-bath pipetting Specimen centrifugation in completely assembled RackSystem...
...fast and easy place-ment of specimens into the thermocycler.
Position empty PCR work station to rest securely on the support base.
Align single tubes to 45° for easy handling.
The PCR plate comprises 96 tubes in 12 strips of 8 tubes each.
RackSystem can be used as a pipetting station.
Compatible with any microtiter tray rotor.
After amplification, reposition PCR tray onto stackable support base for space-saving storage.
1 2 3 4 5 6
Sample preparation and PCR applications
Flexible, compact work station for sample preparation and space-saving specimen storage
24
NEW: White PCR plates for quantitative PCR
Cost-effective miniaturisation of qPCR assay in white Multiply® PCR platesFluorescence-based applications like qPCR, particularly those involving small volumes, benefit from the significantly improved reflection characteristics of the white wells. Specimens of low DNA concentration, too, can be more easily detected (see Fig. 1). Compared to transparent wells, a 10-fold fluorescence level can be measured with white wells. Thanks to maximum signal reflection, Ct values are obtained earlier (see Fig. 2). In white plates sealed with qPCR compatible tapes, the reagent volume (SYBR Green) per well can be reduced from 25µl to 15µl without significant changes in sensitivity and stability, enabling a 40% decrease in qPCR reagent costs.
In addition, the white plates minimise adverse effects like “cross talk” that would increase well-to-well variability in transparent wells.
• 10-fold fluorescence level• Improved sensitivity• Enhanced reproducibility
1
AB
CD
EF
GH
23
45
67
89
10 1112
0
5
10
15
20
25
30
35
Ct values for the detection of plasmid copies in white and transparent plates at reduced reaction volumes
Ct v
alue
s
Flu
ore
scen
ce
Number of plasmid copiesFig. 1
Increased sensitivity due to maximum signal reflection
CyclesFig. 2
1,000,000 100,000 10,000 1,000 100
Ct at 15 µl (white)Ct at 25 µl (transparent)
25
NEW: White PCR plates for quantitative PCR
96 Well Multiply® PCR plate with full skirt, “low profile” well design- Enhanced stability for automated systems- Suitable for real-time systems- Black alphanumeric print for enhanced well identification- Raised well rims for optimal sealing with heat-resistant tape- Can be sealed with qPCR film 95.1999 (see p. 33) or optically clear strips of 8 lids (see p. 26)
72.1980.232
0.2 ml 96 Well Multiply® PCR plate, without skirt- NEW: Easy to cut- Black alphanumeric print for enhanced well identification- Raised well rims for optimal sealing with heat-resistant tape- Fits most commonly used thermocyclers- Can be sealed with qPCR film 95.1999 (see p. 33) or optically clear strips of 8 lids (see p. 26)
72.1978.232
1
AB
CD
EF
GH
23
45
67
89
10 1112
96 Well Multiply® PCR plate with half skirt, flat deck- Recommended for Applied Biosystems (ABI) thermocyclers and DNA sequencers- Black alphanumeric print for enhanced well identification- Flat deck enables safe sealing with tapes- Raised well rims for optimal sealing with heat-resistant tape- Can be sealed with qPCR film 95.1999 (see p. 33) or optically clear strips of 8 lids (see p. 26)
72.1979.132
NEW
Multiply® PCR plates made from polypropylene, white• White wells for improved fluorescence reflection• Certified “PCR Performance Tested” • Thin-walled reaction tubes for quick temperature transfer• Fits thermocyclers processing 96 and 384 well block formats• Barcode labeling on plates with half or full skirt is available on request
26
NEW: White PCR plates for quantitative PCR1
AB
CD
EF
GH
23
45
67
89
10 1112
White Multiply® PCR plates and lid strips for 96 Well plates
Product Order No. Special feature Description Quality
Grade Colour Packaging
72.1978.232Optimised for
qPCR96 Well,
without skirtwhite
25 pcs./inner case
100 pcs./case
72.1979.132Optimised for
qPCR96 Well, with half skirt
and low profilewhite
25 pcs./inner case
100 pcs./case
72.1980.232Optimised for
qPCR96 Well, with full skirt,
low profile for Fast PCRwhite
25 pcs./inner case
100 pcs./case
72.1981.232*Optimised for
qPCR
ABI style, 96 Well, with half skirt,
low profile for Fast PCRwhite
25 pcs./inner case
100 pcs./case
72.1982.202Optimised for
qPCRLightcycler 480, 96 Well,
with half skirtwhite
25 pcs./inner case
100 pcs./case
72.1985.202Optimised for
qPCRLightcycler 480, 384 Well,
with full skirtwhite
50 pcs./inner case
100 pcs./case
65.1998.002Optimised for
qPCRstrips of 8 lids, flat for 96 Well
plates, highly transparenttransparent 480 pcs./case
* Available on request
NEW
NEW
NEW
72.1985.202
NEW NEW: Lightcycler 480 PCR plate with 384 wells- Max. volume: 30 µl per well- Black alphanumeric print for enhanced well identification- Raised well rims for optimal sealing with heat-resistant tape- Can be sealed with qPCR film 95.1999 (see p. 33)
72.1982.202
NEW NEW: Lightcycler 480 PCR plate with 96 wells- Black alphanumeric print for enhanced well identification- Raised well rims for optimal sealing with heat-resistant tape- Can be sealed with qPCR film 95.1999 (see p. 33) or optically clear strips of 8 lids (see p. 26)
27
NEW: White PCR plates for quantitative PCR Quality in series – 96 and 384 Well Multiply® PCR plates
Multiply® PCR plates made from polypropylene• Certified 'PCR Performance Tested' • Quick temperature transfer due to thin-walled reaction tubes• Fits thermocyclers processing 96 and 384 well block formats• Raised well rims for improved sealing with heat-resistant tape• Plates with half and full skirt; Barcode available on request
0.2 ml 96 Well Multiply® PCR plate, without skirt- NEW: Easy to cut- Black alphanumeric print for enhanced well identification- Raised well rims for optimal sealing with heat-resistant tape- Fits most commonly used thermocyclers- Can be sealed with optically clear strips of 8 lids (see p. 29)- Can be sealed with qPCR films (see pages 33 – 35)
72.1978.202
96 Well Multiply® PCR plate with half skirt- Recommended for Applied Biosystems (ABI) thermocyclers and DNA sequencers- Black alphanumeric print for enhanced well identification- Suitable for real-time PCR- Can be sealed with optically clear strips of 8 lids (see p. 29)- Can be sealed with qPCR films (see pages 33 – 35)- Also available with barcode label (72.1979.203)
72.1979.202
96 Well Multiply® PCR plate, without skirt, pre-assembled with strips of 8 tubes- Available in the Biosphere® quality, individually wrapped sterile- Suitable for real-time PCR- Can be sealed with optically clear strips of 8 lids (order no. 65.989, see page 29)- Tray from polycarbonate- Suitable for use in RackSystem, see p. 23
72.985
1
AB
CD
EF
GH
23
45
67
89
10 1112
28
Quality in series – 96 and 384 Well Multiply® PCR plates1
AB
CD
EF
GH
23
45
67
89
10 1112
96 Well Multiply® PCR plate with full skirt, 'low profile' well design- Enhanced stability for automated systems - Black alphanumeric print for enhanced well identification- Suitable for real-time PCR- Can be sealed with optically clear strips of 8 lids (see p. 29)- Can be sealed with qPCR films (see pages 33 – 35)
72.1980.202
96 Well Multiply® PCR plate with half skirt, optimised for ABI Fast PCR System- ‘Low profile’ design reduces dead volume and cycle times- Suitable for real-time systems- Black alphanumeric print for enhanced well identification- Can be sealed with optically clear strips of 8 lids (see p. 29)- Can be sealed with qPCR films (see pages 33 – 35)
72.1981.202
384 Well Multiply® PCR plate with robust skirt- 40 µl maximum volume per well - 8 apertures in the frame facilitate positioning and removal of the plate from the heating block- Black alphanumeric print for enhanced well identification- Can be sealed with qPCR films (see pages 33 – 35)
72.1984.202
NEW: 96 Well Multiply® PCR plate with half skirt, with flat deck- Recommended for Applied Biosystems (ABI) thermocyclers and DNA sequencers- Flat deck for easy and safe sealing of wells with tapes- Black alphanumeric print for enhanced well identification- Suitable for real-time PCR- Can be sealed with optically clear strips of 8 lids (see p. 29)- Can be sealed with qPCR films (see pages 33 – 35)
72.1979.102
NEW
29
Quality in series – 96 and 384 Well Multiply® PCR plates Ordering Information – Multiply® PCR plates & lid strips
Lid strips for Multiply®-µStrip and Multiply® PCR plate
Product Order No. Description compatible with Sterile Colour Quality
GradeStrips
per bag Packaging
65.989
strips of 8 lids, flat, highly trans-
parent, for real-time PCR
Multiply®
PCR plate
72.985
Biosphere® sterile
neutral
12 strips 240 strips/case
65.1998.002
strips of 8 lids, flat, highly trans-
parent,for real-time PCR
Multiply®
PCR plates
72.1978.202,
72.1979.102,
72.1979.202,
72.1980.202,
72.1981.202
---- 120 strips 480 strips/case
NEW
1
AB
CD
EF
GH
23
45
67
89
10 1112
Multiply® PCR plates, transparent
Product Order No. Well/Max.Volume Description Sterile Colour Quality
Grade Packaging
72.985 96 / 0.3 ml
Biosphere® Multiply® PCR plate
without skirt,pre-assembled,
raised wells
Biosphere® sterile
neutral1 pcs./bag
20 pcs./case
72.1978.20296 / 0.3 ml
Multiply® PCR platewithout
skirt---- neutral
25 pcs./inner case
100 pcs./case
72.1979.102 96 / 0.3 mlMultiply® PCR plate,
with half skirt and flat deck
---- neutral25 pcs./inner case
100 pcs./case
72.1979.202 96 / 0.3 mlMultiply® PCR plate
with half skirt---- neutral
25 pcs./inner case
100 pcs./case
72.1979.20396 / 0.3 ml
withbarcode label
Multiply® PCR platewith half skirt
---- neutral25 pcs./inner case
100 pcs./case
72.1980.202 96 / 0.2 mlMultiply® PCR plate
with skirt 'low profile'---- neutral
25 pcs./inner case
100 pcs./case
72.1981.202 96 / 0.2 mlMultiply®
Fast PCR plate'low profile'
---- neutral25 pcs./inner case
100 pcs./case
72.1984.202 384 / 40 µlMultiply® PCR plate
with skirt ---- neutral50 pcs./bag
50 pcs./case
30
Multiply® PCR plates - Compatibility Table1
AB
CD
EF
GH
23
45
67
89
10 1112
PCR plate range - Compatibility Table
Model96 Well
without skirt,pre-assembled
96 Well without skirt
96 Wellwith half skirt,
high profile
96 Wellwith full skirt,
low profile
96 Wellwith half skirt,
Fast PCR,low profile
384 Wellwith full skirt
Order No. Standard PCR plates
72.98572.1978.20272.1978.232
72.1979.20272.1979.20372.1979.10272.1979.132
72.1980.20272.1980.232
72.1981.20272.1981.232
72.1984.202
Amersham Bioscience
MegaBace 1000 DNA Analysis System (old Model) ✗ ✗ ✗ ✓ ✗ ✗
MegaBace 1000 DNA Analysis System (old Model) ✗ ✗ ✗ ✓ ✗ ✗
MegaBace 4000 DNA Analysis System ✗ ✗ ✗ ✗ ✗ ✓
MegaBace 5000 DNA Analysis System ✗ ✗ ✗ ✓ ✗ ✓
Applied Biosystems
ABI 2720 ✓ ✓
ABI Prism 7000, 7700 ✓ ✓
ABI Prism 7300, 7500, 7700 real-time PCR-System ✗ ✓
ABI Prism 7900HT real-time PCR-System ✗ ✓ ✓
ABI Prism 7500 Fast real-time PCR-System ✗ ✗ ✓
ABI Prism 7900 Fast real-time PCR-System ✗ ✗ ✓
ABI Prism 7900HT Fast real-time PCR-System ✗ ✗ ✓
ABI Prism 9800 Fast PCR-System ✗ ✗ ✓
Gene Amp 9600 ✓ ✓ ✓
Gene Amp 9700 ✓ ✓ ✓ ✓
Gene Amp 7500/5700 ✓ ✓
PE 2700 ✓ ✓
PE 9600 ✓ ✓ ✓
PE 9700 ✓ ✓ ✓
StepOnePlus Fast real-time PCR-System ✗ ✗ ✓
Seq. ABI Prism 310 Genetic Analyzer ✓ ✓ ✗ ✓*Seq. ABI Prism 3100/3130 Genetic Analyzer ✓ ✓ ✗ ✓*Seq. ABI 3700/3730/3730 XL DNA Analyzers ✓ ✓ ✗ ✓* ✓
Veriti 96 Well / 384 Well ✓ ✓
Veriti Fast 96 Well ✗ ✗ ✗ ✓ ✗
Biometra
T1 ✓ ✓ ✓ ✓
T3 ✓ ✓
T Gradient ✓ ✓ ✓ ✓
TRobot ✓ ✓ ✓
Uno ✓ ✓ ✓
Uno II
NEW
NEW
NEW
NEW
* with compatible adapter from ABI
31
Multiply® PCR plates - Compatibility Table 1
AB
CD
EF
GH
23
45
67
89
10 1112
Model
96 Well without
skirt,pre-
assembled
96 Well without
skirt
96 Wellwith half
skirt,high profile
96 Wellwith full skirt,
low profile
96 Wellwith half
skirt,Fast PCR,low profile
Lightcycler480,
96 Well, full skirt
384 Wellwith full
skirt
Lightcycler480,
384 Well,full skirt
Order No. Standard PCR plates
72.98572.1978.20272.1978.232
72.1979.20272.1979.20372.1979.10272.1979.132
72.1980.20272.1980.232
72.1981.20272.1981.232
72.1982.202 72.1984.202 72.1985.202
Bio-Rad/MJ Research
CFX 96, real-time ✓iCycler, real-time ✓ ✓ ✗iQ5, real-time ✓ ✓ ✗MyCycler ✓ ✓ ✗Opticon 2 System, real-time / C1000 Serie / S1000 Serie ✗ ✓ ✓PTC-200 ✓ ✓ ✓ ✓ ✓PTC-225/220/221 ✓ ✓ ✓ ✓ ✓PTC-100 ✓ ✓ ✓ ✓
Corbet Research
Palm Cycler ✓
Eppendorf
Mastercycler ep realplex ✓ ✓Mastercycler Gradient ✓ ✓ ✓ ✓Mastercycler pro ✓ ✓ ✓ ✓
Ericom
Deltacycler ✓ ✓ ✗ ✗SingleBlock ✓ ✓ ✗ ✗TwinBlock ✓ ✓ ✗ ✗
MWGA
Primus 96 ✓ ✓ ✓Primus 384 ✓THEQ
The Q-Lifecycler ✓ ✓ ✓
Roche
Lightcycler 480 ✓ ✓
Stratagene
Gradient Temp. Cycler ✓MX3000/4000 Multiplex, QPCR System ✓ ✓Robocycler 96/384 ✓
TechneFlexigene ✓ ✓ ✓Genius ✓ ✓ ✓OMN-E ✓ ✓ ✓ ✓PCR Express ✓ ✓ ✓ ✓ ✓Primus 96 ✓ ✗ ✓Px2/PxE ✓ ✓ ✓ ✓ ✓Quantica, real-time ✓TC412/TC512 ✓ ✓Touchgene Gradient ✓ ✓ ✓ ✓
PCR plate range - Compatibility Table
NEW
Legend: ✓✗
= recommended= not recommended= not checked
32
96 Deep well MegaBlock® 1.2 / 2.2 ml
MegaBlock® 96 WellThe MegaBlock® 96 Well is ideal for automated processing of sample volumes from 1.2 to 2.2 ml or handling large quantities of backup samples.
• Sealing foils/mats available• Products are manufactured under clean room conditions and protected against contamination• Free from human DNA, DNase/RNase, endotoxins
MegaBlock®
Order No. Description Volume/Material Packaging
82.1970.002 round, raised wells 1.2 ml PS transparent 32 pcs./case
82.1971.002 round, raised wells 1.2 ml PP 32 pcs./case
82.1972.002 square wells 2.2 ml PP 32 pcs./case
MegaBlock® 1.2/2.2 ml, PP
• Each well 100% leak-proof tested • Ideal for backup storage of pharmaceutical substances, DNA isolation, long-term sample storage, and enzyme and tissue culture applications• Solvent-resistant to DMSO• Square cavities(2.2 ml) with round bottom wells with alphanumeric coordination system• Autoclavable*
MegaBlock® 1.2 ml, PS transparent
• Each well 100% leak-proof tested• Ideal for long-term storage of blood samples• Pierceable mat cover• Transparent for viewing• Round bottom wells with alphanumeric coordination system
Lids and tapes for MegaBlock®
Order No. Description Packaging
95.1990.002Cover for 1.2 ml MegaBlock®, pierceable,
suitable for 82.1970.002 and 82.1971.002250 pcs./case;
50 pcs./ inner case; 10 pcs./bag
95.1991.002 Cover for 2.2 ml MegaBlock®, suitable for 82.1972.002250 pcs./case;
50 pcs./ inner case; 10 pcs./bag
95.1995 Aluminium foil, pierceable 100 foils/ inner case
82.1586 Acetate film, transparent 100 foils/ inner case
95.1992 Adhesive tape, 96-fold perforation, pierceable 100 foils/ inner case
95.1993 Strongly adhesive tape, transparent 100 foils/ inner case
Refer to pp. 34 – 35 for a detailed description of 95.1995, 95.1992, 95.1993* Important notes on autoclaving on p. 20
NEW
NEW
33
96 Deep well MegaBlock® 1.2 / 2.2 ml Adhesive sealing tapes for qPCR/PCR, automation and sample storage
Ordering Information
Order No. Description Packaging
95.1999 Highly transparent, suited for qPCR with pressure sensitive adhesive 100 tapes/inner case
Adhesive sealing tapes for qPCRHermetical sealing of micro test plates made from polypropylene, polystyrene and polycarbonate to exclude evaporation and protect samples during applications, storage and transport requires tailor-made tape materials.
The Sarstedt range includes a variety of sealing tapes specially designed to meet the sophisticated requirements of PCR, storage of active substances, and High Throughput Screening. All tapes are produced under clean room conditions to exclude contamination with DNase/RNase and nucleic acids.
Highly transparent adhesive tape for quantitative PCR
The 50 µm polyolefin film is coated with a smear-free, crystal clear adhesive that shows minimal adhesion at room temperature and is, therefore, exceptionally easy to handle. Thanks to the initially low stickiness, the film on the PCR plate can be easily shifted to the correct position, if necessary. The strong adhesive effect is brought about during PCR and as a result of the heat produced by the cover, minimising loss by evaporation.
• Highly transparent film ideally suited for real-time PCR and other fluorescence-based applications
• Excellent sealing properties with minimised evaporation values due to innovative adhesive
• No distortion under thermal strain / prevents cross contamination
• Does not stick to skin or gloves during application
• Compatible with aqueous solutions and organic solvents like DMSO, acetonitrile and methanol
• Functional sealing range: -70°C to 110°C
NEW
34
Adhesive sealing tapes for qPCR/PCR, automation and sample storage
Ordering Information
Order No. Description Packaging
95.1994 transparent 100 tapes/inner case
Transparent adhesive tape for end point PCR and qPCR
The optically transparent foil is made from a 50 µm polyolefin film with perforated “end tabs” for easy removal.
• Optically transparent foil for standard and real-time PCR
• Removable without leaving any residue and ideally suited for sample storage to -70°C
• Compatible with aqueous solutions and organic solvents like DMSO, acetonitrile and methanol
• Functional sealing temperature range for PCR: up to 110°C
Ordering Information
Order No. Description Packaging
95.1995 aluminium 100 tapes/inner case
Aluminium foil for PCR and sample storage
The heat-resistant, robust, pierceable 38 µm aluminium foil stands out for efficient anti-evaporation protection and resistance to solvents. Perforated “end tabs” can be easily removed after attaching the foil.
• Tape can be pierced with probes and pipette tips
• Removable without leaving any residue
• Ideally suited for storing sample material/compounds to -70°C
• Compatible with aqueous solutions and organic solvents like DMSO, acetonitrile and methanol
• Functional sealing temperature range for PCR: up to 110°C
Ordering Information
Order No. Description Packaing
95.1993 transparent 100 tapes/inner case
Transparent adhesive tape for end point PCR and sample storage, strongly adhesive
The tape is made from a 50 µm polyester film coated with a special adhesive for immediate adhesive effect.
• Efficient anti-evaporation protection due to strongly adhesive effect
• Easily removable due to firm “end tabs”
• Compatible with aqueous solutions and organic solvents
• Functional sealing temperature range: -40° to 110°C
NEW
35
Adhesive sealing tapes for qPCR/PCR, automation and sample storage
Ordering Information
Order No. Description Packaging
95.1992 96 fold perforated, transparent 100 tapes/inner case
Pierceable adhesive tape for DNA sequencers, HPLC and autosamplers
The 50 µm polyester film coated with a strong adhesive has 96 perforated openingsfor easy piercing. The perforated openings are free from adhesive to prevent samples, needles or pipette tips from sticking to the tape.
• Easy sampling with tips or pipetting systems
• Temporary protection against evaporation and ideal for samples in 96 well plates
• Resealable for long-term protection with a second tape (e.g. 95.1993)
• Compatible with aqueous solutions and organic solvents
• Cost-effective tape for use in DNA sequencers, HPLC and autosamplers
• Functional sealing temperature range -40°C to 110°C
NEW
Recommended tape options
Order No. Product description Application Special features Pierceable Material Functional
temperature range
95.199296-fold perforated cover tape
Processing/DNA-sequencer, HPLC, autosampling
Easy to pierce, 96 perforated opening w/o adhesive
yes Polyester -40°C to 110°C
95.1993Transparent PCR tape, strongly adhesive
PCR, sample storageStrongly adhesive, eliminates edges, fringing
no Polyester -40°C to 110°C
95.1994Transparent PCRand qPCR tape
PCR, real-time PCRGood optical transparency, high chemical resistance
no Polyolefin -70°C to 110°C
95.1995Adhesive aluminium foil
Sample storagePierceable light protection for samples, high chemical resistance
yes Aluminium -70°C to 110°C
95.1999Adhesive, optically highly transparentqPCR tape
real-time PCR,fluorescence analyses
Highly transparent, pressure-sensitive adhesive, minimal evaporation rates
no Polyolefin -70°C to 110°C
NEW
NEW
NEW
36
SafeSeal micro tubes with push cap
0.5 / 1.5 and 2.0 ml Micro Tubes with sterile Biosphere® purity are routinely used when RNase-, DNA-, ATP-free and non-pyrogenic conditions are essential. Superior to standard reaction tubes, Biosphere® Micro Tubes have been developed and continually enhanced to suit the requirements in medical and molecular-biological research:
Secure SafeSeal cap lockingThe 0.5 / 1.5 and 2.0 ml SafeSeal Micro Tube features a closing mechanism which prevents unintentional popping open under thermal stress.
• Wide hinge for easy and precise closure
• Large writing space on lid
• Centrifugation up to 30,000 x g (2.0 ml Micro Tubes up to 25,000 x g)
37
SafeSeal micro tubes with push cap
NEW
Fig.:SafeSeal Micro Tubeindividually wrapped
Minimizing the risk of contaminationTo reduce storage time in open bags and inherent contamination risks, Biosphere® SafeSeal Micro Tubes are packaged 50 pieces per bag. For most stringent demands in sample preparation, individually wrapped SafeSeal tubes in Biosphere® quality are available. Optionally available non-sterile 0.5 / 1.5 and 2.0 ml SafeSeal Micro Tubes in ‘PCR Performance Tested’ quality: DNase-, RNase-, human DNA- and PCR inhibitor-free.
Volume 0.5 ml 1.5 ml 2.0 ml
Description Order No. Packaging Order No. Packaging Order No. Packaging
72.704.400 250/bag
500/inner case 2,000/case
72.706.400 250/bag
1,000/inner case 2,000/case
72.695.400 250/bag
1,000/inner case 2,000/case
sterile · non-pyrogenic · DNA-freeRNase-free · ATP-free
72.704.200 50/bag
250/inner case 500/case
72.706.200 50/bag
250/inner case 500/case
72.695.200 50/bag
250/inner case 500/case
72.704.201individually wrapped 50/inner case
100/case72.706.201
individually wrapped 60/inner case
120/case72.695.201
individually wrapped 60/inner case
120/case
Ordering Information – Micro Tubes with SafeSeal push cap
38
UV-Transparent Disposable Cuvettes for photometric analyses in the UV range ≥ 220 nm
The plastic material of the half micro cuvette enables measurements in the UV range from wave lengths of 220 nm. Contamination caused by the repeated rinsing processes required for quartz glass cuvettes can be avoided by using the UV-transparent disposable cuvette. Apart from non-certified UV cuvettes, our range includes a certified option individually sealed with a cap and packed in a Styrofoam container to protect from scratches.
Typical applications and product features • Photometric analysis of nucleic acids at 260 nm and proteins at 280 nm
• Low UV absorbance for DNA, RNA and protein quantification
• Compatible with photometers of 8.5 mm and 15 mm light centre height: Eppendorf Biophotometer, ThermoSpectronic, Perkin Elmer, Bio-Rad, Analytica Jena etc.
• Minimizes absorbance deviations due to consistently accurate optical quality
• Economical low-cost alternative to quartz cuvettes
• Certified UV cuvettes (DNA-/RNase-/Protein-free) individually sealed with caps optionally available for safe sample storage and prevention of contamination
For measurements in the short-wave UV range below 300 nm, the material-related self-absorptive characteristics of PS and acrylic (PMMA) cuvettes increase distinctively as their transmission ration decreases.
nm
Wavelengthin nm
Transmission in %
UV cuvette Acrylic cuvette
Polystyrenecuvette
260 73 23 0
280 86 68 0
313 94 93 66
334 96 97 79
366 97 98 90
405 98 99 95
560 98 99 96
UV cuvette
Acrylic cuvette
Polystyrene cuvette
Transmission values in individual cuvettes
39
UV-Transparent Disposable Cuvettes for photometric analyses in the UV range ≥ 220 nm
Technical specificationMin. sample volume: 50 µl
Optical path length: 10 mm
Basic absorbance: ≤ 0.134 A at 260 nm; ≤ 0.065 A at 280 nm
External dimensions (W x D x H): 12.5 x 12.5 x 45 mm
Light centre height (LCH): 8.5 mm and 15 mm
Ordering Information UV Cuvettes
Order No. Length LCH Packaging
67.758 45 8.5 mm 100 pcs. in Styrofoam box; 400 pcs./case
67.758.001 45 8.5 mm100 pcs. ind. sealed with lid, in Styrofoam box; 400 pcs./case
certified DNA-/RNase-/Protein-free
67.759 45 15 mm 100 pcs. in Styrofoam box; 400 pcs./case
67.759.001 45 15 mm100 pcs. ind. sealed with lid, in Styrofoam box; 400 pcs./case
certified DNA-/RNase-/Protein-free
SARSTEDT AG & Co.P.O. Box 12 20D-51582 NümbrechtPhone +49 2293 3050Fax +49 2293 305- [email protected]
2g-2
00-0
211-
0911
Th
is d
ocum
ent
may
con
tain
info
rmat
ion
on p
rodu
cts
that
may
not
be
avai
labl
e in
par
ticul
ar c
ount
ries
Tech
nica
l mod
ifica
tions
res
erve
d
Please call if you requiremore information!