1
ONLINE AUCTION
WOODWORKING MACHINERY
ONLINE AUCTION EVENT VIA THE HIGH STREET AUCTION APP
21 JANUARY 2021 @ 08:00 – 17:00
CALL NIKOLAI – 082 764 3381 TO MAKE AN APPOINTMENT TO VIEW
VIEWING DATES: 18th – 20th January from 10AM until 2PM
Andre 082 687 3988 /
Tel: 011 684 2707 or
The rules of auction are available at http://www.highstreetauctions.com/auction-info-high-street-auctions.php#rules and at our offices. The
auction is conducted in terms of the Regulations relating to auctions contained in The Consumer Protection Act 68 of 2008 and notice is
given that all sales are subject to a minimum reserve unless otherwise stated.
THE HIGH STREET AUCTION COMPANY (PTY) LTD Registration No: 2010/019027/07
3
IMPORTANT AUCTION INFORMATION:
In order to register to bid, please ensure that you send through the following:
Registration deposit of R5 000 payable by EFT
Copy of ID Book
Proof of Residence
Letter of authority to sign on behalf of a juristic entity
All sales are subject to VAT & a 10% Buyer’s Commission + VAT.
No items will be released until balance of purchase price reflects in Auctioneers Trust account.
All assets to be removed within FOURTEEN Days from auction, or by alternative arrangement.
In the event that a cash deposit is made, the Depositor will be liable for the bank charges relating to that transaction. Invoices to be paid within 24 hours after auction closes or registration fee is forfeited.
SEVEN Days for removal of Assets.
Any lot can be withdrawn at any time.
Lots are subject to confirmation.
All items sold voetstoots.
DISCLAIMER: Whilst reasonable precautions have been taken in compiling the information contained in this
document, neither the seller nor the Auctioneer shall be liable for any loss, damage or expense whatsoever
or howsoever caused, arising from reliance on any information provided, nor do they guarantee the
completeness or accuracy thereof, the duty at all times resting on the Purchaser to conduct its own due
diligence inspections relating to the property/ies referred to herein in order to verify the information reflected,
and the purchaser’s participation in any auction or private treaty sale based upon such information shall be
entirely at its own risk and in acceptance of the aforegoing
4
LOT DESCRIPTION
001
One 'Martlet' Abrasive CUT-OFF SAW
0.3m dia. Blade approx. with Steel Table
002
One 'CMC' motorized STEEL BAR TWISTER
8-10mm Square Bar Capacity
With Pneumatic Clamp
003
One 'Radyne' 160 Amp Inverter MIG WELDER
Type TST 160-I
004
One 'Standard' Turret MILLING MACHINE
1.07m x 0,23m Table
With 2HP Drive, Power Traverse and
'Newall Sapphire' 2-Axis Digital Read-Out
005
One Steel Fabricated CLAMPING TABLE
1.2m x 2.5m Overall
With 5 Pneumatic Clamps
006
One Single Bag, Portable DUST FILTER
007
One 'Socomec' PANEL SAW
Type TMX 320
Serial No. SOC 530/10 of 2010
5.5HP
008
One Fabricated, Manually Operated STEEL BAR TWISTER
8-10mm Square Bar Capacity
009
One Timber Fabricated CLAMPING TABLE
0.6m x 1.5m Overall
With 4 Toggle Clamps
010
One 'Morso' Manually Operated MITRE CUTTER
150mm Cut
Serial No. B 12095
CATALOGUE
5
011
One 'Steelcraft' Flat Bed TRAILER
Twin Axle, 750kg Capacity
With Mesh Sides and Spare Wheel
2.2m x 3.3m approx.
Serial No. AE9B175JBDPBM1065
012
One 'SCM L'invincible' SPINDLE MOULDER
Type 120C
Serial No. JWD 63533
0.97m x 1.05m Table
With 'Martlet' 3 Roll Feeder
013
One Twin Bag DUST FILTER
014
One 'Metalclad' Vertical BANDSAW
0.725m Throat x 0.3m Capacity
With Tilting Table
015
One 'Festo' LOUVRE SLOT CUTTER
8mm dia Spindle approx.
2HP Drive approx.
016
One 'Rockwell' TABLE SAW
Type RT-40
Serial No. 560 of 2.80
0.32m dia. approx. Blade
017
One 'Unknown' WIDE BELT SANDER
1.35m Working Width
With 30HP approx. Drive
018
One 'Coral' 4-Bag DUST FILTER
019
One 'Griggio' THICKNESSER
Type PS 630
0.63m Working Width
020
One 'SCM L'invincible' COMBINATION SPINDLE MOULDER/SAW
Type ST3
1.36m x 1.05m Table
021
One 'Wadkin' SPINDLE MOULDER
Serial No. EQ 940
Test No. 55637
0.915m x 0.81m Table
6
022
One 'Holytek' SINGLE END TENONER
Model ST-120A
Serial No. 1547 of 99.07.01
with 2 & 3 HP Head Drives
023
One 'Unknown' Pneumatic UPSTROKE SAW
0.635 x 0.67m Table
With Roller Infeed Conveyor
024
One 'Robinson' Chain and Chisel MORTICER
Type BH
Serial No. SW 15007
0.2m Throat
025
One Steel Fabricated, Portable CLAMPING FRAME
1.3m x 2.4m approx. Double Sided
With 12 Clamps
026
Five Steel Fabricated TROLLEYS
027
One Steel Fabricated, OIL DIP TANK
With Mesh Cover
1.3m x 2.3m
028
The Miscellaneous Office Furniture, Fixtures and Fittings
029
One 'Titan' 3-Cylinder Reciprocating AIR COMPRESSOR
Vee-belt Drive 15kW A.C. Motor
2000 Litre/Min
Mounted on 500Litre Horizontal Air Receiver
030
One Elevated Dust Extraction CYCLONE
1.2m dia, x 3m High approx.
With Centrifugal EXTRACTION FAN
0.6m dia. x 0.47m wide approx. Casing
Vee-belt Drive 55-75kW A.C. Motor
NO DUCTING
031
One Steel Fabricated WASTE BALING PRESS
Twin Compartment
Hydraulically Operated with 4kW approx. Power Pack
0.7m x 0.7m x 1.2m Deep Press Compartment
032
One 'Sedgwick' MORTICER
0.14m Throat
033
One 'Unknown' MORTICER
0.14m Throat
7
034
One 'Danckaert' SINGLE END TENONER
Serial No. E718-S37494
With 3 x 1.5kW Head Drives
035
One Steel Fabricated CLAMPING TABLE
3m x 3.5m Overall
With 7 Pneumatic Clamps
036
One 'Samco' STROKE SANDER
Serial No. AR-12
0.15m x 3m Working Width
037
One 'YFC' Pneumatic UPSTROKE SAW
Model YFC-18
Serial No. 991015 of 1999
7.5HP
0.65 x 0.69m Table
With Roller Infeed and Outfeed Conveyors
038
One 'Robinson' Pull-Over RADIAL ARM SAW
Serial No. SA1900?
0.5m Travel Over
0.46m dia. approx. Blade
With 4.5m Table
039
One 'Robinson' PLANER
Type WE/T
Machine No. 367
Size 16"
Test No. 63/237
0.4m wide x 1.9m Table
040
One 'Weinig' 5 Head MOULDER
Type Profimat 23
Machine No. 123-1107 of 1995
0.26m Working Width NO DUCTING
041
One Fabricated TOOL JIG/SETTER
042
The Miscellaneous Assorted TOOLS and CUTTERS
043
One 'OMGA' NOTCHING MACHINE
Model Ti 88
Serial No. 2012078 of 19-04-12
1.9m Table
044
One 'Formahero"? Vertical Belt EDGE SANDER
Model FH-700
0.15m Wide Belt x 1.5m Long
8
045
One 'Elumatic' CUT-OFF SAW
Type MGS 72/30
Serial No. 0723041450 of 11/2012
3kW
With Roller Infeed Conveyor
046
One 'Delta' Pillar DRILLING MACHINE
Serial No. 71-1779
0.22m Throat
Vee-Belt Drive
16mm Capacity
047
One 'Masterwood' LOUVRE CUTTER
Type EPM.90
Serial No. 96070101
1.85kW
048
One 'Unknown' Pull-Over CUT-OFF SAW
240mm dia. approx. Blade
049
One 'Weinig' TOOL SHARPENER
Type Rondamat 168
Serial No. 9010854 of 2006?
0.15m dia, approx., Grinding Wheel
0.2m x 0.8m Table
050
One 'Unknown' Pull-Over RADIAL ARM SAW
0.68m Travel Over
With 0.2m dia, Cutter Fitted
0.75m Wide x 4.5m Long Table
051
One 'Unknown' 5-Daylight HEATED PRESS
1.3m x 2.9m x 0.08m Daylight Platens
Oil Heated
052
One 'ABAC' Garage Type AIR COMPRESSOR
2HP
053
One 'Eurasia' OIL COOLED WELDER
220 Amp
054
One Manual PALLET TRUCK
055
Approx 45 Wood Frames (10 Hole Frame)
056
Approx 30 Wood Frames (8 Hole Frame)
9
057
Approx 270 Wood Frames Various Sizes(8 Hole Frame)
060
One 2012 'VW' GOLF
Model Golf 6, 1.4TSI Comfortline Automatic
Registration No. NU 22568
219907 Kms
(Note: Advised Catalytic Converter Removed. Slight Damage to Front Left Bumper and Wheel
Arch. Rust Signs Over Windscreen)
Please note this vehicle is kept on a different site: Please contact Nikolai – 082 764 3381
To arrange viewing