Dimensions:
Length: 3180mm
Width: 1080mm
Inlet Height: 2060mm
Total Height: 2060mm
Weight (approx.) 200kg
Tank is supplied standard with:
1 x 300mm inlet strainer
1 x 90mm overflow cap
1 x 90mm overflow
1 x 25mm brass gate valve
1 x 25mm flush spinweld
1 x 25mm hex nipple
• When no fit out is nominated standard fit out will be supplied
• Bucket tap not included with tank
Nylex Water Tank 5000 Litre SLR Slimline
Code: NT5000XXSLIMSLR (Zone 1 & Zone 2) 5000 Litre SLR Slimline – 11 00 gallons
Standard fit out details:
Inlet: Inlet: @ 9 o’clock (left side) – 300mm inlet strainer
Overflow: @ 3 o’clock – 90mm overflow cap (moulded into tank)
Outlet: @ 9 o’clock - 25mm flush spinweld, hex nipple, 25mm brass gate valve
Other fit out options:
Inlet: @ 3 o’clock (right hand side) but in addition with the inlet @ 9 o’clock (extra charge)
Overflow: @ 9 o’clock (moulded into tank)
Outlet: @ 3 o’clock - 25mm flush spinweld, hex nipple, 25mm brass gate valve
• Customer to request fit out on either left or right side of tank if not standard fit out
• Made in any standard COLORBOND® roofing colours
*Dimensions of our tanks can vary slightly due to shrinkage variations. All dimensions are approximate
nylextanks.com.au
Quality ISO 9001
QEC24048
AS/NZS 4766:2006 SMKP25513SAI GLOBAL
AS 1838 - 1994 Lic SMK40334SAI Global
Quality ISO 9001
QEC24048
Nylex Tanks I ABN 84 661 692 793 34 Gap Road (P.O. Box 2475) Sunbury Victoria 3429
T 1300 664 148
F 1300 400 049
Nylex Tanks is managed and certified to the ISO9001:2008 international Quality Management Systems standard and our tanks are manufactured and certified to Australian Polyethylene tank standard AS/NZS4766:2006.
All Nylex tanks are manufactured in Australia using UV stabilised Polyethylene complying with AS/NZS 4020 and AS/NZS 2070.
Nylex /Call Centre docs/05.12.14
Inlet @ 9 0’clock
Left side of tank @ 9 o’clock
Hand Holders for moving tank
Front of tank
Nylex Water Tank: 5000 Litre SLR Slimline Code: NT5000XXSLIMSLR (Zone 1 & Zone 2)
Dimensions: Length: 3180mm Width: 1080mm Inlet Height: 2060mm Total Height: 2060mm Weight (approx.) 200kg *Dimensions of our tanks can vary slightly due to shrinkage variations*
Tank is supplied standard with 1 x 300mm inlet strainer 1 x 90mm overflow cap 1 x 90mm overflow 1 x 25mm flush spinweld 1 x 25mm hex nipple 1 x 25mm brass gate valve 1 x 25mm flush spinweld 1 x 25mm plug
Standard fit out details: Inlet: @ 9 o’clock (left side) – 300mm inlet strainer Overflow: @ 3 o’clock – 90mm overflow cap (moulded into tank) Outlet: @ 3 o’clock – 25mm flush spinweld 400mm up from base with 25mm plug (tap no included) Outlet: @ 9 o’clock – 25mm flush spinweld, hex nipple with 25mm brass gate valve
• When no fit out is nominated standard fit out will be supplied
Other fit out options: Inlet: @ 3 o’clock (right hand side) but in addition with the inlet @ 9 o’clock (extra charge) Overflow: @ 9 o’clock (moulded into tank) Outlet: @ 9 o’clock - 25mm flush spinweld 400mm up from base with 25mm plug (tap not included) Outlet: @ 3 o’clock - 25mm flush spinweld, hex nipple, 25mm brass gate valve ** Customer to request fit out on either left or right side of tank if not standard fit out **
Made in any colorbond colours. Our company is managed using and certified to the ISO9001:2008 international Quality Management Systems standard and our tanks are manufactured and certified to Australian Polyethylene tank standard AS4766. Nylex tanks are Australian made, manufactured using high-quality UVstablised food-grade polyethylene certified to: AS4020 & AS2070 potable water and food contact standards and have a 10 year warranty.
Right side overflow @ 3 o’clock
9
6
12
3