1 Nisshin Steel Quality Products1 Nisshin Steel Quality Products
Foreword 2
Features 3
Production Process 4
Characteristics and Applications 5
Types of Stainless Steel Available 11
Available Sizes (SUS 304 and SUS 430) 13
Finish 15
Surface-Treated Stainless Steel 16
Dimensional Tolerances 17
Applications 20
Types of Protective Coatings 25
Packaging 25
Coil Unit Weight Diagram 26
Information Needed to Meet Orders 26
Contents
2Nisshin Steel Quality Products
Shunan Works
Nisshin Steel Co.,Ltd is an integrated steel manufacturer in Japan. Our products range
from ordinary steel to special steel, surface-treated products, stainless steel and welded
pipes and tubes. In 1958, we became the first Japanese producer of cold-rolled stainless
steel sheets in coil at Shunan Works and since then we have helped to make stainless
steel a material commonly used in the manufacturing of consumer durables both in Japan
and overseas.
Nisshin Steel has received wide acclaim as a supplier of cold-rolled sheets and strips and
hot bands of excellent quality. To meet the diversifying needs of our customers, we have
developed special types and grades of steel, including surface-treated products.
We are working to satisfy our customer's needs by providing a line of better products and
the quality of which is achieved through our use of advanced production facilities.
The following is an introduction to our stainless steel products, their applications and
other relevant information.
Foreword
3 Nisshin Steel Quality Products
Features
1
Nisshin products are manufactured by an integrated quality control process from melting to finishing.
Uniform Quality
2
The state-of-the-art production facilities offer high sheet thickness precision and flatness.
High Dimensional Precision and Flatness
3
Nisshin produces a wide variety of unique NSS type steel in addition to the JIS standard steels to meet anyneeds of customers.Nisshin products are given various types of surface finish.
Wide Variety of Types of Steel and Finish
4
Nisshin products widely ranges in thickness, length and width.
Wide Range of Sizes
5
Nisshin can give technical services suitable for user's needs,making full use of our rich experience in the field of steel production.
Perfect After-Sales Service System
Converter Tandem Sendzimir cold rolling millHot strip mill (Kure Works)Continuous casting machine
4Nisshin Steel Quality Products
Production Process
Cr-ore, coke, Scrap, and ferro-alloy
Hot strip mill
Cold-rolled strip (sheets)
Cold-rolled strip (coils)
Cold-rolled strip (coils)
Continuous annealing and pickling line
Continuous bright annealing line
Continuous annealing and pickling line
Coil grinding line
Ferritic type, martensitic type
Ferritic (single-phase), Austenitic type
Tandem Sendzimir mill
Sendzimir mill
Cluster mill
Bell type annealing furnace
Electric arc furnace L.D.converter Vacuum degassing vessel Continuous casting machine
Slab grinder Slab heating furnace
Skinpass mill
BA finish No.2B finish
No.2D finish
Continuous shearing line
Coils
Slitting line
Tension leveling line
Finish polisher
Polished finish
Cold rolling process
Final process
Hot rolling process
Steel making process
High crown controlled hot strip millTandem Sendzimir cold rolling millCold rolling by automatic gage controllerTension levelling line for strips and sheetsElectronic automatic surface inspector
Strong points of manufacturing facility
6Nisshin Steel Quality Products5 Nisshin Steel Quality Products
Characteristics and Applications
1. Characteristics and Applications
Characteristics and Applications
Classification
Chemical Composition Physical properties Mechanical properties
NisshinNSS
C Ni Cr Mo OthersSpecificgravityg/cm3
Modulus ofelasticity103N/mm2
Averagemodulus ofthermalexpansion
10-6cm/cm/20100
ThermalconductivityW/m100
Tensile test Hardness test
YieldstrengthN/mm2
TensilestrengthN/mm2
Elongation
HB HRB HV
Austenitic type
0.03 6.00 8.00 16.0018.00 N0.20 7.93 194 16.9 16.3 210 530 40 95 2180.15 6.00 8.00 16.0018.00 7.93 194 16.9 16.3 205 520 40 187 95 2180.08 8.0010.50 18.0020.00 7.93 194 17.3 16.3 205 520 40 187 90 200
304S 0.08 8.0010.50 18.0020.00 7.93 194 17.3 16.3 205 520 40 187 90 200304ES 0.03 7.00 9.00 16.0018.00 Cu2.803.80 7.93 199 17.2 15.1 155 450 40 162 90 170
0.08 8.5010.50 17.0019.00 Cu3.004.00 7.93 194 17.3 16.7 155 450 40 187 90 200XM7 0.05 8.5010.00 18.0020.00 Cu2.504.00 7.93 194 17.3 16.7 205 510 40 90 200304M2 0.03 6.50 8.50 15.5017.50 Cu1.502.50 7.93 187 17.3 16.3 335 660 50 86 175304M3 0.06 6.40 8.00 15.0017.00 Cu1.502.50 7.93 187 17.3 16.3 180 500 40 187 90 200
0.03 9.0013.00 18.0020.00 7.93 194 17.3 16.3 175 480 40 187 90 2000.08 7.0010.50 18.0020.00 N0.100.25 7.93 194 16.9 16.3 275 550 35 95 2200.12 10.5013.00 17.0019.00 7.93 197 17.3 16.3 175 480 40 90 200
305M1 0.08 11.0013.00 15.0017.00 Mn2.004.00 7.93 194 17.3 16.3 175 480 40 90 200302B 0.15 8.0010.00 17.0019.00 Si2.003.00 7.93 194 16.2 15.8 205 520 40 95 220ER-1 0.07 12.0013.50 18.5020.00 Nb0.050.20 Si3.004.00 7.75 182 15.5 14.6 255 520 45 95 220ER-4 0.07 12.0013.50 16.0018.00 2.003.00 Si2.003.00 7.85 182 14.5 205 520 40 95 220
0.08 19.0022.00 24.0026.00 7.98 205 14.4 14.1 205 520 40 187 90 2000.08 10.0014.00 16.0018.00 2.003.00 7.98 194 16.0 16.0 205 520 40 187 90 2000.03 12.0015.00 16.0018.00 2.003.00 7.98 193 16.0 16.0 175 480 40 187 90 200
SCR 0.07 11.5013.50 18.0019.50 0.501.50 Cu1.502.50 Si2.504.00 7.75 194 16.7 16.0 255 520 45 95 220AM-3 0.08 8.5010.00 18.0020.00 Cu3.604.50 7.93 193 16.5 205 510 35 200
Type
JISSUS
301304
XM7
304L304N1305
302BXM15J1
310S316316L
315J2
301L
8Nisshin Steel Quality Products
Characteristics and Applications
7 Nisshin Steel Quality Products
Characteristics and Applications
2. Characteristics and Applications
Classification
Chemical Composition Physical properties Mechanical properties
NisshinNSS
C Ni Cr Mo OthersSpecificgravityg/cm3
Modulus ofelasticity103N/mm2
Averagemodulus ofthermalexpansion
10-6cm/cm/20100
ThermalconductivityW/m100
Tensile test Hardness test
YieldstrengthN/mm2
TensilestrengthN/mm2
Elongation
HB HRB HV
Ferritic type
0.08 10.5011.75 Ti6C0.75 7.75 194 10.8 23.8 175 300 22 167 86 175
445M2 0.02 0.60 21.0023.00 1.001.50 N0.020 Ti0.050.50 Nb0.100.60 7.75 199 10.0 22.5 205 450 22 95 220410M1 0.03 0.60 11.5013.50 7.75 202 9.9 23.8 195 360 25 85 170HR-1 0.03 0.60 13.5515.50 Si0.701.50 Nb0.200.80 7.75 211 11 21.9 195 360 22 96 230NCA-1 0.03 0.60 17.0019.00 Al2.004.00 Ti0.50 7.35 201 10.0 18.8 490 20 95 220NCA-2 0.05 0.60 11.5013.50 Al0.502.00 Si1.002.00 Ti0.30 7.65 201 10.0 23.8 490 20 95 220
0.15 0.60 11.5013.00 7.75 202 9.9 23.8 205 440 20 200 93 2100.15 0.60 11.5013.50 7.75 202 9.9 23.8 205 440 20 200 93 2100.08 0.60 11.5013.50 7.75 202 9.9 23.8 205 410 20 183 88 200
410M4 0.040.10 0.60 11.5013.50 Si0.100.40 Mn0.501.00 7.75 202 9.9 23.8 205 410 20 88 200410M5 0.030.06 0.60 11.5012.10 0.50 Cu0.700.90 7.75 203 10.1 24.3 205 410 20 88 200
0.160.25 0.60 12.0014.00 7.75 202 10.3 23.8 225 520 18 223 97 2340.260.40 0.60 12.0014.00 7.75 202 10.3 23.8 225 540 18 235 99 247
WR-1 0.200.40 0.50 12.0014.00 Nb0.300.50 7.70 201 10.3 24.9 225 540 18 247HT980 0.030.06 3.005.00 12.0014.00 Ti0.150.50 7.75 203 10.8 20.5 735 880 3 290HT1770 0.09 6.507.75 13.5015.50 Si1.002.00 Cu0.401.00 Ti0.200.65 7.75 207 10.9 24.9 10001200 11001800 3 300500HT1770M 0.09 6.507.75 13.0014.50 0.701.20 Si1.002.00 Cu0.401.00 Ti0.200.65 7.75 207 10.9 24.9 10001200 11001800 3 300500HT2000 0.050.10 7.808.80 13.0014.00 1.802.70 Si2.203.20 7.80 200 14.0 20.8 16002200 17002300 1 500650431DP2 0.08 1.003.00 16.0018.00 7.73 201 10.5 19.9 7501200 10501300 6 340400
Type
JISSUS
445J1410L
403410410S
420J1420J2
632J1
SUH409409M1 0.03 0.50 10.5012.00 Ti5CN0.75 7.75 202 9.9 23.8 195 360 25 85 170409M1S 0.03 0.50 10.5012.50 Si0.30 Ti5CN0.75 7.75 202 9.9 23.8 175 360 25 79 150
405 0.08 0.60 11.5014.50 Al0.100.30 7.75 202 10.8 23.8 175 410 20 183 88 200430 0.12 0.60 16.0018.00 7.70 201 10.4 26.2 205 450 22 183 88 200430LX 430M2 0.05 0.60 16.0018.00 Ti5CN1.00 7.70 197 10.4 26.2 175 360 28 170430LX 430M4 0.03 0.60 16.0018.00 Nb0.200.65 7.70 201 10.4 26.0 205 450 22 88 200
430M3 0.04 0.60 16.0018.00 0.200.50 Ti10C1.0 7.70 202 10.4 26.0 205 450 22 88 200436L 436 0.025 0.60 17.0019.00 0.501.50 N0.025 Ti8CN0.80 7.70 202 10.4 26.2 205 450 22 183 88 200436J1L 0.025 0.60 17.0020.00 0.400.80 N0.025 Nb8CN0.80 7.70 245 410 20 90 200436J1L 432 0.025 0.60 17.0019.00 0.450.65 N0.020 Nb8CN0.80 7.70 205 390 25 170430J1L 442M3 0.03 0.60 18.0020.00 Cu0.300.80 Nb7CN0.150.80 7.70 201 10.4 26.2 205 450 22 88 200430J1L 442M3S 0.03 0.60 18.0020.00 Si0.50 Cu0.300.80 Nb7CN0.80 7.75 201 10.4 26.2 245 410 22 88 200444 444N 0.02 0.60 17.5020.00 1.752.50 N0.02 Nb10CN0.80 7.75 199 10.0 22.5 205 450 22 220
EM-2 0.02 0.60 17.5020.00 1.752.50 Mn0.701.50 Cu0.100.30 7.75 206 9.9 21.9 205 450 22 220
Martensitictype
High tensiletype
(including precipitationhardening type)
Dual-phase type
9 Nisshin Steel Quality Products
Characteristics and Applications
3. Characteristics and Applications
ClassificationType
Characteristics ApplicationsJISSUS
NisshinNSS
Austenitic type
301L High strength can be obtained by skinpass. Highly resistant tointergranular corrosion. Railway rolling stock
301 High strength can be obtained by skinpass. Steel belts, metal gasket, springs304 Typical austenitic stainless steel. Sundries, kitchen utensils, LNG tanks, others
304S Soft and amenable to deep drawing. Sundries304ES Amenable to deep drawing, cold forging and shape freezing, etc. Deep drawing sensor case, flange
XM7 Cold working increased by adding copper to type 304. Sundries, Used for cold headingXM7 Cold working increased by adding copper to type 304. Sundries, Used for cold heading304M2 Amenable to deep drawing and stretch forming. Sundries, door knobs, sink bowls304M3 Amenable to high speed bulging expanding. Gas burner parts
304L Lower carbon content than type 304, high resistance tointergranular corrosion. Oil refinery and papermaking equipment
304N1Strength increased by adding nitrogen to type 304 whilekeeping its ductility.
High strength material for construction,colored fume pipe
305 Less work hardenability than type 304. Used for spinning, cold heading
305M3 High spring characteristics and high strength with no magnetism. Magnetic head cover
302B 302B More oxidation resistant than type 302, equal in oxidationresistance and strength with type 310S under 900C. Automotive exhaust gas purifiers
XM15J1 ER-1 Equal in oxidation resistance with type 309S (high qualityoxidation resistant steel).Automotive exhaust gas purifiers, materialfor burning part
ER-4High temperature salt corrosion resistance and chloridemolten salt corrosion resistance.
Automotive flexible tube, incinerator
310S High quality oxidation resistant steel. Nitric acid tanks and burning chamber parts
316 Highly corrosion resistant. Slightly magnetized after forming. Chemical and paper industry equipmentand VTR guide rollers
316L Lower carbon content than type 316, highly resistant tointergranular corrosion.Chemical, paper, dye and fertilizer industryequipment
315J2 SCRResistant to stress corrosion cracking and has equal crevicecorrosion resistance with type 316.
Boilers and electric water heaters, indoorplumbing
305M1 Extreme deep drawing is possible. Slightly magnetized after forming. TV electron guns and electronic parts
10Nisshin Steel Quality Products
Characteristics and Applications
4. Characteristics and Applications
ClassificationType
Characteristics ApplicationsJISSUS
NisshinNSS
Ferritic type
SUH409 Oxidation resistant steel developed by adding titanium to 11Cr type. Automotive parts and exhaust gas purifiers
445J1 Corrosion resistance increased by adding chromium to type 436L. Electronic portable water heater, roofing material445J1 445M2 High corrosion and weather resistance Building materials410L 410M1 Developed by reducing carbon content in type 410. Highly workable. Automotive exhaust gas purifiers and exhaust pipes
HR-1 High heat resistant 14Cr-Si-Mn-Nb Steel with high temperature strength and oxidation resistance. Automotive exhaust pipesNCA-1 18Cr-Al Steel with high oxidation resistance. Oilstove burning columns which must heat redNCA-2 13Cr-Si-Al Steel exhibiting high oxidation resistance. Oilstove burning columns
403 Developed by reducing silicon content in type 410. Valve sheets410 Typical 13Cr stainless steel. Low quenching hardenability. Turbine blades, spoons, forks410S Developed by reducing carbon content in type 410 to below 0.08%. High workability. Sundries and distillation column trays
410M4 Designed so that maximum Rockwell hardness of about 35 canbe obtained only by hardening in wide temperature range. Disk brakes
410M5 Shape stability after quench hardening increased by adding copper. Disk brakes420J1 High quenching hardenability and work hardenability. Machine parts, table-knives420J2 High quenching hardenability and work hardenability. Table-knives, slide calipers, rulers, scissors
WR-1Strong resistance can be obtained against abrasive polishingby hard grain.
Loom parts
HT980 High strength can be obtained by quench hardening at 750 or higher temperatures. Steel belts and high tension materials for welding
632J1 HT1770 Workable at low hardnesses because of high hardenabilityobtainable with age-hardening. High workability and long mold life. Seat sensor parts, punched springs
HT1770M High toughness, high strength and high fatigue strength can be obtained by adding molybdenum. Steel belts, golf club headHT2000 High strength with ductility, toughness and fatigue strength. ID saw blades, flapper valve
431DP2Spring characteristics can be obtained by a short-time age-hardening.
Automotive parts, wrapping carrier, pressplate
409M1 Type 409 modified by increasing workability, oxidation resistance and high frequency weldability. Automotive exhaust pipes409M1S Formability increased by reducing silicon content in type 409M1. Automotive exhaust pipes
405 Weldability and workability increased by adding aluminum to type 410. Oil refining distillation column trays430 Typical ferritic stainless steel. Kitchen utensils, sundries, stove reflectors
430LX 430M2 Developed by adding titanium to type 430. Has higherworkability, weldability and corrosion resistance than type 430.Sink bowls, burners, bicycle rims and bathheater external plates
430LX 430M4 Developed by adding niobium to type 430 for increased workability and weldability. Bicycle rims and automotive parts such as wheel covers430M3 Developed by adding molybdenum and titanium to type 430. High workability, weldability and corrosion resistance. Boilers
436L 436 More corrosion resistant than type 432 under the circumstance of dew condensation of exhaust gas. Material for automotive muffler434 Developed by adding molybdenum to type 430. More corrosion resistant than type 430. Automotive trimmings436J1L Developed by adding molybdenum and niobium to type 430, and highly reducing the carbon content and nitrogen content. Boilers, material for building interior and exterior
436J1L 432Corrosion resistant under the circumstance of dew condensationof exhaust gas and has better salt corrosion resistance.
Material for automotive muffler
442M3 Developed by adding copper and niobium to type 430. More corrosion resistant than type 434. Automotive trimmings, Automotive exhaust pipes442M3S Formability increased by reducing silicon content in type 442M3. Automotive exhaust pipes
444 444N Free from stress corrosion cracking. Equal in corrosion resistance to type 316. Water reservoirs, heat reservoirs, solar heater collectorsEM-2 18Cr-2Mo-Mn-Nb Steel with high temperature strength and scale detachment resistance. Automotive exhaust pipes
Martensitictype
High tensiletype
(including precipitationhardening type)
Dual phasetype
11 Nisshin Steel Quality Products
NoteValues adjacent to symbols and are chemical composition standard percentage.Values adjacent to symbol = are chemical composition representative percentage.
Increase in carbon contentIncrease in carbon content Addition of niobium
Addition of copper
(Increased high temperature oxidation resistance)
Extremely low carbon content
(Increased weldability and workability)
(Increased weather resistance and intergranular corrosion resistance)
(Increased weldability and intergranular corrossion resistance)
(Softening, increased weldability)
Addition of aluminum
Low carbon content,addition of silicon and aluminum
Addition of titanium
(Workability, corrosion resistance and weldability)
Extremely low carbon content, addition of molybdenum and titanium
(Increased pitting corrosion resistance and intergranular corrosion resistance)
(Non-hardening, increased weldability)
(Quench hardening stability at low hardness)
Reduction in silicon content
Reduction in carbon content and manganese content
Reduction in carbon contentExtremely low carbon content
Low carbon content,addition of titanium
Low carbon content, addition of niobium
Saving molybdenum, low carbon content, addition of copper and niobium
Extremely low carbon content,addition of titanium
(Increased formability and weldability)
Addition of niobium, reduction in molybdenum content
(Increased formability and weldability)
Addition of molybdenum
Addition of manganese
(Increased high heat resistance and scale detachment resistance)
(Increased age-hardenability and Introduction of spring characteristics)
(Increased corrosion resistance)
(Increased formability)
Addition of nickel and titaniumReduction in carbon and nitrogen content
(High strength and high toughness after welding)
Addition of silicon and copper
(Introduction of precipitation hardenability)
(Increased hardenability and wear resistance)
(Increased corrosion resistance and formability)
Extremely low carbon and nitrogen content, increase in molybdenum content, addition of niobium
Extremely low carbon and nitrogen content, increase in chromium content, addition of molybdenum, niobium and titanium
(Increased corrosion resistance, weldability, and intergranular corrosion resistance)
(Increased corrosion resistance, weldability and intergranular corrosion resistance)
Extremely low carbon content, addition of aluminum
(Increased high temperature oxidation resistance)
SUS410
SUS 420J 1
C=0.160.25
SUS 403
Si0.50
SUS 410S
C0.08
NSS HT 1770
15Cr-7Ni-0.7Cu-0.4Ti
NSS HT 980
12.5Cr - 4Ni-Ti
NSS 430M2
C=0.03 Ti = 7CN
NSS 430M3
C=0.01 Mo=0.4 Ti=0.55
NSS 444N
C, N0.02 Mo=2.0 Nb=0.4
NSS 442M3
19Cr-0.5Cu-0.5Nb
NSS 436
18Cr-1Mo-0.5Ti
NSS 432
18Cr-0.5Mo-0.4Nb
NSS 445M2
22Cr-1.2Mo-Nb-Ti
NSS 430M4
C = 0.03 Nb = 0.200.65
SUS 434
Mo=1.0
SUS 420J2
C=0.260.40
NSS WR-1
C=0.25 Nb=0.36
NSS 410M5
C=0.05 Mn=0.7 Cu=0.8
NSS 410M4
C=0.07 Mn=0.7
NSS 410M1
C0.03
SUS 405
Al=0.2
SUH 409
Ti6C
NCA-2
C0.05 Si=1.5 Al=1.0
NSS HR-1
14Cr-1Si - 1Mn-0.4Nb
NSS 409M1
C0.03 Ti5CN
NSS 431DP - 2
C0.08 17Cr Ni2.0
NSS EM - 2
Mn=1.0 Mo=2.0 Nb=0.4
NCA - 1
C0.03 18Cr-3Al-Ti
Base type of 13Cr steel
C0.15
SUS430
Base type of 18Cr steel
C0.12
(High heat resistance)
Addition of silicon, manganese and niobium
Types of Stainless Steel Available
1. JIS series and NSS series (Nisshin Steel)
12Nisshin Steel Quality Products
Types of Stainless Steel Available
Reduction in chromium and nickel contents
Reduction in carbon content,Addition of nitrogen
Addition of silicon,molybdenum and copper
(Increased stress corrosion cracking resistance)
Addition of silicon, copper and molybdenum
Addition of molybdenum and copper
Addition of molybdenum
Increase in silicon content
Increase in chromium and nickel contents
(Increased corrosion resistance and high temperature oxidation resistance)
(Increased heat resistance and high temperature oxidation resistance)
Increase in silicon content,addition of niobium
(Increased heat resistance)
Addition of molybdenum
(Increased high temperature salt corrosion resistance)
(Increased acid resistance and pitting corrosion resistance)
Extremely low carbon content
(Increased intergranular corrosion resistance)
Increase in nickel content
(Work hardenability)
Increase in manganese content
(Removal of magnetism)
Increase in nitrogen content
(Increased strength, introduction of spring characteristics)
Addition of copper
(Low magnetism)
Extremely low carbon content
(Increased intergranular corrosion resistance)
Addition of manganese and copper
(Softening)
(Increased age-hardenability and corrosion resistance)
Addition of silicon and copper
(Increased workability and season cracking resistance)
Addition of manganese and copper
(Highly softening)
(Introduction of work hardenability, increased strength)
SUS304
SUS 301
17Cr-7Ni
SUS 316
18Cr-12Ni-2Mo
NSS SCR
19Cr-12Ni-3Si-2Cu-0.8Mo
SUS 316L
C0.030
NSS 305M3
19Cr-12Ni-3Mn-0.15N
SUS305
18Cr-12Ni
NSS 304M2
16Cr-7Ni-1.5Si-1.8Mn-2Cu
NSS 304ES
17Cr-8Ni-1.6Mn-3Cu
SUS 304L
C0.030
NSS 302B
18Cr-9Ni-2.5Si
NSS ER - 1
19Cr-13Ni-3Si-0.1Nb
SUS 310S
25Cr-20Ni
SUS 301L
C0.030 N=0.09
NSS HT2000
14Cr-8Ni-2Mo-3Si
NSS ER - 4
17Cr-13Ni-2.5Si-2.5Mo
NSS 304S
19Cr-9Ni-1.5Mn-1Cu
NSS XM7
18Cr-9Ni-1.6Mn-3Cu
Base type of 18Cr-8Ni steel
C0.08
NSS 305M1
16Cr-12Ni-3Mn
NoteValues adjacent to symbols and are chemical composition standard percentage.Values adjacent to symbol = are chemical composition representative percentage.
2. JIS series and NSS series (Nisshin Steel)
13 Nisshin Steel Quality Products
Available Sizes
Products of sizes other than shown below will be made to order.1Hot-rolled productsbands SUS 304 / No.1ThicknessWidth
SUS 304 and SUS 430(Hot-rolled products)
Thickness(mm)
Wid
th(m
m)
1,250
1,000
200
9.02.5 3.3 3.83.0
300
660
Contact your nearest Nisshin dealer before placing an order...
2Hot-rolled productsbands SUS 430/ No.1ThicknessWidth
Thickness(mm)W
idth
(mm
)
1,250
1,000
200300
9.02.5 3.0 3.53.3 3.8
660
Contact your nearest Nisshin dealer before placing an order...
4Hot-rolled productsplates SUS 430/ No.1ThicknessWidth
Thickness(mm)
Wid
th(m
m)
1,250
1,000
200
9.03.02.5
3Hot-rolled productsplates SUS 304 /No.1ThicknessWidth
Thickness(mm)
Wid
th(m
m)
1,250
1,000
200
9.03.02.02.49
Contact your nearest Nisshin dealer before placing an order...
5Hot-rolled productsplates SUS 304, SUS430/ No.1ThicknessLength
Len
gth
(m)
8
6
4
2.0 5.5 9.0Thickness(mm)
14Nisshin Steel Quality Products
Available Sizes
Products of sizes other than shown below will be made to order.1Cold-rolled productsstrips SUS 304/2B, 2DThicknessWidth
SUS 304 and SUS 430 (Cold-rolled products)
502010
200
1,000
914
660
1,250
100
0.2 2.52.049 3.2 5.04.0 6.00.3
Contact your nearest Nisshin dealer before placing an order...
Thickness(mm)
Wid
th(m
m)
2Cold-rolled productsstrips SUS 430/ 2B, 2DThicknessWidth
1,250
1,000
1050
660
914
5.04.03.22.52.0490.30.2
20
Contact your nearest Nisshin dealer before placing an order...
Thickness(mm)W
idth
(mm
)
4Cold-rolled productssheets SUS 430/ 2B, 2DThicknessWidth
1,250
1,000
100200
600
5.03.02.50.30.2 2.049
Contact your nearest Nisshin dealer before placing an order...
Thickness(mm)
Wid
th(m
m)
3Cold-rolled productssheets SUS 304/2B, 2DThicknessWidth
100
600
1,000
1,250
200
0.2 0.3 2.049 2.5 3.0 6.0
Thickness(mm)
Wid
th(m
m)
Contact your nearest Nisshin dealer before placing an order...
5Cold-rolled productssheets SUS 304, SUS430/2B, 2DThicknessLength
0.2
1.5
2.0
3.05
4
6
8
3.3
0.2
Width200mm
Width200mm
0.2 0.3 0.5 0.8 2.049 2.5 3.0 6.0 0.3 2.049
Contact your nearest Nisshin dealer before placing an order...
Len
gth
(m)
Thickness(mm)
15 Nisshin Steel Quality Products
1. Hot-rolled products and Cold-rolled products
Finish
Classification JIS Nisshin Finish
Hot-rolledproducts
No.1 Heat-treated and pickled after hot rolling.CG Given No.1 finish and polished with any of endless belts specified in JIS R6001, but not degreased.
Cold-rolledproducts
No.2D Heat-treated and pickled after cold rolling.No.2DR Heat-treated, pickled and lightly cold-rolled by dull rolls after cold rolling.
No.2B Heat-treated, pickled and lightly cold-rolled to obtain appropriate luster surface after cold rolling.No.3 Polished with endless belt of No.100 to 120 specified in JIS R6001.No.4 Polished with endless belt of No.150 to 180 specified in JIS R6001.#320 Polished with endless belt of No.320 specified in JIS R6001.#400 Polished with endless belt of No.400 specified in JIS R6001.
No.9 Polished with endless belt numbered over 320.BA Given high-luster finish and subjected to bright heat treatment after cold rolling.HL Polished with abrasives No.80 to 150 specified in JIS R6001 to obtain continuous streaks.
No.7 Buffed so that reflectivity is higher, compared to #400 finish.No.8 Given BA finish and polished with cotton buff to obtain high reflectivity.Emboss Provided with irregularities on one side by cold rolling (both sides can be embossed).
Note: Please refer to the sample books for the standard surface finish.
2. Examples of surface finish
SUS 304, No.2D SUS 304, No.2B SUS 430, No.2B
SUS 304, BA SUS 430, BA SUS 304, No.8
SUS 304, No.4 SUS 304, HL Emboss
16Nisshin Steel Quality Products
Surface-Treated Stainless Steel
1. Surface-Treated Stainless Steel Products
Classification Nisshin Finish
Paint-coatedproducts
Transparent-Paint Stainless Steel Transparent film is colored by baking.Pearl-Toned Transparent-Paint Stainless Steel Transparent film with special pigment is colored by baking.
W-coated Stainless Steel Lubricating film is colored by baking.Colorsoftain Weather resistant paint is colored by baking.
Metal-coatedproducts
Coppersoftain Electrically coated with copper.Alstar Stainless Steel Coated with melted alminum.Tough-Tain Z Coated with melted zinc and subjected to dark gray aspect treatment.
Note: Please refer to the sample books for the standard surface finish.
Colorsoftain Tough-Tain Z
Pearl-Toned Transparent-Paint Stainless Steel Coppersoftain
ThicknessUp to 1000 1000 and over, up to 1250 1250 and over, up to 1600
2.50 and over, up to 3.15 0.30 0.35 0.403.15 and over, up to 4.00 0.35 0.40 0.454.00 and over, up to 5.00 0.40 0.45 0.505.00 and over, up to 6.00 0.50 0.55 0.606.00 and over, up to 8.00 0.60 0.65 0.708.00 and over, up to and incl. 9.00 0.65 0.65 0.65
17 Nisshin Steel Quality Products
Hot-rolled productsJIS G 4304
Dimensional Tolerances
1ThicknessWidth
Up to and incl. 3500 Over 3500, up to and incl. 6000 Over 6000
2Widthcut edge, machine cutting
Length
Plates
ThicknessUp to 100 630 and over,up to 1000 1000 and over
Width
Bands
6.0 and over, up to and incl. 9.0 100100
150
Up to 9.0 50150
200
Thickness
Unitmm
Length Maximum degree of flatness Maximum degree of flatnesssymbol : EF
Up to and incl. 1000Up to and incl. 2000 15 3Over 2000 20 6
Over 1000, up to and incl. 1580Up to and incl. 2000 20 6Over 2000 20 6
4Degree of flatnessWidth
Unitmm
Unitmm
Unitmm
100 and over,up to 160
160 and over,up to 250
250 and over,up to 400
400 and over,up to 630
100
100
100
100
Up to 6.0 5050
50
50
100
100
100
Up to and incl. 3500 Over 3500, up to and incl. 6000 Over 6000Length
3Plate lengthmachine cutting
Up to and incl. 9.0 100150
300
Thickness
Unitmm
18Nisshin Steel Quality Products
Dimensional Tolerances
ThicknessThickness tolerances
0.35 0.405.00 and over, up to 6.00 0.40 0.45
0.50 0.50
Cold-rolled productsJIS G 4305
WidthUnitmm
Up to 1250 1250 and over, up to 16000.30 and over, up to 0.60 0.05 0.080.60 and over, up to 0.80 0.07 0.090.80 and over, up to 1.00 0.09 0.101.00 and over, up to 1.25 0.10 0.121.25 and over, up to 1.60 0.12 0.151.60 and over, up to 2.00 0.15 0.172.00 and over, up to 2.50 0.17 0.202.50 and over, up to 3.15 0.22 0.253.15 and over, up to 4.00 0.25 0.304.00 and over, up to 5.00
6.00
Thickness
Thickness tolerances
0.10 0.112.50 and over, up to 3.15 0.11 0.12
0.12 0.13
JIS ET
WidthUnitmm
630 and over,up to 1000
1000 and over,up to 1250
0.16 and over, up to 0.25 0.25 and over, up to 0.40 0.038 0.0380.40 and over, up to 0.60 0.040 0.0400.60 and over, up to 0.80 0.05 0.050.80 and over, up to 1.00 0.05 0.061.00 and over, up to 1.25 0.06 0.071.25 and over, up to 1.60 0.07 0.081.60 and over, up to 2.00 0.09 0.102.00 and over, up to 2.50
3.15 and over, up to 4.00
Up to 160 160 and over,up to 250250 and over,up to 400
400 and over,up to 630
0.020 0.025 0.030 0.0300.025 0.030 0.035 0.0350.035 0.040 0.040 0.0400.040 0.045 0.045 0.0450.040 0.05 0.05 0.050.05 0.05 0.05 0.060.05 0.06 0.06 0.060.06 0.07 0.08 0.080.07 0.08 0.08 0.090.08 0.09 0.09 0.100.09 0.10 0.10 0.11
1Thickness
JIS
19 Nisshin Steel Quality Products
Dimensional Tolerances
ThicknessWidth tolerances
Up to 0.6 0.15 0.30 0.500.60 and over, up to 1.00 0.20 0.30 0.501.00 and over, up to 1.60 0.20 0.40 0.601.60 and over, up to 2.50 0.25 0.50 0.702.50 and over, up to 4.00 0.30 0.50 0.80
Sheets and stripsEW
WidthUnitmm
Up to and incl. 3500 Over 3500, up to and incl. 6000 Over 6000
2Widthcut edge
Length
Sheets
Strips
Up to and incl. 6.0 50150
200
Thickness
Unitmm
Unitmm
Up to and incl. 1524 Over 1524Width
Up to and incl. 6.0 50100
Thickness
Up to 160 160 and over, up to 250 250 and over, up to 400 400 and over, up to 630 630 and over, up to 10000.20 0.250.25 0.250.30 0.300.35 0.350.40 0.40
Up to and incl. 3500 Over 3500, up to and incl. 6000 Over 6000Length
3Sheet length
Up to and incl. 6.0 100150
300
Thickness
Unitmm
Length Maximum degree of flatness Maximum degree of flatnesssymbol : EF
Up to and incl. 1000Up to and incl. 2000 15 3Over 2000 20 6
Over 1000Up to and incl. 2000 20 6Over 2000
For specifications for edge waves and center buckles, please consult beforehand.
20 6
4Degree of flatnessWidth
Unitmm
20Nisshin Steel Quality Products
Applications
System kitchen (SUS 304 AND 430)
Knives (SUS 420J2)
Kitchen utensils (SUS 304) Washing machine basket (NSS 442M3)
Composite post (Transparent-Paint/SUS304)Hot water reservoir (NSS444N)Oil burning boiler(NSSSCR)
Golf club head face (NSSHT1770M)
Automotive special washer (NSS431DP-2)
21 Nisshin Steel Quality Products
Applications
Railway rolling stock (SUS 301L)
Automotive exhaust manifold (NSSHR-1)Motorcycle disk brake (NSS 410M4)
Super deep drawing sensor case (NSS304ES) Super deep drawing parts (NSS304ES)
22Nisshin Steel Quality Products
Applications
Water tank (NSS 444N)
Building exterior wall, embossed stainless steel"STARLIGHT" (SUS 304)
and perforated stainless steel (SUS 304)
Surface of embossed stainless steel"STARLIGHT"
23 Nisshin Steel Quality Products
Applications
SEIBU DOME STADIUM (NSS445M2)
SAITAMA STADIUM (NSS445M2) SAITAMA SUPER ARENA (NSS445M2)
24Nisshin Steel Quality Products
Applications (Steel Forming technology Institute "Annex")
The Annex building is the Japans first full-scale two-story structure designed and constructed according to the "Standards" forStainless Steel Structure Design and Construction (Draft). "Only esthetic stainless steel sheet developed by Nisshin have beenextensively used as internal and external walls and roofs as well as columns and beams.
Exterior panels (embossed stainlesssteel "STARLIGHT", Fine Color Black)
Frontal view
Entrance hall
1st story column (Rectangularpipe, mirror finish)
1st and 2nd story column (Rectangularpipe, hair line finish) 1st story beam(Rectangular pipe, hair line finish)
Ceiling (Mirror finish, Fine Crystal Class1)
Stainless steel system trusses (Neues Bronze)
Ceiling panels (Perforated stainlesssteel, bead shot finish)
Eaves column (Round pipe, mirror finish)
Eaves column (Rectangular pipe, mirrorfinish)
Interior panels (STARLIGHT)
Interior panels (Hair line finish, Neues Black)
Interior panels (Pattern:etched, finish:fine satin)
Blind(perforated stainless steel, laminated glass)
25 Nisshin Steel Quality Products
Types of Protective Coatings
Packaging
Characteristics of protective coatings vary with storage and use environments. So the protective coated products should bestored in places well ventilated and protected from direct sunlight at temperatures lower than 30C. Please use products withprotective coating SPV 224 within one year of delivery and products with other coatings within three months of delivery.
Products other than shown above are available to order.
Thicknessm
Characteristics Uses
SPV 205 130 Little adhesive remains. Apt for simple bend forming,but not for deep drawing and roll forming. Building material
80 Exhibits high weatherability. Apt for drawing and rollforming when sheet thickness is 1.0mm or less. Kitchens
SPV 363 60Apt for light forming such as bending when sheetthickness is 1.0 mm or less, but not for drawing androll forming.
Microwave oven
Type
SPV 224
Color Material
White PVC film
Blue PVC film
Clear PE
Elongation
Tensile strengthN/25mm
220 89
200 50
350 38
Adhesion
Medium
Medium
Low
Standard packaging is shown below.
26Nisshin Steel Quality Products
Coil Unit Weight Diagram
Information Needed to Meet Orders
300
0
400500
600700
800900
1,100
1,200
1,300
1,400
1,600
1,700
1,800
1
2
3
4
5
6
7
8
9
10
11
12
14
13
15
16Coil unit weight (kg/mm)
Coil outer diameter (mm)
400
500
600610
762
700
800
Coil inner diameter (mm)
NoteThis diagram slightly changes with sheet thickness and interleafs.
Stainless steel best offers its features when it is suitable for the usepurposes, design and forming conditions.To select the type of stainless steel meeting your specificrequirements, include in your order as detailed information onthe following items as possible.
1. Steel type, finish and dimensions2. Use and forming method3. Specification requirements: thickness, width, lengthtolerances and packaging unit weight (coil inner diameter)
4. Quantity and time of delivery5. Other
Technical MaterialThis catalog discloses the outline of our stainless steelproducts. For further information, refer to the followingcatalogs and brochures.*A Guide to Stainless Steels (outline of stainless steels)*Characteristics of Stainless Steels (extraction from "A Guide toStainless Steels")*Heat Resistance of Stainless Steels (comparison ofcharacteristics of heat resistant steels)*Catalog for each type of NSS Steels*Stainless Steels for Roofs (catalog ofCoppersoftain, Colorsoftain and Colorsoftain F)
Printed in Japan on recycled paper Q-01 '07.01
Technical information in this booklet, while every reasonable effort was made to ensure the accuracy at the time of this publication, is general information relating to our products only and is not meant as any warranty, expressed or implied. Such technical information does not guarantee that any of our products are suitable for your particular application or purpose. Use of any information contained in this booklet shall be at user's risk. Any information in this booklet is subject to change without prior notice. Please contact Nisshin Steel office for updated information.
Notice
JAPANRegistered Head OfficeShinkokusai Building, 4-1, Marunouchi 3-chome, Chiyoda-ku,
Tokyo 100-8366, Japan
Telephone:81-33216-6312 Facsimile:81-33216-6325
OVERSEASSingapore Representative Office16 Raffles Quay #20-01, Hong Leong Bldg., Singapore 048581
Telephone:656221-1277/8 Facsimile:656224-2357
Bangkok Representative OfficeUnit 6, 35th Floor, CRC Tower All Seasons Place,
87/2 Wireless Road, Phatumwan, Bangkok 10330, Thailand
Telephone:662-654-0783 Facsimile:662-654-0981
Guangzhou Representative OfficeRoom 1505, Office Tower, CITIC Plaza, 233 Tian He North Road,
Guangzhou 510613, P.R.China
Telephone:8620-3877-1054 Facsimile:8620-3877-1094
Subsidiary Nisshin Steel USA, LLC1701 Golf Road, Continental Tower3, Suite1004,
Rolling Meadows, IL 60008 U.S.A.
Telephone:1-847290-5100 Facsimile:1-847290-0826
Tsukiboshi (Shanghai) Steel Treading Co.,Ltd.Shanghai Maxdo Centre 3208-3210, 8 Xing Yi Road,
Hongqiao Development Zone, Shanghai 200336, P.R.China
Telephone:86-215208-0736 Facsimile:86-215208-0639
www.nisshin-steel.co.jp