Take non-contact, point-cloud measurement to a higher level with laser scanning systems powered by NDI’s advanced Optical Tracker.
Quickly bring physical parts into the digital domain with handheld laser scanners that combine instant tracking performance with high-speed, non-contact surface scanning.
Laser Scanning Applications
• Reverse engineering
• Part-to-CAD inspection
• 3D visualization and modeling
• Rapid prototyping
• Precious artifact archiving
Produce robust 3D data with the
ScanTRAK handheld laser scanner,
featuring the industry-leading
Perceptron V5 sensor.
Reduce operator fatigue with
ergonomic and lightweight scanner
design.
Perform walkabout scanning without beam-breaks, mechanical linkages, or photogrammetry targets.
Conveniently sweep ScanTRAK across surfaces to capture dense point-cloud measurements that define part geometry
Measure difficult surfaces without powder or spray, including shiny black.
Measure accurately in unstable environments with Dynamic Referencing (near stamping presses, forklifts, vibrating machinery, etc.)
Use the system’s large measurement volume to scan large parts in one step.