A presentation by Sentry Air Systems
© Copyright 2013. All Rights Reserved.
Simple Solutions to Multiple Operator Fume Extraction
Are you looking to supply fume extraction systems to multiple
operators but you either…
Don’t have enough space?
Your resourcesare limited?
OR
? ?
Consider a Sentry Air Systems Multi-Station Fume Extraction System
Up to
20 workstations
This multi-operator system is designed utilizing a single Sentry Air Model 450 with multiple flex arms.
This sleek and efficient design saves valuable floor space and is an economical solution over purchasing individual units per operator.
This system delivers a specified air flow dependent on the amount of arms attached and the length of piping utilized*.
The below chart outlines approximate CFM (cubic feet per minute) based on filtration media and arm count.
*Sentry Air Systems will supply the fume extractor and self-supportive flex arms but is not responsible for providing tubing/piping or the attachment of any elements to the apparatus.
2528323743515454555722 lb. Heavy-Duty Carbon CFM
39435361688182828590HEPA & Pre-Filter CFM
19-20 Arms
17-18 Arms
15-16 Arms
13-14 Arms
11-12 Arms
9-10 Arms
7-8 Arms
5-6 Arms
3-4 Arms
1-2 Arms
Our custom solution for a client
Our systems make the most
out of every CFM!
PROBLEM: One of our customers’ existing fume extractor was not adequately sized for their 72-inch long workbench. As a result, renegade fumes and smoke were not being captured.
SOLUTION: Our solution was to design this multi-station system with 3 flex arms located at various points along the bench. This allowed workers to easily grab a hose from any point along the bench.
VALUE: This design easily fit to their exiting bench and will capture more fumes and save thousands in potential costs over purchasing individual units.
Additional ConfigurationsDual Arm Fume Extractors
Floor Sentry DoubleModel SS-200-FSDUp to 50 CFM per arm
Floor Sentry DoubleModel SS-300-FSDUp to 175 CFM per arm
Floor Sentry DoubleModel SS-400/450-FSDUp to 350/475 CFM per arm
Additional ConfigurationsQuad Arm Fume Extractors
Floor Sentry QuadModel SS-300-FSQUp to 85 CFM per arm
Floor Sentry QuadModel SS-400/450-FSQUp to 175/235 CFM per arm
MULTI ARM FUME
EXTRACTORS
Great for a variety of applications and work environments.