Mongolian Agency forStandardization and
Metrology
18 July, 2007
Mongolian Agency forStandardization and Metrology
Content
Quick facts about MongoliaQuick facts about Mongolia MASM Introduction
Standardization and Technical Regulation Department
Certification Metrology Accreditation
Quick facts about MongoliaQuick facts about Mongolia
MAP OF MONGOLIA
Capital:Capital: UlaanbaatarUlaanbaatar
Total population: Total population: 3.0 million (July 2006 est) 3.0 million (July 2006 est)
Area: Area: 1.565 million sq km.1.565 million sq km.
Location: Northern Asia, between China and Russia
Quick facts about MongoliaQuick facts about Mongolia
• Population: 2.4 mln (with low density of 1.5 persons per sq.km)
• More than 10 ethnic groups, (75%- Khalkh, 7%-Kazakhs and others)
•Language: Mongolian
•Religion: More than 90%-Tibetan Buddhist Lamaism, 6%-Muslim
•Climate: Extreme continental, 4 distinct seasons (-25 C in January; +25 C in July)
History of MongoliaHistory of Mongolia
• Mongolia was inhabited 500.000 years ago. Mongolia was inhabited 500.000 years ago.
• First state was established by Huns tribes in 209 B.C. First state was established by Huns tribes in 209 B.C.
• Great Mongol Empire under Chinggis Khan was Great Mongol Empire under Chinggis Khan was established in 1206. established in 1206.
• Conquest by Manchu Empire during XVIII-XIX Conquest by Manchu Empire during XVIII-XIX centuries. centuries.
• Restoration of Mongolian sovereignty in 1911. Restoration of Mongolian sovereignty in 1911.
• Creation of People's Republic of Mongolia in 1924 Creation of People's Republic of Mongolia in 1924 (under communism). (under communism).
• Establishment of democracy in 1990.Establishment of democracy in 1990.
Mongolian Agency forStandardization and Metrology
MASM
MASM (Mongolian Agency for Standardization and Metrology) is a Government regulatory agency responsible for policy coordinating and managing of standardization, metrology, accreditation, certification, testing and quality sectors in Mongolia.
Mission
To contribute to the social and economic development of Mongolia in conjunction with he development strategic tendency by applying standardization, quality and metrology.
Mongolian Agency forStandardization and Metrology
Organization structure
MASM continues to operate activities with 120 employees and provide professional guidance and methodology to branch offices in 20 aimaks.
Mongolian Agency forStandardization and Metrology
Mongolian Agency forStandardization and Metrology
The main functions are:
Standardization and implementation of TBT agreement Certification Establishment and maintain of national measurement standards Legal metrology AccreditationTraining and consulting International cooperation
Funding: State budget Foreign and domestic projects and programme Science and Technology fund Self-financing
Basic laws: Constitution of Mongolia Law on Standardization and Conformity
assessment, 2003 Law on Guarantee the uniformity of
measurement, 1994
Mongolian Agency forStandardization and Metrology
Standardization and Technical Regulation
Main purposes of standardization
Enhancement of the compatibility of products, as well as to ensure proper usage of all types of resources and interchangeability of products,
Protection of public interest, human health, the environment and security of the nation
Provision of uniformity of testing and measurement.
“LAW OF MONGOLIA ON “STANDARDIZATION AND CONFORMITY ASSESSMENT”
Standardization and Technical Regulation
Equal participation of the representatives from government, NGO, producers and consumers;
Compliance with social interests; Independence The standards shall be based on latest scientific and technological
achievements and contain concise and coherent contents. The development process of the national standards shall be based
on related international standards. The standards shall not be create unnecessary obstacles to the
trade and manufacture.
“LAW OF MONGOLIA ON “STANDARDIZATION AND CONFORMITY ASSESSMENT”
Standardization principles
Standardization and Technical Regulation
Standardization policy
Identification of the national standardization system and legal documents with the international approaches
Harmonization of national standards with international ones;
Elimination of technical barriers to trade (adoption of voluntary basis standards);
Development of standards with market demand and public purpose standards;
Implementation of quality and environmental management systems;
Standardization and Technical Regulation
• Management and coordination the activities of national standardization technical committees
• Harmonization of national standards with international ones
• Coordination of implementation of WTO Technical barriers to trade agreement
• Implementation and transfer of new and advanced technology through the international and regional standards
The main activities of national standardization
Standardization and Technical Regulation
National Council for Standardization
National Council for standardization confirms national standards (MNS) on the base of mutual consensus representing government, manufacturers, businessmen and consumers’ interest.
National Council for Standardization is approved by the Government. It consists of 18 members, who represent governmental and non-governmental organizations and is lead by MASM Chairman.
Standardization and Technical Regulation
STANDARDIZATION TECHNICAL COMMITTEES
National standardization technical committee (TC) - 25
National standardization technical committee (TC) - 25
Standardization Sub Committee (SC) - 16
Standardization Sub Committee (SC) - 16
Standardization and Technical Regulation
Standardization technical committeesmembers structure
14%
51%
15%
20%
Consumer
Government
Research
Company
Standardization and Technical Regulation
90
10
75
25
45
55
47
53
0102030405060708090
100
2000 2002 2004 2005
VoluntaryMandatory
Number of national standards
38854140
44604780
2002 2003 2004 2005
Percentage of national standards by standardization object
5%14%
37%
44%
Teminology standards
Basical standards
Testing standards
Product standards
Standardization and Technical Regulation
Standardization and Technical Regulation
National WTO/TBT Enquiry point
The central standardization body shall run an Information and Enquiry Center.
The Information and Enquiry Center shall have a national database, consisting of originals or copies of international treaties and agreements, international, regional, foreign and national standards, technical regulations, directives, guidelines, recommendations, conformity assessment procedures and other relevant normative documents related to the products.
LAW OF MONGOLIA ON “STANDARDIZATION AND CONFORMITY ASSESSMENT”
Standardization and Technical Regulation
Main activities are:
information and service on standards, technical regulation and other related documentation ;
•recording and sales of international, foreign and national standards;
•establishment of national standards database (MONGLOBAL);
•use of the PERINORM of EU 16 countries 600 000 standards short text information database;
•establishment an internet access for worldwide Standards information and international full text document servers;
•national standards according to the updated version of the International Classification of Standards;
•the catalogue of Mongolian national standards is updated every 2 year;
•publishing standards, periodicals and other publications.
Standardization and Technical Regulation
Percentage of national standards harmonized
with international ones
18.4%
28%
35%
40%
2000 2002 2004 2006
Foreign relations
MASM is a full member of ISO (International Organization for Srtanadrdization) since 1979, participates in 10 ISO TCs and SC as “P” member and 75 TCs as “O” member.Membership:• ISO – International Organization for Standardization, full member, 1979• IRSA – Inter-Regional Standardization Association, 1997• EAFTerm – East Asian Forum on Terminology, 1998• IEC – International Electrotechnical Commission, joined affiliate country programme, 2000• OIML – International organization for Legal metrology, a corresponding member, 1998• APLMF – Asia Pacific Legal Metrology Forum, 1997• APMP – Asia Pacific Metrology programme, 2002• PASC – Pacific Area Standards Congress, 2002• NCSL International –National conference of Standard Laboratories International, 2002 • APLAC – Asia Pacific laboratory Accreditation Cooperation, 2004• ILAC – International Laboratory Accreditation Committee, 2007
Bilateral cooperation
• KRISS – Korea Research Institute of Standards and Science• KATS – Korean Agency for Technology and Standardization• KSA – Korean Standards Association • TSE – Turkish standard institute• DSTU – The State Committee of Ukraine of Standardization, Metrology and Certification• JSA – Japanese Standardization Association • ASTM – American Society for Testing and Materials• DIN – Germany Standard Institute• CNCA – Certification and Accreditation Administration of the People’s republic of China• Entry – Exit Inspection and Quarantine Bureau of Inner Mongolia, China• BSMI – Bureau of standards, metrology and Inspection, Taipei, Taiwan• STAMEQ – Directorate for Standards and Quality, Vietnam
Center for Training and Research
Center for Training and research is basic division responsible for planning and organizing all seminar, training and study of the organization.
Purpose - to run training in conjunction with the organization policy and strategic tendency and set up an advanced system of research- to perform efficiently the planning and organizational matters of training and study- to increase the quality of training, study and train skillful staff;
Type of trainings:- Methods and guidelines of developing of standards and standardization - Quality management system- Environmental quality management system- Traceability of Measurement Uniformity system- Verification and calibration- Certification of product and service- Accreditation of testing laboratories - to organize training for specialists of testing laboratories