2013/2014ACCESSORIES CATALOGUE
THE MILWAUKEE WAY
OVER 80 YEARS OF HERITAGEMilwaukee offer a wide range of professional and high quality accessories, perfectly adjusted to the performance of the tool. The right accessory is as important as the right tool for the right application. For over 80 years Milwaukee has excelled as an innovator, engineer and pioneer for new technologies.
RANGEWith a range of fast moving consumable lines and unique specialities, Milwaukee accessories meet all the needs and requirements of the professional.By engaging with the end user, Milwaukee is interactively developing problem solving solutions for the various target groups.
COMMITMENT TO QUALITYTesting the robustness of our accessories is an important factor in our value chain. We perform various tests which are carried out under real working conditions as well as computerised testingfacilities.
NEW PRODUCT DEVELOPMENTThe goal has always been to provide users with solutions targeted at improving performance.
EXPERIENCE THE HEAVY DUTY DIFFERENCETools built to do the job better.
At Milwaukee, Heavy Duty is more than just a slogan. It is a promise to offer the best to professional users. Milwaukee engineers don’t just design tools. They design tools to get the job done better, faster, reliably and safely.
HEAVY DUTY WARRANTY milwaukeetools.com.aumilwaukeetools.co.nz
Product Type Warranty Period
Corded power tools 3 (three) years
Cordless NiCd & NiMH power tools excluding batteries and chargers
3 (three) years
Cordless lithium-ion power tools, excluding batteries and chargers
5 (five) year
Cordless lithium-ion powered jackets, excluding batteries and charges
1 (one) year
Product type Warranty period
NiCd & NiMH batteries and chargers 12 (twelve) months
Lithium-ion batteries and chargers 2 (two) years
Power tool accessories and attachments, including chucks,collets, grinder flanges, drill
bits, FIXTEC systems and dust bags 3 (three) months
Consumables; chucks, brushes, O-rings, seals, bearings.
3 (three) months
The range of products and content shown in this catalogue may vary depending on availability.Products and specifi cations may change without notice. Errors and emissions & exceptions disclaimer and copyright.
Product Type Warranty Period
HandtoolsEvery MILWAUKEE hand tool is warranted to the original purchaser only to be free from defects in material and
workmanship. Subject to certain exceptions as set out in this warranty. Refer website for further information.
3
Ice Hardened Hole SawsArbors & Pilot DrillsIce Hardened Hole Saw KitsSDS Plus 2 Cut Drill BitsSDS Plus 4 Cut Drill BitsSDS Plus ChiselsSDS Max ChiselsSDS Max 2 Cut Drill BitsSDS Max 4 Cut Drill Bits21mm K-Hex Drill Bits21mm K-Hex Chisels & Points - Suits Kango 900K & Kango 950KSDS AdaptorsDrill SetsChucksSpeed Feed BitsSpeed Feed KitStandard Self Feed BitsAdaptorsAuger BitsShip Auger BitsFlat Boring Bit KitSwitchBlade™ Self Feed BitsSwitchBlade™ 5 Pce KitBit Extensions
4, 55
6,710111215161617
18, 19, 2021
24, 25, 2628, 2932, 33
333334343434353535
DRILLING
DRIVING
BLADES
HAND TOOLS / WORK GEAR / TOOL ACCESSORIES
SHOCKWAVE™ Driver BitsSHOCKWAVE™ KitsStandard 1/4“ Hex Driver Kits
38, 3940, 41
42
SAWZALL® BladesSAWZALL® Blades Bulk PacksSAWZALL® KitsHACKZALL™ BladesBand Saw BladesCircular Saw BladesMetal Saw Blades
44, 45, 46474848495050
Hand ToolsStiletto HammersWork GearDust Extractor AccessoriesQUIK-LOK® CableFixtec NutRight Angle AttachmentLED BulbsM12 Multi Tool Accessories
52, 53, 545658596060606061
ICE HARDENED HOLE SAWS
SDSDRILLBITS
DRILLSETS
DRILLBITS
SHOCKWAVE™
SAWZALL®
BLADES
BANDSAWBLADES
HANDTOOLS
MISC
4
M18 FUELTM SAWZALL® RECIPROCATING SAW
1 POWERSTATE™ brushless motor provides cutting power you would expect from a corded reciprocating saw.
2 REDLINK PLUS™ intelligence system ensures optimised performance and protection from overloading, overheating, and over-discharging.
3 Powered by Extended Capacity REDLITHIUM™ Battery Technology providing superior pack construction, electronics, and performance that delivers more run-time and increases productivity.
4 Functionally designed body and front grip area that provides best in class ergonomics.
1
2
3
4
5
ICE HARDENED™ HOLE SAWS
6
ICE HARDENED HOLE SAWSSINGLE UNIT (SHRINK WRAPPED)
Part Number Description Size Metric Size Imperial EAN
49569603 Hole Saw 16mm Ice Hardened 16mm 5/8" 4524222237749569604 Hole Saw 18mm Ice Hardened 18mm 11/16" 4524222239149569605 Hole Saw 19mm Ice Hardened 19mm 3/4" 4524219832049560024 Hole Saw 20mm Ice Hardened 20mm 25/32" 4524227101649569606 Hole Saw 21mm Ice Hardened 21mm 13/16" 4524222241449569607 Hole Saw 22mm Ice Hardened 22mm 7/8" 4524219834449569608 Hole Saw 24mm Ice Hardened 24mm 15/16" 4524222242149569609 Hole Saw 25mm Ice Hardened 25mm 1" 4524219835149569610 Hole Saw 27mm Ice Hardened 27mm 1-1/16" 4524222243849569611 Hole Saw 29mm Ice Hardened 29mm 1-1/8" 4524219836849569612 Hole Saw 30mm Ice Hardened 30mm 1-3/16" 4524222244549569613 Hole Saw 32mm Ice Hardened 32mm 1-1/4" 4524219837549569614 Hole Saw 33mm Ice Hardened 33mm 1-5/16" 4524222246949569615 Hole Saw 35mm Ice Hardened 35mm 1-3/8" 4524219838249569616 Hole Saw 37mm Ice Hardened 37mm 1-7/16" 4524222247649569617 Hole Saw 38mm Ice Hardened 38mm 1-1/2" 4524219839949569618 Hole Saw 40mm Ice Hardened 40mm 1-9/16" 4524222248349569619 Hole Saw 41mm Ice Hardened 41mm 1-5/8" 4524219841249569620 Hole Saw 43mm Ice Hardened 43mm 1-11/16" 4524222249049569621 Hole Saw 44mm Ice Hardened 44mm 1-3/4" 4524219842949569622 Hole Saw 46mm Ice Hardened 46mm 1-13/16" 4524222251349569623 Hole Saw 48mm Ice Hardened 48mm 1-7/8" 4524219844349560113 Hole Saw 50mm Ice Hardened 50mm 1-59/64" 4524227102349569624 Hole Saw 51mm Ice Hardened 51mm 2" 4524219845049569625 Hole Saw 52mm Ice Hardened 52mm 2-1/16" 4524222252049569626 Hole Saw 54mm Ice Hardened 54mm 2-1/8" 4524219846749569628 Hole Saw 57mm Ice Hardened 57mm 2-1/4" 4524219847449569629 Hole Saw 59mm Ice Hardened 59mm 2-5/16" 4524222253749569630 Hole Saw 60mm Ice Hardened 60mm 2-3/8" 4524219848149569631 Hole Saw 64mm Ice Hardened 64mm 2-1/2" 4524219849849569632 Hole Saw 65mm Ice Hardened 65mm 2-9/16" 4524222254449569633 Hole Saw 67mm Ice Hardened 67mm 2-5/8" 4524222256849569635 Hole Saw 70mm Ice Hardened 70mm 2-3/4" 4524219851149569636 Hole Saw 73mm Ice Hardened 73mm 2-7/8" 4524222257549569637 Hole Saw 76mm Ice Hardened 76mm 3" 4524219852849569638 Hole Saw 79mm Ice Hardened 79mm 3-1/8" 4524222258249569639 Hole Saw 83mm Ice Hardened 83mm 3-1/4" 4524219854249569640 Hole Saw 86mm Ice Hardened 86mm 3-3/8" 4524222259949569641 Hole Saw 89mm Ice Hardened 89mm 3-1/2" 4524219855949569642 Hole Saw 92mm Ice Hardened 92mm 3-5/8" 4524222261249569643 Hole Saw 95mm Ice Hardened 95mm 3-3/4" 4524222262949569644 Hole Saw 98mm Ice Hardened 98mm 3-7/8" 4524222263649569645 Hole Saw 102mm Ice Hardened 102mm 4" 4524219856649569646 Hole Saw 105mm Ice Hardened 105mm 4-1/8" 4524222264349569647 Hole Saw 108mm Ice Hardened 108mm 4-1/4" 4524219857349569648 Hole Saw 111mm Ice Hardened 111mm 4-3/8" 4524222267449569649 Hole Saw 114mm Ice Hardened 114mm 4-1/2" 4524219858049569650 Hole Saw 121mm Ice Hardened 121mm 4-3/4" 4524222268149569652 Hole Saw 127mm Ice Hardened 127mm 5" 4524219859749569654 Hole Saw 140mm Ice Hardened 140mm 5-1/2" 45242222711
49569656 Hole Saw 152mm Ice Hardened 152mm 6" 45242198627
7
Picture Part Number Description Length Diameter EAN
49568000 Hole Saw Pilot Drill 1/4“ X 4“ suits all arbors 1 1/4 45242200351
49568010 Hole Saw Pilot Drill 1/4” X 3-1/2” suits all arbors 1 1/4 45242200450
49568033 Hole Saw Pilot Drill 1/4” X 3-1/2” PKT 12 suits all arbors 1 1/4 45242156122
Picture Part Number Description Hole Saw Size Range
Works withPilot Bit EAN
49567010 Hole Saw Arbor 3/8 Shkup to30mm
works withall 3
45242200177
49567210 Hole Saw Arbor 3/8“ X 1/2“-20 Twistup to30mm
45242200207
49567055Hole Saw Arbor 7/16“ X 5/8“-18
Quick Change32mm
and over45242225774
49567240Hole Saw Arbor 7/16“ X 5/8“-18
Quick Change32mm
and over45242225804
ICE HARDENED HOLE SAWS BULK PACKS
Part Number Description Size Metric Size Imperial EAN
49565100A Hole Saw 22mm Ice Hardened Bulk (25/pkg - BOX x 4) 22mm 7/8" 4524215637549565110A Hole Saw 25mm Ice Hardened Bulk (25/pkg - BOX x 4) 25mm 1" 4524215638249565130A Hole Saw 32mm Ice Hardened Bulk (25/pkg - BOX x 4) 32mm 1-1/4" 4524215641249565160A Hole Saw 51mm Ice Hardened Bulk (25/pkg - BOX x 4) 51mm 2" 45242176267
ARBORS AND PILOT DRILL BITS
ICE HARDENED HOLE SAWS
8
ICE HARDENED HOLE SAW KITS
Part Number Description EAN
4922400519mm, 22mm, 25mm, 29mm, 38mm, 1 x Twist release arbor, 1 x pilot drill,
1 x adaptor, 1 x spacer45242224777
Part Number Description EAN
4922402519mm, 22mm, 29mm, 35mm, 38mm, 44mm, 51mm, 54mm,
64mm, 2 x arbors, 2 x pilot drill45242224760
Part Number Description EAN
49224185
19mm, 22mm, 25mm, 29mm, 32mm, 35mm, 38mm, 44mm, 51mm, 54mm, 57mm, 64mm, 67mm, 76mm, 83mm,
86mm, 92mm, 95mm, 105mm, 108mm, 114mm, 121mm, 3 x arbors, 3 x pilot drill
45242155033
HOLE SAW KIT 8PCE GENERAL PURPOSE ICE HARDENED
HOLE SAW KIT 13PCE GENERAL PURPOSE ICE HARDENED
HOLE SAW KIT 28PCE GENERAL PURPOSE ICE HARDENEDED
D
9
Part Number Description EAN
49224105
19mm, 22mm, 29mm, 35mm, 38mm, 44mm, 51mm, 57mm, 64mm, 67mm, 76mm, 92mm, 105mm, 121mm, 2 x arbors,
3 x pilot drill, 1 x adaptor, 1 x spacer
45242154975
Part Number Description EAN
4922414519mm, 22mm, 29mm, 38mm,
44mm, 57mm, 2 x arbor, 2 x pilot drill, 1 x spacer, 1 x adaptor
45242154982
Part Number Description EAN
49224155
19mm, 22mm, 29mm, 35mm, 38mm, 44mm, 57mm, 67mm, 76mm, 89mm, 102mm, 108mm, 114mm, 2 x arbors, 3 x pilot drill, 1 x adaptor, 1 x spacer
45242154999
HOLE SAW KIT 19PCE ELECTRICIANS ICE HARDENED
HOLE SAW KIT 10PCE PLUMBERS ICE HARDENED
HOLE SAW KIT 18PCE PLUMBERS ICE HARDENED
ICE HARDENED HOLE SAW KITSICE
HARDENED HOLE SAWS
10
M18 FUELTM 125mm (5”) GRINDER
1 Corded durability utilising the same metal housing, gearing system, guards, flanges, and anti-vibration side handle as legendary high performance corded grinders.
2 Using Milwaukee’s patented POWERSTATE™ Brushless Motor is the world’s first grinder with performance you would expect from a corded grinder.
3 REDLINK PLUS™ Intelligence electronics providing optimised performance, electronic clutch, and overload protection using total system communication between tool, battery and charger.
4 Powered by Extended Capacity REDLITHIUM™ Battery Technology providing superior pack construction, electronics, and performance that delivers more run-time and increases productivity.
1
2
3
4
6
11
CARBIDE DRILLING AND DEMOLITION
12
A
B
Ø
SDS PLUS DRILL BITS – 2 CUTMAXIMUM DRILLING SPEED: The dynamic, chisel-shaped drill head ensures swift penetration and optimal material removal.MAXIMUM DURABILITY: The toughest carbide tip in optimised design held by high strength brazing offers an unrivalled durability even in steel reinforced concrete.MINIMUM VIBRATION: The unique 2-flute design reduces vibrations and transfers the energy directly to the bit tip.
Part Number Description Diameter (mm) Ø Total Length (mm) A
Working Length (mm) B EAN
4932339498 SDS Plus 4 x 110mm 4 110 50 40023953045614932307067 SDS Plus 5 x 110mm 5 110 50 40023953088354932399315 SDS Plus 5 x 160mm 5 160 100 40023953594314932399316 SDS Plus 5 x 210mm 5 210 150 40023953594484932339499 SDS Plus 5.5 x 110mm 5.5 110 50 40023953045784932340408 SDS Plus 5.5 x 160mm 5.5 160 100 40023953113104932307068 SDS Plus 6 x 110mm 6 110 50 40023953088424932307069 SDS Plus 6 x 160mm 6 160 100 40023953088594932373136 SDS Plus 6 x 210mm 6 210 150 40023953463944932353819 SDS Plus 6 x 260mm 6 260 200 40023953201274932344292 SDS Plus 6.5 x 110mm 6.5 110 50 40023953122764932344293 SDS Plus 6.5 x 160mm 6.5 160 100 40023953122694932399147 SDS Plus 6.5 x 210mm 6.5 210 150 40023953575744932399148 SDS Plus 6.5 x 260mm 6.5 260 200 40023953575814932307070 SDS Plus 8 x 110mm 8 110 50 40023953088664932307071 SDS Plus 8 x 160mm 8 160 100 40023953088734932307072 SDS Plus 8 x 210mm 8 210 150 40023953088804932353821 SDS Plus 8 x 260mm 8 260 200 40023953201414932340410 SDS Plus 10 x 110mm 10 110 50 40023953119344932307073 SDS Plus 10 x 160mm 10 160 100 40023953088974932307074 SDS Plus10 x 210mm 10 210 150 40023953089034932344295 SDS Plus 10 x 260mm 10 260 200 40023953122524932353824 SDS Plus 10 x 310mm 10 310 250 40023953201724932307075 SDS Plus 12 x 160mm 12 160 100 40023953089104932307076 SDS Plus 12 x 210mm 12 210 150 40023953089274932344297 SDS Plus 12 x 260mm 12 260 200 40023953122384932307077 SDS Plus 12 x 450mm 12 450 400 40023953089344932307946 SDS Plus 13 x 160mm 13 160 100 40023953090544932344298 SDS Plus 13 x 260mm 13 260 200 40023953122214932307078 SDS Plus 14 x 160mm 14 160 100 40023953089414932353826 SDS Plus 14 x 210mm 14 210 150 40023953201964932307079 SDS Plus 14 x 260mm 14 260 200 40023953089584932399330 SDS Plus 14 x 310mm 14 310 250 40023953595854932307088 SDS Plus 14 x 450mm 14 450 400 40023953090474932373910 SDS Plus 15 x 160mm 15 160 100 40023953533924932344300 SDS Plus 15 x 260mm 15 260 200 40023953122074932307080 SDS Plus 16 x 160mm 16 160 100 40023953089654932307081 SDS Plus 16 x 210mm 16 210 150 40023953089724932344301 SDS Plus 16 x 310mm 16 310 250 40023953121914932307082 SDS Plus 16 x 450mm 16 450 400 40023953089894932344303 SDS Plus 18 x 200mm 18 200 150 40023953121774932344304 SDS Plus 18 x 300mm 18 300 250 40023953121604932340411 SDS Plus 18 x 450mm 18 450 400 49923953119414932344305 SDS Plus 20 x 200mm 20 200 150 40023953121534932399027 SDS Plus 20 x 300mm 20 300 250 40023953561264932307085 SDS Plus 20 x 450mm 20 450 400 40023953090164932373911 SDS Plus 22 x 250mm 22 250 200 40023953534084932344307 SDS Plus 22 x 450mm 22 450 400 40023953121394932373922 SDS Plus 24 x 250mm 24 250 200 40023953535214932307087 SDS Plus 24 x 450mm 24 450 400 40023953090304932344308 SDS Plus 25 x 250mm 25 250 200 40023953121224932344309 SDS Plus 25 x 450mm 25 450 400 40023953121154932344311 SDS Plus 26 x 450mm 26 450 400 4002395312092
*Made in Germany
13
B
A
Ø
Part Number Description Diameter (mm) Ø Total Length (mm) A
Working Length (mm) B EAN
4932352008 SDS Plus 4 CUT 5 x 160mm 5 160 100 40023953688914932352009 SDS Plus 4 CUT 5.5 x 110mm 5.5 110 50 40023953689074932352010 SDS Plus 4 CUT 5.5 x 160mm 5.5 160 100 40023953689144932352011 SDS Plus 4 CUT 6 x 110mm 6 110 50 40023953689214932352012 SDS Plus 4 CUT 6 x 160mm 6 160 100 40023953689384932352013 SDS Plus 4 CUT 6 x 210mm 6 210 150 40023953667054932430146 SDS Plus 4 CUT 6.5 x 160mm 6.5 160 100 40023953779614932352016 SDS Plus 4 CUT 6.5 x 210mm 6.5 210 150 40023953667364932352021 SDS Plus 4 CUT 8 x 110mm 8 110 50 40023953667814932352022 SDS Plus 4 CUT 8 x 160mm 8 160 100 40023953667984932352023 SDS Plus 4 CUT 8 x 210mm 8 210 150 40023953668044932352024 SDS Plus 4 CUT 8 x 260mm 8 260 200 40023953668114932352025 SDS Plus 4 CUT 10 x 110mm 10 110 50 40023953668284932352026 SDS Plus 4 CUT 10 x 160mm 10 160 100 40023953668354932352027 SDS Plus 4 CUT 10 x 210mm 10 210 150 40023953668424932352028 SDS Plus 4 CUT 10 x 260mm 10 260 200 40023953668594932352029 SDS Plus 4 CUT 10 x 310mm 10 310 250 40023953668664932352031 SDS Plus 4 CUT 12 x 160mm 12 160 100 40023953668804932352032 SDS Plus 4 CUT 12 x 210mm 12 210 150 40023953668974932352033 SDS Plus 4 CUT 12 x 260mm 12 260 200 40023953669034932352035 SDS Plus 4 CUT 12 x 450mm 12 450 400 40023953669274932352036 SDS Plus 4 CUT 14 x 160mm 14 160 100 40023953669344932352037 SDS Plus 4 CUT 14 x 210mm 14 210 150 40023953669414932352949 SDS Plus 4 CUT 14 x 260mm 14 260 200 40023953760704932352038 SDS Plus 4 CUT 14 x 310mm 14 310 250 40023953669584932352039 SDS Plus 4 CUT 14 x 450mm 14 450 400 40023953669654932430138 SDS Plus 4 CUT 15 x 210mm 15 210 150 40023953779924932352952 SDS Plus 4 CUT 15 x 260mm 15 260 200 40023953761004932430139 SDS Plus 4 CUT 16 x 160mm 16 160 100 40023953780054932352953 SDS Plus 4 CUT 16 x 210mm 16 210 150 40023953761174932352954 SDS Plus 4 CUT 16 x 310mm 16 310 250 40023953761244932352820 SDS Plus 4 CUT 16 x 450mm 16 450 400 40023953747864932356502 SDS Plus 4 CUT 18 x 250mm 18 250 200 40023953209504932356503 SDS Plus 4 CUT 18 x 450mm 18 450 400 40023953209674932356504 SDS Plus 4 CUT 20 x 250mm 20 250 200 40023953209744932356505 SDS Plus 4 CUT 20 x 450mm 20 450 400 40023953209814932399332 SDS Plus 4 CUT 22 x 250mm 22 250 200 40023953596084932356506 SDS Plus 4 CUT 22 x 450mm 22 450 400 40023953209984932356507 SDS Plus 4 CUT 24 x 250mm 24 250 200 40023953210014932356508 SDS Plus 4 CUT 24 x 450mm 24 450 400 40023953210184932399333 SDS Plus 4 CUT 25 x 250mm 25 250 200 40023953596154932356509 SDS Plus 4 CUT 25 x 450mm 25 450 400 40023953210254932356510 SDS Plus 4 CUT 28 x 450mm 28 450 400 40023953210324932356511 SDS Plus 4 CUT 30 x 450mm 30 450 400 40023953210494932399336 SDS Plus 4 CUT 32 x 450mm 32 450 400 4002395359646
SDS-PLUS – 4 CUT Embedded solid one Pce carbide with centering tip for easy spot drilling and long life time.Four symmetrical 90° cutting edges guarantee perfect round holes for anchor fixing as well as reduce the risk of the drill bit jamming when hitting rebar. The high volume flute geometry ensures optimum dust removal. 4 spiral flute design provides lowest vibration and low uniform flute wear. Suitable for brick, concrete, reinforced concrete and natural stone.
*Made in Germany
SDSDRILLBITS
14
A
B
SDS PLUS FLAT CHISEL
Part Number Description Total Length (mm) -A-
Working Width (mm) -B- EAN
4932339626 SDS Plus Flat Chisel 20 x 250mm 250 20 4002395304820
A
B
SDS PLUS ANGLE CHISEL
Part Number Description Total Length (mm) -A-
Working Width (mm) -B- EAN
4932353424 SDS Plus Angle Chisel 250 40 4002395320202
A
B
SDS PLUS WIDE CHISEL
Part Number Description Total Length (mm) -A-
Working Width (mm) -B- EAN
4932367146 SDS Plus Flat Wide Chisel 250 40 4002395334377
SDS PLUS POINTED CHISEL
Part Number Description Total Length (mm) -A- EAN
4932339625 SDS Plus Pointed Chisel 250 4002395304813
A
B
15
DRILLING AND DEMOLITION BREAKERS
ROCK SOLIDPERFORMANCE
16
90°
SDS-MAX / 21 mm K-HEX – 4 CUT DRILL BITS
Large carbide tip with patented rebar chambers.Ensures lower vibration and optimised drilling performance when hitting reinforced steel. Longer life time.
Shorter spiral windings.For faster transport of drilling dust from the head to the flute = Less wear and heat build up at the tip.
Especially developed robust head geometry with optimum 4 x 90° symmetry of carbide tip.Reduces jamming up on hitting reinforcing steel.
Big, robust secondary cutter with dynamic, curved cutting edge.Supports the primary cutter for faster drilling.
Centering point with 130° point angle. Easy spot drilling with pinpoint accuracy and ensures optimum guidance during drilling.
LOW VIBRATION DRILLING PERFORMANCE.Comfortable drilling ensures less stress for man and machine.
SPECIAL SURFACE TREATMENT. Shot blasting provides a smooth surface. Densifies the surface structure and makes the bit more wear resistant.
PGM CONFORMITY.Guarantees precise holes for anchor fitting over the entire life time of the drill bit.
Innovative, unique carbide tip. With more carbide on all diameters and extra carbide on Ø > 32 mm.
OLD NEW
Wear mark on both sides of primary cutter.Guarantees diameter accuracy i.e. for anchor fittings. Life time indicator in warranty cases.
Patented reinforced flute geometry. Lower vibrations for smoother drilling.Stronger flute means less breakages.Better transfer of hammer energy to the tip.
Deep flute shoulders.High volume dust removal for optimum drilling speed, less wear and heat build up.
17
B
A
A
B
A
B
A
B
A
B
SDS MAX FLAT CHISEL Ideal for a wide range of breaking and cutting of concrete as well as demolition work.
SDS MAX POINTED CHISEL Ideal for a wide range of breaking and demolition work.
SDS MAX WIDE CHISELStripping walls of plaster, or lifting ceramic tiles, as well as removing heavy deposits of rust and scale metal.
Part Number Description Total Length (mm) -A- EAN
4932343734 SDS Max Pointed Chisel 280mm 280 40023953175094932343735 SDS Max Pointed Chisel 400mm 400 40023953175164932343736 SDS Max Pointed Chisel 600mm 600 4002395317523
Part Number Description Total Length (mm) -A-
Working Width (mm) -B- EAN
4932343737 SDS Max Flat Chisel 280 x 25mm 280 25 40023953175304932343738 SDS Max Flat Chisel 400 x 25mm 400 25 40023953175474932343739 SDS Max Flat Chisel 600 x 25mm 600 25 4002395317554
Part Number Description Total Length (mm) -A-
Working Width (mm) -B- EAN
4932343743 SDS Max Wide Chisel 400 x 50mm 400 50 4002395317592
SDSDRILLBITS
18
A
B
Ø
SDS MAX DRILL BITS – 2 CUT
Part Number Description Diameter (mm) -Ø- Total Length (mm) -A-
Working Width (mm) -B- EAN
4932352750 SDS Max 2 Cut 12 x 340mm 12 340 200 40023953740834932352751 SDS Max 2 Cut 12 x 540mm 12 540 400 40023953740904932430132 SDS Max 2 Cut 12 x 690mm 12 690 550 40023953779304932352752 SDS Max 2 Cut 14 x 340mm 14 340 200 40023953741064932352753 SDS Max 2 Cut 14 x 540mm 14 540 400 4002395374113
Part Number Description Diameter (mm) -Ø- Total Length (mm) -A-
Working Width (mm) -B- EAN
4932352756 SDS Max 4 Cut 16 x 340mm 16 340 200 40023953741444932352757 SDS Max 4 Cut 16 x 540mm 16 540 400 40023953741514932352760 SDS Max 4 Cut 18 x 340mm 18 340 200 40023953741824932352761 SDS Max 4 Cut 18 x 540mm 18 540 400 40023953741994932352764 SDS Max 4 Cut 20 x 320mm 20 320 200 40023953742294932352765 SDS Max 4 Cut 20 x 520mm 20 520 400 40023953742364932352768 SDS Max 4 Cut 22 x 320mm 22 320 200 40023953742674932352769 SDS Max 4 Cut 22 x 520mm 22 520 400 40023953742744932352772 SDS Max 4 Cut 24 x 320mm 24 320 200 40023953743044932352773 SDS Max 4 Cut 24 x 520mm 24 520 400 40023953743114932352774 SDS Max 4 Cut 25 x 320mm 25 320 200 40023953743284932352775 SDS Max 4 Cut 25 x 520mm 25 520 400 40023953743354932352778 SDS Max 4 Cut 28 x 370mm 28 370 250 40023953743664932352779 SDS Max 4 Cut 28 x 570mm 28 570 450 40023953743734932352783 SDS Max 4 Cut 30 x 370mm 30 370 250 40023953744104932352784 SDS Max 4 Cut 30 x 570mm 30 570 450 40023953744274932352785 SDS Max 4 Cut 32 x 370mm 32 370 250 40023953744344932352786 SDS Max 4 Cut 32 x 570mm 32 570 450 40023953744414932352790 SDS Max 4 Cut 35 x 570mm 35 370 250 40023953744894932352792 SDS Max 4 Cut 38 x 370mm 38 370 250 40023953745024932352793 SDS Max 4 Cut 38 x 570mm 38 570 450 40023953745194932352794 SDS Max 4 Cut 40 x 370mm 40 370 250 40023953745264932352795 SDS Max 4 Cut 40 x 570mm 40 570 450 4002395374533
A
B
Ø
SDS MAX DRILL BITS – 4 CUT
19
A
B
Ø
Part Number Description Diameter (mm) -Ø- Total Length (mm) -A-
Working Width (mm) -B- EAN
4932399562 21mm K-Hex Bit 18 x 570mm 18 570 400 40023953557854932399564 21mm K-Hex Bit 20 x 570mm 20 570 400 40023953558084932399566 21mm K-Hex Bit 22 x 570mm 22 570 400 40023953558224932399569 21mm K-Hex Bit 25 x 570mm 25 570 400 40023953632164932399571 21mm K-Hex Bit 28 x 570mm 28 570 400 40023953622574932399572 21mm K-Hex Bit 30 x 570mm 30 570 400 93221912347834932399573 21mm K-Hex Bit 32 x 570mm 32 570 400 4002395355921
21MM K-HEXAGON DRILL BITS – 4 CUTEASY CENTERING: The special shaped tip design ensures accurate positioning and avoids skating on hard
and smooth materials.
OPTIMAL DUST REMOVAL: The large entrance channels remove the dust quickly from the hole for less wear rate on the tip resulting higher performance and longer life time.
PRECISE ROUND HOLES: Due to two extra carbide tips the drill bit will produce precise round holes and has also a excellent performance when hitting rebar.
HIGH ENERGY TRANSFER: The patented KVS-flute design gives the best energy transfer from the tool reception to the drill bit tip and also lowest vibration.
*Made in Germany.
SDSDRILLBITS
20
A
21mm K-HEXAGON POINTED CHISEL Ideal for a wide range of breaking and demolition work.
Part Number Description Total Length (mm) -A- EAN
4932399250 21mm Hex Pointed Chisel 300mm 300 40023953561574932399251 21mm Hex Point Chisel 380mm 380 40023953586324932399252 21mm Hex Point Mortar Chisel 450mm 450 40023953586494932399253 21mm Hex Point Chisel 600mm 600 4002395358656
A
B
21mm K-HEXAGON FLAT CHISEL Ideal for a wide range of breaking and cutting of concrete as well as demolition work.
Part Number Description Total Length (mm) -A-
Working Width (mm) -B- EAN
4932399256 21mm Hex Chisel 25 x 380mm 380 25 40023953586874932399257 21mm Hex Chisel 25 x 450mm 450 25 40023953586944932399258 21mm Hex Chisel 25 x 600mm 600 25 4002395358700
A
B
21mm K-HEXAGON WIDE CHISELSuitable for stripping walls or plaster, or lifting ceramic tiles, as well as removing deposits of rust and scale from metal.
Part Number Description Total Length (mm) -A-
Working Width (mm) -B- EAN
4932399260 21mm Hex Chisel Wide 50 x 300mm 300 50 40023953587244932399261 21mm Hex Wide Chisel 75 x 300mm 300 75 4002395358731
21
Ø
A
A
B
21mm K-HEXAGON SPADE Suitable for digging in all types of ground – clay, earth, chalk, shingle and shale. Also for digging in frozen ground. Not suitable for concrete.
21mm K-HEXAGON ELECTRODE / GROUND ROD DRIVERS Suitable for driving hammering electrode / ground rods. Not suitable for driving rebar or steel rods.
Part Number Description Total Length (mm) -A-
Working Width (mm) -B- EAN
4932399264 21mm Hex Spade Chisel 533 110 4002395358762
Part Number Description Diameter (mm) -Ø- Total Length (mm) -A- EAN
4932399265 21mm Hex Electrode Driver 12mm 12 222 40023953587794932399266 21mm Hex Electrode Driver 16mm 16 222 4002395358786
SDSDRILLBITS
22
A A
-Ø- B
A
SURFACE TREATMENT TOOLSAPPLICATION: For roughing up concrete before its surface coated ie. for pitted or uneven floors or walls must often be rough ened prior to covering with a new layer of coa-ting. Requires universal taper shank.
UNIVERSAL TAPER SHANKS
FLOOR CLEANING TOOLSAPPLICATION: For scraping floor tile adhesive, paint, scree and other floor coatings. Requires universal taper shank.
TAMPING TOOLSAPPLICATION: Suitable for compacting earth and bal-last prior to pouring concrete. Tamping back-fill on ditches. Requires universal taper shank.
21 mm K-HEX / SDS-MAX SPECIAL APPLICATION TOOLS
Part Number Description Diameter (mm) -Ø-
Total Length (mm) -A-
Working Length (mm) -B- EAN
4932399270 Tamping Tool 120 x 120mm 120 120 4002395358823
Part Number Description Total Length (mm) -A-
Total Width (mm) -B-
Thickness (mm) -C- EAN
4932399272 21mm Hex Floor Tool 180 x 150 x 1.5mm 180 150 1.5 4002395358847
Part Number Description Diameter (mm) -Ø- Total Length (mm) -A- EAN
4932343771 Tamping Stem 300mm SDS Max SDS MAX 300 40023953177454932399281 Tamping Stem 450mm x 21mm K-HEX K-HEX 300 4002395358939
A C
B
23
Picture Part Number Description EAN
4932359490 Adaptor SDS Max - SDS Plus 4002395325795
4932367166 SDS Plus Adaptor 1/2“ - 20UNF with screw 4002395334438
4932367438 SDS Plus Adaptor 1/2“ - 20UNF 1/4" Bit 4002395337668
4932379877 Adaptor FIXTEC - SDS Plus 4002395346561
8971606168 SDS Plus Adator 3/8" - 20UNF 9322191025879
SDS ADAPTORS
SDSDRILLBITS
24
M18 FUELTM 165mm (6 1/2”) CIRCULAR SAW
1 Integrated LED Light for clear visibility and a rafter hook for easy storage on the job.
2 Patented POWERSTATE™ brushless motor provides cutting power that you would previously expect a corded tool to perform.
3 REDLINK PLUS™ intelligence ensures optimised performance and protection from overloading, overheating, and over-discharging.
4 Powered by Extended Capacity REDLITHIUM™ Battery Technology providing superior pack construction, electronics, and performance that delivers more run-time and increases productivity.
1
2
3
4
25
THUNDERBOLT / THUNDERWEBMetal drill bits HSS Ground - DIN 338
FLUTE GEOMETRY• Thunderweb flute form ejects hot chips rapidly. Dissipates heat better increasing life time.• Open flute form reduces drill drawback when drilling deeper holes.• Sharpened edges reduce binding for faster cleaner cuts.• Flatter twist angle creates smaller chippings, ideal for drilling harder
steels ie. stainless steel.
The Thunderweb design is characterised by a conical shaped web which gets thicker towards the back of the drill bit.
STANDARD DRILL BITTHUNDERWEB DRILL BIT
The web on standard drill bits is a constant thickness throughout the length of the bit.
CONVENTIONAL TYPE WEB CROSS SECTION
PARABOLIC WEB CROSS SECTION
• Accepts higher feed pressure and torque.• Less breakages. • Long life.
Vs
26
Part Number Description EAN
49323524691mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm,
5.5mm, 6mm, 6.5mm, 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 9.5mm, 10mm, 10.5mm, 11mm, 11.5mm, 12mm, 12.5mm, 13mm
4002395371280
Part Number Description EAN
49323523761mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm,
5.5mm, 6mm, 6.5mm, 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 9.5mm,10mm, 10.5mm, 11mm, 11.5mm, 12mm, 12.5mm, 13mm
4002395370351
Part Number Description EAN
49323524681mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm,
5.5mm, 6mm, 6.5mm, 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 9.5mm, 10mm4002395371273
THUNDERWEB HSS-G 25 Pce DRILL BIT SET
HSS 19 Pce DRILL BIT SET
HSS 25 Pce DRILL BIT SET
27
Part Number Description EAN
418900131mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.2mm,
4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm, 6.8mm, 7mm, 7.5mm, 8mm,8.5mm, 9mm, 9.5mm, 10mm, 10.5mm, 11mm, 11.5mm, 12mm, 12.5mm, 13mm
4892210113887
Part Number Description EAN
418928031mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.2mm,
4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm, 6.8mm, 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 9.5mm, 10mm, 10.5mm, 11mm, 11.5mm, 12mm, 12.5mm, 13mm
9322191305759
THUNDERBOLT TITANIUM 29 Pce
THUNDERBOLT BLACK OXIDE 29 SET
DRILLSETS
28
THUNDERBOLT TITANIUM 14 Pce DRILL BIT SET
THUNDERBOLT BLACK OXIDE 14 Pce DRILL BIT SET
Part Number Description EAN
48890011 IMP 1/6", 5/64", 3/32", 7/64", 1/8"(2), 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 1/2" 45242186860
Part Number Description EAN
48892800 IMP 1/6", 5/64", 3/32", 7/64", 1/8"(2), 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 1/2" 45242167227
29
PROBLEM SOLUTION
milwaukeetools.com.au/job-site-solutions/overview
Milwaukee Power Tools
has launched a new
initiative in the Australian
power tool market,
offering the first devoted
Job Site Solutions team.
Milwaukee’s experienced team visit your work site - be it
commercial, industrial, mining or oil and gas infrastructure
to conduct a thorough review into how your workers are
using their tools and what applications and obstacles they
face on a daily basis.
From this assessment, Milwaukee provides solutions to
your power tool inventory management, both by increasing
productivity with new application solutions and substantially
reducing your costs via streamlining and consolidating your
cordless tool platforms.
For more information, and to register, please visit our website :
30
CHUCKS
Chuck Jaws Open mm
Reception IndustrialLocking Device
Safety Screw
Rotary Drill
Percussion Drill
Battery Drill
QuantityChuck
Key
1.0 - 10 1/2" x 20 • • • • • 1 A
1.5 - 13 1/2" x 20 • • • • 1 A
1.5 - 13 1/2" x 20 • • • • • 1 A
3.0 - 16 M18 x 2.5 • • • • • 1 C
5.0 - 20 Taper B 22 • • 1
GEARED CHUCKS (KEYED CHUCKS)
Chuck Jaws Open mm
ReceptionMilwaukeeMachine
SafetyScrew
QuantityPart
NumberEAN Code Description
1.5 - 13 1/2" x 20 C18PD 1 670752001 9322191306510KEYLESS CHUCK METAL
1.5mm-13mm - C18PD
1.5 - 10 3/8" x 24 C12DD 1 670753001 9322191278893KEYLESS CHUCK METAL
1.5mm-10mm - C12DD
1.5 - 13 1/2" x 20 HD18PD/DD 1 690087008 4002395825196KEYLESS CHUCK METAL 1.5-13mm - HD18PD/DD
1.5 - 13 1/2" x 20 V18DD • 1 48661575 9322191019342 V18DD 13MM Keyless Chuck-Milw
REPLACEMENT MILWAUKEE CHUCKS
0.5 - 6.5 Hex 1/4" • 1
GEARED CHUCKS (KEYED CHUCKS WITH 1/4" HEX RECEPTION)
1.0 - 10 3/8" x 24 • • • 1 NA
1.5 - 13 1/2" x 20 • • • • 1 NA
1.5 - 13 1/2" x 20 • • • • • 1 NA
1.5 - 13 1/2" x 20 • • • • • 1 NA
1.5 - 13 1/2" x 20 • • • • • • 1 NA
KEYLESS CHUCKS
1.0 - 10 1/2" x 20 • • • • • 1 NA
1.5 - 13 1/2" x 20 • • • • • • 1 NA
KEYLESS CHUCKS FOR FIXTEC (SPINDLE LOCK) MACHINES
1.0 - 13 1/2" x 20 • • • • • 1 NA
INDUSTRIAL KEYLESS CHUCKS FOR PERCUSION DRILLS
31
Part Number EAN Code Description
4932269401 4002395302932 GEARED CHUCK METAL & KEY 1mm-10mm
4932218111 4002395300051 GEARED CHUCK METAL & KEY 1.5mm-13mm
4932267980 4002395300488 GEARED CHUCK METAL & KEY 1.5mm-13mm
4932320014 4002395310784 GEARED CHUCK METAL & KEY 1mm-16mm B16 Taper
4932117031 4002395305827 GEARED CHUCK METAL & KEY 5mm-20mm B20 Taper
CHUCK KEYS AND ASSEMBLY
4932314867 4002395300112 GEARED CHUCK METAL .5mm-6.6mm HEX ADAP
4932349457 4002395318155 KEYLESS CHUCK METAL 1mm-10mm
4932376531 4002395346332 KEYLESS CHUCK METAL 1.5mm-13mm
4932364265 4002395334056 KEYLESS CHUCK METAL 1.5mm-13mm
4932376533 4002395346349 KEYLESS CHUCK METAL SCREW 1.5mm-13mm
4932364267 4002395334070 KEYLESS CHUCK METAL SCREW 1.5mm-13mm
4932372443 4002395345458 KEYLESS CHUCK METAL 1mm-10mm
4932371913 4002395345366 KEYLESS CHUCK METAL 1/2" x 20UNF 1.5mm-13mm
4932372443 4002395345458 KEYLESS CHUCK METAL 1mm-10mm
Quantity Part Number EAN Code Description
1 4932221379 4002395306381 CHUCK KEY S3
1 4932221378 4002395302765 CHUCK KEY S2A
1 48662125 45242157334 DRILL CHUCK ARBOR ASSY 1/2"
DRILLSETS
32
M18 FUEL™ 1/2” Impact Wrench
1 Delivers an impressive 280Nm of torque, and 3,100lpm in a compact design
2 The Milwaukee® POWERSTATETM Brushless Motor provides increased efficiency, lasts longer and delivers maximum power
3 REDLINK PLUSTM Electronic Intelligence allows the operator to choose between 3 fastening modes
4 Powered by Milwaukee® REDLITHIUM-IONTM extended capacity batteries
5 Milwaukee’s proprietary DRIVE CONTROLTM allows 3 torque settings - precision/prevention/performance
6 LED Light
1
2
3
4
5
6
33
SPECIALITY WOOD DRILLING
34
SPEED• Dual cutting edges for fast and aggressive cutting• Tapered design for less friction and reduced chip clogging• Polished powder coated flute design for increased chip ejection, reduced chip clogging and higher Self Feeding capability• Feed screw with coarse thread increases Self Feeding
LIFE TIME• Robust bit design• Self Feeding capability requires less drilling effort• Tapered design for drilling without jamming even in hard materials – results in less breakages
MATERIAL VERSATILITY• Feed screw with coarse thread drills through soft and hard materials with ease
SYSTEM SOLUTION• Fits directly into ¼˝ Hex cordless tool reception (not designed for use with impact drivers)• Accepts standard extension
RANGE AVAILABLE13mm (Overall Length:150mm) - 4813004816mm (Overall Length:150mm) - 4813005819mm (Overall Length:150mm) - 4813006822mm (Overall Length:150mm) - 4813007825mm (Overall Length:150mm) - 48130088
Tapered design
SPEED FEED WOOD BITS
DUAL CUTTING EDGES
TAPERED DESIGN
35
Part Number Description EAN
48251002 Self Feed Bits 25mm 4524211902848251122 Self Feed Bits 29mm 4524211907348251252 Self Feed Bits 32mm 45242119127
Part Number Description EAN
48130400 Speed Feed 4Pce Kit (13mm, 16mm, 19mm, 25mm) 45242234448
SPEED FEED BITS 1/4"
SPEED FEED KITS 1/4" FITMENT
STANDARD SELF FEED BITS 7/16" FITMENT
CLEAN HOLES• Double wing spurs for clean hole cutting
FAST CHIP REMOVAL• Coated fl utes for fast chip removal
FAST DRILLING• Aggresive feed screw design allows the bit to pull through
CLEAN HOLES• Alloy steel kerf cutters provide clean holes
RESHARPENABLE• Cutting edge can be resharpened
DRILLSETS
Part Number Description EAN
48130048 Speed Feed Bit 13 x 150mm 4524222480748130058 Speed Feed Bit 16 x 150mm 4524222481448130068 Speed Feed Bit 19 x 150mm 4524222482148130078 Speed Feed Bit 22 x 150mm 4524222483848130088 Speed Feed Bit 25 x 150mm 45242224845
36
ADAPTOR
AUGER BITS
SHIP AUGER BITS 7/16" FITMENT
FLAT BORING BIT KIT 1/4“ HEX FITMENT
Part Number Description EAN
48660061 1/2" SQ DR-7/16" Hex Adapter 45242155118
Part Number Description EAN
49220175Flat Boring Set
(10mm,12mm,16mm,19mm,22mm,25mm,28mm, 150mm Quik Lok ext)
045242180035
Part Number Description EAN
4932363690 Wood Auger 12 x 460mm 40023953317344932363692 Wood Auger 16 x 460mm 4002395331758
Part Number Description EAN
48130373 Ship Auger Bit 10 x 150mm 04524222574348130623 Ship Auger Bit 16 x 150mm 04524222576748130683 Ship Auger Bit 18 x 150mm 04524209137948130753 Ship Auger Bit 19 x 150mm 04524209143048130813 Ship Auger Bit 21 x 150mm 04524209152248130933 Ship Auger Bit 24 x 150mm 04524209170648131003 Ship Auger Bit 25 x 150mm 04524209178248131063 Ship Auger Bit 27 x 150mm 04524209185048131123 Ship Auger Bit 29 x 150mm 04524209193548131253 Ship Auger Bit 32 x 150mm 04524209203148131373 Ship Auger Bit 35 x 150mm 04524209213048131503 Ship Auger Bit 38 x 150mm 045242092239
48135560 Ship Auger Bit 14 x 460mm 04524209250548135620 Ship Auger Bit 16 x 460mm 04524209255048135680 Ship Auger Bit 18 x 460mm 04524209260448135750 Ship Auger Bit 19 x 460mm 04524209265948135810 Ship Auger Bit 21 x 460mm 04524209270348135870 Ship Auger Bit 22 x 460mm 04524209275848135930 Ship Auger Bit 24 x 460mm 04524209280248136000 Ship Auger Bit 25 x 460mm 04524209285748136010 Ship Auger Bit 27 x 460mm 04524209290148136120 Ship Auger Bit 29 x 460mm 04524209295648136250 Ship Auger Bit 32 x 460mm 04524209300748136370 Ship Auger Bit 35 x 460mm 04524209305248136500 Ship Auger Bit 38 x 460mm 045242093106
37
Part Number Description EAN
48281000 Quik Lok Extension 75mm x 1/4" hex 04524212262248281010 Quik Lok Extension 150mm x 1/4" hex 04524212263948281020 Quik Lok Extension 300mm x 1/4" hex 045242122646
48281030 Quik Lok Extension 140mm x 7/16" hex 04524212265348281040 Quik Lok Extension 300mm x 7/16" hex 04524212266048281050 Quik Lok Extension 450mm x 7/16" hex 04524212267748281060 Quik Lok Extension 600mm x 7/16" hex 045242122684
Part Number Description EAN
49225100SwitchBlade™ Self Feed Bits - 35mm, 38mm, 54mm & 65mm,
140mm QUIK-LOK® Extension bit, Replacement blades, 4 x Feed screws, 4 x set screws, 1 x Hex wrench, Hard case with bulk storage compartment
45242157686
Part Number Description EAN
48255120 SwitchBlade™ 35mm Self Feed Bit 4524215747148255125 SwitchBlade™ 38mm Self Feed Bit 4524215748848255135 SwitchBlade™ 51mm Self Feed Bit 4524215749548255140 SwitchBlade™ 54mm Self Feed Bit 4524215752548255143 SwitchBlade™ 57mm Self Feed Bit 4524222590348255150 SwitchBlade™ 65mm Self Feed Bit 4524215753248255420 SwitchBlade™ 35mm Replacement Blade 4524222584248255425 SwitchBlade™ 38mm Replacement Blade 4524000585948255435 SwitchBlade™ 51mm Replacement Blade 4524222586648255440 SwitchBlade™ 54mm Replacement Blade 4524222587348255443 SwitchBlade™ 57mm Replacement Blade 4524222588048255450 SwitchBlade™ 65mm Replacement Blade 45242226474
SWITCHBLADE™ SELF FEED BITS 7/16" FITMENT
SWITCHBLADE™ 5 PCE KIT
BIT EXTENSIONS
LONG LIFE• Cutting edge is replaceable, made with hardened steel to increase bit life
FAST DRILLING• Aggresive feed screw design allows the bit to pull through the wood faster
EASY SIZE REFERENCE• Bit and Blades are engraved for quick and easy size identifi cation
1/4" FITMENT
7/16" FITMENT
LAD
DRILLSETS
38
M12 FUEL™ 1/4” Hex Impact Driver
1 POWERSTATE™ Brushless Motor. Milwaukee® Designed and Built Brushless Motor
2 RedLink Plus™ Intelligence Milwaukee’s Advanced Electronic System for Maximum Performance - 2 Mode DRIVE CONTROL™
3 RedLithium™ Battery Technology. Superior Pack Construction, Electronics, and Performance Deliver More Work per Charge and More Work Over Pack Life
4 One-Handed Bit Insertion. Allows for Fast and Easy Bit Changes
5 Built-in LED Light. Illuminates Work Surface
12
4
5
3
39
SHOCKWAVE™
40
SHOCKWAVE™ PHILLIPS INSERT BITS
SHOCKWAVE™ SQUARE INSERT BITS
SHOCKWAVE™ TORX INSERT BITS
SHOCKWAVE™ BIT HOLDERS
Part Number Description EAN
48324411 SHOCKWAVE™ #1 Phillips Qty 2 4524219542848324412 SHOCKWAVE™ #2 Phillips Qty 2 4524219543548324601 SHOCKWAVE™ #2 Phillips Qty 5 4524219561948324604 SHOCKWAVE™ #2 Phillips Qty 25 (Tictac) 4524219662348324444 SHOCKWAVE™ #2 Phillips Reduced Diameter Qty 2 4524219547348324462 SHOCKWAVE™ #2 Phillips 50mm Powerbit Qty 1 4524219548048324602 SHOCKWAVE™ #2 Phillips 50mm Powerbit Qty 5 4524219562648324562 SHOCKWAVE™ #2 Phillips 90mm Powerbit Qty 1 4524219559648324463 SHOCKWAVE™ #3 Phillips 50mm Powerbit Qty 1 4524219549748324413 SHOCKWAVE™ #3 Phillips Qty 2 45242195442
Part Number Description EAN
48324421 SHOCKWAVE™ #1 Square Recess Qty 2 4524219545948324422 SHOCKWAVE™ #2 Square Recess Qty 2 4524219546648324605 SHOCKWAVE™ #2 Square Recess Qty 5 4524219563348324607 SHOCKWAVE™ #2 Square Recess Qty 10 (Tictac) 4524219663048324423 SHOCKWAVE™ #3 Square Recess Qty 2 4524219893148324471 SHOCKWAVE™ #1 Sqr Recess 50mm Powerbit Qty 1 4524219550348324472 SHOCKWAVE™ #2 Sqr Recess 50mm Powerbit Qty 1 4524219551048324606 SHOCKWAVE™ #2 Sqr Rec 50mm Powerbit Qty 5 4524219894848324572 SHOCKWAVE™ #2 Sqr 90mm SHOCKWAVE™ 4524219560248324473 SHOCKWAVE™ #3 Square Recess 50mm Powerbit 45242195527
Part Number Description EAN
48324483 SHOCKWAVE™ T15 Torx 50mm Powerbit 4524219553448324484 SHOCKWAVE™ T20 Torx 50mm Powerbit 4524219554148324485 SHOCKWAVE™ T25 Torx 50mm Powerbit 4524219555848324487 SHOCKWAVE™ T30 Torx 50mm Powerbit 45242195565
Part Number Description EAN
48324502 SHOCKWAVE™ Compact Magnetic Bit Holder 4524219557248324503 SHOCKWAVE™ 3" Magnetic Tip Bit Holder 45242195589
41
SHOCKWAVE™ MAGNETIC NUT DRIVERS
SHOCKWAVE™ HEX DRILL BITS
SHOCKWAVE™ SOCKET ADAPTORS
Part Number Description EAN
48325031 SHOCKWAVE™ 1/4" Hex Shank 3/8" Sckt Adaptor 4524219502248325030 SHOCKWAVE™ 1/4" Hex Shank 1/4" Sckt Adaptor 4524219503948325032 SHOCKWAVE™ 1/4" Hex Shank 1/2" Sckt Adaptor 4524219504648034405 SHOCKWAVE™ 3/8" Square x 1/4" Hex Adapter 4524219500848034410 SHOCKWAVE™ 1/2" Square x 1/4" Hex Impact 45242195015
Part Number Description EAN
49664502 SHOCKWAVE™ 1/4" x 50mm Mag. Driver Qty 1 4524219623449664503 SHOCKWAVE™ 5/16" x 50mm Mag. Driver Qty 1 4524219624149664505 SHOCKWAVE™ 3/8" x 50mm Mag. Driver Qty 1 4524219627249664506 SHOCKWAVE™ 7/16" x 50mm Mag. Driver Qty 1 4524219628949664525 SHOCKWAVE™ 3/8" x 50mm Mag. Driver Qty 3 4524219649449664526 SHOCKWAVE™ 7/16" x 50mm Mag. Driver Qty 3 4524219652449664532 SHOCKWAVE™ 1/4" x 65mm Mag. Driver Qty 1 4524219654849664533 SHOCKWAVE™ 5/16" x 65mm Mag. Driver Qty 1 4524219655549664535 SHOCKWAVE™ 3/8" x 65mm Mag. Driver Qty 1 4524219656249664536 SHOCKWAVE™ 7/16" x 65mm Mag. Driver Qty1 45242196579
Part Number Description EAN
48894401 SHOCKWAVE™ 1.5mm (1/16") Hex Drill Bit 4524219506048894403 SHOCKWAVE™ 2.3mm (3/32") Hex Drill Bit 4524219507748894405 SHOCKWAVE™ 3.2mm (1/8") Hex Drill Bit 4524219508448894407 SHOCKWAVE™ 4mm (5/32") Hex Drill Bit 4524219509148894409 SHOCKWAVE™ 5mm (3/16") Hex Drill Bit 4524219511448894411 SHOCKWAVE™ 5.5mm (7/32") Hex Drill Bit 4524219512148894413 SHOCKWAVE™ 6.5mm (1/4") Hex Drill Bit 45242195138
SHOCKWAVE™
42
SHOCKWAVE™ 35 PCE DRIVER SET
SHOCKWAVE™ MAGNETIC NUT DRIVER 3 PCE
Part Number Description EAN
48324402
SHOCKWAVE™ 35Pce Driver SetECX Bits: 1" ECX1(1), ECX2(1)
Phillips Bits: 1" - P1(1), P2(2), P3(1), Power Bit 2"-P1(1), P2(1) Square Bits: 1" - SQ1(1), SQ2(2), SQ3(1), Power Bit 3-1/2" - SQ2(1)
Torx Bits: 2" - T15(1), T20(1), T25(1), T30(1)Slotted Power Bits: 2" SL1/8"(1), SL3/16"(1), SL1/4"(1)
Magentic Nut Drivers: 1/4" red(1), 5/16" yellow(1), 3/8" blue(1)Socket Adaptors: 1/4"(1) hex shank to 3/8" Square & 1/4" hex shand to 1/2" Square
Magnetic Bit Holder, supplied in carry case*5 Kits Per Master Carton*
45242196692
Part Number Description EAN
49664561 1/4", 5/16", 3/8" SHOCKWAVE™ Magnetic Nut Driver 3 Pce 45242196586
43
SHOCKWAVE™ 29 PCE DRIVER SET
SHOCKWAVE™ MAGNETIC NUT DRIVER 4 PCE
Part Number Description EAN
48324401
SHOCKWAVE™ 29Pce Driver SetPhillips Bits: 1" - P1(1), P2(7), P3(2), Power bit 2"-P2(2), P3(1)
Square Bits: 1" - SQ1(1), SQ2(4), SQ3(1), Power Bit 2" - SQ2(2)Torx Bits: 1" - T15(1), T20(1), T25(1), Power bit 2" - T25(1)
Magentic Nut Drivers: 1/4" red(1), 5/16" yellow(1), 3/8" blue(1)Magnetic Bit Holder, supplied in carry case
45242196678
Part Number Description EAN
49664562 1/4", 5/16", 3/8", 7/16" SHOCKWAVE™ Magnetic Nut Drivers 4 Pce 45242196593
SHOCKWAVE™
44
Part Number Description EAN
48320221 21Pce Screwdriver Bit Set - 1/4" HEX (5 = counter display) 45242138197
Part Number Description EAN
48321500 38Pce QUIK-LOK® Drill & Driver Set - 1/4" HEX 45242127733
Part Number Description EAN
48321700 20 Pce Twister 45242128068
45
SAWZALL® BLADES
46
THE AX WOOD CUTTING BLADESFAST CUTTING IN NAIL EMBEDDED WOOD, PLYWOOD & OTHER ENGINEERED TIMBER
CLEAN CUTTING WOOD BLADEFAST CUTTING, CLEAN FINISH
SCROLL CUTTING BLADEMETAL & WOOD, FAST CONTOUR CUTTING AND LONG LIFE
GENERAL PURPOSE BLADESNAIL EMBEDDED WOOD, PLASTICS, FERROUS & NON FERROUS METALS
Part Number TPI Description EAN
48005021 6TPI MILW WOOD RECIP BLADE THE AX 150mm 5TPI PKT 5 45242082988
48005026 6TPI MILW WOOD RECIP BLADE THE AX 230mm 5TPI PKT 5 45242082995
48005027 6TPI MILW WOOD RECIP BLADE THE AX 300mm 5TPI PKT 5 45242083022
Part Number TPI Description EAN
48005015 6TPI MILW WOOD SUPER SHARP RECIP BLADE 150mm 6TPI PKT 5 45242082629
48005016 6TPI MILW WOOD SUPER SHARP RECIP BLADE 230mm 6TPI PKT 5 45242082636
48005017 6TPI MILW WOOD SUPER SHARP RECIP BLADE 300mm 6TPI PKT 5 45242082643
Part Number TPI Description EAN
48005041 4/6TPI MILW WOOD SCROLL RECIP BLADE 150mm 4/6TPI PKT 5 45242082728
48005162 14TPI MILW METAL SCROLL RECIP BLADE 90mm 14TPI PKT 5 45242082803
48005163 18TPI MILW METAL SCROLL RECIP BLADE 90mm 18TPI PKT 5 45242082810
Part Number TPI Description EAN
48005036 5TPI MILW GENERAL PURPOSE RECIP BLADE 230mm 5TPI PKT 5 45242082704
47
METAL CUTTING BLADE - THIN KERFPIPE, CONDUIT, THREADED ROD, ANGLE IRON, DUCT AND OTHER METAL BUILDING MATERIALS
THE WRECKER GENERAL PURPOSENAIL EMBEDDED WOOD, PLASTICS, FERROUS & NON FERROUS METALS
Part Number TPI Description EAN
48005701 8TPI MILW WRECKER GENERAL RECIP BLADE 150mm 8TPI PKT 5 45242082476
48005706 8TPI MILW WRECKER GENERAL RECIP BLADE 230mm 8TPI PKT 5 45242082483
48005711 8TPI MILW WRECKER GENERAL RECIP BLADE 300mm 8TPI PKT 5 45242082490
Part Number TPI Description EAN
48005090 10TPI MILW METAL THIN KERF RECIP BLADE 100mm 10TPI PKT 5 45242082742
48005092 10TPI MILW METAL THIN KERF RECIP BLADE 150mm 10TPI PKT 5 45242082766
48005093 10TPI MILW METAL THIN KERF RECIP BLADE 200mm 10TPI PKT 5 45242082773
48005094 10TPI MILW METAL THIN KERF RECIP BLADE 300mm 10TPI PKT 5 45242082780
48005189 18TPI MILW METAL THIN KERF RECIP BLADE 300mm 18TPI PKT 5 45242082902
48005185 24TPI MILW METAL THIN KERF RECIP BLADE 100mm 24TPI PKT 5 45242082865
48005186 24TPI MILW METAL THIN KERF RECIP BLADE 150mm 24TPI PKT 5 45242082872
48005187 24TPI MILW METAL THIN KERF RECIP BLADE 230mm 24TPI PKT 5 45242082889
THE TORCH METAL BLADEPIPE, CONDUIT, THREADED ROD, ANGLE IRON, DUCT AND OTHER METAL BUILDING MATERIALS
Part Number TPI Description EAN
48005712 10TPI MILW METAL TORCH DEMO RECIP BLADE 150mm 10TPI PKT 5 45242083039
48005713 10TPI MILW METAL TORCH DEMO RECIP BLADE 230mm 10TPI PKT 5 45242083046
48005782 14TPI MILW METAL TORCH DEMO RECIP BLADE 150mm 14TPI PKT 5 45242083060
48005787 14TPI MILW METAL TORCH DEMO RECIP BLADE 230mm 14TPI PKT 5 45242083077
48005784 18TPI MILW METAL TORCH DEMO RECIP BLADE 150mm 18TPI PKT 5 45242083084
48005788 18TPI MILW METAL TORCH DEMO RECIP BLADE 230mm 18TPI PKT 5 45242083091
48005789 18TPI MILW METAL TORCH DEMO RECIP BLADE 300mm 18TPI PKT 5 45242083107
SAWZALL®
BLADES
48
SPECIALTY BLADES
Part Number Description EAN
48001600 MILW FLUSHCUT BLADE PKT 1 452422253272
Part Number Description EAN
48001610 MILW ROUGH IN BLADE PKT 1 45242253289
Part Number Description EAN
49005450 MILW GROUT REMOVER BLADE PKT 1 45242221066
Part Number Description EAN
48005052 MILW PLASTER BLADE 125mm 6TPI PKT 5 45242082735
Part Number Description EAN
48001077 MILW PRUNING BLADE 240 X 4/5 TPI PKT 3 4932323803
Part Number Description EAN
49005463 MILW SCRAPER BLADE 37mm PKT 1 45242219483
49005456 MILW SCRAPER BLADE 75mm PKT 1 45242219476
THE TORCH DIAMOND GRITTILE, FIBREGLASS & BRICK
Part Number Description EAN
48001440 MILW DIAMOND GRIT RECIP BLADE 150mm 6" PKT 1 45242187393
48001450 MILW DIAMOND GRIT RECIP BLADE 230mm 9" PKT 1 45242187416
49
THE TORCH METAL BLADEPIPE, CONDUIT, THREADED ROD, ANGLE IRON, DUCT AND OTHER METAL BUILDING MATERIALS
BULK PACKS
THE AX WOOD CUTTING BLADESFAST CUTTING IN NAIL EMBEDDED WOOD, PLYWOOD & OTHER ENGINEERED TIMBER
THE TORCH METAL BLADEPIPE, CONDUIT, THREADED ROD, ANGLE IRON, DUCT AND OTHER METAL BUILDING MATERIALS
THE WRECKER GENERAL PURPOSENAIL EMBEDDED WOOD, PLASTICS, FERROUS & NON FERROUS METALS
Part Number Description EAN
48008712 MILW METAL TORCH DEMO RECIP BLADE 150mm 10TPI PKT 25 45242082377
48008713 MILW METAL TORCH DEMO RECIP BLADE 230mm 10TPI PKT 25 45242082384
Part Number Description EAN
48008021 MILW WOOD RECIP BLADE THE AX 150mm 5TPI PKT 25 45242082285
48008026 MILW WOOD RECIP BLADE THE AX 230mm 5TPI PKT 25 45242082292
48008027 MILW WOOD RECIP BLADE THE AX 300mm 5TPI PKT 25 45242082308
Part Number Description EAN
48008782 MILW METAL TORCH DEMO RECIP BLADE 150mm 14TPI PKT 25 45242082391
48008784 MILW METAL TORCH DEMO RECIP BLADE 150mm 18TPI PKT 25 45242082407
48008787 MILW METAL TORCH DEMO RECIP BLADE 230mm 14TPI PKT 25 45242082414
48008788 MILW METAL TORCH DEMO RECIP BLADE 230mm 18TPI PKT 25 45242082421
48008789 MILW METAL TORCH DEMO RECIP BLADE 300mm 18TPI PKT 25 45242082438
Part Number TPI Description EAN
48008706 8TPI MILW WRECKER GENERAL RECIP BLADE 230mm 8TPI PKT 25 9322191205165
SAWZALL®
BLADES
50
THE TORCH METAL BLADEPIPE, CONDUIT, THREADED ROD, ANGLE IRON, DUCT AND OTHER METAL BUILDING MATERIALS
12 PCE SAWZALL® KIT
HACKZALL™ BLADES
Part Number TPI Description EAN
48016182 14TPI MILW METAL THIN KERF RECIP BLADE 150mm 14TPI PKT 50 45242084722
48016184 14TPI MILW METAL THIN KERF RECIP BLADE 150mm 18TPI PKT 50 45242084739
48016284 18TPI S/Saw Blades Metal/Torch 150mm 18TPI PKT 50 45242084937
48016188 18TPI MILW METAL THIN KERF RECIP BLADE 230mm 18TPI PKT 50 45242084876
48016189 18TPI MILW METAL THIN KERF RECIP BLADE 300mm 18TPI PKT 50 45242084883
Part Number Description EAN
49221129150mm 18TPI The Torch(4), 150mm 8TPI The Wrecker(2),
150mm 5/8TPI The Ax(2), 230mm 5/8TPI The Ax, 230mm 14TPI The Torch(2), Supplied With Heavy Duty Case
45242180813
Part Number Description EAN
49005310 HACKZALL™ Wood Scroll Blades 5 PKT 45242160303
49005324 HACKZALL™ Metal Scroll Blades 45242160310
49005414 HACKZALL™ 100mm 14TPI PVC 5 PKT 45242160280
49005614 HACKZALL™ 150mm 14TPI PVC 5 PKT 45242160358
49005418 HACKZALL™ 100mm 18TPI EMT 5 PKT 45242160297
49005424 HACKZALL™ 100mm 24TPI Duct 5 PKT 45242160327
49005460 HACKZALL™ 100mm 6TPI Wood 5 PKT 45242160334
49005461 HACKZALL™ 100mm 6TPI Plaster 5 PKT 45242160341
49005400 HACKZALL™ Blade 100mm Grit 45242160266
49005450 HACKZALL™/SAWZALL® Grout Remover 45242221066
49005463 HACKZALL™/SAWZALL® 37mm Scraper Blade 45242219483
49005456 HACKZALL™/SAWZALL® 75mm Scraper Blade 45242219476
49005410 HACKZALL™ Blade Multi-Material 5 PKT 45242160273
49220220 HACKZALL™ General Purpose Set 10 PKT 45242160365
51
BAND SAW BLADESFOR USE ON MILWAUKEE M28 CORDLESS BAND SAWS
BAND SAW BLADES FOR USE ON MILWAUKEE M18 CORDLESS BAND SAWS
BAND SAW BLADES FOR USE ON MILWAUKEE M12 CORDLESS BAND SAWS
Part Number TPI Description EAN
48390500 10TPI B/Saw Blade M28 1140 x 10TPI Deep Cut PKT 1 45242132058
48390501 10TPI B/Saw Blade M28 1140 x 10TPI Deep Cut PKT 3 45242132096
48390550 10/14TPI B/Saw Blade M28 1140 x 10/14TPI Deep Cut PKT 1 45242132454
48390551 10/14TPI B/Saw Blade M28 1140 x 10/14TPI Deep Cut PKT 3 45242132461
48390510 14TPI B/Saw Blade M28 1140 x 14TPI Deep Cut PKT 1 45242132157
48390511 14TPI B/Saw Blade M28 1140 x 14TPI Deep Cut PKT 3 45242132164
48390561 14/18TPI B/Saw Blade M28 1140 x 14/18TPI Deep Cut PKT 3 45242132560
48390521 18TPI B/Saw Blade M28 1140 x TPI18 Deep Cut PKT 3 45242132263
48390530 24TPI B/Saw Blade M28 1140 x 24TPIDeep Cut PKT 1 45242132355
48390531 24TPI B/Saw Blade M28 1140 x 24TPI Deep Cut PKT 3 45242132362
Part Number TPI Description EAN
48390529 18TPI B/Saw Blade M18 899 x 18TPI PKT 3 45242201747
48390538 24TPI B/Saw Blade M18 899 x 24TPI PKT 1 45242201914
Part Number TPI Description EAN
48390572 18TPI M12 Bandsaw Blades 18TPI PKT 3 45242272341
1140 x 12mm
899 x 12mm
685 x 12mm
SUITABLE FOR
HD18BS
SUITABLE FOR
M28BS
SUITABLE FOR
M12BS
BANDSAWBLADES
52
CIRCULAR SAW BLADES
METAL SAW BLADES
Part Number Description EAN
48404108 Circ Saw Blade 6-1/2" (165mm) 24CBD T (Suits HD18CS & HD28CS) 45242132669
48404120 Circ Saw Blade 7-1/4" (185mm) 24CBD T (Suits CS60) 45242132690
Part Number Description EAN
48404070 Metal Saw Blade 5 3/8" 30T - Ferrous Metals 45242233786
48404075 Metal Saw Blade 5 3/8" 50T - Non-Ferrous Metals 45242233793
SUITABLE FOR
HD18MS
SUITABLE FOR
CS60
FOR
SUITABLE FORHD18CSM18CCS55-0
53
HAND TOOLS
54
FEATURES:> Reaming head design
> Laser hardened jaws
> Durable rubber grip
*Pliers not insulated
*Pliers not insulated
TONGUE & GROOVE PLIERS
Part Number Description EAN
A48223210 Multi Grips, Straight Jaws, 250mm 45242297887
A48223212 Multi Grips, Straight Jaws, 300mm 45242297894
Part Number Description EAN
A48223108 Multi Grips, V-Notch Jaw, Ratchet Handle, 200mm 45242297900
A48223110 Multi Grips, V-Notch Jaw, Ratchet Handle, 250mm 45242297917A48223112 Multi Grips, V-Notch Jaw, Ratchet Handle, 300mm 45242297924
Part Number Description EAN
A48221910 MILWAUKEE Side Sliding Utility Knife 45242297931
FEATURES:> V-Notch jaws
> Reaming head design
> Quick adjust mechanism
> Reaming handle
QUICK ADJUST REAMING PLIERS
FEATURES:> Tool free blade change
> Side sliding blade activation
> Blade storage
> Rubber overmold
> Wire stripper
SIDE SLIDING UTILITY KNIFE
55
Part Number Description EAN
A48224200 ProPEX® / Tubing Cutter 45242298044
FEATURES:> V-shaped blade
> Replaceable blades
> Rework groove
> One hand locking
PROPEX® / TUBING CUTTER
*Replacement Blade A48224201
FEATURES:> Serrated jaws
> Forged cutter head
> Rust protection
> One-hand locking
> Flush bolt design
AVIATION & BULLDOG SNIPS
*Snips not insulated
Part Number Description EAN
A48224030 Snips Straight Cutting 45242297948
A48224010 Snips, Left Cutting 45242297955A48224020 Snips, Right Cutting 45242297962A48224000 Snips, Bulldog 45242297979
HANDTOOLS
56
FEATURES:> Compact design
> Tool free blade change
> Overmold grip
COMPACT HACK SAW
FEATURES:> Rubber overmold
> 150mm plaster/drywall blade
> Built-in rasping holes patent pending
RASPING JAB SAW
FEATURES:> Folding blade
> Overmold grip
> Tool free blade change
> Uses standard SAWZALL®® racip saw blades
FOLDING JAB SAW
FEATURES:> Reaming grooves
> Digging grooves
> 0º, 45º, 90º leveling vials
> Strong rare earth magnets
> Reaming grooves
PLUMBERS TORPEDO LEVEL
Part Number Description EAN
A48220012 MILWAUKEE Compact Hack Saw 45242298013
Part Number Description EAN
A48220304 MILWAUKEE Rasping Jab Saw 45242298020
Part Number Description EAN
A48220305 MILWAUKEE Folding Jab Saw 45242298037
Part Number Description EAN
A48225109 Plumbers Torpedo Level 45242301096
HARDER HITTING.HALF THE WEIGHT.FASTER SWING.EASIER TO USE.
HEALTHIER FOR YOUR ARM
58
Part Number Description EAN
TBM14RMCTiBone Mini-14 oz. All Titanium Hammer,
milled head, 15" Handle662560150078
Part Number Description EAN
TICLW-12 Ti 8oz Titanium Nail Puller with dimpler 662560130001
Part Number Description EAN
AG-102 AirGrip Coldshrink 8" x 2" grip wrap tube 662560901021
Part Number Description EAN
TBM-MR TiBone Mini-14 Milled Repl. Face w/ Bolt 662560150184
TBM-SR TiBone Mini-14 Smooth Repl. Face w/ Bolt 662560150177
TB-MR TiBone 15oz Milled Repl. Face w/ Bolt kit 662560150115
TB-SR TiBone 15oz. Smooth Repl. Face w/ Bolt kit 662560150122
59
WORK WEAR / BAGS
DUST EXTRACTOR ACCESSORIES
RIGHT ANGLE ATTACHMENT
60
WORK GEAR
Part Number Description EAN Dimensions
4931427039 Milwaukee Contractor Bag Medium - Wheels 4002395904075 L430mm x W335mm x H230mm
4931427040 Milwaukee Contractor Bag Large - Wheels 4002395841394 L560mm x W335mm x H270mm
Part Number Description EAN
49170180 Milwaukee Bucket Organiser 50 Pockets 9322191020416
Part Number Description EAN
233520 Milwaukee M12 Cordless Drill Holster 45242200962
Part Number Description EAN Dimensions
48553490 Milwaukee Contractor Bag Small 45242148561 L430mm x W228mm x H254mm
48553530 Milwaukee Contractor Bag Xlarge 9322191019298 L600mm x W305mm x H300mm
61
DUST EXTRACTOR ACCESSORIES
Part Number Description EAN
4932352303 Filter Cartrige AS250ECP 4002395369621
4932352304 Filter Cartridge AS300ELCP 4002395369638
Part Number Description EAN
4932352306 AS250ECP Replacement Filter Bags (1 x Disposable, 4 x Bags) 4002395369652
4932352307 AS300ELCP Replacement Filter Bags (5 x Bags) 4002395369669
Part Number Description EAN
4932352309 AS300ELCP Replacement Filter Bags (5 x Disposable Bags) 4002395369683
Part Number Description EAN
4932265320 Dust (Collection) Cap 4002395302741
MISC
62
QUIK-LOK®
FIXTEC NUTFOR USE WITH ANGLE GRINDERS M14 THREAD
RIGHT ANGLE ATTACHMENT
GLOBES
LED GLOBES
Part Number Description EAN
4932373506 QUIK-LOK® Cable 4m 550G 4002395351763
Part Number Description EAN
4932352474 Milwaukee Fixtec Nut (12 Pack Counter Display) 4002395371334
Part Number Description EAN
49228510 Milwaukee WB2 Right Angle Attachment 45242183524
48062871 Right Angle Drill Head for HDE13RQD 45242088812
Part Number Description EAN
49810020 Globe Worklamp 12-14.4V PKT 2 45242210565
49810030 Globe Worklamp 18V PKT 2 45242210572
49810040 Globe Worklamp 28V PKT 2 9322191088287
Part Number Description EAN
49810090 LED Replacement Globe 10045242197337
63
M12 MULTI TOOL ACCESSORIES
Part Number Description EAN
C12MT-BLADES Steel Blade For Wood PKT 2 4892210126627
C12MT-PAPER Sandpaper Mixed PKT 12 (3 x 60G, 3 x 80G, 3 x 120G, 3 x 240G) 4892210126610
Part Number Description EAN
202001004 C12MT Complete Kit (Blade Acc. Pack, 018054 / Serv Part ANZ) N/A
303590005 Sanding Pad - C12MT N/A
611273001 Adapter C12MT N/A
MISC
64
DEALER
MILWAUKEE AUSTRALIAmilwaukeetools.com.au
Doncaster, VIC 3108Local Call: 1300 361 505
OfficeFree Fax: 1800 807 993
MILWAUKEE NEW ZEALANDmilwaukeetools.co.nzMt Wellington, Auckland 1060
Local Call: 0800 279 624OfficeFree Fax: 0800 479 624
The range of products and content shown in this catalogue may vary depending on availability.Products and specifications may change without notice.
Errors and emissions & exceptions disclaimer and copyright.