Martin Gillett01384 232175 01384 232177 07970 938010
www.mgstainless.co.uk [email protected]
Sales Contact:Telephone: Facsimile: Mobile:
Website: E Mail:
Stainless steelsanitaryware,
washroom andcatering equipment
MG Stainless LimitedUnits 1 & 2, Shaw Road, Netherton, DUDLEY, DY2 8TS
Contents
General information
Urinals
WC Pans / Suites
Washtroughs/Washfountains
Drinking Fountains
Basins
Inset Basin & Bowls
Inset Bowls
Bucket / Utility Sinks
Janitorial UnitsShower Trays / Cubicles
Hospital Equipment
Wall Mounted Trough UrinalFloor Recessed Slab UrinalFloor Standing Slab UrinalFloor Standing Trough UrinalBowl Urinal
Pedestal WC PansShrouded WC PansWall Mounted WC PanClose Coupled WC SuiteDisabled WC PanRear Panelled WC SuiteSquatting WC Pan
Contract WashtroughTaplanding WashtroughSplashback WashtroughIsland WashtroughWashfountains
Standard Drinking FountainShrouded Drinking FountainInset Drinking FountainPedestal Drinking FountainWall-recessed Drinking Fountain
Standard BasinSmall BasinMini BasinCorner BasinCircular Inset BasinWall Recessed Basin
Oval Inset BasinOval Inset Vanity BowlInset Sink Bowls
Vanity BowlsCircular Inset BowlsSquare Inset BowlRectangular Inset Bowl
Bucket SinksUtility Sinks
Floor Recessed Shower TrayFloor Standing Shower TrayShower Cubicles
Taplanding Scrub-upTtrough
Splashback Scrub-up TroughStandard Scrub-up TroughCombined Sink/Slop HopperCombined Slop Hopper/DrainerWall Mounted Slop HopperFloor Standing Slop HoppeJanitorial UnitrHospital SinksPlaster Sink
Vanitory Units and Tops
Inset Sink Bowls
Ice Sink UnitsSingle Inset Ice SinkDouble Inset Ice Sink
Mini Sink UnitsStandard Sink UnitsStandard Sink Units (continued)Large Sink UnitsLarge Sink Units (continued)Hot Rinse Sink Units
Centre TableWall TableWall ShelfMicrowave Shelf
Floor CupboardSink CupboardWall Cupboard
Hand DrierPaper Towel DispenserWaste BinNapkin Disposal BinToilet Roll HoldersToilet Tissue DispenserLiquid Soap DispensersSoap ShelfRobe HooksStainless Steel Mirrors
Standard Grab RailsAngled Grab RailPadded BackrestHingedown Grab RailsVertical Poles
Hospital Equipment (continued)
Vanitory Units
Inset Sink Bowls
Ice Sinks
Sinks
Tables / Shelves
Cupboards
Accessories
Grab Rails
Page 45678
9101111121313
1414151516
17171818
18a
191919202020
20a20a20a
21212121
2222
22a
232324
25
Page 2526262727
27a27a2828
29
30
313131
323334353637
38383838
393939
40404041414142424242
4343434444
Page 3
Non Standard ProductsWe are able to manufacture special items, where site conditions or specific requirements preclude the use ofstandard products or sizes. Please supply us with exact details and a drawing to avoid any mistakes.
June 2010
Page 2
Policy StatementThe Company was founded in 1996 as Midtherm Stainless Limited and re-named MG Stainless Limited inOctober 2002. We offer a comprehensive range of sanitaryware, washroom and catering equipment, for projectsrequiring the durability and hygienic properties of stainless steel, manufactured and supplied by skilled andexperienced personnel.
Our aim is to provide our customers with quality products and service, promptly, efficiently and competitively.Therefore, as a policy of continual improvement, we reserve the right to alter specifications without prior notice.
All our standard products are manufactured from grade 304 or grade 430 stainless steel to European StandardEN 10088-2, which is suitable for general use in toilets, washrooms and kitchens, within a normal workingenvironment.
If equipment is to be regularly used for any other purpose, or under abnormal atmospheric conditions, eg.swimming pool, marine, laboratory use etc. grade 316 stainless steel may be more suitable, as it offers greaterresistance to corrosive attack from chlorinated water in high ambient humidity, salt and other chemicals.
All grades of stainless steel are affected by a few specific chemicals and acids, so please contact the salesoffice for advice, if you are unsure of its suitability.
Material Specification
Installation AdviceStainless steel fixings should always be used, especially under wet or humid conditions.
If strong acid solutions used for cleaning tiles or masonry, come into contact with stainless steel, rinse offthoroughly with clean water and wipe dry. Hydrochloric or sulphuric acid will attack stainless steel.
Plain carbon steel nails, screws, paint tins, grinding swarf, wire wool etc., left on stainless steel will rust anddiscolour the surface, giving the impression that the stainless steel is rusting.
Upon completion of installation, remove any debris and clean thoroughly, as recommended in Care andMaintenance.
Care and MaintenanceStainless steel should be cleaned with soap or mild detergent and water, using a sponge or cloth, then rinsedwith clean water and wiped dry.
If stubborn marks or deposits are allowed to form, use a cream cleaner that is suitable for stainless steel and,if necessary, a nylon pad or brush.
Regular cleaning, once a week, should avoid any problems.
WarningIf the correct grade of stainless steel is used for its intended purpose, within the correct environment andcleaned correctly, it will not rust or stain and will maintain its original appearance for many years.
If it is not cleaned regularly, dirt and other deposits can build up and discolour the surface of stainless steel andwill often resemble rust. However, stubborn marks and deposits can be removed. See Care and Maintenance.
Only use cleaning solutions clearly recommended for use with stainless steel. If in doubt, do not use.
If any liquid containing bleach (sodium hypochlorite) is used on, or accidentally splashed on, stainless steel, achemical reaction can occur. If it is not rinsed off with clean water and wiped dry, within a few minutes, thisreaction causes pitting corrosion of the surface and subsequently rust, which is irreparable.
General Information Page 3
January 2003
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, with polished end panels (suitable forwall or exposed installation), 38mm white plastic domed waste outlet (in a left, right or central position), white highimpact polystyrene cistern and all necessary pipework, clips and fixings, unless ordered otherwise. Available inany length, up to 3000mm, allowing approximately 600mm per person. For lengths in excess of 3000mm or forcorner installations, two or more separate urinals should be used, each with their own waste and cistern.There are two types of flushing arrangements:1/ Top inlet (TI) square spargepipe with exposed cistern.2/ Back inlet (BI) spreaders with concealed cistern.
U01 - Wall Mounted Trough Urinal
498
295
1100
600
450 approx.
Optional Extras
Joint cover trimCorner cappingTrap Shroud
J0795C0796T0000
Stainless steel automatic cistern50mm CP brass domed wasteDownpipe Shroud
C0798W1201D0796
230
Length
Not to scale
Cornerinstallation
C0796cornercapping
Length over 3000
J0795 Joint cover trim
186
Vandal - resistant square spargepipe
Concealed hangerbrackets
Urinals Page 4
August 2004
U03 - Floor Recessed Slab Urinal
498
295
1100
1050
Optional Extras
Joint cover trimCorner capping
J0795C0796
Downpipe ShroudStainless steel automatic cistern
D0796C0798
350
100 max.
186
Length
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, with polished end panels (suitable forwall or exposed installation), 50mm chromium-plated domed waste outlet (in a left, right or central position, whitehigh impact polystyrene cistern and all necessary pipework, clips and fixings, unless ordered otherwise. Availablein any length, up to 3000mm, allowing approximately 600mm per person. For lengths in excess of 3000mm or forcorner installations, two or more separate urinals should be used, each with their own waste and cistern.There are two types of flushing arrangements:1/ Top inlet (TI) square spargepipe with exposed cistern.2/ Back inlet (BI) spreaders with concealed cistern.
Cornerinstallation
C0796cornercapping
Length over 3000
J0795 Joint cover trim
Vandal - resistantsquare spargepipe
Optional elbowsto allow use of concealedcistern with squarespargepipe
E2522
Urinals Page 5
Not to scale August 2004
U04 - Floor Standing Slab Urinal
295
1100
1050
Optional Extras
400Removable access
Cornerinstallation
C0796cornercapping
Length over 3000
J0795 Joint cover trim
Joint cover trimCorner capping50mm CP brass domed waste
J0795C0796W1102
498 186
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, with polished end panels (suitable forwall or exposed installation), 38mm white plastic domed waste outlet (in a left, right or central position), whitehigh impact polystyrene cistern and all necessary pipework, clips and fixings, unless ordered otherwise. Availablein any length, up to 3000mm, allowing approximately 600mm per person. For lengths in excess of 3000mm or forcorner installations, two or more separate urinals should be used, each with their own waste and cistern.There are two types of flushing arrangements:1/ Top inlet (TI) square spargepipe with exposed cistern.2/ Back inlet (BI) spreaders with concealed cistern.
350
Length
Downpipe ShroudStainless steel automatic cistern
D0796C0798
Fixed panel for sealing to floor
Vandal - resistantsquare spargepipe
Urinals Page 6
Not to scale August 2004
U05 - Floor Standing Trough Urinal
295
1100
1050
Optional Extras
600
186
Removable access
Cornerinstallation
C0796cornercapping
Length over 3000
J0795 Joint cover trim
Back inlet spreaders
Joint cover trimCorner capping50mm CP brass domed waste
J0795C0796W1102
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, with polished end panels (suitable forwall or exposed installation), 38mm white plastic domed waste outlet (in a left, right or central position), whitehigh impact polystyrene cistern and all necessary pipework, clips and fixings, unless ordered otherwise. Availablein any length, up to 3000mm, allowing approximately 600mm per person. For lengths in excess of 3000mm or forcorner installations, two or more separate urinals should be used, each with their own waste and cistern.There are two types of flushing arrangements:1/ Top inlet (TI) square spargepipe with exposed cistern.2/ Back inlet (BI) spreaders with concealed cistern.
350
Length
Downpipe ShroudStainless steel automatic cistern
D0796C0798
Fixed panel for sealing to floor
498
Urinals Page 7
Not to scale August 2004
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, with 38mm white plastic domedwaste outlet, white high impact polystyrene cistern and all necessary pipework, clips and fixings.There are two basic types of flushing arrangements:1/ Top inlet (TI) spreaders - for exposed cistern.2/ Back inlet (BI) spreaders - for concealed cistern.
498 186
295
1100
500
450 approx.
Optional ExtrasStainless steel automatic cisternC0798
230
300 600
U0601U0602U0603U0604U0605U0606
- Range of one- Range of two- Range of three- Range of four- Range of five- Range of six
U06 - Bowl Urinal
Concealed hangerbrackets
Urinals Page 8
Not to scale
Trap ShroudT0000
January 2003
498
186
485
335
240
550
410
355
295
498
186
485
335
550
295
1680
410
Optional Extras
W1099S1187
Black plastic seat and coverStainless steel WC seat hinges
D0100 Disabled plinth - 50mm high
Black polypropylene seat padsDisabled cistern leverStainless steel clad WC Cubicles
S1188C1197W103
W1001 - Pedestal WC Pan - P trapC1195 - Low level cistern
The WC pan is manufactured from 1.6 and 2mm thick grade 304, satin polished stainless steel, with securityflushing rim, 76/102mm diameter plastic pan connector and 38mm diameter flushpipe connection. The cistern andflushpipe (405x254mm) are manufactured from 1.2mm grade 304, satin polished stainless steel, with 7 litre plasticfittings.
W1002 - Pedestal WC Pan - S trapC1196 - High level cistern
The WC pan is manufactured from 1.6 and 2mm thick grade 304, satin polished stainless steel, with securityflushing rim, 76/102mm diameter plastic pan connector and 38mm diameter flushpipe connection. The cisternand flushpipe (1680x254mm) are manufactured from 1.2mm grade 304, satin polished stainless steel, with 7 litreplastic fittings.
S1188 Black polypropylene seat pads
WC Pans/Suites Page 9
Not to scale June 2004
W1003 - Shrouded WC Pan - P trap
Manufactured from 1.6 and 2mm thick grade 304, satin polished stainless steel, with security flushing rim,76/102mm diameter plastic pan connector, 38mm diameter flushpipe connection and four M8 fixing bolts & angles.
W1004 - Shrouded WC Pan - S trap
505
146
Wall thickness
490
350
185
30
285
457
390
Manufactured from 1.6 and 2mm thick grade 304, satin polished stainless steel, with security flushing rim,76/102mm diameter plastic pan connector, 38mm diameter flushpipe connection and four M8 fixing bolts & angles.
420
150
Wall thickness
640
350
85
390
300
Optional Extras
S1188W1099S1187R1186
F1192
Black polypropylene seat padsBlack plastic seat and coverStainless steel WC seat hingesRear extension box (to allow conversionof P trap pan into S trap using plasticconversion bend)Floor or wall fixing flanges
Low level concealed plastic cistern andflushpipe with standard lever kit. Pleasespecify wall thicknessLow level concealed plastic cistern andflushpipe with pneumatic push button kit.Please specify wall thicknessStainless steel clad WC Cubicles
C1193
C1200
W103
S1188 Black polypropylene seat pads
C1193 Low level concealed plastic cisternand flushpipe with standard lever kit.
Page 10WC Pans/Suites
Not to scale
S trap conversion bend
June 2004
390
C1200 Low level concealed plastic cisternand flushpipe with push button kit.
W1005 - Wall Mounted WC Pan - P trap
Optional Extras
505
490
350
285
345
457
Wall thickness
140
30
Manufactured from 1.6 and 2mm thick grade 304, satin polished stainless steel, with security flushing rim,76/102mm diameter plastic pan connector, 38mm diameter flushpipe connection, loose backplate and four M8fixing bolts & angles.
146
Low level concealed plastic cistern andflushpipe with pneumatic push button kit.Please specify wall thickness.Stainless steel clad WC Cubicles
C1200
W103
W1008 - Close Coupled WC Suite - P trap
The pan is manufactured from 1.6 and 2mm thick grade 304, satin polished stainless steel, with security flushingrim,76/102mm diameter plastic pan connector, 38mm diameter flushpipe connection and four M8 fixing bolts &angles. The cistern is manufactured from 1.2 mm thick grade 304, satin polished stainless steel and is fitted witha recessed push button dual flush and bottom connections for the supply and overflow (unless specified otherwise).
390
477
185350
450
640
85
C1193 Low level concealed plastic cisternand flushpipe with standard lever kit.
S trap conversion bendcan be used if required
S1188 Black polypropylene seat pads
S1188W1099S1187C1193
Black polypropylene seat padsBlack plastic seat and coverStainless steel WC seat hingesLow level concealed plastic cistern andflushpipe with standard lever kit. Pleasespecify wall thickness
Page 11WC Pans/Suites
Not to scale June 2004
Manufactured from 1.6 and 2mm thick grade 304, satin polished stainless steel, with security flushing rim,76/102mm diameter plastic pan connector, 38mm diameter flushpipe connection and four M8 fixing bolts &angles.
W1006 - Disabled WC Pan - P trap
Optional Extras
Manufactured from 1.6 and 2mm thick grade 304, satin polished stainless steel, with security flushing rim,76/102mm diameter plastic pan connector, 38mm diameter flushpipe connection and four M8 fixing bolts &angles.
W1007 - Disabled WC Pan - S trap
750
350
195
420
150
Wall thickness
300
450215
750
350
505
146
Wall thickness
457
450
S1188W1099S1187F1192C1193
Black polypropylene seat padsBlack plastic seat and coverStainless steel WC seat hingesFloor and/or wall fixing flangesLow level concealed plastic cistern andflushpipe with standard lever kit. Pleasespecify wall thickness
C1197 Cistern leverfor disabled
G8808 PaddedBackrest
285
C1193 Low level concealed plastic cisternand flushpipe with standard lever kit.
G8808 PaddedBackrest
Page 12WC Pans/Suites
Not to scale
30
June 2004
Low level concealed plastic cistern andflushpipe with standard lever kit. Pleasespecify wall thicknessLow level concealed plastic cistern andflushpipe with pneumatic push button kit.Please specify wall thicknessCistern lever for disabled
C1193
C1200
C1197
C1200 Low level concealed plastic cisternand flushpipe with push button kit.
390
650
750
350
185
640
390
The pan is manufactured from 1.6 and 2mm thick grade 304, satin polished stainless steel, with security flushingrim and 76/102mm diameter plastic pan connector (or an S trap plastic conversion bend can be supplied on request)The rear panel is manufactured from 1.2mm thick, satin polished stainless steel and includes a 7.5 litre dualflush cistern and has removable access panels for fixing and making the plumbing connections.
W1010 - Rear Panelled WC Suite - P trap
W1011 - Squatting WC Pan - spigot outlet
Manufactured from 1.6mm thick grade 304, satin polished stainless steel, with 38mm back inlet flushingspreader and 110mm diameter spigot drainage outlet. A high level cistern must be used, at the recommendedfixing height of 1700mm.
505
146
700
Wall thickness
700
270
Optional Extras
S1188W1099S1187F1192W103
Black polypropylene seat padsBlack plastic seat and coverStainless steel WC seat hingesFloor and/or wall flangesStainless steel clad WC Cubicles
High level concealed plastic cistern andflushpipe with standard lever kit. Pleasespecify wall thicknessLow level concealed plastic cistern andflushpipe with pneumatic push button kit.Please specify wall thickness
C1194
C1200
C1194 High levelconcealed plasticcistern and flushpipewith lever kit. 1700
Page 13WC Pans/Suites
Not to scale June 2004
285
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with brackets and 38mmplastic grated waste (in a left, right or central position). Suitable for use with wall-mounted taps, usingpre-mixed water. Available in any length, up to 3000mm, allowing approximately 600mm per person.
W13 - Contract Washtrough
Optional ExtrasS17L1799T8902E2615S9401T9622
Loose splashback 300mm highStainless steel leg supportsCross head BS5412 bib tapWallplate elbowSwan neck spoutThermostatic mixing valve 22mm
Knee operated valve - wall-mountedwith 20 second timed delayKnee operated valve - frame mounted,non concussiveFoot operated valve - non concussive
K9301
K9302
F9304
315
100
200
700 approx
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with brackets and 38mmplastic grated waste (in a left, right or central position). Suitable for use with deck-mounted taps or spouts,using pre-mixed water. Available in any length, up to 3000mm, allowing approximately 600mm per person.
W14 - Taplanding Washtrough
370
25
200
700 approx
Length
Length
440
Hot water
Cold water
Thermostatic mixing valvePre-mixed water
75 taplanding
T8902E2615
Bib taps &Wallplate elbows
S9401 Swan neck spout
K9301 Knee valve
L1799 Leg supports
Page 14Washtroughs
Not to scale June 2010
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with brackets and 38mmplastic grated waste (in a left, right or central position). Suitable for use with bib spouts, using pre-mixed water.Available in any length, up to 3000mm, allowing approximately 600mm per person.
W15 - Splashback Washtrough
Optional ExtrasS17L1799S9401S9402T9622
Central splashback 300mm highStainless steel leg supportsSwan neck spoutBib spoutThermostatic mixing valve 22mm
Knee operated valve - wall-mountedwith 20 second delayKnee operated valve - frame mounted,non concussiveFoot operated valve - non concussive
K9301
K9302
F9304
355
300
200
700 approx
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with 30mm square tubularstainless steel stand and 38mm plastic grated waste (in a left, right or central position). Suitable for use withdeck-mounted taps or spouts, using pre-mixed water. Available in any length, up to 3000mm, allowingapproximately 600mm per person.
W16 - Island Washtrough
200
700 approx
740
Length
Length
Cold water
Thermostatic mixing valvePre-mixed water
Hot water
150
60
S9402 Bib spout
K9302 Knee valve
L1799 Leg supports
T9011 Swan neck spouts
Hot water
Cold water
Thermostatic mixing valve
F9304 Foot valves
Pre-mixedwater
Concealed hangerbrackets
Page 15Washtroughs
Not to scale June 2010
Manufactured from 1.2/1.5mm thick grade 304, satin polished stainless steel and supplied fully assembled witha liquid soap dispenser built into the spray head assembly. The individual foot operated valves activate wateras long as the push button is depressed. The waste connection is via a 38mm plain spigot and the connectionsto the thermostatic mixing valve (with combined isolating and strainer valves) is via 1/2” BSP female threads.Hot and cold water supply pipes should be a minimum of 28mm diameter reducing in size within the pedestalfor connection to the 1/2” BSP connections. Water pressure needs to be a minimum of 1.5bar (22 psi), butshould not exceed 7 bar (101 psi), otherwise a pressure reducing valve should be used. When the pressure isbelow 1.5 bar, we suggest using a twin impellor pump (minimum 2 bar).
W1701 - Foot-operated Washfountain (8 person)W1702 - Foot-operated Washfountain (6 person)
Page 16Washfountains
Not to scale
Manufactured from 1.2/1.5mm thick grade 304, satin polished stainless steel and supplied fully assembled witha liquid soap dispenser built into the spray head assembly. The individual hand or sensor operated valves activatewater for between 5 and 60 seconds (subject to adjustment). The waste connection is via a 38mm plain spigot andthe connections to the thermostatic mixing valve (with combined isolating and strainer valves) is via 1/2” BSP femalethreads. Hot and cold water supply pipes should be a minimum of 28mm diameter reducing in size within the pedestalfor connection to the 1/2” BSP connections. Water pressure needs to be a minimum of 1.5bar (22psi), but should notexceed 7 bar (101psi), otherwise a pressure reducing valve should be used. When the pressure is less than 1.5 bar,we suggest using a twin impellor pump (minimum 2 bar).
W1703 - Hand-operated Washfountain (8 person)W1704 - Hand-operated Washfountain (6 person)W1705 - Sensor-operated Washfountain (8 person)W1706 - Sensor-operated Washfountain (6 person)
254
864
8 person - 1372 diameter6 person - 972 diameter
8 person - 1118 diameter6 person - 838 diameter
8 person - 1372 diameter6 person - 972 diameter
8 person - 1118 diameter6 person - 838 diameter
254
864
June 2004
Manufactured from 1.2mm thick grade 304, bright polished stainless steel, supplied with integral bracket,32mm plastic grated waste and chromium plated brass bubbler with push-button control and 15mmcompression inlet.
D2001 - Standard Drinking Fountain
Optional ExtrasCarafe filler can be supplied in lieu of Bubbler
Chromium plated brass bottle trapB2199
Chromium plated brass 200mm longextension and wall flange
B2198
305
350225
Manufactured from 1.2mm thick grade 304, bright polished stainless steel, supplied with removable shroud,32mm plastic grated waste and chromium plated brass bubbler with push-button control and 15mmcompression inlet. A is available with a shroud to the floor.D2002F
D2002 - Shrouded Drinking Fountain
B2199 Bottle trapB2198 Extension
Page 17Drinking Fountains
Not to scale June 2010
75
305
350320
900 approx.
75
Manufactured from 1.2mm thick grade 304, bright polished stainless steel, supplied with integral bracket,32mm plastic grated waste and chromium plated brass bubbler with push-button control and 15mmcompression inlet.
D2001 - Square Drinking Fountain
310
310 200
900 approx.
900 approx.
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with 32m plastic gratedwaste and chromium plated brass bubbler with push-button control and 15mm compression inlet.
D2003 - Inset Drinking Fountain
Optional Extras
Chromium plated brass 200mm longextension tube and wall flange
B2198
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with removable access,floor fixing flange, 32mm plastic grated waste and chromium plated brass bubbler with push-button controland 15mm compression inlet.
D2004 - Round Pedestal Drinking Fountain
900
60
310
260
260
Floor fixing flange
Chromium plated brass bottle trapB2199
Page 18Drinking Fountains
Not to scale November 2008
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with 32m plastic gratedwaste and chromium plated brass bubbler with push-button control and 15mm compression inlet.
D2005 - Wall-recessed Drinking Fountain
Page 18aDrinking Fountains
Not to scale November 2008
660
330
480
520
400
8mm allthread studdingand fixing angles
40
100
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with removable access,floor fixing flange, 32mm plastic grated waste and chromium plated brass bubbler with push-button controland 15mm compression inlet.
D2004 - Square Pedestal Drinking Fountain
310
310
915
Optional ExtrasL1298L1298U1399U1398T8901T9011T9101
Stainless steel leg supports 700 highStainless steel leg supports 900 highUndershield (400mm deep)Undershield to floorCross head BS5412 basin tapsStandard BS5412 basin tapsNon-concussive basin taps
Manufactured from 1mm thick grade 304, satin polished stainless steel, supplied with valance bracket, twotapholes and 32mm combined waste and overflow assembly.
B1201 - Standard Basin
900 approx430
Quarter turn 75mm lever basin tapsQuarter turn 150mm lever basin tapsKnee-operated Valve - wall mountedwith 20 second delaySwan neck spoutThermostatic mixing valve 22mm
T9201T9211K9301
S9401T9622
Manufactured from 1mm thick grade 304, bright polished stainless steel, supplied with valance bracket, twotapholes and 32mm combined waste and overflow assembly.
B1202 - Small Basin
150
490
280 370
Manufactured from 1mm thick grade 304, bright polished stainless steel, supplied with valance bracket, twotapholes and 32mm waste, plug and chain (or combined waste and overflow assembly, on request).
B1203 - Mini Basin
305
260235
900 approx
115
T9102 Non-concussivebasin lever taps
T9011 Standardbasin taps
400900 approx
105320 350
T9101 Non-concussivebasin taps
Page 19Basins
Not to scale June 2010
Optional Extras
Cross head BS5412 basin tapsStandard BS5412 basin tapsNon-concussive basin taps
T8901T9011T9101
Quarter turn 75mm lever basin tapsQuarter turn 150mm lever basin taps
T9201T9211
900 approx
Manufactured from 1mm thick grade 304, satin polished stainless steel, supplied with 60mm long stud bolts,two tapholes and 32mm combined waste and overflow assembly.
Manufactured from 1mm thick grade 304, satin polished stainless steel, supplied with valance bracket, twotapholes and 32mm combined waste and overflow assembly.
105
105
B1206 - Circular Inset Basin
375
B1204 - Corner Basin
320
320
425
375
B1207 - Wall Recessed Basin
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with CP brass push-buttontimed flow control valve, CP brass nozzle, four M8 fixing bolts and 32mm plastic flush grated waste.
300
455
160 330
195
200
T8901 Cross headbasin taps
T9011 Standardbasin taps
Page 20Basins
Not to scale June 2010
Optional Extras
Cross head BS5412 basin tapsStandard BS5412 basin tapsNon-concussive basin taps
T8901T9011T9101
Quarter turn 75mm lever basin tapsQuarter turn 150mm lever basin taps
T9201T9211
Manufactured from 1mm thick grade 304, mirror polished stainless steel, supplied with one taphole and32mm combined waste and overflow assembly.
V1051 - Oval Inset Vanity Bowl
B1205 - Oval Inset Basin
T9011 Standardbasin tap
Page 20aBasins/Inset bowls
Not to scale June 2010
454
529
155
Manufactured from 1mm thick grade 304, mirror polished stainless steel, supplied with 32mm waste and plug.
390
510
155
Manufactured from 1mm thick grade 304, bright polished stainless steel, supplied with 38mm combined wasteand overflow assembly.
B1299 - Inset Sink Bowl
Manufactured from 1mm thick grade 304, bright polished stainless steel, supplied with two tapholes and 38mmcombined waste and overflow assembly .
B1300 - Inset Sink Bowl
150435
365
465
335
150510
400
500
340T8901 Cross headBS5412 basin taps
Optional ExtrasCross head BS5412 basin tapsCross head BS5412 sink tapsStandard BS5412 basin tapsStandard BS5412 sink tapsNon-concussive basin taps
T8901T8903T9011T9012T9101
Manufactured from 1mm thick grade 304, bright polished stainless steel, supplied with 38mm combined wasteand overflow assembly (or no overflow, on request).
B1222 - Square Inset Bowl
Manufactured from 1mm thick grade 304, bright polished stainless steel, supplied with 38mm combined wasteand overflow assembly (or no overflow, on request).
B1224 - Rectangular Inset Bowl
B
A
170
Manufactured from 1mm thick grade 304, bright polished stainless steel, supplied with 38mm combined wasteand overflow assembly (or no overflow, on request).
Vanity Bowls
B1229B1233B1239B1246
290 260330 300390 360460 420
A B
200
360
330
180
330360
235 260
Quarter turn 75mm lever basin tapsQuarter turn 75mm lever sink tapsQuarter turn 150mm lever basin tapsQuarter turn 150mm lever sink taps
T9201T9202T9211T9212
Circular Inset Bowls
Manufactured from 1mm thick grade 304, mirror polished stainless steel, supplied with 32mm waste and plug.
A
V1023V1029V1033V1039V1046
230 200 115290 260 130330 300 140390 360 150460 420 160
A B C
B
C
Not to scale
Page 21Inset Bowls
June 2010
Optional ExtrasT8902T8903T8904T8906
Cross head BS5412 bib tapsCross head BS5412 sink tapsCross head BS5412 sink deck mixerCross head BS1010 3/4” bib taps
Manufactured from 1mm thick grade 304, satin polished stainless steel, supplied with brackets, legs,splashback, hinged bucket grating and combined waste and overflow assembly.
Bucket Sinks
700430
Cross head BS1010 3/4” sink tapsStandard BS5412 sink tapsStandard BS5412 sink deck mixerNon-concussive bib taps
T9103T9012T9013T9103
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with 30mm square tubulargrade 430 stainless steel stand and 38mm waste and plug. Tapholes as required. Utility sinks can be made tosuit individual requirements.
Utility Sinks
A
850
150
490
280 370
D B
300
C
U5701U5702
600 650 540 540 4001000 900 940 790 400
A B C D E
E
60
T8902E2615
Bib taps &Wallplate elbows
T8905 3/4” Sink taps
700400
300
535
400 525
300
B1802 - LargeBucket sink
B1801 - StandardBucket sink 32mm
38mm
Not to scale
Page 22Bucket/Utility Sinks
January 2003
Manufactured from 1mm thick grade 304, satin polished stainless steel, supplied with legs, hinged bucketgrating, combined waste and overflow assemblies and monobloc sink mixer. also available,see Hospital Equipment page 27a.
J0000HTM
J0000 - Janitorial Unit 600x600J0000S - Janitorial Unit 500x600
475
200500/600
600 425
38mm
Not to scale
Page 22aJanitorial Units
June 2010
310
Optional ExtrasB0006B00006L
Stainless steel bucket (12 litres)Stainless steel bucket lid
Manufactured from 1mm thick grade 304, satin polished stainless steel, supplied with legs, hinged bucketgrating, combined waste and overflow assemblies and monobloc sink mixer.
J0001 - Janitorial Unit
600
500
700
300335
180
S2301 - Floor Standing Shower Tray 760x760S2302 - Floor Standing Shower Tray 900x900
Manufactured from 1.2mm thick grade 304, satin polished stainless steel and supplied with removableaccess and 38mm plastic grated waste. Alternative sizes are available, on request.
Manufactured from 1.2mm thick grade 304, satin polished stainless steel and supplied with 38mm plasticgrated waste. Alternative sizes are available, on request.
S2201 - Floor Recessed Shower Tray 760x760S2202 - Floor Recessed Shower Tray 900x900
760/900
760/900 100
40
760/900
760/900 200
Not to scale
Page 23Shower Trays
June 2004
Manufactured from 1.2mm thick grade 304, satin polished stainless steel and supplied with removableaccess (in the tray), tubular curtain rail and 38mm plastic grated waste. The cubicle is double-skinnedand can be supplied as a double or triple unit using one shower tray with an integral rear drainage channeland single waste outlet. Alternative sizes are available, on request.
S24 - Shower Cubicles
900
900
200
Optional Extras
S2599 Closed Top
2300
1800 2700
S2401 - Single
S2402 - Double S2403 - Triple
Not to scale
Page 24Shower Cubicles
June 2004
Manufactured in accordance with HTM64, from 1.2mm thick grade 304, satin polished stainless steel, suppliedwith brackets and 38mm plastic grated waste (in a left, right or central position). Suitable for use with deck-mounted taps and spouts. Available in any length, up to 3000mm, allowing approximately 600mm per person.
H37 - Taplanding Scrub-up Trough
480
Length
25
350
550 approx
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, suppliedwith brackets and 38mm plastic grated waste (in a left, right or central position). Suitable for use with bib spoutsAvailable in any length, up to 3000mm, allowing approximately 600mm per person.
in accordance with HTM64,
H38 - Splashback Scrub-up Trough
250
350
550 approx
465
Length
440
Optional ExtrasL1799T9201T9204T9211T9214
Stainless steel leg supportsQuarter turn 75mm lever basin tapsQuarter turn 75mm lever bib tapsQuarter turn 150mm lever basin tapsQuarter turn 150mm lever bib taps
Knee operated valve - wall-mountedwith 20 second timed delayBib spoutThermostatic mixing valve 22mm
K9301
S9402T9622
Hot water
Cold water
Thermostatic mixing valvePre-mixed water
75
60
T9211 Lever basin taps
S9402 Bib spout
K9301 Knee valve
Concealed hangerbrackets
Not to scale
Page 25Hospital Equipment
June 2010
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, suppliedwith brackets and 38mm plastic grated waste (in a left, right or central position). Suitable for use with wall-mountedtaps. Available in any length, up to 3000mm, allowing approximately 600mm per person.
in accordance with HTM64,
H39 - Standard Scrub-up Trough
Optional ExtrasL1799B1001T3994T3995C1196G1000
Stainless steel leg supportsBucket grating110mm stainless steel pushfit P trap110mm plastic pushfit P trapSt/steel h/l cistern & flushpipeOutlet Grating
Quarter turn 75mm lever sink tapsQuarter turn 75mm lever sink deck mixerQuarter turn 75mm lever bib tapsQuarter turn 150mm lever sink tapsQuarter turn 150mm lever sink deck mixerQuarter turn 150mm lever bib taps
T9202T9203T9204T9212T9213T9214
440
Length
100
350
550 approx
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, suppliedwith anti-drip edges, brackets, top or back inlet 38mm flushpipe connection, 110mm spigot soil outlet and 38mmcombined waste and overflow assembly. Alternative sizes available on request.
in accordance with HTM64,
H3001 - Combined Sink/Slop Hopper (top inlet)H3002 - Combined Sink/Slop Hopper (back inlet)
600
1600
900 approx
250365
125500
330
1000.
295
400
T9204E2615
Bib tap &Wallplate elbow
C1196 Cistern
T9213 Lever mixer
L1799 Leg supports
H3001 - top inlet
Not to scale
Page 26Hospital Equipment
June 2010
Optional ExtrasL1799B1001T3994T3995G1000
Stainless steel leg supportsBucket grating110mm stainless steel pushfit P trap110mm plastic pushfit P trapOutlet Grating
High level stainless steel cistern andflushpipe with chain pullLow level concealed plastic cistern andflushpipe with std lever kit
C1196
C1193
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, suppliedwith anti-drip edges, brackets, top or back inlet 38mm flushpipe connection and 110mm spigot soil outlet.Alternative sizes available on request.
in accordance with HTM64,
H3201 - Wall Mounted Slop Hopper (top inlet)H3202 - Wall Mounted Slop Hopper (back inlet)
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, suppliedwith anti-drip edges, brackets, top or back inlet 38mm flushpipe connection and 110mm spigot soil outlet.Alternative sizes available on request.
in accordance with HTM64,
H3101 - Combined Slop Hopper/Drainer (top inlet)H3102 - Combined Slop Hopper/Drainer (back inlet)
600
600
330
900 approx
250
900 approx
250
600
1000
330
365
125
365
125
295
1000
310
315
L1799 Leg supports
C1193 Low level concealedplastic cistern & flushpipewith standard lever kit
B1001 Bucket grating
T3984 Stainless steelpushfit trap
C1196 High level stainlesssteel cistern and flushpipewith chain pull
H3202 - back inlet
H3101 - top inlet
Not to scale
Page 27Hospital Equipment
L1799 Leg supports
June 2010
Optional ExtrasBucket grating110mm stainless steel pushfit P trap110mm plastic pushfit P trapOutlet Grating
B1001T3994T3995G1000
High level stainless steel cistern andflushpipe with chain pullLow level concealed plastic cistern andflushpipe with std lever kit
C1196
C1193
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, suppliedwith top or back inlet 38mm flushpipe connection and 110mm spigot soil outlet.
in accordance with HTM64,
H3401 - Floor Standing Slop Hopper (top inlet)H3402 - Floor Standing Slop Hopper (back inlet)
600
600
330
600365
125
295
1000
C1196 High level stainless steel cisternand flushpipe with chain pull
H3401 - top inlet
Not to scale
Page 27aHospital Equipment
June 2010
B1001 Bucket grating
425
475
Manufactured from 1mm thick grade 304, satin polished stainless steel, supplied withlegs, hinged bucket grating, combined waste and overflow assemblies and QT lever monobloc sink mixer.
in accordance with HTM64,
200
38mm
J0000HTM - Janitorial Unit
600
310
500
Optional ExtrasL1799T9202T9203
Stainless steel leg supportsQuarter turn 75mm lever sink tapsQuarter turn 75mm lever sink deck mixer
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, suppliedwith anti-drip edges, brackets and 38mm combined waste and overflow assembly. Tapholes as required.
in accordance with HTM64,
H3601 - Hospital Sink - Single
600
600
400
30
900 approx
250250
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, suppliedwith anti-drip edges, brackets and 38mm combined waste and overflow assemblies. Tapholes as required.
in accordance with HTM64,
H3602 - Hospital Sink - Double
600
1200
40030
900 approx
250
500
Quarter turn 150mm lever sink tapsQuarter turn 150mm lever sink deck mixer
T9212T9213
L1799 Leg supports
T9202 Quarter turn75mm lever sink taps
T9212 Quarter turn150mm lever sink taps
Not to scale
Page 28Hospital Equipment
600
1200
300
250
500
250
H3301 - Plaster SinkManufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied withanti-drip edges, brackets and 38mm standpipe strainer waste and plug. A sump containing a pull-out basket andcover is fitted to the bowl. Tapholes as required.
in accordance with HTM64,
30
900 approx
200
200400
500
T9202 Quarter turn75mm lever sink taps
June 2010
Optional ExtrasL1799T8901T9011
Stainless steel leg supports (for top only)Cross head BS5412 basin tapsStandard BS5412 basin taps
Non-concussive basin tapsQuarter turn 75mm lever basin tapsQuarter turn 150mm lever basin taps
T9101T9201T9211
Manufactured from 1.2mm thick grade 304, satin polished stainless steel with 300mm diameter bowls, 32mmcombined waste and overflow assembly, tapholes as required, 30mm square tubular, grade 430 stainless steelstand and adjustable feet. Vanitory Units and Tops are made to suit individual needs, and are available in anylength, up to 2875mm, allowing approximately 500mm per person.
Vanitory Units and Tops
500300
Length (1000)
Removable access
60
170
250
480 900
Recessed kick strip
V1292 - Vanitory Unit
Vanitory Units
Vanitory Tops
V1291V1292V1293V1294V1295V1296
V1291TV1292TV1293TV1294TV1295TV1296T
- with one bowl (500mm wide)- with two bowls (1000mm wide)- with three bowls (1500mm wide)- with four bowls (2000mm wide)- with five bowls (2500mm wide)- with six bowls (2875mm wide)
- with one bowl (500mm wide)- with two bowls (1000mm wide)- with three bowls (1500mm wide)- with four bowls (2000mm wide)- with five bowls (2500mm wide)- with six bowls (2875mm wide)
T9011 Standard basin taps
100
Page 29Vanitory Units
Not to scale June 2010
Manufactured from 1.2mm thick grade 304, satin polished stainless steel with a flat flange which can b fixedinto a worktop with a strong adhesive, like ‘gripfil’ or ‘silicone’.
Inset Sink Bowls
440
400A
540
400A
648
460 A
440
495
440 B4425B4430
210300
A
B5425B5430
250300
A
B6430 300
A
400
500
610
Optional ExtrasCross head BS5412 sink tapsCross head BS5412 sink deck mixerCross head BS1010 3/4” sink tapsStandard BS5412 sink tapsStandard BS5412 sink deck mixer
T8903T8904T8905T9012T9013
Standard BS5412 sink monobloc mixerQuarter turn 75mm lever sink tapsQuarter turn 75mm lever sink deck mixerQuarter turn 150mm lever sink tapsQuarter turn 150mm lever sink deck mixer
T9014T9202T9203T9212T9213
Supplied with 38mm combined waste & overflow assembly(standpipe strainer waste & plug can be supplied at extra cost).
Supplied with 38mm combined waste & overflow assembly(standpipe strainer waste & plug can be supplied at extra cost).
Supplied with 38mm standpipe strainer waste & plug(can be fitted with 38mm combined waste & overflow assembly).
Page 30Inset Sink Bowls
Not to scale June 2010
Optional Extras
S0106S0109S0112
Speed rail 600x100mmSpeed rail 900x100mmSpeed rail 1200x100mm
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with 30mm square tubulargrade 430 stainless steel stand, adjustable feet, undershelf, removable partitions and 32mm waste and plug.Alternative sizes are available, on request.
Ice Sink Units
Condiment set (sits in Ice Chest)Blender shelf 600x150mmTowel rail 600x20mm diameter
C0990B1560T2260
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with a loose lid and 32mmwaste and plug. Alternative sizes are available, on request.
I5901 - Single Inset Ice Sink
A 850
430 500
B
I5801I5802I5803
400 340 1 partition600 540 2 partitions800 740 3 partitions
A B
300
250
350
270
350
30mm thickinsulation
10 flange
30mm thickinsulation
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with one loose lid and32mm waste and plug. Alternative sizes are available, on request.
I5902 - Double Inset Ice Sink
660
270350
10 flange
30mm thickinsulation
580
100
350
350
Page 31Ice Sinks
Not to scale January 2003
Mini Sink Units
Optional Extras
400
500
340 500
900
200
250
400
1000
340 500
400
Length
340 500
100
20 60
Manufactured from 1.2mm thick grade 304, satin polished stainless steel with 400x340x200mm deep bowl,38mm combined waste & overflow assembly, tapholes as required, 30mm square tubular, grade 430 stainlesssteel stand and adjustable feet (with or without undershelf). Standard overall size can be altered andalternative bowl sizes, are available.
B6505
B6505T
Mini Sink SB Unit
Mini Sink SB Top- (sit-on or inset)
B6510
B6510T
Mini Sink SBSD Unit
Mini Sink SBSD Top- (sit-on or inset)
NB: left or right hand drainer
B6515B6518
B6515TB6518T
Mini Sink DBDD Unit
Mini Sink DBDD Top
- 1500mm long- 1800mm long
- 1500mm long (sit-on or inset)- 1800mm long (sit-on or inset)
250x250x200 deep335x235x180 deep330x330x200 deep350x290x200 deep400x290x200 deep
Alternative bowl sizes available:
25 flange
Inset
Not to scale
Page 32Mini Sink Units
June 2010
Cut outEnd upstandCross head BS5412 sink tapsCross head BS5412 sink deck mixerCross head BS1010 3/4” sink tapsStandard BS5412 sink taps
C6893U6897T8903T8904T8905T9012
Standard BS5412 sink deck mixerStandard BS5412 sink monobloc mixerQuarter turn 75mm lever sink tapsQuarter turn 75mm lever sink deck mixerQuarter turn 150mm lever sink tapsQuarter turn 150mm lever sink deck mixer
T9013T9014T9202T9203T9212T9213
Standard Sink Units
610
740
460
900
300
250
610
1500
460 650
100
2060
Optional Extras
650
Manufactured from 1.2mm thick grade 304, satin polished stainless steel with 610x460x300mm deep bowls,38mm standpipe strainer waste, tapholes as required, 30mm square tubular, grade 430 stainless steel standand adjustable feet (with or without undershelf). Standard overall size can be altered and alternative bowlsizes are available.
S6017
S6017T
Standard SB Sink Unit
Standard SB Sink Top- (sit-on or inset)
610
Length
460 650
S6115
S6115T
Standard DB Sink Unit
Standard DB Sink Top- (sit-on or inset)
S6210S6212S6215S6218
S6210TS6212TS6215TS6218T
Standard SBSD Sink Unit
Standard SBSD Sink Top
- 1000mm long- 1200mm long- 1500mm long- 1800mm long
- 1000mm long (sit-on or inset)- 1200mm long (sit-on or inset)- 1500mm long (sit-on or inset)- 1800mm long (sit-on or inset)
NB: left or right hand drainer
Cut outEnd upstandCross head BS5412 sink tapsCross head BS5412 sink deck mixerCross head BS1010 3/4” sink tapsStandard BS5412 sink taps
C6893U6897T8903T8904T8905T9012
Standard BS5412 sink deck mixerStandard BS5412 sink monobloc mixerQuarter turn 75mm lever sink tapsQuarter turn 75mm lever sink deck mixerQuarter turn 150mm lever sink tapsQuarter turn 150mm lever sink deck mixer
T9013T9014T9202T9203T9212T9213
400x400x250 deep400x400x300 deep500x400x250 deep500x400x300 deep610x460x250 deep
Alternative bowl sizes available:
25 flange
Inset
Page 33Standard Sink Units
Not to scale June 2010
650
610
1800
460
Standard Sink Units (continued)
610
Length
460 650
610
Length
460 650
Optional ExtrasCut outEnd upstandCross head BS5412 sink tapsCross head BS5412 sink deck mixerCross head BS1010 3/4” sink tapsStandard BS5412 sink taps
C6893U6897T8903T8904T8905T9012
T9013T9014T9202T9203T9212T9213
Standard BS5412 sink deck mixerStandard BS5412 sink monobloc mixerQuarter turn 75mm lever sink tapsQuarter turn 75mm lever sink deck mixerQuarter turn 150mm lever sink tapsQuarter turn 150mm lever sink deck mixer
S6318
S6318T
Standard SBDD Sink Unit
Standard SBDD Sink Top- (sit-on or inset)
S6418S6424
S6418TS6424T
Standard DBSD Sink Unit
Standard DBSD Sink Top
- 1800mm long- 2400mm long
- 1800mm long (sit-on or inset)- 2400mm long (sit-on or inset)
NB: Left or right hand drainer
S6524S6530S6535
S6524TS6530TS6535T
Standard DBDD Sink Unit
Standard DBDD Sink Top
- 2400mm long- 3000mm long- 3500mm long
- 2400mm long (sit-on or inset)- 3000mm long (sit-on or inset)- 3500mm long (sit-on or inset)
Page 34Standard Sink Units
Not to scale January 2003
Large Sink Units
760
900
510
900
300
250
760
1800
510 700
100
2060
Optional Extras
700
Manufactured from 1.2mm thick grade 304, satin polished stainless steel with 760x510x300mm deep bowls,38mm standpipe strainer waste, tapholes as required, 30mm square tubular, grade 430 stainless steel standand adjustable feet (with or without undershelf). Standard overall size can be altered and alternative bowlsizes are available.
S7017
S7017T
Large SB Sink Unit
Large SB Sink Top- (sit-on or inset)
760
Length
510 700
S7115
S7115T
Large DB Sink Unit
Large DB Sink Top- (sit-on or inset)
S7212S7215S7218
S7212TS7215TS7218T
Large SBSD Sink Unit
Large SBSD Sink Top
- 1200mm long- 1500mm long- 1800mm long
- 1200mm long (sit-on or inset)- 1500mm long (sit-on or inset)- 1800mm long (sit-on or inset)
NB: left or right hand drainer
Cut outEnd upstandCross head BS5412 sink tapsCross head BS5412 sink deck mixerCross head BS1010 3/4” sink tapsStandard BS5412 sink taps
C6893U6897T8903T8904T8905T9012
Standard BS5412 sink deck mixerStandard BS5412 sink monobloc mixerQuarter turn 75mm lever sink tapsQuarter turn 75mm lever sink deck mixerQuarter turn 150mm lever sink tapsQuarter turn 150mm lever sink deck mixer
T9013T9014T9202T9203T9212T9213
400x400x250 deep400x400x300 deep500x400x250 deep500x400x300 deep610x460x250 deep610x460x300 deep760x510x380 deep
Alternative bowl sizes available:
25 flange
Inset
Page 35Large Sink Units
Not to scale June 2010
700
760
Length
510
Large Sink Units (continued)
760
2400
510 700
760
Length
510 700
Optional ExtrasCut outEnd upstandCross head BS5412 sink tapsCross head BS5412 sink deck mixerCross head BS1010 3/4” sink tapsStandard BS5412 sink taps
C6893U6897T8903T8904T8905T9012
Standard BS5412 sink deck mixerStandard BS5412 sink monobloc mixerQuarter turn 75mm lever sink tapsQuarter turn 75mm lever sink deck mixerQuarter turn 150mm lever sink tapsQuarter turn 150mm lever sink deck mixer
T9013T9014T9202T9203T9212T9213
73187324
7318T7324T
Large SBDD Sink Unit
Standard SBDD Sink Top
- 1800mm long- 2400mm long
- 1800mm long (sit-on or inset)- 2400mm long (sit-on or inset)
S7424
S7424T
Large DBSD Sink Unit
Large DBSD Sink Top
- 2400mm long
- 2400mm long (sit-on or inset)
NB: Left or right hand drainer
S7530S7535
S7530TS7535T
Large DBDD Sink Unit
Large DBDD Sink Top
- 3000mm long- 3500mm long
- 3000mm long (sit-on or inset)- 3500mm long (sit-on or inset)
Not to scale
Page 36Large Sink Units
June 2004
Manufactured from 1.2mm thick grade 304, satin polished stainless steel with 38mm standpipe strainer wasteassembly in the washbowl, tapholes as required and 30mm square tubular, grade 430 stainless steel stand andadjustable feet with or without shelf under the sinkbowl. The insulated heated bowl has an insulated lid, 38mmwaste with lever operated drain valve, removable trivet over immersion heater and thermostat, whichrequire a 220/240v 50hz single phase supply via a fused spur.
Hot Rinse Sink Units
900
300
250
100
20 60
760
3300
510 700
610
2400
460
380
700
330460
760
S6624 - Standard Hot Rinse Sink Unitwith 4kw immersion heater, requiringa 20amp fused spur.
S6633 - Large Hot Rinse Sink Unitwith 6kw immersion heater, requiringa 30amp fused spur.
Optional ExtrasCut outEnd upstandCross head BS5412 sink tapsCross head BS5412 sink deck mixerCross head BS1010 3/4” sink tapsStandard BS5412 sink taps
C6893U6897T8903T8904T8905T9012
Standard BS5412 sink deck mixerStandard BS5412 sink monobloc mixerQuarter turn 75mm lever sink tapsQuarter turn 75mm lever sink deck mixerQuarter turn 150mm lever sink tapsQuarter turn 150mm lever sink deck mixer
T9013T9014T9202T9203T9212T9213
Page 37Hot Rinse Sink Units
Not to scale June 2010
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with 30mm square tubulargrade 430 stainless steel stand with adjustable feet and undershelf. Available in any length up to 2875mm.Standard width and height can be altered.
Tables
Optional ExtrasAdditional strengthening (for machines etc.)DrawerDrawer with lockFour standard duty castors (two braked)Four heavy duty castors (two braked)
S6892D6894D6895C5599C5597
Additional undershelfCut outMitred cornerEnd upstand
D6898C6893C8390U6897
900
900
250
Length
650
100
250
Length
650
60
Manufactured from 1.2mm thick grade 430, satin polished stainless steel, supplied with brackets. Wall shelvesare available in any length up to 2875mm and the standard width can be altered.
Shelves
Length
300 50 35
250
600
450
30
350
W75 - Wall shelf
M0166 - Microwave shelf(available in any size, to)suit the Microwave)
T67 - Wall table
T66 - Centre table
Page 38Tables/Shelves
Not to scale June 2010
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with or without sliding orhinged doors, 30mm square tubular grade 430 stainless steel frame, adjustable feet and intermediate shelf.Available in any length, from 600 to 2400mm. Standard width and height, can be altered.
C70 - Floor Cupboard (ambient - no doors)C71 - Floor Cupboard (with sliding or hinged doors)
Optional Extras
L7499S6898
Hinged or sliding door lockAdditional shelf
C72 - Wall Cupboard (ambient - no doors)C73 - Wall Cupboard (with sliding or hinged doors)
Length
900
150
650
Length 600
300
Four standard duty castors (two with brake)Four heavy duty castors (two with brake)
C5599C5597
Manufactured from 1.2mm thick grade 304, satin polished stainless steel, supplied with or without sliding orhinged doors, 30mm square tubular grade 430 stainless steel frame and intermediate shelf. Available in anylength, from 600 to 1500mm. Standard width and height, can be altered.
Fixing heightas required
Also available for fitting under a Catering Sink Top:C74 - Sink Cupboard (ambient - no doors)C75 - Sink Cupboard (with sliding or hinged doors)
Not to scale
Page 39Cupboards
June 2010
Manufactured from 1.2mm thick grade 304, satin polished stainless steel. It has a capacitor start, brushlessmotor, centrifugal fan and fully-supported, spiral wound, heating element, rated at 2.4kW with automatic re-setoverload protection and is automatically operated by an infra-red sensor and associated circuitry with automaticsafety cut-out after 70 seconds continuous running. Supply should be 220/240V, 50Hz, single phase and thehand drier connected to the final subcircuit via a double-pole isolator switch, fused at 13A.
A8601 - Non-touch Hand Drier
Cable entry at bottom(also at rear)
270
280 146
Manufactured from 0.76mm thick grade 304, satin polished stainless steel with a lockable, bottom-hinged front,that swings open fully for easy servicing and dispenses 300 to 500, multi-fold or C-fold paper towels.
A8602 - Paper Towel Dispenser
389
102
279
356
457152
Manufactured from 0.76mm thick grade 304, satin polished stainless steel. with hinged lid is also available.A8610
A8609 - Waste Bin
Not to scale
Page 40Accessories
June 2008
Manufactured from 0.76mm thick grade 304, satin polished stainless steel with a lockable, removable, frontcover for easy servicing. A 220mm pack gives 300m single sheet or 210m double sheet.
A8613 - Mini Jumbo Toilet Roll Holder
Manufactured from 0.76mm thick grade 304, satin polished stainless steel with a lockable, bottom-hingedfront, that swings open fully for easy servicing.
A8606 - Toilet Tissue Dispenser
280111
134
265 120
A8616 - Napkin Disposal BinManufactured from 0.76mm thick grade 304, satin polished stainless steel with a hinged lid and lockable,hinged bottom for easy servicing (removal of liner).
A8615 - Double Toilet Roll HolderManufactured from 0.76mm thick grade 304, satin polished stainless steel with a lockable, front cover foreasy servicing. Holds two 114x114 standard core toilet rolls. recessed model is also available.A8615R
264
141
137
105
203
296
Not to scale
Page 41Accessories
January 2003
Manufactured from 1.2mm thick grade 304, mirror polished stainless steel with four fixing holes. Pleaseensure the mirrors are fixed to a flat surface, or distortion will occur. Any size is available on request.
Stainless Steel Mirrors
Manufactured from 0.91mm thick grade 304, satin polished stainless steel with concealed fixings.
A8607 - Soap Shelf
Manufactured from 0.91mm thick grade 304, satin polished stainless steel with a chromium-plated brassvalve (with stainless steel moving parts), key-operated filler cap, lexan level indicator and 1.2 litre capacity.An vertical model is also available.A8603V
A8603 - Liquid Soap Dispenser
76 57
121
206
60
105 105
A8611 - Liquid Soap DispenserManufactured from chromium-plated brass (with stainless steel moving parts),designed for top filling, with a 0.5 litre polyethylene container. A 25mm hole isrequired for installation through a maximum mounting thickness of 102mm.
102
57
375
200
64
Page 42Accessories
Not to scale
Manufactured from 0.91mm thick grade 304, satin polished stainless steel with concealed fixings..
Robe Hooks
50
50
10050
A8617single
A8617Ddouble
January 2003
Manufactured from 35mm diameter,1.2mm thick, grade 304, bright polished stainless steel tube with 1.5mmthick fixed flanges. Alternative sizes, available on request.
Standard Grab Rails
G8806 - Angled Grab Rail
G8808 - Padded Backrest
90 35
Manufactured from 35mm diameter,1.2mm thick, grade 304, bright polished stainless steel tube with 1.5mmthick fixed flanges and white plastic upholstered, foam pad.
3590160
300 400
40
250
Manufactured from 35mm diameter,1.2mm thick, grade 304, bright polished stainless steel tube with 2mmthick fixed flanges. Alternative sizes, available on request.
Length
300
300
135 degrees 515
215
90
35
90
90
G8801G8802G8803G8804G8805
- 300mm long- 450mm long- 600mm long- 750mm long- 900mm long
Page 43Grab Rails
Not to scale January 2003
Manufactured from 35mm diameter,1.2mm thick, grade 304, bright polished stainless steel tube with 1.5mmthick fixed flanges. Alternative sizes, available on request.
G8809 - Hingedown Grab RailG8810 - Hingedown Grab Rail (with toilet roll holder)
Manufactured from 35mm diameter,1.2mm thick, grade 304, bright polished stainless steel tube with 2mmthick fixed flanges.
750
930
294
105230
G8811 - Vertical PoleG8812 - Vertical Pole and Stay
35902440
760
2440
460
G8809
G8810
G8811 G8812
Page 44Grab Rails
Not to scale January 2003