ww
w.loctite.com
The Adhesive SourcebookVolum
e 5Except as otherwise noted, all trademarks in this catalog are trademarks of Henkel Corporation in the U.S. and elsewhere.
® denotes a trademark registered in the U.S. Patent and Trademark Office.
Krytox is a registered trademark of E.I. DuPont de Nemours Co., Inc.
NSF is a trademark of NSF International.
CSA is a trademark of CSA International.
UL is a trademark of Underwriter’s Laboratories, Inc.
© Copyright 2005. Henkel Corporation. All rights reserved.
Printed in U.S.A.
2443/LT-3355 12/04
Material Safety Data Sheets andTechnical Data Sheets also available by 24-hour fax. In the U.S.A., 1.800.LOCTITE (562.8483).In Canada, 1.800.263.5043.
For information on ManufacturingReliability Training call: 1.800.LOCTITE (562.8483) (U.S.A.)1.800.263.5043 (Canada)
Loctite® brand productsfor design, assembly,manufacturing, andmaintenance
USAFor your local Loctite® brand Adhesives and Sealants Specialist, call:1.800.323.5106
For your nearest authorized Loctite® branddistributor, to arrange an in-plant seminar orfor technical product assistance, call:1.800.LOCTITE (1.800.562.8483)
To place an order, call:1.800.243.4874
Henkel Corporation1001 Trout Brook CrossingRocky Hill, Connecticut 06067 860.571.5100Fax: 860.571.5465
CanadaFor your local Loctite® brand Adhesives and Sealants Specialist, for your nearestauthorized Loctite® brand distributor, toarrange an in-plant seminar, for technicalproduct assistance or to place an order, call:1.800.263.5043 (within Canada)
Henkel Canada Corporation2225 Meadowpine Blvd.Mississauga, Ontario L5N 7P2Tel: 905.814.6511Fax: 905.814.53911.800.263.5043 (within Canada)
MexicoFor your local Loctite® brand Adhesives and Sealants Specialist, for your nearestauthorized Loctite® brand distributor, toarrange an in-plant seminar or for technicalproduct assistance, call:01.800.90.181.00 (within Mexico)
To place an order, call:01.800.84.994.12 (within Mexico)
Henkel Capital, S.A. de C.V.Calzada de la Viga s/n Fracc. Los LaurelesLoc. Tulpetlac, C.P. 55090Ecatepec de Morelos, Edo. de MéxicoTel: 011.52.55.5836.1300Fax: 011.52.55.5787.9004
Central AmericaFor your local Loctite® brand Adhesives and Sealants Specialist, for your nearestauthorized Loctite® brand distributor, toarrange an in-plant seminar, for technicalproduct assistance or to place an order, call:506.277.4868
Henkel Costa Rica Ltda.San Joaquin de FloresHeredía, Costa RicaTel: 506.277.4800Fax: 506.277.4883
South AmericaFor your local Loctite® brand Adhesives and Sealants Specialist, for your nearest authorizedLoctite® brand distributor, to arrange an in-plantseminar, for technical product assistance or toplace an order, contact:
Henkel Ltda.Rua Karl Huller, 136 – Jd.Canhema 09941-410 Diadema/SP, BrazilTel: 55.11.4075.8955Fax: 55.11.4075.88870800.12.23.34 (within Brazil)
Henkel Argentina S.A. Tte. Cnel. Magán 1990 – Sarandi(B1872HRN) Avellanda, Buenos Aires, ArgentinaTel: 54.11.4001.0100Fax: 54.11.4205.34420800.33.30213 (within Argentina)
Henkel Chile Ltda.Av. Apoquindo 3355, Oficina 8 – 1º PisoLas Condes, Santiago, ChileTel: 56.2.2333606Fax: 56.2.2341448800.212002 (within Chile)
Henkel Colombiana S.A. Calle 17 No. 68-B-73, Bogotá D.C., ColombiaTel: 571.423.9000Fax: 571.425.133101.800.01.14173 (within Colombia)
Henkel Venezolana S.A. Zona Industrial PruincaCalle 2 Parcela 31 y 32 Guacara – Edo Carabobo, VenezuelaTel: 5824.5560.2611Fax: 5824.5560.26600800.436.5300 (within Venezuela)
The Adhesive Sourcebook contains over 1,400products in total! Put them to work to make thingsbetter, faster, and more cost efficient. Loctite®
brand products will help you tackle the toughestchallenges the world can throw your way.
Organized into four major categories:
■ Assembly Products – For virtually any industrial application
■ Medical Products – Distinctive line for medical device assemblies
■ Maintenance & Repair – Wide range of products for maintenance, repair and operational needs
■ Equipment – Adhesive dispensing and curing systems
Throughout The Adhesive Sourcebook, easy-to-useproduct selection guides will help you narrow thesearch for the right solution to your design,assembly, maintenance, or repair requirements.
Call us at 1.800.LOCTITE (562.8483) in the U.S.and 1.800.263.5043 in Canada
■ For technical product assistance
■ For local application assistance from the Henkel Adhesives and Sealants Specialist in your area
■ For the name of your nearest distributor authorized to sell Loctite® brand products
■ For access to the Henkel Auto-Fax system to obtain product data sheets or material safety data sheets
The Adhesive SourcebookThe complete source on Loctite® brand adhesives, sealants, lubricants, coatings,dispensing and curing equipment available only from Henkel Corporation.
At Henkel Corporation, we invent more than just quality Loctite® brand products, we providesolutions to the industries’ biggest challenges. Whether we are reducing assembly cost, providingdesign and application assistance, or increasing the reliability of your process, Henkel is dedicatedto earning and keeping the trust of our customers. Through this philosophy, Henkel has assumed aposition of worldwide leadership.
Trust Henkel Corporation to be your sole source for design assistance, application assistance, and after-the-sale support.
In addition to support from your local Henkelrepresentative, The Adhesive Sourcebook is alsosupported by www.loctite.com – a virtual adhesive librarydesigned to give you the best technical electronic supportin the industry. Available at your convenience, from yourdesktop, log on to our web site to obtain the following:
E-CATALOGGain quick and easy access to product descriptions,approvals/specifications, application suggestions, packagespecifications, and technical and material safety data.
APPLICATION ASSISTANCEApplication assistance will aid in narrowing the range ofproducts suitable for your design and maintenance needs.Or send a message to your local Adhesives and SealantsSpecialist to arrange “in person” assistance.
DISTRIBUTOR LOCATORFind a local distributor in the U.S. or Canada that has theproduct you need. All it takes is a zip code.
DATA SHEETS & LITERATUREInstant access to technical and material safety datasheets. View electronic versions of our design guides,bonding guides, quick reference tools, and other specialliterature available.
WHAT’S NEWFind out about new product introductions, feature articles,trade show schedules, and application success stories.Register on-line for adhesives seminars or ManufacturingReliability Training classes in your area.
1
CO
NT
EN
TS
AGENCY APPROVALSA complete listing of Loctite® brand products approved by various regulatory agencies . . . . . . . . . . . . . . . . . . . . 2–3
ENGINEERING SERVICESEngineering Services . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5
ASSEMBLY PRODUCTSBonding
Bonding Selector Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–7Acrylic Adhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–11Cyanoacrylate Adhesives . . . . . . . . . . . . . . . . . . . . . . . . 12–15Epoxy & Urethane Adhesives . . . . . . . . . . . . . . . . . . . . . 16–21Fiber Optic Adhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . 22–23Hot Melt Adhesives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24–27Light Cure Adhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . 28–31
GasketingGasketing Selector Guide . . . . . . . . . . . . . . . . . . . . . . . . 32–33Anaerobic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34–35Silicone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36–37
Potting & EncapsulatingPotting & Encapsulating Selector Guide . . . . . . . . . . . . . 38–39Epoxy & Polyurethane Compounds . . . . . . . . . . . . . . . . 40–44Hot Melt Adhesives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Silicone Potting Compounds . . . . . . . . . . . . . . . . . . . . . . . . 45
Retaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46–47Surface Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . 48–49Threadlocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50–53Thread Sealing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54–57
MEDICAL PRODUCTSBonding
Medical Device Adhesives . . . . . . . . . . . . . . . . . . . . . . . 58–61
MAINTENANCE & REPAIR PRODUCTSAdhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62–63Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64–67Anti-Slip Coatings . . . . . . . . . . . . . . . . . . . . . . . . . . . 68–69Belt Repair/Urethanes. . . . . . . . . . . . . . . . . . . . . . . . . 70–71Cleaners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–75Coatings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76–77Epoxies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78–81Flooring & Grout . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82–83Gasketing & Sealing . . . . . . . . . . . . . . . . . . . . . . . . . . 84–87Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88–91Machining Compounds . . . . . . . . . . . . . . . . . . . . . . . . 92–93Retaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94–95Threadlocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96–97Thread Sealing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98–99Wearing Compounds . . . . . . . . . . . . . . . . . . . . . . . . 100–103Special Products. . . . . . . . . . . . . . . . . . . . . . . . . . . 104–105
EQUIPMENTDispensing
Hand Held Applicators, Hot Melt Applicators, Bulk Hot MeltSystems, Cartridge Systems, Complete Dispense Systems,Syringe Accessories, Controllers & Reservoirs, Valves–HandHeld, Valves/Pumps, Dispense Tips, Monitoring Systems, In-Line Flow Monitors . . . . . . . . . . . . . . . . . . . . . . . . 106–119
Motion Control Dispense SystemsRobots, Dispense Stations . . . . . . . . . . . . . . . . . . . . . 120–121
Fume Filtration Systems . . . . . . . . . . . . . . . . . . . . . . . . . 122
Light Cure SystemsLED Light Sources, Wand Systems, Flood Systems, Cure Conveyers, Light Sources & Power Supplies, Cure Chambers, Light Meters . . . . . . . . . . . . . . . . . . 123–129
Custom Equipment, Impregnation Systems & Rental Program . . . . . . . . . . . . . . . . . . . . . . . . . . 130–131
DID YOU KNOW?Did You Know? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132–133
INDEXIndex
By Product/Item Number . . . . . . . . . . . . . . . . . . . . . . 134–147By Brand Name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148–149
NSF InternationalLoctite® H4000™ Speedbonder™ Structural Adhesive, Non-SagLoctite® 55™ Pipe Sealing CordLoctite® 222MS™ Threadlocker, Low Strength/Small ScrewLoctite® 242® Threadlocker, Medium StrengthLoctite® 243™ Threadlocker, Medium Strength/Oil ResistantLoctite® QuickStix™ 248™ Threadlocker, Medium Strength/RemovableLoctite® 262™ Threadlocker, Medium to High StrengthLoctite® 290™ Threadlocker, Wicking GradeLoctite® 480™ Prism® Instant Adhesive, Black/ToughenedLoctite® 518™ Gasket Eliminator® Flange SealantLoctite® QuickStix™ 561™ PST® Pipe Sealant Loctite® 564™ Thread Sealant, General PurposeLoctite® 565™ PST® Thread Sealant, Controlled StrengthLoctite® 587™ Blue, High Performance RTV Silicone Gasket MakerLoctite® 680™ Retaining Compound, Slip Fit/High StrengthLoctite® 5900® Flange Sealant, Heavy Body RTV SiliconeLoctite® 7649™ Primer N™Loctite® Food Grade Anti-SeizeLoctite® Food Grade GreaseLoctite® No More Leaks™, Plastic Pipe SealantLoctite® ODC-Free Cleaner & DegreaserLoctite® Superflex® RTV, Silicone Adhesive Sealants (Black, Clear, White)Loctite® ViperLube® Clear High Performance Synthetic GreaseLoctite® ViperLube® High Performance Synthetic GreaseLoctite® ViperLube® High Performance Synthetic Lubricant, Gear OilsLoctite® ViperLube® High Perf. Synthetic Lubricant, Lightweight Oils
American Bureau of Shipping (ABS)Loctite® 242® Threadlocker, Medium StrengthLoctite® 262™ Threadlocker, Medium to High StrengthLoctite® 404™ Quick Set™ Instant Adhesive, General PurposeLoctite® 454™ Prism® Instant Adhesive, Surface Insensitive GelLoctite® 495™ Super Bonder® Instant AdhesiveLoctite® 545™ Thread Sealant, Hydraulic/Pneumatic FittingsLoctite® 567™ PST® Thread Sealant, High TemperatureLoctite® 587™ Blue, High Performance RTV Silicone Gasket MakerLoctite® 598™ Black, High Performance RTV Silicone Gasket MakerLoctite® 620™ Retaining Compound, Slip Fit/High TemperatureLoctite® 680™ Retaining Comp., Slip Fit/High StrengthLoctite® Extend® Rust TreatmentLoctite® Fixmaster® Aluminum LiquidLoctite® Fixmaster® Aluminum PuttyLoctite® Fixmaster® Poxy Pak™, Fast Cure EpoxyLoctite® Fixmaster® Fast Set Steel PuttyLoctite® Fixmaster® Flex 80™ PuttyLoctite® Fixmaster® Marine ChockingLoctite® Fixmaster® Stainless Steel PuttyLoctite® Fixmaster® Steel LiquidLoctite® Fixmaster® Steel PuttyLoctite® Fixmaster® Wear Resistant PuttyLoctite® Fixmaster® Wet Surface Repair PuttyLoctite® Marine Grade Anti-SeizeLoctite® Nickel Anti-SeizeLoctite® Nordbak® Brushable Ceramic-GreyLoctite® Nordbak® Pneu-WearLoctite® Silver Grade Anti-Seize
Canadian Food Inspection Agency (CFIA)Loctite® E-00CL™ Hysol® Epoxy Adhesive, Fast SettingLoctite® E-00NS™ Hysol® Epoxy Adhesive, Non-SagLoctite® E-05CL™ Hysol® Epoxy Adhesive, ToughenedLoctite® E-20HP™ Hysol® Epoxy Adhesive, Fast SettingLoctite® E-20NS™ Hysol® Epoxy Adhesive, Metal BonderLoctite® E-30CL™ Hysol® Epoxy Adhesive, Glass BonderLoctite® E-40FL™ Hysol® Epoxy Adhesive, FlexibleLoctite® E-60HP™ Hysol® Epoxy Adhesive, ToughenedLoctite® E-60NC™ Hysol® Epoxy Adhesive, Electrically Non-CorrosiveLoctite® E-90FL™ Hysol® Epoxy Adhesive, FlexibleLoctite® E-120HP™ Hysol® Epoxy Adhesive, Ultra StrengthLoctite® U-05FL™ Hysol® Urethane Adhesive, High StrengthLoctite® 220™ Threadlocker, Wicking Grade/Low StrengthLoctite® 222MS™ Threadlocker, Low Strength/Small ScrewLoctite® 242® Threadlocker, Medium StrengthLoctite® 243™ Threadlocker, Medium Strength/Oil ResistantLoctite® QuickStix™ 248™ Threadlocker, Medium Strength/Removable Loctite® 262™ Threadlocker, Medium to High StrengthLoctite® 266™ Threadlocker, High Strength/High Temperature
AG
EN
CY
AP
PR
OVA
LS
2
Loctite® QuickStix™ 268™ Threadlocker, High Strength Loctite® 271™ Threadlocker, High StrengthLoctite® 272™ Threadlocker, High Strength/High TemperatureLoctite® 290™ Threadlocker, Wicking GradeLoctite® 330™ Depend® Adhesive, No MixLoctite® 380™ Black Max® Instant Adhesive, ToughenedLoctite® 401™ Prism® Instant Adhesive, Surface InsensitiveLoctite® 404™ Quick Set™ Instant Adhesive, General PurposeLoctite® 410™ Prism® Instant Adhesive, Black/Toughened Loctite® 414™ Super Bonder® Instant Adhesive Loctite® 416™ Super Bonder® Instant Adhesive Loctite® 422™ Super Bonder® Instant Adhesive Loctite® 454™ Prism® Instant Adhesive, Surface Insensitive GelLoctite® 518™ Gasket Eliminator® Flange Sealant Loctite® 545™ Thread Sealant, Hydraulic/Pneumatic FittingsLoctite® 554™ Thread Sealant, Refrigerant SealantLoctite® QuickStix™ 561™ PST® Pipe SealantLoctite® 564™ Thread Sealant, General PurposeLoctite® 565™ PST® Thread Sealant, Controlled StrengthLoctite® 567™ PST® Thread Sealant, High TemperatureLoctite® 569™ Thread Sealant, Hydraulic SealantLoctite® 587™ Blue, High Performance RTV Silicone Gasket MakerLoctite® 592™ PST® Thread Sealant, Slow CureLoctite® 598™ Black, High Performance RTV Silicone Gasket MakerLoctite® 609™ Retaining Compound, Press Fit/General PurposeLoctite® 620™ Retaining Compound, Slip Fit/High TemperatureLoctite® 638™ Retaining Compound, Slip Fit/Maximum StrengthLoctite® 641™ Retaining Compound, Controlled StrengthLoctite® 660™ Quick Metal® Retaining Compound, Press Fit RepairLoctite® 712™ Tak Pak® AcceleratorLoctite® 770™ Prism® PrimerLoctite® 2760™ Threadlocker, Primerless/High StrengthLoctite® 4210™ Prism® Instant Adhesive, Thermal ResistantLoctite® 4212™ Prism® Instant Adhesive, Thermal Resistant GelLoctite® 5900® Flange Sealant, Heavy Body RTV SiliconeLoctite® 7649™ Primer N™Loctite® Aviation Gasket SealantLoctite® Belt Dressing & ConditionerLoctite® Big Foot™ Acrylic Pedestrian GradeLoctite® Big Foot™ Heavy Duty Pedestrian GradeLoctite® Big Foot™ Low Profile Pedestrian GradeLoctite® Big Foot™ Vehicular GradeLoctite® Big Foot™ Zero V.O.C.Loctite® Black Contact AdhesiveLoctite® QuickStix™ C5-A® Copper Based Anti-SeizeLoctite® Cold Galvanizing CompoundLoctite® Color Guard®, Tough Rubber CoatingLoctite® Contact AdhesiveLoctite® Extend® Rust TreatmentLoctite® Fixmaster® Aluminum LiquidLoctite® Fixmaster® Aluminum PuttyLoctite® Fixmaster® Deep Pour GroutLoctite® Fixmaster® Fast Cure Epoxy, Mixer CupsLoctite® Fixmaster® Fast Set GroutLoctite® Fixmaster® Fast Set Steel EpoxyLoctite® Fixmaster® Fast Set Steel PuttyLoctite® Fixmaster® Floor FillLoctite® Fixmaster® General Purpose Epoxy, Mixer CupsLoctite® Fixmaster® High Performance EpoxyLoctite® Fixmaster® High Performance QuartzLoctite® Fixmaster® Magna-CreteLoctite® Fixmaster® Marine ChockingLoctite® Fixmaster® Poxy Pak™, Fast Cure EpoxyLoctite® Fixmaster® Stainless Steel PuttyLoctite® Fixmaster® Steel LiquidLoctite® Fixmaster® Steel PuttyLoctite® Fixmaster® Superior MetalLoctite® Fixmaster® Underwater Repair EpoxyLoctite® Fixmaster® Wear Resistant PuttyLoctite® Form-A-Thread® Stripped Thread Repair KitLoctite® Gasket Sealant 1Loctite® H.V.A.C. Blue Pipe Joint CompoundLoctite® High Temperature Gasket MakerLoctite® Instant GasketLoctite® No More Leaks™, Plastic Pipe SealantLoctite® O-Ring Making KitLoctite® Pipe Repair KitLoctite® Silver Grade Anti-SeizeLoctite® QuickStix™ Silver Grade Anti-Seize
Agency Approvals
AG
EN
CY
AP
PR
OVA
LS
3
Loctite® Solvo-Rust® Super Penetrating OilLoctite® Superflex® RTV, Silicone Adhesive Sealants (Black, Clear, White)Loctite® Superflex® Red High Temp RTV, Silicone Adhesive SealantLoctite® Thread Sealant with PTFELoctite® Urethane SealantLoctite® ViperLube® High Performance Synthetic GreaseLoctite® ViperLube® High Performance Synthetic Grease-AerosolLoctite® ViperLube® High Performance Synthetic Lubricant, Gear OilsLoctite® ViperLube® High Perf. Synthetic Lubricant, Lightweight Oils
Military Specifications (Mil Spec)Loctite® 220™ Threadlocker, Wicking Grade/Low StrengthLoctite® 222MS™ Threadlocker, Low Strength/Small ScrewLoctite® 242® Threadlocker, Medium StrengthLoctite® 262™ Threadlocker, Medium to High StrengthLoctite® 271™ Threadlocker, High StrengthLoctite® 277™ Threadlocker, High Strength/Large ThreadsLoctite® 290™ Threadlocker, Wicking GradeLoctite® 571™ Thread Sealant, Pipe Sealant HVVLoctite® 609™ Retaining Compound, Press Fit/General PurposeLoctite® 635™ Retaining Compound, Slip Fit/High Strength/Slow CureLoctite® 640™ Retaining Compound, Press Fit/Medium Strength/High Temp.Loctite® 675™ Retaining Compound, Press Fit/Medium StrengthLoctite® 712™ Tak Pak® AcceleratorLoctite® 7452™ Tak Pak® AcceleratorLoctite® 7471™ Primer T™Loctite® 7649™ Primer N™Loctite® C5-A® Copper Based Anti-Seize LubricantLoctite® QuickStix™ C5-A® Copper Based Anti-SeizeLoctite® Moly-50™ Anti-SeizeLoctite® Silver Grade Anti-SeizeLoctite® QuickStix™ Silver Grade Anti-SeizeLoctite® Thread Sealing Tape with PTFE
Military Specifications (Commercial Item Standard)Loctite® 404™ Quick Set™ Instant Adhesive, General PurposeLoctite® 406™ Prism® Instant Adhesive, Surface InsensitiveLoctite® 414™ Super Bonder® Instant Adhesive Loctite® 415™ Super Bonder® Instant Adhesive Loctite® 416™ Super Bonder® Instant Adhesive Loctite® 420™ Super Bonder® Instant Adhesive Loctite® 422™ Super Bonder® Instant Adhesive Loctite® 430™ Super Bonder® Instant AdhesiveLoctite® 444™ Tak Pak® Instant AdhesiveLoctite® 493™ Super Bonder® Instant AdhesiveLoctite® 495™ Super Bonder® Instant AdhesiveLoctite® 496™ Super Bonder® Instant Adhesive
FDA CFR175.105Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA BasedLoctite® 3X™ Hysol® Polyshot™ Hot Melt Adhesive, EVA BasedLoctite® 232™ Hysol® Hot Melt Adhesive, EVA BasedLoctite® 236™ Hysol® Hot Melt Adhesive, EVA BasedLoctite® 342™ Hysol® Hot Melt Adhesive, EVA BasedLoctite® 740™ Hysol® Hot Melt Adhesive, EVA BasedLoctite® 0740LV™ Hysol® Hot Melt Adhesive, EVA BasedLoctite® 1942™ Hysol® Hot Melt Adhesive, EVA BasedLoctite® 6002™ Hysol® Hot Melt Adhesive Loctite® CoolMelt™ Hysol® Hot Melt Adhesive, EVA BasedLoctite® QuikPac™ Hysol® Hot Melt Adhesive, EVA BasedLoctite® SuperPac™ Hysol® Hot Melt Adhesive, EVA BasedLoctite® WaxPac™ Hysol® Hot Melt Adhesive, EVA Based
UL Classified/Listed for U.S.Loctite® 55™ Pipe Sealing CordLoctite® 271™ Threadlocker, High StrengthLoctite® 510™ Gasket Eliminator® Flange SealantLoctite® 515™ Gasket Eliminator® Flange SealantLoctite® QuickStix™ 561™ PST® Pipe Sealant Loctite® 565™ PST® Thread Sealant, Controlled StrengthLoctite® 567™ PST® Thread Sealant, High TemperatureLoctite® 587™ Blue, High Performance RTV Silicone Gasket MakerLoctite® 592™ PST® Thread Sealant, Slow CureLoctite® 5083™ Nuva-Sil® Silicone Potting Compound
Loctite® 5091™ Nuva-Sil® Silicone Potting Compound, High AdhesionLoctite® 5950™ Fastgasket® Flange Sealant, Cure-in-PlaceLoctite® 7804FRM-HV™ Hysol® Hot Melt AdhesiveLoctite® 7809FR™ Hysol® Hot Melt Adhesive, PolyamideLoctite® Superflex® Non-Corrosive RTV, Clear Silicone Adhesive SealantLoctite® Superflex® RTV, Silicone Adhesive Sealants (Black, Clear, White)
ULC Classified for CanadaLoctite® QuickStix™ 561™ PST® Pipe SealantLoctite® 564™ Thread Sealant, General PurposeLoctite® 565™ PST® Thread Sealant, Controlled StrengthLoctite® 567™ PST® Thread Sealant, High TemperatureLoctite® 592™ PST® Thread Sealant, Slow CureLoctite® Superflex® RTV, Silicone Adhesive Sealants (Black, Clear, White)
CSA InternationalLoctite® 55™ Pipe Sealing CordLoctite® QuickStix™ 561™ PST® Pipe SealantLoctite® 564™ Thread Sealant, General PurposeLoctite® 565™ PST® Thread Sealant, Controlled StrengthLoctite® 567™ PST® Thread Sealant, High Temperature
ISO-10993 ComplianceLoctite® M-11FL™ Hysol® Medical Device Urethane AdhesiveLoctite® M-21HP™ Hysol® Medical Device Epoxy AdhesiveLoctite® M-31CL™ Hysol® Medical Device Epoxy AdhesiveLoctite® M-121HP™ Hysol® Medical Device Epoxy AdhesiveLoctite® 713™ Prism® Medical Device AcceleratorLoctite® 3201™ Light Cure Adhesive, Polycarbonate/ThermoplasticsLoctite® 3211™ Light Cure Adhesive, Polycarbonate/ThermoplasticsLoctite® 3301™ Light Cure Adhesive, Plastic/MetalLoctite® 3311™ Light Cure Adhesive, Plastic/MetalLoctite® 3321™ Light Cure Adhesive, Plastic/MetalLoctite® 3341™ Light Cure Adhesive, Plasticized SubstratesLoctite® 3345™ Light Cure Adhesive, Glass/Metal Loctite® 3381™ Light Cure Adhesive, Flexible/PlasticsLoctite® 3911™ Light Cure AdhesiveLoctite® 3912™ Light Cure AdhesiveLoctite® 3913™ Light Cure AdhesiveLoctite® 3921™ Light Cure Adhesive, Plastic/MetalLoctite® 3922™ Light Cure Adhesive, Plastic/MetalLoctite® 3924™ Light Cure Adhesive, Plastic/MetalLoctite® 3926™ Light Cure Adhesive, Plastic/MetalLoctite® 3933™ Light Cure AdhesiveLoctite® 3936™ Light Cure AdhesiveLoctite® 3941™ Light Cure Adhesive, High Performance/Various SubstratesLoctite® 3942™ Light Cure Adhesive, High Performance/Various SubstratesLoctite® 3943™ Light Cure Adhesive, High Performance/Various SubstratesLoctite® 3944™ Light Cure AdhesiveLoctite® 3971™ Light Cure Adhesive, Plasticized SubstratesLoctite® 3972™ Light Cure Adhesive, Plasticized SubstratesLoctite® 3981™ Hysol® Epoxy Adhesive, High Performance/Various SubstratesLoctite® 3982™ Hysol® Epoxy Adhesive, High Performance/Various SubstratesLoctite® 3984™ Hysol® Epoxy Adhesive, High Performance/Various SubstratesLoctite® 4011™ Prism® Medical Device AdhesiveLoctite® 4013™ Prism® Medical Device AdhesiveLoctite® 4014™ Prism® Medical Device AdhesiveLoctite® 4031™ Prism® Medical Device AdhesiveLoctite® 4061™ Prism® Medical Device AdhesiveLoctite® 4081™ Prism® Medical Device AdhesiveLoctite® 4161™ Super Bonder® Medical Device Instant AdhesiveLoctite® 4206™ Prism® Medical Device AdhesiveLoctite® 4304™ Flashcure® Light Cure AdhesiveLoctite® 4305™ Flashcure® Light Cure AdhesiveLoctite® 4306™ Flashcure® Light Cure Adhesive, InstantLoctite® 4307™ Flashcure® Light Cure Adhesive, InstantLoctite® 4541™ Prism® Medical Device AdhesiveLoctite® 4601™ Prism® Medical Device AdhesiveLoctite® 4851™ Prism® Instant Adhesive, FlexibleLoctite® 4861™ Prism® Instant Adhesive, FlexibleLoctite® 4981™ Super Bonder® Medical Device AdhesiveLoctite® 5248™ Nuva-Sil® Medical Device SealantLoctite® 7701™ Prism® Medical Device Adhesive Primer
The information above is an abbreviated list of Loctite® brand products that hold industry approvals. It is designed toserve as a quick reference tool only and is subject to change. There are other Loctite® brand products that qualify foradditional industry approvals that are not promoted in this catalog. Please call Henkel Technical Support at1.800.LOCTITE (562.8483) with any inquiries.
Henkel Corporation offers complete engineeringservices for projects demanding expertise andsupport beyond the limits of our standard technical services. As a result, our engineers and scientists can quote the following value-added services.
• On-site engineering assistance and consultation
• Joint product development programs• Contract lab services and testing• Prototype testing and fixture preparation• Custom formulations
To access these and other Henkel EngineeringServices, contact our Adhesives and SealantsSpecialists at 1-800-LOCTITE (562-8483).Immediate technical assistance is availablebetween 8 am – 5 pm EST.
In today’s volatile and fluid market landscape, a
manufacturer’s survival and success are directly
related to its technical capability. Rapidly
emerging, innovative processes and materials
mandate an unprecedented breadth and depth of
engineering savvy. Not every company can
house the equipment and engineering staff
necessary to compete in today’s marketplace.
Henkel Engineering Services understands the
necessity of partnering with manufacturers and
sharing this expertise with the industry through
cost-effective, custom-tailored programs.
ENGINEERINGSERVICES
These programs range from specialized field
teams that evaluate specifications and in-line
process requirements, to the development of
adhesives, and the design, construction and
implementation of dispensing and curing
systems. Whether you need competent
recommendations on chemical properties, or a
full-blown, turnkey process line, Henkel
Engineering Services can provide solutions,
through the seamless integration of mechanical,
electrical, industrial manufacturing, and chemical
engineering teams.
EN
GIN
EE
RIN
G S
ER
VIC
ES
4
The Application Engineering Lab
plays host to a battery of testing
equipment. Here, experienced
technicians conduct a multitude of
tests, such as detack, surface
contamination, deforming, fixture,
tensile, and peel strengths.
Crucial in the engineering process is
determining whether the customer’s
application and the adhesive criteria can
withstand the gauntlet of rigorous
strength tests performed by Henkel.
Custom test fixtures and protocols can be
developed to meet specific end-use
requirements.
Our engineers can also create environmental
conditions that simulate, and even exceed,
the most severe conditions. With heat
aging, salt fog chambers, humidity
chambers, and thermal cycling chambers,
manufacturers can be provided with
confidence in the durability and longevity
of an assembly in the field.
Engineers specializing in Loctite®
brand products are frequently
called upon to provide process
simulations of customer parts on
short production runs, such as
gasketing. Our prototyping
capability provides valuable data
regarding the feasibility of full-
scale manufacture.
EN
GIN
EE
RIN
G S
ER
VIC
ES
5
SENSOR BRACKET
DO NOT ASSEMBLE
SENSOR REF. ONLY
SHOWN IN THIS VIEW FOR CLARITY
BONDING For successful bonding, knowledge of adhesivemethodology is essential. The most frequent causesfor adhesive failure do not involve adhesive strength.Rather, they are attributed to inadequatepreparation of the substrates and improperadhesive selection.
The most important factor in proper adhesiveselection is assessing the environment the adhesivemust withstand. Once the environmental factorshave been recognized, adhesive selection becomesmore easily defined, as other factors, such as joint design, substrates, load, stress cycles, etc., can often be varied or altered with minor design changes.
What is the Best Adhesive for My Application?
The following chart has been designed to help youselect a bonding adhesive. This chart is intended toserve as a general guideline to help you determinewhich adhesive categories are best suited for yourapplication. The data presented represents typicalproperties for each adhesive category; however,individual product properties may differ. It issuggested that, based on the information provided,you consider at least the two best adhesivecategories that meet your application criteria.Individual product information can then be found onthe pages that follow to help narrow your search.
This chart should not be used to specify adhesives without specifictesting. It is recommended that you conduct on-part testing to ensureadhesive performance before specifying any adhesive.
Henkel Adhesives and Sealants Specialists are available to assist you withnew product designs, or to help you re-engineer an existing applicationusing Loctite® brand products for improved performance and costsavings. They can also set up testing of your parts at the HenkelCustomer Engineering Center. For application assistance, call 1-800-LOCTITE (562-8483) or visit www.loctite.com and select “Contact Loctite.”
6
BO
ND
ING
AS
SE
MB
LY P
RO
DU
CT
S
AS
SE
MB
LY P
RO
DU
CT
S
7
BO
ND
ING
Benefits
Limitations
Temperature Resistance Typical for the category (°F) Highest Rated Product (°F)
Environmental Resistance Polar Solvents (ex. H2O, Ethylene Glycol, IPA, Acetone) Non-Polar Solvents (ex. Motor Oil, Toluene, Gasoline, ATF)
Adhesion to Substrates Metals Plastics2
Glass Rubber Wood
Overlapping Shear Strength
Peel Strength
Tensile Strength
Elongation/Flexibility
Hardness
Excellentadhesion to mostrubber or plastics
Low solventresistance
-65 to +180+250
Poor1
Good
Very goodExcellent
PoorVery good
Good
High
Low
High
Low
Rigid
Rapidcure/adhesion
to plastics
Light CureSystem required
-65 to +300+350
Good
Very good
GoodExcellentExcellent
FairPoor
High
Medium
High
Medium
Semi-rigid
Light CureCyanoacrylates
Wide range of formulations
Mixingrequired
-65 to +180+400
Very good
Excellent
ExcellentFair
ExcellentFair
Very Good
High
Medium
High
Low
Rigid
Epoxies
Fast, largegap filling
Low heatresistance
-65 to +250+330
Good
Good
GoodVery good
GoodFair
Excellent
Low
Medium
Low
High
Semi-soft
Hot Melts Silicones UrethanesPERFORMANCE CONSIDERATIONS
A D H E S I V E C AT E G O RY
1 Cyanoacrylates have very good moisture resistance on plastics.2 Uncured liquid adhesives may cause stress cracking of certain thermoplastics, e.g. polycarbonate, acrylic, and polysulfone. Special products and process techniques are available. Consult the Loctite® Design Guide to Bonding Plastics (LT2197) or contact 1-800-LOCTITE for more information.3 Elevated temperatures are required to dispense liquid Hot Melt Adhesives.4 Urethane Hot Melts require 24 hours for full cure.
Excellenttemperatureresistance
Low strength
-65 to +400+600
Good
Poor-fair
GoodFair
Very goodGoodFair
Low
Medium
Low
Very High
Soft
Excellenttoughness/
flexibility
Sensitive tomoisture
-65 to +250+300
Good
Good
GoodVery good
GoodGoodFair
Medium
Medium
Medium
High
Soft
Number of Components
Cure Temperature
Fixture Time Average Fastest
Full Cure Time
Gap Fill Ideal (in inches) Maximum (in inches)
Dispensing/Mixing Equipment Required?
Light Cure Versions Available?
For more information on each adhesive category, refer to pages...
1
Room Temp.
60 seconds10 seconds
24 hours
0.001 - 0.0030.010
No
Yes
12-15, 29,31, 59, 60
1
UV/Visible
30 seconds5 seconds
30 - 60seconds
.002 to .0100.25
No
Yes
28-31, 58-60
2
Room Temp.
35 minutes3-5 minutes
12 - 24 hours
0.004 - 0.0060.125
Yes
Yes
16-19,21, 59, 61
1
Room Temp.3
70 seconds20 seconds
1 hour (orwhen cooled)4
0.002 - 0.0050.240
Yes
No
24-27
PROCESS CONSIDERATIONS
1
Room Temp.
25 minutes10 minutes
24 hours
0.004 - 0.0060.250
No
Yes
29, 31,59, 61
2
Room Temp.
25 minutes5 minutes
24 hours
0.004 - 0.0060.125
Yes
No
17, 20, 21,59, 61
2-Part Acrylics 2-Step Acrylics
Good impactresistance/
flexibility
Mixing required
-65 to +250+250
Good
Very good
ExcellentExcellent
GoodPoorGood
High
High
High
High
Semi-rigid
2
Room Temp.
20 minutes3-5 minutes
24 hours
0.010 - 0.0400.5
Yes
No
9, 11
Good impactresistance,
no-mix
Primer required
-65 to +300+400
Good
Very good
ExcellentFair
ExcellentPoorGood
High
Medium
High
Medium
Semi-rigid
2
Room Temp.
5 minutes30 seconds
24 hours
0.002 - 0.0040.040
No
Yes
8, 10
8
Loctite® brand structural acrylic adhesiveswere developed for structural bondingapplications that require tensile, shear and peelstrength combined with maximum impact,stress and shock resistance. Available in twomajor categories:
• Two-Step No-Mix Structural Acrylics• Two-Part Structural Acrylics
Loctite® 324™ Speedbonder™
Structural Adhesive
High ImpactIdeal for large gap applications.Offers the strength of an epoxy andthe speed of an instant adhesive.Solvent resistant. Cures in minutes.Specially formulated for toughnessand impact strength.
Loctite® 325™ Speedbonder™
Structural Adhesive
High TemperatureSolvent resistant, activator-cured inminutes. Forms flexible bonds ongaps up to 0.40". Designed forsevere environments andtemperatures to 350°F.
BONDINGACRYLIC ADHESIVES
Loctite® 326™ Speedbonder™
Structural Adhesive
Fast FixtureAn all-purpose bonder. Offers thestrength of an epoxy and the speedof an instant adhesive. Solventresistant. Cures in minutes. Idealfor applications requiring fastfixturing.
Loctite® 330™ Depend®
Adhesive
No-MixA no-mix high viscosity adhesivefor a wide range of materials,including metal, wood, ferrite,ceramic, and plastic.
Loctite® 332™
Structural Adhesive
Severe EnvironmentAn activator-cured, no mix adhesivethat provides high temperaturecapability with thermal durability upto 400°F.
Loctite® 392™
Structural Adhesive
Fast Fixture/Magnet BonderSingle component dual-cure acrylic.Provides fast fixture speed andtough reliable bonds.
TWO-STEP NO MIX STRUCTURAL ACRYLIC ADHESIVES – when in contact with a liquid activator,these no mix materials cure rapidly at room temperature to a weather-resistant bond. Ideal forclose fitting parts and where extended open time is required.
BO
ND
ING
•
AC
RY
LIC
AD
HE
SIV
ES
AS
SE
MB
LY P
RO
DU
CT
S
BO
ND
ING
• AC
RY
LIC A
DH
ES
IVE
SA
SS
EM
BLY
PR
OD
UC
TS
Loctite® H3000™
Speedbonder™
Structural Adhesive
General PurposeA low viscosity adhesive ideal forbonding plastics and composites.
Loctite® H3300™
Speedbonder™
Structural Adhesive
General Purpose/Fast FixturingA non-sag, fast fixturing structuraladhesive for bonding plastics andcomposites.
Loctite® H3151™
Speedbonder™
Structural Adhesive
Metal BonderExtended open time allows foradjustment of parts. Excellent bondstrength on aluminum and steel.Impact and peel resistant.
Loctite® H4000™
Speedbonder™
Structural Adhesive
Non-SagA two component and roomtemperature cure methacrylateadhesive that fixtures rapidly.Bonds various plastic substrates,stainless steel, epoxy coated metal, and many fiber reinforcedplastics, such as glass fiber reinforced polyester.
Loctite® H4100™
Speedbonder™
Structural Adhesive
Ultra FastFast fixturing structural adhesive.Forms strong bonds to plastics andcomposites.
Loctite® H4200™
Speedbonder™
Structural Adhesive
ToughenedA general purpose plastic andcomposite bonder with high peeland impact resistance. Fixtures in15 minutes.
Loctite® H4500™
Speedbonder™
Structural Adhesive
Metal BonderHigh strength structural adhesivefor metals. Fixtures in 10 minutes.
Loctite® H4800™
Speedbonder™
Structural Adhesive
ToughenedProvides extended open time,making it ideal for the assembly andadjustment of large parts. Excellentpeel and impact resistance.Provides high bond strengths oncomposites.
Loctite® H8000™
Speedbonder™
Structural Adhesive
Fast FixtureFeatures fast fixture time andexcellent bond strength on multiplesubstrates, including metals andcomposites.
Loctite® 3030™ Adhesive
Polyolefin BonderA fast curing thixotropic acrylicadhesive. Designed to bond lowenergy plastic substrates.
TWO-PART STRUCTURAL ACRYLIC ADHESIVES – when statically mixed, these adhesives develop a tough, durable bond to a wide variety of substrates, including metals, plastics, and composites.Loctite® brand two-part structural acrylics are available in mixer-friendly packaging to minimizewaste and process time. Refer to the Dispensing section for available dual cartridge dispensersand mix nozzles.
Equipment is sold separately.Please refer to the Dispensingsection on pages 106 & 107for a complete line of dualcartridge dispensers and mix nozzles.
9
REQUIRED EQUIPMENT
NEW
AS
SE
MB
LY P
RO
DU
CT
S
312™Speedbonder™
324™Speedbonder™
325™Speedbonder™
326™Speedbonder™
330™Depend®
332™
334™
392™
03333001443123131243
3243032490
3253032586
3262932685
202532025120252330583306433081
332013327533290
3340333470
392503927539280
10 ml kit1
50 ml kit2
50 ml bottle1 liter bottle
50 ml bottle1 liter bottle
50 ml bottle1 liter bottle
50 ml bottle1 liter bottle
3 ml kit3
25 ml kit4
250 ml kit5
250 ml tube300 ml cartdg.1 liter bottle
25 ml syringe300 ml cartdg.1 liter bottle
25 ml syringe300 ml cartdg.
50 ml tube300 ml cartdg.1 liter bottle
Fast cure on close fitting parts
High impactapplications
Hightemperatureapplications
Fastfixturingapplications
Rough orporoussurfaces
Hightemperatureapplications
Toughmagnetbonder
Fast fixturingmagnet bonder
.003"
.040"
.040"
.020"
.030"
.020"
.020"
.025"
Amber
Amber
Amber
Amber
Amber
Paleyellow
Paleyellow
Amber
3,000
2,175
2,200
2,700
3,300
3,500
2,800
2,800
736™
7075™
7075™
7649™
7387™/7380™
7387™/7380™
7387™/7380™
7387™/7380™
LOCTITE® BRAND STRUCTURALADHESIVES PROPERTIES CHART
Typi
cal U
se
Col
or
Gap
Fill
1,000
17,000
20,000
18,000
67,500
200,000
80,000/140,000
Thixotropic
60,000
Visc
osity
, cP
at 2
0 RP
M
Shea
r St
reng
th
psi*
-65°Fto
225°F
-65°Fto
275°F
-65°Fto
350°F
-65°Fto
225°F
-65°Fto
250°F
-65°Fto
400°F
-65°Fto
300°F
-65°Fto
300°F
Tem
pera
ture
Ra
nge
Reco
mm
ende
d Pr
imer
1.08
1.11
1.11
1.10
1.05
0.97
1.05
1.16
Spec
ific
Gra
vity
ItemNumber ContainerP R O D U C T
–
–
–
–
CFIA
–
–
–
Agen
cyAp
prov
als
Fixture - 30 sec.*Full - 24 hrs.
Fixture - 5 min.Full - 24 hrs.
Fixture - 5 min.Full - 24 hrs.
Fixture - 1 min.Full - 24 hrs.
Fixture - 5 min.*Full - 24 hrs.
Fixture - 3 min.Full - 24 hrs.
Fixture - 90 sec.Full - 24 hrs.
Fixture - 60 sec.Full - 24 hrs.
Cur
e Sp
eed
* Varies with substrates.
Indicates worldwide availability.
1 Contains 10 ml bottle of Loctite® 312™ Speedbonder™ and 40 gm aerosol can of Loctite® 736™ Primer NF™.2 Contains 50 ml bottle of Loctite® 312™ Speedbonder™ and 6 oz. aerosol can of Loctite® 736™ Primer NF™.3 Contains 0.2 fl. oz. tube of Loctite® 330™ Depend® Adhesive and 0.7 fl. oz. ampule of Loctite® 7387™ Depend® Activator.4 Contains 25 ml syringe of Loctite® 330™ Depend® Adhesive and 25 gm aerosol can of Loctite® 7387™ Depend® Activator.5 Contains 250 ml tube of Loctite® 330™ Depend® Adhesive and 4.5 fl. oz. aerosol can of Loctite® 7387™ Depend® Activator.
BO
ND
ING
•
AC
RY
LIC
AD
HE
SIV
ES
10
BO
ND
ING
• AC
RY
LIC A
DH
ES
IVE
SA
SS
EM
BLY
PR
OD
UC
TS
H3000™Speedbonder™
H3101™Speedbonder™
H3300™Speedbonder™
3030™Speedbonder™
H4000™Speedbonder™
H4100™Speedbonder™
H4200™Speedbonder™
H4800™Speedbonder™
H8000™Speedbonder™
8300183000
8300783006
830208301983024* 83022*
37220
8302583031*83028*
83032
83038
8304583047*83046*
3616035939*35940*
50 ml dual cartridge 400 ml dual cartridge
50 ml dual cartridge 400 ml dual cartridge
50 ml dual cartridge400 ml dual cartridge40 lb. pail, adhesive40 lb. pail, activator
35 ml dual cartridge
490 ml dual cartridge40 lb. pail, adhesive 40 lb. pail, activator
490 ml dual cartridge
490 ml dual cartridge
490 ml dual cartridge40 lb. pail, adhesive36 lb. pail, activator
490 ml dual cartridge35 lb. pail, adhesive45 lb. pail, activator
Cream
Cream
Yellow
Offwhite
Paleyellow
Paleyellow
Paleyellow
Lightyellow
Green
65,000/24,000
95,000/65,000
150,000/85,000
30,000/5,000
100,000/70,000
95,000/145,000
95,000/45,000
50,000/55,000
160,000/40,000
12-15
25
6
10
14
3-5
15
35
15-20
1,495
1,565
1,425
N/A
1,500
1,405
1,520
1,590
1,500
LOCTITE® BRAND SPEEDBONDER™ PLASTIC AND COMPOSITE BONDERS PROPERTIES CHART
Col
or (m
ixed
)
Ope
n Ti
me
in M
inut
es
5
15-20
5
2-3
8
2
5
20-25
10-15
Visc
osity
cP
(p
art A
/ p
art B
)
Fixt
ure
Tim
ein
Min
utes
-45
35
35-40
2-4
45
13
55
50
50-60
Peel
Str
engt
h,pl
i
Gel
coat
She
arSt
reng
th, p
si
3,830
2,510
3,350
1,450
3,500
3,140
4,020
3,930
3,500
Stee
l She
arSt
reng
th, p
si
2,360
1,610
1,700
975
2,580
710
2,870
1,810
3,000
Alum
inum
She
arSt
reng
th, p
si
1,740
1,810
1,650
N/A
1,645
1,725
1,640
1,725
1,600
1,550
1,420
1,880
1,330
790
2,270
740
530
460
Fibe
rgla
ss S
hear
Stre
ngth
, psi
ABS
Shea
rSt
reng
th, p
si
2,510
2,080
990
2,000
1,980
2,850
2,440
2,090
1,740
–
–
–
–
NSF/ANSI 61
–
–
–
–
PVC
She
arSt
reng
th, p
si
Agen
cy
Appr
oval
s
ItemNumber ContainerPRODUCT
25
20-25
20
6
20-25
8
>42
>42
>42Im
pact
Str
engt
h,kJ
/m2
Peel Strength measured on steel.Impact Strength measured on as-received aluminum.* Made-to-order item.
1:1 Products
10:1 Products
H3151™Speedbonder™
H4500™Speedbonder™
8301583014
83041
50 ml dual cartridge400 ml dual cartridge
490 ml dual cartridge
Paleyellow
Paleyellow
70,000/70,000
54,000/54,000
60
10
1,440
1,455
LOCTITE® BRAND SPEEDBONDER™ METAL BONDERS PROPERTIES CHART
Col
or (m
ixed
)
Ope
n Ti
me
in M
inut
es
35-40
8-10
Visc
osity
cP
(p
art A
/ p
art B
)
Fixt
ure
Tim
ein
Min
utes
40
40
Peel
Str
engt
h,pl
i
Gel
coat
She
arSt
reng
th, p
si
3,770
4,130
Stee
l She
arSt
reng
th, p
si
3,600
4,020
Alum
inum
She
arSt
reng
th, p
si
1,835
1,760
1,570
1,560
Fibe
rgla
ss S
hear
Stre
ngth
, psi
ABS
Shea
rSt
reng
th, p
si1,590
2,200
PVC
She
arSt
reng
th, p
si
ItemNumber ContainerPRODUCT
>42
40
Impa
ct S
tren
gth,
kJ/m
2
1:1 Products
10:1 Products
Peel Strength measured on steel.Impact Strength measured on as-received aluminum.Fixture time measured on steel.
11
NEW
Technology from Henkel Corporation has madethe productivity promises of cyanoacrylateadhesives (instant adhesives) a reality with theindustry’s widest selection of high-performance,application-specific, instant adhesives. Loctite®
brand instant adhesives are available in a varietyof viscosities, cure speeds, gap-filling capabilities,and substrate compatibilities. The ultra high-performance Loctite® brand Prism® family offersadditional products that surpass the moststringent demands, including toughenedformulations, low odor and low bloomingproducts, surface insensitive and thermallyresistant formulations.
Loctite® 380™ Black Max®
Instant Adhesive
ToughenedThe original elastomer-modifiedinstant adhesive. Bonds metal,rubber, and plastic. Excellent peel,impact, and shear strength.
Loctite® 403™ Prism®
Instant Adhesive
Low Odor/Low BloomAn adhesive for less precisely fittedparts. Eliminates the need for sophisticated ventilation.
BONDINGCYANOACRYLATE ADHESIVES
Loctite® 404™ Quick Set™
Instant Adhesive
General PurposeFor general maintenance andrepair. Excellent for rubber bonding.
Loctite® 411™ Prism®
Instant Adhesive
Clear ToughenedAn adhesive formulated forexcellent impact and peel strengthin gap filling applications.
Loctite® 430™ Super Bonder®
Instant Adhesive
A general industrial-grade instantadhesive. Excellent choice forbonding close fitting metal parts.
Loctite® 444™ Tak Pak®
Instant Adhesive
An adhesive designed for printedcircuit board assembly and repair.Cures instantly with Loctite® 712™
or 7452™ Tak Pak® Accelerator.
Loctite® 495™ Super Bonder®
Instant Adhesive
General PurposeDesigned to bond rubber, metal,and plastic parts with gaps to .004".
BO
ND
ING
•
CYA
NO
AC
RY
LAT
E A
DH
ES
IVE
SA
SS
EM
BLY
PR
OD
UC
TS
12
AS
SE
MB
LY P
RO
DU
CT
S
Loctite® 498™ Super Bonder®
Instant Adhesive
Thermal Cycling ResistantA medium viscosity, hightemperature product for all metals, and most plastics andrubbers. Resists temperatures to 223°F continuous or up to 250°F intermittent.
Loctite® 4204™ Prism®
Instant Adhesive
Thermal ResistantPart of the family of clear,toughened, thermally resistantinstant adhesives. Excellent hotstrength and heat aging propertiesup to 250°F.
Loctite® 4210™ Prism®
Instant Adhesive
Thermal ResistantPart of the family of blacktoughened thermally resistantinstant adhesives. Low viscosityand thermally resistant up to 250°F.
Loctite® 4212™ Prism®
Instant Adhesive
Thermal Resistant GelA high viscosity, black, toughened,instant adhesive. Thermallyresistant up to 250°F.
Loctite® 4500™ Prism®
Instant Adhesive
Fast Curing/Surface Insensitive GelSpecifically formulated for fastercure speeds on dry or acidicsurfaces and substrates. The gelconsistency prevents adhesive floweven on vertical surfaces.
Loctite® 4501™ Prism®
Instant Adhesive
Wicking ViscosityA single component, fast-curinginstant adhesive. Formulated tomaintain cure speed throughout itsshelf life.
Loctite® 4502™ Prism®
Instant Adhesive
Fast Curing/Surface InsensitiveA medium viscosity, singlecomponent instant adhesivespecifically formulated for fastercure speeds on dry or acidicsurfaces and substrates.
Loctite® 4503™ Prism®
Instant Adhesive
Fast Curing/Surface InsensitiveA high viscosity, single componentinstant adhesive specificallyformulated for faster cure speedson dry or acidic surfaces andsubstrates.
Loctite® 4851™ Prism®
Instant Adhesive
FlexibleA medium viscosity, flexible, singlecomponent material for porous orabsorbent substrates, such aspaper and leather.
Loctite® 4861™ Prism®
Instant Adhesive
FlexibleA high viscosity, flexible, singlecomponent, general-purposematerial for gaps up to .008".
BO
ND
ING
• CYA
NO
AC
RY
LAT
E A
DH
ES
IVE
S
13
For Light Cure CyanoacrylateAdhesives, see the LightCure Adhesives sectionbeginning on page 29.
ADDITIONAL OFFERINGS
NEW
NEW
NEW
NEW
NEW
NEW
AS
SE
MB
LY P
RO
DU
CT
SB
ON
DIN
G
• C
YAN
OA
CR
YLA
TE
AD
HE
SIV
ES
14
380™Black Max®
382™Tak Pak®
401™Prism®
403™Prism®
404™Quick Set™
406™Prism®
408™Prism®
409™Super Bonder®
410™Prism®
411™Prism®
414™Super Bonder®
415™Super Bonder®
416™Super Bonder®
420™Super Bonder®
422™Super Bonder®
426™Prism®
430™Super Bonder®
444™Tak Pak®
454™Prism®
380043805038061
38203204203824038261
401044014040161
403044034040361
465514654846561
406044064040661
4084040861
4090421922409454097418030
410044104541061
411044114541161
414044145041461
4155041561
4165041661
4205042061
4225042261
21921183981745117529
430044305043061
122922041912294
4540421925454404547445478
3 gm tube1 oz. bottle1 lb. bottle
3 gm tube20 gm kit†20 gm bottle1 lb. bottle
3 gm tube20 gm bottle1 lb. bottle
3 gm tube20 gm bottle1 lb. bottle
1/3 oz. bottle4 oz. bottle1 lb. bottle
3 gm tube20 gm bottle1 lb. bottle
20 gm bottle1 lb. bottle
3 gm tube10 gm syringe20 gm tube200 gm tube300 gm cartridge
3 gm tube20 gm bottle1 lb. bottle
3 gm tube20 gm bottle1 lb. bottle
3 gm tube1 oz. bottle1 lb. bottle
1 oz. bottle1 lb. bottle
1 oz. bottle1 lb. bottle
1 oz. bottle1 lb. bottle
1 oz. bottle1 lb. bottle
10 gm syringe20 gm tube200 gm tube300 gm cartridge
3 gm tube1 oz. bottle1 lb. bottle
20 gm bottle20 gm kit†1 lb. bottle
3 gm tube10 gm syringe20 gm tube200 gm tube300 gm cartridge
Close fittingparts
Tak Pak®
ultra- performancewire tacking
General purpose
Gap filling
RubberO-ringbonder
Wicking grade
Wicking grade
Generalpurposegel adhesive
Gap filling
Clear gapfilling
Plastic bonder
Gap fillingmetal bonder
Gap fillingplastic bonder
Wicking typeplastic bonder
Gap fillingplastic bonder
Poroussurfaces
Metal bonderfor close fitting parts
Tak Pak®
Wire tackingadhesive
Poroussurfaces
Black
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Black
Clear
Clear
Clear
Clear
Clear
Clear
Black
Clear
Clear
Clear
.006"
.008"
.005"
.008"
.005"
.004"
.002"
.010"
.008"
.008"
.006"
.008"
.008"
.002"
.008"
.010"
.005"
.007"
.010"
LOCTITE® BRAND INSTANT ADHESIVES PROPERTIES CHART
3,750
3,200
3,200
2,600
3,500
3,200
2,600
3,200
3,200
3,200
3,200
3,600
3,200
2,900
3,200
3,000
3,600
3,200
3,200
Typi
cal U
se
Col
or
Gap
Fill
Visc
osity
, cP
Stre
ngth
, psi
*Te
nsile
She
ar
1.10
1.05
1.05
1.10
1.09
1.05
1.05
1.10
1.07
1.07
1.05
1.09
1.05
1.05
1.09
1.10
1.09
1.05
1.05
Spec
ific
Gra
vity
ItemNumber ContainerP R O D U C T
ToughenedEthyl
Generalpurpose
Ethyl
Surface insensitive
Ethyl
Low odor/low bloom
Alkoxy
Generalpurpose
Ethyl
Surface insensitive
Ethyl
Low odor/low bloom
Alkoxy
Generalpurpose
Ethyl
ToughenedEthyl
ToughenedEthyl
Generalpurpose
Ethyl
GeneralpurposeMethyl
Generalpurpose
Ethyl
Generalpurpose
Ethyl
Generalpurpose
Ethyl
ToughenedEthyl
GeneralpurposeMethyl
Generalpurpose
Ethyl
Surface insensitive
Ethyl
200
5,000
110
1,000
80
20
5
Gel
3,500
5,000
110
1,500
1,500
2
2,500
Gel
80
700
Gel
Cat
egor
y
-65°Fto
225°F
-65°Fto
250°F
-65°Fto
180°F
-65°Fto
160°F
-65°Fto
180°F
-65°Fto
180°F
-65°Fto
160°F
-65°Fto
180°F
-65°Fto
225°F
-65°Fto
210°F
-65°Fto
180°F
-65°Fto
180°F
-65°Fto
180°F
-65°Fto
180°F
-65°Fto
180°F
-65°Fto
210°F
-65°Fto
180°F
-65°Fto
180°F
-65°Fto
180°F
Tem
pera
ture
Rang
e
Fixture - 90 sec.Full - 24 hrs.
Fixture - 30 sec.Full - 24 hrs.
Fixture - 15 sec.Full - 24 hrs.
Fixture - 50 sec.Full - 24 hrs.
Fixture - 30 sec.Full - 24 hrs.
Fixture - 15 sec.Full - 24 hrs.
Fixture - 50 sec.Full - 24 hrs.
Fixture - 75 sec.Full - 24 hrs.
Fixture - 90 sec.Full - 24 hrs.
Fixture - 30 sec.Full - 24 hrs.
Fixture - 20 sec.Full - 24 hrs.
Fixture - 30 sec.Full - 24 hrs.
Fixture - 30 sec.Full - 24 hrs.
Fixture - 20 sec.Full - 24 hrs.
Fixture - 30 sec.Full - 24 hrs.
Fixture - 20 sec.Full - 24 hrs.
Fixture - 30 sec.Full - 24 hrs.
Fixture - 30 sec.Full - 24 hrs.
Fixture - 15 sec.Full - 24 hrs.
Cur
e Sp
eed*
*
CFIA
–
CFIA
–
ABS, CFIA, Commercial item std. A-A-3097
Commercial item std. A-A-3097
–
–
CFIA
–
CFIA, Commercial item std. A-A-3097
Commercial item std. A-A-3097
CFIA, Commercial item std. A-A-3097
Commercial item std. A-A-3097
CFIA, Commercial item std. A-A-3097
–
Commercial item std. A-A-3097
Commercial item std. A-A-3097
CFIA, ABS
Agen
cyAp
prov
als
Indicates worldwide availability.A complete line of surface primers, accelerators and cleaners are available to further enhance the performance of Loctite® brand instant adhesives. Refer to the Surface Preparation section.
* Grit blasted steel. ** Varies with substrates.† Contains Loctite® 382™ Tak Pak® Instant Adhesive (20 gm bottle), Loctite® 7452™ Tak Pak® Accelerator (0.7 oz. net wt. aerosol can).
AS
SE
MB
LY P
RO
DU
CT
SB
ON
DIN
G • C
YAN
OA
CR
YLA
TE
AD
HE
SIV
ES
15
455™Prism®
460™Prism®
480™Prism®
493™Super Bonder®
495™Super Bonder®
496™Super Bonder®
498™Super Bonder®
499™Super Bonder®
4203™Prism®
4204™Prism®
4205™Prism®
4210™Prism®
4211™Prism®
4212™Prism®
4471™Prism®
4500™Prism®
4501™Prism®
4502™Prism®
4503™Prism®
4851™Prism®
4861™Prism®
2230917421
460044604046061
4804048061
4935049361
49595
495044955049561
4965049661
4985049861
49904219244994549974
2802628027
2632426325
280282802928030
197571975819759
197611976219763
1976521923197661976719768
447044474044761
35533355343581335814
381463814538147
392313923239233
392133921439170
3773237733
3770837711
10 gm syringe200 gm tube
3 gm tube20 gm bottle1 lb. bottle
20 gm bottle1 lb. bottle
1 oz. bottle1 lb. bottle
.07 fl. oz.Gluematic® Pen3 gm tube1 oz. bottle1 lb. bottle
1 oz. bottle1 lb. bottle
1 oz. bottle1 lb. bottle
3 gm tube10 gm syringe20 gm tube200 gm tube
20 gm tube1 lb. bottle
20 gm tube1 lb. bottle
20 gm tube200 gm tube300 gm cartridge
3 gm tube20 gm bottle1 lb. bottle
3 gm tube20 gm bottle1 lb. bottle
3 gm tube10 gm syringe20 gm tube200 gm tube300 gm cartridge
3 gm tube20 gm bottle1 lb. bottle
3 gm tube20 gm tube200 gm tube300 gm cartridge
3 gm tube20 gm bottle1 lb. bottle
3 gm tube20 gm bottle1 lb. bottle
3 gm tube20 gm bottle1 lb. bottle
20 gm bottle1 lb. bottle
20 gm bottle1 lb. bottle
Poroussurfaces
Close fittingparts
Generalfilling
Wicking typemetal bonder
Generalpurpose
Generalpuposerubber bonder
Thermal cyclingadhesive
Thermal cycling gel adhesive
Close fittingparts
Gap filling
Poroussurfaces
Close fittingparts
Gap filling
Poroussurfaces
Gap filling
Poroussurfaces
Wickinggrade
Generalpurpose
Gap filling
Flexible
Flexible
Clear
Clear
Black
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Black
Black
Black
Clear
Clear
Clear
Clear
Clear
Clear
Clear
.010"
.004"
.006"
.002"
.004"
.006"
.007"
.010"
.005"
.008"
.010"
.005"
.007"
.008"
.007"
.010"
.004"
.005
.007
.006"
.008"
2,600
2,600
3,800
3,600
2,750
3,600
3,000
3,200
2,200
2,100
2,300
3,600
3,600
3,900
3,200
2,760
2,600
2,810
2,910
2,175
2,465
Typi
cal U
se
Col
or
Gap
Fill
Visc
osity
, cP
Stre
ngth
, psi
*Te
nsile
She
ar
1.10
1.10
1.10
1.09
1.05
1.09
1.10
1.10
1.10
1.10
1.10
1.10
1.07
1.05
1.10
1.11
1.10
1.10
1.10
1.10
1.10
Spec
ific
Gra
vity
ItemNumber ContainerP R O D U C T
Low odor/low bloom
Alkoxy
Low odor/low bloom
Alkoxy
ToughenedEthyl
GeneralpurposeMethyl
Generalpurpose
Ethyl
GeneralpurposeMethyl
Generalpurpose
Ethyl
Generalpurpose
Ethyl
Thermallyresistant
Ethyl
Thermallyresistant
Ethyl
Thermallyresistant
Ethyl
Thermallyresistant
Ethyl
Thermallyresistant
Ethyl
Thermallyresistant
Ethyl
Surface insensitive
Ethyl
Surface insensitive
Ethyl
Surface insensitive
Ethyl
Surface insensitive
Ethyl
Surface insensitive
Ethyl
Flexible Alkyl
Flexible Alkyl
Gel
45
300
2
45
125
500
Gel
375
4,000
Gel
160
2,500
11,000
600
Gel
20
100
650
400
4,000
Cat
egor
y
-65°Fto
160°F
-65°Fto
160°F
-65°Fto
210°F
-65°Fto
180°F
-65°Fto
180°F
-65°Fto
180°F
-65°Fto
250°F
-65°Fto
200°F
-65°Fto
250°F
-65°Fto
250°F
-65°Fto
250°F
-65°Fto
250°F
-65°Fto
250°F
-65°Fto
250°F
-65°Fto
180°F
-65°Fto
180°F
-65°Fto
180°F
-65°F to180°F
-65°F to180°F
-65°Fto
212°F
-65°Fto
212°F
Tem
pera
ture
Rang
e
Fixture - 90 sec.Full - 24 hrs.
Fixture - 50 sec.Full - 24 hrs.
Fixture - 90 sec.Full - 24 hrs.
Fixture - 30 sec.Full - 24 hrs.
Fixture - 20 sec.Full - 24 hrs.
Fixture - 30 sec.Full - 24 hrs.
Fixture - 50 sec.Full - 24 hrs.
Fixture - 75 sec.Full - 24 hrs.
Fixture - 30 sec.Full - 24 hrs.
Fixture - 30 sec.Full - 24 hrs.
Fixture - 30 sec.Full - 24 hrs.
Fixture - 120 sec.Full - 24 hrs.
Fixture - 210 sec.Full - 24 hrs.
Fixture - 360 sec.Full - 24 hrs.
Fixture - 10 sec.Full - 24 hrs.
Fixture - 5 sec.Full - 24 hrs.
Fixture - 5 sec.Full - 24 hrs.
Fixture - 5 sec.Full - 24 hrs.
Fixture - 5 sec.Full - 24 hrs.
Fixture - 30 sec.Full - 24 hrs.
Fixture - 25 sec.Full - 24 hrs.
Cur
e Sp
eed*
*
–
–
NSF/ANSI 61
Commercial item std. A-A-3097
Commercial item std. A-A-3097,ABS
Commercial item std. A-A-3097
–
–
–
–
–
CFIA
–
CFIA
–
–
–
–
–
–
–
Indicates worldwide availability.A complete line of surface primers, accelerators and cleaners are available to further enhance the performance of Loctite® brand instant adhesives. Refer to the Surface Preparation section.
* Grit blasted steel. ** Varies with substrates.† Contains Loctite® 444™ Tak Pak® Instant Adhesive (20 gm bottle), Loctite® 7452™ Tak Pak® Accelerator (1.75 fl. oz. bottle).
LOCTITE® BRAND INSTANT ADHESIVES PROPERTIES CHART
Agen
cyAp
prov
als
NEW
NEW
NEW
NEW
NEW
NEW
The Loctite® brand offers a complete line ofone-part and two-part epoxy and urethaneadhesives for structural bonding, potting, andencapsulating.
The Loctite® brand Hysol® line contains a widerange of application-specific products designedto outperform the competition in all aspects:
• Better Adhesion • Improved Clarity• Better Flow • Higher Strength• Less Odor • Greater Durability
From fast setting to high temperatureproperties, Hysol® Epoxy and Urethane adhesivesoffer a variety of performance benefits to meetyour assembly requirements.
EPOXY ADHESIVES
Loctite® E-00CL™ Hysol®
Epoxy Adhesive
Low OdorA clear, flowable, fast setting epoxywith a 5-minute worklife.
Loctite® E-00NS™ Hysol®
Epoxy Adhesive
Non-SagA translucent, controlled flow, lowodor epoxy with a 5-minuteworklife.
Loctite® E-05CL™ Hysol®
Epoxy Adhesive
ToughenedAn ultra clear, high peel, low odorepoxy with a 5-minute worklife.
BONDINGEPOXY & URETHANE ADHESIVES
Loctite® E-20HP™ Hysol®
Epoxy Adhesive
Fast SettingA high strength epoxy with a 20-minute worklife. Off white,toughened, high peel, high shear.
Loctite® E-20NS™ Hysol®
Epoxy Adhesive
Metal BonderA light tan, non-sag, high peel,high shear epoxy with a 20-minuteworklife.
Loctite® E-30CL™ Hysol®
Epoxy Adhesive
Glass BonderAn ultra clear, low viscosity, impactresistant epoxy with a 30-minuteworklife.
Loctite® E-40FL™ Hysol®
Epoxy Adhesive
FlexibleA grey, impact resistant, toughenedepoxy with a 40-minute worklife.
Loctite® E-60HP™ Hysol®
Epoxy Adhesive
ToughenedA high strength epoxy with a 60-minute worklife. Off white, highpeel, high shear.
For the name and number ofyour nearest distributor, call:1-800-LOCTITE (562-8483)
or use the “DistributorLocator” on our web site at
www.loctite.com/distributor
BO
ND
ING
•
EP
OX
Y &
UR
ET
HA
NE
AD
HE
SIV
ES
AS
SE
MB
LY P
RO
DU
CT
S
16
AS
SE
MB
LY P
RO
DU
CT
SB
ON
DIN
G • E
PO
XY
& U
RE
TH
AN
E A
DH
ES
IVE
S
17
Loctite® 9432NA™ Hysol®
Epoxy Adhesive
Non-SagA grey, single component paste,heat cure epoxy. Excellent hightemperature performance, excellentchemical resistance, surfaceinsensitive.
URETHANE ADHESIVES
Loctite® U-05FL™ Hysol®
Urethane Adhesive
High StrengthA two-part, high performanceurethane adhesive for metalbonding with a 5-minute worklife.Off white, highly flexible, impact and moisture resistant, high peel,high shear.
Loctite® U-09FL™ Hysol®
Urethane Adhesive
Highly FlexibleA two-part, high performanceurethane adhesive for plasticbonding with a 10-minute worklife.Ultra clear, impact resistant, high peel.
Loctite® U-09LV™ Hysol®
Urethane Adhesive
Low ViscosityA two-part, high performanceurethane adhesive for plasticbonding with a 10-minute worklife.
Loctite® E-60NC™ Hysol®
Epoxy Adhesive
Non-CorrosiveAn electronics-grade pottingcompound with a 60-minuteworklife. Black, opaque, lowviscosity.
Loctite® E-90FL™ Hysol®
Epoxy Adhesive
FlexibleA grey, impact resistant, toughenedepoxy with a 90-minute worklife
Loctite® E-120HP™ Hysol®
Epoxy Adhesive
Ultra StrengthAn amber, non-sag, aerospacegrade epoxy with a 120-minuteworklife.
Loctite® E-214HP™ Hysol®
Epoxy Adhesive
High StrengthA one-component, heat cure epoxy.Grey, temperature resistant, non-sag.
Loctite® 608™ Hysol®
Epoxy Adhesive
High StrengthA fast setting, low odor epoxy with a 5-minute worklife. Cures at room temperature to form aclear bondline.
Loctite® D609™ Hysol®
Epoxy Adhesive
Ultra ClearA high performance epoxy with a5-minute worklife. Low odor, veryfast room temperature cure, heatresistant to 180°F.
Loctite® 615™ Hysol®
Epoxy Adhesive
SandableA high strength, low odor epoxywith a 10-minute worklife. Blue, fastcure, gap filling.
Loctite® 0151™ Hysol®
Epoxy Adhesive
Ultra ClearA general purpose thixotropic paste epoxy with a 50-minuteworklife. Allows for extendedadjustment time.
Loctite® 9433™ Hysol®
Epoxy Adhesive
Self-LevelingA high strength epoxy with a 30-minute worklife. Cream in color, flowable, toughened, highpeel resistance.
Loctite® 9430™ Hysol®
Epoxy Adhesive
High StrengthAn off white, toughened, lightpaste, high peel, high shearstrength epoxy with a 40-minute worklife.
Loctite® 9460™ Hysol®
Epoxy Adhesive
Non-SagA grey, impact resistant, highviscosity, high peel, high shearepoxy with a 30-minute worklife.
Loctite® 9459™ Hysol®
Epoxy Adhesive
High Temperature ResistanceA one-component, heat cure epoxy. Low viscosity, self-leveling.Light grey, excellent hightemperature performance, excellent chemical resistance.
Equipment is sold separately.Please refer to the Dispensingsection on pages 106 & 107for a complete line of dualcartridge dispensers and mix nozzles.
REQUIRED EQUIPMENT
NEW
E-00CL™Hysol®
E-00NS™Hysol®
E-05CL™Hysol®
608™Hysol®
D609™**Hysol®
615™Hysol®
1C™Hysol®
1C-LV™Hysol®
907™Hysol®
6C™Hysol®
11C™Hysol®
0151™Hysol®
9460F™Hysol®
E-20HP™Hysol®
9433™Hysol®
9430™Hysol®
292892929029291
292942929529296
2929929300293012930229303
83086 83075 83082 83083
83089
8309483095
83200 83202 83201
83208 83207
83098
83211
83186
83069 83176 83179 83178
83225 83224
29314 29315 29316 2931729318
83119
83114 83113
50 ml dual cartridge200 ml dual cartridge400 ml dual cartridge
50 ml dual cartridge200 ml dual cartridge400 ml dual cartridge
50 ml dual cartridge200 ml dual cartridge400 ml dual cartridge5 gallon pail, resin5 gallon pail, hardener
4 gm foil pack50 ml dual cartridgeEPK 2.8 oz. kit5 lb. kit
50 ml dual cartridge
EPK 3.2 oz. kit 12 lb. kit
EPK 4 oz. kit4 lb. kit 17 lb. kit
50 ml dual cartridge 200 ml dual cartridge
EPK 2.2 oz. kit
EPK 4 oz. kit
EPK 4 oz. kit
50 ml dual cartridge EPK 3.3 oz. kit 2.6 lb. kit 10.7 lb. kit
50 ml dual cartridge 200 ml dual cartridge
50 ml dual cartridge200 ml dual cartridge 400 ml dual cartridge 5 gallon pail, resin 5 gallon pail, hardener
50 ml dual cartridge
2 lb. kit 10 lb. kit
Fast settingFlowableLow odor
Non-sagControlled flowLow odor
ToughenedHigh peelLow odor
Fast cure ClearHigh strength
Fast cure Ultra clear High strength
Fast cure Gap filling Sandable
General purposeGap-filling High temperature
General purpose Gap-filling Impact resistant
General purpose Minimal surfacepreparation
General purpose Bonds and sealsMachineableGap-filling
General purpose Bonds and seals Machineable
General purpose Ultra clear Extended work life
Impact resistant High shear High peel
High strength Rubber toughened High peel High shearFast setting
Self-leveling High strength High peel
High strength High peel
Mixed - lowResin: 9,300 cPHardener: 2,700 cP
Mixed - highResin: 375,000 cPHardener: 2,800 cP
Mixed - lowResin: 1,900 cPHardener: 2,800 cP
Mixed - medium Resin: 325,000 cPHardener: 30,000 cP
Mixed - low Resin: 15,000 cP Hardener: 15,000 cP
Mixed - paste Resin: 700,000 cP Hardener:140,000 cP
Mixed - paste Resin: 235,000 cP Hardener: 710,000 cP
Mixed - medium Resin: 82,000 cP Hardener: 36,200 cP
Mixed - medium Resin: 100,000 cP Hardener: 150,000 cP
Mixed - paste Resin: 235,000 cPHardener: 710,000 cP
Mixed - paste Resin: 235,000 cPHardener: 710,000 cP
Mixed - light paste Resin: 70,000 cP Hardener: 60,000 cP
Mixed - paste Resin: 225,000 cP Hardener: 175,000 cP
Mixed - medium Resin: 65,000 cP Hardener: 7,000 cP
Mixed - medium Resin: 174,000 cP Hardener: 115,000 cP
Mixed - light pasteResin: 300,000 cP Hardener: 40 cP
Clear
Translucent
Ultra clear
Clear
Ultra clear
Blue
White
Light tan
Light blue
Grey
Black
Clear
Grey
Off white
Cream
Off white
3-5min.
3-5min.
3-5min.
5min.
5min.
10min.
20min.
20min.
20min.
25min.
25min.
50min.
20min.
20min.
30min.
40min.
1:1
1:1
1:1
1:1
1:1
1:1
2.5:1
2:1
1:1
2.5:1
2.5:1
2.7:1
1:1
2:1
2:1
4:1
LOCTITE® BRAND HYSOL® EPOXY ADHESIVES PROPERTIES CHART
1-5
1-5
5-30
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
40†
20-70
45†
60†
2,000-4,000
2,000-4,000
2,000-4,000
2,000
2,800
2,500
1,750
2,100
3,100
1,750
1,750
1,850
3,800
3,000-5,000
3,800
4,700
Feat
ures
Col
or
Visc
osity
at 2
5°C
CFIA
CFIA
CFIA
–
–
–
–
–
–
–
–
–
–
CFIA
–
–
Agen
cyAp
prov
als
Peel
Str
engt
h, p
iw
Ove
rlap
She
ar
Stre
ngth
,* p
si
20
20
10
–
–
–
98
–
–
98
98
58
–
60
–
–
Tg, °
C
80
80
55
80
75
65
80
75
79
80
80
85
80
80
75
75
Har
dnes
s (S
hore
D)
Mix
Rat
io b
y Vo
lum
e(re
sin:
hard
ener
)
Wor
klife
ItemNumber ContainerP R O D U C T
* Tested on aluminum lap shears. ** Formerly Dexter® Hysol® 609. †ASTM D3167. N/A = Not available at time of printing. EPK = Epoxi-Patch® Kit.
FAST
SE
TT
ING
GE
NE
RA
LP
UR
PO
SE
HIG
HP
ER
FO
RM
AN
CE
BO
ND
ING
•
EP
OX
Y &
UR
ET
HA
NE
AD
HE
SIV
ES
AS
SE
MB
LY P
RO
DU
CT
S
18
9460™Hysol®
E-40FL™Hysol®
9462™Hysol®
E-60HP™Hysol®
E-90FL™Hysol®
9460PB™Hysol®
E-120HP™Hysol®
9739™Hysol®
E-20NS™Hysol®
E-30CL™Hysol®
E-60NC™Hysol®
9412™Hysol®
9459™Hysol®
E-214HP™Hysol®
9432NA™Hysol®
83129 83128 83131 83130 83133 83134
293042930529306
83142 83135
29319 29320** 2932129322 29323
2930929310**29311
83233 83232
29353 29354 29355 29356 29357
83149 83150
293342933529336
29329 29330 29331
293242932529326
83108 83107
83126
2933929340
8321783216
50 ml cartridge 200 ml cartridge 5 lb. kit 20 lb. kit 50 lb. pail, hardener 50 lb. pail, resin
50 ml dual cartridge 200 ml dual cartridge 400 ml dual cartridge
50 ml cartridge 200 ml cartridge
50 ml dual cartridge 200 ml dual cartridge 400 ml dual cartridge 5 gallon pail, resin5 gallon pail, hardener
50 ml dual cartridge 200 ml dual cartridge 400 ml dual cartridge
5 lb. kit 20 lb. kit
50 ml dual cartridge 200 ml dual cartridge 400 ml dual cartridge 5 gallon pail, resin5 gallon pail, hardener
42 lb. pail, hardener168 lb. pail, resin
50 ml dual cartridge200 ml dual cartridge400 ml dual cartridge
50 ml dual cartridge 200 ml dual cartridge 400 ml dual cartridge
50 ml dual cartridge 200 ml dual cartridge 400 ml dual cartridge
2 lb. kit10 lb. kit
10 lb. can
30 ml cartridge 300 ml cartridge
2 lb. can55 lb. pail
High peelImpact resistant High viscosity Non-sag
Toughened FlexibleImpact resistant
Impact Resistant Toughened Non-sag
High strengthToughenedHigh peelHigh shear
Toughened FlexibleImpact resistant
Bonds printing blanket stock High strength
Ultra strength Non-sag Aerospace grade
High temperature resistance High chemical resistance
Metal bonderNon-sag High peelHigh shear
Glass bonder Low viscosity Impact resistant
Potting††Electrically non-corrosive Low viscosity
Potting†† High strengthSelf-leveling
High temperatureresistance Self-leveling High chemical resistance
High strength Temperature resistant Non-sag
Non-sag Surface insensitive High temperature
Mixed - paste Resin: 225,000 cPHardener: 175,000 cP
Mixed - medium Resin: 75,000 cP Hardener: 65,500 cP
Mixed - medium Resin: 82,500 cP Hardener: 52,500 cP
Mixed - medium Resin: 67,500 cP Hardener: 7,000 cP
Mixed - medium Resin: 71,500 cPHardener: 19,000 cP
Mixed - pasteResin: 225,000 cP Hardener: 100,000 cP
Mixed - high Resin: 41,500 cP Hardener: 2,800 cP
Mixed - paste Resin: 1,400,000 cPHardener: 2,250,000 cP
Mixed - paste Resin: 60,000 cP Hardener: 30,000 cP
Mixed - low Resin: 10,500 cP Hardener: 2,200 cP
Mixed - low Resin: 6,200 cP Hardener: 13,000 cP
Mixed - low Resin: 15,000 cP Hardener: 40 cP
Low 39,000 cP
Paste150,000 cP
Paste 225,000 cP
Grey
Grey
Beige
Off-White
Grey
Grey
Amber
Black
Light tan
Ultra clear
Black opaque
Pink
White
Grey
Grey
40min.
40min.
50min.
60min.
90min.
100min.
120min.
90min.
20min.
30min.
60min.
60min.
60min.
Heat cure
N/A
1:1
1:1
1:1
2:1
1:1
1:1
2:1
3.3:1
2:1
2:1
1:1
3.5:1
1part
1part
1part
35†
5-40
20†
20-70
5-40
N/A
20-50
N/A
5-30
5-30
1-5
35†
N/A
30-70
8
3,200
1,000-3,000
3,500
3,000-5,000
1,000-3,000
2,000
3,000-6,000
2,500
2,000-4,000
2,000-4,000
1,000-3,000
4,000
3,000
3,000-6,000
3,800
Feat
ures
Col
or
Visc
osity
at 2
5°C
Peel
Str
engt
h,*
piw
Ove
rlap
She
ar
Stre
ngth
,* p
si
–
30
–
70
-5
–
90
–
87
70
55
–
–
120
–
Tg, °
C
80
75
77
80
60
–
85
–
90
85
85
75
–
85
90
Har
dnes
s (S
hore
D)
–
CFIA
–
CFIA
CFIA
–
CFIA
–
CFIA
CFIA
CFIA
–
–
–
–
Agen
cy
Appr
oval
s
Mix
Rat
io b
y Vo
lum
e(re
sin:
hard
ener
)
Wor
klife
ItemNumber ContainerP R O D U C T
* Tested on aluminum lap shears. † ASTM D3167. †† For additional potting and encapsulating products, refer to page 40. N/A = Not available at time of printing.** Made-to-order item.
HIG
HP
ER
FO
RM
AN
CE
HIG
HTE
MP.
AD
HE
SIO
NSP
EC
IFIC
PO
TTIN
GO
NE
-PA
RT
LOCTITE® BRAND HYSOL® EPOXY ADHESIVES PROPERTIES CHART
BO
ND
ING
• EP
OX
Y &
UR
ET
HA
NE
AD
HE
SIV
ES
AS
SE
MB
LY P
RO
DU
CT
S
19
BO
ND
ING
•
EP
OX
Y &
UR
ET
HA
NE
AD
HE
SIV
ES
AS
SE
MB
LY P
RO
DU
CT
S
20
U-05FL™Hysol®
U-09FL™Hysol®
U-09LV™Hysol®
293482934929350
29460294612946229370**29371**
385883858938590**38591**
50 ml dual cartridge200 ml dual cartridge400 ml dual cartridge
50 ml dual cartridge200 ml dual cartridge400 ml dual cartridge5 gallon pail, resin5 gallon pail, hardener
50 ml dual cartridge200 ml dual cartridge5 gallon pail, resin5 gallon pail, hardener
Metal bonderHighly flexibleHigh strength
Plastic bonderHighly flexibleHigh peel
Plastic bonderHighly flexibleHigh peelLow viscosity
Mixed - lowResin: 640 cPHardener: 35,000 cP
Mixed - lowResin: 10,000 cPHardener: 1,150 cP
Mixed - very lowResin: 920 cPHardener: 1,030 cP
Off white
Ultra clear
Ultra clear
5minutes
10minutes
10minutes
1:2
1:1
1:1
LOCTITE® BRAND HYSOL® URETHANE ADHESIVES PROPERTIES CHART
5-30
5-30
N/A
1,000-3,000
500-2,000
500-2,000
Feat
ures
Col
or
Visc
osity
zt 2
5°C
Peel
Str
engt
h,*
piw
Ove
rlap
She
ar
Stre
ngth
,* p
si
48
-20
N/A
Tg °C
45
45
45
Har
dnes
s (S
hore
D)
CFIA
–
–
Agen
cyAp
prov
als
Mix
Rat
io b
y Vo
lum
e(re
sin:
hard
ener
)
Wor
klife
ItemNumber ContainerP R O D U C T
* Varies with substrates.** Made-to-order item.
PO
LYU
RE
TH
AN
ES
NEW
BO
ND
ING
• EP
OX
Y &
UR
ET
HA
NE
AD
HE
SIV
ES
AS
SE
MB
LY P
RO
DU
CT
S
21
Metals Thermo- Thermoset Rubber Glass Ceramic Masonry Wood Leather Paper/Plastics Plastics Hardboard
Metals E-20NS™ U-05FL™ E-20NS™ U-05FL™ E-30CL™ E-20HP™ E-20HP™ E-00NS™ U-05FL™ E-05CL™
E-214HP™ E-40FL™ E-20HP™ E-40FL™ E-20NS™ E-30CL™ E-120HP™ E-20HP™ E-40FL™ E-40FL™
U-05FL™ E-20HP™ E-120HP™ U-09LV™ U-05FL™ E-20NS™ E-20NS™ E-40FL™ U-09LV™ E-00CL™
9430™ 608™ 9460™ 0151™ 9430™ 9432NA™ 608™ 9460™ D609™
Thermo- U-05FL™ U-05FL™ U-05FL™ U-05FL™ U-05FL™ U-05FL™ E-40FL™ E-05CL™ U-05FL™ E-05CL™
Plastics E-40FL™ U-09LV™ U-09LV™ E-40FL™ U-09LV™ U-09LV™ E-05CL™ E-40FL™ U-09LV™ E-40FL™
E-20HP™ E-40FL™ E-40FL™ U-09LV™ E-40FL™ E-40FL™ E-20HP™ E-20HP™ E-40FL™ E-20HP™
615™ 615™ 615™ 9460™ 9460™ 9460™ 615™ 11C™ 9460™ 9433™
Thermoset E-20HP™ U-05FL™ E-20HP™ U-05FL™ E-30CL™ E-30CL™ E-20HP™ E-20HP™ E-05CL™ E-40FL™
Plastics E-20NS™ U-09LV™ E-120HP™ E-20HP™ U-05FL™ E-20HP™ E-120HP™ E-40FL™ U-09LV™ E-00CL™
E-120HP™ E-40FL™ E-214HP™ E-40FL™ E-00CL™ E-40FL™ E-00CL™ E-00NS™ E-40FL™ U-05FL™
615™ 615™ 615™ 9460™ 0151™ 9433™ 9432NA™ 11C™ 615™ D609™
Rubber U-05FL™ U-05FL™ U-05FL™ E-40FL™ U-05FL™ U-05FL™ E-40FL™ E-40FL™ U-05FL™ E-40FL™
E-40FL™ U-09LV™ E-40FL™ E-90FL™ E-40FL™ E-40FL™ E-90FL™ E-05CL™ U-09LV™ E-05CL™
U-09LV™ E-40FL™ E-20HP™ U-05FL™ U-09LV™ U-09LV™ E-05CL™ E-20HP™ E-40FL™ U-09LV™
9460™ 9460™ 9433™ 9460™ 9460™ 9460™ 9460™ 9433™ 9460™ 9460™
Glass E-20NS™ U-05FL™ E-00CL™ E-05CL™ E-30CL™ E-30CL™ E-30CL™ E-30CL™ E-40FL™ E-05CL™
E-30CL™ U-09LV™ E-30CL™ U-05FL™ E-00CL™ E-20NS™ E-00NS™ E-40FL™ E-05CL™ E-40FL™
U-05FL™ E-40FL™ U-05FL™ U-09LV™ U-09LV™ U-05FL™ E-20HP™ E-00CL™ U-09LV™ E-30CL™
0151™ 9460™ D609™ 615™ D609™ 0151™ 0151™ D609™ 615™ 9460™
Ceramic E-20NS™ U-05FL™ E-40FL™ U-05FL™ E-30CL™ E-20HP™ E-00NS™ E-20HP™ E-40FL™ E-40FL™
E-30CL™ U-09LV™ E-20HP™ U-09LV™ E-00CL™ E-30CL™ E-20HP™ E-40FL™ E-05CL™ E-05CL™
E-20HP™ E-40FL™ E-30CL™ E-40FL™ U-05FL™ E-120HP™ E-20NS™ E-00NS™ U-09LV™ E-00CL™
9430™ 9460™ 9433™ 9460™ D609™ 9433™ 608™ 608™ 9460™ D609™
Masonry E-20NS™ E-40FL™ E-20HP™ E-40FL™ E-30CL™ E-00NS™ E-20HP™ E-20HP™ E-05CL™ E-05CL™
E-20HP™ E-20HP™ E-120HP™ E-90FL™ E-00NS™ E-20HP™ E-00NS™ E-00NS™ E-40FL™ E-00CL™
E-120HP™ E-05CL™ E-00CL™ E-05CL™ E-20HP™ E-20NS™ E-120HP™ E-40FL™ U-05FL™ E-20HP™
9433™ 9433™ D609™ 615™ 0151™ 9433™ 608™ 9433™ 9460™ D609™
Wood E-20HP™ E-40FL™ E-20HP™ E-40FL™ E-30CL™ E-20HP™ E-20HP™ E-00CL™ E-05CL™ E-00CL™
E-40FL™ E-05CL™ E-40FL™ E-05CL™ E-40FL™ E-40FL™ E-00NS™ E-20HP™ E-40FL™ E-20HP™
E-00NS™ E-20HP™ E-00NS™ E-20HP™ E-00CL™ E-00NS™ E-40FL™ E-40FL™ E-90FL™ E-40FL™
9433™ 11C™ 11C™ 9433™ 0151™ 608™ 608™ 11C™ 615™ D609™
Leather E-40FL™ U-05FL™ E-05CL™ U-05FL™ E-40FL™ E-40FL™ E-05CL™ E-05CL™ U-05FL™ E-05CL™
U-05FL™ U-09LV™ U-09LV™ U-09LV™ E-05CL™ E-05CL™ E-40FL™ E-40FL™ U-09LV™ E-40FL™
U-09LV™ E-40FL™ E-40FL™ E-40FL™ U-09LV™ U-09LV™ U-05FL™ E-90FL™ E-40FL™ U-05FL™
9460™ 9460™ 9460™ 9460™ 9460™ 9460™ 615™ 9460™ 9460™ 9460™
Paper/ E-40FL™ E-40FL™ E-40FL™ E-40FL™ E-05CL™ E-40FL™ E-05CL™ E-00CL™ E-05CL™ E-05CL™
Hardboard E-05CL™ E-05CL™ E-05CL™ E-05CL™ E-40FL™ E-05CL™ E-00CL™ E-20HP™ E-40FL™ E-40FL™
E-00CL™ E-20HP™ U-05FL™ U-09LV™ E-30CL™ E-00CL™ E-20HP™ E-40FL™ U-05FL™ E-00CL™
D609™ 9433™ 9460™ 9460™ 0151™ D609™ D609™ 9460™ 615™ D609™
SUBSTRATE SELECTOR GUIDE
Loctite® brand Hysol® Structural Adhesives Bond to a Variety of Substrates
Simply determine which substrates you’re bonding and find the adhesive recommendations in the table below. Refer to the previous charts for typical performance properties of the recommended adhesive. Theserecommendations should be used as a starting point only. It is recommended to evaluate the selected product in yourapplication to determine suitability.
Thermoplastics: ABS, PC, Acrylic, Nylon, SAN, PVC Thermoset Plastics: Epoxy, Phenolic, Polyester, DAP Rubber: Butyl, Neoprene, Nitrile, SBR, Natural, EPDM
BO
ND
ING
•
FIB
ER
OP
TIC
AD
HE
SIV
ES
AS
SE
MB
LY P
RO
DU
CT
S
22
Loctite® brand adhesives are specified by theworld’s leading fiber optic componentmanufacturers. With the most diversified line ofadhesives and sealants in the industry, Henkeloffers Loctite® brand products to meet yourspecific needs. Whether you are manufacturingmodulators, collimators, amplifiers, beam splitters,switches, etc., Henkel is the best resource for fiberoptics assistance. Loctite® brand adhesives providedesign advantages, speed assembly time, andincrease production efficiency and quality.
Loctite® 3400™ OptiLOC®
Fiber Optic Epoxy Adhesive
A low viscosity, fast curing epoxy.Once mixed, this two-part epoxycures at room temperature or withheat to form a dark blue rigidpotting and sealing material.
Loctite® 3401™ OptiLOC®
Fiber Optic Epoxy Adhesive
A low viscosity, impact absorbingepoxy with enhanced dielectricproperties. Designed for bondingoptical connectors, fibers, lenses,and other optical components.
BONDINGFIBER OPTIC ADHESIVES
Loctite® 3402™ OptiLOC®
Fiber Optic Epoxy Adhesive
A low viscosity, general purposeimpact absorbing epoxy adhesivewith an extended pot life and highglass transition temperature.Develops strong bonds toaluminum, ceramic, glass, andselect plastics.
Loctite® 3403™ OptiLOC®
Fiber Optic Epoxy Adhesive
A medium viscosity, impactabsorbing epoxy adhesive with amoderate pot life. Once mixed, thistwo-part epoxy cures at roomtemperature or with heat to form an amber, rigid potting and sealing material.
Loctite® 661™ AnaerobicAdhesive
Slip Fit/UV CureA fast curing, high strengthretaining compound. Achievesfixture strength in 5 minutes or in15 seconds by exposing edge fillets to high intensity long wavelengthUV light. Offers secondary roomtemperature cure for shadowedareas.
BO
ND
ING
• FIBE
R O
PT
IC A
DH
ES
IVE
SA
SS
EM
BLY
PR
OD
UC
TS
23
3345™
3491™
3492™
3526™
33417
28366
28367
30756
25 ml syringe
25 ml syringe
25 ml syringe
25 ml syringe
1,500
1,100
500
17,800
UV/visible
UV
UV
UV/visible/heat
>95 / >90
>90 / >90
>90 / >90
>90 / >90
37,000
288,000
200,000
42,000
LOCTITE® BRAND LIGHT CURE ACRYLIC ADHESIVES PROPERTIES CHART
53
75
79
62
Cur
e Ty
pe
Clear/straw
Clear/straw
Clear/straw
Clear/straw
Col
or
Visc
osity
,1 c
P
Har
dnes
s4
(Sho
re D
)
53
63
64
64
Tg, °
C5
95
100
90
110
CTE
,6 p
pm/°
C
1.5
1.51
1.51
1.51
Refr
activ
e In
dex7
1.9
1.98
1.93
2.14
Line
ar
Shri
nkag
e,8
%
Mod
ulus
,3 p
si
250
27
5
185
Elon
gatio
n,3
%
% T
rans
mis
sion
2 N
IR /
Vis
ible
ItemNumber ContainerP R O D U C T
3407™ OptiLOC® 35173 30 ml syringe 125 g/min*Heat NA
LOCTITE® BRAND SILICONE ADHESIVES PROPERTIES CHART
33
Cur
e Ty
pe
Black
Col
or
Visc
osity
,1 c
P
Har
dnes
s4
(Sho
re A
)
-48
Tg, °
C5
275
CTE
,6 p
pm/°
C
% T
rans
mis
sion
2 N
IR /
Vis
ible
ItemNumber ContainerP R O D U C T
* Extrusion Rate.
661™ 66141 250 ml bottle
KEY1 - Brookfield, 25°C2 - ASTM E 1790 NIR (1000-2000 nm)Loctite® ARM 1122 VIS (420-1000 nm)3 - ASTM D 8824 - ASTM D 22405 - ASTM E 15456 - ASTM E 831, pre Tg7 - ASTM D 5428 - ASTM D 7929 - ASTM E 831, post Tg
500UV/primer/heat 3,500 65°F to 300°F
LOCTITE® BRAND ANAEROBIC ADHESIVES PROPERTIES CHART
Cur
e Ty
pe
Amber
Col
or
Visc
osity
,1 c
P
Tem
pera
ture
R
ange
Shea
r St
reng
th
Stee
l/St
eel,
psi
ItemNumber ContainerP R O D U C T
0151™ Hysol®
3337™
3340™
3400™ OptiLOC®
3401™ OptiLOC®
3402™ OptiLOC®
3403™ OptiLOC®
83176
36057
36906
32545
32546
32547
32550
EPK 3.3 oz. kit
25 ml syringe
25 ml syringe
2.5 gram twin-pak
2.5 gram twin-pak
2.5 gram twin-pak
2.5 gram twin-pak
70,000/60,000
5,000
5,000
3,500/2,400
8,300/80
2,000/400
79,000/29,000
Rt 2 pt
Flexible cationic
Rigid cationic
Rt 2 pt
Rt 2 pt
Heat 2 pt
Rt 2 pt
>95 / >90
>85
>85
>90 / NA
>90 / NA
>95 / NA
>90 / >85
300,000
6,000
310,000
290,000
275,000
340,000
290,000
LOCTITE® BRAND EPOXY ADHESIVES PROPERTIES CHART
85
55
90
85
84
90
90
Cur
e Ty
pe
Clear
Clear
Slightly hazy
Blue
Blue
Red/amber
Amber
Col
or
Visc
osity
,1 c
P
Har
dnes
s4
(Sho
re D
)
84*
35
114
122*
89*
120*
80*
Tg, °
C5
70
62
58
54
63
56
73
CTE
,6 p
pm/°
C
1.56
1.55
1.54
NA
NA
NA
NA
Refr
activ
e In
dex7
1.6
1.3
1.6
1.7
1.7
1.5
1.7
Line
ar
Shri
nkag
e,8
%
Mod
ulus
,3 p
si
% T
rans
mis
sion
2 N
IR /
Vis
ible
ItemNumber ContainerP R O D U C T
* Optimal Cure Conditions.
Indicates worldwide availability.
See the Equipment Section for a full line ofLoctite® brand Dispensing and Curing systems.
BO
ND
ING
•
HO
T M
ELT
AD
HE
SIV
ES
AS
SE
MB
LY P
RO
DU
CT
S
24
Loctite® brand Hysol® Hot Melt Adhesives weredeveloped to bond a variety of substrates,including difficult-to-bond plastics. Theseadhesives can handle today’s toughestapplications in a broad range of industries.Hysol® Hot Melts are ideal for applications thatrequire high speed manufacturing, bondingversatility, very large gap filling, fast greenstrength, and minimal shrinkage. Hysol® HotMelts are solvent-free, environmentally friendlymaterials with no harmful VOCs.
Loctite® 3631™ Hysol®
Hot Melt Adhesive
UrethaneA toughened, high strengthadhesive for use on plastics.Flexible bond with an open time of60 seconds.
Loctite® 3651™ Hysol®
Hot Melt Adhesive
PolyolefinAn adhesive for plastic bonding.Ideal for polyethylene andpolyolefin plastics. Long open timeof 80-100 seconds.
BONDING HOT MELT ADHESIVES
Loctite® 7460™ Hysol®
SprayPac® Polyshot™
Hot Melt Adhesive
PolyamideFormulated for spray applications.High heat resistance and fast settime. Suitable for bonding foams,fabric, and wood.
Loctite® 7500™ Hysol®
SprayPac® Polyshot™
Hot Melt Adhesive
PolyamideFormulated for long open time andhigh output for bonding surfacesup to 15 square feet.
Loctite® 7809FR™ Hysol®
Hot Melt Adhesive
PolyamideModified with fire retardantmaterials. It has a UL 94V-Oflammability rating.
Loctite® 7811™ Hysol®
Hot Melt Adhesive
PolyamideA high performance polyamide withexceptional high temperatureresistance and impact at lowtemperatures.
Loctite® 7901™ Hysol®
Hot Melt Adhesive
PolyamideLow viscosity polyamide usedextensively for potting andencapsulating.
BO
ND
ING
• HO
T M
ELT
AD
HE
SIV
ES
AS
SE
MB
LY P
RO
DU
CT
S
25
Loctite® 1X™ Hysol®
Hot Melt Adhesive
EVA BasedMedium to fast setting,recommended for bonding paper,wood, fabric, and foam.
Loctite® 3X™ Hysol® Polyshot™
Hot Melt Adhesive
EVA BasedUsed extensively for bonding sandmolds and other poroussubstrates.
Loctite® 232™ Hysol®
Hot Melt Adhesive
EVA BasedA medium setting adhesive with anopen time of 15 seconds.
Loctite® 236™ Hysol®
Hot Melt Adhesive
EVA BasedClear, toughened, flexible EVAbased adhesive with superiorwetting properties.
Loctite® 1942™ Hysol®
Hot Melt Adhesive
EVA BasedMedium setting, general purposehot melt adhesive. Excellentadhesion to wood and many plastics.
Loctite® 0420™ Hysol®
SprayPac® Polyshot™
Hot Melt Adhesive
EVA BasedFormulated for spray applications.Has an open time of 2 minuteswhen sprayed and 45 secondswhen bead applied.
Loctite® 0430™ Hysol®
SprayPac® Polyshot™
Hot Melt Adhesive
EVA BasedSuitable for bonding expandedpolystyrene, polyethylene, andurethane foams. Can be used inapplications where solvent-basedaerosols are used.
Loctite® 0437™ Hysol®
SprayPac® Hot Melt Adhesive
EVA BasedFormulated to be spray applied to awide variety of substrates.
Loctite® 0450™ Hysol®
SprayPac® Polyshot™
Hot Melt Adhesive
EVA BasedFormulated for spray applications,this adhesive is well suited for useon expanded polystyrene orurethane foams.
Loctite® 0452™ Hysol®
SprayPac® Hot Melt Adhesive
EVA BasedFormulated to be spray applied to awide variety of substrates. Excellentfor bonding expanded polystyreneor urethane foams.
Loctite® CoolMelt™ Hysol®
Hot Melt Adhesive
EVA BasedFlexible material designed to beapplied at low temperatures. Idealfor bonding heat sensitive parts.
Loctite® QuikPac™ Hysol®
Hot Melt Adhesive
EVA BasedFast setting material with a 15second open time.
Loctite® SuperPac™ Hysol®
Hot Melt Adhesive
EVA BasedA medium setting material with a 30second open time, it is formulatedto bond cardboard and foams.
Loctite® WaxPac™ Hysol®
Hot Melt Adhesive
EVA Based Medium setting flexible basedmaterial formulated to bond waxcoated substrates and withstandlow temperatures.
For related dispensingequipment, see pages 108–110 in the Equipmentsection of this catalog.
ADDITIONAL OFFERINGS
BO
ND
ING
•
HO
T M
ELT
AD
HE
SIV
ES
AS
SE
MB
LY P
RO
DU
CT
S
26
1X™ Hysol®
3X™ Hysol®
342™ Hysol®
740™ Hysol®
O420™ Hysol®SprayPac®
O430™ Hysol®SprayPac®
0430™ Red Hysol® SprayPac®
O437™ Hysol®SprayPac®
O450™ Hysol®SprayPac®
O450™ RedHysol® SprayPac®
0452™ Hysol®SprayPac®
1942™ Hysol®
6002™ Hysol®
CoolMelt™ Hysol®
SuperPac™ Hysol®
QuikPac™ Hysol®
WaxPac™ Hysol®
833578335883359833608336283364833658336783368
8336983370
83255
83260832618326383264
83346
8334883349
8335083351
8325683352
8335383354
8335583356
83257
8326683267832688326983271832728327383274832758327683277
832808328383285
8339383394
83402834038340483405
8339583397833988339983400
8340883410
Sample 5 lb. pellets40 lb. carton pelletsMaxistick™ sample 7 oz. bagMaxistick™ 35 lb. cartonPT™ stick 35 lb. cartonSuperstick™ sample 10" 5 oz. bagSuperstick™ 10" 25 lb. cartonPolyshot™ 12 oz. bagPolyshot™ 35 lb. carton
Polyshot™ sample 12 oz. bagPolyshot™ 35 lb. carton
Polyshot™ 35 lb. carton
Superstick™ sample 10" 5 oz. bagSuperstick™ 10" 25 lb. cartonPolyshot™ sample 12 oz. bagPolyshot™ 35 lb. carton
12 oz. Polyshot™ sample bag
Polyshot™ 12 oz. sample bagPolyshot™ 35 lb. carton
Polyshot™ 12 oz. sample bagPolyshot™ 35 lb. carton
21 lb. carton pucks36 lb. carton bricks
Polyshot™ 12 oz. sample bagPolyshot™ 35 lb. carton
Polyshot™ 12 oz. sample bagPolyshot™ 35 lb. carton
21 lb. SprayPac® pucks
5 lb. sample bag pellets40 lb. carton pelletsMaxistick™ sample 7 oz. bagMaxistick™ 35 lb. cartonPT™ stick 35 lb. cartonMinistick™ 35 lb. cartonSuperstick™ sample 10" 5 oz. bagSuperstick™ 10" 25 lb. cartonSuperstick™ 4" 25 lb. cartonPolyshot™ sample 12 oz. bagPolyshot™ 35 lb. carton
PT™ stick sample 8 oz. bagSuperstick™ 10" 25 lb. cartonPolyshot™ 35 lb. carton
CoolMelt™ Maxistick™ sample 7 oz. bagCoolMelt™ Maxistick™ 35 lb. carton
Maxistick™ sample 7 oz. bagMaxistick™ 35 lb. cartonPolyshot™ sample 12 oz. bagPolyshot™ 35 lb. carton
Sample pellets 5 lb. bagMaxistick™ sample 7 oz. bagMaxistick™ 35 lb. cartonPolyshot™ sample 12 oz. bagPolyshot™ 35 lb. carton
Maxistick™ sample 7 oz. bagPolyshot™ sample 12 oz. bag
Lightyellow
–
–
–
Cream
Cream
Pink
Cream
Natural
Pink
Natural
Tan
Amber
Off white
Lightyellow
Lightyellow
–
370
580
800
750
–
280
280
270
–
–
–
250
700
195
280
–
730
LOCTITE® BRAND HYSOL® HOT MELT ADHESIVES PROPERTIES CHART
Col
or
2,000
4,000
8,250
9,000
10,500
5,000
5,000
5,200
4,500
4,500
4,300
5,000
3,500
7,200
5,750
4,645
2,700
Visc
osity
cP
at D
ispe
nse
Tem
pera
ture
FDA CFR175.105
FDA CFR175.105 FDA CFR175.105
FDA CFR175.105
–
–
–
–
–
–
–
FDA CFR175.105
FDA CFR175.105
FDA CFR175.105
FDA CFR175.105
FDA CFR175.105
FDA CFR175.105
Agen
cyAp
prov
als
Tens
ile
Stre
ngth
, psi
15seconds
60seconds
5seconds
10seconds
2 minutessprayed
3.5 minutessprayed
3.5 minutessprayed
3.5 minutessprayed
5-8minutes
5-8minutes
5-8minutes
30seconds
10seconds
15seconds
30seconds
15seconds
30seconds
Ope
n Ti
me
150°F
135°F
166°F
168°F
153°F
170°F
170°F
170°F
156°F
156°F
156°F
142°F
150°F
140°F
144°F
174°F
150°F
Tem
pera
ture
Re
sist
ance
ItemNumber ContainerP R O D U C T
90
300
60
75
–
–
–
–
–
–
–
500
200
800
200
–
–
% E
long
atio
n
–
–
–
–
–
75
75
75
–
–
–
–
–
–
–
–
–
Har
dnes
s(S
hore
A)
BO
ND
ING
• HO
T M
ELT
AD
HE
SIV
ES
AS
SE
MB
LY P
RO
DU
CT
S
27
232™Hysol®
236™Hysol®
740LV™Hysol®
3631™Hysol®
3651™Hysol®
4046™Hysol®
7460™ Hysol®SprayPac®
7500™ Hysol®SprayPac®
7803™ Hysol®
7804™ Hysol®
7804FRM-HV™ Hysol®
7809FR™ Hysol®
7811™ Hysol®
7901™ Hysol®
Superstick™
Maxistick™
Polyshot™
83237832398324183244832458324683247
8325183252
8337383374
3129131279
31303
8327883279
83308
8331283313
83323
833258332683327833288332983330
8338283383833848338683387
833888339083391
833378333983340
83341833428334383344
.50"
.75"
1.75"
4" & 10"
2.4"
1.5"
98030, 98031, 98032, 98029
98033, 98034
98035, 98036, 98040, 98037, 98041
5 lb. sample bag pellets40 lb. carton pelletsMaxistick™ 35 lb. cartonSuperstick™ 10" sample 5 oz. bagSuperstick™ 10" 25 lb. cartonPolyshot™ sample 12 oz. bagPolyshot™ 35 lb. carton
Superstick™ sample 10" 5 oz. bagSuperstick™ 10" 25 lb. carton
40 lb. carton pelletsPolyshot™ 35 lb. carton
300 ml cartridge5 gallon pail
12 kg squares
Polyshot™ sample 12 oz. bagPolyshot™ 35 lb. carton
Polyshot™ 25 lb. pail
Polyshot™ sample 13 oz. bagPolyshot™ 25 lb. pail
Polyshot™ 25 lb. pail
5 lb. bag sample pellets40 lb. carton pelletsSuperstick™ sample 10" 5 oz. bagSuperstick™ 10" 32 lb. cartonPolyshot™ sample 13 oz. bagPolyshot™ 25 lb. pail
40 lb. carton pelletsSuperstick™ 10" sample 5 oz. bagSuperstick™ 10" 30 lb. pailPolyshot™ sample 13 oz. bagPolyshot™ 25 lb. pail
5 lb. bag sample pelletsSuperstick™ sample 10" 13 oz. bagPolyshot™ 13 oz. bag
5 lb. bag sample pelletsPolyshot™ sample 13 oz. bagPolyshot™ 25 lb. pail
5 lb. bag sample pellets40 lb. carton pelletsPolyshot™ sample 13 oz. bagPolyshot™ 25 lb. pail
Clear
Clear
–
Off white
Beige
Cream
Pale/Amber
Pale/Amber
Amber
Amber
Off white
Amber
Amber
Amber
–
213
700
1,800
334
120
–
–
380
340
245
363
400
260
Col
or
11,000
8,500
3,500
12,000
10,000
19,000
6,700
1,900
1,450
7,500
6,000
7,000
6,400
750
Visc
osity
cP
at D
ispe
nse
Tem
pera
ture
FDA CFR175.105
FDA CFR175.105
FDA CFR175.105
–
–
–
–
–
–
–
UL Listedfor U.S.
–
–
–
Agen
cyAp
prov
als
Tens
ile
Stre
ngth
, psi
15seconds
25seconds
10seconds
60seconds
80-100seconds
60seconds
30seconds
2minutes
20seconds
35seconds
35seconds
35seconds
35seconds
35seconds
Ope
n Ti
me
153°F
140°F
215°F
250°F
266°F
120°F
210°F
200°F
248°F
220°F
220°F
240°F
266°F
300°F
Tem
pera
ture
Re
sist
ance
ItemNumber ContainerP R O D U C T
–
450
80
940
790
1400
–
–
–
900
300
373
1,200
80
% E
long
atio
n
–
–
–
91
55
40
–
–
–
74
–
85
–
84
Har
dnes
s(S
hore
A)
LOCTITE® BRAND HYSOL® HOT MELT STICK SIZE/DIAMETER CHART
Description Diameter Lengths Loctite® Brand Applicators by Item #
LOCTITE® BRAND HYSOL® HOT MELT ADHESIVES PROPERTIES CHART
BO
ND
ING
•
LIG
HT
CU
RE
AD
HE
SIV
ES
AS
SE
MB
LY P
RO
DU
CT
S
28
Versatile Loctite® brand ultraviolet (UV) andvisible light curing adhesives can be used inbonding, encapsulating, coating, tacking andsealing applications. These single-component,solvent-free products cure in seconds whenexposed to UV/visible light sources. Some lightcure adhesives can be combined with activator curing methods to meet specific application requirements.
ACRYLIC ADHESIVES
Loctite® 352™
Light Cure Adhesive
A high viscosity adhesive thatcreates a tough, flexible bondresistant to vibration and shock.Effective on a wide range ofmaterials. Cures in minutes usingan activator, UV light, or both.
Loctite® 3103™
Light Cure Adhesive
Thixotropic, flexible, low modulus,medium viscosity, UV/visible lightcure adhesive for flexible bondsand reduced stress cracking onplastics. Cures through UV blockedand tinted substrates. Also forpotting, sealing, and gap filling.
BONDINGLIGHT CURE ADHESIVES
Loctite® 3105™
Light Cure Adhesive
A high strength, low viscosity,UV/visible light cure adhesive.Primarily designed for bondingrigid and flexible PVC topolycarbonate. Enables easyassembly of components withclose-fitting tolerances.Recommended for applicationsinvolving small gaps less than 0.25 mm.
Loctite® 3106™
Light Cure Adhesive
A high strength, medium viscosity,thixotropic, UV/visible light cureadhesive. Designed primarily forbonding rigid and flexible PVC topolycarbonate where large gapfilling capabilities and a flexiblejoint are desired.
Loctite® 3107™
Light Cure Adhesive
A low viscosity, UV/visible light cureadhesive for difficult-to-bondplastics including plasticized PVC. Very rapid cure. Flexible and fluorescent.
Loctite® 3108™
Light Cure Adhesive
A low durometer, rubbery, UV cureadhesive for potting and sealing ofplastic, glass, and metal. Veryflexible and resilient.
Loctite® 3175™
Light Cure Adhesive
A solvent-free adhesive designedfor applications where a rapid cureand a dry-to-the-touch surface arerequired. Excellent for tacking andcoating. Good adhesion to plastics.
BO
ND
ING
• LIGH
T C
UR
E A
DH
ES
IVE
SA
SS
EM
BLY
PR
OD
UC
TS
29
Loctite® 3491™
Light Cure Adhesive
A fast curing, medium viscosityadhesive designed for bondingglass-to-glass and to a variety ofother surfaces.
Loctite® 3492™
Light Cure Adhesive
A fast curing, low viscosityadhesive designed for bondingglass-to-glass and to a variety ofother surfaces.
Loctite® 3494™
Light Cure Acrylic
A durable, visible/UV cure, mediumviscosity adhesive designed forglass and metal bonding.
Loctite® 3525™
Light Cure Adhesive
A visible/UV cure, high viscosityadhesive. Fast cure, colorlessbonds. Excellent flexibility,toughness, and durability tomoisture exposure. Fluorescent.Used to bond glass, metal, and plastics.
Loctite® 3526™
Light Cure Acrylic
A visible/UV/heat cure version of3525™. All the properties of 3525™
plus low temperature rapid heatcure capabilities (250°F). Fast cure even under low energysources. Fluorescent.
CYANOACRYLATEADHESIVES
Loctite® 4306™/4307™
Flashcure®
Light Cure Adhesive
InstantNew patented technology. One-component, low or high viscosityfluorescent adhesives. Specificallyformulated for extremely rapid UVor visible light cure and secondarycyanoacrylate cure mechanism.Eliminates the need for solvent-based accelerators.
EPOXY ADHESIVES
Loctite® 3335™
Light Cure Adhesive
UV Cationic EpoxyA one-part, medium viscosity,cationic epoxy. Excellent forsurface cure – no oxygeninhibition. Low outgassing, verygood high temperature resistance.Rigid, low shrinkage.
Loctite® 3336™
Light Cure Adhesive
A UV cure, medium viscosity, two-part epoxy. UV cure effectsfast gelation. Complete cure atroom temperature or heat cure.Tough and durable. Designed for potting, bonding, and sealing.
Loctite® 3337™
Light Cure Adhesive
UV Cationic EpoxyA one-part, flexible, mediumviscosity cationic epoxy. Excellentfor surface cure with low shrinkageand low outgassing. Use forbonding, coating, tackingapplications on metal, plastic, orglass substrates.
Loctite® 3340™
Light Cure Adhesive
UV Cationic EpoxyA one-part, rigid, medium viscositycationic epoxy. Exhibits goodthermal, water, and chemicalresistance with metal, plastic andglass substrates.
SILICONE ADHESIVES
Loctite® 5031™ Nuva-Sil®
Silicone Potting Compound
High Adhesion/Visible LightA UV or visible light curing siliconefor high speed potting, coating, andsealing applications. High adhesionfor difficult-to-bond substrates.
NEW
NEW
BO
ND
ING
•
LIG
HT
CU
RE
AD
HE
SIV
ES
AS
SE
MB
LY P
RO
DU
CT
S
30
349™ Impruv®
352™
363™ Impruv®
366™
3100™
3101™
3102™
3103™
3104™
3105™
3106™
3107™
3108™
3175™
3491™
3492™
3493™
3494™
3525™
3526™
3751™ LiteTak®
3761™LiteTak®
3493134990
3524135286
3633136390
3663112224
19862
19861
23690
2369123692
2369423693
2369523696
2369723698
2841928466
2840028465
2950529506
2836617944
2836718666
2836818751
3076529487
3022030221
3075630764
2136221363
2135921360
50 ml bottle1 liter bottle
50 ml bottle1 liter bottle
50 ml bottle1 liter bottle
50 ml bottle1 liter bottle
25 ml syringe
25 ml syringe
1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
6 ml tube1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
Clear/straw
Clear/light amber
Clear/pale straw
Clear/light amber
Slightly hazy/straw
Slightly hazy/straw
Clear/pale straw
Clear/pale straw
Clear/pale straw
Clear/pale straw
Clear/pale straw
Clear/straw/
fluorescent
Translucent/colorless
Clear/ straw
Clear/pale straw
Clear/pale straw
Clear/pale straw
Clear/pale straw
Clear/pale straw/fluorescent
Clear/pale straw/fluorescent
Clear/colorless
Clear/ straw
Ultraviolet
Ultraviolet,heat, activator
Ultraviolet
Ultraviolet,heat, activator
Ultraviolet,visible
Ultraviolet,visible, heat,
activator
Ultraviolet,visible
Ultraviolet,visible
Ultraviolet,visible
Ultraviolet,visible
Ultraviolet,visible
Ultraviolet,visible
Ultraviolet
Ultraviolet
Ultraviolet
Ultraviolet
Ultraviolet
Ultraviolet,visible
Ultraviolet,visible
Ultraviolet,visible, heat
Ultraviolet
Ultraviolet
Glass, metal
Glass, metal
Metal, thermoset plastic
Glass, metal
Glass, metal,thermoset plastic
Glass, metal,thermoset plastic
Polycarbonate, thermoplastic
Polycarbonate, thermoplastic
Polycarbonate, thermoplastic, polyvinylchloride
Polycarbonate, thermoplastic, polyvinylchloride
Polycarbonate, thermoplastic, polyvinylchloride
Plasticized PVC,thermoplastic
Thermoplastic, thermoset plastic
Various
Glass, metal
Glass, metal
Glass, metal
Glass, metal
Glass, metal,thermoset plastic
Glass, metal,thermoset plastic
Various
Various
9,500
19,500
250
7,500
6,000
6,000
3,750
10,000Thixotropic
160
300
5,000
500
5,100
4,000
1,100
500
5,500
5,500
15,000
17,800
10,000
2,500
LOCTITE® BRAND LIGHT CURE ACRYLIC ADHESIVESPROPERTIES CHART
Appe
aran
ceC
lari
ty/C
olor
Cur
e Ty
pe
Visc
osity
, cP
Bro
okfie
ld, 2
5°C
300
290
88
240
210
220
265
260
50
265
250
220
330
14
27
5
260
190
260
185
50
57
Elon
gatio
nat
Bre
ak, %
D 70
D 60
D 50
D 45
D 66
D 66
D 59
D 51
D 69
D 64
D 53
D 27
A 72
D 70
D 75
D 79
D 75
D 65
D 60
D 62
D 73
D 69
Shor
e H
ardn
ess
Tem
pera
ture
Ran
ge
Key
Sub
stra
tes
ItemNumber ContainerP R O D U C T
-65°F to266°F
-65°F to275°F
-65°F to356°F
-65°F to230°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to275°F
-65°F to275°F
Indicates worldwide availability.
BO
ND
ING
• LIGH
T C
UR
E A
DH
ES
IVE
SA
SS
EM
BLY
PR
OD
UC
TS
31
4304™Flashcure®
4305™Flashcure®
4306™Flashcure®
4307™Flashcure®
3225432407
3226832409
3743937442
3744137443
1 oz. bottle1 lb. bottle
1 oz. bottle1 lb. bottle
1 oz. bottle1 lb. bottle
1 oz. bottle1 lb. bottle
Clear/pale green
Clear/pale green
Clear/pale green/fluorescent
Clear/pale green/fluorescent
Ultraviolet,visible, moisture
Ultraviolet,visible, moisture
Ultraviolet,visible, moisture
Ultraviolet,visible, moisture
Elastomer, metal,polycarbonate, thermoplastic
Elastomer, metal,polycarbonate, thermoplastic
Elastomer, metal,polycarbonate, thermoplastic
Elastomer, metal,polycarbonate, thermoplastic
20
900
20
900
LOCTITE® BRAND LIGHT CURE ADHESIVES (CYANOACRYLATE)PROPERTIES CHART
Appe
aran
ceC
lari
ty/C
olor
Cur
e Ty
pe
Visc
osity
, cP
Broo
kfie
ld, 2
5°C
9
6
9
6
Elon
gatio
nat
Bre
ak, %
D 72
D 77
D 72
D 77
Shor
e H
ardn
ess
Tem
pera
ture
Rang
e
Key
Sub
stra
tes
ItemNumber ContainerP R O D U C T
-65°F to180°F
-65°F to180°F
-65°F to180°F
-65°F to180°F
3335™
3336™
3337™
3340™
3028830289
3106431065
3605736058*
3690636907*
25 ml syringe1 liter bottle
42 ml dual cartridge400 ml dual cartridge
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
Clear/colorless
Clear/light amber
Clear
Transparent
Ultraviolet,cationic
Ultraviolet, room temperature, heat
Ultraviolet,cationic
Ultraviolet,cationic
Metal, glass,thermoplastic
Metal,thermoplastic
Metal, glass
Metal, glass
6,000
14,500
5,000
6,000
LOCTITE® BRAND LIGHT CURE ADHESIVES (EPOXY)PROPERTIES CHART
Appe
aran
ceC
lari
ty/C
olor
Cur
e Ty
pe
Visc
osity
, cP
Broo
kfie
ld, 2
5°C
2
6
7
5
Elon
gatio
nat
Bre
ak, %
D 84
D 79
D 80
D 83
Shor
e H
ardn
ess
Tem
pera
ture
Rang
e
Key
Sub
stra
tes
ItemNumber ContainerP R O D U C T
-65°F to325°F
-65°F to350°F
-65°F to350°F
-65°F to350°F
5031™Nuva-Sil®
5033™Nuva-Sil®
5083™Nuva-Sil®
5091™Nuva-Sil®
4008640087
4008840089
1752817635
1741218074
300 ml cartridge40 lb. pail
300 ml cartridge40 lb. pail
300 ml cartridge40 lb. pail
300 ml cartridge40 lb. pail
Translucent
Translucent/colorless/
fluorescent
Translucent/colorless
Translucent/colorless
Visible/ultraviolet,moisture,acetoxy
Visible/ultraviolet,moisture,acetoxy
Ultraviolet,moisture,acetoxy
Ultraviolet,moisture,acetoxy
Glass, metal, ceramic
Glass, metal, ceramic
Glass, metal, ceramic
Glass, metal, ceramic
5,500
145gm/min.†
145gm/min.†
5,500
LOCTITE® BRAND LIGHT CUREADHESIVES (SILICONE) PROPERTIES CHART
Appe
aran
ceC
lari
ty/C
olor
Cur
e Ty
pe
Visc
osity
, cP
Broo
kfie
ld, 2
5°C
100
170
170
100
Elon
gatio
nat
Bre
ak, %
A 34
A 55
A 55
A 34
Shor
e H
ardn
ess
Tem
pera
ture
Rang
e
Key
Sub
stra
tes
ItemNumber ContainerP R O D U C T
-65°F to350°F
-65°F to350°F
-65°F to350°F
-65°F to350°F
Agen
cyAp
prov
als
–
–
UL Classifiedfor U.S.
UL Classifiedfor U.S.
† Extrusion rate, grams/minute, 1/8" orifice at 90 psi.
* Made-to-order item.
Indicates worldwide availability.
UV VisibleLight
UV VisibleLight
VUV UVC UVB UVA Blue Green Yellow Red
100 200 300 400 500 600 700nm
Gamma Rays
10-2 10-1 101 103 104 105 nm
Wavelength
104 100 1 1/100 10-5 eVRadiationEnergy
Infra-Red Microwaves Radiowaves
The Electromagnetic Spectrum
NEW
NEW
NEW
NEW
4
2
SEAL & LOCK WITH LOCTITE
1
3
GA
SK
ET
ING
AS
SE
MB
LY P
RO
DU
CT
S
32
GASKETING Gaskets are used to prevent fluid or gas leaks byforming impervious barriers. For successful gasketing,the seal must remain intact and leak-free over aprolonged period of time. Therefore, the gasket mustresist the fluid and/or gaseous medium being sealedor excluded, and withstand the operating temperaturesand pressures to which it is subjected.
There are three types of flange gaskets.
1. Conventional pre-cut compression gaskets aremade from paper, rubber, cork, metal or other materials.
2. Formed-in-Place (FIP) gaskets are applied as aliquid sealant to one of the flange surfaces beforethe parts are assembled. After assembly, the FIPgasket spreads and cures between the flangesfilling gaps, scratches, and surface irregularitiesto provide a durable seal.
3. Cured-in-Place (CIP) gaskets, which are applied as a liquid by tracing machines in precise beads toone of the flanges and cured by ultraviolet (UV)light, form an elastomeric material with adhesionto the flange surface. Sealing is achieved throughcompression of the cured gasket during flange assembly.
What is the Best Gasket for My Application?
Many factors influence gasket choice to achieve therequired sealing performance on a wide range offlanges. The following chart will work best whenselecting the right gasket type. This chart is intended to serve as a general guideline to help you determinewhich gasket type is best suited for your application.The data presented herein reflects typical propertiesfor each gasket type; however, there may be exceptionsto the data presented. Individual product informationcan then be found on the following pages to helpnarrow your search.
This chart should not be used to specify gasket materials without specific testing. It is recommended that you conduct on-part testing toensure adhesive performance before specifying any Loctite® brand gasketing product.
Henkel Adhesives and Sealants Specialists are available to assist you withnew flange designs, or to help you re-engineer an existing application usingLoctite® brand products for improved performance and cost savings. Theycan also set up testing of your parts at the Henkel Customer EngineeringCenter. For application assistance, call 1-800-LOCTITE (562-8483) or visitwww.loctite.com and select “Contact Loctite.”
GA
SK
ET
ING
AS
SE
MB
LY P
RO
DU
CT
S
33
Benefits
Limitations
Improve Structural StrengthLong Open Time
High Pressure Seals
Gap Fill
Form-in-Place Anaerobic Form-in-Place Silicone Cure-in-Place Silicone
High Gap FillingResistant to Dynamic Fatigue
On-line Pressure Testing
Short Open Time
G E N E R A L C O M PA R I S O N
G A S K E T T Y P E
1 Uncured liquid adhesives may cause stress cracking of certain thermoplastics, e.g. polycarbonate, acrylic, and polysulfone. Special products and process techniques are available. Consult the Loctite® Design Guide to Bonding Plastics (LT-2197) or contact 1-800-LOCTITE for more information.
Number of Components
Cure Method
Cure Temperature
Cure Speed Initial Cure Full Cure
Processing Options Manual Automated
For more information on each Adhesive Category,refer to the following pages...
1
RTV
Room Temperature
15 - 30 minutes24 hours - 7 days
YesYes
36 - 37
1
Anaerobic
Room Temperature
15 - 30 minutes24 - 72 hours
YesYes
34 - 35
Temperature Resistance Continuous Operation Maximum
Fluid Resistance Oil Water/Glycol Fuel Transmission Fluid
Gap Fill Ideal Maximum
Instant Seal
Flange Type
Suitable for Use With Metals Plastics1
-60°F to +400°F+500°F
YesYesNoYes
0.001" - 0.125"0.240"
Low Pressure
Rigid or Flexible
YesYes
-40°F to +300°F+400°F
YesYes
LimitedYes
0.001" - 0.005"0.050"
Low Pressure
Rigid
YesNo
P R O C E S S C O N S I D E R AT I O N S
P E R F O R M A N C E C O N S I D E R AT I O N S
High Gap FillingReusable/Servicable Gasket
Immediate Full Properties
Requires Process Equipment
-60°F to +400°F+500°F
YesYesNoYes
0.020" - 0.125"0.240"
High Pressure
Rigid or Flexible
YesYes
1
UV/RTV
Room Temperature
15 - 30 seconds30 seconds
NoYes
36 - 37
GA
SK
ET
ING
•
AN
AE
RO
BIC
AS
SE
MB
LY P
RO
DU
CT
S
34
Anaerobic gasketing technology hasrevolutionized the sealing of flanges in theautomotive industry, in the assembly of heavyequipment, and in the manufacture of varioustypes of fluid power equipment.
Loctite® brand anaerobic gasketing materialsremain liquid when exposed to air, but cure whenconfined between mating flanges. Anaerobicgasketing products are best suited for small gapapplications and rigid metal-to-metal assemblies.
GASKETINGANAEROBIC
Loctite® 518™ GasketEliminator® Flange Sealant
Forms a flexible, solvent-resistantseal that will not tear or decay.Seals to 300°F and fills gaps to0.050". Can be used on flexiblemetal assemblies, includingaluminum surfaces. Easydisassembly and cleaning.
Loctite® 510™ GasketEliminator® Flange Sealant
High TemperatureProduct has a temperature range to400°F with excellent solvent andchemical resistance. Makes ordresses gaskets in rigid assemblies.Eliminates gasket compression set.
Loctite® 515™ GasketEliminator® Flange Sealant
Makes flexible gaskets for rigidmachined flanges with less than.050" gap. Flexes with flanges thatmove in service.
Loctite® 504™ GasketEliminator® Flange Sealant
Gap FillingA single-component, instant, low pressure seal that fills gaps to 0.050".
Loctite® 509™ GasketEliminator® Flange Sealant
FlexibleProduct withstands minor flangemovements caused by vibrations. Itwill not run when applied to verticalsurfaces. Fluorescent blueproperties allow easy visualinspection during assembly.
New semi-solid anaerobic
gasketing QuickStix™ are
available! See pages 84,
86 & 87 for more details.
GA
SK
ET
ING
• AN
AE
RO
BIC
AS
SE
MB
LY P
RO
DU
CT
S
35
504™Gasket Eliminator®
509™Gasket Eliminator®
510™Gasket Eliminator®
515™Gasket Eliminator®
518™Gasket Eliminator®
549™
568™
573™
574™
5127™
5182™
5044150480
2152550965
510315104151074
515175153151580
2242322424518175183151845
54941
56841
26392
2401826338
17430
18010
250 ml tube300 ml cartdg.
300 ml cartdg.850 ml cartdg.
50 ml tube250 ml tube300 ml cartdg.
6 ml tube50 ml tube300 ml cartdg.
KitKit6 ml tube50 ml tube300 ml cartdg.
250 ml tube
250 ml tube
250 ml tube
50 ml tube250 ml tube
300 ml cartdg.
850 ml cartridge
Gap filling
Very flexible
High temp.applicationsExcellent solventresistance
For flexibleapplications
For all metalsincludingaluminumflanges
Instant sealplastic gasket
Plastic gasket
Slow curingfor extendedassembly operations
Fast curing,large gaps
For flexibleapplications,high elongation
Roboticapplication on flanges, seals, covers
Unprimed - .030"Primed - .050"
Unprimed - .010"Primed - .020"
Unprimed - .010"Primed - .020"
Unprimed - .010"Primed - .050"
Unprimed - .010"Primed - .050"
Unprimed - .020"Primed - .050"
Unprimed - .015"Primed - .050"
Unprimed - .010"Primed - .020"
Unprimed - .010"Primed - .020"
Unprimed - .010"Primed - .010"
Unprimed - .010"Primed - .020"
Orange
Blue
Red
Purple
Red
Orange
Orange
Green
Orange
Blue
Red
Rigid
Flexible
Rigid
Flexible
Flexible
Rigid
Rigid
Semi-rigid
Semi-rigid
Flexible
Flexible
500,000/1,200,000Thixotropic
65,000/200,000
Thixotropic
188,000/500,000
Thixotropic
275,000/950,000
Thixotropic
800,000/3,750,000Thixotropic
22,500
6,500
19,000/60,000
Thixotropic
30,000/100,000
Thixotropic
100,000/500,000
Thixotropic
140,000/580,000
Thixotropic
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
400°F
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
300°F
NF™
N™
N™
N™
N™
N™or
T™
N™or
T™
N™
N™
N™
N™
–
–
UL Classified for U.S.
UL Classifiedfor U.S.
NSF/ANSI 61,CFIA
–
–
–
–
–
–
LOCTITE® BRAND GASKETINGPRODUCTS PROPERTIES CHART
Typi
cal U
se
Col
or
Gap
Fill
Cur
ed S
tate
Visc
osity
, cP
Unprimed - 4 to 24 hrs.Primed - 30 min. to 4 hrs.
Unprimed - 6 to 48 hrs.Primed - 1 to 6 hrs.
Unprimed - 4 to 24 hrs.Primed - 30 min. to 4 hrs.
Unprimed - 1 to 12 hrs.Primed - 15 min. to 2 hrs.
Unprimed - 4 to 24 hrs.Primed - 30 min. to 4 hrs.
Unprimed - 6 to 24 hrs.Primed - 2 hrs. to 24 hrs.
Unprimed - 12 to 24 hrs.Primed - 2 hrs. to 24 hrs.
Unprimed - 6 to 48 hrs.Primed - 1 to 6 hrs.
Unprimed - 1 to 12 hrs.Primed - 15 min. to 2 hrs.
Unprimed - 4 to 24 hrs.Primed - 1 to 24 hrs.
Unprimed - 4 to 24 hrs.Primed - 30 min. to 24 hrs.
Cur
e Sp
eed
Reco
mm
ende
d Pr
imer
1.08
1.12
1.16
1.10
1.13
1.25
1.12
1.25
1.11
1.10
1.10
Spec
ific
Gra
vity
Agen
cyAp
prov
als
Tem
pera
ture
Rang
e
ItemNumber ContainerP R O D U C T
Indicates worldwide availability.
GA
SK
ET
ING
•
SIL
ICO
NE
AS
SE
MB
LY P
RO
DU
CT
S
36
Loctite® brand silicone gasketing materialsinclude unique products with excellent fluidresistance, formulations for high operatingtemperatures, and UV-curing formulations forcure-in-place production requirements. Siliconegasketing products are best suited for large gapapplications and stamped metal assemblieswhere flange flexing occurs.
GASKETINGSILICONE
Loctite® 5910®
Flange Sealant
RTV SiliconeSuperior flexibility and adhesion.Excellent fluid resistance. Mediumbody is easy to dispense. Non-corrosive, low odor, low volatility.Black in color.
Loctite® 5920™
Flange Sealant
Copper High Performance RTV Silicone Gasket MakerHigh performance for rigid flangeassemblies. Low volatility. Copperin color.
Loctite® 5999™
Flange Sealant
Heavy Body/Grey High PerformanceRTV Silicone Gasket MakerFor rigid flange assemblies.Provides instant seal. Excellentfluid resistance. Non-corrosive, lowodor, low volatility. Grey in color.
CURE-IN-PLACE
Loctite® 5950™/5951™
Fastgasket®
Flange Sealant
Designed for automated assembly.Rapid 30 second UV cure permitsin-line processing. Secondarymoisture cure insures full cure even in shadowed areas. Black/clearin color.
Loctite® 5960™ Fastgasket®
Flange Sealant
Designed for automated assembly.Rapid 30 second UV cure permitsin-line processing. Fluid resistant.Clear in color.
FORM-IN-PLACE
Loctite® 5699™
Flange Sealant
Grey High Performance RTV Silicone Gasket MakerFor rigid flange assemblies.Excellent fluid resistance. Easy todispense, non-corrosive, low odor,low volatility. Grey in color.
Loctite® 5900®
Flange Sealant
Heavy Body RTV SiliconeSuperior flexibility and adhesion.Provides instant seal. Excellentfluid resistance. Non-corrosive, lowodor, low volatility. Black in color.
Loctite® 5905™
Flange Sealant
RTV SiliconeSuperior flexibility and adhesion,fast depth of cure. Offers excellentfluid resistance.
NEW
GA
SK
ET
ING
• SILIC
ON
EA
SS
EM
BLY
PR
OD
UC
TS
37
5699™
5900®
5905™
5910®
5920™
5999™
18718185811858218583
201662016720168
3853536923
217462174721748
305428204621472
217442829820170
70 ml tube300 ml cartridge50 lb. pail550 lb. drum
300 ml cartridge50 lb. pail550 lb. drum
300 ml cartridge50 lb. pail
300 ml cartridge50 lb. pail550 lb. drum
70 ml tube300 ml cartridge40 lb. pail
300 ml cartridge50 lb. pail550 lb. drum
Oil/waterresistant
High adhesion,instant seal
High adhesion,fast depth ofcure
High adhesion
High temperature
Oil/waterresistant,instant seal
.250"
.250"
.240"
.240"
.240"
.240"
Grey
Black
Black
Black
Copper
Grey
250
35
350
600
>300
105
Moisture
Moisture
Moisture
Moisture
Moisture
Moisture
-75°Fto
625°F
-65°Fto
500°F
-65°Fto
500°F
-65°Fto
500°F
-65°Fto
700°F
-75°Fto
625°F
LOCTITE® BRAND FORM-IN-PLACE SILICONE FLANGE SEALANTS PROPERTIES CHART
Typi
cal U
se
Col
or
Gap
Fill
Extr
usio
n Ra
te,
gm/m
in.
Cur
e Sp
eed*
Tack free - 30 min.Full cure - 24 hrs.
Tack free - 20 min.Full cure - 24 hrs.
Tack free - 20 min.Full cure - 24 hrs.
Tack free - 20 min.Full cure - 24 hrs.
Tack free - 60 min.Full cure - 24 hrs.
Tack free - 10 min.Full cure - 24 hrs.
Cur
e M
etho
d
Dur
omet
er**
1.45
1.34
1.30
1.34
1.05
1.45
55
35
39
30
31
60
% E
long
atio
n
Tens
ile
Stre
ngth
, psi†
160
550
345
550
355
175
Spec
ific
Gra
vity
Tem
pera
ture
Rang
e (in
term
ittan
t)
ItemNumber ContainerP R O D U C T
435
200
270
200
275
500
Agen
cyAp
prov
als
–
CFIA,NSF P1
–
–
–
–
* Varies with substrates. ** Shore A. †Grit blasted steel. Indicates worldwide availability.
5950™Fastgasket®
5951™Fastgasket®
5960™Fastgasket®
2928718495
18198
3113224707
300 ml cartridge40 lb. pail
40 lb. pail
300 ml cartridge40 lb. pail
Black
Clear
Clear
350
350
350
UV/moisture
UV/moisture
UV
LOCTITE® BRAND FASTGASKET®
CURE-IN-PLACE SILICONE FLANGE SEALANTS PROPERTIES CHART
Col
or
Extr
usio
n Ra
te,
gm/m
in.
Cur
e Sp
eed*
30 seconds@ 120 mW/cm2
30 seconds@ 120 mW/cm2
30 seconds@ 120 mW/cm2
Agen
cyAp
prov
als
UL Classifiedfor U.S.
–
–
Cur
e M
etho
d
Har
dnes
s
30
30
50
% E
long
atio
n
Tens
ile
Stre
ngth
, psi
200
200
260
ItemNumber ContainerP R O D U C T
150
150
600
* Varies with substrates. Indicates worldwide availability.
5963™Procure®
5964™Procure®
34337
3434734348
50 lb. pail
50 lb. pail300 ml cartridge
Grey
Brown
250
120
Heat
Heat/microwave
LOCTITE® BRAND PROCURE® CURE-IN-PLACE GASKETS PROPERTIES CHART
Col
or
Extr
usio
n Ra
te,
gm/m
in.
Cur
e Sp
eed*
Cur
e M
etho
d
Har
dnes
s
50
32
% E
long
atio
n
Tens
ile
Stre
ngth
, psi
360
530
ItemNumber ContainerP R O D U C T
620
635
* Varies with substrates.
10 minutes @150°C
10 minutes@150°C/VFM 2-4 minutes
Loctite® 5963™ Procure®
Cure-In-Place Gasket
Heat Cure CompressionSuperior compression setresistance. One-component,exceptional fluid resistance, andheat resistance to 150°C. Great for powertrain applications. Grey in color.
Loctite® 5964™ Procure®
Cure-In-Place Gasket
Heat Cure CompressionSoft, with greater elongation. Cureswith either convection heat ormicrowave. One-component, goodcompression set for powertrainapplications. Brown in color.
For the name and number of your nearest distributor, call:1-800-LOCTITE (562-8483)
Or visit us on the web at:www.loctite.com
NEW
PO
TT
ING
& E
NC
AP
SU
LAT
ING
AS
SE
MB
LY P
RO
DU
CT
S
38
POTTING & ENCAPSULATINGPotting and Encapsulating Compounds are used to provide mechanical reinforcement to housedassemblies, to fill large voids, and to protectcomponents from the effects of exposure tochemicals, moisture, mechanical shock, andvibration. Sealing components with potting andencapsulating compounds prevents corrosion andensures long-term integrity of the device. Variablesto consider when selecting a potting orencapsulating material include:
• Viscosity of uncured compound• Dispensing requirements• Device operating temperature• Desired chemical resistance• Desired thermal conductivity• Desired flame retardance• Hardness of cured product• Overall cost
There are a variety of potting and encapsulatingcompounds to choose from – epoxy, hot melt,silicone, and urethane. The thermal properties ofepoxy and silicone systems make them ideally suitedfor applications exposed to temperatures above125°C. If a soft, flexible material is needed,particularly at low temperatures, then a urethane, asilicone or a hot melt material may be used.
What is the Best Product for My Application?
The following chart will work best when selecting apotting or encapsulating compound. This chart isintended to serve as a general guideline to help youdetermine which categories are best suited for yourapplication. The data presented represents typicalproperties for each product category; however,individual product properties may differ. It issuggested that, based on the information provided,you consider at least the two best productcategories that meet your application criteria.Individual product information can then be found onthe pages that follow to help you narrow your search.
This chart should not be used to specify products without specific testing.It is recommended that you conduct on-part testing to ensure productperformance before specifying any adhesive.
Henkel Adhesives and Sealants Specialists are available to assist you withnew product designs, or to help you re-engineer an existing applicationusing Loctite® brand products for improved performance and cost savings.They can also set up testing of your parts at the Henkel CustomerEngineering Center. For application assistance, call 1-800-LOCTITE (562-8483) or visit www.loctite.com and select “Contact Loctite.”
PO
TT
ING
& E
NC
AP
SU
LAT
ING
AS
SE
MB
LY P
RO
DU
CT
S
39
Benefits
Limitations
Temperature Resistance
Environmental Resistance Polar Solvents1
Non-Polar Solvents2
Hardness
Flexibility
Tg
Excellent toughness/
flexibility
Liquid adhesivesensitive to moisture
-65°C to +125°C
GoodGood
Soft
High
Low
Fast, large gap filling
Low heat resistance
-65°C to +125°C
Good (Polyolefins, Polyamides)Good (Polyamides)
Semi-Soft
High
Low
Wide range offormulations
Mixing required
-65°C to +180°C
Very GoodExcellent
Rigid
Low
High
Epoxies
Excellent temperature
resistance
Low strength
-65°C to +200°C
GoodPoor
Soft
Very High
Very Low
Hot Melts SiliconesUrethanesP E R F O R M A N C E C O N S I D E R AT I O N S
P O T T I N G & E N C A P S U L AT I N G C O M P O U N D S
1 Examples of Polar Solvents: Water, Ethylene Glycol, IPA, Acetone.2 Examples of Non-Polar Solvents: Motor Oil, Gasoline, Toluene, n-Heptane, ATF.
Number of Components
Cure Temperature
Gel Time Average Fastest
Full Cure Time
Depth of Cure
Dispensing/Curing Equipment Required?
Light Cure Versions Available?
For more information on each Category, refer to the following pages...
1
Room Temperature(applied at elevated temperature)
60 seconds10 - 20 seconds
1 hour (or when cooled)
Unlimited
Yes
No
44
2
RoomTemperature
1 - 3 hours15 minutes
24 hours
Unlimited
Yes
No
40, 41, 44
2
RoomTemperature
1 - 3 hours15 minutes
24 hours
Unlimited
Yes
Yes
40, 42-44
1
UV/RoomTemperature
30 seconds5 seconds
24 hours
Shallow (<0.375")
Yes
Yes
45
P R O C E S S C O N S I D E R AT I O N S
PO
TTIN
G &
EN
CA
PS
ULA
TIN
G •
EP
OX
IES
, PO
LYU
RE
THA
NE
S, H
OT
ME
LTS
& S
ILIC
ON
ES
AS
SE
MB
LY P
RO
DU
CT
S
40
There are a variety of Loctite® brand pottingand encapsulating compounds to choose from –epoxy, hot melt, polyurethane, and silicone.
Loctite® brand potting and encapsulatingcompounds are designed to protect electricalcomponents from the effects of exposure tochemicals, moisture, thermal shock, mechanicalshock, and vibration. Sealing components withLoctite® brand potting and encapsulatingcompounds prevents corrosion and ensureslong-term integrity of electrical devices.
EPOXY & POLYURETHANECOMPOUNDS
Loctite® brand Hysol® Potting andEncapsulating Compounds are two-part epoxy and polyurethanesystems formulated to offer a wide range of performancecharacteristics matched to specificapplication requirements. Any resincan be combined with any hardener within the same colorregion to create a mixed system.
POTTING &ENCAPSULATINGEPOXIES, POLYURETHANES, HOT MELTS & SILICONES
Epoxy Key Epoxy KeyResin Features Hardener Features
3140™ General Purpose 3162™ Fast Cure3141™ High Temperature 3163™ Excellent Adhesion3142™ Thermally Conductive 3164™ General Purpose3144™ Flame Retardant 3165™ Low Shrinkage
Polyurethane Key Polyurethane KeyResin Features Hardener Features
3173™ General Purpose 3182™ Fast Cure3183™ General Purpose3184™ Flame Retardant
PO
TTING
& E
NC
AP
SU
LATING
• EP
OX
IES
, PO
LYU
RE
THA
NE
S, H
OT M
ELTS
& S
ILICO
NE
SA
SS
EM
BLY
PR
OD
UC
TS
41
Polyurethane SystemsSystem Characteristics 3173™/3182™ 3173™/3183™ 3173™/3184™
Typical Uncured PropertiesViscosity, cP
Resin 75 75 75Hardener 30,000 800 14,000
Mixed 5,500 450 2,250
Working Time73°F (23°C) <7 min. 20-40 min. 45 min.
at 300 g at 105 g at 300 g
Gel Time73°F (23°C) 14 min. 40-70 min. 150 min.
at 300 g at 105 g at 300 g
Cure CycleNormal 73°F (23°C) 90 min. 24 hrs. 24 hrs.
Alternate185°F (85°C) 30 min. 1-3 hrs. 1-3 hrs.
Mix RatioBy Weight, Resin to Hardener 13:87 30:70 15:85By Volume, Resin to Hardener 1: 5.2 1:3 1:4.8
ColorResin dk. brown clear brown clear brown
Hardener black opaque black opaque whiteMixed black opaque black opaque white
Specific GravityResin 1.23 1.23 1.23
Hardener 1.60 0.96 1.45Mixed 1.55 1.06 1.40
Typical Cured PropertiesHardness, Shore A 75 70 80
Hardness, Shore OO – – –
Tg, °C -10 -16 -15CTE above Tg, m/mm°C 128x10e-6 190x10e-6 151x10e-6
Typical Electrical PropertiesDielectric Constant
0.1 kHz 4.68 5.92 4.511.0 kHz 4.02 4.36 4.29
10.0 kHz 3.76 3.65 3.94100.0 kHz 3.63 3.31 3.56
Dissipation Factor0.1 kHz 0.13 0.22 0.021.0 kHz 0.07 0.17 0.04
10.0 kHz 0.04 0.10 0.06100.0 kHz 0.02 0.05 0.07
Insulation Resistance, ohms 2.5x10e+13 1.1x10e+11 1.1x10e+12Volume Resistivity, ohms/cm 1.5x10e+15 6.83x10e+12 6.61x10e+13Dielectric Strength, Volts/mil 370 375 370
Flammability Rating – – 94V-Øat3/8"UL File No. E106917 94V-2at1/4"
Refer to page 44 for Hysol® package sizes and ordering information.
PO
TTIN
G &
EN
CA
PS
ULA
TIN
G •
EP
OX
IES
, PO
LYU
RE
THA
NE
S, H
OT
ME
LTS
& S
ILIC
ON
ES
AS
SE
MB
LY P
RO
DU
CT
S
42
Epoxy System 3140™ Epoxy System 3141™
System Characteristics 3140™/3162™ 3140™/3163™ 3140™/3164™ 3140™/3165™ 3141™/3162™ 3141™/3163™ 3141™/3164™ 3141™/3165™
Typical Uncured PropertiesViscosity,cP
Resin 11,000 11,000 11,000 11,000 80,000 80,000 80,000 80,000Hardener 120 450 105 55 120 450 105 55
Mixed 2,000 1,500 1,500 2,000 5,000 4,000 6,000 13,000
Working Time77°F(25°C) 5-10 min. 80-100 min. 10-15 min. 60-90 min. 5 min. 30-45 min. 10 min. 35-40 min.
at 100 g at 200 g at 400 g at 400 g at 200 g at 200 g at 400 g at 200 g
Gel Time77°F(25°C) 10-15 min. 2.5-3 hrs. 25-35 min. 2-3 hrs. 10-15 min. 60-80 min. 20-25 min. 65-75 min.
at 100 g at 200 g at 400 g at 400 g at 200 g at 200 g at 200 g at 200 g
Cure CycleNormal 77°F(25°C) 16 hrs. 24 hrs. 16 hrs.
24 hrs./77°F24 hrs. 24 hrs. 24 hrs.
24 hrs./77°F+4 hrs./200°F +4 hrs./200°F
Alternate 150°F(66°C) 1 hrs. 2 hrs. 2 hrs. NA 2 hrs. 2 hrs. 2 hrs. NA
Mix RatioBy Weight 100:18.1 100:29 100:29.5 100:9 100:19.8 100:30 100:31.5 100:9By Volume 3.6:1 2:1 2:1 6.5:1 3:1 2:1 2:1 6.5:1
ColorResin black black black black black black black black
Hardener clear clear clear clear clear amber amber clearMixed black black black black black black black black
Specific GravityResin 1.64 1.64 1.64 1.64 1.61 1.61 1.61 1.61
Hardener 0.99 0.96 0.97 0.96 0.99 0.96 0.97 0.96Mixed 1.48 1.41 1.42 1.55 1.46 1.40 1.40 1.40
Typical Cured PropertiesHardness, Shore D 80 80 70 85 90 80 85 85
Tg, °C 35 20 27 67 75 38 31 104CTE above Tg, mm/mm°C 125x10e-6 133x10e-6 150x10e-6 119x10e-6 135x10e-6 138x10e-6 111x10e-6 115x10e-5CTE below Tg, mm/mm°C 37.5x10e-6 44.9x10e-6 82.6x10e-6 36.0x10e-6 39.7x10e-6 52.6x10e-6 49.2x10e-6 35x10e-6
Typical Electrical PropertiesDielectric Constant
0.1 kHz 4.25 4.61 4.2 4.87 3.91 3.58 4.11 4.281.0 kHz 4.20 4.37 4 4.83 3.88 3.52 3.97 4.18
10.0 kHz 4.16 4.20 3.8 4.75 3.84 3.46 3.87 4.06100.0 kHz 4.10 4.05 3.7 4.64 3.79 3.39 3.77 3.92
Dissipation Factor0.1 kHz 0.010 0.040 0.08 0.003 0.01 0.01 0.02 0.011.0 kHz 0.011 0.027 0.04 0.007 0.01 0.01 0.02 0.02
10.0 kHz 0.012 0.026 0.03 0.011 0.01 0.01 0.02 0.02100.0 kHz 0.013 0.023 0.03 0.014 0.01 0.02 0.02 0.02
Insulation Resistance, ohms 2.67x10e+13 1.61x10e+12 7.5x10e+11 5.19x10e+13 4.09x10e+13 1.23x10e+14 4.57x10e+13 2.15x10e+13Volume Resistivity, ohms/cm 2.53x10e+15 1.02x10e+14 1.5x10e14 2.69x10e+15 2.61x10e+15 7.41x10e+15 2.98x10e+15 1.37x10e+15Dielectric Strength, Volts/mil 385 365 410 350 355 385 395 365
Flammability Rating – – UL 94HBat1/16" – – – – –UL File No. E106917
Insulation System – – UL 1446 – – – – –UL File No. E106917
Refer to page 44 for Hysol® package sizes and ordering information.
PO
TTING
& E
NC
AP
SU
LATING
• EP
OX
IES
, PO
LYU
RE
THA
NE
S, H
OT M
ELTS
& S
ILICO
NE
SA
SS
EM
BLY
PR
OD
UC
TS
43
Epoxy System 3142™ Epoxy System 3144™
System Characteristics 3142™/3162™ 3142™/3163™ 3142™/3164™ 3142™/3165™ 3144™/3162™ 3144™/3163™ 3144™/3164™ 3144™/3165™
Typical Uncured PropertiesViscosity, cP
Resin 95,000 95,000 95,000 95,000 18,000 18,000 18,000 18,000Hardener 120 450 105 55 120 450 105 55
Mixed 6,000 7,000 8,000 18,000 4,000 2,500 3,000 7,000
Working Time77°F(25°C) 10-15 min. 2 hrs. 25 min. 80 min. 15-20 min. 3 hrs. 30-40 min. 3 hrs.
at 200 g at 400 g at 400 g at 400 g at 200 g at 200 g at 200 g at 400 g
Gel Time77°F(25°C) 25-35 min. >3 hrs. 50 min. 2.5 hrs. 30-40 min. >5 hrs. 60-90 min. 6 hrs.
at 200 g at 400 g at 400 g at 400 g at 200 g at 200 g at 200 g at 400 g
Cure CycleNormal 77°F(25°C) 24 hrs. 48 hrs. 24 hrs. 24 hrs./77°F 16 hrs. 24 hrs. 24 hrs. 24 hrs./77°F
+4 hrs./200°F +2 hrs./200°F
Alternate 150°F(66°C) 2 hrs. 4 hrs. 2 hrs. 4 hrs./+200°F 2 hrs. 4 hrs. 2 hrs. 4 hrs./+200°F
Mix RatioBy Weight 100:9 100:10.9 100:14.3 100:4.1 100:13 100:16 100:21 100:6.1By Volume 4.5:1 3.6:1 2.8:1 9.7:1 4.5:1 3.5:1 2.8:1 9.3:1
ColorResin black black black black black black black black
Hardener clear amber amber clear clear clear clear clearMixed black black black black black black black black
Specific GravityResin 2.40 2.40 2.40 2.40 1.68 1.68 1.68 1.68
Hardener 0.99 0.96 0.97 0.96 0.99 0.96 0.97 0.96Mixed 1.54 1.53 1.50 1.62 1.52 1.53 1.50 1.62
Typical Cured PropertiesHardness, Shore D 90 90 85 90 80 75 55 85
Tg, °C 42 30 29 84 25 20 15 28CTE above Tg, mm/mm°C 97.2x10e-6 96.1x10e-6 106x10e-6 87.7x10e-6 138x10e-6 140x10e-6 147x10e-6 109x10e-6CTE below Tg, mm/mm°C 28.2x10e-6 33.5x10e-6 51.9x10e-6 26.9x10e-6 39x10e-6 67.1x10e-6 93.4x10e-6 42.1x10e-6
Thermal ConductivityWatts/Meter°C 1.40 1.40 1.27 1.14 0.41 – – –
Typical Electrical PropertiesDielectric Constant
0.1 kHz 4.87 5.28 5.51 5.65 4.24 4.29 5.31 4.261.0 kHz 4.83 5.20 5.35 5.57 4.12 4.03 4.87 4.17
10.0 kHz 4.78 5.12 5.21 5.46 4.03 3.84 4.52 4.10100.0 kHz 4.72 5.02 5.06 5.34 3.96 3.70 4.23 4.05
Dissipation Factor0.1 kHz 0.01 0.01 0.02 0.01 0.02 0.04 0.06 0.011.0 kHz 0.01 0.01 0.02 0.01 0.02 0.04 0.06 0.01
10.0 kHz 0.01 0.01 0.02 0.01 0.01 0.03 0.05 0.01100.0 kHz 0.01 0.01 0.02 0.01 0.01 0.02 0.04 0.01
Insulation Resistance ohms 5.31x10e+13 3.65x10e+13 2.75x10e+12 4.09x10e+13 1.79x10e+13 1.60x10e+12 4.23x10e+10 3.14x10e+13Volume Resistivity ohms/cm 3.47x10e+15 2.55x10e+15 1.65x10e+14 2.61x10e+15 7.97x10e+14 1.05x10e+14 2.85x10e+12 1.84x10e+15Dielectric Strength Volts/mil 345 355 345 335 375 360 365 340
Flammability Rating – – – – UL 94V-O at 1/8" - – –UL File No. E106917
Refer to page 44 for Hysol® package sizes and ordering information.
PO
TTIN
G &
EN
CA
PS
ULA
TIN
G •
EP
OX
IES
, PO
LYU
RE
THA
NE
S, H
OT
ME
LTS
& S
ILIC
ON
ES
AS
SE
MB
LY P
RO
DU
CT
S
44
HOT MELT ADHESIVES
In addition to structural bonding,Loctite® brand Hysol® Hot MeltAdhesives are also well suited forfast, deep potting applicationsrequiring large gap fills in a highspeed manufacturing environment.
Loctite® 1942™ Hysol®
Hot Melt Adhesive
EVA BasedMedium setting, general purposehot melt adhesive. Excellentadhesion to wood and manyplastics.
Loctite® 7901™ Hysol®
Hot Melt Adhesive
PolyamideLow viscosity polyamide usedextensively for potting andencapsulating.
1942™ Hysol®
3650™ Hysol®
3651™ Hysol®
7809FR™Hysol®
7811™ Hysol®
7901™ Hysol®
8326683267832688326983271832728327383274832758327683277
3130231297
31303
833888339083391
8333783339
83341833428334383344
5 lb. sample bag pellets40 lb. carton pelletsMaxistick™ sample 7 oz. bagMaxistick™ 35 lb. cartonPT™ stick 35 lb. cartonMinistick™ 35 lb. cartonSuperstick™ sample 10" 5 oz. bagSuperstick™ 10" 25 lb. cartonSuperstick™ 4" 25 lb. cartonPolyshot™ sample 12 oz. bagPolyshot™ 35 lb. carton
22 lb. pellets44 lb. pellets
26.4 lb. squares
5 lb. bag sample pelletsSuperstick™ sample 10" 13 oz. bagPolyshot™ 13 oz. bag
5 lb. bag sample pelletsPolyshot™ sample 13 oz. bag
5 lb. bag sample pellets40 lb. carton pelletsPolyshot™ sample 13 oz. bagPolyshot™ 25 lb. pail
Tan
Lightbeige
Beige
Amber
Amber
Amber
LOCTITE® BRAND HYSOL® HOT MELT ADHESIVESPROPERTIES CHART
Col
or
5,000
2,900
10,000
7,000
6,400
750
Visc
osity
(cP)
at
Dis
pens
e Te
mpe
ratu
re
250
305
334
363
400
260
Tens
ile S
tren
gth
(psi
)
FDA CFR175.105
–
–
UL Classifiedfor U.S.
–
–
Key
Spec
ifica
tions
30seconds
60-80seconds
80-100seconds
35seconds
35seconds
35seconds
Ope
n Ti
me
142°F
176°F
266°F
240°F
266°F
300°F
Tem
pera
ture
Re
sist
ance
ItemNumber ContainerP R O D U C T
500
43
790
373
1,200
80
% E
long
atio
n–
87
55
85
–
84
Har
dnes
s(S
hore
A)
1 5 gal. & 55 gal. are made-to-order items.* 1 pint fill.
Product No. 1 quart 1 gallon 5 gallon1 55 gallon1
Hysol® Epoxy Resins
3140™ – 39944 39945 –3141™ – 39947 39948 –3142™ – 39950 39951 399523144™ – 39953 39954 –
Hysol® Epoxy Hardeners
3162™ 39960 39961 39962 –3163™ 39964 39965 39966 –3164™ – 39969 39970 –3165™ 39395* 39973 – –
Product No. 1 quart 1 gallon 5 gallon1 55 gallon1
Hysol® Polyurethane Resins
3173™ 39984 39985 39986 –
Hysol® Polyurethane Hardeners
3182™ – 39995 39996 399973183™ – 39998 39999 –3184™ – 39398 39397 –
LOCTITE® BRAND HYSOL® PACKAGE SIZES AND ORDERING INFORMATION
Refer to page 27 for related Hot Melt Stick size/diameter chart.
PO
TTING
& E
NC
AP
SU
LATING
• EP
OX
IES
, PO
LYU
RE
THA
NE
S, H
OT M
ELTS
& S
ILICO
NE
SA
SS
EM
BLY
PR
OD
UC
TS
45
SILICONE POTTING COMPOUNDS
Loctite® brand silicones are single-component,tough protective potting and encapsulatingcompounds that seal components againstmoisture, solvents, and environmental conditions.Loctite® brand Nuva-Sil® products cure in as littleas 30 seconds to depths of .150" when exposedto UV light, while Loctite® brand RTV siliconescure in 24 hours at room temperature whenexposed to atmospheric moisture.
Loctite® 5031™ Nuva-Sil®
Silicone Potting Compound
High Adhesion/Visible LightA low viscosity, self-leveling, UV orvisible light curing silicone for highspeed shallow potting, coating, and sealing applications. Provides high adhesion for difficult-to-bond substrates.
5031™Nuva-Sil®
5091™Nuva-Sil®
4008640087
1741218074
300 ml cartridge40 lb. pail
300 ml cartridge40 lb. pail
5,500
5,500
UV/visible light/moisture60 sec.
at 40mW/cm2
UV/moisture60 sec.
at 40mW/cm2
LOCTITE® BRAND SILICONE POTTINGCOMPOUNDS PROPERTIES CHART
Visc
osity
, cP
(mix
ed)
–
UL Classifiedfor U.S.
Agen
cyAp
prov
als
34 shore A
34 shore A
Har
dnes
s
Seconds
Seconds
Gel
Tim
e
Cur
e Sc
hedu
le(C
ure/
Alt.
Cur
e)
ItemNumber ContainerP R O D U C T
Indicates worldwide availability.
NEW
NEW
RE
TAIN
ING
AS
SE
MB
LY P
RO
DU
CT
S
46
Loctite Corporation, now Henkel Corporation,the pioneer of anaerobic adhesives, has appliedthis technology to create retaining compoundsthat increase the shear strength of cylindrical,non-threaded assemblies. Finding wideacceptance as a standard method forassembling press and slip-fitted parts, Loctite®
brand retaining compounds fill the “inner space”between components and cure to form a strongprecision assembly. Formulated in a selection ofviscosities, gap filling ability, flexibility, and strengthcharacteristics, Loctite® brand retainingcompounds can be applied with automatedprocess equipment or dispensed manually.
RETAINING
Loctite® 638™
Retaining Compound
Slip Fit/Maximum StrengthA maximum strength retainingcompound for use where highdynamic force or cyclic loading isexpected. Locks cylindricalassemblies up to 0.010" diametralclearance. Fixtures in 5 minutes.
Loctite® 640™
Retaining Compound
Press Fit/High Strength/High TemperatureA medium viscosity retainingcompound that resists temperaturesto 400°F.
Loctite® 641™
Retaining Compound
Press & Slip Fit/Controlled StrengthA controlled strength retainingcompound that is ideal forcylindrical parts that requiredisassembly. Recommended formaximum diametral clearance of0.008". Fixtures in 20 minutes.
Loctite® 620™
Retaining Compound
Slip Fit/High Temperature A high temperature (450°F), highviscosity liquid retaining compound.Provides a shear strength of over3,800 psi on steel. Locks andsecures metal cylindricalassemblies up to 0.015" diametralclearance. Prevents metal frettingand corrosion. Seals against leakage.
Loctite® 635™
Retaining Compound
Slip Fit/High Strength/Slow CureA high viscosity, high strengthretaining compound with slow curespeed to permit readjustment ofparts during assembly.
Loctite® 603™
Retaining Compound
Press Fit/Oil TolerantA retaining compound tolerant ofoil and other contamination. Sealsand secures cylindrical assembliesup to 0.005" diametral clearance.Fixtures in 10 minutes. Preventsfretting and corrosion of metal assemblies.
Loctite® 609™
Retaining Compound
Press Fit/General PurposeA low viscosity retaining compoundthat bonds rigid metal assemblies.Ideal for gap distances up to 0.005"diametral. Fixtures in 10 minutesand provides a shear strength of3,000 psi after 24 hours. Easilyjoins dissimilar metals. Withstandstemperatures to 300°F.
New semi-solid
retaining QuickStix™ are
available! See pages 94 & 95
for more details.
RE
TAIN
ING
AS
SE
MB
LY P
RO
DU
CT
S
47
Loctite® 648™
Retaining Compound
Press Fit/High Strength/Rapid CureA retaining compoundrecommended for continuousworking temperatures up to 300°F.Fills gaps up to 0.006" diametralclearance. Fixtures in 5 minutes.
Loctite® 660™ Quick Metal®
Retaining Compound
Press Fit RepairA creamy, non-runningadhesive/sealant. Repairs wornmachine parts. Restores correct fitto mating assemblies. Fills gaps upto 0.020" diametral clearance.
Loctite® 661™
Retaining Compound
Slip Fit/UV Dual CureFast curing, high strength retainingcompound. Achieves fixturestrength in 5 minutes or in 15seconds by exposing edge fillets to high intensity long wavelengthUV light.
Loctite® 675™
Retaining Compound
Press Fit/Medium StrengthA low viscosity retainingcompound that augments press fit assemblies. Slow cure speedpermits readjustment of partsduring assembly.
Loctite® 680™
Retaining Compound
Slip Fit/High StrengthA high viscosity retainingcompound for joining fittedcylindrical parts. Fixtures in 10 minutes and provides a shearstrength up to 4,000 psi on steelafter 24 hours. Fills diametral gapdistances up to 0.015".
603™
609™
620™
635™
638™
640™
641™
648™
660™ Quick Metal®
661™
675™
680™
214402144121442
6090560921609316094160943
6200562015620406207062085
6353163541
214472144821449
6403164041
2880221458
214432144421445
660106604030287
66141
67541
6800568015680356806068090
10 ml bottle50 ml bottle250 ml bottle
.5 ml capsule10 ml bottle50 ml bottle250 ml bottle1 liter bottle
.5 ml capsule10 ml bottle50 ml bottle250 ml bottle1 liter bottle
50 ml bottle250 ml bottle
10 ml bottle50 ml bottle250 ml bottle
50 ml bottle250 ml bottle
10 ml bottle50 ml bottle
10 ml bottle50 ml bottle250 ml bottle
6 ml tube50 ml tube250 ml tube
250 ml bottle
250 ml bottle
.5 ml capsule10 ml bottle50 ml bottle250 ml bottle1 liter bottle
For close fittingparts with lightcontamination
1st generationto augmentpress fits
For hightemperatureapplications
1st generationhigh strengthfor slip fits
High strengthfor loosefitted parts
For hightemperatureapplications
Medium strength for easierdisassembly
Fast fixturing for close fitting parts;high strength for stainless steel
For repair of worn machinery parts
Fast UV anaerobic curing
1st generationfor closefitting parts
High strengthfor slip fitted parts
125
125
8,500
2,000
2,500
600
525/1,950Thixotropic
500
250,000/1,500,000Thixotropic
500
125
1,250
Green
Green
Green
Green
Green
Green
Yellow
Green
Silver
Amber
Green
Green
.005"
.005"
.015"
.010"
.015"
.007"
.008"
.006"
.020"
.006"
.005"
.015"
3,770
2,300(min.)
3,800
4,500
4,500
3,000
1,700
3,900
3,335
3,500
3,000
2,800
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
450°F
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
400°F
-65°Fto
300°F
-65°Fto
350°F
-65°Fto
300°F
-65°Fto
350°F
-65°Fto
300°F
-65°Fto
300°F
N™ or
T™
N™ or
T™
N™ or
T™
N™ or
T™
N™ or
T™
N™ or
T™
N™ or
T™
N™ or
T™
N™ or
T™
N™ or
T™
N™ or
T™
N™ or
T™
Fixture - 10 min.Full - 24 hrs.
Fixture - 10 min.Full - 24 hrs.
Fixture - 30 min.Full - 24 hrs.
Fixture - 1 hr.Full - 24 hrs.
Fixture - 5 min.Full - 24 hrs.
Fixture - 1 hr.Full - 24 hrs.
Fixture - 20 min.Full - 24 hrs.
Fixture - 5 min.Full - 24 hrs.
Fixture - 20 min.Full - 24 hrs.
Fixture - 5 min.Full - 24 hrs.
Fixture - 20 min.Full - 24 hrs.
Fixture - 10 min.Full - 24 hrs.
–
MIL-R-46082Bfor existing designs,ASTM D-5363 for new designs,CFIA
CFIA, ABS
MIL-R-46082Bfor existing designs,ASTM D-5363**
CFIA
MIL-R-46082Bfor existing designs,ASTM D-5363**
CFIA
–
CFIA
–
MIL-R-46082Bfor existing designs,ASTM D-5363**
NSF/ANSI 61,ABS
LOCTITE® BRAND RETAINING COMPOUNDS PROPERTIES CHART
Typi
cal U
se
Col
or
Visc
osity
, cP
Max
. Gap
Fill
(D
iam
etra
l)
Tem
pera
ture
Ra
nge
Shea
r St
reng
thSt
eel/S
teel
, ps
i*
Reco
mm
ende
d Pr
imer
1.10
1.10
1.16
1.05
1.09
1.12
1.07
1.13
1.13
1.11
1.09
1.11
Spec
ific
Gra
vity
Agen
cyAp
prov
als
Cur
e Sp
eed,
Stee
l at 2
5°C
ItemNumber ContainerP R O D U C T
* Varies with substrates. ** For new designs. Indicates worldwide availability.
SU
RFA
CE
PR
EPA
RA
TIO
NA
SS
EM
BLY
PR
OD
UC
TS
48
Henkel Corporation offers a complete line ofLoctite® brand surface preparation products toensure the maximum performance of Loctite®
brand adhesives and sealants.Loctite® brand accelerators are used to
increase the cure speed and gap-fillingcapabilities of cyanoacrylate adhesives.Activators are specially-engineered curingagents for structural adhesives. Loctite® brandprimers are used to ensure cure on inactivesurfaces and speed the cure of machineryadhesives.
All Loctite® brand surface preparationproducts are available in ozone-safe (non-CFC),solvent-based and solventless formulations.
ACCELERATORS
Loctite® 7452™ Tak Pak®
Accelerator
This accelerator, with aggressivecleaning properties, promotes thecure speed of all Loctite® brandcyanoacrylate adhesives.
Loctite® 7113™ Accelerator
This accelerator features long on-part life. Use with Loctite® brandcyanoacrylate adhesives.
SURFACE PREPARATION
ACTIVATORS
Loctite® 7075™ Activator
An acetone-based activator thatpromotes the proper cure ofLoctite® 324™ and 325™Speedbonder™ StructuralAdhesives.
Loctite® 7380™ Depend®
Activator
This solvent-free activator allowsimmediate mating of parts. Usewith most Loctite® brand acrylicadhesives.
Loctite® 7387™
Depend® Activator
This activator promotes the cure ofmost Loctite® brand acrylicadhesives. This is a flammableproduct.
PRIMERS
Loctite® 7471™ Primer T™
A solvent-based primer that speedsthe cure of all Loctite® brandanaerobic adhesives and ensuresproper cure on inactive metals.
Loctite® 7649™ Primer N™
A solvent-based primer that featuresvery long on-part life. Use to speedthe cure of all Loctite® brandanaerobic products and ensureproper cure on inactive metals.Ideal for cure conditions belowroom temperature.
Loctite® 770™ Prism® Primer
An adhesion promoter formulatedfor use with polyolefins and otherlow surface energy plasticmaterials. Use with Loctite® brandcyanoacrylate adhesives. Fast drytime and long on-part life.
SU
RFA
CE
PR
EPA
RA
TIO
NA
SS
EM
BLY
PR
OD
UC
TS
49
7075™
7380™Depend®
7387™Depend®
25062
2134922671
198221982419907
188611886221088
25062
1 qt. can4.5 oz. aerosol can
1 liter can1.75 fl. oz. bottle1 gallon can
1.75 fl. oz. bottle1 qt. can4.5 oz. aerosol can
1 liter bottle
Amber
Light brown
Light brown
Thin green/fluorescent
Acetone
Monomer
Heptane/Isopropanol
Methacrylate
324, 325
Structurals
Structurals
Anaerobicson dichromatesurfaces
2 hrs.
2 hrs.
2 hrs.
1 hr.
LOCTITE® BRAND ACTIVATORSPROPERTIES CHART
Col
or
Base
Appl
icat
ion
On-
Part
Life
3 minutes
None
None
None
Dry
Tim
e
ItemNumber ContainerP R O D U C T
2
43
1.5
1.03
Visc
osity
, cP
712™ Tak Pak®
770™ Prism®
793™ Prism®
7090™
7109™ Tak Pak II®
7113™
7452™ Tak Pak®
7453™ Tak Pak®
7471™ Primer T™
7649™ Primer N™
203521863618390
1839618397
1865020246
1936812695
2244023034
1960519606
1849018580186371857518576
20282
192672247719268
1926938402213472134819266
1.75 fl. oz. bottle0.7 fl. oz. metered mist1 gal. can
1.75 fl. oz. bottle16 fl. oz. can
1.75 fl. oz. bottle16 fl. oz. bottle
1 fl. oz. bottle1 liter bottle
1.75 fl. oz. bottle1 qt. bottle
1.75 fl. oz. bottle1 gal. can
1.75 fl. oz. brush-cap bottle1.75 fl. oz. spray-cap bottle0.7 fl. oz. metered mist1 qt. can1 gal. can
1.75 fl. oz. bottle
1.75 fl. oz. bottle4.5 oz. aerosol can1 gallon can
1.75 fl. oz. glass bottle1.75 fl. oz. aluminum bottle25 gm aerosol can4.5 oz. aerosol can1 gallon can
Clear/amber
Colorless
Clear/light amber
Light amber
Clear/amber
Clear
Clear/amber
Clear/amber
Amber
Clear/green
Isopropanol
Heptane
Propylene based glycol ether/water
No solvent
Perfluorocarbon
Heptane
Acetone
Acetone (electronic grade)
Acetone/Isopropanol
Acetone
Allcyanoacrylates
Allcyanoacrylates
Allcyanoacrylates
Anaerobics
Allcyanoacrylates
Allcyanoacrylates
Allcyanoacrylates
Allcyanoacrylates
Anaerobics
Anaerobics
1 min.
8 hrs.
<2 hrs.
1 hr.
1 min.
24 hrs.
1 min.
1 min.
7 days
30 days
LOCTITE® BRAND ACCELERATORS/PRIMERSPROPERTIES CHART
Col
or
Base
Appl
icat
ion
MIL-46050Cfor existing designs,CFIA
CFIA
–
–
–
–
MIL-46050Cfor existing designs
–
MIL-S-22473E for existing designs,ASTM D-5363 for new designs
MIL-S-22473E for existing designs,ASTM D-5363 for new designs,NSF/ANSI 61,NSF P1,CFIA
Agen
cy
Appr
oval
s
On-
Part
Life
<30 sec.
30 sec.
<10 min.
<10 min.
<5 sec.
1 min.
<30 sec.
<30 sec.
30-70sec.
30-70sec.
Dry
Tim
e
ItemNumber ContainerP R O D U C T
1
1.25
3
3
3
0.4
0.4
0.4
2
2
Visc
osity
, cP
Indicates worldwide availability.
Q. When should I use a primer?
A. Use a primer when both surfaces areconsidered inactive. It is necessaryto apply the primer to one surface, in most cases, unless gaps areexcessive. See chart.
ACTIVE METALS INACTIVE METALS
Iron Bronze Plated Parts CadmiumPlain Steel Nickel Anodized Aluminum MagnesiumCopper Manganese (Alodine, Irridite) Natural or Chemical Black OxideBrass Monel Titanium Magnetite SteelCommercial Aluminum Kovar Stainless Steel Iconel(with copper content, e.g. 6061) Galvanized Steel Silver
Zinc GoldPure Aluminum Plastics
TH
RE
AD
LOC
KIN
GA
SS
EM
BLY
PR
OD
UC
TS
50
Invented by Loctite Corporation, now HenkelCorporation, as a revolutionary method to lock andseal threaded fasteners, Loctite® brand liquidthreadlockers have found wide acceptance in arange of applications – from delicate electroniccomponents to heavy construction equipment.
Loctite® brand threadlockers are available invarying viscosities and strengths for virtually anyapplication, including exposure to extremeenvironments.
THREADLOCKING
Loctite® 262™ Threadlocker
Medium to High StrengthA permanent threadlocker forfasteners up to 3⁄4" (20 mm)diameter. High lubrication for easyassembly. Excellent for preventingrust and corrosion in extremechemical/environmental conditions.
Loctite® 266™ Threadlocker
High Strength/High TemperatureFast fixturing threadlocker resistsoil and mild surface contaminationat temperatures to 450°F. Locksfasteners up to 3⁄4" (20 mm) in diameter.
Loctite® 243™ Threadlocker
Medium Strength/Oil ResistantA general purpose, mediumstrength threadlocker withimproved oil tolerance. For fasteners between 1⁄4" and 3⁄4" (6 to 20 mm) diameters.
Loctite® 246™ Threadlocker
Medium Strength/High TemperatureThis threadlocker resists oil andmild surface contamination atcontinuous temperatures to 450°F.Suitable for fasteners between 1⁄4"and 3⁄4" (6 to 20 mm) diameters.
LIQUID THREADLOCKERS
Loctite® 222MS™
Threadlocker
Low Strength/Small Screw Ideal for fastener diameters of 1⁄4"(6 mm) and smaller. Controlledlubricity for accurate clamp loads.Parts can be separated using hand tools.
Loctite® 242® Threadlocker
Medium StrengthA general purpose, removablethreadlocker for fasteners between1⁄4" and 3⁄4" (6 to 20 mm) diameters.Controlled lubricity for accurateclamp loads. Parts can beseparated using hand tools.
New Innovative Technology!
See pages 96 & 97 for details
on the new semi-solid
threadlocking QuickStix™.
TH
RE
AD
LOC
KIN
GA
SS
EM
BLY
PR
OD
UC
TS
51
Loctite® 290™ Threadlocker
Wicking GradeA medium strength threadlockerfor pre-assembled bolts up to 1⁄2" (12 mm). Penetrates threads bycapillary action. Secures setscrews and other assemblies aftersettings are completed. Sealswelds and porous metal parts.Protects threads from rust andcorrosion. Localized heating andhand tools are needed for disassembly.
Loctite® 294™ Threadlocker
Wicking Grade/High TemperatureIdeally suited for pre-assembledfasteners. Performs well on oily fasteners.
Loctite® 425™ Assure™
Instant Adhesive
Surface Curing ThreadlockerLow strength, fast curingthreadlocker for plastic fasteners.Can be used as a tamper-proofingagent for the head of screws. Can be applied before or after assembly.
Loctite® 2432™ Threadlocker
Low Halogen/Low SulfurThis medium strength threadlockerwas especially developed for use onsensitive metals like Titanium, usedin the Nuclear Industry. Parts canbe separated using hand tools.
Loctite® 2440™ Threadlocker
Primerless/Medium StrengthThis threadlocker is particularly fast curing, thereby reducing oreliminating the need for primers.Performs well on all substrates. It develops useable strength (100in.-lbs.) within one hour. Parts canbe separated using hand tools.
Loctite® 2760™ Threadlocker
Primerless/High StrengthThis threadlocker is particularly fast curing, thereby reducing oreliminating the need for primers.Particularly suitable for heavy dutyapplications where resistance toheavy shock, vibration, and stresslevels are required.
Loctite® 271™ Threadlocker
High StrengthA high strength, low viscositythreadlocker for fasteners up to 1" (25 mm) in diameter.
Loctite® 272™ Threadlocker
High Strength/High TemperatureWithstands temperatures to 450°F.Provides a fast cure on mostsurfaces, including “as received”fasteners. Recommended for boltsup to 11⁄2" (36 mm) in diameter. Heat and hand tools are required for disassembly.
Loctite® 277™ Threadlocker
High StrengthLocks fasteners up to 11⁄2" (36 mm). Protects threads fromrust and corrosion. Removablewith heat and hand tools.
For technical informationand/or product availability,
call: 1-800-LOCTITE (562-8483)or visit us on the web at:
www.loctite.com
TH
RE
AD
LOC
KIN
GA
SS
EM
BLY
PR
OD
UC
TS
52
220™
222™
222MS™
242®
243™
246™
262™
266™
271™
272™
277™
290™
294™
425™Assure™
2432™
2440™
2760™
373883918622041
2146321464
22205222212223122241
2420524221242312424124243
2397724077240782407921433
295132951429515
2620526221262312624126243
267722677326774
2710527121271312714127143
272402727027285
21434277312774127743
2900529021290312904129043
27934279352793627937
4254042561
25523
339463394733948
32526325253252732528
10 ml bottle50 ml bottle250 ml bottle
10 ml bottle50 ml bottle
.5 ml capsule10 ml bottle50 ml bottle250 ml bottle
.5 ml capsule10 ml bottle50 ml bottle250 ml bottle1 liter bottle
.5 ml capsule10 ml bottle50 ml bottle250 ml bottle1 liter bottle
10 ml bottle50 ml bottle250 ml bottle
.5 ml capsule10 ml tube50 ml bottle250 ml bottle1 liter bottle
10 ml bottle50 ml bottle250 ml bottle
.5 ml capsule10 ml bottle50 ml bottle250 ml bottle1 liter bottle
50 ml bottle250 ml bottle1 liter bottle
10 ml bottle50 ml bottle250 ml bottle1 liter bottle
.5 ml capsule10 ml bottle50 ml bottle250 ml bottle1 liter bottle
.5 ml capsule10 ml bottle50 ml bottle250 ml bottle
20 gm bottle1 lb. bottle
50 ml bottle
10 ml bottle50 ml bottle250 ml bottle
10 ml bottle50 ml bottle250 ml bottle1 liter bottle
Wicking gradefor small, pre-assembledfastenersunder 1/4"
Small screwsunder 1/4"
Easy removalsmall screwsunder 1/4"
Removablegrade up to 1/4" to 3/4" bolts
For 1/4" to 3/4" bolts. Provides fast cure on steelwithout primer
Hightemperaturemed. strength
High strengthlocking up to3/4" bolts
High strengthhightemperature
High strengthfor fastenersup to 1" diam.
High temperatureapplications
High strengthfor large bolts
Wicking grade for preassembled parts
High temperature,wicking grade
For small metaland plastic fasteners andtamper-proofing
Low halogen,low sulfur,med. strength
Primerless,mediumstrength
Primerless,highstrength
20
1,200/5,000
Thixotropic
1,200/5,000
Thixotropic
1,200/5,000
Thixotropic
2,250/12,000
Thixotropic
2,600
1,800/5,000
Thixotropic
3,750-9,000
500
9,500
7,000
12
34
80
300
1,800/6,800
Thixotropic
2,900/10,000
Thixotropic
Blue
Purple
Purple
Blue
Blue
Blue
Red
Red-orange
Red
Red
Red
Green
Green
Blue
Blue
Blue
Red
85/170
53/30
53/30
110/43
180/62
170/48*
189/275
270/75
250/275
200/220
275/275
85/250
289/237
4/2
150/53
215/53*
325/320*
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
450°F
-65°Fto
300°F
-65°Fto
450°F
-65°Fto
300°F
-65°Fto
450°F
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
450°F
-65°Fto
180°F
-65°Fto
300°F
-65°Fto
300F
-65°Fto
300°F
N™ or
T™
N™ or
T™
N™ or
T™
N™ or
T™
N™ or
T™
N™ or
T™
N™ or
T™
N™ or
T™
N™ or
T™
N™ or
T™
N™ or
T™
N™ or
T™
N™ or
T™
–
–
N™ or
T™
N™ or
T™
Fixture - 6 min.Full - 24 hrs.
Fixture - 10 min.Full - 24 hrs.
Fixture - 10 min.Full - 24 hrs.
Fixture - 10 min.Full - 24 hrs.
Fixture - 5 min.Full - 24 hrs.
Fixture - 20 min.Full - 24 hrs.
Fixture - 5 min.Full - 24 hrs.
Fixture - 10 min.Full - 24 hrs.
Fixture - 10 min.Full - 24 hrs.
Fixture - 30 min.Full - 24 hrs.
Fixture - 60 min.Full - 24 hrs.
Fixture - 6 min.Full - 24 hrs.
Fixture - 6 min.Full - 24 hrs.
Fixture - 1.5 min.Full - 24 hrs.
Fixture - 30 min.Full - 24 hrs.
Fixture - 3 min.Full - 24 hrs.
Fixture - 4 min.Full - 24 hrs.
MIL-S-46163Afor existing designs,ASTM D-5363,**CFIA
–
MIL-S-46163Afor existing designs,ASTM D-5363,**NSF P1, CFIA
MIL-S-46163A for existing designs, ASTM D-5363,**NSF/ANSI 61,NSF P1, ABS, CFIA
NSF/ANSI 61,CFIA
–
MIL-S-46163A for existing designs,ASTM D-5363,**NSF P1, ABS,CFIA
CFIA
MIL-S-46163Afor existing designs,ASTM D-5363,**UL Classified for U.S.,CFIA
CFIA
MIL-S-46163Afor existing designs,ASTM D-5363**
MIL-S-46163Afor existing designs,ASTM D-5363,**NSF/ANSI 61,NSF P1, CFIA
–
–
–
–
CFIA
LOCTITE® BRAND LIQUID THREADLOCKERSPROPERTIES CHART
Typi
cal U
se
Col
or
Visc
osity
, cP
Tem
pera
ture
Ra
nge
No
–
–
–
–
Yes
–
Yes
–
–
–
–
Yes
–
–
–
–
Oil
Tole
rant
Reco
mm
ende
d Pr
imer
1.08
1.05
1.05
1.07
1.08
1.15
1.05
1.19
1.10
1.11
1.12
1.08
1.13
1.10
1.08
1.10
1.15
Spec
ific
Gra
vity
Agen
cyAp
prov
als
Cur
e Sp
eed,
Stee
l at 2
5°C
Torq
ue in
. lbs
.(M
10 S
teel
N
uts
& Bo
lts)
Brea
k/Pr
evai
l
ItemNumber ContainerP R O D U C T
Indicates worldwide availability.* Breakloose value. Brookfield RVT spindle 3.20 RPM/25 RPM. ** For new designs.
TH
RE
AD
LOC
KIN
GA
SS
EM
BLY
PR
OD
UC
TS
53
CHOOSING THE RIGHT LOCTITE® BRANDTHREADLOCKER FOR THE APPLICATION
Choosing the right Loctite® brand threadlocker for theapplication is simple. Just answer these questions.
1. Do you need a threadlocker that can be removed orone that is permanent?Loctite® brand threadlockers are available in removableor permanent formulations.
2. What size thread are you locking?Loctite® brand threadlockers are available in a variety ofstrengths to lock any size fastener.
3. Is the application a blind hole or a thru-hole?The application method for blind hole assemblies differsfrom standard thru-hole assemblies.
4. Are there threadlockers for pre-assembled bolts?Henkel offers Loctite® brand wicking grade threadlockersthat secure set screws and other assemblies aftersettings are completed.
5. What kind of metal(s) will be used?On two inactive metals such as stainless steel, zinc,magnesium, black oxide, cadmium, anodized aluminum,passivated, titanium, and others, a primer is needed tocure Loctite® brand threadlockers. If only one inactivemetal, no primer is needed.
6. What other environmental conditions exist?Loctite® brand threadlockers are formulated to meet anyapplication need – high temperature, severe vibration,and chemical resistance.
7. Will your application have to meet any agency approval?The Loctite® brand offers the broadest line of productsapproved by some of the most demanding regulatoryagencies – NSF*, UL*, Military.
ANSWERS TO THE MOST FREQUENTLYASKED QUESTIONS (FAQ) ABOUT USINGLOCTITE® BRAND THREADLOCKERS
Q. How do I disassemble parts? What is the procedure?
A. Use standard hand tools for disassembly of low andmedium strength threadlockers. For high strengththreadlockers, apply localized heat to nut or stud for 5 minutes at 450°F. Disassemble while hot.
Q. When should I use a primer with threadlockers andwhen is it not necessary?
A. Always use a primer when two inactive metals areinvolved, or when you need to speed up the curingprocess for faster return to service. See SurfacePreparation section for a list of active and inactive surfaces.
Q. Can I use threadlockers on plastic threads?
A. This is not recommended as softening and/or stresscracking can occur.
Q. I have excess squeeze-out of threadlocker product.Why hasn’t it cured?
A. The anaerobic chemistry will cure only between metalsurfaces when deprived of air.
Q. I used a permanent threadlocker on a blind holeapplication and the fastener still backed out withvibration. Why?
A. The application method for blind hole assembliesrequires that product be applied to both parts. If productis only applied to the fastener, air pressure will force theliquid threadlocker to escape as you torque it down. Lack of uniform coverage creates air pockets, causingincomplete cures which result in failures.
● Removable with hand tools● Adjustment screws● Calibration screws● Meters and gauges● Up to 1/4" diameters
LOW STRENGTH THREADLOCKERS
MEDIUM STRENGTH THREADLOCKERS
HIGH STRENGTH THREADLOCKERS
WICKING THREADLOCKERS
* NSF = National Sanitation Foundation. UL = Underwriter's Laboratories.
● Removable with hand tools● Machine tools and presses● Pumps and compressors● Mounting bolts● Gear boxes● Up to 3/4" diameters
● Permanent assembly● Heavy equipment● Suspension bolts● Motor and pump mounts● Bearing cap bolts and studs● Up to 1" and larger diameters
● Removable with heat andhand tools
● Preassembled fasteners● Instrumentation screws● Electrical connectors● Carburetors● Up to 1/2" diameters
TH
RE
AD
SE
ALI
NG
AS
SE
MB
LY P
RO
DU
CT
S
54
Loctite® brand liquid thread sealants seal andsecure metal pipes and fittings, filling the spacebetween threaded metal parts, and hardening toprevent leakage. Designed for low and highpressure applications, liquid thread sealants sealinstantly for low pressure testing. When fullycured, they seal to the burst strength of mostpiping systems.
THREAD SEALING
Loctite® 545™ Thread Sealant
Hydraulic/Pneumatic FittingsA liquid sealant for locking andsealing high pressure, fluid powersystems with tapered fittings.Contains no fillers and will not foulvalves or fluid filtering systems.
Loctite® 554™ Thread Sealant
Refrigerant SealantExcellent solvent resistance onthreaded fittings and pipes up to 3"in diameter. Recommended forrefrigeration systems and servicewith aggressive chemicals.
LIQUID THREAD SEALANTS
Loctite® 542™ Thread Sealant
Fine ThreadsA liquid sealant recommended forsealing the fine threads of hydraulicand pneumatic connectors.
Loctite® 564™ Thread Sealant
General PurposeIdeal for large threads where easierdisassembly is required.
Loctite® 565™ PST®
Thread Sealant
Controlled StrengthA general purpose instant sealantfor tapered and straight/taperedfittings. Controlled strength for ease of disassembly.
For the name and number ofyour nearest distributor, call:1-800-LOCTITE (562-8483)
or use the “DistributorLocator” on our web site at
www.loctite.com/distributor
New semi-solid
thread sealing QuickStix™
are available! See pages
98 & 99 for more details.
TH
RE
AD
SE
ALIN
GA
SS
EM
BLY
PR
OD
UC
TS
55
Loctite® 580™ PST®
Thread Sealant
Low Halogen/Low SulfurFor threaded fittings in fossil fuel, solar and hydro plant piping systems.
Loctite® 592™ PST®
Thread Sealant
Slow CureLocks and seals threaded fittings.Parts may be repositioned up to 24 hours after application.
Loctite® 5772™
Thread Sealant
Low Halogen/Low SulfurA medium strength thread sealantwith fast curing properties.Especially developed for use onsensitive metals, like Titanium, usedin the Nuclear Industry. Parts canbe separated using hand tools.
Loctite® 567™ PST®
Thread Sealant
High TemperatureWithstands temperatures to 400°Fwith excellent solvent resistance.Locks and seals tapered pipethreads and fittings, including highpressure applications.Disassembles with hand tools.
Loctite® 572™ Thread Sealant
Low StrengthLow strength sealant withmoderate fixture speed for use oncoarse threads.
Loctite® 577™ Thread Sealant
Coarse ThreadsMedium strength, general purposesealant for use on coarse, threaded components.
Loctite® 579™ Thread Sealant
Instant Seal A general purpose pipe sealant thatcures into a resistant plastic.Excellent solvent resistance andwithstands temperatures to 300°F(149°C). Sealing is effective onthreaded joints up to 2" in diameter.Lower locking strength secureselbows in any position but permitseasy disassembly.
TH
RE
AD
SE
ALI
NG
AS
SE
MB
LY P
RO
DU
CT
S
56
542™
545™
554™
564™
565™ PST®
567™ PST®
569™
571™
572™
577™
579™
580™ PST®
592™ PST®
5772™
2145337795
54505324295453154541
2588255441
2875428755
565075653156541565715654356566
5670756747567653324156790
569315694156943
57141
21454
2145621457
57941
58031
59214592315924159243
25524
50 ml bottle250 ml bottle
.5 ml capsule10 ml bottle50 ml bottle250 ml bottle
10 ml bottle250 ml bottle
50 ml tube250 ml tube
6 ml tube50 ml tube250 ml tube300 ml cartdg.1 liter bottle10 liter bottle
6 ml tube50 ml tube250 ml tube350 ml brush can1 liter bottle
50 ml bottle250 ml bottle1 liter bottle
250 ml bottle
50 ml tube
50 ml tube250 ml tube
250 ml tube
50 ml tube
6 ml tube50 ml tube250 ml tube1 liter bottle
50 ml bottle
Fine threads
Pneumatichydraulic sealant,no fillers
Refrigerantsealant, high strength
General purpose,low strength forlarge diameter pipe
Controlledstrength
For stainlesssteel and all othermetal fittings
Originalhydraulicsealant
Excellent solventresistance and high strength
Slow cure,low strength
Medium strength,coarse threads
Low strength,instant seal
Low halogen, low sulfur,PTFE free
Medium strength
Low halogen, low sulfur,medium strength,fast cure
525/1,850Thixotropic
14,000
2,500
90,500
300,000
540,000
400
2,000
17,000/50,000
Thixotropic
24,000/80,000
Thixotropic
20,000
600,000
350,000
7,500
Brown
Purple
Red
White
White
White
Brown
Brown
White
Yellow
Silver/brown
White
White
Yellow
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
400°F
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
300°F
-65°Fto
400°F
-65°Fto
300°F
N™ orT™
N™ orT™
N™ orT™
N™ orT™
N™ orT™
N™ orT™
N™ orT™
N™ orT™
N™ orT™
N™ orT™
N™ orT™
–
NF™
–
–
ABS, CFIA
CFIA
CSA International,ULC Classified for Canada,NSF/ANSI 61, CFIA
CSA International, UL Classified for U.S.,ULC Classified for Canada,NSF/ANSI 61, CFIA
CSA International,UL Classified for U.S.,ULC Classified for Canada,ABS, CFIA
CFIA
MIL-S-22473E for existing designs, ASTM D5363 for new designs
–
–
–
–
UL Classified for U.S.,ULC Classified for Canada,CFIA
–
LOCTITE® BRAND LIQUID THREAD SEALANTSPROPERTIES CHART
Typi
cal U
se
Col
or
Visc
osity
, cP
Tem
pera
ture
Ran
ge
Reco
mm
ende
d Pr
imer
1.06
1.02
1.02
1.17
1.10
1.14
1.05
1.10
1.25
1.09
1.10
1.08
1.21
1.09
Spec
ific
Gra
vity
Agen
cyAp
prov
als
ItemNumber ContainerP R O D U C T
Indicates worldwide availability.
TH
RE
AD
SE
ALIN
GA
SS
EM
BLY
PR
OD
UC
TS
57
LOCTITE® BRANDDISPENSINGEQUIPMENTA complete line of off-the-shelfequipment systems for dispensingLoctite® brand thread sealants isavailable from Henkel. Thesemanual and semi-automaticequipment systems are designed to reduce waste andoperator contact.
For more information, refer to theEquipment Section of this catalog.
Loctite®
Dial-A-Seal® Applicator,Item 998400
Dispenses 50 ml tubes,250 ml tubes, and 1 literbottles.
Loctite® 50 ml HandPump, Item 98414
Dispenser for 50 ml bottles.
Loctite® 250 ml HandPump, Item 97001
Dispenser for 250 ml bottles.
Loctite® PneumaticCartridge Dispenser, Item 97002
Use with 250 ml squeeze tubes or 300 ml cartridges.
Loctite®
Bond-A-Matic® 3000Dispenser, Items 982719 (0-15 psi),982722 (0-100 psi)
Dispenses liquid threadsealants packaged in 250 mltubes, 250 ml bottles, and 1 liter bottles.
In addition to our standard line of equipment, Henkel offers a number of resources tosupport your dispensing needs:• Custom Equipment Systems – Modify any Loctite® brand standard system or customize a system to meet your
specific assembly needs.
• Equipment Rental Program – Evaluate the performance of our equipment before making a capital investment.
• Equipment Web Site – Locate details on Loctite® brand standard and custom equipment; parts andaccessories; and equipment services. To learn more about our equipment, or to find the name and phonenumber of your nearest authorized distributor, visit www.loctite.com.
• Adhesives and Sealants Specialists – Henkel Adhesives and Sealants Specialists are available across thecontinent to personally assist you with new assembly challenges or to help you re-engineer an existingapplication for improved performance and cost savings using Loctite® brand products.
To take advantage of our complete equipment and service offerings, simply contact us at 1-800-LOCTITE (562-8483) or visit www.loctite.com/equipment.
NEW
BO
ND
ING
•
ME
DIC
AL
DE
VIC
E A
DH
ES
IVE
SM
ED
ICA
L P
RO
DU
CT
S
58
Henkel offers the most comprehensive line ofLoctite® brand adhesives and sealants availableto the medical device industry. These ISO-10993compliant products are designed specifically forthe assembly of medical devices where toxicitytesting and sterilization resistance are required.
BONDING MEDICAL DEVICE ADHESIVES
LIGHT CURE ACRYLIC ADHESIVES
Loctite® 3941™, 3942™,3943™ Light Cure Adhesives
High Performance/VariousSubstratesFluorescing, UV/visible acrylicadhesives. Ideal for applicationswhere high strength on a variety ofsubstrates and rapid surface cureare required.
Loctite® 3921™, 3922™,3924™, 3926™
Light Cure Adhesives
Plastic/MetalFluorescing, UV/visible adhesivesoffering superior sterilizationresistance. Ideal for bonding a widevariety of plastic and metalcomponents where environmentalresistance is required.
Loctite® 3971™, 3972™
Light Cure Adhesives
Plasticized Substrates Rapid curing, UV/visible,fluorescing adhesives that bondhighly plasticized materials,including PVC and polyurethane.
Loctite® 3201™, 3211™
Light Cure Adhesives
Polycarbonate/ThermoplasticsA high viscosity, UV/visibleadhesive that forms very flexiblejoints with minimal stress cracking.Ideal for bonding polycarbonateand other thermoplastics.
Loctite® 3301™, 3311™,3321™ Light Cure Adhesives
Plastic/MetalA low viscosity, slightly flexible,UV/visible adhesive. Excellent forbonding thermoplastics andplasticized PVC.
Loctite® 3341™
Light Cure Adhesive
Plasticized SubstratesA rapid cure, UV/visible, fluorescingadhesive that bonds highlyplasticized PVC and other difficult-to-bond substrates.
Loctite® 3345™
Light Cure Adhesive
Glass/MetalA medium viscosity, UV adhesivewith superior steam sterilizationresistance. Excellent for bondingglass, metal, and select plastics.
Loctite® 3381™
Light Cure Adhesive
Flexible/PlasticsA highly resilient, extremely flexible,thermal-cycling-resistant UVadhesive that bonds most plastics.
BO
ND
ING
• ME
DIC
AL D
EV
ICE
AD
HE
SIV
ES
ME
DIC
AL P
RO
DU
CT
S
59
EPOXY AND URETHANEADHESIVES
Loctite® 3981™, 3982™,3984™ Hysol® Epoxy Adhesives
High Performance/VariousSubstratesHighly fluorescent, one-part, heatcure epoxy adhesives offeringsuperior physical, environmentaland performance properties.
Loctite® M-11FL™ Hysol®
Medical Device Urethane Adhesive
A low viscosity urethane that bondspolycarbonate and a variety ofother plastics, glass, and metal.When fully set, product forms anultra-clear bond line and providesexcellent peel strength.
Loctite® M-21HP™ Hysol®
Medical Device Epoxy Adhesive
An off white, toughened epoxy thatprovides high peel resistance andhigh shear strength on a widevariety of plastics and metals.
Loctite® M-31CL™ Hysol®
Medical Device Epoxy Adhesive
A low viscosity epoxy that bondsglass, ceramic, metal, and manyrigid plastics. Ideal for applicationswhere optical clarity and excellentstructural and mechanicalproperties are required.
Loctite® M-121HP™ Hysol®
Medical Device Epoxy Adhesive
A high viscosity, non-sag epoxy for applications that require highimpact resistance and high peelstrength. Bonds dissimilarmaterials including aluminum,steel, and other metals, as well as a variety of plastics and ceramics.
CYANOACRYLATEADHESIVES
Loctite® 4011™ Prism®
Medical Device Adhesive
A low viscosity, instant adhesiveideally suited for dry environments,as well as for bonding acidic andporous surfaces.
Loctite® 4851™ Prism®
Instant Adhesive
FlexibleA medium viscosity, singlecomponent material for porous orabsorbent substrates.
Loctite® 4861™ Prism®
Instant Adhesive
FlexibleA high viscosity, single component,general-purpose material for gaps up to .008".
LIGHT CURE CYANOACRYLATE ADHESIVES
Loctite® 4306™/4307™
Flashcure® Light CureAdhesives
Low or high viscosity fluorescentadhesives achieve tack-free cures inless than 5 seconds. Surfaceversatile with shadow curecapability.
SILICONE ADHESIVES
Loctite® 5248™ Nuva-Sil®
Medical Device Sealant
A self-leveling, UV silicone ideal forsealing and bonding extruded andmoldable silicones, glass, and metals.
View our selector guide on-line, visit us
on the web at:
www.loctite.com
60
BO
ND
ING
•
ME
DIC
AL
DE
VIC
E A
DH
ES
IVE
SM
ED
ICA
L P
RO
DU
CT
S
3201™
3211™
3301™
3311™
3321™
3341™
3345™
3381™
3911™
3912™
3913™
3921™
3922™
3924™
3926™
3933™
3936™
3941™
3942™
3943™
3944™
3971™
3972™
1972719728
1973019731*
1973319734
1973619737
1973919740
2379223440
3341730688*
2578524690*
3653636537*
3653936540
3679136804
3648436485
3208332047*
3648836489
3649236493
3208432040*
3230432037*
3643736476
3648336481
3648036478
3821038212*
3679236805
3629436295
Clear/pale straw
Clear/pale straw
Clear/pale straw
Clear/pale straw
Clear/pale straw
Clear/straw/fluorescent
Clear/pale straw
Translucent/colorless
Transparent tohazy/fluorescent
Transparent tohazy/fluorescent
Transparent tohazy/fluorescent
Transparent tohazy/fluorescent
Transparent tohazy/fluorescent
Transparent tohazy/fluorescent
Transparent tohazy/fluorescent
Transparent tohazy/fluorescent
Transparent tohazy/fluorescent
Transparent tohazy/fluorescent
Transparent tohazy/fluorescent
Transparent tohazy/fluorescent
Fluorescent/pale yellow
Transparent tohazy/fluorescent
Transparent tohazy/fluorescent
Ultraviolet,visible
Ultraviolet,visible
Ultraviolet,visible
Ultraviolet,visible
Ultraviolet,visible
Ultraviolet,visible
Ultraviolet
Ultraviolet
Ultraviolet, visible
Ultraviolet, visible
Ultraviolet
Ultraviolet, visible
Ultraviolet, visible
Ultraviolet, visible
Ultraviolet, visible
Ultraviolet, visible
Ultraviolet, visible
Ultraviolet, visible
Ultraviolet, visible
Ultraviolet, visible
Ultraviolet, visible
Ultraviolet, visible
Ultraviolet, visible
4,000
10,000Thixotropic
150
300
5,000
450
1,500
5,000
100
6,300
8,500
150
300
1,100
4,500
3,250
10,000
480
1,200
6,000
5,000
320
4,500
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
Glass, metal, thermoplastic, polycarbonate
Glass, metal, thermoplastic, polycarbonate
Glass, metal, thermoplastic,polycarbonate, polyvinylchloride
Glass, metal, thermoplastic,polycarbonate, polyvinylchloride
Glass, metal, thermoplastic,polycarbonate, polyvinylchloride
Thermoplastics, polyvinylchloride
Glass, metal
Thermoplastic, thermoset plastic
Glass, metal, thermoplastic
Glass, metal, thermoplastic
Glass, metal, thermoplastic
Glass, metal, thermoplastic, polycarbonate, polyvinylchloride
Glass, metal, thermoplastic, polycarbonate, polyvinylchloride
Glass, metal, thermoplastic, polycarbonate, polyvinylchloride
Glass, metal, thermoplastic, polycarbonate, polyvinylchloride
Glass, metal, thermoplastic, polycarbonate
Glass, metal, thermoplastic, polycarbonate
Glass, metal, thermoplastic, thermoset plastic
Glass, metal, thermoplastic, thermoset plastic
Glass, metal, thermoplastic, thermoset plastic
Glass, metal, thermoplastic, polycarbonate, polyvinylchloride
Metal, thermoplastic, polyvinylchloride, polyurethane
Metal, thermoplastic, polyvinylchloride, polyurethane
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
25 ml syringe1 liter bottle
P R O D U C T ItemNumber Container
AppearanceClarity/Color Cure Type
Viscosity, cPBrookfield,
25°CTemperature
RangeAgency
ApprovalsKey Substrates
LOCTITE® BRAND LIGHT CURE ADHESIVES – ACRYLIC
* Made-to-order item.
4304™Flashcure®
4305™Flashcure®
4306™Flashcure®
4307™Flashcure®
3225432407
3226832409
3743937442*
3744137443*
Clear/pale green
Clear/pale green
Clear/palegreen/fluorescent
Clear/palegreen/fluorescent
Ultraviolet,visible, moisture
Ultraviolet, visible, moisture
Ultraviolet, visible, moisture
Ultraviolet, visible, moisture
20
900
20
900
-65°F to180°F
-65°F to180°F
-65°F to180°F
-65°F to180°F
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
Thermoplastic, polycarbonate, elastomer, metal
Thermoplastic, polycarbonate,elastomer, metal
Thermoplastic, polycarbonate,elastomer, metal
Thermoplastic, polycarbonate,elastomer, metal
1 oz. bottle1 lb. bottle
1 oz. bottle1 lb. bottle
1 oz. bottle1 lb. bottle
1 oz. bottle1 lb. bottle
LOCTITE® BRAND FLASHCURE® LIGHT CURE ADHESIVES – CYANOACRYLATE
NEW
61
BO
ND
ING
• ME
DIC
AL D
EV
ICE
AD
HE
SIV
ES
ME
DIC
AL P
RO
DU
CT
S
4011™Prism®
4013™Prism®
4014™Prism®
4031™Prism®
4061™Prism®
4081™Prism®
4161™Super Bonder®
4206™Prism®
4541™Prism®
4601™Prism®
4851™Prism®
4861™Prism®
4981™Super Bonder®
1868018681
2026818013
2026918014
1868218683
1868618687
1868818689
1974319744
2862828629*
1869018691
1869218693
3773237733
3770837711
1869418695
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Moisture
Moisture
Moisture
Moisture
Moisture
Moisture
Moisture
Moisture
Moisture
Moisture
Moisture
Moisture
Moisture
100
500
3
1,300
20
5
1,500
375
Gel
50
400
4,000
500
-65°F to180°F
-65°F to180°F
-65°F to220°F
-65°F to160°F
-65°F to180°F
-65°F to160°F
-65°F to180°F
-65°F to250°F
-65°F to180°F
-65°F to160°F
-65°F to125°F
-65°F to125°F
-65°F to220°F
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
Thermoplastic, thermoset plastic,metal, elastomer, including rubber
Thermoplastic, thermoset plastic, metal
Thermoplastic, thermoset plastic, metal
Thermoplastic, thermoset plastic, metal
Thermoplastic, thermoset plastic,metal, elastomer, including rubber
Thermoplastic, thermoset plastic, metal
Thermoplastic, thermoset plastic, metal
Thermoplastic, thermoset plastic,metal, elastomer, including rubber
Thermoplastic, thermoset plastic,metal, elastomer, including rubber
Thermoplastic, thermoset plastic, metal
Thermoplastic, thermoset plastic,metal, elastomer, including rubber
Thermoplastic, thermoset plastic,metal, elastomer, including rubber
Thermoplastic, thermoset plastic,metal, elastomer, including rubber
20 gm bottle1 lb. bottle
20 gm bottle1 lb. bottle
20 gm bottle1 lb. bottle
20 gm bottle1 lb. bottle
20 gm bottle1 lb. bottle
20 gm bottle1 lb. bottle
20 gm bottle1 lb. bottle
20 gm bottle1 lb. bottle
20 gm bottle200 gm bottle
20 gm bottle1 lb. bottle
20 gm bottle1 lb. bottle
20 gm bottle1 lb. bottle
20 gm bottle1 lb. bottle
P R O D U C T ItemNumber Container
AppearanceClarity/Color Cure Type
Viscosity, cPBrookfield,
25°CTemperature
RangeAgency
ApprovalsKey Substrates
5248™Nuva-Sil®
19987 Translucent/straw
UV, moisture 50,000 -65°F to400°F
ISO-10993compliant
Elastomer, metal, glass300 ml cartridge
713™ Prism®
Accelerator
7701™ Prism® Primer
19889
1988619887
Clear
Clear
–
–
1
3
–
–
ISO-10993compliant
ISO-10993compliant
Accelerator for cyanoacrylates
Adhesion promoter for low energy surface plastics
1.75 fl. oz. bottle
1.75 fl. oz. bottle16 fl. oz. can
LOCTITE® BRAND MEDICAL DEVICE ADHESIVES – CYANOACRYLATE
LOCTITE® BRAND NUVA-SIL® ADHESIVE – SILICONE
LOCTITE® BRAND PRISM® ACCELERATOR & PRIMER
3981™Hysol®
3982™Hysol®
3984™Hysol®
M-11FL™Hysol®
M-21HP™Hysol®
M-31CL™Hysol®
M-121HP™Hysol®
3676637297
3676737298
3676837299*
30678
30671
3067330674*
30680
Transparent yellow
Off white
Light grey
Ultra clear
Off white
Ultra clear
Amber
Heat cureepoxy
Heat cureepoxy
Heat cureepoxy
Roomtemperature
urethane
Roomtemperature
epoxy
Roomtemperature
epoxy
Roomtemperature
epoxy
5,300
8,000
25,500
3,800
37,000
6,000
11,000
-65°F to300°F
-65°F to300°
-65°F to300°F
-65°F to250°F
-65°F to300°F
-65°F to300°F
-65°F to300°F
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
ISO-10993compliant
Thermoset plastic, metal, glass, ceramic
Thermoset plastic, metal, glass, ceramic
Thermoset plastic, metal, glass, ceramic
Thermoplastic, thermoset plastic, polycarbonate, elastomer, metal,
glass, ceramic
Thermoplastic, thermoset plastic,elastomer, metal, glass, ceramic
Thermoplastic, thermoset plastic, polycarbonate, metal,
glass, ceramic
Thermoplastic, polycarbonate,polyvinylchloride, metal,
glass, ceramic
30 ml syringe1 liter bottle
30 ml syringe1 liter bottle
30 ml syringe1 liter bottle
50 ml dual cartrdg.
50 ml dual cartrdg.
50 ml dual cartrdg.200 ml dual cartrdg.
50 ml dual cartrdg.
LOCTITE® BRAND HYSOL® ADHESIVES – EPOXY AND URETHANE
* Made-to-order item.
AD
HE
SIV
ES
MA
INT
EN
AN
CE
PR
OD
UC
TS
62
Whether a liquid, foam, aerosol, or gel, you’llfind the right product for your bonding need in the extensive family of Loctite® brand adhesives.These instant, acrylic and rubber-based adhesivesprovide an endless combination of cure speed,impact resistance, strength, temperature range,and solvent resistance to meet tough on-the-jobrequirements.
ADHESIVES
Loctite® 330™
Depend® Adhesive
No MixSets in just minutes to a toughacrylic adhesive with high peel andimpact strength. Bonds almost allcombinations of materials,including glass. No mix kit includesactivator and adhesive.
Loctite® 380™ Black Max®
Instant Adhesive
ToughenedFor parts that encounter shock,vibration, or thermal cycling,Loctite® 380™ Black Max® is theinstant adhesive choice. This black,toughened cyanoacrylate adhesiveuses elastomers to withstandimpact and challengingenvironmental conditions. Seals aswell as bonds.
Loctite® 404™ Quick Set™
Instant Adhesive
This general purpose instantadhesive liquid is the one everyoneneeds in their toolbox for generalmaintenance and repair. It setsinstantly. No clamping, no mixing,no waiting. Keep it handy to bondjust about anything in an instant.
Loctite® Quicktite® InstantAdhesive Gel
A general purpose instant adhesivefeaturing an innovative, precisionflow control applicator. This new,patented, “squeeze grip” applicatorallows for pinpoint control on theexact amount and placement of theadhesive. It is also designed to beclog-free, so the adhesive is alwaysready-to-use.
Loctite® Black ContactAdhesive
A professional contact adhesive thatblends with black colored moldingsand weatherstripping materials.Withstands temperature extremesand is resistant to gasoline,kerosene, and other solvents. Fastdrying, waterproof.
Loctite® Contact Adhesive
Fast drying, neoprene-basedadhesive bonds rubber, insulation,weatherstripping, and other porousmaterials. Sets to a tack-freesurface in 3-4 minutes. Allowsrepositioning of parts after initialcontact. Withstands freezingtemperatures.
NEW
AD
HE
SIV
ES
MA
INT
EN
AN
CE
PR
OD
UC
TS
63
LOCTITE® BRAND ADHESIVES PROPERTIES CHART
Adhe
sive
Appe
aran
ce
Com
mon
Sur
face
sAd
hesi
ve W
ill B
ond
Bond
Tim
e*
ContainerItem
Number Tem
pera
ture
Resi
stan
ce
P R O D U C T
-60 to 250°F(-51 to 121°C)
-65 to 225°F(-54 to 107°C)
-65 to 180°F(-54 to 106°C)
-65 to 180°F(-54 to 106°C)
180°F
180°F
100 to 120°F(38 to 49°C)
100 to 170°F(38 to 77°C)
Amber liquid
Black liquid
Clear liquid
Clear gel
Thick yellowliquid
Thick black liquid
Clear-drying semi-translucent foam
Clear-drying semi-translucent foam
Glass, wood, metal, concrete, ceramic, rubber
Metal, plastic, rubber
Metal, plastic, rubber
Metal, plastic, rubber, cork, cardboard, leather
Weatherstripping, vinyl, rubber, wood, metal
Weatherstripping, vinyl, rubber, wood, metal
Lightweight porousand non-porousmaterials
Foam, carpet, fabrics, plasticsrubber
Agen
cyAp
prov
als
–
–
ABS, CFIA,Commercial item std. A-A-3097
–
CFIA
CFIA
–
–
Set-up - 1-2 minutes Full Strength - 24 hours
Set-up - 90-150 seconds Full Strength - 24 hours
Set-up - 20-40 seconds Full Strength - 24 hours
5-30 seconds
Let dry 3-4 min.before assembly.Sets on contact.
Let dry 3-4 min.before assembly.Sets on contact.
Let dry 15-20 min.before assembly.Sets on contact.
Let dry 15-20 min.before assembly.Sets on contact.
330™ Depend® Adhesive
380™ Black Max® Instant Adhesive
404™ Quick Set™ Instant Adhesive
Quicktite® Instant Adhesive Gel
Contact Adhesive
Black Contact Adhesive
All-Purpose Spray Adhesive
Maximum Strength Headliner Adhesive
20251
20252
3800438050
4655146548
39202
30537
30540
30544
37312
Kit - 25 ml syr. applicator25 gm aerosol activatorKit - 250 ml tube4.5 oz. aerosol activator
3 gm net wt. tube 1 oz. net wt. bottle
1/3 oz. net wt. bottle4 oz. net wt. bottle
0.14 oz. net wt. bottle
5 fl. oz. tube, box
5 fl. oz. tube, box
10.5 oz. net wt.aerosol
16.75 oz. net wt. aerosol
* Times are based on bonding steel to steel parts.
Loctite® All-Purpose Spray Adhesive
Bonds lightweight, porous, and non-porous surfaces. Allowsrepositionable and permanentbonds. Fast drying; won't shrink or bleed. Resists water andhumidity. Contains no ozone-depleting compounds.
Loctite® Maximum StrengthHeadliner Adhesive
A high strength, VOC compliantproduct designed for bonding foam,carpet, fabrics, plastics, rubber, etc.Loctite® Maximum StrengthHeadliner Adhesive is resistant toextreme weather conditions, iswater-resistant, and sprays on clear.
For technical informationand/or product availability,
call: 1-800-LOCTITE (562-8483)or visit us on the web at:
NEW
www.loctite.com
AN
TI-
SE
IZE
MA
INT
EN
AN
CE
PR
OD
UC
TS
64
Loctite® brand anti-seize compounds are agroup of premium quality products, developed toprotect metal parts from rust, corrosion, galling,and seizing. They ease assembly and disassemblyof slip-fit, press-fit, and threaded joints and reducefriction and wear on critical operating equipment.Formulated for severe industrial environments,these products protect against hightemperatures, heavy loads, chemicals, pounding,and vibration.
ANTI-SEIZE
Loctite® Silver Grade Anti-Seize
Heavy duty, temperature resistant,petroleum-based lubricant compound fortified with graphite andmetallic flake. Inert, will notevaporate or harden in extreme coldor heat. For use in assemblies up to1600°F (871°C). Tested to MIL-PRF-907E. Approved by the AmericanBureau of Shipping and CFIA.
Loctite® QuickStix™ SilverGrade Anti-Seize
New semi-solid stick offers the sameperformance characteristics as theLoctite® Silver Grade Anti-Seizepaste in a convenient semi-solidstick form. Stick package offersmore portability and less mess.Qualified to performancerequirements of MIL-PRF-907E and CFIA approved.
Loctite® C5-A® Copper Based Anti-Seize Lubricant
Exclusive formula suspends copperand graphite in a high quality grease.Protects metal parts from rust,corrosion, galling, and seizing attemperatures to 1800°F (982°C).Tested to MIL-PRF-907E.
Loctite® QuickStix™ C5-A®
Copper Anti-Seize
The same trusted performancecharacteristics as the Loctite® C5-A®
Copper Based Anti-Seize paste in a convenient semi-solid stick form. Stick package offers more portability and less mess. Qualified to performance requirements of MIL-PRF-907E and CFIA approved.
Loctite® Nickel Anti-Seize
Copper-free. Recommended forstainless steel and other metal fittings.For preventing corrosion, seizing, andgalling in harsh, chemicalenvironments, and temperatures to2400°F (1315°C). Approved by theAmerican Bureau of Shipping.
Loctite® Heavy Duty Anti-Seize
Metal-FreeExcellent lubricity. Providesoutstanding lubrication to all metalsincluding stainless steel, aluminum,and soft metals up to 2400°F(1315°C).
Loctite® Moly Paste
Metal-FreeVery low friction. Lubricates press fits,protects during break-in and underhigh static loads up to 750°F (400°C).Allows maximum clamping fromavailable torque.
NEW
NEW
AN
TI-S
EIZ
EM
AIN
TE
NA
NC
E P
RO
DU
CT
S
65
Loctite® High Performance N-5000™ High Purity Anti-Seize
Nickel-based. Maximum lubricatingand anti-seize properties for Class 1, 2 and 3 power planthardware. Temperature resistant to 2400°F (1315°C).
Loctite® N-7000™ High PurityAnti-Seize
Metal-FreeFormulation provides high levels ofpurity and excellent lubricatingproperties. For Class 1, 2 and 3power plant hardware. Temperatureresistant to 2400°F (1315°C).
Loctite® White Hi-Temp Anti-Seize
Metal-FreeA general purpose non-metallicformulation that protects againsthigh temperature seizing and gallingof mated metal parts, up to 2000°F(1093°C). White in color, it hasexcellent lubricity and can be usedon various metals such as copper,brass, cast iron, steel, and all alloysincluding stainless steel.
Loctite® Food Grade Anti-Seize
Metal-FreePrevents seizure, galling, andfriction in stainless steel and othermetal parts up to 750°F (400°C).NSF H1 approved for incidentalfood contact.
Loctite® N-1000™ High PurityAnti-Seize
Certified pure. Copper-based.Suitable for critical, long-term,stainless steel applications andhigh-nickel, alloy bolting.Recommended for protecting Class 2 and 3 power planthardware. Temperature resistant to 1800°F (982°C).
Loctite® N-5000™ High PurityAnti-Seize
Nickel-based. Lubricates and protects Class 1, 2 and 3 powerplant hardware. Recommended for highly corrosive environmentsto 2400°F (1315°C).
Loctite® Marine Grade Anti-Seize
Metal-FreeFormulated to protect assembliesexposed directly or indirectly tofresh and salt water, Loctite®
Marine Grade Anti-Seize worksespecially well in high humidityconditions. It has excellentlubricity, superior water wash-outand water spray resistance, andprevents galvanic corrosion.Protects in temperatures from -20°F to 2400°F (-29°C to 1315°C).Approved by the American Bureauof Shipping.
Loctite® Graphite-50™
Anti-Seize
Metal-FreeElectrically conductive, non-metallic. Temperature resistant upto 900°F (482°C). Highly electricallyconductive in metal-to-metal joints.
Loctite® Moly-50™ Anti-Seize
Metal-FreeGeneral purpose, thread lubricant.Temperature resistant to 750°F(400°C). Provides excellent lubricity.Meets the performancerequirements of MIL-PRF-83483.
Loctite® Zinc Anti-Seize
Protects aluminum and ferrous surfaces from seizure and corrosion up to 750°F (400°C).
AN
TI-
SE
IZE
MA
INT
EN
AN
CE
PR
OD
UC
TS
66
Torque guideProper clamp loadis an essential partof any boltedassembly fortrouble-freeoperations.Torquing either nutor bolt creates theclamp load. An anti-seize lubricant usedon a bolt helps to develop greater clampload for the same torque compared toan unlubricated bolt. An additionalbenefit is greater uniformity in clampload among a series of bolts. Therelationship between torque and clamp load is expressed in the following equation: T = KFD
Where:T = Torque (in-lb, ft-lb, N-m)F = Clamp Load (lb, N)D = Nominal diameter of bolt
(in, ft, m)K = Torque coefficient or nut
factor, determined experimentally
K Factors: K factors are obtained on Grade 8, 1⁄2" steel bolts and grade 5 nuts by a test procedure whichmeasures torque tension properties.Lubricant was applied to the boltthreads and both faces of the washer.
See the Properties Chart for the torquecoefficient or K value for the anti-seizecompounds.
Henkel Corporation believes that thisdata fairly represents performance tobe expected. However, Henkel makesno warranty of specific performance onany individual fastener. In criticalapplications, it is necessary todetermine K values independently.
Note: There are two “coefficients” used to express the relationship between torque and tension: torquecoefficient (also called “nut factor”) is the mostcommonly used. A different concept is the “frictioncoefficient,” which has value 2/3 (or 67%) of thetorque coefficient.
Colo
r
LOCTITE® BRAND ANTI-SEIZE PROPERTIES CHART
Tem
pera
ture
Resi
stan
ce
K V
alue
ItemNumber Container
512995127751001510025114451147396475100551003510045100651007396435100851009385845101151146
3722939222
38181802097673276759767648020676775
3723039223
771245128651102771645115277175
51094
39901
51084
516095160551606516073635451608
3439534026
51050510485104951145
511685117051171
3451734518
511155111651117
5134651243512695124651245
51572
512725127051273
2 gm pouch7 gm pouch1 oz. tube4 oz. tube4 oz. brush-top can8 oz. brush-top can8 oz. brush-top metal can10 oz. brush-top can12 oz. aerosol13 oz. cartridge1 lb. can1 lb. brush-top can1 lb. brush-top metal can2.5 lb. can8 lb. can25 lb. pail42 lb. pail425 lb. drum
20 gm stick40 gm stick
7 gm pouch4 oz. brush-top can8 oz. brush-top can12 oz. aerosol1 lb. brush-top can1 gal. can5 gal. pail
20 gm stick40 gm stick
8 oz. brush-top can12 oz. aerosol1 lb. can1 lb. brush-top can8 lb. can5 gal. pail
1 lb. can
1 lb. can
1 lb. can
1 oz. tube9 oz. brush-top can1.2 lb. brush-top can2.3 lb. can8 lb. can45 lb. pail
8 oz. brush-top can16 oz. brush-top can
12 oz. aerosol8 oz. brush-top can1 lb. brush-top can15 lb. can
8 oz. brush-top can2 lb. can40 lb. pail
8 oz. brush-top can16 oz. brush-top can
8 oz. brush-top can1 lb. can2 lb. can
1 oz. tube8 oz. brush-top can1 lb. brush-top can2 lb. can8 lb. can
1 lb. brush-top can
8 oz. brush-top can1 lb. brush-top can2 lb. can
Copper
Copper
Silver
Silver
Silver
Black
Grey
Black
Black
Black
Black
White
White
Copper
Silver
Silver
Silver
1800°F(982°C)
1800°F(982°C)
1600°F(871°C)
1600°F(871°C)
2400°F(1315°C)
750°F(400°C)
750°F(400°C)
900°F(482°C)
2400°F(1315°C)
2400°F(1315°C)
750°F(400°C)
750°F(400°C)
2000°F(1093°C)
1800°F(982°C)
2400°F(1315°C)
2400°F(1315°C)
2400°F(1315°C)
0.16
0.16
0.18
0.18
0.13
0.13
0.15
0.13
0.16
0.18
0.11
0.13
0.16
0.17
0.15
0.15
0.16
P R O D U C T
C5-A CopperBased Anti-SeizeLubricant
QuickStix™C5-A® CopperAnti-Seize
Silver GradeAnti-Seize
QuickStix™Silver GradeAnti-Seize
Nickel Anti-Seize
Moly-50™ Anti-Seize
Zinc Anti-Seize
Graphite-50™ Anti-Seize
Heavy DutyAnti-Seize
Marine GradeAnti-Seize
Moly Paste
Food Grade Anti-Seize
White Hi-TempAnti-Seize
N-1000™ High Purity Anti-Seize
N-5000™ HighPurity Anti-Seize
High Performance N-5000™ HighPurity Anti-Seize
N-7000™ HighPurity Anti-Seize
®
NEW
NEW
AN
TI-S
EIZ
EM
AIN
TE
NA
NC
E P
RO
DU
CT
S
67
LOCTITE® BRAND ANTI-SEIZEAPPLICATION SELECTION GUIDE
Max
imum
Ant
i-Sei
zePr
oper
ties
Gen
eral
Pur
pose
Anti-
Seiz
e
P R O D U C T
C5-A® Copper Based Anti-Seize Lubricant
Silver Grade Anti-Seize
Nickel Anti-Seize
Moly-50™ Anti-Seize
Zinc Anti-Seize
Graphite-50™ Anti-Seize
Heavy DutyAnti-Seize
Marine GradeAnti-Seize
Moly Paste
Food Grade Anti-Seize
White Hi-TempAnti-Seize
N-1000™ High Purity Anti-Seize
N-5000™ HighPurity Anti-Seize
High Performance N-5000™ High Purity Anti-Seize
N-7000™ High Purity Anti-Seize
Extr
eme
High
Te
mpe
ratu
re R
esis
tanc
e (to
200
0°F–
2400
°F)
High
Tem
pera
ture
Resi
stan
ce
(to 1
600°
F–18
00°F
)
Extr
eme
Chem
ical
Re
sist
ance
For M
axim
um L
ubric
ity
Elec
tric
ally
Con
duct
ive
For A
lum
inum
/Sof
t Met
als
For S
tain
less
Ste
el
Copp
er-F
ree
Form
ulat
ion
For L
ow S
peed
s,
High
Loa
ds
High
Pur
ity
Met
al-F
ree
Wat
er A
pplic
atio
nsPreferred Choice Good Choice Acceptable Choice
Loctite® brand Metal-FreeAnti-Seize products
AN
TI-
SLI
P C
OA
TIN
GS
MA
INT
EN
AN
CE
PR
OD
UC
TS
68
Loctite® brand Big FootTM Epoxy FlooringProducts provide tough, long-lasting anti-skidsurfaces for added safety. Easily applied topotentially hazardous surfaces, Loctite® brand Big FootTM coatings stand up to heavy traffic and harsh environments.
ANTI-SLIP COATINGS
Loctite® Big Foot™ Heavy DutyPedestrian Grade
For areas with heavy pedestrian orlight rolling traffic. Ideal for ramps,walkways, locker rooms, stairs, andassembly areas.
Loctite® Big Foot™
Acrylic Pedestrian Grade
A single-component, elastomeric,anti-slip floor and deck coating for optimum adhesion to asphaltand flexible applications.
Loctite® Big Foot™
Vehicular Grade
Withstands even the heaviest rollingequipment traffic. Resists liquids asharsh as jet fuels and hydraulic fluids.Superior adhesion forms a solid bondto metal, concrete, and wood.
Loctite® Big Foot™
Metal Primer
Two-component, epoxy-polyimideprimer increases adhesion betweenall Loctite® Big Foot™ anti-slipcoatings and metal surfaces.
Loctite® Big Foot™ Zero V.O.C.
This 100% reactive, solvent-freeepoxy has the most aggressive profile in the Loctite® Big Foot™line. Use in odor-sensitive areassuch as wineries, food processingplants, hospitals, or for confined spaces.
Loctite® Big Foot™
Acrylic Primer
A single-component, clear, zeroV.O.C., water-based primer designedfor use with Loctite® Big Foot™Acrylic Pedestrian Grade and GlowCoat Anti-Slip Coatings.
Loctite® Big Foot™
Water Based Primer/Sealer
Specially formulated to increaseadhesion and coverage of all Loctite®
Big Foot™ Anti-Slip Coatings exceptLoctite® Big Foot™ Acrylic PedestrianGrade. For use on concrete, wood,tile, and other porous substrates.
AN
TI-S
LIP C
OA
TIN
GS
MA
INT
EN
AN
CE
PR
OD
UC
TS
69
Big Foot™ Heavy DutyPedestrian Grade
Big Foot™ AcrylicPedestrian Grade
Big Foot™ VehicularGrade
Big Foot™ Zero V.O.C.
50 ft2
per gallon
70 ft2
40 ft2
per gallon
35 ft2 per gallon
250 ft2
250 ft2
320 ft2
Big Foot™ Heavy DutyPedestrian Grade
Big Foot™ Acrylic Pedestrian Grade
Big Foot™ VehicularGrade
Big Foot™ Zero V.O.C.
Big Foot™ Metal Primer
Big Foot™ Acrylic Primer
Big Foot™ Water Based Primer/Sealer
962119626196265
95591
962219625196255
39915
96132
95581
94142
1 gal. can1 gal. can5 gal. pail
1 gal. pail
1 gal. kit1 gal. kit5 gal. kit
1 gal. kit
1 gal. kit
1 gal. pail
1 gal. kit
BlackGreyGrey
Grey
BlackGreyGrey
Grey
Grey
Clear
Clear
140
140
140
140
140
140
140
N/A
N/A
120
60
240
N/A
120
12/72
4/24
12/72
24/72
12
1-2
3-6
Asph
alt
Preferred choice Good choice
Met
al
Wea
ther
Re
sist
ant
Wat
er-B
ased
Flex
ible
Coat
ing
Woo
d
Conc
rete
Anti-
slip
Pede
stria
n
Anti-
Slip
Zero
V.O
.C.
Anti-
Slip
Vehi
cula
r
LOCTITE® BRAND BIG FOOT™ ANTI-SLIP COATINGS APPLICATIONSELECTION GUIDE
P R O D U C T Chem
ical
Res
ista
nt
LOCTITE® BRAND BIG FOOT™ ANTI-SLIP COATINGS PROPERTIES CHART
Cov
erag
e
Col
or
Max
imum
Tem
pera
ture
, °F
Wor
king
Tim
e,M
inut
es
Func
tiona
l Cur
e,H
ours
*
CFIA
CFIA
CFIA
CFIA
–
–
–
Agen
cyAp
prov
als
ContainerItem
NumberP R O D U C T
LOCTITE® BRAND BIG FOOT™ ACCESSORIES SELECTION GUIDE
QuantityItem
NumberP R O D U C T
Phenolic Rollers
Bristle Rollers
Mixer Blades
96121
96153
96131
4/case
2/case
1/case
For use with Loctite® Big Foot™ Heavy Duty, Vehicular and Zero V.O.C. Grades
For use with Loctite® Big Foot™, Acrylic Pedestrian Grade, Acrylic Primer, Metal Primer and Water Based Primer/Sealer
For use with all Loctite® Big Foot™ Coatings(1 gallon kits only)
*Cure time is for light pedestrian/heavy pedestrian traffic. Values are temperature and thickness specific.
BE
LT R
EPA
IR/U
RE
TH
AN
ES
MA
INT
EN
AN
CE
PR
OD
UC
TS
70
P R O D U C T Colo
r
LOCTITE® BRANDACCESSORIESCHART
Cove
rage
Item Number Co
ntai
ner
Flex™ Metal PrimerPromotes adhesion to metal parts
98471 3.3 fl. oz.can
Clear
Etching AgentEnhances bonds to rubber
99626 3 fl. oz.bottle
Clear
Flex™ AcceleratorSpeeds the cure ofFlex™ urethanes
97273 3.5 fl. oz. can
Clear
Flex™ CleanerCleans and primessurfaces
39636 4 fl. oz.can
N/A Clear
Approx.1 can
of each
productfor
2 lbs.of
urethane
Loctite® brand Fixmaster® Belt RepairProducts are tough urethanes designed torepair conveyor belts and other damaged rubberequipment quickly and easily. Durable, flexiblerepairs can be performed using formulas fortemporary or lasting wear.
Fixmaster® urethanes are two-component,repair materials that can be troweled, cast, orbrush-applied to rebuild or protect critical operating equipment. Tough, rubber-like properties provide protection from impact, abrasion, and corrosion. Fixmaster® urethanesare non-shrinking and unaffected by oil, grease,and water. Use of the recommended accessoryproducts ensures maximum adhesion and product reliability.
BELT REPAIR/URETHANES
Loctite® Fixmaster® RapidRubber Repair
UrethaneOur premium quality, belt repairproduct is designed to repairconveyor belts and other damagedrubber equipment quickly andeasily. Repairs will have the samedurability and flexibility as the belt.The 400 ml cartridge requires theuse of a Loctite® Rapid RubberRepair Dispenser. The 400 ml kitcontains a 400 ml cartridge,etching agent, cleaner, brushes,and plastic trowels.
Loctite® Fixmaster®
Instant Belt Repair
A single-component, heat-curingmaterial for fast, temporary beltrepairs. Requires no priming.Equipment can be operated in 30 minutes.
Loctite® Fixmaster® Flex™
Conveyor Belt Repair Kit
Makes long lasting belt repairs.Recommended for applicationswhere speed of application is notcritical. Cures in 8-12 hours. Kitincludes resin, hardener, cleaner,etching agent, brushes, and plastic trowels.
Loctite® Fixmaster®
Flex 80™ Putty
A trowelable, two-part urethane forrebuilding and repairing rubberparts and linings, providing impact,abrasion, and corrosion-resistantprotection.
Loctite® Fixmaster®
Flex 80™ Liquid
A castable, two-part urethane formaking molds, fixtures, expansionjoints, and non-scratching holding fixtures.
BE
LT R
EPA
IR/U
RE
TH
AN
ES
MA
INT
EN
AN
CE
PR
OD
UC
TS
71
Fixmaster® RapidRubber Repair
Fixmaster® Instant Belt Repair
Fixmaster® Flex™ Conveyor BeltRepair Kit
Fixmaster® Flex 80™ Liquid
Fixmaster® Flex 80™ Putty
Fixmaster® Rapid Rubber Repair Dispenser
Fixmaster® Rapid Rubber Repair Static Mixers
Col
or
LOCTITE® BRAND FIXMASTER® BELT REPAIR/URETHANEPROPERTIES CHART
Cov
erag
e, in
.2 @
1/4
" Th
ickn
ess
Max
imum
O
pera
ting
Tem
pera
ture
, °F
Adhe
sive
Ten
sile
Stre
ngth
, psi
% E
long
atio
n
Har
dnes
s (S
hore
A)
Wor
king
Tim
e,
Min
utes
Func
tiona
l C
ure,
Hou
rs
ItemNumber Container
966779667596676
37719
98693
9741397412
9742397422
39635
39633
400 ml kit400 ml cartridge150 ml coaxialcartridge
1 lb.
1 lb. kit
1 lb. kit6 lb. kit
1 lb. kit6 lb. kit
Required for use with 400 ml Loctite® Fixmaster® Rapid Rubber Repair (39635 is not included in the 96677 kit and must be ordered separately.)
Packaged 6/bag - for mixing and dispensing Loctite® Fixmaster® Rapid Rubber Repair in 400 ml cartridge
Black
Yellow
Black
Black
Black
88
33
115
94
27 in.3
162 in.3
94564
180
150
180
180
180
1,300
400
1,500
1,800
1,500
360
650
350
350
350
82
65
87
87
87
1
N/A
10
20
10
2
30min.
8
8
8
1:1
N/A
100:40
100:13.3
100:40
N/A
N/A
72:28
77:23
72:28
Mix
Rat
ioby
Vol
ume,
r :
h
Mix
Rat
io
by W
eigh
t, r
: h
–
–
–
–
ABS
Agen
cyAp
prov
als
Properties based on mixing one lb. unit at 77°F, 7 days cure.
Fixmaster® Rapid Rubber Repair
Fixmaster® Instant Belt Repair
Fixmaster® Flex™ Conveyor Belt Repair Kit
Fixmaster® Flex 80™ Liquid
Fixmaster® Flex 80™ Putty
Cas
ting
Mol
ds,
Fixt
ures
, Pa
rts
LOCTITE® BRAND FIXMASTER® BELT REPAIR/URETHANEAPPLICATIONSELECTION GUIDE
Con
veyo
r Be
lt Re
pair
: Lo
ng T
erm
Con
veyo
r Be
lt Re
pair
: Te
mpo
rary
Coa
ting
Impe
llers
,Fe
eder
Bow
ls
Chu
tes,
H
oppe
rs,
Def
lect
ion
Plat
es
Rebu
ildin
g Ru
bber
Par
ts
Lini
ng
Pum
ps
Form
ing
Expa
nsio
n Jo
ints
Preferred Choice Good Choice
P R O D U C T
P R O D U C T
CLE
AN
ER
SM
AIN
TE
NA
NC
E P
RO
DU
CT
S
72
The Loctite® brand offers a complete line ofhighly effective general purpose or application-specific cleaners and degreasers. Included areboth aqueous and solvent-based products, all of which are free of Class I ozone-depletingchemicals (ODCs).
CLEANERS
Loctite® Non-Chlorinated Parts Cleaner
Penetrates, dissolves, and removesdirt and oil from metal parts. Leavesno residue. Does not contain 1,1,1-trichloroethane; helps manage EPAhalide limits.
Loctite® Pro StrengthDegreaser
Quickly dissolves and removesgrease, oil, and dirt from iron, steel,aluminum, magnesium, copper, rubber, plastic, and concrete. Rinsesoff with water.
Loctite® Pro Strength Parts Cleaner
Aggressively penetrates, dissolves,and removes oil and grease fromparts. Dries quickly with no residue.Contains no ozone-depleting chemicals (ODCs).
Loctite® Natural Blue®
Biodegradable Cleaner & Degreaser
All purpose, industrial strength,concentrated cleaner and degreaser.Can be economically diluted withwater. Natural Blue is formulated forwipe down, pressure spraying, andimmersion cleaning processes – atroom temperature or heated. Pine-scented, non-flammable and non-toxic. Contains no ozone-depletingchemicals (ODCs).
Loctite® Natural Blue®
Biodegradable Cleaner & Degreaser
Fragrance-FreeSame product as Loctite®
Natural Blue® Biodegradable Cleaner& Degreaser but without thefragrance. It can be used in alldepartments of a food processingplant. Contains no ozone-depletingchemicals (ODCs).
Loctite® ODC-Free Cleaner &Degreaser (Naphtha)
A non-aqueous, hydrocarbon-basedsolvent designed for cleaning anddegreasing surfaces to be bondedwith adhesives, as well as for generalpurpose industrial cleaning. Safe on aluminum, rubber, and most plastics,and will not cause flash rusting on water sensitive parts. Dries residuefree. Contains no ozone-depletingcompounds. (Formerly referenced as 7070.) NSF K1 approved.
Loctite® Aqua Power®
Biodegradable Cleaner & Degreaser
Penetrates, dissolves, and removesdirt and oil. Fast drying and residue-free. Environmentally friendly product is biodegradable, has lowtoxicity, contains no ozone-depleting chemicals (ODCs), and is non-corrosive/non-caustic.
CLE
AN
ER
SM
AIN
TE
NA
NC
E P
RO
DU
CT
S
73
Loctite® Multi-Purpose Glass Cleaner
Fast-acting, professional strengthcleaner removes tough grease anddirt from glass, chrome, aluminum,stainless steel, and enamel finishes.Orange-scented formula will not runor streak. Contains no ozone-depleting chemicals (ODCs).
Loctite® Electrical Contact Cleaner
Non-FlammableRemoves grease, oil, and other contaminants from electrical parts to prevent contact failure. Driesresidue-free in seconds. Non-conductive, non-corrosive, non-flammable. Contains no CFCs orClass I ODCs. Contains HCFC-141b. May attack some sensitive plastics.
Loctite® Industrial StrengthPaint Stripper
Quickly strips and removes paint.Eliminates sanding and scraping.Works in 10-15 minutes attemperatures from -40°F to 100°F.Contains no ozone-depletingchemicals (ODCs).
Loctite® Chisel® GasketRemover (Methylene Chloride)
Removes gaskets from any type of assembly in 10 to 15 minutes.Prepares metal parts for new gaskets, eliminating scraping and sanding. Works on wood; non-corrosive on aluminum. Not for use on plastics, linoleum, or synthetic fibers.
Loctite® Chisel® MC-Free Gasket Remover
Free of Methylene Chloride, Loctite®
Chisel® MC-Free Gasket Removerhas a foaming action that lifts offgaskets from any type of assemblyin minutes. Performs better thanMethylene Chloride formulations onsilicone gaskets and removes mostspray paints from steel panels inless than 30 seconds. Convenientspray liquid penetrates and cleansintricate shapes and will not run off,even on vertical surfaces. Suitablefor wood and plaster. Not for use onplastics, linoleum, or synthetic fibers.
Loctite® Electrical Contact & Parts Cleaner
Fast-evaporating cleaner removesgrease, oil, and other contaminantsfrom electrical parts and mechanicalequipment. Contains no CFCs orHCFCs and is safe on most plastics.Non-conductive, non-corrosive.
Loctite® Non-FlammableElectrical Contact Cleaner
Used as an electrical contact cleanerto remove grease, dirt, oil, and othersurface contaminants from sensitiveelectrical/electronic parts. Non-flammable, fast evaporating andleaves no residue. Contains noHCFCs or CFCs.
Loctite® Pro Strength Varnish Remover
Super jet spray quickly cuts andremoves grease, gum, and varnishfrom chokes, baffle plates, and carburetor linkage. Improves performance and fuel efficiency.
Loctite® Industrial Hand Wipes
Pre-moistened with a powerfulcitrus-scented cleaning formula thatis abrasive enough to scrub off thetoughest grease and grime. Quickand easy-to-use, these 9.5" x 12"towels eliminate rinsing and dryingand leave no residue behind. Perfect for industrial andcommercial environments in thepainting, printing, maintenance,transportation, and constructionindustries.
NEW
CLE
AN
ER
SM
AIN
TE
NA
NC
E P
RO
DU
CT
S
74
LOCTITE® BRAND CLEANER PRODUCTS APPLICATION CHART
Function
Natural Blue®
Biodegradable Cleaner& Degreaser
Natural Blue® Biodegradable Cleaner & Degreaser (Fragrance-Free)
Aqua Power® Biodegradable Cleaner & Degreaser
ODC-Free Cleaner & Degreaser
Non-Chlorinated Parts Cleaner
Pro Strength Degreaser
Pro Strength Parts Cleaner
Pro StrengthVarnish Remover
Electrical Contact &Parts Cleaner
Multi-Purpose Glass Cleaner
Electrical Contact Cleaner
Non-Flammable Electrical Contact Cleaner
Industrial Strength Paint Stripper
Chisel® Gasket Remover
Chisel® MC-Free Gasket Remover
Industrial Hand Wipes
Removes grease, grime, oil, soot, cutting fluids, mildew, stains, light carbon, animal fat, polishing compounds, and ink.
Removes grease, grime, oil, soot, cutting fluids, mildew, stains, light carbon, animal fat, polishing compounds, and ink, without added fragrance.
Biodegradable cleaner for removing oil, grease, and asphalt.
Removes grease, oil, lubrication fluids, metal cuttings and filings from parts, equipment, and machinery.
Cleaner for removing oil, grease, and asphalt with no chlorinated solvent run-off.
Self-emulsifying degreaser that quickly cuts and removes grease, oil, and dirt, as well as inhibiting rust and corrosion.
Removes oil, grease, brake fluids, oxidized oils (gum), and asphalt. Penetrates through dirt and corrosion and flushes them away.
Dissolves and cleans residue deposited during normal operation of gasoline engine powered equipment.
Removes grease, dirt, oil, flux, and surface contaminants from sensitive electrical/electronic devices. Also used for equipment requiring non-conductive, low residue degreasing agents.
Deodorizes and cleans window film.
Removes grease, dirt, oil, flux, and surface contaminants from sensitive electrical/electronic devices. Also used for equipment requiring non-conductive, low residue degreasing agents. Contains HCFC-141b. Non-flammable.
Removes grease, dirt, oil, and flux from sensitive electrical/electronic devices.
Removes paint, varnish, and glues from metal, wood, and plaster.
Removes pre-cut conventional gasket cements as well as formed-in-place chemical gaskets.
Removes pre-cut conventional gasket cements as well as formed-in-place chemical gaskets.
Removes grease, grime, oil, soot, paints, and ink.
Cleans engine parts, ovens, exhaust hoods, drilling rigs. Can be diluted for general wipe down cleaning. Formulated for pressure spraying and immersion cleaning processes, at room temperature or heated.
Exhaust hoods, machinery, tanks, motors, concrete floors, asphalt, walls, floors, carpets, valves, equipment, vehicles, compressors, exterior siding, engines, bearings.
All-purpose metal parts cleaner.
Use as a spray or in immersion cleaning processes, at room temperature or heated. Recommended as a final pre-assembly cleaning treatment for all surfaces bonded with adhesives.
All-purpose metal parts cleaner. Ideal for aluminum surfaces.
Cleaning and degreasing industrial and farm equipment, lawn mowers, garage floors, tools.
All-purpose metal parts cleaner.
Carburetors, chokes, linkages, heat risers, PCV valves, metal parts, industrial equipment.
Switches, relays, motor controls, pc boards, connectors, tape heads, sensors, control panels, electrically driven equipment, general parts degreasing.
Glass, chrome, aluminum, stainless steel and enamel finishes, plastics.
Switches, relays, motor controls, pc boards, connectors, tape heads, sensors, control panels, electrically driven equipment.
Cleans motorized instruments, control panels, electrically driven equipment, motors and other electronic devices.
Cleaning paint spills, removing various types of paint, contact cements, glues, floor lines, decals, and labels.
Removing silicones, baked-on gaskets, gaskets from aluminum and small, difficult-to-reach components, weatherstrip adhesive, dried oil, grease, paint, varnish.
Removing silicones, baked-on gaskets, gaskets from aluminum and small, difficult-to-reach components, weatherstrip adhesive, dried oil, grease, paint, varnish.
Removes grease, grime, oil, soot, paints, and ink from surfaces. Removes grease and grime from hands.
ApplicationP R O D U C T
NEW
CLE
AN
ER
SM
AIN
TE
NA
NC
E P
RO
DU
CT
S
75
LOCTITE® BRAND CLEANER PRODUCTS PROPERTIES CHART
Residue/Rinsibility Odor
Natural Blue® Biodegradable Cleaner& Degreaser
Natural Blue® Biodegradable Cleaner & Degreaser(Fragrance-Free)
Aqua Power® Biodegradable Cleaner & Degreaser
ODC-Free Cleaner & Degreaser
Non-Chlorinated Parts Cleaner
Pro Strength Degreaser
Pro Strength Parts Cleaner
Pro StrengthVarnish Remover
Electrical Contact &Parts Cleaner
Multi-Purpose Glass Cleaner
Electrical Contact Cleaner
Non-Flammable Electrical Contact Cleaner
Industrial Strength Paint Stripper
Chisel® Gasket Remover
Chisel® MC-Free Gasket Remover
Industrial Hand Wipes
822448224982251822538225482255
2381120279
30565
223552016220260
30545
30521
30548
30529
25791
30546
24379
36646
81716
79040
34663
3494334944
4 fl. oz. bottle24 fl. oz. spray bottle1 gal. bottle 5 gal. pail15 gal. pail55 gal. drum
1 gal. bottle55 gal. drum
17 oz. net wt. aerosol
15 oz. net wt. aerosol16 fl. oz. pump spray1 gal. can
14.75 oz. net wt.aerosol
15 oz. net wt. aerosol
19 oz. net wt. aerosol
12 oz. net wt. aerosol
11 oz. net wt. aerosol
18.75 oz. net wt.aerosol
15 oz. net wt. aerosol
14 oz. net wt. aerosol
18 oz. net wt. aerosol
18 oz. net wt. aerosol
15.25 oz. net wt. aerosol
75 count canister130 count bucket
Rinses residue-free with water
Rinses residue-free with water
No rinse andno residue
No rinse andno residue
No rinse andno residue
Rinses clean
No rinse andno residue
No rinse andno residue
No rinse andno residue
No residue,wipes clean
No rinse andno residue
No rinse andno residue
Rinses residue-free with water
Waxy residue
Oily residue
No rinse andno residue
Pine scent
Fragrance-free
Mild solvent
Mild citrus
Mild solvent
Mild solvent
Mild solvent
Aromatic
Mild solvent
Orange scent
Mild solvent
Solvent
Acrid
Mild solvent
Solvent
Mild citrus
Equivalent to theevaporation rate of water. Wiping or blowers will accelerate dry time.
Equivalent to theevaporation rate of water. Wiping or blowers will accelerate dry time.
5-15 minutes
5-20 minutes(without wipe)1-2 minutes(with wipe)
5-15 minutes
Leave on surface10 minutes
5-15 minutes
5 minutes
<30 seconds
Wipes dry
<30 seconds
<30 seconds
10 minutes
Leave on surface 10-15 minutes.Wipe/scrape clean
Leave on surface 5-10 minutes.Wipe/scrape clean
1-5 minutes
ContainerItem
NumberDryingTimeP R O D U C T
NEW
CO
AT
ING
SM
AIN
TE
NA
NC
E P
RO
DU
CT
S
76
Henkel offers a variety of Loctite® brandcoatings to protect, seal, insulate, preventcorrosion, color code, and add gripping power.Many products provide excellent resistance toacids, alkalis, salt and moisture that can damageequipment.
COATINGS
Loctite® Maxi-Coat™
Heavy duty coating provides long-term protection for metal parts, equipment, and machinery. Forms aprotective, waxy film which seals outmoisture, air, acid, and other corrosiveelements. Great for protecting parts instorage. Removable.
Loctite® Cold Galvanizing Compound
Sprays on metal surfaces to preventcorrosion even when surface isscratched. Ideal touch-up for weldedseams. Highly resistant to salt corrosion and water. Not resistant toacid or alkaline solutions. Containsno ozone-depleting compounds.
Loctite® Color Guard®
Tough Rubber CoatingInhibits rust and corrosion; seals,insulates, and identifies almost anymaterial in minutes. Creates a non-slip gripping surface. Rubbercoating won't crack or chip. Acidand alkali resistant. Lasts for years.Use to 200°F. Dip, spray, or brushto apply. Suggested applicationsinclude: tools, metal, electrical connections, masonry, wood, conveyors, glass, rope, fabric. Nowtoluene-free.
Loctite® Belt Dressing & Conditioner
Extends belt life. Penetrates the cord fibers of “V” belts torestore pliability and flexibility.Prevents belt slippage due to heat,cold, dampness, and dust.Eliminates squeaking and glazing.
Loctite® Extend®
Rust Treatment
One-step rust treatment goes onwhite and converts rust to a durable,black, metal-protective coating in 10minutes. Wirebrush parts and applywith brush or spray. Surface rustmust be present. Use as a primer orfinish coat. Resists temperatures to250°F intermittent, 200°F continuous.
Loctite® Heavy-DutyRubberized Undercoating
This undercoating seals, protects,and insulates. Rubberized formaximum durability.
CO
AT
ING
SM
AIN
TE
NA
NC
E P
RO
DU
CT
S
77
LOCTITE® BRAND COATINGS PROPERTIES CHART
Coa
ting
Thic
knes
s
Tem
pera
ture
Res
ista
nce
Moi
stur
eR
esis
tanc
e
Salt
Spra
yTe
st
Acce
lera
ted
Wea
ther
Tes
t
Dry
Tim
e
Color Guard®
Primer for Color Guard®
Thinner for Color Guard®
34894349793498034981*34895349823498334984*34896349853498634987*34897349883498934991*
34994
34995
11 oz. aerosol14.5 fl. oz. can1 gal. can54 gal. drum11 oz. aerosol14.5 fl. oz. can1 gal. can54 gal. drum11 oz. aerosol14.5 fl. oz. can1 gal. can54 gal. drum11 oz. aerosol14.5 fl. oz. can1 gal. can54 gal. drum
1 gal. can
1 gal. can
1 dip: 8-10 mil
1 Spray:3-5 mil
.5-1 mil
–
4 hours (allow 30 minutesbetweencoats)
10-15minutes
–
Agen
cyAp
prov
als
Agen
cyAp
prov
als
CFIA
–
–
-30°F to
200°F
–
–
Excellent/ASTM E-96
–
–
Passed 1000 hours/ASTM B-117
–
–
10 years withslight loss of thickness/ASTM G-53-84
–
–
BlackBlackBlackBlackBlue BlueBlue BlueRedRedRedRedYellowYellowYellowYellow
Grey
–
ContainerItem
Number Coa
ting
Appe
aran
ce
P R O D U C T
LOCTITE® BRAND COATINGS PROPERTIES CHART
Belt Dressing & Conditioner
Extend® RustTreatment
Heavy-Duty Rubberized Undercoating
Maxi-Coat™
Cold GalvanizingCompound
30527
30539754307544875465
30538
5121151213
82039
12 oz. net wt. aerosol
10.25 oz. net wt. aerosol1 qt. bottle1 gal. bottle5 gal. pail
16 oz. net wt. aerosol
12 oz. net wt. aerosol1 gal. can
15 oz. net wt. aerosol
N/A
30 minutesto touch
20 minutesto touch
N/A
15 minutesto touch
Up to 200°F(93°C)
Up to 250°F(121°C)
Up to 200°F(93°C)
Up to 200°F(93°C)
Up to 400°Fcontinuous;600°F intermittent
CFIA
ABS, CFIA
–
–
CFIA
White
Converts from awhite liquid to a black coating
Brown to black film
Brown
Low gloss grey
ContainerItem
NumberP R O D U C T Tem
pera
ture
Res
ista
nce
Dry
Tim
e
Coa
ting
Appe
aran
ce
* Made-to-order item. May require 6 week lead time.
EP
OX
IES
MA
INT
EN
AN
CE
PR
OD
UC
TS
78
Loctite® brand Fixmaster® Filled and GeneralPurpose Epoxies repair, rebuild, and restoredamaged parts to quickly return equipment toservice. Cured epoxies can be drilled, tapped,and machined – just like the original metal.These non-shrinking products are available in arange of performance characteristics forspecific applications. Each epoxy is capable ofbonding to metal, ceramic, wood, glass, andsome plastics.
EPOXIES
Loctite® Fixmaster®
Fast Cure Epoxy
Mixer CupsPremeasured epoxy mixer cups.Bonds in 5-15 minutes. Excellentchemical resistance. Fills porositiesand can be used to build up wornparts. Ideal for bonding glass, hardplastics, rubber, and metal.
Loctite® Fixmaster®
General Purpose Epoxy
Mixer CupsPremeasured epoxy mixer cups. Onehour working time. Fills porositiesand can be used to build up wornparts. Ideal for bonding glass, hardplastics, rubber, and metal.
Loctite® Fixmaster®
Underwater Repair Epoxy
This putty-like material is ideal forplumbing, irrigation, and marineapplications because it is unaffectedby chlorinated or salt water. It is handkneadable and fully cures in 1 hour.
FIXMASTER® EPOXIES
Loctite® Fixmaster®
4 Minute Epoxy
Translucent, gel-like adhesive. Setsup in 4-6 minutes. Temperatureresistant up to 160°F. Ideal for emergency repairs or where reducedfixturing time is desirable. Cartridgerequires manual cartridge dispensergun (Item number 983531).
Loctite® Fixmaster®
Poxy Pak™
Fast Cure EpoxyThis fast cure, high strength, thickliquid reaches handling strength in 4-6 minutes. Bonds virtually anymaterial to repair, fill, and seal holes,cracks, and worn surfaces.
Loctite® Fixmaster®
High Performance Epoxy
Fiberglass reinforcement gives thisadhesive outstanding tensile, shearstrength, and shock resistance up to180°F. Recommended for forming permanent, water-resistant bonds in production and maintenance applications. Cartridge requiresmanual cartridge dispenser gun.
Loctite® Fixmaster® ConcreteRepair EpoxyEnables permanent repairs toconcrete and masonry. Convenientstick contains pre-measuredportions of activator and base. Oncecured can be tapped, drilled,screwed, sawed, filed or painted,and will have an appearance andtexture similar to concrete.
NEW
EP
OX
IES
MA
INT
EN
AN
CE
PR
OD
UC
TS
79
FIXMASTER® METAL FILLED EPOXIES
Loctite® Fixmaster®
Fast Set Steel EpoxySteel filled. Reaches functional curein 10 minutes. Temperature resistantup to 200°F. Recommended forrepairing pipes and other equipmentthat must be back in service inminutes. Cartridge requires manualcartridge dispenser gun.
Loctite® Fixmaster®
Static MixersMixing nozzles for use withFixmaster® 50 ml epoxy cartridges.(Not for use with Rapid Rubber Repair).
Loctite® Fixmaster®
Aluminum LiquidTwo-part, pourable epoxy systemheavily reinforced with aluminumpowder. For casting and repairing of aluminum parts, and for makingmolds and fixtures.
Loctite® Fixmaster®
Aluminum PuttyAluminum filled epoxy rebuilds andrepairs aluminum equipment,forming a non-rusting finish.
Loctite® Fixmaster®
Fast Set Steel PuttySteel filled, non-sagging epoxy for filling and repairing damagedmetal parts quickly. Functional cure in about 10 minutes.
Loctite® Fixmaster®
Metal Magic SteelTM
Steel epoxy in stick form. Cut off asection, knead, and apply to leakingpipes or damaged equipment. Curesin 10 minutes. Certified andapproved for use with drinkingwater system components.
Loctite® Fixmaster®
Stainless Steel PuttyStainless steel filled. Forms a non-rusting, very hard, durable finish ondamaged stainless steel surfaces.
Loctite® Fixmaster®
Steel LiquidSteel filled. Pourable and self-leveling. Epoxy is recommended for casting into hard-to-reach areas,anchoring and leveling, and formingmolds and fixtures.
Loctite® Fixmaster®
Steel PuttySteel filled, non-sagging, two-partepoxy that cures to a metal-likefinish for rebuilding or repairingmetal parts.
Loctite® Fixmaster®
Superior MetalIdeal for renewing or protecting surfaces subject to corrosion, abrasion, and harsh environments.Ferro-silicon-filled epoxy has outstanding compressive strength,chemical resistance. Non-rusting.
Loctite® Fixmaster®
Wear Resistant PuttyCeramic fibers give this trowelableputty excellent wear and abrasionresistant properties. Cures tosmooth, low friction surface. For surfaces exposed to wear, erosion,and cavitation. Non-rusting.
Loctite® Fixmaster®
Wet Surface Repair PuttyUse this unique, trowelable epoxy torepair and rebuild wet, evenunderwater, surfaces. Bonds towood, concrete, steel, iron,aluminum, brass, and some plastics.
EP
OX
IES
MA
INT
EN
AN
CE
PR
OD
UC
TS
80
Fixmaster® Poxy Pak™
Fixmaster®
High Performance Epoxy
Fixmaster®
4 Minute Epoxy
Fixmaster®
Underwater Repair Epoxy
Fixmaster®
Fast Cure Epoxy(Mixer Cups)
Fixmaster®
General PurposeEpoxy (Mixer Cups)
Fixmaster® Concrete Repair Epoxy
Manual Cartridge Applicator
Fixmaster®
Static Mixers
81120
993939939499392
97434
82093
214252142639088
21427
39366
983531
983441
1 oz. syringe
1 oz. syringe50 ml cartridge2 gallon kit
50 ml cartridge
4 oz. stick
10 - .12 fl. oz. cups10 - 1 oz. cups4 - .12 fl. oz. cups
10 - .12 fl. oz. cups
4 oz. stick
Required for use with 50 ml Loctite® Fixmaster® Epoxies.
Packaged 10/bag - for mixing and dispensing epoxies in 50 ml containers.
Clear
Tan
Transluscent
White
Grey
Transluscent
Grey
2,300
3,800
2,000
900
2,000
2,000
600
300
180
160
300
180
180
250
1
30
3-4
15
5
60
4-7
4-6 min.
8 hrs.
10 min.
30 min.
10 min.
1.5 hrs.
5-10 min.
1 hour
24 hours
1 hour
1 hour
12 hours
24 hours
1 hour
Properties based on ultimate cure.Epoxy properties based on mixing 20 g mass at 77°F.† Time to reach handling strength.
LOCTITE® BRAND FIXMASTER® EPOXY PROPERTIES CHART
Col
or (c
ured
)
Tem
pera
ture
R
esis
tanc
e, °F
Adhe
sive
Ten
sile
Sh
ear,
psi
Wor
king
Tim
e,M
inut
es
Fixt
ure
Tim
e †
Full
Cur
e
ABS,CFIA
CFIA
–
CFIA
CFIA
CFIA
–
Agen
cyAp
prov
als
ItemNumber ContainerP R O D U C T
Fixmaster®
Poxy Pak™
Fixmaster® High Performance Epoxy
Fixmaster®
4 Minute Epoxy
Fixmaster® Underwater Repair Epoxy
Fixmaster® Fast Cure Epoxy (Mixer Cups)
Fixmaster® General Purpose Epoxy (Mixer Cups)
Fixmaster® Concrete Repair Epoxy
LOCTITE® BRAND FIXMASTER® EPOXY BONDINGCHARACTERISTICS
Gap
Fill
ing
Fast
Cur
e Ti
me
Ferr
ous
Met
al R
epai
r
Toug
hene
d Fo
rmul
atio
n
Shoc
k R
esis
tanc
e
Wat
er R
esis
tanc
e
Plas
tic B
ondi
ng
Pain
tabl
e Fi
nish
Rub
ber
Bon
ding
Sand
able
Fin
ish
Met
al B
ondi
ng
Preferred choice Good choice Acceptable choice
P R O D U C T
NEW
EP
OX
IES
MA
INT
EN
AN
CE
PR
OD
UC
TS
81
LOCTITE® BRAND FIXMASTER® METAL-FILLED EPOXIESPROPERTIES CHART
P R O D U C T
Fixmaster® Superior Metal
Fixmaster® Steel Putty
Fixmaster® Fast Set Steel Putty
Fixmaster® Fast Set Steel Epoxy
Fixmaster® Aluminum Putty
Fixmaster® Wear Resistant Putty
Fixmaster® Wet Surface Repair Putty
Fixmaster® Metal Magic Steel™
Fixmaster® Stainless Steel Putty
Fixmaster® Steel Liquid
Fixmaster® Aluminum Liquid
Col
or
Cov
erag
e, ft
.2 at
1/4"
Thi
ckne
ss
Max
imum
O
pera
ting
Tem
pera
ture
, °F
Com
pres
sive
Stre
ngth
, psi
†
Tens
ile S
tren
gth,
psi †
Har
dnes
s (S
hore
D)
Wor
king
Tim
e,M
inut
es
Func
tiona
l Cur
e,
Hou
rs
Mix
Rat
io
by V
olum
e, r
: h
97473
999139991499912
39917
96604
97463
9874298743
96583
98853
97443
9748397484
97453
1 lb. kit
1 lb. kit4 lb. kit25 lb. kit
1 lb. kit
50 mlcartridge
1 lb. kit
1 lb. kit3 lb. kit
1 lb. kit
4 oz.stick
1 lb. kit
1 lb. kit4 lb. kit
1 lb. kit
DarkGrey
Grey
Grey
Grey
Alumin.
Grey
Grey
Grey
Grey
Grey
Alumin.
Agen
cyAp
prov
als
CFIA
ABS, CFIA
ABS, CFIA
CFIA
ABS, CFIA
ABS, CFIA
ABS
–
ABS, CFIA
ABS, CFIA
ABS, CFIA
0.25
0.31.27.5
0.4
3.2 in.3
0.5
0.361.1
.05
7 in.2
0.25
13 in.3
52 in.3
17 in.3
250
225
200
200
200
225
150
250
225
225
200
18,000
11,100
10,800
11,000
11,300
11,600
12,500
12,000
12,000
13,500
17,000
5,500
4,900
4,600
2,600
4,000
4,900
3,500
2,500
4,600
6,000
6,000
90
85
80
80
87
89
85
80
85
86
85
20
30
3
3
20
30
30
3
20
25
20
6
6
10 min.
10 min.
6
6
18
10 min.
6
6
6
4:1
2.5:1
1:1
1:1
4:1
2:1
1:1
N/A
4:1
4:1
5:1
7.25:1
6.25:1
1.8:1
100:73
6.3:1
2:1
10:9
N/A
9:1
9.5:1
9:1
Mix
Rat
io
by W
eigh
t, r
: h
Properties are based on mixing one lb. mass at 77°F, 7 days cure. † Ultimate cure.
ItemNumber Container
LOCTITE® BRAND FIXMASTER® METAL-FILLED EPOXY APPLICATIONSELECTION GUIDE
P R O D U C T Emer
genc
y M
etal
Rep
airs
Cor
rosi
on
Prot
ectio
n
Rep
airi
ng P
ipes
, Ta
nks
Reb
uild
ing
Shaf
ts,
Key
way
s, B
eari
ngs
Rep
airi
ng
Thre
aded
Pa
rts
Res
tori
ngTu
be S
heet
s
Pum
p R
epai
r
Rep
airi
ng E
ngin
eB
lock
s
Fixt
ures
and
Prot
otyp
es
Reb
uild
ing
Impe
llers
,Va
lves
Rep
airi
ng
Alum
inum
Part
s
Rep
airi
ng S
tain
less
Stee
l Par
ts
Form
ing
Mol
ds,
Fixt
ures
Fixmaster® Superior Metal
Fixmaster® Steel Putty
Fixmaster® Fast Set Steel Putty
Fixmaster® Fast Set Steel Epoxy
Fixmaster® Aluminum Putty
Fixmaster® Wear Resistant Putty
Fixmaster® Wet Surface Repair Putty
Fixmaster® Metal Magic Steel™
Fixmaster® Stainless Steel Putty
Fixmaster® Steel Liquid
Fixmaster® Aluminum Liquid
Wet
Sur
face
R
epai
rs
Preferred Choice Good Choice
FLO
OR
ING
& G
RO
UT
MA
INT
EN
AN
CE
PR
OD
UC
TS
82
Loctite® brand Fixmaster® Flooring Productsare specialty repair materials that fill or levelindustrial surfaces. A cost-effective, high-performance alternative to conventional flooringsystems, these epoxies are non-shrinking andhave good chemical and corrosion resistance,and high compression strength.
FLOORING & GROUT
Loctite® Fixmaster®
Deep Pour GroutAggregate-filled, epoxy system forpours up to 6" deep, including self-leveling applications underrails and sole plates. High strengthmaterial bonds to steel, concrete,and itself. Withstands high torque loading.
Loctite® Fixmaster®
Super GroutFixmaster® Super Grout aggregate-filled epoxy system is designed forgrouting up to 18" deep, includingself-leveling applications under railsand sole plates under typical dryservice temperatures of -29°C to+107°C (-20°F to +225°F). Loctite®
Fixmaster® Super Grout is a 100%solids epoxy system that is non-shrinking, chemical and corrosionresistant, stronger than concrete,and withstands high torqueloading.
Loctite® Fixmaster® ConcreteRepair EpoxyEnables permanent repairs to concreteand masonry. Convenient stick containspre-measured portions of activatorand base. Once cured can be tapped,drilled, screwed, sawed, filed orpainted, and will have an appearanceand texture similar to concrete.
Loctite® Fixmaster®
Magna-CreteA two-component, rapid settingconcrete repair and grouting system.Chemically resistant to most commonliquids and chemicals. Bonds toconcrete, wood, glass, steel, andother construction materials.
Loctite® Fixmaster®
Marine ChockingSelf-leveling, fast curing, non-shrinking grout. Outstandingchemical and vibration resistanceand compressive strength towithstand maximum loads.
Loctite® Fixmaster®
Fast Set GroutSelf-leveling, non-shrinking groutfor installing machinery, settinganchor bolts. Cures quickly. Can bepoured up to 1" thick. Compressionstrength and chemical resistanceare superior to concrete. Formsstrong bonds to old concrete andto itself.
Loctite® Fixmaster®
High Performance QuartzTrowelable epoxy for repairing andprotecting floors exposed toconcentrated acids, alkalis, andsolvents. Recommended forrestoring and protecting old concrete.
Loctite® Fixmaster® Floor FillTrowelable. For repairing andresurfacing cracks in concretefloors. Bonds to old and newconcrete and provides greaterstrength and chemical resistance.
NEW
FLOO
RIN
G &
GR
OU
TM
AIN
TE
NA
NC
E P
RO
DU
CT
S
83
Anch
or
Bol
tFa
sten
ing
Preferred choice Good choice
Engi
neIn
stal
latio
n
Gro
ut L
ight
Equi
pmen
t 1"
or
Les
s
Leve
ling
Equi
pmen
t
Gro
ut H
eavy
Equi
pmen
t 1"
to
6"
Cho
ckin
g(s
hips
)
Con
cret
eFl
oor
Rep
air
Ram
ps,
Load
ing
Doc
ks
Leve
ling
Floo
rs
Hig
hway
s,
Roa
dway
s
LOCTITE® BRAND FIXMASTER® FLOORING & GROUT APPLICATION SELECTION GUIDE
Gro
ut H
eavy
Equi
pmen
t to
18"
P R O D U C T Acid
/Che
mic
alR
esis
tant
Flo
or
Rep
air
Fixmaster® Deep Pour Grout
Fixmaster® Fast Set Grout
Fixmaster® Super Grout
Fixmaster® Floor Fill
Fixmaster® High Performance Quartz
Fixmaster® Magna-Crete
Fixmaster® Concrete Repair Epoxy
Fixmaster® Marine Chocking
LOCTITE® BRAND FIXMASTER® FLOORING & GROUT PROPERTIES CHART
Cov
erag
e
Col
or
Mix
edVi
scos
ity, c
P
Max
imum
Tem
pera
ture
, °F C
ompr
essi
veSt
reng
th, p
si
Wor
king
Ti
me,
Min
utes
Func
tiona
l C
ure,
Hou
rs
Mix
Rat
io b
y Vo
lum
e, r
: h
Mix
Rat
io b
y W
eigh
t, r
: h
ContainerItem
NumberP R O D U C T
99545
39637
33510
9936199365
96495
9555195555
36334
39366
39136975729610237316
5 gal. kit
2 gal. kit
5 gal. kit
10 lb. kit40 lb. kit
42 lb. kit
1 gal. kit5 gal. kit
10 lb. bottle
4 oz. stick
1 gal. kit2 gal. kit2 gal. kit1 gal. kit
Black
Red
Red
Grey
Grey
Grey
–
Grey
GreenGreen
OrangeOrange
Pourable
5,500
Pourable
Semi-Pourable
Paste
–
–
Putty
15,000
225
200
225
225
150
2000
–
250
250
14,500
14,500
12,900
15,000
12,000
13,000
–
12,000
22,000
30
10
285
40
45 Primer60 Topcoat
5-20
–
4-7
10
Agen
cyAp
prov
als
CFIA
CFIA
–
CFIA
CFIA
CFIA
–
–
ABS,CFIA
24
12
24
24
24
1-2
–
1
24
–
100:11.7
–
–
–
–
–
–
100:11.6
–
100:6.5
–
–
–
–
–
–
100:6.9
660 in.3
347 in.3
620 in.3
133 in.3532 in.3
15 ft.2 *
4.8 ft.2 *21.6 ft.2 *
–
–
167 in.3370 in.3370 in.3167 in.3
* Coverage at 1/4" thickness.
Chockin
gC
om
pund
Gro
uts
Gro
uts
Fixmaster® Deep Pour Grout
Fixmaster® Fast Set Grout
Fixmaster® Super Grout
Fixmaster® Floor Fill
Fixmaster® High Performance Quartz
Fixmaster® Magna-Crete
Fixmaster® Magna-Crete Activator
Fixmaster® Concrete Repair Epoxy
Fixmaster® Marine Chocking
Flo
or
Repair
and R
esu
rface
Flo
or
Repair
and
Resu
rface
Chockin
gC
om
pund
NEW
GA
SK
ET
ING
& S
EA
LIN
GM
AIN
TE
NA
NC
E P
RO
DU
CT
S
84
Loctite® brand gasketing products offerinnovative, precise and reliable sealing. They canbe applied manually or — for high volumeassembly — can be applied by automatedmethods, such as tracing, stenciling, and screen printing.
A leader in form-in-place gasket makers, gasket dressings, and general purpose sealants,The Loctite® brand offers a choice of anaerobics,RTV silicones, or solvent-based products to meetbroad gasketing and sealing needs.
GASKETING &SEALING
Loctite® 510™ GasketEliminator® Flange Sealant
A high temperature sealantengineered for making or dressinggaskets in rigid assemblies.Withstands temperatures to 400°F(204°C). Fills gaps up to 0.010"(0.254 mm) and permits clampingloads to be maintained for strong,leakproof assemblies.
Loctite® 518™ GasketEliminator® Flange Sealant
Ideal for on-the-spot and emergencyrepairs, or when a conventionalgasket is out of stock. Seals to300°F (149°C) and fills gaps to0.050" (1.27 mm) with primer. Canbe used on a variety of metalsurfaces, including aluminum.Forms a flexible, solvent resistantseal that will not tear or decay.Parts disassemble easily.
Loctite® QuickStix™ 548™
Gasket Eliminator®
Flange Sealant
Patented semi-solid formula is idealfor on-the-spot repairs, or when aconventional gasket is out of stock.Can be applied quickly and neatly ona variety of metal surfaces, includingaluminum, to form a flexible, solventresistant seal. Seals to 300°F(149°C) and fills gaps to 0.010".
Loctite® Gasket Sealant 1
Reliable, paste-like gasket sealant/dressing/coating. Sets quickly to ahard set and is recommended forrigid, permanent assemblies. Use to400°F. Resistant to gasoline andother solvents.
Loctite® Gasket Sealant 2
Reliable, paste-like gasket sealant/dressing/coating. Sets more slowlyto a pliable film best suited for non-rigid, vibrating assemblies. Use to400°F. Resistant to gasoline andother solvents.
Loctite® Instant Gasket
Makes high performance, leakproofgaskets in one minute. Equipmentcan be returned to serviceimmediately. Blowout resistant.Outperforms precut gaskets.
NEW
GA
SK
ET
ING
& S
EA
LING
MA
INT
EN
AN
CE
PR
OD
UC
TS
85
Loctite® 598™ Black
High Performance RTV Silicone Gasket MakerRetains high flexibility and oilresistance for longer gasket life.Temperature range -75°F to 625°F(-59°C to 329°C) intermittent. Lowodor, non-corrosive, low volatility.Resistant to most chemicals andsolvents. Fills gaps to .25".
Loctite® 587™ Blue
High Performance RTV Silicone Gasket MakerForms tough, flexible gasketsdirectly on the flange. Offers excellent adhesion to oily surfaces.Low odor, non-corrosive, lowvolatility. Withstands temperaturesto 500°F (260°C) intermittent.Resistant to most chemicals andsolvents. Fills gaps to .25".
Loctite® 5699™ Grey
High Performance RTV Silicone Gasket MakerRemains flexible and withstandshigh vibration. Designed for high-torque applications.Withstands temperatures from -75°F to 625°F (-59°C to 329°C)intermittant. Outstanding oil andshop fluid resistance. Non-corrosive, low odor.
Loctite® 5920™ Copper
High Performance RTV Silicone Gasket MakerPremium silicone that can withstand operating environmentsto 700°F (371°C) intermittent.Superior oil resistance. Low odor,non-corrosive, low volatility, non-conductive. Resistant to most chemicals and solvents. Fillsgaps to .25".
Loctite® Superflex® Blue RTV
Silicone Adhesive SealantCures to a tough, flexible rubber.Makes reliable “formed-in-place”gaskets that resist shrinking,cracking, and migrating. Coats pre-cut gaskets to increasereliability. Temperature range -65°F to 500°F (-54°C to 260°C)intermittent. Low volatility. Fillsgaps to .25".
Loctite® Superflex® Red HighTemp RTV
Silicone Adhesive SealantMakes gaskets that resisttemperatures to 600°F (315°C)intermittent. Resists aging,weather, and thermal cyclingwithout shrinking, cracking, orhardening. Fills gaps to .25".
Loctite® Superflex®
Non-Corrosive RTV
Clear Silicone Adhesive SealantNeutral curing and non-corrosive.For aluminum, concrete, andelectrical applications. Temperatureresistant to 400°F (204°C)continuous service, 500°F (260°C)intermittent.
Loctite® Superflex® RTV
Silicone Adhesive SealantGeneral purpose, one-part siliconeadhesive sealant cures at roomtemperature to form a tough rubberseal. Will not slump in overhead orvertical applications. Formulated towithstand extreme temperaturecycling, UV light, and ozone. Cannotbe painted. Available in black, clear,and white.
GA
SK
ET
ING
& S
EA
LIN
GM
AIN
TE
NA
NC
E P
RO
DU
CT
S
86
Loctite® QuickStix™ 534™
Hi-Tack Gasket Dressing
No mess semi-solid formula offersadded control and ease of use.Patented package is portable andwon't leak or spill. Seals and holdsthe heaviest gaskets in place during assembly. Solvent-free and low odor. Suitable to 300°F (149°C).
Loctite® High Temperature Gasket Maker
Slow-setting, non-hardening, high-temperature sealant.Recommended for heavy-dutyapplications. Temperature range -50°F to 600°F (-45°C to 315°C)intermittent. Resists common shop fluids.
Loctite® Copper Gasket Adhesive
Fast drying, metallic, copper sealanthelps dissipate heat, prevent gasketburnout, and improve heat transfer.Fills hot spots and surfaceimperfections. Temperature range -50°F to 500°F (-45°C to 260°C).Resists shop fluids.
Loctite® Hi-Tack Gasket Sealant
Red-colored, liquid sealant thatholds gaskets in place duringassembly. Seals and bonds rubber,cork, paper, felt, metal, andasbestos gaskets. Sets quickly to avery tacky film. Suitable to 500°F(260°C). Contains no ozone-depleting compounds.
Loctite® Aviation Gasket Sealant
Reliable, liquid gasket sealant,dressing, and coating. Thin,brushable dressing or sealer forclose-fitting parts. Use to 400°F.Resistant to gasoline and other solvents.
Loctite® Instant Gasket —Return equipment to serviceimmediately when you makeleakproof gaskets in just one minute with Loctite®
Instant Gasket. Outperformsprecut gaskets.
LOCTITE® BRAND GASKET ELIMINATOR® FLANGE SEALANTS PROPERTIES CHART
Visc
osity
cP/
Con
sist
ency
Tem
pera
ture
Ran
ge
Seal
ing
Tim
e
Gap
Fill
Rec
omm
ende
dPr
imer
Cur
edSt
ate
510™ Gasket Eliminator®
518™ Gasket Eliminator®
QuickStix™ 548™ Gasket Eliminator®
51031
5181751831
391513915239153
50 ml tube
6 ml tube 50 ml tube
9 gm stick18 gm stick37 gm stick
188,000/500,000 thixotropic paste
800,000/3,750,000 thixotropic paste
Semi-solid paste
Rigid
Flexible
Flexible
-65 to 400°F(-54 to 204°C)
-65 to 300°F(-54 to 149°C)
-65 to 300°F(-54 to 149°C)
30 mins.-4 hrs. w/primer4-24 hrs. without primer
30 mins.-4 hrs. w/primer4-24 hrs. without primer
>3 hours with or without primer
.020" w/primer
.010" w/o primer
.050" w/primer
.010" w/o primer
0.010"
7649™ Primer N™
7649™ Primer N™
7649™ Primer N™
Red
Red
Orange
ContainerItem
Number Col
or
P R O D U C T Agen
cyAp
prov
als
UL Classifiedfor U.S.
CFIA, NSF/ANSI 61
–NEW
NEW
GA
SK
ET
ING
& S
EA
LING
MA
INT
EN
AN
CE
PR
OD
UC
TS
87
LOCTITE® BRAND GASKETING AND SEALING PROPERTIES CHART
Oil
Res
ista
nce
Tem
pera
ture
Ran
ge
(Inte
rmitt
ant)
Seal
ing
Tim
e
Agen
cyAp
prov
als
Non
-C
orro
sive
Instant Gasket
Superflex® RTV
Superflex® Blue RTV
Superflex® Red HighTemp RTV
Superflex® Non-Corrosive RTV
598™ Black
587™ Blue
5920™ Copper
5699™ Grey
Aviation GasketSealant
Gasket Sealant 1
Gasket Sealant 2
Hi-Tack Gasket Sealant
QuickStix™ 534™ Hi-Tack Gasket Dressing
Copper Gasket Adhesive
High TemperatureGasket Maker
306843050930507
593305937530563595305957530562594305947582518
30560305333054130518
59630596753056482279
5138751388
3401859830598755986659891
58730587753056758791
3054282046
1871818581
3051730516
305103051130512
30513305143051580964
305243052530526
391553915639157
30535
30558
4 oz. can5 oz. cartridge7 oz. can
80 ml tube300 ml cartridge8 oz. can80 ml tube300 ml cartridge8 oz. can80 ml tube300 ml cartridge8 oz. can
80 ml tube300 ml cartridge8 oz. can12 oz. tube
80 ml tube300 ml cartridge8 oz. can12 oz. tube
80 ml tube300 ml cartridge
0.5 oz. tube70 ml tube300 ml cartridge8.75 oz. can49 lb. pail
70 ml tube300 ml cartridge8.75 oz. can17 liter pail
70 ml tube300 ml cartridge
70 ml tube300 ml cartridge
0.25 pt. brush can1 pt. brush can
1.5 oz. tube3 oz. tube7 fl. oz. tube
1.5 oz. tube3 oz. tube7 fl. oz. tube5 gal. can
0.25 pt. brush can1 pt. brush can9 oz. aerosol
9 gm stick19 gm stick38 gm stick
9 oz. aerosol
7 fl. oz. tube
Increased oil resistance
–
–
–
Oil resistant
Excellent oil resistance
Increased oil resistance
Increased oil resistance
Increased oil resistance
Oilresistant
Oilresistant
Oilresistant
Increased oil resistance
Oilresistant
Oilresistant
Oilresistant
Non-corrosive
–
–
–
–
Non-corrosive
Non-corrosive
Non-corrosive
Non-corrosive
Non-corrosive
Non-corrosive
Non-corrosive
Non-corrosive
Non-corrosive
Non-corrosive
Non-corrosive
-75 to 500°F(-59 to 260°C)
-65 to 450°F(-54 to 232°C)
-65 to 500°F(-54 to 260°C)
-75 to 600°F(-59 to 316°C)
-75 to 500°F(-59 to 260°C)
-75 to 625°F(-59 to 329°C)
-75 to 500°F(-59 to 260°C)
-65 to 700°F(-54 to 371°C)
-75 to 625°F(-59 to 329°C)
-65 to 400°F(-54 to 204°C)
-65 to 400°F(-54 to 204°C)
-65 to 400°F(-54 to 204°C)
-65 to 500°F(-54 to 260°C)Aerosol to 600°F
-65 to 300°F(-54 to 149°C)
-50 to 500°F(-45 to 260°C)
-50 to 600°F(-45 to 315°C)
Operating strength15 psi -1 min.
Tack free - 30 min.Full strength - 24 hrs.
Tack free - 30 min.Full strength - 24 hrs.
Tack free - 30 min.Full strength - 24 hrs.
Tack free - 25 min.Full strength - 24 hrs.
Tack free - 30 min.Full strength - 24 hrs.
Tack free - 30 min.Full strength - 24 hrs.
Tack free - 60 min.Full strength - 24 hrs.
Tack free - 30 min.Full strength - 24 hrs.
Full strength - 12 hrs.
Full strength - 24 hrs.
Remains tacky
5 min. to set
5 min. to set
Remains tacky
3-5 hours to set
GM 998-5990 Type I,Ford WSE-M4G323-A6,DaimlerChrysler MS-GF44 Grade A,CFIA
UL Classified for U.S.,ULC Classified for Canada,NSF/ANSI 51,CFIA
–
CFIA
UL Classified for U.S.,
ABS,CFIA
UL Classified for U.S.,NSF P1,CFIA,ABS
–
–
CFIA
CFIA
–
–
–
–
CFIA
Black
BlackBlackBlackClearClearClearWhiteWhiteWhite
Blue
Red
Clear
Black
Blue
Copper
Grey
Dark red-dish brown
Reddishbrown
Black
Red
Purple
Copper
Black
ContainerItem
Number Col
orP R O D U C T
NEW
LUB
RIC
AN
TS
MA
INT
EN
AN
CE
PR
OD
UC
TS
88
A variety of penetrants, greases, and oils areavailable for lasting, general-purpose lubricationor specific applications.
Loctite® brand ViperLube® Synthetic-BasedLubricants provide superior protection forequipment exposed to a wide range of operatingtemperatures and environments and are NSF H1rated for incidental food contact.
Formulated in partnership, Loctite® DuPont®
Krytox® RFE Lubricants are, quite simply, the most advanced lubricants in the world. Featuringastonishing lubricity, extreme temperatureresistance, nonflammability, and chemicalinertness; Krytox® RFE Lubricants are the cost-effective solution to a broad range of challenginglubrication problems in a variety of industries.
LUBRICANTS
Krytox® RFE PFPE LubricantThis grease lubricant has excellentlubrication properties over a broadtemperature range, will not causecracking or swelling, and contains acorrosion inhibitor protectingagainst undue wear. Eliminatessticking and aids in disassembly.Non-flammable, chemically inert.Compatible with chlorine. Seeproduct description sheet for test results.
Krytox® RFE PFPE HighPerformance LubricantSpecially-formulated, syntheticgrease designed to provide long-lasting lubrication for all types ofmoving and/or sliding parts. Thislubricant provides corrosionprotection and wear resistance overa broad temperature range.
Loctite® ViperLube® HighPerformance Synthetic GreaseNLGI Grade 2/Severe Duty GC-LBGrease provides superior protectionfor equipment exposed to a widerange of operating temperaturesand environments. Use as alubricant and protective anti-rustfilm on bearings, machine parts,equipment, or as a release agent ongaskets and seals. NSF H1 rated forincidental food contact.
Loctite® ViperLube®
Clear High Performance Synthetic GreaseLasts four times longer thanpetroleum-based lubricants.Withstands temperatures up to420°F (520°F intermittent).Contains PTFE for added protectionagainst friction and wear. Non-flammable. Contains no ODCs.NLGI #2 grade grease. Opaquewhite in color.
Loctite® ViperLube®
High PerformanceSynthetic Lubricant
Gear Oils – 90W, 140WExtends equipment life and reducesoil changes and energy costs.Recommended for use on gearsets, bearings, circulating oilsystems, chains, and worn gearunits. NSF H1 rated for incidentalfood contact.
Loctite® ViperLube®
High PerformanceSynthetic Lubricant
Lightweight Oils – 10W, 15W, 20WReduces varnish and deposits,minimizing the need forreplacement parts andmaintenance. Recommended foruse on hydraulic systems, rotaryscrew compressors, foodprocessing machinery, bearings,chains, and valves. NSF H1 ratedfor incidental food contact.
NEW
LUB
RIC
AN
TS
MA
INT
EN
AN
CE
PR
OD
UC
TS
89
Loctite® Extreme Pressure GreaseLubricates gears, bearings, andslides up to 450°F (232°C). NLGI#1 rated. Withstands extremes ofpressure, resists water washout.Maintains pumpability at lowtemperatures; will not take a hardset after cooling.
Loctite® Food Grade GreaseExtreme pressure grease withtemperature resistance to 450°F(232°C). NLGI #2 rated. Protectsafter flushouts and steam cleaning. NSF H1 rated forincidental food contact.
Loctite® Gear, Chain and Cable LubricantProtects and prolongs the life ofgears, chains, wire rope, and cable.Repels dirt, sand, and dust withminimum “throw-off” fromcentrifugal force. Contains noozone-depleting compounds.
Loctite® Hydraulic Jack OilNon-corrosive oil improveslubrication in all types of hydraulicunits (except hydraulic brakes).Contains antioxidant, anti-rust, and anti-wear additives.
Loctite® Maintain®
Lubricant Penetrant
Moisture Displacer & Rust PreventerSpray-on rust preventative for allmetal parts. Unfreezes rustedparts. Displaces and seals outmoisture. For use on steel,aluminum, brass, copper,magnesium, and other metals and alloys. Contains no ODCs.
Krytox® RFE Advanced PTFE Dry LubricantA high performance, syntheticlubricant designed to provide long-lasting lubrication for parts thatrequire a dry, thin lubricating film.This lubricant provides excellentlubrication properties over a broadtemperature range, and dries to thetouch in 60 seconds. It is non-oily,non-staining, non-migrating, andwon’t attract dirt or dust.
Krytox® RFE CleanerA multipurpose cleaner formulatedto remove Krytox® RFE Lubricants.It will also remove standardhydrocarbon and synthetic-basedlubricants. Krytox RFE® Cleaner isfast drying, residue-free, andformulated for tough industrial use.Cleans bearings, o-rings, seals,flanges, motors, slidingmechanisms, pumps, bushings, and more.
Loctite® C-200®
High Temperature Solid Film LubricantSolid film protection for engineparts, bearings and servo-mechanisms. Temperature resistantup to 750°F (400°C) as a dry filmlubricant, 2400°F (1315°C) as ananti-seize.
Loctite® Dielectric GreaseProvides a moisture-proof barrier that lubricates and protectselectrical equipment from salt, dirt,and corrosion. High dielectricstrength. Good thermal, oxidation,and chemical stability.
Loctite® Moly Dry Film LubricantSolid film lubricant for sliding surfaces and slow moving parts.Temperature resistant up to 750°F(400°C) as a dry film lubricant,2400°F (1315°C) as an anti-seize.Won’t squeeze out, burn off, or pick up dirt.
Loctite® Penetrating OilPenetrates, lubricates, and displacesmoisture. Protects against rust andcorrosion. Contains no ODCs.
Loctite® Silicone LubricantMultipurpose lubricant stopssticking, friction, squeaking, and binding of moving parts. Non-gumming. Will not mar paint, rubber, or plastic surfaces. Waterproofs andelectrically insulates.
Loctite® Solvo-Rust® Super Penetrating OilFrees rusted parts and keeps them lubricated and protected from rust after use. May be appliedon or near moving parts. Will notharm painted surfaces. Contains no ODCs. CFIA approved.
Loctite® White Lithium GreaseGeneral-purpose lubricating pastefor metal-to-metal and metal-to-plastic applications. Providescorrosion protection. Contains no ODCs.
LUB
RIC
AN
TS
MA
INT
EN
AN
CE
PR
OD
UC
TS
90
ViperLube® High Performance Synthetic Grease
ViperLube® Clear High PerformanceSynthetic Grease
ViperLube® High PerformanceSynthetic Lubricant Gear Oils
ViperLube® High PerformanceSynthetic Lubricant Lightweight Oils
ItemNumber ContainerWeight
367803678136782367833678436786370613771039146
39341393423936439363
367873835038351
388783887938880
367883835238353
388723887338874
388753887638877
–
–
90W90W90W
140W140W140W
10W10W10W
15W15W15W
20W20W20W
1 cc tube3 oz. tube14 oz. cartridge 400 gm can0.42 oz. tube10.1 oz. aerosol can30 lb. pail120 lb. drum55 gallon drum
3 oz. tube400 gm cartridge30 lb. pail120 lb. keg
1 gallon5 gallon55 gallon
1 gallon5 gallon55 gallon
1 gallon5 gallon55 gallon
1 gallon5 gallon55 gallon
1 gallon5 gallon55 gallon
400°F (204°C)continuous
500°F (260°C) intermittant
420°F (216°C)continuous520°F (271°C) intermittant
450°F (232°C)
450°F (232°C)
Type
of
Lubr
ican
t
Tem
pera
ture
Rei
sita
nce
Tem
pera
ture
Rei
sita
nce
Visc
osity
Gra
de
Pour
Poi
nt(A
STM
D 9
7)
Four
Bal
l Tes
t
Salt
Spra
y Te
st(A
STM
B 1
17)LOCTITE® BRAND
VIPERLUBE® SYNTHETIC LUBRICANTSPROPERTIES CHART
P R O D U C T
Pass
–
Pass
Pass
Agen
cy
Appr
oval
s
NSF H1,CFIA
NSF H1
NSF H1,CFIA
NSF H1,CFIA
0.45 mm(ASTMD 2266)
0-60 mm(ASTMD 2266)
0.48 mm(ASTMD 4172)
0.38 mm(ASTMD 4172)
0.40 mm(ASTMD 4172)
NLG
I Rat
ing
2
2
–
–
Synthetic hydrocarbon(polyalphaolefin based)
Synthetic hydrocarbon(polyalphaolefinbased)
Synthetic hydrocarbon(polyalphaolefin based)
Synthetic hydrocarbon(polyalphaolefin based)
Dro
p Po
int
500°F(260°C)(ASTMD 556)
<590°F (<310°C)(ASTMD 2265)
–
–
–
–
-30°C
-20°C
-75°C
-70°C
-50°C
240CST
–
220ISO
460ISO
32ISO
46ISO
68ISO
Krytox® RFE PFPE Lubricant
Krytox® RFE PFPE High Performance Lubricant
Krytox® RFE Advanced PTFE Dry Lubricant
Krytox® RFE Cleaner
ItemNumber Container
297103136131360
2971129709
30138
30615
2 oz. tube16 oz. net wt. cartridge16 lb. pail
2 oz. tube16 oz. net wt. cartridge
8 oz. net wt. aerosol
10 oz. net wt. aerosol
-15°F to 500°F(-26°C to 260°C)
-15°F to 500°F(-26°C to 260°C)
-15°F to 500°F(-26°C to 260°C)
–
Once filmis dry
–
Non
-Fl
amm
able
–
Hig
h Lo
ad
Cap
abili
ty
–
Che
mic
ally
-R
esis
tant
–
Oxy
gen
Com
patib
le*
–
Ther
mal
ly
Stab
le
2
2
–
–
NLG
I G
rade
Water repellant
–W
ater
/Ste
am
Res
ista
nt
–
Cor
rosi
on
Inhi
bito
rs
All plastics& metals
–
Com
patib
le w
ith
all P
last
ics,
M
etal
s,
Elas
tom
ers
LOCTITE® BRAND KRYTOX® RFE LUBRICANTSPROPERTIES CHART
P R O D U C T
*Per BAM 8104-411 & MSFC 106B under specific conditions. Test the proposed application thoroughly before use.
NEW
NEW
NEW
NEW
LUB
RIC
AN
TS
MA
INT
EN
AN
CE
PR
OD
UC
TS
91
ItemNumber Container
3989339894
30536
51242
51252
81251
3052230523
81204
398953989639897
8003251221
8124651360
81252
3053030543
367803678136782367833678436786370613771039146
39341393423936439363
367873835038351388783887938880
367883835238353388723887338874388753887638877
1.3 lb. can10 lb. can
0.33 oz. tube
14.5 oz. cartridge
14.5 oz. cartridge
12 oz. aerosol
1 qt. can1 gal. can
16 oz. aerosol
12 oz. aerosol1.3 lb. can10 lb. can
1 pt. spout can12 oz. aerosol
13 oz. aerosol5.3 oz. tube
12.25 oz. aerosol
1.5 oz. tube10.75 oz. aerosol
1 cc tube3 oz. tube14 oz. cartridge 400 gm can0.42 oz. tube10.1 oz. aerosol can30 lb. pail120 lb. barrel55 gallon drum
3 oz. tube400 gm cartridge30 lb. pail120 lb. keg
1 gallon, 90 W5 gallon, 90 W55 gallon, 90 W1 gallon, 140 W5 gallon, 140 W55 gallon, 140 W
1 gallon, 10 W5 gallon, 10 W55 gallon, 10 W1 gallon, 15 W5 gallon, 15 W55 gallon, 15 W1 gallon, 20 W5 gallon, 20 W55 gallon, 20 W
C-200® High TemperatureSolid Film Lubricant
Dielectric Grease
Extreme PressureGrease
Food Grade Grease
Gear, Chain and Cable Lubricant
Hydraulic Jack Oil
Maintain® Lubricant Penetrant
Moly Dry Film Lubricant
Penetrating Oil
Silicone Lubricant
Solvo-Rust® SuperPenetrating Oil
White LithiumGrease
ViperLube® High Performance Synthetic Grease
ViperLube® Clear Synthetic Grease
ViperLube® High Performance Synthetic LubricantGear Oils
ViperLube® High Performance Synthetic LubricantLightweight Oils
Preferred Choice Good Choice Acceptable Choice
Food
Pro
cess
ing
Equi
pmen
t
Clo
se F
ittin
g Pa
rts
Hig
h Te
mpe
ratu
re
Elec
tric
ally
Con
duct
ive
Elec
tric
alEq
uipm
ent
Gea
rs, B
eari
ngs,
C
able
, Con
veyo
rs
Hyd
raul
ic U
nits
(not
bra
kes)
For
Hig
hSp
eed
Bea
ring
s
For
Low
Spe
eds,
Hig
h Lo
ads
Cha
in-D
rive
n Eq
uipm
ent
Solid
Film
2400°F(1315°C)
400°F (204°C)
450°F (232°C)
450°F (232°C)
–
120°F (48°C)
–
750°F (400°C)
100°F (38°C)
400°F (204°C)
–
380°F (193°C)(dropping point)
400°F (204°C)continuous
500°F (260°C) intermittent
420°F (216°C) continuous
520°F (271°C) intermittent
450°F (232°C)
450°F (232°C)
LOCTITE® BRAND LUBRICANTSPROPERTIES CHART/APPLICATION SELECTION GUIDE
P R O D U C T Temperature Resistance
NEW
NEW
NEW
NEW
MA
CH
ININ
G C
OM
PO
UN
DS
MA
INT
EN
AN
CE
PR
OD
UC
TS
92
Loctite® brand Clover® Compounds have beenin demand for over 80 years for cutting,smoothing, and polishing metal surfaces. Clover®
compounds allow final finishing of metal surfacesnot practical with mechanical methods alone.Available in petroleum and water-based carriers.Common applications include: producing an ultra-flat surface such as the lapping of gauges, valveseats, and mechanical seal faces; smoothingshaft surfaces and bearing races; creatingperfectly-mated parts for running-in gears andfinishing industrial valves; cleaning surfaces andremoving material too difficult to remove byother methods, as in finishing hardened tool steel.
MACHININGCOMPOUNDS
Loctite® Clover® SiliconCarbide Grease Mix
The standard abrasive paste forfast metal removal. Produces asmooth, flat surface but not apolished one. Leaves a rust-preventing film on lapped surfaces.
Loctite® Clover® SiliconCarbide Pat Gel® Water Mix
Paste formulation for fast metalremoval. Biodegradable,recommended for applicationswhere cleanup with water isrequired.
Loctite® Clover®
Duplex Packaging
Silicon Carbide Grease Mix in twoconvenient grit sizes (120 and280). Item number 39598. (Kit)
MA
CH
ININ
G C
OM
PO
UN
DS
MA
INT
EN
AN
CE
PR
OD
UC
TS
93
7A6A5A
4A3A2A
1AA
BC
DNC
EFG
J
GRADE AND GRIT SELECTOR GUIDE
Grit
12001000800
600500400
320280
240220
180150
12010080
54
Extremely FinePolishing, high precision lapping
Very FineFor fine polishing and lapping
FineFor finishing, valve lapping, bearings, dies, and gauges
Medium FineFor cylinder lapping
MediumGeneral purpose for controlled metal removal
CoarseFor the initial “cut” fast removal of metal
Very CoarseFor fastest metal removal
1/1000Inches
Average Particle Sizeof Abrasive Grains
Microns(0.001mm)
0.120.200.38
0.560.680.90
1.281.75
2.482.60
3.404.80
5.606.80
15.00
18.00
359
141723
3344
6366
86122
142173267
463
G R A D E
Clover® Silicon Carbide Grease Mix
Clover® Silicon Carbide Pat Gel® Water Mix
LOCTITE® BRAND CLOVER® ITEMS
ItemNumber Container Grit Grade
3959839587395743956139549395363952339510394013941339426394393949939452394633947339483394283958939551395123944139465394043945539466394763948639590
39592395793956639554395413952839515394063941839431394443950439457394683947839488395423945839479
Kit - 4 oz. duplex can1 lb. can1 lb. can1 lb. can1 lb. can1 lb. can1 lb. can1 lb. can1 lb. can1 lb. can1 lb. can1 lb. can1 lb. can1 lb. can1 lb. can1 lb. can1 lb. can25 lb. pail25 lb. pail25 lb. pail25 lb. pail25 lb. pail25 lb. pail100 lb. drum100 lb. drum100 lb. drum100 lb. drum100 lb. drum100 lb. drum
1 lb. jar1 lb. jar1 lb. jar1 lb. jar1 lb. jar1 lb. jar1 lb. jar1 lb. jar1 lb. jar1 lb. jar1 lb. jar1 lb. jar1 lb. jar1 lb. jar1 lb. jar1 lb. jar25 lb. pail25 lb. pail25 lb. pail
120/28012001000800600500400320280240220180150120100805422012006003201801002801201008054
1200
12001000800600500400320280240220180150120100805450012080
E/A7A6A5A4A3A2A1AABCD
NCEFGJC7A4A1ADFAEFGJ
7A
7A6A5A4A3A2A1AABCD
NCEFGJ
3AEG
P R O D U C T
RE
TAIN
ING
MA
INT
EN
AN
CE
PR
OD
UC
TS
94
Use Loctite® brand liquid, paste, or semi-solidretaining compounds to bond non-threaded,cylindrical metal assemblies. Fill the inner voidsin close-fitting press fits, keyways, and splines.Mount bearings and bushings, and make pressfits even stronger.
RETAINING
Loctite® 603™
Retaining Compound
Press Fit/Oil TolerantA retaining compound tolerant ofoil and other contamination. Sealsand secures cylindrical assembliesup to 0.005" diametral clearance.Fixtures in 10 minutes. Preventsfretting and corrosion of metalassemblies.
Loctite® 609™
Retaining Compound
Press Fit/General PurposeA low viscosity, fast curingadhesive used for bonding rigidmetal assemblies. Ideal for gapdistances up to 0.005" (0.13 mm).Loctite® 609™ fixtures in just 10 minutes and provides shearstrength of 3,000 psi after 24hours. It easily joins dissimilarmetals and withstandstemperatures up to 300°F (149°C).
Loctite® 620™
Retaining Compound
Slip Fit/High Temperature A high temperature adhesive thathas the capability to operate at450°F (232°C) for long periods.Loctite® 620™ fixtures in 30minutes at room temperature, butrequires a secondary heat cure togenerate the high temperatureresistance. Used to bond cylindricalparts with gaps up to 0.015" (0.35mm). Loctite® 620™ provides ashear strength of 3,800 psi on steel after 24 hours.
Loctite® 660™ Quick Metal®
Retaining Compound
Press Fit RepairA creamy, non-running gel that isapplied onto cylindrical parts to fillsurface imperfections and repairworn areas. It contains no metal,but once assembled hardens to astrength that often doubles that of a press fit. Use Loctite® 660™ tosalvage worn metallic parts, or tokeep machinery running until newparts arrive. Use to 300°F (149°C).
Loctite® QuickStix™ 668™
Retaining Compound, High Temperature
General PurposeA high temperature retainingcompound in a revolutionary semi-solid formula. Patented, no-messpackage offers added convenienceand portability. Ideal for gaps up to0.005" on the diameter. Withstandstemperatures to 400°F (204°C).
NEW
RE
TAIN
ING
MA
INT
EN
AN
CE
PR
OD
UC
TS
95
LOCTITE® BRAND RETAINING COMPOUNDS PROPERTIES CHART
Appe
aran
ce
Max
imum
Gap
Fi
ll (D
iam
etra
l)
Shea
r St
reng
thSt
eel/
Stee
l (ps
i)*
Tem
pera
ture
R
ange
Set-
Up
Tim
e
Rec
omm
ende
d Pr
imer
Agen
cyAp
prov
als
ContainerItem
NumberP R O D U C T
603™
609™
620™
660™ Quick Metal®
QuickStix™ 668™
680™
214402144121442
609216093160941
620156204062070
6601066040
391473914839149
680156803568060
10 ml bottle 50 ml bottle 250 ml bottle
10 ml bottle 50 ml bottle 250 ml bottle
10 ml bottle 50 ml bottle 250 ml bottle
6 ml tube 50 ml tube
9 gm stick19 gm stick38 gm stick
10 ml bottle 50 ml bottle 250 ml bottle
Greenliquid
Greenliquid
Greenliquid
Silverpaste
Greenstick
Greenliquid
.005"
.005"
.015"
.020"
.005"
.015"
3,770 psi
2,300 psiminimum
3,800 psi
3,335 psi
1,870 psi
2,800 psiminimum
-65 to 300°F(-54 to 149°C)
-65 to 300°F(-54 to 149°C)
-65 to 450°F(-54 to 232°C)
-65 to 300°F(-54 to 149°C)
-65 to 400°F(-54 to 204°C)
-65 to 300°F(-54 to 149°C)
Set-up: 10 minutes Full strength: 24 hrs.
Set-up: 10 minutes Full strength: 24 hrs.
Set-up: 30 minutes Full strength: 24 hrs.
Set-up: 20 minutes Full strength: 24 hrs.
Set-up: 30 minutes Full strength: 24 hrs.
Set-up: 10 minutes Full strength: 24 hrs.
7649™Primer N™or 7471™Primer T™
7649™Primer N™or 7471™Primer T™
7649™Primer N™or 7471™Primer T™
7649™Primer N™or 7471™Primer T™
7649™Primer N™or 7471™Primer T™
7649™Primer N™or 7471™Primer T™
–
CFIA, Conforms to MIL-R-46082B for existing designs,ASTM D-5363 for new designs
ABS,CFIA
CFIA
–
ABS,NSF/ANSI 61
*Varies with substrates.
Loctite® 680™
Retaining Compound
Slip Fit/High StrengthA high strength, room-temperature-curing adhesive used to join fittedcylindrical parts. It fixtures in 10minutes and provides a shearstrength of 4,000 psi after 24 hours.Capable of filling diametral gaps upto 0.015" (0.27 mm). Loctite® 680™allows relaxed machining tolerancesand replaces clamp rings, setscrews, and snap rings.
Loctite® Hand Pumps areideal for dispensing liquidfrom all 50 ml and 250 ml anaerobic bottles. See page 106 for more information.
ADDITIONAL OFFERINGS
TH
RE
AD
LOC
KIN
GM
AIN
TE
NA
NC
E P
RO
DU
CT
S
96
From the creator of liquid threadlocking,choose the strength, temperature range, andcure speed you need to prevent loosening fromshock and vibration, and stop rust and corrosionof threaded metal fasteners. Removable topermanent strength threadlockers are availableto fit a variety of thread sizes and conditions.
The Loctite® brand now offers the sametrusted threadlocking performance in a patentednew semi-solid stick. Available in both medium andhigh strength formulas, Loctite® QuickStix™ areconvenient, portable and less messy, makingthem perfect for tough applications, especiallyoverhead. Loctite® QuickStix™ are easy to store ina toolbox, tool belt, or pocket making them theperfect complement to the trusted Henkel line ofLoctite® branded products.
THREADLOCKINGLoctite® 220™ Threadlocker
Low Strength/Wicking/BlueA low viscosity threadlocking adhesivethat allows the product to wick alongthe threads of preassembled fasteners.Perfect for fasteners up to 1⁄4" diameter (6 mm).
Loctite® 222MS™ Threadlocker
Low Strength/PurplePerfect for small fasteners up to 1⁄4"diameter (6 mm), long engagementlength fasteners, and componentsrequiring occasional adjustment. Applyto threaded parts before assembly.Parts can be disassembled with handtools. Approved for use in or aroundfood processing areas.
Loctite® 242® Threadlocker
Medium Strength/Removable/BlueRemovable strength, general purposethreadlocking adhesive especially wellsuited for fasteners between 1⁄4" to 3⁄4"diameter (6 to 20 mm). Applied tothreaded components before assembly,Loctite® 242® Threadlocker hascontrolled lubricity for accurate clamploads. Parts can be separated usinghand tools. Approved for use in oraround food processing areas.
Loctite® QuickStix™
268™ Threadlocker
High Strength/RedRevolutionary semi-solid stick formulais high strength and best suited forfasteners up to 3⁄4" (20 mm). Semi-solidformula offers added convenience andportability. Localized heat and handtools are required to separate parts.
Loctite® 290™ Threadlocker
Wicking/GreenA low viscosity, threadlocking liquid,that wicks along the threads of pre-assembled fasteners to secure them inplace. Seals porosities in welds andmetal parts. Ideal for fasteners rangingfrom #2 to 1⁄2" (2.2 to 12 mm) in size.Localized heat and hand tools areneeded for disassembly. Approved foruse in or around food processing areas.
Loctite® QuickStix™
248™ Threadlocker
Medium Strength/Removable/BlueNew, patented semi-solid stick formulaoffers added convenience andportability. Like Loctite® 242®, thisthreadlocker stick is well suited for 1⁄4"to 3⁄4" (6 to 20 mm) fasteners and isremovable with hand tools. The semi-solid formula also means it won’t spillor leak.
Loctite® 262™ Threadlocker
High Strength/RedA high strength product that is appliedto fasteners up to 3⁄4" (20 mm) in sizebefore assembly. Localized heat andhand tools are required to separateparts. Solvents will not weaken theadhesive bond. Approved for use in oraround food processing areas.
Loctite® 7649™ Primer N™
Decreases the set-up time of Loctite®
brand threadlockers and increasesbreakaway torque on most fastenersurfaces. Allows cold weatherapplication. Contains no ozone-depleting compounds.
NEW
NEW
TH
RE
AD
LOC
KIN
GM
AIN
TE
NA
NC
E P
RO
DU
CT
S
97
LOCTITE® BRAND THREADLOCKERSPROPERTIES CHART
Col
or
Fast
ener
Si
ze
Bre
ak/P
reva
il To
rque
*
Tem
pera
ture
R
ange
Cur
e Sp
eed,
St
eel @
25C
Rec
omm
ende
d Pr
imer
Agen
cy
Appr
oval
s
ContainerItem
NumberP R O D U C T
220™
222MS™
242®
QuickStix™ 248™
262™
QuickStix™ 268™
290™
7649™ Primer N™
373883918622041
222212223122241
242212423124241
3768437087
262212623126241
3768537686
290212903129041
213472134838402
10 ml bottle50 ml bottle 250 ml bottle
10 ml bottle 50 ml bottle 250 ml bottle
10 ml bottle 50 ml bottle 250 ml bottle
9 gm stick19 gm stick
10 ml bottle 50 ml bottle 250 ml bottle
9 gm stick19 gm stick
10 ml bottle 50 ml bottle 250 ml bottle
25 gm aerosol 4.5 oz. aerosol1.75 fl. oz. aluminum bottle
Blue
Purple
Blue
Blue
Red
Red
Green
–
Under 1/4"
#2 to 1/4"(2.2 mm to
6 mm)
1/4" to 3/4"(6 mm to 20 mm)
1/4" to 3/4"(6 mm to 20 mm)
Up to 3/4"(up to 20 mm)
Up to 3/4"(up to 20 mm)
#2 to 1/2"(2.2 mm to
12 mm)
–
85/170
53/30
110/43
110/43
189/275
202/4
85/250
–
-65 to 300°F(-54 to 149°C)
-65 to 300°F(-54 to 149°C)
-65 to 300°F(-54 to 149°C)
-65 to 300°F(-54 to 149°C)
-65 to 300°F(-54 to 149°C)
-65 to 300°F(-54 to 149°C)
-65 to 300°F(-54 to 149°C)
–
Fixture - 6 minutesFull strength - 24 hrs.
Fixture - 10 minutes(5 minutes w/primer)Full strength - 24 hrs.
Fixture - 10 minutes(3 minutes w/primer)Full strength - 24 hrs.
Fixture - 10 minutes(3 minutes w/primer)Full strength - 24 hrs.
Fixture - 5 minutes(5 minutes w/primer)Full strength - 24 hrs.
Fixture - 20 minutes(5 minutes w/primer)Full strength - 24 hrs.
Fixture - 20 minutes(5 minutes w/primer)Full strength - 24 hrs.
–
7649™PrimerN™**
7649™PrimerN™**
7649™PrimerN™**
7649™PrimerN™**
7649™PrimerN™**
7649™PrimerN™**
7649™PrimerN™**
–
MIL-S-46163A for existing designs,ASTM D-5363†, CFIA
MIL-S-46163A forexisting designs,ASTM D-5363†,NSF P1, CFIA
MIL-S-46163A forexisting designs,ASTM D-5363†, NSF/ANSI 61,NSF P1, CFIA, ABS
NSF/ANSI 61,CFIA
MIL-S-46163A forexisting designs,ASTM D-5363†,NSF P1, CFIA, ABS
CFIA
MIL-S-46163A forexisting designs, NSF/ANSI 61,ASTM D-5363†, NSF P1, CFIA
MIL-S-22473E for existing designs,ASTM D-5363†, NSF/ANSI 61, NSF P1, CFIA
* Break & Prevail Torque values cited are for M10 steel nuts and bolts.** Loctite® 7471™ Primer T™ is also an acceptable alternative. See pages 48 and 49 for more information.† For new designs.
HIGH STRENGTH
LOCTITE® 262™ THREADLOCKER• Heavy equipment• Suspension bolts• Motor and pump mounts• Bearing cap bolts and studs
WICKING
���������
������
LOCTITE® 290™ THREADLOCKER• Preassembled fasteners• Instrumentation screws• Electrical connectors• Carburetors
LOW STRENGTH
�������������������������
LOCTITE® 222MS™ THREADLOCKER• Set screws• Adjustment screws• Calibration screws• Meters and gauges
REMOVABLE
������������
��������
LOCTITE® 242® LIQUID OR 248™ STICK THREADLOCKER• Machine tools and presses• Pumps and compressors• Mounting bolts• Gear boxes
Apply 222MS™ Apply 242®
or 248™
Apply 290™Apply 262™
NEW
NEW
Loctite® Hand Pumps areideal for dispensing liquidfrom all 50 ml and 250 mlanaerobic bottles. See page 106 for more information.
ADDITIONAL OFFERINGS
TH
RE
AD
SE
ALI
NG
MA
INT
EN
AN
CE
PR
OD
UC
TS
98
Loctite® brand thread sealants seal andsecure plastic and metal pipes and fittings. Byfilling the space between threaded metal parts,thread sealants harden to prevent leaking.Designed for low and high pressureapplications, thread sealants seal instantly forlow pressure testing. When fully cured, theyseal to the burst strength of most pipingsystems. For repairs, parts may bedisassembled with basic hand tools.
THREAD SEALINGLoctite® QuickStix™ 561™
PST® Pipe Sealant
New, patented, semi-solid stickformula offers added convenience andportability. Like Loctite® 565™ PST®,this product has immediate lowpressure sealing, eases disassembly,and will not contaminate or clog lines.The semi-solid formula also means itwon’t spill or leak, making it great foroverhead applications or carrying in apocket or toolbox.
Loctite® 545™ Thread Sealant
Hydraulic/Pneumatic FittingsContains no fillers or particles whichcould contaminate system fluids, foulvalves, or clog fine filters and screens.Suitable for fittings up to 2" (50 mm)in diameter, Loctite® 545™ hasexcellent solvent resistance.
Loctite® 564™ Thread Sealant
General PurposeCures rapidly to provide immediate lowpressure sealing. Its lower strengthallows easy disassembly, and isrecommended even on larger (>2")diameter pipes. Loctite® 564™ protectsmated threaded areas from rust andcorrosion.
Loctite® 565™ PST®
Thread Sealant
Controlled StrengthFormulated specifically for metal,tapered, pipe thread fittings, thisproduct cures rapidly to provideimmediate low pressure sealing.Controlled lubricity prevents gallingand protects from rust and corrosion.Loctite® 565™ PST® can be used onfittings up to 2" (50 mm) in diameter.
Loctite® 567™ PST®
Thread Sealant
High TemperatureA high performance sealant that locksand seals metal, tapered pipe threadsand fittings. Ideal for stainless steel,aluminum, galvanized metal, and otherinert metals. This product has excellentsolvent resistance, allows easyassembly, and prevents galling.Excellent for high pressure applications.
Loctite® 55™ Pipe Sealing Cord
A general purpose threaded pipe andfitting sealant. Loctite® 55™ PipeSealing Cord is a non-curing, coatedmultifilament cord that seals out air andother common gases and fluids. Built-in cutter to easily apply the properamount of cord. Recommended forsealing metal and plastic tapered pipe threads andfittings up to 4" NPT. Allows for post assembly adjustments.
NEW
TH
RE
AD
SE
ALIN
GM
AIN
TE
NA
NC
E P
RO
DU
CT
S
99
LOCTITE® BRAND THREAD SEALANTS PROPERTIES CHART
Appe
aran
ce
Pres
sure
R
esis
tanc
e (p
si)
Visc
osity
cPs
Tem
pera
ture
R
ange
Seal
to
Ope
ratin
g Pr
essu
re
Rec
omm
ende
d Pr
imer
Agen
cyAp
prov
als
ContainerItem
NumberP R O D U C T
545™
QuickStix™ 561™ PST®
564™
565™ PST®
567™ PST®
55™ Pipe Sealing Cord
H.V.A.C. Blue PipeJoint Compound
No More Leaks™
Pipe Joint Compound
Thread Seal Tapewith PTFE
Thread Sealant with PTFE
324295453154541
37127
28753287542875534759
56507565315654156571
56707567475676533241
3508239036
8248082481
807258072480726
3055630557
39904
3053430561
10 ml bottle50 ml bottle250 ml bottle
19 gram stick
6 ml tube50 ml tube 250 ml tube350 ml brush can
6 ml tube 50 ml tube 250 ml tube 300 ml cartridge
6 ml tube 50 ml tube 250 ml tube16 oz. brush can
5,700 inches1,968 inches
0.25 pt. brush can1 pt. brush can
2 fl. oz. tube7 fl. oz. tube1 pt. brush can
0.25 pt. brush can1 pt. brush can
1/2" x 520" x .003"
0.25 pt.brush can1 pt. brush can
Purpleliquid
Whitepaste
Whitepaste
Whitepaste
Whitepaste
Whitecoated
cord
Blue paste
White paste
Black paste
White tape
White paste
10,000
10,000
10,000
10,000
10,000
10,000
5,000
5,000
5,000
Pressure rating of pipe
5,000
14,000
Semi-solid paste
90,500
300,000
540,000
N/A
20,000-30,000
90,000-110,000
35,000-45,000
N/A
50,000-60,000
-65 to 300°F(-54 to 149°C)
-65 to 300°F(-54 to 149°C)
-65 to 300°F(-54 to 149°C)
-65 to 300°F(-54 to 149°C)
-65 to 400°F(-54 to 204°C)
Up to 300°F(150°C)
-65 to 400°F(-54 to 204°C)
-65 to 400°F(-54 to 204°C)
-65 to 400°F(-54 to 204°C)
Up to 500°F
-60 to 300°F(-51 to 149°C)
4 hours
4 hours
4 hours
4 hours
4 hours
Instant
Instant
Instant
Instant
Instant
Instant
7649™ Primer N™ or
7471™ Primer T™
7649™ Primer N™ or
7471™ Primer T™
7649™ Primer N™ or
7471™ Primer T™
7649™ Primer N™ or
7471™ Primer T™
7649™ Primer N™ or
7471™ Primer T™
–
–
–
–
–
–
CFIA,ABS
ULC Classified for Canada,UL Classified for U.S.,CSA International,NSF/ANSI 61, CFIA
ULC Classified for Canada,CSA International,NSF/ANSI 61, CFIA
ULC Classified for Canada,UL Classified for U.S.,CSA International,NSF/ANSI 61,CFIA, AGA
UL Classified for U.S.,ULC Classified for Canada,CSA International,CFIA, ABS
UL Listed,CSA International,NSF/ANSI 61
CFIA
NSF/ANSI 61,CFIA
–
Conforms to MIL-T-27730
CFIA
Loctite® H.V.A.C. Blue Pipe Joint Compound
Tough, pliable sealant speciallyformulated for heating, airconditioning, and refrigerationapplications. Sets up quickly to allowimmediate assembly and to keep jointstight in areas of high vibration andthermal cycling. Seals oils,refrigerants, butane, propane, naturalgas, and more. Easy cleanup.
Loctite® No More Leaks™
Plastic Pipe SealantSeals plastic pipes and allows easydisassembly. Specially formulatedwithout the added lubricity of PTFE toavoid cracked fittings caused by over-tightened plastic joints.
Loctite® Thread Seal Tapewith PTFE1⁄2" x 520" tape with plastic spool andshell. Can be used on temperatures upto 500°F. Oxygen service compatible.
Loctite® Thread Sealant with PTFE
A general purpose sealant with theadded lubricity of PTFE for metal pipes.Won't shred like tape and allows easydisassembly. Resists common shopfluids.
Loctite® Pipe Joint Compound
Economical, general purpose pipe thread sealant that won't shred like tape and allows easy disassembly. Resists common shop fluids.
NEW
WE
AR
ING
CO
MP
OU
ND
SM
AIN
TE
NA
NC
E P
RO
DU
CT
S
100
Loctite® brand Nordbak® Wearing Compoundscombine the superior wear properties ofceramic and the convenience of two-part epoxiesto protect equipment from corrosion, abrasion,and other wear encountered in harsh industrialenvironments. Available in trowelable andbrushable formulations with special fillers fortough conditions.
WEARINGCOMPOUNDS
Loctite® Nordbak®
High Temperature Wearing Compound
Resists sliding abrasion andtemperatures to 450°F. Must bepost-cured for maximumtemperature resistance andperformance. Trowelable.
Loctite® Nordbak®
Ultra High TemperatureWearing Compound
Resists sliding abrasion andtemperatures to 550°F. Must bepost-cured for maximumtemperature resistance andperformance. Trowelable.
Loctite® Nordbak®
Wearing Compound
Large ceramic beads and finesilicon carbide in a highperformance epoxy system protectagainst sliding abrasion to 250°F.Non-sagging. Trowelable.
Loctite® Nordbak® Fast CureWearing Compound
A faster version of WearingCompound, this epoxy renews wornsurfaces fast, reducing downtime toput equipment back in service in aslittle as three hours. Trowelable.
Loctite® Nordbak® HighImpact Wearing Compound
Rubber-modified epoxy protectsagainst sliding abrasion and impactto 250°F. Trowelable.
Loctite® Nordbak®
Castable Wearing Compound
For casting wear-resistant parts.Pourable ceramic compound can becast into any shape. Resiststemperatures to 225°F.
WE
AR
ING
CO
MP
OU
ND
SM
AIN
TE
NA
NC
E P
RO
DU
CT
S
101
Loctite® Nordbak® HighTemperature Pneu-Wear
Protects against fine particle abrasion and temperatures to450°F. Must be post-cured formaximum temperature resistanceand performance. Trowelable.
Loctite® Nordbak® Ultra HighTemperature Pneu-Wear
Protects against fine particleabrasion and temperatures to550°F. Must be post-cured formaximum temperature resistanceand performance. Trowelable.
Loctite® Nordbak® Pneu-Wear
Filled with small ceramic beads andsilicon carbide for maximumprotection against fine particleabrasion to 250°F. Trowelable.
Loctite® Nordbak® Fast CurePneu-Wear
Fast cure version of standardLoctite® Nordbak® Pneu-Wearprotects against fine particleabrasion to 225°F and cures in just 3 hours. Trowelable.
Loctite® Nordbak® ComboBead Wearing Compound
This epoxy system combines theabrasion resistance qualities of bothlarge and small ceramic beads andsilicon carbide. Protects against hard sliding abrasion and extends the life of material handling equipment. Trowelable.
Loctite® Nordbak®
Brushable Ceramic
Brushes on to form a smooth,corrosion-resistant coating.Protects against turbulence,abrasion, and cavitation. Can alsobe used as a top coat over Loctite®
Nordbak® wearing compounds forsurface rebuilding and lastingprotection. Resists temperatures to 200°F.
WE
AR
ING
CO
MP
OU
ND
SM
AIN
TE
NA
NC
E P
RO
DU
CT
S
102
Loctite® Nordbak® ChemicalResistant Coating
Smooth, glossy, low friction finishprotects against turbulence,abrasion, and cavitation. Thisadvanced epoxy protectsequipment from extreme chemicalattack and corrosion. Low viscosityepoxy can be applied by brush.
Loctite® Nordbak®
High Temperature Brushable Ceramic
Provides protection againstturbulence, abrasion, and cavitationup to 550°F. Must be post-curedfor maximum temperatureresistance and performance.
Loctite® Nordbak® CeramicTile Adhesive
High strength. For securing ceramicwear tiles to vertical, horizontal, andoverhead surfaces. Excellent shockand impact resistance. Trowelable.Resists temperatures to 200°F.
LOCTITE® BRAND NORDBAK® WEARING COMPOUNDSPROPERTIES CHART
Cov
erag
e, ft
.2 @
1/4
" Th
ickn
ess
Max
imum
Ope
ratin
gTe
mpe
ratu
re, °
F
Com
pres
sive
Stre
ngth
, psi
Har
dnes
s(S
hore
D)
Wor
king
Tim
e,M
inut
es, 7
7°F
Func
tiona
l Cur
e,H
ours
, 77°
F
Mix
Rat
ioby
Vol
ume,
r :
h
Mix
Rat
ioby
Wei
ght,
r :
h
Properties based on mixing one lb. mass at 77°F, ultimate cure. *20 mil thickness. ▲ Requires heat cure. See Technical Data Sheet.
ContainerItem
NumberP R O D U C T Col
or
5 lb. kit25 lb. kit
6 lb. kit
25 lb. kit
25 lb. kit
3 lb. kit25 lb. kit
6 lb. kit
25 lb. kit
25 lb. kit
25 lb. kit
25 lb. kit
6 lb. kit
2 lb. kit6 lb. kit
2 lb. kit
2 lb. kit
12 lb. kit
20 lb. kit
250
225
450
550
250
225
450
550
250
225
250
200
200
550
150
200
16,000
10,000
15,000
–
15,000
12,000
15,000
–
15,000
18,500
13,000
12,500
12,500
16,000
10,000
14,000
90
90
85
90
90
90
90
90
85
90
90
85
85
90
83
88
30
10
30
30
30
10
30
30
30
30
25
30
15
120
20
60
7
3
▲
▲
6
3
▲
▲
6
6
8
6
5
▲
16
12
2:1
2:1
4:1
2.44:1
4:1
2:1
4:1
2:1
2:1
2:1
2:1
2.75:1
2.8:1
2.6:1
2.3:1
1:1
2:1
2:1
3.9:1
2.85:1
4:1
2:1
4:1
2.27:1
2:1
6.8:1
2:1
4.8:1
4.5:1
4.25:1
3.4:1
3.7:1
Agen
cyAp
prov
als
–
–
–
–
ABS
–
–
–
–
–
–
ABS
–
–
–
–
1.758.75
2.1
9
9
1.19
2.1
8.8
8.8
8.75
277 in.3
2.3
12*36*
12*
12*
74*
12
Grey
Blue
Grey
Red
Grey
Blue
Grey
Red
Grey
Grey
Grey
Grey
White
Red
Grey
Beige
Nordbak® Wearing Compound
Nordbak® Fast CureWearing Compound
Nordbak® High TemperatureWearing Compound
Nordbak® Ultra High Temperature Wearing Compound
Nordbak® Pneu-Wear
Nordbak® Fast Cure Pneu-Wear
Nordbak® High Temperature Pneu-Wear
Nordbak® Ultra High Temperature Pneu-Wear
Nordbak® High ImpactWearing Compound
Nordbak® Castable Wearing Compound
Nordbak® Combo Bead Wearing Compound
Nordbak® Brushable Ceramic - Grey
Nordbak® Brushable Ceramic - White
Nordbak® High TemperatureBrushable Ceramic
Nordbak® Chemical Resistant Coating
Nordbak® Ceramic Tile Adhesive
9981399812
96373
99112
96392
9838398382
96363
98372
96332
39918
98992
96303
9873398732
96443
96433
96092
97762
Sta
ndard
Fin
e P
art
icle
Specia
lty
Wear
Tiles
Bru
shable
Coati
ngs
WE
AR
ING
CO
MP
OU
ND
SM
AIN
TE
NA
NC
E P
RO
DU
CT
S
103
Fine
Par
ticle
Abra
sion
Preferred choice Good choice
Impa
ctR
esis
tanc
e
Hig
h Te
mpe
ratu
reR
esis
tanc
e
Fast
Cur
e
Che
mic
al C
orro
sion
Prot
ectio
n
Mul
tiple
Par
ticle
Abra
sion
Pum
p R
epai
r
Cor
rosi
onPr
otec
tion
Cyc
lone
s
Fan
Hou
sing
s
Elbo
ws
Tile
Inst
alla
tion
LOCTITE® BRAND NORDBAK® WEARING COMPOUNDS APPLICATIONSELECTION GUIDE
P R O D U C T Chu
tes
Nordbak® Wearing Compound
Nordbak® Fast CureWearing Compound
Nordbak® High TemperatureWearing Compound
Nordbak® Ultra High TemperatureWearing Compound
Nordbak® Pneu-Wear
Nordbak® Fast Cure Pneu-Wear
Nordbak® High Temperature Pneu-Wear
Nordbak® Ultra High Temperature Pneu-Wear
Nordbak® High ImpactWearing Compound
Nordbak® Castable Wearing Compound
Nordbak® Combo Bead Wearing Compound
Nordbak® Brushable Ceramic - Grey
Nordbak® Brushable Ceramic - White
Nordbak® High TemperatureBrushable Ceramic
Nordbak® Chemical Resistant Coating
Nordbak® Ceramic Tile Adhesive
Sta
ndard
Fin
e P
art
icle
Specia
lty
Wear
Tiles
Bru
shable
Coati
ngs
Loctite® brand Nordbak® Epoxies —Tackle the toughest industrial repair jobs withthe #1 name in wearing compounds.
SP
EC
IAL
PR
OD
UC
TS
MA
INT
EN
AN
CE
PR
OD
UC
TS
104
These special support products provideuniquely designed, long-lasting solutions to themost common maintenance problems.
SPECIAL PRODUCTSLoctite® Form-A-Thread®
Stripped Thread Repair Kit Permanently repairs strippedthreads and fasteners in fiveminutes (up to SAE Grade 5English and 8.8 metric). Allows upto 1,538 in. lbs. torque (on 1" bolt)and 300°F. Resists most shop fluids.
Loctite® O-Ring Making KitMakes replacement, highperformance o-rings in less than aminute. This compact kit containsthree-foot lengths of commondiameters of Buna N cord, Loctite®
404™ Quick Set™ Instant Adhesive,o-ring fixture, blade, awaterproofing solution, and acleanup solution.
Loctite® Fixmaster®
2000° PuttySingle-component putty seals andrepairs damaged metal in operatingenvironments up to 2000°F. Non-toxic, water-based and solvent-free.
Loctite® Pipe Repair KitUrethane impregnated fiberglasstape, activated by water, for reliable,temporary repairs of metal, plastic,and composite pipes. IncludesLoctite® Fixmaster® Metal MagicSteelTM epoxy stick and gloves. Cures in 30 minutes.
Loctite® Pro Lock™ Tight®
Multi-Purpose Anaerobic GelThis product seals, locks, andretains. It seals against most liquids and gases and works well on coarse threads, large gaps, andall overhead applications.
Loctite® Maintenance TackleboxDesigned to fit in a mechanics toolchest, this kit contains ten greatLoctite® branded products and aLoctite® "Do-it-Right" Users Guide.
Loctite® Quick Service ToolkitThe “original” Loctite® kit containingeight of the most common Loctite®
branded products.
Loctite® ToolboxContaining fifteen of the latest andbest Loctite® brand technologies tosolve the most common mechanicalfailures, this kit contains everythinga professional needs to increasereliability at the base component level.
Loctite® Urethane SealantSingle component, gun-grade caulkthat bonds, seals, and waterproofsup to 180°F. Outstanding adhesionproperties to concrete, masonry,glass, plastics, wood, aluminum,and most other metals.
Loctite® ManufacturingReliability ToolboxContains twelve Loctite® brandeditems and is used during Loctite®
Manufacturing Reliability Training.
Loctite® Reliability TackleboxAn alternative to the ManufacturingReliability Toolbox, this kit containsthirteen Loctite® branded productsfor use during ManufacturingReliability Training.
NEW
NEW
NEW
NEW
SP
EC
IAL P
RO
DU
CT
SM
AIN
TE
NA
NC
E P
RO
DU
CT
S
105
LOCTITE® BRAND SPECIAL PRODUCTS ORDERING INFORMATION
Adhe
sive
Appe
aran
ce
Agen
cyAp
prov
als
ContainerItem
Number Max
imum
Te
mpe
ratu
reR
esis
tanc
e
P R O D U C T
Grey paste
Grey (mixed)
Yellow
Blue gel
LimestoneBlack
Clear
–
–
–
–
–
Fixmaster® 2000° Putty
Form-A-Thread® StrippedThread Repair Kit
Pipe Repair Kit
Pro Lock™ Tight®
Urethane Sealant
Loctite® O-Ring Making Kit
Loctite® Quick Service Toolkit
Loctite® Maintenance Tacklebox
Loctite® Toolbox
Loctite® Manufacturing Reliability Toolbox
Loctite® Reliability Tacklebox
95724
28654
9632196322
5160451642
3991636132*
00112
00101
33486
38956
31362
39062
8 oz. can
4.8 ml kit
2" x 6' tape4" x 12' tape
50 ml tube250 ml tube
10.2 oz. cartridge10.2 oz. cartridge
1 oz. waterproofing solution, part number 74126 1 oz. clean-up solvent, part number 753261/3 oz. 404™ Quick Set™ instant adhesive Cord - 3/32", 1/8", 3/16", 1/4" Fixture and cutting blade
242® Threadlocker, Medium Strength, 10 ml262™ Threadlocker, High Strength, 10 ml7649™ Primer N™, 4.5 oz. aerosol454™ Prism® Instant Adhesive Gel, 3 gm660™ Quick Metal® Retaining Compound, 6 ml565™ PST® Thread Sealant, 50 ml587™ Blue RTV Silicone Gasket Maker, 70 ml518™ Gasket Eliminator® Flange Sealant, 50 ml
242® Threadlocker, Medium Strength, 50 mlQuickStix™ 248™ Threadlocker, Medium Strength, 9 gm262™ Threadlocker, High Strength, 50 mlQuickStix™ 268™ Threadlocker, High Strength, 9 gm609™ Retaining Compound, 10 ml660™ Quick Metal® Retaining Compound, 50 mlQuickStix™ 561™ PST® Pipe Sealant, 19 gm518™ Gasket Eliminator® Flange Sealant, 50 ml598™ Black High Performance Silicone, 70 ml7649™ Primer N™, 25 gm aerosol can
220™ Threadlocker, Low Strength/Wicking, 10 ml222MS™ Threadlocker, Low Strength/Small Screw, 10 mlQuickStix™ 248™ Threadlocker, Medium Strength, 9 gmQuickStix™ 268™ Threadlocker, High Strength, 9 gm2440™ Threadlocker, Primerless Medium Strength, 10 ml2760™ Threadlocker, Primerless High Strength, 10 ml518™ Gasket Eliminator® Flange Sealant, 50 ml545™ Thread Sealant, Hydraulic/Pneumatic, 10 mlQuickStix™ 561™ PST® Pipe Sealant, 19 gm565™ PST® Thread Sealant, 50 ml587™ Blue, High Performance RTV Silicone, 70 ml641™ Retaining Compound, Low Strength, 10 ml660™ Quick Metal® Retaining Compound, 50 mlQuickStix™ C5-A® Copper Anti-Seize, 20 gm7649™ Primer N™, 1.75 oz. aerosol can
222MS™ Threadlocker, Low Strength/Small Screw, 10 ml242® Threadlocker, Medium Strength, 50 mlQuickStix™ 248™ Threadlocker, Medium Strength, 9 gm262™ Threadlocker, High Strength, 50 ml290™ Threadlocker, Wicking Grade, 50 ml518™ Gasket Eliminator® Flange Sealant, 50 ml545™ Thread Sealant, Hydraulic/Pneumatic, 50 ml565™ PST® Thread Sealant, 50 ml609™ Retaining Compound, 10 ml660™ Quick Metal® Retaining Compound, 50 ml7649™ Primer N™, 25 gm aerosol canInstant Gasket, 7 oz. can
220™ Threadlocker, Low Strength/Wicking, 10 ml222MS™ Threadlocker, Low Strength/Small Screw, 10 ml243™ Threadlocker, Medium Strength/Oil Resistant, 50 mlQuickStix™ 248™ Threadlocker, Medium Stength, 19 gmQuickStix™ 268™ Threadlocker Stick, High Strength, 19 gm515™ Gasket Eliminator® Flange Sealant, 50 mlQuickStix™ 561™ PST® Pipe Sealant, 19 gm567™ PST® Thread Sealant, High Temperature, 50 ml609™ Retaining Compound, 50 ml660™ Quick Metal® Retaining Compound, 50 ml7649™ Primer N™, 1.75 oz. aerosol canInstant Gasket, 7 oz. canQuickStix™ Silver Grade Anti-Seize, 20 gm
2000°F
300°F
250°F
300°F
180°F180°F
N/A
N/A
N/A
N/A
N/A
N/A
–
CFIA
CFIA
–
CFIA
CFIA
–
–
–
–
–
* Made-to-order item. May require up to a 7 week lead time.
NEW
NEW
NEW
NEW
DIS
PE
NS
ING
•
HA
ND
HE
LD A
PP
LIC
AT
OR
SE
QU
IPM
EN
T
106
Dispensing Hand Held ApplicatorsLoctite® brand Hand Held Applicators are ergonomically designedfor the hand delivery of adhesives and fluids directly from theiroriginal package. Whether pneumatic or manual, each item isdesigned for the simple, clean, hand held dispensing of fluids toreduce waste and operator contact over other methods. Selectionof a Loctite® brand Hand Held Applicator is based on product type,package configuration, and process requirements.
For spare parts, accessories, and additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
Loctite® Loctite® Loctite® Loctite® Loctite® Caulking Loctite®
50 ml/250 ml 10 ml/30 ml Syringe 30 ml Manual 1 Liter Collapsible Gun Conversion Kit Soft Squeeze Hand Pump Manual Plungers Syringe Applicator Bottle Holder for 50 ml Cartridges Bottles*
Item # 98414/97001 98192/98193 98026 98311 983445/98415 98345/98346/98347
Adhesive 1 1 1 1 2 1Components
Used To TL, RC ALL ALL TL, RC E, U, M AllDispense
Viscosity Low to Medium Low to High Low to High Low to Medium High to Paste Low to MediumRange
Type Manual Manual Manual Manual Manual Manual
Mix Ratio – – – – 1:1, 2:1 / 10:1 _
*Optional Bottle Caps (50 per pack)Dunce Cap with Red Sealer Cap – For 2 oz. bottle: Item 98348, for 4 and 8 oz. bottles: Item 98349.Luer-Slip Cap – For 2 oz. bottle: Item 98350, for 4 and 8 oz. bottles: Item 98351.
Loctite® Loctite® 50 ml Loctite® 200 ml/400 ml Loctite® 200 ml/400 ml Loctite® Universal Loctite® Fixmaster®
50 ml Manual Dual Cartridge Dual Cartridge Dual Cartridge Metal Dispenser for Rapid Rubber Applicator Pneumatic Applicator Manual Applicators Pneumatic Applicators 200/400 ml Cartridges Repair Dispenser
Item # 983531 97042 983436/983438/ 983437/983439/ 985245 39635985246 985249
Adhesive 2 2 2 2 2 2Components
Used To E, U, M E, U, M E, U, M E, U, M E, U, M RRDispense
Viscosity High to Paste High to Paste High to Paste High to Paste High to Paste Medium to HighRange
Type Manual Pneumatic Manual Pneumatic Manual Manual
ALL = All Fluids in Approved Packages M = Two-Component Methacrylates RC = Retaining Compounds TL = ThreadlockersE = Two-Component Epoxies RR = Rapid Rubber Repair Urethane S = Silicones U = Two-Component UrethanesG = Gasketing Products
DIS
PE
NS
ING
• HA
ND
HE
LD A
PP
LICA
TO
RS
EQ
UIP
ME
NT
107
Loctite® Brand Static Mix Nozzles and AccessoriesPRODUCT ITEM # DESCRIPTION
98444 50 ml Square Mix Nozzle, Luer/Stepped Combo Tip, 3.25" Overall Length,98364 5.3 mm sq., 16 elements, 1:1, 2:1 mix ratios. (98444: 10 pk, 98364: 1000 pk)
984569 50 ml Square Mix Nozzle, Luer/Stepped Combo Tip, 4.5" Overall Length,5.3 mm sq., 24 elements, 1:1, 2:1, 4:1 mix ratios. (10 pk)
98373 200/400 ml Square Mix Nozzle, Luer/Stepped Combo Tip, 5.0" Overall Length,98374 5.3 mm sq., 24 elements, 1:1, 2:1, 4:1 mix ratios. (98373: 10 pk, 98374: 1000 pk)
983440 50 ml Mix Nozzle, Luer Tip, 6.0" Overall Length, 6.3 mm dia., 20 elements, 1:1, 2:1, 4:1 mix ratios. (10 pk)
983441 50 ml Mix Nozzle, Stepped Tip, 6.0" Overall Length, 6.3 mm dia., 20 elements,985599 1:1, 2:1, 4:1 mix ratios. (983441: 10 pk, 985599: 4000 pk)
986087 50 ml Mix Nozzle, Stepped Tip, Keyed, 5.9" Overall Length, 5.4 mm dia., 28 elements, 10:1 mix ratio. (10 pk)
984570 200/400 ml Square Mix Nozzle, Stepped Tip, 5.1" Overall Length, 7.5 mm sq.,24 elements, 1:1, 2:1 mix ratios. (10 pk)
983442 200/400 ml Mix Nozzle, Stepped Tip, 7.3" Overall Length, 6.3 mm dia., 24 elements, 1:1, 2:1 mix ratios. (10 pk)
983443 200/400 ml Mix Nozzle, Stepped Tip, 8.8" Overall Length, 8 mm dia., 987527 24 elements, 1:1, 2:1 mix ratios. (983443: 10 pk, 987527: 1500 pk)
985247 200/400 ml Mix Nozzle, Stepped Tip, 10.8" Overall Length, 10 mm dia., 24 elements, 1:1, 2:1 mix ratios. (10 pk)
985248 200/400 ml Mix Nozzle, Stepped Tip, Keyed, 9.1" Overall Length, 8 mm dia.,24 elements, 4:1, 10:1 mix ratios. (10 pk)
985545 200/400 ml Mix Nozzle, Stepped Tip, Keyed, 10.8" Overall Length, 10 mm dia.,98409 24 elements, 4:1, 10:1 mix ratios. (985545: 10 pk, 98409: 1000 pk)
98430 200/400 ml Mix Nozzle, Stepped Tip, 14.2" Overall Length, 9.3 mm dia.,40 elements, 1:1, 2:1 mix ratios. (500 pk)
983444 Luer-Lok Adapter for 6.3 and 8 mm stepped tip Mix Nozzles, Allows for Dispense Needle Attachment, (10 pk), Mix Nozzles and Dispense Needlessold separately.
98344 Ribbon Tip Adapter, allows Ribbon Tip use with 10 mm 1:1, 2:1, 4:1 and 10:1, Mix Nozzles sold separately. (10 pk)
985658 12 mm Ribbon Tip. Tip Orifice: 12 mm x 2.4 mm. For use with 98410 Snap Tip Mix Nozzles. (985658: 10 pk, 98410: 500 pk)
985659 25 mm Ribbon Tip. Tip Orifice: 25 mm x 2.4 mm. For use with 98411 Snap Tip Mix Nozzles. (985659: 10 pk, 98411: 500 pk)
985660 43 mm Ribbon Tip. Tip Orifice: 43 mm x 2.4 mm. For use with 98412 Snap Tip Mix Nozzles. (985660: 10 pk, 98412: 500 pk)
985661 200/400 ml Snap Tip Mix Nozzle, 8 mm diameter. 8.9" overall length, 24 elements, 1:1, 2:1 mix ratios. For use with Ribbon Tips. (10 pk)
985662 200/400 ml Snap Tip Mix Nozzle, 9.3 mm dia., 9.3" overall length, 24 elements,98367 1:1, 2:1 mix ratios. For use with Ribbon Tips. (985662: 10 pk, 98367: 1000 pk)
985709 Snap Tip Mix Nozzle and Ribbon Tip Sample Kit. Contains: 6 pcs. each of: 12, 25, and 43 mm Ribbon Tips3 pcs. each of: 8 and 9.3 mm diameter Snap Tip Mix Nozzles
For additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
DIS
PE
NS
ING
•
HO
T M
ELT
AP
PLI
CA
TO
RS
EQ
UIP
ME
NT
108
Dispensing Hot Melt ApplicatorsLoctite® brand Hysol™ Hot Melt Applicators are state-of-the-artdispensing units designed for the application of hot melt adhesives.These units combine ergonomics, user-friendly design, andreliability. Selection of a Loctite® Hysol™ Hot Melt Applicator shouldbe based on the type of hot melt being used, stick diameter, and process requirements.
Loctite® Hysol™ Loctite® Loctite® Loctite® Loctite®
Reactive Urethane Hysol™ Hysol™ 050/ Hysol™ Hysol™ 075/ Loctite®
Cartridge Dispenser 050-LITE Hysol™ 050-HT 050-GAS Hysol™ 075-LT Hysol™ 175
Item # 98011 98029 98030/98031 98032 98033/98034 98035
Nominal Stick N/A 0.50" 0.50" 0.50" 0.75" 1.75"Diameter (Superstick™) (Superstick™) (Superstick™) (Maxistick™) (Polyshot™ sticks)
Dispense Melt >3 1.0 3.0 / 4.0 3.0 9.0/5.0 6.6Rate (lbs./hr.)
Applicator Adh. 300 ml 0.04 0.04 0.04 0.12 0.125Capacity (lbs.)
Heat Source Electric Electric Electric Butane Electric Electric
Dispense Air Manual Manual Manual Manual ManualPower
Dispense 121 200 195/215 195 182/121 195 & 215*Temp. (°C)
Hot Melt Reactive EVA/ EVA/ Polyamide/ EVA/ EVA/ EVA & Chemistry Urethane Polyolifin Polyolifin Polyolifin EVA CoolMelt™ Polyamide
Loctite® Hysol™ Loctite® Hysol™ Loctite® Hysol™ Loctite® Hysol™ Loctite® Hysol™ Loctite® Bench Mount175-AIR 175-AIR HT 175-SPRAY 175-SPRAY HT Wheelcoater Kit & Pneumatic Timer
Item # 98036 98040 98037 98041 98038 98042/98043
Nominal Stick 1.75" 1.75" 1.75" (SprayPac® 1.75" (SprayPac® Bulk –Diameter (Polyshot™ sticks) (Polyshot™ sticks) Polyshot™ sticks) Polyshot™ sticks)
Dispense Melt 8.8 8.8 8.0 8.0 – –Rate (lbs./hr.)
Applicator Adh. 0.125 0.125 0.125 0.125 3 –Capacity (lbs.)
Heat Source Electric Electric Electric Electric Electric –
Dispense Air Air Air Air Electric –Power
Dispense 195 215 180 195 190 –Temp. (°C)
Hot Melt EVA Polyamide EVA Spray Polyamide Spray EVA Bulk EVA/Chemistry Adhesive Adhesive Pellets Polyamide
*The Loctite® Hysol™ 175 applicator (manual electric) is supplied with both temperature modules.
For spare parts, accessories, and additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
DIS
PE
NS
ING
• HO
T M
ELT
NO
ZZ
LES
& A
CC
ES
SO
RIE
SE
QU
IPM
EN
T
109
Product Item # Description Used With
985225 Standard 1-Hole Nozzle, 98030, 98031, 98032,0.08" Diameter Cone Tip, 98033, 98034, 98035,5 pk 98036, 98040
985110 2-Hole Nozzle, 98030, 98031, 98032,.06" dia. x .39" spacing 98033, 98034, 98035,
98036, 98040
985111 3-Hole Nozzle, 98030, 98031, 98032,.06" dia. x .20" spacing 98033, 98034, 98035,
98036, 98040
985112 Diagonal Extension Nozzle, 98030, 98031, 98032,Tip = .14" dia. x 1.23" long 98033, 98034, 98035,
98036, 98040
985113 Needle Extension Nozzle, 98030, 98031, 98032,Tip = .05" dia. x 1.32" long 98033, 98034, 98035,
98036, 98040
985114 Spreader Extension Nozzle, 98030, 98031, 98032,Tip = (.09" x .25") 98033, 98034, 98035,sq. x 1.32" long 98036, 98040
985115 L-Nozzle, .06" dia. x 98033, 98034,.85" offset 98035, 98036,
98040
985116 T-Nozzle, 98033, 98034, 98035,.06" dia. x 1.5" spacing 98036, 98040
985088 Standard Adapter/Check 98030, 98031,Valve for Nozzles 98032, 98035,
98036, 98040
ANZ023N01 Standard Adapter/ 98033, 98034Check Valve/Jam Nut for Nozzles
985216 Ultra Wide Spray Nozzle, 98037, 980411.5" - 6.0" dia. pattern
985211 Narrow Spray Nozzle, 98037, 98041.05" - 1.25" dia. pattern
985122 Standard Wide Spray 98037, 98041Nozzle, 1.25" - 5.0" dia. pattern
984999 Standard 1-Hole Nozzle, 98029with Integral Check Valve,Tip = .10" dia. x .16" long
985002 Pencil Point Nozzle, 98029with Integral Check Valve, Tip = .08" dia. x .24" long
985003 Precision Nozzle, 98029with Integral Check Valve,Tip = .05" dia. x .20" long
985004 Extension Nozzle, 98029with Integral Check Valve,Tip = .10" dia. x .50" long
985001 Spreader Nozzle, 98029with Integral Check Valve,Tip = (0.08" x 0.25") sq. x0.47" long
Loctite® Brand Hot Melt Nozzles & AccessoriesProduct Item # Description Used With
98012 Cartridge Pre-Heater, 98011holds (2) 300 ml Cartridges
984261 Standard Adapter for 98011300 ml Cartridges
984262 Standard 1-Hole Nozzle, 980110.098" dia. Cone Tip, withIntegral Check Valve(includes protective cap)
984272 Injection Needle Nozzle, 98011with Integral Check Valve,Tip = .059" dia. x .197" long
984263 Adapter/Check Valve 98011for Specialty Nozzles
984264 Needle Jet Nozzle, 98011Tip = .051" dia. x 1.26" long(requires 984263 adapter)
984265 Diagonal Extension Nozzle, 98011Tip = .123" dia. x 1.276" long(requires 984263 adapter)
984266 Flat Spreader Nozzle, 98011Tip = (.084" x .177") sq. x1.237 long(requires 984263 adapter)
984267 2-Hole Nozzle, 98011.06" dia. x .39" spacing(requires 984263 adapter)
984268 3-Hole Nozzle, 98011.06" dia. x .20" spacing(requires 984263 adapter)
985243 Tool Hanger/Balancer All Hot Melt Hand Held
Applicators
985397 Air Line Filter, All Pneumatic Regulator, Gauge Applicators0-150 psi
985087 Heavy Duty Bench Top 98030, 98031,Metal Stand 98032, 98035,
98036, 98037,98040, 98041
For custom Loctite® brand hot melt dispense nozzles, contact the Henkel Special EquipmentGroup at 1-800-LOCTITE (562-8483).
For additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
DIS
PE
NS
ING
•
BU
LK H
OT
ME
LT S
YS
TE
MS
EQ
UIP
ME
NT
110
Dispensing Bulk Hot Melt SystemsHenkel’s Loctite® brand Hysol™ Bulk Hot Melt Dispensers offer highperformance control and reliability for all of your hot melt dispensingneeds. You can rely on Henkel to supply you with performance hotmelt adhesives as well as an array of standard high volume hot meltdispensing equipment. Henkel offers true one stop shopping for yourcomplete adhesive solution.These Hysol™ Bulk Hot Melt Systems come in three compact andeconomical sizes: 12, 14 and 34 lb. tank capacity (expandable to up to78 lbs. with optional tank hopper). All units feature internal systemdiagnostics which monitor the temperatures and system settings.
Loctite® Hysol™ Loctite® Hysol™ Loctite® Hysol™ Loctite® Hysol™ Loctite® Hysol™Bulk-12 System Bulk-12 System Bulk-14 System Bulk-14 System Bulk-34 System
115 VAC 230 VAC 115 VAC 230 VAC 230 VAC
Item Number 98131 98132 98133 98134 98135
Max. Dispense Rate 28 lbs./hr. (12.7 kg/hr.) 28 lbs./hr. (12.7 kg/hr.) 70 lbs./hr. (31.7 kg/hr.) 70 lbs./hr. (31.7 kg/hr.) 100 lbs./hr. (45.3 kg/hr.)
Max. Number of Hoses 1 1 2 2 4
Max. Length of all Hoses 16' 24' 32' 48' 72'
Standard Tank Capacity 12 lbs. (5.4 kg) 12 lbs. (5.4 kg) 14 lbs. (6.4 kg) 14 lbs. (6.4 kg) 34 lbs. (15.4 kg)
Optional Expanded Capacity – – 40 lbs. (18.2 kg) 40 lbs. (18.2 kg) 78 lbs. (35.4 kg)with Hopper Upgrade
Max. Melt Rate 12 lbs./hr. (5.4 kg/hr.) 12 lbs./hr. (5.4 kg/hr.) 28 lbs./hr. (12.7 kg/hr.) 28 lbs./hr. (12.7 kg/hr.) 75 lbs./hr. (34.1 kg/hr.)
Max. Temp Setting for Tank 395°F (202°C) 395°F (202°C) 395°F (202°C) 395°F (202°C) 395°F (202°C)
Max. Dispense Temperature 410°F (210°C) 410°F (210°C) 425°F (218°C) 425°F (218°C) 425°F (218°C)
Temperature Control Zones 3 3 5 5 9
Controls Analog Analog Digital Digital Digital
Available Dispense Patterns Extrude, Swirl Spray, Extrude, Swirl Spray, Extrude, Swirl Spray, Extrude, Swirl Spray, Extrude, Swirl Spray,Fan Spray, Cone Spray Fan Spray, Cone Spray Fan Spray, Cone Spray Fan Spray, Cone Spray Fan Spray, Cone Spray
Compatible Loctite® Hysol® EVA, Polyamide, EVA, Polyamide, EVA, Polyamide, EVA, Polyamide, EVA, Polyamide,Adhesives Polyolefin Polyolefin Polyolefin Polyolefin Polyolefin
Pump Pressure 0-300 psi 0-300 psi 0-300 psi 0-300 psi 0-300 psi
Dimensions, inches (cm) 15.5 x 10.5 x 20 15.5 x 10.5 x 20 20.1 x 12.1 x 23 20.1 x 12.1 x 23 22 x 14.25 x 27.5L x W x H (with open lid) (40 x 27 x 50) (40 x 27 x 50) (51.25 x 31 x 58.5) (51.25 x 31 x 58.5) (56 x 36.25 x 70)
Weight Empty 41 lbs. (18.6 kg) 41 lbs. (18.6 kg) 51 lbs. (23.2 kg) 51 lbs. (23.2 kg) 86 lbs. (39.0 kg)
System Power Consumption 1700 Watts 2780 Watts 2220 Watts 3860 Watts 6600 Watts
Melt Tank Power Consumption 900 Watts 1700 Watts 900 Watts 1700 Watts 3400 Watts
In any adhesive application, the accuracy of your dispense equipmentcan define the level of success of the process. Henkel offers a varietyof hand held or mountable applicators for the accurate dispensing ofyour spray or extrusion application. In addition, the appropriatedispensing controllers, timers, hosing, and nozzle accessories areavailable to complete your system. For additional information on these items, please call our TechnicalInformation group. In the U.S.A., call 1.800.LOCTITE (562.8483). In Canada, call 1.800.263.5043.
You can also visit us online at www.loctite.com.• Request our complete Loctite® Hysol™ Hot Melt Adhesive &
Equipment literature piece LT-3768. • Request a copy of our Equipment Sourcebook.• Or link to our equipment web site at
http://equipment.loctite.com/standardequipment.cfm. Check out or purchase all of your needed Bulk Hot Meltequipment choices.
For spare parts, accessories, and additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
DIS
PE
NS
ING
• CA
RT
RID
GE
SY
ST
EM
S &
SO
FT-SQ
UE
EZ
E B
OT
TLE
SE
QU
IPM
EN
T
111
Product Item # Description
9844698448
Roller Assembly, 1" wide bandRoller Assembly, 2" wide band
9844798449
Replacement Rollers, 1" wide (3 pk)Replacement Rollers, 2" wide (3 pk)
98128 Cartridge Dispense Tip. (10 pk)
98371Cartridge-Needle Adapter: Luer-Lokadapter for dispense needle attachment -see page 118, sold separately. (5 pk)
Dispensing Cartridge SystemsLoctite® brand Cartridge Dispensing Equipment provides effectivedispensing for a wide range of products packaged in 300 mlcartridges. Whether hand held or mounted, manual or pneumatic,these dispensers are designed to simplify your application ofadhesive or lubricant with minimal waste. Selection of a Loctite®
brand Cartridge Dispenser is based on product type, viscosity, and process requirements.
Loctite® Brand Cartridge Accessories
Product Item # Description
97215Cartridge-Syringe Adapter: Downloadingadapter for 10, 30 or 55 ml syringebarrels. (3 pk)
98181
Cartridge-Tube Fitting Adapter: Used for connecting tube fittings tocartridges (984832 or 984833 alsorequired and sold separately). (3 pk)
984832
984833
Tube Fitting: 1⁄4" male NPT x 1⁄4" feed tube. (10 pk)Tube Fitting: 1⁄4" male NPT x 3⁄8" feed tube.(10 pk)
Loctite® 300 ml Loctite® 300 ml Loctite® 300 ml Loctite® Industrial Loctite® Industrial Loctite® IndustrialPneumatic Cartridge Cartridge Pneumatic Cartridge Manual Grease Pneumatic Grease Cordless Electric
Dispenser Pusher Dispensing Retainer Dispenser Dispenser Grease Dispenser
Item # 97002 98022 98319 98431 98432 98433
Used to G, AG, LC G, AG, LC, S G, AG, LC, S GL GL GLDispense
Package 300 ml cartridges 300 ml cartridges 300 ml cartridges 300 ml cartridges 300 ml cartridges 300 ml cartridgesTypes & Sizes 250 ml tubes 250 ml tubes and all bulk containers and all bulk containers and all bulk containers
Viscosity Medium to High Medium to High Low to Medium High High HighRange
Type Pneumatic Pneumatic Pneumatic Manual Pneumatic 12 Voltwith Level Sensor
AG = Anaerobic Gasketing LC = Light Cure/Acrylics GL = Grease/LubricantsG = Gel Cyanoacrylates S = Silicones
For spare parts, accessories, and additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
DIS
PE
NS
ING
•
DIS
PE
NS
E S
YS
TE
MS
EQ
UIP
ME
NT
112
Dispensing Dispense SystemsLoctite® brand Dispense Systems provide effective dispensing of awide range of adhesive products in various package sizes. Withrobust and innovative designs, you can depend on these systemsfor accurate dispensing and long term reliability to meet yourdemanding manufacturing needs. Selection of the proper system isbased on the product being used, package size, and processrequirements.
Loctite® Loctite® Loctite® Loctite® Loctite® Loctite®
Bond-A-Matic® Bond-A-Matic® Shot Miser™ Loctite® Loctite® Press-Pak™ Analog Syringe Digital Syringe Loctite®
Dispenser Dispenser Dispense Dial-A-Seal® Pump-A-Bead™ II 1000 Dispensing Dispensing Foot Pedal0-15 psi 0-100 psi System Applicator Dispenser Dispenser System System Dispenser
Item # 982719 982722 98116 998400 986000 98006 98417* 97006* 98049/98050
Dispense DT, DR, B DT, DR, B DT, DR, B N/A B B DT, DR, B DT, DR, B DT, DR, BPatterns
Used To G, IA, LC, G, IA, LC, G, IA, LC, PS AG AG, G, IA, LC, G, IA, LC, G, IA, LCDispense RC, TL RC, TL RC, TL RC, TL RC, TL RC, TL
Package 250 ml bottle, 250 ml bottle, 250 ml bottle, 50 ml & 850 ml 1 liter 10 ml, 10 ml, 10 ml,Types 1 lb. bottle, 1 lb. bottle, 1 lb. bottle, 250 ml cartridges Press-Pak™ 30 ml, 30 ml, 30 ml,and 1 L bottle, 1 L bottle, 200 g squeeze tubes & containers 55 ml 55 ml 55 ml Sizes 2 kg bottle, 2 kg bottle, tube 1L bottle syringes* syringes* syringes*
200 g squeeze 200 g squeezetube tube
Viscosity Low Medium Low Medium High Medium Low to Low to Low to Range to High to Medium to High to High Paste Paste Paste
AG = Anaerobic Gasketing IA = Instant Adhesives *Syringe Air Line Adapter sold separately. See page 113 for more information.B = Beads LC= Light Cure/AcrylicsDR = Drops PS = Pipe SealantsDT = Dots RC = Retaining CompoundsG= Gel Adhesives TL = Threadlockers
Complete Bottle Reservoir Dispense Systems
Equipped with all components needed to dispense a wide range of products in a variety of adhesive bottle sizes.
Thread Sealant and Anaerobic GasketingDelivery Systems
These unique Loctite® brand systems are bothversatile and robustly engineered. Positive
displacement pumps or pneumatic air designsare utilized to ensure consistent application ofhigh viscosity thread sealant on pipe threads
and anaerobic gasket flange applications.
Syringe Dispensing SystemsPneumatic air pressure systems that
effectively dispense fine drop or beads ofadhesives packaged in syringe barrels.
Optional air line accessories andcomponents required are based on specific
syringe barrel size in use. See page 113.
For spare parts, accessories, and additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
DIS
PE
NS
ING
• DIS
PE
NS
E S
YS
TE
MS
AC
CE
SS
OR
IES
EQ
UIP
ME
NT
113
Loctite® Brand Syringe AccessoriesPRODUCT ITEM # DESCRIPTION CONTENTS
97208 10 ml Syringe Air Line Adapter 2 Air Line Adapters (syringe barrel sold separately)
97245 30 and 55 ml Syringe Air Line Adapter 2 Air Line Adapters (syringe barrel sold separately)
9811798118
3 ml Syringe Air Line Adapter and Filter10 ml Syringe Air Line Adapter and Filter
Adapter and FilterAdapter and Filter
97216 10 ml Syringe Starter Kit5 Caps5 Pistons4 Clear Barrels1 Black Barrel5 Tips1 Air Line Adapter
97294 30 ml Syringe Starter Kit
98416 55 ml Syringe Starter Kit
97207 10 ml Clear Syringe Barrel Kit 20 Barrel Caps, 40 Pistons, 40 Barrels, 40 Barrel Tips
97244 30 ml Clear Syringe Barrel Kit 10 Barrel Caps, 20 Pistons, 20 Barrels, 20 Barrel Tips
98314 55 ml Clear Syringe Barrel Kit 5 Barrel Caps, 10 Pistons, 10 Barrels, 10 Barrel Tips
97263 10 ml Black Syringe Barrel Kitfor UV Adhesives 20 Barrel Caps, 40 Pistons, 40 Barrels, 40 Barrel Tips
97264 30 ml Black Syringe Barrel Kitfor UV Adhesives 10 Barrel Caps, 20 Pistons, 20 Barrels, 20 Barrel Tips
98315 55 ml Black Syringe Barrel Kitfor UV Adhesives 5 Barrel Caps, 10 Pistons, 10 Barrels, 10 Barrel Tips
984650 Air Line Filter for Syringe Dispensing to prevent product back flow 1 Filter Assembly with 2 Hose Crimps
97215Cartridge-Syringe Adapter, fordownloading adhesive from 300 mlcartridges into syringe barrels
3 Syringe Filler Adapters1 Tube of Silicone Grease
984625 Syringe Stand for 10 and 30 ml syringe barrels
1 Stand(syringe barrel and air line adapter sold separately)
For additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
DIS
PE
NS
ING
•
CO
NT
RO
LLE
RS
& R
ES
ER
VO
IRS
EQ
UIP
ME
NT
114
Dispensing Controllers & ReservoirsLoctite® brand Controllers and Reservoirs can be used as the chiefcomponents, along with a selection of Loctite® brand parts andaccessories, or with your own parts to create a complete customdispensing system designed to meet your specific needs andmanufacturing goals. Selection of a Loctite® brand Controller and Reservoir is based on the adhesive or fluid being used, thepackage or container the adhesive or fluid is supplied in, and theoverall requirements of the manufacturing process. Loctite® brandValves and Pumps are sold separately.
Loctite® Loctite® Loctite® Loctite®
Integrated Semi-Automatic Integrated Semi-Automatic Bond-A-Matic® 3000 Bond-A-Matic® 3000Controller 0-100 psi Controller 0-15 psi Reservoir 0-15 psi Reservoir 0-100 psi
Item # 97007/97017* 97010/97020* 982720*/982726 982723*/982727
Dispense DT, DR, B DT, DR, B DT, DR, B DT, DR, BPatterns
Used To G, IA, LC, RC, TL G, IA, LC, RC, TL G, IA, LC, RC, TL G, IA, LC, RC, TLDispense
Package 250 ml bottle, 1 lb. bottle, 250 ml bottle, 1 lb. bottle, 250 ml bottle, 1 lb. bottle, 250 ml bottle, 1 lb. bottle,Types and 1 L bottle, 2 kg bottle, 1 L bottle, 2 kg bottle, 1 L bottle, 2 kg bottle, 1 L bottle, 2 kg bottle,Sizes 200 g squeeze tube 200 g squeeze tube 200 g squeeze tube 200 g squeeze tube
Viscosity Use (cP) Medium to High Low to Medium Low to Medium Medium to High
* With Low Level Sensor.
Loctite® Loctite® Loctite®
2.25 gal Bottle Shot Miser™ 4 Liter Gravity Reservoir Reservoir Feed Reservoir
Item # 98359 98090 982880
Used To G, IA, LC, RC, TL G, IA, LC, RC, TLDispense RC, TL
Package 250 ml, 1 lb., 1 L, 250 ml bottle, –Types and 2 kg bottles, 1 lb. bottle,Sizes 200 g 200 g
squeeze tube squeeze tube
Viscosity Low to Low to Low to Use (cP) High High Medium
AG = Anaerobic Gasketing DR = Drops G= Gel Adhesives LC= Light Cure/Acrylics RC = Retaining CompoundsB = Beads DT = Dots IA = Instant Adhesives PS = Pipe Sealants TL = Threadlockers
Loctite® Loctite® Loctite®
Digital Single Channel Loctite® Digital Shot Miser™Dispense Automatic Multi-Function Valve Controller Controller Controller Controller
Item # 98023 97123 98024 98079
Independent 1 1 3 1Channels
Number of 1 2 (dependent) 3 (independent) 1Dispense Valves
Advancing – 97118 - 50 mm 984691 - 50 mm _Slide 97119 - 100 mm
Rotospray – 97115 In conjunction with _ Positive Displacement
Pump – 983330
For spare parts, accessories, and additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
DIS
PE
NS
ING
• VALV
ES
– HA
ND
HE
LDE
QU
IPM
EN
T
115
Dispensing Valves – Hand HeldLoctite® brand Hand Held Dispensing Valves are used whereergonomic design for hand dispensing of fluids is desired.Designed for use with Loctite® brand Controllers andReservoirs, these hand held valves utilize passive wettedcomponents for universal compatibility with many fluids.Selection of a Loctite® brand Hand Held Valve is based on thedesired dispensing controls, the dispense principal of thedelivery system, and other process requirements.
Loctite® Loctite® Loctite® Loctite® Loctite®
Hand Held Applicator Hand Held Applicator Hand Held Applicator LV Hand Held Applicator Vari-Drop™ Applicator
Item # 97111 97112 97116 97130 97132
Dispense Control Manual Pneumatic Pneumatic Pneumatic Manual
Viscosity (cP) Low to Medium Low to Medium Low to Medium Low Low to Medium
Dispense Patterns DR, DT, B DR, DT, B DR, DT, B DR, DT, B DR, DT, B
Used to Dispense IA, LC, RC, TL IA, LC, RC, TL IA, LC, RC, TL IA, RC, TL IA, LC, RC, TL
Valve Type Manual P/T P/T P/T Manual
Suck-Back Yes Yes Yes No No
Stroke Adjustment No No No Yes No
Finger/Foot Actuated Finger Foot Finger Foot Finger
Wetted Components Acetal, PTFE, Acetal, PTFE, Acetal, PTFE, PTFE PTFEPTFE Coated Metal PTFE Coated Metal PTFE Coated Metal
Accelerators ● ● ● ● ●
Acrylics ● ● ● ● ●
Activators ● ● ● ● ●
Anaerobics ● ● ● ● ●
Cyanoacrylates ● ● ● ● ●
Inks ● ● ● ● ●
Oils ● ● ● ● ●
Paints ● ● ● ● ●
Primers ● ● ● ● ●
Reagents ● ● ● ● ●
Solvents ● ●
UV & Light Cure Fluids ● ● ● ● ●
UV Anaerobics ● ● ● ● ●
Water ●
B = Bead DT = Dot LC = Light Cure/Acrylics RC = Retaining CompoundsDR = Drop IA = Instant Adhesives P/T = Pressure Time Dispense TL = Threadlockers
Fluid Compatibility Selector Chart
For spare parts, accessories, and additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
DIS
PE
NS
ING
•
VA
LVE
S/P
UM
PS
EQ
UIP
ME
NT
116
Loctite® Loctite® Loctite® Loctite® Loctite® Loctite® Loctite® Positive Loctite®
Stationary Diaphragm Light Cure Cyanoacrylate Micro Needle Shot Miser™ Displacement PoppetApplicator Valve Valve Dispense Valve Dispense Valve Valve Dispense Valve Pump Valve
Item # 97113/97114 97135/97136 98009 98013 98084 98085 983330 986300/983914
Viscosity Low to Low to Low to Low to Low to Low to Medium Medium to Range Medium Medium Medium Medium Medium Medium High
Dispense DT, DR, B DT, DR, B DT, MD, DT, MD, DT, MD, DT, DR, B DR B, DRPatterns DR, B DR, B DR, B
Used to IA, RC, TL, G IA, RC, LC, RC, TL IA, RC, LC, RC, TL IA, RC, TL, RC AG, TL, RCDispense TL, LC TL, G TL, G
Suck-Back Yes No No No No No No Yes
Adjustable Yes No Yes Yes Yes No Yes YesStroke
Valve Type P/T P/T P/T P/T P/T P/T P/D P/T
Wetted Acetal, Acetal, Stainless Acetal, UHMW Acetal, PTFE, PTFE Acetal, Stainless AcetalComponents PTFE Coated Steel, PTFE UHMW Stainless Steel Steel, PTFE
Metals Coated Metals Coated Metals
Inlet 1⁄4" OD/3⁄8" OD 1⁄4" OD/3⁄8" OD 1⁄8" NPT 1⁄8" NPT 1⁄4" NPT 1⁄4" NPT 3⁄8" OD 3⁄8" OD
Outlet 1⁄4" UNF 1⁄4" UNF 1⁄4" UNF 1⁄4" UNF 1⁄4" UNF 1⁄4" UNF 1⁄4" OD 986300: Bayonet or Luer-Lok Tip Luer-Lok Tip Luer-Lok Tip Luer-Lok Tip Luer-Lok Tip Luer-Lok Tip 1⁄4" NPT
983914: Bayonet or1⁄8" NPT forLuer-Lok Tip
B = Bead IA = Instant Adhesives P/T = Pressure Time DispenseDR = Drop LC = Light Cure/Acrylics RC = Retaining CompoundsDT = Dot MD = Microdots TL = ThreadlockersG = Gel Instant Adhesives P/D = Positive Displacement
Dispensing Valves/PumpsLoctite® brand Dispensing Valves and Pumps are value-added,robust, dispensing valves for adhesive or fluid delivery. Each valveis uniquely designed to meet different manufacturing needs. Thesevalves should be combined with a reservoir and/or a controller.Selection of a Loctite® brand Valve or Pump is based on thechemistry and viscosity of the adhesive or fluid being used andprocess requirements.
For spare parts, accessories, and additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
DIS
PE
NS
ING
• VALV
ES
/PU
MP
SE
QU
IPM
EN
T
117
Item # 97113/ 97135/ 98009 98013 98084 98085 983330 986300/97114 97136 983914
Accelerators ● ● ●
Acrylics ● ● ● ● ● ●
Activators ● ● ●
Anaerobics ● ● ● ● ● ● ● ●
Cyanoacrylates ● ● ●
Gasketing ●Anaerobics
Non-Abrasive ●Greases
Inks ● ● ● ● ● ●
Lubricants ●
Oils ● ● ● ● ● ●
One-Part ● ●Epoxies
Paints ● ● ● ● ● ●
Primers ● ● ●
Reagents ● ● ●
Solvents ● ● ●
UV & Light ● ● ● ● ●Cure Fluids
UV Anaerobics ● ● ● ● ●
Water ● ● ● ● ●
Loctite® Brand Valves & Pumps Fluid Compatibility Selector Chart
For additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
DIS
PE
NS
ING
•
DIS
PE
NS
E T
IPS
EQ
UIP
ME
NT
118
Dispensing Dispense TipsHenkel offers a comprehensive line of Loctite® brand dispense tips whichinclude high precision stainless steel, tapered polyethylene, and flexiblepolypropylene tips. All feature a positive locking helical thread design toensure the tip will stay intact during the toughest applications. For yourless critical applications, we offer more economical general purpose tipsthat still provide reliable and consistent dispensing shot after shot.
50 packItem #9827297221972229722397224
1000 packItem #9827398061980629806398064
Tip Color/GaugeTan/14Grey/16Green/18Pink/20Blue/22
11⁄4" Polyethylene Tapered Tips
50 packItem #97229972309723197232
1000 packItem #98069980709807198082
Hub Color/Gauge
Amber/15Green/18 Pink/20Red/25
11⁄2" Flexible Polypropylene TipsHelical Thread
Item # DescriptionSS, PTFE Lined, 25 Gauge, 50/1000 pk
Luer-Lok Adapter Kit, 20 Luer-Loks and 5 Adapters Formable Dispense Tip, 21 Gauge,50/1000 pk
Tip Caps, 50 pk
High Density Polyethylene, 15 Gauge,White, 50/1000 pk
Vari-Drop™ Applicator Brushes, 10 pk
2 each of a variety of Helical Threaded1⁄2" SS, Taper Tip, and Polypropylene Tips
50 packItem #98196981989820098114
1000 packItem #98197981999820198115
Hub Color/Gauge
Green/18Pink/20
Purple/21Yellow/32
1⁄4" Stainless Steel TipsHelical Thread
50 packItem #981639816598167981699817198173981759817798179
1000 packItem #981649816698168981709817298174981769817898180
Hub Color/Gauge
White/14Amber/15Green/18Pink/20
Purple/21Blue/22
Orange/23Red/25
Light Grey/27
11⁄2" Stainless Steel TipsHelical Thread
50 packItem #982369824098244982489825298256982609826498268
1000 packItem #982379824198245982499825398257982619826598269
Hub Color/Gauge
White/14Amber/15Green/18Pink/20
Purple/21Blue/22
Orange/23Red/25
Light Grey/27
45 Degree x 1⁄2" Stainless Steel Tips - Helical Thread
50 packItem #98194982029820498206
1000 packItem #98195982039820598207
Hub Color/Gauge
Olive/14Red/25Clear/27
Lavender/30
5⁄16" Stainless Steel TipsHelical Thread
50 packItem #982389824298246982509825498258982629826698270
1000 packItem #982399824398247982519825598259982639826798271
Hub Color/Gauge
White/14Amber/15Green/18Pink/20
Purple/21Blue/22
Orange/23Red/25
Light Grey/27
90 Degree x 1⁄2" Stainless Steel Tips - Helical Thread
50 packItem #98396983989840098424984029840498104
1000 packItem #98397 983999840198425984039840598105
Hub Color/Gauge
Amber/15Green/18Pink/20
Purple/21Blue/22Red/25
Lavender/30
1⁄2" Stainless Steel TipsHelical Thread
High Precision Stainless Steel Dispense Tips
Tapered Dispense Tips
50 packItem #9838598387983899839198393
1000 packItem #98386 983889839098392 98394
Hub Color/Gauge
White/14Grey/16Green/18Pink/20Blue/22
11⁄4" Polyethylene Tapered Tips Helical Thread & UV Light Block Additive
General Purpose Dispense Tips
50 packItem #982089722597226972279821098100982129722898214
1000 packItem #982099806598066980679821198080982139806898215
Hub Color/Gauge
Olive/14Amber/15Green/18Pink/20
Purple/21Blue/22
Orange/23Red/25Clear/27
1⁄2" Stainless Steel Tips
97238/98073
97233
97509/97510
97248
97261/98074
998390
97262
50 packItem #982169821898222982249822698228982309823298234
1000 packItem #982179821998223982259822798229982319823398235
1" Stainless Steel TipsHelical Thread
Hub Color/Gauge
White/14Amber/15Green/18Pink/20
Purple/21Blue/22
Orange/23Red/25
Light Grey/27
The Loctite® Showcase NeedleVariety Kit contains 5 each ofan assortment of high precisionStainless Steel tips in variouslengths and gauges. Taperedand Flexible Dispense Tips arealso included. All dispense tipshave helical thread luer-lokhubs for reliable locking.Item # 98439
Flexible Dispense Tips
For additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
Additional Dispense Tipsand Accessories
DIS
PE
NS
ING
• MO
NIT
OR
ING
SY
ST
EM
SE
QU
IPM
EN
T
119
Dispensing Monitoring SystemsThese state-of-the-art detection systems allow real time processmonitoring of dispense cycles. Whether you’re looking todetermine the presence of adhesive via fluorescence detection,or the amount of adhesive dispensed for an individual dispensenozzle, Henkel has the system that will get the job done with ahigh degree of precision and reliability.
Loctite® Fluid WaveformAnalyzer, Signature SeriesThese state-of-the-art fluiddetection systems are usedwhere high quality productionand data inspection are desired.They use “real time” dataacquisition to detect plugged andbroken dispense nozzles, nozzlevoids, no dispense, low or highpressure, and air bubbles. Data acquisition can be storedlocally or to a LAN. Fluid Waveform Analyzers areavailable in a range of price and performance options tomeet specific dispensing process requirements.
AvailabilityLoctite® brand Fluid Waveform Analyzers are availablethrough our Custom Equipment group in a range of priceand performance options, custom configured to meetyour specific requirements. For more information, contact the Henkel Technical Information Department at 1-800-LOCTITE (562-8483).
Loctite® Fluorescence Detector Designed for the detection of fluorescentadhesives, this unit connects to an in-house power supply and PLC formonitoring of dispense processes utilizingfluorescent adhesives and sealants. Threeinterchangeable lenses are available forvarious detection distances. A 100,000hour LED life ensures consistent and long-term process monitoring.
Item # Description98083 Fluorescence Detector98101 Lens for 50 mm detection distance98102 Lens for 9 mm detection distance98103 Lens for 28 mm detection distance986091 4 wire-conductor cable with M12 connector
RequiredAccessories(Sold Separately)
Item # Description
Sensor Cable 8965008 Pressure sensing cable for dispense valve interface
Valve Adapter 97200 Valve body adapter for Loctite® dispense valves98009, 98013
Valve Adapter 97295Valve body adapter for Loctite® dispense valves97113, 97114
Controller 97123 Provides dispense control and tolerance monitoring
For spare parts, accessories, and additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
Loctite® In-Line Flow MonitorThe Loctite® brand In-Line Flow Monitor, Item number 97211, when integrated with the Loctite® brand Single Channel Automatic Controller, Item number 97123, can provide an economical approach to adhesive dispense monitoring. Pressure changes due to air entrapment, broken or blocked nozzles, or substrate contact can be effectively monitored by the system with a high degree of accuracy and repeatability. All out of tolerance dispense cycles result in error messages being displayed on the controller display.
MO
TIO
N C
ON
TR
OL
DIS
PE
NS
E S
YS
TE
MS
•
RO
BO
TS
EQ
UIP
ME
NT
120
Motion ControlDispense SystemsRobotsAvailable in both Benchtop and SCARA model types, Loctite® brandRobots are designed to simplify the dispensing of adhesives andsealants onto complex surface configurations. They allowmanufacturers to repeatedly and reliably dispense patterns of liquidmaterial on a programmed basis, resulting in improved processefficiencies, minimal material waste, and reduced production costs.
Robot TypesBenchtop robots are beam or gantry stylerobots designed to be placed on a bench.These robots carry one or more parts thatare captured in a fixture that is mountedon the work surface.
SCARA is an acronym for SelectiveCompliance Assembly Robot Arm. Therobot is a multi-jointed arm that movesabove the work surface.
Loctite® 200 Series Benchtop RobotPart No. Description98279 200 x 200 mm, 3 axis, 110 V98280 200 x 200 mm, 3 axis, 100 V CE Rated98281 200 x 200 mm, 3 axis, 220 V98282 200 x 200 mm, 3 axis, 220 V CE Rated98283 200 x 200 mm, 4 axis, 110 V98284 200 x 200 mm, 4 axis, 100 V CE Rated98285 200 x 200 mm, 4 axis, 220 V98286 200 x 200 mm, 4 axis, 220 V CE RatedLoctite® 300 Series Benchtop Robot98287 300 x 320 mm, 3 axis, 110 V98288 300 x 320 mm, 3 axis, 100 V CE Rated98289 300 x 320 mm, 3 axis, 220 V98290 300 x 320 mm, 3 axis, 220 V CE Rated98291 300 x 320 mm, 4 axis, 110 V98292 300 x 320 mm, 4 axis, 100 V CE Rated98293 300 x 320 mm, 4 axis, 220 V98294 300 x 320 mm, 4 axis, 220 V CE Rated
Loctite® 400 Series Benchtop RobotPart No. Description98295 400 x 400 mm, 3 axis, 110 V98296 400 x 400 mm, 3 axis, 100 V CE Rated98297 400 x 400 mm, 3 axis, 220 V98298 400 x 400 mm, 3 axis, 220 V CE Rated98299 400 x 400 mm, 4 axis, 110 V98300 400 x 400 mm, 4 axis, 100 V CE Rated98301 400 x 400 mm, 4 axis, 220 V98302 400 x 400 mm, 4 axis, 220 V CE RatedLoctite® S440 Series SCARA Robot98303 SCARA, 440 mm, 3 axis, 110 V98304 SCARA, 440 mm, 3 axis, 100 V CE Rated98305 SCARA, 440 mm, 3 axis, 220 V98306 SCARA, 440 mm, 3 axis, 220 V CE Rated98307 SCARA, 440 mm, 4 axis, 110 V98308 SCARA, 440 mm, 4 axis, 100 V CE Rated98309 SCARA, 440 mm, 4 axis, 220 V98310 SCARA, 440 mm, 4 axis, 220 V CE Rated
Robot Configurations
Robot Selector Chart
Loctite® 200 Series Loctite® 300 Series Loctite® 400 Series Loctite® S440 Series
Type Benchtop Benchtop Benchtop SCARANumber of controllable axes 3 to 4 3 to 4 3 to 4 3 to 4
Range of operation
X axis 200 mm 300 mm 400 mm Arm 1: 260 mm ± 90°Y axis 200 mm 320 mm 400 mm Arm 2: 180 mm ± 150°Z axis 50 mm 100 mm 150 mm 100 mmR axis ± 360° ± 360° ± 360° ± 360°
Portable weightWork Surface 7.0 kg 11.0 kg 11.0 kg N/ATool Head 3.5 kg 6.0 kg 6.0 kg 5.0 kg
SpeedPTP = Point-to-Point. This isused for dot dispensing.CP = Continuous Path. Thisis used for bead dispensing.
PTP (X,Y) 5 - 500 mm/s 8 - 800 mm/s 8 - 800 mm/s 15 - 1500 mm/sPTP (Z) 2.5 - 250 mm/s 3.2 - 320 mm/s 3.2 - 320 mm/s 3.2 - 320 mm/sPTP (R) 6 - 600 °/s 8 - 800 °/s 8 - 800 °/s 10 - 1,000 °/sCP (X,Y) 0.1 - 500 mm/s 0.1 - 800 mm/s 0.1 - 800 mm/s 0.1 - 800 mm/sCP (Z) 0.1 - 250 mm/s 0.1 - 800 mm/s 0.1 - 800 mm/s 0.1 - 800 mm/s
Repeatability accuracyX, Y, Z axis ± 0.01 mm ± 0.01 mm ± 0.01 mm ± 0.02 mmR axis ± 0.02° ± 0.02° ± 0.02° ± 0.02°
Program capacity 100 programs 100 programs 100 programs 100 programsData memory capacity 6,000 points 6,000 points 6,000 points 6,000 points
Dimensions
Width 320 mm 560 mm 584 mm 290 mmDepth 377 mm 529 mm 629 mm 773 mmHeight, 3 axis 536 mm 649 mm 799 mm 840 mmHeight, 4 axis 655 mm 840 mm 890 mm 840 mm
Weight 18 kg 35 kg 42 kg 41 kg
Power source 110 or 220 V, 50-60 Hz 110 or 220 V, 50-60 Hz 110 or 220 V, 50-60 Hz 110 or 220 V, 50-60 Hz
For spare parts, accessories, and additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
MO
TIO
N C
ON
TR
OL D
ISP
EN
SE
SY
ST
EM
S • D
ISP
EN
SE
STA
TIO
NS
EQ
UIP
ME
NT
121For additional equipment information, and to see the full line of accessories to complete your robotic dispense system, reference the Loctite® EquipmentSourcebook or visit www.equipment.loctite.com.
Loctite® Advancing SlideDispense Station
Loctite® Single RotaryDispense Station
Loctite® Dual RotaryDispense Station
Item # 98426 98427 98428
Dispense PatternDots or Potting Circles, Arcs and/or Dots in a
Circular PatternCircles, Arcs and/or Dots in a
Circular Pattern
Number of Dispense Points 1 1 2
Minimum Dispense Time 0.1 sec 0.01 sec 0.01 sec
Adjustable Valve Angle Yes Yes Yes
Slide Stroke 0-2" 0-2" 0-2"
Fluid Pressure Regulation 0-90 psi 0-90 psi 0-90 psi
Maximum Part Size1 N/A 8.5" Diameter 4" Diameter at 90°6" Diameter at 45°
Maximum Part Height1 12" 12" 8"
Weight Capacity2 N/A 30 lbs. 30 lbs.
Rotating Speed N/A 0.1-100 RPM 0.1-100 RPM
Programming 4 Adjustable RangeAnalog Timers
Multi-line Digital Control Panelwith User Friendly Prompts
Multi-line Digital Control Panelwith User Friendly Prompts
Program Capacity N/A 10 Programs, 20 Events per Program
10 Programs, 20 Events per Program
Dimensions
Width 12" 14" 14"
Depth 12" 10" 10"
Height 21" 22" 21"
Weight 25 lbs. 26 lbs. 25 lbs.
Power Source 110 or 220 VAC/50-60 Hz 110 or 220 VAC/50-60 Hz 110 or 220 VAC/50-60 Hz
1 – The maximum part sizes are estimates and can vary depending on the specific part configuration and the size of the dispense syringe, cartridge orvalve used.
2 – The weight capacity of the rotary station can vary depending on the center of gravity of the part and the program’s rotating speed and acceleration. 30 lb. was provided as a general indicator of the motor’s capacity. At weights in this range the equipment should be evaluated to confirm performance.
Motion ControlDispense SystemsDispense StationsWhen a circular dispense pattern or an advancing dispense valve is required, Loctite® brand Motion Control Systems offer robustperformance at a lower cost than robotic dispense stations. They are simple to set up and operate and their rugged construction makes them well suited for harsh manufacturing environments.
FUM
E F
ILT
RA
TIO
N S
YS
TE
MS
EQ
UIP
ME
NT
122
Fume Filtration Benchtop FumeFiltration SystemsBenchtop Fume Filtration Systems, 98277 (with arm) and 98278(without arm), are designed to remove dust particulate and fumesemitted by adhesives, sealants, cleaning solvents, and otherchemicals. The compact systems offer flexible operation in a smallspace and match the airflow of many larger systems. The benchtopsystems feature quiet operation and a bi-colored LED light toindicate blocked filters. The units can be operated as an openplenum for a working area up to 12" wide or can easily beconverted into an arm system for more direct fume capture. The 2" x 24" flexible arm can be positioned to be unobtrusive to theoperator, yet provide effective air filtration. The units are equippedwith a Deep Bed Activated Carbon Fume Filter. HEPA/Carbon Filtersare available separately.
Features• High airflow rates• Runs quietly• LED light indicates blocked filter• Efficient arm or plenum applications provide flexibility• Compact, space-saving footprint• UL, CSA, and CE compliant
Fume Filtration SystemsThese Fume Filtration Systems are ideal for providing fumeextraction at the workplace. The systems quietly remove the fumesaway from the operator and filter the air. These freestanding unitsoffer location flexibility and significantly reduced cost versus fixedsystems. The systems are available in three different versions: a115 V, 60 Hz version (98274); a 230 V, 50 Hz version (98275); andan explosion-proof version (98276) for the extraction of flammablegases in larger quantities. Each unit features a large 14" x 18" filter,which reduces the frequency of filter replacements. A differentialpressure gauge allows the operator to monitor filter status. Eachsystem can be used with up to 4 exhaust arms (987351) or 2exhaust cabinets (987354) for fume capture, both sold separately.All units are equipped with a Deep Bed, 20 lbs. Activated CarbonFume Filter. A HEPA filter is available separately.
Features• High airflow rates• Runs very quietly• Large filter size
extends filter life span• Multi-stage filtration• Connects 1 to 4 exhaust hoses or exhaust cabinet• Compact size, unit fits under workbench• Filter status indicator• Thermal overload protection
Technical SpecificationsItem # 98274 Item # 98275 Item # 98276 Item # 98277 Item # 98278
Air inlet ports 2 x 2.5" dia. & 2 x 4" dia. 2 x 2.5" dia. & 2 x 4" dia. 2 x 2.5" dia. & 2 x 4" dia. 2" dia. x 24" long 12" plenumFan capacity 700 cfm 350 cfm 700 cfm 50 cfm 50 cfmSystem capacity 200 cfm 264 cfm 200 cfm 50 cfm 50 cfmMaximum static pressure 3.5 inches of water 5.0 inches of water 3.5 inches of water 5 inches of water 5 inches of waterPower supply 115 V, 60 Hz 230 V, 50 Hz 115 V, 60 Hz 90-264 V, 50-60 Hz 90-264 V, 50-60 HzMotor rating 0.75 HP/ 560 Watt 0.25 HP/ 250 Watt 0.75 HP/ 560 Watt 0.11 HP/ 85 Watt 0.11 HP/ 85 WattPower consumption 10 Amps 1.5 Amps 10 Amps 1 Amp 1 AmpNoise level, approx. 60 dBA 58 dBA 60 dBA 55 dBA 55 dBADimensions (W x D x H) 15.5" x 19.5" x 27" 15.5" x 19.5" x 27" 15.5" x 19.5" x 27" 12" x 13.5" x 11.75" 12" x 10.5" x 11.75"Weight 105 lbs. 105 lbs. 105 lbs. 15.4 lbs. 14.3 lbs.
Power On/off switch with power indicator light
On/off switch with power indicator light
External on/off foot switch
On/off switch withpower indicator light
On/off switch withpower indicator light
Approvals UL, CSA CE UL, CSA UL, CSA, CE UL, CSA, CE
For additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
LIGH
T C
UR
E • LE
D C
UR
E S
YS
TE
MS
EQ
UIP
ME
NT
123
Light Cure LED Light SourceHenkel has introduced the new Loctite® 7700 Hand Held LEDLight Source, Item # 98418. This high power hand held lightsource is capable of curing a variety of UV/Visible adhesives ina matter of seconds. With the focused nature of this system’sspectral output, IR output is negligible and part assemblyheating is virtually eliminated. Compact size and rechargeablebattery operation provide extensive use flexibility for even themost crowded or hard to reach locations.
Product Features• Contains a high powered LED point light source –
Typical 0.5 W/cm2*• Emits light primarily in the visible light range• Instant On/Off • Can be operated while recharging • Virtually no part assembly heating
Tested Loctite® Light Cure Adhesives: Cured Tack Free• 3105™ (3311™) • 3926™• 3106™ (3321™) • 3944™• 3107™ (3341™) • 3971™• 3525™ • 3972™• 3922™ • All Loctite® Flashcure®
• 3924™ Light Cure Adhesives
Technical SpecificationsDimensions: 9" L x 1" W x 3⁄4" HWeight: 0.44 lbs.Light Source: High powered LEDUtilities: Battery powered or 110 V, 60 HzTypical Output*: 0.5 W/cm2
Spectral Output Range: 390-420; Primary Peak 405 nm
*Exact output measurement is dependent on the brand and calibrationmethod of the meter used. These measurements were made with a Loctite® 7011-V at a distanceof 0.25"
Accessories Sold Separately
Spectral Output of Loctite® 7700
Hand Held LED Light Source
Rel
ativ
e Ir
rad
ian
ce
0
0.02
0.04
0.06
0.08
0.10
380 390 400 410 420 430
nm
Item # Description97210 UV Safety Glasses 98419 AC Battery Charger 98089 ZETA® 7011-V Dosimeter 98440 Foot Switch98443 Control Timer 98442 Remote Mount Heat Sink 988774 Constant-On Plug
For additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
EQ
UIP
ME
NT
124
LIG
HT
CU
RE
•
WA
ND
SY
ST
EM
S
Light CureWand SystemsLoctite® brand ZETA® Light Cure Wand Systems are used for thecontinuous or batch processing of assemblies that require curing insmall areas. These cost effective systems provide a variety of curingattributes. Selection of a Loctite® brand ZETA® Wand System isbased on the required lamp intensity and the number and length ofthe light guides needed.
Loctite® Loctite® Loctite® ZETA® 7750 ZETA® 7735 UV ZETA® 7740 UV ProgrammableWand System Wand System UV Wand System
Item # 98317A 98157A 98046
Useful Curing Diameter 1⁄4" to 1" 1⁄4" to 1" 1⁄4" to 1"
Number of Light None* None* None*Guides Supplied
Lamp Type 50 Watt High Pressure 100 Watt High Pressure 100 Watt High PressureMercury Arc Mercury Arc Mercury Arc
Output Intensity High High High
Maximum Light Power 5-7 W/cm2 9-11 W/cm2 9-11 W/cm2
Intensity Programming No No Yes**
Optimized Spectral UVA, B, C UVA, B, C UVA, B, COutput Range
Spectral Wavelength 250-410 nm 250-410 nm 250-410 nm
Replacement Bulb 98339 - Lamp/Reflector 984818 - Lamp/Reflector 984818 - Lamp/Reflector (Item # - Type) Module, 50 W (HPMA) Module, 100 W (HPMA) Module, 100 W (HPMA)
*Light guides sold separately.
Note: The Dual Wand Balancing Adaptor, Item 985045, is required if purchasing the Dual Light Guide, Item 983684, for the first time.
See page 129 for Loctite®
brand UV Light Meters to
measure spectral output.
Light Guides 983677983684983800985045
98317A, 98157A, 9804698317A, 98157A, 9804698317A, 98157A, 9804698317A, 98157A, 98046
Single Light Guide, 1 m long x 5 mm diameter Dual Light Guide, 1 m long x 3 mm diameter (See Note)Single Light Guide, 1.5 m long x 5 mm diameter Dual Wand Adapter Kit (See Note)
P R O D U C T Item Number Description For Use With
Time
Constant Irradiance
Time
Step Cure -ShutterClosed Between
Steps
Time
Step Cure -Shutter Open
Between Steps
**Cure Profile Examples for the Loctite® ZETA® 7750 Programmable UV Wand System - 98046
For additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
Light CureFlood SystemsLoctite® brand Flood Systems are modular low and mediumintensity ultraviolet and high intensity visible light emitting unitsdesigned for the batch curing of light curing adhesives andcoatings. Selection of a Loctite® brand Flood System is based onthe required intensity of light and cure area.
Loctite® ZETA® 7411-S Loctite® ZETA® 7500 Loctite® ZETA® 7420UV Flood System Portable UV Spot Lamp Visible Light Flood System
Item # 98413 980127 98060
Useful 8" x 8" 1" x 1" 12" x 12" typicalCure Area
Lamp Type Metal halide Fluorescent Visible Arc Lamp
Output Medium Low HighIntensity
Lamp 400 W 100 W 1,500 WPower
Optional Shutter 98420 – –Assembly
Optimized Spectral UVA UVA Visible Blue and GreenOutput Range
Optional Visible Light Enhanced – –Bulb Types Metal Halide
Replacement Bulbs 97246 - UV Lamp 982033 - Mercury Vaper Bulb, 110 W 985940 - Visible Arc(Item # - Type) 983050* - Visible Lamp Lamp, 1,500 W
Replacement 988159 – –Filter Glass
*Optional
(Shown withOptional ShutterAssembly - Item 98420)
EQ
UIP
ME
NT
125
LIGH
T C
UR
E • FLO
OD
SY
ST
EM
S
For additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
For proper eye protection,
use Loctite® brand ultraviolet
safety glasses,
Item No. 97210
LIG
HT
CU
RE
•
CU
RE
CO
NV
EY
OR
SE
QU
IPM
EN
T
126
Light Cure Cure ConveyorsLoctite® brand Cure Conveyors are used for continuous or batchprocessing of assemblies. Each conveyor has a unique set offeatures designed to meet the challenges of bench top curing oflight curing adhesives and coatings. Selection of a Loctite® brandCure Conveyor is based on the part size, required lamp for optimumcure, and whether the need for additional bulb types exists.
Loctite® ZETA® 7415 UV Loctite® ZETA® 7600 UVBenchtop Conveyor Benchtop Conveyor
Item # 98003 980550
Useful 6" x 6" 51⁄2" x 51⁄2"Cure Area
Lamp Type See footnote* Medium Pressure Mercury Arc
Output High* HighIntensity
Maximum Part 3" H x 71⁄2" W 31⁄2" H x 6" WCross-Section
Lamp 1,800 W* 1,800 WPower
Optimized Spectral UVA, B, C* UVA, B, COutput Range
Optional D, V, H, H+ –Bulb Types
Replacement Bulbs See footnote* 983091 - 6" UV Bulb(Item # - Type)
* The lamp assembly is sold separately; see the Light Sources and Power Supplies section on page 127 for more details.
See page 129 for Loctite®
brand UV Meters to measure
spectral output.
For additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
EQ
UIP
ME
NT
127
LIGH
T C
UR
E • LIG
HT
SO
UR
CE
S &
PO
WE
R S
UP
PLIE
S
Light Cure Light Sources & Power SuppliesLoctite® brand Light Sources and Power Supplies provide highintensity ultraviolet light for curing light cure adhesives andcoatings. These units are designed for use with a Loctite® brandConveyor System or for integration into an assembly processwhere the customer provides the necessary shielding. Selection ofa Loctite® brand Light Source and Power Supply is based on thebulb type, electrical requirements, and the desired part movement.
Fusion 208V Lamp Assembly Fusion 240V Lamp Assembly Loctite® High Intensity and Power Supply and Power Supply UV Source
Item # 98004 98005 980160
Useful Set-Up Dependent Set-Up Dependent Set-Up DependentCure Area
Lamp Type Electrodeless Fusion H Electrodeless Fusion H Medium PressureMercury Arc
Output High High HighIntensity
Lamp 1,800 W 1,800 W 1,500 WPower
Optimized Spectral UVA, B, C UVA, B, C UVA, B, COutput Range
Optional D, V, H+ D, V, H+ –Bulb Types
Replacement Bulbs 983471 - H Bulb 983471 - H Bulb 980161 - 5" UV Bulb(Item # - Type) 983469* - D Bulb 983469* - D Bulb
983470* - V Bulb 983470* - V Bulb
*Optional
For additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
For proper eye protection,
use Loctite® brand ultraviolet
safety glasses,
Item No. 97210
EQ
UIP
ME
NT
128
LIG
HT
CU
RE
•
CU
RE
CH
AM
BE
RS
For additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
Loctite® ZETA® 7215 Loctite® ZETA® 7401 UV Chamber UV Chamber
Item # 98081 (formerly 98007) 98039
Useful Cure Area 6" x 6" 8" x 8"
Lamp Type Medium Pressure Metal HalideMercury Arc
Output High MediumIntensity
Maximum 9" x 103⁄4" x 103⁄4" 4" x 10" x 18"Part Size
Lamp 1,800 W 400 WPower
Optimized Spectral UVA, B, C UVAOutput Range
Optional – Visible Light EnhancedBulb Types Metal Halide
Timer Controlled Yes –Shutter
Replacement Bulbs 983091 - 6" UV Bulb 987246 - UV Lamp, 400 W(Item # - Type) 983050* - Visible Lamp, 400 W
*Optional
Light CureCure ChambersLoctite® brand Cure Chambers are used for the batch processing ofparts that require light curing adhesives and coatings. These unitsare designed to meet a variety of process requirements. Selectionof a Loctite® brand Cure Chamber is based on the part size,required lamp for optimum cure, and whether the need foradditional bulb types exist.
For proper eye protection,
use Loctite® brand ultraviolet
safety glasses,
Item No. 97210
EQ
UIP
ME
NT
129
LIGH
T C
UR
E • LIG
HT
ME
TE
RS
Loctite® ZETA® 7011-A Loctite® ZETA® 7011-V Loctite® ZETA® 7021Dosimeter-Radiometer Dosimeter-Radiometer Spot Radiometer
Item # 98086 98089 98048
Measured 320-400 nm 350-500 nm 280-400 nmSpectral Range
Used to Measure Chambers, Conveyors, Chambers, Conveyors, 3 mm & 5 mm diameterOutput of Flood Systems Flood Systems Wands
UV VisibleLight
UV VisibleLight
VUV UVC UVB UVA Blue Green Yellow Red
100 200 300 400 500 600 700nm
Gamma Rays
10-2 10-1 101 103 104 105 nm
Wavelength
104 100 1 1/100 10-5 eVRadiationEnergy
Infra-Red Microwaves Radiowaves
The Electromagnetic Spectrum
For additional equipment information, reference the Loctite® Equipment Sourcebook or visit www.equipment.loctite.com.
Light Cure Light MetersDecreased radiant power related to the degradation of UV lamps,light guides, and reflectors, results in declines in process efficiencyor incomplete curing of UV light curing products. Loctite® brandZETA® Light Meters are used to check the intensity of ultravioletlight emitted from a light source. These units are useful for qualitymeasures, maintenance, and troubleshooting of ultraviolet emittinglight sources. Selection of a Loctite® brand ZETA® Light Meter isbased on the type of light source that is required to be measured.
CU
ST
OM
•
CU
ST
OM
EQ
UIP
ME
NT
SY
ST
EM
SE
QU
IPM
EN
T
130
CustomCustom Equipment SystemsThe Henkel Equipment Engineering Group can modify any of ourstandard dispensing or curing systems, or custom develop asystem which combines our technology with your currentmanufacturing process. To access these services or obtain moreinformation, call your Henkel Adhesives and Sealants Specialistat 1-800-LOCTITE (562-8483).
One of the most significant factors inmaking a process work is getting theadhesive to the part efficiently andeffectively.
Since 1971, our EquipmentEngineering Group has specialized inthe design, fabrication, and testing ofcustom equipment systems andprocesses for applying and curingLoctite® brand adhesives. Henkelequipment engineers partner withcustomers early on in the developmentof an application. They provide processinput to Henkel application engineersand customers to ensure a seamlesstransition, from selecting an adhesivethat will perform in the application,to its implementation on a production line.
The following are just some of the custom systems the HenkelEquipment Engineering Group can provide.
• Dispense Workstations
• Silicone Pumping Systems
• UV Curing Systems
• Turnkey Bonding, Curing, MaterialHandling
• Porosity Sealing Systems
• Robotic X-Y-Z Gasketing Systems
• Silkscreen and Stencil Systems
• Pre-Applied Sealant Dispense Systems
Loctite® brand custom equipmentsystems provide optimal compatibilitywith Loctite® brand products. TheHenkel total systems approach, ofoffering customers one-stop shopping,ensures that the system will meet orexceed expectations. No one is morecapable of designing a system to applyand cure adhesives than themanufacturer of the adhesives. Ourexperience and unique partnershipbetween customer, applicationengineering, and equipmentengineering guarantees the highestlevel of expertise in the field ofadhesive applications.
On-Site Technical SupportAn experienced Henkel technical representative will work with you toassure optimal product and process performance. We will work toprovide the most effective solution to your sealing problems.Continuous follow-up insures long-term success.
On-Site ServiceThe Henkel Service Department assures that your sealing operation will be kept up to proper standards at all times. Service is available 24 hours a day.
CU
ST
OM
• IMP
RE
GN
AT
ION
SY
ST
EM
S &
RE
NTA
L PR
OG
RA
ME
QU
IPM
EN
T
131
Loctite® Brand Impregnation SystemsHenkel designs, manufactures, and services a complete line ofimpregnation equipment to meet any customer requirement for porosity sealing.
Available configurations include wet vacuum, wet vacuum pressure, anddry vacuum pressure equipment, designed and manufactured to meet themost demanding industrial standards. Whether you need a stand-aloneprocess line, or a custom engineered system, integrated into yourmanufacturing environment, Henkel is the choice for all your impregnation equipment needs.
For help in specifying the ideal process for your needs, contact your local Henkel porosity sealing specialist at 1-800-LOCTITE, ext. 4338.
Impregnation System Profiles
Other sizes readily available upon request.
MODEL 2218 3618 3624 3630 5524
Basket Diameter 22" 36" 36" 36" 55"
Working Depth 18" 18" 24" 30" 24"
Baskets Per Hour 3-5 3-5 3-5 3-5 3-5(anaerobic cure)
Baskets per Hour 2-3 2-3 2-3 2-3 2-3(elevated temperature cure)
The Henkel rental program allows our customers theflexibility to confirm the performance of our adhesive andequipment essentially risk-free before making a capitalinvestment. If you decide to purchase the equipment in thefirst 30 days, the entire rental charge is credited. The benefitsof this program include:
• No initial capital outlay is required. • Trained Henkel personnel will validate that equipment is
in good working order. • Your manufacturing and maintenance staff gets
“hands-on” training with the equipment prior to purchase. • The performance of a new manufacturing
process can be confirmed in production representative conditions prior to purchase.
• Short-term production runs forrework or seasonal production can be performed without capital outlay.
Loctite® Brand Equipment Rental ProgramParticipation in the Program• The Henkel Equipment Services department must be
contacted for quotations, pricing, and availability of rental equipment at 1-800-LOCTITE‚ extension 5174 or 5452.
• To rent equipment from Henkel, one of the following must apply:
• You are an established Henkel customer and will use a purchase order.
• You have a major credit card (Visa or MasterCard). • You will have an authorized Loctite® brand
distributor send Henkel a purchase order. • The purchase order or credit card number must be
received prior to shipping rental equipment. • The customer must agree to the full terms and
conditions as stated in our quotation.
??
??D
ID Y
OU
KN
OW
?
132
DID YOU KNOW?DUROMETER HARDNESSDurometer hardness is a property presented on technicaldata sheets that shows how hard the resin is in the curedstate. A durometer gauge is the actual measuring deviceconsisting of a small drill or blunt indentor point underpressure. Different measurement scales are used fordifferent materials depending on how soft or hard thematerial. The following chart compares three (3) differentgraduated measurement scales and relates hardness values to some common objects as well as Loctite®
brand products.
The higher the number within each scale, the harder thematerial. Shore readings are typically used for plastics.Shore A is for softer materials; Shore D is for hardermaterials. Rockwell readings are typically used for metals.
MATHEMATICAL CONVERSIONSThe following are some common conversions that might behelpful when utilizing Loctite® brand products:
• 1 milliliter (ml) = 1 cubic centimeter (cc)
• 1,000 ml = 1 liter
• 29.5 ml = 1 fl. oz.
• 3.78 liters = 1 gallon
• 473 ml = 1 pint
• 454 grams = 1 lb.
• 947 ml = 1 quart
• 1 kilogram = 2.2 lbs.
• Weight to Volume: grams ÷ specific gravity = cc (ml)
• Volume to Weight: cc (ml) x specific gravity = grams
• Density = specific gravity x 0.99823
• Centipoises = centistokes x density (at a given temp.)
• Temperature: degrees F - 32 x 0.556 = degrees Cdegrees C x 1.8 + 32 = degrees F
• Square Inches to Square Feet: ÷ by 144
• Square Feet to Square Inches: x by 144
• In./lbs. ÷ 12 = ft./lbs.
• Ft./lbs. x 12 = in./lbs.
• 16 in. oz. = 1 in. lb.
• 192 in. oz. = 1 ft. lb.
AREA COVERAGEFlat Parts:
Length x Width x Bondline Thickness x 16.4 = cc/ml requirement per part
Non-threaded Cylindrical Parts:Diameter x Engagement Length x Bondline Thickness (on radius/per side) x 3.14 x 16.4 = cc/ml requirement per part
Potting/Encapsulating Applications:Area (3.14 x R2 ) x Potting Depth x 16.4 = cc/mlrequirement per part
For no induced gap, make the bondline thickness figure 0.001".16.4 is a constant for converting cubic inches to cubic centimeters.
Shore A Shore D Rockwell M Reference Object Loctite® Product
30 Art Gum Eraser 5140™
40 Pink Pearl Eraser 5900®
50 15 Rubber Stamp –
60 Pencil Eraser 5699™
70 30 Rubber Heel –
80 Rubber Sole –
90 45 Typewriter Roller 366™
100 55 Pipe Stem 3106™
74 0 Textbook Cover 334™
78 32 Douglas Fir Plywood –
82 63 E-60HP™
86 95 Hardwood Desktop –
90 125 Glass or Formica –
DID
YO
U K
NO
W?
133
SHELF LIFEWhat is the Henkel shelf life policy for Loctite® brandproducts?
Most Loctite® brand products have a one year shelf life fromdate of shipment from Henkel facilities, unless otherwisespecified by product label. One year holds true for unopenedcontainers only. Once opened, Henkel does not put a timeframe on shelf life due to lack of control over how theproduct is handled once sold. Cyanoacrylates are theprimary line of products that should be refrigerated (40° ±5°F) prior to opening. Once opened, store these products atroom temperature (below 80°F) in a cool, dry location. Donot rerefrigerate cyanoacrylates after opening. Most otherLoctite® brand products should be stored at roomtemperature (below 80°F) in a cool, dry location before andafter opening.
Do the 6 or 7 character batch codes on containers signifythe date of shipment?
No... This code signifies date of manufacture. Certified shelf life is based on this code only if date of shipment cannot be determined. This is generally 2 years from date of manufacturing for most products.
How do you read this 6 or 7 character batch code?
Once a product reaches its “1 year from date of shipment”date, does this mean it can no longer be used?
No... Henkel offers a policy for extension of shelf life.Contact Customer Service (800-243-4874) for details.
EXAMPLE
4 H P 3 0 3 A 2
Last digit in year of manufacture. 4=2004
Location ofPackagerP=Puerto Rico
Month within year of manufacture.H=8th letter of alphabet. Thus, H=August,8th month of year (A=Jan., B=Feb., etc.)
Henkel is in the process of implementing a new “Use By Date” label onall product packages to make the shelf life policy easier to understand.
Last 3-5 characters signify batch number of that particular batch of product. (Henkel’s internal code)
VISCOSITYViscosity is a product property associated with all Loctite®
brand adhesive/sealants. Viscosity is defined as a measureof the resistance of a fluid to flow (usually through a specificorifice). A measure of this fluid “thickness” is expressed incentipoise values. The higher the number, the thicker theproduct. Thicker products are less flowable, and in mostcases, will fill a larger gap if necessary. The following chartrelates viscosity to some products we are all familiar with:
Some products are considered thixotropic. This describes materials that aregel-like at rest but fluid when agitated. Heinz® Ketchup is a good examplethat exhibits this property. Loctite® brand products include Loctite® 262™Threadlocker and Loctite® 509™ Flange Sealant.
Approximate Viscosity in
Product Centipoise (cP) Cyanoacrylates AnaerobicsWater @ 70° 1-5 420™ –Blood or Kerosene 10 – 290™Anti-Freeze or 15 406™ Letter Ethylene Glycol Grade AMotor Oil SAE 10 or 50- 414™, 609™Mazola Corn Oil 100 496™Motor Oil SAE 30 or 150- – 675™Maple Syrup (Log Cabin) 200Motor Oil SAE 40 or 250- 4203™, 640™Castor Oil 500 4471™Motor Oil SAE 60 or 1,000- 403™, 222MS™, Glycerin 2,000 422™ 242® 262™Karo® Corn Syrup or 2,000- 410™, 635™Honey 3,000 4211™Uncle Tom’s® Blackstrap 5,000- 411™, 277™, Molasses 10,000 382™ 620™Hershey® Chocolate 10,000- – 324™, Syrup 25,000 326™Heinz® Ketchup or 50,000- 409™ 330™French’s Mustard 70,000Tomato Paste or 150,000-Peanut Butter 250,000 – 592™Crisco® 1,000,000-Shortening – Lard 2,000,000 – 660™Caulking 5,000,000-Compound 10,000,000 – 593™Window Putty 100,000,000 – –
LOCTITE® BRAND PRODUCT EXAMPLES
BY
PR
OD
UC
T &
IT
EM
NU
MB
ER
IND
EX
134 NOTE: Can’t find a Loctite® product/item number? Contact Customer Service for assistance at: 1-800-243-4874.
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
ANZ023N01 Loctite® Standard Adapter/Check Valve/Jam Nut for Nozzles . . . . . . . . . . . . . . . . . . . 109D609 Loctite® D609™ Hysol® Epoxy Adhesive, Ultra Clear . . . . . . . . . . . . . . . . . . . . 17, 18, 21E-00CL Loctite® E-00CL™ Hysol® Epoxy Adhesive, Low Odor . . . . . . . . . . . . . . . . . . . 16, 18, 21E-00NS Loctite® E-00NS™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . 16, 18, 21E-05CL Loctite® E-05CL™ Hysol® Epoxy Adhesive, Toughened. . . . . . . . . . . . . . . . . . . 16, 18, 21E-20HP Loctite® E-20HP™ Hysol® Epoxy Adhesive, Fast Setting. . . . . . . . . . . . . . . . . . 16, 18, 21E-20NS Loctite® E-20NS™ Hysol® Epoxy Adhesive, Metal Bonder . . . . . . . . . . . . . . . . 16, 19, 21E-30CL Loctite® E-30CL™ Hysol® Epoxy Adhesive, Glass Bonder . . . . . . . . . . . . . . . . . 16, 19, 21E-40FL Loctite® E-40FL™ Hysol® Epoxy Adhesive, Flexible. . . . . . . . . . . . . . . . . . . . . . 16, 19, 21E-60HP Loctite® E-60HP™ Hysol® Epoxy Adhesive, Toughened . . . . . . . . . . . . . . . . . . 16, 19, 21E-60NC Loctite® E-60NC™ Hysol® Epoxy Adhesive, Electrically Non-Corrosive. . . . . . . . . . 17, 19E-90FL Loctite® E-90FL™ Hysol® Epoxy Adhesive, Flexible. . . . . . . . . . . . . . . . . . . . . . 17, 19, 21E-120HP Loctite® E-120HP™ Hysol® Epoxy Adhesive, Ultra Strength . . . . . . . . . . . . . . . 17, 19, 21E-214HP Loctite® E-214HP™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . 17, 19, 21H3000 Loctite® H3000™ Speedbonder™ Structural Adhesive, General Purpose. . . . . . . . . 9, 11H3101 Loctite® H3101™ Speedbonder™ Structural Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . 11H3151 Loctite® H3151™ Speedbonder™ Structural Adhesive, Metal Bonder . . . . . . . . . . . 9, 11H3300 Loctite® H3300™ Speedbonder™ Structural Adh., General Purpose/Fast Fixture . . . 9, 11H4000 Loctite® H4000™ Speedbonder™ Structural Adhesive, Non-Sag . . . . . . . . . . . . . . . 9, 11H4100 Loctite® H4100™ Speedbonder™ Structural Adhesive, Ultra Fast. . . . . . . . . . . . . . . 9, 11H4200 Loctite® H4200™ Speedbonder™ Structural Adhesive, Toughened. . . . . . . . . . . . . . 9, 11H4500 Loctite® H4500™ Speedbonder™ Structural Adhesive, Metal Bonder. . . . . . . . . . . . 9, 11H4800 Loctite® H4800™ Speedbonder™ Structural Adhesive, Toughened. . . . . . . . . . . . . . 9, 11H8000 Loctite® H8000™ Speedbonder™ Structural Adhesive, Fast Fixture . . . . . . . . . . . . . 9, 11M-11FL Loctite® M-11FL™ Hysol® Medical Device Urethane Adhesive . . . . . . . . . . . . . . . . 59, 61M-21HP Loctite® M-21HP™ Hysol® Medical Device Epoxy Adhesive . . . . . . . . . . . . . . . . . . 59, 61M-31CL Loctite® M-31CL™ Hysol® Medical Device Epoxy Adhesive . . . . . . . . . . . . . . . . . . 59, 61M-121HP Loctite® M-121HP™ Hysol® Medical Device Epoxy Adhesive . . . . . . . . . . . . . . . . . 59, 61U-05FL Loctite® U-05FL™ Hysol® Urethane Adhesive, High Strength . . . . . . . . . . . . . . 17, 20, 21U-09FL Loctite® U-09FL™ Hysol® Urethane Adhesive, Highly Flexible . . . . . . . . . . . . . 17, 20, 21U-09LV Loctite® U-09LV™ Hysol® Urethane Adhesive, Low Viscosity . . . . . . . . . . . . . . 17, 20, 211C Loctite® 1C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181C-LV Loctite® 1C-LV™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181X Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . 25, 263X Loctite® 3X™ Hysol® Polyshot™ Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . 25, 266C Loctite® 6C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1811C Loctite® 11C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 2155 Loctite® 55™ Pipe Sealing Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99220 Loctite® 220™ Threadlocker, Wicking Grade/Low Strength . . . . . . . . . . . . . . . 52, 96, 97222 Loctite® 222™ Threadlocker, Low Strength/Small Screw . . . . . . . . . . . . . . . . . . . . . . . 52232 Loctite® 232™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . 25, 27236 Loctite® 236™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . 25, 27242 Loctite® 242® Threadlocker, Medium Strength . . . . . . . . . . . . . . . . . . . . . . 50, 52, 96, 97243 Loctite® 243™ Threadlocker, Medium Strength/Oil Resistant . . . . . . . . . . . . . . . . . 50, 52246 Loctite® 246™ Threadlocker, Medium Strength/High Temperature . . . . . . . . . . . . . 50, 52248 Loctite® QuickStix™ 248™ Threadlocker, Medium Strength/Removable . . . . . . . . 96, 97262 Loctite® 262™ Threadlocker, Medium to High Strength . . . . . . . . . . . . . . . 50, 52, 96, 97266 Loctite® 266™ Threadlocker, High Strength/High Temperature. . . . . . . . . . . . . . . . 50, 52268 Loctite® QuickStix™ 268™ Threadlocker, High Strength . . . . . . . . . . . . . . . . . . . . 96, 97271 Loctite® 271™ Threadlocker, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52272 Loctite® 272™ Threadlocker, High Strength/High Temperature. . . . . . . . . . . . . . . . 51, 52277 Loctite® 277™ Threadlocker, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52290 Loctite® 290™ Threadlocker, Wicking Grade. . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 96, 97294 Loctite® 294™ Threadlocker, Wicking Grade/High Temperature . . . . . . . . . . . . . . . 51, 52312 Loctite® 312™ Speedbonder™ Structural Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . 10324 Loctite® 324™ Speedbonder™ Structural Adhesive, High Impact . . . . . . . . . . . . . . . 8, 10325 Loctite® 325™ Speedbonder™ Structural Adhesive, High Temperature . . . . . . . . . . 8, 10326 Loctite® 326™ Speedbonder™ Structural Adhesive, Fast Fixture . . . . . . . . . . . . . . . 8, 10330 Loctite® 330™ Depend® Adhesive, No-Mix . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 10, 62, 63332 Loctite® 332™ Structural Adhesive, Severe Environment . . . . . . . . . . . . . . . . . . . . . 8, 10334 Loctite® 334™ Structural Adhesive, High Performance. . . . . . . . . . . . . . . . . . . . . . . . . 10342 Loctite® 342™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . . . . 26349 Loctite® 349™ Impruv® Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30352 Loctite® 352™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 30363 Loctite® 363™ Impruv® Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30366 Loctite® 366™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30380 Loctite® 380™ Black Max® Instant Adhesive, Toughened . . . . . . . . . . . . . . 12, 14, 62, 63382 Loctite® 382™ Tak Pak® Instant Adhesive, Ultra Performance . . . . . . . . . . . . . . . . . . . 14
392 Loctite® 392™ Structural Adhesive, Fast Fixture/Magnet Bonder . . . . . . . . . . . . . . . 8, 10401 Loctite® 401™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . . . . 14403 Loctite® 403™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . 12, 14404 Loctite® 404™ Quick Set™ Instant Adhesive, General Purpose . . . . . . . . . 12, 14, 62, 63406 Loctite® 406™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . . . . 14408 Loctite® 408™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . 14409 Loctite® 409™ Super Bonder® Instant Adhesive, Industrial Grade Gel . . . . . . . . . . . . . 14410 Loctite® 410™ Prism® Instant Adhesive, Black/Toughened . . . . . . . . . . . . . . . . . . . . . 14411 Loctite® 411™ Prism® Instant Adhesive, Clear/Toughened . . . . . . . . . . . . . . . . . . 12, 14414 Loctite® 414™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14415 Loctite® 415™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14416 Loctite® 416™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14420 Loctite® 420™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14422 Loctite® 422™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14425 Loctite® 425™ Assure™ Instant Adhesive, Surface Curing Threadlocker . . . . . . . . 51, 52426 Loctite® 426™ Prism® Instant Adhesive, Black/Toughened Gel . . . . . . . . . . . . . . . . . . 14430 Loctite® 430™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 14444 Loctite® 444™ Tak Pak® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 14454 Loctite® 454™ Prism® Instant Adhesive, Surface Insensitive Gel . . . . . . . . . . . 14, 62, 63455 Loctite® 455™ Prism® Instant Adhesive Gel, Low Odor/Low Bloom . . . . . . . . . . . . . . 15460 Loctite® 460™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . 15480 Loctite® 480™ Prism® Instant Adhesive, Black/Toughened . . . . . . . . . . . . . . . . . . . . . . 15493 Loctite® 493™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15495 Loctite® 495™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 15496 Loctite® 496™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15498 Loctite® 498™ Super Bonder® Instant Adhesive, Thermal Cycling Resistant . . . . . 13, 15499 Loctite® 499™ Super Bonder® Instant Adhesive, Thermal Cycling Resistant Gel . . . . . 15504 Loctite® 504™ Gasket Eliminator® Flange Sealant, Gap Filling . . . . . . . . . . . . . . . . 34, 35509 Loctite® 509™ Gasket Eliminator® Flange Sealant, Flexible . . . . . . . . . . . . . . . . . . . 34, 35510 Loctite® 510™ Gasket Eliminator® Flange Sealant, High Temperature . . . . 34, 35, 84, 86515 Loctite® 515™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35518 Loctite® 518™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . 34, 35, 84, 86534 Loctite® QuickStix™ 534™ Hi-Tack Gasket Dressing. . . . . . . . . . . . . . . . . . . . . . . . 86, 87542 Loctite® 542™ Thread Sealant, Fine Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54, 56545 Loctite® 545™ Thread Sealant, Hydraulic/Pneumatic Fittings . . . . . . . . . . . 54, 56, 98, 99548 Loctite® QuickStix™ 548™ Gasket Eliminator® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86549 Loctite® 549™ Instant Seal Plastic Gasket Thread Sealant . . . . . . . . . . . . . . . . . . . . . . 35554 Loctite® 554™ Thread Sealant, Refrigerant Sealant . . . . . . . . . . . . . . . . . . . . . . . . 54, 56561 Loctite® QuickStix™ 561™ PST® Pipe Sealant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99564 Loctite® 564™ Thread Sealant, General Purpose . . . . . . . . . . . . . . . . . . . . 54, 56, 98, 99565 Loctite® 565™ PST® Thread Sealant, Controlled Strength . . . . . . . . . . . . . 54, 56, 98, 99567 Loctite® 567™ PST® Thread Sealant, High Temperature . . . . . . . . . . . . . . . 55, 56, 98, 99568 Loctite® 568™ Flange Sealant, Plastic Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35569 Loctite® 569™ Thread Sealant, Hydraulic Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56571 Loctite® 571™ Thread Sealant, Pipe Sealant HVV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56572 Loctite® 572™ Thread Sealant, Low Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 56573 Loctite® 573™ Flange Sealant, Medium Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35574 Loctite® 574™ Flange Sealant, Fast Curing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35577 Loctite® 577™ Thread Sealant, Coarse Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 56579 Loctite® 579™ Thread Sealant, Instant Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 56580 Loctite® 580™ PST® Thread Sealant, Low Halogen/Low Sulfur . . . . . . . . . . . . . . . 55, 56587 Loctite® 587™ Blue, High Performance RTV Silicone Gasket Maker. . . . . . . . . . . . 85, 87592 Loctite® 592™ PST® Thread Sealant, Slow Cure . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 56598 Loctite® 598™ Black, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . 85, 87608 Loctite® 608™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . 17, 18, 21609 Loctite® 609™ Retaining Compound, Press Fit/General Purpose . . . . . . . . 46, 47, 94, 95615 Loctite® 615™ Hysol® Epoxy Adhesive, Sandable . . . . . . . . . . . . . . . . . . . . . . . 17, 18, 21620 Loctite® 620™ Retaining Compound, Slip Fit/High Temperature . . . . . . . . 46, 47, 94, 95635 Loctite® 635™ Retaining Compound, Slip Fit/High Strength/Slow Cure . . . . . . . . . 46, 47638 Loctite® 638™ Retaining Compound, Slip Fit/Maximum Strength . . . . . . . . . . . . . 46, 47640 Loctite® 640™ Retaining Compound, Press Fit/Med. Strength/High Temperature . 46, 47641 Loctite® 641™ Retaining Compound, Press & Slip Fit/Controlled Strength . . . . . . 46, 47648 Loctite® 648™ Retaining Compound, Press Fit/High Strength/Rapid Cure . . . . . . . . . . 47660 Loctite® 660™ Quick Metal® Retaining Compound, Press Fit Repair . . . . . . . . 47, 94, 95661 Loctite® 661™ Retaining Compound, Slip Fit/UV Cure . . . . . . . . . . . . . . . . . . . 22, 23, 47668 Loctite® QuickStix™ 668™ Retaining Compound, High Temperature . . . . . . . . . . . 94, 95675 Loctite® 675™ Retaining Compound, Press Fit/Medium Strength . . . . . . . . . . . . . . . . 47680 Loctite® 680™ Retaining Compound, Slip Fit/High Strength/High Viscosity . . . . . . 47, 95
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
BY
PR
OD
UC
T &
ITE
M N
UM
BE
RIN
DE
X
135NOTE: Can’t find a Loctite® product/item number? Contact Customer Service for assistance at: 1-800-243-4874.
712 Loctite® 712™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49713 Loctite® 713™ Prism® Medical Device Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61740 Loctite® 740™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . . . . 26770 Loctite® 770™ Prism® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 49793 Loctite® 793™ Prism® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49222MS Loctite® 222MS™ Threadlocker, Low Strength/Small Screw . . . . . . . . . . . 50, 52, 96, 97603 Loctite® 603™ Retaining Compound, Press Fit/Oil Tolerant . . . . . . . . . . . . 46, 47, 94, 95740LV Loctite® 0740LV™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . 27907 Loctite® 907™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180151 Loctite® 0151™ Hysol® Epoxy Adhesive, Ultra Clear . . . . . . . . . . . . . . . . . 17, 18, 21, 230420 Loctite® 0420™ Hysol® SprayPac® Polyshot™ Hot Melt Adhesive, EVA Based . . . 25, 260430 Loctite® 0430™ Hysol® SprayPac® Polyshot™ Hot Melt Adhesive, EVA Based . . . 25, 260437 Loctite® 0437™ Hysol® SprayPac® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . 25, 260450 Loctite® 0450™ Hysol® SprayPac® Polyshot™ Hot Melt Adhesive, EVA Based . . . 25, 260452 Loctite® 0452™ Hysol® SprayPac® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . 25, 261942 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . 25, 26, 442432 Loctite® 2432™ Threadlocker, Low Halogen/Low Sulfur. . . . . . . . . . . . . . . . . . . . . 51, 522440 Loctite® 2440™ Threadlocker, Primerless/Medium Strength . . . . . . . . . . . . . . . . . 51, 522760 Loctite® 2760™ Threadlocker, Primerless/High Strength . . . . . . . . . . . . . . . . . . . . 51, 523030 Loctite® 3030™ Adhesive, Polyolefin Bonder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 113100 Loctite® 3100™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303101 Loctite® 3101™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303102 Loctite® 3102™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303103 Loctite® 3103™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 303104 Loctite® 3104™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303105 Loctite® 3105™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 303106 Loctite® 3106™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 303107 Loctite® 3107™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 303108 Loctite® 3108™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 303140 Loctite® 3140™ Hysol® Epoxy Resin, General Purpose. . . . . . . . . . . . . . . . . . . 40, 42, 443141 Loctite® 3141™ Hysol® Epoxy Resin, High Temperature. . . . . . . . . . . . . . . . . . 40, 42, 443142 Loctite® 3142™ Hysol® Epoxy Resin, Thermally Conductive. . . . . . . . . . . . . . . 40, 43, 443144 Loctite® 3144™ Hysol® Epoxy Resin, Flame Retardant . . . . . . . . . . . . . . . . . . . 40, 43, 443162 Loctite® 3162™ Hysol® Epoxy Hardener, Fast Cure. . . . . . . . . . . . . . . . . . . 40, 42, 43, 443163 Loctite® 3163™ Hysol® Epoxy Hardener, Excellent Adhesion . . . . . . . . . . . 40, 42, 43, 443164 Loctite® 3164™ Hysol® Epoxy Hardener, General Purpose . . . . . . . . . . . . . 40, 42, 43, 443165 Loctite® 3165™ Hysol® Epoxy Hardener, Low Shrinkage . . . . . . . . . . . . . . 40, 42, 43, 443173 Loctite® 3173™ Hysol® Polyurethane Resin, General Purpose . . . . . . . . . . . . . 40, 41, 443175 Loctite® 3175™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 303182 Loctite® 3182™ Hysol® Polyurethane Hardener, Fast Cure . . . . . . . . . . . . . . . . 40, 41, 443183 Loctite® 3183™ Hysol® Polyurethane Hardener, General Purpose . . . . . . . . . . 40, 41, 443184 Loctite® 3184™ Hysol® Polyurethane Hardener, Flame Retardant. . . . . . . . . . . 40, 41, 443201 Loctite® 3201™ Light Cure Adhesive, Polycarbonate/Thermoplastics. . . . . . . . . . . 58, 603211 Loctite® 3211™ Light Cure Adhesive, Polycarbonate/Thermoplastics. . . . . . . . . . . 58, 603301 Loctite® 3301™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 603311 Loctite® 3311™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 603321 Loctite® 3321™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 603335 Loctite® 3335™ Light Cure Adhesive, UV Cationic Epoxy . . . . . . . . . . . . . . . . . . . . 29, 313336 Loctite® 3336™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 313337 Loctite® 3337™ Light Cure Adhesive, UV Cationic Epoxy . . . . . . . . . . . . . . . . . 23, 29, 313340 Loctite® 3340™ Light Cure Adhesive, UV Cationic Epoxy . . . . . . . . . . . . . . . . . 23, 29, 313341 Loctite® 3341™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . 58, 603345 Loctite® 3345™ Light Cure Adhesive, Glass/Metal . . . . . . . . . . . . . . . . . . . . . . 23, 58, 603381 Loctite® 3381™ Light Cure Adhesive, Flexible/Plastics . . . . . . . . . . . . . . . . . . . . . . 58, 603400 Loctite® 3400™ OptiLOC® Fiber Optic Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . 22, 233401 Loctite® 3401™ OptiLOC® Fiber Optic Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . 22, 233402 Loctite® 3402™ OptiLOC® Fiber Optic Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . 22, 233403 Loctite® 3403™ OptiLOC® Fiber Optic Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . 22, 233407 Loctite®3407™ OptiLOC® Fiber Optic Adhesive, Silicone/Heat Cure . . . . . . . . . . . . . . . 233491 Loctite® 3491™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 29, 303492 Loctite® 3492™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 29, 303493 Loctite® 3493™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303494 Loctite® 3494™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 303525 Loctite® 3525™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 303526 Loctite® 3526™ Light Cure Acrylic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 29, 303631 Loctite® 3631™ Hysol® Hot Melt Adhesive, Urethane . . . . . . . . . . . . . . . . . . . . . . . 24, 273650 Loctite® 3650™ Hysol® Hot Melt Adhesive, Polyolefin . . . . . . . . . . . . . . . . . . . . . . . . . 443651 Loctite® 3651™ Hysol® Hot Melt Adhesive, Polyolefin . . . . . . . . . . . . . . . . . . . 24, 27, 44
3751 Loctite® 3751™ LiteTak® Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303761 Loctite® 3761™ LiteTak® Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303911 Loctite® 3911™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 603912 Loctite® 3912™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 603913 Loctite® 3913™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 603921 Loctite® 3921™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 603922 Loctite® 3922™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 603924 Loctite® 3924™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 603926 Loctite® 3926™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 603933 Loctite® 3933™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 603936 Loctite® 3936™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 603941 Loctite® 3941™ Light Cure Adhesive, High Performance/Various Substrates. . . . . 58, 603942 Loctite® 3942™ Light Cure Adhesive, High Performance/Various Substrates. . . . . 58, 603943 Loctite® 3943™ Light Cure Adhesive, High Performance/Various Substrates. . . . . 58, 603944 Loctite® 3944™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 603971 Loctite® 3971™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . 58, 603972 Loctite® 3972™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . 58, 603981 Loctite® 3981™ Hysol® Epoxy Adhesive, High Performance/Various Substrates . . 59, 613982 Loctite® 3982™ Hysol® Epoxy Adhesive, High Performance/Various Substrates . . 59, 613984 Loctite® 3984™ Hysol® Epoxy Adhesive, High Performance/Various Substrates . . 59, 614011 Loctite® 4011™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . 59, 614013 Loctite® 4013™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614014 Loctite® 4014™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614031 Loctite® 4031™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614046 Loctite® 4046™ Hysol® Polyshot™ Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . 274061 Loctite® 4061™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614081 Loctite® 4081™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614161 Loctite® 4161™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614203 Loctite® 4203™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . 154204 Loctite® 4204™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . 13, 154205 Loctite® 4205™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . . 154206 Loctite® 4206™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614210 Loctite® 4210™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . 13, 154211 Loctite® 4211™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . . 154212 Loctite® 4212™ Prism® Instant Adhesive, Thermal Resistant Gel . . . . . . . . . . . . . . 13, 154304 Loctite® 4304™ Flashcure® Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . 29, 31, 604305 Loctite® 4305™ Flashcure® Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . 29, 31, 604306 Loctite® 4306™ Flashcure® Light Cure Adhesive, Instant . . . . . . . . . . . . . . 29, 31, 59, 604307 Loctite® 4307™ Flashcure® Light Cure Adhesive, Instant . . . . . . . . . . . . . . 29, 31, 59, 604471 Loctite® 4471™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . . . 154500 Loctite® 4500™ Prism® Inst Adhesive, Fast Curing/Surface Insensitive Gel . . . . . 13, 154501 Loctite® 4501™ Prism® Instant Adhesive, Wicking Viscosity . . . . . . . . . . . . . . . . 13, 154502 Loctite® 4502™ Prism® Instant Adhesive, Fast Curing/Surface Insensitive . . . . . 13, 154503 Loctite® 4503™ Prism® Instant Adhesive, Fast Curing/Surface Insensitive . . . . . 13, 154541 Loctite® 4541™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614601 Loctite® 4601™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614851 Loctite® 4851™ Prism® Instant Adhesive, Flexible . . . . . . . . . . . . . . . . . . . 13, 15, 59, 614861 Loctite® 4861™ Prism® Instant Adhesive, Flexible . . . . . . . . . . . . . . . . . . . 13, 15, 59, 614981 Loctite® 4981™ Super Bonder® Medical Device Adhesive. . . . . . . . . . . . . . . . . . . . . . . 615031 Loctite® 5031™ Nuva-Sil® Silicone Potting Compound. . . . . . . . . . . . . . . . . . . 29, 31, 455033 Loctite® 5033™ Nuva-Sil® Silicone Potting Compound. . . . . . . . . . . . . . . . . . . . . . . . . 315083 Loctite® 5083™ Nuva-Sil® Silicone Potting Compound. . . . . . . . . . . . . . . . . . . . . . . . . 315091 Loctite® 5091™ Nuva-Sil® Silicone Potting Compound, High Adhesion . . . . . . . . . 31, 455127 Loctite® 5127™ Flexible Anaerobic Gasket Flange Sealant . . . . . . . . . . . . . . . . . . . . . . 355182 Loctite® 5182™ Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 355248 Loctite® 5248™ Nuva-Sil® Medical Device Sealant . . . . . . . . . . . . . . . . . . . . . . . . . 59, 615699 Loctite® 5699™ Grey Flange Sealant, High Perf. RTV Silicone Gasket Maker . . . . . 36, 375772 Loctite® 5772™ Thread Sealant, Low Halogen/Low Sulfur . . . . . . . . . . . . . . . . . . . 55, 565900 Loctite® 5900® Flange Sealant, Heavy Body RTV Silicone. . . . . . . . . . . . . . . . . . . . 36, 375905 Loctite® 5905™ Flange Sealant, RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 375910 Loctite® 5910® Flange Sealant, RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 375920 Loctite® 5920™ Copper Flange Sealant, High Perf. RTV Sil. Gasket Mkr . . 36, 37, 85, 875950 Loctite® 5950™ Fastgasket® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 375951 Loctite® 5951™ Fastgasket® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 375960 Loctite® 5960™ Fastgasket® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 375963 Loctite® 5963™ Procure™ Cure-In-Place Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375964 Loctite® 5964™ Procure™ Cure-In-Place Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375999 Loctite® 5999™ Flange Sealant, Heavy Body/Grey High Perf. RTV Silicone . . . . . . 36, 37
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
BY
PR
OD
UC
T &
IT
EM
NU
MB
ER
IND
EX
136 NOTE: Can’t find a Loctite® product/item number? Contact Customer Service for assistance at: 1-800-243-4874.
6002 Loctite® 6002™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267021 Loctite® Zeta® 7021™ Spot Radiometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1267075 Loctite® 7075™ Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 497090 Loctite® 7090™ Primer , Solventless Activator (Monomer) . . . . . . . . . . . . . . . . . . . . . 497109 Loctite® 7109™ Tak Pak II® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497113 Loctite® 7113™ Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 497380 Loctite® 7380™ Depend® Activator, Solventless . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 497387 Loctite® 7387™ Depend® Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 497452 Loctite® 7452™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 497453 Loctite® 7453™ Accelerator, High Purity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497460 Loctite® 7460™ Hysol® SprayPac® Polyshot™ Hot Melt Adhesive, Polyamide . . . . 24, 277471 Loctite® 7471™ Primer T™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 497500 Loctite® 7500™ Hysol® SprayPac® Polyshot™ Hot Melt Adhesive, Polyamide . . . . 24, 277649 Loctite® 7649™ Primer N™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 49, 96, 977701 Loctite® 7701™ Prism® Medical Device Adhesive Primer . . . . . . . . . . . . . . . . . . . . . . . 617803 Loctite® 7803™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277804 Loctite® 7804™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277804FRM-HVLoctite® 7804FRM-HV™ Hysol® Hot Melt Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . 277809FR Loctite® 7809FR™ Hysol® Hot Melt Adhesive, Polyamide. . . . . . . . . . . . . . . . . 24, 27, 447811 Loctite® 7811™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . . 24, 27, 447901 Loctite® 7901™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . . 24, 27, 449412 Loctite® 9412™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199430 Loctite® 9430™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . 17, 18, 219433 Loctite® 9433™ Hysol® Epoxy Adhesive, Self-Leveling . . . . . . . . . . . . . . . . . . . 17, 18, 219459 Loctite® 9459™ Hysol® Epoxy Adhesive, High Temperature Resistance . . . . . . . . 17, 199460 Loctite® 9460™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . 17, 19, 219462 Loctite® 9462™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199432NA Loctite® 9432NA™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . 17, 19, 219460F Loctite® 9460F™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189460PB Loctite® 9460PB™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199739 Loctite® 9739™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900101 Loctite® Quick Service Tool Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104, 10500112 Loctite® O-Ring Making Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104, 10500144 Loctite® 312™ Speedbonder™ Structural Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . 1003333 Loctite® 312™ Speedbonder™ Structural Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . 1012224 Loctite® 366™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3012292 Loctite® 444™ Tak Pak® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 1412294 Loctite® 444™ Tak Pak® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 1412695 Loctite® 7090™ Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4917412 Loctite® 5091™ Nuva-Sil® Silicone Potting Compound, High Adhesion . . . . . . . . . 31, 4517421 Loctite® 455™ Prism® Instant Adhesive Gel, Low Odor/Low Bloom . . . . . . . . . . . . . . 1517430 Loctite® 5127™ Flexible Anaerobic Gasket Flange Sealant . . . . . . . . . . . . . . . . . . . . . . 3517451 Loctite® 426™ Prism® Instant Adhesive, Black/Toughened Gel . . . . . . . . . . . . . . . . . . 1417528 Loctite® 5083™ Nuva-Sil® Silicone Potting Compound. . . . . . . . . . . . . . . . . . . . . . . . . 3117529 Loctite® 426™ Prism® Instant Adhesive, Black/Toughened Gel . . . . . . . . . . . . . . . . . . 1417635 Loctite® 5083™ Nuva-Sil® Silicone Potting Compound. . . . . . . . . . . . . . . . . . . . . . . . . 3117944 Loctite® 3491™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 3018010 Loctite® 5182™ Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3518013 Loctite® 4013™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6118014 Loctite® 4014™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6118030 Loctite® 409™ Super Bonder® Instant Adhesive Gel, Industrial Grade . . . . . . . . . . . . . 1418074 Loctite® 5091™ Nuva-Sil® Silicone Potting Compound, High Adhesion . . . . . . . . . 31, 4518198 Loctite® 5951™ Fastgasket® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 3718390 Loctite® 712™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4918396 Loctite® 770™ Prism® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4918397 Loctite® 770™ Prism® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4918398 Loctite® 426™ Prism® Instant Adhesive, Black/Toughened Gel . . . . . . . . . . . . . . . . . . 1418490 Loctite® 7452™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4918495 Loctite® 5950™ Fastgasket® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 3718575 Loctite® 7452™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4918576 Loctite® 7452™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4918580 Loctite® 7452™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4918581 Loctite® 5699™ Grey, High Performance RTV Silicone Gasket Maker . . . . 36, 37, 85, 8718582 Loctite® 5699™ Grey, High Performance RTV Silicone Gasket Maker . . . . . . . . . . 36, 3718583 Loctite® 5699™ Grey, High Performance RTV Silicone Gasket Maker . . . . . . . . . . 36, 3718636 Loctite® 712™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4918637 Loctite® 7452™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4918650 Loctite® 793™ Prism® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
18666 Loctite® 3492™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 3018680 Loctite® 4011™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6118681 Loctite® 4011™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6118682 Loctite® 4031™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6118683 Loctite® 4031™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6118686 Loctite® 4061™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6118687 Loctite® 4061™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6118688 Loctite® 4081™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6118689 Loctite® 4081™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6118690 Loctite® 4541™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6118691 Loctite® 4541™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6118692 Loctite® 4601™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6118693 Loctite® 4601™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6118694 Loctite® 4981™ Super Bonder® Medical Device Adhesive. . . . . . . . . . . . . . . . . . . . . . . 6118695 Loctite® 4981™ Super Bonder® Medical Device Adhesive. . . . . . . . . . . . . . . . . . . . . . . 6118718 Loctite® 5699™ Grey, High Perf. RTV Sil. Gasket Mkr. . . . . . . . . . . . . . . . . 36, 37, 85, 8718751 Loctite® 3493™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3018861 Loctite® 7387™ Depend® Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4918862 Loctite® 7387™ Depend® Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4919266 Loctite® 7649™ Primer N™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4919267 Loctite® 7471™ Primer T™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4919268 Loctite® 7471™ Primer T™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4919269 Loctite® 7649™ Primer N™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4919368 Loctite® 7090™ Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4919605 Loctite® 7113™ Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4919606 Loctite® 7113™ Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4919727 Loctite® 3201™ Light Cure Adhesive, Polycarbonate/Thermoplastics. . . . . . . . . . . 58, 6019728 Loctite® 3201™ Light Cure Adhesive, Polycarbonate/Thermoplastics. . . . . . . . . . . 58, 6019730 Loctite® 3211™ Light Cure Adhesive, Polycarbonate/Thermoplastics. . . . . . . . . . . 58, 6019731 Loctite® 3211™ Light Cure Adhesive, Polycarbonate/Thermoplastics. . . . . . . . . . . 58, 6019733 Loctite® 3301™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 6019734 Loctite® 3301™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 6019736 Loctite® 3311™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 6019737 Loctite® 3311™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 6019739 Loctite® 3321™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 6019740 Loctite® 3321™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 6019743 Loctite® 4161™ Super Bonder® Medical Device Adhesive. . . . . . . . . . . . . . . . . . . . . . . 6119744 Loctite® 4161™ Super Bonder® Medical Device Adhesive. . . . . . . . . . . . . . . . . . . . . . . 6119757 Loctite® 4210™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . 13, 1519758 Loctite® 4210™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . 13, 1519759 Loctite® 4210™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . 13, 1519761 Loctite® 4211™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . . 1519762 Loctite® 4211™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . . 1519763 Loctite® 4211™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . . 1519765 Loctite® 4212™ Prism® Instant Adhesive, Thermal Resistant Gel . . . . . . . . . . . . . . 13, 1519766 Loctite® 4212™ Prism® Instant Adhesive, Thermal Resistant Gel . . . . . . . . . . . . . . 13, 1519767 Loctite® 4212™ Prism® Instant Adhesive, Thermal Resistant Gel . . . . . . . . . . . . . . 13, 1519768 Loctite® 4212™ Prism® Instant Adhesive, Thermal Resistant Gel . . . . . . . . . . . . . . 13, 1519822 Loctite® 7380™ Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4919824 Loctite® 7380™ Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4919861 Loctite® 3101™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3019862 Loctite® 3100™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3019886 Loctite® 7701™ Prism® Medical Device Adhesive Primer . . . . . . . . . . . . . . . . . . . . . . . 6119887 Loctite® 7701™ Prism® Medical Device Adhesive Primer . . . . . . . . . . . . . . . . . . . . . . . 6119889 Loctite® 713™ Prism® Medical Device Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6119907 Loctite® 7380™ Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4919987 Loctite® 5248™ Nuva-Sil® Medical Device Sealant . . . . . . . . . . . . . . . . . . . . . . . . . 59, 6120162 Loctite® ODC-Free Cleaner & Degreaser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 74, 7520166 Loctite® 5900® Flange Sealant, Heavy Body RTV Silicone. . . . . . . . . . . . . . . . . . . . 36, 3720167 Loctite® 5900® Flange Sealant, Heavy Body RTV Silicone. . . . . . . . . . . . . . . . . . . . 36, 3720168 Loctite® 5900® Flange Sealant, Heavy Body RTV Silicone. . . . . . . . . . . . . . . . . . . . 36, 3720170 Loctite® 5999™ Flange Sealant, Heavy Body/Grey High Perf. RTV Silicone . . . . . . 36, 3720246 Loctite® 793™ Prism® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4920251 Loctite® 330™ Depend® Adhesive, No Mix . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 10, 62, 6320252 Loctite® 330™ Depend® Adhesive, No Mix . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 10, 62, 6320253 Loctite® 330™ Depend® Adhesive, No Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 1020260 Loctite® ODC-Free Cleaner & Degreaser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 74, 7520268 Loctite® 4013™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
BY
PR
OD
UC
T &
ITE
M N
UM
BE
RIN
DE
X
137NOTE: Can’t find a Loctite® product/item number? Contact Customer Service for assistance at: 1-800-243-4874.
20269 Loctite® 4014™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6120279 Loctite® Natural Blue® Biodegradable Cleaner & Degreaser, Fragrance-Free. . . 72, 74, 7520282 Loctite® 7453™ Accelerator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4920352 Loctite® 712™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4920419 Loctite® 444™ Tak Pak® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 1420420 Loctite® 382™ Tak Pak® Instant Adhesive, Ultra Performance . . . . . . . . . . . . . . . . . . . 1421088 Loctite® 7387™ Depend® Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4921347 Loctite® 7649™ Primer N™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 49, 96, 9721348 Loctite® 7649™ Primer N™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 49, 96, 9721349 Loctite® 7075™ Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4921359 Loctite® 3761™ LiteTak® Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3021360 Loctite® 3761™ LiteTak® Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3021362 Loctite® 3751™ LiteTak® Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3021363 Loctite® 3751™ LiteTak® Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3021425 Loctite® Fixmaster® Fast Cure Epoxy, Mixer Cups. . . . . . . . . . . . . . . . . . . . . . . . . . 78, 8021426 Loctite® Fixmaster® Fast Cure Epoxy, Mixer Cups. . . . . . . . . . . . . . . . . . . . . . . . . . 78, 8021427 Loctite® Fixmaster® General Purpose Epoxy, Mixer Cups . . . . . . . . . . . . . . . . . . . . 78, 8021433 Loctite® 243™ Threadlocker, Medium Strength/Oil Resistant . . . . . . . . . . . . . . . . . 50, 5221434 Loctite® 277™ Threadlocker, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 5221440 Loctite® 603™ Retaining Compound, Press Fit/Oil Tolerant . . . . . . . . . . . . 46, 47, 94, 9521441 Loctite® 603™ Retaining Compound, Press Fit/Oil Tolerant . . . . . . . . . . . . 46, 47, 94, 9521442 Loctite® 603™ Retaining Compound, Press Fit/Oil Tolerant . . . . . . . . . . . . 46, 47, 94, 9521443 Loctite® 648™ Retaining Compound, Press Fit/High Strength/Rapid Cure . . . . . . . . . . 4721444 Loctite® 648™ Retaining Compound, Press Fit/High Strength/Rapid Cure . . . . . . . . . . 4721445 Loctite® 648™ Retaining Compound, Press Fit/High Strength/Rapid Cure . . . . . . . . . . 4721447 Loctite® 638™ Retaining Compound, Slip Fit/Maximum Strength . . . . . . . . . . . . . 46, 4721448 Loctite® 638™ Retaining Compound, Slip Fit/Maximum Strength . . . . . . . . . . . . . 46, 4721449 Loctite® 638™ Retaining Compound, Slip Fit/Maximum Strength . . . . . . . . . . . . . 46, 4721453 Loctite® 542™ Thread Sealant, Fine Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54, 5621454 Loctite® 572™ Thread Sealant, Low Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 5621456 Loctite® 577™ Thread Sealant, Coarse Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 5621457 Loctite® 577™ Thread Sealant, Coarse Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 5621458 Loctite® 641™ Retaining Compound, Press & Slip Fit/Controlled Strength . . . . . . 46, 4721463 Loctite® 222™ Threadlocker, Low Strength/Small Screw . . . . . . . . . . . . . . . . . . . . . . . 5221464 Loctite® 222™ Threadlocker, Low Strength/Small Screw . . . . . . . . . . . . . . . . . . . . . . . 5221472 Loctite® 5920™ Flange Sealant, Copper High Perf. RTV Sil. Gasket Mkr. . . . . . . . . 36, 3721525 Loctite® 509™ Gasket Eliminator® Flange Sealant, Flexible . . . . . . . . . . . . . . . . . . . 34, 3521744 Loctite® 5999™ Flange Sealant, Heavy Body/Grey High Perf. RTV Silicone . . . . . . 36, 3721746 Loctite® 5910® Flange Sealant, RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 3721747 Loctite® 5910® Flange Sealant, RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 3721748 Loctite® 5910® Flange Sealant, RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 3721921 Loctite® 426™ Prism® Instant Adhesive, Black/Toughened Gel . . . . . . . . . . . . . . . . . . 1421922 Loctite® 409™ Super Bonder® Instant Adhesive, Industrial Grade Gel . . . . . . . . . . . . . 1421923 Loctite® 4212™ Prism® Instant Adhesive, Thermal Resistant Gel . . . . . . . . . . . . . . 13, 1521924 Loctite® 499™ Super Bonder® Instant Adhesive, Thermal Cycling Resistant Gel . . . . . 1521925 Loctite® 454™ Prism® Instant Adhesive, Surface Insensitive Gel . . . . . . . . . . . . . . . . . 1422041 Loctite® 220™ Threadlocker, Wicking Grade/Low Strength . . . . . . . . . . . . . . . 52, 96, 9722205 Loctite® 222MS™ Threadlocker, Low Strength/Small Screw . . . . . . . . . . . . . . . . . 50, 5222221 Loctite® 222MS™ Threadlocker, Low Strength/Small Screw . . . . . . . . . . . 50, 52, 96, 9722231 Loctite® 222MS™ Threadlocker, Low Strength/Small Screw . . . . . . . . . . . 50, 52, 96, 9722241 Loctite® 222MS™ Threadlocker, Low Strength/Small Screw . . . . . . . . . . . 50, 52, 96, 9722309 Loctite® 455™ Prism® Instant Adhesive Gel, Low Odor/Low Bloom . . . . . . . . . . . . . . 1522355 Loctite® ODC-Free Cleaner & Degreaser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 74, 7522423 Loctite® 518™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3522424 Loctite® 518™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3522440 Loctite® 7109™ Tak Pak II® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4922477 Loctite® 7471™ Primer T™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4922671 Loctite® 7075™ Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 4923034 Loctite® 7109™ Tak Pak II® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4923440 Loctite® 3341™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . 58, 6023690 Loctite® 3102™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3023691 Loctite® 3103™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 3023692 Loctite® 3103™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 3023693 Loctite® 3104™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3023694 Loctite® 3104™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3023695 Loctite® 3105™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 3023696 Loctite® 3105™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 3023697 Loctite® 3106™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 30
23698 Loctite® 3106™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 3023792 Loctite® 3341™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . 58, 6023811 Loctite® Natural Blue® Biodegradable Cleaner & Degreaser, Fragrance-Free. . . 72, 74, 7523977 Loctite® 243™ Threadlocker, Medium Strength/Oil Resistant . . . . . . . . . . . . . . . . . 50, 5224018 Loctite® 574™ Flange Sealant, Fast Curing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3524077 Loctite® 243™ Threadlocker, Medium Strength/Oil Resistant . . . . . . . . . . . . . . . . . 50, 5224078 Loctite® 243™ Threadlocker, Medium Strength/Oil Resistant . . . . . . . . . . . . . . . . . 50, 5224079 Loctite® 243™ Threadlocker, Medium Strength/Oil Resistant . . . . . . . . . . . . . . . . . 50, 5224205 Loctite® 242® Threadlocker, Medium Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50, 5224221 Loctite® 242® Threadlocker, Medium Strength . . . . . . . . . . . . . . . . . . . . . . 50, 52, 96, 9724231 Loctite® 242® Threadlocker, Medium Strength . . . . . . . . . . . . . . . . . . . . . . 50, 52, 96, 9724241 Loctite® 242® Threadlocker, Medium Strength . . . . . . . . . . . . . . . . . . . . . . 50, 52, 96, 9724243 Loctite® 242® Threadlocker, Medium Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50, 5224379 Loctite® Electrical Contact Cleaner, Non-Flammable . . . . . . . . . . . . . . . . . . . . 73, 74, 7524690 Loctite® 3381™ Light Cure Adhesive, Flexible/Plastics . . . . . . . . . . . . . . . . . . . . . . 58, 6024707 Loctite® 5960™ Fastgasket® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 3725062 Loctite® Anaerobic Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4925523 Loctite® 2432™ Threadlocker, Low Halogen/Low Sulfur. . . . . . . . . . . . . . . . . . . . . 51, 5225524 Loctite® 5772™ Thread Sealant, Low Halogen/Low Sulfur . . . . . . . . . . . . . . . . . . . 55, 5625785 Loctite® 3381™ Light Cure Adhesive, Flexible/Plastics . . . . . . . . . . . . . . . . . . . . . . 58, 6025791 Loctite® Electrical Contact & Parts Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73, 74, 7525882 Loctite® 554™ Thread Sealant, Refrigerant Sealant . . . . . . . . . . . . . . . . . . . . . . . . 54, 5626205 Loctite® 262™ Threadlocker, Medium to High Strength . . . . . . . . . . . . . . . . . . . . . 50, 5226221 Loctite® 262™ Threadlocker, Medium to High Strength . . . . . . . . . . . . . . . 50, 52, 96, 9726231 Loctite® 262™ Threadlocker, Medium to High Strength . . . . . . . . . . . . . . . 50, 52, 96, 9726241 Loctite® 262™ Threadlocker, Medium to High Strength . . . . . . . . . . . . . . . 50, 52, 96, 9726243 Loctite® 262™ Threadlocker, Medium to High Strength . . . . . . . . . . . . . . . . . . . . . 50, 5226324 Loctite® 4204™ Prism® Instant Adhesive, Thermally Resistant. . . . . . . . . . . . . . . . 13, 1526325 Loctite® 4204™ Prism® Instant Adhesive, Thermally Resistant. . . . . . . . . . . . . . . . 13, 1526338 Loctite® 574™ Flange Sealant, Fast Curing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3526392 Loctite® 573™ Flange Sealant, Medium Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3526772 Loctite® 266™ Threadlocker, High Strength/High Temperature. . . . . . . . . . . . . . . . 50, 5226773 Loctite® 266™ Threadlocker, High Strength/High Temperature. . . . . . . . . . . . . . . . 50, 5226774 Loctite® 266™ Threadlocker, High Strength/High Temperature. . . . . . . . . . . . . . . . 50, 5227105 Loctite® 271™ Threadlocker, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 5227121 Loctite® 271™ Threadlocker, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 5227131 Loctite® 271™ Threadlocker, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 5227141 Loctite® 271™ Threadlocker, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 5227143 Loctite® 271™ Threadlocker, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 5227240 Loctite® 272™ Threadlocker 272 High Strength/High Temperature . . . . . . . . . . . . 51, 5227270 Loctite® 272™ Threadlocker 272 High Strength/High Temperature . . . . . . . . . . . . 51, 5227285 Loctite® 272™ Threadlocker 272 High Strength/High Temperature . . . . . . . . . . . . 51, 5227731 Loctite® 277™ Threadlocker, High Strength/Large Threads . . . . . . . . . . . . . . . . . . 51, 5227741 Loctite® 277™ Threadlocker, High Strength/Large Threads . . . . . . . . . . . . . . . . . . 51, 5227743 Loctite® 277™ Threadlocker, High Strength/Large Threads . . . . . . . . . . . . . . . . . . 51, 5227934 Loctite® 294™ Threadlocker, Wicking Grade/High Temperature . . . . . . . . . . . . . . . 51, 5227935 Loctite® 294™ Threadlocker, Wicking Grade/High Temperature . . . . . . . . . . . . . . . 51, 5227936 Loctite® 294™ Threadlocker, Wicking Grade/High Temperature . . . . . . . . . . . . . . . 51, 5227937 Loctite® 294™ Threadlocker, Wicking Grade/High Temperature . . . . . . . . . . . . . . . 51, 5228026 Loctite® 4203™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . 1528027 Loctite® 4203™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . 1528028 Loctite® 4205™ Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . 1528029 Loctite® 4205™ Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . 1528030 Loctite® 4205™ Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . 1528298 Loctite® 5999™ Flange Sealant, Heavy Body/Grey High Perf. RTV Silicone . . . . . . 36, 3728366 Loctite® 3491™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 29, 3028367 Loctite® 3492™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 29, 3028368 Loctite® 3493™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3028400 Loctite® 3108™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 3028419 Loctite® 3107™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 3028465 Loctite® 3108™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 3028466 Loctite® 3107™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 3028554 Loctite® 5205™ Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3528588 Loctite® U-09LV™ Hysol® Urethane Adhesive, Low Viscosity . . . . . . . . . . . . . . . . 17, 2028589 Loctite® U-09LV™ Hysol® Urethane Adhesive, Low Viscosity . . . . . . . . . . . . . . . . 17, 2028590 Loctite® U-09LV™ Hysol® Urethane Adhesive, Low Viscosity . . . . . . . . . . . . . . . . 17, 2028591 Loctite® U-09LV™ Hysol® Urethane Adhesive, Low Viscosity . . . . . . . . . . . . . . . . 17, 2028628 Loctite® 4206™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
BY
PR
OD
UC
T &
IT
EM
NU
MB
ER
IND
EX
138 NOTE: Can’t find a Loctite® product/item number? Contact Customer Service for assistance at: 1-800-243-4874.
28629 Loctite® 4206™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6128654 Loctite® Form-A-Thread® Stripped Thread Repair Kit . . . . . . . . . . . . . . . . . . . . . 104, 10528753 Loctite® 564™ Thread Sealant, General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9928754 Loctite® 564™ Thread Sealant, General Purpose . . . . . . . . . . . . . . . . . . . . 54, 56, 98, 9928755 Loctite® 564™ Thread Sealant, General Purpose . . . . . . . . . . . . . . . . . . . . 54, 56, 98, 9928802 Loctite® 641™ Retaining Compound, Press & Slip Fits/Controlled Strength . . . . . 46, 4729005 Loctite® 290™ Threadlocker, Wicking Grade. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 5229021 Loctite® 290™ Threadlocker, Wicking Grade. . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 96, 9729031 Loctite® 290™ Threadlocker, Wicking Grade. . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 96, 9729041 Loctite® 290™ Threadlocker, Wicking Grade. . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 96, 9729043 Loctite® 290™ Threadlocker, Wicking Grade. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 5229287 Loctite® 5950™ Fastgasket® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 3729289 Loctite® E-00CL™ Hysol® Epoxy Adhesive, Low Odor. . . . . . . . . . . . . . . . . . . . . . . 16, 1829290 Loctite® E-00CL™ Hysol® Epoxy Adhesive, Low Odor. . . . . . . . . . . . . . . . . . . . . . . 16, 1829291 Loctite® E-00CL™ Hysol® Epoxy Adhesive, Low Odor. . . . . . . . . . . . . . . . . . . . . . . 16, 1829294 Loctite® E-00NS™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . 16, 1829295 Loctite® E-00NS™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . 16, 1829296 Loctite® E-00NS™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . 16, 1829299 Loctite® E-05CL™ Hysol® Epoxy Adhesive, Toughened. . . . . . . . . . . . . . . . . . . . . . 16, 1829300 Loctite® E-05CL™ Hysol® Epoxy Adhesive, Toughened. . . . . . . . . . . . . . . . . . . . . . 16, 1829301 Loctite® E-05CL™ Hysol® Epoxy Adhesive, Toughened. . . . . . . . . . . . . . . . . . . . . . 16, 1829302 Loctite® E-05CL™ Hysol® Epoxy Adhesive, Toughened. . . . . . . . . . . . . . . . . . . . . . 16, 1829303 Loctite® E-05CL™ Hysol® Epoxy Adhesive, Toughened. . . . . . . . . . . . . . . . . . . . . . 16, 1829304 Loctite® E-40FL™ Hysol® Epoxy Adhesive, Flexible. . . . . . . . . . . . . . . . . . . . . . . . . 16, 1929305 Loctite® E-40FL™ Hysol® Epoxy Adhesive, Flexible. . . . . . . . . . . . . . . . . . . . . . . . . 16, 1929306 Loctite® E-40FL™ Hysol® Epoxy Adhesive, Flexible. . . . . . . . . . . . . . . . . . . . . . . . . 16, 1929309 Loctite® E-90FL™ Hysol® Epoxy Adhesive, Flexible. . . . . . . . . . . . . . . . . . . . . . . . . 17, 1929310 Loctite® E-90FL™ Hysol® Epoxy Adhesive, Flexible. . . . . . . . . . . . . . . . . . . . . . . . . 17, 1929311 Loctite® E-90FL™ Hysol® Epoxy Adhesive, Flexible. . . . . . . . . . . . . . . . . . . . . . . . . 17, 1929314 Loctite® E-20HP™ Hysol® Epoxy Adhesive, Fast Setting . . . . . . . . . . . . . . . . . . . . . 16, 1829315 Loctite® E-20HP™ Hysol® Epoxy Adhesive, Fast Setting . . . . . . . . . . . . . . . . . . . . . 16, 1829316 Loctite® E-20HP™ Hysol® Epoxy Adhesive, Fast Setting . . . . . . . . . . . . . . . . . . . . . 16, 1829317 Loctite® E-20HP™ Hysol® Epoxy Adhesive, Fast Setting . . . . . . . . . . . . . . . . . . . . . 16, 1829318 Loctite® E-20HP™ Hysol® Epoxy Adhesive, Fast Setting . . . . . . . . . . . . . . . . . . . . . 16, 1829319 Loctite® E-60HP™ Hysol® Epoxy Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . 16, 1929320 Loctite® E-60HP™ Hysol® Epoxy Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . 16, 1929321 Loctite® E-60HP™ Hysol® Epoxy Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . 16, 1929322 Loctite® E-60HP™ Hysol® Epoxy Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . 16, 1929323 Loctite® E-60HP™ Hysol® Epoxy Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . 16, 1929324 Loctite® E-60NC™ Hysol® Epoxy Adhesive, Electrically Non-Corrosive. . . . . . . . . . 17, 1929325 Loctite® E-60NC™ Hysol® Epoxy Adhesive, Electrically Non-Corrosive. . . . . . . . . . 17, 1929326 Loctite® E-60NC™ Hysol® Epoxy Adhesive, Electrically Non-Corrosive. . . . . . . . . . 17, 1929329 Loctite® E-30CL™ Hysol® Epoxy Adhesive, Glass Bonder . . . . . . . . . . . . . . . . . . . . 16, 1929330 Loctite® E-30CL™ Hysol® Epoxy Adhesive, Glass Bonder . . . . . . . . . . . . . . . . . . . . 16, 1929331 Loctite® E-30CL™ Hysol® Epoxy Adhesive, Glass Bonder . . . . . . . . . . . . . . . . . . . . 16, 1929334 Loctite® E-20NS™ Hysol® Epoxy Adhesive, Metal Bonder. . . . . . . . . . . . . . . . . . . . 16, 1929335 Loctite® E-20NS™ Hysol® Epoxy Adhesive, Metal Bonder. . . . . . . . . . . . . . . . . . . . 16, 1929336 Loctite® E-20NS™ Hysol® Epoxy Adhesive, Metal Bonder. . . . . . . . . . . . . . . . . . . . 16, 1929339 Loctite® E-214HP™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . 17, 1929340 Loctite® E-214HP™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . 17, 1929348 Loctite® U-05FL™ Hysol® Urethane Adhesive, High Strength . . . . . . . . . . . . . . . . . 17, 2029349 Loctite® U-05FL™ Hysol® Urethane Adhesive, High Strength . . . . . . . . . . . . . . . . . 17, 2029350 Loctite® U-05FL™ Hysol® Urethane Adhesive, High Strength . . . . . . . . . . . . . . . . . 17, 2029353 Loctite® E-120HP™ Hysol® Epoxy Adhesive, Ultra Strength . . . . . . . . . . . . . . . . . . 17, 1929354 Loctite® E-120HP™ Hysol® Epoxy Adhesive, Ultra Strength . . . . . . . . . . . . . . . . . . 17, 1929355 Loctite® E-120HP™ Hysol® Epoxy Adhesive, Ultra Strength . . . . . . . . . . . . . . . . . . 17, 1929356 Loctite® E-120HP™ Hysol® Epoxy Adhesive, Ultra Strength . . . . . . . . . . . . . . . . . . 17, 1929357 Loctite® E-120HP™ Hysol® Epoxy Adhesive, Ultra Strength . . . . . . . . . . . . . . . . . . 17, 1929370 Loctite® U-09FL™ Hysol® Urethane Adhesive, Highly Flexible. . . . . . . . . . . . . . . . . 17, 2029371 Loctite® U-09FL™ Hysol® Urethane Adhesive, Highly Flexible. . . . . . . . . . . . . . . . . 17, 2029460 Loctite® U-09FL™ Hysol® Urethane Adhesive, Highly Flexible. . . . . . . . . . . . . . . . . 17, 2029461 Loctite® U-09FL™ Hysol® Urethane Adhesive, Highly Flexible. . . . . . . . . . . . . . . . . 17, 2029462 Loctite® U-09FL™ Hysol® Urethane Adhesive, Highly Flexible. . . . . . . . . . . . . . . . . 17, 2029487 Loctite® 3494™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 3029505 Loctite® 3175™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 3029506 Loctite® 3175™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 3029513 Loctite® 246™ Threadlocker, Medium Strength/High Temperature . . . . . . . . . . . . . 50, 5229514 Loctite® 246™ Threadlocker, Medium Strength/High Temperature . . . . . . . . . . . . . 50, 52
29515 Loctite® 246™ Threadlocker, Medium Strength/High Temperature . . . . . . . . . . . . . 50, 5229709 Krytox® RFE PFPE High Performance Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . 88, 9029710 Krytox® RFE PFPE Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88, 9029711 Krytox® RFE PFPE High Performance Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . 88, 9030138 Krytox® RFE Advanced PTFE Dry Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 9030220 Loctite® 3525™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 3030221 Loctite® 3525™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 3030287 Loctite® 660™ Quick Metal® Retaining Compound, Press Fit Repair . . . . . . . . . . . . . . 4730288 Loctite® 3335™ Light Cure Adhesive, UV Cationic Epoxy . . . . . . . . . . . . . . . . . . . . 29, 3130289 Loctite® 3335™ Light Cure Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 3130507 Loctite® Instant Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 86, 8730509 Loctite® Instant Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 86, 8730510 Loctite® Gasket Sealant 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 8730511 Loctite® Gasket Sealant 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 8730512 Loctite® Gasket Sealant 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 8730513 Loctite® Gasket Sealant 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 8730514 Loctite® Gasket Sealant 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 8730515 Loctite® Gasket Sealant 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 8730516 Loctite® Aviation Gasket Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 8730517 Loctite® Aviation Gasket Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 8730518 Loctite® Superflex® Blue RTV, Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . 85, 8730521 Loctite® Pro Strength Degreaser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 74, 7530522 Loctite® Hydraulic Jack Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 9130523 Loctite® Hydraulic Jack Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 9130524 Loctite® Hi-Tack Gasket Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 8730525 Loctite® Hi-Tack Gasket Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 8730526 Loctite® Hi-Tack Gasket Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 8730527 Loctite® Belt Dressing & Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 7730529 Loctite® Pro Strength Varnish Remover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73, 74, 7530530 Loctite® White Lithium Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 9130533 Loctite® Superflex® Blue RTV, Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . 85, 8730534 Loctite® Thread Sealant with PTFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9930535 Loctite® Copper Gasket Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 8730536 Loctite® Dielectric Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 9130537 Loctite® Contact Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 6330538 Loctite® Heavy-Duty Rubberized Undercoating . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 7730539 Loctite® Extend® Rust Treatment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 7730540 Loctite® Black Contact Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 6330541 Loctite® Superflex® Blue RTV, Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . 85, 8730542 Loctite® 5920™ Copper, High Perf. RTV Sil. Gasket Mkr. . . . . . . . . . . . . . . 36, 37, 85, 8730543 Loctite® White Lithium Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 9130544 Loctite® All-Purpose Spray Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6330545 Loctite® Non-Chlorinated Parts Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 74, 7530546 Loctite® Multi-Purpose Glass Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73, 74, 7530548 Loctite® Pro Strength Parts Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 74, 7530556 Loctite® Pipe Joint Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9930557 Loctite® Pipe Joint Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9930558 Loctite® High Temperature Gasket Maker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 8730560 Loctite® Superflex® Blue RTV, Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . 85, 8730561 Loctite® Thread Sealant with PTFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9930562 Loctite® Superflex® RTV, Clear Silicone Adhesive Sealant. . . . . . . . . . . . . . . . . . . . 85, 8730563 Loctite® Superflex® RTV, Black Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . 85, 8730564 Loctite® Superflex® Red High Temp RTV, Silicone Adhesive Sealant . . . . . . . . . . . 85, 8730565 Loctite® Aqua Power® Biodegradable Cleaner & Degreaser . . . . . . . . . . . . . . . 72, 74, 7530567 Loctite® 587™ Blue, High Performance RTV Silicone Gasket Maker. . . . . . . . . . . . 85, 8730615 Krytox® RFE Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 9030671 Loctite® M-21HP™ Hysol® Medical Device Epoxy Adhesive . . . . . . . . . . . . . . . . . . 59, 6130673 Loctite® M-31CL™ Hysol® Medical Device Epoxy Adhesive . . . . . . . . . . . . . . . . . . 59, 6130674 Loctite® M-31CL™ Hysol® Medical Device Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . 6130678 Loctite® M-11FL™ Hysol® Medical Device Urethane Adhesive . . . . . . . . . . . . . . . . 59, 6130680 Loctite® M-121HP™ Hysol® Medical Device Epoxy Adhesive . . . . . . . . . . . . . . . . . 59, 6130684 Loctite® Instant Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 86, 8730688 Loctite® 3345™ Light Cure Adhesive, Glass/Metal . . . . . . . . . . . . . . . . . . . . . . . . . 58, 6030756 Loctite® 3526™ Light Cure Acrylic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 29, 3030764 Loctite® 3526™ Light Cure Acrylic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 3030765 Loctite® 3494™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 3031064 Loctite® 3336™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 3131065 Loctite® 3336™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 31
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
BY
PR
OD
UC
T &
ITE
M N
UM
BE
RIN
DE
X
139NOTE: Can’t find a Loctite® product/item number? Contact Customer Service for assistance at: 1-800-243-4874.
31132 Loctite® 5960™ Fastgasket® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 3731231 Loctite® 312™ Speedbonder™ Structural Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . 1031243 Loctite® 312™ Speedbonder™ Structural Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . 1031279 Loctite® 3631™ Hysol® Hot Melt Adhesive, Urethane . . . . . . . . . . . . . . . . . . . . . . . 24, 2731291 Loctite® 3631™ Hysol® Hot Melt Adhesive, Urethane . . . . . . . . . . . . . . . . . . . . . . . 24, 2731297 Loctite® 3650™ Hysol® Hot Melt Adhesive, Polyolefin . . . . . . . . . . . . . . . . . . . . . . . . . 4431302 Loctite® 3650™ Hysol® Hot Melt Adhesive, Polyolefin . . . . . . . . . . . . . . . . . . . . . . . . . 4431303 Loctite® 3651™ Hysol® Hot Melt Adhesive, Polyolefin . . . . . . . . . . . . . . . . . . . 24, 27, 4431360 Krytox® RFE PFPE Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88, 9031361 Krytox® RFE PFPE Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88, 9031362 Loctite® Manufacturing Reliability Toolbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104, 10532037 Loctite® 3936™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6032040 Loctite® 3933™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6032047 Loctite® 3922™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 6032083 Loctite® 3922™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 6032084 Loctite® 3933™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6032254 Loctite® 4304™ Flashcure® Light Cure Adhesive, Instant . . . . . . . . . . . . . . . . 29, 31, 6032268 Loctite® 4305™ Flashcure® Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . 29, 31, 6032304 Loctite® 3936™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6032407 Loctite® 4304™ Flashcure® Light Cure Adhesive, Instant . . . . . . . . . . . . . . . . 29, 31, 6032409 Loctite® 4305™ Flashcure® Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . 29, 31, 6032429 Loctite® 545™ Thread Sealant, Hydraulic/Pneumatic Fittings . . . . . . . . . . . 54, 56, 98, 9932430 Loctite® 324™ Speedbonder™ Structural Adhesive, High Impact . . . . . . . . . . . . . . . 8, 1032490 Loctite® 324™ Speedbonder™ Structural Adhesive, High Impact . . . . . . . . . . . . . . . 8, 1032525 Loctite® 2760™ Threadlocker, Primerless/High Strength . . . . . . . . . . . . . . . . . . . . 51, 5232526 Loctite® 2760™ Threadlocker, Primerless/High Strength . . . . . . . . . . . . . . . . . . . . 51, 5232527 Loctite® 2760™ Threadlocker, Primerless/High Strength . . . . . . . . . . . . . . . . . . . . 51, 5232528 Loctite® 2760™ Threadlocker, Primerless/High Strength . . . . . . . . . . . . . . . . . . . . 51, 5232530 Loctite® 325™ Speedbonder™ Structural Adhesive, High Temperature . . . . . . . . . . 8, 1032545 Loctite® 3400™ OptiLOC® Fiber Optic Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . 22, 2332546 Loctite® 3401™ OptiLOC® Fiber Optic Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . 22, 2332547 Loctite® 3402™ OptiLOC® Fiber Optic Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . 22, 2332550 Loctite® 3403™ OptiLOC® Fiber Optic Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . 22, 2332586 Loctite® 325™ Speedbonder™ Structural Adhesive, High Temperature . . . . . . . . . . 8, 1032629 Loctite® 326™ Speedbonder™ Structural Adhesive, Fast Fixture . . . . . . . . . . . . . . . 8, 1032685 Loctite® 326™ Speedbonder™ Structural Adhesive, Fast Fixture . . . . . . . . . . . . . . . 8, 1033058 Loctite® 330™ Depend® Adhesive, No-Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 1033064 Loctite® 330™ Depend® Adhesive, No-Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 1033081 Loctite® 330™ Depend® Adhesive, No-Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 1033201 Loctite® 332™ Structural Adhesive, Severe Environment . . . . . . . . . . . . . . . . . . . . . 8, 1033241 Loctite® 567™ PST® Thread Sealant, High Temperature . . . . . . . . . . . . . . . 55, 56, 98, 9933275 Loctite® 332™ Structural Adhesive, Severe Environment . . . . . . . . . . . . . . . . . . . . . 8, 1033290 Loctite® 332™ Structural Adhesive, Severe Environment . . . . . . . . . . . . . . . . . . . . . 8, 1033403 Loctite® 334™ Structural Adhesive, High Performance. . . . . . . . . . . . . . . . . . . . . . . . . 1033417 Loctite® 3345™ Light Cure Adhesive, Glass/Metal . . . . . . . . . . . . . . . . . . . . . . 23, 58, 6033470 Loctite® 334™ Structural Adhesive, High Performance. . . . . . . . . . . . . . . . . . . . . . . . . 1033486 Loctite® Maintenance Tackle Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104, 10533510 Loctite® Fixmaster® Super Grout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 8333946 Loctite® 2440™ Threadlocker, Primerless/Medium Strength . . . . . . . . . . . . . . . . . 51, 5233947 Loctite® 2440™ Threadlocker, Primerless/Medium Strength . . . . . . . . . . . . . . . . . 51, 5233948 Loctite® 2440™ Threadlocker, Primerless/Medium Strength . . . . . . . . . . . . . . . . . 51, 5234018 Loctite® 598™ Black, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . 85, 8734026 Loctite® Marine Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6734337 Loctite® 5963™ Procure™ Cure-In-Place Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3734347 Loctite® 5964™ Procure™ Cure-In-Place Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3734348 Loctite® 5964™ Procure™ Cure-In-Place Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3734395 Loctite® Marine Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6734517 Loctite® White Hi-Temp Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6734518 Loctite® White Hi-Temp Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6734663 Loctite® Chisel® MC-Free Gasket Remover . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73, 74, 7534759 Loctite® 564™ Thread Sealant, General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9934894 Loctite® Color Guard®, Tough Rubber Coating/Black . . . . . . . . . . . . . . . . . . . . . . . 76, 7734895 Loctite® Color Guard®, Tough Rubber Coating/Blue . . . . . . . . . . . . . . . . . . . . . . . . 76, 7734896 Loctite® Color Guard®, Tough Rubber Coating/Red . . . . . . . . . . . . . . . . . . . . . . . . 76, 7734897 Loctite® Color Guard®, Tough Rubber Coating/Yellow . . . . . . . . . . . . . . . . . . . . . . 76, 7734931 Loctite® 349™ Impruv® Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3034943 Loctite® Industrial Hand Wipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73, 74, 7534944 Loctite® Industrial Hand Wipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73, 74, 75
34979 Loctite® Color Guard®, Tough Rubber Coating/Black . . . . . . . . . . . . . . . . . . . . . . . 76, 7734980 Loctite® Color Guard®, Tough Rubber Coating/Black . . . . . . . . . . . . . . . . . . . . . . . 76, 7734981 Loctite® Color Guard®, Tough Rubber Coating/Black . . . . . . . . . . . . . . . . . . . . . . . 76, 7734982 Loctite® Color Guard®, Tough Rubber Coating/Blue . . . . . . . . . . . . . . . . . . . . . . . . 76, 7734983 Loctite® Color Guard®, Tough Rubber Coating/Blue . . . . . . . . . . . . . . . . . . . . . . . . 76, 7734984 Loctite® Color Guard®, Tough Rubber Coating/Blue . . . . . . . . . . . . . . . . . . . . . . . . 76, 7734985 Loctite® Color Guard®, Tough Rubber Coating/Red . . . . . . . . . . . . . . . . . . . . . . . . 76, 7734986 Loctite® Color Guard®, Tough Rubber Coating/Red . . . . . . . . . . . . . . . . . . . . . . . . 76, 7734987 Loctite® Color Guard®, Tough Rubber Coating/Red . . . . . . . . . . . . . . . . . . . . . . . . 76, 7734988 Loctite® Color Guard®, Tough Rubber Coating/Yellow . . . . . . . . . . . . . . . . . . . . . . 76, 7734989 Loctite® Color Guard®, Tough Rubber Coating/Yellow . . . . . . . . . . . . . . . . . . . . . . 76, 7734990 Loctite® 349™ Impruv® Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3034991 Loctite® Color Guard®, Tough Rubber Coating/Yellow . . . . . . . . . . . . . . . . . . . . . . 76, 7734994 Loctite® Primer for Color Guard® Tough Rubber Coating . . . . . . . . . . . . . . . . . . . . . . . 7734995 Loctite® Thinner for Color Guard® Tough Rubber Coating . . . . . . . . . . . . . . . . . . . . . . 7735082 Loctite® 55™ Pipe Sealing Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9935173 Loctite® 3407™ OptiLOC® Fiber Optic Adhesive, Silicone/Heat Cure. . . . . . . . . . . . . . . 2335241 Loctite® 352™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 3035286 Loctite® 352™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 3035533 Loctite® 4500™ Prism® Instant Adhesive, Fast Curing/Surface Insensitive Gel . . . 13, 1535534 Loctite® 4500™ Prism® Instant Adhesive, Fast Curing/Surface Insensitive Gel . . . 13, 1535813 Loctite® 4500™ Prism® Instant Adhesive, Fast Curing/Surface Insensitive Gel . . . 13, 1535814 Loctite® 4500™ Prism® Instant Adhesive, Fast Curing/Surface Insensitive Gel . . . 13, 1535939 Loctite® H8000™ Speedbonder™ Structural Adhesive., Fast Fixture. . . . . . . . . . . . . 9, 1135940 Loctite® H8000™ Speedbonder™ Structural Adhesive, Fast Fixture . . . . . . . . . . . . . 9, 1136057 Loctite® 3337™ Light Cure Adhesive, UV Cationic Epoxy . . . . . . . . . . . . . . . . . 23, 29, 3136058 Loctite® 3337™ Light Cure Adhesive, UV Cationic Epoxy . . . . . . . . . . . . . . . . . . . . 29, 3136132 Loctite® Urethane Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104, 10536160 Loctite® H8000™ Speedbonder™ Structural Adhesive, Fast Fixture . . . . . . . . . . . . . 9, 1136294 Loctite® 3972™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . 58, 6036295 Loctite® 3972™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . 58, 6036331 Loctite® 363™ Impruv® Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3036334 Loctite® Magna-Crete Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8336354 Loctite® Heavy Duty Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6736390 Loctite® 363™ Impruv® Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3036437 Loctite® 3941™ Light Cure Adhesive, High Performance/Various Substrates. . . . . 58, 6036476 Loctite® 3941™ Light Cure Adhesive, High Performance/Various Substrates. . . . . 58, 6036478 Loctite® 3943™ Light Cure Adhesive, High Performance/Various Substrates. . . . . 58, 6036480 Loctite® 3943™ Light Cure Adhesive, High Performance/Various Substrates. . . . . 58, 6036481 Loctite® 3942™ Light Cure Adhesive, High Performance/Various Substrates. . . . . 58, 6036483 Loctite® 3942™ Light Cure Adhesive, High Performance/Various Substrates. . . . . 58, 6036484 Loctite® 3921™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 6036485 Loctite® 3921™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 6036488 Loctite® 3924™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 6036489 Loctite® 3924™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 6036492 Loctite® 3926™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 6036493 Loctite® 3926™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 58, 6036536 Loctite® 3911™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6036537 Loctite® 3911™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6036539 Loctite® 3912™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6036540 Loctite® 3912™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6036631 Loctite® 366™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3036646 Loctite® Non-Flammable Contact Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73, 74, 7536766 Loctite® 3981™ Hysol® Epoxy Adhesive, High Performance/Various Substrates . . 59, 6136767 Loctite® 3982™ Hysol® Epoxy Adhesive, High Performance/Various Substrates . . 59, 6136768 Loctite® 3984™ Hysol® Epoxy Adhesive, High Performance/Various Substrates . . 59, 6136780 Loctite® ViperLube® High Performance Synthetic Grease . . . . . . . . . . . . . . . . . 88, 90, 9136781 Loctite® ViperLube® High Performance Synthetic Grease . . . . . . . . . . . . . . . . . 88, 90, 9136782 Loctite® ViperLube® High Performance Synthetic Grease . . . . . . . . . . . . . . . . . 88, 90, 9136783 Loctite® ViperLube® High Performance Synthetic Grease . . . . . . . . . . . . . . . . . 88, 90, 9136784 Loctite® ViperLube® High Performance Synthetic Grease . . . . . . . . . . . . . . . . . 88, 90, 9136786 Loctite® ViperLube® High Performance Synthetic Grease . . . . . . . . . . . . . . . . . 88, 90, 9136787 Loctite® ViperLube® High Performance Synthetic Lubricant, Gear Oil-90W . . . 88, 90, 9136788 Loctite® ViperLube® High Perf. Synthetic Lubricant, Lightweight Oil-10W . . . . 88, 90, 9136791 Loctite® 3913™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6036792 Loctite® 3971™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . 58, 6036804 Loctite® 3913™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6036805 Loctite® 3971™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . 58, 60
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
BY
PR
OD
UC
T &
IT
EM
NU
MB
ER
IND
EX
140 NOTE: Can’t find a Loctite® product/item number? Contact Customer Service for assistance at: 1-800-243-4874.
36906 Loctite® 3340™ Light Cure Adhesive, UV Cationic Epoxy . . . . . . . . . . . . . . . . . 23, 29, 3136907 Loctite® 3340™ Light Cure Adhesive, UV Cationic Epoxy . . . . . . . . . . . . . . . . . . . . 29, 3136923 Loctite® 5905™ Flange Sealant, RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 3737061 Loctite® ViperLube® High Performance Synthetic Grease . . . . . . . . . . . . . . . . . 88, 90, 9137087 Loctite® 248™ Threadlocker Stick, Medium Strength/Removable . . . . . . . . . . . . . 96, 9737127 Loctite® QuickStix™ 561™ PST® Pipe Sealant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9937220 Loctite® 3030™ Adhesive, Polyolefin Bonder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 1137229 Loctite® QuickStix™ C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . 64, 66, 6737230 Loctite® QuickStix™ Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6737297 Loctite® 3981™ Hysol® Epoxy Adhesive, High Performance/Various Substrates . . 59, 6137298 Loctite® 3982™ Hysol® Epoxy Adhesive, High Performance/Various Substrates . . 59, 6137299 Loctite® 3984™ Hysol® Epoxy Adhesive, High Performance/Various Substrates . . 59, 6137312 Loctite® Maximum Strength Headliner Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6337316 Loctite® Fixmaster® Marine Chocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 8337388 Loctite® 220™ Threadlocker, Wicking Grade/Low Strength . . . . . . . . . . . . . . . 52, 96, 9737439 Loctite® 4306™ Flashcure® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . 29, 31, 59, 6037441 Loctite® 4307™ Flashcure® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . 29, 31, 59, 6037442 Loctite® 4306™ Flashcure® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . 29, 31, 59, 6037443 Loctite® 4307™ Flashcure® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . 29, 31, 59, 6037684 Loctite® 248™ Threadlocker Stick, Medium Strength/Removable . . . . . . . . . . . . . 96, 9737685 Loctite® 268™ Threadlocker Stick, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . 96, 9737686 Loctite® 268™ Threadlocker Stick, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . 96, 9737708 Loctite® 4861™ Prism® Instant Adhesive, Flexible . . . . . . . . . . . . . . . . . . . 13, 15, 59, 6137710 Loctite® ViperLube® High Performance Synthetic Grease . . . . . . . . . . . . . . . . . 88, 90, 9137711 Loctite® 4861™ Prism® Instant Adhesive, Flexible . . . . . . . . . . . . . . . . . . . 13, 15, 59, 6137719 Loctite® Fixmaster® Instant Belt Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70, 7137732 Loctite® 4851™ Prism® Instant Adhesive, Flexible . . . . . . . . . . . . . . . . . . . 13, 15, 59, 6137733 Loctite® 4851™ Prism® Instant Adhesive, Flexible . . . . . . . . . . . . . . . . . . . 13, 15, 59, 6137795 Loctite® 542™ Thread Sealant, Fine Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54, 5638004 Loctite® 380™ Black Max® Instant Adhesive, Toughened . . . . . . . . . . . . . . 12, 14, 62, 6338050 Loctite® 380™ Black Max® Instant Adhesive, Toughened . . . . . . . . . . . . . . 12, 14, 62, 6338061 Loctite® 380™ Black Max® Instant Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . 12, 1438145 Loctite® 4501™ Prism® Instant Adhesive, Wicking Viscosity . . . . . . . . . . . . . . . . 13, 1538146 Loctite® 4501™ Prism® Instant Adhesive, Wicking Viscosity . . . . . . . . . . . . . . . . 13, 1538147 Loctite® 4501™ Prism® Instant Adhesive, Wicking Viscosity . . . . . . . . . . . . . . . . 13, 1538181 Loctite® Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6738203 Loctite® 382™ Tak Pak® Instant Adhesive, Ultra Performance . . . . . . . . . . . . . . . . . . . 1438210 Loctite® 3944™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6038212 Loctite® 3944™ Light Cure Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6038240 Loctite® 382™ Tak Pak® Instant Adhesive, Ultra Performance . . . . . . . . . . . . . . . . . . . 1438261 Loctite® 382™ Tak Pak® Instant Adhesive, Ultra Performance . . . . . . . . . . . . . . . . . . . 1438350 Loctite® ViperLube® High Performance Synthetic Lubricant, Gear Oil-90W . . . 88, 90, 9138351 Loctite® ViperLube® High Performance Synthetic Lubricant, Gear Oil-90W . . . 88, 90, 9138352 Loctite® ViperLube® High Perf. Synthetic Lubricant, Lightweight Oil-10W . . . . 88, 90, 9138353 Loctite® ViperLube® High Perf. Synthetic Lubricant, Lightweight Oil-10W . . . . 88, 90, 9138402 Loctite® 7649™ Primer N™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 49, 96, 9738535 Loctite® 5905™ Flange Sealant, RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 3738584 Loctite® C5-A® Copper Based Anti-Seize Lubricant. . . . . . . . . . . . . . . . . . . . . . 64, 66, 6738588 Loctite® U-09LV™ Hysol® Urethane Adhesive, Low Viscosity . . . . . . . . . . . . . . . . . 17, 2038589 Loctite® U-09LV™ Hysol® Urethane Adhesive, Low Viscosity . . . . . . . . . . . . . . . . . 17, 2038590 Loctite® U-09LV™ Hysol® Urethane Adhesive, Low Viscosity . . . . . . . . . . . . . . . . . 17, 2038591 Loctite® U-09LV™ Hysol® Urethane Adhesive, Low Viscosity . . . . . . . . . . . . . . . . . 17, 2038872 Loctite® ViperLube® High Perf. Synthetic Lubricant, Lightweight Oil-15W . . . . 88, 90, 9138873 Loctite® ViperLube® High Perf. Synthetic Lubricant, Lightweight Oil-15W . . . . 88, 90, 9138874 Loctite® ViperLube® High Perf. Synthetic Lubricant, Lightweight Oil-15W . . . . 88, 90, 9138875 Loctite® ViperLube® High Perf. Synthetic Lubricant, Lightweight Oil-20W . . . . 88, 90, 9138876 Loctite® ViperLube® High Perf. Synthetic Lubricant, Lightweight Oil-20W . . . . 88, 90, 9138877 Loctite® ViperLube® High Perf. Synthetic Lubricant, Lightweight Oil-20W . . . . 88, 90, 9138878 Loctite® ViperLube® High Performance Synthetic Lubricant, Gear Oil-140W . . 88, 90, 9138879 Loctite® ViperLube® High Performance Synthetic Lubricant, Gear Oil-140W . . 88, 90, 9138880 Loctite® ViperLube® High Performance Synthetic Lubricant, Gear Oil-140W . . 88, 90, 9138956 Loctite® Toolbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104, 10539036 Loctite® 55™ Pipe Sealing Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9939062 Loctite® Reliability Tackle box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104, 10539088 Loctite® Fixmaster® Fast Cure Epoxy, Mixer Cups. . . . . . . . . . . . . . . . . . . . . . . . . . 78, 8039136 Loctite® Fixmaster® Marine Chocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 8339146 Loctite® ViperLube® High Performance Synthetic Grease . . . . . . . . . . . . . . . . . 88, 90, 9139147 Loctite® QuickStix™ 668™ Retaining Compound, High Temperature . . . . . . . . . . . 94, 95
39148 Loctite® QuickStix™ 668™ Retaining Compound, High Temperature . . . . . . . . . . . 94, 9539149 Loctite® QuickStix™ 668™ Retaining Compound, High Temperature . . . . . . . . . . . 94, 9539151 Loctite® QuickStix™ 548™ Gasket Eliminator® . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 8639152 Loctite® QuickStix™ 548™ Gasket Eliminator® . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 8639153 Loctite® QuickStix™ 548™ Gasket Eliminator® . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 8639155 Loctite® QuickStix™ 534™ Hi-Tack Gasket Dressing. . . . . . . . . . . . . . . . . . . . . . . . 86, 8739156 Loctite® QuickStix™ 534™ Hi-Tack Gasket Dressing. . . . . . . . . . . . . . . . . . . . . . . . 86, 8739157 Loctite® QuickStix™ 534™ Hi-Tack Gasket Dressing. . . . . . . . . . . . . . . . . . . . . . . . 86, 8739170 Loctite® 4503™ Prism® Instant Adhesive, Fast Curing/Surface Insensitive Gel . . . 13, 1539186 Loctite® 220™ Threadlocker, Wicking Grade/Low Strength . . . . . . . . . . . . . . . 52, 96, 9739202 Loctite® Quicktite® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 6339213 Loctite® 4503™ Prism® Instant Adhesive, Fast Curing/Surface Insensitive Gel . . . 13, 1539214 Loctite® 4503™ Prism® Instant Adhesive, Fast Curing/Surface Insensitive Gel . . . 13, 1539222 Loctite® QuickStix™ C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . 64, 66, 6739223 Loctite® QuickStix™ Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6739231 Loctite® 4502™ Prism® Instant Adhesive, Fast Curing/Surface Insensitive Gel . . . 13, 1539232 Loctite® 4502™ Prism® Instant Adhesive, Fast Curing/Surface Insensitive Gel . . . 13, 1539233 Loctite® 4502™ Prism® Instant Adhesive, Fast Curing/Surface Insensitive Gel . . . 13, 1539250 Loctite® 392™ Structural Adhesive, Fast Fixture/Magnet Bonder . . . . . . . . . . . . . . . 8, 1039275 Loctite® 392™ Structural Adhesive, Fast Fixture/Magnet Bonder . . . . . . . . . . . . . . . 8, 1039280 Loctite® 392™ Structural Adhesive, Fast Fixture/Magnet Bonder . . . . . . . . . . . . . . . 8, 1039341 Loctite® ViperLube® Clear High Performance Synthetic Grease . . . . . . . . . . . . 88, 90, 9139342 Loctite® ViperLube® Clear High Performance Synthetic Grease . . . . . . . . . . . . 88, 90, 9139363 Loctite® ViperLube® Clear High Performance Synthetic Grease . . . . . . . . . . . . 88, 90, 9139364 Loctite® ViperLube® Clear High Performance Synthetic Grease . . . . . . . . . . . . 88, 90, 9139366 Loctite® Fixmaster® Concrete Repair Epoxy . . . . . . . . . . . . . . . . . . . . . . . . 78, 80, 82, 8339395 Loctite® 3165™ Hysol® Epoxy Hardener, Low Shrinkage . . . . . . . . . . . . . . 40, 42, 43, 4439397 Loctite® 3184™ Hysol® Polyurethane Hardener, Flame Retardant. . . . . . . . . . . 40, 41, 4439398 Loctite® 3184™ Hysol® Polyurethane Hardener, Flame Retardant. . . . . . . . . . . 40, 41, 4439401 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339404 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339406 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix. . . . . . . . . . . . . . . . . . . . . . . . 92, 9339413 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339418 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix. . . . . . . . . . . . . . . . . . . . . . . . 92, 9339426 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339428 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339431 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix. . . . . . . . . . . . . . . . . . . . . . . . 92, 9339439 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339441 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339444 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix. . . . . . . . . . . . . . . . . . . . . . . . 92, 9339452 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339455 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339457 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix. . . . . . . . . . . . . . . . . . . . . . . . 92, 9339458 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix. . . . . . . . . . . . . . . . . . . . . . . . 92, 9339463 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339465 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339466 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339468 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix. . . . . . . . . . . . . . . . . . . . . . . . 92, 9339473 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339476 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339478 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix. . . . . . . . . . . . . . . . . . . . . . . . 92, 9339479 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix. . . . . . . . . . . . . . . . . . . . . . . . 92, 9339483 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339486 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339488 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix. . . . . . . . . . . . . . . . . . . . . . . . 92, 9339499 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339504 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix. . . . . . . . . . . . . . . . . . . . . . . . 92, 9339510 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339512 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339515 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix. . . . . . . . . . . . . . . . . . . . . . . . 92, 9339523 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339528 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix. . . . . . . . . . . . . . . . . . . . . . . . 92, 9339536 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339541 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix. . . . . . . . . . . . . . . . . . . . . . . . 92, 9339542 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix. . . . . . . . . . . . . . . . . . . . . . . . 92, 9339549 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339551 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339554 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix. . . . . . . . . . . . . . . . . . . . . . . . 92, 93
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
BY
PR
OD
UC
T &
ITE
M N
UM
BE
RIN
DE
X
141NOTE: Can’t find a Loctite® product/item number? Contact Customer Service for assistance at: 1-800-243-4874.
39561 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339566 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix. . . . . . . . . . . . . . . . . . . . . . . . 92, 9339574 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339579 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix. . . . . . . . . . . . . . . . . . . . . . . . 92, 9339587 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339589 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339590 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339592 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix. . . . . . . . . . . . . . . . . . . . . . . . 92, 9339598 Loctite® Clover® Duplex Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9339633 Loctite® Fixmaster® Rapid Rubber Repair Static Mixers . . . . . . . . . . . . . . . . . . . . . . . . 7139635 Loctite® Fixmaster® Rapid Rubber Repair Dispenser . . . . . . . . . . . . . . . . . . . . . . 71, 10639636 Loctite® Fixmaster® Flex™ Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7039637 Loctite® Fixmaster® Fast Set Grout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 8339643 Loctite® C5-A® Copper Based Anti-Seize Lubricant. . . . . . . . . . . . . . . . . . . . . . 64, 66, 6739647 Loctite® C5-A® Copper Based Anti-Seize Lubricant. . . . . . . . . . . . . . . . . . . . . . 64, 66, 6739893 Loctite® C-200® High Temperature Solid Film Lubricant . . . . . . . . . . . . . . . . . . . . . 89, 9139894 Loctite® C-200® High Temperature Solid Film Lubricant . . . . . . . . . . . . . . . . . . . . . 89, 9139895 Loctite® Moly Dry Film Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 9139896 Loctite® Moly Dry Film Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 9139897 Loctite® Moly Dry Film Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 9139901 Loctite® Zinc Anti-Seize. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6739904 Loctite® Thread Sealing Tape with PTFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9939915 Loctite® Big Foot™ Zero V.O.C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 6939916 Loctite® Urethane Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104, 10539917 Loctite® Fixmaster® Fast Set Steel Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79, 8139918 Loctite® Nordbak® High Impact Wearing Compound . . . . . . . . . . . . . . . . . 100, 102, 10339944 Loctite® 3140™ Hysol® Epoxy Resin, General Purpose. . . . . . . . . . . . . . . . . . . 40, 42, 4439945 Loctite® 3140™ Hysol® Epoxy Resin, General Purpose. . . . . . . . . . . . . . . . . . . 40, 42, 4439947 Loctite® 3141™ Hysol® Epoxy Resin, High Temperature. . . . . . . . . . . . . . . . . . 40, 42, 4439948 Loctite® 3141™ Hysol® Epoxy Resin, High Temperature. . . . . . . . . . . . . . . . . . 40, 42, 4439950 Loctite® 3142™ Hysol® Epoxy Resin, Thermally Conductive. . . . . . . . . . . . . . . 40, 43, 4439951 Loctite® 3142™ Hysol® Epoxy Resin, Thermally Conductive. . . . . . . . . . . . . . . 40, 43, 4439952 Loctite® 3142™ Hysol® Epoxy Resin, Thermally Conductive. . . . . . . . . . . . . . . 40, 43, 4439953 Loctite® 3144™ Hysol® Epoxy Resin, Flame Retardant . . . . . . . . . . . . . . . . . . . 40, 43, 4439954 Loctite® 3144™ Hysol® Epoxy Resin, Flame Retardant . . . . . . . . . . . . . . . . . . . 40, 43, 4439956 Loctite® 3160™ Hysol® Epoxy Hardener, Glossy Surface Finish . . . . . . . . . 40, 42, 43, 4439958 Loctite® 3160™ Hysol® Epoxy Hardener, Glossy Surface Finish . . . . . . . . . 40, 42, 43, 4439960 Loctite® 3162™ Hysol® Epoxy Hardener, Fast Cure. . . . . . . . . . . . . . . . . . . 40, 42, 43, 4439961 Loctite® 3162™ Hysol® Epoxy Hardener, Fast Cure. . . . . . . . . . . . . . . . . . . 40, 42, 43, 4439962 Loctite® 3162™ Hysol® Epoxy Hardener, Fast Cure. . . . . . . . . . . . . . . . . . . 40, 42, 43, 4439964 Loctite® 3163™ Hysol® Epoxy Hardener, Excellent Adhesion . . . . . . . . . . . 40, 42, 43, 4439965 Loctite® 3163™ Hysol® Epoxy Hardener, Excellent Adhesion . . . . . . . . . . . 40, 42, 43, 4439966 Loctite® 3163™ Hysol® Epoxy Hardener, Excellent Adhesion . . . . . . . . . . . 40, 42, 43, 4439969 Loctite® 3164™ Hysol® Epoxy Hardener, General Purpose . . . . . . . . . . . . . 40, 42, 43, 4439970 Loctite® 3164™ Hysol® Epoxy Hardener, General Purpose . . . . . . . . . . . . . 40, 42, 43, 4439973 Loctite® 3165™ Hysol® Epoxy Hardener, Low Shrinkage . . . . . . . . . . . . . . 40, 42, 43, 4439980 Loctite® 3172™ Hysol® Polyurethane Resin, Flame Retardant (Low Tg) . . . . . 40, 41, 4439982 Loctite® 3172™ Hysol® Polyurethane Resin, Flame Retardant (Low Tg) . . . . . 40, 41, 4439984 Loctite® 3173™ Hysol® Polyurethane Resin, General Purpose . . . . . . . . . . . . . 40, 41, 4439985 Loctite® 3173™ Hysol® Polyurethane Resin, General Purpose . . . . . . . . . . . . . 40, 41, 4439986 Loctite® 3173™ Hysol® Polyurethane Resin, General Purpose . . . . . . . . . . . . . 40, 41, 4439992 Loctite® 3181™ Hysol® Polyurethane Hardener, Flame Retardant/Low Temp. . 40, 41, 4439993 Loctite® 3181™ Hysol® Polyurethane Hardener, Flame Retardant/Low Temp. . 40, 41, 4439995 Loctite® 3182™ Hysol® Polyurethane Hardener, Fast Cure . . . . . . . . . . . . . . . . 40, 41, 4439996 Loctite® 3182™ Hysol® Polyurethane Hardener, Fast Cure . . . . . . . . . . . . . . . . 40, 41, 4439997 Loctite® 3182™ Hysol® Polyurethane Hardener, Fast Cure . . . . . . . . . . . . . . . . 40, 41, 4439998 Loctite® 3183™ Hysol® Polyurethane Hardener, General Purpose . . . . . . . . . . 40, 41, 4439999 Loctite® 3183™ Hysol® Polyurethane Hardener, General Purpose . . . . . . . . . . 40, 41, 4440086 Loctite® 5031™ Nuva-Sil® Silicone Potting Compound. . . . . . . . . . . . . . . . . . . 29, 31, 4540087 Loctite® 5031™ Nuva-Sil® Silicone Potting Compound. . . . . . . . . . . . . . . . . . . 29, 31, 4540088 Loctite® 5033™ Nuva-Sil® Silicone Potting Compound. . . . . . . . . . . . . . . . . . . . . . . . . 3140089 Loctite® 5033™ Nuva-Sil® Silicone Potting Compound. . . . . . . . . . . . . . . . . . . . . . . . . 3140104 Loctite® 401™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . 12, 1440140 Loctite® 401™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . 12, 1440161 Loctite® 401™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . 12, 1440304 Loctite® 403™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . 12, 1440340 Loctite® 403™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . 12, 1440361 Loctite® 403™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . 12, 14
40604 Loctite® 406™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . . . . 1440640 Loctite® 406™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . . . . 1440661 Loctite® 406™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . . . . 1440840 Loctite® 408™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . 1440861 Loctite® 408™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . 1440904 Loctite® 409™ Super Bonder® Instant Adhesive Gel, Industrial Grade . . . . . . . . . . . . . 1440945 Loctite® 409™ Super Bonder® Instant Adhesive Gel, Industrial Grade . . . . . . . . . . . . . 1440974 Loctite® 409™ Super Bonder® Instant Adhesive Gel, Industrial Grade . . . . . . . . . . . . . 1441004 Loctite® 410™ Prism® Instant Adhesive, Black/Toughened . . . . . . . . . . . . . . . . . . . . . 1441045 Loctite® 410™ Prism® Instant Adhesive, Black/Toughened . . . . . . . . . . . . . . . . . . . . . 1441061 Loctite® 410™ Prism® Instant Adhesive, Black/Toughened . . . . . . . . . . . . . . . . . . . . . 1441104 Loctite® 411™ Prism® Instant Adhesive, Clear Toughened . . . . . . . . . . . . . . . . . . . 12, 1441145 Loctite® 411™ Prism® Instant Adhesive, Clear Toughened . . . . . . . . . . . . . . . . . . . 12, 1441161 Loctite® 411™ Prism® Instant Adhesive, Clear Toughened . . . . . . . . . . . . . . . . . . . 12, 1441404 Loctite® 414™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1441450 Loctite® 414™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1441461 Loctite® 414™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1441550 Loctite® 415™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1441561 Loctite® 415™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1441650 Loctite® 416™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1441661 Loctite® 416™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1442050 Loctite® 420™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1442061 Loctite® 420™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1442250 Loctite® 422™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1442261 Loctite® 422™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1442540 Loctite® 425™ Assure™ Instant Adhesive, Surface Curing Threadlocker . . . . . . . . 51, 5242561 Loctite® 425™ Assure™ Instant Adhesive, Surface Curing Threadlocker . . . . . . . . 51, 5243004 Loctite® 430™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 1443050 Loctite® 430™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 1443061 Loctite® 430™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 1444704 Loctite® 4471™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . . . 1544740 Loctite® 4471™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . . . 1544761 Loctite® 4471™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . . . 1545404 Loctite® 454™ Prism® Instant Adhesive, Surface Insensitive Gel . . . . . . . . . . . . . . . . . 1445440 Loctite® 454™ Prism® Instant Adhesive, Surface Insensitive Gel . . . . . . . . . . . . . . . . . 1445474 Loctite® 454™ Prism® Instant Adhesive, Surface Insensitive Gel . . . . . . . . . . . . . . . . . 1445478 Loctite® 454™ Prism® Instant Adhesive, Surface Insensitive Gel . . . . . . . . . . . . . . . . . 1446004 Loctite® 460™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . 1546040 Loctite® 460™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . 1546061 Loctite® 460™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . 1546548 Loctite® 404™ Quick Set™ Instant Adhesive, General Purpose . . . . . . . . . 12, 14, 62, 6346551 Loctite® 404™ Quick Set™ Instant Adhesive, General Purpose . . . . . . . . . 12, 14, 62, 6346561 Loctite® 404™ Quick Set™ Instant Adhesive, General Purpose . . . . . . . . . . . . . . . 12, 1448040 Loctite® 480™ Prism® Instant Adhesive, Black/Toughened . . . . . . . . . . . . . . . . . . . . . . 1548061 Loctite® 480™ Prism® Instant Adhesive, Black/Toughened . . . . . . . . . . . . . . . . . . . . . . 1549350 Loctite® 493™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1549361 Loctite® 493™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1549504 Loctite® 495™ Super Bonder® Instant Adhesive, General Purpose . . . . . . . . . . . . . 12, 1549550 Loctite® 495™ Super Bonder® Instant Adhesive, General Purpose . . . . . . . . . . . . . 12, 1549561 Loctite® 495™ Super Bonder® Instant Adhesive, General Purpose . . . . . . . . . . . . . 12, 1549595 Loctite® 495™ Super Bonder® Instant Adhesive, General Purpose . . . . . . . . . . . . . 12, 1549650 Loctite® 496™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1549661 Loctite® 496™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1549850 Loctite® 498™ Super Bonder® Instant Adhesive, Thermal Cycling Resistant . . . . . 13, 1549861 Loctite® 498™ Super Bonder® Instant Adhesive, Thermal Cycling Resistant . . . . . 13, 1549904 Loctite® 499™ Super Bonder® Instant Adhesive, Thermal Cycling Resistant Gel . . . . . 1549945 Loctite® 499™ Super Bonder® Instant Adhesive, Thermal Cycling Resistant Gel . . . . . 1549974 Loctite® 499™ Super Bonder® Instant Adhesive, Thermal Cycling Resistant Gel . . . . . 1550441 Loctite® 504™ Gasket Eliminator® Flange Sealant, Large Gaps. . . . . . . . . . . . . . . . 34, 3550480 Loctite® 504™ Gasket Eliminator® Flange Sealant, Large Gaps. . . . . . . . . . . . . . . . 34, 3550965 Loctite® 509™ Gasket Eliminator® Flange Sealant, Flexible . . . . . . . . . . . . . . . . . . . 34, 3551001 Loctite® C5-A® Copper Based Anti-Seize Lubricant. . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751002 Loctite® C5-A® Copper Based Anti-Seize Lubricant. . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751003 Loctite® C5-A® Copper Based Anti-Seize Lubricant. . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751004 Loctite® C5-A® Copper Based Anti-Seize Lubricant. . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751005 Loctite® C5-A® Copper Based Anti-Seize Lubricant. . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751006 Loctite® C5-A® Copper Based Anti-Seize Lubricant. . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751007 Loctite® C5-A® Copper Based Anti-Seize Lubricant. . . . . . . . . . . . . . . . . . . . . . 64, 66, 67
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
BY
PR
OD
UC
T &
IT
EM
NU
MB
ER
IND
EX
142 NOTE: Can’t find a Loctite® product/item number? Contact Customer Service for assistance at: 1-800-243-4874.
51008 Loctite® C5-A® Copper Based Anti-Seize Lubricant. . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751009 Loctite® C5-A® Copper Based Anti-Seize Lubricant. . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751011 Loctite® C5-A® Copper Based Anti-Seize Lubricant. . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751031 Loctite® 510™ Gasket Eliminator® Flange Sealant, High Temperature . . . . 34, 35, 84, 8651041 Loctite® 510™ Gasket Eliminator® Flange Sealant, High Temperature. . . . . . . . . . . 34, 3551048 Loctite® Moly Paste. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751049 Loctite® Moly Paste. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751050 Loctite® Moly Paste. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751074 Loctite® 510™ Gasket Eliminator® Flange Sealant, High Temperature. . . . . . . . . . . 34, 3551084 Loctite® Graphite-50™ Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6751094 Loctite® Moly-50™ Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6751102 Loctite® Nickel Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751115 Loctite® N-1000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6751116 Loctite® N-1000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6751117 Loctite® N-1000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6751144 Loctite® C5-A® Copper Based Anti-Seize Lubricant. . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751145 Loctite® Moly Paste. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751146 Loctite® C5-A® Copper Based Anti-Seize Lubricant. . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751147 Loctite® C5-A® Copper Based Anti-Seize Lubricant. . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751152 Loctite® Nickel Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751168 Loctite® Food Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6751170 Loctite® Food Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6751171 Loctite® Food Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6751211 Loctite® Maxi-Coat™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 7751213 Loctite® Maxi-Coat™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 7751221 Loctite® Penetrating Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 9151242 Loctite® Extreme Pressure Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 9151243 Loctite® N-5000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6751245 Loctite® N-5000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6751246 Loctite® N-5000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6751252 Loctite® Food Grade Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 9151269 Loctite® N-5000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6751270 Loctite® N-7000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6751272 Loctite® N-7000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6751273 Loctite® N-7000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6751277 Loctite® C5-A® Copper Based Anti-Seize Lubricant. . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751286 Loctite® Nickel Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751299 Loctite® C5-A® Copper Based Anti-Seize Lubricant. . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751346 Loctite® N-5000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66, 6751360 Loctite® Silicone Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 9151387 Loctite® Superflex® Non-Corrosive RTV, Clear Silicone Adhesive Sealant. . . . . . . . 85, 8751388 Loctite® Superflex® Non-Corrosive RTV, Clear Silicone Adhesive Sealant. . . . . . . . 85, 8751517 Loctite® 515™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3551531 Loctite® 515™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3551572 Loctite® High Performance N-5000™ High Purity Anti-Seize . . . . . . . . . . . . . . 65, 66, 6751580 Loctite® 515™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3551604 Loctite® Pro Lock™ Tight®, Multipurpose Anaerobic Gel . . . . . . . . . . . . . . . . . . 104, 10551605 Loctite® Heavy Duty Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751606 Loctite® Heavy Duty Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751607 Loctite® Heavy Duty Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751608 Loctite® Heavy Duty Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751609 Loctite® Heavy Duty Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6751642 Loctite® Pro Lock™ Tight®, Multipurpose Anaerobic Gel . . . . . . . . . . . . . . . . . . 104, 10551817 Loctite® 518™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . 34, 35, 84, 8651831 Loctite® 518™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . 34, 35, 84, 8651845 Loctite® 518™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3554505 Loctite® 545™ Thread Sealant, Hydraulic/Pneumatic Fittings . . . . . . . . . . . . . . . . . 54, 5654531 Loctite® 545™ Thread Sealant, Hydraulic/Pneumatic Fittings . . . . . . . . . . . 54, 56, 98, 9954541 Loctite® 545™ Thread Sealant, Hydraulic/Pneumatic Fittings . . . . . . . . . . . 54, 56, 98, 9954941 Loctite® 549™ Instant Seal Plastic Gasket Thread Sealant . . . . . . . . . . . . . . . . . . . . . . 3555441 Loctite® 554™ Thread Sealant, Refrigerant Sealant . . . . . . . . . . . . . . . . . . . . . . . . 54, 5656507 Loctite® 565™ PST® Thread Sealant, Controlled Strength . . . . . . . . . . . . . 54, 56, 98, 9956531 Loctite® 565™ PST® Thread Sealant, Controlled Strength . . . . . . . . . . . . . 54, 56, 98, 9956541 Loctite® 565™ PST® Thread Sealant, Controlled Strength . . . . . . . . . . . . . 54, 56, 98, 9956543 Loctite® 565™ PST® Thread Sealant, Controlled Strength. . . . . . . . . . . . . . . . . . . . 54, 5656566 Loctite® 565™ PST® Thread Sealant, Controlled Strength. . . . . . . . . . . . . . . . . . . . 54, 5656571 Loctite® 565™ PST® Thread Sealant, Controlled Strength . . . . . . . . . . . . . 54, 56, 98, 9956707 Loctite® 567™ PST® Thread Sealant, High Temperature . . . . . . . . . . . . . . . 55, 56, 98, 99
56747 Loctite® 567™ PST® Thread Sealant, High Temperature . . . . . . . . . . . . . . . 55, 56, 98, 9956765 Loctite® 567™ PST® Thread Sealant, High Temperature . . . . . . . . . . . . . . . 55, 56, 98, 9956790 Loctite® 567™ PST® Thread Sealant, High Temperature . . . . . . . . . . . . . . . . . . . . . 55, 5656841 Loctite® 568™ Flange Sealant, Plastic Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3556931 Loctite® 569™ Thread Sealant, Hydraulic Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5656941 Loctite® 569™ Thread Sealant, Hydraulic Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5656943 Loctite® 569™ Thread Sealant, Hydraulic Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5657141 Loctite® 571™ Thread Sealant, Pipe Sealant HVV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5657941 Loctite® 579™ Thread Sealant, Instant Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 5658031 Loctite® 580™ PST® Thread Sealant, Low Halogen/Low Sulfur . . . . . . . . . . . . . . . 55, 5658730 Loctite® 587™ Blue, High Performance RTV Silicone Gasket Maker. . . . . . . . . . . . 85, 8758775 Loctite® 587™ Blue, High Performance RTV Silicone Gasket Maker. . . . . . . . . . . . 85, 8758791 Loctite® 587™ Blue, High Performance RTV Silicone Gasket Maker. . . . . . . . . . . . 85, 8759214 Loctite® 592™ PST® Thread Sealant, Slow Cure . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 5659231 Loctite® 592™ PST® Thread Sealant, Slow Cure . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 5659241 Loctite® 592™ PST® Thread Sealant, Slow Cure . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 5659243 Loctite® 592™ PST® Thread Sealant, Slow Cure . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 5659330 Loctite® Superflex® RTV, Black Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . 85, 8759375 Loctite® Superflex® RTV, Black Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . 85, 8759430 Loctite® Superflex® RTV, White Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . 85, 8759475 Loctite® Superflex® RTV, White Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . 85, 8759530 Loctite® Superflex® RTV, Clear Silicone Adhesive Sealant. . . . . . . . . . . . . . . . . . . . 85, 8759575 Loctite® Superflex® RTV, Clear Silicone Adhesive Sealant. . . . . . . . . . . . . . . . . . . . 85, 8759630 Loctite® Superflex® Red High Temp RTV, Silicone Adhesive Sealant . . . . . . . . . . . 85, 8759675 Loctite® Superflex® Red High Temp RTV, Silicone Adhesive Sealant . . . . . . . . . . . 85, 8759830 Loctite® 598™ Black, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . 85, 8759866 Loctite® 598™ Black, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . 85, 8759875 Loctite® 598™ Black, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . 85, 8759891 Loctite® 598™ Black, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . 85, 8760905 Loctite® 609™ Retaining Compound, Press Fit/General Purpose . . . . . . . . . . . . . . 46, 4760921 Loctite® 609™ Retaining Compound, Press Fit/General Purpose . . . . . . . . 46, 47, 94, 9560931 Loctite® 609™ Retaining Compound, Press Fit/General Purpose . . . . . . . . 46, 47, 94, 9560941 Loctite® 609™ Retaining Compound, Press Fit/General Purpose . . . . . . . . 46, 47, 94, 9560943 Loctite® 609™ Retaining Compound, Press Fit/General Purpose . . . . . . . . . . . . . . 46, 4762005 Loctite® 620™ Retaining Compound, Slip Fit/High Temperature. . . . . . . . . . . . . . . 46, 4762015 Loctite® 620™ Retaining Compound, Slip Fit/High Temperature . . . . . . . . 46, 47, 94, 9562040 Loctite® 620™ Retaining Compound, Slip Fit/High Temperature . . . . . . . . 46, 47, 94, 9562070 Loctite® 620™ Retaining Compound, Slip Fit/High Temperature . . . . . . . . 46, 47, 94, 9562085 Loctite® 620™ Retaining Compound, Slip Fit/High Temperature. . . . . . . . . . . . . . . 46, 4763531 Loctite® 635™ Retaining Compound, Slip Fit/High Strength/Slow Cure . . . . . . . . . 46, 4763541 Loctite® 635™ Retaining Compound, Slip Fit/High Strength/Slow Cure . . . . . . . . . 46, 4764031 Loctite® 640™ Retaining Compound, Press Fit/Medium Strength/High Temp. . . . . 46, 4764041 Loctite® 640™ Retaining Compound, Press Fit/Medium Strength/High Temp. . . . . 46, 4766010 Loctite® 660™ Quick Metal® Retaining Compound, Press Fit Repair . . . . . . . . 47, 94, 9566040 Loctite® 660™ Quick Metal® Retaining Compound, Press Fit Repair . . . . . . . . 47, 94, 9566141 Loctite® 661™ Retaining Compound, Slip Fit/UV Cure . . . . . . . . . . . . . . . . . . . . . . 23, 4767541 Loctite® 675™ Retaining Compound, Press Fit/Medium Strength . . . . . . . . . . . . . . . . 4768005 Loctite® 680™ Retaining Compound, Slip Fit/High Strength. . . . . . . . . . . . . . . . . . . . . 4768015 Loctite® 680™ Retaining Compound, Slip Fit/High Strength. . . . . . . . . . . . . . . . . . 47, 9568035 Loctite® 680™ Retaining Compound, Slip Fit/High Strength. . . . . . . . . . . . . . . . . . 47, 9568060 Loctite® 680™ Retaining Compound, Slip Fit/High Strength. . . . . . . . . . . . . . . . . . 47, 9568090 Loctite® 680™ Retaining Compound, Slip Fit/High Strength. . . . . . . . . . . . . . . . . . . . . 4774126 Loctite® Waterproofing Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10575326 Loctite® Clean-Up Solvent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10575430 Loctite® Extend® Rust Treatment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 7775448 Loctite® Extend® Rust Treatment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 7775465 Loctite® Extend® Rust Treatment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 7776732 Loctite® Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6776759 Loctite® Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6776764 Loctite® Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6776775 Loctite® Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6777124 Loctite® Nickel Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6777164 Loctite® Nickel Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6777175 Loctite® Nickel Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6779040 Loctite® Chisel® Gasket Remover (Methylene Chloride) . . . . . . . . . . . . . . . . . . 73, 74, 7580032 Loctite® Penetrating Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 9180206 Loctite® Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 6780209 Loctite® Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 66, 67
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
BY
PR
OD
UC
T &
ITE
M N
UM
BE
RIN
DE
X
143NOTE: Can’t find a Loctite® product/item number? Contact Customer Service for assistance at: 1-800-243-4874.
80724 Loctite® No More Leaks™, Plastic Pipe Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9980725 Loctite® No More Leaks™, Plastic Pipe Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9980726 Loctite® No More Leaks™, Plastic Pipe Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9980964 Loctite® Gasket Sealant 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 8781120 Loctite® Fixmaster® Poxy Pak™, Fast Cure Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . 78, 8081204 Loctite® Maintain® Lubricant Penetrant, Moisture Displacer & Rust Preventer. . . . 89, 9181246 Loctite® Silicone Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 9181251 Loctite® Gear, Chain and Cable Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 9181252 Loctite® Solvo-Rust® Super Penetrating Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 9181716 Loctite® Industrial Strength Paint Stripper . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73, 74, 7582039 Loctite® Cold Galvanizing Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 7782046 Loctite® 5920™ Copper, High Performance RTV Silicone Gasket Maker . . 36, 37, 85, 8782093 Loctite® Fixmaster® Underwater Repair Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78, 8082244 Loctite® Natural Blue® Biodegradable Cleaner & Degreaser . . . . . . . . . . . . . . . 72, 74, 7582249 Loctite® Natural Blue® Biodegradable Cleaner & Degreaser . . . . . . . . . . . . . . . 72, 74, 7582251 Loctite® Natural Blue® Biodegradable Cleaner & Degreaser . . . . . . . . . . . . . . . 72, 74, 7582253 Loctite® Natural Blue® Biodegradable Cleaner & Degreaser . . . . . . . . . . . . . . . 72, 74, 7582254 Loctite® Natural Blue® Biodegradable Cleaner & Degreaser . . . . . . . . . . . . . . . 72, 74, 7582255 Loctite® Natural Blue® Biodegradable Cleaner & Degreaser . . . . . . . . . . . . . . . 72, 74, 7582279 Loctite® Superflex® Red High Temp RTV, Silicone Adhesive Sealant . . . . . . . . . . . 85, 8782480 Loctite® H.V.A.C. Blue Pipe Joint Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9982481 Loctite® H.V.A.C. Blue Pipe Joint Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9982518 Loctite® Superflex® RTV, White Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . 85, 8783000 Loctite® H3000™ Speedbonder™ Structural Adhesive, General Purpose. . . . . . . . . 9, 1183001 Loctite® H3000™ Speedbonder™ Structural Adhesive, General Purpose. . . . . . . . . 9, 1183006 Loctite® H3101™ Speedbonder™ Structural Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . 1183007 Loctite® H3101™ Speedbonder™ Structural Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . 1183014 Loctite® H3151™ Speedbonder™ Structural Adhesive, Metal Bonder . . . . . . . . . . . 9, 1183015 Loctite® H3151™ Speedbonder™ Structural Adhesive, Metal Bonder . . . . . . . . . . . 9, 1183019 Loctite® H3300™ Speedbonder™ Structural Adh., General Purpose/Fast Fixture . . . 9, 1183020 Loctite® H3300™ Speedbonder™ Structural Adh., General Purpose/Fast Fixture . . . 9, 1183022 Loctite® H3300™ Speedbonder™ Structural Adh., General Purpose/Fast Fixture . . . 9, 1183024 Loctite® H3300™ Speedbonder™ Structural Adh., General Purpose/Fast Fixture . . . 9, 1183025 Loctite® H4000™ Speedbonder™ Structural Adhesive, Non-Sag . . . . . . . . . . . . . . . 9, 1183028 Loctite® H4000™ Speedbonder™ Structural Adhesive, Non-Sag . . . . . . . . . . . . . . . 9, 1183031 Loctite® H4000™ Speedbonder™ Structural Adhesive, Non-Sag . . . . . . . . . . . . . . . 9, 1183032 Loctite® H4100™ Speedbonder™ Structural Adhesive, Ultra Fast. . . . . . . . . . . . . . . 9, 1183038 Loctite® H4200™ Speedbonder™ Structural Adhesive, Toughened. . . . . . . . . . . . . . 9, 1183041 Loctite® H4500™ Speedbonder™ Structural Adhesive, Metal Bonder. . . . . . . . . . . . 9, 1183045 Loctite® H4800™ Speedbonder™ Structural Adhesive, Toughened. . . . . . . . . . . . . . 9, 1183046 Loctite® H4800™ Speedbonder™ Structural Adhesive, Toughened. . . . . . . . . . . . . . 9, 1183047 Loctite® H4800™ Speedbonder™ Structural Adhesive, Toughened. . . . . . . . . . . . . . 9, 1183069 Loctite® 0151™ Hysol® Epoxy Adhesive, Ultra Clear . . . . . . . . . . . . . . . . . . . . . . . 17, 1883075 Loctite® 608™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . . . . 17, 1883082 Loctite® 608™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . . . . 17, 1883083 Loctite® 608™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . . . . 17, 1883086 Loctite® 608™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . . . . 17, 1883089 Loctite® D609™ Hysol® Epoxy Adhesive, Ultra Clear. . . . . . . . . . . . . . . . . . . . . . . . 17, 1883094 Loctite® 615™ Hysol® Epoxy Adhesive, Sandable . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 1883095 Loctite® 615™ Hysol® Epoxy Adhesive, Sandable . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 1883098 Loctite® 907™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1883107 Loctite® 9412™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1983108 Loctite® 9412™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1983113 Loctite® 9430™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . . . 17, 1883114 Loctite® 9430™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . . . 17, 1883119 Loctite® 9433™ Hysol® Epoxy Adhesive, Self-Leveling . . . . . . . . . . . . . . . . . . . . . . 17, 1883126 Loctite® 9459™ Hysol® Epoxy Adhesive, High Temperature Resistance . . . . . . . . 17, 1983128 Loctite® 9460™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . 17, 1983129 Loctite® 9460™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . 17, 1983130 Loctite® 9460™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . 17, 1983131 Loctite® 9460™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . 17, 1983133 Loctite® 9460™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . 17, 1983134 Loctite® 9460™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . 17, 1983135 Loctite® 9462™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1983142 Loctite® 9462™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1983149 Loctite® 9739™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1983150 Loctite® 9739™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1983176 Loctite® 0151™ Hysol® Epoxy Adhesive, Ultra Clear . . . . . . . . . . . . . . . . . . . . 17, 18, 23
83178 Loctite® 0151™ Hysol® Epoxy Adhesive, Ultra Clear . . . . . . . . . . . . . . . . . . . . . . . 17, 1883179 Loctite® 0151™ Hysol® Epoxy Adhesive, Ultra Clear . . . . . . . . . . . . . . . . . . . . . . . 17, 1883186 Loctite® 11C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1883200 Loctite® 1C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1883201 Loctite® 1C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1883202 Loctite® 1C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1883207 Loctite® 1C-LV™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1883208 Loctite® 1C-LV™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1883211 Loctite® 6C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1883216 Loctite® 9432NA™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . 17, 1983217 Loctite® 9432NA™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . 17, 1983224 Loctite® 9460F™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1883225 Loctite® 9460F™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1883232 Loctite® 9460PB™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1983233 Loctite® 9460PB™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1983237 Loctite® 232™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . 25, 2783239 Loctite® 232™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . 25, 2783241 Loctite® 232™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . 25, 2783244 Loctite® 232™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . 25, 2783245 Loctite® 232™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . 25, 2783246 Loctite® 232™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . 25, 2783247 Loctite® 232™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . 25, 2783251 Loctite® 236™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . 25, 2783252 Loctite® 236™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . 25, 2783255 Loctite® 342™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . . . . 2683256 Loctite® 0437™ Hysol® SprayPac® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . 2683257 Loctite® 0452™ Hysol® SprayPac® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . 25, 2683260 Loctite® 740™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . . . . 2683261 Loctite® 740™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . . . . 2683263 Loctite® 740™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . . . . 2683264 Loctite® 740™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . . . . 2683266 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . 25, 26, 4483267 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . 25, 26, 4483268 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . 25, 26, 4483269 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . 25, 26, 4483271 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . 25, 26, 4483272 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . 25, 26, 4483273 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . 25, 26, 4483274 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . 25, 26, 4483275 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . 25, 26, 4483276 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . 25, 26, 4483277 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . 25, 26, 4483278 Loctite® 4046™ Hysol® Polyshot™ Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . 2783279 Loctite® 4046™ Hysol® Polyshot™ Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . 2783280 Loctite® 6002™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2683283 Loctite® 6002™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2683285 Loctite® 6002™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2683308 Loctite® 7460™ Hysol® SprayPac® Polyshot™ Hot Melt Adhesive, Polyamide . . . . 24, 2783312 Loctite® 7500™ Hysol® SprayPac® Polyshot™ Hot Melt Adhesive, Polyamide . . . . 24, 2783313 Loctite® 7500™ Hysol® SprayPac® Polyshot™ Hot Melt Adhesive, Polyamide . . . . 24, 2783323 Loctite® 7803™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2783325 Loctite® 7804™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2783326 Loctite® 7804™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2783327 Loctite® 7804™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2783328 Loctite® 7804™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2783329 Loctite® 7804™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2783330 Loctite® 7804™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2783337 Loctite® 7811™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . . 24, 27, 4483339 Loctite® 7811™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . . 24, 27, 4483340 Loctite® 7811™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . . . . . 24, 2783341 Loctite® 7901™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . . 24, 27, 4483342 Loctite® 7901™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . . 24, 27, 4483343 Loctite® 7901™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . . 24, 27, 4483344 Loctite® 7901™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . . 24, 27, 4483346 Loctite® 0420™ Hysol® SprayPac® Polyshot™ Hot Melt Adhesive, EVA Based . . . 25, 2683348 Loctite® 0430™ Hysol® SprayPac® Polyshot™ Hot Melt Adhesive, EVA Based . . . 25, 2683349 Loctite® 0430™ Hysol® SprayPac® Polyshot™ Hot Melt Adhesive, EVA Based . . . 25, 2683350 Loctite® 0430™ Hysol® SprayPac® Polyshot™ Hot Melt Adh., EVA Based/Red. . . . 25, 26
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
BY
PR
OD
UC
T &
IT
EM
NU
MB
ER
IND
EX
144 NOTE: Can’t find a Loctite® product/item number? Contact Customer Service for assistance at: 1-800-243-4874.
83351 Loctite® 0430™ Hysol® SprayPac® Polyshot™ Hot Melt Adh., EVA Based/Red. . . . 25, 2683352 Loctite® 0437™ Hysol® SprayPac® Polyshot™ Hot Melt Adhesive, EVA Based . . . . . . . 2683353 Loctite® 0450™ Hysol® SprayPac® Polyshot™ Hot Melt Adhesive, EVA Based . . . 25, 2683354 Loctite® 0450™ Hysol® SprayPac® Polyshot™ Hot Melt Adhesive, EVA Based . . . 25, 2683355 Loctite® 0450™ Hysol® SprayPac® Polyshot™ Hot Melt Adh., EVA Based/Red . . . 25, 2683356 Loctite® 0450™ Hysol® SprayPac® Polyshot™ Hot Melt Adh., EVA Based/Red . . . 25, 2683357 Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . 25, 2683358 Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . 25, 2683359 Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . 25, 2683360 Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . 25, 2683362 Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . 25, 2683364 Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . 25, 2683365 Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . 25, 2683367 Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . 25, 2683368 Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . 25, 2683369 Loctite® 3X™ Hysol® Polyshot™ Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . 25, 2683370 Loctite® 3X™ Hysol® Polyshot™ Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . 25, 2683373 Loctite® 0740LV™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . 2783374 Loctite® 0740LV™ Hysol® Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . . . . . 2783382 Loctite® 7804FRM-HV™ Hysol® Hot Melt Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2783383 Loctite® 7804FRM-HV™ Hysol® Hot Melt Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2783384 Loctite® 7804FRM-HV™ Hysol® Hot Melt Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2783386 Loctite® 7804FRM-HV™ Hysol® Hot Melt Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2783387 Loctite® 7804FRM-HV™ Hysol® Hot Melt Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2783388 Loctite® 7809FR™ Hysol® Hot Melt Adhesive, Polyamide. . . . . . . . . . . . . . . . . 24, 27, 4483390 Loctite® 7809FR™ Hysol® Hot Melt Adhesive, Polyamide. . . . . . . . . . . . . . . . . 24, 27, 4483391 Loctite® 7809FR™ Hysol® Hot Melt Adhesive, Polyamide. . . . . . . . . . . . . . . . . 24, 27, 4483393 Loctite® Hysol® CoolMelt™ Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . 25, 2683394 Loctite® Hysol® CoolMelt™ Hot Melt Adhesive, EVA Based. . . . . . . . . . . . . . . . . . . 25, 2683395 Loctite® Hysol® QuikPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . 25, 2683397 Loctite® Hysol® QuikPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . 25, 2683398 Loctite® Hysol® QuikPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . 25, 2683399 Loctite® Hysol® QuikPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . 25, 2683400 Loctite® Hysol® QuikPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . 25, 2683402 Loctite® Hysol® SuperPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . 25, 2683403 Loctite® Hysol® SuperPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . 25, 2683404 Loctite® Hysol® SuperPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . 25, 2683405 Loctite® Hysol® SuperPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . 25, 2683408 Loctite® Hysol® WaxPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . 25, 2683410 Loctite® Hysol® WaxPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . 25, 2694142 Loctite® Big Foot™ Water Based Primer/Sealer. . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 6995551 Loctite® Fixmaster® Magna-Crete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 8395555 Loctite® Fixmaster® Magna-Crete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 8395581 Loctite® Big Foot™ Acrylic Primer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 6995591 Loctite® Big Foot™ Acrylic Pedestrian Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 6995724 Loctite® Fixmaster® 2000° Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104, 10596092 Loctite® Nordbak® Chemical Resistant Coating . . . . . . . . . . . . . . . . . . . . . . . . . . 102, 10396102 Loctite® Fixmaster® Marine Chocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 8396121 Loctite® Phenolic Roller Cores . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6996131 Loctite® Mixer Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6996132 Loctite® Big Foot™ Metal Primer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 6996153 Loctite® Bristle Rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6996211 Loctite® Big Foot™ Heavy Duty Pedestrian Grade . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 6996221 Loctite® Big Foot™ Vehicular Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 6996251 Loctite® Big Foot™ Vehicular Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 6996255 Loctite® Big Foot™ Vehicular Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 6996261 Loctite® Big Foot™ Heavy Duty Pedestrian Grade . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 6996265 Loctite® Big Foot™ Heavy Duty Pedestrian Grade . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 6996303 Loctite® Nordbak® Combo Bead Wearing Compound . . . . . . . . . . . . . . . . . 101, 102, 10396321 Loctite® Pipe Repair Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104, 10596322 Loctite® Pipe Repair Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104, 10596332 Loctite® Nordbak® Ultra High Temperature Pneu-Wear. . . . . . . . . . . . . . . . 101, 102, 10396363 Loctite® Nordbak® Fast Cure Pneu-Wear. . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 10396373 Loctite® Nordbak® Fast Cure Wearing Compound. . . . . . . . . . . . . . . . . . . . 100, 102, 10396392 Loctite® Nordbak® Ultra High Temperature Wearing Compound. . . . . . . . . 100, 102, 10396433 Loctite® Nordbak® High Temperature Brushable Ceramic . . . . . . . . . . . . . . . . . . 102, 10396443 Loctite® Nordbak® Brushable Ceramic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 10396495 Loctite® Fixmaster® High Performance Quartz . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 83
96583 Loctite® Fixmaster® Wet Surface Repair Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79, 8196604 Loctite® Fixmaster® Fast Set Steel Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79, 8196675 Loctite® Fixmaster® Rapid Rubber Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70, 7196676 Loctite® Fixmaster® Rapid Rubber Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70, 7196677 Loctite® Fixmaster® Rapid Rubber Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70, 7197001 Loctite® Hand Pump, 250 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 10697002 Loctite® Hand Held Pneumatic Cartridge Dispenser, 300 ml. . . . . . . . . . . . . . . . . 57, 11197006 Loctite® Digital Syringe Dispensing System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11297007 Loctite® Integrated Semi-Automatic Controller Dispenser 0-100 psi . . . . . . . . . . . . . 11497010 Loctite® Integrated Semi-Automatic Controller Dispenser 0-15 psi . . . . . . . . . . . . . . 11497017 Loctite® Integrated Semi-Auto. Controller Disp. w/Low Level Sensor 0-100 psi. . . . . 11497020 Loctite® Integrated Semi-Auto. Controller Disp. with Low Level Sensor 0-15 psi. . . . 11497042 Loctite® Dual Cartridge Pneumatic Applicator, 50 ml . . . . . . . . . . . . . . . . . . . . . . . . . 10697111 Loctite® Hand Held Applicator, Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11597112 Loctite® Hand Held Applicator, Pneumatic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11597113 Loctite® Stationary Applicator Valve with 1/4" Feed Line . . . . . . . . . . . . . . . . . . 116, 11797114 Loctite® Stationary Applicator Valve with 3/8" Feed Line . . . . . . . . . . . . . . . . . . 116, 11797115 Loctite® Electric Rotospray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11497116 Loctite® Hand Held Applicator, Pneumatic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11597118 Loctite® Advancing Slide, 50 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11497119 Loctite® Advancing Slide, 100 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11497123 Loctite® Single Channel Automatic Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . 114, 11997130 Loctite® LV Hand Held Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11597132 Loctite® Vari-Drop™ Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11597135 Loctite® Diaphragm Valve with 1/4" Feed Line . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 11797136 Loctite® Diaphragm Valve with 3/8" Feed Line . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 11797200 Loctite® Valve Body Adapter for 98009 & 98013 Dispense Valves . . . . . . . . . . . . . . . 11997207 Loctite® Clear Syringe Barrel Kit, 10 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11397208 Loctite® Air Line Adapters, 10 ml/pkg. of 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11397210 Loctite® Ultraviolet Glasses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123, 125, 127, 12897211 Loctite® In-Line Flow Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11997215 Loctite® Cartridge-Syringe Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111, 11397216 Loctite® Syringe Starter Kit, 10 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11397221 Loctite® Dispense Needle 16 Gauge, Polyethylene Tapered, 1 1/4 ", Grey, (50 pk) . . . 11897222 Loctite® Dispense Needle 18 Gauge, Polyethylene Tapered, 1 1/4", Green (50 pk) . . . 11897223 Loctite® Dispense Needle 20 Gauge, Polyethylene Tapered, 1 1/4", Pink (50 pk) . . . . 11897224 Loctite® Dispense Needle 22 Gauge, Polyethylene Tapered, 1 1/4", Blue (50 pk) . . . . 11897225 Loctite® Dispense Needle 15 Gauge, Stainless Steel Straight,1/2", Amber (50 pk) . . . 11897226 Loctite® Dispense Needle 18 Gauge, Stainless Steel Straight,1/2", Green (50 pk) . . . 11897227 Loctite® Dispense Needle 20 Gauge, Stainless Steel Straight, 1/2", Pink (50 pk) . . . . 11897228 Loctite® Dispense Needle 25 Gauge, Stainless Steel Straight, 1/2", Red (50 pk) . . . . 11897229 Loctite® Dispense Needle 15 Gauge, Polypropylene Flexible, 1 1/2", Amber (50 pk) . 11897230 Loctite® Dispense Needle 18 Gauge, Polypropylene Flexible, 1 1/2", Green (50 pk) . . 11897231 Loctite® Dispense Needle 20 Gauge, Polypropylene Flexible, 1 1/2", Pink (50 pk) . . . 11897232 Loctite® Dispense Needle 25 Gauge, Polypropylene Flexible, 1 1/2", Red (50 pk) . . . 11897233 Loctite® Luer-Lok Adapter Kit (20 Luer-Loks, 5 Adapters) . . . . . . . . . . . . . . . . . . . . . 11897238 Loctite® Dispense Needle 25 Gauge, Stainless Steel, PTFE Lined, 1", Pink (50 pk) . . 11897244 Loctite® Clear Syringe Kit, 30 ml/pkg. of 20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11397245 Loctite® Air Line Adapters, 30 and 55 ml/pkg. of 2. . . . . . . . . . . . . . . . . . . . . . . . . . . 11397246 Loctite® UV Lamp for Zeta® 7411-S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12597248 Loctite® Dispense Needle Tip Caps (50 pk). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11897261 Loctite® Dispense Needle 15 Gauge, High Density Polyethylene, White (50 pk). . . . . 11897262 Loctite® Variety Tips, Helical Thread, 1/2" SS, Taper and Polyethelyne Tips . . . . . . . . 11897263 Loctite® Black Syringe Kit, 10 ml/pkg. of 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11397264 Loctite® Black Syringe Kit, 30 ml/pkg. of 20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11397273 Loctite® Flex™ Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7097294 Loctite® Syringe Starter Kit, 30 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11397295 Loctite® Valve Body Adapter for 97113 & 97114 Dispense Valves . . . . . . . . . . . . . . . 11997412 Loctite® Fixmaster® Flex 80™ Liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70, 7197413 Loctite® Fixmaster® Flex 80™ Liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70, 7197422 Loctite® Fixmaster® Flex 80™ Putty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70, 7197423 Loctite® Fixmaster® Flex 80™ Putty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70, 7197434 Loctite® Fixmaster® 4 Minute Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78, 8097443 Loctite® Fixmaster® Stainless Steel Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79, 8197453 Loctite® Fixmaster® Aluminum Liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79, 8197463 Loctite® Fixmaster® Aluminum Putty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79, 8197473 Loctite® Fixmaster® Superior Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79, 8197483 Loctite® Fixmaster® Steel Liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79, 81
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
BY
PR
OD
UC
T &
ITE
M N
UM
BE
RIN
DE
X
145NOTE: Can’t find a Loctite® product/item number? Contact Customer Service for assistance at: 1-800-243-4874.
97484 Loctite® Fixmaster® Steel Liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79, 8197509 Loctite® Disp. Tip, Formable, 21 Gauge, High Density Polyethylene, Clear (50 pk) . . 11897510 Loctite® Disp. Tip, Formable, 21 Gauge, High Density Polyethylene, Clr. (1000 pk) . . 11897572 Loctite® Fixmaster® Marine Chocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 8397762 Loctite® Nordbak® Ceramic Tile Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102, 10398003 Loctite® Zeta® 7415 UV Benchtop Conveyor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12698004 Fusion Lamp Assembly & Power Supply 208V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12798005 Fusion Lamp Assembly & Power Supply 240V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12798006 Loctite® Press-Pak™ 1000 Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11298009 Loctite® Light Cure Dispense Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 11798011 Loctite® Hysol™ Reactive Urethane Cartridge Dispenser . . . . . . . . . . . . . . . . . . . . . . 10898012 Loctite® Cartridge Pre-Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10998013 Loctite® Cyanoacrylate Dispense Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 11798022 Loctite® Cartridge Pusher, 300 ml. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11198023 Loctite® Digital Dispense Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11498024 Loctite® Digital Multi-Function Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11498026 Loctite® Manual Syringe Applicator, 30 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10698029 Loctite® Hysol™ 050-LITE Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 10898030 Loctite® Hysol™ 050 Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 10898031 Loctite® Hysol™ 050-HT Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 10898032 Loctite® Hysol™ 050-GAS Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 10898033 Loctite® Hysol™ 075 Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 10898034 Loctite® Hysol™ 075-LT Hot Melt Applicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 10898035 Loctite® Hysol™ 175 Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 10898036 Loctite® Hysol™ 175-AIR Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 10898037 Loctite® Hysol™ 175-SPRAY Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . 27, 10898038 Loctite® Hysol™ Wheelcoater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10898039 Loctite® Zeta® 7401 UV Chamber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12898040 Loctite® Hysol™ 175-AIR HT Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . 27, 10898041 Loctite® Hysol™ 175-SPRAY HT Spray Applicator . . . . . . . . . . . . . . . . . . . . . . . . 27, 10898042 Loctite® Bench Mount Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10898043 Loctite® Pneumatic Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10898046 Loctite® Zeta® 7750 Programmable UV Wand System . . . . . . . . . . . . . . . . . . . . . . . . 12498048 Loctite® Zeta® 7021 Spot Radiometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12998049 Loctite® Foot Pedal Dispenser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11298050 Loctite® Foot Pedal Dispenser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11298060 Loctite® Zeta® 7420 Visible Light Flood System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12598061 Loctite® Disp. Needle 16 Gauge, Polyethylene Tapered, 1 1/4", Grey (1000 pk) . . . . . 11898062 Loctite® Disp. Needle 18 Gauge, Polyethylene Tapered, 1 1/4", Green (1000 pk) . . . . 11898063 Loctite® Disp. Needle 20 Gauge, Polyethylene Tapered, 1 1/4", Pink (1000 pk) . . . . . 11898064 Loctite® Disp. Needle 22 Gauge, Polyethylene Tapered, 1 1/4", Blue (1000 pk) . . . . . 11898065 Loctite® Disp. Needle 15 Gauge, Stainless Steel Straight, 1/2", Amber (1000 pk) . . . 11898066 Loctite® Disp. Needle 18 Gauge, Stainless Steel Straight, 1/2", Green (1000 pk) . . . . 11898067 Loctite® Disp. Needle 20 Gauge, Stainless Steel Straight, 1/2", Pink (1000 pk) . . . . . 11898068 Loctite® Disp. Needle 25 Gauge, Stainless Steel Straight, 1/2", Red (1000 pk) . . . . . 11898069 Loctite® Disp. Needle 15 Gauge, Polypropylene Flexible, 1 1/2", Amber (1000 pk) . . 11898070 Loctite® Disp. Needle 18 Gauge, Polypropylene Flexible, 1 1/2", Green (1000 pk) . . . 11898071 Loctite® Dispense Needle 20 Gauge, Polypropylene Flexible, 1 1/2" Pink (1000 pk). . 11898073 Loctite® Disp. Needle 25 Gauge, Stainless Steel, PTFE Lined, 1", Pink (1000 pk). . . . 11898074 Loctite® Dispense Needle 15 Gauge, High Density Polyethylene, White (1000 pk). . . 11898079 Loctite® Shot Miser™ Valve Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11498080 Loctite® Dispense Needle 22 Gauge, Stainless Steel Straight, 1/2", Blue (1000 pk) . . 11898081 Loctite® Zeta® 7215 High Intensity UV Chamber (Mercury Arc) . . . . . . . . . . . . . . . . . 12898082 Loctite® Disp. Needle 25 Gauge, Polypropylene Flexible, 1 1/2", Red (1000 pk). . . . . 11898083 Loctite® Fluorescence Detector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11998084 Loctite® Micro Needle Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 11798085 Loctite® Shot Miser™ Dispense Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 11798086 Loctite® Zeta® 7011-A Dosimeter-Radiometer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12998089 Loctite® Zeta® 7011-V Dosimeter-Radiometer. . . . . . . . . . . . . . . . . . . . . . . . . . . 123, 12998090 Loctite® Shot Miser™ Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11498100 Loctite® Dispense Needle, 22 Gauge, Stainless Steel Straight, 1/2" Blue (50 pk) . . . . 11898101 Loctite® Lens, 50 mm, for Fluorescence Detector . . . . . . . . . . . . . . . . . . . . . . . . . . . 11998102 Loctite® Lens, 9 mm, for Fluorescence Detector . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11998103 Loctite® Lens, 28 mm, for Fluorescence Detector . . . . . . . . . . . . . . . . . . . . . . . . . . . 11998104 Loctite® Disp. Needle, 30 Gauge, Stainless Steel Straight, 1/2" Lavender (50 pk) . . . 11898105 Loctite® Disp. Needle, 30 Gauge, Stainless Steel Straight, 1/2" Lavender (1000 pk) . 11898114 Loctite® Dispense Needle, 32 Gauge, Stainless Steel Straight, 1/4" Yellow (50 pk) . . 11898115 Loctite® Disp. Needle, 32 Gauge, Stainless Steel Straight, 1/4" Yellow (1000 pk) . . . 118
98116 Loctite® Shot Miser™ Dispense System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11298117 Loctite® Syringe Air Line Adapter and Filter, 3 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11398118 Loctite® Syringe Air Line Adapter and Filter, 10 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . 11398128 Loctite® Cartridge Dispense Tip, Closed End (10 pk) . . . . . . . . . . . . . . . . . . . . . . . . . 11198131 Loctite® Hysol™ Bulk-12 System -115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11098132 Loctite® Hysol™ Bulk-12 System -230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11098133 Loctite® Hysol™ Bulk-14 System -115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11098134 Loctite® Hysol™ Bulk-14 System -230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11098135 Loctite® Hysol™ Bulk-34 System -230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11098157A Loctite® Zeta® 7740 UV Wand System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12498163 Loctite® Dispense Needle, 14 Gauge, Stainless Steel Straight, 1 1/2" White (50 pk) . 11898164 Loctite® Disp. Needle, 14 Gauge, Stainless Steel Straight, 1 1/2" White (1000 pk) . . 11898165 Loctite® Disp. Needle, 15 Gauge, Stainless Steel Straight, 1 1/2" Amber (50 pk) . . . . 11898166 Loctite® Disp. Needle, 15 Gauge, Stainless Steel Straight, 1 1/2" Amber (1000 pk) . . 11898167 Loctite® Dispense Needle, 18 Gauge, Stainless Steel Straight, 1 1/2" Green (50 pk) . 11898168 Loctite® Disp. Needle, 18 Gauge, Stainless Steel Straight, 1 1/2" Green (1000 pk) . . 11898169 Loctite® Dispense Needle, 20 Gauge, Stainless Steel Straight, 1 1/2" Pink (50 pk) . . 11898170 Loctite® Disp. Needle, 20 Gauge, Stainless Steel Straight, 1 1/2" Pink (1000 pk). . . . 11898171 Loctite® Disp. Needle, 21 Gauge, Stainless Steel Straight, 1 1/2" Purple (50 pk) . . . . 11898172 Loctite® Disp. Needle, 21 Gauge, Stainless Steel Straight, 1 1/2" Purple (1000 pk) . . 11898173 Loctite® Dispense Needle, 22 Gauge, Stainless Steel Straight, 1 1/2" Blue (50 pk) . . 11898174 Loctite® Disp. Needle, 22 Gauge, Stainless Steel Straight, 1 1/2" Blue (1000 pk). . . . 11898175 Loctite® Disp. Needle, 23 Gauge, Stainless Steel Straight, 1 1/2" Orange (50 pk) . . . 11898176 Loctite® Disp. Needle, 23 Gauge, Stainless Steel Straight, 1 1/2" Orange (1000 pk) . 11898177 Loctite® Dispense Needle, 25 Gauge, Stainless Steel Straight, 1 1/2" Red (50 pk) . . . 11898178 Loctite® Disp. Needle, 25 Gauge, Stainless Steel Straight, 1 1/2" Red (1000 pk) . . . . 11898179 Loctite® Disp. Needle, 27 Gauge, Stainless Steel Straight, 1 1/2" Light Grey (50 pk) . 11898180 Loctite® B1719 Disp. Needle, 27 Gauge, S. S. Straight, 1 1/2" Light Grey (1000 pk) . 11898181 Loctite® Cartridge Tube-Fitting Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11198192 Loctite® 10 ml Syringe Manual Plunger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10698193 Loctite® 30 ml Syringe Manual Plunger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10698194 Loctite® Dispense Needle, 14 Gauge, Stainless Steel Straight, 5/16" Olive (50 pk). . . 11898195 Loctite® Dispense Needle, 14 Gauge, Stainless Steel Straight, 5/16" Olive (100 pk). . 11898196 Loctite® Dispense Needle, 18 Gauge, Stainless Steel Straight, 1/4" Green (50 pk) . . . 11898197 Loctite® Dispense Needle, 18 Gauge, Stainless Steel Straight, 1/4" Green (1000 pk) . 11898198 Loctite® Dispense Needle, 20 Gauge, Stainless Steel Straight, 1/4" Pink (50 pk) . . . . 11898199 Loctite® Dispense Needle, 20 Gauge, Stainless Steel Straight, 1/4" Pink (1000 pk) . . 11898200 Loctite® Dispense Needle, 21 Gauge, Stainless Steel Straight, 1/4" Purple (50 pk) . . 11898201 Loctite® Dispense Needle, 21 Gauge, S.S. Straight, 1/4" Purple (1000 pk). . . . . . . . . 11898202 Loctite® Dispense Needle, 25 Gauge, Stainless Steel Straight, 5/16" Red (50 pk) . . . 11898203 Loctite® Dispense Needle, 25 Gauge, Stainless Steel Straight, 5/16" Red (1000 pk) . 11898204 Loctite® Dispense Needle, 27 Gauge, Stainless Steel Straight, 5/16" Clear (50 pk) . . 11898205 Loctite® Dispense Needle, 27 Gauge, S.S. Straight, 5/16" Clear (1000 pk) . . . . . . . . . 11898206 Loctite® Disp. Needle, 30 Gauge, Stainless Steel Straight, 5/16" Lavender ( 50 pk) . . 11898207 Loctite® Disp. Needle, 30 Gauge, S.S. Straight, 5/16" Lavender (1000 pk). . . . . . . . . 11898208 Loctite® Dispense Needle, 14 Gauge, Stainless Steel Straight, 1/2" Olive (50 pk). . . . 11898209 Loctite® Dispense Needle, 14 Gauge, Stainless Steel Straight, 1/2" Olive (1000 pk). . 11898210 Loctite® Dispense Needle, 21 Gauge, Stainless Steel Straight, 1/2" Purple (50 pk) . . 11898211 Loctite® Disp. Needle, 21 Gauge, Stainless Steel Straight, 1/2" Purple (1000 pk) . . . 11898212 Loctite® Dispense Needle, 23 Gauge, Stainless Steel Straight, 1/2" Orange (50 pk) . . 11898213 Loctite® Disp. Needle, 23 Gauge, Stainless Steel Straight, 1/2" Orange (1000 pk) . . . 11898214 Loctite® Dispense Needle, 27 Gauge, Stainless Steel Straight, 1/2" Clear (50 pk) . . . 11898215 Loctite® Dispense Needle, 27 Gauge, Stainless Steel Straight, 1/2" Clear (1000 pk) . 11898216 Loctite® Dispense Needle, 14 Gauge, Stainless Steel Straight, 1" White (50 pk) . . . . 11898217 Loctite® Dispense Needle, 14 Gauge, Stainless Steel Straight, 1" White (1000 pk) . . 11898218 Loctite® Dispense Needle, 15 Gauge, Stainless Steel Straight, 1" Amber (50 pk) . . . . 11898219 Loctite® Dispense Needle, 15 Gauge, Stainless Steel Straight, 1" Amber (1000 pk) . . 11898222 Loctite® Dispense Needle, 18 Gauge, Stainless Steel Straight, 1" Green (50 pk) . . . . 11898223 Loctite® Dispense Needle, 18 Gauge, Stainless Steel Straight, 1" Green (1000 pk) . . 11898224 Loctite® Dispense Needle, 20 Gauge, Stainless Steel Straight, 1" Pink (50 pk). . . . . . 11898225 Loctite® Dispense Needle, 20 Gauge, Stainless Steel Straight, 1" Pink (1000 pk). . . . 11898226 Loctite® Dispense Needle, 21 Gauge, Stainless Steel Straight, 1" Purple (50 pk) . . . . 11898227 Loctite® Dispense Needle, 21 Gauge, Stainless Steel Straight, 1" Purple (1000 pk) . . 11898228 Loctite® Dispense Needle, 22 Gauge, Stainless Steel Straight, 1" Blue (50 pk). . . . . . 11898229 Loctite® Dispense Needle, 22 Gauge, Stainless Steel Straight, 1" Blue (1000 pk). . . . 11898230 Loctite® Dispense Needle, 23 Gauge, Stainless Steel Straight, 1" Orange (50 pk) . . . 11898231 Loctite® Dispense Needle, 23 Gauge, Stainless Steel Straight, 1" Orange (1000 pk) . 11898232 Loctite® Dispense Needle, 25 Gauge, Stainless Steel Straight, 1" Red (50 pk) . . . . . . 118
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
BY
PR
OD
UC
T &
IT
EM
NU
MB
ER
IND
EX
146
98233 Loctite® Dispense Needle, 25 Gauge, Stainless Steel Straight, 1"Red (1000 pk) . . . . 11898234 Loctite® Disp. Needle, 27 Gauge, Stainless Steel Straight, 1" Light Grey (50 pk) . . . . 11898235 Loctite® Disp. Needle, 27 Gauge, Stainless Steel Straight, 1" Light Grey (1000 pk) . . 11898236 Loctite® Dispense Needle, 14 Gauge, Stainless Steel, 45°, 1/2" White (50 pk) . . . . . . 11898237 Loctite® Dispense Needle, 14 Gauge, Stainless Steel, 45°, 1/2" White (1000 pk) . . . . 11898238 Loctite® Dispense Needle, 14 Gauge, Stainless Steel, 90°, 1/2" White (50 pk) . . . . . . 11898239 Loctite® Dispense Needle, 14 Gauge, Stainless Steel, 90°, 1/2" White (1000 pk) . . . . 11898240 Loctite® Dispense Needle, 15 Gauge, Stainless Steel, 45°, 1/2"" (50 pk) . . . . . . . . . . 11898241 Loctite® Dispense Needle, 15 Gauge, Stainless Steel, 45°, 1/2" Amber (1000 pk) . . . 11898242 Loctite® Dispense Needle, 15 Gauge, Stainless Steel, 90°, 1/2" Amber (50 pk) . . . . . 11898243 Loctite® Dispense Needle, 15 Gauge, Stainless Steel, 90°, 1/2" Amber (1000 pk) . . . 11898244 Loctite® Dispense Needle, 18 Gauge, Stainless Steel, 45°, 1/2"" (50 pk) . . . . . . . . . . 11898245 Loctite® Dispense Needle, 18 Gauge, Stainless Steel, 45°, 1/2"" (1000 pk) . . . . . . . . 11898246 Loctite® Dispense Needle, 18 Gauge, Stainless Steel, 90°, 1/2" Green (50 pk). . . . . . 11898247 Loctite® Dispense Needle, 18 Gauge, Stainless Steel, 90°, 1/2" Green (1000 pk). . . . 11898248 Loctite® Dispense Needle, 20 Gauge, Stainless Steel, 45°, 1/2" Pink (50 pk) . . . . . . . 11898249 Loctite® Dispense Needle, 20 Gauge, Stainless Steel, 45°, 1/2" Pink (1000 pk) . . . . . 11898250 Loctite® Dispense Needle, 20 Gauge, Stainless Steel, 90°, 1/2" Pink (50 pk) . . . . . . . 11898251 Loctite® Dispense Needle, 20 Gauge, Stainless Steel, 90°, 1/2" Pink (1000 pk) . . . . . 11898252 Loctite® Dispense Needle, 21 Gauge, Stainless Steel, 45°, 1/2" Purple (50 pk) . . . . . 11898253 Loctite® Dispense Needle, 21 Gauge, Stainless Steel, 45°, 1/2" Purple (1000 pk) . . . 11898254 Loctite® Dispense Needle, 21 Gauge, Stainless Steel, 90°, 1/2" Purple (50 pk) . . . . . 11898255 Loctite® Dispense Needle, 21 Gauge, Stainless Steel, 90°, 1/2" Purple (1000 pk) . . . 11898256 Loctite® Dispense Needle, 22 Gauge, Stainless Steel, 45°, 1/2" Blue (50 pk) . . . . . . . 11898257 Loctite® Dispense Needle, 22 Gauge, Stainless Steel, 45°, 1/2" Blue (1000 pk) . . . . . 11898258 Loctite® Dispense Needle, 22 Gauge, Stainless Steel, 90°, 1/2" Blue (50 pk) . . . . . . . 11898259 Loctite® Dispense Needle, 22 Gauge, Stainless Steel, 90°, 1/2" Blue (1000 pk) . . . . . 11898260 Loctite® Dispense Needle, 23 Gauge, Stainless Steel, 45°, 1/2" Orange (50 pk). . . . . 11898261 Loctite® Dispense Needle, 23 Gauge, Stainless Steel, 45°, 1/2" Orange (1000 pk). . . 11898262 Loctite® Dispense Needle, 23 Gauge, Stainless Steel, 90°, 1/2" Orange (50 pk). . . . . 11898263 Loctite® Dispense Needle, 23 Gauge, Stainless Steel, 90°, 1/2" Orange (1000 pk). . . 11898264 Loctite® Dispense Needle, 25 Gauge, Stainless Steel, 45°, 1/2" Red (50 pk) . . . . . . . 11898265 Loctite® Dispense Needle, 25 Gauge, Stainless Steel, 45°, 1/2" Red (1000 pk) . . . . . 11898266 Loctite® Dispense Needle, 25 Gauge, Stainless Steel, 90°, 1/2" Red (50 pk) . . . . . . . 11898267 Loctite® Dispense Needle, 25 Gauge, Stainless Steel, 90°, 1/2" Red (1000 pk) . . . . . 11898268 Loctite® Dispense Needle, 27 Gauge, Stainless Steel, 45°, 1/2" Light Grey (50 pk) . . 11898269 Loctite® Disp. Needle, 27 Gauge, Stainless Steel, 45°, 1/2" Light Grey (1000 pk) . . . 11898270 Loctite® Dispense Needle, 27 Gauge, Stainless Steel, 90°, 1/2" Light Grey (50 pk) . . 11898271 Loctite® Disp. Needle, 27 Gauge, Stainless Steel, 90°, 1/2" Light Grey (1000 pk) . . . 11898272 Loctite® Dispense Needle, 14 Gauge, Polyethylene Taper, 1 1/4" Tan (50 pk) . . . . . . . 11898273 Loctite® Dispense Needle, 14 Gauge, Polyethylene Taper, 1 1/4" Tan (1000 pk) . . . . . 11898274 Air Filtration System - 115 V, 60 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12298275 Air Filtration System - 230 V, 50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12298276 Air Filtration System with Explosion-Proof Motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12298277 Benchtop Air Filtration System with Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12298278 Benchtop Air Filtration System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12298279 Loctite® 203 Benchtop Robot, 200 mm x 200 mm, 3 axis, 110 V . . . . . . . . . . . 120, 12198280 Loctite® 203 Benchtop Robot, 200 mm x 200 mm, 3 axis, 110 V CE Rated. . . . 120, 12198281 Loctite® 203 Benchtop Robot, 200 mm x 200 mm, 3 axis, 220 V . . . . . . . . . . . 120, 12198282 Loctite® 203 Benchtop Robot, 200 mm x 200 mm, 3 axis, 220 V CE Rated. . . . 120, 12198283 Loctite® 204 Benchtop Robot, 200 mm x 200 mm, 4 axis, 110 V . . . . . . . . . . . 120, 12198284 Loctite® 204 Benchtop Robot, 200 mm x 200 mm, 4 axis, 110 V CE Rated. . . . 120, 12198285 Loctite® 204 Benchtop Robot, 200 mm x 200 mm, 4 axis, 220 V . . . . . . . . . . . 120, 12198286 Loctite® 204 Benchtop Robot, 200 mm x 200 mm, 4 axis, 220 V CE Rated. . . . 120, 12198287 Loctite® 303 Benchtop Robot, 300 mm x 320 mm, 3 axis, 110 V . . . . . . . . . . . 120, 12198288 Loctite® 303 Benchtop Robot, 300 mm x 320 mm, 3 axis, 110 V CE Rated. . . . 120, 12198289 Loctite® 303 Benchtop Robot, 300 mm x 320 mm, 3 axis, 220 V . . . . . . . . . . . 120, 12198290 Loctite® 303 Benchtop Robot, 300 mm x 320 mm, 3 axis, 220 V CE Rated. . . . 120, 12198291 Loctite® 304 Benchtop Robot, 300 mm x 320 mm, 4 axis, 110 V . . . . . . . . . . . 120, 12198292 Loctite® 304 Benchtop Robot, 300 mm x 320 mm, 4 axis, 110 V CE Rated. . . . 120, 12198293 Loctite® 304 Benchtop Robot, 300 mm x 320 mm, 4 axis, 220 V . . . . . . . . . . . 120, 12198294 Loctite® 304 Benchtop Robot, 300 mm x 320 mm, 4 axis, 220 V CE Rated. . . . 120, 12198295 Loctite® 403 Cartesian Benchtop Robot, 400 mm x 400 mm, 3 axis, 110V . . . . 120, 12198296 Loctite® 403 Benchtop Robot, 400 mm x 400 mm, 3 axis, 110 V CE Rated. . . . 120, 12198297 Loctite® 403 Benchtop Robot, 400 mm x 400 mm, 3 axis, 220 V . . . . . . . . . . . 120, 12198298 Loctite® 403 Benchtop Robot, 400 mm x 400 mm, 3 axis, 220 V CE Rated. . . . 120, 12198299 Loctite® 404 Benchtop Robot, 400 mm x 400 mm, 4 axis, 110 V . . . . . . . . . . . 120, 12198300 Loctite® 404 Benchtop Robot, 400 mm x 400 mm, 4 axis, 110 V CE Rated. . . . 120, 121
98301 Loctite® 404 Benchtop Robot, 400 mm x 400 mm, 4 axis, 220 V . . . . . . . . . . . 120, 12198302 Loctite® 404 Benchtop Robot, 400 mm x 400 mm, 4 axis, 220 V CE Rated. . . . 120, 12198303 Loctite® S443 SCARA Robot, 440 mm arm length, 3 axis, 110 V. . . . . . . . . . . . 120, 12198304 Loctite® S443 SCARA Robot, 440 mm arm length, 3 axis, 110 V CE Rated . . . . 120, 12198305 Loctite® S443 SCARA Robot, 440 mm arm length, 3 axis, 220 V. . . . . . . . . . . . 120, 12198306 Loctite® S443 SCARA Robot, 440 mm arm length, 3 axis, 220 V CE Rated . . . . 120, 12198307 Loctite® S444 SCARA Robot, 440 mm arm length, 4 axis, 110 V. . . . . . . . . . . . 120, 12198308 Loctite® S444 SCARA Robot, 440 mm arm length, 4 axis, 110 V CE Rated . . . . 120, 12198309 Loctite® S444 SCARA Robot, 440 mm arm length, 4 axis, 220 V. . . . . . . . . . . . 120, 12198310 Loctite® S444 SCARA Robot, 440 mm arm length, 4 axis, 220 V CE Rated . . . . 120, 12198311 Loctite® Collapsible Bottle Holder, 1 Liter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10698314 Loctite® Clear Syringe Kit, 55 ml. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11398315 Loctite® Black Syringe Kit, 55 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11398317A Loctite® Zeta® 7735 UV Wand System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12498319 Loctite® Pneumatic Cartridge Dispensing Retainer, 300 ml . . . . . . . . . . . . . . . . . . . . 11198339 Loctite® Lamp/Reflector Module 50 W (HPMA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12498344 Loctite® Ribbon Tip Adapter (10 pk) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10798345 Loctite® Soft Squeeze Bottle, 2 oz. (50 pk) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10698346 Loctite® Soft Squeeze Bottle, 4 oz. (50 pk) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10698347 Loctite® Soft Squeeze Bottle, 8 oz. (50 pk) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10698348 Loctite® Dunce Cap with Red Sealer Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10698349 Loctite® Dunce Cap with Red Sealer Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10698350 Loctite® Luer-Slip Cap for 2 oz. Soft Bottles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10698351 Loctite® Luer-Slip Cap for 4/8 oz. Soft Bottles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10698359 Loctite® Bottle Reservoir, 2.25 gal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11498364 Loctite® 50 ml Sq. Mix Nozzle, 5.3 mm, 16 Elements, Luer/Stepped Tip (1000 pk) . . 10798367 200/400 ml Mix Nozzle, 9.3 mm dia., 24 Elements, Snap Tip (1000 pk)+B1755 . . . . 10798371 Loctite® Cartridge-Needle Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11198372 Loctite® Nordbak® High Temperature Pneu-Wear . . . . . . . . . . . . . . . . . . . . 101, 102, 10398373 Loctite® 200/400 ml Square Mix Nozzle, 5.3 mm, 24 Elements, (10 pk) . . . . . . . . . . 10798374 Loctite® 200/400 ml Square Mix Nozzle, 5.3 mm, 24 Elements, (1000 pk) . . . . . . . . 10798382 Loctite® Nordbak® Pneu-Wear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 10398383 Loctite® Nordbak® Pneu-Wear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 10398385 Loctite® Disp. Needle, 14 Gauge, Polyethylene Tapered, UV, 1 1/4" White (50 pk) . . . 11898386 Loctite® Disp. Needle, 14 Gauge, Polyethylene Tapered, UV, 1 1/4" White (1000 pk) . 11898387 Loctite® Dispense Needle, 16 Gauge, Polyethylene Tapered, UV, 1 1/4" Grey (50 pk). 11898388 Loctite® Disp. Needle, 16 Gauge, Polyethylene Tapered, UV, 1 1/4" Grey (1000 pk) . . 11898389 Loctite® Disp. Needle, 18 Gauge, Polyethylene Tapered, UV, 1 1/4" Green (50 pk) . . . 11898390 Loctite® Disp. Needle, 18 Gauge, Polyethylene Tapered, UV, 1 1/4" Green (1000 pk) . 11898391 Loctite® Disp. Needle, 20 Gauge, Polyethylene Tapered, UV, 1 1/4" Pink (1000 pk) . . 11898392 Loctite® Disp. Needle, 20 Gauge, Polyethylene Tapered, UV, 1 1/4" Pink (1000 pk) . . 11898393 Loctite® Dispense Needle, 22 Gauge, Polyethylene Tapered, UV, 1 1/4" Blue (50 pk) . 11898394 Loctite® Disp. Needle, 22 Gauge, Polyethylene Tapered, UV, 1 1/4" Blue (1000 pk) . . 11898396 Loctite® Dispense Needle, 15 Gauge, Stainless Steel Straight, 1/2" Amber (50 pk) . . 11898397 Loctite® Dispense Needle, 15 Gauge, Stainless Steel Straight, 1/2" Amber (1000 pk) 11898398 Loctite® Dispense Needle, 18 Gauge, Stainless Steel Straight, 1/2" Green (50 pk) . . . 11898399 Loctite® Dispense Needle, 18 Gauge, Stainless Steel Straight, 1/2" Green (1000 pk) . 11898400 Loctite® Dispense Needle, 20 Gauge, Stainless Steel Straight, 1/2" Pink (50 pk) . . . . 11898401 Loctite® Dispense Needle, 20 Gauge, Stainless Steel Straight, 1/2" Pink (1000 pk) . . 11898402 Loctite® Dispense Needle, 22 Gauge, Stainless Steel Straight, 1/2" Blue (50 pk) . . . . 11898403 Loctite® Dispense Needle, 22 Gauge, Stainless Steel Straight, 1/2" Blue (1000 pk) . . 11898404 Loctite® Dispense Needle, 25 Gauge, Stainless Steel Straight, 1/2" Red (50 pk) . . . . 11898405 Loctite® Dispense Needle, 25 Gauge, Stainless Steel Straight, 1/2" Red (1000 pk) . . 11898409 Loctite® 200/400 ml Mix Nozzle, 10 mm dia., 24 Elements, Stepped Tip, (1000 pk) . 10798410 Loctite® 12 mm Ribbon Tip (500 pk) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10798411 Loctite® 25 mm Ribbon Tip (500 pk) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10798412 Loctite® 43 mm Ribbon Tip (500 pk) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10798413 Loctite® Zeta® 7411-S UV Flood System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12598414 Loctite® Hand Pump, 50 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 10698415 Loctite® Caulking Gun Conversion Kit, 10:1 ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10698416 Loctite® Syringe Starter Kit, 55 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11398417 Loctite® Analog Syringe Dispensing System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11298418 Loctite® LED Light Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12398419 Loctite® AC Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12398420 Loctite® Optional Shutter Assembly for Zeta® 7411-S. . . . . . . . . . . . . . . . . . . . . . . . . 12598424 Loctite® Dispense Needle, 21 Gauge, Stainless Steel Straight, 1/2" Purple (50 pk) . . 11898425 Loctite® Dispense Needle, 21 Gauge, Stainless Steel Straight, 1/2" Purple (1000 pk) 11898426 Loctite® Advancing Slide Dispense Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
NOTE: Can’t find a Loctite® product/item number? Contact Customer Service for assistance at: 1-800-243-4874.
BY
PR
OD
UC
T &
ITE
M N
UM
BE
RIN
DE
X
147
98427 Loctite® Single Rotary Dispense Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12198428 Loctite® Dual Rotary Dispense Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12198430 Loctite® 200/400 ml Mix Nozzle, 9.3 mm, 40 Elements, Stepped Tip (500 pk) . . . . . 10798431 Loctite® Industrial Manual Grease Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11198432 Loctite® Industrial Pneumatic Grease Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11198433 Loctite® Industrial Cordless Electric Grease Dispenser . . . . . . . . . . . . . . . . . . . . . . . . 11198439 Loctite® Showcase Needle Variety Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11898440 Loctite® Foot Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12398442 Loctite® Remote Mount Heat Sink. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12398443 Loctite® Control Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12398444 Loctite® 50 ml Sq. Mix Nozzle, 5.3 mm, 16 Elements, Luer/Stepped Tip (10 pk) . . . . 10798446 Loctite® Roller Assembly, 1" Wide Band . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11198447 Loctite® Replacement Rollers, 1" Wide (3 pk) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11198448 Loctite® Roller Assembly, 2" Wide Band . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11198449 Loctite® Replacement Rollers, 2" Wide (3 pk) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11198468 Loctite® Flex™ Rubber Primer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7098471 Loctite® Flex™ Metal Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7098693 Loctite® Fixmaster® Flex™ Conveyor Belt Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . 70, 7198732 Loctite® Nordbak® Brushable Ceramic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 10398733 Loctite® Nordbak® Brushable Ceramic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 10398742 Loctite® Fixmaster® Wear Resistant Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79, 8198743 Loctite® Fixmaster® Wear Resistant Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79, 8198853 Loctite® Fixmaster® Metal Magic Steel™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79, 8198992 Loctite® Nordbak® Castable Wearing Compound . . . . . . . . . . . . . . . . . . . . 100, 102, 10399112 Loctite® Nordbak® High Temperature Wearing Compound . . . . . . . . . . . . . 100, 102, 10399361 Loctite® Fixmaster® Floor Fill. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 8399365 Loctite® Fixmaster® Floor Fill. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 8399392 Loctite® Fixmaster® High Performance Epoxy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78, 8099393 Loctite® Fixmaster® High Performance Epoxy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78, 8099394 Loctite® Fixmaster® High Performance Epoxy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78, 8099545 Loctite® Fixmaster® Deep Pour Grout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 8399626 Loctite® Fixmaster® Etching Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7099812 Loctite® Nordbak® Wearing Compound. . . . . . . . . . . . . . . . . . . . . . . . . . . . 100, 102, 10399813 Loctite® Nordbak® Wearing Compound. . . . . . . . . . . . . . . . . . . . . . . . . . . . 100, 102, 10399912 Loctite® Fixmaster® Steel Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79, 8199913 Loctite® Fixmaster® Steel Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79, 8199914 Loctite® Fixmaster® Steel Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79, 81980127 Loctite® Zeta® 7500 Portable UV Spot Lamp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125980160 Loctite® High Intensity UV Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127980161 Loctite® 5" UV Bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127980550 Loctite® Zeta® 7600 UV Benchtop Conveyor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126982033 Loctite® Mercury Vapor Bulb. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125982719 Loctite® Bond-A-Matic® 3000 Dispenser, 0-15 psi . . . . . . . . . . . . . . . . . . . . . . . . 57, 112982720 Loctite® Bond-A-Matic® 3000 Reservoir, 0-15 psi with Low Level Sensor . . . . . . . . . 114982722 Loctite® Bond-A-Matic® 3000 Dispenser, 0-100 psi . . . . . . . . . . . . . . . . . . . . . . . 57, 112982723 Loctite® Bond-A-Matic® 3000 Reservoir, 0-100 psi with Low Level Sensor . . . . . . . . 114982726 Loctite® Bond-A-Matic® 3000 Reservoir, 0-100 psi. . . . . . . . . . . . . . . . . . . . . . . . . . . 114982727 Loctite® Bond-A-Matic® 3000 Reservoir, 0-100 psi. . . . . . . . . . . . . . . . . . . . . . . . . . . 114982880 Loctite® Gravity Feed Reservoir, 4 Liter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114983050 Loctite® UV Lamp, 400 W for Zeta® 7411-S . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125, 128983091 Loctite® 6" UV Bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126, 128983330 Loctite® Positive Displacement Pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114, 116, 117983436 Loctite® Dual Cartridge Manual Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106983437 Loctite® Dual Cartridge Pneumatic Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106983438 Loctite® Dual Cartridge Manual Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106983439 Loctite® Dual Cartridge Pneumatic Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106983440 Loctite® 50 ml Mix Nozzle, 6.3 mm, Luer Slip End (10 pk). . . . . . . . . . . . . . . . . . . . . 107983441 Loctite® 50 ml Mix Nozzle, 6.3 mm, Stepped End (10 pk) . . . . . . . . . . . . . . . 79, 80, 107983442 Loctite® 200/400ml Mix Nozzle, Stepped 6 mm End (10 pk) . . . . . . . . . . . . . . . . . . . 107983443 Loctite® 200/400ml Mix Nozzle, Stepped 8 mm End. . . . . . . . . . . . . . . . . . . . . . . . . . 107983444 Loctite® Luer-Lok Adapter for 6.3 and 8 mm Mix Nozzles . . . . . . . . . . . . . . . . . . . . . 107983445 Loctite® Caulking Gun Conversion Kit for 50 ml Cartridges . . . . . . . . . . . . . . . . . . . . 106983469 Loctite® D Bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127983470 Loctite® V Bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127983471 Loctite® H Bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127983531 Loctite® Manual Cartridge Applicator, 50 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80, 106983677 Loctite® Single Light Guide, 1m Long x 5 mm Diameter . . . . . . . . . . . . . . . . . . . . . . 124983684 Loctite® Dual Light Guide, 1m Long x 3 mm Diameter . . . . . . . . . . . . . . . . . . . . . . . . 124
983800 Loctite® Single Light Guide, 1.5m Long x 5 mm Diameter . . . . . . . . . . . . . . . . . . . . . 124983914 Loctite® Poppet Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 117984261 Loctite® Adapter for 300 ml Cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109984262 Loctite® Standard 1-Hole w/ Cap Dispensing Nozzle. . . . . . . . . . . . . . . . . . . . . . . . . . 109984263 Loctite® Adapter/Check Valve for Specialty Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . 109984264 Loctite® Needle Jet Dispensing Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109984265 Loctite® Diagonal Extension Dispensing Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109984266 Loctite® Flat Spreader Dispensing Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109984267 Loctite® 2-Hole Spreader Dispensing Nozzle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109984268 Loctite® 3-Hole Spreader Dispensing Nozzle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109984272 Loctite® Injection Needle Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109984569 Loctite® 50 ml Square Mix Nozzle, 5.3 mm End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107984570 Loctite® 200 ml Square Mix Nozzle, 7.5 mm End . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107984625 Loctite® Syringe Stand for 10 and 30 ml Syringe Barrels . . . . . . . . . . . . . . . . . . . . . . 113984650 Loctite® Air Line Filter for Syringe Dispensing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113984691 Loctite® 50 mm Advancing Slide For Use With 98024 Controller . . . . . . . . . . . . . . . . 114984818 Loctite® Replacement 100 W Lamp Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124984832 Loctite® Tube Fitting-1/4" MNPT-1/4" Feed Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111984833 Loctite® Tube Fitting-1/4" MNPT-3/8" Feed Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111984999 Loctite® Standard 1-Hole Nozzle .10" dia. X .16" LG . . . . . . . . . . . . . . . . . . . . . . . . . 109985001 Loctite® Spreader Nozzle (.08"x25"SQ) x 0.47'LG . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109985002 Loctite® Pencil Point Nozzle .08" dia. X .24"LG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109985003 Loctite® Precision Nozzle .05" dia. X .20" LG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109985004 Loctite® Extension Nozzle .10" dia. X .50" LG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109985045 Loctite® Dual Wand Adapter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124985087 Loctite® Heavy Duty Metal Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109985088 Loctite® Standard Adapter/Check Valve for Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . 109985110 Loctite® 2-Hole Nozzle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109985111 Loctite® 3-Hole Nozzle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109985112 Loctite® Diagonal Extension Nozzle, .14" Dia. x 1.23" LG . . . . . . . . . . . . . . . . . . . . . . 109985113 Loctite® Needle Extension Nozzle, .05" Dia. x 1.32" LG . . . . . . . . . . . . . . . . . . . . . . . . 109985114 Loctite® Spreader Extension Nozzle (.09" x 25" SQ) x 1.22" LG . . . . . . . . . . . . . . . . . 109985115 Loctite® L-Nozzle (ideal for overlap carton sealing) . . . . . . . . . . . . . . . . . . . . . . . . . . 109985116 Loctite® T-Nozzle (ideal for center-flap carton sealing) . . . . . . . . . . . . . . . . . . . . . . . . 109985122 Loctite® Replacement Standard Wide Spray Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . 109985211 Loctite® Narrow Spray Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109985216 Loctite® Ultra Wide Spray Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109985225 Loctite® Replacement Standard 1-Hole Nozzle, .08" Dia. Cone Tip . . . . . . . . . . . . . . . 109985243 Loctite® Tool Hanger/Balancer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109985245 Loctite® Universal Metal Dispenser for 200/400 ml Cartridges . . . . . . . . . . . . . . . . . . 106985246 Loctite® Dual Cartridge Manual Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106985247 Loctite® 200/400 Mix Nozzle, Stepped Tip, 10.8" Overall Length (10 pk) . . . . . . . . . . 107985248 Loctite® 200/400ml Mix Nozzle, Stepped Tip, 9" Overall Length (10 pk) . . . . . . . . . . 107985249 Loctite® Dual Cartridge Pneumatic Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106985397 Loctite® Air Line Filter, Regulator, Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109985545 Loctite® 200/400 Mix Nozzle, Stepped Tip, Keyed, 10.8" Overall Length (10 pk) . . . . 107985599 Loctite® 50 ml Mix Nozzle, 6.33 dia., 20 Elements, Stepped Tip, (4000 pk) . . . . . . . . 107985658 Loctite® 12 mm Ribbon Tip Nozzle (10 pk). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107985659 Loctite® 25 mm Ribbon Tip Nozzle (10 pk). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107985660 Loctite® 43 mm Ribbon Tip Nozzle (10 pk). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107985661 Loctite® 200/400 ml Snap Tip Mix Nozzle, 8 mm dia/, 8.9" Overall Length (10 pk) . . 107985662 Loctite® 200/400 ml Snap Tip Mix Nozzle, 9.3 mm dia., 9.3" Overall Length (10 pk) . 107985709 Loctite® Snap Tip Mix Nozzle and Ribbon Tip Sample Kit . . . . . . . . . . . . . . . . . . . . . . 107985940 Loctite® Visible Arc Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125986000 Loctite® Pump-A-Bead™ II Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112986087 Loctite® 50 ml Mix Nozzle, Stepped Tip, Keyed 5.9" Overall Length . . . . . . . . . . . . . . 107986091 Loctite® 4-Wire Conductor Cable with M 12 Connector . . . . . . . . . . . . . . . . . . . . . . . 119986300 Loctite® Poppet Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 117987246 Loctite® UV Lamp, 400 W for Zeta® 7401 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125, 128987351 Air Filtration System with 4 Exhaust Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122987354 Air Filtration System with 2 Exhaust Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122987527 Loctite® 200/400 ml Mix Nozzle, 8 mm dia., 24 Elements, Stepped Tip (1500 pk). . . 107988159 Loctite® Replacement Glass Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125988774 Loctite® Constant-On Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123998390 Loctite® Vari-Drop™ Applicator Brushes (10 pk) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118998400 Loctite® Dial-A-Seal® Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 1128965008 Loctite® Pressure Sensoring Cable for In-Line Flow Meter . . . . . . . . . . . . . . . . . . . . . 119
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
PRODUCT & PRODUCT PAGEITEM NO. NAME NO.
NOTE: Can’t find a Loctite® product/item number? Contact Customer Service for assistance at: 1-800-243-4874.
BY
BR
AN
D/P
RO
DU
CT
NA
ME
IND
EX
148
Benchtop Fume Filtration Units . . . . . . . . . . . . . . . . . . . . . . . . . .122Fume Filtration Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122Krytox® RFE Advanced PTFE Dry Lubricant . . . . . . . . . . . . . . .89, 90Krytox® RFE Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89, 90Krytox® RFE PFPE High Performance Lubricant . . . . . . . . . . .89, 90Krytox® RFE PFPE Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . .88, 90Loctite® 242® Threadlocker, Removable/Med. Str. . . .50, 52, 96, 97Loctite® 271™ Threadlocker, High Strength . . . . . . . .51, 52, 96, 97Loctite® 55™ Pipe Sealing Cord . . . . . . . . . . . . . . . . . . . . . . .98, 99Loctite® 5699™ Grey . . . . . . . . . . . . . . . . . . . . . . . . . .36, 37, 85, 87Loctite® 587™ Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85, 87Loctite® 5900® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . .36, 37Loctite® 5905™ Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . .36, 37Loctite® 5910® Flange Sealant . . . . . . . . . . . . . . . . . . .36, 37, 85, 87Loctite® 5920™ Flange Sealant . . . . . . . . . . . . . . . . . .34, 35, 85, 87Loctite® 598™ Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85, 87Loctite® Accelerators, Heptane . . . . . . . . . . . . . . . . . . . . . . . .48, 49Loctite® Accelerators, High Purity . . . . . . . . . . . . . . . . . . . . . .48, 49Loctite® Activators, Acetone . . . . . . . . . . . . . . . . . . . . . . . . . .48, 49Loctite® Activators, Fluorescent Solventless . . . . . . . . . . . . . . . . .49Loctite® Activators, Solventless (Monomer) . . . . . . . . . . . . . .48, 49Loctite® Analog Syringe Dispensing System . . . . . . . . . . . . . . . .112Loctite® Anti-Seize Compounds . . . . . . . . . . . . . . . . .64, 65, 66, 67Loctite® Aqua Power® Biodegradable Clnr. & Degreaser . .72, 74, 75Loctite® Assure™ Inst. Adh. Surface Curing Threadlocker . . .51, 52Loctite® Aviation Gasket Sealant . . . . . . . . . . . . . . . . . . . . . . .86, 87Loctite® Belt Dressing & Conditioner . . . . . . . . . . . . . . . . . . .76, 77Loctite® Belt Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70, 71Loctite® Benchtop Robots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120Loctite® Big Foot™ Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . .69Loctite® Big Foot™ Anti-Slip Coatings . . . . . . . . . . . . . . . . . . .68, 69Loctite® Big Foot™ Primers . . . . . . . . . . . . . . . . . . . . . . . . . . .68, 69Loctite® Black Max® Instant Adhesive, Toughened . . .12, 14, 62, 63Loctite® Bond-A-Matic® . . . . . . . . . . . . . . . . . . . . . . . .57, 112, 114Loctite® Bottles, Soft-Squeeze . . . . . . . . . . . . . . . . . . . . . . . . . . .106Loctite® Bulk Hot Melt Systems . . . . . . . . . . . . . . . . . . . . . . . . . .110Loctite® C-200® High Temperature Solid Film Lubricant . . . . .89, 91Loctite® C5-A® Copper Based Anti-Seize Lubricant . . . . . .64, 66, 67Loctite® Cartridge Systems . . . . . . . . . . . . . . . . . . . . . . . . .111, 113Loctite® Chisel® Gasket Remover (Methylene Chloride) . .73, 74, 75Loctite® Chisel® MC-Free Gasket Remover . . . . . . . . . . . .73, 74, 75Loctite® Clover® Duplex Packaging . . . . . . . . . . . . . . . . . . . . .92, 93Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . .92, 93Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . .92, 93Loctite® Cold Galvanizing Compound . . . . . . . . . . . . . . . . . . .76, 77Loctite® Color Guard®, Tough Rubber Coating . . . . . . . . . . . .76, 77Loctite® Complete Bottle Reservoir Dispense Systems . . . . . . . .112Loctite® Contact Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . .62, 63Loctite® Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114Loctite® Copper Gasket Adhesive . . . . . . . . . . . . . . . . . . . . . .86, 87Loctite® Cure Chambers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128Loctite® Cure Converyors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126Loctite® Cyanoacrylate Dispense Valve . . . . . . . . . . . . . . . .116, 117Loctite® Depend® Adhesive, No Mix . . . . . . . . . . . . . . .8, 10, 62, 63Loctite® Dial-A-Seal® Applicator . . . . . . . . . . . . . . . . . . . . . .57, 112 Loctite® Diaphragm Valve . . . . . . . . . . . . . . . . . . . . . . . . . .116, 117Loctite® Dielectric Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . .89, 91Loctite® Digital Dispense Controller . . . . . . . . . . . . . . . . . . . . . . .114Loctite® Digital Multi-Function Controller . . . . . . . . . . . . . . . . . .114Loctite® Digital Syringe Dispensing System . . . . . . . . . . . . . . . .112Loctite® Dispense Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118Loctite® Dual Light Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124Loctite® Dual Wand Adapter Kit . . . . . . . . . . . . . . . . . . . . . . . . . .124Loctite® Electrical Contact & Parts Cleaner . . . . . . . . . . . .73, 74, 75
Loctite® Electrical Contact Cleaner, Non-Flammable . . . . .73, 74, 75Loctite® Extend® Rust Treatment . . . . . . . . . . . . . . . . . . . . . . .76, 77Loctite® Extension Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109Loctite® Extreme Pressure Grease . . . . . . . . . . . . . . . . . . . . . .89, 91Loctite® Fastgasket® Flange Sealant . . . . . . . . . . . . . . . . . . . .36, 37Loctite® Fiber Optic Adhesives . . . . . . . . . . . . . . . . . . . . . . . .22, 23Loctite® Fixmaster® 2000° Putty . . . . . . . . . . . . . . . . . . . . .104, 105Loctite® Fixmaster® 4 Minute Epoxy . . . . . . . . . . . . . . . . . . . .78, 80Loctite® Fixmaster® Aluminum Liquid . . . . . . . . . . . . . . . . . . .79, 81Loctite® Fixmaster® Aluminum Putty . . . . . . . . . . . . . . . . . . . .79, 81Loctite® Fixmaster® Deep Pour Grout . . . . . . . . . . . . . . . . . . .82, 83Loctite® Fixmaster® Etching Agent . . . . . . . . . . . . . . . . . . . . . . . . .70Loctite® Fixmaster® Fast Cure Epoxy, Mixer Cups . . . . . . . . . .78, 80Loctite® Fixmaster® Fast Set Grout . . . . . . . . . . . . . . . . . . . . .82, 83Loctite® Fixmaster® Fast Set Steel Epoxy . . . . . . . . . . . . . . . .79, 81Loctite® Fixmaster® Fast Set Steel Putty . . . . . . . . . . . . . . . . .79, 81Loctite® Fixmaster® Flex 80™ Liquid . . . . . . . . . . . . . . . . . . . .70, 71Loctite® Fixmaster® Flex 80™ Putty . . . . . . . . . . . . . . . . . . . . .70, 71Loctite® Fixmaster® Flex™ Accelerator . . . . . . . . . . . . . . . . . . . . . .70Loctite® Fixmaster® Flex™ Cleaner . . . . . . . . . . . . . . . . . . . . . . . . .70Loctite® Fixmaster® Flex™ Conveyor Belt Repair Kit . . . . . . . .70, 71Loctite® Fixmaster® Flex™ Metal Primer . . . . . . . . . . . . . . . . . . . .70Loctite® Fixmaster® Floor Fill . . . . . . . . . . . . . . . . . . . . . . . . . .82, 83Loctite® Fixmaster® General Purpose Epoxy, Mixer Cups . . . .78, 80Loctite® Fixmaster® High Performance Epoxy . . . . . . . . . . . . .78, 80Loctite® Fixmaster® High Performance Quartz . . . . . . . . . . . .82, 83Loctite® Fixmaster® Instant Belt Repair . . . . . . . . . . . . . . . . . .70, 71Loctite® Fixmaster® Magna-Crete . . . . . . . . . . . . . . . . . . . . . .82, 83Loctite® Fixmaster® Marine Chocking . . . . . . . . . . . . . . . . . . .82, 83Loctite® Fixmaster® Metal Magic Steel™ . . . . . . . . . . . . . . . . .79, 81Loctite® Fixmaster® Poxy Pak™, Fast Cure Epoxy . . . . . . . . . .78, 80Loctite® Fixmaster® Rapid Rubber Repair . . . . . . . . . . . . . . . .70, 71Loctite® Fixmaster® Stainless Steel Putty . . . . . . . . . . . . . . . .79, 81Loctite® Fixmaster® Static Mixers . . . . . . . . . . . . . . . . . . . . . .79, 80Loctite® Fixmaster® Steel Liquid . . . . . . . . . . . . . . . . . . . . . . .79, 81Loctite® Fixmaster® Steel Putty . . . . . . . . . . . . . . . . . . . . . . . .79, 81Loctite® Fixmaster® Super Grout . . . . . . . . . . . . . . . . . . . . . . .82, 83Loctite® Fixmaster® Superior Metal . . . . . . . . . . . . . . . . . . . . .79, 81Loctite® Fixmaster® Underwater Repair Epoxy . . . . . . . . . . . .78, 80Loctite® Fixmaster® Wear Resistant Putty . . . . . . . . . . . . . . . .79, 81Loctite® Fixmaster® Wet Surface Repair Putty . . . . . . . . . . . . .79, 81Loctite® Flange Sealants . . . . . . . . . . . . . . . . .34, 35, 36, 37, 84, 86Loctite® Flange Sealants, Fast Curing . . . . . . . . . . . . . . . . . . .34, 35Loctite® Flange Sealants, Flexible . . . . . . . . . .34, 35, 36, 37, 84, 86Loctite® Flange Sealants, High Temperature . .34, 35, 36, 37, 84, 86Loctite® Flange Sealants, Large Gaps . . . . . . . . . . . . . . . . . . .34, 35Loctite® Flange Sealants, Medium Strength . . . . . . . . . . . . . . . . .35Loctite® Flashcure® Light Cure Adhesive . . . . . . . . . . .29, 31, 59, 60Loctite® Flood Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125Loctite® Fluid Waveform Analyzer, Signature Series . . . . . . . . . .119Loctite® Fluorescence Detector and Accessories . . . . . . . . . . . . .119Loctite® Food Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . .65, 66, 67Loctite® Food Grade Grease . . . . . . . . . . . . . . . . . . . . . . . . . .89, 91Loctite® Foot Pedal Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . .112Loctite® Form-A-Thread® Stripped Thread Repair Kit . . . . .104, 105Loctite® Gasket Eliminator® Flange Sealants . .34, 35, 36, 37, 84, 86Loctite® Gasket Sealant 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .84, 87Loctite® Gasket Sealant 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .84, 87Loctite® Gear, Chain and Cable Lubricant . . . . . . . . . . . . . . . .89, 91Loctite® Graphite-50™ Anti-Seize . . . . . . . . . . . . . . . . . . .65, 66, 67Loctite® Gravity Feed Reservoir, 4 Liter . . . . . . . . . . . . . . . . . . . .114Loctite® Grease Dispensers, Manual/Pneumatic/Cordless . . . . . .111Loctite® H.V.A.C. Blue Pipe Joint Compound . . . . . . . . . . . . . . . . .99Loctite® Hand Held Applicators . . . . . . . . . . . . . . .57, 106, 108, 115
Loctite® Hand Held Dispensing Valves . . . . . . . . . . . . . . . . . . . .115Loctite® Hand Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57, 106Loctite® Headliner Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63Loctite® Heavy Duty Anti-Seize . . . . . . . . . . . . . . . . . . . . .64, 66, 67Loctite® Heavy Duty Rubberized Undercoating . . . . . . . . . . . .76, 77Loctite® High Performance Silicone Gasket Maker . . . . . . . . .85, 87Loctite® High Temperature Gasket Maker . . . . . . . . . . . . . . . .86, 87Loctite® Hi-Tack Gasket Sealant . . . . . . . . . . . . . . . . . . . . . . .86, 87Loctite® Hot Melt Adhesives . . . . . . . . . . . . . . . . . . . .24, 25, 26, 27Loctite® Hot Melt Applicators . . . . . . . . . . . . . . . . . . . . . . . . . . .108Loctite® Hydraulic Jack Oil . . . . . . . . . . . . . . . . . . . . . . . . . . .89, 91Loctite® Hysol® CoolMelt™ Hot Melt Adhesive, EVA Based . . .25, 26Loctite® Hysol® Epoxy Adhesive . . . . . . . . . . . . . .16, 17, 18, 19, 21Loctite® Hysol® Epoxy Hardener, Excellent Adhesion .40, 42, 43, 44Loctite® Hysol® Epoxy Hardener, Fast Cure . . . . . . . . .40, 42, 43, 44Loctite® Hysol® Epoxy Hardener, General Purpose . . .40, 42, 43, 44Loctite® Hysol® Epoxy Hardener, Low Shrinkage . . . .40, 42, 43, 44Loctite® Hysol® Epoxy Potting Compound . . . . . . . . . . . . . . . .17, 19Loctite® Hysol® Epoxy Resin, Flame Retardant . . . . . . . . .40, 43, 44Loctite® Hysol® Epoxy Resin, General Purpose . . . . . . . . .40, 42, 44Loctite® Hysol® Epoxy Resin, High Temperature . . . . . . . .40, 42, 44Loctite® Hysol® Epoxy Resin, Thermally Conductive . . . . .40, 43, 44Loctite® Hysol® Hot Melt Adhesives . . . . . . . . . . . . . .24, 25, 26, 27Loctite® Hysol® Hot Melt Applicators . . . . . . . . . . . . . . . . . . . . . .108Loctite® Hysol® Medical Device Epoxy Adhesives . . . . . . . . . .59, 61Loctite® Hysol® Medical Device Urethane Adhesives . . . . . . . .59, 61Loctite® Hysol® Polyamide Hot Melt Adhesives . . . . . . . . .24, 27, 44Loctite® Hysol® Polyolefin Hot Melt Adhesives . . . . . . . . .24, 27, 44Loctite® Hysol® Polyurethane Hardener, Fast Cure . . . . . .40, 41, 44Loctite® Hysol® Polyurethane Hardener, Flame Retardant .40, 41, 44Loctite® Hysol® Polyurethane Resin, General Purpose . . .40, 41, 44Loctite® Hysol® Polyurethane, Gen. Purp. (Low Visc.) . . .40, 41, 44Loctite® Hysol® QuikPac™ Hot Melt Adhesive . . . . . . . . . . . . .25, 26Loctite® Hysol® Sprayable Polyamide Hot Melt Adh. . . . . . . . .24, 27Loctite® Hysol® SprayPac® . . . . . . . . . . . . . . . . . . . . .24, 25, 26, 27Loctite® Hysol® SprayPac® Hot Melt Adhesives . . . . . .24, 25, 26, 27Loctite® Hysol® SprayPac® Polyamide Hot Melt Adh. . . . . . . .24, 27Loctite® Hysol® SuperPac™ Hot Melt Adhesive, EVA Based . .25, 26Loctite® Hysol® Urethane Adhesives . . . . . . . . . . . . . . . . . . . .17, 20Loctite® Hysol® Urethane Hot Melt Adhesives . . . . . . . . . . . . .24, 27Loctite® Hysol® WaxPac™ Hot Melt Adhesive, EVA Based . . .25, 26Loctite® Hysol™ Hot Melt Applicators . . . . . . . . . . . . . . . . . . . . .108Loctite® Hysol™ Spray Applicators . . . . . . . . . . . . . . . . . . . . . . .108Loctite® Hysol™, Speedbonder™, Fixmaster® Adh. Dispenser . . .106Loctite® Industrial Hand Wipes . . . . . . . . . . . . . . . . . . . . .73, 74, 75Loctite® Industrial Strength Paint Stripper . . . . . . . . . . . .73, 74, 75Loctite® In-Line Flow Monitors and Accessories . . . . . . . . . . . . .119Loctite® Instant Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . .84, 86, 87Loctite® Integrated Semi-Automatic Controller . . . . . . . . . . . . . .114Loctite® LED Light Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123Loctite® Light Cure Adhesives . . . . . . . . . . . . . . . . . . .28, 29, 30, 31Loctite® Light Cure Dispense Valve . . . . . . . . . . . . . . . . . . .116, 117Loctite® Light Cure Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . .29, 31Loctite® Light Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129Loctite® Light Source and Power Supply . . . . . . . . . . . . . . . . . . .127Loctite® Luer-Lok Adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107Loctite® Maintain® Lubricant Penetrant . . . . . . . . . . . . . . . . . .89, 91Loctite® Maintenance Toolboxes . . . . . . . . . . . . . . . . . . . . .104, 105Loctite® Manual Cartridge Dispenser Gun . . . . . . . . . . . . . . . . . .106Loctite® Manual Hand Held Applicator . . . . . . . . . . . . . . . . . . . . .106Loctite® Manual Plunger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106Loctite® Marine Grade Anti-Seize . . . . . . . . . . . . . . . . . . .65, 66, 67Loctite® Maxi-Coat™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76, 77Loctite® Medical Device Epoxy Adhesives . . . . . . . . . . . . . . . .59, 61
DESCRIPTION PAGE NO. DESCRIPTION PAGE NO. DESCRIPTION PAGE NO.
BY
BR
AN
D/P
RO
DU
CT
NA
ME
IND
EX
149
Loctite® Medical Device Instant Adhesives . . . . . . . . . . . . . . .59, 61Loctite® Medical Device Light Cure Adhesives . . . . . .58, 59, 60, 61Loctite® Medical Device Silicone Adhesive . . . . . . . . . . . . . . .59, 61Loctite® Medical Device Urethane Adhesives . . . . . . . . . . . . .59, 61Loctite® Micro Needle Valve . . . . . . . . . . . . . . . . . . . . . . . .116, 117Loctite® Moly Dry Film Lubricant . . . . . . . . . . . . . . . . . . . . . .89, 91Loctite® Moly Paste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 66, 67Loctite® Moly-50™ Anti-Seize . . . . . . . . . . . . . . . . . . . . . .65, 66, 67Loctite® Monitoring Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . .119Loctite® Motion Control Disp. Systems, Dispensing Stations . . .121Loctite® Multi-Purpose Glass Cleaner . . . . . . . . . . . . . . . .73, 74, 75Loctite® N-1000™ High Purity Anti-Seize . . . . . . . . . . . . .65, 66, 67Loctite® N-5000™ High Perf. High Purity Anti-Seize . . . . .65, 66, 67Loctite® N-5000™ High Purity Anti-Seize . . . . . . . . . . . . .65, 66, 67Loctite® N-7000™ High Purity Anti-Seize . . . . . . . . . . . . .65, 66, 67Loctite® Narrow Spray Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . .109Loctite® Natural Blue® Cleaner & Degreaser . . . . . . . . . . .72, 74, 75Loctite® Needle Extension Nozzle . . . . . . . . . . . . . . . . . . . . . . . .109Loctite® Needle Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118Loctite® Nickel Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . .64, 66, 67Loctite® No More Leaks™, Plastic Pipe Sealant . . . . . . . . . . . . . . .99Loctite® Non-Chlorinated Parts Cleaner . . . . . . . . . . . . . . .72, 74, 75Loctite® Nordbak® Brushable Ceramic . . . . . . . . . . . . .101, 102, 103Loctite® Nordbak® Castable Wearing Compound . . . . .100, 102, 103Loctite® Nordbak® Ceramic Tile Adhesive . . . . . . . . . . . . . .102, 103Loctite® Nordbak® Chemical Resistant Coating . . . . . . . . . .102, 103Loctite® Nordbak® Combo Bead Wearing Compound .101, 102, 103Loctite® Nordbak® Fast Cure Pneu-Wear . . . . . . . . . . .101, 102, 103Loctite® Nordbak® Fast Cure Wearing Compound . . . .100, 102, 103Loctite® Nordbak® High Impact Wearing Compound . .100, 102, 103Loctite® Nordbak® High Temp. Wearing Compound . .100, 102, 103Loctite® Nordbak® High Temperature Brushable Ceramic . .102, 103Loctite® Nordbak® High Temperature Pneu-Wear . . . .101, 102, 103Loctite® Nordbak® Pneu-Wear . . . . . . . . . . . . . . . . . . .101, 102, 103Loctite® Nordbak® Ultra High Temp. Wearing Comp. .100, 102, 103Loctite® Nordbak® Ultra High Temp. Pneu-Wear . . . . .101, 102, 103Loctite® Nordbak® Wearing Compound . . . . . . . . . . . .100, 102, 103Loctite® Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107, 109Loctite® Nuva-Sil® Non-Slumping UV Acetoxy Silicone . . . . . . . . .31Loctite® Nuva-Sil® Silicone Potting Compounds . . . . . . . .29, 31, 45Loctite® ODC-Free Cleaner & Degreaser . . . . . . . . . . . . . .72, 74, 75Loctite® OptiLOC® Fiber Optic Adhesives . . . . . . . . . . . . . . . . .22, 23Loctite® O-Ring Making Kit . . . . . . . . . . . . . . . . . . . . . . . . .104, 105Loctite® Pencil Point Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . .109Loctite® Penetrating Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89, 91Loctite® Pipe Joint Compound . . . . . . . . . . . . . . . . . . . . . . . . . . .99Loctite® Pipe Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . .104, 105Loctite® Pneumatic Cartridge Dispenser . . . . . . . . . . . . . . . . . . . .57Loctite® Polyolefin Bonder . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9, 11Loctite® Poppet Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116, 117Loctite® Positive Displacement Pump . . . . . . . . . . . . . . . . .116, 117Loctite® Press-Pak™ 1000 Dispenser . . . . . . . . . . . . . . . . . . . . .112Loctite® Primer N™ . . . . . . . . . . . . . . . . . . . . . . . . . . .48, 49, 96, 97Loctite® Primer T™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48, 49, 97Loctite® Prism® Inst. Adh., Surface Insensitive Gel . . 13, 15, 59, 61Loctite® Prism® Instant Adh., Fast Cure/Surface Insensitive . .13, 15Loctite® Prism® Instant Adhesive, Low Odor/Low Bloom Gel . . .15Loctite® Prism® Instant Adhesive, Surface Insensitive . . . . . .13, 15Loctite® Prism® Instant Adhesive, Thermal Resistant . . . . . . .13, 15Loctite® Prism® Instant Adhesive, Toughened . . . . . . . . . . . . .12, 14Loctite® Prism® Instant Adhesive, Wicking Viscosity . . . . . . .13, 15Loctite® Prism® Instant Adhesives, Low Odor/Low Bloom . . .12, 14Loctite® Prism® Med. Dev. Inst Adh. . . . . . . . . . . . . . . . . . . . .59, 61Loctite® Prism® Medical Device Primer . . . . . . . . . . . . . . . . . . . . .61
Loctite® Prism® Primer Adhesion Promoter (Heptane) . . . . . .48, 49Loctite® Pro Lock™ Tight®, Multipurpose Anaerobic Gel . . .104, 105Loctite® Pro Strength Degreaser . . . . . . . . . . . . . . . . . . . .72, 74, 75Loctite® Pro Strength Parts Cleaner . . . . . . . . . . . . . . . . .72, 74, 75Loctite® Pro Strength Varnish Remover . . . . . . . . . . . . . .73, 74, 75Loctite® Procure™ Compression Gaskets . . . . . . . . . . . . . . . . . . .37Loctite® PST® Thread Sealants . . . . . . . . . . . . . . .54, 55, 56, 98, 99Loctite® Pump-A-Bead™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112Loctite® Pumps/Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . .116, 117Loctite® Quick Metal® Press Fit Repair . . . . . . . . . . . . . . .47, 94, 95Loctite® Quick Metal® Retaining Compounds . . . . . . . . . .47, 94, 95Loctite® Quick Service Tool Kit . . . . . . . . . . . . . . . . . . . . . .104, 105Loctite® Quick Set™ Instant Adhesive . . . . . . . . . . . . .12, 14, 62, 63Loctite® QuickStix™ 248™ Threadlocker, Med. Stgth/Remov. .96, 97Loctite® QuickStix™ 268™ Threadlocker, High Strength . . . . .96, 97Loctite® Quickstix™ 534™ Hi-Tack Gasket Dressing . . . . . . . .86, 87Loctite® Quickstix™ 548™ Gasket Eliminator® . . . . . . . . . . . . . . . .86Loctite® Quickstix™ 561™ PST® Pipe Sealant . . . . . . . . . . . . .98, 99Loctite® Quickstix™ 668™ Retaining Compound . . . . . . . . . . .94, 95Loctite® QuickStix™ C5-A® Copper Based Anti-Seize . . . .64, 66, 67Loctite® QuickStix™ Silver Grade Anti-Seize . . . . . . . . . . .64, 66, 67Loctite® Replacement 100 W Lamp/Reflector Module . . . . . . . . .124Loctite® Replacement 50 W Lamp/Reflector Module . . . . . . . . . .124Loctite® Replacement Adapter/Check-Valve for Nozzles . . . . . . .109Loctite® Retaining Compounds . . . . . . . . . . . . . . . . . .46, 47, 94, 95Loctite® Retaining Compounds, Controlled Strength . . . . . . . .46, 47Loctite® Retaining Compounds, General Purpose . . . .46, 47, 94, 95Loctite® Retaining Compounds, High Strength . . . . . . . . .46, 47, 95Loctite® Retaining Compounds, High Temperature . . .46, 47, 94, 95Loctite® Retaining Compounds, Maximum Strength . . . . . . . .46, 47Loctite® Retaining Compounds, Medium Strength . . . . . . . . .46, 47Loctite® Retaining Compounds, Oil Tolerant . . . . . . . . . . . . . .46, 47Loctite® Retaining Compounds, Rapid Cure . . . . . . . . . . . . . . . . .47Loctite® Retaining Compounds, Slow Cure . . . . . . . . . . . . . . .46, 47Loctite® Retaining Compounds, UV Cure . . . . . . . . . . . . . . . . . . .47Loctite® Robots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120Loctite® Roller, Assemblies and Replacements . . . . . . . . . . . . . .111Loctite® RTV Potting Compound . . . . . . . . . . . . . . . . . . . .29, 31, 45Loctite® SCARA Robot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120Loctite® Shot Miser™ Dispense Systems . . . . . .112, 114, 116, 117Loctite® Shot Miser™ Reservoir . . . . . . . . . . . . . . . . . . . . . . . . .114Loctite® Shot Miser™ Valve Controller . . . . . . . . . . . . . . . . . . . .114Loctite® Silicone Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . .89, 91Loctite® Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . .64, 66, 67Loctite® Single Channel Automatic Controller . . . . . . . . . . . . . . .114Loctite® Single Light Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124Loctite® Soft Squeeze Bottles . . . . . . . . . . . . . . . . . . . . . . . . . . .106Loctite® Solvo-Rust® Super Penetrating Oil . . . . . . . . . . . . . . .89, 91Loctite® Speedbonder™ Structural Adh., Fast Fixture . . .8, 9, 10, 11Loctite® Speedbonder™ Structural Adh., Plastic & Composite .9, 11Loctite® Speedbonder™ Structural Adhesives . . . . . . . . .8, 9, 10, 11Loctite® Speedbonder™ Structural Adhesives, Gen. Purpose . .9, 11Loctite® Speedbonder™ Structural Adhesives, High Impact . . .8, 10Loctite® Speedbonder™ Structural Adhesives, Metal Bonder . .8, 10Loctite® Speedbonder™ Structural Adhesives, Toughened . . . .9, 11Loctite® Speedbonder™ Structural Adhesives, Ultra Fast . . . . .9, 11Loctite® Spreader Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109Loctite® Stand, Heavy Duty Metal . . . . . . . . . . . . . . . . . . . . . . . .109Loctite® Static Mix Nozzles . . . . . . . . . . . . . . . . . . . . . . .79, 80, 107Loctite® Stationary Applicator Valve . . . . . . . . . . . . . . . . . .116, 117Loctite® Structural Adhesives, Severe Environment . . . . . . . . .8, 10Loctite® Super Bonder® Inst. Adh., Thermal Cycling Resist. . .13, 15Loctite® Super Bonder® Instant Adhesive . . . . . . . . . .12, 13, 14, 15Loctite® Superflex® Blue RTV, Silicone Adhesive Sealant . . . .85, 87
Loctite® Superflex® Non-Corrosive RTV . . . . . . . . . . . . . . . . .85, 87Loctite® Superflex® Red High Temp RTV . . . . . . . . . . . . . . . . .85, 87Loctite® Superflex® RTV, Silicone Adhesive Sealant . . . . . . . .85, 87Loctite® Syringe Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .113Loctite® Syringe Dispensing Systems . . . . . . . . . . . . . . . . . . . . .112Loctite® Tak Pak II® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . .49Loctite® Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . .48, 49Loctite® Tak Pak® Instant Adhesives . . . . . . . . . . . . . . . . . . . .12, 14Loctite® Thread Sealants . . . . . . . . . . . . . . . . . . . .54, 55, 56, 98, 99Loctite® Thread Sealants, Coarse Threads . . . . . . . . . . . . . . . .55, 56Loctite® Thread Sealants, Controlled Strength . . . . . .54, 56, 98, 99Loctite® Thread Sealants, Fine Threads . . . . . . . . . . . . . . . . . .54, 56Loctite® Thread Sealants, High Temperature . . . . . . . .55, 56, 98, 99Loctite® Thread Sealants, Hydraulic/Pneumatic Seal. .54, 56, 98, 99Loctite® Thread Sealants, Instant Seal . . . . . . . . . . . . . . . . . . .55, 56Loctite® Thread Sealants, Low Halogen/Low Sulfur . . . . . . . .55, 56Loctite® Thread Sealants, Low Strength . . . . . . . . . . . . . . . . .55, 56Loctite® Thread Sealants, PST® . . . . . . . . . . . . . . . . .55, 56, 98, 99Loctite® Thread Sealants, Refrigerant Sealant . . . . . . . . . . . . .54, 56Loctite® Thread Sealants, Slow Cure . . . . . . . . . . . . . . . . . . . .55, 56Loctite® Thread Sealing Cord . . . . . . . . . . . . . . . . . . . . . . . . .98, 99Loctite® Thread Sealing Stick . . . . . . . . . . . . . . . . . . . . . . . . .98, 99Loctite® Thread Sealing Tape with PTFE . . . . . . . . . . . . . . . . . . . .99Loctite® Threadlockers . . . . . . . . . . . . . . . . . . . . .50, 51, 52, 96, 97Loctite® Threadlockers, High Strength . . . . . . . . . . . . . . .50, 51, 52Loctite® Threadlockers, High Temperature . . . . . . . . . . . .50, 51, 52Loctite® Threadlockers, Large Threads . . . . . . . . . . . . . . .50, 51, 52Loctite® Threadlockers, Low Halogen/Low Sulfur . . . . . . . . . .51, 52Loctite® Threadlockers, Low Strength/Small Screw . .50, 52, 96, 97Loctite® Threadlockers, Medium Strength . . . . . . . . . .50, 52, 96, 97Loctite® Threadlockers, Oil Resistant . . . . . . . . . . . . . . . . . . .50, 52Loctite® Threadlockers, Primerless . . . . . . . . . . . . . . . . . . . . .51, 52Loctite® Threadlockers, Sticks . . . . . . . . . . . . . . . . . . . . . . . . .96, 97Loctite® Threadlockers, Wicking Grade . . . . . . . . . . . .51, 52, 96, 97Loctite® T-Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109Loctite® Tool Hanger/Balancer . . . . . . . . . . . . . . . . . . . . . . . . . . .109Loctite® Ultraviolet Glasses . . . . . . . . . . . . . . . . . . . . .123, 125, 127Loctite® Urethane Sealant . . . . . . . . . . . . . . . . . . . . . . . . . .104, 105Loctite® UV Wand Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124Loctite® Valves/Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . .116, 117Loctite® Vari-Drop™ Applicator . . . . . . . . . . . . . . . . . . . . . . . . . .115Loctite® ViperLube® Clear High Perf. Synthetic Grease . . .88, 90, 91Loctite® ViperLube® High Perf. Syn. Lub., Gear Oil . . . . . .88, 90, 91Loctite® ViperLube® High Perf. Syn. Lub., Ltwt. Oil . . . . .88, 90, 91Loctite® ViperLube® High Perf. Synthetic Grease . . . . . . .88, 90, 91Loctite® White Hi-Temp Anti-Seize . . . . . . . . . . . . . . . . . .65, 66, 67Loctite® White Lithium Grease . . . . . . . . . . . . . . . . . . . . . . . .89, 91Loctite® Zeta® 7021 Spot Radiometer . . . . . . . . . . . . . . . . . . . . .129Loctite® Zeta® 7215 High Intensity UV Chamber (Mercury Arc) .128Loctite® Zeta® 7401 UV Chamber . . . . . . . . . . . . . . . . . . . . . . . .128Loctite® Zeta® 7411-S UV Flood System . . . . . . . . . . . . . . . . . . .125Loctite® Zeta® 7415 Conveyor . . . . . . . . . . . . . . . . . . . . . . . . . . .126Loctite® Zeta® 7420 Visible Flood Systems . . . . . . . . . . . . . . . . .125Loctite® Zeta® 7500 UV System . . . . . . . . . . . . . . . . . . . . . . . . . .125Loctite® Zeta® 7600 UV Conveyor . . . . . . . . . . . . . . . . . . . . . . . .126Loctite® Zeta® 7735 UV Wand System . . . . . . . . . . . . . . . . . . . . .124Loctite® Zeta® 7740 UV Wand System . . . . . . . . . . . . . . . . . . . . .124Loctite® Zeta® 7750 Programmable UV Wand System . . . . . . . .124Loctite® Zinc Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . .65, 66, 67
DESCRIPTION PAGE NO. DESCRIPTION PAGE NO. DESCRIPTION PAGE NO.
ww
w.loctite.com
The Adhesive SourcebookVolum
e 5
Except as otherwise noted, all trademarks in this catalog are trademarks of Henkel Corporation in the U.S. and elsewhere.
® denotes a trademark registered in the U.S. Patent and Trademark Office.
Krytox is a registered trademark of E.I. DuPont de Nemours Co., Inc.
NSF is a trademark of NSF International.
CSA is a trademark of CSA International.
UL is a trademark of Underwriter’s Laboratories, Inc.
© Copyright 2005. Henkel Corporation. All rights reserved.
Printed in U.S.A.
2443/LT-3355 12/04
Material Safety Data Sheets andTechnical Data Sheets also available by 24-hour fax. In the U.S.A., 1.800.LOCTITE (562.8483).In Canada, 1.800.263.5043.
For information on ManufacturingReliability Training call: 1.800.LOCTITE (562.8483) (U.S.A.)1.800.263.5043 (Canada)
Loctite® brand productsfor design, assembly,manufacturing, andmaintenance
USAFor your local Loctite® brand Adhesives and Sealants Specialist, call:1.800.323.5106
For your nearest authorized Loctite® branddistributor, to arrange an in-plant seminar orfor technical product assistance, call:1.800.LOCTITE (1.800.562.8483)
To place an order, call:1.800.243.4874
Henkel Corporation1001 Trout Brook CrossingRocky Hill, Connecticut 06067 860.571.5100Fax: 860.571.5465
CanadaFor your local Loctite® brand Adhesives and Sealants Specialist, for your nearestauthorized Loctite® brand distributor, toarrange an in-plant seminar, for technicalproduct assistance or to place an order, call:1.800.263.5043 (within Canada)
Henkel Canada Corporation2225 Meadowpine Blvd.Mississauga, Ontario L5N 7P2Tel: 905.814.6511Fax: 905.814.53911.800.263.5043 (within Canada)
MexicoFor your local Loctite® brand Adhesives and Sealants Specialist, for your nearestauthorized Loctite® brand distributor, toarrange an in-plant seminar or for technicalproduct assistance, call:01.800.90.181.00 (within Mexico)
To place an order, call:01.800.84.994.12 (within Mexico)
Henkel Capital, S.A. de C.V.Calzada de la Viga s/n Fracc. Los LaurelesLoc. Tulpetlac, C.P. 55090Ecatepec de Morelos, Edo. de MéxicoTel: 011.52.55.5836.1300Fax: 011.52.55.5787.9004
Central AmericaFor your local Loctite® brand Adhesives and Sealants Specialist, for your nearestauthorized Loctite® brand distributor, toarrange an in-plant seminar, for technicalproduct assistance or to place an order, call:506.277.4868
Henkel Costa Rica Ltda.San Joaquin de FloresHeredía, Costa RicaTel: 506.277.4800Fax: 506.277.4883
South AmericaFor your local Loctite® brand Adhesives and Sealants Specialist, for your nearest authorizedLoctite® brand distributor, to arrange an in-plantseminar, for technical product assistance or toplace an order, contact:
Henkel Ltda.Rua Karl Huller, 136 – Jd.Canhema 09941-410 Diadema/SP, BrazilTel: 55.11.4075.8955Fax: 55.11.4075.88870800.12.23.34 (within Brazil)
Henkel Argentina S.A. Tte. Cnel. Magán 1990 – Sarandi(B1872HRN) Avellanda, Buenos Aires, ArgentinaTel: 54.11.4001.0100Fax: 54.11.4205.34420800.33.30213 (within Argentina)
Henkel Chile Ltda.Av. Apoquindo 3355, Oficina 8 – 1º PisoLas Condes, Santiago, ChileTel: 56.2.2333606Fax: 56.2.2341448800.212002 (within Chile)
Henkel Colombiana S.A. Calle 17 No. 68-B-73, Bogotá D.C., ColombiaTel: 571.423.9000Fax: 571.425.133101.800.01.14173 (within Colombia)
Henkel Venezolana S.A. Zona Industrial PruincaCalle 2 Parcela 31 y 32 Guacara – Edo Carabobo, VenezuelaTel: 5824.5560.2611Fax: 5824.5560.26600800.436.5300 (within Venezuela)