Lenox® Lockers
bradleycorp.com
Bench Lockers
Cubby Lockers
Gear Lockers
Lenox® Lockers
Pedestal Benches
Z-Lockers
ResiLient foR the Long hauLUnlike metal, Lenox Lockers are constructed
from corrosion-proof, high-density polyethylene material that won’t rust or dent. • More resistant to scratches • Easier to repair than metal Lenox Lockers are now available in
100% post-consumer recycled material. • Four colors offered in the new material • Made completely from recycled milk jugs
• Provides the same performance requirements as the current plastic and the same 20-year warranty (See chart at right for available colors.)
Lenox® LockersPractical. Preferred. Plastic.
Metal doesn’t stand a chance.
Quick installation and low maintenance costs can add up to a 50% life cycle cost savings with Lenox® Lockers — the preferred specification in locker rooms all over the country.
• Fully-assembled product• Backed by a 20-year warranty• Made from 30% pre-consumer recycled content
“Because of the unique layout and conditions of our facility, we needed a product that was very strong and durable. The lockers have complemented our atmosphere and withstood the high usage we encounter year-round.”
- Water Park Manager, Outdoor World
“The low maintenance, durability and no-rust factor make Lenox the #1 choice in lockers, especially in wet room areas. We highly recommend these lockers for any institution.”
- Director of Residential Life-Facilities Illinois State University
“Lenox Lockers have enhanced our school appearance and have provided a solution for our students’ storage needs. In addition, they look as new as the day they were installed—evidence of their durability in a high school setting!”
- Director of Instruction Scranton State School for the Deaf
“Our maintenance department is very pleased that the lockers cannot be kicked shut, which usually results in many broken locker latches. They also appreciate the ease with which the locker surfaces can be cleaned.”
- School Superintendent Westchester Public Schools
foRget about MaintenanceNever paint a locker again! You get maintenance-free lockers that still look new after years of use. Even spray paint and magic markers are easily removed with standard cleaning products. All plastic locker parts and components carry a 20-year warranty against rust, corrosion, denting and delaminating under normal use.
econoMic advantage: Lenox LockeRs vs. MetaL LockeRsPlastic lockers may require an additional investment up front, but savings on repairs and maintenance will make up the difference over the locker’s 20-year life cycle.
MetaL LockeR PLastic LockeR
Painting
(4 times) $100 per locker $0
Door Replacement
(2 times) $110 per locker $0
Cost
(100 Lockers) $21,000 $0
Maintaining 100 metal lockers for 20 years with four paint jobs and two door replacements per locker would cost $21,000!
cubby LockeRsThe easy-access, durable cubby locker is perfect for items that do not require locked storage. • Shipped fully assembled • Reduce installation costs by up to 50% (Three cubby lockers pictured.)
bench LockeRsLenox bench lockers provide convenient seating in the locker room. • Secure storage beneath bench • Doors attached to frames with full-length, heavy-duty stainless steel hinges powder-coated to match locker colors
PedestaL benchLocker room benches complete the long line of solid plastic products for your restroom and locker room applications. • 1 1/2" high-density polyethylene (HDPE) • Available in 14 standard colors • Black anodized aluminum pedestal • 18 1/2" ADA-compliant height
cubby bench LockeRConvenient seating and easy-access storage in one! • Space-saving solution • Available in 12 colors • Shipped fully assembled
Pocket LockA portable security solution for shared locker environments, such as amusement or water parks, where patrons pay each time they want to secure their belongings. • Rent the lock once and it travels from locker to locker • 500 different key combinations
*Also available in 100% post-consumer (PoC) recycled content. Post-consumer and co-extruded colors available at an additional charge.**Also available in 100% pre-consumer (PrC) recycled content.
D Due to printing variances, the actual material color may differ. Contact your local Bradley Representative for samples.Available ColorsD
co-extruded colors
Blue/White/Blue M233
Brown/White/Brown M234
Green/Beige/Green M232
Red/White/Red M231
Beige* S202
100% PoC M250
Black** S205
100% PrC R205
Burgundy S211
Buttermilk M226
Canyon Granite M244
Charcoal Gray* S215
100% PoC M248
Deep Blue S203
Desert Stone S406
Dove Stone S400
Gray S200
Moss* M228
100% PoC M249
Red S214
Spice M240
Starry Night S225
Teal S210
Toffee* M227
100% PoC M247
White S201
Plum M241
Sky Blue M237
Hunter M239
Linen M242
Bronze M243
Z-LockeRsPerfect for health clubs, YMCAs, spas and aquatic and fitness centers. • Design provides practical multi-level storage for overcoats, suits, dresses and other hanging articles • No wasted floor space
neW!
Lenox geaR LockeRsSecure your gear! Lenox Gear Lockers are wider and deeper than the standard 18" x 18" lockers, creating more space for gear such as large gym bags, pads and helmets. Lockers ship fully assembled for quick, easy installation. Perfect for fire and police departments, locker rooms, and recreation and fitness facilities.
STaNDaRD HeIGHT: 72” High
WIDTH OPTIONS: 24”, 30” or 36”
DePTH OPTIONS: 18”, 21” or 24”
ReCyCLeD MaTeRIaL: 30% Pre-Industrial
Content or 100% Post- Consumer Content
neW!
800.BRaDLey bradleycorp.com
W142 N9101 Fountain Boulevard
Menomonee Falls, WI 53051
3787-5-0210DL
one-Piece constRuction Reduces instaLLation costFormed by a polymer resin, Lenox components are one solid piece—no edges to come apart, no core to delaminate and no exposed fasteners. With a box panel thickness of 3/8" and door and frame thickness of 1/2", Lenox Lockers withstand impacts that would easily damage metal lockers. The durable, wrap-around box design is shipped fully assembled, so there’s no added time or expense required to piece together countless components.
excLusive featuRes• Continuous slide latch runs the entire length of the door
• Heavy-duty stainless steel piano hinge is more durable than aluminum or plastic
• Ergonomically-designed handle with concealed metal hasp
• Top and bottom are welded to frame plus door and frame assembly is welded to box
Made-to-oRdeR oPtions• Built-in key locks
• Built-in combination locks
• Coin-operated locks
• Card-operated locks
• Keypad locks
• Pocket locks neW!
• Combination padlocks
• End panels
• Filler panels
• Bases
• Slope tops
• Flat tops
• Mesh doors
• Engraved logos
• Number plates
• Plastic coat hooks
• Metal wall hooks
• Drain holes
• Plastic mirrors
Continuous slide latchmade of ½" thickHigh-Density Polyethylene(HDPE) secures entirelength of door.
standaRd LockeRs Z-LockeRs
height* 24", 36", 48", 60", 72" 60", 72"
Width 12", 15", 18" 15", 18"
dePth 12", 15", 18" 12", 15", 18"
tieRs* 1- 6 2
Built-in key lock Built-in combination lock
Coin-operated lock*See technical data at bradley.com for height/tier combinations available.
United States Patent No.: 6,685,285; 6,792,661; 6,793,299; 7,029,078; 7,223,317; 7,278,695; 7,510,249
Printed on recycled paper.