LeakTestingandSpecialApplicationforassemblylines
4
Leak Testing
A modern manufacturing line is designed todeliver a final product with high reliability andalways increasing performances. The leak test-ing is now implemented as one of the methodsfor process monitoring and quality control: anaccurate leak test can surely grant the productquality in terms of reliability, performances andsafety.
Leak testing is used in-line in the machiningprocess and/or at assembly stage.
MG after having acquired the company TRACE(market leader with over 350 systems installedin France and specialized in helium applica-tions), becomes the right partner able to pro-vide leak test stations to be used in the machin-ing process and/or at assembly stage.
MG and TRACE are actually able to supply leaktesting stations tailored to the Customer’sneeds:
• Automatic machines with roller/palletconveyors as well as gantry loader(suitable for in-line applications)
• Automatic machines with robot automa-tion(suitable for assembly line integration)
• Machines with rotary table(suitable to speed-up the loading/unloading operations)
• Machines with automatic sealing toolsexchange(flexible for different part families)
• Machines with “sealing tools carriage”(easily and quickly re-toolable for differentpart families)
• Manual stations for final inspection oras back-up station for repair loops
• Integrated applications (multi stations)for assembly lines(assembly + leak test + dimensional inspection)
• Tracer gas vacuum chambers(high performances for very little leaks)
• Tracer gas sniffing stations(suitable for leaks localization)
Leak Testing
5
Few reasons to perform the leak testing
• Ensure integrity of checked parts• Ensure good functionality• Avoid contamination problems• Reduce reworking• Reduce production costs• Total quality assurance of the parts
Where and how leaks occur:
after casting
• Porosity• Flaws/cracks
after machining
• Machining errors• Part defects
after assembling
• Missing seals• Defective seals• Wrong positioning• Wrong assembling
Leak testing techniques
• Part pressurization and/or water dunk• Pressure decay measurement:
- by relative transducer- by differential transducer
• Flow measurement• Mass Spectrometer for helium
Typical checks
• Oil circuit leakage• Water circuit leakage• Fuel circuit leakage• Gasket leakage• Fluid circuit integrity
Typical part for which the leak test is required
• Engine block• Cylinder head• Gear case• Differential case• Crankshaft & camshaft• Oil, water and fuel pumps• Manifolds• Valves• Brake components• Gas components• Others
Leak TestingExamples of installed applications
6
Leak test machine for engine block water,low pressure and high pressure oil circuit
• Gantry loader solution• Two different part types (4 cylinders)• Automatic retooling of sealing assemblies• Test pressure 1,5/0,6 bar• Twin station machine for cycle time constraint
In-line automatic machine for enginehead water circuit, fuel circuit and oilcircuit
• Roller conveyor solution• Three different part types (6 cylinders)• Automatic retooling of sealing assemblies• Test pressure 1,5 bar
Oil, water, injection circuit leak teststation for assembled engine and fillingoil station
• Pallet conveyor solution• Two engine models• Two stations• Flow measures and decay measure
In-line automatic machine for engineblock water jacket
• Roller conveyor solution• Three different part types (6 cylinders)• Automatic retooling of sealing assemblies• Test pressure 1,5 bar
Leak TestingExamples of installed applications
7
In-line automatic machine for engineheads front seal
• Roller conveyor solution• Relative vacuum test• Camshaft turning torque checking• Part repair bays
In-line automatic machine forauxiliary gears assembly oil circuit
• Roller conveyor solution• Working island with pallet line• Different part typologies• Oil circuit leak test and shaft turning
torque checking
Engine block front seal leak teststation
• Pallet conveyor solution• In-line vacuum test with part conveyed
on pallet• Measure result recorded on radio
frequency identification (RFID) system
8-16V cylinder valve leak test station
• Roller conveyor solution• Heads assembly line• Two stations for the two different heads• Flow measure
Leak TestingExamples of installed applications
8
Assembly and leak test machine for4 and 5 cylinder engine heads
1^ station
• Oil circuit leak test• Oil circuit continuity test
2^ station
• Oil plug screw-driving• Oil praying plug screw-driving
3^ station
• Water circuit leak test• Oil plug leak test
Automatic machine for four cylinderengine block circuit
• Oil circuit leak test• Two stations, each dedicated to a part
typology• Loading and unloading by gantry• Part translation by lift and carry beam• Hydraulically powered
Leak TestingExamples of installed applications
9
Four cylinder engine block waterjacket and oil plug leak test station(integrated into the final measuringmachine)
• Pallet conveyor solution• Water jacket leak test• Two stations, each dedicated to a part
typology
Oil pump body leak test
• Robot handled solution• Oil pump body leak test
Revolving table machine, manualload/unload, for leak test of engineheads after cubing
1^ station• Part station• Deck face water circuit holes presence
check2^ station• Water circuit leak test• Good part marking
Valve leak test
• Valve run-in and test for 16 valve engineheads
Leak TestingExamples of installed applications
10
Engine block front seal and oil plugsleak test station
• Long block• Vacuum test
Engine block rear seal leaktest station
• Engine block rear seal leak teststation
• Thread hub screwing
Engine block leak test
• Water jacket leak test• Dunk tank for locating leak by
rolling part
Leak test with air and part dunk
• Leak test with air• Part dunk and repairing station for
truck and tractor engine blocks
Leak TestingExamples of installed applications
11
Power steering gear body leak test
• Manual load/unload• Leak test• Dunk tank lifting for locating leak• Part marking
V6 engone block front oil sealleak test
• Vacuum test• Fixture is hung above the line
Cam carrier oil circuit leak test
• 4 cylinder cam carrier• Manual load/unload
Assembly station and leak testmachine for 4 and 5 cylinder heads
• Repair station
Leak TestingExamples of installed applications
12
Leak test machine for engine blockwater, oil low pressure andhigh pressure circuits
• Robot handled solution• Machines with revolving table (high speed)• Two part families • 1500 pcs/day• About 30 machines of this model installed
Leak test machine for cylinder headwater and high pressure oil circuits
• Robot handled solution• Different part families • Re-toolable solution• 1200 pcs/day• About 15 machines of this model installed
Leak test machine for cylinder headcover high pressure oil circuit
• Robot handled solution• Two part families• Manual loading at front side
Leak test machine for cylinder headand camshaft cover water, low andhigh pressure oil circuits
• Robot handled solution• 1250 pcs/day• 7 machines on this model installed
Leak TestingExamples of installed applications
13
Leak test machine for assembledengine water and oil circuits
• Pallet conveyor solution• Two part families• 2000 pcs/day
Leak test machine for engine block
• Pallet conveyor solution
Machines with robot automation(assembly line integration)
• Area with one robot anc 2 testmachines for 2500 pcs/day
Machines with robot automation(assembly line integration)
• Robotized area with 2 leak testmachines and sorted accumulation for2500 pcs/day
Helium test Applications
14
Leak test cylinder head directinjection fuel circuit
• Robot handled solution• Vacuum chamber solution with tracer
gas• High performance (high resolution)• Twin station machine for cycle time
constraint
Helium leak test back-up station(sniffing method)
Leak test for cylinder head directinjection fuel circuit
• Pallet conveyor solution• Sniffing cycle with tracer gas for leak
localization• Robot handled sniffing cycle• High performance (high resolution)• Twin station machine for cycle time
constraint
Leak test for cylinder head directinjection fuel circuit
• Robot handled solution• Vacuum chamber solution• High performance (high resolution)
Special Applicationfor assembly lines
15
Machine for oil filling (N° 4 machines already installed)
• Automatic gear assembly line• Cycle time: 94 sec
Oil suction automatic station afterhot test machine
• Automatic engine assembly line• Cycle time: 54 sec
Cylinder head cam shaft front ringseal assembly station
• Automatic engine assembly line• Cycle time: 40 sec
Assembly station for caps pressfitting and screw-driving with capsfeeding units
Special Applicationfor assembly lines
16
Automatic assembly area for cylinderblock cap press fitting (2 stations) andleak test station (water, low pressureand high pressure oil circuit)
Crankshaft oil gallery flowinspection machine
• Cycle time: 18 sec
Automatic dimensional inspectionstation in automatic gear boxassembly line
• Cycle time: 22 sec
Automatic dimensional inspectionstation in automatic gear boxassembly line
• Cycle time: 22 sec
Special Applicationfor assembly lines
17
16V camcarrier screw driving andfront seal leak test station
• 16V head assembly line• Fly-roller conveyor• Relative vacuum test
Multi station machine for freeze capspress fitting, oil plug screw driving andoil and water circuits leak test for 4cylinder engine head
1^ station
• Main oil channel oil plugs screw driving• Loctite spraying on freeze cap seat• Freeze cap press fitting• Screw-driving assembly moved by CNC slides• Thread oil plugs and freeze caps fed by
pneumatic shot units
2^ station
• Oil plugs screw-driving for tightening oil cir-cuit
• Loctite spraying on freeze cap seat• Freeze cap press fitting• Screw-driving assembly moved by CNC slides• Thread oil plugs and freeze caps fed by
pneumatic shot units
3^ station
• Water circuit leak test• Low pressure oil circuit leak test
Instruments
18
LTE – Delta S
It’s a reliable and easy to use instrument forleak detection.It’s based on the pressure decay technology.
Up to 16 resident measuring programs.Standard pressure ranges = +1 Bar + 6 Barrelative (special on request).RS 232 serial interface for data collection.Calibration report.
Delta 1S absolute measure. Available versionwith automatic or manual pressure regulator.
Delta 3S differential measure related to a ref-erence volume. With relative pressure trans-ducer for test pressure and a differentialtransducer for leak testing.
Dimension Top Bench version: mm 320(w)x175(h)x440(d)Weight: 12 Kg
E9066 - WINATE
It’s a reliable instrument for leak detection bypressure decay.It’s based on the MG industrial E9066.The instrument is equipped with a full size key-board and optionally with a bar code reader .Software function for set of all the test param-eters.Statistical analysis.Data Backup and restore.Data transfer to LAN (optional).
Dimension Top Bench version: mm 540(w)x500(h)x400(d)Weight: 40 Kg
TRACE 5
It’s a reliable and high performing instrumentfor leak detection.It’s based on the pressure decay technology Measure display in cc/mm or mbar.Resolution 0,07 Pa.Cycle time reduction Improve measure accuracy and repeatability Slightly affected by temperature changeUp to 127 resident measuring programs.RS 232 serial interface for data collection.
Dimension Top Bench version mm 600(w)x250(h)x170(d)Weight: 20 Kg