Indice Index
Pag.4
IRC S.p.A. - Una realtà Italiana apprezzata in tutto il mondo
IRC S.p.A. - An Italian company esteemed around the world
Pag.5
Certificazioni
Certifications
Pag.7
Processo produttivo
Manufacturing process
Pag.17
Dati tecnici
Technical data
Pag.18
Materiali e caratteristiche chimiche
Materials and chemical properties
Pag.23
Tee uguali e ridotti
Equal and reducing tees
Pag.39
Tee barrati
Barred Tees
Pag.43
Tee laterali
Lateral tees
Pag.47
Riduzioni concentriche ed eccentriche
Concentric and eccentric reducers
Pag.59
Croci
Crosses
Pag.63
Fondelli ASME
ASME Caps
Pag.67
Curve ASME
ASME Elbows
Pag.83
Curve EN/DIN/ISO
EN/DIN/ISO Elbows and Bends
IRC S.p.A. - Una realtà italiana apprezzata in tutto il mondo IRC S.p.A. - An Italian company esteemed around the world
Dalla sua fondazione - nel 1971 - IRC S.p.A. si è sviluppata fino a diventare una delle maggiori aziende nel settore della produzione di raccorderia a saldare di testa, conosciuta ed apprezzata in tutto il mondo. L’elemento cardine che ci ha portato ad essere considerati una delle maggiori aziende del settore è essenzialmente uno, ovvero la dedizione al nostro mestiere. Da 40 anni crediamo che il nostro lavoro quotidiano debba essere messo al servizio dei nostri clienti, siano essi grandi aziende riconosciute a livello internazionale o piccole realtà imprenditoriali. Per questo abbiamo adottato una politica del lavoro estremamente versatile, in grado di gestire sia grandi progetti di produzioni speciali che piccole commesse di prodotti immediatamente prelevabili dai nostri magazzini. Siamo perciò orgogliosi di avere raggiunto un’eccellenza unica nel nostro settore: possiamo affermare che la costante ricerca di miglioramento tecnologico, gestionale e qualitativo - supportati da un sistema informatico sempre aggiornato e all’avanguardia, ci ha permesso di vantare un comparto produttivo flessibile ed un magazzino capiente e sempre rifornito di prodotti dal ½” al 48” in diversi spessori e gradi di materiale. Il raggiungimento di questi obiettivi è andato di pari passo con l’ampliamento della nostra area che, dagli originari 7.000 mq, si estende attualmente per circa 50.000 mq di cui 20.000 coperti. Competenza, assistenza e qualità: i cardini del nostro lavoro al vostro servizio da 40 anni.
Since its founding in 1971 - IRC S.p.A. has evolved to become one of the largest companies in the manufacture of weld head fittings, recognized and appreciated around the globe. The distinguishing factor that made us one of the most important companies in this sector is essentially one, our intense dedication to our work. For 40 years we have believed that our daily work must be at the total service of our clients, most of which are large companies recognized at an international level or smaller entrepre-neurial businesses. For this reason we have adopted an extremely versatile working strategy, able to manage both large special production projects as well as smaller orders of immediately available products from our warehouses. We are therefore proud to have reached the apex of excel-lence in our sector: constant research and technological, managerial and qualitative improvement – supported by a continuously updated avant-garde information tech-nologies system, have allowed us to create a flexible pro-duction department and a vast warehouse always stocked with products from ½” al 48” in diverse depths and mate-rial grades. The obtainment of these objectives has devel-oped in unison with the expansion of our facilities, which from the original 7,000 m² now extend to approximately 50,000 m², of which 20,000 are covered. Competence, assistance and quality: the driving forces of our work, at your complete service for 40 years.
IT
EN
Depuis sa fondation en 1971, IRC S.p.A. s’est développée jusqu’à devenir une des principales entreprises dans le secteur de la production de raccorderie à souder bout à bout, connue et appréciée dans le monde entier. L’élément clé qui nous a permis d’être considérés comme étant l’une des principales entreprises du secteur est essentielle-ment le dévouement envers notre métier. Depuis 40 ans, nous croyons que notre travail quotidien doit être mis au service de nos clients, ces derniers étant aussi bien de grandes entreprises reconnues au niveau international que de petites réalités entrepreneuriales. C’est pour cette raison que nous avons adopté une politique de travail extrêmement versatile, en mesure de gérer tant les grands projets de production spéciale que les petites commandes de produits pouvant être immédiatement retirés de nos entrepôts. Nous sommes donc fiers d’avoir atteint un niveau d’excellence unique dans notre secteur. Nous pou-vons affirmer que la recherche constante d’amélioration de la technologie, de la gestion et de la qualité, soutenue par un système informatique constamment mis à jour et toujours à l’avant-garde, nous a permis de bénéficier d’un service de production flexible et d’un entrepôt de grande capacité, qui est toujours réapprovisionné en produits de ½ po jusqu’à 48 po, de différentes épaisseurs et différents degrés de matériel. La réalisation de ces objectifs est allée de pair avec l’agrandissement de la superficie de nos établissements, à l’origine de 7000 m², et qui s’étend actu-ellement à environ 50000 m², dont 20000 sont couverts. Compétence, assistance et qualité sont les éléments-clés de notre travail, à votre service depuis 40 ans.
FR
4
Certificazioni Certifications
Certificazione di qualità / Quality certificationLa certificazione della raccorderia è conforme a tutti i requisiti della norma EN 10204:2004 3.1 e dell’allegato I par. 4.3 della direttiva PED 97/23/CE. The certification of fittings complies with the requirements of EN 10204:2004 3.1 and annex I par.4.3 PED 97/23/EC.
Standard di produzione / Manufacturing standard• ASME B 16.9 - ASME B 16.25• DIN 2605 - 2615 - 2616 - 2617• MSS - SP 25• AFNOR NFA 49 - 281• MSS - SP 75Specifiche dei materiali / Material specifications• ASME/ASTM SA/A 234 WPB - WP 11 - WP 22 - WP 9 - WP 91 - WP 5 - WP 12• ASME/ASTM SA/A 420 WPL 6• ASTM A 860 - WPHY 42 - WPHY 52 - WPHY 60 - WPHY 65 - WPHY 70• MSS - SP 75 WPHY 42 - WPHY 52 - WPHY 60 - WPHY 65 - WPHY 70• NACE MR0175 - NACE MR0103 - NACE MR0175 / ISO15156• EN 10253 - 2 P235GH / P265GH• DIN 2609 - ST 35.8 / ST 37.0 W• AE 250 B NFA 49 - 281• A 42 CP NFA 36 - 205• AE 220 A NFA 49 - 281
Controllo dei materiali / Material inspectionsLa qualità della raccorderia è inoltre garantita mediante una serie di test e controlli che vengono effettuati sul prodotto finale. The fitting quality is also guaranteed by a series of tests and inspections which are performed on the final product.
Analisi chimica dei prodotti / Chemical product analysisTest meccanici in accordo con ASTM/ASME A/SA370.Controlli non distruttivi (VT, LP, MT, RT, UT) in accordo con ASME V, effettuati da personale qualificato ai sensi di ASNT-TC-1A EN473 / ISO9712.Controlli delle saldature longitudinali dei fitting, in accordo alla norma ASME V articolo IV appendice V, con ultrasuoni utilizzando tecnologia phased-array (sectorial scan) e TOFD (time of flight diffraction) con scanner semiautomatici che permettono la registrazione delle saldature e la successiva analisi.Mechanical testing according to ASTM/ASME A/SA370.Non Destructive Examination (VT, LP, MT, RT, UT) according to ASME V, performed by qualified personnel as per ASNT-TC-1A EN473 / ISO9712.Fitting longitudinal welds examination according with ASME V Article IV, Appendix V performing with ultrasonic phased-array technology (sectorial scan) and TOFD (time of flight diffraction) with semi-automatic scanners that allow the recording and the analysis of the welds data.
IT / EN
5
Dati tecnici Technical data
I.R.C. SpA produce raccordi a saldare di testa sia saldati che senza saldatura, i cui utilizzi spaziano nei settori petrolifero, gas, navale, energetico e chimico adatti per impianti a basse, medie ed alte temperature.
La produzione dei nostri raccordi segue gli standard ASME ed EN, impiegati nei più diffusi codici di progetto.
IRC S.P.A. offers both seamless and welded steel fittings used in pressure piping and in pressure vessel fabrication for service at low, moderate and elevate temperatures.
The following examples are indicative of the code that affect material selection.
• ASME B31.1 - POWER PIPING
• ASME B31.3 - PROCESS PIPING
• ASME B31.4 - LIQUID & SLURRY PIPING TRANSPORTATION SYSTEM
• ASME B31.8 - GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
• ASME SECTION VIII DIV.1 / ASME SECTION VIII DIV.2
• EN 13480 - METALLIC INDUSTRIAL PIPING
• EN 13445 - UNFIRED PRESSURE VESSELS
IT / EN
17
Materiali e caratteristiche chimiche Materials and chemical properties
18
STEEL GRADE
WPBabc
WPCabc
WPL6
WP1WP12 CL1WP12 CL2WP11 CL1WP11 CL2WP11 CL3WP22 CL1WP22 CL3WP5 CL1WP5 CL3WP9 CL1WP9 CL3
WP91WPHY 42WPHY 46WPHY 52WPHY 60WPHY 65WPHY 70WPHY 42WPHY 46WPHY 52WPHY 60WPHY 65WPHY 70
C
0,30
0,35
0,30 0,035
0,045 0,0450,045 0,60
0,60
0,500,500,500,501,001,00
0,500,500,500,500,500,50
0,0450,030,040,040,040,040,030,030,030,030,01 0,40 0,06 0,02 0,01 0,01
0,50 0,35 0,10 0,04 0,06 0,050,050,050,050,050,050,050,050,050,050,050,05
0,060,060,060,060,06
0,040,040,040,040,040,100,100,100,100,100,10
0,100,100,100,100,100,130,130,130,130,130,13
0,350,350,350,350,350,500,500,500,500,500,50
0,500,500,500,500,500,500,500,500,500,500,50
0,01 0,30 0,250,30 0,250,30 0,250,30 0,250,30 0,250,30 0,250,25 0,250,25 0,250,25 0,250,25 0,250,25 0,250,25 0,25
0,010,010,010,010,01
0,0450,0450,030,040,040,040,040,040,040,030,03
0,030,030,030,030,030,030,035 0,0350,035 0,0350,035 0,0350,035 0,0350,035 0,0350,035 0,035
0,02
0,04 0,30 0,12 0,40 0,40
— — — — — — —— — — — — —— — — — — —— — — — — —— — — — — —— — — — — —— — — — — —— — — — — —— — — — — —— — — — — —— — — — — —— — —
— —— —— —— —— —— —— ——
—————
— —— —— —— —— —
— — —
————————————
0,08 0,02
0,28
0,150,150,150,15
0,200,200,200,200,200,200,30 1,60
1,601,601,601,601,60
0,300,300,300,300,30
0,05 ÷ 0,20
0,10 ÷ 0,50
0,44 ÷ 0,65 0,44 ÷ 0,65 0,44 ÷ 0,65 0,44 ÷ 0,65 0,44 ÷ 0,65 0,44 ÷ 0,65
0,44 ÷ 0,65 0,44 ÷ 0,65 0,90 ÷ 1,10 0,90 ÷ 1,10 0,85 ÷ 1,05
0,18 ÷ 0,25
0,03 ÷ 0,07
0,87 ÷ 1,13 0,87 ÷ 1,13
0,80 ÷ 1,25 0,80 ÷ 1,25 1,00 ÷ 1,50 1,00 ÷ 1,50 1,00 ÷ 1,50 1,90 ÷ 2,60 1,90 ÷ 2,60 4,00 ÷ 6,00 4,00 ÷ 6,00
8,00 ÷ 10,00
8,00 ÷ 10,00
8,00 ÷ 9,50
0,50 ÷ 1,00 0,50 ÷ 1,00 0,50 ÷ 1,00
0,20 ÷ 0,50 0,15 ÷ 0,40 0,15 ÷ 0,40 0,15 ÷ 0,40 0,15 ÷ 0,40 0,15 ÷ 0,40 0,15 ÷ 0,40
0,30 ÷ 0,80
0,30 ÷ 0,90
0,30 ÷ 0,80 0,30 ÷ 0,60 0,30 ÷ 0,80 0,30 ÷ 0,80 0,30 ÷ 0,60 0,30 ÷ 0,60 0,30 ÷ 0,60 0,30 ÷ 0,60 0,30 ÷ 0,60 0,30 ÷ 0,60 0,30 ÷ 0,60 1,00 ÷ 1,45 1,00 ÷ 1,45 1,00 ÷ 1,45 1,00 ÷ 1,45 1,00 ÷ 1,45 1,00 ÷ 1,45
0,05 ÷ 0,20 0,05 ÷ 0,15 0,05 ÷ 0,20 0,05 ÷ 0,20 0,05 ÷ 0,15 0,05 ÷ 0,15
0,08 ÷ 0,12
0,05
0,05
0,058
0,058
0,40
0,40
0,15
0,15
0,40
0,40
0,40
0,40
0,08
0,08
0,10min
0,10min
0,29 ÷ 1,06
0,29 ÷ 1,06
0,50 ÷ 1,35
0,15 ÷ 0,40
—
—
— — — —
—
—
—
—
—
—
—
—
— ————————————
Mn P S Si Cr Mo Ni Cu V Nb
CHEMICAL COMPOSITION IN % BY MASS 1
N Al Ti Zr
ASTM
/ASM
EA/
SA 2
34AS
TM/A
SME
A/SA
420
ASTM
/ASM
EA/
SA 2
34AS
TMA
860
MSS
SP
75
19
415 ÷ 665
Rs. min. Yield Strength
MPa
Rm. min. Tensile Strength
MPa
A % min. Elongation
Long. Trasv. Joule°C
Impact Test KVHBW HRCSTEEL
GRADE
WPBabc
WPCabc
WPL6
WP1WP12 CL1WP12 CL2WP11 CL1WP11 CL2WP11 CL3WP22 CL1WP22 CL3WP5 CL1WP5 CL3WP9 CL1WP9 CL3
WP91WPHY 42WPHY 46WPHY 52WPHY 60WPHY 65WPHY 70WPHY 42WPHY 46WPHY 52WPHY 60WPHY 65WPHY 70
ASTM
/ASM
EA/
SA 2
34AS
TM/A
SME
A/SA
420
ASTM
/ASM
EA/
SA 2
34AS
TMA
860
MSS
SP
75
MECHANICAL PROPERTIES
240 415 30 20 197
197
187
197197197197197197197197217217217217
235 22
22235
not required
not required
not requirednot requirednot requirednot requirednot requirednot requirednot requirednot requirednot requirednot requirednot requirednot requirednot required
30 20
16,5 -45 17,6
20202020202020202020202013
30
3030303030303030303030302025 25 -46 40
4040404040272727272727
-46-46-46-46-46-7-7-7-7-7-7
25 2525 2520 2020 2020 2025 2525 2525 2520 2020 2018 18
485
415485415485520415520415520415520620
414434455517531565
275
240
205220275205275310205310205310205310415290315360415450485289317358414448482
380 ÷ 550
415 ÷ 585
190 ÷ 250
435 ÷ 605 455 ÷ 625 515 ÷ 690 530 ÷ 705 550 ÷ 725
—
—
—
—————————————
1: Per gli elementi che hanno un solo valore senza informazioni aggiuntive, si considera tale valore come massimo a: Per ogni riduzione di 0,01% al di sotto del valore massimo del Carbonio indicato, verrà consentito un incremento di 0,06% del Manganese al di sopra del valore massimo permesso, fino ad un limite massimo di 1,65%
b: Cr + Ni + Cr + Mo non devono superare l’1,00 %c: Cr + Mo non devono superare lo 0,32%
1: For elements where only one value is indicated without further information, this value shall be regarded as maximuma: For each reduction of 0,01% below the specified Carbon maximum, an increase of 0,06 % Manganese above the specified maximum will be permitted, up to a maximum of 1,65 %
b: Cr + Ni + Cr + Mo shall not exceed 1,00 %c: Cr + Mo shall not exceed 0,32%
Materiali e proprietà chimiche Materials and chemical properties
20
STEEL GRADE
P235GH
P265GH
ST35.8/I
ST37.0W
AE250B
AE220A
A 42 CP
EN 1
0253
-2D
IN 2
609
NF
A 49
-281
NF
A 36
-205
C
0,16
0,20
0,17
0,21
0,18 0,035 0,03 0,30 0,25 0,07 0,30 0,30
0,15 0,80 0,035 0,035 0,30
1,00 0,035 0,035 0,35
0,04 0,04 —
—
—
— — — — —
— — — — —
— — — —
— — — — — — — —
— — — — — — —
— — — — — — — —0,40 ÷0,80
0,120,17
1,40 0,025
0,025 0,02
0,02 0,40 0,30 0,08 0,30 0,30
0,009
0,02b 0,01b 0,01b 0,04b
1,20 0,025 0,02 0,35 0,30 0,08 0,30 0,30 0,02b 0,01b 0,04b0,02mina
0,02mina
—
Mn P S Si Cr Mo Ni Cu V Nb
CHEMICAL COMPOSITION IN % BY MASS 1
N Al Ti
0,60min
0,35 ÷0,65
0,17 ÷0,37
0,10 ÷0,35
21
Rs. min. Yield Strength
MPa
Rm. min. Tensile Strength
MPa
A % min. Elongation
Long. Trasv. Joule°C
Impact Test KVHBW HRCSTEEL
GRADE
P235GH
P265GH
ST35.8/I
ST37.0W
AE250B
AE220A
A 42 CP
EN 1
0253
-2D
IN 2
609
NF
A 49
-281
NF
A 36
-205
MECHANICAL PROPERTIES
235 25 23 187 —
—
—
—
—
—
—
187
187
187
180
170
180
not mandatory
not mandatory
not mandatory
not mandatory
not mandatory
not mandatory
not mandatory
21
23
23
—
—
—
23
25
25
23
26
27
265
235
235
250
220
245
1: Per gli elementi che hanno un solo valore senza informazioni aggiuntive, si considera tale valore come massimo a: Questo requisito non si applica a condizione che l’acciaio contenga una quantità sufficiente di altri elementi che si legano con l’azoto, cosa che deve essere dichiarata
b: Il contenuto di questi elementi non deve essere riportato a meno che non siano stati aggiunti intenzionalmente alla lega
1: For elements where only one value is indicated without further information, this value shall be regarded as maximuma: This requirement is not applicable provided the steel contains a sufficient amount of other nitrogen binding elements which shall be reported
b: The content of those elements need not to be reported unless intetionally added to the cast
360 ÷500
410 ÷570
360 ÷480
350 ÷480
410 ÷530
370 ÷490
410 ÷490
Tee uguali e ridotti Equal and reducing tees
24
D d M L NPS SCH. STD SCH. XS SCH. 10 SCH. 20 SCH. 30 SCH. 40 [mm] [mm] [mm] [mm] S S1 S S1 S S1 S S1 S S1 S S1
21,3 — 25,4 25,4 1/2” 2,77 — 3,73 — — — — — — — 2,77 — 21,3 17,3 1/2” x 3/8” 2,77 2,31 3,73 3,20 — — — — — — 2,77 2,31 21,3 13,7 1/2” x 1/4” 2,77 2,24 3,73 3,02 — — — — — — 2,77 2,24 26,7 — 3/4” 2,87 — 3,91 — — — — — — — 2,87 — 26,7 21,3 3/4” x 1/2” 2,87 2,77 3,91 3,73 — — — — — — 2,87 2,77 26,7 17,3 29,0 29,0 3/4” x 3/8” 2,87 2,31 3,91 3,20 — — — — — — 2,87 2,31 33,4 — 1” 3,38 — 4,55 — — — — — — — 3,38 — 33,4 26,7 38,1 38,1 1” x 3/4” 3,38 2,87 4,55 3,91 — — — — — — 3,38 2,87 33,4 21,3 1” x 1/2” 3,38 2,77 4,55 3,73 — — — — — — 3,38 2,77 42,2 — 11/4” 3,56 — 4,85 — — — — — — — 3,56 — 42,2 33,4
11/4” x 1” 3,56 3,38 4,85 4,55 — — — — — — 3,56 3,38
42,2 26,7 11/4” x 3/4” 3,56 2,87 4,85 3,91 — — — — — — 3,56 2,87 42,2 21,3 11/4” x 1/2” 3,56 2,77 4,85 3,73 — — — — — — 3,56 2,77 48,3 — 11/2” 3,68 — 5,08 — — — — — 3,18 3,18 3,68 — 48,3 42,2 11/2” x 11/4” 3,68 3,56 5,08 4,85 — — — — — — 3,68 3,56 48,3 33,4 57,1 57,1 11/2” x 1” 3,68 3,38 5,08 4,55 — — — — — — 3,68 3,38 48,3 26,7 11/2” x 3/4” 3,68 2,87 5,08 3,91 — — — — — — 3,68 2,87 48,3 21,3 11/2” x 1/2” 3,68 2,77 5,08 3,73 — — — — — — 3,68 2,77 60,3 — 63,5 2” 3,91 — 5,54 — — — — — 3,18 3,18 3,91 — 60,3 48,3 60,3 2” x 1 1/2” 3,91 3,68 5,54 5,08 — — — — 3,18 3,18 3,91 3,68 60,3 42,2 57,0 2” x 11/4” 3,91 3,56 5,54 4,85 — — — — — — 3,91 3,56 60,3 33,4 50,8 2” x 1” 3,91 3,38 5,54 4,55 — — — — — — 3,91 3,38 60,3 26,7 2” x 3/4” 3,91 2,87 5,54 3,91 — — — — — — 3,91 2,87 60,3 21,3 2” x 1/2” 3,91 2,77 5,54 3,73 — — — — — — 3,91 2,77 73,0 — 76,2 21/2” 5,16 — 7,01 — — — — — 4,78 — 5,16 — 73,0 60,3 69,9 21/2” x 2” 5,16 3,91 7,01 5,54 — — — — 4,78 3,18 5,16 3,91 73,0 48,3 76,2 66,7 21/2” x 11/2” 5,16 3,68 7,01 5,08 — — — — 4,78 3,18 5,16 3,68 73,0 42,2 63,5 21/2” x 11/4” 5,16 3,56 7,01 4,85 — — — — — — 5,16 3,56 73,0 33,4 57,0 21/2” x 1” 5,16 3,38 7,01 4,55 — — — — — — 5,16 3,38 88,9 — 85,4 3” 5,49 — 7,62 — — — — — 4,78 — 5,49 — 88,9 73,0 82,6 3” x 21/2” 5,49 5,16 7,62 7,01 — — — — 4,78 4,78 5,49 5,16 88,9 60,3 76,2 3” x 2” 5,49 3,91 7,62 5,54 — — — — 4,78 3,18 5,49 3,91 88,9 48,3 73,0 3” x 11/2” 5,49 3,68 7,62 5,08 — — — — 4,78 3,18 5,49 3,68 88,9 42,2 69,9 3” x 11/4” 5,49 3,56 7,62 4,85 — — — — — — 5,49 3,56 88,9 33,4 65,9 3” x 1” 5,49 3,38 7,62 4,55 — — — — — — 5,49 3,38 101,6 — 95,2 95,2 31/2” 5,74 — 8,08 — — — — — 4,78 — 5,74 —
25,0 25,0
28,528,5
47,6 47,6
63,5
44,5
85,7
Tolleranze dimensionali: pag. 81Pezzi a tee con dimensioni
o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Reducing tees with special
thickness and size: on application (−)
SCH. 60 SCH. 80 SCH. 100 SCH. 120 SCH. 140 SCH. 160 SCH. XXS NPS S S1 S S1 S S1 S S1 S S1 S S1 S S1
— — 3,73 — — — — — — — 4,75 — 7,47 — 1/2” — — 3,73 3,20 — — — — — — — — — — 1/2” x 3/8” — — 3,73 3,02 — — — — — — — — — — 1/2” x 3/8” — — 3,91 — — — — — — — 5,54 — 7,82 — 3/4” — — 3,91 3,73 — — — — — — 5,54 4,75 7,82 7,47 3/4” x 1/2” — — 3,91 3,20 — — — — — — — — — — 3/4” x 3/8” — — 4,55 — — — — — — — 6,35 — 9,09 — 1” — — 4,55 3,91 — — — — — — 6,35 5,54 9,09 7,82 1” x 3/4” — — 4,55 3,73 — — — — — — 6,35 4,75 9,09 7,47 1” x 1/2” — — 4,85 — — — — — — — 6,35 — 9,70 — 11/4” — — 4,85 4,55 — — — — — — 6,35 6,35 9,70 9,09 11/4” x 1” — — 4,85 3,91 — — — — — — 6,35 5,54 9,70 7,82 11/4” x 3/4” — — 4,85 3,73 — — — — — — 6,35 4,75 9,70 7,47 11/4” x 1/2” — — 5,08 — — — — — — — 7,14 — 10,16 — 11/2” — — 5,08 4,85 — — — — — — 7,14 6,35 10,16 9,70 11/2” x 11/4” — — 5,08 4,55 — — — — — — 7,14 6,35 10,16 9,09 11/2” x 1” — — 5,08 3,91 — — — — — — 7,14 5,54 10,16 7,82 11/2” x 3/4” — — 5,08 3,73 — — — — — — 7,14 4,75 10,16 7,47 11/2” x 1/2” — — 5,54 — — — — — — — 8,74 — 11,07 — 2” — — 5,54 5,08 — — — — — — 8,74 7,14 11,07 10,16 2” x 11/2” — — 5,54 4,85 — — — — — — 8,74 6,35 11,07 9,70 2” x 11/4” — — 5,54 4,55 — — — — — — 8,74 6,35 11,07 9,09 2” x 1” — — 5,54 3,91 — — — — — — 8,74 5,54 11,07 7,82 2” x 3/4” — — 5,54 3,73 — — — — — — 8,74 4,75 11,07 7,47 2” x 1/2” — — 7,01 — — — — — — — 9,52 — 14,02 — 21/2” — — 7,01 5,54 — — — — — — 9,52 8,74 14,02 11,07 21/2” x 2” — — 7,01 5,08 — — — — — — 9,52 7,14 14,02 10,16 21/2” x 11/2” — — 7,01 4,85 — — — — — — 9,52 6,35 14,02 9,70 21/2” x 11/4” — — 7,01 4,55 — — — — — — 9,52 6,35 14,02 9,09 21/2” x 1” — — 7,62 — — — — — — — 11,12 — 15,24 — 3” — — 7,62 7,01 — — — — — — 11,12 9,52 15,24 14,02 3” x 21/2” — — 7,62 5,54 — — — — — — 11,12 8,74 15,24 11,07 3” x 2” — — 7,62 5,08 — — — — — — 11,12 7,14 15,24 10,16 3” x 11/2” — — 7,62 4,85 — — — — — — 11,12 6,35 15,24 9,70 3” x 11/4” — — 7,62 4,55 — — — — — — 11,12 6,35 15,24 9,09 3” x 1” — — 8,08 — — — — — — — — — — — 31/2”
25
Tee uguali e ridotti Equal and reducing tees
D d M L NPS SCH. STD SCH. XS SCH. 10 SCH. 20 SCH. 30 SCH. 40 [mm] [mm] [mm] [mm] S S1 S S1 S S1 S S1 S S1 S S1
101,6 88,9 92,0 31/2” x 3” 5,74 5,49 8,08 7,62 — — — — 4,78 4,78 5,74 5,49 101,6 73,0 89,0 31/2” x 21/2” 5,74 5,16 8,08 7,01 — — — — 4,78 4,78 5,74 5,16 101,6 60,3 83,0 31/2” x 2” 5,74 3,91 8,08 5,54 — — — — 4,78 3,18 5,74 3,91 101,6 48,3 79,0 31/2” x 11/2” 5,74 3,68 8,08 5,08 — — — — 4,78 3,18 5,74 3,68 114,3 — 104,8 4” 6,02 — 8,56 — — — — — 4,78 — 6,02 — 114,3 101,6 101,6 4” x 31/2” 6,02 5,74 8,56 8,08 — — — — 4,78 4,78 6,02 5,74 114,3 88,9 98,4 4” x 3” 6,02 5,49 8,56 7,62 — — — — 4,78 4,78 6,02 5,49 114,3 73,0 95,2 4” x 21/2” 6,02 5,16 8,56 7,01 — — — — 4,78 4,78 6,02 5,16 114,3 60,3 88,9 4” x 2” 6,02 3,91 8,56 5,54 — — — — 4,78 3,18 6,02 3,91 114,3 48,3 85,7 4” x 11/2” 6,02 3,68 8,56 5,08 — — — — 4,78 3,18 6,02 3,68 114,3 42,2 83,7 4” x 11/4” 6,02 3,56 8,56 4,85 — — — — — — 6,02 3,56 114,3 33,4 78,6 4” x 1” 6,02 3,38 8,56 4,55 — — — — — — 6,02 3,38 141,3 — 123,8 5” 6,55 — 9,52 — — — — — — — 6,55 — 141,3 114,3 117,4 5” x 4” 6,55 6,02 9,52 8,56 — — — — — — 6,55 6,02 141,3 101,6 114,3 5” x 31/2” 6,55 5,74 9,52 8,08 — — — — — — 6,55 5,74
141,3 88,9 111,1 5” x 3” 6,55 5,49 9,52 7,62 — — — — — — 6,55 5,49
141,3 73,0 107,9 5” x 21/2” 6,55 5,16 9,52 7,01 — — — — — — 6,55 5,16
141,3 60,3 104,7 5” x 2” 6,55 3,91 9,52 5,54 — — — — — — 6,55 3,91
168,3 — 142,8 6” 7,11 — 10,97 — — — — — — — 7,11 — 168,3 141,3 136,5 6” x 5” 7,11 6,55 10,97 9,52 — — — — — — 7,11 6,55 168,3 114,3 130,1 6” x 4” 7,11 6,02 10,97 8,56 — — — — — — 7,11 6,02 168,3 101,6 142,8 127,0 6” x 31/2” 7,11 5,74 10,97 8,08 — — — — — — 7,11 5,74 168,3 88,9 123,8 6” x 3” 7,11 5,49 10,97 7,62 — — — — — — 7,11 5,49 168,3 73,0 120,6 6” x 21/2” 7,11 5,16 10,97 7,01 — — — — — — 7,11 5,16 168,3 60,3 115,9 6” x 2” 7,11 3,91 10,97 5,54 — — — — — — 7,11 3,91 219,1 — 177,8 8” 8,18 — 12,70 — — — 6,35 — 7,04 — 8,18 — 219,1 168,3 168,2 8” x 6” 8,18 7,11 12,70 10,97 — — — — — — 8,18 7,11 219,1 141,3
177,8 161,9 8” x 5” 8,18 6,55 12,70 9,52 — — — — — — 8,18 6,55
219,1 114,3 155,5 8” x 4” 8,18 6,02 12,70 8,56 — — — — 7,04 4,78 8,18 6,02 219,1 101,6 152,4 8” x 31/2” 8,18 5,74 12,70 8,08 — — — — 7,04 4,78 8,18 5,74 219,1 88,9 150,8 8” x 3” 8,18 5,49 12,70 7,62 — — — — 7,04 4,78 8,18 5,49 273,0 — 215,9 10” 9,27 — 12,70 — — — 6,35 — 7,80 — 9,27 — 273,0 219,1 203,2 10” x 8” 9,27 8,18 12,70 12,70 — — 6,35 6,35 7,80 7,04 9,27 8,18 273,0 168,3 215,9 193,7 10” x 6” 9,27 7,11 12,70 10,97 — — — — — — 9,27 7,11 273,0 141,3 190,5 10” x 5” 9,27 6,55 12,70 9,52 — — — — — — 9,27 6,55 273,0 114,3 184,2 10” x 4” 9,27 6,02 12,70 8,56 — — — — 7,80 4,78 9,27 6,02
95,2
104,8
123,8
26
Tolleranze dimensionali: pag. 81Pezzi a tee con dimensioni
o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Reducing tees with special
thickness and size: on application (−)
SCH. 60 SCH. 80 SCH. 100 SCH. 120 SCH. 140 SCH. 160 SCH. XXS NPS S S1 S S1 S S1 S S1 S S1 S S1 S S1
— — 8,08 7,62 — — — — — — — — — — 31/2” x 3”
— — 8,08 7,01 — — — — — — — — — — 31/2” x 21/2”
— — 8,08 5,54 — — — — — — — — — — 31/2” x 2”
— — 8,08 5,08 — — — — — — — — — — 31/2” x 11/2”
— — 8,56 — — — 11,12 — — — 13,49 — 17,12 — 4”
— — 8,56 8,08 — — — — — — — — — — 4” x 31/2”
— — 8,56 7,62 — — — — — — 13,49 11,12 17,12 15,24 4” x 3”
— — 8,56 7,01 — — — — — — 13,49 9,52 17,12 14,02 4” x 21/2”
— — 8,56 5,54 — — — — — — 13,49 8,74 17,12 11,07 4” x 2”
— — 8,56 5,08 — — — — — — 13,49 7,14 17,12 10,16 4” x 11/2”
— — 8,56 4,85 — — — — — — 13,49 6,35 17,12 9,70 4” x 11/4”
— — 8,56 4,55 — — — — — — 13,49 6,35 17,12 9,09 4” x 1”
— — 9,52 — — — 12,70 — — — 15,87 — 19,05 — 5”
— — 9,52 8,56 — — 12,70 11,12 — — 15,87 13,49 19,05 17,12 5” x 4”
— — 9,52 8,08 — — — — — — — — — — 5” x 31/2”
— — 9,52 7,62 — — — — — — 15,87 11,12 19,05 15,24 5” x 3”
— — 9,52 7,01 — — — — — — 15,87 9,52 19,05 14,02 5” x 21/2”
— — 9,52 5,54 — — — — — — 15,87 8,74 19,05 11,07 5” x 2”
— — 10,97 — — — 14,27 — — — 18,24 — 21,94 — 6”
— — 10,97 9,52 — — 14,27 12,70 — — 18,24 15,87 21,94 19,05 6” x 5”
— — 10,97 8,56 — — 14,27 11,12 — — 18,24 13,49 21,94 17,12 6” x 4”
— — 10,97 8,08 — — — — — — — — — — 6” x 31/2”
— — 10,97 7,62 — — — — — — 18,24 11,12 21,94 15,24 6” x 3”
— — 10,97 7,01 — — — — — — 18,24 9,52 21,94 14,02 6” x 21/2”
— — 10,97 5,54 — — — — — — 18,24 8,74 21,94 11,07 6” x 2” 10,30 — 12,70 — 15,06 — 18,24 — 20,62 — 23,01 — 22,22 — 8” — — 12,70 10,97 — — 18,24 14,27 — — 23,01 18,24 22,22 21,94 8” x 6” — — 12,70 9,52 — — 18,24 12,70 — — 23,01 15,87 22,22 19,05 8” x 5” — — 12,70 8,56 — — 18,24 11,12 — — 23,01 13,49 22,22 17,12 8” x 4” — — 12,70 8,08 — — — — — — — — — — 8” x 31/2” — — 12,70 7,62 — — — — — — 23,01 11,12 22,22 15,24 8” x 3” 12,70 — 15,06 — 18,24 — 21,41 — 25,40 — 28,57 — 25,40 — 10” 12,70 10,30 15,06 12,70 18,24 15,06 21,41 18,24 25,40 20,62 28,57 23,01 25,40 22,22 10” x 8” — — 15,06 10,97 — — 21,41 14,27 — — 28,57 18,24 25,40 21,94 10” x 6” — — 15,06 9,52 — — 21,41 12,70 — — 28,57 15,87 25,40 19,05 10” x 5” — — 15,06 8,56 — — 21,41 11,12 — — 28,57 13,49 25,40 17,12 10” x 4”
27
Tee uguali e ridotti Equal and reducing tees
D d M L NPS SCH. STD SCH. XS SCH. 10 SCH. 20 SCH. 30 SCH. 40 [mm] [mm] [mm] [mm] S S1 S S1 S S1 S S1 S S1 S S1
323,8 — 254,0 12” 9,52 — 12,70 — — — 6,35 — 8,38 — 10,31 — 323,8 273,0 241,3 12” x 10” 9,52 9,27 12,70 12,70 — — 6,35 6,35 8,38 7,80 10,31 9,27 323,8 219,1 228,6 12” x 8” 9,52 8,18 12,70 12,70 — — 6,35 6,35 8,38 7,04 10,31 8,18 323,8 168,3 219,1 12” x 6” 9,52 7,11 12,70 10,97 — — — — — — 10,31 7,11 323,8 141,3 215,9 12” x 5” 9,52 6,55 12,70 9,52 — — — — — — 10,31 6,55 323,8 114,3 214,1 12” x 4” 9,52 6,02 12,70 8,56 — — — — 8,38 4,78 10,31 6,02 355,6 — 279,4 14” 9,52 — 12,70 — 6,35 — 7,92 — 9,52 — 11,12 — 355,6 323,8 269,9 14” x 12” 9,52 9,52 12,70 12,70 — — 7,92 6,35 9,52 8,38 11,12 10,31 355,6 273,0 257,2 14” x 10” 9,52 9,27 12,70 12,70 — — 7,92 6,35 9,52 7,80 11,12 9,27 355,6 219,1 247,7 14” x 8” 9,52 8,18 12,70 12,70 — — 7,92 6,35 9,52 7,04 11,12 8,18 355,6 168,3 238,1 14” x 6” 9,52 7,11 12,70 10,97 — — — — — — 11,12 7,11 406,4 — 304,9 16” 9,52 — 12,70 — 6,35 — 7,92 — 9,52 — 12,70 — 406,4 355,6 304,9 16” x 14” 9,52 9,52 12,70 12,70 6,35 6,35 7,92 7,92 9,52 9,52 12,70 11,12 406,4 323,8 295,6 16” x 12” 9,52 9,52 12,70 12,70 — — 7,92 6,35 9,52 8,38 12,70 10,31 406,4 273,0 282,6 16” x 10” 9,52 9,27 12,70 12,70 — — 7,92 6,35 9,52 7,80 12,70 9,27 406,4 219,1 273,1 16” x 8” 9,52 8,18 12,70 12,70 — — 7,92 6,35 9,52 7,04 12,70 8,18 406,4 168,3 263,5 16” x 6” 9,52 7,11 12,70 10,97 — — — — — — 12,70 7,11 457,2 — 342,9 18” 9,52 — 12,70 — 6,35 — 7,92 — 11,12 — 14,27 — 457,2 406,4 330,2 18” x 16” 9,52 9,52 12,70 12,70 6,35 6,35 7,92 7,92 11,12 9,52 14,27 12,70 457,2 355,6
342,9 330,2 18” x 14” 9,52 9,52 12,70 12,70 6,35 6,35 7,92 7,92 11,12 9,52 14,27 11,12
457,2 323,8 320,7 18” x 12” 9,52 9,52 12,70 12,70 — — 7,92 6,35 11,12 8,38 14,27 10,31 457,2 273,0 308,0 18” x 10” 9,52 9,27 12,70 12,70 — — 7,92 6,35 11,12 7,80 14,27 9,27 457,2 219,1 298,5 18” x 8” 9,52 8,18 12,70 12,70 — — 7,92 6,35 11,12 7,04 14,27 8,18 508,0 — 381,0 20” 9,52 — 12,70 — 6,35 — 9,52 — 12,70 — 15,06 — 508,0 457,2 368,3 20” x 18” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 7,92 12,70 11,12 15,06 14,27 508,0 406,4 355,6 20” x 16” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 7,92 12,70 9,52 15,06 12,70 508,0 355,6 381,0 355,6 20” x 14” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 7,92 12,70 9,52 15,06 11,12 508,0 323,8 346,1 20” x 12” 9,52 9,52 12,70 12,70 — — 9,52 6,35 12,70 8,38 15,06 10,31 508,0 273,0 333,4 20” x 10” 9,52 9,27 12,70 12,70 — — 9,52 6,35 12,70 7,80 15,06 9,27 508,0 219,1 324,0 20” x 8” 9,52 8,18 12,70 12,70 — — 9,52 6,35 12,70 7,04 15,06 8,18 558,8 — 419,1 22” 9,52 — 12,70 — 6,35 — 9,52 — 12,70 — — — 558,8 508,0 406,4 22” x 20” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 9,52 12,70 12,70 — — 558,8 457,2
419,1 393,7 22” x 18” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 7,92 12,70 11,12 — —
558,8 406,4 381,0 22” x 16” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 7,92 12,70 9,52 — — 558,8 355,6 381,0 22” x 14” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 7,92 12,70 9,52 — — 558,8 323,8 371,5 22” x 12” 9,52 9,52 12,70 12,70 — — 9,52 6,35 12,70 8,38 — —
254,0
279,4
304,9
28
Tolleranze dimensionali: pag. 81Pezzi a tee con dimensioni
o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Reducing tees with special
thickness and size: on application (−)
SCH. 60 SCH. 80 SCH. 100 SCH. 120 SCH. 140 SCH. 160 SCH. XXS NPS S S1 S S1 S S1 S S1 S S1 S S1 S S1
14,30 — 17,45 — 21,41 — 25,40 — 28,57 — 33,32 — 25,40 — 12” 14,30 12,70 17,45 15,06 21,41 18,24 25,40 21,41 28,57 25,40 33,32 28,57 25,40 25,40 12” x 10” 14,30 10,30 17,45 12,70 21,41 15,06 25,40 18,24 28,57 20,62 33,32 23,01 25,40 22,22 12” x 8” — — 17,45 10,97 — — 25,40 14,27 — — 33,32 18,24 25,40 21,94 12” x 6” — — 17,45 9,52 — — 25,40 12,70 — — 33,32 15,87 25,40 19,05 12” x 5” — — 17,45 8,56 — — 25,40 11,12 — — 33,32 13,49 25,40 17,12 12” x 4” 15,10 — 19,05 — 23,80 — 27,76 — 31,75 — 35,71 — — — 14” 15,10 14,30 19,05 17,45 23,80 21,41 27,76 25,40 31,75 28,57 35,71 33,32 — — 14” x 12” 15,10 12,70 19,05 15,06 23,80 18,24 27,76 21,41 31,75 25,40 35,71 28,57 — — 14” x 10” 15,10 10,30 19,05 12,70 23,80 15,06 27,76 18,24 31,75 20,62 35,71 23,01 — — 14” x 8” — — 19,05 10,97 — — 27,76 14,27 — — 35,71 18,24 — — 14” x 6” 16,70 — 21,41 — 26,19 — 30,94 — 36,52 — 40,46 — — — 16” 16,70 15,10 21,41 19,05 26,19 23,80 30,94 27,76 36,52 31,75 40,46 35,71 — — 16” x 14” 16,70 14,30 21,41 17,45 26,19 21,41 30,94 25,40 36,52 28,57 40,46 33,32 — — 16” x 12” 16,70 12,70 21,41 15,06 26,19 18,24 30,94 21,41 36,52 25,40 40,46 28,57 — — 16” x 10” 16,70 10,30 21,41 12,70 26,19 15,06 30,94 18,24 36,52 20,62 40,46 23,01 — — 16” x 8” — — 21,41 10,97 — — 30,94 14,27 — — 40,46 18,24 — — 16” x 6” 19,05 — 23,80 — 29,36 — 34,92 — 39,67 — 45,24 — — — 18” 19,05 16,70 23,80 21,41 29,36 26,19 34,92 30,94 39,67 36,52 45,24 40,46 — — 18” x 16” 19,05 15,10 23,80 19,05 29,36 23,80 34,92 27,76 39,67 31,75 45,24 35,71 — — 18” x 14” 19,05 14,30 23,80 17,45 29,36 21,41 34,92 25,40 39,67 28,57 45,24 33,32 — — 18” x 12” 19,05 12,70 23,80 15,06 29,36 18,24 34,92 21,41 39,67 25,40 45,24 28,57 — — 18” x 10” 19,05 10,30 23,80 12,70 29,36 15,06 34,92 18,24 39,67 20,62 45,24 23,01 — — 18” x 8” 20,60 — 26,19 — 32,54 — 38,10 — 44,45 — 49,99 — — — 20” 20,60 19,05 26,19 23,80 32,54 29,36 38,10 34,92 44,45 39,67 49,99 45,24 — — 20” x 18” 20,60 16,70 26,19 21,41 32,54 26,19 38,10 30,94 44,45 36,52 49,99 40,46 — — 20” x 16” 20,60 15,10 26,19 19,05 32,54 23,80 38,10 27,76 44,45 31,75 49,99 35,71 — — 20” x 14” 20,60 14,30 26,19 17,45 32,54 21,41 38,10 25,40 44,45 28,57 49,99 33,32 — — 20” x 12” 20,60 12,70 26,19 15,06 32,54 18,24 38,10 21,41 44,45 25,40 49,99 28,57 — — 20” x 10” 20,60 10,30 26,19 12,70 32,54 15,06 38,10 18,24 44,45 20,62 49,99 23,01 — — 20” x 8” 22,23 — 28,58 — 34,93 — 41,28 — 47,63 — 53,98 — — — 22” 22,23 20,60 28,58 26,19 34,93 32,54 41,28 38,10 47,63 44,45 53,98 49,99 — — 22” x 20” 22,23 19,05 28,58 23,80 34,93 29,36 41,28 34,92 47,63 39,67 53,98 45,24 — — 22” x 18” 22,23 16,70 28,58 21,41 34,93 26,19 41,28 30,94 47,63 36,52 53,98 40,46 — — 22” x 16” 22,23 15,10 28,58 19,05 34,93 23,80 41,28 27,76 47,63 31,75 53,98 35,71 — — 22” x 14” 22,23 14,30 28,58 17,45 34,93 21,41 41,28 25,40 47,63 28,57 53,98 33,32 — — 22” x 12”
29
Tee uguali e ridotti Equal and reducing tees
D d M L NPS SCH. STD SCH. XS SCH. 10 SCH. 20 SCH. 30 SCH. 40 [mm] [mm] [mm] [mm] S S1 S S1 S S1 S S1 S S1 S S1
558,8 273,0 419,1 359,0 22” x 10” 9,52 9,27 12,70 12,70 — — 9,52 6,35 12,70 7,80 — — 609,6 — 431,8 24” 9,52 — 12,70 — 6,35 — 9,52 — 14,25 — 17,45 — 609,6 558,8 431,8 24” x 22” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 9,52 14,25 12,70 — — 609,6 508,0 431,8 24” x 20” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 9,52 14,25 12,70 17,45 15,06 609,6 457,2 419,1 24” x 18” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 7,92 14,25 11,12 17,45 14,27 609,6 406,4 406,4 24” x 16” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 7,92 14,25 9,52 17,45 12,70 609,6 355,6 406,4 24” x 14” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 7,92 14,25 9,52 17,45 11,12 609,6 323,8 396,9 24” x 12” 9,52 9,52 12,70 12,70 — — 9,52 6,35 14,25 8,38 17,45 10,31 609,6 273,0 384,0 24” x 10” 9,52 9,27 12,70 12,70 — — 9,52 6,35 14,25 7,80 17,45 9,27 660,4 — 495,3 26” 9,52 — 12,70 — 7,92 — 12,70 — — — — — 660,4 609,6 482,6 26” x 24” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 — — — — 660,4 558,8 469,9 26” x 22” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 — — — — 660,4 508,0 457,2 26” x 20” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 — — — — 660,4 457,2 444,5 26” x 18” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 — — — — 660,4 406,4 431,8 26” x 16” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 — — — — 660,4 355,6 431,8 26” x 14” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 — — — — 660,4 323,8 422,0 26” x 12” 9,52 9,52 12,70 12,70 — — 12,70 6,35 — — — — 711,2 — 520,7 28” 9,52 — 12,70 — 7,92 — 12,70 — 15,88 — — — 711,2 660,4 520,7 28” x 26” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 — — — — 711,2 609,6 508,0 28” x 24” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 14,25 — — 711,2 558,8 495,3 28” x 22” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 12,70 — — 711,2 508,0 482,6 28” x 20” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 12,70 — — 711,2 457,2 469,9 28” x 18” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 11,12 — — 711,2 406,4 457,2 28” x 16” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 9,52 — — 711,2 355,6 457,0 28” x 14” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 9,52 — — 711,2 323,8 448,0 28” x 12” 9,52 9,52 12,70 12,70 — — 12,70 6,35 15,88 8,38 — — 762,0 — 559,0 30” 9,52 — 12,70 — 7,92 — 12,70 — 15,88 — — — 762,0 711,2 546,0 30” x 28” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 15,88 15,88 — — 762,0 660,0 546,0 30” x 26” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 — — — — 762,0 609,6 533,0 30” x 24” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 14,25 — — 762,0 559,0 521,0 30” x 22” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 12,70 — — 762,0 508,0 508,0 30” x 20” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 12,70 — — 762,0 457,2 495,0 30” x 18” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 11,12 — — 762,0 406,4 483,0 30” x 16” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 9,52 — — 762,0 355,6 483,0 30” x 14” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 9,52 — — 762,0 323,8 473,0 30” x 12” 9,52 9,52 12,70 12,70 — — 12,70 6,35 15,88 8,38 — —
431,8
495,3
520,7
30
Tolleranze dimensionali: pag. 81Pezzi a tee con dimensioni
o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Reducing tees with special
thickness and size: on application (−)
559,0
SCH. 60 SCH. 80 SCH. 100 SCH. 120 SCH. 140 SCH. 160 SCH. XXS NPS S S1 S S1 S S1 S S1 S S1 S S1 S S1
22,23 12,70 28,58 15,06 34,93 18,24 41,28 21,41 47,63 25,40 53,98 28,57 — — 22” x 10” 24,60 — 30,94 — 38,89 — 46,02 — 52,37 — 59,51 — — — 24” 24,60 22,23 30,94 28,58 38,89 34,93 46,02 41,28 52,37 47,63 59,51 53,98 — — 24” x 22” 24,60 20,60 30,94 26,19 38,89 32,54 46,02 38,10 52,37 44,45 59,51 49,99 — — 24” x 20” 24,60 19,05 30,94 23,80 38,89 29,36 46,02 34,92 52,37 39,67 59,51 45,24 — — 24” x 18” 24,60 16,70 30,94 21,41 38,89 26,19 46,02 30,94 52,37 36,52 59,51 40,46 — — 24” x 16” 24,60 15,10 30,94 19,05 38,89 23,80 46,02 27,76 52,37 31,75 59,51 35,71 — — 24” x 14” 24,60 14,30 30,94 17,45 38,89 21,41 46,02 25,40 52,37 28,57 59,51 33,32 — — 24” x 12” 24,60 12,70 30,94 15,06 38,89 18,24 46,02 21,41 52,37 25,40 59,51 28,57 — — 24” x 10” — — — — — — — — — — — — — — 26” — — — — — — — — — — — — — — 26” x 24” — — — — — — — — — — — — — — 26” x 22” — — — — — — — — — — — — — — 26” x 20” — — — — — — — — — — — — — — 26” x 18” — — — — — — — — — — — — — — 26” x 16” — — — — — — — — — — — — — — 26” x 14” — — — — — — — — — — — — — — 26” x 12” — — — — — — — — — — — — — — 28” — — — — — — — — — — — — — — 28” x 26” — — — — — — — — — — — — — — 28” x 24” — — — — — — — — — — — — — — 28” x 22” — — — — — — — — — — — — — — 28” x 20” — — — — — — — — — — — — — — 28” x 18” — — — — — — — — — — — — — — 28” x 16” — — — — — — — — — — — — — — 28” x 14” — — — — — — — — — — — — — — 28” x 12” — — — — — — — — — — — — — — 30” — — — — — — — — — — — — — — 30” x 28” — — — — — — — — — — — — — — 30” x 26” — — — — — — — — — — — — — — 30” x 24” — — — — — — — — — — — — — — 30” x 22” — — — — — — — — — — — — — — 30” x 20” — — — — — — — — — — — — — — 30” x 18” — — — — — — — — — — — — — — 30” x 16” — — — — — — — — — — — — — — 30” x 14” — — — — — — — — — — — — — — 30” x 12”
31
Tee uguali e ridotti Equal and reducing tees
D d M L NPS SCH. STD SCH. XS SCH. 10 SCH. 20 SCH. 30 SCH. 40 [mm] [mm] [mm] [mm] S S1 S S1 S S1 S S1 S S1 S S1
762,0 273,0 559,0 460,0 30” x 10” 9,52 9,27 12,70 12,70 — — 12,70 6,35 15,88 7,80 — — 812,8 — 597,0 32” 9,52 — 12,70 — 7,92 — 12,70 — 15,88 — 17,45 — 812,8 762,0 584,0 32” x 30” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 15,88 15,88 — — 812,8 711,2 572,0 32” x 28” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 15,88 15,88 — — 812,8 660,0 572,0 32” x 26” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 — — — — 812,8 609,6 559,0 32” x 24” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 14,25 17,45 17,45 812,8 559,0 546,0 32” x 22” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 12,70 — — 812,8 508,0 533,0 32” x 20” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 12,70 17,45 15,06 812,8 457,2 521,0 32” x 18” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 11,12 17,45 14,27 812,8 406,4 508,0 32” x 16” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 9,52 17,45 12,70 812,8 355,6 508,0 32” x 14” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 9,52 17,45 11,12 864,0 — 635,0 34” 9,52 — 12,70 — 7,92 — 12,70 15,88 17,45 — — — 864,0 813,0 622,0 34” x 32” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 15,88 15,88 17,45 17,45 864,0 762,0 610,0 34” x 30” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 15,88 15,88 — — 864,0 711,0 597,0 34” x 28” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 15,88 15,88 — — 864,0 660,0 597,0 34” x 26” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 — — — — 864,0 610,0 584,0 34” x 24” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 14,25 17,45 17,45 864,0 559,0 572,0 34” x 22” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 12,70 — — 864,0 508,0 559,0 34” x 20” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 12,70 17,45 15,06 864,0 457,0 546,0 34” x 18” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 11,12 17,45 14,27 864,0 406,4 533,0 34” x 16” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 7,52 17,45 12,70 914,4 — 673,0 36” 9,52 — 12,70 — 7,92 — 12,70 — 15,88 — 19,05 — 914,4 864,0 660,0 36” x 34” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 15,88 15,88 19,05 17,45 914,4 812,8 648,0 36” x 32” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 15,88 15,88 19,05 17,45 914,4 762,0 635,0 36” x 30” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 15,88 15,88 — — 914,4 711,2 622,0 36” x 28” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 15,88 15,88 — — 914,4 660,0 622,0 36” x 26” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 — — — — 914,4 609,6 610,0 36” x 24” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 14,25 19,05 17,45 914,4 559,0 597,0 36” x 22” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 12,70 — — 914,4 508,0 584,0 36” x 20” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 12,70 19,05 15,06 914,4 457,2 572,0 36” x 18” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 11,12 19,05 14,27 914,4 406,4 559,0 36” x 16” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 9,52 19,05 12,70 965,0 — 711,0 38” 9,52 — 12,70 — — — — — — — — — 965,0 914,0 711,0 38” x 36” 9,52 9,52 12,70 12,70 — — — — — — — — 965,0 864,0 698,0 38” x 34” 9,52 9,52 12,70 12,70 — — — — — — — — 965,0 813,0 686,0 38” x 32” 9,52 9,52 12,70 12,70 — — — — — — — —
597,0
635,0
673,0
711,0
32
Tolleranze dimensionali: pag. 81Pezzi a tee con dimensioni
o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Reducing tees with special
thickness and size: on application (−)
SCH. 60 SCH. 80 SCH. 100 SCH. 120 SCH. 140 SCH. 160 SCH. XXS NPS S S1 S S1 S S1 S S1 S S1 S S1 S S1
— — — — — — — — — — — — — — 30” x 10” — — — — — — — — — — — — — — 32” — — — — — — — — — — — — — — 32” x 30” — — — — — — — — — — — — — — 32” x 28” — — — — — — — — — — — — — — 32” x 26” — — — — — — — — — — — — — — 32” x 24” — — — — — — — — — — — — — — 32” x 22” — — — — — — — — — — — — — — 32” x 20” — — — — — — — — — — — — — — 32” x 18” — — — — — — — — — — — — — — 32” x 16” — — — — — — — — — — — — — — 32” x 14” — — — — — — — — — — — — — — 34” — — — — — — — — — — — — — — 34” x 32” — — — — — — — — — — — — — — 34” x 30” — — — — — — — — — — — — — — 34” x 28” — — — — — — — — — — — — — — 34” x 26” — — — — — — — — — — — — — — 34” x 24” — — — — — — — — — — — — — — 34” x 22” — — — — — — — — — — — — — — 34” x 20” — — — — — — — — — — — — — — 34” x 18” — — — — — — — — — — — — — — 34” x 16” — — — — — — — — — — — — — — 36” — — — — — — — — — — — — — — 36” x 34” — — — — — — — — — — — — — — 36” x 32” — — — — — — — — — — — — — — 36” x 30” — — — — — — — — — — — — — — 36” x 28” — — — — — — — — — — — — — — 34” x 26” — — — — — — — — — — — — — — 36” x 24” — — — — — — — — — — — — — — 34” x 22” — — — — — — — — — — — — — — 36” x 20” — — — — — — — — — — — — — — 36” x 18” — — — — — — — — — — — — — — 36” x 16” — — — — — — — — — — — — — — 38” — — — — — — — — — — — — — — 38” x 36” — — — — — — — — — — — — — — 38” x 34” — — — — — — — — — — — — — — 38” x 32”
33
Tee uguali e ridotti Equal and reducing tees
D d M L NPS SCH. STD SCH. XS SCH. 10 SCH. 20 SCH. 30 SCH. 40 [mm] [mm] [mm] [mm] S S1 S S1 S S1 S S1 S S1 S S1
965,0 762,0 673,0 38” x 30” 9,52 9,52 12,70 12,70 — — — — — — — — 965,0 711,0 648,0 38” x 28” 9,52 9,52 12,70 12,70 — — — — — — — — 965,0 660,0 648,0 38” x 26” 9,52 9,52 12,70 12,70 — — — — — — — — 965,0 610,0 635,0 38” x 24” 9,52 9,52 12,70 12,70 — — — — — — — — 965,0 559,0 622,0 38” x 22” 9,52 9,52 12,70 12,70 — — — — — — — — 965,0 508,0 610,0 38” x 20” 9,52 9,52 12,70 12,70 — — — — — — — — 965,0 457,0 597,0 38” x 18” 9,52 9,52 12,70 12,70 — — — — — — — — 1016,0 — 749,0 40” 9,52 — 12,70 — — — — — — — — — 1016,0 965,0 749,0 40” x 38” 9,52 9,52 12,70 12,70 — — — — — — — — 1016,0 914,4 737,0 40” x 36” 9,52 9,52 12,70 12,70 — — — — — — — — 1016,0 864,0 724,0 40” x 34” 9,52 9,52 12,70 12,70 — — — — — — — — 1016,0 812,8 711,0 40” x 32” 9,52 9,52 12,70 12,70 — — — — — — — — 1016,0 762,0 698,0 40” x 30” 9,52 9,52 12,70 12,70 — — — — — — — — 1016,0 711,2 673,0 40” x 28” 9,52 9,52 12,70 12,70 — — — — — — — — 1016,0 660,0 673,0 40” x 26” 9,52 9,52 12,70 12,70 — — — — — — — — 1016,0 609,6 660,0 40” x 24” 9,52 9,52 12,70 12,70 — — — — — — — — 1016,0 559,0 648,0 40” x 22” 9,52 9,52 12,70 12,70 — — — — — — — — 1016,0 508,0 635,0 40” x 20” 9,52 9,52 12,70 12,70 — — — — — — — — 1016,0 457,0 622,0 40” x 18” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 — 711,0 42” 9,52 — 12,70 — — — — — — — — — 1066,8 1016,0 711,0 42” x 40” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 965,0 711,0 42” x 38” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 914,4 711,0 42” x 36” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 864,0 711,0 42” x 34” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 812,8 711,0 42” x 32” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 762,0 711,0 42” x 30” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 711,2 698,0 42” x 28” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 660,0 698,0 42” x 26” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 609,6 660,0 42” x 24” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 559,0 660,0 42” x 22” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 508,0 660,0 42” x 20” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 457,0 648,0 42” x 18” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 406,4 635,0 42” x 16” 9,52 9,52 12,70 12,70 — — — — — — — — 1118,0 — 762,0 44” 9,52 — 12,70 — — — — — — — — — 1118,0 1067,0 762,0 44” x 42” 9,52 9,52 12,70 12,70 — — — — — — — — 1118,0 1016,0 749,0 44” x 40” 9,52 9,52 12,70 12,70 — — — — — — — —
711,0
749,0
762,0
813,0
34
Tolleranze dimensionali: pag. 81Pezzi a tee con dimensioni
o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Reducing tees with special
thickness and size: on application (−)
SCH. 60 SCH. 80 SCH. 100 SCH. 120 SCH. 140 SCH. 160 SCH. XXS NPS S S1 S S1 S S1 S S1 S S1 S S1 S S1
— — — — — — — — — — — — — — 38” x 30” — — — — — — — — — — — — — — 38” x 28” — — — — — — — — — — — — — — 38” x 26” — — — — — — — — — — — — — — 38” x 24” — — — — — — — — — — — — — — 38” x 22” — — — — — — — — — — — — — — 38” x 20” — — — — — — — — — — — — — — 38” x 18” — — — — — — — — — — — — — — 40” — — — — — — — — — — — — — — 40” x 38” — — — — — — — — — — — — — — 40” x 36” — — — — — — — — — — — — — — 40” x 34” — — — — — — — — — — — — — — 40” x 32” — — — — — — — — — — — — — — 40” x 30” — — — — — — — — — — — — — — 40” x 28” — — — — — — — — — — — — — — 40” x 26” — — — — — — — — — — — — — — 40” x 24” — — — — — — — — — — — — — — 40” x 22” — — — — — — — — — — — — — — 40” x 20” — — — — — — — — — — — — — — 40” x 18” — — — — — — — — — — — — — — 42” — — — — — — — — — — — — — — 42” x 40” — — — — — — — — — — — — — — 42” x 38” — — — — — — — — — — — — — — 42” x 36” — — — — — — — — — — — — — — 42” x 34” — — — — — — — — — — — — — — 42” x 32” — — — — — — — — — — — — — — 42” x 30” — — — — — — — — — — — — — — 42” x 28” — — — — — — — — — — — — — — 42” x 26” — — — — — — — — — — — — — — 42” x 24” — — — — — — — — — — — — — — 42” x 22” — — — — — — — — — — — — — — 42” x 20” — — — — — — — — — — — — — — 42” x 18” — — — — — — — — — — — — — — 42” x 16” — — — — — — — — — — — — — — 44” — — — — — — — — — — — — — — 44” x 42” — — — — — — — — — — — — — — 44” x 40”
35
Tee uguali e ridotti Equal and reducing tees
36
Tolleranze dimensionali: pag. 81Pezzi a tee con dimensioni
o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Reducing tees with special
thickness and size: on application (−)
D d M L NPS SCH. STD SCH. XS SCH. 10 SCH. 20 SCH. 30 SCH. 40 [mm] [mm] [mm] [mm] S S1 S S1 S S1 S S1 S S1 S S1
1118,0 965,0 737,0 44” x 38” 9,52 9,52 12,70 12,70 — — — — — — — — 1118,0 914,0 724,0 44” x 36” 9,52 9,52 12,70 12,70 — — — — — — — — 1118,0 864,0 724,0 44” x 34” 9,52 9,52 12,70 12,70 — — — — — — — — 1118,0 813,0 711,0 44” x 32” 9,52 9,52 12,70 12,70 — — — — — — — — 1118,0 762,0 711,0 44” x 30” 9,52 9,52 12,70 12,70 — — — — — — — — 1118,0 711,0 698,0 44” x 28” 9,52 9,52 12,70 12,70 — — — — — — — — 1118,0 660,0 698,0 44” x 26” 9,52 9,52 12,70 12,70 — — — — — — — — 1118,0 610,0 698,0 44” x 24” 9,52 9,52 12,70 12,70 — — — — — — — — 1118,0 559,0 686,0 44” x 22” 9,52 9,52 12,70 12,70 — — — — — — — — 1118,0 508,0 686,0 44” x 20” 9,52 9,52 12,70 12,70 — — — — — — — — 1168,0 — 800,0 46” 9,52 — 12,70 — — — — — — — — — 1168,0 1118,0 800,0 46” x 44” 9,52 9,52 12,70 12,70 — — — — — — — — 1168,0 1067,0 787,0 46” x 42” 9,52 9,52 12,70 12,70 — — — — — — — — 1168,0 1016,0 775,0 46” x 40” 9,52 9,52 12,70 12,70 — — — — — — — — 1168,0 965,0 762,0 46” x 38” 9,52 9,52 12,70 12,70 — — — — — — — — 1168,0 914,0 762,0 46” x 36” 9,52 9,52 12,70 12,70 — — — — — — — — 1168,0 864,0 749,0 46” x 34” 9,52 9,52 12,70 12,70 — — — — — — — — 1168,0 813,0 749,0 46” x 32” 9,52 9,52 12,70 12,70 — — — — — — — — 1168,0 762,0 737,0 46” x 30” 9,52 9,52 12,70 12,70 — — — — — — — — 1168,0 711,0 737,0 46” x 28” 9,52 9,52 12,70 12,70 — — — — — — — — 1168,0 660,0 737,0 46” x 26” 9,52 9,52 12,70 12,70 — — — — — — — — 1168,0 610,0 724,0 46” x 24” 9,52 9,52 12,70 12,70 — — — — — — — — 1168,0 559,0 724,0 46” x 22” 9,52 9,52 12,70 12,70 — — — — — — — — 1219,0 — 838,0 48” 9,52 — 12,70 — — — — — — — — — 1219,0 1168,0 838,0 48” x 46” 9,52 9,52 12,70 12,70 — — — — — — — — 1219,0 1188,0 838,0 48” x 44” 9,52 9,52 12,70 12,70 — — — — — — — — 1219,0 1067,0 813,0 48” x 42” 9,52 9,52 12,70 12,70 — — — — — — — — 1219,0 1016,0 813,0 48” x 40” 9,52 9,52 12,70 12,70 — — — — — — — — 1219,0 965,0 813,0 48” x 38” 9,52 9,52 12,70 12,70 — — — — — — — — 1219,0 914,0 787,0 48” x 36” 9,52 9,52 12,70 12,70 — — — — — — — — 1219,0 864,0 787,0 48” x 34” 9,52 9,52 12,70 12,70 — — — — — — — — 1219,0 813,0 787,0 48” x 32” 9,52 9,52 12,70 12,70 — — — — — — — — 1219,0 762,0 762,0 48” x 30” 9,52 9,52 12,70 12,70 — — — — — — — — 1219,0 711,0 762,0 48” x 28” 9,52 9,52 12,70 12,70 — — — — — — — — 1219,0 660,0 762,0 48” x 26” 9,52 9,52 12,70 12,70 — — — — — — — — 1219,0 610,0 737,0 48” x 24” 9,52 9,52 12,70 12,70 — — — — — — — — 1219,0 559,0 737,0 48” x 22” 9,52 9,52 12,70 12,70 — — — — — — — —
813,0
851,0
889,0
37
SCH. 60 SCH. 80 SCH. 100 SCH. 120 SCH. 140 SCH. 160 SCH. XXS NPS S S1 S S1 S S1 S S1 S S1 S S1 S S1
— — — — — — — — — — — — — — 44” x 38” — — — — — — — — — — — — — — 44” x 36” — — — — — — — — — — — — — — 44” x 34” — — — — — — — — — — — — — — 44” x 32” — — — — — — — — — — — — — — 44” x 30” — — — — — — — — — — — — — — 44” x 28” — — — — — — — — — — — — — — 44” x 26” — — — — — — — — — — — — — — 44” x 24” — — — — — — — — — — — — — — 44” x 22” — — — — — — — — — — — — — — 44” x 20” — — — — — — — — — — — — — — 46” — — — — — — — — — — — — — — 46” x 44” — — — — — — — — — — — — — — 46” x 42” — — — — — — — — — — — — — — 46” x 40” — — — — — — — — — — — — — — 46” x 38” — — — — — — — — — — — — — — 46” x 36” — — — — — — — — — — — — — — 46” x 34” — — — — — — — — — — — — — — 46” x 32” — — — — — — — — — — — — — — 46” x 30” — — — — — — — — — — — — — — 46” x 28” — — — — — — — — — — — — — — 46” x 26” — — — — — — — — — — — — — — 46” x 24” — — — — — — — — — — — — — — 46” x 22” — — — — — — — — — — — — — — 48 ” — — — — — — — — — — — — — — 48” x 46” — — — — — — — — — — — — — — 48” x 44” — — — — — — — — — — — — — — 48” x 42” — — — — — — — — — — — — — — 48” x 40” — — — — — — — — — — — — — — 48” x 38” — — — — — — — — — — — — — — 48” x 36” — — — — — — — — — — — — — — 48” x 34” — — — — — — — — — — — — — — 48” x 32” — — — — — — — — — — — — — — 48” x 30” — — — — — — — — — — — — — — 48” x 28” — — — — — — — — — — — — — — 48” x 26” — — — — — — — — — — — — — — 48” x 24” — — — — — — — — — — — — — — 48” x 22”
Pesi [kg] Weights
Tolleranze dimensionali: pag. 81Pezzi a tee con dimensioni
o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Reducing tees with special
thickness and size: on application (−)
D M NPS S = SCHEDULE [mm] [mm] SERIES STD XS 10 20 30 40 60 80 100 120 140 160 XXS 21,3 25,4 1/2” 0,10 0,16 — — — 0,10 — 0,16 — — — 0,25 0,30 26,7 28,5 3/4” 0,16 0,22 — — — 0,16 — 0,22 — — — 0,35 0,45 33,4 38,1 1” 0,36 0,47 — — — 0,36 — 0,47 — — — 0,70 0,80 42,2 47,6 11/4” 0,50 0,70 — — — 0,50 — 0,70 — — — 1,00 1,20 48,3 57,1 11/2” 0,70 0,90 — — — 0,70 — 0,90 — — — 1,50 1,80 60,3 63,5 2” 1,00 1,40 — — — 1,00 — 1,40 — — — 2,50 3,00 73,0 76,2 21/2” 1,80 2,20 — — — 1,80 — 2,20 — — — 4,00 6,00 88,9 85,7 3” 2,70 3,00 — — — 2,70 — 3,00 — — — 6,00 8,00 101,6 95,2 31/2” 3,55 4,89 — — — 3,55 — 4,89 — — — 8,00 11,00 114,3 104,8 4” 4,40 6,40 — — — 4,40 — 6,40 — — — 10,00 13,00 141,3 142,8 5” 7,00 9,30 — — — 7,00 — 9,30 — — — 20,00 24,00 168,3 142,8 6” 10,00 15,00 — — — 10,00 — 15,00 — — — 25,00 30,00 219,1 177,8 8” 19,00 28,90 — — — 19,00 — 28,90 — — — 52,00 52,00 273,0 215,9 10” 30,00 48,00 — — — 30,00 — 52,00 — — — 88,00 95,00 323,8 254,0 12” 47,00 77,00 — — — 49,00 — 90,00 — — — 145,0 130,0 355,6 279,4 14” 60,00 95,00 — — — 85,00 — 125,0 — — — 270,0 — 406,4 304,9 16” 75,00 103,0 — — — 103,0 — 195,0 — — — 360,0 — 457,2 342,9 18” 105,0 125,0 — — — 170,0 — 235,0 — — — 500,0 — 508,0 381,0 20” 125,0 160,0 — — — 250,0 — 330,0 — — — 680,0 — 558,8 419,1 22” 165,0 205,0 — — — 300,0 — 490,0 — — — 1130,0 — 609,6 431,8 24” 185,0 235,0 — — — 330,0 — 550,0 — — — 1160,0 — 660,4 495,3 26” 250,0 320,0 — — — — — — — — — — — 711,2 520,7 28” 300,0 380,0 — — — — — — — — — — — 762,0 559,0 30” 345,0 435,0 — — — — — — — — — — — 812,8 597,0 32” 410,0 500,0 — — — — — — — — — — — 864,0 813,0 34” 460,0 580,0 — — — — — — — — — — — 914,4 673,0 36” 520,0 650,0 — — — — — — — — — — — 965,0 711,0 38” — — — — — — — — — — — — — 1016,0 749,0 40” — — — — — — — — — — — — — 1066,8 762,0 42” — — — — — — — — — — — — — 1118,0 813,0 44” — — — — — — — — — — — — — 1168,0 851,0 46” — — — — — — — — — — — — — 1219,0 889,0 48” — — — — — — — — — — — — —
38
Weights of Reducing Tees: see Equal Tees
Tee barrati * Barred tees *
39
Secondo gli standard: According to:
• ASME B31.1 - POWER PIPING
• ASME B31.3 - PROCESS PIPING
• ASME B31.4 - LIQUID & SLURRY PIPING TRANSPORTATION SYSTEM
• ASME B31.8 - GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
* Numero e configurazione barre da definire prima dell’ordine* Bar number and configuration to be defined before the order
Calculation of reinforcementof straight tee and extruded outlet
According to ASME B31.8478,6 x 14” WT 25,0 / 15,88 MSS SP-75 WPHY65 478,6 x 12” WT 25,0 / 15,88 MSS SP-75 WPHY65
14” x 12” WT 15,88 / 15,88 MSS SP-75 WPHY65Ref. para. 831.6, appendix F fig. F-3
40
478,6 x 14” WT 25,0/ 15,88
478,6 x 12”WT 25,0/ 15,88
14” x 12”WT 15,88
/ 15,881) DESIGN DATADesign PressureDesign TemperatureCorrosion AllowanceDesign FactorLongitudinal Joint FactorTemperature Derating Factor2) MATERIAL DATAMaterial GradeMinimum Yield Stress3) DIMENSIONAL DATARun Outside Diameter at BevelBranch Outside Diameter at Bevel Minimum Required Thickness of RunMinimum Required Thickness of BranchRun Used Thickness
Branch Used Thickness
Half lenght of Tee if Less than r1Branch Thickness at Height ro4) VERIFICATION OF COMPENSATIONMinimum Calculated Thickness of RunMinimum Calculated Thickness of BranchCoefficient “K”Branch Corroded Internal DiameterHalf Width of Reinforcement ZoneHeight of Reinforcement Zone
Radius of Curvature of OutletRequired Reinforcement AreaAvailable Reinforcement Area in HeaderAvailable Reinforcement Area in BranchAvailable Reinforcement Area in Branch LipTotal Reinforcement AreaEfficency Factor
TA > A - REINFORCED AREA IS SUFFICIENT
PDTcFET
S
DhDb
Th
Tb
CTo
thtbKDor1LLroAA1A2A3TAf
N/mm2
°CmmFET
N/mm2
mmmmmmmmmm
mm
mmmm
mmmm
mmmmmmmmmmmm2
mm2
mm2
mm2
mm2
13,50-46/755,000,50 1,001,00
WPHY 65450,00
478,60355,6025,0015,8823,00 + c = 28,00
16,00 + c = 21,00
340,0033,00 = Tb
14,3610,671,00323,60323,6052,8052,0044,0046462797555149648471,043
13,50-46/755,000,50 1,001,00
WPHY 65450,00
478,60323,8025,0015,8823,00+ c = 28,00
16,00 + c = 21,00
340,0033,00 = Tb
14,369,711,00291,80291,8050,3850,0040,0041902522629136045101,077
13,50-46/755,000,50 1,001,00
WPHY 65450,00
355,60323,9015,8815,8818,00+ c = 23,00
18,00 + c = 23,00
275,0023,00 = Tb
10,679,721,00287,90275,0053,4550,0040,003071192282840031501,026
from table 841.1.6-1
from table 841.1.7-1
from table 841.1.8-1
for reference only
for reference only
= (P Dh) / 2 (S T E F)
= (P Db) / 2 (S T E F)
= Db / Dh > 0,6
= Db - (2 Tb)
= 0,7 √ (Db Tb)
used for calcuation
= 1 / 8 Db
= K th Do
= (2 r1 - Do) (Th - th)
2 L (Tb - tb)
2 ro (To - Tb)
A1 + A2 + A3
TA / A
======
==
=====
=
==
==============
Tee barrati Barred tees
Item: BAR. TEE 478,6 x 14” WT. 25 / 15,88 Material: MSS SP-75 WPHY 65
Appl. Std. MSS Sp-75 / PTS 31.40.21.30
Bars Material: ASTM A516 gr.70 or equivalentt = 12mm h = 50 mm
Pig. Passage: 97% Nominal Int. Diam.
41
Det. F
0,75 t
t
fullpenetration
Sect. C:CC
C
F
E E
B
A
M M
LSect. E:E
t
guidebars all s mer srenroc prah oved
t
D d
id
1,6 ± 0,8
S1ID
1,6 ± 0,8
S
37,5°± 2,5°
10°± 2,5°
30°max
30°max
18°max
18°max
19 ± 2Detail “A” Detail “B”
37,5°± 2,5°
44
Design calculation for lateral tees According to ASME B31.3
Lateral tee 4” x 4” STD ASTM A234 WPB-WLateral tee 4” x 3” STD ASTM A234 WPB-W Lateral tee 4” x 2” STD ASTM A234 WPB-W
Ref. para. 304.3.3 fig. 304.3.3
t. A1 of ASME B31.3
acc. to par. 302.3.5(e)
C included
C included
(pad)
= P Dh / (2*(SEW + PY))
= P Db / (2*(SEW + PY))
= 2,5 (Tb - c) + Tr
= Required Area
= Reinf. Area
= Reinf. Area
not considered
= A2 + A3 + A4
1) DESIGN DATADesign PressureDesign TemperatureDesign FactorAllowable Stress at Design TemperatureCorrosion AllowanceWeld joint strenght reduction factor2) MATERIAL DATAJoint FactorSin of “Smaller angle between axes of branch and run” (β = 45°)3) DIMENSIONAL DATAOutside Diameter of the RunWall Thickness at Bevel of the Run Outside Diameter of the BranchWall Thickness at Bevel of the BranchMinimum Required Thickness of RunMinimum Required Thickness of BranchInside Diameter of Welded OutletHalf Width of Reinforcement ZoneMinimum Thickness of Reinforcement ring4) CALCULATIONMinimum Required Thickness of the RunMinimum Required Thickness of the BranchHeight of the Reinforcement ZoneRequired AreaReinforcement Area 2Reinforcement Area 3Reinforcement Area 4Total Reinforcement Area
REINFORCEMENT PAD NOT REQUIRED
4”X 4” STD ASTM A234
WPB-W
4”X 3” STD ASTM A234
WPB-W
4”X 2” STD ASTM A234
WPB-W
PT YSCW
Esin β
DhWT1DbWT2ThTbd1d2Tr
thtbL4A1A2A3A4TA
MPa°F
N/mm2
mm
mmmmmmmmmmmmmmmmmm
mmmmmmmm2
mm2
mm2
mm2
mm2
0,833720,4148,91,271
10,707
114,36,02114,36,025,275,27150,35114,30
0,320,3210,0061,793777288,11104,16 392,28 (> A1)
0,833720,4148,91,271
10,707
114,36,0288,95,495,274,80115,76114,30
0,320,258,8347,574814415,5181,95 497,46 (> A1)
0,833720,4148,91,271
10,707
114,36,0260,33,915,273,4279,2079,200
0,320,175,3832,550148291,6330,23 321,86 (> A1)
======
==
=========
========
45
Tee laterali Lateral tees
Item: Lateral tee 4” x 4” SCH 80 mach.ed to STD Material: fabricated from Seamless Pipe ASTM A106 Gr.B
ASME B31.3 - 2010 Appl. Std. ANSI / ASME B16.25 - 2007
weld 100% RT (ASME V)without added reinforcement
B
45°
YZ
X
A
D / dD
ID ID / id
1,6 ± 0,8 1,6 ± 0,8
Detail “A” Detail “B”
S / S1S
37,5°± 2,5°
37,5°± 2,5°
30°max
30°max
18°max
18°max
46
Tee laterali Lateral tees
XYOD Z[mm] [mm] [mm]
SCH.STD
SCH.XS
SCH. 10
SCH. 20
SCH. 30
SCH. 40
SCH. 60
SCH. 80
SCH. 100
SCH. 120
SCH. 140
SCH. 160
SCH. XXS NPS
21,3 88,9 50,8 1/2” 26,7 107,95 50,8 3/4” 33,4 133,35 50,8 1” 42,2 184,17 57,15 11/4” 48,3 215,9 63,5 11/2” 60,3 228,6 63,5 2” 73,0 266,7 63,5 21/2” 88,9 279,4 76,2 3” 101,6 279,4 76,2 31/2” 114,3 342,9 76,2 4” 141,3 381,0 88,9 5” 168,3 444,5 101,6 6” 219,1 520,7 127,0 8” 273,0 609,6 139,7 10” 323,8 698,5 152,4 12” 355,6 787,4 165,1 14” 406,4 876,3 177,8 16” 457,2 952,5 203,2 18” 508,0 1028,7 215,9 20” 558,8 1111,5 228,6 22” 609,6 1205,5 254,0 24” 660,4 1308,1 266,7 26” 711,2 1422,4 286,0 28” 762,0 1524,0 298,5 30” 812,8 1625,8 311,4 32” 863,6 1727,2 330,2 34” 914,4 1828,8 349,5 36” 965,2 1930,4 368,5 38” 1016,0 2032,0 387,5 40” 1066,8 2133,6 406,5 42” 1118,0 2235,2 425,5 44” 1168,4 2336,8 444,5 46” 1219,2 2438,4 463,5 48”
2,772,873,383,563,683,915,165,495,746,026,557,118,189,279,529,529,529,529,529,529,529,529,529,529,529,529,529,529,529,529,529,529,52
3,733,914,554,855,085,547,017,628,088,569,5210,9712,7012,7012,7012,7012,7012,7012,7012,7012,7012,7012,7012,7012,7012,7012,7012,7012,7012,7012,7012,7012,70
———————————————
6,356,356,356,356,356,357,927,927,927,927,927,92——————
————————————
6,356,356,357,927,927,929,529,529,5212,7012,7012,7012,7012,7012,70
——————
————
3,183,184,784,784,784,78——
7,047,808,389,529,5211,1212,7012,7014,25
—15,8815,8815,8815,8815,88
——————
2,77 2,873,383,563,683,915,165,495,746,026,557,118,189,27
10,3111,1212,7014,2715,06
—17,45
———
17,4517,4519,05
——————
————————————
10,3012,7014,3015,1016,7019,0520,6022,2324,60
————————————
3,733,914,554,855,085,547,017,628,088,569,52
10,9712,7015,0617,4519,0521,4123,8026,1928,5830,94
————————————
————————————
15,0618,2421,4123,8026,1929,3632,5434,9338,89
————————————
—————————
11,1212,7014,2718,2421,4125,4027,7630,9434,9238,1041,2846,02
————————————
————————————
20,6225,4028,5731,7536,5239,6744,4547,6352,37
————————————
4,755,546,356,357,148,749,5211,12
—13,4915,8718,2423,0128,5733,3235,7140,4645,2449,9953,9859,51
————————————
7,477,829,099,7010,1611,0714,0215,24
—17,1219,0521,9422,2225,4025,40
——————————————————
B B
45° 45°NPS
NPS
Z Y Z Y
X X
A A
Riduzioni concentricheed eccentriche
Concentric and eccentric reducers
48
NPS SCH. STD SCH. XS SCH. 10 SCH. 20 SCH. 30 SCH. 40 S S1 S S1 S S1 S S1 S S1 S S1
26,7 21,3 3/4” x 1/2” 2,87 2,77 3,91 3,73 — — — — — — 2,87 2,77 26,7 17,3 3/4” x 3/8” 2,87 2,31 3,91 3,20 — — — — — — 2,87 2,31 33,4 26,7 1” x 3/4” 3,38 2,87 4,55 3,91 — — — — — — 3,38 2,87 33,4 21,3 1” x 1/2” 3,38 2,77 4,55 3,73 — — — — — — 3,38 2,77 42,2 33,4 11/4” x 1” 3,56 3,38 4,85 4,55 — — — — — — 3,56 3,38 42,2 26,7 11/4” x 3/4” 3,56 2,87 4,85 3,91 — — — — — — 3,56 2,87 42,2 21,3 11/4” x 1/2” 3,56 2,77 4,85 3,73 — — — — — — 3,56 2,77 48,3 42,2 11/2” x 11/4” 3,68 3,56 5,08 4,85 — — — — — — 3,68 3,56 48,3 33,4 11/2” x 1” 3,68 3,38 5,08 4,55 — — — — — — 3,68 3,38 48,3 26,7 11/2” x 3/4” 3,68 2,87 5,08 3,91 — — — — — — 3,68 2,87 48,3 21,3 11/2” x 1/2” 3,68 2,77 5,08 3,73 — — — — — — 3,68 2,77 60,3 48,3 2” x 11/2” 3,91 3,68 5,54 5,08 — — — — 3,18 3,18 3,91 3,68 60,3 42,2 2” x 11/4” 3,91 3,56 5,54 4,85 — — — — — — 3,91 3,56 60,3 33,4 2” x 1” 3,91 3,38 5,54 4,55 — — — — — — 3,91 3,38 60,3 26,7 2” x 3/4” 3,91 2,87 5,54 3,91 — — — — — — 3,91 2,87 60,3 21,3 2” x 1/2” 3,91 2,77 5,54 3,73 — — — — — — 3,91 2,77 73,0 60,3 21/2” x 2” 5,16 3,91 7,01 5,54 — — — — 4,78 3,18 5,16 3,91 73,0 48,3 21/2” x 11/2” 5,16 3,68 7,01 5,08 — — — — 4,78 3,18 5,16 3,68 73,0 42,2 21/2” x 11/4” 5,16 3,56 7,01 4,85 — — — — — — 5,16 3,56 73,0 33,4 21/2” x 1” 5,16 3,38 7,01 4,55 — — — — — — 5,16 3,38 88,9 73,0 3” x 21/2” 5,49 5,16 7,62 7,01 — — — — 4,78 4,78 5,49 5,16 88,9 60,3 3” x 2” 5,49 3,91 7,62 5,54 — — — — 4,78 3,18 5,49 3,91 88,9 48,3 3” x 11/2” 5,49 3,68 7,62 5,08 — — — — 4,78 3,18 5,49 3,68 88,9 42,2 3” x 11/4” 5,49 3,56 7,62 4,85 — — — — — — 5,49 3,56 88,9 33,4 3” x 1” 5,49 3,38 7,62 4,55 — — — — — — 5,49 3,38 101,6 88,9 31/2” x 3” 5,74 5,49 8,08 7,62 — — — — 4,78 4,78 5,74 5,49 101,6 73,0 31/2” x 21/2” 5,74 5,16 8,08 7,01 — — — — 4,78 4,78 5,74 5,16 101,6 60,3 31/2” x 2” 5,74 3,91 8,08 5,54 — — — — 4,78 3,18 5,74 3,91 101,6 48,3 31/2” x 11/2” 5,74 3,68 8,08 5,08 — — — — 4,78 3,18 5,74 3,68 101,6 42,2 31/2” x 11/4” 5,74 3,56 8,08 4,85 — — — — — — 5,74 3,56 114,3 101,6 4” x 31/2” 6,02 5,74 8,56 8,08 — — — — 4,78 4,78 6,02 5,74 114,3 88,9 4” x 3” 6,02 5,49 8,56 7,62 — — — — 4,78 4,78 6,02 5,49 114,3 73,0 4” x 21/2” 6,02 5,16 8,56 7,01 — — — — 4,78 4,78 6,02 5,16 114,3 60,3 4” x 2” 6,02 3,91 8,56 5,54 — — — — 4,78 3,18 6,02 3,91 114,3 48,3 4” x 11/2” 6,02 3,68 8,56 5,08 — — — — 4,78 3,18 6,02 3,68 114,3 42,2 4” x 11/4” 6,02 3,56 8,56 4,85 — — — — — — 6,02 3,56
dD H[mm] [mm] [mm]
38,0
51,0
64,0
76,0
89,0
89,0
102,0
102,0
Tolleranze dimensionali: pag. 81Riduzioni con dimensioni o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Reducers with special thickness and size: on application (−)
49
SCH. 60 SCH. 80 SCH. 100 SCH. 120 SCH. 140 SCH. 160 SCH. XXS NPS S S1 S S1 S S1 S S1 S S1 S S1 S S1
— — 3,91 3,73 — — — — — — 5,54 4,75 7,82 7,47 3/4” x 1/2”
— — 3,91 3,20 — — — — — — — — — — 3/4” x 3/8”
— — 4,55 3,91 — — — — — — 6,35 5,54 9,09 7,82 1” x 3/4”
— — 4,55 3,73 — — — — — — 6,35 4,75 9,09 7,47 1” x 1/2”
— — 4,85 4,55 — — — — — — 6,35 6,35 9,70 9,09 11/4” x 1” — — 4,85 3,91 — — — — — — 6,35 5,54 9,70 7,82 11/4” x 3/4” — — 4,85 3,73 — — — — — — 6,35 4,75 9,70 7,47 11/4” x 1/2” — — 5,08 4,85 — — — — — — 7,14 6,35 10,16 9,70 11/2” x 11/4” — — 5,08 4,55 — — — — — — 7,14 6,35 10,16 9,09 11/2” x 1” — — 5,08 3,91 — — — — — — 7,14 5,54 10,16 7,82 11/2” x 3/4” — — 5,08 3,73 — — — — — — 7,14 4,75 10,16 7,47 11/2” x 1/2” — — 5,54 5,08 — — — — — — 8,74 7,14 11,07 10,16 2” x 11/2” — — 5,54 4,85 — — — — — — 8,74 6,35 11,07 9,70 2” x 11/4” — — 5,54 4,55 — — — — — — 8,74 6,35 11,07 9,09 2” x 1” — — 5,54 3,91 — — — — — — 8,74 5,54 11,07 7,82 2” x 3/4” — — 5,54 3,73 — — — — — — 8,74 4,75 11,07 7,47 2” x 1/2” — — 7,01 5,54 — — — — — — 9,52 8,74 14,02 11,07 21/2” x 2” — — 7,01 5,08 — — — — — — 9,52 7,14 14,02 10,16 21/2” x 11/2” — — 7,01 4,85 — — — — — — 9,52 6,35 14,02 9,70 21/2” x 11/4” — — 7,01 4,55 — — — — — — 9,52 6,35 14,02 9,09 21/2” x 1” — — 7,62 7,01 — — — — — — 11,12 9,52 15,24 14,02 3” x 21/2” — — 7,62 5,54 — — — — — — 11,12 8,74 15,24 11,07 3” x 2” — — 7,62 5,08 — — — — — — 11,12 7,14 15,24 10,16 3” x 11/2” — — 7,62 4,85 — — — — — — 11,12 6,35 15,24 9,70 3” x 11/4” — — 7,62 4,55 — — — — — — 11,12 6,35 15,24 9,09 3” x 1” — — 8,08 7,62 — — — — — — — — — — 31/2” x 3” — — 8,08 7,01 — — — — — — — — — — 31/2” x 21/2” — — 8,08 5,54 — — — — — — — — — — 31/2” x 2” — — 8,08 5,08 — — — — — — — — — — 31/2” x 11/2” — — 8,08 4,85 — — — — — — — — — — 31/2” x 11/4” — — 8,56 8,08 — — — — — — — — — — 4” x 31/2” — — 8,56 7,62 — — — — — — 13,49 11,12 17,12 15,24 4” x 3” — — 8,56 7,01 — — — — — — 13,49 9,52 17,12 14,02 4” x 21/2” — — 8,56 5,54 — — — — — — 13,49 8,74 17,12 11,07 4” x 2” — — 8,56 5,08 — — — — — — 13,49 7,14 17,12 10,16 4” x 11/2” — — 8,56 4,85 — — — — — — 13,49 6,35 17,12 9,70 4” x 11/4”
50
Riduzioni concentricheed eccentriche
Concentric and eccentric reducers
D d H NPS SCH.STD SCH.XS SCH. 10 SCH.20 SCH.30 SCH.40 S S1 S S1 S S1 S S1 S S1 S S1
114,3 33,4 102,0 4” x 1” 6,02 3,38 8,56 4,55 — — — — — — 6,02 3,38
141,3 114,3 5” x 4” 6,55 6,02 9,52 8,56 — — — — — — 6,55 6,02 141,3 101,6 5” x 31/2” 6,55 5,74 9,52 8,08 — — — — — — 6,55 5,74 141,3 88,9 5” x 3” 6,55 5,49 9,52 7,62 — — — — — — 6,55 5,49 141,3 73,0 5” x 21/2” 6,55 5,16 9,52 7,01 — — — — — — 6,55 5,16 141,3 60,3 5” x 2” 6,55 3,91 9,52 5,54 — — — — — — 6,55 3,91 168,3 141,3 6” x 5” 7,11 6,55 10,97 9,52 — — — — — — 7,11 6,55 168,3 114,3 6” x 4” 7,11 6,02 10,97 8,56 — — — — — — 7,11 6,02 168,3 101,6 6” x 31/2” 7,11 5,74 10,97 8,08 — — — — — — 7,11 5,74 168,3 88,9 6” x 3” 7,11 5,49 10,97 7,62 — — — — — — 7,11 5,49 168,3 73,0 6” x 21/2” 7,11 5,16 10,97 7,01 — — — — — — 7,11 5,16 168,3 60,3 6” x 2” 7,11 3,91 10,97 5,54 — — — — — — 7,11 3,91 219,1 168,3 8” x 6” 8,18 7,11 12,70 10,97 — — — — — — 8,18 7,11 219,1 141,3 8” x 5” 8,18 6,55 12,70 9,52 — — — — — — 8,18 6,55 219,1 114,3 152,0 8” x 4” 8,18 6,02 12,70 8,56 — — — — 7,04 4,78 8,18 6,02 219,1 101,6 8” x 31/2” 8,18 5,74 12,70 8,08 — — — — 7,04 4,78 8,18 5,74 219,1 88,9 8” x 3” 8,18 5,49 12,70 7,62 — — — — 7,04 4,78 8,18 5,49 273,0 219,1 10” x 8” 9,27 8,18 12,70 12,70 — — 6,35 6,35 7,80 7,04 9,27 8,18 273,0 168,3 10” x 6” 9,27 7,11 12,70 10,97 — — — — — — 9,27 7,11 273,0 141,3 10” x 5” 9,27 6,55 12,70 9,52 — — — — — — 9,27 6,55 273,0 114,3 10” x 4” 9,27 6,02 12,70 8,56 — — — — 7,80 4,78 9,27 6,02 323,8 273,0 12” x 10” 9,52 9,27 12,70 12,70 — — 6,35 6,35 8,38 7,80 10,31 9,27 323,8 219,1 12” x 8” 9,52 8,18 12,70 12,70 — — 6,35 6,35 8,38 7,04 10,31 8,18 323,8 168,3 12” x 6” 9,52 7,11 12,70 10,97 — — — — — — 10,31 7,11 323,8 141,3 12” x 5” 9,52 6,55 12,70 9,52 — — — — — — 10,31 6,55 323,8 114,3 12” x 4” 9,52 6,02 12,70 8,56 — — — — 8,38 4,78 10,31 6,02 355,6 323,8 14” x 12” 9,52 9,52 12,70 12,70 — — 7,92 6,35 9,52 8,38 11,12 10,31 355,6 273,0 14” x 10” 9,52 9,27 12,70 12,70 — — 7,92 6,35 9,52 7,80 11,12 9,27 355,6 219,1 14” x 8” 9,52 8,18 12,70 12,70 — — 7,92 6,35 9,52 7,04 11,12 8,18 355,6 168,3 14” x 6” 9,52 7,11 12,70 10,97 — — — — — — 11,12 7,11 406,4 355,6 16” x 14” 9,52 9,52 12,70 12,70 6,35 6,35 7,92 7,92 9,52 9,52 12,70 11,12 406,4 323,8 16” x 12” 9,52 9,52 12,70 12,70 — — 7,92 6,35 9,52 8,38 12,70 10,31 406,4 273,0 356,0 16” x 10” 9,52 9,27 12,70 12,70 — — 7,92 6,35 9,52 7,80 12,70 9,27 406,4 219,1 16” x 8” 9,52 8,18 12,70 12,70 — — 7,92 6,35 9,52 7,04 12,70 8,18 406,4 168,3 16” x 6” 9,52 7,11 12,70 10,97 — — — — — — 12,70 7,11 457,2 406,4 381,0 18” x 16” 9,52 9,52 12,70 12,70 6,35 6,35 7,92 7,92 11,12 9,52 14,27 12,70
140,0
127,0
178,0
203,0
330,0
Tolleranze dimensionali: pag. 81Riduzioni con dimensioni o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Reducers with special thickness and size: on application (−)
[mm] [mm] [mm]
51
SCH. 60 SCH. 80 SCH. 100 SCH. 120 SCH. 140 SCH. 160 SCH. XXS NPS S S1 S S1 S S1 S S1 S S1 S S1 S S1
— — 8,56 4,55 — — — — — — 13,49 6,35 17,12 9,09 4” x 1”
— — 9,52 8,56 — — 12,70 11,12 — — 15,87 13,49 19,05 17,12 5” x 4”
— — 9,52 8,08 — — — — — — — — — — 5” x 31/2”
— — 9,52 7,62 — — — — — — 15,87 11,12 19,05 15,24 5” x 3”
— — 9,52 7,01 — — — — — — 15,87 9,52 19,05 14,02 5” x 21/2”
— — 9,52 5,54 — — — — — — 15,87 8,74 19,05 11,07 5” x 2” — — 10,97 9,52 — — 14,27 12,70 — — 18,24 15,87 21,94 19,05 6” x 5” — — 10,97 8,56 — — 14,27 11,12 — — 18,24 13,49 21,94 17,12 6” x 4” — — 10,97 8,08 — — — — — — — — — — 6” x 31/2” — — 10,97 7,62 — — — — — — 18,24 11,12 21,94 15,24 6” x 3” — — 10,97 7,01 — — — — — — 18,24 9,52 21,94 14,02 6” x 21/2” — — 10,97 5,54 — — — — — — 18,24 8,74 21,94 11,07 6” x 2” — — 12,70 10,97 — — 18,24 14,27 — — 23,01 18,24 22,22 21,94 8” x 6” — — 12,70 9,52 — — 18,24 12,70 — — 23,01 15,87 22,22 19,05 8” x 5” — — 12,70 8,56 — — 18,24 11,12 — — 23,01 13,49 22,22 17,12 8” x 4” — — 12,70 8,08 — — — — — — — — — — 8” x 31/2” — — 12,70 7,62 — — — — — — 23,01 11,12 22,22 15,24 8” x 3” 12,70 10,30 15,06 12,70 18,24 15,06 21,41 18,24 25,40 20,62 28,57 23,01 25,40 22,22 10” x 8” — — 15,06 10,97 — — 21,41 14,27 — — 28,57 18,24 25,40 21,94 10” x 6” — — 15,06 9,52 — — 21,41 12,70 — — 28,57 15,87 25,40 19,05 10” x 5” — — 15,06 8,56 — — 21,41 11,12 — — 28,57 13,49 25,40 17,12 10” x 4” 14,30 12,70 17,45 15,06 21,41 18,24 25,40 21,41 28,57 25,40 33,32 28,57 25,40 25,40 12” x 10” 14,30 10,30 17,45 12,70 21,41 15,06 25,40 18,24 28,57 20,62 33,32 23,01 25,40 22,22 12” x 8” — — 17,45 10,97 — — 25,40 14,27 — — 33,32 18,24 25,40 21,94 12” x 6” — — 17,45 9,52 — — 25,40 12,70 — — 33,32 15,87 25,40 19,05 12” x 5” — — 17,45 8,56 — — 25,40 11,12 — — 33,32 13,49 25,40 17,12 12” x 4” 15,10 14,30 19,05 17,45 23,80 21,41 27,76 25,40 31,75 28,57 35,71 33,32 — — 14” x 12” 15,10 12,70 19,05 15,06 23,80 18,24 27,76 21,41 31,75 25,40 35,71 28,57 — — 14” x 10” 15,10 10,30 19,05 12,70 23,80 15,06 27,76 18,24 31,75 20,62 35,71 23,01 — — 14” x 8” — — 19,05 10,97 — — 27,76 14,27 — — 35,71 18,24 — — 14” x 6” 16,70 15,10 21,41 19,05 26,19 23,80 30,94 27,76 36,52 31,75 40,46 35,71 — — 16” x 14” 16,70 14,30 21,41 17,45 26,19 21,41 30,94 25,40 36,52 28,57 40,46 33,32 — — 16” x 12” 16,70 12,70 21,41 15,06 26,19 18,24 30,94 21,41 36,52 25,40 40,46 28,57 — — 16” x 10” 16,70 10,30 21,41 12,70 26,19 15,06 30,94 18,24 36,52 20,62 40,46 23,01 — — 16” x 8” — — 21,41 10,97 — — 30,94 14,27 — — 40,46 18,24 — — 16” x 6” 19,05 16,70 23,80 21,41 29,36 26,19 34,92 30,94 39,67 36,52 45,24 40,46 — — 18” x 16”
Riduzioni concentricheed eccentriche
Concentric and eccentric reducers
D d H NPS SCH.STD SCH.XS SCH. 10 SCH.20 SCH.30 SCH.40 S S1 S S1 S S1 S S1 S S1 S S1
457,2 355,6 18” x 14” 9,52 9,52 12,70 12,70 6,35 6,35 7,92 7,92 11,12 9,52 14,27 11,12 457,2 323,8
381,0 18” x 12” 9,52 9,52 12,70 12,70 — — 7,92 6,35 11,12 8,38 14,27 10,31
457,2 273,0 18” x 10” 9,52 9,27 12,70 12,70 — — 7,92 6,35 11,12 7,80 14,27 9,27 457,2 219,1 18” x 8” 9,52 8,18 12,70 12,70 — — 7,92 6,35 11,12 7,04 14,27 8,18 508,0 457,2 20” x 18” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 7,92 12,70 11,12 15,06 14,27 508,0 406,4 20” x 16” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 7,92 12,70 9,52 15,06 12,70 508,0 355,6
508,0 20” x 14” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 7,92 12,70 9,52 15,06 11,12
508,0 323,8 20” x 12” 9,52 9,52 12,70 12,70 — — 9,52 6,35 12,70 8,38 15,06 10,31 508,0 273,0 20” x 10” 9,52 9,27 12,70 12,70 — — 9,52 6,35 12,70 7,80 15,06 9,27 508,0 219,1 20” x 8” 9,52 8,18 12,70 12,70 — — 9,52 6,35 12,70 7,04 15,06 8,18 558,8 508,0 22” x 20” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 9,52 12,70 12,70 — — 558,8 457,2
508,0 22” x 18” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 7,92 12,70 11,12 — —
558,8 406,4 22” x 16” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 7,92 12,70 9,52 — — 558,8 355,6 22” x 14” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 7,92 12,70 9,52 — — 609,6 558,8 24” x 22” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 9,52 14,25 12,70 — — 609,6 508,0 24” x 20” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 9,52 14,25 12,70 17,45 15,06 609,6 457,2 508,0 24” x 18” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 7,92 14,25 11,12 17,45 14,27 609,6 406,4 24” x 16” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 7,92 14,25 9,52 17,45 12,70 609,6 355,6 24” x 14” 9,52 9,52 12,70 12,70 6,35 6,35 9,52 7,92 14,25 9,52 17,45 11,12 660,4 609,6 26” x 24” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 — — — — 660,4 558,8 26” x 22” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 — — — — 660,4 508 26” x 20” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 — — — — 660,4 457,2 26” x 18” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 — — — — 711,2 660,4 28” x 26” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 — — — — 711,2 609,6 28” x 24” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 14,25 — — 711,2 558,8 28” x 22” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 12,70 — — 711,2 508,0 610,0 28” x 20” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 12,70 — — 711,2 457,2 28” x 18” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 11,12 — — 711,2 406,4 28” x 16” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 9,52 — — 711,2 355,6 28” x 14” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 9,52 — — 762,0 711,2 30” x 28” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 15,88 15,88 — — 762,0 660,0 30” x 26” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 — — — — 762,0 609,6 30” x 24” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 14,25 — — 762,0 559,0 30” x 22” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 12,70 — — 762,0 508,0 30” x 20” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 12,70 — — 762,0 457,2 30” x 18” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 11,12 — —
610,0
610,0
52
Tolleranze dimensionali: pag. 81Riduzioni con dimensioni o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Reducers with special thickness and size: on application (−)
[mm] [mm] [mm]
SCH. 60 SCH. 80 SCH. 100 SCH. 120 SCH. 140 SCH. 160 SCH. XXS NPS S S1 S S1 S S1 S S1 S S1 S S1 S S1
19,05 15,10 23,80 19,05 29,36 23,80 34,92 27,76 39,67 31,75 45,24 35,71 — — 18” x 14”
19,05 14,30 23,80 17,45 29,36 21,41 34,92 25,40 39,67 28,57 45,24 33,32 — — 18” x 12” 19,05 12,70 23,80 15,06 29,36 18,24 34,92 21,41 39,67 25,40 45,24 28,57 — — 18” x 10” 19,05 10,30 23,80 12,70 29,36 15,06 34,92 18,24 39,67 20,62 45,24 23,01 — — 18” x 8”
20,60 19,05 26,19 23,80 32,54 29,36 38,10 34,92 44,45 39,67 49,99 45,24 — — 20” x 18”
20,60 16,70 26,19 21,41 32,54 26,19 38,10 30,94 44,45 36,52 49,99 40,46 — — 20” x 16” 20,60 15,10 26,19 19,05 32,54 23,80 38,10 27,76 44,45 31,75 49,99 35,71 — — 20” x 14” 20,60 14,30 26,19 17,45 32,54 21,41 38,10 25,40 44,45 28,57 49,99 33,32 — — 20” x 12” 20,60 12,70 26,19 15,06 32,54 18,24 38,10 21,41 44,45 25,40 49,99 28,57 — — 20” x 10” 20,60 10,30 26,19 12,70 32,54 15,06 38,10 18,24 44,45 20,62 49,99 23,01 — — 20” x 8”
22,23 20,60 28,58 26,19 34,93 32,54 41,28 38,10 47,63 44,45 53,98 49,99 — — 22” x 20”
22,23 19,05 28,58 23,80 34,93 29,36 41,28 34,92 47,63 39,67 53,98 45,24 — — 22” x 18” 22,23 16,70 28,58 21,41 34,93 26,19 41,28 30,94 47,63 36,52 53,98 40,46 — — 22” x 16” 22,23 15,10 28,58 19,05 34,93 23,80 41,28 27,76 47,63 31,75 53,98 35,71 — — 22” x 14” 24,60 22,23 30,94 28,58 38,89 34,93 46,02 41,28 52,37 47,63 59,51 53,98 — — 24” x 22” 24,60 20,60 30,94 26,19 38,89 32,54 46,02 38,10 52,37 44,45 59,51 49,99 — — 24” x 20” 24,60 19,05 30,94 23,80 38,89 29,36 46,02 34,92 52,37 39,67 59,51 45,24 — — 24” x 18” 24,60 16,70 30,94 21,41 38,89 26,19 46,02 30,94 52,37 36,52 59,51 40,46 — — 24” x 16” 24,60 15,10 30,94 19,05 38,89 23,80 46,02 27,76 52,37 31,75 59,51 35,71 — — 24” x 14”
— — — — — — — — — — — — — — 26” x 24” — — — — — — — — — — — — — — 26” x 22” — — — — — — — — — — — — — — 26” x 20” — — — — — — — — — — — — — — 26” x 18” — — — — — — — — — — — — — — 28” x 26” — — — — — — — — — — — — — — 28” x 24”
— — — — — — — — — — — — — — 28” x 22” — — — — — — — — — — — — — — 28” x 20”
— — — — — — — — — — — — — — 28” x 18”
— — — — — — — — — — — — — — 28” x 16”
— — — — — — — — — — — — — — 28” x 14”
— — — — — — — — — — — — — — 30” x 28”
— — — — — — — — — — — — — — 30” x 26” — — — — — — — — — — — — — — 30” x 24”
— — — — — — — — — — — — — — 30” x 22”
— — — — — — — — — — — — — — 30” x 20”
— — — — — — — — — — — — — — 30” x 18”
53
Riduzioni concentricheed eccentriche
Concentric and eccentric reducers
D d H NPS SCH.STD SCH.XS SCH. 10 SCH.20 SCH.30 SCH.40 S S1 S S1 S S1 S S1 S S1 S S1
762,0 406,4 30” x 16” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 9,52 — — 762,0 355,6 30” x 14” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 9,52 — — 812,8 762,0 32” x 30” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 15,88 15,88 — — 812,8 711,2 32” x 28” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 15,88 15,88 — — 812,8 660,0 32” x 26” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 — — — — 812,8 609,6 32” x 24” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 14,25 17,45 17,45 812,8 559,0 32” x 22” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 12,70 — — 812,8 508,0 32” x 20” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 12,70 17,45 15,06 812,8 457,2 32” x 18” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 11,12 17,45 14,27 812,8 406,4 32” x 16” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 9,52 17,45 12,70 864,0 813,0 34” x 32” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 15,88 15,88 17,45 17,45 864,0 762,0 34” x 30” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 15,88 15,88 — — 864,0 660,0 34” x 26” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 — — — — 864,0 610,0 34” x 24” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 14,25 17,45 17,45 914,4 864,0 36” x 34” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 15,88 15,88 19,05 17,45 914,4 812,8 36” x 32” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 15,88 15,88 19,05 17,45
914,4 762,0 36” x 30” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 15,88 15,88 — —
914,4 711,2 36” x 28” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 15,88 15,88 — — 914,4 660,0 36” x 26” 9,52 9,52 12,70 12,70 7,92 7,92 12,70 12,70 — — — —
914,4 609,6 36” x 24” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 14,25 19,05 17,45
914,4 559,0 36” x 22” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 12,70 — — 914,4 508,0 36” x 20” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 9,52 15,88 12,70 19,05 15,06
914,4 457,2 36” x 18” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 11,12 19,05 14,27
914,4 406,4 36” x 16” 9,52 9,52 12,70 12,70 7,92 6,35 12,70 7,92 15,88 9,52 19,05 12,70 965,0 914,0 38” x 36” 9,52 9,52 12,70 12,70 — — — — — — — — 965,0 864,0 38” x 34” 9,52 9,52 12,70 12,70 — — — — — — — — 965,0 813,0 38” x 32” 9,52 9,52 12,70 12,70 — — — — — — — — 965,0 762,0 38” x 30” 9,52 9,52 12,70 12,70 — — — — — — — — 965,0 711,0 38” x 28” 9,52 9,52 12,70 12,70 — — — — — — — — 965,0 660,0 38” x 26” 9,52 9,52 12,70 12,70 — — — — — — — — 1016,0 965,0 40” x 38” 9,52 9,52 12,70 12,70 — — — — — — — — 1016,0 914,4 40” x 36” 9,52 9,52 12,70 12,70 — — — — — — — — 1016,0 864,0 40” x 34” 9,52 9,52 12,70 12,70 — — — — — — — — 1016,0 812,8 40” x 32” 9,52 9,52 12,70 12,70 — — — — — — — — 1016,0 762,0 40” x 30” 9,52 9,52 12,70 12,70 — — — — — — — — 1016,0 711,2 40” x 28” 9,52 9,52 12,70 12,70 — — — — — — — —
610,0
610,0
610,0
610,0
610,0
610,0
54
Tolleranze dimensionali: pag. 81Riduzioni con dimensioni o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Reducers with special thickness and size: on application (−)
[mm] [mm] [mm]
SCH. 60 SCH. 80 SCH. 100 SCH. 120 SCH. 140 SCH. 160 SCH. XXS NPS S S1 S S1 S S1 S S1 S S1 S S1 S S1
— — — — — — — — — — — — — — 30” x 16” — — — — — — — — — — — — — — 30” x 14” — — — — — — — — — — — — — — 32” x 30” — — — — — — — — — — — — — — 32” x 28” — — — — — — — — — — — — — — 32” x 26” — — — — — — — — — — — — — — 32” x 24” — — — — — — — — — — — — — — 32” x 22” — — — — — — — — — — — — — — 32” x 20” — — — — — — — — — — — — — — 32” x 18” — — — — — — — — — — — — — — 32” x 16” — — — — — — — — — — — — — — 34” x 32” — — — — — — — — — — — — — — 34” x 30” — — — — — — — — — — — — — — 34” x 26” — — — — — — — — — — — — — — 34” x 24” — — — — — — — — — — — — — — 36” x 34” — — — — — — — — — — — — — — 36” x 32” — — — — — — — — — — — — — — 36” x 30” — — — — — — — — — — — — — — 36” x 28” — — — — — — — — — — — — — — 36” x 26” — — — — — — — — — — — — — — 36” x 24” — — — — — — — — — — — — — — 36” x 22” — — — — — — — — — — — — — — 36” x 20” — — — — — — — — — — — — — — 36” x 18” — — — — — — — — — — — — — — 36” x 16” — — — — — — — — — — — — — — 38” x 36” — — — — — — — — — — — — — — 38” x 34” — — — — — — — — — — — — — — 38” x 32” — — — — — — — — — — — — — — 38” x 30” — — — — — — — — — — — — — — 38” x 28” — — — — — — — — — — — — — — 38” x 26” — — — — — — — — — — — — — — 40” x 38” — — — — — — — — — — — — — — 40” x 36” — — — — — — — — — — — — — — 40” x 34” — — — — — — — — — — — — — — 40” x 32” — — — — — — — — — — — — — — 40” x 30” — — — — — — — — — — — — — — 40” x 28”
55
Riduzioni concentricheed eccentriche
Concentric and eccentric reducers
D d H NPS SCH.STD SCH.XS SCH. 10 SCH.20 SCH.30 SCH.40 S S1 S S1 S S1 S S1 S S1 S S1
1016,0 609,6 40” x 24” 9,52 9,52 12,70 12,70 — — — — — — — — 1016,0 559,0 40” x 22” 9,52 9,52 12,70 12,70 — — — — — — — — 1016,0 508,0 40” x 20” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 1016,0 42” x 40” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 965,0 42” x 38” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 914,4 42” x 36” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 864,0 42” x 34” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 812,8 42” x 32” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 762,0 42” x 30” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 711,2 42” x 28” 9,52 9,52 12,70 12,70 — — — — — — — — 1066,8 609,6 42” x 24” 9,52 9,52 12,70 12,70 — — — — — — — — 1118,0 1067,0 44” x 42” 9,52 9,52 12,70 12,70 — — — — — — — — 1118,0 1016,0 44” x 40” 9,52 9,52 12,70 12,70 — — — — — — — — 1118,0 965,0 44” x 38” 9,52 9,52 12,70 12,70 — — — — — — — — 1118,0 914,0 44” x 36” 9,52 9,52 12,70 12,70 — — — — — — — — 1168,0 1188,0 46” x 44” 9,52 9,52 12,70 12,70 — — — — — — — 1168,4 1067,0 46” x 42” 9,52 9,52 12,70 12,70 — — — — — — — —
1168,4 1016,0 46” x 40” 9,52 9,52 12,70 12,70 — — — — — — — — 1168,4 965,0 46” x 38” 9,52 9,52 12,70 12,70 — — — — — — — — 1168,4 914,4 46” x 36” 9,52 9,52 12,70 12,70 — — — — — — — — 1168,4 812,8 46” x 32” 9,52 9,52 12,70 12,70 — — — — — — — — 1168,4 762,0 46” x 30” 9,52 9,52 12,70 12,70 — — — — — — — — 1219,2 1168,4 48” x 46” 9,52 9,52 12,70 12,70 — — — — — — — — 1219,2 1118,0 48” x 44” 9,52 9,52 12,70 12,70 — — — — — — — — 1219,2 1066,8 48” x 42” 9,52 9,52 12,70 12,70 — — — — — — — — 1219,2 1016,0 48” x 40” 9,52 9,52 12,70 12,70 — — — — — — — — 1219,2 914,4 48” x 36” 9,52 9,52 12,70 12,70 — — — — — — — — 1219,2 812,8 48” x 32” 9,52 9,52 12,70 12,70 — — — — — — — — 1219,2 762,0 48” x 30” 9,52 9,52 12,70 12,70 — — — — — — — —
610,0610,0
610,0
610,0
711,0
711,0
56
Tolleranze dimensionali: pag. 81Riduzioni con dimensioni o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Reducers with special thickness and size: on application (−)
[mm] [mm] [mm]
SCH. 60 SCH. 80 SCH. 100 SCH. 120 SCH. 140 SCH. 160 SCH. XXS NPS S S1 S S1 S S1 S S1 S S1 S S1 S S1
— — — — — — — — — — — — — — 40” x 24” — — — — — — — — — — — — — — 40” x 22” — — — — — — — — — — — — — — 40” x 20” — — — — — — — — — — — — — — 42” x 40” — — — — — — — — — — — — — — 42” x 38” — — — — — — — — — — — — — — 42” x 36” — — — — — — — — — — — — — — 42” x 34” — — — — — — — — — — — — — — 42” x 32” — — — — — — — — — — — — — — 42” x 30” — — — — — — — — — — — — — — 42” x 28” — — — — — — — — — — — — — — 42” x 24” — — — — — — — — — — — — — — 44” x 42” — — — — — — — — — — — — — — 44” x 40” — — — — — — — — — — — — — — 44” x 38” — — — — — — — — — — — — — — 44” x 36” — — — — — — — — — — — — — — 46” x 44” — — — — — — — — — — — — — — 46” x 42” — — — — — — — — — — — — — — 46” x 40” — — — — — — — — — — — — — — 46” x 38” — — — — — — — — — — — — — — 46” x 36” — — — — — — — — — — — — — — 46” x 32” — — — — — — — — — — — — — — 46” x 30” — — — — — — — — — — — — — — 48” x 46” — — — — — — — — — — — — — — 48” x 44” — — — — — — — — — — — — — — 48” x 42” — — — — — — — — — — — — — — 48” x 40” — — — — — — — — — — — — — — 48” x 36” — — — — — — — — — — — — — — 48” x 32” — — — — — — — — — — — — — — 48” x 30”
57
Pesi [kg] Weights
Tolleranze dimensionali: pag. 81Riduzioni con dimensioni o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Reducers with special thickness and size: on application (−)
D H NPS S = SCHEDULE [mm] [mm] SERIES STD XS 10 20 30 40 60 80 100 120 140 160 XXS 21,3 — 1/2” — — — — — — — — — — — — — 26,7 38,0 3/4” 0,09 0,16 — — — 0,09 — 0,16 — — — — — 33,4 51,0 1” 0,10 0,20 — — — 0,10 — 0,20 — — — 0,25 — 42,2 51,0 11/4” 0,20 0,30 — — — 0,20 — 0,30 — — — 0,30 0,35 48,3 64,0 11/2” 0,30 0,40 — — — 0,30 — 0,40 — — — 0,50 0,45 60,3 76,0 2” 0,40 0,60 — — — 0,40 — 0,60 — — — 1,10 0,70 73,0 89,0 21/2” 0,80 1,00 — — — 0,80 — 1,00 — — — 1,60 1,30 88,9 89,0 3” 1,00 1,40 — — — 1,00 — 1,40 — — — 2,00 2,10 101,6 102,0 31/2” 1,40 2,00 — — — 1,40 — 2,00 — — — 2,80 2,60 114,3 102,0 4” 1,60 2,20 — — — 1,60 — 2,20 — 3,00 — 4,00 3,70 141,3 127,0 5” 2,80 4,00 — — — 2,80 — 4,00 — 5,60 — 7,00 4,70 168,3 140,0 6” 4,00 6,00 — — — 4,00 — 6,00 — 8,30 — 10,50 8,00 219,1 152,0 8” 6,50 9,90 — 5,80 6,20 6,50 8,60 9,90 12,60 15,00 17,00 18,80 12,30 273,0 171,0 10” 10,00 14,00 — 9,00 10,00 10,00 14,00 18,00 22,00 26,00 30,00 32,00 18,00 323,8 203,0 12” 15,00 19,00 — 13,00 14,00 16,00 23,00 29,00 35,00 41,00 46,00 56,00 34,00 355,6 330,0 14” 30,00 36,00 25,00 28,00 30,00 34,00 47,00 60,00 72,00 82,00 92,00 104,0 46,00 406,4 356,0 16” 37,00 48,00 33,00 35,00 37,00 48,00 62,00 82,00 98,00 114,0 131,0 145,0 — 457,2 381,0 18” 45,00 58,00 40,00 42,00 54,00 68,00 90,00 110,0 132,0 150,0 172,0 195,0 — 508,0 508,0 20” 68,00 86,00 62,00 68,00 86,00 105,0 140,0 173,0 210,0 240,0 275,0 310,0 — 558,8 508,0 22” 72,00 93,00 67,00 72,00 93,00 130,0 — — — — — 450,0 — 609,6 508,0 24” 70,00 77,00 115,0 143,0 205,0 257,0 315,0 380,0 440,0 480,0 — — — 660,4 610,0 26” 100,0 130,0 — 130,0 — — — — — — — — — 711,2 610,0 28” 105,0 140,0 — 140,0 — — — — — — — — — 762,0 610,0 30” 110,0 145,0 — — — — — — — — — — — 812,8 610,0 32” 125,0 150,0 — — — — — — — — — — — 864,0 610,0 34” 130,0 158,0 — — — — — — — — — — — 914,4 610,0 36” 135,0 175,0 — — — — — — — — — — — 965,0 610,0 38” — — — — — — — — — — — — — 1016,0 610,0 40” — — — — — — — — — — — — — 1066,8 610,0 42” — — — — — — — — — — — — — 1118,0 610,0 44” — — — — — — — — — — — — — 1168,0 711,0 46” — — — — — — — — — — — — — 1219,0 711,0 48” — — — — — — — — — — — — —
58
Croci Crosses
60
D M NPS S = SCHEDULE [mm] [mm] STD XS 10 20 30 40 60 80 100 120 140 160 XXS 21,3 25,0 1/2” 2,77 3,73 — — — 2,77 — 3,73 — — — 4,75 7,47 26,7 28,5 3/4” 2,87 3,91 — — — 2,87 — 3,91 — — — 5,54 7,82 33,4 38,0 1” 3,38 4,55 — — — 3,38 — 4,55 — — — 6,35 9,09 42,2 48,0 11/4” 3,56 4,85 — — — 3,56 — 4,85 — — — 6,35 9,70 48,3 57,0 11/2” 3,68 5,08 — — 3,18 3,68 — 5,08 — — — 7,14 10,16 60,3 64,0 2” 3,91 5,54 — — 3,18 3,91 — 5,54 — — — 8,74 11,07 73,0 76,0 21/2” 5,16 7,01 — — 4,78 5,16 — 7,01 — — — 9,52 14,02 88,9 86,0 3” 5,49 7,62 — — 4,78 5,49 — 7,62 — — — 11,12 15,24 101,6 95,0 31/2” 5,74 8,08 — — 4,78 5,74 — 8,08 — — — — _ 114,3 105,0 4” 6,02 8,56 — — 4,78 6,02 — 8,56 — 11,12 — 13,49 17,12 141,3 124,0 5” 6,55 9,52 — — — 6,55 — 9,52 — 12,70 — 15,87 19,05 168,3 143,0 6” 7,11 10,97 — — — 7,11 — 10,97 — 14,27 — 18,24 21,94 219,1 178,0 8” 8,18 12,70 — 6,35 7,04 8,18 10,30 12,70 15,06 18,24 20,62 23,01 22,22 273,0 216,0 10” 9,27 12,70 — 6,35 7,80 9,27 12,70 15,06 18,24 21,41 25,40 28,57 25,40 323,8 254,0 12” 9,52 12,70 — 6,35 8,38 10,31 14,30 17,45 21,41 25,40 28,57 33,32 25,40 355,6 279,0 14” 9,52 12,70 6,35 7,92 9,52 11,12 15,10 19,05 23,80 27,76 31,75 35,71 — 406,4 305,0 16” 9,52 12,70 6,35 7,92 9,52 12,70 16,70 21,41 26,19 30,94 36,52 40,46 — 457,2 343,0 18” 9,52 12,70 6,35 7,92 11,12 14,27 19,05 23,80 29,36 34,92 39,67 45,24 — 508,0 381,0 20” 9,52 12,70 6,35 9,52 12,70 15,06 20,60 26,19 32,54 38,10 44,45 49,99 — 558,8 419,0 22” 9,52 12,70 6,35 9,52 12,70 — 22,23 28,58 34,93 41,28 47,63 53,98 — 609,6 431,8 24” 9,52 12,70 6,35 9,52 14,25 17,45 24,60 30,94 38,89 46,02 52,37 59,51 — 660,4 495,0 26” 9,52 12,70 7,92 12,70 — — — — — — — — — 711,2 521,0 28” 9,52 12,70 7,92 12,70 15,88 — — — — — — — — 762,0 559,0 30” 9,52 12,70 7,92 12,70 15,88 — — — — — — — — 812,8 597,0 32” 9,52 12,70 7,92 12,70 15,88 17,48 — — — — — — — 863,6 635,0 34” 9,52 12,70 7,92 12,70 15,88 17,48 — — — — — — — 914,4 673,0 36” 9,52 12,70 7,92 12,70 15,88 19,05 — — — — — — — 965,2 711,0 38” 9,52 12,70 — — — — — — — — — — —1016,0 749,0 40” 9,52 12,70 — — — — — — — — — — —1066,8 711,0 42” 9,52 12,70 — — — — — — — — — — —1118,0 762,0 44” 9,52 12,70 — — — — — — — — — — —1168,4 800,0 46” 9,52 12,70 — — — — — — — — — — —1219,2 838,0 48” 9,52 12,70 — — — — — — — — — — —
Tolleranze dimensionali: pag. 81 Pezzi a croce ridotti o con dimensionio spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Reducing crosses or crosses with special
thickness and size: on application (−)
Pesi [kg] Weights
61
D M NPS S = SCHEDULE [mm] [mm] STD XS 10 20 30 40 60 80 100 120 140 160 XXS 21,3 25,0 1/2” 0,13 0,20 — — — 0,13 — 0,20 — — — 0,32 0,40 26,7 28,5 3/4” 0,20 0,30 — — — 0,20 — 0,30 — — — 0,45 0,60 33,4 38,0 1” 0,47 0,61 — — — 0,47 — 0,61 — — — 1,04 1,30 42,2 48,0 11/4” 0,65 0,91 — — — 0,65 — 0,91 — — — 1,30 1,56 48,3 57,0 11/2” 0,91 1,17 — — — 0,91 — 1,17 — — — 1,95 2,35 60,3 64,0 2” 1,30 1,85 — — — 1,30 — 1,85 — — — 3,25 3,90 73,0 76,0 21/2” 2,35 2,90 — — — 2,35 — 2,90 — — — 5,20 7,80 88,9 86,0 3” 3,50 3,90 — — — 3,50 — 3,90 — — — 7,80 10,40 101,6 95,0 31/2” 4,60 6,35 — — — 4,60 — 6,35 — — — 10,40 14,30 114,3 105,0 4” 5,70 8,30 — — — 5,70 — 8,30 — — — 13,00 16,90 141,3 124,0 5” 9,10 12,00 — — — 9,10 — 12,00 — — — 26,00 31,20 168,3 143,0 6” 13,00 19,50 — — — 13,00 — 19,50 — — — 32,50 39,00 219,1 178,0 8” 24,70 37,60 — — — 24,70 — 37,60 — — — 67,60 67,60 273,0 216,0 10” 39,00 62,00 — — — 39,00 — — — — — 111,0 — 323,8 254,0 12” 61,00 101,0 — — — 66,00 — — — — — 182,0 — 355,6 279,0 14” 78,00 124,0 — — — — — — — — — — — 406,4 305,0 16” 97,00 134,0 — — — — — — — — — — — 457,2 343,0 18” 136,0 163,0 — — — — — — — — — — — 508,0 381,0 20” 163,0 208,0 — — — — — — — — — — — 558,8 419,0 22” 189,0 241,0 — — — — — — — — — — — 609,6 431,8 24” 215,0 267,0 — — — — — — — — — — — 660,4 495,0 26” — — — — — — — — — — — — — 711,2 521,0 28” — — — — — — — — — — — — — 762,0 559,0 30” — — — — — — — — — — — — — 812,8 597,0 32” — — — — — — — — — — — — — 863,6 635,0 34” — — — — — — — — — — — — — 914,4 673,0 36” — — — — — — — — — — — — — 965,2 711,0 38” — — — — — — — — — — — — — 1016,0 749,0 40” — — — — — — — — — — — — — 1066,8 711,0 42” — — — — — — — — — — — — — 1118,0 762,0 44” — — — — — — — — — — — — — 1168,4 800,0 46” — — — — — — — — — — — — — 1219,2 838,0 48” — — — — — — — — — — — — —
Tolleranze dimensionali: pag. 81 Pezzi a croce ridotti o con dimensionio spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Reducing crosses or crosses with special
thickness and size: on application (−)
Fondelli ASME ASME Caps
Tolleranze dimensionali: pag. 81L per spessori fino a XS - L1 per spessori oltre XS Spessori o dimensioni particolari: a richiesta (−)
Dimensional tolerances: pag. 81L for thickness up to XS - L1 for thickness over XS
Special thickness and size: on application (−)
S
D L L1 NPS S = SCHEDULE
[mm] [mm] STD XS 10 20 30 40 60 80 100 120 140 160 XXS 21,3 25,9 25,9 1/2” 2,77 3,73 — — — 2,77 — 3,73 — — — 4,75 7,47 26,7 25,9 25,9 3/4” 2,87 3,91 — — — 2,87 — 3,91 — — — 5,54 7,82 33,4 38,1 38,1 1” 3,38 4,55 — — — 3,38 — 4,55 — — — 6,35 9,09 42,2 38,1 38,1 11/4” 3,56 4,85 — — — 3,56 — 4,85 — — — 6,35 9,70 48,3 38,1 38,1 11/2” 3,68 5,08 — — 3,18 3,68 — 5,08 — — — 7,14 10,16 60,3 38,1 44,4 2” 3,91 5,54 — — 3,18 3,91 — 5,54 — — — 8,74 11,07 73,0 38,1 50,8 21/2” 5,16 7,01 — — 4,78 5,16 — 7,01 — — — 9,52 14,02 88,9 50,8 63,5 3” 5,49 7,62 — — 4,78 5,49 — 7,62 — — — 11,12 15,24 101,6 63,5 76,2 31/2” 5,74 8,08 — — 4,78 5,74 — 8,08 — — — — — 114,3 63,5 76,2 4” 6,02 8,56 — — 4,78 6,02 — 8,56 — 11,12 — 13,49 17,12 141,3 76,2 88,9 5” 6,55 9,52 — — — 6,55 — 9,52 — 12,70 — 15,87 19,05 168,3 88,9 101,6 6” 7,11 10,97 — — — 7,11 — 10,97 — 14,27 — 18,24 21,94 219,1 101,6 127,0 8” 8,18 12,70 — 6,35 7,04 8,18 10,30 12,70 15,06 18,24 20,62 23,01 22,22 273,0 127,0 152,4 10” 9,27 12,70 — 6,35 7,80 9,27 12,70 15,06 18,24 21,41 25,40 28,57 25,40 323,8 152,4 177,8 12” 9,52 12,70 — 6,35 8,38 10,31 14,30 17,45 21,41 25,40 28,57 33,32 25,40 355,6 165,1 190,5 14” 9,52 12,70 6,35 7,92 9,52 11,12 15,10 19,05 23,80 27,76 31,75 35,71 — 406,4 177,8 203,2 16” 9,52 12,70 6,35 7,92 9,52 12,70 16,70 21,41 26,19 30,94 36,52 40,46 — 457,2 203,2 228,6 18” 9,52 12,70 6,35 7,92 11,12 14,27 19,05 23,80 29,36 34,92 39,67 45,24 — 508,0 228,6 254,0 20” 9,52 12,70 6,35 9,52 12,70 15,06 20,60 26,19 32,54 38,10 44,45 49,99 — 558,8 254,0 254,0 22” 9,52 12,70 6,35 9,52 12,70 — 22,23 28,58 34,93 41,28 47,63 53,98 — 609,6 266,7 304,8 24” 9,52 12,70 6,35 9,52 14,25 17,45 24,60 30,94 38,89 46,02 52,37 59,51 — 660,4 266,7 — 26” 9,52 12,70 7,92 12,70 — — — — — — — — — 711,2 266,7 — 28” 9,52 12,70 7,92 12,70 15,88 — — — — — — — — 762,0 266,7 — 30” 9,52 12,70 7,92 12,70 15,88 — — — — — — — — 812,8 266,7 — 32” 9,52 12,70 7,92 12,70 15,88 17,45 — — — — — — — 863,6 266,7 — 34” 9,52 12,70 7,92 12,70 15,88 17,45 — — — — — — — 914,4 266,7 — 36” 9,52 12,70 7,92 12,70 15,88 19,05 — — — — — — — 965,2 305,0 — 38” 9,52 12,70 — — — — — — — — — — — 1016,0 305,0 — 40” 9,52 12,70 — — — — — — — — — — — 1066,8 305,0 — 42” 9,52 12,70 — — — — — — — — — — — 1118,0 343,0 — 44” 9,52 12,70 — — — — — — — — — — — 1168,4 343,0 — 46” 9,52 12,70 — — — — — — — — — — — 1219,2 343,0 — 48” 9,52 12,70 — — — — — — — — — — —
[mm]
L / L1
64
Tolleranze dimensionali: pag. 81L per spessori fino a XS - L1 per spessori oltre XSSpessori o dimensioni particolari: a richiesta (−)
Dimensional tolerances: pag. 81L for thickness up to XS - L1 for thickness over XS
Special thickness and size: on application (−)
SPesi [kg]
Weights
D L L1 NPS S = SCHEDULE
[mm] [mm] STD XS 10 20 30 40 60 80 100 120 140 160 XXS 21,3 25,9 25,9 1/2” 0,03 0,05 — — — 0,03 — 0,05 — — — 0,10 0,15 26,7 25,9 25,9 3/4” 0,06 0,10 — — — 0,06 — 0,10 — — — 0,10 0,15 33,4 38,1 38,1 1” 0,10 0,15 — — — 0,10 — 0,15 — — — 0,15 0,20 42,2 38,1 38,1 11/4” 0,20 0,25 — — — 0,20 — 0,25 — — — 0,25 0,30 48,3 38,1 38,1 11/2” 0,25 0,30 — — — 0,25 — 0,30 — — — 0,30 0,40 60,3 38,1 44,4 2” 0,30 0,35 — — — 0,30 — 0,35 — — — 0,55 0,60 73,0 38,1 50,8 21/2” 0,50 0,50 — — — 0,50 — 0,50 — — — 0,90 1,00 88,9 50,8 63,5 3” 0,60 0,90 — — — 0,60 — 0,90 — — — 1,40 1,80 101,6 63,5 76,2 31/2” 1,10 1,70 — — — 1,10 — 1,70 — — — 2,50 2,70 114,3 63,5 76,2 4” 1,20 2,00 — — — 1,20 — 2,00 — — — 3,00 4,00 141,3 76,2 88,9 5” 2,10 3,00 — — — 2,10 — 3,00 — — — 5,50 7,00 168,3 88,9 101,6 6” 3,60 5,00 — — — 3,60 — 5,00 — — — 7,50 9,00 219,1 101,6 127,0 8” 5,50 7,00 — — — 5,50 — 7,00 — — — 18,00 18,00 273,0 127,0 152,4 10” 10,00 12,00 — — — 10,00 — 17,00 — — — 34,00 30,00 323,8 152,4 177,8 12” 14,00 18,00 — — — 14,00 18,00 31,00 — — — 55,00 42,00 355,6 165,1 190,5 14” 17,00 23,00 — — — 23,00 — 42,00 — — — 77,00 — 406,4 177,8 203,2 16” 23,00 30,00 — — — 30,00 — 55,00 — — — 100,0 — 457,2 203,2 228,6 18” 28,00 32,00 — — — 43,00 — 75,00 — — — 110,0 — 508,0 228,6 254,0 20” 35,00 46,00 — — — 60,00 — 100,0 — — — 175,0 — 558,8 254,0 254,0 22” 44,00 54,00 — — — 85,00 — 130,0 — — — 240,0 — 609,6 266,7 304,8 24” 51,00 60,00 — — — 98,00 — 155,0 — — — 285,0 — 660,4 266,7 — 26” 56,00 70,00 — — — — — — — — — — — 711,2 266,7 — 28” 60,00 75,00 — — — 120 — — — — — — — 762,0 266,7 — 30” 65,00 85,00 — — — — — — — — — — — 812,8 266,7 — 32” 71,00 95,00 — — — — — — — — — — — 863,6 266,7 — 34” 80,00 100,0 — — — — — — — — — — — 914,4 266,7 — 36” 85,00 110,0 — — — — — — — — — — — 965,2 305,0 — 38” — — — — — — — — — — — — — 1016,0 305,0 — 40” — — — — — — — — — — — — — 1066,8 305,0 — 42” — — — — — — — — — — — — — 1118,0 343,0 — 44” — — — — — — — — — — — — — 1168,4 343,0 — 46” — — — — — — — — — — — — — 1219,2 343,0 — 48” — — — — — — — — — — — — —
[mm]
L / L1
65
Curve ASME B16.9 short radius (R=1 D)
Short radius ASME B16.9 Elbows
68
A O K NPS D S = SCHEDULE SCH. STD SCH. XS SCH. 10 SCH. 20 SCH. 30 25,4 50,6 41,3 1” 33,4 3,38 4,55 — — —
31,8 63,5 52,4 11/4” 42,2 3,56 4,85 — — — 38,1 76,2 61,9 11/2” 48,3 3,68 5,08 — — 3,18 50,8 101,6 81,0 2” 60,3 3,91 5,54 — — 3,18 63,5 127,0 100,0 21/2” 73,0 5,16 7,01 — — 4,78 76,2 152,4 120,6 3” 88,9 5,49 7,62 — — 4,78 88,9 177,8 139,7 31/2” 101,6 5,74 8,08 — — 4,78 101,6 203,2 158,8 4” 114,3 6,02 8,56 — — 4,78 127,0 254,0 196,8 5” 141,3 6,55 9,52 — — — 152,4 304,8 237,0 6” 168,3 7,11 10,97 — — — 203,2 406,4 312,7 8” 219,1 8,18 12,70 — 6,35 7,04 254,0 508,0 390,5 10” 273,0 9,27 12,70 — 6,35 7,80 304,8 609,6 466,7 12” 323,8 9,52 12,70 — 6,35 8,38 355,6 711,2 533,4 14” 355,6 9,52 12,70 6,35 7,92 9,52 406,4 812,8 609,6 16” 406,4 9,52 12,70 6,35 7,92 9,52 457,2 914,4 685,8 18” 457,2 9,52 12,70 6,35 7,92 11,12 508,0 1016,0 762,0 20” 508,0 9,52 12,70 6,35 9,52 12,70 558,8 1117,6 838,2 22” 558,8 9,52 12,70 6,35 9,52 12,70 609,6 1219,0 914,0 24” 609,6 9,52 12,70 6,35 9,52 14,25 660,4 — 990,6 26” 660,4 9,52 12,70 7,92 12,70 — 711,2 — 1066,8 28” 711,2 9,52 12,70 7,92 12,70 15,88 762,0 — 1143,0 30” 762,0 9,52 12,70 7,92 12,70 15,88 812,8 — 1219,2 32” 812,8 9,52 12,70 7,92 12,70 15,88 863,8 — 1295,4 34” 863,6 9,52 12,70 7,92 12,70 15,88 914,4 — 1371,6 36” 914,4 9,52 12,70 7,92 12,70 15,88 965,0 — 1371,6 38” 965,0 9,52 12,70 — — — 1016,0 — 1524,0 40” 1016,0 9,52 12,70 — — — 1066,8 — 1600,0 42” 1066,8 9,52 12,70 — — — 1118,0 — 1677,0 44” 1118,0 9,52 12,70 — — — 1168,4 — 1753,0 46” 1168,4 9,52 12,70 — — — 1219,2 — 1829,0 48” 1219,2 9,52 12,70 — — —
[mm] [mm] [mm] [mm]
Tolleranze dimensionali: pag. 81Curve con dimensioni o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Elbows with special thickness and size: on application (−)
69
S = SCHEDULE NPS SCH. 40 SCH. 60 SCH. 80 SCH. 100 SCH. 120 SCH. 140 SCH. 160 SCH. XXS 3,38 — 4,55 — — — 6,35 9,09 1” 3,56 — 4,85 — — — 6,35 9,70 11/4”
3,68 — 5,08 — — — 7,14 10,16 11/2”
3,91 — 5,54 — — — 8,74 11,07 2”
5,16 — 7,01 — — — 9,52 14,02 21/2”
5,49 — 7,62 — — — 11,12 15,24 3” 5,74 — 8,08 — — — — — 31/2” 6,02 — 8,56 — 11,12 — 13,49 17,12 4” 6,55 — 9,52 — 12,70 — 15,87 19,05 5” 7,11 — 10,97 — 14,27 — 18,24 21,94 6” 8,18 10,30 12,70 15,06 18,24 20,62 23,01 22,22 8” 9,27 12,70 15,06 18,24 21,41 25,40 28,57 25,40 10” 10,31 14,30 17,45 21,41 25,40 28,57 33,32 25,40 12” 11,12 15,10 19,05 23,80 27,76 31,75 35,71 — 14” 12,70 16,70 21,41 26,19 30,94 36,52 40,46 — 16” 14,27 19,05 23,80 29,36 34,92 39,67 45,24 — 18” 15,06 20,60 26,19 32,54 38,10 44,45 49,99 — 20” — 22,23 28,58 34,93 41,28 47,63 53,98 — 22” 17,45 24,60 30,94 38,89 46,02 52,37 59,51 — 24” — — — — — — — — 26” — — — — — — — — 28” — — — — — — — — 30” 17,45 — — — — — — — 32” 17,45 — — — — — — — 34” 19,05 — — — — — — — 36” — — — — — — — — 38” — — — — — — — — 40” — — — — — — — — 42” — — — — — — — — 44” — — — — — — — — 46” — — — — — — — — 48”
70
A B O K NPS D S=SCHEDULE SCH. STD SCH. XS SCH. 10 SCH. 20 SCH. 30 38,1 15,9 76,2 47,6 1/2” 21,3 2,77 3,73 — — — 38,1 19,1 76,2 50,9 3/4” 26,7 2,87 3,91 — — — 28,6* 11,1* 57,2* 42,9* 3/4”* 26,7 2,87 3,91 — — — 38,1 22,2 76,2 55,6 1” 33,4 3,38 4,55 — — — 47,6 25,4 95,2 69,8 11/4” 42,2 3,56 4,85 — — — 57,2 28,6 114,3 82,5 11/2” 48,3 3,68 5,08 — — 3,18 76,2 34,9 152,4 106,4 2” 60,3 3,91 5,54 — — 3,18 95,2 44,4 190,5 131,8 21/2” 73,0 5,16 7,01 — — 4,78 114,3 50,8 228,6 158,8 3” 88,9 5,49 7,62 — — 4,78 133,4 57,2 266,7 184,2 31/2” 101,6 5,74 8,08 — — 4,78 152,4 63,5 304,8 209,6 4” 114,3 6,02 8,56 — — 4,78 190,5 79,4 381,0 261,9 5” 141,3 6,55 9,52 — — — 228,6 95,2 457,2 312,7 6” 168,3 7,11 10,97 — — — 304,8 127,0 609,6 414,3 8” 219,1 8,18 12,70 — 6,35 7,04 381,0 158,8 762,0 517,5 10” 273,0 9,27 12,70 — 6,35 7,80 457,2 190,5 914,4 619,1 12” 323,8 9,52 12,70 — 6,35 8,38 533,4 222,2 1066,8 711,2 14” 355,6 9,52 12,70 6,35 7,92 9,52 609,6 254,0 1219,2 812,8 16” 406,4 9,52 12,70 6,35 7,92 9,52 685,8 285,8 1371,6 914,4 18” 457,2 9,52 12,70 6,35 7,92 11,12 762,0 317,5 1524,0 1016,0 20” 508,0 9,52 12,70 6,35 9,52 12,70 838,2 342,9 1676,4 1117,6 22” 558,8 9,52 12,70 6,35 9,52 12,70 914,4 381,0 1828,8 1219,2 24” 609,6 9,52 12,70 6,35 9,52 14,25 990,6 406,0 — 1320,8 26” 660,4 9,52 12,70 7,92 12,70 — 1066,8 438,0 — 1422,4 28” 711,2 9,52 12,70 7,92 12,70 15,88 1143,0 470,0 — 1524,0 30” 762,0 9,52 12,70 7,92 12,70 15,88 1219,2 502,0 — 1625,6 32” 812,8 9,52 12,70 7,92 12,70 15,88 1295,4 533,0 — 1727,2 34” 863,6 9,52 12,70 7,92 12,70 15,88 1371,6 565,0 — 1828,8 36” 914,4 9,52 12,70 7,92 12,70 15,88 1448,0 600,0 — 1930,5 38” 965,0 9,52 12,70 — — — 1524,0 632,0 — 2032,0 40” 1016,0 9,52 12,70 — — — 1600,0 660,0 — 2134,0 42” 1066,8 9,52 12,70 — — — 1676,0 695,0 — 2235,0 44” 1118,0 9,52 12,70 — — — 1753,0 727,0 — 2336,0 46” 1168,4 9,52 12,70 — — — 1829,0 759,0 — 2438,0 48” 1219,2 9,52 12,70 — — —
Curve ASME B16.9 long radius (R=1,5 D)
Long radius ASME B16.9 Elbows
[mm] [mm] [mm] [mm] [mm]
Tolleranze dimensionali: pag. 81Curve con dimensioni o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Elbows with special thickness and size: on application (−)
* a richiesta* on application
71
S=SCHEDULE NPS SCH. 40 SCH. 60 SCH. 80 SCH. 100 SCH. 120 SCH. 140 SCH. 160 SCH. XXS 2,77 — 3,73 — — — 4,75 7,47 1/2” 2,87 — 3,91 — — — 5,54 7,82 3/4” 2,87 — 3,91 — — — 5,54 7,82 3/4”* 3,38 — 4,55 — — — 6,35 9,09 1” 3,56 — 4,85 — — — 6,35 9,70 11/4” 3,68 — 5,08 — — — 7,14 10,16 11/2” 3,91 — 5,54 — — — 8,74 11,07 2” 5,16 — 7,01 — — — 9,52 14,02 21/2” 5,49 — 7,62 — — — 11,12 15,24 3” 5,74 — 8,08 — — — — — 3
1/2” 6,02 — 8,56 — 11,12 — 13,49 17,12 4” 6,55 — 9,52 — 12,70 — 15,87 19,05 5” 7,11 — 10,97 — 14,27 — 18,24 21,94 6” 8,18 10,30 12,70 15,06 18,24 20,62 23,01 22,22 8” 9,27 12,70 15,06 18,24 21,41 25,40 28,57 25,40 10” 10,31 14,30 17,45 21,41 25,40 28,57 33,32 25,40 12” 11,12 15,10 19,05 23,80 27,76 31,75 35,71 — 14” 12,70 16,70 21,41 26,19 30,94 36,52 40,46 — 16” 14,27 19,05 23,80 29,36 34,92 39,67 45,24 — 18” 15,06 20,60 26,19 32,54 38,10 44,45 49,99 — 20” — 22,23 28,58 34,93 41,28 47,63 53,98 — 22” 17,45 24,60 30,94 38,89 46,02 52,37 59,51 — 24” — — — — — — — — 26” — — — — — — — — 28” — — — — — — — — 30” 17,45 — — — — — — — 32” 17,45 — — — — — — — 34” 19,05 — — — — — — — 36” — — — — — — — — 38” — — — — — — — — 40” — — — — — — — — 42” — — — — — — — — 44” — — — — — — — — 46” — — — — — — — — 48”
Curve ASME (R=2,5 D)
ASME BendsTolleranze dimensionali: pag. 81
Curve con dimensioni o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Elbows with special thickness and size: on application (−)
A B K NPS D S = SCHEDULE SCH. STD SCH. XS SCH. 10 SCH. 20 SCH. 30 47,6 19,7 61,0 3/4” 26,7 2,87 3,91 — — — 63,5 26,3 80,2 1 33,4 3,38 4,55 — — — 79,4 32,9 100,5 11/4” 42,2 3,56 4,85 — — — 95,3 39,5 119,4 11/2” 48,3 3,68 5,08 — — 3,18 127,0 52,6 157,2 2 60,3 3,91 5,54 — — 3,18 158,8 65,8 195,3 21/2” 73,0 5,16 7,01 — — 4,78 190,5 78,9 235,0 3” 88,9 5,49 7,62 — — 4,78 222,3 92,1 273,1 31/2” 101,6 5,74 8,08 — — 4,78 254,0 105,2 311,2 4” 114,3 6,02 8,56 — — 4,78 317,5 131,5 388,2 5” 141,3 6,55 9,52 — — — 381,0 157,8 465,2 6” 168,3 7,11 10,97 — — — 508,0 210,4 617,6 8” 219,1 8,18 12,70 — 6,35 7,04 635,0 263,0 771,5 10” 273,0 9,27 12,70 — 6,35 7,80 762,0 315,6 923,9 12” 323,8 9,52 12,70 — 6,35 8,38 889,0 368,2 1066,8 14” 355,6 9,52 12,70 6,35 7,92 9,52 1016,0 420,8 1219,2 16” 406,4 9,52 12,70 6,35 7,92 9,52 1143,0 473,4 1371,6 18” 457,2 9,52 12,70 6,35 7,92 11,12 1270,0 526,1 1524,0 20” 508,0 9,52 12,70 6,35 9,52 12,70 1397,0 578,7 1676,4 22” 558,8 9,52 12,70 6,35 9,52 12,70 1524,0 631,3 1828,8 24” 609,6 9,52 12,70 6,35 9,52 14,25
[mm] [mm] [mm] [mm]
72
A
K
SB
B
S = SCHEDULE NPS SCH. 40 SCH. 60 SCH. 80 SCH. 100 SCH. 120 SCH. 140 SCH. 160 SCH. XXS 2,87 — 3,91 — — — 5,54 7,82 3/4” 3,38 — 4,55 — — — 6,35 9,09 1” 3,56 — 4,85 — — — 6,35 9,70 11/4”
3,68 — 5,08 — — — 7,14 10,16 11/2”
3,91 — 5,54 — — — 8,74 11,07 2”
5,16 — 7,01 — — — 9,52 14,02 21/2”
5,49 — 7,62 — — — 11,12 15,24 3” 5,74 — 8,08 — — — — — 31/2” 6,02 — 8,56 — 11,12 — 13,49 17,12 4” 6,55 — 9,52 — 12,70 — 15,87 19,05 5” 7,11 — 10,97 — 14,27 — 18,24 21,94 6” 8,18 10,30 12,70 15,06 18,24 20,62 23,01 22,22 8” 9,27 12,70 15,06 18,24 21,41 25,40 28,57 25,40 10” 10,31 14,30 17,45 21,41 25,40 28,57 33,32 25,40 12” 11,12 15,10 19,05 23,80 27,76 31,75 35,71 — 14” 12,70 16,70 21,41 26,19 30,94 36,52 40,46 — 16” 14,27 19,05 23,80 29,36 34,92 39,67 45,24 — 18” 15,06 20,60 26,19 32,54 38,10 44,45 49,99 — 20” — 22,23 28,58 34,93 41,28 47,63 53,98 — 22” 17,45 24,60 30,94 38,89 46,02 52,37 59,51 — 24”
73
Curve ASME B16.9 (R=3 D)
ASME B16.9 Elbows
A B K NPS D S = SCHEDULE SCH. STD SCH. XS SCH. 10 SCH. 20 SCH. 30 57,0 24,0 70,35 3/4” 26,7 2,87 3,91 — — — 76,0 31,0 92,7 1 33,4 3,38 4,55 — — — 95,0 39,0 116,1 11/4” 42,2 3,56 4,85 — — — 114,0 47,0 138,15 11/2” 48,3 3,68 5,08 — — 3,18 152,0 63,0 182,15 2 60,3 3,91 5,54 — — 3,18 190,0 79,0 226,5 21/2” 73,0 5,16 7,01 — — 4,78 229,0 95,0 273,45 3” 88,9 5,49 7,62 — — 4,78 267,0 111,0 317,8 31/2” 101,6 5,74 8,08 — — 4,78 305,0 127,0 362,15 4” 114,3 6,02 8,56 — — 4,78 381,0 157,0 451,65 5” 141,3 6,55 9,52 — — — 457,0 189,0 541,15 6” 168,3 7,11 10,97 — — — 610,0 252,0 719,55 8” 219,1 8,18 12,70 — 6,35 7,04 762,0 316,0 898,5 10” 273,0 9,27 12,70 — 6,35 7,80 914,0 378,0 1075,9 12” 323,8 9,52 12,70 — 6,35 8,38 1067,0 441,0 1244,8 14” 355,6 9,52 12,70 6,35 7,92 9,52 1219,0 505,0 1422,2 16” 406,4 9,52 12,70 6,35 7,92 9,52 1372,0 568,0 1600,5 18” 457,0 9,52 12,70 6,35 7,92 11,12 1524,0 632,0 1778,0 20” 508,0 9,52 12,70 6,35 9,52 12,70 1676,0 694,0 1955,5 22” 559,0 9,52 12,70 6,35 9,52 12,70 1829,0 757,0 2134,0 24” 610,0 9,52 12,70 6,35 9,52 14,25 1981,0 821,0 2311,0 26” 660,0 9,52 12,70 7,92 12,70 — 2134,0 883,0 2489,5 28” 711,0 9,52 12,70 7,92 12,70 15,88 2286,0 964,0 2667,0 30” 762,0 9,52 12,70 7,92 12,70 15,88 2438,0 1010,0 2844,5 32” 813,0 9,52 12,70 7,92 12,70 15,88 2591,0 1073,0 3023,0 34” 864,0 9,52 12,70 7,92 12,70 15,88 2743,0 1135,0 3200,0 36” 914,0 9,52 12,70 7,92 12,70 15,88 2896,0 1200,0 3378,5 38” 965,0 9,52 12,70 — — — 3048,0 1264,0 3556,0 40” 1016,0 9,52 12,70 — — — 3200,0 1326,0 3733,5 42” 1067,0 9,52 12,70 — — — 3353,0 1389,0 3912,0 44” 1118,0 9,52 12,70 — — — 3505,0 1453,0 4089,0 46” 1168,0 9,52 12,70 — — — 3658,0 1516,0 4267,5 48” 1219,0 9,52 12,70 — — —
[mm] [mm] [mm] [mm]
A
K
SB
B
74
Tolleranze dimensionali: pag. 81Curve con dimensioni o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Elbows with special thickness and size: on application (−)
S = SCHEDULE NPS SCH. 40 SCH. 60 SCH. 80 SCH. 100 SCH. 120 SCH. 140 SCH. 160 SCH. XXS 2,87 — 3,91 — — — 5,54 7,82 3/4” 3,38 — 4,55 — — — 6,35 9,09 1” 3,56 — 4,85 — — — 6,35 9,70 11/4”
3,68 — 5,08 — — — 7,14 10,16 11/2”
3,91 — 5,54 — — — 8,74 11,07 2”
5,16 — 7,01 — — — 9,52 14,02 21/2”
5,49 — 7,62 — — — 11,12 15,24 3” 5,74 — 8,08 — — — — — 31/2” 6,02 — 8,56 — 11,12 — 13,49 17,12 4” 6,55 — 9,52 — 12,70 — 15,87 19,05 5” 7,11 — 10,97 — 14,27 — 18,24 21,94 6” 8,18 10,30 12,70 15,06 18,24 20,62 23,01 22,22 8” 9,27 12,70 15,06 18,24 21,41 25,40 28,57 25,40 10” 10,31 14,30 17,45 21,41 25,40 28,57 33,32 25,40 12” 11,12 15,10 19,05 23,80 27,76 31,75 35,71 — 14” 12,70 16,70 21,41 26,19 30,94 36,52 40,46 — 16” 14,27 19,05 23,80 29,36 34,92 39,67 45,24 — 18” 15,06 20,60 26,19 32,54 38,10 44,45 49,99 — 20” — 22,23 28,58 34,93 41,28 47,63 53,98 — 22” 17,45 24,60 30,94 38,89 46,02 52,37 59,51 — 24” — — — — — — — — 26” — — — — — — — — 28” — — — — — — — — 30” 17,45 — — — — — — — 32” 17,45 — — — — — — — 34” 19,05 — — — — — — — 36” — — — — — — — — 38” — — — — — — — — 40” — — — — — — — — 42” — — — — — — — — 44” — — — — — — — — 46” — — — — — — — — 48”
75
Curve ASME (R=5 D)
ASME BendsTolleranze dimensionali: pag. 81
Curve con dimensioni o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Elbows with special thickness and size: on application (−)
A B K NPS D S = SCHEDULE SCH. STD SCH. XS SCH. 10 SCH. 20 SCH. 30 95,3 39,5 108,6 3/4” 26,7 2,87 3,91 — — — 127,0 52,6 143,7 1 33,4 3,38 4,55 — — — 158,8 65,8 179,9 11/4” 42,2 3,56 4,85 — — — 190,5 78,9 214,7 11/2” 48,3 3,68 5,08 — — 3,18 254,0 105,2 284,2 2 60,3 3,91 5,54 — — 3,18 317,5 131,5 354,0 21/2” 73,0 5,16 7,01 — — 4,78 381,0 157,8 425,5 3” 88,9 5,49 7,62 — — 4,78 444,5 184,1 495,3 31/2” 101,6 5,74 8,08 — — 4,78 508,0 210,4 565,2 4” 114,3 6,02 8,56 — — 4,78 635,0 263,0 705,7 5” 141,3 6,55 9,52 — — — 762,0 315,6 846,2 6” 168,3 7,11 10,97 — — — 1016,0 420,8 1125,6 8” 219,1 8,18 12,70 — 6,35 7,04 1270,0 526,1 1406,5 10” 273,0 9,27 12,70 — 6,35 7,80 1524,0 631,3 1685,9 12” 323,8 9,52 12,70 — 6,35 8,38 1778,0 736,5 1955,8 14” 355,6 9,52 12,70 6,35 7,92 9,52 2032,0 841,7 2235,2 16” 406,4 9,52 12,70 6,35 7,92 9,52 2286,0 946,9 2514,6 18” 457,2 9,52 12,70 6,35 7,92 11,12 2540,0 1052,1 2794,0 20” 508,0 9,52 12,70 6,35 9,52 12,70 2794,0 1157,3 3073,4 22” 558,8 9,52 12,70 6,35 9,52 12,70 3048,0 1262,5 3352,8 24” 609,6 9,52 12,70 6,35 9,52 14,25
[mm] [mm] [mm] [mm]
76
A
K
SB
B
S = SCHEDULE NPS SCH. 40 SCH. 60 SCH. 80 SCH. 100 SCH. 120 SCH. 140 SCH. 160 SCH. XXS 2,87 — 3,91 — — — 5,54 7,82 3/4” 3,38 — 4,55 — — — 6,35 9,09 1” 3,56 — 4,85 — — — 6,35 9,70 11/4”
3,68 — 5,08 — — — 7,14 10,16 11/2”
3,91 — 5,54 — — — 8,74 11,07 2”
5,16 — 7,01 — — — 9,52 14,02 21/2”
5,49 — 7,62 — — — 11,12 15,24 3” 5,74 — 8,08 — — — — — 31/2” 6,02 — 8,56 — 11,12 — 13,49 17,12 4” 6,55 — 9,52 — 12,70 — 15,87 19,05 5” 7,11 — 10,97 — 14,27 — 18,24 21,94 6” 8,18 10,30 12,70 15,06 18,24 20,62 23,01 22,22 8” 9,27 12,70 15,06 18,24 21,41 25,40 28,57 25,40 10” 10,31 14,30 17,45 21,41 25,40 28,57 33,32 25,40 12” 11,12 15,10 19,05 23,80 27,76 31,75 35,71 — 14” 12,70 16,70 21,41 26,19 30,94 36,52 40,46 — 16” 14,27 19,05 23,80 29,36 34,92 39,67 45,24 — 18” 15,06 20,60 26,19 32,54 38,10 44,45 49,99 — 20” — 22,23 28,58 34,93 41,28 47,63 53,98 — 22” 17,45 24,60 30,94 38,89 46,02 52,37 59,51 — 24”
77
78
Pesi [kg] short radius (R=1 D) Weights short radius (R=1 D)
Tolleranze dimensionali: pag. 81Curve con dimensioni o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Elbows with special thickness and size: on application (−)
D NPS S = SCHEDULE [mm] STD XS 10 20 30 40 60 80 100 120 140 160 XXS 21,3 1/2” — — — — — — — — — — — — — 26,7 3/4” — — — — — — — — — — — — — 33,4 1” 0,10 0,13 — — — 0,10 — 0,13 — — — 0,17 0,21 42,2 11/4” 0,17 0,22 — — — 0,17 — 0,22 — — — 0,28 0,39 48,3 11/2” 0,24 0,32 — — — 0,24 — 0,32 — — — 0,43 0,57 60,3 2” 0,44 0,60 — — — 0,44 — 0,60 — — — 0,90 1,10 73,0 21/2” 0,87 1,15 — — — 0,87 — 1,15 — — — 1,50 2,05 88,9 3” 1,35 1,83 — — — 1,35 — 1,83 — — — 2,60 3,10 101,6 31/2” 1,90 2,65 — — — 1,90 — 2,65 — — — — — 114,3 4” 2,60 3,60 — — — 2,60 — 3,60 — 4,60 — 5,40 6,60 141,3 5” 4,40 6,20 — — — 4,40 — 6,20 — 8,00 — 9,90 11,50 168,3 6” 7,00 10,00 — — — 7,00 — 10,00 — 13,00 — 16,00 19,00 219,1 8” 14,00 21,00 — 11,00 12,00 14,00 17,00 21,00 25,00 29,00 33,00 36,00 35,00 273,0 10” 24,00 33,00 — 17,00 21,00 24,00 33,00 39,00 46,00 54,00 62,00 70,00 62,00 323,8 12” 36,00 47,00 — 24,00 32,00 39,00 53,00 64,00 77,00 90,00 100,0 115,0 90,00 355,6 14” 46,00 61,00 31,00 39,00 46,00 53,00 71,00 90,00 110,0 126,0 142,0 160,0 — 406,4 16” 60,00 79,00 40,00 50,00 60,00 79,00 103,0 130,0 157,0 184,0 213,0 235,0 — 457,2 18” 76,00 100,0 51,00 64,00 88,00 113,0 148,0 185,0 223,0 262,0 300,0 332,0 — 508,0 20” 94,00 124,0 63,00 94,00 124,0 147,0 200,0 250,0 305,0 353,0 408,0 452,0 — 558,8 22” 114,0 151,0 77,00 114,0 151,0 — 260,0 330,0 400,0 464,0 530,0 591,0 — 609,6 24” 136,0 180,0 97,00 136,0 202,0 245,0 341,0 424,0 526,0 614,0 691,0 775,0 — 660,4 26” 158,0 210,0 — — — — — — — — — — — 711,2 28” 184,0 244,0 — — — — — — — — — — — 762,0 30” 211,0 281,0 — — — — — — — — — — — 812,8 32” 240,0 320,0 — — — — — — — — — — — 863,6 34” 271,0 361,0 — — — — — — — — — — — 914,4 36” 304,0 405,0 — — — — — — — — — — — 965,0 38” — — — — — — — — — — — — — 1016,0 40” 376,0 501,0 — — — — — — — — — — — 1066,8 42” — — — — — — — — — — — — — 1118,0 44” — — — — — — — — — — — — — 1168,4 46” 456,0 — — — — — — — — — — — — 1219,2 48” — — — — — — — — — — — — —
79
Pesi [kg] long radius (R=1,5 D) Weights long radius (R=1,5 D)
Tolleranze dimensionali: pag. 81Curve con dimensioni o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Elbows with special thickness and size: on application (−)
D NPS S = SCHEDULE [mm] STD XS 10 20 30 40 60 80 100 120 140 160 XXS 21,3 1/2” 0,08 0,10 — — — 0,08 — 0,10 — — — 0,12 0,15 26,7 3/4” 0,08 0,10 — — — 0,08 — 0,10 — — — 0,13 0,17 33,4 1” 0,15 0,19 — — — 0,15 — 0,19 — — — 0,25 0,33 42,2 11/4” 0,26 0,34 — — — 0,26 — 0,34 — — — 0,42 0,60 48,3 11/2” 0,36 0,49 — — — 0,36 — 0,49 — — — 0,65 0,86 60,3 2” 0,65 0,90 — — — 0,65 — 0,90 — — — 1,35 1,62 73,0 21/2” 1,30 1,71 — — — 1,30 — 1,71 — — — 2,25 3,00 88,9 3” 2,00 2,75 — — — 2,00 — 2,75 — — — 4,00 5,00 101,6 31/2” 3,00 4,00 — — — 3,00 — 4,00 — — — — — 114,3 4” 3,90 5,00 — — — 4,00 — 5,00 — 7,00 — 8,00 10,00 141,3 5” 7,00 9,00 — — — 7,00 — 9,00 — 12,00 — 15,00 18,00 168,3 6” 10,00 15,00 — — — 10,00 — 15,00 — 20,00 — 25,00 29,00 219,1 8” 21,00 31,00 — 16,00 18,00 21,00 26,00 31,00 37,00 44,00 49,00 55,00 52,00 273,0 10” 37,00 49,00 — 25,00 31,00 37,00 50,00 58,00 70,00 80,00 95,00 105,0 94,00 323,8 12” 54,00 71,00 — 36,00 47,00 58,00 80,00 95,00 115,0 135,0 150,0 175,0 135,0 355,6 14” 69,00 91,00 46,00 57,00 69,00 80,00 108,0 133,0 195,0 180,0 215,0 240,0 — 406,4 16” 90,00 119,0 61,00 75,00 90,00 119,0 155,0 196,0 240,0 276,0 320,0 360,0 — 457,2 18” 114,0 151,0 77,00 133,0 170,0 223,0 275,0 335,0 395,0 150,0 340,0 500,0 — 508,0 20” 141,0 186,0 95,00 141,0 186,0 220,0 300,0 375,0 460,0 530,0 610,0 680,0 — 558,8 22” 171,0 226,0 115,0 171,0 226,0 — 390,0 495,0 595,0 695,0 795,0 890,0 — 609,6 24” 203,0 270,0 136,0 203,0 302,0 370,0 512,0 640,0 790,0 920,0 1035,0 1165,0 — 660,4 26” 237,0 315,0 200,0 317,0 405,0 — — — — — — — — 711,2 28” 275,0 366,0 232,0 368,0 458,0 — — — — — — — — 762,0 30” 316,0 421,0 265,0 422,0 526,0 — — — — — — — — 812,8 32” 360,0 480,0 302,0 482,0 600,0 660,0 — — — — — — — 863,6 34” 407,0 545,0 342,0 544,0 680,0 745,0 — — — — — — — 914,4 36” 457,0 608,0 382,0 610,0 760,0 910,0 — — — — — — — 965,0 38” 509,0 678,0 — — — — — — — — — — — 1016,0 40” 564,0 752,0 — — — — — — — — — — — 1066,8 42” 622,0 828,0 — — — — — — — — — — — 1118,0 44” 683,0 911,0 — — — — — — — — — — — 1168,4 46” 814,0 1085,0 — — — — — — — — — — — 1219,2 48” 849,0 1132,0 — — — — — — — — — — —
80
Pesi [kg] (R=3 D) Weights (R=3 D)
Tolleranze dimensionali: pag. 81Curve con dimensioni o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 81Elbows with special thickness and size: on application (−)
D NPS S = SCHEDULE [mm] STD XS 10 20 30 40 60 80 100 120 140 160 XXS 21,3 1/2” — — — — — — — — — — — — — 26,7 3/4” — — — — — — — — — — — — — 33,4 1” — — — — — — — — — — — — — 42,2 11/4” — — — — — — — — — — — — — 48,3 11/2” — — — — — — — — — — — — — 60,3 2” 1,30 1,79 — — — — — — — — — — — 73,0 21/2” — — — — — — — — — — — — — 88,9 3” 4,06 5,45 — — — — — — — — — — — 101,6 31/2” — — — — — — — — — — — — — 114,3 4” 7,70 10,69 — — — — — — — — — — — 141,3 5” — — — — — — — — — — — — — 168,3 6” 20,29 30,55 — — — — — — — — — — — 219,1 8” 40,77 61,94 — — — — — — — — — — — 273,0 10” 72,17 97,58 — — — — — — — — — — — 323,8 12” 106,8 140,0 — — — — — — — — — — — 355,6 14” 136,3 180,0 — — — — — — — — — — — 406,4 16” 179,0 236,0 — — — — — — — — — — — 457,2 18” — — — — — — — — — — — — — 508,0 20” — — — — — — — — — — — — — 558,8 22” — — — — — — — — — — — — — 609,6 24” — — — — — — — — — — — — — 660,4 26” — — — — — — — — — — — — — 711,2 28” — — — — — — — — — — — — — 762,0 30” — — — — — — — — — — — — — 812,8 32” — — — — — — — — — — — — — 863,6 34” — — — — — — — — — — — — — 914,4 36” — — — — — — — — — — — — — 965,0 38” — — — — — — — — — — — — — 1016,0 40” — — — — — — — — — — — — — 1066,8 42” — — — — — — — — — — — — — 1118,0 44” — — — — — — — — — — — — — 1168,4 46” — — — — — — — — — — — — — 1219,2 48” — — — — — — — — — — — — —
Tolleranze dimensionali a norme ASME B16.9
Dimensional tolerances according to ASME B16.9 standards
81
Curve 45° e 90° Per tutti i raccordi Pezzi a T Riduzioni Curve a 180° Fondelli For all fittings 45°- 90° Reducers 180° Elbows Caps Elbows Tees
+ 1,6 1/2 ÷ 21/2
± 0,8 ± 2 ± 2 ± 6 ± 6 ± 1 ± 3 - 0,8
3 ÷ 31/2 + 1,6 ± 1,6 ± 2 ± 2 ± 6 ± 6 ± 1 ± 3
4 + 1,6 ± 1,6 ± 2 ± 2 ± 6 ± 6 ± 1 ± 3
+ 2,4 5 ÷ 8 ± 1,6 ± 2 ± 2 ± 6 ± 6 ± 1 ± 6 - 1,6
+ 4,0 10 ÷ 18 ± 3,2 ± 2 ± 2 ± 10 ± 6 ± 2 ± 6 - 3,2
+ 6,4
20 ÷ 24 ± 4,8 ± 2 ± 2 ± 10 ± 6 ± 2 ± 6 - 4,8
+ 6,4
26 ÷ 30 ± 4,8 ± 3 ± 5 — — — ± 10 - 4,8
+ 6,4
32 ÷ 48 ± 4,8 ± 5 ± 5 — — — ± 10 - 4,8
Plain Bevel ASME B16.25 fig. 2aFittings having S < 22 mm
Compound Bevel ASME B16.25 fig. 3aFittings having S > 22 mm
(−) a richiesta
(−) on application
NPS Nominal Pipe size
D Outside diam. at the bevel
I.D. Inside diam.
at end
S Thickness
Non inferiore87,5% dellospess. nom.
Not less than87,5% of the
nom. thickness
Centro ad estremità
Center to end
Lunghezza Length
Al centro To centre
Altezza Height
Altezza Height
Allineamentoalle estremità
Alignmentof ends
Curve EN/DIN/ISO EN/DIN/ISO Elbows and Bends
83
Secondo gli standard: According to:
• ISO 3419
• DIN 2605-1 / 2609 ST 35.8 - ST 37.0 W
• EN 10253-1 S 235
• EN 10253-2 P235GH - P265GH
Curve EN/DIN/ISO (R=1,5 D)
EN/DIN/ISO Elbows model 3DTolleranze dimensionali: pag. 92
Curve con dimensioni o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 92Bends with special thickness and size: on application (−)
84
DN A K C D S S 15 21,3 2,0 — 38,0 49,0 76,0 20 26,9 2,3 — 38,0 51,0 76,0 25 33,7 2,6 — 38,0 56,0 76,0 — 38,0 2,6 — 45,0 64,0 90,0 32 42,4 2,6 — 48,0 69,0 96,0 — 44,5 2,6 — 51,0 73,5 102,0 40 48,3 2,6 — 57,0 82,0 114,0 — 51,0 2,6 — 63,0 88,0 126,0 — 57,0 2,9 — 72,0 100,0 144,0 50 60,3 2,9 — 76,0 106,0 152,0 — 70,0 2,9 — 92,0 127,0 184,0 65 76,1 2,9 — 95,0 133,0 190,0
— 82,5 3,2 — 107,5 149,0 215,0 80 88,9 3,2 — 114,0 159,0 228,0 — 101,6 3,6 — 133,5 184,0 267,0 — 108,0 3,6 — 142,5 196,0 285,0 100 114,3 3,6 — 152,0 210,0 304,0 — 133,0 4,0 — 181,0 247,0 362,0 125 139,7 4,0 — 190,0 260,0 380,0 — 159,0 4,5 — 216,0 295,0 432,0 150 168,3 4,5 — 229,0 313,0 457,0 — 193,7 5,6 — 270,0 367,0 540,0 200 219,1 6,3 4,5 305,0 414,0 610,0 — 244,5 6,3 5,6 340,0 462,0 680,0 250 273,0 6,3 5,6 381,0 518,0 762,0
300 323,9 7,1 6,3 457,0 619,0 914,0
Senza Saldatura Seamless
Saldato Welded
[mm] [mm] [mm][mm]
85
DN
A
K
C
D S S 350 355,6 8,0 6,3 533,0 711,0 1066,0
— 368,3 8,0 6,3 534,0 717,0 1068,0 400 406,4 8,8 6,3 610,0 813,0 1220,0 — 419,0 8,8 6,3 610,0 819,0 1218,0 450 457,0 10,0 6,3 686,0 914,0 1372,0 500 508,0 11,5 6,3 762,0 1016,0 1524,0 550 559,0 12,5 6,3 838,0 1118,0 1676,0 600 610,0 12,5 6,3 914,0 1219,0 1828,0 650 660,0 12,5 — 990,0 1320,0 1980,0 700 711,0 12,5 7,1 1067,0 1422,0 2134,0 750 762,0 12,5 — 1143,0 1524,0 2286,0 800 813,0 12,5 8,0 1219,0 1626,0 2438,0 850 864,0 12,5 — 1296,0 1728,0 2592,0 900 914,0 12,5 — 1372,0 1829,0 2744,0
Senza Saldatura Seamless
Saldato Welded
[mm] [mm] [mm][mm]
Curve EN/DIN/ISO (R=2,5 D)
EN/DIN/ISO Elbows model 5DTolleranze dimensionali: pag. 92
Curve con dimensioni o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 92Bends with special thickness and size: on application (−)
A
S
KR
86
DN D A K S S 15 21,3 2,0 — 42,5 53
20 26,9 2,3 — 57,5 71,0 25 33,7 2,6 — 72,5 89,0 — 38,0 2,6 — 82,5 101,0 32 42,4 2,6 — 92,5 114,0 40 48,3 2,6 — 109,5 134,0 — 51,0 2,6 — 122,5 149,0 — 57,0 2,9 — 130,0 158,0 50 60,3 2,9 — 137,5 168,0 — 70,0 2,9 — 160,0 195,0 65 76,1 2,9 — 175,0 213,0 80 88,9 3,2 — 207,5 252,0 — 101,6 3,6 — 235,0 286,0 — 108,0 3,6 — 253,0 306,0 100 114,3 3,6 — 270,0 327,0 — 133,0 4,0 — 311,5 378,0 125 139,7 4,0 — 330,0 400,0 — 159,0 4,5 — 375,0 454,0 150 168,3 4,5 — 390,0 474,0 — 193,7 5,6 — 455,0 552,0 200 219,1 6,3 4,5 515,0 624,0 — 244,5 6,3 5,6 580,0 702,0 250 273,0 6,3 5,6 650,0 786,0 300 323,9 7,1 6,3 770,0 932,0
Senza Saldatura Seamless
Saldato Welded
[mm] [mm][mm]
87
A K DN D S S 350 355,6 8,0 6,3 850,0 1028,0
— 368,3 8,0 6,3 880,0 1064,0 400 406,4 8,8 6,3 970,0 1173,0 — 419,0 8,8 6,3 1000,0 1350,0 450 457,0 10,0 6,3 1122,0 1350,0 500 508,0 11,5 6,3 1254,0 1500,0 550 559,0 12,5 6,3 1398,0 1677,0 600 610,0 12,5 6,3 1525,0 1830,0 650 660,0 12,5 — 1650,0 1980,0 700 711,0 12,5 7,1 1778,0 2133,0 750 762,0 12,5 — 1905,0 2286,0 800 813,0 12,5 8,0 2033,0 2439,0 850 864,0 12,5 — 2155,0 2587,0 900 914,0 12,5 — 2285,0 2742,0
Senza Saldatura Seamless
Saldato Welded
[mm][mm] [mm]
Curve DIN (R=5 D)
DIN Bends model 10DTolleranze dimensionali: pag. 92
Curve con dimensioni o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 92Bends with special thickness and size: on application (−)
88
A
S
KR
A K DN D S S
20 26,9 2,3 — 95,0 109,0 25 33,7 2,6 — 127,0 144,0 32 42,4 2,6 — 159,0 180,0 40 48,3 2,6 — 190,0 214,0 50 60,3 2,9 — 254,0 284,0 65 76,1 2,9 — 318,0 356,0 80 88,9 3,2 — 381,0 425,0 — 101,6 3,6 — 455,0 496,0 100 114,3 3,6 — 508,0 565,0 125 139,7 4,0 — 635,0 705,0 150 168,3 4,5 — 762,0 846,0 — 193,7 5,4 — 889,0 986,0 200 219,1 6,3 4,5 1016,0 1126,0 250 273,0 6,3 5,6 1270,0 1407,0 300 323,9 7,1 6,3 1524,0 1686,0 350 355,6 8,0 6,3 1778,0 1956,0 — 368,3 8,0 6,3 1778,0 1956,0 400 406,4 8,8 6,3 2032,0 2235,0 — 419,0 8,8 6,3 2095,0 2304,0 450 457,0 10,0 6,3 2286,0 2515,0 500 508,0 11,5 6,3 2540,0 2794,0 600 610,0 12,5 6,3 3050,0 3355,0 700 711,0 12,5 7,1 3555,0 3911,0 800 813,0 12,5 8,0 4065,0 4472,0 900 914,0 12,5 — 4570,0 5027,0
Senza Saldatura Seamless
Saldato Welded
[mm][mm] [mm]
≥≤
21,3 0,04
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
— — — — — — — — — — — — — — — — —— — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — —— — — — — — — — — — — — — — — — —
0,060,11
0,19
0,26
0,49
0,78
1,211,822,072,35
3,614,00
5,816,52
11,0014,00
24,0036,0046,00
61,00
77,0095,00
119,0160,0188,0115,0
136,0226,0265,0
82,0085,00
57,0059,00
36,00 40,00
[mm]D 2,0 2,3 2,6 2,9 3,2 3,6 4,0 4,5 5,4 5,9 6,3 7,1 8,0 8,8 10,0 11,0 12,5
26,933,738,042,444,548,351,057,060,370,076,182,588,9
101,6108,0114,3133,0139,7159,0168,3193,7219,1244,5273,0323,9355,6368,3406,4419,0457,0508,0559,0610,0660,01219,0
Tolleranze dimensionali: pag. 92Curve con dimensioni o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 92Elbows with special thickness and size: on application (−)
Pesi [kg] EN/DIN/ISO (R=1,5 D)
Weights EN/DIN/ISO (R=1,5 D)
89
S
Pesi [kg] EN/DIN/ISO (R=2,5 D) Weights EN/DIN/ISO (R=2,5 D)
Tolleranze dimensionali: pag. 92Curve con dimensioni o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 92Elbows with special thickness and size: on application (−)
21,3 0,07
— — — — — — — — — — — — — — — — —
0,130,20
0,37
2,0 2,3 2,6 2,9 3,2 3,6 4,0 4,5 5,4 5,9 6,3 7,1 8,0 8,8 10,0 11,0 12,5
26,933,738,042,4
— — — — — — — — — — — — — — — — —— — — — — — — — — — — — — — — — —
0,50
0,90
1,44
48,351,057,060,370,076,1
— — — — — — — — — — — — — — — — —— — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — —— — — — — — — — — — — — — — — — —
2,203,203,704,20
6,207,00
10,0011,00
18,00
26,0042,00
140,0264,0
364,0434,0
98,00131,0
67,0091,00
88,9101,6108,0114,3133,0139,7159,0168,3193,7219,1244,5273,0323,9355,6368,3406,4419,0457,0508,0559,0610,0
≥≤
660,01219,0
—
90
S
[mm]D
Pesi [kg] EN/DIN/ISO (R=5 D) Weights EN/DIN/ISO (R=5 D)
Tolleranze dimensionali: pag. 92Curve con dimensioni o spessori particolari: a richiesta (−)
Dimensional tolerances: pag. 92Elbows with special thickness and size: on application (−)
2,0 2,3 2,6 2,9 3,2 3,6 4,0 4,5 5,4 5,9 6,3 7,1 8,0 8,8 10,0 11,0 12,5
26,933,742,4
0,8748,31,6460,3
76,14,0588,9
101,67,84114,3
133,0139,7
— — — — — — — — — —— — — — — — — — — —— — — — — — — — — —— — — — — — — — — — — —
———
———
————
————
————
————
— — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — —— — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — ———
——
——
——
——
——
——
— ——
——
——
——
——
——
——
——
——
——
——
——
——
——
— ——
——
——
——
——
——
——
——
——
——
——
——
——
——
——
— ——
——
——
——
——
——
——
——
——
——
——
——
———
———
—
—
— — — — — — — — — — — — — —— — — — — — — — — — — — —— — — — — — — — — — — — —
21,76168,3193,7219,1
— — — — — — — — — — — — — — — —— — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — —— — — — — — — — — — — — — — — — —— — — — — — — — — — — — — — — — —— — — — — — — — — — — — — — — — —— — — — — — — — — — — — — — — — —— — — — — — — — — — — — — — — — —— — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — —— — — — — — — — — — — — — — — — —— — — — — — — — — — — — — — — — —— — — — — — — — — — — — — — — — —— — — — — — — — — — — — — — — — —
82,6652,76
118,1367,00
273,0323,9355,6368,3406,4419,0457,0508,0558,0610,0
813,0914,0
1016,01120,01420,01620,0
—711,0
91
S
[mm]D
Tolleranze dimensionali a norme EN/DIN/ISO
Dimensional tolerances according to EN/DIN/ISO standards
Bevel EN/DIN/ISOFittings having 3 < S < 22 mm
For wall thickness above 22 mmthe type of bevel shall be agreed
(−) a richiesta
(−) on application
92
30°
A A A K Per tutti i raccordi Curve 90° Curve 90° Curve a 180° Curve a 180° For all fittings 90° Bends 90° Bends 180° Bends 180° Bends 3D / 5D 10D 3D 3D
+ 1,6 15 - 40 ± 0,8 ± 2 ± 5 ± 7 ± 7 - 0,8
50 - 100 + 1,6 ± 1,6 ± 2 ± 10 ± 7 ± 7
+ 2,4 125 - 200 ± 1,6 ± 2 ± 25 ± 7 ± 7 - 1,6
+ 4,0 250 - 450 ± 3,2 ± 3 ± 40 ± 10 ± 7 - 3,2
+ 6,4
500 - 600 ± 4,8 ± 3 ± 50 ± 10 ± 10 - 4,8
+ 6,3 650 - 750 ± 4,8 ± 3 ± 80 ± 10 — - 4,8
+ 6,4
800 - 900 ± 4,8 ± 5 ± 100 ± 10 — - 4,8
DN Nominal
size
D Outside diam. at the bevel
I.D. Inside diam.
at end
S Thickness
Non inferiore87,5% dellospess. nom.
Not less than87,5% of the
nom. thickness
Centro ad estremità
Center to end
Lunghezza Length
Centro ad estremità
Center to end
Altezza Height
I dati in catalogo si riferiscono all’ultima edizione disponibile delle rispettive normative;i dati possono cambiare senza preavviso.
The data reported in this catalogue refer to the last available edition of their regulations;the data can change without notice.