HR_TM_300 Time Management v7 1
HR_TM_300 Time Management v7 1
Time ManagementHR_TM_300
HR_TM_300 Time Management v7 2
Course Prerequisites and RolesCourse Prerequisites and Roles•Prerequisites
UK_100 - IRIS/SAP Awareness and NavigationHR_200 - HR Overview
•RolesUsers responsible for the recording and reporting of working times and absences Supervisors needing to understand the overall process, especially the approval of timeUsers needing to display leave accrual and balance information
HR_TM_300 Time Management v7 2
HR_TM_300 Time Management v7 3
Course ContentCourse Content•Unit 1 - Time Management Overview•Unit 2 – CATS Time Entry•Unit 3 – CATS Time Entry with Cost Allocation•Unit 4 – Selection Variants•Unit 5 – Approval & Transfer of Time•Unit 6 – Absence Quotas•Unit 7 – Displays & Reports
HR_TM_300 Time Management v7 4
Course Learning ObjectivesCourse Learning Objectives•Become familiar with the IRIS Time Management
processes and terminology•Gain an understanding of and be able to execute the
three steps involved in the time entry process•Create selection variants for working with multiple
employees•Be able to work through various system messages•Learn how to display absence
quotas (leave balances) and process various pay-outs upon termination or retirement from the University
HR_TM_300 Time Management v7 3
HR_TM_300 Time Management v7 5
Unit 1Unit 1
Time Management Overview
HR_TM_300 Time Management v7 6
Time ManagementTime Management•Time Management provides support for all processes
involved in the planning, recording, and reporting of employee working times (attendances) and absences
•Time Management is integrated with Personnel Administration to obtain and validate information on working hours and leave quotas for absences
•There is also integration with Payroll - Hours entered, approved, and transferred are automatically released to the Payroll Department to be processed
HR_TM_300 Time Management v7 4
HR_TM_300 Time Management v7 7
Key BenefitsKey Benefits•Default Target Hours for hourly employees (based on
their work schedule) can be easily applied to the time entry screen to lessen the amount of manual data entry
•Overtime is automatically calculated by the system based on all hours entered within one week’s time
•Vacation, TDL, and Holiday/Bonus Day leave is both accrued and tracked in IRIS (excluding Faculty, Post Doc Scholars and Housestaff employees)
•Many on-line reporting capabilities are available
HR_TM_300 Time Management v7 8
Time Management InfotypesTime Management Infotypes•Planned Working Time (0007)•Absences (2001)•Attendances (2002)•Time Quota Compensation (0416) – Vacation, TDL, and
Holiday Payouts•Quota Corrections (2013) – Employee Relations use only
HR_TM_300 Time Management v7 5
HR_TM_300 Time Management v7 9
Time Management DataTime Management Data•Some time-related data is established in an employee’s
IRIS-HR master data record and is used throughout the time entry process:
Planned Working Time (daily Target Hours)Period Work ScheduleAbsence Quotas (Vacation, TDL, Holiday/Bonus Days, and Military Leave balances)
HR_TM_300 Time Management v7 10
Infotype 0007 Infotype 0007 -- Planned Working TimePlanned Working Time•Normal work schedule information for an employee -
Used to determine an hourly employee’s Target Hours•The Time Mgmt status determines how the employee will
be paid; by actual times entered or by the planned times in the work schedule
HR_TM_300 Time Management v7 6
HR_TM_300 Time Management v7 11
Work Schedule RulesWork Schedule Rules•Some examples:
FI1C = 8 h/d – 40 h/w – M-FFI2C = 7.5 h/d – 37.5 h/w – M-F
FL1C = 8 h/d – 40 h/w – S-SFL2C = 7.5 h/d – 37.5 h/w – S-SFL3C = 10 h/d – 40 h/w – S-SFL4C = 12 h/d – 40 h/w – S-SFL6C = 24X7 flex
• If Target Hours are used, the number of hours per day in the rule will be “entered” on the days noted in the rule
•Any number of hours worked can be entered on any day, but a Warning message will appear if the hours entered exceed the hours listed or are on a day not in the rule
Fixed Work Schedule Rules
Flexible Work Schedule Rules
HR_TM_300 Time Management v7 12
Flexible Work Schedule RulesFlexible Work Schedule Rules•Flexible Work Schedule Rules allow for a more varied work
schedule outside the default set-up in the Planned Working Time Infotype (0007) for a period of time or indefinitely
•Mainly allows leave to be entered up to 7 days a week and up to the appropriate number of hours per day for the employee:
If an employee is set to 8 h/d – 40 h/w – M-F, you cannot enter more than eight hours of vacation/TDL on any day Monday through FridaySo, if this employee works four 10-hour days (Saturday through Tuesday) and needs to claim/use ten hours of vacation or TDL on any of those four days, you would need to change to the 10 h/d – 40 h/w – S-S schedule
•NOTE: Changed only through an FTE Change action in PA40 by the main HR employee in the department
HR_TM_300 Time Management v7 7
HR_TM_300 Time Management v7 13
Work Schedule Rule WarningWork Schedule Rule Warning•Do not change a Work Schedule Rule effective on a date in
which time has already been entered!Doing so would cause IRIS to change the hours which have already been entered to values much greater than might be expected or desired!
•Change a Work Schedule Rule effective on a date on which time has not already been entered on/past that date!
HR_TM_300 Time Management v7 14
IRIS Payroll SchedulesIRIS Payroll Schedules•The IRIS Biweekly/Monthly Payroll Schedules are available
on the UK Payroll web site:http://www.uky.edu/EVPFA/Controller/prlhome
•For each Payroll Period, the schedules include:Dates when HR documents are due in Compensation in order for employees to be paid that Pay PeriodDates/Time Input Deadlines for Preliminary, Trial & Final Payroll RunsPayroll Period Begin, End, and Pay DatesPayroll Period Numbers - based on the calendar year
HR_TM_300 Time Management v7 8
HR_TM_300 Time Management v7 15
IRIS Payroll Schedules ExampleIRIS Payroll Schedules Example
HR_TM_300 Time Management v7 16
Payroll LocksPayroll Locks•Used during Biweekly and Monthly payroll processing•Starts with the Trial Payroll Run up to the Final Payroll Run•Allows Payroll/IRIS HR Team to either make corrections
and/or run payroll•Time may be entered (CAT2) and approved
(CATS_APPR_LITE), but cannot be transferred (ZCAT6)
HR_TM_300 Time Management v7 9
HR_TM_300 Time Management v7 17
Time EvaluationTime Evaluation•Automatic process run nightly that:
Analyzes attendances/absences and compares that with the employee’s Period Work Schedule and other employee master dataReports any errorsCalculates overtimeMaintains quota accruals and usage
Employee Master Data Period Work Schedule
TimeEvaluation
TimeEvaluation
Time Recording
HR_TM_300 Time Management v7 18
ThreeThree--Step Time Entry ProcessStep Time Entry Process
1. Time is entered in CATS using CAT2
2. Time is approved in CATS using CATS_APPR_LITE
3. Time is transferred from CATS to IRIS-HR using ZCAT6
HR_TM_300 Time Management v7 10
HR_TM_300 Time Management v7 19
Unit 1 SummaryUnit 1 SummaryAny questions related to:•Time Management overview and key benefits•Time Management data and Infotypes•Planned Working Time•Period Work Schedule•Work Schedule Rule• IRIS Payroll Schedules•Payroll Locks•Time Evaluation•Time Entry Process
HR_TM_300 Time Management v7 20
Unit 2Unit 2
CATS Time Entry
HR_TM_300 Time Management v7 11
HR_TM_300 Time Management v7 21
Cross Application Time Sheet Cross Application Time Sheet -- CATSCATS•SAP-recommended module/interface for entering time
into the system so that it can be processed for Payroll•Main “gateway” into the time entry area of the system•Same “look and feel” as other IRIS screens and
transactions
HR_TM_300 Time Management v7 22
•Time can be entered on a daily basis – OR - once per pay period, just as long as it is entered by the required time input deadlines listed on the Payroll Schedule
•Time can be entered in increments of one one-hundredth of an hour (.01 hour) – quarter of an hour increments would be ideal (0.25)
•Attendance/Absences Types of any kind need to be entered on separate lines
•Time entered in CATS for hourly employees must match the employee’s signed “IRIS Daily Time Record”
Time Entry BasicsTime Entry Basics
HR_TM_300 Time Management v7 12
HR_TM_300 Time Management v7 23
IRIS Daily Time Record (Hourly Employees)IRIS Daily Time Record (Hourly Employees)•Payroll has three approved versions of the Daily Time
Record (time sheet) - available on the UK Forms site: http://www.uky.edu/IRIS/HR/hr_forms.html
Timesheet – HospitalTimesheet – CampusTimesheet – Campus (without Cost Allocation)
•Other versions must be approved by Payroll prior to use
•May be completed “on-line” (in Excel) – the Total values will automatically be calculated as the time is entered
•Lists the commonly used Attendance/Absence Types at the bottom for easy reference
HR_TM_300 Time Management v7 24
IRIS Daily Time Record ExampleIRIS Daily Time Record Example•Week 1 - “Campus (Without Cost Allocation)” version:
HR_TM_300 Time Management v7 13
HR_TM_300 Time Management v7 25
Data Entry Profiles and the Key DateData Entry Profiles and the Key Date•A Data Entry Profile field determines the layout of the CAT2
Time Sheet: Data Entry View screenUK Biweekly Time – two weeks for hourly employeesUK Monthly Time – a month for salaried employeesUK Biweekly Time with Cost Allocation – for hourly employees who have all or part of their time temporarily charged to a different cost object other than the default allocation established for the employee/position (Infotype 0027)UK Monthly Time with Cost Allocation – Currently not usedPM…/Facilities… profiles are for Physical Plant/Housing employees
•The Key Date field indicates the beginning date of the pay period – this field must always be accurate!
HR_TM_300 Time Management v7 26
Hourly Employee Time EntryHourly Employee Time Entry
1. Enter transaction code CAT22. Click on the Possible Entries
icon in the Data Entry Profilefield
3. Double-click on the UK Biweekly Time profile
4. Press the Enter key
2
NOTE: This Initial Screenappears only the first time you enter CAT2 after logging into IRIS.
3
HR_TM_300 Time Management v7 14
HR_TM_300 Time Management v7 27
Hourly Employee Time EntryHourly Employee Time Entry5. Enter the first date of the
payroll period in the Key date field:
For the Biweekly profiles, the Key date is always a SundayFor the Monthly profiles, the Key date is always the first day of the month
6. Click on the Personnel Selection pushbutton to choose an employee
5
6
HR_TM_300 Time Management v7 28
Hourly Employee Time EntryHourly Employee Time Entry7. Enter the employee’s
Personnel Number in the Selection section – or use the Possible Entries icon to search if unknown
8. Click on the Execute icon in the Application Toolbar
NOTE: Multiple Employee selection is possible, but will be covered in the Selection Variants unit.
7
8
HR_TM_300 Time Management v7 15
HR_TM_300 Time Management v7 29
Hourly Employee Time EntryHourly Employee Time Entry9. Click on the green Select
All Persons icon in the Application Toolbar – OR - click on the gray box to the left of the Personnel Number column to select the employee
10.Click on the Enter Times icon (pencil) also in the Application Toolbar, which will take you to the Time Sheet: Data Entry View screen
9
10
HR_TM_300 Time Management v7 30
Attendance/Absence TypesAttendance/Absence Types•Attendance/Absence Types are used to associate the type
of compensation with the hours entered•Specific for each employee based on their Organizational
Assignment master data•1xxx = Attendance Types•3xxx = Shift Differential/On Call (Attendance Types)•7xxx = Absence Types (Vacation, TDL, Holiday, etc…)•For example:
1005 = Regular Hours Worked3311 = Diff Evening Shift7150 = Holiday7170 = Vacation7180 = Full Sal Sick (TDL) – Employee
HR_TM_300 Time Management v7 16
HR_TM_300 Time Management v7 31
Attendances/AbsencesAttendances/Absences•Can be recorded in partial day or full day amounts•Some attendances/absences influence pay:
Hours in excess of 40 hours per week (overtime)Shift differentialUnpaid leave
•Some absences influence quota balances:VacationTemporary Disability Leave (TDL)Holiday/Bonus DaysMilitary Leave
•Other absences are for statistical purposes:Jury DutyFuneral Leave
HR_TM_300 Time Management v7 32
Hourly Employee Time EntryHourly Employee Time Entry11.Click on the Target Hours icon
12.Click the Yes pushbutton in the Target hours pop-up window
13.If no changes need to be made to the time displayed, click on the Save icon in the Standard Toolbar
• Alternatively, time may be entered manually.
12
11Gray Target Hours row is
only a “forecast” of time worked based on Infotype 0007
HR_TM_300 Time Management v7 17
HR_TM_300 Time Management v7 33
Hourly OvertimeHourly Overtime•An employee’s total number of hours worked daily are
entered in the regular Hours Worked row (1005)• IRIS automatically calculates the overtime (based on
federal and state requirements using averages weighted rate algorithm) per week and the employee will automatically be paid accordingly
•For employees with multiple assignments the system will recognize where (in which assignment) the overtime occurred and then apply the correct rate
•Hours in excess of 40 that are worked in a prime assignment are charged to that assignment’s department
•Other hours over 40 are distributed to other assignment departments on a pro rata basis
HR_TM_300 Time Management v7 34
Hourly OvertimeHourly Overtime• Any time the number of hours entered on a day exceeds
the Target Hours, you will receive the following Warning message screen when you click on the Save icon
• If the hours entered are accurate, click on the Continue icon (green checkmark) to accept and save the data
Click on the Cancel icon to cancel the Save and return to
the time sheet1
HR_TM_300 Time Management v7 18
HR_TM_300 Time Management v7 35
University Differential Pay RatesUniversity Differential Pay Rates•The approved differential pay rates for the University are
maintained in a table in the IRIS system•Some examples:
3311 - Diff Evening Shift $0.753312 - Diff Night Shift $1.253331 - Call Pay $0.63
•Enter the number of hours along with the appropriate Attendance Type
•Regular Hours Worked (1005) must be entered also!Example: If an employee works an 8-hour shift and four of those hours should also be paid with the Evening Shift Differential pay, enter “8” hours of 1005 AND “4” hours of 3311 for that day
HR_TM_300 Time Management v7 36
Unit 2 ExerciseUnit 2 Exercise•Complete the following exercise:
2.1 – CATS Time Entry – Hourly Employee
HR_TM_300 Time Management v7 19
HR_TM_300 Time Management v7 37
Exception TimeException Time•Exception Time is any time not considered as regular
Hours Worked (1005)•For example:
Vacation LeaveTemporary Disability LeaveHoliday/Bonus Day LeaveFuneral LeaveMilitary LeaveFamily Medical LeaveJury Duty
HR_TM_300 Time Management v7 38
Hourly Employee Exception TimeHourly Employee Exception Time1. Enter the employee’s Personnel Number in the next
available row and press Enter (name will appear)2. Enter the appropriate Attendance/Absence Type3. Tab to the desired date and enter the number of hours4. Edit the hours in the Attendance Type 1005 row
accordingly and press Enter5. Click on the Save icon in the Standard Toolbar
4
3
21
Use Possible Entries icon to search for those A/A Types applicable to this employee
TIP: Use the Tab or Shift+Tab key(s) to scroll forward/back through the columns
HR_TM_300 Time Management v7 20
HR_TM_300 Time Management v7 39
Insufficient Quota MessageInsufficient Quota Message•Received when the Save icon is clicked and an employee
does not have enough Vacation, TDL, Holiday, or Military Leave quota for the hours entered
•Received if an employee has not completed their “new hire” orientation period and Vacation time is entered, even though Vacation quota is accrued
TDL and Holiday quota may be entered during this period•The appropriate adjustments need to be made before the
system will save the data
HR_TM_300 Time Management v7 40
Displaying Totals RowDisplaying Totals Row•Nothing in the Target Hours row will change during time
entry, thus it does not reflect the Total number of hours you have entered for an employee
•Click on the Totals Row On/Off icon in the Application Toolbar to see the true Total number of hours you have entered
Target Hours row
Total Hours row
Totals Row On/Off icon
Total number of hours you have entered for
this employee
HR_TM_300 Time Management v7 21
HR_TM_300 Time Management v7 41
Hourly Employee Hourly Employee -- Exception Time TipException Time Tip• To eliminate the need to always adjust the regular Hours
Worked row (1005):1. Enter your Exception Time FIRST2. Then click on the Target Hours icon in the Application
Toolbar to bring in the regular Hours Worked row (1005)3. The system will have automatically made the necessary
adjustments in the 1005 row
HR_TM_300 Time Management v7 42
Unit 2 ExerciseUnit 2 Exercise•Complete the following exercise:
2.2 – CATS Time Entry – Hourly Exception Time
HR_TM_300 Time Management v7 22
HR_TM_300 Time Management v7 43
Salaried Employee Time EntrySalaried Employee Time Entry• It is necessary to enter ONLY Exception Time using the
UK Monthly Time Data Entry Profile• If a salaried employee works all regular hours the entire
month, no action is necessary in IRIS – the system will automatically pay them their monthly salary
•Exception Time of any kind needs to be entered on separate lines using the appropriate Absence Types
HR_TM_300 Time Management v7 44
Salaried Employee Exception TimeSalaried Employee Exception Time• Instead of the Target Hours row, the Totals row is
displayed as the top row on the screen1. Enter the Personnel Number and press the Enter key2. Enter the appropriate Attendance/Absence Type3. Enter the hours on the appropriate date(s)4. Click on the Save icon
• There is no need to adjust any Regular Hours – the Time Evaluation process will handle all the adjustments
This Total is from the hours manually entered on this screen – the remaining (133.33) hours for the month will still be paid automatically
HR_TM_300 Time Management v7 23
HR_TM_300 Time Management v7 45
Holiday Leave Time EntryHoliday Leave Time Entry•Holiday leave is entered using Absence Type of 7150 on
the date in which Holiday quota is used – whether it’s on the actual holiday or not – for both hourly and salaried employees
•Examples of Holiday leave taken ON the actual holiday:
•Hourly =
•Salaried =
HR_TM_300 Time Management v7 46
Holiday Leave Time EntryHoliday Leave Time Entry• If an hourly employee works on a holiday, that time is
entered with Attendance Type 1005•If a salaried employee works on a holiday, nothing is done
in CATS (the employee is automatically paid for that day)
•The non-holiday day in which an hourly/salaried employee uses the Holiday quota is entered with Absence Type 7150
•Hourly example:
HR_TM_300 Time Management v7 24
HR_TM_300 Time Management v7 47
Holiday Leave Time EntryHoliday Leave Time Entry• If an hourly employee is not eligible for holiday leave
and/or regular time pay ON a holiday, enter nothing on that day
Alternatively, for reporting purposes, you may use Absence Type 7420, Unpaid Leave, and the correct number of hours ON the actual holiday
• If a salaried employee is not eligible for holiday leave and/or regular time pay ON a holiday, you must use Absence Type 7420, Unpaid Leave, ON the actual holiday
HR_TM_300 Time Management v7 48
Unit 2 ExerciseUnit 2 Exercise•Complete the following exercise:
2.3 – CATS Time Entry – Salaried Exception Time
HR_TM_300 Time Management v7 25
HR_TM_300 Time Management v7 49
Change to Prior Pay PeriodChange to Prior Pay Period•For both hourly and salaried employees, follow the same
steps for normal time entry, making sure you indicate the correct Data Entry Profile and Key Date on the Initial Screen – save your changes
•The time changes must also be approved and transferred• IRIS will automatically adjust any pay/quota-related
issues caused by the change•If the “Payroll Correction Final Run” has
already occurred, the adjustments will be on the next pay period’s pay stub/ remuneration statement
HR_TM_300 Time Management v7 50
Posting to Future Pay PeriodsPosting to Future Pay Periods•Posting future time is also possible, and the process is
the same for both hourly and salaried employees•Follow the same steps for normal time entry, making
sure you indicate the correct Data Entry Profile and Key Date on the Initial Screen - save your changes
•Future postings of Absence time DO affect leave quota immediately
For example, if you record a week’s vacation for an employee 3 months from now but in the meantime the employee is taking vacation and actually records more than the quota available, the system will not allow you to enter the time they’re taking now – You can enter only what is available in IRIS at the present time
HR_TM_300 Time Management v7 26
HR_TM_300 Time Management v7 51
Unit 2 SummaryUnit 2 SummaryAny questions related to:•Cross Application Time Sheet (CATS)•Data Entry Profiles•Attendance/Absence Types•Hourly employee Time Entry
IRIS Daily Time Record, Exception Time, Overtime, Shift Differential Rates
•Salaried employee Time Entry•Holiday Leave Time Entry•Prior pay period changes•Posting to future pay periods
HR_TM_300 Time Management v7 52
Unit 3Unit 3
CATS Time Entry with Cost Allocation
HR_TM_300 Time Management v7 27
HR_TM_300 Time Management v7 53
Cost AllocationCost Allocation•Routine cost distribution for a position/employee is
established in HR Infotype 0027 (Cost Distribution)•Time entry using a Cost Allocation Data Entry Profile
prompts the system to temporarily override Infotype 0027
•Only WAGES are impacted by using this profile – a Journal Voucher (FV50) would need to be processed to move the benefits costs of the associated wages to the correct cost object
•Use transaction PA30 - Infotype 0027 to override wages, taxes, benefits, etc…
Infotype 0027
Acct #1 = 50%
Acct #2 = 50%
Cost Allocation
Acct #3 = X # of hours (on Time Sheet)
Acct #1 = 50% of remaining (0027)
Acct #2 = 50% of remaining (0027)
HR_TM_300 Time Management v7 54
Cost AllocationCost Allocation•Currently available only with the UK Biweekly Time with
Cost Allocation Data Entry Profile in transaction CAT2•Provides additional columns to enter various types of
costs objects: Cost Center, WBS Element, Fund, etc…•An hourly employee can be used in either the UK Biweekly
Time or UK Biweekly Time with Cost Allocation Data Entry Profile – the only difference is the presence or absence of these columns
•Remainder of the CATS Time Entry process is the same•Can allocate both regular hours worked and overtime, but
not on the same assignment (PERNR) – Contact HR Compensation for overtime cost allocation
HR_TM_300 Time Management v7 28
HR_TM_300 Time Management v7 55
Regular Hours WorkedRegular Hours Worked Cost AllocationCost Allocation•Using the employee’s main assignment (PERNR), click on
the Target Hours icon or manually enter the employee’s regular Hours Worked (1005) to be charged to the position’s default cost distribution (established in Infotype 0027)
•On the next available row, enter the main assignment’s Pers.No., the desired cost object, A/A Type 1005, and the number of hours on the appropriate dates – then Save
Cost Object
Attendance Type 1005Personnel Number
Allocated Hours
HR_TM_300 Time Management v7 56
Unit 3 ExerciseUnit 3 Exercise•Complete the following exercise:
3.1 – CATS Time Entry with Cost Allocation - Hourly
HR_TM_300 Time Management v7 29
HR_TM_300 Time Management v7 57
Unit 3 SummaryUnit 3 SummaryAny questions related to:•Explanation of Cost Allocation•Entering Cost Allocation information in CATS
Regular Hours Worked AllocationsOvertime Allocations
HR_TM_300 Time Management v7 58
Unit 4Unit 4
Selection Variants
HR_TM_300 Time Management v7 30
HR_TM_300 Time Management v7 59
Selection VariantsSelection Variants• Creating and saving selection variants allows you to
easily retrieve various groupings of employees/students• Two methods:
By Personnel Numbers; By Enterprise Structure values, which will capture and retrieve the most current list of active employees/students
• You can have as many selection variants as needed in any transaction
• Selection variants created in one transaction code cannotbe copied to another transaction code – even if they contain the same search criteria – they must be created separately in each transaction code
HR_TM_300 Time Management v7 60
Creating by Personnel Numbers Creating by Personnel Numbers –– Option 1Option 1•Click on the Multiple Selection icon to the far-right of the
Personnel Number field•Enter individual Personnel Numbers on each line, using the
Possible Entries icon to search if necessary•Click on the Execute icon in the lower-left corner
Green light indicates multiple
selections are now active
HR_TM_300 Time Management v7 31
HR_TM_300 Time Management v7 61
Creating by Personnel Numbers Creating by Personnel Numbers –– Option 2Option 2•Click on the Multiple Selection pushbutton•Select the Organizational Assignment tab•Enter various selection criteria which will retrieve the
desired employees/Personnel Numbers•Press the Enter key
HR_TM_300 Time Management v7 62
Creating by Personnel Numbers Creating by Personnel Numbers –– Option 2Option 2•Click in the appropriate checkboxes to select your
employees•Press the Enter key
•The Personnel Numbers are copied back to the Multiple Selection for Personnel Number pop-up window
HR_TM_300 Time Management v7 32
HR_TM_300 Time Management v7 63
Creating by Personnel Numbers Creating by Personnel Numbers –– Option 3Option 3• You can copy and paste a list of Personnel Numbers from
an external application such as Excel:1. Select your data in the Excel spreadsheet and click on the
Copy icon2. Click on the Upload from clipboard icon in the IRIS
window1
2
Personnel Numbers are pasted here
HR_TM_300 Time Management v7 64
Creating by Enterprise Structure ValuesCreating by Enterprise Structure Values•Use any combination of the Enterprise Structure selection
fields listed below in creating your selection variant(s):
•You can also use the Multiple Selection icon , located to the right of each field, to indicate multiple values – A green light on the icon indicates multiple values exist
Department numberOrganizational Unit
Campus, STEPS, HospitalPersonnel Area
Regular FT, Regular PT, Temp PTPersonnel Subarea
Staff, Student, FacultyEmployee GroupExempt Monthly, Non-exempt 40, Non-exempt 37.5Employee Subgroup
Example ValuesSelection Field
HR_TM_300 Time Management v7 33
HR_TM_300 Time Management v7 65
Creating by Enterprise Structure ValuesCreating by Enterprise Structure Values•Example variants:
30000119-MO30000119-BWVariant Name
3000011930000119Organizational Unit
03(Exempt Monthly)
05(40 h/w)
Employee Subgroup
A(Staff)
A(Staff)
Employee Group
0001(Reg FT)
0001(Reg FT)
Personnel Subarea
1000(Main Campus)
1000(Main Campus)
Personnel Area
HR_TM_300 Time Management v7 66
Creating by Enterprise Structure ValuesCreating by Enterprise Structure Values• In CAT2 click on the Further selections pushbutton• Click on the gray boxes to the left of the desired
Selection options• Click on the top arrow icon to move the fields to the
Selection fields column
HR_TM_300 Time Management v7 34
HR_TM_300 Time Management v7 67
Creating by Enterprise Structure ValuesCreating by Enterprise Structure Values• Enter the appropriate
criteria in the Selection section fields – Remember you can use the Multiple Selection icons to the right of a field to indicate multiple values for a field
• Click on the Save icon to save the values entered
HR_TM_300 Time Management v7 68
Saving a VariantSaving a Variant• Enter a Variant name
(must be unique in IRIS and in this t-code) and Meaning, which is just a longer description for the variant
• Click on checkbox next to Protect variant to prevent others from making changes to your variant
• Click on the Save icon to save the variant
HR_TM_300 Time Management v7 35
HR_TM_300 Time Management v7 69
Unit 4 ExerciseUnit 4 Exercise•Complete the following exercise:
4.1 – Creating CAT2 Variants
HR_TM_300 Time Management v7 70
Using a CAT2 VariantUsing a CAT2 Variant1. Click on Get Variant icon
2. Enter Variant name and/or Created by (default value)
3. Click on the Execute icon
4. Double-click on the desired Variant name
1
4
2
3
If only ONE variant is saved in this transaction code, Step #4 is void – IRIS will automatically display the values on the initial screen!
HR_TM_300 Time Management v7 36
HR_TM_300 Time Management v7 71
Values will default from variant
Using a CAT2 VariantUsing a CAT2 Variant
5. Click on the Execute icon to generate the list of employees matching the listed values in the variant
5
HR_TM_300 Time Management v7 72
Inserting a Row with Multiple EmployeesInserting a Row with Multiple Employees•To give ALL employees (hourly/salaried) on your time
sheet an additional blank row simultaneously:click on the LT column header box to select that columnclick on the Target Hours icon – the system will copy the employee’s Personnel Number and Name
•Repeat this step for each additional row needed
HR_TM_300 Time Management v7 37
HR_TM_300 Time Management v7 73
Inserting a Row with Multiple EmployeesInserting a Row with Multiple Employees• Some other Insert Row
options:1. Place cursor on any row
for an employee2. From the Menu Bar
select Edit Edit Rows Insert Row
3. OR Right-click on row and choose Insert Rowfrom menu
4. OR click on the employee’s name, then click on the Insert Row icon in the Toolbar
1
2
New row is inserted and ready for edits
HR_TM_300 Time Management v7 74
Unit 4 Exercise(s)Unit 4 Exercise(s)•Complete the following exercise(s):
4.2 – Using CAT2 Variants
HR_TM_300 Time Management v7 38
HR_TM_300 Time Management v7 75
Deleting a VariantDeleting a Variant1. Enter the desired transaction code2. From the menu bar select Goto Variants Delete3. Double-click on the variant you wish to delete
3
HR_TM_300 Time Management v7 76
Deleting a VariantDeleting a Variant4. Select Only in current clients and click on the Continue
pushbutton
5. Click on the Yes pushbutton to delete
System message will appear in the status bar
HR_TM_300 Time Management v7 39
HR_TM_300 Time Management v7 77
Unit 4 SummaryUnit 4 SummaryAny questions related to:•Selection variants and their benefit in the time entry
process•Creating and using a selection variant for CAT2•Deleting a variant
HR_TM_300 Time Management v7 78
Unit 5Unit 5
Approval & Transfer of Time
HR_TM_300 Time Management v7 40
HR_TM_300 Time Management v7 79
Time ApprovalTime Approval•Time entered in CATS must be approved on-line by an
employee assigned to the security role Time Approver
• If any time changes are made (using CAT2) after the approval process, those changes must also be approved
•Employees/Students will not be paid for any time that has not been approved on-line
HR_TM_300 Time Management v7 80
Processing StatusProcessing Status•Time is automatically “stamped” with a Processing status
as different actions are performed in the system•For example, the most commonly used are:
20 – Time which has been entered and saved in CAT2 and is now ready to be approved30 – Time which has been approved with CATS_APPR_LITE50 – Time which was previously approved, but was altered due to changes in CAT2
HR_TM_300 Time Management v7 41
HR_TM_300 Time Management v7 81
Reporting PeriodReporting Period•There are several different options for the Reporting
Period field in the approval transaction:All, Other Period, Current/Other Payroll Period, etc…
•These options also work hand-in-hand with the Processing Status values
The All option is the most preferred and is not pay period-specific – For example:
If the Processing Status is 20 (Released for approval), only time that needs approval will display, whether it’s in the current pay period or not – this will also capture any retro changes that you may have made to prior pay period timeIf the Processing Status is a range from 20 to 60, ALL time for an employee will display, whether it needs approval, has been approved, has been changed since approval, etc…
HR_TM_300 Time Management v7 82
Time Approval for One EmployeeTime Approval for One Employee1. Enter t-code
CATS_APPR_LITE2. In the Reporting
Period fields choose All
3. Enter the employee’s Personnel Number
4. Ensure 20 is in the Processing Statusfields
5. Click on the Execute icon
2
5
3
4
HR_TM_300 Time Management v7 42
HR_TM_300 Time Management v7 83
6. Select all rows to be approved by clicking on first row to select then press the Ctrl + A keys on your keyboard
7. Click on the Approve icon in the Application Toolbar
Status Bar displays
Time Approval for One EmployeeTime Approval for One Employee
7
Notice Status icon change
HR_TM_300 Time Management v7 84
Creating a CATS_APPR_LITE VariantCreating a CATS_APPR_LITE Variant
• Click on the Selection Fields icon in the Application Toolbar –This is the same as clicking on the Further Selections pushbutton in CAT2
• The remainder of the steps are the same as listed in the Selection Variants unit
HR_TM_300 Time Management v7 43
HR_TM_300 Time Management v7 85
Using a CATS_APPR_LITE VariantUsing a CATS_APPR_LITE Variant
1. Click on the Get Variant icon in the Application Toolbar
2. Double-click on the desired variant in the pop-up window
3. Click on the Execute icon in the Application Toolbar
2
13
HR_TM_300 Time Management v7 86
Unit 5 ExerciseUnit 5 Exercise•Complete the following exercise:
5.1 – Creating/Using CATS_APPR_LITE Variants
HR_TM_300 Time Management v7 44
HR_TM_300 Time Management v7 87
Time TransferTime Transfer•After time data has been entered and approved in CATS, it
must then be transferred to IRIS-HR for Time Evaluation and payroll processing
•Absence time data is transferred into Infotype 2001•Attendance time data is transferred into Infotype 2002
HR_TM_300 Time Management v7 88
Time Transfer for One EmployeeTime Transfer for One Employee1. Enter transaction code ZCAT62. Enter the employee’s Personnel Number3. Click on the Execute icon
2
3
If processing a Repeat Transfer, click on this
pushbutton first, then enter the Personnel number and click on the Execute icon
HR_TM_300 Time Management v7 45
HR_TM_300 Time Management v7 89
Time Transfer for One EmployeeTime Transfer for One Employee• Be patient with this process - It may take a few
seconds/minutes to complete, depending on the amount of data needing transferred
• Ideal scenario is to have matching totals in the Number of data records readand Number of successful postingslines – If so, this process is complete – Exit the transaction
HR_TM_300 Time Management v7 90
•Any unsuccessful postings will need to be corrected in CAT2 – then also approved and transferred
•Bad cost allocation, collision with time already in Infotypes 2001/2002, or (as in the example above) conflicting time entries on the same date are just a few of the possible reasons for an unsuccessful transfer
On 03/20/2006 both 1005 and 7170 time were
entered - All other days with a “green light”did transfer!
Time Transfer for One EmployeeTime Transfer for One Employee
HR_TM_300 Time Management v7 46
HR_TM_300 Time Management v7 91
Creating a ZCAT6 VariantCreating a ZCAT6 Variant1. Click on the Multiple
Selection icon to the far-right of the Personnel numberfield
2. For a large number of employees, click on the Multiple selection pushbutton (demonstrated here)
2
1
Enter single Pernrs if small number of employees – Then click on the Execute icon in
the lower-left corner
HR_TM_300 Time Management v7 92
Creating a ZCAT6 VariantCreating a ZCAT6 Variant3. Select the
Organizational assignment tab
4. Enter the desired field values
To add multiple values to a field: Enter the first value, then click on the green “=“ icon Enter the other value(s) Click on the Copy icon
5. Click on the Start search icon
5
4
3
HR_TM_300 Time Management v7 47
HR_TM_300 Time Management v7 93
Creating a ZCAT6 VariantCreating a ZCAT6 Variant6. Click on the individual selection boxes next to the
desired employees – or the green Select All icon in the Application Toolbar
7. Click on the Copy icon in the Application Toolbar (or press the Enter key) – The Pernrs will copy to the Multiple Selection window
8. Click on the Execute icon, then the Save icon
6
8
HR_TM_300 Time Management v7 94
Using a ZCAT6 VariantUsing a ZCAT6 Variant1. Click on the Get Variant icon2. Double-click on the desired Variant name3. Click on the Execute icon
2
3 1
HR_TM_300 Time Management v7 48
HR_TM_300 Time Management v7 95
Unit 5 ExerciseUnit 5 Exercise•Complete the following exercise:
5.2 – Creating/Using ZCAT6 Variants
HR_TM_300 Time Management v7 96
Verifying Transferred Time Verifying Transferred Time -- ZVERXFERZVERXFER
Enter data in all three sections –Click on the Execute icon to generate the report
Can be saved as a variant!
HR_TM_300 Time Management v7 49
HR_TM_300 Time Management v7 97
Verifying Transferred TimeVerifying Transferred Time•Time not transferred will be listed first•Two reasons for a “No” transfer:
No corresponding record in IRIS for the Attendance or Absence code on the date in questionThere is a corresponding record, but the hours do not match
HR_TM_300 Time Management v7 98
Unit 5 ExerciseUnit 5 Exercise•Complete the following exercise:
5.3 – Verify Transferred Time
HR_TM_300 Time Management v7 50
HR_TM_300 Time Management v7 99
Unit 5 SummaryUnit 5 SummaryAny questions related to:•Time Approval
Processing StatusReporting PeriodTime approval for one employeeCreating and using an approval variant
•Time TransferTime transfer for one employeeCreating and using a transfer variantVerifying transferred time
HR_TM_300 Time Management v7 100
Unit 6Unit 6
Absence Quotas
HR_TM_300 Time Management v7 51
HR_TM_300 Time Management v7 101
Absence QuotasAbsence Quotas•The balance of hours an employee has available for
Vacation, Temporary Disability Leave, Holiday/Bonus Days, and Military Leave
•Absence quotas will be listed on the pay stubs, and will be as of the date of the final payroll run
Any changes to quota balances after the final payroll run will be reflected on the following pay period’s pay stub
•Employee Relations is responsible for making major adjustments to absence quotas (For example, converting TDL to Vacation quota)
•Normal usage/reduction of quotas occurs from the time being entered in CAT2 with the appropriate Absence Type
HR_TM_300 Time Management v7 102
Absence QuotasAbsence Quotas•Vacation and TDL quota accruals occur on the last day of
a pay period - available for usage the 1st day of the following pay period
•An employee must be in a paid status for at least 50% of a pay period in order to receive their Vacation and TDL quota accruals for that pay period
HR_TM_300 Time Management v7 52
HR_TM_300 Time Management v7 103
Vacation Leave QuotaVacation Leave Quota•IRIS will automatically adjust accrual amounts as annual
vacation allowances increase for an employee (based on years of service and employment status)
•Any unused vacation quota at the end of a fiscal year will be available for an additional 15 months (to September 30th of the next FY)
The system will make the quota unusable at the end of that time period – unless an extension is grantedIf an extension is granted, Employee Relations must be notified so they can make the necessary adjustments in IRIS
• IRIS will not accept entry of vacation leave if quota is not available
HR_TM_300 Time Management v7 104
Temporary Disability Leave (TDL) QuotaTemporary Disability Leave (TDL) Quota•There is no “use it or lose it” rule with TDL•Staff may convert TDL quota to vacation quota
Refer to Human Resources Policy and Procedure Number 87.0: Conversion of Temporary Disability Leave -http://www.uky.edu/HR/policies/hrpp087.htmlEmployee Relations will process the actual conversion in July based on the existing request form
•IRIS will not accept entry of TDL leave if quota is not available
HR_TM_300 Time Management v7 53
HR_TM_300 Time Management v7 105
Holiday Leave QuotaHoliday Leave Quota•Holiday quota will be generated automatically and made
available at least three weeks in advance of a holiday – six weeks in the case of the bonus days
•Once available, Holiday quota will be available in the system up to the end of the current fiscal year, however departments should still follow HR Policy and Procedure Number 83.0: Holiday Leave
It will be up to the department to monitor these balances using PT_QTA10
•IRIS will not accept entry of Holiday leave if quota is not available
HR_TM_300 Time Management v7 106
Military Leave QuotaMilitary Leave Quota•Military Leave for annual training purposes is monitored
via a quota manually created by Employee Relations when leave is approved
•IRIS will not accept entry of Military leave if quota is not available
HR_TM_300 Time Management v7 54
HR_TM_300 Time Management v7 107
Displaying Absence QuotasDisplaying Absence Quotas•Appropriate department users and business officers will
have access to display absence quotas for employees within their organizational unit(s)
•Transactions available: PT_QTA10 and PT50•The reports will provide:
Employee’s Personnel Number and NameType of quota - Vacation, TDL, Holiday, and Military LeaveEntitlement hours (cumulative balance), Requested hours (time taken) and Remaining hours (current balance)
•All balances are in Hours only•Contact the Employee Relations Office regarding any
absence quota concerns or errors
HR_TM_300 Time Management v7 108
Displaying Absence Quotas Displaying Absence Quotas –– PT_QTA10PT_QTA10
Enter multiple values for a
field by clicking on the Multiple Selection icon to the right of
the field
Allows you to add other fields to the Selection section (i.e.
Organizational Unit)
See next slide for more on these
Key dates
Can be saved as a Selection Variant!
HR_TM_300 Time Management v7 55
HR_TM_300 Time Management v7 109
Displaying Absence Quotas Displaying Absence Quotas –– PT_QTA10PT_QTA10
•Key date for deduction – displays all quota used to this date
•Key date for entitlement – displays all quota earned to this date
•Dates will default to current date when transaction is first accessed, but may be different if a Selection Variant is used, in which case you would want to check/change the dates accordingly
•Dates that are the same as the last day of the payroll cycle will take into account quota accrual and leave usage as of the end of the payroll cycle
HR_TM_300 Time Management v7 110
Displaying Absence Quotas Displaying Absence Quotas –– PT_QTA10PT_QTA10
Save as spreadsheet
Sort (2)
Filter
Click on line to select,
then click on Display icon for further
details
Current Layout icon – click to alter how report is displayed –Then Save in order to be able to Choose layout in the future
Download to spreadsheet
HR_TM_300 Time Management v7 56
HR_TM_300 Time Management v7 111
Unit 6 ExerciseUnit 6 Exercise•Complete the following exercise:
6.1 – Display Absence Quota Information
HR_TM_300 Time Management v7 112
Quota Overview Quota Overview –– PT50PT50
Click on the Allpushbutton to
select all periods
Enter the Person ID(or use the Possible
Entries icon to search) then press
the Enter key
HR_TM_300 Time Management v7 57
HR_TM_300 Time Management v7 113
Quota Overview Quota Overview –– PT50PT50• Click on the Display Absence Quotas tab to display all
absence quotas by type (Vacation-TDL-Holiday)• Ignore Absence Quota Types 04/Vacation (Legacy
Transfer) and 06/Holiday – They are no longer being used
HR_TM_300 Time Management v7 114
Quota Overview Quota Overview –– PT50PT50•Click on the Expand pushbutton in the lower-left corner to
see validity dates
•The Deduction to column lists the “expiration date”•Click on the Collapse pushbutton to hide the
additional information
HR_TM_300 Time Management v7 58
HR_TM_300 Time Management v7 115
Quota Overview Quota Overview –– PT50PT50• Click on the Accrual information tab to display all accruals
Balances loaded during conversion
just prior to the IRIS HR go-live
Accruals generated each
pay period
HR_TM_300 Time Management v7 116
ESS ESS –– Leave Balance StatementLeave Balance Statement•Statement is a snapshot of the current balances as of
today, no matter when you go into the statement•Days that have been taken in the current fiscal year are
displayed•Prior fiscal years are not displayed•No future absences are reflected•No future accruals are reflected
•From your IRIS Launch Pad screen:Click on Employee Self-Service; thenClick on Working Time
HR_TM_300 Time Management v7 59
HR_TM_300 Time Management v7 117
ESS ESS –– Leave Balance StatementLeave Balance Statement
Click on PDF for a printable version
Current balances as of 09/01/07
HR_TM_300 Time Management v7 118
Quota CompensationQuota Compensation•Upon separating/retiring from the University, eligible
staff may be paid for all or a portion of their accumulated Vacation, TDL and Holiday quotas
•An employee must be in a paid status for at least 50% of a pay period in order to receive their Vacation and TDL quota accruals for that pay period
•The next payroll run will pay for the number of hours specified in this transaction
HR_TM_300 Time Management v7 60
HR_TM_300 Time Management v7 119
Quota CompensationQuota Compensation• If balances are greater than what the employee is
entitled to or they are terminating at the beginning of a pay period, then the quota they will accrue at the end of the final pay period is not important
• If balances are not above the maximum leave the employee is entitled to, then the last accruals need to be included in the compensation
Accruals normally do not become available until the payroll cycle begins with the first trial run - However, in this situation…1. The HR termination action for the employee should be
processed first2. Then the Quota Compensation transaction should be
processed the following day or later so that Time Evaluation has time to recognize the termination and generate the accruals “early”, if all other eligibility rules have been met
HR_TM_300 Time Management v7 120
Quota Compensation TypesQuota Compensation Types•HOLN (Non-exempt)/HOLE (Exempt) – Holiday quota•TDLN (Non-exempt)/TDLE (Exempt) – 22 day lump sum
option – must be processed first before the Retirement Contribution Component (if applicable)
•TDRN (Non-exempt)/TDRE (Exempt)– Retirement Contribution Component – assuming the employee has sufficient hours and is otherwise eligible for this compensation
•VACL – (N/A after 12/31/06!)•VACN (Non-exempt)/VACE
(Exempt) – Vacation quota
HR_TM_300 Time Management v7 61
HR_TM_300 Time Management v7 121
Quota CompensationQuota Compensation• For an employee retiring from UK, you may have up to
two (2) transactions for TDL compensation:1. 22 day lump sum option (22 days X # hrs/day) – do first2. Retirement Contribution Component (10% of remaining
amount after 22 day payout) – In the No. to compensatefield, enter the total number of hours remaining – IRIS will automatically compensate the number of hours at the appropriate hourly rate (calculated for exempt employees, actual for non-exempt) X 10%
• The following steps listed for processing a Vacation payout also apply to TDL and Holiday leave payouts
• See the HR Policy and Procedures Manual for any other information regarding leave payouts
HR_TM_300 Time Management v7 122
Quota CompensationQuota Compensation1. Enter transaction code PA612. Enter the employee’s Person ID and press the Enter key3. On the Att./Abs./Quota Info. tab click on gray box just
left of the Time Quota Compensation (0416) infotype4. Click on the Create icon in the Application Toolbar
4
3
2
HR_TM_300 Time Management v7 62
HR_TM_300 Time Management v7 123
Quota CompensationQuota Compensation5. Double-click on the desired quota type (regular Vacation
in this example)6. Enter the Start date and then the number of HOURS
eligible in the No. to compensate field7. Click on
the Save icon
5
7
Available balance
Start date is equal to the last active date for
the employee
6
HR_TM_300 Time Management v7 124
Quota CompensationQuota Compensation•When processing a different payout type it will be
necessary to clear out the Sty field at the bottom of the PA61 screen and the top of the Overview screen – the code for the last payout type will remain in the field
HR_TM_300 Time Management v7 63
HR_TM_300 Time Management v7 125
Quota Compensation OverviewQuota Compensation Overview•Click on the Overview icon in the Application Toolbar
to review the payouts you have processed•If you need to make any adjustments to the information
entered, click on the gray box to the left of the row to select, and then click on the Change icon – Make changes, then Save
HR_TM_300 Time Management v7 126
Unit 6 ExerciseUnit 6 Exercise•Complete the following exercise:
6.2 – Time Quota Compensation
HR_TM_300 Time Management v7 64
HR_TM_300 Time Management v7 127
Unit 6 SummaryUnit 6 SummaryAny questions related to:•Absence Quotas Overview•Vacation Leave Quota•Temporary Disability Leave (TDL) Leave Quota•Holiday Leave Quota•Military Leave Quota•Displaying absence quotas•Quota overview•Quota Compensation
HR_TM_300 Time Management v7 128
Unit 7Unit 7
Displays & Reports
HR_TM_300 Time Management v7 65
HR_TM_300 Time Management v7 129
Displaying Time Entries Displaying Time Entries –– CATS_DACATS_DA•Used to display employee time data prior to transfer1. Choose appropriate
Reporting Period (All, Other Period, Current Payroll Period, etc…)
2. Enter the Personnel Number
3. Click on Execute icon
2
13
END RESULT
Use the Multiple Selection icon to select multiple
PERNRS
HR_TM_300 Time Management v7 130
Displaying Time Entries Displaying Time Entries –– CATS_DACATS_DA•Click on the Additional Functions icons (yellow arrows)
to display/hide sets of various function icons
HR_TM_300 Time Management v7 66
HR_TM_300 Time Management v7 131
Display of Time & Quota Leave StatementsDisplay of Time & Quota Leave Statements•Transaction code is Z_TIMERPT•Optional transaction used to create summary reports of
employee time or leave quota usage information•Run to check for accuracy, print for distribution to
employees or for departmental files•Can display information for one pay period or a wide
range of time•Top portion of both reports lists the employee’s name and
other Organizational Assignment information as well as their absence quotas
HR_TM_300 Time Management v7 132
Display of Time Statement Display of Time Statement –– Z_TIMERPTZ_TIMERPT1. Select the appropriate
Period2. Enter values in the
Selection sectionYou can also click on the Further selectionspushbutton to add other Selection Fields to this section
3. To see only time worked, click in the white checkbox next to Daily in the bottom section
4. Click on the Execute icon
1
2
3
4
HR_TM_300 Time Management v7 67
HR_TM_300 Time Management v7 133
Display of Time StatementDisplay of Time Statement
HR_TM_300 Time Management v7 134
Display of Quota Statement Display of Quota Statement –– Z_TIMERPTZ_TIMERPT1. Select the appropriate
Period2. Enter values in the
Selection sectionYou can also click on the Further selectionspushbutton to add other Selection Fields to this section
3. To see only absence data, click in the white checkbox next to Leave in the bottom section ANDenter “*” in the typesfields
4. Click on the Execute icon
1
2
3
4
HR_TM_300 Time Management v7 68
HR_TM_300 Time Management v7 135
Display of Quota StatementDisplay of Quota Statement
HR_TM_300 Time Management v7 136
Remuneration StatementRemuneration Statement•The Remuneration Statement (report) displays Total
Earnings, Taxes, Post Tax Deductions, Pre Tax Deductions and Employer Contributions
•The report is available after each of the three payroll runs and is identical to the pay stub, minus the absence quotas
•Departments often run this report to verify that the time entry and payroll processes were successful for their staff
•This statement can also be generated when an employee has a question about their pay check
HR_TM_300 Time Management v7 69
HR_TM_300 Time Management v7 137
Remuneration StatementRemuneration Statement1. Enter transaction code
PC00_M10_CEDT2. Enter desired Payroll
Period and Selection Criteria
3. In the Parameterssection:1. Form name = ZDZ12. Print retroactive runs –
leave blank to see only the current payroll run (remove the default “X”)
4. Click on the Execute icon
2
3
4
HR_TM_300 Time Management v7 138
Remuneration Statement ExampleRemuneration Statement Example
Name & home address display here
HR_TM_300 Time Management v7 70
HR_TM_300 Time Management v7 139
Check Pay Report Check Pay Report –– ZHR_CHECKPAYZHR_CHECKPAY•Quick reference report developed to identify employees
who did not get processed in the payroll runContinue to review the Remuneration Statement for details regarding employee pay!
•Specific for a single payroll period and payroll area
•Available after the first payroll run for a pay period
• If a new Infotype 0008, Basic Pay, was created during the pay period, the employee will be listed twice on the report
HR_TM_300 Time Management v7 140
Check Pay Report Check Pay Report –– ZHR_CHECKPAYZHR_CHECKPAY•Select Payroll Period•Employment Status = 3 (Active Employees)•Select Payroll area – B1 (Biweekly) or M1 (Monthly)•Enter Organizational unit•Click on the Execute icon
•TIP: Use the Multiple Selection icon to the far-right of any Selection Criteria field to indicate multiple values, if applicable
HR_TM_300 Time Management v7 71
HR_TM_300 Time Management v7 141
Check Pay Report Check Pay Report –– ZHR_CHECKPAYZHR_CHECKPAY
•Total Gross column is most important – If $0.00, the employee is not getting paid for the selected pay period –Reasons for $0.00 Total Gross:
It is an hourly employee and hours have not yet been enteredInfotype 0003, Payroll Status, may still be locked for new hiresA payroll error has occurred and requires master data correction
HR_TM_300 Time Management v7 142
Employees Cost Distribution Objects ReportEmployees Cost Distribution Objects Report• Provides a report on the cost distribution for employees
that will be processed in payroll – either from Infotype 0027 or 1018
1. Enter transaction code ZCOSOBJ
2. Enter the desired Period and Selection options, etc…
3. Click on the Execute icon to generate the report
HR_TM_300 Time Management v7 72
HR_TM_300 Time Management v7 143
Employees Cost Distribution Objects ReportEmployees Cost Distribution Objects Report
HR_TM_300 Time Management v7 144
Unit 7 SummaryUnit 7 SummaryAny questions related to:•Displaying time entries – CATS_DA•Display of Time & Quota Leave Statements•Remuneration Statement•Check Pay Report•Employees Cost Distribution Objects Report
HR_TM_300 Time Management v7 73
HR_TM_300 Time Management v7 145
Course SummaryCourse SummaryYou should now be able to:•Recognize and understand the terminology and key
foundational components in Time Management•Execute Time Entry•Create and use selection variants•Approve and transfer time•Understand and display absence quotas•Process quota pay-outs•Display time entries and any
time-related reports
HR_TM_300 Time Management v7 146
HR_TM_300 AssessmentHR_TM_300 Assessment• Use the following:
Assessment name on your Data SheetAssessment “IRIS Daily Time Record”
1. Enter the time2. Approve the time3. Transfer the time4. Notify the instructor when
the final transfer log is displayed on your screen!
• Please complete the IRIS “Course Evaluation” form before leaving. Thanks!