Hong Kong Design Institute
Design Discipline Fashion and Image Design Programme Board
Higher Diploma Programme
DE114306 Higher Diploma in Costume Design for Performance
Definitive Programme Document
Volume B: Programme Information & Module Syllabuses
Version 1.3 – May 2019
2
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B – Programme Information & Module Syllabuses i
TABLE OF CONTENTS Page
SECTION ONE – PROGRAMME INFORMATION
1. BACKGROUND 2 1.1 General Programme Information 2 1.2 Demand for the Programme 3 1.3 Planned Places for AY2019/20 4
2. PROGRAMME OBJECTIVES AND INTENDED LEARNING
OUTCOMES 5
2.1 Programme Objectives 5 2.2 Programme Intended Learning Outcomes 6
3. PROGRAMME STRUCTURE AND CONTENTS 9 3.1 Programme Structure 9 3.2 Alignment of PILOs to GLDs 15 3.3 QF Credit Assignment 16 3.4 Module Design 17 3.5 Environmental and China Elements 19 3.6 Industrial Attachment 22 3.7 Minimum QF Credit Requirements for Awards 22 3.8 External Recognition 23
4. ASSESSMENT 25 4.1 General Information 25 4.2 QA Mechanism 28
5. LEARNING AND TEACHING STRATEGIES 29 5.1 Learning and Teaching Methods 29 5.2 Integration of Classroom-based Learning and Self-study 29 5.3 Use of Learning and Teaching Technologies 29
6. ADMISSION AND SELECTION 30
6.1 Specific Entry Requirement 30 6.2 Module Exemption 33
7. RESOURCES 31 7.1 Academic and Supporting Staff Establishment 31 7.2 Teaching Serviced by Other Units 31 7.3 Learning Support Facilities 31
Copyright © The Hong Kong Design Institute 2019
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without permission in writing from the publisher.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B – Programme Information & Module Syllabuses ii
SECTION TWO – MODULE SYLLABUSES Module Code
Module Title Page
General Education Modules
LAN3003
職業中文傳意:普通話對話與匯報 Vocational Chinese Communication : Putonghua Conversation and Reports
33
LAN4002
職業中文傳意:普通話報告與推介文書 Vocational Chinese Communication : Putonghua Presentations and Promotional Text Writing
38
LAN4108 English and Communication: Persuasive Presentations 43
LAN4101 English and Communication: Promotional Materials 47
LAN4107 English and Communication: Reports 51
LAN3103 English and Communication: Workplace Correspondence
55
LAN3100 English and Communication: Workplace Interaction 59
SDD4006/
SDD4006M
Collaboration, Teamwork & Social Engagement 64
SDD4007 Enhancing Competencies in the 21st Century Workplace 69
SDD4005/
SDD4005M
MindShift: Achieving Personal Growth & Effectiveness 74
ITE3003 Information Technology Essentials – Design 79
Discipline Core Modules
DES4008 Aesthetics and Semiotics 87
DES3006 Creative and Design Thinking 91
DES4007 Cultural Studies 95
Programme Specific Modules
FID4225 Advanced Fashion Workshop: Draping and Modelling 100
FID4204 Advanced Millinery and Headgear Studio 104
FID4197 Character Costume Design 108
FID4200 Collaboration Project 112
FID3077 Costume Construction 115
FID3070 Costume Drawings 119
FID3073 Costume History and Evolution 122
FID4205 Costume Technology 125
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B – Programme Information & Module Syllabuses iii
Module
Code Module Title
Page
FID4202 Critical Practice for Costume Design 129
FID4037 Fashion Plus: Industry Processes 133
FID4193 Fundamental Costume Design 137
FID3075 Introduction to Stage Hair Design 142
FID4227 Introduction to Stage Make-up 145
FID3074 Materials for Stage Performance 148
FID4206 Millinery and Headgear Studio 152
FID4153 Portfolio Development 156
Expanded Studies Modules
FID4043 Expanded Studies: Advanced Costume Workshop 159
FID4196 Expanded Studies: Costume Design Project 163
FID4042 Expanded Studies: Costume Workshop 167
FID3072 Expanded Studies: Experiential Project for Costume 171
FID4201 Expanded Studies: Props and Accessories Studio 175
Graduation Project
FID4203 Graduation Costume Project 179
Industrial Attachment Module
DES4901M Industrial Attachment 184
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B – Programme Information & Module Syllabuses iv
LIST OF APPENDICES
Page
APPENDIX 1 - MODULE ASSESSMENT SCHEMES (AY2019/20)
191
APPENDIX 2 - COMPARISON OF REVISED PROGRAMME AGAINST EXISTING PROGRAMME
229
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B – Programme Information & Module Syllabuses v
APPENDIX 1 – MODULE ASSESSMENT SCHEMES (AY2019/20)
Module Code
Module Title Page
General Education Modules
LAN3003
職業中文傳意:普通話對話與匯報 1
Vocational Chinese Communication : Putonghua Conversation and Reports
192
LAN4002
職業中文傳意:普通話報告與推介文書
Vocational Chinese Communication : Putonghua Presentations and Promotional Text Writing
193
LAN4108 English and Communication: Persuasive Presentations 194
LAN4101 English and Communication: Promotional Materials 195
LAN4107 English and Communication: Reports 196
LAN3103 English and Communication: Workplace Correspondence 197
LAN3100 English and Communication: Workplace Interaction 198
SDD4006/ SDD4006M
Collaboration, Teamwork & Social Engagement 199
SDD4007 Enhancing Competencies in the 21st Century Workplace 200
SDD4005/ SDD4005M
MindShift: Achieving Personal Growth & Effectiveness 201
ITE3003 Information Technology Essentials – Design 202
Discipline Core Modules
DES4008 Aesthetics and Semiotics 203
DES3006 Creative and Design Thinking 204
DES4007 Cultural Studies 205
Programme Specific Modules
FID4225 Advanced Fashion Workshop: Draping and Modelling 206
FID4204 Advanced Millinery and Headgear Studio 207
FID4197 Character Costume Design 208
FID4200 Collaboration Project 209
FID3077 Costume Construction 210
FID3070 Costume Drawings 211
FID3073 Costume History and Evolution 212
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B – Programme Information & Module Syllabuses vi
Module Code
Module Title Page
FID4205 Costume Technology 213
FID4202 Critical Practice for Costume Design 214
FID4037 Fashion Plus: Industry Processes 215
FID4193 Fundamental Costume Design 216
FID3075 Introduction to Stage Hair Design 217
FID4227 Introduction to Stage Make-up 218
FID3074 Materials for Stage Performance 219
FID4206 Millinery and Headgear Studio 220
FID4153 Portfolio Development 221
Expanded Studies Modules
FID4043 Expanded Studies: Advanced Costumes Workshop 222
FID4196 Expanded Studies: Costume Design Project 223
FID4042 Expanded Studies: Costume Workshop 224
FID3072 Expanded Studies: Experiential Project for Costume 225
FID4201 Expanded studies: Props and Accessories Studio 226
Graduation Project
FID4203 Graduation Costume Project 227
Industrial Attachment Module
DES4901M Industrial Attachment 228
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B – Programme Information & Module Syllabuses vii
LIST OF TABLES Page
Table 1.1: General Programme Information 2 Table 1.2: Planned Places for AY2019/20 4 Table 2.1: Mapping of PILOs with Discipline’s Desired Graduate
Attributes 7
Table 2.2: Mapping of PILOs with Programme Objectives 8 Table 3.1: Programme Structure of HD in Costume Design for
Performance 9
Table 3.2: Mapping of PILOs to Generic Level Descriptors at QF Level 4 15 Table 3.3: Mapping of Modules with Programme Intended Learning
Outcomes 17
Table 3.4: Modules with the Environment Elements Embedded 19 Table 3.5: Modules with the Mainland Elements Embedded 20 Table 3.6: Minimum QF Credit Requirement for Exit Award
(Higher Diploma in Costume Design for Performance) and Intermediate Exit Award (Diploma in Design)
23
Table 3.7a: Professional Recognition for HD in Costume Design for Performance
23
Table 3.7b: Seeking for Professional Recognition 23 Table 4.1:
Summary of the Module Assessment Scheme for HD in Costume Design for Performance in 2019/20
25
Table 6.1: Preferred Subjects in HKDSE and ApL for DE Programmes 30
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B – Programme Information & Module Syllabuses 1
SECTION ONE – PROGRAMME INFORMATION
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 2
1. BACKGROUND AND RATIONALE 1.1 General Programme Information The HD in Costume Design for Performance is designed to meet the needs of students with relevant attainment at the Hong Kong Diploma of Secondary Education (HKDSE) or equivalent to continue their study at paraprofessional level. The general information of the programme is given in Table 1.1 below.
Table 1.1: General Programme Information Programme Code DE114306 Programme Title: (in English & Chinese)
Higher Diploma in Costume Design for Performance 演藝造型設計高級文憑
*Qualification Title: (in English & Chinese)
Higher Diploma in Costume Design for Performance 演藝造型設計高級文憑
Discipline: Design Area of Study and Training / Sub-area / Programme Area@ :
Arts, Design and Performing Arts / Design and Other Creative Industries / Design and Other Creative Industries
Offering Campus(es): HKDI
Programme Board: Fashion and Image Design
Mode of Study: Full-time
Duration: 5 semesters to be completed normally in 2 years
Minimum Notional Learning Hours:
3175 Hours
Total Contact Hours (Full-time Mode):
1261 Hours
Minimum QF Credit Requirements:
317 Credits + 10 IA Credits
Commencement Date: September 2019
Planned Places: 30
Intermediate Exit Award #: Diploma in Design 設計文憑
@ Refer to the New Classification of Programme Area with PAA Status under HKCAAVQ. # In order to attain the Intermediate Exit Award of Diploma in Design, students have to acquire minimum 120 credits meeting the specified requirements of the programme as shown in the Note of Table 3.1 Programme Structure. The Area of Study and Training / Sub-area / Programme Area of the Intermediate Exit Award are aligned with those of the Higher Diploma award.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 3
1.2 Demand for the Programme
Social Demand
The local and regional demand for costume designers with technical knowhow has grown with the expanding of theme parks and stage performances business in the region. Compare with year 2016, the continue work force demand from costume design, character design for film and TV as well as performance costumes for stage and theme parks are increased more than 20% in year 2017. With the prime costume production base shifting back to HK, there are significant demands for potential graduates to support the future development of the industries.
Potential employers in the film, TV and stage performance are looking forward to employ assistants with fundamental knowledge and skills in this profession.
Education Demand
Related Design Courses offered in Hong Kong
The following universities and tertiary education institutes of Hong Kong offer costume design courses:
• The Hong Kong Academy for Performing Arts
• NYU/TISCH
• Carnegie Mellon University
• Nottingham Trent University
Institution Course Duration
The Hong Kong Academy for Performing Arts
BFA in Costume Technology/Set and Costume Design
4 years
NYU/TISCH BA Costume Design 4 years
Carnegie Mellon University BA Costume Design 4 years
Nottingham Trent University BA Film, TV Theatre Costume Design
4 years
Uniqueness of the Costume Design Programme
Costume design plays a key part in the stage and entertainment performance, TV and film’s character creation. There is no similar programme with emphasis on costume designs, production techniques as well as head gear creations. However there a number of universities in HK and overseas that in offer Higher Diploma programmes in similar areas.
In this connection, the programme could provide a solid foundation for graduates to articulate further in their studies in costume design area.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 4
Industry and Market Demand
Compare with 2016, the Stage performance business including dramas, concerts, film and TV productions are growing in more than 60% in the year 2017; theme parks in HK are also expanding their types and scale of the performances in the parks. There is a continuous demand in the area of costume design, wardrobe management, costume making and production planning personnel as informed the art directors from dramas, film and TV and costume production companies managing directors.
New Theme Parks, such as Universal Studio in Beijing and Lisboeta in Macau, will soon be opened for the region in the coming years, hence staff with structured and well trained in costume design and techniques in making different types of costumes are expected to have high potential employability.
Costume Designer is a key role for success in the entertainment, film, and TV business where important international and regional awards, such as Oscar and BAFTA credit the artists working in costume design. The role of a costume designer is important as it enriches the character of each performer in a performance. It is foreseeable that people with qualified academic achievements will have good career development.
Market Supply
There is no education institution offering costume design for performance programme in Hong Kong at the moment
1.3 Planned Places for AY2019/20
Table 1.2: Planned Places for AY2019/20
Programme Offering Campus
Planned Places
HD in Costume for Performance HKDI 30
An adequate workforce supply with sufficient knowledge and technical know-how in costume design is crucial to the future development of the entertainment and performance industries.
With the growth in the performance business like film and TV, dramas, concerts and theme parks, the demand for graduates with strong creative and technical background would contribute in the development of the industries.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 5
2. PROGRAMME OBJECTIVES AND INTENDED LEARNING OUTCOMES
The Higher Diploma in Costume Design for Performance aims to fulfill the VTC mission of providing a valued choice to school leavers and working adults to acquire values, knowledge and skills for lifelong learning and enhanced employability as well as valued supports to industries for their manpower development.
The Higher Diploma in Costume Design for Performance will equip students with the professional and technical knowledge and skills together with the necessary language, IT, interpersonal and other generic skills, initially at a paraprofessional level, via the blending of theoretical knowledge and practical application, to enable them to pursue careers in costume design for performance, wardrobe coordinator and theme park stylist/costumer etc.
This programme prepares students for articulation to advanced education in costume technology / set and costume design; Film TV; theatre costume design; costume design manufactures, theme park wardrobe supervisor, etc. It also seeks to cultivate skills in lifelong learning and develop and self-learning.
2.1 Programme Objectives The programme objectives of HD in Costume Design for Performance are to:
(1) equip students with costume design foundation for a career in relation with creative industries;
(2) cultivate students' notion for lifelong learning and develop students to be independent learners;
(3) prepare students for further study and professional development in the costume design and related industries;
(4) provide students with the latest knowledge and skills in costume technology / set and design areas such as film and TV, theatre, theme park wardrobe and manufacturing;
(5) enable students to manage the process of research, design development, planning and production for costume design with specific requirements in different occasions; and
(6) develop students’ awareness in sustainability, aesthetics, cultural perspective and
professional ethics in costume design for performance.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 6
2.2 Programme Intended Learning Outcomes The Programme Intended Learning Outcomes (PILOs), i.e. the expected competencies students would achieve upon completion of study, are aligned with the programme objectives and the Discipline’s desired graduate attributes. The graduates of HD in Costume Design for Performance are expected to be able to:
(a) work effectively as an individual professional or in a team in familiar and some new contexts in the local, Mainland and global workplace, by utilizing visual and aesthetical, written and verbal communication skills, as well as IT, numerical and other soft skills;
(b) reflect on personal learning needs and devise a professional development plan for career growth and/or further study;
(c) apply creative thinking with environmental, ethical, cultural, sustainable, economical, technological considerations in dealing with image design needs;
(d) manage costume design projects by applying skills in conceptualization, visualization, realization and presentation in an integrated manner;
(e) identify the constrains of specific costume design issues to improve the project planning and production processes through research, analysis, and evaluation;
(f) create costume design solutions to meet criteria varying from experimental exploration, environmental friendly, production-focused and market-oriented aspects satisfying the specification of a given brief; and
(g) develop individual portfolio by applying knowledge and skills of costume design.
Tables 2.1 and 2.2 illustrate how the PILOs contribute to the fulfilment of the Discipline’s desired graduate attributes and programme objectives.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 7
Table 2.1: Mapping of PILOs with Discipline’s Desired Graduate Attributes
Programme Intended Learning Outcomes (PILOs)
Desired Graduate Attributes*
A1 A2 S3 S4 S5 S6 S7 K8 K9 K10 K11 K12
a
work effectively as an individual professional or in a team in familiar and some new contexts in the local, Mainland and global workplace, by utilizing visual and aesthetical, written and verbal communication skills, as well as IT, numerical and other soft skills
b reflect on personal learning needs and devise a professional development plan for career growth and/or further study
c
apply creative thinking with environmental, ethical, cultural, sustainable, economical, technological considerations in dealing with image design needs
d
manage costume design projects by applying skills in conceptualization, visualization, realization and presentation in an integrated manner
e
identify the constrains of specific costume design issues to improve the project planning and production processes through research, analysis, and evaluation
f
create costume design solutions to meet criteria varying from experimental exploration, environmental friendly, production-focused and market-oriented aspects satisfying the specification of a given brief
g develop individual portfolio by applying knowledge and skills of costume design
* Desired Graduate Attributes: Attitude A1 Effective Self-efficacy and Teamwork A2 Self-awareness and Life-long Learning Oriented Skills S3 Effective Communication S4 Precise Project Management S5 Creative Thinking S6 Critical Thinking S7 Good Aesthetics Sense Knowledge K8 Social Aspect Awareness K9 Solid Professional Knowledge K10 International Outlook K11 Interdisciplinary K12 Research Capability (Requires research)
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 8
Table 2.2: Mapping of PILOs with Programme Objectives3
Programme Intended Learning Outcomes (PILOs)
Programme Objectives
1 2 3 4 5 6
a
work effectively as an individual professional or in a team in familiar and some new contexts in the local, Mainland and global workplace, by utilizing visual and aesthetical, written and verbal communication skills, as well as IT, numerical and other soft skills
b reflect on personal learning needs and devise a professional development plan for career growth and/or further study
c
apply creative thinking with environmental, ethical, cultural, sustainable, economical, technological considerations in dealing with image design needs
d
manage costume design projects by applying skills in conceptualization, visualization, realization and presentation in an integrated manner
e
identify the constrains of specific costume design issues to improve the project planning and production processes through research, analysis, and evaluation
f
create costume design solutions to meet criteria varying from experimental exploration, environmental friendly, production-focused and market-oriented aspects satisfying the specification of a given brief
g develop individual portfolio by applying knowledge and skills of costume design
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 9
3. PROGRAMME STRUCTURE AND CONTENTS
The aims and objectives of HD in Costume Design for Performance are to be attained through a well-designed curriculum structure, appropriate learning and teaching strategies and assessment methods, comprehensive vocational training and a variety of extra-curricular activities. 3.1 Programme Structure A summary of the structure of the HD in Costume Design for Performance is shown in the following table while the detailed module syllabuses can be found in the Section Two of this document.
Table 3.1: Programme Structure of HD in Costume Design for Performance
(Full-time Mode) 4
Module
Code Module Title
QF
Level
Contact
Hours#
Self-
study
Hours#
Assess-
ment
Hours#
Total
NLHs#
QF
Credits~
Semester 1
LAN3100*1 English and Communication: Workplace Interaction
3 26 34 - 60 6
SDD4006 *1 Collaboration, Teamwork & Social Engagement
4 26 34 - 60 6
ITE3003*1 Information Technology Essentials – Design
3 26 39 - 65 6
DES3006*1 Creative and Design Thinking 3 39 61 - 100 10
FID3077 Costume Construction 3 52 48 - 100 10
FID3070 Costume Drawings 3 39 31 - 70 7
FID4193 Fundamental Costume Design
4 26 44 - 70 7
FID3072 Expanded Studies: Experiential Project for Costume
3 13 7 - 20 2
Sem 1 Total^: 247 298 - 545 54
Nominal Duration for Sem 1: 13 weeks
Estimated Study Load for Sem 1^: 41.9 NLHs per week
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 10
Module
Code Module Title
QF
Level
Contact
Hours#
Self-
study
Hours#
Assess-
ment
Hours#
Total
NLHs#
QF
Credits~
Semester 2
LAN3003*1 職業中文傳意︰普通話對
話與匯報
Vocational Chinese Communication : Putonghua Conversation and Reports
3 26 34 - 60 6
LAN3103*1 English and Communication: Workplace Correspondence
3 26 34 - 60 6
SDD4005M*1, *2 MindShift: Achieving Personal Growth & Effectiveness
4 13 17 - 30 3
DES4007 Cultural Studies 4 52 98 - 150 15
FID3073 Costume History and Evolution
3 39 61 - 100 10
FID4205 Costume Technology 4 52 68 - 120 12
FID3074 Materials for Stage Performance
3 26 34 - 60 6
FID4206 Millinery and Headgear Studio
4 26 34 - 60 6
FID4042 Expanded Studies: Costumes Workshop
4 26 34 - 60 6
Sem 2 Total^: 286 414 - 700 70
Nominal Duration for Sem 2: 13 weeks
Estimated Study Load for Sem 2^: 53.8 NLHs per week
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 11
Module
Code Module Title
QF
Level Contact
Hours#
Self-
study
Hours#
Assess
- ment
Hours#
Total
NLHs# QF
Credits~
Semester 3
LAN4108 English and Communication: Persuasive Presentations
4 26 64 - 90 9
SDD4005M*1, *2 MindShift: Achieving Personal Growth & Effectiveness
4 13 17 - 30 3
DES4008 Aesthetics and Semiotics 4 39 71 - 110 11
FID3075 Introduction to Stage Hair Design
3 39 31 - 70 7
FID4043 Expanded Studies: Advanced Costumes Workshop
4 26 34 - 60 6
FID4196 Expanded Studies: Costume Design Project
4 26 44 - 70 7
Varied*3 Enrichment Module 3 26 34 - 60 6
Sem 3 Total^: 195 295 - 490 49
Nominal Duration for Sem 3: 7 weeks
Estimated Study Load for Sem 3^: 70 NLHs per week
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 12
Module
Code Module Title
QF
Level Contact
Hours#
Self-
study
Hours#
Assess-
ment
Hours#
Total
NLHs# QF
Credits~
Semester 4
LAN4002 職業中文傳意︰普通話報告與
推介文書
Vocational Chinese Communication : Putonghua Presentations and Promotional Text Writing
4 26 64 - 90 9
LAN4107 English and Communication: Reports
4 26 64 - 90 9
FID4225 Advanced Fashion Workshop: Draping and Modelling
4 65 85 - 150 15
FID4204 Advanced Millinery and Headgear Studio
4 52 68 - 120 12
FID4197 Character Costume Design 4 26 44 - 70 7
FID4200 Collaboration Project 4 26 44 - 70 7
FID4227 Introduction to Stage Make-up 3 52 48 - 100 10
Sem 4 Total^: 273 417 - 690 69
Nominal Duration for Sem 4: 13 weeks
Estimated Study Load for Sem 4^: 53.1 NLHs per week
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 13
Module
Code Module Title
QF
Level Contact
Hours#
Self-
study
Hours#
Assess
- ment
Hours#
Total
NLHs# QF
Credits~
Semester 5
LAN4101 English and Communication: Promotional Materials
4 39 61 - 100 10
SDD4007 Enhancing Competencies in the 21st Century Workplace
4 13 17 - 30 3
FID4202 Critical Practice for Costume Design
4 26 44 - 70 7
FID4037 Fashion Plus: Industry Processes
4 52 68 - 120 12
FID4153 Portfolio Development 4 26 44 - 70 7
FID4201 Expanded Studies: Props and Accessories Studio
4 26 34 - 60 6
FID4203 Graduation Costume Project 4 78 222 - 300 30
Sem 5 Total^: 260 490 - 750 75
Nominal Duration for Sem 5: 13 weeks
Estimated Study Load for Sem 5^: 57.7 NLHs per week
Grand Total for 5 Semesters^: 1261 1914 - 3175 317
Industrial Attachment (IA)@
Module Code Module Title QF Level Total NLHs# QF
Credits~
DES4901M Industrial Attachment
4 90 attachment hours minimum + 13 hours for coaching, preparation, etc.
= 103
10
Students of this programme will be scheduled to take Industrial Attachment (IA) in Semesters 2 to 5, considering the readiness of the students, the skills requirement, availability of IA opportunities, and the overall study load of each semester.
Note (Full-time Mode):
* 1 In order to attain the Diploma in Design, students have to complete and acquire: a) totally 30 credits in five General Education Modules, including:
LAN3100 / English and Communication: Workplace Interaction (6 credits) SDD4005 / SDD4005M / MindShift: Achieving Personal Growth & Effectiveness (6 credits) or
SDD4006 / SDD4006M / Collaboration, Teamwork & Social Engagement (6 credits) ITE3003 / Information Technology Essentials – Design (6 credits) or
ITE3005 / Information Technology Essentials – Media (6 credits) or ITE3009 / Information Technology Essentials – Smart Living (6 credits)
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 14
LAN3003 / Vocational Chinese Communication: Putonghua Conversation and Reports 職業中文傳意:普通話對話與匯報(6 credits) LAN3103 / English and Communication: Workplace Correspondence (6 credits)
b) minimum 90 credits in Vocational Modules, including: DES3006 / Creative and Design Thinking (10 credits) DES4007 / Cultural Studies (15 credits) DES4008 / Aesthetics and Semiotics (11 credits) Plus any other vocational modules offered in the student’s enrolled programme/stream, accumulating to 54 Credits or above.
* 2 SDD4005M / MindShift Achieving Personal Growth & Effectiveness is a “year-long module” (a
“year-long module” in the VTC system may span across two or more semesters) to be delivered across two semesters from Semester 2 to Semester 3. The break down values of this module (Contact Hours, Self-study Hours, Assessment Hours, Total NLHs and QF Credits) shown in Semester 2 and 3 are for the proportionate calculation of Semester Total and Estimated Study Load only. The total QF Credits of the module is 6 which is presented as 3 in Semester 2 and 3 in Semester 3.
* 3 A variety of Enrichment Modules, offered by different disciplines of HKDI / IVEs, are open to all Higher Diploma students irrespective of the Discipline, programme or stream, upon meeting the pre-requisites / co-requisites / anti-requisites, if any. These Enrichment Modules may vary in QF Level, Self-study Hours, Assessment Hours, Total NLHs and QF Credits. Successful completion of one Enrichment Module is a graduation requirement.
# The Notional Learning Hours (NLHs) of a Module is the amount of time an average learner would take to complete all the learning and acquire the learning outcomes. The Notional Learning Hours is a summation of contact hours, self-study hours and assessment hours of a programme/module. Contact hours are the amount of time spent by a student in direct contact with the teaching staff of a programme. Self-study hours are the amount of time spent by a student without direct contact with teaching staff. Assessment hours refer to the amount of time spent by a student in scheduled examinations, tests and other related assessment activities outside contact and self-study hours. Some assessments may already be included in contact hours (e.g. quiz conducted in class) and self-study hours (e.g. students’ time spent on doing a project) and should not be double-counted.
~ The QF Credits of a module is proportional to the number of Notional Learning Hours that an average learner would take to acquire the learning outcomes stated in the module. One QF Credit is equivalent to 10 Notional Learning Hours in studying a module. In the table, the QF Credits are rounded down by module if they are in decimal. Adult learners are in general more mature and motivated than school leavers on pre-employment programmes, and in general possess a certain amount of work experience. Therefore for the same total amount of learning, the proportion of contact hours to self-study hours to achieve the same learning outcomes may be different for pre-employment students and in-service adult learners.
^ IA has not been included in the above calculations of total NLHs, total credits and estimated study load, as students may undertake IA in different semesters. Still the IA credits taken by students and IA study load in each semester are closely monitored according to prevailing regulations and guidelines.
@ For NHD, while 90 attachment hours are a minimum requirement, IA of individual programmes may include more attachment hours to meet industry requirements. For other types of programmes, the decision of the number of IA hours, if any, rests with the Programme Board.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 15
3.2 Alignment of PILOs to GLDs This programme is pitched at Qualifications Framework (QF) Level 4. The PILOs have been designed to align well with the Generic Level Descriptors (GLDs) at QF Level 4 across the four domains. The curriculum prepares students with a good foundation in the Design Discipline and specialized knowledge in selected areas. Through case studies and projects, students are developed with the ability to analyze broadly-define problem using a range of specialized skills and approaches, reach substantiated conclusions and devise appropriate strategies and actions. Effective communication skills and competent IT skills are required for presenting the work in written and verbal forms. Students are required to take autonomy and responsibility in managing the standard of their own work and, where appropriate, the output of others.
Table 3.2 below presents the alignment of the PILOs with the GLDs for QF Level 4.
Programme Intended Learning Outcomes
(PILOs)
Generic Level Descriptors (GLDs)
Kn
ow
led
ge
&
Inte
llect
ual
Ski
lls
Pro
cess
es
Au
ton
om
y &
A
cco
un
tab
ility
Co
mm
un
icat
ion
, IC
T
and
Nu
mer
acy
a
work effectively as an individual professional or in a team in familiar and some new contexts in the local, Mainland and global workplace, by utilizing visual and aesthetical, written and verbal communication skills, as well as IT, numerical and other soft skills
b reflect on personal learning needs and devise a professional development plan for career growth and/or further study
c
apply creative thinking with environmental, ethical, cultural, sustainable, economical, technological considerations in dealing with image design needs
d
manage costume design projects by applying skills in conceptualization, visualization, realization and presentation in an integrated manner
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 16
Programme Intended Learning Outcomes
(PILOs)
Generic Level Descriptors (GLDs)
Kn
ow
led
ge
&
Inte
llect
ual
Ski
lls
Pro
cess
es
Au
ton
om
y &
A
cco
un
tab
ility
Co
mm
un
icat
ion
, IC
T a
nd
Nu
mer
acy
e
identify the constrains of specific costume design issues to improve the project planning and production processes through research, analysis, and evaluation
f
create costume design solutions to meet criteria varying from experimental exploration, environmental friendly, production-focused and market-oriented aspects satisfying the specification of a given brief
g develop individual portfolio by applying knowledge and skills of costume design
h research and generate the fashion imagery ideas/interpretations to satisfy the design brief
3.3 QF Credit Assignment The programme team and its module teams of HD in Costume Design for Performance follow the QF Credit Assignment for VTC Award-bearing Programmes at QF Levels 1-4 (Volume A, Appendix 15) and the principles and approaches agreed by the Discipline to work out the QF Credits for the programme. In general, HD for school leavers and working adults follows the General Programme-level Conversion Factors for QF Credit and Contact Hours of 1 QF Credit being equivalent to 3.75 and 2 contact hours respectively. For example, compared to hands-on skill training modules such as Costume Technology, project and theory based modules normally require students to conduct more self-learning activities (e.g. research, concept development and testing) outside the class contact hours as in Expanded Studies: Experiential Project for Costume. A module of higher QF Level usually requires students to spend more hours on self-study activities than a module of lower QF Level. In consideration of the above, the conversion between the QF Credit and contact hours of modules in the Design Discipline’s full-time pre-employment programmes in general shows the following ratios: 1 QF Credit to about 4.3 contact hours for a QF Level 4 hands-on module and 5 contact hours for a QF Level 3 hands-on module; 1 QF Credit to about 3.3 contact hours for a QF Level 4 project/theory based module and 3.75 contact hours for a QF Level 3 project/theory based module; 1 QF Credit to about 2.6 contact hours for the module of Graduation Project which requires students to conduct a self-initiated final project integrating previously learned skills.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 17
While taking into account the guiding principles given, module teams also consider the QF Level, and the nature of the modules concerned when deciding the amount of Notional Learning Hours and the conversion factors for QF Credits and contact hours for individual modules.
3.4 Module Design The programme curriculum comprises General Education Modules (Languages, Whole Person Development and Generic IT) and Vocational Modules. For each module, the intended learning outcomes are clearly defined to guide the development of the module content and assessment scheme. Table 3.3 provides a mapping of the modules with the PILOs.
Table 3.3: Mapping of Modules with Programme Intended Learning 5Outcomes
Module Code
Module Title Programme Intended Learning Outcomes
a b c d e f g h
Language Modules
1 LAN3003 職業中文傳意:普通話對話與匯報
Vocational Chinese Communication: Putonghua Conversation and Reports
2 LAN4002 職業中文傳意:
普通話報告與推介文書
Vocational Chinese Communication:
Putonghua Presentations and Promotional Text Writing
3 LAN4108 English and Communication: Persuasive Presentations
4 LAN4101 English and Communication: Promotional Materials
5 LAN4107 English and Communication: Reports
6 LAN3103 English and Communication: Workplace Correspondence
7 LAN3100 English and Communication: Workplace Interaction
Whole Person Development Modules
8 SDD4006/
SDD4006M
Collaboration, Teamwork & Social Engagement
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 18
Module Code
Module Title
Programme Intended Learning Outcomes
a b c d e f g h
9 SDD4007 Enhancing Competencies in the 21st Century Workplace
10 SDD4005/
SDD4005M MindShift: Achieving Personal Growth & Effectiveness
Generic IT Module
11 ITE3003 Information Technology Essentials – Design
Discipline Core Modules
12 DES4008 Aesthetics and Semiotics
13 DES3006 Creative and Design Thinking
14 DES4007 Cultural Studies
Programme Specific Modules
15 FID4225 Advanced Fashion Workshop: Draping and Modelling
16 FID4204
Advanced Millinery and Headgear Studio
17 FID4197 Character Costume Design
18 FID3077 Costume Construction
19 FID4200 Collaboration Project
20 FID3070 Costume Drawings
21 FID3073 Costume History and Evolution
22 FID4205 Costume Technology
23 FID4202 Critical Practice for Costume Design
24 FID4037 Fashion Plus: Industry Processes
25 FID4193 Fundamental Costume Design
26 FID3075 Introduction to Stage Hair Design
27 FID4227 Introduction to Stage Make-up
28 FID3074 Materials for Stage Performance
29 FID4206 Millinery and Headgear Studio
30 FID4153 Portfolio Development
Expanded Studies Modules – Programme Specific
31 FID4043 Expanded Studies: Advanced Costumes Workshop
32 FID3072 Expended Studies: Experiential Project for Costume
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 19
3.5 Environmental and China Elements The programme has embedded the Environmental and China elements in individual modules. Details are shown in Table 3.4 and 3.5 respectively.
Table 3.4: Modules with the Environmental Elements Embedded
Module Code
Module Title MILOs with
Environmental Elements
GE Modules
LAN3003 職業中文傳意:普通話對話與匯報
Vocational Chinese Communication : Putonghua Conversation and Reports
口頭匯報 (節能燈泡)
LAN4101 English and Communication: Promotional Materials
Green Office and Environmental issues
SDD4006/
SDD4006M
Collaboration, Teamwork & Social Engagement
Sustainable Development
Module Code
Module Title
Programme Intended Learning Outcomes
a b c d e f g h
33 FID4196 Expanded Studies: Costume Design Project
34 FID4043 Expanded Studies: Costume Workshop
35 FID4201 Expanded studies: Props and Accessories Studio
Graduation Project
36 FID4203 Graduation Costume Project
Industrial Attachment Module
37 DES4901M Industrial Attachment
Enrichment Module
38 Varied Enrichment Module Varied according to student’s chosen module
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 20
Module Code
Module Title MILOs with
Environmental Elements
Discipline Core Modules
DES4007 Cultural Studies To describe the impact of cultural issues with respect to social, creative and sustainability contexts on arts and design.
Programme Specific Modules
FID4200 Collaboration Project Socio-cultural commentary: the relationship between humans and their environment
FID3073 Costume History and Evolution Identify a visual arts and culture research topic(s) in a contemporary context, including social and cultural perspectives
FID4193 Fundamental Costume Design Visual Art and Society: some contemporary artists’ works with environmental concern will be discussed
FID3072 Expanded Studies: Experiential Project for Costume
Projects in which the students develop solutions for their own identified opportunities from the community, e.g. exploration of new materials or enhancement of local living in a more sustainable manner.
FID4203 Graduation Costume Project Incorporating cultural, ethical and sustainable concerns in the development to develop innovative holistic solutions
Table 3.5: Modules with the Mainland Elements Embedded
Module Code
Module Title Topic Areas with
Mainland Elements
GE Modules
LAN3003 職業中文傳意:普通話對話與匯報
Vocational Chinese Communication : Putonghua Conversation and Reports
對話(中港貿易)、口頭報告、
簡化字
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 21
Module Code
Module Title Topic Areas with
Mainland Elements
LAN4002 職業中文傳意:
普通話報告與推介文書
Vocational Chinese Communication: Putonghua Presentations and Promotional Text Writing
內地流行語
SDD4007 Enhancing Competencies in the 21st Century Workplace
Economic and social Development
Discipline Core Modules
DES4007 Cultural Studies Oriental and Western Art and Design Movements – major movements and the contextual influences
Globalization vs localization – social norms and creative values within global cultures.
Programme Specific Modules
FID4197 Character Costume Design Introduction to Traditional Chinese Arts and Culture
Contemporary Chinese art
FID3073 Costume History and Evolution Knowledge of Chinese Arts
Contemporary Chinese art scene development
FID4193 Fundamental Costume Design The role of Hong Kong in Asian and Global Context
The relationship between China art market and the rise of the International art events
FID4203 Graduation Costume Project Identify and forecast relevant trends (local and non-local, including China) in visual arts and culture market, industry, technology and society
FID3072 Expanded Studies: Experiential Project for Costume
Identify the basic elements in the management of a design operation and evaluate the critical success factors of selected local and Mainland cases
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 22
3.6 Industrial Attachment
Industrial attachments (IA) are arrangements whereby students work in organizations for a certain period of time in order to obtain working experience in workplace environments and to apply trade-specific skills and generic skills learned to real work settings. IA should include at least 90 accumulated hours of workplace or equivalent training (equivalent to a minimum of 10 IA credits). For HD in Costume Design for Performance, through the feasibility study interview and the department’s past experience, many of the companies will be interested to establish joint projects with the department. Through this kind of collaboration, students can understand the latest requirement and trends in the industry. Furthermore, the department can also build up a closer linkage with industries, so that the programme can adjust the programme content according to the industrial needs.
In general, students are required to achieve satisfactory performance in all of the following components in order to pass this module:
complete the workshops on orientation;
complete the industrial attachment (minimum 90 hours) arranged by the department concerned;
perform satisfactorily during the attachment as reported by the industry mentors / tutors / industrial attachment coordinators;
write up log book / report to demonstrate progress of learning in the attachment period; and
consolidate learning at work through presentation and / or written report after the attachment period.
3.7 Minimum QF Credit Requirements for Awards Students have to complete 36 core modules (311 QF Credits), together with one enrichment module and 90-hour equivalent industrial attachment of 10 IA Credits to be qualified for the award of Higher Diploma. Under HD in Costume Design for Performance, there is an intermediate exit award at Diploma level, which is benchmarked at QF Level 3. Students opting for the intermediate exit award after meeting the stipulated requirements will be awarded a Diploma in Design. The minimum credit requirements for the Exit Award (Higher Diploma in Costume Design for Performance) and the Intermediate Exit Award (Diploma in Design) are shown in Table 3.6. 6
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 23
Table 3.6: Minimum Credit Requirements for Exit Award
(Higher Diploma in Costume Design for Performance) and Intermediate Exit Award (Diploma in Design)
Award
Minimum Credit Requirements
General Education Modules
Vocational Modules
Enrich- ment Module
IA Credits
Total
Higher Diploma in Costume Design for Performance
76 235 6 10 327
Diploma in Design 30 90 N/A N/A 120
3.8 External Recognition
The HD programme is recognized by related professional bodies in Table 3.7a and the programme team will seek recognition from the following professional bodies in Table 3.7b.
Table 3.7a: Professional Recognition for HD in Costume Design for Performance
Professional Body Recognition Asia Hair Master Association (AHMA) Students are eligible to apply for the
student membership of the Association
Table 3.7b: Seeking for Professional Recognition
Professional Body (Seeking for ) Recognition Hong Kong Association of Theatre Technicians & Scenographers
Students are eligible to apply for the student membership of the Association
Progression
The HKDI has been actively seeking partnerships with reputable local and overseas universities for providing articulated pathways for its HD graduates.
The progression paths for the graduates of this programme are as follows:
a) Within VTC
Articulation to bachelor degree is provided for students who intend to advance their careers by acquiring a higher qualification. Graduates of this programme can apply the following institutes:
- Graduates are eligible to apply for entry to year 3 of the BA (Hons) Fashion Design programme offered by the Technological and Higher Education Institute of Hong Kong
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 24
(THEi). - One year top-up bachelor degree offered by VTC collaborate with University of Creative
Arts, UK BA (Hons) Fashion Promotion and Imaging.
b) Outside VTC
Graduates may apply for admission to top-up bachelor degree programmes of Costume Design and related disciplines in any institutes in Hong Kong or overseas which recognize this programme.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 25
4. ASSESSMENT 4.1 General Information The programme is governed by the General Academic Regulations (GAR) for HD programmes. A Module Assessment Scheme (MAS), which consists of Continuous Assessment (CA) and End-of-Module Assessment (EA), for each module is prepared with reference to the nature of the module and the intended learning outcomes. The MAS is compiled at the beginning of each academic year. The assessment components may need to be modified, where appropriate and necessary during the academic year, to suit the specific requirements of individual disciplines and teaching units.
Table 4.1 is a summary of the MAS for the programme in 2019/20. The MAS of each module for 2016/17 is attached in the Appendix.
Table 4.1: Summary of the Module Assessment Scheme for HD in Costume for Performance in 2019/20
Sem
Module Code
Module Title
CA Components
EA Assign- ment /
Exercise
Lab /
Work-
shop
Project Others
(Note)
1
LAN3100 English and Communication: Workplace Interaction
2 (40%)
/ / / 1 (60%)
SDD4006 Collaboration, Teamwork & Social Engagement
1 (50%)
/ / / 1 (50%)
ITE3003 Information Technology Essentials – Design
/ 3 (50%)
/ / 1 (50%)
DES3006 Creative and Design Thinking
4 (50%)
/ / / 1 (50%)
FID3077 Costume Construction 2 (50%)
/ / / 1 (50%)
FID3070 Costume Drawings 1 (50%)
/ / / 1 (50%)
FID4193 Fundamental Costume Design
2 (50%)
/ / / 1 (50%)
FID3072 Expanded Studies: Experiential Project for Costume
/ 1 (50%)
/ / 1 (50%)
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 26
Sem
Module Code
Module Title
CA Components
EA Assign- ment /
Exercise
Lab /
Work-
shop
Project Others
(Note)
2
LAN3003 職業中文傳意:普通話 對話與匯報 Vocational Chinese Communication: Putonghua Conversation and Reports
2 (50%)
/ / / 1 (50%)
LAN3103 English and Communication: Workplace Correspondence
2 (40%)
/ / / 1 (60%)
SDD4005M* MindShift: Achieving Personal Growth & Effectiveness
1 (50%)
/ / / /
DES4007 Cultural Studies 2 (40%)
/ / / 1 (60%)
FID3073 Costume History and Evolution
1 (50%)
/ / / 1 (50%)
FID4205 Costume Technology 1 (50%)
/ / / 1 (50%)
FID3074 Materials for Stage Performance
/ 1 (60%)
/ / 1 (40%)
FID4206 Millinery and Headgear Studio
/ 1 (60%)
/ / 1 (40%)
FID4042 Expanded Studies: Costumes Workshop
2 (60%)
/ / / 1 (40%)
3
LAN4108 English and Communication: Persuasive Presentations
2 (40%)
/ / / 1 (60%)
SDD4005M* MindShift: Achieving Personal Growth & Effectiveness
/ / / / 1 (50%)
DES4008 Aesthetics and Semiotics 2 (40%)
/ / / 1 (60%)
FID3075 Introduction to Stage Hair Design
/ 1 (20%)
1 (30%)
/ 1 (50%)
FID4043 Expanded Studies: Advanced Costumes Workshop
1 (50%)
/ / / 1 (50%)
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 27
Sem
Module Code
Module Title
CA Components
EA Assign- ment /
Exercise
Lab /
Work-
shop
Project Others
(Note)
FID4196 Expanded Studies:
Costume Design Project 2
(50%) / / / 1
(50%)
4
LAN4002 職業中文傳意:普通話報告與推介文書 Vocational Chinese Communication: Putonghua Presentations and Promotional Text Writing
2 (50%)
/ / / 1 (50%)
LAN4107 English and Communication: Reports
2 (40%)
/ / / 1 (60%)
FID4225 Advanced Fashion Workshop: Draping and Modelling
2 (50%)
/ / / 1 (50%)
FID4204 Advanced Millinery and Headgear Studio
/ 1 (60%)
/ / 1 (40%)
FID4197 Character Costume Design
2 (50%)
/ / / 1 (50%)
FID4200 Collaboration Project / / 1 (50%)
/ 1 (50%)
FID4227 Introduction to Stage Make-up
/ 1 (20%)
1 (30%)
/ 1 (50%)
5
LAN4101 English and Communication: Promotional Materials
2 (40%)
/ / / 1 (60%)
SDD4007
Enhancing Competencies in the 21st Century Workplace
/ / / 1 (50%)
1 (50%)
FID4202 Critical Practice for Costume Design
1 (50%)
/ / / 1 (50%)
FID4153 Portfolio Development 2 (50%)
/ / / 1 (50%)
FID4037 Fashion Plus: Industry Processes
1 (60%)
/ / / 1 (40%)
FID4201 Expanded Studies: Props and Accessories Studio
2 (50%)
/ / / 1 (50%)
FID4203 Graduation Costume Project
/ / 2 (50%)
/ 1 (50%)
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 28
* SDD4005M / MindShift Achieving Personal Growth & Effectiveness is a “year-long module” (a “year-long module” in the VTC system may span across two or more semesters) to be delivered across two semesters from Semester 2 to Semester 3.
Note: “Others” include In-class Activities, Quizzes, Tutorial Exercises, Logbook, Report, Mock Interview, Career Portfolio, etc.
4.2 QA Mechanism There is a rigorous QA mechanism in the Design Discipline to ensure the validity, reliability and practicality of the assessments for the programme including assignments/projects, briefings, tutorials, class critiques during the module delivery; while final presentation and/or module conclusion will be conducted at the end. After all, there are moderations of assessments at module level.
According to assessment procedures the students’ assignments will be moderated among different tutors of different classes. A module leader will be responsible for the moderation procedure. If there is only one class, other tutors will be invited for the moderation practice.
The assignments and final marks will then be shown to the external examiner for comments and advice.
Sem Module Code Module Title CA Components
EA
Varied DES4901M Industrial Attachment Performance Evaluation by Industry Mentor
1 (50%)
IA Report and Presentation
1 (50%)
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 29
5. ADMISSION AND SELECTION
5.1 Learning and Teaching Methods
Depending on the nature of the module, a mixture of learning and teaching approaches and strategies will be adopted in this programme to meet the learning needs of students. They include lectures, tutorials, assignments, external professional participation, seminars, workshops practices, team work and use of IT in learning. Lectures are conducted to elaborate the main concepts of the topics covered in the module, with a view to providing a meaningful framework of the theoretical background of issues relating to the subject matter and guiding the understanding of core concepts and knowledge for further application. Apart from explanation by the module lecturers, various types of learning activities, such as seminars, tests and oral presentation are integrated into the lectures to promote active learning. Tutorials are used to facilitate learning in a student-centred approach through various activities. It aims to consolidate learning from lectures and provide further guidance. Tutorial activities may include group discussion, role plays and class assignment. The activities are arranged to allow students to develop analytical thinking and acquire specialised skills through interactive learning activities. External professional participation, where appropriate, will help students be aware of different company cultures and practices, and position the acquired knowledge in a real life context. Team work and role play simulate the multidisciplinary professional work environment.
5.2 Integration of Classroom-based Learning and Self-study Appropriate pedagogies are used to enhance better integration of classroom-based learning activities and self-study activities. This is well demonstrated in module Character Costume Design. The module is conducted through a combination of lectures, tutorials, studio practices, critiques, and peer discussion to equip students with basic knowledge and skills required in the costume design process. Students are encourage to integrate with other modules, such as drawing style and technique of costume creation in order that students may apply learned practices, knowledge and concepts across modules. 5.3 Use of Learning and Teaching Technologies Use of technologies to assist learning and teaching is encouraged and is an important component in the delivery of HD in Costume Design for Performance. This is well demonstrated in module Advanced Fashion Workshop: Draping and Modelling. Learning and teaching will be delivered interactively, in the form of workshops, lectures and tutorials. Studio practice will form the major component of the subject, with supplementary fashion technology workshop practice. Students are required to present their concept in a garment costume. Reference will be made to current costume direction and practice.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 30
6. ADMISSION AND SELECTION
6.1 Specific Entry Requirement In addition to the basic entry requirements of 5 HKDSE subjects at Level 2 or above, including English and Chinese Languages or equivalent, that apply to all programmes of the Design (DE) Discipline, applicants may be required to attend an interview.
6.2 Module Exemption
Exemption is given to students for the following modules upon meeting the specified exemption criteria concerned. Regarding application for exemption of other modules in the programme, students should follow the guidelines in the General Academic Regulations (GARs) for New Higher Diploma Programmes.
Table 6.1 Module Exemption
Module Exemption Criteria
English & Communication: Workplace Correspondence
Students with Grade E or above in the Subject Grade AND the Component Grade of Practical Skills for Work and Study HKALE Use of English will be exempted from this module.
MindShift: Achieving Personal Growth & Effectiveness Students possessing two-year full-time work
experience acquired after meeting the entry requirements of the Higher Diploma Programme can apply for module exemption of the Whole Person Development (WPD) modules, subject to passing the related assessment.
Collaboration, Teamwork & Social Engagement
Enhancing Competencies in the 21st Century Workplace
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 31
7. RESOURCES 7.1 Academic and Supporting Staff Establishment
The HD in Costume Design for Performance programme is managed and operated by full-time academic and supporting staff. Please refer to Section 8 of Volume A (Staffing and Staff Development) for details.
7.2 Teaching Serviced by Other Units
The language modules, IT modules and Whole Person Development modules will be serviced by the Language Centre, the relevant department under IT Discipline and the Student Development Office (SDO) of the campus respectively.
7.3 Learning Support Facilities
To enhance students’ learning experience, the following laboratories / special rooms / centres / facilities are set up to provide practical training to students of the programme in a simulated work environment:
(a) Fabric Workshop (b) Textile Design Workshop (c) Quality Assurance Laboratory (d) Pattern Workshop (e) Fashion Technology Workshop (f) Fashion Project Studio (g) Visual Merchandising Studio (h) CAD Studio (i) Photography Studio (j) Image Creation Studio (k) Fashion Gallery (l) Fashion Archive (m) Centre of Innovative Material and Technology (CIMT)
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 32
SECTION TWO – MODULE SYLLABUSES
for
Higher Diploma in Costume Design for Performance Note:
* The contact hours indicated in the syllabuses are for students following a full-time study mode. The conversion
between QF Credit and Contact Hours may vary among modules depending on their QF level and nature.
* 以下所示授課時數適用於全日制上課模式。資歷學分與授課小時的換算可因應不同單元的資歷級別及性質而調
整。
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 33
課程大綱
科目名稱 職業中文傳意:普通話對話與匯報 Vocational Chinese Communication : Putonghua Conversation and Reports
科目編號 LAN3003
資歷學分 6
資歷架構級別 第三級
學時 60 小時
授課時數*: 26 小時
講課: - 小時
導修: 18 小時
語言實驗室: 8 小時
訪問/講座 - 小時
自修時數: 34 小時
評估時數: - 小時 (授課及自修時間以外)
單元目標: 1. 培養學生的普通話表達與溝通能力,使他們能在熟悉的情況下,一般工作與社交領域內,
就多種不同的話題進行對話與匯報,以配合將來的工作需要。
2. 培養學生的自學能力,使他們掌握終身學習的方法。
單元學習成果:
完成本單元,學生能在一般的工作情景中: 1. 就多種不同的話題,熟練地以普通話進行對話。
2. 就多種不同的話題,熟練地以普通話進行匯報。
3. 以陳述、比較、建議等語言功能,成段落的話語,完成預設的溝通目標。
4. 針對情景與說話對象,適當運用與調整說話策略。
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 34
教學策略:
本單元以能力為本,採用真實材料,並模擬真實情景,以增強教學效果。
設置延伸學習,採用多元學習模式,讓學生在課堂以外,透過各式各樣的活動學習普通話,例如:網上學習、參與語文及文化活動等。
鼓勵學生養成應用資訊科技自學的習慣。
強調跨學科語言學習,為學生營造真實的語言學習環境。
評估方式:
持續評核(CA) 50%
單元總評核 (EA) 50%
總計 100%
評核指引:
1. 評核方式多樣化,包括說話評核、習作和網上練習等。
2. 評核能力時以能否達到溝通目的為最高準則,而非單純以學生在語音、詞匯或語法上所犯錯誤的多寡來評定。
3. 評核遵循效度、信度與可操作性等基本考核原則。
4. 評核以表現標準為依據,並收集足夠證據以反映被評者的能力。
5. 評核內容與形式應盡量接近真實生活情景或工作要求。
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 35
課程內容: 本課程參考香港資歷架構通用(基礎)能力,中文能力單元標準說明而設計:
能力單元 能力元素 表現標準
GCCH305A(P)能就多種不同的話題進行對話(普)
1. 能就多種不同的話題進行對話
應用範圍: 情景:可設定在一般
的工作場所或社交場
合 話題:多種不同的對
話話題包括但不限於
下列例子,如:談論
大 眾 話 題 、 向 同 事 (下屬或上司 ) 介紹
工作計劃、職責、目
標、工作程序等 對話形式:面對面或
電話對話 其他學習內容:包括
各種形式的聆聽練習
與語言知識
1.1 溝通目標 必須達到預設的溝通目標
1.2 語言功能 必須完成預設的語言功能,例如
陳述、比較、推介等。
1.3 語言特徵 1.3.1 語篇類型
能夠進行以段落為單位的對話
1.3.2 語音面貌 錯誤或缺陷較少,不影響溝通 發音、吐字基本清晰,語氣、語調、
語速適當
1.3.3 組織結構
話語結構完整,前後連貫 1.3.4 詞匯與語法
準確地運用不同的詞匯及句子結構
1.4 說話策略 認真聆聽 用適當的語氣和得體的措辭來表
達不同意見。 針對情景與說話對象,適當運用
與調整說話策略,例如通過停頓、
讚美、肯定與提問等,來增強表達
效果。 得體地運用身體語言,例如點頭、
眼神接觸等。
應用範圍:
每段對話不少於三分鐘
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 36
能力單元 能力元素 表現標準
GCCH307A(P)
能就多種 不同的話題進 行報告(普)
1. 能準備口頭報告:發言大綱、多媒體簡報與答問準備
2. 面對一人或多人進行報告
應用範圍: 情景:可設定在一
般的工作場所 話題:多種不同的
報告話題,如:產品
或服務推介報告、
個人或公司工作總
結報告等 其他學習內容:包
括各種形式的聆聽
練習與語言知識
1.1 確定報告目的
1.2 確定聽眾
1.3 蒐集資料
1.4 準備講稿
1.5 擬定口頭報告提綱
1.6 準備輔助材料,例如多媒體簡報、透明膠片、模型、圖片、表格等。
1.7 預計聽者的提問
2.1 溝通目標
必須達到預設的溝通目標
2.2 語言功能
必須完成預設的語言功能,例如陳述、比較、推介、建議等
2.3 語言特徵
2.3.1 語篇類型
能夠進行以段落為單位的報告
2.3.2 語音面貌
錯誤或缺陷較少,不影響溝通
發音吐字基本清晰,語氣、語調、語速適當。
2.3.3 組織結構
話語結構完整,包括介紹、主體、結論三部份,且前後連貫。
2.3.4 詞匯與語法
準確地運用不同的詞匯及句子結構
2.4 說話策略
根據情景,適當運用與調整說話策略,例如通過停頓、讚美、肯定與提問等,來增強表達效果。
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 37
能力單元 能力元素 表現標準
用適當的語氣和得體的措辭來表達不同意見。
善用多媒體簡報
控制緊張的情緒,例如做深呼吸、停頓或減慢語速。
控制聲音,包括音量、音高、發音、吐字等方面。
得體地運用身體語言,例如點頭、微笑、眼神接觸、手勢等。
認真聆聽聽者的提問,並作出回答。
應用範圍: 每次報告不少於三分鐘
教材: 由語文學科中文項目發展小組開發 參考書目:
1. 中國社會科學院語言研究所詞典編輯室編(2012)。《現代漢語詞典》(第 6 版)。北京:商務印書館。
2. 三聯書店編(2012)。《簡化字總表檢字(增訂版)》。香港:三聯書店(香港)有限公司。
3. 邵敬敏編(2012)。《現代漢語通論精編》。上海:上海教育出版社。
Creation/Revision Record:
Version Date Created/Revised by
1 Jan 2011 Qiu Xiaoyan, Lo Hau Yee
2 Jan 2012 Lo Hau Yee
3 Mar 2014 Lo Hau Yee
4 May 2015 Lo Hau Yee
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 38
課程大綱
科目名稱 職業中文傳意:普通話報告與推介文書 Vocational Chinese Communication : Putonghua Presentations and Promotional Text Writing
科目編號 LAN4002
資歷學分 9
資歷架構級別 第四級
學時 90 小時
授課時數*: 26 小時
講課: - 小時
導修 22 小時
語言實驗室 4 小時
訪問/講座 - 小時
自修時數: 64 小時
評估時數: - 小時 (授課及自修時間以外)
單元目標:
1. 培養學生的普通話表達及中文寫作能力,使他們在比較新的情況下,各種專業領域
內,進行專題報告及寫作專業推介文書,以配合將來的工作需要。
2. 培養學生的自學能力,使他們掌握終身學習的方法。
單元學習成果: 完成本單元,學生能在不同專業的工作中:
1. 以成段落的話語作分析、論證、辯護,並恰當運用報告技巧,熟練地以普通話進行
報告。
2. 整理、分析資料,並針對問題,運用恰當的言辭作出合理的解釋,提出具體的建議,
或推介可行的方案。
3. 針對與寫作對象,靈活運用與調整寫作策略,達到宣傳活動或產品的目的。
4. 撰寫主旨明確、剪裁恰當、文理連貫的宣傳推介文書。
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 39
教學策略:
本單元以能力為本,採用真實材料,並模擬真實,以增強教學效果。
設置延伸學習,採用多元學習模式,讓學生在課堂以外,透過各式各樣的活動學習
普通話,例如:網上學習、參與語文及文化活動等。
鼓勵學生養成應用資訊科技自學的習慣。
強調跨學科語言學習,為學生營造真實的語言學習環境。
評估方式:
持續評核(CA) 50%
單元總評核 (EA) 50%
總計 100%
評核指引:
1. 評核方式多樣化,包括說話評核、筆試、習作、網上練習等。
2. 評核能力時以能否達到溝通目的為最高準則,而非單純以學生在語音、詞匯、錯別字或語法上所犯錯誤的多寡來評定。
3. 評核遵循效度、信度與可操作性等基本考核原則。
4. 評核以表現標準為依據,並收集足夠證據以反映被評者的能力。
5. 評核內容與形式應盡量接近真實生活或工作要求。
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 40
課程內容︰ 本課程參考香港資歷架構通用(基礎)能力,中文能力單元標準說明而設計:
能力單元 能力元素 表現標準
GCCH407A(P) 能進行各 種專題報告(普)
1. 能準備各種專題報告 2. 能進行各種專題報告 應用範圍: 情景:可設定在特定
的工作場所 話題:各種專題報告
的話題如:業務報告、專題調查報告、產品推介報告等
報告形式:面對一人或多人進行報告
其他學習內容:包括各種形式的聆聽練習與語文知識
1.1 確定報告目的 1.2 確定聽眾 1.3 蒐集資料 1.4 準備講稿 1.5 擬定口頭報告提綱 1.6 準備可視輔助物,例如多媒體演示、
透明膠片、模型、圖片、表格等 1.7 預計聽者的提問,並作出適當的準備 2.1 溝通目標
必須達到預設的溝通目標
2.2 語言功能 必須完成預設的語言功能,例如
分析、論證,以及辯護等。
2.3 語言特徵
語篇類型 能夠穩定地維持以段落為單位的
報告 語音面貌 錯誤或缺陷偶有出現,完全不影
響溝通。 發音吐字清晰,語氣、語調、語速
自然。 組織結構 話語結構完整,層次分明,前後連
貫 介紹主題 主體闡述、論證要點 結論加強中心論題 詞匯與語法 準確地運用不同的詞匯及複雜的
句子結構。
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 41
能力單元 能力元素 表現標準
2.4 報告策略 根據情景,適當使用與調整說話
策略,例如通過停頓、讚美、肯定與提問等,來增強表達效果。
用適當的語氣和得體的措辭來表達不同意見。
利用可視輔助物 控制緊張的情緒,例如做深呼吸、
進行停頓、放緩語速。 控制聲音,包括音量、音高、發音、
吐字等方面。 得體地運用身體語言,例如點頭、
微笑、眼神接觸、手勢等。 認真聆聽聽者的提問,並作出適
當的回答。 應用範圍: 每次報告不少於四分鐘
能力單元 能力元素 表現標準
GCCH416A 能寫作各種專業宣傳推介文書
1. 能準備寫作各種專業宣傳推介文書
2. 能寫作各種專業宣傳
推介文書 應用範圍: 情景:工作場所 專業:指學習的專科
領域,如:商業管理、物流、酒店等;也指工作中涉及的不同行業,如:鐘錶、美容、印刷等
寫作文書:各種專業宣傳推介文書,如:公司形象宣傳稿、活動消息發佈新聞稿、產品或服務推廣函等
其他學習內容:閱讀理解、語文及文化知識
1.1 確定寫作目標
1.2 確定讀者身分
1.3 搜集相關資料
1.4 擬定合適大綱
2.1 內容細節 清楚交代具體細節,如:時間、
地點、人物等。 清楚交代寫作的目的、事由、結
果等。 清楚展示重點或特色,配合環境
或發佈條件,以求突出個人或機構的形象。
展示優勢,例如展示產品、服務或機構的優點及過人之處。
展示具說服力的證據,適當引用權威及論證,以達到推廣的目的。
根據要求作適當的收結
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 42
2.2 語文表達與運用 主旨明確,文理連貫,條理分明,
銜接得宜。 詞語運用配合,語法正確,能靈
活運用幾種常見修辭手法,如:呼告、引用、襯托、誇張等,語氣風格配合溝通目的。
標點符號運用恰當,標題配合主旨,條目清晰明確,序號編排得當,格式符合標準。
2.3 寫作策略 仔細審題,認真寫作,並配合觀
察、分析,發揮創意及聯想。 配合,剪裁恰當 反覆修改:校對稿件文字格式及
遣詞用語 利用恰當的版面處理(封面、圖
表、釘裝)以增強形象效果。
教材: 由語文學科中文項目發展小組開發 參考書目:
1. 邵敬敏編(2007)。《現代漢語通論》(第 2 版)。上海:上海教育出版社。
2. 李錦昌(2008)。《商業傳意與應用文大全》。香港:商務印書館(香港)有限公司。
3. 中國社會科學院語言研究所詞典編輯室編(2012)。《現代漢語詞典》(第 6 版)。北京:商務印書館。
Creation/Revision Record:
Version Date Created/Revised by
1 Jan 2011 Qiu Xiaoyan, Lo Hau Yee
2 Jan 2012 Lo Hau Yee
3 Mar 2014 Lo Hau Yee
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 43
Module Syllabus
Module Title English and Communication: Persuasive Presentations
Module Code LAN4108
QF Credits 9
QF Level 4
Notional Learning Hours
90 hrs
Contact Hours*: 26 hrs
Lecture - hrs Tutorial 18 hrs Workshop/Lab 8 hrs
Visit/Seminar - hrs
Self-study Hours: 64 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Aim:
This module aims to enable students to demonstrate reasonable clarity in presenting extended spoken texts relating to a wide range of both familiar and some new contexts, and expressed in complex language*, in order to communicate, effectively and with some confidence, information, ideas, related explanations, discussion/argument, and evaluation when conveying compliments, persuasion and emotion.
*Reference should be made to the Common European Framework of Reference for Languages Level B2/B2+ for the relevant language proficiency underpinning this competency.
Module Intended Learning Outcome: On completion of the module, students are expected to be able to express compliments, persuasion and emotion in oral presentations of information, ideas, related explanations, discussion/argument, and evaluation. This should be evidenced by students’ ability to:
1. discuss audiences’ specific problem(s)/need(s).
2. express compliments and emotion, and use persuasive language with tact and subtlety.
3. express sensitive evaluation of the resulting anticipated benefits of the proposed recommendations.
4. speak persuasively and confidently through appropriate and tactful explanations and discussion/argument when proposing a solution/an idea.
5. demonstrate a reasonable level of accuracy in using complex grammatical structures involving all verb forms, tenses, modals and discourse markers and a growing range of
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 44
alternative constructions that reflect variations in register.
Learning and Teaching Strategies: Learning and teaching activities are devised to align with the intended learning outcome
and thus to help students attain the Unit of Competency at this level. A learner-centred approach is adopted and students are given ample opportunities to use the target language to carry out various communication tasks set in trade-specific contexts through engaging in a wide range of activities such as pair work, group discussions, and role plays. Grammar learning is also incorporated in trade contexts.
Trade-specific authentic materials and simulated workplace situations are adopted to contextualise the learning and teaching of the four language skills, grammar and vocabulary.
To facilitate the development of learner autonomy required at QF Level 4, students are encouraged to take charge of their own learning and develop a capacity for critical reflection. Students are expected to take the initiative to draw up their own independent learning plan, identify learning targets, monitor learning progress and assess learning outcomes. They have to participate in a variety of self-initiated language activities, work independently on e-learning and other extended language learning tasks, and constantly reflect on their language learning experience.
There is a close collaboration with disciplines to develop a whole-campus approach to language learning support and a language-across-the-curriculum approach to learning and teaching. Reading across the curriculum using discipline-specific texts and journals is to be reinforced. Cross-curricular collaboration in building up students’ terminology and raising students’ awareness of the need for continuous improvement of linguistic proficiency in their trade modules is to be worked out.
Assessment Scheme:
Continuous Assessment (CA) 40%
End of Module Assessment (EA) 60%
Total 100%
Continuous Assessment will be set as part of assessment for learning. Students will complete various tasks such as reading/viewing records, language practice and online language tasks. They will be assessed during the learning process, with continuous feedback given by the teacher. An End of Module Assessment will be administered to assess students’ attainment of the Unit of Competency at this level.
Assessment Guidelines: 1. The assessment presentation could be recorded for verification purposes.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 45
2. The assessment could be conducted face-to-face, or as if on the telephone or in a video teleconference.
3. An individual may be assessed on an actual presentation or in a simulated activity conducted with (a) peer(s) or, if absolutely necessary, (a) teacher(s)/assessor(s).
Key Content Area: The following Unit of Competency is adopted from the Specification of Generic (Foundation) Competencies under the Qualifications Framework.
Unit of Competency Performance Criteria GCEN404A-3 Express compliments, persuasion, and emotion in oral presentations of information, ideas, related explanations, discussion/argument, and evaluation (Speaking)
1. Appropriate information/ideas are communicated with a clear purpose and message.
2. The information/ideas are organised logically. 3. The presentation is structured appropriately, usually with
an introduction, message and conclusion. 4. Communicative functions are handled appropriately 5. The language used is appropriate to the task. 6. The spoken delivery (pace and volume) is appropriate to
the task. 7. Non-verbal signals are used appropriately. 8. If audio-visual aids and/or video play an essential part in
the presentation, they should be incorporated appropriately into the delivery, both linguistically and physically.
Range Speech should be fairly fluent. Speech may include some grammatical errors, but these
should not interfere with meaning or impose interpersonal strain on a sympathetic listener.
Articulation, intonation, stress and rhythm should be fairly well controlled.
The register should suit the audience and purpose. Non-verbal signals may include facial expressions, other
body language, and active listening articulations. The physical handling of audio-visual aids and/or realia
may include pointing to graphics, demonstrating the use or characteristics of objects, and manipulating equipment.
Language Features a growing range of vocabulary complex grammatical structures:
simple/compound/complex sentences
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 46
Unit of Competency Performance Criteria positive/negative/interrogative/imperative forms all verb forms/tenses/modals/discourse markers (e.g.
conjunctions, sequence words, etc) complex constructions (e.g.conditionals, comparison,
concession, etc) a growing range of alternative constructions that
reflect variations in register a linguistic repertoire that demonstrates subtlety, tact and
sensitivity
Textbooks: In–house teaching and learning materials
References:
1. Clarke S., Powell M., Sharma P. 2010, In Company: Upper Intermediate, Macmillan Publishers Limited.
2. Williams E. 2013, Presentations in English (11th ed.), Macmillan Publishers Limited.
3. Yule, G. 2009, Oxford Practice Grammar (Advanced), Oxford: Oxford University Press.
Creation/Revision Record:
Version Date Created/Revised by
1 Dec 2010 Carol Sze Pui Shan
2 Jan 2011 Carol Sze Pui Shan
3 Mar 2011 Carol Sze Pui Shan
4 Mar 2014 Mabel Wong Chau Ping
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 47
Module Syllabus
Module Title English and Communication: Promotional Materials
Module Code LAN4101
QF Credits 10
QF Level 4
Notional Learning Hours
100 hrs
Contact Hours*: 39 hrs
Lecture - hrs Tutorial 27 hrs
Workshop/Lab 12 hrs
Visit/Seminar - hrs
Self-study Hours: 61 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Aim:
This module aims to enable students to demonstrate reasonable clarity in writing extended texts relating to a wide range of both familiar and some new workplace contexts, and expressed in complex language*, in order to communicate, effectively and with confidence, information, ideas, related explanations, discussion/argument, and evaluation when conveying persuasion and emotion.
*Reference should be made to the Common European Framework of Reference for Languages Level B2/B2+ for the relevant language proficiency underpinning this competency.
Module Intended Learning Outcome:
On completion of the module, students are expected to be able to express persuasion and emotion when presenting information, ideas, related explanations, discussion/argument, and evaluation in written form. This should be evidenced by students’ ability to:
express persuasion and emotion effectively when promoting products/services/projects/events
handle information effectively when promoting oneself in work-related contexts
discuss readers’ specific problems/needs in proposals.
present tactful explanations and discussion/argument with subtlety and sensitivity when proposing response(s)/solution(s).
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 48
write persuasively through suitable and sensitive evaluation of information and the conclusions drawn from it.
adopt an appropriate register and style for different types of persuasive writing.
demonstrate a reasonable level of accuracy in using complex grammatical structures involving all verb forms, tenses, modals and discourse markers and a growing range of alternative constructions that reflect variations in register.
Learning and Teaching Strategies:
Learning and teaching activities are devised to align with the intended learning
outcome and thus to help students attain the Unit of Competency at this level. A learner-centred approach is adopted and students are given ample opportunities to use the target language to carry out various communication tasks set in trade-specific contexts through engaging in a wide range of activities such as pair work, group discussions, and role plays. Grammar learning is also incorporated in trade contexts.
Trade-specific authentic materials and simulated workplace situations are adopted to contextualise the learning and teaching of the four language skills, grammar and vocabulary.
To facilitate the development of learner autonomy required at QF Level 4, students are encouraged to take charge of their own learning and develop a capacity for critical reflection. Students are expected to take the initiative to draw up their own independent learning plan, identify learning targets, monitor learning progress and assess learning outcomes. They have to participate in a variety of self-initiated language activities, work independently on e-learning and other extended language learning tasks, and constantly reflect on their language learning experience.
There is a close collaboration with disciplines to develop a whole-campus approach to language learning support and a language-across-the-curriculum approach to learning and teaching. Reading across the curriculum using discipline-specific texts and journals is to be reinforced. Cross-curricular collaboration in building up students’ terminology and raising students’ awareness of the need for continuous improvement of linguistic proficiency in their trade modules is to be worked out.
Assessment Scheme:
Continuous Assessment (CA) 40%
End of Module Assessment (EA) 60%
Total 100%
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 49
Continuous Assessment will be set as part of assessment for learning. Students will complete various tasks such as reading/viewing records, language practice and online language tasks. They will be assessed during the learning process, with continuous feedback given by the teacher. An End of Module Assessment will be administered to assess students’ attainment of the Unit of Competency at this level.
Assessment Guidelines:
Input or rubrics for the task can include written or aural texts, or simple instructions.
Key Content Area:
The following Unit of Competency is adopted from the Specification of Generic (Foundation)
Competencies under the Qualifications Framework.
Unit of Competency Performance Criteria
GCEN407A-3 Express persuasion and emotion when
1. Appropriate information/ideas are communicated with a clear purpose and message.
2. The information/ideas are organised logically. 3. The text is structured appropriately.
presenting information, ideas, related explanations, discussion/ argument, and evaluation in written form (Writing)
4. Communicative functions are handled appropriately. 5. An appropriate format is used. 6. The language used is appropriate to the task. 7. An appropriate register is used. 8. If graphic representations play an essential part in the text,
they should be incorporated appropriately, both linguistically and physically.
Range The writing should demonstrate control of commonly used
grammatical structures and vocabulary, but there may be mistakes in grammar, spelling or punctuation with more advanced language. However, these should not impose any strain on the reader.
Language Features a growing range of vocabulary complex grammatical structures:
simple/compound/complex sentences positive/negative/interrogative/imperative forms
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 50
all verb forms/tenses/modals/discourse markers (e.g. conjunctions, sequence words, etc)
complex constructions (e.g. conditionals, comparison, concession , etc)
a growing range of alternative constructions to reflect variations in register
Textbooks:
In–house teaching and learning materials References:
1.
Clarke, S., Powell, M., Sharma, P. (2010). In Company: Upper Intermediate, Oxford: Macmillan Publishers Limited.
2. Krizan, A. C., Merrier, P., Logan, J. & Williams, K. (2011). Business communication (8th ed.). Cincinnati, OH: South-Western Thomas Learning.
3. Johnson-Sheesan, R. (2008). Writing Proposals (2nd ed.). New York: Pearson/Longman.
4. Yule, G. (2009). Oxford Practice Grammar (Advanced). Oxford: Oxford University Press.
Creation/Revision Record:
Version Date Revised by
1 Dec 2010 Carol Sze Pui Shan
2 Jan 2011 Carol Sze Pui Shan
3 Mar 2011 Carol Sze Pui Shan
4 Mar 2014 Mabel Wong Chau Ping
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 51
Module Syllabus
Module Title English and Communication: Reports
Module Code LAN4107
QF Credits 9
QF Level 4
Notional Learning Hours
90 hrs
Contact Hours*: 26 hrs
Lecture - hrs
Tutorial 18 hrs
Workshop/Lab 8 hrs
Visit/Seminar - hrs
Self-study Hours: 64 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Aim: This module aims to enable students to demonstrate reasonable clarity in writing extended texts relating to a wide range of both familiar and some new workplace contexts, and expressed in complex language*, in order to communicate, effectively and with confidence, information, ideas, related explanations, discussion/argument, and evaluation when conveying suggestions.
*Reference should be made to the Common European Framework of Reference for Languages Level B2/B2+ for the relevant language proficiency underpinning this competency.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 52
Module Intended Learning Outcome: On completion of the module, students are expected to be able to express suggestions when presenting information, ideas, related explanations, discussion/argument, and evaluation in written form. This should be evidenced by students’ ability to:
1. state the background and establish the purpose of a report precisely.
2. analyse, synthesise and evaluate information in the findings and discussion sections critically.
3. express suggestions and recommendations persuasively, stating their resulting benefits through appropriate and tactful explanation and argument.
4. draw conclusions logically from findings through appropriate and sensitive evaluation of information.
5. demonstrate a reasonable level of accuracy in using complex grammatical structures involving all verb forms, tenses, modals and discourse markers and a growing range of alternative constructions that reflect variations in register.
Learning and Teaching Strategies:
Learning and teaching activities are devised to align with the intended learning outcome and thus to help students attain the Unit of Competency at this level. A learner-centred approach is adopted and students are given ample opportunities to use the target language to carry out various communication tasks set in trade-specific contexts through engaging in a wide range of activities such as pair work, group discussions, and role plays. Grammar learning is also incorporated in trade contexts.
Trade-specific authentic materials and simulated workplace situations are adopted to contextualise the learning and teaching of the four language skills, grammar and vocabulary.
To facilitate the development of learner autonomy required at QF Level 4, students are encouraged to take charge of their own learning and develop a capacity for critical reflection. Students are expected to take the initiative to draw up their own independent learning plan, identify learning targets, monitor learning progress and assess learning outcomes. They have to participate in a variety of self-initiated language activities, work independently on e-learning and other extended language learning tasks, and constantly reflect on their language learning experience.
There is a close collaboration with disciplines to develop a whole-campus approach to language learning support and a language-across-the-curriculum approach to learning and teaching. Reading across the curriculum using discipline-specific texts and journals is to be reinforced. Cross-curricular collaboration in building up students’ terminology and raising students’ awareness of the need for continuous improvement of linguistic proficiency in their trade modules is to be worked out.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 53
Assessment Scheme:
Continuous Assessment (CA) 40%
End of Module Assessment (EA) 60%
Total 100%
Continuous Assessment will be set as part of assessment for learning. Students will complete various tasks such as reading/viewing records, language practice and online language tasks. They will be assessed during the learning process, with continuous feedback given by the teacher. An End of Module Assessment will be administered to assess students’ attainment of the Unit of Competency at this level.
Assessment Guidelines: Input or rubrics for the task can include written or aural texts, or simple instructions.
Key Content Area:
The following Unit of Competency is adopted from the Specification of Generic (Foundation) Competencies under the Qualifications Framework.
Unit of Competency Performance Criteria GCEN407A-2 Express suggestions when presenting information, ideas, related explanations, discussion/argument, and evaluation in written form (Writing)
1. Appropriate information/ideas are communicated with a clear purpose and message.
2. The information/ideas are organised logically. 3. The text is structured appropriately. 4. An appropriate format is used. 5. The language used is appropriate to the task. 6. An appropriate register is used. 7. If graphic representations play an essential part in the text,
they should be incorporated appropriately, both linguistically and physically.
Range The writing should demonstrate control of commonly used grammatical structures and vocabulary, but there may be mistakes in grammar, spelling or punctuation with more advanced language. However, these should not impose any strain on the reader.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 54
Unit of Competency Performance Criteria Language Features
a growing range of vocabulary complex grammatical structures:
simple/compound/complex sentences positive/negative/interrogative/imperative forms all verb forms/tenses/modals/discourse markers
(e.g. conjunctions, sequence words, etc) complex constructions (e.g. conditionals, comparison,
concession, etc) a growing range of alternative constructions that reflect
variations in register a linguistic repertoire that demonstrates subtlety, tact and
sensitivity
Textbooks: In–house teaching and learning materials
References:
1. Clarke S., Powell M., Sharma P. 2010, In Company: Upper intermediate, Macmillan Publishers Limited.
2. Bowden J. 2011, Writing a Report – how to prepare, write and present really effective reports (9th ed.), How to Books Limited.
3. Yule, G. 2009, Oxford Practice Grammar (Advanced), Oxford: Oxford University Press.
Creation/Revision Record:
Version Date Revised by
1 Dec 2010 Carol Sze Pui Shan
2 Jan 2011 Carol Sze Pui Shan
3 Mar 2011 Carol Sze Pui Shan
4 Mar 2014 Mabel Wong Chau Ping
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 55
Module Syllabus
Module Title English and Communication: Workplace Correspondence
Module Code LAN3103
QF Credits 6
QF Level 3
Notional Learning Hours
60 hrs
Contact Hours*: 26 hrs
Lecture - hrs Tutorial 18 hrs
Workshop/Lab 8 hrs
Visit/Seminar - hrs
Self-study Hours: 34 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Aim:
This module aims to enable students to understand and respond, with reasonable clarity, to incoming workplace written correspondence involving predictable information, ideas, related explanations, discussion/argument, and evaluation relating to a wide range of largely familiar workplace contexts, and expressed in increasingly complex language*, in order to communicate effectively and with some confidence when handling problems.
*Reference should be made to the Common European Framework of Reference for Languages Level B1+/B2 for the relevant language proficiency underpinning this competency.
Module Intended Learning Outcome: On completion of the module, students are expected to be able to handle problems in incoming written correspondence involving predictable information, ideas, related explanations, discussion/argument, and evaluation. This should be evidenced by students’ ability to: 1. read for main ideas and extract relevant information from workplace documents for
handling specific problems.
2. handle problems such as complaints from colleagues and customers by explaining causes of problems, empathising with the reader, offering advice and evaluating solutions to problems.
3. deal with acceptance and refusal of responsibilities in different workplace situations.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 56
4. adopt a diplomatic tone and express goodwill.
5. demonstrate a reasonable level of accuracy in using increasingly complex grammatical structures involving a wide variety of verb forms, tenses, modals and discourse markers.
Learning and Teaching Strategies: Learning and teaching activities are devised to align with the intended learning outcome
and thus to help students attain the Unit of Competency at this level. A learner-centred approach is adopted and students are given ample opportunities to use the target language to carry out various communication tasks set in trade-specific contexts through engaging in a wide range of activities such as pair work, group discussions, and role plays. Grammar learning is also incorporated in trade contexts.
Trade-specific authentic materials and simulated workplace situations are adopted to contextualise the learning and teaching of the four language skills, grammar and vocabulary.
To foster learner autonomy, students are encouraged to continue language learning beyond the classroom and build up a stronger sense of ownership of their learning. Students have to participate in self-initiated language activities, work independently on e-learning, and keep records of such work and progress throughout. Students’ progress and achievements are regularly monitored and assessed.
There is a close collaboration with disciplines to develop a whole-campus approach to language learning support and a language-across-the-curriculum approach to learning and teaching. Reading across the curriculum using discipline-specific texts and journals is to be reinforced. Cross-curricular collaboration in building up students’ terminology and raising students’ awareness of the need for continuous improvement of linguistic proficiency in their trade modules is to be worked out.
Assessment Scheme:
Continuous Assessment (CA) 40%
End of Module Assessment (EA) 60%
Total 100%
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 57
Continuous Assessment will be set as part of assessment for learning. Students will complete various tasks such as reading/viewing records, language practice and online language tasks. They will be assessed during the learning process, with continuous feedback given by the teacher. An End of Module Assessment will be administered to assess students’ attainment of the Unit of Competency at this level.
Assessment Guidelines:
1. As the focus of this competency is on writing, reading should be seen as facilitating input.
2. Input texts should be selected at an appropriate level of difficulty for the task.
Key Content Area: The following Unit of Competency is adopted from the Specification of Generic (Foundation) Competencies under the Qualifications Framework.
Unit of Competency Performance Criteria GCEN306A-3 Handle problems in incoming written correspondence involving predictable information, ideas, related explanations, discussion/ argument, and evaluation (Reading and Writing)
1. The purpose of incoming correspondence is understood through identification of the writer, context and subject.
2. The message of incoming correspondence is understood through identification of the main ideas and specific details.
3. Information/ideas that are appropriate to the purpose and message are given in the response.
4. Appropriate expressions of goodwill are given. 5. An appropriate format is used. 6. The response is organised appropriately. 7. A polite tone is used. 8. The language used is appropriate to the task. 9. Tasks are performed in a timely manner. Range The writing may include some grammatical, spelling or punctuation mistakes, but these should not interfere with meaning or impose strain on a sympathetic reader. Language Features a growing range of vocabulary increasingly complex grammatical structures:
simple/compound/complex sentences positive/negative/interrogative/imperative forms
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 58
a wide variety of verb forms/tenses/ modals/discourse markers (e.g. conjunctions, sequence words, etc)
complex constructions (e.g. conditionals, comparison, concession, etc)
a small range of alternative constructions that reflect variations in register
Textbooks: In–house teaching and learning materials
References: 1. Clarke S., Powell M., Sharma P. 2009, In Company: Intermediate, Macmillan
Publishers Limited.
2. Guffey, M. E. 2010, Essentials of business communication (8th ed.), Mason, OH: South-Western Cengage Learning.
3. Emmerson, P. 2013, Email English (2nd ed.), Macmillan.
4. Yule, G. 2009, Oxford Practice Grammar (Advanced), Oxford: Oxford University Press.
Creation/Revision Record:
Version Date Created/Revised by
1 Dec 2010 Carol Sze Pui Shan
2 Jan 2011 Carol Sze Pui Shan
3 Mar 2011 Carol Sze Pui Shan
4 Mar 2014 Mabel Wong Chau Ping
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 59
Module Syllabus
Module Title English and Communication: Workplace Interaction
Module Code LAN3100
QF Credits 6
QF Level 3
Notional Learning Hours
60 hrs
Contact Hours*: 26 hrs
Lecture - hrs
Tutorial 18 hrs
Workshop/Lab 8 hrs
Visit/Seminar - hrs
Self-study Hours: 34 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Aim: This module aims to enable students to participate, at a sufficient level of comprehension and clarity, in oral interactions of increasing length, relating to a wide range of largely familiar workplace contexts, and expressed in increasingly complex language*, in order to understand and communicate, effectively and with some confidence, predictable information, ideas, related explanations, discussion/argument, and evaluation when handling suggestions, offers, preference and persuasion.
*Reference should be made to the Common European Framework of Reference for Languages Level B1+/B2 for the relevant language proficiency underpinning this competency.
Module Intended Learning Outcome: On completion of the module, students are expected to be able to handle suggestions, offers, preference and persuasion in oral interactions involving predictable information, ideas, related explanations, discussion/argument, and evaluation. This should be evidenced by students’ ability to:
1. participate effectively in discussions/meetings/negotiations/ with colleagues/clients on workplace topics/issues.
2. make and respond to suggestions, offers, preference and persuasion by giving opinions with justification appropriately.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 60
3. initiate and handle interruptions and clarifications effectively.
4. demonstrate a reasonable level of accuracy in using increasingly complex grammatical structures involving a wide variety of verb forms, tenses, modals and discourse markers.
Learning and Teaching Strategies: Learning and teaching activities are devised to align with the intended learning outcome
and thus to help students attain the Unit of Competency at this level. A learner-centred approach is adopted and students are given ample opportunities to use the target language to carry out various communication tasks set in trade-specific contexts through engaging in a wide range of activities such as pair work, group discussions, and role plays. Grammar learning is also incorporated in trade contexts.
Trade-specific authentic materials and simulated workplace situations are adopted to contextualise the learning and teaching of the four language skills, grammar and vocabulary.
To foster learner autonomy, students are encouraged to continue language learning beyond the classroom and build up a stronger sense of ownership of their learning. Students have to participate in self-initiated language activities, work independently on e-learning, and keep records of such work and progress throughout. Students’ progress and achievements are regularly monitored and assessed.
There is a close collaboration with disciplines to develop a whole-campus approach to language learning support and a language-across-the-curriculum approach to learning and teaching. Reading across the curriculum using discipline-specific texts and journals is to be reinforced. Cross-curricular collaboration in building up students’ terminology and raising students’ awareness of the need for continuous improvement of linguistic proficiency in their trade modules is to be worked out.
Assessment Scheme:
Continuous Assessment (CA) 40%
End of Module Assessment (EA) 60%
Total 100%
Continuous Assessment will be set as part of assessment for learning. Students will complete various tasks such as reading/viewing records, language practice and online language tasks. They will be assessed during the learning process, with continuous feedback given by the teacher. An End of Module Assessment will be administered to assess students’ attainment of the Unit of Competency at this level.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 61
Assessment Guidelines: 1. The assessment interactions could be recorded for verification purposes.
2. The assessments could be conducted face-to-face, or as if on the telephone or in a video teleconference.
3. An individual may be assessed on an actual exchange or in a simulated activity conducted with (a) peer(s) or, if absolutely necessary, (a) teacher(s)/assessor(s).
4. As the initiator of a topic or giver of a piece of information is, by definition, psychologically and linguistically better prepared than his/her interlocutor(s), assessors could ensure that, before the assessment interactions, all parties in them are given instructions/stimuli that relate to a mix of both common and individual information so that they have an equal opportunity to deliver and respond to both known and unknown information.
Key Content Area: The following Unit of Competency is adopted from the Specification of Generic (Foundation) Competencies under the Qualifications Framework.
Unit of Competency Performance Criteria GCEN303A-2 Handle suggestions, offers, preference and persuasion in oral interactions involving predictable information, ideas, related explanations, discussion/argument, and evaluation (Listening and speaking)
1. The purpose of the interaction is communicated/understood through identification of the context and subject, and of the initiator’s communicative intent.
2. The message of the interaction is communicated/understood through identification of the gist, main ideas and specific details.
3. Specific information/ideas in the interaction are communicated and/or identified/extracted appropriately.
4. Communicative functions are handled appropriately. 5. Development of the interaction is achieved through
appropriate responses and contributions. 6. Turns are taken according to the conventions of the
interaction type. 7. Clarification is sought and given when necessary to
help communication. 8. The language used is appropriate to the task. 9. Non-verbal signals are used appropriately. Range Speech should be fairly fluent when expressing simple,
familiar ideas and language, but more hesitant with more complex and unfamiliar content/language.
Speech may include some grammatical errors, but these should not interfere with meaning or impose interpersonal strain on a sympathetic listener.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 62
Unit of Competency Performance Criteria Articulation, intonation, stress and rhythm should be
fairly well controlled when expressing simple, familiar ideas and language, but less controlled with more complex and unfamiliar content and language.
The exchange should be sufficient for each speaker. The register should suit the audience and purpose. Non-verbal signals may include facial expressions,
other body language, and active listening articulations. Language Features a growing range of vocabulary increasingly complex grammatical structures:
simple/compound/complex sentences positive/negative/interrogative/imperative forms a wide range of verb forms/tenses/modals/discourse
markers (e.g. conjunctions, sequence words, etc) complex constructions (e.g. conditionals,
comparison, concession, etc) a small range of alternative constructions that reflect
variations in register
Textbooks: In–house teaching and learning materials
References: 1. Clarke S., Powell M., Sharma P. 2009, In Company: Intermediate, Macmillan
Publishers Limited.
2. Stephens, B. 2011, Meetings in English, Macmillan.
3. Yule, G. 2009, Oxford Practice Grammar (Advanced), Oxford: Oxford University Press.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 63
Creation/Revision Record:
Version Date Created/Revised by
1 Dec 2010 Carol Sze Pui Shan
2 Jan 2011 Carol Sze Pui Shan
3 Mar 2011 Carol Sze Pui Shan
4 Mar 2014 Mabel Wong Chau Ping
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 64
Module Syllabus
Module Title Collaboration, Teamwork & Social Engagement
Module Code SDD4006 / SDD4006M
QF Credits 6
QF Level 4
Notional Learning
Hours 60 hrs
Contact Hours*: 26 hrs (for pre-employment programme)
18 hrs (for in-service programme)
Self-study Hours:
34 (for pre-employment programme)
42 (for in-service programme)
Assessment Hours: - hrs
(Outside Contact/Self-study Hours)
Exemption Criteria
The exemption will be granted for students who fulfill either of the following exemption criteria (1) or (2):
(1) Academic Criteria
A pass in SDD4002 or WPD3202S
AND
A pass in SDD4003 or WPD4201S
OR
A pass in a comparable academic achievement
(2) Work Experience with Pass in Exemption Assessment
A pass in the assessment for module exemption, plus two years full-time work experience acquired after meeting HD Minimum Entrance requirement.
Module Aim:
This module aims to enable students to develop the necessary competencies in building up effective interpersonal relationships, and to perform as good team players. It also aims to enhance students’ social awareness.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 65
Module Intended Learning Outcomes: On completion of the module, learners are expected to be able to:
1. apply communication skills in building effective interpersonal relationship;
2. perform as a good team player with collaboration skills; and
3. analyze social issues to foster their social awareness as engaged citizen.
Learning and Teaching Strategies:
1. A student-centred learning and teaching approach will be adopted to facilitate students’ advancement in communication, teamwork and social awareness. Students will be given opportunities to integrate the learning attributes through participation in different activities such as interactive workshop activities, group discussion, site visit, fieldwork, project-based learning activity and individual presentation. Through different activities, the experiential learning model of linking training with learning will be adopted to debrief students and help them to articulate their learning.
2. Project-based learning activity will be provided to students as a platform to review their behaviour in a team context and to enhance their collaboration skills.
3. Students’ learning will be kept track through various means, such as written exercise, in-class activities, and project implementation. The products of students’ project will be collected to demonstrate students’ competency and the impacts made to the society. Students’ works will also be contributing to their career portfolio for graduation.
4. Students will be encouraged to extend their learning experiences beyond workshops to develop their teamwork and collaboration skills as well as to enrich their social awareness. They are encouraged to join various student groups and discipline projects to practice their learnt skills and to serve others with the sense of responsible citizen.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 66
Assessment Scheme:
Continuous Assessment (CA) 50%
End-of-Module Assessment (EA) 50%
Total 100%
Continuous assessment is used to check the students’ learning and to monitor the progress of teaching. A mixed mode of assessment components is adopted to collect a composite score which will be expressed in the form of grade. The grading criteria are:
70 or above Pass with Merit
40-69 Pass
0-39 Fail
Key Content Area: The following Units of Competency (UoCs) are created to guide the delivery of the whole module in order to achieve the intended learning outcomes.
Unit of Competency Performance Criteria SWPD411
Apply communication skills in building effective interpersonal relationship
1. Advanced understanding of interpersonal relationship.
Range: Topics may include but not limited to the impact of advanced technology on human relationship, the effect of socioeconomic changes and different mindsets on people relationship and the model of effective communication.
2. Apply appropriate communication skills in various contexts and at different life stages.
Range: Topics may include but not limited to the usage of empathy and listening skills, and case studies in various social contexts and at different life stage.
3. Exercise effective conflict resolution.
Range: Topics may include but not limited to the usage of emotional control, effective conflict resolution process and case studies in different interpersonal scenarios.
SWPD412
Perform as a good team player with collaboration skills
1. Carry out the principles of collaboration and teamwork.
Range: Topics may include but not limited to the positive mindset to foster collaboration and effective teamwork, and case studies in different scenarios
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 67
related to teamwork context.
2. Articulate essential attributes of leader and team member.
Range: Topics may include but not limited to team roles, and case studies and role plays in different scenarios related to the interaction between leader and members.
3. Apply strategies for managing group project and team dynamics.
Range: Topics may include but not limited to division of labour, team dynamics, and case studies and role plays in different scenarios related to group project management.
4. Implement a group project with the learnt skills.
Range: Topics may include but not limited to review and evaluate both team’s and member’s performance according to their application of appropriate skills.
SWPD413
Analyse social issues to foster social awareness as an engaged citizen
1. Analyse the current social issues.
Range: Topics may include but not limited to analyse social issues related to sustainable development, citizenship, or civic matters with case studies.
2. Take action for sustainable development for a contemporary society.
Range: Topics may include but not limited to the understanding of sustainable development goals and devise an action plan to tackle social issue
3. Employ positive attitude as an engaged citizen.
Range: Topics may include but not limited to the responsibility and rights of a citizen, the dilemma between social good and self-interest, and case studies in various scenarios related to engaged citizenship.
References:
1. Eunson, B. (2016). Communicating in the 21st century. Milton, Qld.: Wiley.
2. Bagwell, C., & Schmidt, M. E. (2011). Friendships in Childhood and Adolescence. New York: The Guilford Press.
3. Wood, Julia, (2014). Interpersonal communication - everyday encounters. Boston:Cengage Learning.
4. DeVito, J. A. (2016). The Interpersonal Communication Book. Boston: Pearson
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 68
Education.
5. Beebe, S. A. (2017). Communication: Principles for a lifetime. Vancouver, B.C.: Langara College.
6. Bob LaRocca (2017). Transforming Education: Social Awareness Toolkit. Retrieved on 3 August 2018 from https://www.transformingeducation.org/resources/for-educators/
7. Berne, E. (2015). Transactional analysis in psychotherapy: A systematic individual and social psychiatry. Mansfield Centre, CT: Martino Publishing.
8. Schnell, E.; Hammer, A. (2000). FIRO-B® Technical Guide. Mountain View, CA: CPP, Inc.
9. Stewart, I., & Joines, V. (2014). TA today: A new introduction to transactional analysis. Melton Mowbray: Lifespace Publishing.
10. Roy Lilley. (2016). Dealing with difficult people. London: Kogan Page.
11. Tuhowsky, I., & Tuhovsky, I. (2017). The science of effective communication: Improve your social skills and small talk, develop charisma and learn how to talk to anyone. Middletown, DE: CreateSpace Independent Publishing Platform.
Creation/Revision Record:
Version Date Created/Revised by
1 24 September 2018 Ms LAU Sze Lui,
Ms YUM Yuen Han,
Ms CHUM Yin Ping,
Mr LAU Ho Ming
2 21 January 2019 Ms LAU Sze Lui,
Ms YUM Yuen Han,
Ms CHUM Yin Ping,
Mr LAU Ho Ming
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 69
Module Syllabus
Module Title Enhancing Competencies in the 21st Century Workplace
Module Code SDD4007
QF Credits 3
QF Level 4
Notional Learning
Hours 30 hrs
Contact Hours*:
13 hrs (for pre-employment programme)
9 hrs (for in-service programme)
Self-study Hours:
17 (for pre-employment programme)
21 (for in-service programme)
Assessment Hours: - hrs
(Outside Contact/Self-study Hours)
Exemption Criteria
The exemption will be granted for students who fulfill either of the following exemption criteria (1) or (2):
(3) Academic Criteria A pass in SDD4004
OR A pass in WPD3203S
OR A pass in WPD3204S
OR A pass in WPD4074
OR A pass in a comparable academic achievement
(4) Work Experience with Pass in Exemption Assessment
A pass in the assessment for module exemption, plus two years full-time work experience acquired after meeting HD Minimum Entrance requirement.
Module Aim:
This module aims to enhance students’ competencies in formulating their own career development strategies. It also aims to foster students’ lifelong learning skills as well as exercising appropriate work ethics and workplace etiquette.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 70
Module Intended Learning Outcomes: On completion of the module, students are expected to be able to:
1. select appropriate personal strategies for career development;
2. illustrate one’s lifelong learning skills to prepare for the challenges in workplace; and
3. exercise responsible judgement and action with appropriate work ethics and workplace etiquette in a specific trade.
Learning and Teaching Strategies:
1. A student-centred learning and teaching approach will be adopted to help students formulate career development plan with lifelong learning strategies as well as to develop appropriate work ethics and workplace etiquette.
2. Experiential learning approach will be adopted to facilitate students’ learning through hands-on preparation of career portfolio, participation in mock interview and various career-related activities. Those learning activities will be debriefed to help students link up training with learning and then to generate new ideas through reflection from the experiences.
3. Students are encouraged to extend their learning experiences beyond workshops to strengthen their individual goals and aspirations. Extra-curricular activities related to career development, work attitude, career image and ethics, work etiquette, industry trends, career in Mainland, and career coaching will be organized to help students further extend their learning experiences. They will be asked to collect various learning artefacts to produce their personal career portfolio for graduation.
4. Teachers will provide individual feedback to student in tutorials for making advancement in career goals formulation and their use of career strategies.
Assessment Scheme:
Continuous Assessment (CA) 50%
End-of-Module Assessment (EA) 50%
Total 100%
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 71
Continuous assessment is used to check the students’ learning and to monitor the progress of teaching. A mixed mode of assessment components is adopted to collect a composite score which will be expressed in the form of grade. The grading criteria are: 70 or above Pass with Merit 40-69 Pass 0-39 Fail
Key Content Area:
The following Units of Competency (UoCs) are created to guide the delivery of the whole module in order to achieve the intended learning outcomes. Unit of Competency Performance Criteria SWPD414 Select appropriate personal strategies for career development
1. Carry out job-hunting skills for vocational training.
Range: Topics may include but not limited to formulation of career goals and work plan, together with the corresponding job-hunting tactics.
2. Demonstrate interviewing skills in different contexts.
Range: Topics may include but not limited to skills for individual interview or group interview, and pre-interview preparation and post-interview review.
3. Produce e-portfolio for personal career planning.
Range: Topics may include but not limited to production of e-portfolio to show the matching among one’s career goal, personal attributes for the selected job, and personal calibre for the selected career.
SWPD415 Illustrate one’s lifelong learning skills to prepare for the challenges in workplace
1. Appreciate ever changes in the world of work and the impact of technology in workplaces.
Range: Topics may include but not limited to the impact of technology on job market (e.g. AI, VR, job obsolete and new job creation) and the influence of globalization.
2. Employ transferable skills for job transition.
Range: Topics may include but not limited to positive attitude for job changes, and mindset for lifelong learning.
3. Exercise self-regulation approach in workplaces.
Range: Topics may include but not limited to self-awareness of individual thoughts, feeling and behaviours in workplace, emotional management for colleague’ interaction, and exercise appropriate work
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 72
manner.
4. Enhance collaboration skills in workplaces.
Range: Topics may include but not limited to application of communication skills, team roles and dynamic, conflict resolution, and collaboration skills in workplace.
SWPD416 Exercise responsible judgement and action with appropriate work ethics and workplace etiquette in a specific trade
1. Develop work value and employ appropriate moral principles to suit the work context.
Range: Topics may include but not limited to review on personal value with company’s mission and value and select appropriate work ethics to fit the workplace or professional standard.
2. Exercise appropriate workplace etiquette.
Range: Topics may include but not limited to understanding of company’s regulation and informal culture, and self-management to fit in the workplace’s requirement.
References:
1. Petrus Ng, Xiqing Susan Su, Gina Lai, Dennis Chan, Eddie Ho, Vivien Chan, Heidi Leung, Vicki Kwan and Chloe Li (2016). A Holistic Model of Student Development: The Validation of Whole Person Development Inventory for College Students in Hong Kong. Measurement and Evaluation in Counseling and Development 1-21. Doi: 10.1177/0748175615625748
2. Martin, Tanya V.; Martin, Tanya V., editor. (2016). Career development: theories, practices and challenges. New York: Nova Publishers. MMS ID: 991005981819804681
3. Brown, D. (2011). Career Information, Career Counseling and Career Development (10th Ed.). Prentice Hall.
4. Dubrin, A. J. (2010). Human Relations for Career and Personal Success: Concepts, Applications, and Skills (9th Ed.). Pearson Prentice Hall.
5. Osborn, Debra S., 1968- Zunker, Vernon G., 1927- (2016). Using assessment results: career development (Ninth Edition). Boston, MA: Cengage Learning. MMS ID: 991000118099704681
6. Watson, Mark. Watson, M. B. (Mark Brownlee), 1949- McMahon, Mary, 1955- (2012). Career development global issues and challenges. New York: Nova Science Publishers. MMS ID: 991005964720704681
7. Baker, Michael J (2013). Career Development. Journal of customer behaviour. 2013, Vol.12(2), p.91-94. DOI: 10.1362/147539213X13832198548139
8. 水淼 (2010)。20 幾歲,就定位:打造通往未來的許可證!。好的文化。
9. Natashia Larkin (2018). Job interview tips 2018: Your complete guide to success.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 73
Retrieved from: https://www.cv-library.co.uk/career-advice/interviews/job-interview-tips-2018-complete-guide/
10. Michael Cheary (2018). Competency-based interviews: What you need to know. Retrieved from: https://www.reed.co.uk/career-advice/competency-based-interviews-what-you-need-to-know/
11. Home. (n.d.). Retrieved from https://mahara.org/
12. [email protected] (2018). Career Development Theories. Retrieved from: http://www.loveyourcareer.org/understnad-yourself/32-career-cunseling-tools/career-development -theories/26-career-development-theories#Happenstance
13. TheInterviewguys.com (2018). How to Master the START Method For Interview Questions. Retrieved from: https://theinterviewguys.com/star-method/
Creation/Revision Record:
Version Date Created/Revised by
1 24 September 2018 Ms LAU Sze Lui,
Mr CHAN Wai Yeung,
Mr KWONG Chin Fun,
Mr LAU Ho Ming
2 21 January 2019 Ms LAU Sze Lui,
Mr CHAN Wai Yeung,
Mr KWONG Chin Fun,
Mr LAU Ho Ming
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 74
Module Syllabus
Module Title MindShift: Achieving Personal Growth & Effectiveness
Module Code SDD4005 / SDD4005M
QF Credits 6
QF Level 4
Notional Learning
Hours 60 hrs
Contact Hours*:
26 hrs (for pre-employment programme)
18 hrs (for in-service programme)
Self-study Hours:
34 (for pre-employment programme)
42 (for in-service programme)
Assessment Hours: - hrs
(Outside Contact/Self-study Hours)
Exemption Criteria
The exemption will be granted for students who fulfill either of the following exemption criteria (1) or (2):
(1) Academic Criteria
A pass in SDD4001 OR
A pass in WPD3200S OR
A pass in WPD4063 & WPD4041 or WPD4082 OR
A pass in a comparable academic achievement (2) Work Experience with Pass in Exemption Assessment
A pass in the assessment for module exemption, plus two years full-time work experience acquired after meeting HD Minimum Entrance requirement.
Module Aim: This module aims to enable students to formulate effective self-improvement strategies and to develop good habits for pursing personal goals as well as meeting the impending challenges of the changing world.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 75
Module Intended Learning Outcomes: On completion of the module, learners are expected to be able to:
1. formulate self-improvement strategies to meet the needs of the changing world;
2. foster good habit building for well-being; and
3. articulate one’s personal goals in terms of personal potentials.
Learning and Teaching Strategies:
1. A student-centred learning and teaching approach will be adopted to facilitate students’ advancement in adaptability, resilience and potential development to achieve personal goals even in face of changing environments with adversity. Students will be given opportunities to integrate the learning attributes through participation in different activities such as interactive workshop activities, group discussion, individual presentation and physical activity workshops. Through different activities, the experiential learning model of linking training with learning will be adopted to debrief students and help them to articulate their learning.
2. Mutual support and peer feedback will be encouraged and adopted in the in-class activities, such as group sharing, to create a mutual support learning environment, which will help promote better adaptation and resilience building. Students will be given opportunities to learn from their peers as well as to give and receive feedback.
3. Students’ learning will be kept track through various means, such as written exercise, in-class activities, peer feedback, and presentation of their self-reflection. The products of students’ works will be collected as evidence to demonstrate their competency and will be contributing to their career portfolio for graduation.
4. Students will be encouraged to extend their learning experiences beyond workshops to build up personal goals and resilience for personal development. They are encouraged to participate in activities with manageable challenges, including sports activities and psychological skills training.
Assessment Scheme:
Continuous Assessment (CA) 50%
End of Module Assessment (EA) 50%
Total 100%
Continuous assessment is used to check the students’ learning and to monitor the progress of teaching. A mixed mode of assessment components is adopted to collect a composite score which will be expressed in the form of grade. The grading criteria are:
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 76
70 or above Pass with Merit
40-69 Pass
0-39 Fail
Key Content Area: The following Units of Competency (UoCs) are created to guide the delivery of the whole module in order to achieve the intended learning outcomes.
Unit of Competency
Performance Criteria
SWPD408 Formulate self-improvement strategies to meet the needs of the changing world
1. Articulate the impact of the changing world on people’s well-being.
Range: Topics may include but not limited to the impact of the Industry 4.0 and internet world, the importance of generic competencies in different scenarios related to the changing world.
2. Develop the growth mindset for self-improvement.
Range: Topics may include but not limited to the understanding of one’s mindset, the different impacts resulted from fixed and growth mindset, and the corresponding self-improvement strategies.
3. Employ self-regulation approach.
Range: Topics may include but not limited to the understanding of different emotions and the mechanism of one’s affective, physical and cognitive response to a variety of situations, and apply the knowledge of S-ABC model as for self-regulation.
SWPD409 Foster good habits for personal effectiveness
1. Review one’s experience in meeting challenges.
Range: Topics may include but not limited to review of one’s experience and to share the experience for building personal strength.
2. Employ interpretation strategies on resilience and application of new strategies.
Range: Topics may include but not limited to strategies for resilience and case studies in applying new approaches to handle various challenges.
3. Implement physical training exercise to enhance well-being.
Range: Topics may include but not limited to the appropriate health check and building habit of regular exercise for well-being.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 77
SWPD410 Articulate one’s personal goals in terms of personal potentials
4. Identify strategies for developing one’s potentials.
Range: Topics may include but not limited to set goals with personal strengths or potentials.
5. Apply strategies for self-improvement.
Range: Topics may include but not limited to applying growth mindset and building good habits for personal effectiveness on goral setting.
References:
1. Blackwell, L., Trzesniewski, K., & Dweck, C. (2007). Implicit Theories of Intelligence Predict Achievement Across an Adolescent Transition: A Longitudinal Study and an Intervention. Child Development. 78(1), 246-263. doi: 10.1111/j.1467-8624.2007.00995.x
2. Chao, M., Visaria, S., Mukhopadhyay, A., & Dehejia, R. (2017). Do rewards reinforce the growth mindset? Joint effects of the growth mindset and incentive schemes in a field intervention. Journal Of Experimental Psychology: General. 146(10), 1402-1419. doi: 10.1037/xge0000355
3. DeBacker, T., Heddy, B., Kershen, J., Crowson, H., Looney, K., & Goldman, J. (2018). Effects of a one-shot growth mindset intervention on beliefs about intelligence and achievement goals. Educational Psychology. 38(6), 711-733. doi: 10.1080/01443410.2018.1426833
4. Carlson, N., & Birkett, M. (2017). Physiology of behavior (12th ed.). England: Pearson Education Limited.
5. “Discover How to Rewire Your Brain with Neuroplasticity.” YouTube, YouTube, 11 June 2017. Retrieved from www.youtube.com/watch?v=bbLP-as1ABk.
6. Dweck, C. (2015). Carol Dweck Revisits the 'Growth Mindset'. Retrieved from https://www.edweek.org/ew/articles/2015/09/23/carol-dweck-revisits-the-growth-mindset.html
7. Dweck, C. (2016). Mindset: The New Psychology of Success. New York: Ballantine.
8. Kolb, B., Gibb, R., & Robinson, T. (2003). Brain Plasticity and Behavior. Current Directions in Psychological Science, 12(1), 1-5.
9. Leung, F. (Feb, 2018). Doing CBT in the Decade of the Mind: The S-ABC Model. Keynote Address at the 6th Asia CBT Conference. Dhaka, Bangladesh.
10. “Growing Lifelong Learners.” Science Impact. Retrieved from https://www.mindsetworks.com/default
11. Paunesku, D., Walton, G., Romero, C., Smith, E., Yeager, D., & Dweck, C. (2015). Mind-Set Interventions Are a Scalable Treatment for Academic Underachievement. Psychological Science, 26(6), 784-793. doi: 10.1177/0956797615571017
12. Wilson, T., & Buttrick, N. (2016). New directions in social psychological
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 78
interventions to improve academic achievement. Journal Of Educational Psychology, 108(3), 392-396. doi: 10.1037/edu0000111
13. Yeager, D., & Dweck, C. (2012). Mindsets That Promote Resilience: When Students Believe That Personal Characteristics Can Be Developed. Educational Psychologist, 47(4), 302-314. doi: 10.1080/00461520.2012.722805
Creation/Revision Record:
Version Date Created/Revised by
1 24 September 2018 Ms LAU Sze Lui,
Mr WONG Hon Chun,
Ms CHAN Siu Yung,
Ms WONG Ka Yi,
Mr LAU Ho Ming 2 21 January 2019 Ms LAU Sze Lui,
Mr WONG Hon Chun,
Ms CHAN Siu Yung,
Ms WONG Ka Yi,
Mr LAU Ho Ming
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 79
Module Syllabus
Module Title Information Technology Essentials – Design
Module Code ITE3003
QF Credits 6
QF Level 3
Notional Learning
Hours 65 hrs
Contact Hours*: 26 hrs
Lecture - hrs
Tutorial - hrs
Workshop/Lab 26 hrs
Visit/Seminar - hrs
Self-study Hours: 39 hrs
Assessment Hours: - hrs
(Outside Contact/Self-study Hours)
Module Rationale/Aims:
The module aims to strengthen students’ generic IT knowledge and skills in developing creative contents for effective presentation and communication in order to enhance workplace productivity in Design and related industries.
Module Intended Learning Outcomes:
On completion of the module, students are expected to be able to:
1. produce design illustrations using computer applications to meet given requirements;
2. produce computer graphics using editing applications to meet given requirements; and
3. build a website with interactive and multimedia features to meet given requirements.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 80
Learning and Teaching Strategies:
This module will be delivered in a computer laboratory.
Practical examples are given to students to facilitate their learning.
Hands-on and task-based approaches are used to encourage students to attain the practical skills and knowledge.
Exercises and work relevant to the programme are given to students to apply the skills they learn in this module in their vocational modules of the programme.
Assessment Scheme:
Continuous Assessment (CA) 50%
End of Module Assessment (EA) 50%
Total 100%
Key Content Areas: The following Units of Competency (UoCs) from the Specification of Generic (Foundation) Competencies under the Qualifications Framework are adopted as the references for the delivery of the module in order to achieve the intended learning outcomes. UoC#1: GCIT306A Produce a design illustration using computer applications. UoC#2: GCIT307A Produce computer graphics using editing applications. UoC#3: GCIT315A Produce an interactive website to meet user requirements.
Unit of Competency
Elements of Competency
Performance Criteria
GCIT306A Produce a design illustration using computer applications
1. Demonstrate an understanding of the principles of computer applications for producing design illustrations
1.1 Identify functions of a computer application for producing design illustrations that meets user requirements
Range: Topics may include but are not limited to vector graphics, raster images, colour depth, line-width, scaling, rotating, colour filling and layers to assist editing
1.2 Select and justify the use of the computer
application for illustration design when compare with other graphics editing applications
1.3 Identify and select appropriate input techniques to meet user requirements
Range: Techniques may include but are not limited to digitizing tablet, touch screen and track-ball
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 81
2. Plan for producing design illustrations
2.1 Identify and select appropriate steps to create an illustration to meet user requirements
Range: Considerations may include but are not limited to objectives of illustrations, shapes of illustrations, perspective views and 3D views, view angles and drawing size to meet specifications
3. Create a design illustration
3.1 Produce an illustration layout that is consistent with its purposes and familiar to the target audience
3.2 Produce shapes from templates and/or
symbol libraries 3.3 Produce an illustration that meets
communication objectives and user requirements
4. Save and exchange the design illustration
4.1 Store the design illustration in suitable storage media
4.2 Convert the file format of the design
illustration to facilitate storage and information exchange
5. Print and output the design illustration
5.1 Print the design illustration with a suitable hardcopy medium that is familiar to the target audience
5.2 Output the design illustration for other
applications Range: Applications may include but are
not limited to image editing software and web-authoring software
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 82
Unit of Competency
Elements of Competency
Performance Criteria
GCIT307A Produce computer graphics using editing applications
1. Demonstrate an understanding of the principles of graphics editing application
1.1 Identify the functions of a graphics editing application for computer graphics that meets user requirements
1.2 Select and justify the use of the
graphics editing application when compare with other computer aided design (CAD) applications
1.3 Identify and select appropriate input
methods and techniques to meet user requirements
Range: Techniques may include but are not limited to operation of digitizing tablet, pressure sensitive tablet, touch screen and track-ball
2. Plan for producing computer graphics
2.1 Identify and select appropriate steps to create a computer graphics to meet user requirements
Range: Considerations may include but are not limited to expectations from target audience, purposes of visual communications, size of graphics, resolutions, the use of colour, colour tone and style
3. Create a graphic design
3.1 Produce a graphic layout that is consistent with its purpose and familiar to the target audience
Range: Topics may include but are not limited to size, resolution and colour depth
3.2 Open graphics/images for editing Range: Topics may include but are
not limited to multiple files operation, joining, merging, copying, replacing and erasing images
3.3 Use tools to trace and capture image
objects Range: Topics may include but are
not limited to the use of Boolean functions to select, unselect, merge and group image objects
3.4 Apply functions and special effects to
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 83
touch up graphics/images/photographs
Range: Topics may include but are not limited to brightness, contrast, -value, colour tone, colour retouch, shadow, filtering, sharpening and blurring, twisting, filtering, fade-in and fade-out
3.5 Produce a graphic design that meets
the communication objectives and the user requirements
Range: Topics may include but not limited to adopting suitable background colours/ photographs for the design; selecting, adding or removing text, images and photos to the design
4. Save and exchange the graphic design
4.1 Save the graphic design in suitable storage media
4.2 Convert the file format of the graphic
design to facilitate storage and information exchange
5. Print and output the graphic design
5.1 Print the graphic design with a suitable hardcopy medium that is familiar to the target audience
5.2 Output the graphic design for other
applications Range: Applications may include but
are not limited to web authoring applications, slide show and photo thumb nails
5.3 Publish the graphic design in a
suitable medium that is familiar to the target audience
Range: Media may include but are not limited to web pages and websites, CD /DVD
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 84
Unit of Competency
Elements of Competency
Performance Criteria
GCIT315A Produce an interactive website to meet user requirements
1. Demonstrate knowledge and skills in planning an interactive website
1.1 Identify the purpose of the website to meet user requirements
Range: Topics may include but are not limited to target audience, purpose, content and information, constrains and limitations
1.2 Identify and select an appropriate
method to produce an interactive website
Range: Topics may include but are not limited to using HTML or website authoring tools
1.3 Produce sitemap draft to assist
planning of the website Range: Topics may include but are
not limited to the default page, menus, hierarchy, links between web pages, site guides, contact information and FAQ pages
2. Produce an interactive website according to the user requirements
2.1 Use appropriate tools to produce a website with interactive features
Range: Topics may include but are not limited to text formatting, the use of hyperlinks, Cascading Style Sheet, frames, forms and tables; interactive media and typography, hit counter, search functions, on-line product catalogue, membership registration and login
2.2 Insert appropriate graphics, images,
animation and sound from libraries to enhance the website Range: Topics may include but are not limited to the use of colour, background images, animation and background music
3. Manipulate audio in enhancing web pages effectively
3.1 Select, modify or produce digitized audio files to meet the design requirements
Range: Topics may include but are not limited to direct capture, analog and digital conversion, sampling frequency implications
3.2 Adjust and convert audio files to
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 85
appropriate formats Range: Topics may include but are
not limited to mixing, trimming, combining and converting file formats
4. Manipulate video in enhancing web pages effectively
4.1 Select, modify or produce digitized video files to meet the design requirements
Range: Topics may include but are not limited to direct capture by digital video and digital camera, analog and digital conversion, video aspect ratio, video and audio synchronisation, the use of streaming format
4.2 Adjust and convert video files to
appropriate formats Range: Topics may include but are
not limited to trimming, combining, adding transitions, subtitles and narrative
5. Manipulate animation and graphics in enhancing web pages effectively
5.1 Select, modify or produce animated entities with appropriate software to meet the design requirements
5.2 Select, modify or produce graphics
with appropriate software to meet the design requirements
6. Test and maintain the website
6.1 Preview and test the website 6.2 Publish the website by uploading files
to appropriate locations 6.3 Modify and update the website to
meet user requirements
Requirements for Supporting Tools:
Students should have access to a personal computer with appropriate peripherals, internet access and application software.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 86
Textbooks:
In-house learning and teaching materials.
References:
1. Harris, Jack, & Withrow, Steven. (2008). Vector Graphics and Illustration: Master Class in Digital Image-Making. Singapore: Page One.
2. Sinha, Amrendra N., & Udai, Arun D. (2008). Computer Graphics. New Delhi, New York: Tata McGraw-Hill.
3. Bouweraerts, Daniel. (2005). Introduction to Computer Graphics: Design Professional. Boston, Mass. : Thomson Course Technology.
4. Shelly, Gary B., Napier, H. Albert, & Rivers, Ollie. (2010). Discovering the Internet: Complete Concepts and Techniques. Cengage Learning.
5. Bell, Mark R. (2009). Build a Website for Free. Indianapolis, Ind.: Que.
Creation/Revision Record:
Version Date Revised by
1 Feb 2011 LM Li
2 Feb 2013 David Tang
3 Feb 2014 CHUI Wai Chun, Emily
4 Aug 2015 Freddy Wong
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 87
Module Syllabus
Module Title Aesthetics and Semiotics
Module Code DES4008
QF Credits 11
QF Level 4
Notional Learning Hours
110 hrs
Contact Hours*: 39 hrs
Lecture 12 hrs
Tutorial 27 hrs
Workshop/Lab - hrs
Visit/Seminar - hrs
Self-study Hours: 71 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, students are expected to be able to:
1. analyse the characteristics and aesthetic elements through research and evaluation relating to art and design movements;
2. explore design values with an awareness of cultural contexts for effective communication and interpretation;
3. propose and associate design concepts pertinently with visual elements in the context of aesthetics and semiotics; and
4. generate potential design solutions by employing aesthetics and semiotics approaches with respect to cultural diversity and visual literacy.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 88
Learning Contents and Indicative Contact Hours:
Learning Contents
Indicative Contact Hours
1. Aesthetics Theories
Aesthetics theories analysis
Characteristics and aesthetic elements of selected art and design movements
12 hours
2. Representation of Meanings
Semiotics theories analysis
Signifier and the signified
Icon, index and symbol
9 hours
3. Meanings and Interpretations
Ways and styles of meaning
Encoding and decoding of meanings
6 hours
4. Visual application of Aesthetics and Semiotics Theories
Employ aesthetics and semiotics approaches in communication and interpretation
Explore and apply conceptualisation, realisation and presentation skills
9 hours
5. Review and Reflection
Review and evaluate learning outcomes with critical reflection
3 hours
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 89
Mapping of Learning Contents with Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3 4
1 Aesthetics Theories
2 Representation of Meanings
3 Meanings and Interpretations
4 Visual application of Aesthetics and Semiotics Theories
5 Review and Reflection
Learning and Teaching Strategies:
A series of lectures will be structured to introduce the main concepts of aesthetics and semiotics, supplemented by notes, on-line and other reading materials.
The main learning activity will be executed through a range of open and collaborative discussions, presentations and discourses supported by hand-outs, on-line materials and class exercises.
Students will be encouraged to apply the learned skills and knowledge to different modules in the later stage of their studies.
Assessment Scheme:
Continuous Assessment (CA) 40%
End of Module Assessment (EA) 60%
Total 100%
Essential References:
1. Hall, S 2012, This means this, this means that: a user’s guide to semiotics, 2nd edn, Laurence King Pub, London.
2. Faimon, P & Weigand, J 2004, The nature of design: how the principles of design shape our world: from graphic and architecture to interiors and products, How Design Books, Cincinnati.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 90
Further References:
1. Kul-Want, C 2010, Introducing Aesthetics: A Graphic Guide, Totem Books, London.
2. Barry, J 1999, Art, culture, and the semiotics of meaning, St Martin’s Press, New York.
3. Fiedler, J 2012, Bauhaus, H.F, Ullmann Publishing Gmbh, Potsdam.
4. Fahr-Becker, G 2011, Art Nouveau, H.F, Ullmann Publishing Gmbh, Potsdam.
5. Koren, L 2008, Wabi-Sabi: for Artists, Designers, Poets & Philosophers, Imperfect Publishing, Decatur.
6. Kjellman-chapin, M 2013, Kitsch: History, Theory, Practice, Cambridge Scholars Publishing, Newcastle upon Tyne.
7. Jordy, W 2005,"Symbolic Essence" and Other Writings on Modern Architecture and American Culture, Yale University Press, Connecticut.
8. Mitchell, W 2002, Landscape and Power, University of Chicago Press, Chicago.
Creation/Revision Record:
Version Date Created/Revised by
1 Feb 2010 Dr. LAM Yan Yan TAM Ka Fung, Kelvin YAU Wai Man, Raymond
2 Mar 2010 Dr. LAM Yan Yan TAM Ka Fung, Kelvin YAU Wai Man, Raymond
3 Jun 2010 Dr. LAM Yan Yan TAM Ka Fung, Kelvin YAU Wai Man, Raymond
4 Apr 2011 Dr. LAM Yan Yan WONG Man Yee, Eva YAU Wai Man, Raymond
5 Jan 2012 Dr. LAM Yan Yan Tam Ka Fung, Kelvin YAU Wai Man, Raymond
6 Nov 2014 Dr. LAM Yan Yan Tam Ka Fung, Kelvin YUEN Suk Ping YAU Wai Man, Raymond
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 91
Module Syllabus
Module Title Creative and Design Thinking
Module Code DES3006
QF Credits 10
QF Level 3
Notional Learning Hours
100 hrs
Contact Hours*: 39 hrs
Lecture 6 hrs Tutorial 10 hrs Workshop 20 hrs
Visit/Seminar 3 hrs
Self-study Hours: 61 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, students are expected to be able to:
1. differentiate various models, processes, principles, and methods of creative thinking and design thinking;
2. implement human-centred innovation basics to identify needs and define problems under guided scenarios;
3. employ divergent thinking skills to generate ideas; and
4. employ convergent thinking skills to evaluate solutions based on desirability, feasibility, and viability through prototyping and testing.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 92
Learning Contents and Indicative Contact Hours:
Learning Contents Indicative Contact Hours
1. Design Thinking Fundamentals and Practices
Origins and approaches to design thinking
Design thinking principles and process
Practices of design thinking in various industry solutions
3 hours
2. User-Centred Research Basics and Practices
User perception and expectations
Analysis of user experiences from functional and emotional perspectives through journey mapping
6 hours
3. Defining User Needs and Problems
Problem appreciation, definition and framing
6 hours
4. Creative Thinking Approaches and Practices
Creative thinking tools and techniques
(Brain-storming, Clustering and SCAMPER)
Evaluating and selecting innovative solutions
(Evaluation Matrix and Edward De Bono’s Six Thinking Hats)
15 hours
5. Prototype and Concept Presentation
Redefining a problem through prototyping and testing
Concept presentation and evaluation of innovation ideas based on desirability, feasibility, and viability
9 hours
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 93
Mapping of Learning Contents with Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3 4
1 Design Thinking Fundamentals and Practices
2 User-Centred Research Basics and Practices
3 Defining User Needs and Problem
4 Creative Thinking Approach and Practices
5 Prototype and Concept Presentation
Learning and Teaching Strategies:
A series of lectures will be structured to introduce the fundamentals of design thinking and creative thinking tools, supplemented by notes, on-line and other reading materials.
Workshops feature an interactive approach with handouts, group activities and discussions, and student presentations supported by tutorials.
The main learning activity will be executed through a range of exercises, on-site explorations and role-plays.
Students will be encouraged to apply the learned skills and knowledge to different modules in the later stage of their studies.
Assessment Scheme:
Continuous Assessment (CA) 50%
End of Module Assessment (EA) 50%
Total 100%
References:
1. Brown. T. & Wyatt, J. (2010). Design thinking for social innovation, Stanford Social Innovation Review, Winter 2010, 30-35.
2. Curedale, R. (2013). Design Thinking Process and Methods Manual, Design Community College Inc., Topanga, California.
3. Fung, A., Lo, A. & Rao, M.N. (2005). Creative tools, School of Design, Hong Kong Polytechnic University, Hong Kong.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 94
4. Kolko, J. (2014). Well-designed: how to use empathy to create products people love, Harvard Business Review Press.
5. Michalko, M. (2006). Thinkertoys: a handbook of creative-thinking techniques, Ten Speed Press, Berkeley, California.
6. Tomitsch, Martin et al. 2018. Design. Think. Make. Break. Repeat. Amsterdam: BIS.
Creation/Revision Record:
Version Date Created/Revised by
1 Mar 2015 Dr. LAM Yan Yan,
TAM Ka Fung, Kelvin
WONG Man Yee, Eva
LEE Siu Chung, David
2 Apr 2019 WONG Ngai Chi, Edwin
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 95
Module Syllabus
Module Title Cultural Studies
Module Code DES4007
QF Credits 15
QF Level 4
Notional Learning Hours
150 hrs
Contact Hours*: 52 hrs
Lecture 12 hrs Tutorial 32 hrs Workshop/Lab - hrs
Visit/Seminar 8 hrs
Self-study Hours: 98 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, students are expected to be able to:
1. interpret the impact of cultural issues with respect to social, creative and sustainability contexts on arts and design;
2. analyse cultural elements and the important role of cultural values in art and design fields;
3. evaluate the contextual influences of selected major art and design movements on the forms, perceptions and conventions of arts, design and communication; and
4. implement research methods to analyse the relationship between arts, design and culture.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 96
Learning Contents and Indicative Contact Hours:
Learning Contents
Indicative Contact Hours
1. Introduction to Cultural Studies
Social, technological, economical and sustainable perspectives in cultural studies
Important roles of cultural studies to art and design development
4 hours
2. The Social Revolution
Social changes and transformation
Popular culture
Consumerism
Identity
10 hours
3. Globalization vs Localization
Social norms
Creative values
Global and local cultures
Globalisation and cultural sustainability
Community and ‘place-making’
10 hours
4. Oriental and Western Art and Design Movements
Selected art and design movements and the contextual influences
Visual characteristics, the values and nowadays’ transformation in arts and designs
10 hours
5. Research Methods
Field research/ Contextual research methods in various art and design disciplines
Primary and Secondary research
Observation, organisation, interpretation, evaluation and presentation
18 hours
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 97
Mapping of Learning Contents with Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3 4
1 Introduction to Cultural Studies
2 The Social Revolution
3 Globalization vs Localization
4. Oriental and Western Art and Design Movements
5 Research Methods
Learning and Teaching Strategies:
A series of lectures will be structured to introduce the main concepts of cultural awareness and their impact in relation to arts and designs.
The main learning activity will be delivered through a range of open and collaborative discussions, presentations and cultural visits. All activities will be supplemented by hand-outs, on-line and other forms of reading materials.
Students will be encouraged to apply the learned skills and knowledge to different modules in the later stage of their studies.
Cultural research will be employed to establish students’ foundation on identifying important cultural issues and organising the findings.
Assessment Scheme:
Continuous Assessment (CA) 40%
End of Module Assessment (EA) 60%
Total 100%
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 98
Essential References:
1.
2.
Barker, C 2011, Cultural studies: Theory and practice: 4th edition, Sage, London
Pickering, M2008, Research Methods in Cultural Studies (Research Methods for the Arts and the Humanities), Edinburgh University Press, Edinburgh.
Further References:
1. Mirzoeff, N 2009, An introduction to visual culture, Routledge, London; New York
2. 胡恩威 2005, 香港風格 Hong Kong Style, Tom (Cup Magazine) Publishing Limited, Hong Kong
3. Storey, J 2012, An introduction to cultural theory and popular culture, 6th edition, University of Georgia Press, Athens
4. Bhaskaran, L 2009, Designs of the times: using key movements and styles for contemporary design, Page One, Singapore
5. Henri Lefebvre, 2008, The Production of Space, Blackwell Publishing
6. Berger, J 2009, Ways of seeing, British Broadcasting Corporation: Penguin Books, London.
7. 陳瀅巧著, 方孝謙審訂, 2008, 圖解文化研究, 易博士文化, 台北市
Magazines and Periodicals:
1. Cultural studies central, viewed 25 Sept 2008, <http://www.culturalstudies.net>.
2. Mark Harden’s artchive, viewed 25 Sept 2008, <http://www.artchive.com>.
3. International Journal of Cultural Studies, Sage Publications, London.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 99
Creation/Revision Record:
Version Date Created/Revised by
1 Sep 2009 Dr. LAM Yan Yan
WONG Ngai Chi, Edwin
2 Jun 2010 Dr. LAM Yan Yan
WONG Ngai Chi, Edwin
3 Apr 2011 Dr. LAM Yan Yan
MATSUMURA Yoji
WONG Ngai Chi, Edwin
4 Jan 2012 Dr. LAM Yan Yan
Tam Ka Fung, Kelvin
WONG Ngai Chi, Edwin
5. Feb 2015 Dr. LAM Yan Yan
Tam Ka Fung, Kelvin
Leung Po Shan, Popo
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 100
Module Syllabus
Module Title Advanced Fashion Workshop: Draping and Modelling
Module Code FID4225
QF Credits 15
QF Level 4
Notional Learning Hours
150 hrs
Contact Hours*: 65 hrs
Lecture 12 hrs
Tutorial 9 hrs
Workshop/Lab 44 hrs
Visit/Seminar hrs
Self-study Hours: 85 hrs
Assessment Hours: 0 hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, students are expected to be able to:
1. apply advanced techniques and skills in costume construction of garment making;
2. mastery of skills including taking measurements, understanding grainlines, draping a bodice and skirt and translating it into a flat pattern as well as dart manipulation;.
3. manipulate paper pattern correction form model fitting of the garment; and
4. integrate both flat and draped methods of pattern drafting, and advanced construction techniques in the creation of historical Western costumes.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 101
Learning Contents and Indicative Contact Hours:
Learning Contents
Indicative Contact Hours
1. Bodice Sloper (Flat Pattern and Draped Pattern)
To develop a bodice sloper for a selected dress form, using the flat pattern drafting method.
To develop a bodice sloper for the same dress form, using the draping method of pattern drafting.
16 hours
2. Pattern Corrections
Pattern adjustment to correct gathers and picker form a non-fit garment
To manipulate effective correction method to speed up the process
17 hours
3. Dart Manipulation
To creative design details by using dart manipulation.
Using dart as a design details in constructing a costume
6 hours
4. Pattern creation of a historical garment (Paper Pattern and Muslin Mock-up)
To make paper pattern from a specific historical garment by draping and modelling a torso to create fit and cutline
To adjust and to enhance the paper pattern from fabric mock-up into paper pattern form.
26 hours
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents
Intended Learning Outcomes
1 2 3
1 Bodice Sloper (Flat Pattern and Draped Pattern)
2 Pattern Corrections
3 Dart Manipulation
4 Pattern creation of a Historical garment (Paper Pattern and Muslin Mockup)
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 102
Learning and Teaching Strategies:
A series of lectures will be structured to introduce the main concepts advanced garment construction techniques, supplemented by notes, on-line and other reading materials.
At the beginning of each topic, a lecture/demonstration will be given to familiarize the student with the purpose, demands, and techniques required of a project. Students will be encouraged to apply the learned practices and skills by creating a specific historical western costume.
Assessment Plan:
Continuous Assessment (CA) 50%
End of Module Assessment (EA) 50%
Total 100%
Essential References:
1. Waugh, N. and Dolan, J. (n.d.). Corsets and crinolines. London: Routledge.
2. Sparks, L.S., 2009. The basics of corset building: a handbook for beginners1st ed., New York: St. Martins Griffin..
Further References:
1. Arnold, J., 1985. Patterns of fashion 3: The Cut and Construction of Clothes for Men and Women C. 1560-1620, London: drama publishers.
2. Arnold, J., Tiramani, J. & Levey, S.M., 2008. Cut and construction of linen shirts, smocks, neckwear, headwear and accessories for men and women, c. 1540-1660, London: Macmillan.
3. Mikhaila, N. & Malcolm-Davies, J., 2006. The Tudor tailor: reconstructing sixteenth-century dress, London: Batsford.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 103
Creation/Revision Record:
Version Date Created/Revised by
1 Jan 2016 Cheung Chi Yung
2 Feb 2019 Cheung Chi Yung
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 104
Module Syllabus
Module Title Advanced Millinery and Headgear Studio
Module Code FID4204
QF Credits 12
QF Level 4
Notional Learning Hours
120 hrs
Contact Hours*: 52 hrs
Lecture 6 hrs Tutorial 12 hrs
Workshop/Lab 34 hrs
Visit/Seminar - hrs
Self-study Hours: 68 hrs (for full time pre-employment)
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, students are expected to be able to:
1. learn about hat fitting and proportion to design a fascinator that is simple elegance or really conceptual and lends itself to other perfectly;
2. apply various materials, tools and equipment combinations, millinery blocking and shaping techniques in the experimentations complex millinery design;
3. create rigid hat designs with technological considerations and in balance with creativity and functionality;
4. manipulate the construction of rigid hat by using appropriate selection of tools and equipment, materials, trimmings and finishing techniques; and
5. interpret the design process and final outcome in an effective form of presentation.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 105
Learning Contents and Indicative Contact Hours:
Learning Contents
Indicative
Contact Hours
1. Advanced material knowledge of rigid frame top hat design
Surface coverage with textured materials
Super light-weight strong material
Carbon fibre, foam, new technology thermoplastic material
5 hours
2. Analysis of the variables in rigid frame top hat design
Fabric / material sourcing and mock up preparation
Shape supporting material
Assembling agents
8 hours
3. Block and shape millinery components construction techniques
Crown
Brims
Trims
Buckram
Wired frame
Covering, trimming and finishing
Blocked felt hat
29 hours
4. Visualization and presentation skills for millinery design
Presentation techniques including visual and oral communication
Display and decorate on the final top hat for presentation
9 hours
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 106
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents
Intended Learning Outcomes
1 2 3 4
1 Advanced material knowledge of rigid frame top hat design
2 Analysis of the variables in rigid frame top hat design
3 Block and shape millinery components construction techniques
4. Visualization and presentation skills for millinery design
Learning and Teaching Strategies:
5. Students will be introduced to various kinds of headpieces, by evaluating the design techniques, materials and possible end uses, to develop fundamental knowledge.
6. Teaching is student-centred with demonstration, studio practices, tutorial advises and close guidance on idea generations to product development, which involves an experiential and integrative approach to learning, developed by associating design and technological considerations with aesthetics, allowing students to develop problem solving skills.
7. Design studios and workshops with appropriate facilities will be allocated to support learning.
Assessment Scheme:
Continuous Assessment (CA) 60%
End of Module Assessment (EA) 40%
Total 100%
Essential References:
1. Schneider, A., 2014. Hats by Madame Paulette: Paris milliner extraordinaire, London: Thames & Hudson.
2. Mackenzie, A., 2004. Hats and bonnets from Snowshill, National Trust Enterprises., London U.K.: Scala Publishers Ltd.
Further References:
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 107
1. Hagen, C.A., 2005. Fabulous felt hats: dazzling designs from handmade felt, New York: Lark Books.
2. Ginsburg, M., 1990. The hat: trends and traditions, London: Studio Editions.
3. Milbank, C.R., 2002. The Couture Accessory, New York: Abrams.
4. Remiasz, S.V., 1986. Hats, design and construction: hats, design & construction, Evergreen Park, IL: Hat Tree Studio.
5. Tan, H., 2007. Costume craftwork on a budget: clothing, 3-D makeup, wigs, millinery, & accessories, Amsterdam: Focal Press.
Magazines and Periodicals:
1. Insight Colour and Texture Forecast, Kent, Insight, England
2. Peclers Trend Book, Peclers Paris
3. Women’s Wear Daily, Fairchild Publications, New York
Online References 1. www.wgsn.com
Creation/Revision Record:
Version Date Created/Revised by
1 26 Jan 2016 Ho Shui Yi, Georgia
2 15 Apr 2016 WAN Pacino
3 21 Aug 2018 CHEUNG Chi Yung
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 108
Module Syllabus
Module Title Character Costume Design
Module Code FID4197
QF Credits 7
QF Level 4
Notional Learning Hours
70 hrs
Contact Hours*:26 hrs
Lecture 14 hrs
Tutorial 12 hrs
Workshop/Lab - hrs
Visit/Seminar - hrs
Self-study Hours: 44 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes: On completion of the module, students are expected to be able to:
1. visualize characters from the story script through in-depth research and image creation methodology;
2. identify historical costume details through garment construction, fabrication, colour, accessory, make-up and hairstyle;
3. propose and associate design concepts and ideas with costume renderings to create a specific costume design; and
4. generate potential design solutions for presentation to meet the industrial standard.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 109
Learning Contents and Indicative Contact Hours:
Learning Contents
Indicative Contact Hours
1. In-depth study of character and story script analysis
Character analysis through a script and music for a drama and dance piece
Image creation to reflect the personality through costume, make-up, hairstyle and accessory.
4 hours
2. Historical costume realisation
Distinguish the characteristics of period costumes from its shape, texture, fabrication and colour .
Adaptation of historical costume in modern costume design
Style and characteristics of dance costume
6 hours
3. Costume design methodology - Part I
Steps in discovering, revealing and refining approach to the story script
Analyze how a character is create
Apply appropriate drawing style and technique of a costume creation
Knowledge of drawing production sketch to meet the industry standard
8 hours
4. Costume design methodology - Part II
Principle of costume design
Skills in using suitable material and fabric to create a specific costume
Manipulate colour and texture
Collaboration with accessories, make-up and hairstyle
Planning and presentation of the design outcome
8 hours
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 110
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3 4
1 In-depth study of character and script analysis
2 Historical costume realisation
3 Costume design methodology- Part I
4 Costume design methodology- Part II
Learning and Teaching Strategies:
A series of lectures will be structured to introduce the design methodology of costume design, text and character analysis supplemented by notes, ppt and other reading materials.
The main learning activity will be executed through a range of open collaborative discussions, tutorial, presentations and discourses supported by visual materials, music, and self-reflective journal.
Students will be encouraged to apply the learned practices and skills across different modules e.g. cultural studies, and creative thinking.
Assessment Plan:
Continuous Assessment (CA) 50%
End of Module Assessment (EA) 50%
Total 100%
Essential References: 1. Ingham, R., 1992. The costume designers handbook: a complete guide for amateur and
professional costume designers 2nd Revised ed. edition., Longman.
2. Blumenthal, E., Taymor, J. & Monda, A., 2007. Julie Taymor: playing with fire: theater, opera, film, Abrams, NY: Abrams.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 111
Online References:
1. http://www.robertwilson.com/la-traviata-cover
2. http://www.cloudgate.org.tw/
3. http://www.metopera.org/
4. http://www.roh.org.uk/about/the-royal-ballet
Further References: 1. Jorgensen, J. & Scoggins, D.L., 2015. Creating the illusion: a fashionable history of
Hollywood costume designers, Philadelphia: Running Press.
2. Landis, D.N. & Landis, D.N., 2012. Costume design, Lewes: Ilex.
3. Jorgensen, J. & Powell, S., 2010. Edith Head: the fifty-year career of Hollywoods greatest costume designer, Philadelphia: Running Press.
4. Victorian and Edwardian Fashion: A Photographic Survey
5. Landis, D.N., 2011. Dressed: a Century of Hollywood Costume Design, Harpercollins.
6. Cunnington, c. willett, 2007. History of underclothes, New york: Dover.
7. Fukai, A. & Thompson, P.W., 2006. Fashion in colors, Paris: Assouline.
8. Behr, E. & Schonberg Claude-Michel, 2016. The complete book of Les miserables, New York: Arcade Publishing.
9. Anon, 2010. 100 dresses the Costume Institute, The Metropolitan Museum of Art, New Haven: Metropolitan Museum of Art.
10. Rubenstein, H., 2011. 100 unforgettable dresses, New York: Harper Design.
Creation/Revision Record:
Version Date Created/Revised by
1 26 Jan.2016 Tam Ka Yee, Mandy
2 15 Apr 2016 WAN Pacino
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 112
Module Syllabus
Module Title Collaboration Project
Module Code FID4200
QF Credits 7
QF Level 4
Notional Learning Hours
70 hrs
Contact Hours*: 26 hrs
Lecture 4 hrs
Tutorial 4 hrs
Workshop/Lab 18 hrs
Visit/Seminar - hrs
Self-study Hours: 44 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, students are expected to be able to:
1. apply learned knowledge and professional/technical skills of costume design to practices in a real industry or a simulated situation;
2. plan and execute costume design projects with the collaboration of a team; and
3. integrate the advanced skills in costume design and production that employ and recognize of the realistic aspects of the work in the professional area.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 113
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents
Indicative Contact Hours
1. Visual analysis and Synthesis
Theme formation & context research in respond to a project brief
Ideas development with consideration of the situation & different methodologies
Research on costume styles and lifestyle of a selected situation
2 hours
2. Work-based Learning
Self-initiated team building including photographer, fashion stylist, make-up artist & hair stylist.
Collaborative work through appropriate communication and planning within the team
Skill development through experiment, studio or location shoot
9 hours
3. Professional Studies
Inspirational theme development
Colour Palette and Mood Board
Selection of appropriate products
Costume design and techniques: special effects on textures and propos etc.
Technical application and development
Technological advancement in product knowledge
15 hours
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3
1 Visual analysis and Synthesis
2 Work Based Learning
3 Professional Studies
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 114
Learning and Teaching Strategies:
Learning and teaching will be conducted interactively in a range of formats including structured lectures, workshop practice, projects, tutorials, and presentations.
Lectures feature an interactive approach with presentations and handouts which relate to student-oriented objectives and include recommended reading lists.
Assessment Scheme:
Continuous Assessment (CA) 50%
End of Module Assessment (EA) 50%
Total 100%
References:
1. Eisenman, S., 2008. Building design portfolios: innovative concepts for presenting your work, Gloucester, MA: Rockport..
2. Tortora, P.G., Marcketti, S.B. & Tortora, P.G., 2015. Survey of historic costume: student study guide, New York: Fairchild Books.
3. Zhou, X. & Gao, C., 1984. 5000 years of Chinese costumes, Hong Kong: Commercial Press.
Creation/Revision Record:
Version Date Revised by
1 20 Jan 2016 Shaun Cheung
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 115
Module Syllabus
Module Title Costume Construction
Module Code FID3077
QF Credits 10
QF Level 3
Notional Learning Hours
100 hrs
Contact Hours*: 52 hrs
Lecture 6 hrs Tutorial 9 hrs
Workshop/Lab 37 hrs
Visit/Seminar - hrs
Self-study Hours: 48 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, students are expected to be able to:
1. interpret various approaches to garment making handicraft and professional
terminology;
2. manipulate the use of commercial patterns, minor pattern adjustment, and
professional construction techniques to produce different garment parts; and
3. analyse costume construction techniques in the creation of a design solution.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 116
Learning Contents and Indicative Contact Hours:
Learning Contents
Indicative Contact Hours
1. Introduction of Sewing equipment, fabric and patterns
Introduction of different sewing machines and equipment
Textile and fabric
Basic knowledge of patterns
6 hours
2. Pattern construction
Introduction to pattern cutting techniques
Equipment for pattern cutting
Basic block construction
Pattern adjustment
Pattern sizing
Pattern adaptation for various styles: pleats, panels, yoke and gathers
Basic block construction of blouses and blouse sleeves
12 hours
3. Basic sewing techniques
Usage of different type of sewing machines and sergers
Sewing darts, patch pockets, zippers and facing etc.
12 hours
4. Hand sewing technique
Different types of hand stitching
6 hours
5. Sewing process of a simple costume
Seam type & stitching type and the application
Basic techniques of garment assembly
Assembly of a garment using appropriate production processes
6 hours
6. Produce a costume sample
Pattern drafting techniques to translate a design idea into a finished pattern
Assembly of a costume sample using appropriate production process
Operation breakdown / flow chart and size specification for skirt
10 hours
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 117
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3
1 Introduction of Sewing equipment, fabric and patterns
2 Pattern construction
3 Basic sewing techniques
4 Hand sewing technique
5 Sewing process of a simple costume
6 Produce a costume sample
Learning and Teaching Strategies:
Learning and teaching will be delivered interactively in a range of formats including structured lecturers, workshops, demonstrations, projects, tutorials, and presentations.
A series of lectures will be structured to introduce the main concepts of aesthetics and semiotics, supplemented by notes, on-line and other reading materials.
At the beginning of each topic, a lecture/demonstration will be given to familiarize the student with the purpose, demands, and techniques required of a project. Students will be encouraged to apply the learned practices and skills hands-on practice in workshop provided with professional equipment.
Assessment Scheme:
Continuous Assessment (CA) 50%
End-of-Module Assessment (EA) 50%
Total 100%
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 118
References:
1. Ingham, R. & Covey, L., 2003. The costume technicians handbook, Portsmouth, NH: Heinemann.
2. Basic Sewing for Costume Construction: A Handbook
Further References:
1. Strand-Evans, K., 2015. Costume construction, Long Grove, IL: Waveland Press, Inc.
2. Fernald, M., 2006. Historic costumes and how to make them, Mineola, NY: Dover Publications, Inc.
3. Baumgarten, L., 1998. Costume close up: clothing construction and pattern .., United States.
Creation/Revision Record:
Version Date Created/Revised by
1 1 Feb 2016 CHEUNG Chi Yung
2 15 Apr 2016 WAN Pacino
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 119
Module Syllabus
Module Title Costume Drawings
Module Code FID3070
QF Credits 7
QF Level 3
Notional Learning Hours
70 hrs
Contact Hours*: 39 hrs
Lecture 12 hrs Tutorial 6 hrs
Workshop/Lab 21 hrs
Visit/Seminar - hrs
Self-study Hours: 31 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, students are expected to be able to:
1. draw the basic body figures, face features, hairstyles in different postures;
2. visualize the historical and theoretical significance of periodic costumes by drawings;
3. integrate the techniques of rendering and colouring of various fabric textures with prints and motifs to visualise design details; and
4. present the costume designs by production drawing technique in a professional manner and layout design.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 120
Learning Contents and Indicative Contact Hours:
Learning Contents
Indicative Contact Hours
1. Introduction to Periodic Costumes Characteristics
Exploration and appreciation of the periodic costumes of both European and Chinese History in terms of costumes structure, forms and silhouette
3 hours
2. Rendering and colouring fabric textures
Techniques of rendering and colouring various fabric textures and design details in different media such as colour pencils, watercolours, markers, etc.
9 hours
3. Costume Drawings
Human figures in various poses
Face features and hair styling/ headgears
Colouring the costumes design for presentation
18 hours
4. Presentation Technique
Layout and touch up of final presentation
Production Drawings
9 hours
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3 4
1 Introduction to Periodic Costumes Characteristics
2 Rendering and Colouring Fabric Textures
3 Costume Drawings
4 Presentation Technique
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 121
Learning and Teaching Strategies:
The module is conducted through a combination of demonstration, lectures, practical exercises and projects to provide students with practical experience in costume drawing. Structured projects are supported by tutorials and group discussions.
The module also fosters students’ techniques in costume drawing and presentation methods. A student-centered learning is employed to cultivate students’ effective presentation skills.
Assessment Plan:
Continuous Assessment (CA) 50%
End of Module Assessment (EA) 50%
Total 100%
Essential References:
1. Goldstein, N., 2011. Figure drawing: the structure, anatomy, and expressive design of human form, Upper Saddle River, NJ: Pearson/Prentice Hall.
2. Albert, G., 1994. Basic figure drawing techniques, Cincinnati, OH: North Light Books.
Further References:
1. Tortora, P. & Eubank, K., 2015. Survey of historic costume, New York: Fairchild Books, an inprint of Bloomsbury Publishing.
2. Zhou, X. & Gao, C., 1984. 5000 years of Chinese costumes, Hong Kong: Commercial Press.
Creation/Revision Record:
Version Date Created/Revised by
1 Jan 2016 Cassidy Dung
2 15 Apr 2016 WAN Pacino
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 122
Module Syllabus
Module Title Costume History and Evolution
Module Code FID3073
QF Credits 10
QF Level 3
Notional Learning Hours
100 hrs
Contact Hours*: 39 hrs
Lecture 20 hrs Tutorial 9 hrs
Workshop/Lab 10 hrs
Visit/Seminar - hrs
Self-study Hours: 61 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, students are expected to be able to:
1. identify different forms of historical clothing from both European and Chinese culture and distinguish their proper terminologies;
2. analyse the fundamental factors that affect the evolution of costume;
3. compare the costumes of different historical eras and relate them to the social, political and economic climates of those eras; and
4. manipulate design elements such as line, form, colour, materials, patterns, hair and makeup, accessories to create a historically inspired costume.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 123
Learning Contents and Indicative Contact Hours:
Learning Contents
Indicative Contact Hours
1. Common Themes in Costume History Across Time
Social Context
Historical Context
Cross-Cultural Context
3 hours
3. Civilizations of the Ancient World
Understanding the costume characteristics and developments from The Ancient Middle East, Greece to Rome period
6 hours
3. The Evolution of Costume in European Countries
The Middle Ages
The Renaissance
Baroque and Rococo
The Nineteenth Century
15 hours
4. The Evolution of Costume in Ancient China
Pre- Han Dynasty
Han, Wei, Jin, The Southern and Northern Dynasties, Tang, Song, Yuan, Ming and Qing Dynasties
15 hours
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents
Intended Learning Outcomes
1 2 3 4
1 Common Themes in Costume History Across Time
2 Civilizations of the Ancient World
3 The Evolution of Costume in European Countries
4 The Evolution of Costume in Ancient China
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 124
Learning and Teaching Strategies:
The module is conducted through a combination of demonstration, lectures, practical exercises and projects.
Real garment samples from the Fashion Archive are used to demonstrate the period costumes from different eras to the students.
The module also fosters students’ techniques in costume making and presentation methods. A student-centered learning is employed to cultivate students’ effective presentation skills.
Assessment Plan:
Continuous Assessment (CA) 50%
End of Module Assessment (EA) 50%
Total 100%
References:
1. Tortora, P. & Eubank, K., 2015. Survey of historic costume, New York: Fairchild Books, an inprint of Bloomsbury Publishing.
2. Zhou, X. & Gao, C., 1984. 5000 years of Chinese costumes, Hong Kong: Commercial Press.
Creation/Revision Record:
Version Date Created/Revised by
1 Jan 2016 Cassidy Dung
2 Apr 2016 WAN Pacino
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 125
Module Syllabus
Module Title Costume Technology
Module Code FID4205
QF Credits 12
QF Level 4
Notional Learning Hours
120 hrs
Contact Hours*: 52 hrs
Lecture 6 hrs Tutorial 9 hrs
Workshop/Lab 37 hrs
Visit/Seminar - hrs
Self-study Hours: 68 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, students are expected to be able to:
1. evaluate different pattern alterations and fitting technique which used in the costume
industry;
2. apply appropriate pattern drafting techniques to translate a complex costume design or
idea into paper patterns;
3. construct garment mock-up for idea presentation in meeting the industrial requirements;
and
4. manipulate a set of sample realisation specifications for a selected costume item in
meeting industrial standard.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 126
Learning Contents and Indicative Contact Hours:
Learning Contents
Indicative Curriculum Hours
1. Pattern design and interpretation for various types of pattern
Pattern adaptation and style for various types of pattern
by flat pattern method: dart manipulation
by modelling
Pattern adaptation for various styles of collars
Pattern adaption for various styles of sleeves
Block construct for period costume
12 hours
2. Costume making techniques
Sewing of costume parts such as pockets, zip-fly, opening, facing etc.
9 hours
3. Prototype sampling technique
Construct pattern for the mock-ups
Transfer working drawings to produce accurate patterns and finished garments that reflect the original design idea.
Appropriate sewing techniques for the production of a selected style
Use of appropriate costume making processes to assemble a complex outfits.
19 hours
4. Fitting and alteration
To conduct a fitting
Costume alternation methods
6 hours
5. Knowledge of unique fabrics, linings and shaping
materials
Distinguish the contents, construction, handfeel and application of a variety of fabrics and materials.
6 hours
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 127
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents Module Intended Learning outcome
1 2 3 4
1 Pattern design and interpretation for various types of pattern
2 Costume making techniques
3 Fitting and alteration
4 Knowledge of unique fabrics, linings and shaping materials
Learning and Teaching Strategies:
Learning and teaching will be delivered interactively in a range of formats including structured lecturers, workshops, demonstrations, projects, tutorials, and presentations.
A series of lectures will be structured to introduce the main concepts of garment construction and paper pattern drafting technique, supplemented by notes, on-line and other reading materials.
Assessment Scheme:
Continuous Assessment (CA) 50%
End-of-Module Assessment (EA) 50%
Total 100%
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 128
References:
1. Aldrich, W 2008, Metric Pattern Cutting, S" ed. Blackwell Scientific Publication
2. Bray, N 2003, Dress Fitting: Basic Principles and Practice, 1" ed. Blackwell Publishing.
3. Tomoko, N 2011, Pattern magic 2-HB, Laurence King Publishing
4. Baumgarten, L., 1986. Eighteenth-century clothing at Williamsburg, Williamsburg, VA: Colonial Williamsburg Foundation.
Further Reference:
1. Strand-Evans, K., 2015. Costume construction, Long Grove, IL: Waveland Press, Inc..
2. Fernald, M., 2006. Historic costumes and how to make them, Mineola, NY: Dover Publications, Inc.
3. Baumgarten, L., 1998. Costume close up: clothing construction and pattern .., United States.
4. Hart, A., 2009. Seventeenth And Eighteenth-Century Fashion In Detail The 17Th And 18Th Centuries, Hachette Book Group.
Creation/Revision Record:
Version Date Created/Revised by
1 21 Feb 2016 CHEUNG Chi Yung
2 15 Apr 2016 WAN Pacino
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 129
Module Syllabus
Module Title Critical Practice for Costume Design
Module Code FID4202
QF Credits 7
QF Level 4
Notional Learning Hours
70 hrs
Contact Hours*: 26 hrs
Lecture 8 hrs
Tutorial 15 hrs
Workshop/Lab - hrs
Visit/Seminar 3 hrs
Self-study Hours: 44 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, students are expected to be able to:
1. apply appropriate intellectual skills of analysis, synthesis and evaluation for higher level
of study in costume design and production areas;
2. identify and analyse the issues of fashion styling, hair and make-up designs for
developing a new area of design concept;
3. analyse the potential problem in different areas of costume design and developing new
concept of costume design and develop strategies to solve critical problem; and
4. review and reflect on individual’s work to identify areas for self-development.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 130
Learning Contents and Indicative Curriculum Hours:
Learning Contents Indicative Curriculum Hours
1. Commentary Research Methodologies
Research methods and procedures
Sourcing information
Reflective Statement
4 hours
2. Formulate Evidence-based Response
Monitoring self-assessment & development
Visual research journal
13 hours
3. Synthesis and Application of ideas
Evaluation for idea generation
Approaches to independent learning
Application of critique
An illustrated report, extended essay or case studies
9 hours
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3 4
1 Commentary Research Methodologies
2 Formulate Evidence-based Response
3 Synthesis and Application of ideas
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 131
Learning and Teaching Strategies:
Learning and teaching will be delivered interactively in a range of formats including structured lecturers, visits, projects, tutorials, and presentations.
Lectures feature an interactive approach with presentation and supporting materials which relate to student oriented objectives and include recommended reading lists. The emphasis of the module is on developing students’ analytical and cognitive skills.
External professional participation, where appropriate, will help position the acquired knowledge in a real life context.
Integration with other modules, such as design projects, will be encouraged in order that students may apply learned practices and concepts across modules.
Assessment Scheme:
Continuous Assessment (CA) 50%
End of Module Assessment (EA) 50%
Total 100%
References
1. Inns, T., 2010. Designing for the 21st century, Farnham: Gower.
2. Grear, M., 2006. Inside/outside: from the basics to the practice of design, Berkeley, CA: New Riders.
3. Lee, A.Y. & Soman, D., 2008. Advances in consumer research, Duluth, MN: Association for Consumer Research.
4.
5.
Doing Research in Cultural Studies: an introduction to classical and new methodological approaches Walker, S., 2007. Sustainable by design: explorations in theory and practice, London: Earthscan.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 132
Magazines and Periodicals:
1. Collezioni, Logos Publishing Srl.
2. Inside Fashion
3. Peclers Trend Book
4. Textile Asia
5. Vogue, Conde Nast Publications
Online References
1. <www.firstview.com>
2. <www.stylesight.com>
3. <www.wgsn.com>
Creation/Revision Record:
Version Date Created/Revised by
1 22 Jan 2016 Shaun CHEUNG
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 133
Module Syllabus
Module Title Fashion Plus: Industry Processes
Module Code FID4037
QF Credits 12
QF Level 4
Notional Learning Hours
120 hrs
Contact Hours*: 52 hrs
Lecture 4 hrs
Tutorial 4 hrs
Workshop/Lab/Practice 40 hrs
Visit/Seminar 4 hrs
Self-study Hours: 68 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On successful completion of the module, students are expected to be able to:
1. explain the interplay of components, considerations, trend and development for the
Costume Design industry processes related to the stream specific studies;
2. plan and execute R&D and production processes in the context of the industry
practice; and
3. select with justification the appropriate materials/media for specific industry
processes.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 134
Learning Contents and Indicative Curriculum Hours:
Learning Contents Indicative Contact Hours
1. Understanding of Industry Processes
Interplay of components: such as processes, materials/ media, technologies, human resources
Factors for considerations: such as efficiency, costs, environmental impact
Trend and development
8 hours
2. Practice of Industry Processes
R&D processes
Production processes
28 hours
3. Materials/Media Exploration for Industry Processes
Properties, performance and limitations
Application and selection for specific processes
12 hours
4. Evaluation and Reflection
Evaluation and reflection of the exploration and practices
4 hours
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3
1 Understanding of Industry Processes
2 Practice of Industry Processes
3 Materials/Media Exploration for Industry Processes
4 Evaluation and Reflection
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 135
Learning and Teaching Strategies:
Students will be briefed about and guided through the exploration processes and practices. A reflective report with record and evaluation of the learning processes and learning outcomes may be submitted/ presented at the end of the module.
Learning and teaching will mainly be delivered in learning-by-doing formats, such as practices, visits to industry sites / labs / exhibitions, experimentation, investigation, and review. Students are given the opportunities to strengthen industry related skills through the hands-on exploration/practices.
A hands-on and student-centred approach provides practical opportunities for students to integrate and apply learned (from previous and current modules) knowledge and skills, and develop their initiative and self learning abilities along their own interests and strengths, in achieving the intended scope of outcomes and standard. Students will be required to execute the assignments/projects independently with appropriate guidance and support.
Group reviews and self-assessment encourage peer group learning and self reflection.
The assignment/assessment activities may be integrated with related modules in the programme/stream specific context where appropriate.
Assessment Scheme:
Continuous Assessment (CA) 60%
End of Module Assessment (EA) 40%
Total 100%
Grade:
This module is to be assessed on a pass/fail basis:
Pass (P): 40-100% Fail (F): below 40%
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 136
References:
1. Braisdell, L 2011, The Hair and Make-up Artist’s Handbook, Hodder Education, London.
2. Davis, H 2012, The Make-up Artist Handbook, Focal Press, UK
3. Barrett, J C 2013, Designing your fashion portfolio: From concept to presentation, Fairchild Publications, New York.
4. Janda, M 2014, Anatomy of a Design Proposal, Peachpit Press, Califonia, U.S.
5. Kiper, A 2016, Fashion Portfolio: Design and Presentation. Pavilion Books, London, U.K.
6. Reynolds, G 2013, Presentation Zen Design: Simple Design Principles and Techniques to Enhance Your Presentations, 2nd edn, New Riders, U.S.
7. Volpintesta, L 2014, The language of fashion design: 26 principles every fashion designer should know, Rockport Publishers, U.S.
Online References:
1. <www.pinterest.com>
2. <www.wgsn.com>
3. <http://nymag.com>
4. <http://www.nytimes.com/section/t-magazine>
5. <http://www.vogue.co.uk>
Creation/Revision Record:
Version Date Created/Revised by
1 Mar 2016 CHAN Sau Lin, Circula
2 Nov 2018 Shaun SP Cheung
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 137
Module Syllabus
Module Title Fundamental Costume Design
Module Code FID4193
QF Credits 7
QF Level 4
Notional Learning Hours
70 hrs
Contact Hours*:26 hrs
Lecture 18 hrs
Tutorial 8 hrs
Workshop/Lab - hrs
Visit/Seminar - hrs
Self-study Hours: 44 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, students are expected to be able to:
1. identify appropriate costumes for different entertainment art such as TV, movies, music concert, dance and drama;
2. analyse a costume design in terms of text and appearance;
3. propose and associate design concepts with costume drawing visual elements in the context of aesthetics and semiotics; and
4. apply the skills of colour, texture, fabrics and materials in the creation of a costume design solution.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 138
Learning Contents and Indicative Contact Hours:
Learning Contents
Indicative Contact Hours
1. Introduction to costume
Definition of costume and costume design
Stage, film, TV, advertising, concert as entertainment art
4 hours
2. Introduction to different art form of costume design
Understanding different style of the costume e.g. realistic, surrealist, naturalistic
Characteristics of period, modern and contemporary costumes
4 hours
3. Costume design - Part I
Text and Character analysis
Research for the text and character from different media according to the text
Research and understanding the fabrics and materials
8 hours
4. Costume design - Part II
Elements of costume design, apply skills in color, proportion, design details according to the character and style
Costume drawing with fabric samples and production sketch
Planning and presentation of the costume design
8 hours
5. Verbal presentation and reflection 2 hours
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 139
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3 4
1 Introduction to costume
2 Introduction to different art form of costume design
3 Costume design - Part I
4 Costume design - Part II
5 Verbal presentation and reflection
Learning and Teaching Strategies:
A series of lectures will be structured to introduce the style and art form of costume design, supplemented by notes, ppt and other reading materials.
Real garment collectables from the Fashion Archive can demonstrate different period costume details to the students.
Real garment collectables from the Fashion Archive can demonstrate different period costume details to the students.
Assessment Plan:
Continuous Assessment (CA) 50%
End of Module Assessment (EA) 50%
Total 100%
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 140
Essential References:
1. Bowles, H. et al., 2014. Vogue & the Metropolitan Museum of Art Costume Institute: parties, exhibitions, people, New York: Abrams.
2. Ingham, R., 1992. The costume designers handbook: a complete guide for amateur and professional costume designers, Longman.
3. Tan, H., 2018. Character costume figure drawing: step-by-step drawing methods for theatre costume designers, New York, NY: Routledge, Taylor & Francis Group.
4. Blumenthal, E., Taymor, J. & Monda, A., 2007. Julie Taymor: playing with fire: theater, opera, film, Abrams, NY: Abrams.
5. Pecktal, L., 1999. Costume design: techniques of modern masters, New York: Back Stage Books.
Further References: 1. Jorgensen, J. & Scoggins, D.L., 2015. Creating the illusion: a fashionable history of
Hollywood costume designers, Philadelphia: Running Press.
2. Landis, D.N. & Landis, D.N., 2012. Costume design, Lewes: Ilex.
3. Jorgensen, J. & Powell, S., 2010. Edith Head: the fifty-year career of Hollywoods greatest costume designer, Philadelphia: Running Press.
4. Victorian and Edwardian Fashion: A Photographic Survey
5. Landis, D.N., 2011. Dressed: a Century of Hollywood Costume Design, Harpercollins.
6. Cunnington, c. willett, 2007. History of underclothes, New york: Dover.
7. Fukai, A. & Thompson, P.W., 2006. Fashion in colors, Paris: Assouline.
8. Behr, E. & Schonberg Claude-Michel, 2016. The complete book of Les miserables, New York: Arcade Publishing.
9. Anon, 2010. 100 dresses the Costume Institute, The Metropolitan Museum of Art, New Haven: Metropolitan Museum of Art.
10. Rubenstein, H., 2011. 100 unforgettable dresses, New York: Harper Design.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 141
Creation/Revision Record:
Version Date Created/Revised by
1 26 Jan 2016 Tam Ka Yee, Mandy
2 15 Apr 2016 WAN Pacino
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 142
Module Syllabus
Module Title Introduction to Stage Hair Design
Module Code FID3075
QF Credits 7
QF Level 3
Notional Learning Hours
70 hrs
Contact Hours*: 39 hrs
Lecture 10 hrs
Tutorial 4 hrs
Workshop/Lab 25 hrs
Visit/Seminar - hrs
Self-study Hours: 31 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, learners are expected to be able to:
1. analyze historical hairstyles from ancient to modern times for modern performance
interpretation;
2. evaluate the evolution of beauty from ancient to modern civilizations and its influence
to contemporary hairstyles trend and;
3. create historical hairstyles through the use of modern products and styling techniques.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 143
Learning Contents and Indicative Contact Hours:
Learning Contents
Indicative
Contact Hours
1. Research Studies
Historical overview of hairstyles in Western and Eastern cultures
Identify and analyse cultural and social significance in hair trends throughout history
Application of historical knowledge in trend forecasting
Observation studies of relevant historical paintings, photography, cinema and other visual references
4 hours
2. Design Development
Evaluate historical influences in contemporary designs
Ability to design and develop contemporary hairstyles with periodic elements
Progression of head chart drawings and visualisation of hair designs
10 hours
3. Technical Studies & Workshop Practice
Identify and apply traditional versus modern hair styling and dressing techniques
Ability to use modern styling techniques to achieve a period hairstyle
Ability to use appropriate tools, common terminologies and application techniques
Explore quick change techniques to simulate actual theatre environment
25 hours
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3
1 Research Studies
2 Design Development
3 Technical Studies & Workshop Practice
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 144
Learning and Teaching Strategies:
The module is conducted through a combination of lectures, tutorials, critiques, studio and workshop practices to equip students with knowledge and skills required in the process of historical hair dressing.
In a student-centred, problem-based learning approach, learners will work on projects to further strengthen their analytical and problem solving skills.
Assessment Scheme:
Continuous Assessment (CA) 50%
End-of-Module Assessment (EA) 50%
Total 100%
References:
1. Bryer, R 2003, The History of Hair: Fashion and Fantasy Down the Ages, Philip Wilson
Publishers, London.
2. Corson, R 2005, Fashion in Hair: The First Five Thousand Years, Peter Owen,
London.
3. Sherrow, V 2006, Encyclopedia of Hair: A Cultural History, Greenwood, Westport,
Conn.
Creation/Revision Record:
Version Date Revised by
1 25 Nov 2014 Cecilia Pritchard
2 15 Apr 2016 Wan Pacino
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 145
Module Syllabus
Module Title Introduction to Stage Make-up
Module Code FID4227
QF Credits 7
QF Level 3
Notional Learning Hours
70 hrs
Contact Hours*: 52 hrs
Lecture 13 hrs
Tutorial 12 hrs
Workshop/Lab 27 hrs
Visit/Seminar - hrs
Self-study Hours: 48 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, learners are expected to be able to:
1. apply conventional make-up techniques to create further characterisation for stage;
2. integrate ideas for character make-up with the knowledge of facial anatomical, form,
contour, light and shadow;
3. analyze medical and visual information of skin conditions, colouration and trauma for
creating successful character make-up; and
4. create 3-Dimensional make-up design through the use of special materials.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 146
Learning Contents and Indicative Contact Hours:
Learning Contents Indicative
Contact Hours
1. Character Research
Introduction to Human Anatomy
Facial bone structure, muscle movement and skin behaviour
Theatre references
7 hours
2. Colour Constitution
Skin tone deconstruction and textural effects Layering techniques to build up intensity
Technological references
3 hours
3. Technical Studies
Specialist products knowledge, usage and safe removal
Development of methodologies
Professional health and safety considerations
36 hours
4. Character Studies
Reality versus fantasy characters
Accident and emergency techniques
Blocking out eyebrow and facial hair effects
6 hours
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3 4
1 Character Research
2 Colour Constitution
3 Technical Studies
4 Character Studies
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 147
Learning and Teaching Strategies:
The module is conducted through a combination of lectures, tutorials, critiques and studio practices to equip students with knowledge and skills required in the character make-up process.
In a student-centred, problem-based learning approach, learners will work on projects to further strengthen their analytical and problem solving skills.
Assessment Scheme:
Continuous Assessment (CA) 50%
End-of-Module Assessment (EA) 50%
Total 100%
References:
1. Corson, R 2009, Stage Make-up, Pearson, London.
2. Thompson, P 2008, Character Make-up, USITT, 2nd Ed, US
3. Bayan, L. 1994, Make-up for Theatre, Film and Television; a step-by-step photographic guide, A&CBlack (Publisher) Limited
4. Boardman, J. 1985, Greek Sculpture: A Handbook; The Classical Period, Thames and Hudson, London.
5. Dix, J 1999, Color Atlas of Forensic Pathology, CRC Press, New York
6. Wagner, S 2003, Color Atlas of The Autopsy, CRC Press, New York
Creation/Revision Record:
Version Date Revised by
1 26 Jan 2016 Victor J. Tong
2 15 Apr 2016 Wan Pacino
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 148
Module Syllabus
Module Title Materials for Stage Performance
Module Code FID3074
QF Credits 6
QF Level 3
Notional Learning Hours
60 hrs
Contact Hours*: 26 hrs
Lecture 6 hrs Tutorial 4 hrs
Workshop/Lab 16 hrs
Visit/Seminar - hrs
Self-study Hours: 34 hrs (for full time pre-employment)
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, students are expected to be able to:
1. compare properties of various types of textile fibre, yarns and fabrics with costume; 2. analyse textile structures, properties and end-uses of various types of fashion materials
from their appearance, hand feel and simple testing method;
3. create fabric samples in using dyeing, printing, bleaching, brushing and washing techniques from a given theme for a costume; and
4. coordinate textile designs through relevant visual, verbal and written skills.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 149
Learning Contents and Indicative Contact Hours:
Learning Contents
Indicative
Contact Hours
1. Basic Textile Technology
Technical terminology in different textiles construction, content and finishing.
Classification and characteristics of textile materials both woven fabric, knit fabric and non-woven fabric.
Identify fabric content from its appearance, outlook and a simple testing method.
6 hours
2. Textile Design Techniques
Surface design experiments on different fabric and material combination according to their yarn construction.
Difference in construction and function between knitted fabric, woven fabric and non-woven fabric.
Natural fibre, regenerated fibre and synthetic fibre
10 hours
3. Coloration Design Techniques
Experimenting natural dyeing and printing techniques
Distressing/ aging effect process by hand brush, washing and adding erosive agent on it
8 hours
4. Presentation Skills
Coordinate the testing outcome in a creative way including visual and oral communication
2 hours
Mapping of Learning Contents with Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3 4
1 Basic Textile Technology
2 Textile Design Techniques
3 Coloration Design Techniques
4. Presentation Skills
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 150
Learning and Teaching Strategies:
Learning and teaching will be delivered interactively in a range of formats including structured lecturers, laboratory, demonstration, projects, tutorials, and presentations.
Lectures feature an interactive approach with presentation and handouts which relate to student oriented objectives and include hands-on exercise and dying and printing experiment.
Assessment Scheme:
Continuous Assessment (CA) 60%
End of Module Assessment (EA) 40%
Total 100%
Essential References:
1. Bradford, 2007,New developments in textiles, clothing and design, Emerald Group Press
2. Fogg, M 2006, Print in Fashion: Design, Development and Technique in Fashion Textiles, Batsford
Further References:
1. Clarke, S 2011, Textile Design (Portfolio), Laurence King, London
2. Collier, B J & Bide, M & Tortora, P, G 2008, Understanding Textiles, 7th Ed., Prentice Hall.
3. Drusilla, C 2008, Textile Now, Laurence King Publishers.
Magazines and Periodicals: 1. International Textiles
2. International Textile Bulletin
3. Journal of the Society of Dyers & Colorists
4. Textile View
5. Textile World
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 151
Online References 1. www.wgsn.com
Creation/Revision Record:
Version Date Created/Revised by
1 26 Jan 2016 Ho Shui Yi, Georgia
2 15 Apr 2016 WAN Pacino
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 152
Module Syllabus
Module Title Millinery and Headgear Studio
Module Code FID4206
QF Credits 6
QF Level 4
Notional Learning Hours
60 hrs
Contact Hours*: 26 hrs
Lecture 6 hrs Tutorial 4 hrs Workshop/Lab 16 hrs Visit/Seminar - hrs
Self-study Hours: 34 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, students are expected to be able to:
1. evaluate the contextual influences of millinery relating to fashion on the period of time;
2. manipulate various materials and techniques for the construction of soft hat designs;
3. source appropriate accessory materials for adding details to the hat design in order to reflect the style of a given theme; and
4. create hats to reflect technical skills learned, trend references which demonstrates adequate balance between creativity and functionality.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 153
Learning Contents and Indicative Contact Hours:
Learning Contents
Indicative
Contact Hours
1. Historical styles and shape of millinery
Background and history
Fashion and headpiece accessories (bridal headwear, veil, tiara, felt hat, straw hat, soft hat)
2 hours
2. Product and material knowledge of soft hat design
Terminology and components
Tools and equipment
Material properties
4 hours
3. Analysis of the variables in soft hat development
Material sourcing and preparation
Head size measurement
Production sketches development
6 hours
4. Basic soft hat construction and assembling
techniques
Health and safety
Pattern making
Material / fabric laying and cutting
Soft hat hand stitching techniques
Basic trimming and finishing
14 hours
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 154
Mapping of Learning Contents with Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3 4
1 Historical styles and shape of millinery
2 Product and material knowledge of soft hat design
3 Analysis of the variables in soft hat development
4. Basic soft hat construction and assembling techniques
Learning and Teaching Strategies:
Students will be introduced to various kinds of headpieces, by evaluating the design techniques, materials and possible end uses, to develop fundamental knowledge.
Teaching is student-centred with demonstration, studio practices, tutorial advices and close guidance on idea generations to product development, which involves an experiential and integrative approach to learning, developed by associating design and technological considerations with aesthetics, allowing students to develop problem solving skills.
Design studios and workshops with appropriate facilities will be allocated to support learning.
Assessment Scheme:
Continuous Assessment (CA) 60%
End of Module Assessment (EA) 40%
Total 100%
Essential References:
1. Bentinck, J., 2014. Designing and making hats and headpieces, Ramsbury: The Crowood Press.
2. Langley, S. & Dowling, J., 2004. Vintage hats & bonnets, 1770-1970: identification & values, Paducah, KY: Collector Books.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 155
Further References:
1. Leitner, C., 2005. Paper textiles, London: A & C Black.
2. Freeman-Zachery Rice, 2004. New techniques for wearable art: creative ideas for transforming clothes and accessories, Gloucester, MA: Quarry Books.
3. Henriksen, K. & Ahlburg, S., 2011. Hats, London: A & C Black.
4. Shephard, N., 2006. 1,000 hats, Atglen, PA: Schiffer.
Magazines and Periodicals:
1. Insight Colour and Texture Forecast, Kent, Insight, England
2. Peclers Trend Book, Peclers Paris
3. Women’s Wear Daily, Fairchild Publications, New York
Online References
1. www.wgsn.com
Creation/Revision Record:
Version Date Created/Revised by
1 26 Jan 2016 Ho Shui Yi, Georgia
2 15 Apr 2016 WAN Pacino
3 21 Aug 2018 CHEUNG Chi Yung
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 156
Module Syllabus
Module Title Portfolio Development
Module Code FID4153
QF Credits 7
QF Level 4
Notional Learning Hours
70 hrs
Contact Hours*: 26 hrs
Lecture 12 hrs
Tutorial 14 hrs
Workshop/Lab - hrs
Visit/Seminar - hrs
Self-study Hours: 44 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, learners are expected to be able to:
1. initial, plan and control costume design, hair and makeup portfolio through an
analytical and management skill;
2. analyse their own inclinations and strengths and weaknesses in order to plan their
future career development;
3. prepare a professional portfolio of work that re-presenting their strengths and abilities
in fashion image design; and
4. execute an effective interview skills for further career development.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 157
Learning Contents and Indicative Contact Hours:
Learning Contents
Indicative
Contact Hours
1. Design and management
Introduction to costume design management
Establishment, operation and management of a design portfolio
5 hours
2. Self analysis and career planning
Personal analysis and reflection
Portfolio analysis
Job and further study opportunities
5 hours
3. Portfolio management
Introduction to different portfolio types/formats including print, digital and online
Organisation and design of a professional portfolio
Portfolio presentation skills
10 hours
4. Interview techniques for designs
Preparation for job and study interviews
Before, during and after the interview
6 hours
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3 4
1 Research Studies
2 Design Development
3 Technical Studies & Workshop Practice
4 Interview techniques for designs
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 158
Learning and Teaching Strategies:
The module is conducted through a combination of lectures, tutorials and critiques to equip students with knowledge and skills required in the process of portfolio making.
In a student-centred, problem-based learning approach, learners will work on projects to further strengthen their analytical and problem solving skills.
Assessment Scheme:
Continuous Assessment (CA) 50%
End-of-Module Assessment (EA) 50%
Total 100%
References:
1. Ingham, R. & Covey, L., 2003. The costume technicians handbook, Portsmouth, NH: Heinemann.
2. Blumenthal, E., Taymor, J. & Monda, A., 2007. Julie Taymor: playing with fire: theater, opera, film, Abrams, NY: Abrams.
Further references:
1. Jones, C J 1992, Design Methods, Van Nostrand Reinhold, New York.
2. Potter, N 2002, What is a Designer: Things, Place, Messages, 4th edn, Hyphen Press, London.
3. Ochoa, G & Corey, M 2006, The 100 Best Trends, 2006: Emerging Developments You Can't Afford to Ignore, Adams Media Corporation, MA.
4. Walker, S 2008, Sustainable by Design: Explorations in Theory and Practice, NYU Press, New York.
Creation/Revision Record:
Version Date Revised by
1 26 Apr 2016 Wan Pacino
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 159
Module Syllabus
Module Title Expanded Studies: Advanced Costumes Workshop
Module Code FID4043
QF Credits 6
QF Level 4
Notional Learning Hours
60 hrs
Contact Hours*: 26 hrs
Lecture 3 hrs
Tutorial 3 hrs
Workshop/Lab 20 hrs
Visit/Seminar - hrs
Self-study Hours: 34 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, students are expected to be able to:
1. research and evaluate the characteristics of costume from 19th to 21st centuries;
2. integrate creativity, aesthetic and advanced technological skills to interpret a variety of advanced costume making methods;
3. manipulate the construction of period costume through fabrication, accessory and decoration; and
4. apply historical knowledge and convert it into contemporary costume designs.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 160
Learning Contents and Indicative Contact Hours:
Learning Contents
Indicative Contact Hours
1. Introduction to related areas of studies
Research and evaluate the characteristic of costume from19th – 21st century
Study through historical important character, fashion icon and trend setter
The period costume influence on modern fashion
6 hours
2. Costume technology (Crinoline and petticoat)
Appreciation of different types of crinoline, petticoat which had been use for ladies’ underwear both from 19th - 21st century.
Garment making techniques which transform 3D garment to 2D pattern
Crinoline and soft petticoat construction methods
Fitting and alteration techniques to achieve a standard outcome
17 hours
3. Decorations and materials used on crinoline and petticoat
Fastening, boning and lacing application in modern and period costume and its sewing method
Fabrication both inside and outside of corset and petticoat in different period
Lace and embroidery application
3 hours
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3 4
1 Introduction to related areas of studies
2 Costume technology (Crinoline and petticoat)
3 Decorations and materials used on crinoline and petticoat
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 161
Learning and Teaching Strategies:
A series of lectures will be structured to introduce the main concepts of aesthetics and semiotics in period costumes, supplemented by notes, on-line and other reading materials.
The main learning activity will be executed through a range of open collaborative discussions, demonstration, and discourses supported by hand-outs, on-line materials, exercises and self-reflective journal.
Students will be encouraged to apply the learned practices and skills across different modules e.g. design projects, cultural studies, and creative thinking.
The module adopts a project-based approach in the integration of fashion technology and history of costume to the realisation of a period costume. Awareness of the relationship between the current daily fashion and historical costume is introduced.
Assessment Scheme:
Continuous Assessment (CA) 50%
End of Module Assessment (EA) 50%
Total 100%
References:
1. Vanderhoff, M., 1984. Clothes, clues, and careers, Lexington, MA: Ginn.
2. Arnold, J., 2008. Cut and construction of linen shirts, smocks, neckwear, headwear, etc, London: Macmillan.
3. Vecellio, C., Rosenthal, M.F. & Jones, A.R., 2008. The clothing of the Renaissance world: Europe, Asia, Africa, the Americas: Cesare Vecellios Habiti Antichi et Moderni, London: Thames & Hudson. Fabric Sewing Guide, Scheffler, Claire, Chilton Pub. 1998
4. Marshall, F., 1955. Fashion drawing, London: Studio Publications.
5. Payne, B., 1965. History of costume: from the ancient Egyptians to the twentieth century, New York: Harper Collins.
6. Armstrong, H.J., 2006. Patternmaking for fashion design, Upper Saddle River, NJ: Pearson Prentice Hall.
7. Anon, 2002. Plays, the drama magazine for young people (October 2002), Waukesha, WI: Kalmbach Pub. Co..
8. Tompkins, J., 1978. Stage costumes and how to make them, London: Pitman.
9. Anawalt, P.R., 2007. The worldwide history of dress, London: Thames & Hudson.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 162
Online References
1. www.costumes.org
2. www.reasofelegance.com
3. www.library.kent.edu
4. www.fashionabout.com
5. www.accessoryweb.com
6. www.lindyhopping.com
7. www.fashion.net
8. www.thecostumepage
9. www.fashionicon
10. www.thehistoryofcostume
11. www.hollywood-costumes.com
12. www.theatrelibrary.org/links/Technologies.html
Creation/Revision Record:
Version Date Created/Revised by
1 11 Nov 2014 CHEUNG Chi Yung
2 16 Apr 2016 WAN Pacino
3 22 Aug 2018 CHEUNG Chi Yung
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 163
Module Syllabus
Module Title Expanded Studies: Costume Design Project
Module Code FID4196
QF Credits 7
QF Level 4
Notional Learning Hours
70 hrs
Contact Hours*: 26 hrs
Lecture 14 hrs
Tutorial 12 hrs
Workshop/Lab - hrs
Visit/Seminar - hrs
Self-study Hours: 44 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes: On completion of the module, students are expected to be able to:
1. research and evaluate costume design careers in various entertainment art;
2. analyse the importance of costume for commercial and entertainment art industry;
3. propose and associate design concepts and ideas with costume renderings for a given theme of a performance; and
4. create character costume drawings basing on a story script with supporting fabrics, materials, colour, form and texture of an entertainment production.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 164
Learning Contents and Indicative Contact Hours:
Learning Contents
Indicative Contact Hours
1. Research and evaluate costume designs in entertainment art.
Introduction to art form of an entertainment art e.g. film, concert, TV, and multi-disciplinary performances ,and
The costume of an entertainment art
Elements and characteristics of costume design of entertainment production
4 hours
2. Understanding the importance of costume
Definition of “NEED’ in terms of costume of commercial and entertainment productions
Research and analysis the character from the story script
Evaluate the trend of the costume design in commercial and entertainment industry
4 hours
3. Costume design methodology- Step I
Steps in discover, reveal, and refine images described in the story script
Apply appropriate drawing style and technique of a specific costume design
Design idea development
Production sketch of the costume drawing
8 hours
4. Costume design methodology- Step II
Skills in choosing of material and fabric
Application of colour and texture
Coordination with costume accessories, makeup and hair to create a certain style
8 hours
5. Visualization and presentation techniques
Using different drawing style to interpret individual character style
2 hours
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 165
Mapping of Learning Contents with Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3 4
1 Research and evaluate costume designs in entertainment art.
2 Understanding the importance of costume
3 Costume design methodology- step I
4 Costume design methodology- Step II
5 Visualization and presentation techniques
Learning and Teaching Strategies:
A series of lectures will be structured to introduce the costume design of entertainment art, text and character analysis supplemented by notes, ppt and other reading materials.
The main learning activity will be executed through the case study of some popular TV, movies and plays. Real clothing study from the Fashion Archive will let the students have a more understanding of garment construction and details.
Assessment Plan:
Continuous Assessment (CA) 50%
End of Module Assessment (EA) 50%
Total 100%
Essential References:
1. Ingham, R., 1992. The costume designers handbook: a complete guide for amateur and professional costume designers 2nd Revised ed. edition., Longman.
2. Hart, A. & North, S., 2000. Fashion in detail: from the 17th and 18th centuries, New York: Rizzoli.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 166
Further References:
1. Jorgensen, J. & Scoggins, D.L., 2015. Creating the illusion: a fashionable history of Hollywood costume designers, Philadelphia: Running Press.
2. Jorgensen, J. & Powell, S., 2010. Edith Head: the fifty-year career of Hollywoods greatest costume designer, Philadelphia: Running Press.
3. Landis, D.N., 2011. Dressed: a Century of Hollywood Costume Design, Harpercollins.
4. Cunnington, c. willett, 2007. History of underclothes, New york: Dover.
5. Blackman, C., 2017. 100 years of fashion illustration, London: Laurence King Publishing.
6. Rubenstein, H., 2011. 100 unforgettable dresses, New York: Harper Design.
7. Leventon, M., 2008. What people wore when: a complete illustrated history of costume from ancient times to the nineteenth century for every level of society, New York: St. Martins Griffin.
8. Theberge Pierre & Graham, M., 2003. The body transformed, Ottawa: National Gallery of Canada.
Creation/Revision Record:
Version Date Created/Revised by
1 4 Feb.2016 Tam Ka Yee, Mandy
2 15 Apr 2016 WAN Pacino
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 167
Module Syllabus
Module Title Expanded Studies: Costumes Workshop
Module Code FID4042
QF Credits 6
QF Level 4
Notional Learning Hours
60 hrs
Contact Hours*: 26 hrs
Lecture 6 hrs
Tutorial 2 hrs
Workshop/Lab 18 hrs
Visit/Seminar - hrs
Self-study Hours: 34 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, students are expected to be able to:
1. identify the appearance from different social status of western costume in a historical period;
2. apply creativity, aesthetic and technological skills to interpret a variety of costume making methods;
3. analyse the distinguish styling intentions of period costume from 14th to 18th centuries; and
4. create costume design through an analysis process of a given historical period.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 168
Learning Contents and Indicative Contact Hours:
Learning Contents Indicative Contact Hours
1. Knowledge of costume (14th – 18th century)
Brief introduction of the period costume from 14th – 18th century
Introduce the relationship between historic costume and contemporary dress
Terminology of period costume
6 hours
2. Costume technology (corsetry and draping)
Corsetry and period costume draping
Transforming 3D garment to 2D pattern
Corsetry assembly methods - including eyelets, boning and lacing
Period costume fitting
18 hours
3. Decoration and special effects on period costume (14th – 18 century)
Decoration and effects on period costume
How the period costume decoration and special affect have influenced the modern fashion.
2 hours
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3 4
1 Knowledge of costume (14th – 18th century)
2 Costume technology (corsetry and draping)
3 Decoration and special effects on period costume (14th – 18 century)
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 169
Learning and Teaching Strategies:
A series of lectures will be structured to introduce the main concepts of aesthetics and semiotics in period costumes, supplemented by notes, on-line and other reading materials.
The main learning activity will be executed through a range of open collaborative discussions, demonstrations, and discourses supported by on-line materials, exercises and self-reflective journal.
Students will be encouraged to apply the learned practices and skills across different modules e.g. design projects, cultural studies, and creative thinking.
The module adopts a project-based approach in the integration of fashion technology and history of costume to the realization of a period costume. Awareness of the relationship between the current daily fashion and historical costume is introduced.
Assessment Scheme:
Continuous Assessment (CA) 60%
End of Module Assessment (EA) 40%
Total 100%
References: 1. Hennessy, K. & Fischel, A., 2012. Fashion: the definitive history of costume and style,
New York: DK Publishing. 2. Landis, D.N. & Landis, D.N., 2012. Costume design, Lewes: Ilex.
3. Vecellio, C., Rosenthal, M.F. & Jones, A.R., 2008. The clothing of the Renaissance world: Europe, Asia, Africa, the Americas: Cesare Vecellios Habiti Antichi et Moderni, London: Thames & Hudson.
4. Sparks, L.S., 2009. The basics of corset building: a handbook for beginners 1st ed., New York: St. Martins Griffin.
5. Anawalt, P.R., 2007. The worldwide history of dress, London: Thames & Hudson. Online References: 1. <www.costumes.org>
2. <www.reasofelegance.com>
3. <www.library.kent.edu>
4. <www.fashionabout.com>
5. <www.accessoryweb.com>
6. <www.lindyhopping.com>
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 170
7. <www.fashion.net>
8. <www.thecostumepage>
9. <www.fashionicon>
10. <www.thehistoryofcostume>
11. <www.hollywood-costumes.com>
12. <www.theatrelibrary.org/links/Technologies.html>
Creation/Revision Record:
Version Date Created/Revised by
1 Nov 2014 CHEUNG Chi Yung
2 Apr 2016 WAN Pacino
3 Aug 2018 CHEUNG Chi Yung
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 171
Module Syllabus
Module Title Expanded Studies: Experiential Project for Costume
Module Code FID3072
QF Credits 2
QF Level 3
Notional Learning Hours
20 hrs
Contact Hours*:13 hrs
Lecture 2 hrs
Tutorial 2 hrs
Workshop/Lab 9 hrs
Visit/Seminar - hrs
Self-study Hours: 7 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, students are expected to be able to:
1. select scenario(s) and identify topic(s) to experience and explore in a specific context;
2. produce project brief outlining the learning plan and objectives;
3. conduct independent study for experiential learning to attain goals set in the project
brief;
4. analyse phenomena observed, and problems and opportunities identified in the
experiential learning process; and
5. reflect on the experiential learning process and outcome to identify potential
opportunities for individual’s development in the area/stream/industry concerned.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 172
Learning Contents and Indicative Curriculum Hours:
Learning Contents
Indicative Contact Hours
1. Project orientation
Writing experiential project brief with personalised learning/exploration plan
Setting goals and expectations
Understanding issues of safety, legalities and ethics, etc.
Identifying roles and responsibilities of participating parties – Statement of Understanding may be signed by the parties where applicable
2 hours
2. Project experimentation
Exploration of new learning and experiences on
- process of organizing, procuring, and constructing props/scenic arts for theatrical production
- analyzing a script to develop props list and backdrop setting
- develop skills needed to build up props and scenic arts, with a variety of techniques applied
Completion of project attaining set goals
9 hours
3. Project presentation
Verbal presentation and report in appropriate media
consolidating project outcomes
- reflection and evaluation of learning and experience
- projecting potential opportunities for further exploration/development
2 hours
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 173
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3 4 5
1 Project orientation
2 Project experimentation
3 Project presentation
Learning and Teaching Strategies:
The module integrates academic classroom theories with on-site learning experiences. Students will understand real-life culture and practices, and gain confidence through undertaking the self-directed project.
Orientation before the experiential project enables students to understand the objectives, processes and ethics in relation to the experiential activities, as well as their own responsibilities and roles.
Students plan and manage their own experiential projects through personalised learning plans and learning journals. Tutorials / periodical visits by tutor/mentor will help ensure project objectives are met.
Presentations at the end of the experiential project help students consolidate and share their experience and learning with others, and identify opportunities for individual’s development.
Assessment Scheme:
Continuous Assessment (CA) 50%
End of Module Assessment (EA) 50%
Total 100%
References:
1. Relevant handbooks/references of the participating organisations and involved activities.
2. Fry, T 2008, Design Futuring: Sustainability, Ethics and New Practice, Berg
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 174
Publishers.
3. Hofstede, G J & Pedersen P B 2002, Exploring Culture: Exercises, Stories, and Synthetic Cultures, Intercultural Press.
4. Laurel, B 2003, Design research: Methods and perspective, MIT Press, Cambridge, Mass.
5. Siberman, M L 2007, The Handbook of Experiential Learning (Essential Knowledge Resource), Pfeiffer.
Creation/Revision Record:
Version Date Revised by
1 20 Jan 2016 Shaun Cheung
2 15 Apr 2016 WAN Pacino
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 175
Module Syllabus
Module Title Expanded Studies: Props and Accessories Studio
Module Code FID4201
QF Credits 6
QF Level 4
Notional Learning Hours
60 hrs
Contact Hours*: 26 hrs
Lecture 8 hrs
Tutorial 4 hrs
Workshop/Lab 14 hrs
Visit/Seminar -hrs
Self-study Hours: 34 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes: On completion of the module, students are expected to be able to:
1. compare the function and meaning of costume props and accessories from different performance productions;
2. create design concepts and ideas for costume props and accessories design under a specific theme through research and analysis; and
3. interpret the material knowledge, construction skills and design know-how into a props or accessories designs.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 176
Learning Contents and Indicative Contact Hours:
Learning Contents
Indicative Contact Hours
1. Design for creating a costume props and accessories
Research and analysis of the text and characters
Elements of costume props and accessories
2 hours
2. Function and meaning of costume props and accessories
Definition of costume props and accessories
How the costume props work with a performer
2 hours
3. Costume props and accessories design
Step in discovering, revealing and refining and approach to the text and character
Appropriate apply drawing style and technique of a costume props design
Production sketch of the costume props and accessories design scale and proportion
4 hours
4. Application of materials, color, and texture
Skills in choosing of material and fabric
Collaboration with costume accessories, makeup and hair
4 hours
5. Costume props and accessories construction
Making processing of an object with appropriate skill and technique in workshop
Realization of a final product from original design
14 hours
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 177
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents
Intended Learning Outcomes
1 2 3
1 Design for creating a costume props and accessories
2 Function and meaning of costume props and accessories
3 Costume props and accessories design
4 Application of materials, colour, and texture
5 Costume props and accessories construction
Learning and Teaching Strategies:
A series of lectures will be structured to introduce the costume props and accessories, design and construction supplemented by notes, PowerPoint and other reading materials.
The main learning activity will be executed through a range of open collaborative discussions, workshop, presentations and discourses supported by visual materials, and self-reflective journal.
Students will be encouraged to apply the learned practices and skills across different modules e.g. cultural studies and research, creative thinking.
Assessment Plan:
Continuous Assessment (CA) 50%
End of Module Assessment (EA) 50%
Total 100%
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 178
Essential References: 1. Evans, J., 2013. How to make jewelry with beads: an easy & complete step by step
guide, United States: publisher not identified.
2. James, T., 2006. The mask-making handbook, Studio City, CA: Players Press.
Further References: 1. Duncan-Aimone, K., 2011. The art of jewelry: polymer clay: techniques, projects,
inspiration, New York: Lark Crafts.
2. Phillips, C., 2012. Jewelry: from antiquity to the present, London: Thames and Hudson.
3. James, T., 1990. The prop builders mask-making handbook, Cincinnati (Ohio): Betterway Books.
4. Choklat, A., 2012. Footwear design, London: Laurence King Pub.
Creation/Revision Record:
Version Date Created/Revised by
1 4 Feb 2016 Tam Ka Yee, Mandy
2 15 Apr 2016 WAN Pacino
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 179
Module Syllabus
Module Title Graduation Costume Project
Module Code FID4203
QF Credits 30
QF Level 4
Notional Learning Hours
300 hrs
Contact Hours*: 78 hrs
Lecture 12 hrs Tutorial 36 hrs Workshop/Lab 30 hrs Visit/Seminar - hrs
Self-study Hours: 222 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
Module Intended Learning Outcomes:
On completion of the module, students are expected to be able to:
1. integrate a broad range of knowledge and skills to achieve a holistic design solution through research in selected discipline;
2. initiate, plan and manage projects with critical judgment;
3. execute a design project independently, applying integrated skills and methodologies and taking into account business, technological and production parameters; and
4. present a design proposal effectively and professionally for selected situation(s).
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 180
Learning Contents and Indicative Contact Hours:
Learning Contents
Indicative
Contact Hours
1. Management of the design process
Initiating, planning, monitoring, and evaluating the design process
Coordinating schedules, resources, budgets and time-management
Collaborating with clients and professionals in the design processes
6 hours
2. Identification of project opportunities
Identifying and forecasting relevant trends (local and non-local including China) in design, market, industry, technology and society
Identifying user’s/ client’s needs and wants, market gaps, opportunities, directions, and themes for a project
Establishing the design criteria and project brief
12 hours
3. Application of design knowledge to develop innovative holistic solutions
Applying appropriate design methodologies and critical judgment
Integrating design knowledge and skills to generate innovative designs that achieve the design criteria and objectives which are coherent with the positioning, user’s/ client’s needs/ wants, create added value and provide fresh user experiences
Incorporating ethical and sustainable concerns in the development
24 hours
4. Application of business, technological and production knowledge
Contemplating business concerns including trend forecasts, marketplace and client’s objectives
Innovative use of technologies, e.g. incorporation of appropriate technologies in design and production
Considering production concerns, e.g. material application, manufacturing/ construction, quality control
18 hours
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 181
Learning Contents
Indicative
Contact Hours
5. Application of visualisation, presentation, and evaluation skills
Applying integrated communication skills to realise design ideas, e.g. graphic, multimedia, CAD, prototyping, verbal presentation, and report writing, etc
Professional presentations demonstrating the individual portfolio style of student, or the brand image of client
Applying analytical and evaluation skills to review and evaluate project outcomes
18 hours
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3 4
1 Management of the design process
2 Identification of project opportunities
3 Application of design knowledge to develop innovative holistic solutions
4 Application of business, technological and production knowledge
5 Application of visualisation, presentation, and evaluation skills
Learning and Teaching Strategies:
Learning and teaching will be accomplished interactively in multiple formats, including structured lectures, seminars, demonstrations, tutorials, workshops, visits, and presentations, where appropriate.
A project-based and student-centred approach provides practical opportunities for students to integrate and apply learned knowledge and skills, and develop their initiative and self-learning abilities along with their own interests and strengths, in achieving the intended scope of outcomes and standard. Students will be required to execute design processes independently with appropriate guidance and support, in order to foster their confidence and project management abilities.
Collaborative projects with clients may be integrated to help students position the project in a real-life context. Alignment with other modules is encouraged to provide
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 182
students opportunities to further integrate their learning.
Group critiques and self-assessment encourage peer group learning and self-reflection.
Assessment Scheme:
Continuous Assessment (CA) 50%
End of Module Assessment (EA) 50%
Total 100%
Essential References: 1. Ingham, R., 1992. The costume designers handbook: a complete guide for amateur
and professional costume designers, London: Heinemann Drama.
2. Blumenthal, E., Taymor, J. & Monda, A., 2007. Julie Taymor: playing with fire: theater, opera, film, Abrams, NY: Abrams.
Further References:
1. Fiell, C 2005, Designing the 21st Century, Taschen, Koln.
2. Visocky, O G J & Visocky, O G K 2009, The Designer’s Research Manual: Succeed in design by knowing your clients and what they really need, Rockport Publishers, Gloucester, Mass.
3. Sanoff, H 1991, Visual research methods in design, Van Nostrand Reinhold, New York.
4. Best, K 2006, Design Management: Managing Design Strategy, Process and Implementation (Ava Academia), AVA Publishing, Lausanne, Switzerland.
5. Jones, C J 1992, Design Methods, Van Nostrand Reinhold, New York.
6. Potter, N 2002, What is a Designer: Things, Place, Messages, 4th edn, Hyphen Press, London.
7. Ochoa, G & Corey, M 2006, The 100 Best Trends, 2006: Emerging Developments You Can't Afford to Ignore, Adams Media Corporation, MA.
8. Walker, S 2008, Sustainable by Design: Explorations in Theory and Practice, NYU Press, New York.
9. Mackenzie, D 1997, Green Design: Design for the Environment, Van Nostrand Reinhold, New York.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 183
10. Grear, M 2006, Inside/Outside: From the Basics to the Practice of Design, 2nd edn, Van Nostrand Reinhold, New York.
11. Evamy, M & Robert, L 2004, In Sight: a Guide to Design with Low Vision in Mind, RotoVision, Hove; Mies, Switzerland.
12. McKelvey, K & Munslow, J 2003, Fashion Design: Process, Innovation and Practice, Blackwell, Oxford.
13. Watkins, D 2000, Design Sourcebook: Jewellery, New Holland.
14. Fiell, C, & Fiell, P 2007, Design Now!, Taschen, Köln.
15. Shedroff, N 2001, Experience Design, New Riders, Indianapolis.
Creation/Revision Record:
Version Date Created/Revised By
1 15 Apr 2016 WAN Pacino
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 184
Module Syllabus
Module Title Industrial Attachment
Module Code DES4901M
QF Credits 10 IA credits #
QF Level 4
Notional Learning Hours
103 hrs
Contact Hours: 13 hrs (Coaching and Student Support Activities ^) (for full time pre-employment)
Lecture 7 hrs
Coaching 6 hrs
Work Attachment: min 90 hrs (for full time pre-employment)
Self-study Hours: - hrs (for full time pre-employment)
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
# Attaining a pass in the Industrial Attachment module is a graduation requirement. The module is assessed
on a pass/fail basis and carries10 IA credits.
^ Coaching and student support activities may include, among others, pre-attachment orientation, workshop,
seminars, talks by employers and alumni, visits by module lecturers during attachment, post attachment
presentation and self-reflection sessions.
Module Intended Learning Outcomes: On completion of the module, students are expected to be able to:
1. relate and apply learned knowledge and professional/technical skills to practices in a real industrial, commercial or organisational environment;
2. handle assigned tasks in the workplace with positive work attitude and appropriate key skills, such as interpersonal skills, teamwork skills, management skills, logical thinking, problem solving skills and communication skills;
3. identify their own strengths and weaknesses (in relation to working in a workplace) through reflection on experience gained in the attachment;
4. devise a personal development plan in the selected discipline; and
5. identify and justify design’s roles and potentials to add value in business and various organisations.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 185
Learning Contents and Indicative Contact Hours:
Learning Contents and Processes
Indicative
Contact Hours
1. Orientation and student support activities
Objectives of Industrial Attachment (IA)
Roles of trainees, tutors / IA supervisors, and industry mentors
Positive work attitude
Concept of key skills and importance of teamwork
Workplace safety, professional expectations, legalities, ethics, and etiquette
Agreement, employer-specific guidelines and information, including:
Statement of Understanding among the participating organisations, HKDI/VTC and the students
Job description and attachment schedules Workplace procedures e.g. leave application,
discipline, grievance, feedback, etc Background of the organisations
Student’s personalised learning plan
Coaching: 7 hours
2. Attachment experience
Application of key skills and professional/technical skills to fulfil the attachment as specified in the attachment schedule(s)
Reflection and recording of learning: record of work/activities, progress and learning points, reflection and ideas
Attachment review with tutor / IA supervisor
Attachment review with industry mentors
Coaching: 2 hours
Work Attachment: minimum 90 hours
3. Reporting and evaluation
Reporting and evaluation of learning experience through verbal presentation and submission of illustrated written report on: Characteristics of the assigned operational unit Practices at the workplace Work attitude and performance expectation of the
employer Role of design and creativity in the organisation (if
applicable) Learning points from the attachment and relation with
learnt knowledge and professional/technical skills Reflection and evaluation of own performance, strengths
and weaknesses, areas of and plan for improvement and further development
Coaching: 4 hours
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 186
Mapping of Learning Contents with Module Intended Learning Outcomes:
Learning Contents
Module Intended Learning Outcomes
1 2 3 4 5
1 Orientation and student support activities
2 Attachment experience
3 Reporting and evaluation
Learning and Teaching Strategies:
1. Each student should practise at a workplace for a reasonable length of time (not less than 90 hours) in order to gain the practical work experience in a real industrial, commercial or organisational environment.
2. Local and non-local workplace experiences, especially those in Mainland China, are encouraged.
3. Orientation will be held before industrial attachment for students to understand the objectives, the process, and the issues in relation to the workplace, as well as their own responsibilities and roles. Where appropriate, workshops, seminars and talks by employers and alumni will be organised to familiarise students with workplace requirements and acceptable work behaviour, etc.
4. Tutors / IA supervisors will review with the students and industry mentors during the attachment period to evaluate the well-being of the students, monitor standards of performance, identify learning needs and receive feedback from students and industry mentors for the sake of maximising student learning. Workplace visit(s) will be conducted by the tutor / IA supervisor under feasible circumstances.
5. Presentation and/or sharing sessions will be conducted at the end/after the attachment for students to share and consolidate their work experience and to reflect on their own strengths and weaknesses for future improvement.
6. In case of insufficient jobs under a real industrial, commercial or organisational environment for placement of all students, or should students be considered not ready for such attachment, industry-based project for completion at home / on campus as well as other structured experiential learning experience are also accepted as alternatives to industrial attachment, though they will be accorded lower preference than industrial placement at the workplace.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 187
Assessment Scheme:
Continuous Assessment (CA) 50%
End of Module Assessment (EA) 50%
Total 100%
Assessment Tasks Assessment Criteria Mark Distribution
1. Performance Evaluation by Industry Mentor*
(relation and) application of learned knowledge and professional/technical skills
handling of assigned tasks in workplace with positive work attitude and appropriate key skills
CA 50%
2. IA Report and Presentation#
relation (and application) of learned knowledge and professional/technical skills to real life practices
identification of own strengths and weaknesses
devising of personal development plan in the selected discipline
identification and justification of design’s roles and potentials
EA 50%
* The Student’s Performance Evaluation Form is to be completed by the Industry Mentor as far as practical. In case of the unavailability of the Industry Mentor to complete the Form, the IA Supervisor may complete the Form in consultation with the Industry Partner/Mentor.
# The following sections (not exclusive) should be included in the IA Report and Presentation: Learning Plan for IA IA Record Self-evaluation of IA Performance & Strengths and Weaknesses Personal Development Plan Roles of Design and Creativity identified
Grade:
This module is to be assessed on a pass/fail basis:
Fail (F): below 40% Pass (P): 40-100%
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 188
Essential References:
1. Relevant staff/employee/trainee handbooks of the participating organisations or companies
2. Guidelines for Industrial Attachment, Design Discipline
Further References:
1. Lewrick, M, Link, P & Leifer, L 2018, The design thinking playbook: Mindful digital transformation of teams, products, services, businesses and ecosystems, John Wiley & Sons, Hoboken, New Jersey.
2. Rose, D 2015, Enchanted objects: Innovation, design, and the future of technology, Scribner, New York.
3. Greever, T 2015, Articulating design decisions: Communicate with stakeholders, keep your sanity, and deliver the best user experience, O'Reilly Media, Sebastopol, CA.
4. Potter, N 2002, What is a designer: Things, place, messages, 4th edn, Hyphen Press, London.
5. Fry, T 2008, Design futuring: Sustainability, ethics and new practice, Berg Publishers, Oxford.
6. Perkins, S 2010, Talent is not enough: Business secrets for designers, New Riders, Berkeley, Calif.
7. Eisenman, S 2008, Building design portfolios: Innovative concepts for presenting your work (Design field guide), Rockport Publishers, Mass.
8. Brainard, S 2005, A design manual, 4th edn, Englewood Cliffs, Prentice Hall, New Jersey.
9. Sherwin, D 2010, Creative workshop: 80 challenges to sharpen your design skills, HOW Books, Cincinnati, Ohio.
10. Jones, C J 2008, Design methods, 2nd edn, Wiley.
11. Calabretta, G, Gemser, G & Karpen, I 2016, Strategic design: Eight essential practices every strategic designer must master, BIS Publishers.
12. Ramroth, W 2006, Project management for design professionals, Kaplan Business, Chicago.
13. Franklin, K & Till, C 2018, Radical matter: Rethinking materials for a sustainable future, Thames and Hudson.
14. McDonough, W and Braungart, M 2009, Cradle to cradle: Remaking the way we make things, Vintage Books, London.
15. Chapman, J 2012, Emotionally durable design: Objects, experiences and empathy, Routledge, London; New York.
16. Lupton, E 2017, Design is storytelling, Cooper Hewitt, Smithsonian Design Museum.
17. Steane, J 2013, The principles & processes of interactive design, Fairchild Books.
18. Wikie, B 1996, Creating special effects for TV and video, North Light Books, Oxford, Boston.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 189
19. Glen B 2008, Handbook for sound engineers, 4th edn, Focal Press, USA.
20. Grear, M 2006, Inside/outside: From the basics to the practice of design, 2nd edn, Van Nostrand Reinhold, New York.
21. Cairo, A 2012, The functional art: An introduction to information graphics and visualization, Pearson.
22. Black, S 2012, The sustainable fashion handbook, Thames and Hudson.
23. McKelvey, K & Munslow, J 2003, Fashion design: Process, innovation and practice, Blackwell, Oxford.
24. Arroyo, N M & Cillero & de Motta 2012, The sourcebook of contemporary jewelry design, Harper Design, New York.
25. Locker, P 2017, Basics interior design 02: Exhibition design, Bloomsbury Visual Arts.
26. Piotrowski, C M 2013, Professional practice for interior designers. John Wiley & Sons.
27. Ching, F D K 2011, A visual dictionary of architecture, 2nd edn, John Wiley & Sons.
28. Simonds, J O 2013, Landscape architecture: A manual of environmental planning and design, 5th edn, McGraw-Hill, New York.
29. Doreen W 2014, Hong Kong Media Law: A guide for journalists and media professionals, 2nd expanded edn, Hong Kong University Press, Hong Kong.
30. Itule, B D & Anderson, D A 2007, News writing & reporting for today’s media 7th edn, McGraw-Hill, New York.
31. Kenneth, K 2016, Photojournalism: The professionals’ approach, 7th edn, Focal Press.
32. Tony, H 2015, Journalism: Principles and practice, 3rd edn, SAGE Publications.
33. Turow, J 2012, Media today: An introduction to mass communication, Routledge, New York.
34. 展江 主譯,2014,新聞報道與寫作,新華出版社,北京。
Magazines and Periodicals:
1. @issue: Journal of Business of Design, Corporate Design Foundation, Boston.
2. Marketing, Haymarket Magazines Ltd.
3. Advertising Age, Crain Communications, Inc.
4. D & AD Annual, D&AD, London.
5. Communication Arts, Coyne & Blanchard, Inc, Menlo Park, CA.
6. IDN, Systems Design Ltd, HK.
7. Collezioni, Logos Publishing Srl.
8. Vogue, Conde Nast Publications.
9. i-D, Levelprint Ltd.
10. ID, F&W Publications Inc.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306)
Volume B - Programme Information & Module Syllabuses 190
11. Form: The European Design Magazine, Birkhaeuser Verlag Ag Form.
12. Axis, Maruzen Co Ltd, Japan.
13. Domus, Domus, Italy.
14. Metropolis, Bellerophon Publications.
15. Blue print, Progressive Media Markets Ltd., UK.
16. Green Places, Landscape Design Trust, UK.
17. 21.C, ABC Enterprises, Crows Nest, NSW.
18. Wallpaper, Time Life Entertainment Group Ltd.
19. Popular Science, Bonnier Magazine Group, US.
20. 流行通信 (Ryuko tsushin), INFAS Publications, Japan.
Creation/Revision Record:
Version Date Created/Revised By
1 5 Feb 2009 CHAN Sau Lin, Circula
2 18 Feb 2010 CHAN Sau Lin, Circula
3 30 Mar 2010 CHAN Sau Lin, Circula
4 7 Jun 2010 CHAN Sau Lin, Circula
5 24 Jan 2011 CHAN Sau Lin, Circula
6 19 Feb 2011 ZHANG Ann
7 21 Feb 2011 LO Kwok Wing, Born
NGAI Chung Hon, Angus
8 21 Apr 2011 CHAN Sau Lin, Circula
9 12 Jan 2012 CHAN Sau Lin, Circula
10 31 Jul 2012 CHAN Sau Lin, Circula
11 2 Aug 2013 CHAN Sau Lin, Circula
12 13 Feb 2015 CHAN Sau Lin, Circula
13 10 Mar 2017 LO Chi Wah, Brian
14 30 Mar 2019 CHAN Sau Lin, Circula
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 191
APPENDIX 1 – MODULE ASSESSMENT SCHEMES
for
Higher Diploma in Costume Design for Performance
(AY2019/20) Note: The Module Assessment Schemes (MAS) are compiled at the beginning of each academic term or year. The template may be modified to suit the specific requirements of individual disciplines and teaching units.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 192
單元評核大綱 [AY2019/20]
1 Module Details a 科目編號/名稱 LAN3003 / 職業中文傳意:普通話對話與匯報
Vocational Chinese Communication : Putonghua Conversation and Reports
b 課程編號/名稱 DE114306 / HD in Costume Design for Performance
c 資歷架構學分 6
d 資歷架構級別 第三級
e 學時(總計) 60 小時
f 學時安排
授課時數: 26 小時
講課: - 小時
導修: 18 小時
語言實驗室: 8 小時
訪問/講座 - 小時
自修時數: 34 小時
評估時數: - 小時
2 單元學習成果 (MILO) 單元學習成果評核項目 (請在相關 的空格內加 )
持續評核 (CA) 50% 單元總評核 (EA) 50%
a 就多種不同的話題,熟練地以普通話進行對話。
b 就多種不同的話題,熟練地以普通話進行匯報。
c 以陳述、比較、建議等語言功能,成段落的話語,完成預設的溝通目標。
d 針對情景與說話對象,適當運用與調整說話策略。
3 持續評核(CA) 持續評核佔單元總分:50% a 評核分項 測驗 習作 b 評核數量 1 1 c 百分比 30% 20% 4 單元總評核 (EA): 單元總評核佔單元總分:50% 5 特別評核要求 無
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 193
單元評核大綱 [AY2019/20]
1 Module Details a 科目編號/名稱 LAN4002 / 職業中文傳意:普通話報告
與推介文書 Vocational Chinese Communication: Putonghua Presentations and Promotional Text Writing
b 課程編號/名稱 DE114306 / HD in Costume Design for Performance
c 資歷架構學分 9
d 資歷架構級別 第四級
e 學時(總計) 90 小時
f 學時安排
授課時數: 26 小時
講課: - 小時
導修 22 小時
語言實驗室 4 小時
訪問/講座 - 小時
自修時數: 64 小時
評估時數: - 小時
2 單元學習成果 (MILO) 單元學習成果評核項目 (請在相關 的空格內加 )
持續評核 (CA) 50% 單元總評核 (EA) 50%
a 以成段落的話語作分析、論證、辯護,並恰當運用報告技巧,熟練地以普通話進行報告。
b
整理、分析資料,並針對問題,運用恰當的言辭作出合理的解釋,提出具體的建議,或推介可行的方案。
c 針對與寫作對象,靈活運用與調整寫作策略,達到宣傳活動或產品的目的。
d 撰寫主旨明確、剪裁恰當、文理連貫的宣傳推介文書。
3 持續評核(CA) 持續評核佔單元總分:50% a 評核分項 測驗 習作 b 評核數量 1 1 c 百分比 30% 20% 4 單元總評核 (EA): 單元總評核佔單元總分:50% 5 特別評核要求 無
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 194
Module Assessment Scheme [AY2019/20]
1 Module Details a Module Code/Title LAN4108 / English and Communication:
Persuasive Presentations b Programme Code/Title DE114306 / HD in Costume Design for
Performance
c QF Credits 9
d QF Level of Module 4
e Notional Learning Hours (total) 90
f Notional Learning Hours, comprising of
Contact Hours: 26 hrs
Lecture - hrs Tutorial 18 hrs Workshop/Lab 8 hrs Visit/Seminar - hrs
Self-study Hours: 64 hrs
Assessment Hours: - hrs (Outside Contact/Self-study
Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
Continuous Assessment
End of Module Assessment
a
Express compliments, persuasion, and emotion in oral presentations of information, ideas, related explanations, discussion/argument, and evaluation
3 Continuous Assessment (CA)
Total CA marks contributing to 40% of module mark
a CA component Assignment Notional Learning
Package b No. of assessment (s) 1 1
c CA component as a % of module mark
25% 15%
4 End-of-Module Assessment (EA) in the form of speaking test
Total EA marks contributing to 60% of module mark
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 195
Module Assessment Scheme [AY2019/20]
1 Module Details a Module Code/Title LAN4101 / English and Communication:
Promotional Materials b Programme Code/Title DE114306 / HD in Costume Design for
Performance
c QF Credits 10
d QF Level of Module 4
e Notional Learning Hours (total) 100
f Notional Learning Hours, comprising of
Contact Hours: 39 hrs
Lecture - hrs Tutorial 27 hrs Workshop/Lab 12 hrs Visit/Seminar - hrs
Self-study Hours: 61 hrs
Assessment Hours: - hrs (Outside Contact/Self-
study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
Continuous Assessment
End of Module Assessment
a
Express persuasion and emotion when presenting information, ideas, related explanations, discussion/ argument, and evaluation in written form
3 Continuous Assessment (CA) Total CA marks contributing to 40% of module mark
a CA component Assignment Notional Learning
Package b No. of assessment (s) 1 1
c CA component as a % of module mark
25% 15%
4 End-of-Module Assessment (EA) in the form of written test
Total EA marks contributing to 60% of module mark
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 196
Module Assessment Scheme [AY2019/20]
1 Module Details a Module Code/Title LAN4107 / English and Communication:
Reports b Programme Code/Title DE114306 / HD in Costume Design for
Performance c QF Credits 9
d QF Level of Module 4
e Notional Learning Hours (total)
90
f Notional Learning Hours, comprising of
Contact Hours: 26 hrs
Lecture - hrs Tutorial 18 hrs Workshop/Lab 8 hrs Visit/Seminar - hrs
Self-study Hours: 64 hrs
Assessment Hours: - hrs (Outside Contact/Self-study
Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
Continuous Assessment
End of Module Assessment
a
Express suggestions when presenting information, ideas, related explanations, discussion/argument, and evaluation in written form
3 Continuous Assessment (CA)
Total CA marks contributing to 40% of module mark
a CA component Assignment Notional Learning
Package b No. of assessment (s) 1 1
c CA component as a % of module mark
25% 15%
4 End-of-Module Assessment (EA) in the form of written test
Total EA marks contributing to 60% of module mark
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 197
Module Assessment Scheme [AY2019/20]
1 Module Details a Module Code/Title LAN3103 / English and Communication:
Workplace Correspondence b Programme Code/Title DE114306 / HD in Costume Design for
Performance
c QF Credits 6
d QF Level of Module 3
e Notional Learning Hours (total) 60
f Notional Learning Hours, comprising of
Contact Hours: 26 hrs
Lecture - hrs Tutorial 18 hrs Workshop/Lab 8 hrs Visit/Seminar - hrs
Self-study Hours: 34 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
Continuous Assessment
End of Module Assessment(60%)
a
Handle problems in incoming written correspondence involving predictable information, ideas, related explanations, discussion/argument, and evaluation
3 Continuous Assessment (CA) Total CA marks contributing to 40% of module mark
a CA component Assignment Notional Learning
Package b No. of assessment (s) 1 1
c CA component as a % of module mark
25% 15%
4 End-of-Module Assessment (EA) in the form of written test
Total EA marks contributing to 60% of module mark
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 198
Module Assessment Scheme [AY2019/20]
1 Module Details a Module Code/Title LAN3100 / English and Communication:
Workplace Interaction b Programme Code/Title DE114306 / HD in Costume Design for
Performance
c QF Credits 6
d QF Level of Module 3
e Notional Learning Hours (total) 60
f Notional Learning Hours, comprising of
Contact Hours: 26 hrs
Lecture - hrs Tutorial 18 hrs Workshop/Lab 8 hrs Visit/Seminar - hrs
Self-study Hours: 34 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
Continuous Assessment
End of Module Assessment
a
Handle suggestions, offers, preference and persuasion in oral interactions involving predictable information, ideas, related explanations, discussion/argument, and evaluation
3 Continuous Assessment (CA) Total CA marks contributing to 40% of module mark
a CA component Assignment Notional Learning
Package b No. of assessment (s) 1 1
c CA component as a % of module mark
25% 15%
4 End-of-Module Assessment (EA) in the form of a speaking test
Total EA marks contributing to 60% of module mark
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 199
Module Assessment Scheme [AY 2019/20]
1 Module Details
a Module Code/Title SDD4006 / SDD4006M / Collaboration, Teamwork & Social Engagement
b Programme Code/Title DE114306 / HD in Costume Design for Performance
c QF Credits 6
d QF Level of Module 4
e Notional Learning Hours (total)
60
f Notional Learning Hours, comprising of
Contact Hours: 26 hrs
Self-study Hours: 34 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA In-class exercise
EA Project Presentation
a MILO 1
b MILO 2
c MILO 3
3 Assessment
a No. of assessment(s) 1 1
b Weighting as a % of module mark
50% 50%
4 End-of-Module Assessment (EA)
a Duration of EA Nil
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 200
Module Assessment Scheme [AY 2019/20]
1 Module Details
a Module Code/Title SDD4007/ Enhancing Competencies in the 21st Century Workplace
b Programme Code/Title DE114306 / HD in Costume Design for Performance
c QF Credits 3
d QF Level of Module 4
e Notional Learning Hours (total)
30
f Notional Learning Hours, comprising of
Contact Hours: 13 hrs
Self-study Hours: 17 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA E-portfolio
EA Mock Interview
a MILO 1
b MILO 2
c MILO 3
3 Assessment
a No. of assessment(s) 1 1
b Weighting as a % of module mark
50% 50%
4 End-of-Module Assessment (EA)
a Duration of EA Nil
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 201
Module Assessment Scheme [AY 2019/20]
1 Module Details
a Module Code/Title SDD4005 / SDD4005M / MindShift: Achieving Personal Growth & Effectiveness
b Programme Code/Title DE114306 / HD in Costume Design for Performance
c QF Credits 6
d QF Level of Module 4
e Notional Learning Hours (total)
60
f Notional Learning Hours, comprising of
Contact Hours: 26 hrs
Self-study Hours: 34 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA In-class exercise
EA Presentation
a MILO 1
b MILO 2
c MILO 3
3 Assessment
a No. of assessment(s) 1 1
b Weighting as a % of module mark
50% 50%
4 End-of-Module Assessment (EA)
a Duration of EA Nil
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 202
Module Assessment Scheme [AY2019/20]
1 Module Details a Module Code/Title ITE3003 / Information Technology Essentials –
Design b Programme Code/Title DE114306 / HD in Costume Design for
Performance c QF Credits 6 d QF Level of Module 3
e Notional Learning Hours (total) 65
f Notional Learning Hours, comprising of
Contact Hours: 26 hrs
Lecture: - hrs Tutorial: - hrs Workshop/Lab: 26 hrs Visit/Seminar: - hrs
Self-study Hours: 39 hrs Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
Workshop EA
a MILO 1
b MILO 2
c MILO 3
3 Continuous Assessment (CA)
Total CA marks contributing to 50% of module mark
a Component Workshop EA b No. of assessment 3 1 c CA component as a % of
module mark 50% 50%
4 End-of-Module Assessment (EA)
Total EA marks contributing to 50% of module mark
a Duration of Examination Nil 5 Any Special Assessment
Requirement Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 203
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code/Title DES4008 / Aesthetics and Semiotics
b Programme Code / Title DE114306 / HD in Costume Design for Performance
c QF Credits 11
d QF Level of Module 4
e Notional Learning Hours (total)
110
f Notional Learning Hours, comprising of
Contact Hours: 39 hrs
Lecture 12 hrs Tutorial 27 hrs Workshop/Lab - hrs Visit/Seminar - hrs
Self-study Hours: 71 hrs
Assessment Hours: - hrs (Outside Contact/Self-study
Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Assig’ts /
Exercise
Lab / Workshop/
Activity Project
Learning Journal
Project
a MILO 1
b MILO 2
c MILO 3
d MILO 4
3 Assessment
a No. of assessment 2 - - - 1
b Weighting as a % of module mark
40% - - - 60%
4 End-of-Module Assessment (EA)
a Duration of EA Last 19 hours
b Distribution of marks 20% Ideation and Development 30% Final work and Application 10% Reflection
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 204
Module Assessment Scheme [AY 2019/20]
1 Module Details
a Module Code/Title DES3006 / Creative and Design Thinking
b Programme Code/Title DE114306 / HD in Costume Design for Performance
c QF Credits 10
d QF Level of Module 3
e Notional Learning Hours (total)
100
f Notional Learning Hours, comprising of
Contact Hours: 39 hrs
Lecture 6 hrs Tutorial 10 hrs Workshop/Lab 20 hrs Visit/Seminar 3 hrs
Self-study Hours: 61 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Assig’ts /
Exercise
Lab /
Workshop/
Activity
Project Learning
Journal Project
a MILO 1
b MILO 2
c MILO 3
d MILO 4
3 Assessment
a No. of assessment(s) 4 - - - 1
b Weighting as a % of module mark
50% - - - 50%
4 End-of-Module Assessment (EA)
a Duration of EA Last 24 hours
b Distribution of marks 15% Needs/problem identification and analysis 15% Ideas generation 20% Presentation and reflection
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 205
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code/Title DES4007 / Cultural Studies
b Programme Code/Title DE114306 / HD in Costume Design for Performance
c QF Credits 15
d QF Level of Module 4
e Notional Learning Hours (total)
150
f Notional Learning Hours, comprising of
Contact Hours: 52 hrs
Lecture 12 hrs Tutorial 32 hrs Workshop/Lab - hrs Visit/Seminar 8 hrs
Self-study Hours: 98 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Assig’ts / Exercise
Lab / Workshop/
Activity Project
Learning Journal
Project
a MILO 1
b MILO 2
c MILO 3
d MILO 4
3 Assessment
a No. of assessment 2 - - - 1
b Weighting as a % of module mark
40% - - - 60%
4 End-of-Module Assessment (EA)
a Duration of EA Last 20 hours
b Distribution of marks 15% Field and Secondary Research 30% Analysis and Interpretation 15% Presentation
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 206
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code/Title FID4225/ Advanced Fashion Workshop: Draping and Modelling
b Programme Code/Title DE114306 / HD in Costume Design for Performance
c QF Credits 15
d QF Level of Module 4
e Notional Learning Hours (total)
150
f Notional Learning Hours, comprising of
Contact Hours: 65 hrs
Lecture 12 hrs Tutorial 9 hrs Workshop/Lab 44 hrs Visit/Seminar hrs
Self-study Hours: 85 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Assig’ts / Exercise
Lab / Workshop/
Activity Project
Learning Journal
Project
a MILO 1
b MILO 2
c MILO 3
3 Assessment
a No. of assessment 2 - - - 1
b Weighting as a % of module mark
50% - - - 50%
4 End-of-Module Assessment (EA)
a Duration of EA Last 4 Weeks
b Distribution of marks 10% Draping Methods 10% Fitting 30% Construction techniques
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 207
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code/Title FID4204 / Advanced Millinery and Headgear Studio
b Programme Code/Title DE114306 / HD in Costume Design for Performance
c QF Credits 12
d QF Level of Module 4
e Notional Learning Hours (total)
120
f Notional Learning Hours, comprising of
Contact Hours: 52 hrs
Lecture 6 hrs Tutorial 12 hrs Workshop/Lab 34 hrs Visit/Seminar - hrs
Self-study Hours: 68 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Assig’ts / Exercise
Lab / Workshop/
Activity Project
Learning Journal
Project
a MILO 1
b MILO 2
c MILO 3
d MILO 4
3 Assessment
a No. of assessment - 1 - - 1
b Weighting as a % of module mark
- 60% - - 40%
4 End-of-Module Assessment (EA)
a Duration of EA Last 8 weeks
b Distribution of marks 10% on Design and Creation 20% on Construction Techniques. 10% 0n Presentation skills
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 208
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code/Title FID4197 / Character Costume Design
b Programme Code/Title DE114306 / HD in Costume Design for Performance
c QF Credits 7
d QF Level of Module 4
e Notional Learning Hours (total)
70
f Notional Learning Hours, comprising of
Contact Hours: 26 hrs
Lecture 14 hrs Tutorial 12 hrs Workshop/Lab - hrs Visit/Seminar - hrs
Self-study Hours: 44hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
Weightings EA
Assig’ts / Exercise
Lab / Workshop/
Activity Project
Learning Journal
Project
a MILO 1
b MILO 2
c MILO 3
d MILO 4
3 Assessment
a No. of assessment 2 - - - 1
b Weighting as a % of module mark
50% - - - 50%
4 End-of-Module Assessment (EA)
a Duration of EA Last 5 Weeks
b Distribution of marks 20% on Field Research 20% on Analysis and Interpretation 10% on Presentation
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 209
Module Assessment Scheme [AY2019/20]
1 Module Details a Module Code / Title FID4200 / Collaboration Project
b Programme Code / Title
DE114306 / HD in Costume Design for Performance
c QF Credits 7 d QF Level of Module 4
e Notional Learning Hours (total) 70
f Notional Learning Hours, comprising of
Contact Hours: 26 hrs
Lecture 4 hrs Tutorial 4 hrs Workshop/Lab 18 hrs Visit/Seminar - hrs
Self-study Hours: 44 hrs Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA Assig’ts / Exercise
Lab / Workshop Project Learning
Journal Project
a MILO 1 b MILO 2 c MILO 3 3 Assessment a No. of assessment - - 1 - 1
b Weighting as a % of module mark - - 50% - 50%
4 End of Module Assessment (EA)
a Duration of EA 4 Weeks
b Distribution of marks 20% research skills 25% Design and Production 5% Presentation skills
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 210
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code/Title FID3077/ Costume Construction
b Programme Code/Title DE114306 / HD in Costume Design for Performance
c QF Credits 10
d QF Level of Module 3
e Notional Learning Hours (total)
100
f Notional Learning Hours, comprising of
Contact Hours*: 52 hrs
Lecture 6 hrs Tutorial 9 hrs Workshop/Lab 37 hrs Visit/Seminar - hrs
Self-study Hours: 48 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Assig’ts / Exercise
Lab / Workshop/
Activity Project
Learning Journal
Project
a MILO 1
b MILO 2
c MILO 3
3 Assessment
a No. of assessment 2 - - - 1
b Weighting as a % of module mark
50% - - - 50%
4 End-of-Module Assessment (EA)
a Duration of EA Last 5 Weeks
b Distribution of marks 20% on Field Research 20% on Analysis and Interpretation 10% on Presentation
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 211
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code/Title FID3070 / Costume Drawings
b Programme Code / Title DE114306 / HD in Costume Design for Performance
c QF Credits 7
d QF Level of Module 3
e Notional Learning Hours (total)
70
f Notional Learning Hours, comprising of
Contact Hours: 39 hrs
Lecture 12 hrs Tutorial 6 hrs Workshop/Lab 21 hrs Visit/Seminar - hrs
Self-study Hours: 31 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Assig”ts/ Exercise
Lab/ Workshop
Project Learning Journal
Project
a MILO 1
b MILO 2
c MILO 3
d MILO 4
3 Assessment
a No. of assessment 1 - - - 1
b Weighting as a % of module mark
50% - - - 50%
4 End-of-Module Assessment (EA)
a Duration of EA Last 4 Weeks
b Distribution of marks
15% Research 10% Design ideas 20% on Technical skills 5% Presentation
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 212
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code/Title FID3073 / Costume History and Evolution
b Programme Code / Title DE114306 / HD in Costume Design for Performance
c QF Credits 10
d QF Level of Module 3
e Notional Learning Hours (total)
100
f Notional Learning Hours, comprising of
Contact Hours: 39 hrs
Lecture 20 hrs Tutorial 9 hrs Workshop/Lab 10 hrs Visit/Seminar - hrs
Self-study Hours: 61 hrs
Assessment Hours: - hrs (Outside Contact/Self-study
Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Assig”ts/ Exercise
Lab/ Worksho
p Project
Learning Journal
Project
a MILO 1
b MILO 2
c MILO 3
d MILO 4
3 Assessment
a No. of assessment 1 - - - 1
b Weighting as a % of module mark
50% - - - 50%
4 End-of-Module Assessment (EA)
a Duration of EA Last 4 Weeks
b Distribution of marks
20% on Research 10% on Creation 15% on Technical 5% on Presentation
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 213
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code/Title FID4205 / Costume Technology
b Programme Code/Title DE114306 / HD in Costume Design for Performance
c QF Credits 12
d QF Level of Module 4
e Notional Learning Hours (total)
120
f Notional Learning Hours, comprising of
Contact Hours: 52 hrs
Lecture 6 hrs Tutorial 9 hrs Workshop/Lab 37 hrs Visit/Seminar - hrs
Self-study Hours: 68 hrs
Assessment Hours: -hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Assig’ts / Exercise
Lab / Workshop/
Activity Project
Learning Journal
Project
a MILO 1
b MILO 2
c MILO 3
d MILO 4
3 Assessment
a No. of assessment 1 - - - 1
b Weighting as a % of module mark
50% - - - 50%
4 End-of-Module Assessment (EA)
a Duration of EA Last 4 Weeks
b Distribution of marks
15% on Pattern Construction 15% on Sewing Techniques 10% on Fitting and Alteration Process 10% on Production Process
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 214
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code/Title FID4202 / Critical Practice for Costume Design
b Programme Code / Title DE114306 / HD in Costume Design for Performance
c QF Credits 7
d QF Level of Module 4
e Notional Learning Hours (total)
70
f Notional Learning Hours, comprising of
Contact Hours: 26 hrs
Lecture 8 hrs Tutorial 15 hrs Workshop/Lab - hrs Visit/Seminar 3 hrs
Self-study Hours: 44 hrs
Assessment Hours: - hrs (Outside Contact/Self-study
Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Assig’ts / Exercise
Lab / Workshop Project
Learning Journal
Project
a MILO 1
b MILO 2
c MILO 3
d MILO 4
3 Assessment
a No. of assessment - - - 1 1
b Weighting as a % of module mark
- - - 50% 50%
4 End-of-Module Assessment (EA)
a Duration of EA Last 4 Weeks
b Distribution of marks
10% on Research 20% on Creation 10% on Technical skills 10% on Presentation
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 215
Module Assessment Scheme [AY 2019/20]
1 Module Details
a Module Code/Title FID4037 / Fashion Plus: Industry Processes
b Programme Code / Title DE124301/ HD in Fashion Design
c QF Credits 12
d QF Level of Module 4
e Notional Learning Hours (total)
120
f Notional Learning Hours, comprising of
Contact Hours: 52 hrs
Lecture 4 hrs Tutorial 4 hrs Workshop/Lab 40 hrs Visit/Seminar 4 hrs
Self-study Hours: 68 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Assig’ts / Exercise
Lab / Workshop Project
Learning Journal
Assignment
a MILO 1
b MILO 2
c MILO 3
3 Assessment
a No. of assessment 1 - - - 1
b Weighting as a % of module mark
60% - - - 40%
4 End-of-Module Assessment (EA)
a Duration of EA Last 2 weeks
b Distribution of marks 40% Assignment
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 216
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code/Title FID4193 / Fundamental Costume Design
b Programme Code/Title DE114306 / HD in Costume Design for Performance
c QF Credits 7
d QF Level of Module 4
e Notional Learning Hours (total)
70
f Notional Learning Hours, comprising of
Contact Hours: 26 hrs
Lecture 18 hrs Tutorial 8 hrs Workshop/Lab - hrs Visit/Seminar - hrs
Self-study Hours: 44 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Assig’ts / Exercise
Lab / Workshop/
Activity Project
Learning Journal
Project
a MILO 1
b MILO 2
c MILO 3
d MILO 4
3 Assessment
a No. of assessment 2 - - - 1
b Weighting as a % of module mark
50% - - - 50%
4 End-of-Module Assessment (EA)
a Duration of EA Last 5 Weeks
b Distribution of marks 20% on Field Research 20% on Analysis and Interpretation 10% on Presentation
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 217
Module Assessment Scheme [AY2019/20]
1 Module Details a Module Code / Title FID3075 / Introduction to Stage Hair Design
b Programme Code / Title
DE114306 / HD in Costume Design for Performance
c QF Credits 7 d QF Level of Module 3
e Notional Learning Hours (total) 70
f Notional Learning Hours, comprising of
Contact Hours: 39 hrs
Lecture 10 hrs Tutorial 4 hrs Workshop/Lab 25 hrs Visit/Seminar - hrs
Self-study Hours: 31 hrs Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA Assig’ts / Exercise
Lab / Workshop Project Learning
Journal Project
a MILO 1
b MILO 2
c MILO 3
3 Assessment a No. of assessment - 1 1 - 1
b Weighting as a % of module mark - 20% 30% - 50%
4 End of Module Assessment (EA)
a Duration of EA Nil
b Distribution of marks 10% Presentation 40% Project
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 218
Module Assessment Scheme [AY2019/20]
1 Module Details a Module Code / Title FID4227 / Introduction to Stage Make-up
b Programme Code / Title
DE114306 / HD in Costume Design for Performance
c QF Credits 10 d QF Level of Module 3
e Notional Learning Hours (total) 100
f Notional Learning Hours, comprising of
Contact Hours: 52 hrs
Lecture 13 hrs Tutorial 12 hrs Workshop/Lab 27 hrs Visit/Seminar - hrs
Self-study Hours: 48 hrs Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA Assig’ts / Exercise
Lab / Workshop Project Learning
Journal Project
a MILO 1 b MILO 2
c MILO 3
d MILO 4
3 Assessment a No. of assessment - 1 1 - 1
b Weighting as a % of module mark - 20% 30% - 50%
4 End of Module Assessment (EA)
a Duration of EA 4 Weeks
b Distribution of marks
10% Research skills 10% Design and Creation 25% Technical reproduction 5% Presentation Skills
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 219
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code/Title FID3074 / Materials for Stage Performance
b Programme Code/Title DE114306 / HD in Costume Design for Performance
c QF Credits 6
d QF Level of Module 3
e Notional Learning Hours (total)
60
f Notional Learning Hours, comprising of
Contact Hours: 26 hrs
Lecture 6 hrs Tutorial 4 hrs Workshop/Lab 16 hrs Visit/Seminar - hrs
Self-study Hours: 34 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Assig’ts / Exercise
Lab / Workshop/
Activity Project
Learning Journal
Project
a MILO 1
b MILO 2
c MILO 3
d MILO 4
3 Assessment
a No. of assessment - 1 - - 1
b Weighting as a % of module mark
- 60% - - 40%
4 End-of-Module Assessment (EA)
a Duration of EA Last 6 weeks
b Distribution of marks 10% on Design and Creation 15% on Visualization Techniques. 15% 0n Presentation skills
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 220
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code/Title FID4206 / Millinery and Headgear Studio
b Programme Code/Title DE114306 / HD in Costume Design for Performance
c QF Credits 6
d QF Level of Module 4
e Notional Learning Hours (total)
60
f Notional Learning Hours, comprising of
Contact Hours: 26 hrs
Lecture 6 hrs Tutorial 4 hrs Workshop/Lab 16 hrs Visit/Seminar - hrs
Self-study Hours: 34 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Assig’ts / Exercise
Lab / Workshop/
Activity Project
Learning Journal
Project
a MILO 1
b MILO 2
c MILO 3
d MILO 4
3 Assessment
a No. of assessment - 1 - - 1
b Weighting as a % of module mark
- 60% - - 40%
4 End-of-Module Assessment (EA)
a Duration of EA Last 6 weeks
b Distribution of marks 10% on Design and Creation 20% on Construction Techniques. 10% 0n Presentation skills
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 221
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code/Title FID4153 / Portfolio Development
b Programme Code / Title DE114306 / HD in Costume Design for Performance
c QF Credits 7
d QF Level of Module 4
e Notional Learning Hours (total)
70
f Notional Learning Hours, comprising of
Contact Hours: 26 hrs
Lecture 12 hrs Tutorial 14 hrs Workshop/Lab hrs Visit/Seminar hrs
Self-study Hours: 44 hrs
Assessment Hours: - hrs (Outside Contact/Self-study
Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Assig’ts / Exercise
Lab / Workshop Project
Learning Journal
Project
a MILO 1
b MILO 2
c MILO 3
d MILO 4
3 Assessment
a No. of assessment 2 - - - 1
b Weighting as a % of module mark
50% - - - 50%
4 End-of-Module Assessment (EA)
a Duration of EA Last 6 Weeks
b Distribution of marks 20% Research 20%on Analysis 10% on Presentation
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 222
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code/Title FID4043 /Expanded Studies: Advanced Costumes Workshop
b Programme Code/Title DE114306 / HD in Costume Design for Performance
c QF Credits 6
d QF Level of Module 4
e Notional Learning Hours (total)
60
f Notional Learning Hours, comprising of
Contact Hours: 26 hrs
Lecture 3 hrs Tutorial 3 hrs Workshop/Lab 20 hrs Visit/Seminar - hrs
Self-study Hours: 34 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Assig’ts / Exercise
Lab / Workshop/
Activity Project
Learning Journal
Project
a MILO 1
b MILO 2
c MILO 3
d MILO 4
3 Assessment
a No. of assessment 1 - - - 1
b Weighting as a % of module mark
50% - - - 50%
4 End-of-Module Assessment (EA)
a Duration of EA Last 4 Weeks
b Distribution of marks 10% on Creation 30% on Technical skills 10% on Presentation
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 223
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code/Title FID4196 / Expanded Studies: Costume Design Project
b Programme Code/Title DE114306 / HD in Costume Design for Performance
c QF Credits 7
d QF Level of Module 4
e Notional Learning Hours (total)
70
f Notional Learning Hours, comprising of
Contact Hours: 26 hrs
Lecture 14 hrs Tutorial 12 hrs Workshop/Lab - hrs Visit/Seminar - hrs
Self-study Hours: 44 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Assig’ts / Exercise
Lab / Workshop/
Activity Project
Learning Journal
Project
a MILO 1
b MILO 2
c MILO 3
d MILO 4
3 Assessment
a No. of assessment 2 - - - 1
b Weighting as a % of module mark
50% - - - 50%
4 End-of-Module Assessment (EA)
a Duration of EA Last 6 Weeks
b Distribution of marks 20% on Field Research 20% on Analysis and Interpretation 10% on Presentation
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 224
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code/Title FID4042 / Expanded Studies: Costumes Workshop
b Programme Code/Title DE114306 / HD in Costume Design for Performance
c QF Credits 6
d QF Level of Module 4
e Notional Learning Hours (total)
60
f Notional Learning Hours, comprising of
Contact Hours: 26 hrs
Lecture 6 hrs Tutorial 2 hrs Workshop/Lab 18 hrs Visit/Seminar - hrs
Self-study Hours: 34 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Assig’ts / Exercise
Lab / Workshop/
Activity Project
Learning Journal
Project
a MILO 1
b MILO 2
c MILO 3
c MILO 4
3 Assessment
a No. of assessment 2 - - - 1
b Weighting as a % of module mark
60% - - - 40%
4 End-of-Module Assessment (EA)
a Duration of EA Last 4 Weeks
b Distribution of marks 5% on Creation 30% on Technical skills 5% on Presentation
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 225
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code / Title FID3072 / Expanded Studies: Experiential Project for Costume
b Programme Code / Title
DE114306 / HD in Costume Design for Performance
c QF Credits 2 d QF Level of Module 3
e Notional Learning Hours (total) 20
f Notional Learning Hours, comprising of
Contact Hours: 13 hrs
Lecture 2 hrs Tutorial 2 hrs Workshop/Lab 9 hrs Visit/Seminar - hrs
Self-study Hours: 7 hrs Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA Assig’ts / Exercise
Lab / Workshop Project Learning
Journal Project
a MILO 1
b MILO 2
c MILO 3
d MILO 4
e MILO 5 3 Assessment a No. of assessment - 1 - - 1
b Weighting as a % of module mark - 50% - - 50%
4 End of Module Assessment (EA)
a Duration of EA 4 Weeks
b Distribution of marks 20% Research 20% Design Interpretation 10% Presentation
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 226
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code/Title FID4201 / Expanded Studies: Props and Accessories Studio
b Programme Code/Title DE114306 / HD in Costume Design for Performance
c QF Credits 6
d QF Level of Module 4
e Notional Learning Hours (total)
60
f Notional Learning Hours, comprising of
Contact Hours: 26 hrs
Lecture 8 hrs Tutorial 4 hrs Workshop/Lab 14 hrs Visit/Seminar - hrs
Self-study Hours: 34 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Assig’ts / Exercise
Lab / Workshop/
Activity Project
Learning Journal
Project
a MILO 1
b MILO 2
c MILO 3
3 Assessment
a No. of assessment 2 - - - 1
b Weighting as a % of module mark
50% - - - 50%
4 End-of-Module Assessment (EA)
a Duration of EA Last 6 Weeks
b Distribution of marks 15% on Research and Analysis 25% on Interpretation (design and making) 10% on Final Presentation
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 227
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code/Title FID4203 / Graduation Costume Project
b Programme Code/Title
DE114306/HD in Costume Design for Performance
c QF Credits 30
d QF Level of Module 4
e Notional Learning Hours (total) 300
f Notional Learning Hours, comprising of
Contact Hours: 78 hrs
Lecture 12 hrs
Tutorial 36 hrs
Workshop/Lab 30 hrs
Visit/Seminar - hrs
Self-study Hours: 222 hrs
Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Assig’ts /
Exercise
Lab / Work -shop/ Activity
Project (Stage 1:
Project Brief & Research,
Stage 2: Design Development &
Solution)
Learning Journal
Project (Stage 3: Realizatio
n)
a MILO 1
b MILO 2
c MILO 3
d MILO 4
3 Assessment
a No. of assessment - - 2 - 1
b Weighting as a % of module mark - - 50% - 50%
4 End-of-Module Assessment (EA)
a Duration of EA Last 4 weeks (24hrs)
b Distribution of marks
10% Research Skills 15% Design and Creation 15% Technical Production 10% Presentation
5 Any Special Assessment Requirement
Nil
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 1
Volume B - Programme Information & Module Syllabuses 228
Module Assessment Scheme [AY2019/20]
1 Module Details
a Module Code / Title DES4901M / Industrial Attachment b Programme Code / Title DE114306 / HD in Costume Design for Performance c QF Credits 10 IA credits # d QF Level of Module 4
e Notional Learning Hours (total) 103
f Notional Learning Hours, comprising of
Contact Hours: 13 hrs (Coaching and Student Support Activities ^)
Lecture 7 hrs
Coaching 6 hrs
Work Attachment: min 90 hrs Self-study Hours: - hrs Assessment Hours: - hrs (Outside Contact/Self-study Hours)
2 Module Intended Learning Outcome (MILO)
Module Assessment in alignment with MILO (*Please indicate the assessment mode for each MILO by ticking () the appropriate box(es))
CA components EA
Performance Evaluation by Industry Mentor
IA Report and Presentation
a MILO 1
b MILO 2
c MILO 3
d MILO 4
e MILO 5
3 Assessment a No. of assessment 1 1
b Weighting as a % of module mark 50% 50%
4 End-of-Module Assessment (EA)
a Duration of EA Within 4 weeks upon completion of industrial placement/project
b Distribution of marks N/A
5 Any Special Assessment Requirement
Nil
Notes: # Attaining a pass in the Industrial Attachment module is a graduation requirement. The module is assessed
on a pass/fail basis and carries10 IA credits. ^ Coaching and student support activities may include, among others, pre-attachment orientation, workshop, seminars, talks by employers and alumni, visits by module lecturers during attachment, post attachment presentation and self-reflection sessions.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306) Appendix 2
Volume B - Programme Information & Module Syllabuses 229
APPENDIX 2 – Comparison of Revised Programme against Existing Programme
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306 Appendix 2
Volume B - Programme Information & Module Syllabuses 230
Comparison of Revised Programme - HD in Costume Design for Performance against Exiting Programme - HD in Costume Design for Performance
Different categories of revisions are highlighted with differentiated colors:
Embedment of new elements / adjustment of focuses in response to industry need Updated General Education (GE) modules and delivery sequences as proposed by GE Module Boards
Study load evened out / delivery sequence reallocated for better learning progression Revised semester and programme total credit values, curriculum hours, and related values
Subsumed previous Design Plus module contents Others – Replacement of the sequential numbers in the module titles with more descriptive terms
Revised HD in Costume Design for Performance Existing HD in Costume Design for Performance
Module
Code Module Title
QF Level
Contact Hours#
Self-
study Hours#
Assess
-ment Hours#
Total NLHs#
QF
Credits~
Module
Code Module Title
QF Level
Contact Hours#
Self-
study Hours#
Assess
-ment Hours#
Total NLHs#
QF
Credits~
Semester 1 Semester 1 LAN3100*1 English and Communication:
Workplace Interaction 3 26 34 - 60 6 LAN3100*1 English and Communication:
Workplace Interaction 3 26 34 - 60 6
SDD4006*1 Collaboration, Teamwork & Social Engagement
4 26 34 - 60 6 SDD4001*1 Whole Person Development: Self-efficacy Enhancement
4 26 34 - 60 6
ITE3003*1 Information Technology Essentials – Design
3 26 39 - 65 6 ITE3003*1 Information Technology Essentials – Design
3 26 39 - 65 6
DES3006*1 Creative and Design Thinking 3 39 61 - 100 10
DES4007*1 Cultural Studies 4 52 98 - 150 15
FID3077 Costume Construction 3 52 48 - 100 10 FID3071 Costume Technology I 3 52 48 - 100 10
FID3070 Costume Drawings 3 39 31 - 70 7 FID3070 Costume Drawings 3 39 31 - 70 7
FID4193 Fundamental Costume Design
4 26 44 - 70 7 FID4193 Fundamental Costume Design
4 26 44 - 70 7
FID3072 Expanded Studies: Experiential Project for Costume
3 13 7 - 20 2 FID3072 Expanded Studies: Experiential Project for Costume
3 13 7 - 20 2
Sem 1 Total^: 247 298 - 545 54 Sem 1 Total^: 260 335 - 595 59
Nominal Duration for Sem 1: 13 weeks Nominal Duration for Sem 1: 13 weeks
Estimated Study Load for Sem 1^: 41.9 NLHs per week Estimated Study Load for Sem 1^: 45.8 NLHs per week
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306 Appendix 2
Volume B - Programme Information & Module Syllabuses 231
Revised HD in Costume Design for Performance Existing HD in Costume Design for Performance
Module
Code Module Title
QF Level
Contact Hours#
Self-
study Hours#
Assess
-ment Hours#
Total NLHs#
QF
Credits ~
Module
Code Module Title
QF Level
Contact Hours#
Self-
study Hours#
Assess
-ment Hours#
Total NLHs#
QF
Credits~
Semester 2 Semester 2
LAN3003*1 職業中文傳意︰ 普通話對話 與匯報 Vocational Chinese Communication : Putonghua Conversation and Reports
3 26 34 - 60 6 LAN3003*1 職業中文傳意︰ 普通話對話
與匯報 Vocational Chinese Communication : Putonghua Conversation and Reports
3 26 34 - 60 6
LAN3103*1 English and Communication: Workplace Correspondence
3 26 34 - 60 6 LAN3103*1 English and Communication: Workplace Correspondence
3 26 34 - 60 6
SDD4005M*1,*2 MindShift: Achieving Personal Growth & Effectiveness
4 13 17 - 30 3 SDD4003 Whole Person Development: SMART in Action
4 13 17 - 30 3
SDD4004 Whole Person Development: Integrated Career Development
4 13 17 - 30 3
DES4007*1 Cultural Studies 4 52 98 - 150 15
DES3004*1 Creative Thinking 3 39 61 - 100 10
FID3073 Costume History and Evolution 3 39 61 - 100 10 FID3073 Costume History and Evolution
3 39 61 - 100 10
FID4205 Costume Technology 4 52 68 - 120 12 FID4194 Costume Technology II 4 52 68 - 120 12
FID3074 Materials for Stage Performance 3 26 34 - 60 6 FID3074 Materials for Stage Performance
3 26 34 - 60 6
FID4206 Millinery and Headgear Studio 4 26 34 - 60 6 FID4195 Millinery and Headgear Studio I
4 26 34 - 60 6
FID4042 Expanded Studies: Costumes Workshop
4 26 34 - 60 6 FID4158 Expanded Studies: Costume Workshop I
4 26 34 - 60 6
Sem 2 Total^: 286 414 - 700 70 Sem 2 Total^: 286 394 - 680 68
Nominal Duration for Sem 2: 13 weeks Nominal Duration for Sem 2: 13 weeks
Estimated Study Load for Sem 2^: 53.8 NLHs per week Estimated Study Load for Sem 2^: 52.3 NLHs per week
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306 Appendix 2
Volume B - Programme Information & Module Syllabuses 232
Revised HD in Costume Design for Performance Existing HD in Costume Design for Performance
Module
Code Module Title
QF Level
ContactHours#
Self-
study Hours#
Assess
-ment Hours#
Total NLHs#
QF
Credits~
Module
Code Module Title
QF Level
Contact Hours#
Self-
study Hours#
Assess
-ment Hours#
Total NLHs#
QF
Credits~
Semester 3 Semester 3
LAN4108 English and Communication: Persuasive Presentations
4 26 64 - 90 9 LAN4108 English and Communication: Persuasive Presentations
4 26 64 - 90 9
SDD4005M*1,*2 MindShift: Achieving Personal Growth & Effectiveness
4 13 17 - 30 3 SDD4002 Whole Person Development:
Global Vision
4 13 17 - 30 3
DES4008*1 Aesthetics and Semiotics 4 39 71 - 110 11 DES4008*1 Aesthetics and Semiotics 4 39 71 - 110 11
FID3075 Introduction to Stage Hair Design
3 39 31 - 70 7 FID3075 Introduction to Stage Hair Design
3 39 31 - 70 7
FID4043 Expanded Studies: Advanced Costumes Workshop
4 26 34 - 60 6 FID4160 Expanded Studies: Costume Workshop II
4 26 34 - 60 6
FID4196 Expanded Studies: Costume Design Project
4 26 44 - 70 7 FID4196 Expanded Studies: Costume Design Project
4 26 44 - 70 7
Varied*2 Enrichment Module 3 26 34 - 60 6 Varied Enrichment Module 3 26 34 - 60 6
Sem 3 Total^: 195 295 - 490 49 Sem 3 Total^: 195 295 - 490 49
Nominal Duration for Sem 3: 7 weeks Nominal Duration for Sem 3: 9 weeks
Estimated Study Load for Sem 3^ : 70 NLHs per week Estimated Study Load for Sem 3^ : 54.4 NLHs per week
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306 Appendix 2
Volume B - Programme Information & Module Syllabuses 233
Revised HD in Costume Design for Performance Existing HD in Costume Design for Performance
Module
Code Module Title
QF Level
Contact Hours#
Self-
study Hours#
Assess
-ment Hours#
Total NLHs#
QF
Credits~
Module
Code Module Title
QF Level
Contact Hours#
Self-
study Hours#
Assess
-ment Hours#
Total NLHs#
QF
Credits~
Semester 4 Semester 4
LAN4002 職業中文傳意︰普通話報告
與推介文書
Vocational Chinese Communication : Putonghua Presentations and Promotional Text Writing
4 26 64 - 90 9 LAN4002 職業中文傳意︰普通話報告
與推介文書
Vocational Chinese Communication : Putonghua Presentations and Promotional Text Writing
4 26 64 - 90 9
LAN4107 English and Communication: Reports
4 26 64 - 90 9 LAN4107 English and Communication: Reports
4 26 64 - 90 9
FID4225 Advanced Fashion Workshop: Draping and Modelling
4 65 85 - 150 15 FID4199 Advanced Fashion Workshop: Draping and Modelling
4 52 68 - 120 12
FID4204 Advanced Millinery and Headgear Studio
4 52 68 - 120 12 FID4198 Millinery and Headgear Studio II
4 39 51 - 90 9
FID4197 Character Costume Design 4 26 44 - 70 7 FID4197 Character Costume Design 4 26 44 - 70 7
FID4200 Collaboration Project 4 26 44 - 70 7 FID4200 Collaboration Project 4 26 44 - 70 7
DES4017 Design Plus: Presentation and Communication Practice
4 39 51 - 90 9
FID4227 Introduction to Stage Make-up
3 52 48 - 100 7 FID3076 Introduction to Stage Make-up
3 39 31 - 70 7
Sem 4 Total^: 273 417 - 690 69 Sem 4 Total^: 273 417 - 690 69
Nominal Duration for Sem 4: 13 weeks Nominal Duration for Sem 4: 13 weeks
Estimated Study Load for Sem 4^: 53.1 NLHs per week Estimated Study Load for Sem 4^: 53.1 NLHs per week
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306 Appendix 2
Volume B - Programme Information & Module Syllabuses 234
Revised HD in Costume Design for Performance Existing HD in Costume Design for Performance
Module
Code Module Title
QF Level
Contact Hours#
Self-
study Hours#
Assess
-ment Hours#
Total NLHs#
QF
Credits~
Module
Code Module Title
QF Level
Contact Hours#
Self-
study Hours#
Assess
-ment Hours#
Total NLHs#
QF
Credits~
Semester 5 Semester 5
LAN4101 English and Communication: Promotional Materials
4 39 61 - 100 10 LAN4101 English and Communication: Promotional Materials
4 39 61 - 100 10
SDD4007
Enhancing Competencies in the 21st Century Workplace
4 13 17 - 30 3
FID4202 Critical Practice for Costume Design
4 26 44 - 70 7 FID4202 Critical Practice for Costume Design
4 26 44 - 70 7
FID4037 Fashion Plus: Industry Processes
4 52 68 - 120 12 DES4020 Design Plus: Industry Processes
4 52 68 - 120 12
FID4153 Portfolio Development 4 26 44 - 70 7 FID4153 Portfolio Development 4 26 44 - 70 7
FID4201 Expanded Studies: Props and Accessories Studio
4 26 34 - 60 6 FID4201 Expanded Studies: Props and Accessories Studio
4 26 34 - 60 6
FID4203 Graduation Costume Project 4 78 222 - 300 30 FID4203 Graduation Costume Project 4 78 222 - 300 30
Sem 5 Total^: 260 490 - 750 75 Sem 5 Total^: 247 473 - 720 72
Nominal Duration for Sem 5: 13 weeks Nominal Duration for Sem 5: 13 weeks
Estimated Study Load for Sem 5^: 57.7 NLHs per week Estimated Study Load for Sem 5^: 55.4 NLHs per week
Grand Total for 5 Semesters^: 1261 1914 - 3175 317 Grand Total for 5 Semesters^: 1261 1914 - 3175 317
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306 Appendix 2
Volume B - Programme Information & Module Syllabuses 235
Industrial Attachment (IA)@ Industrial Attachment (IA)@
Module
Code
Module
Title
QF
Level Total NLHs#
QF
Credits^
Module
Code
Module
Title
QF
Level Total NLHs#
QF
Credits^
DES4901M Industrial
Attachment 4
90 attachment hours minimum
+ 13 hours for coaching, preparation, etc.
= 103
10 DES4901M Industrial
Attachment 4
90 attachment hours minimum
+ 13 hours for coaching, preparation, etc.
= 103
10
Students of this programme will be scheduled to take Industrial Attachment (IA) in Semesters 2 to
5, considering the readiness of the students, the skills requirement, availability of IA opportunities,
and the overall study load of each semester.
Students of this programme will be scheduled to take Industrial Attachment (IA) in Semesters 2 to
5, considering the readiness of the students, the skills requirement, availability of IA opportunities,
and the overall study load of each semester.
Note (Full-time Mode):
* 1 In order to attain the Diploma in Design, students have to complete and acquire: a) totally 30 credits in five General Education Modules, including:
LAN3100 / English and Communication: Workplace Interaction (6 credits) SDD4005 / SDD4005M / MindShift: Achieving Personal Growth & Effectiveness (6 credits) or
SDD4006 / SDD4006M / Collaboration, Teamwork & Social Engagement (6 credits) ITE3003 / Information Technology Essentials – Design (6 credits) or
ITE3005 / Information Technology Essentials – Media (6 credits) or ITE3009 / Information Technology Essentials – Smart Living (6 credits)
LAN3003 / Vocational Chinese Communication: Putonghua Conversation and Reports 職業中文傳意:普通話對話與匯報(6 credits) LAN3103 / English and Communication: Workplace Correspondence (6 credits)
b) minimum 90 credits in Vocational Modules, including: DES3006 / Creative and Design Thinking (10 credits) DES4007 / Cultural Studies (15 credits) DES4008 / Aesthetics and Semiotics (11 credits) Plus any other vocational modules offered in the student’s enrolled programme/stream, accumulating to 54 Credits or above.
* 2 SDD4005M / MindShift Achieving Personal Growth & Effectiveness is a “year-long module” (a “year-long module” in the VTC system may span across two or more semesters) to be delivered
across two semesters from Semester 2 to Semester 3. The break down values of this module (Contact Hours, Self-study Hours, Assessment Hours, Total NLHs and QF Credits) shown in Semester 2 and 3 are for the proportionate calculation of Semester Total and Estimated Study Load only. The total QF Credits of the module is 6 which is presented as 3 in Semester 2 and 3 in Semester 3.
Fashion and Image Design Programme Board Higher Diploma in Costume Design for Performance (DE114306 Appendix 2
Volume B - Programme Information & Module Syllabuses 236
* 3 A variety of Enrichment Modules, offered by different disciplines of HKDI / IVEs, are open to all Higher Diploma students irrespective of the Discipline, programme or stream, upon meeting the pre-requisites / co-requisites / anti-requisites, if any. These Enrichment Modules may vary in QF Level, Self-study Hours, Assessment Hours, Total NLHs and QF Credits. Successful completion of one Enrichment Module is a graduation requirement.
# The Notional Learning Hours (NLHs) of a Module is the amount of time an average learner would take to complete all the learning and acquire the learning outcomes. The Notional Learning Hours is a summation of contact hours, self-study hours and assessment hours of a programme/module. Contact hours are the amount of time spent by a student in direct contact with the teaching staff of a programme. Self-study hours are the amount of time spent by a student without direct contact with teaching staff. Assessment hours refer to the amount of time spent by a student in scheduled examinations, tests and other related assessment activities outside contact and self-study hours. Some assessments may already be included in contact hours (e.g. quiz conducted in class) and self-study hours (e.g. students’ time spent on doing a project) and should not be double-counted.
~ The QF Credits of a module is proportional to the number of Notional Learning Hours that an average learner would take to acquire the learning outcomes stated in the module. One QF Credit is equivalent to 10 Notional Learning Hours in studying a module. In the table, the QF Credits are rounded down by module if they are in decimal. Adult learners are in general more mature and motivated than school leavers on pre-employment programmes, and in general possess a certain amount of work experience. Therefore for the same total amount of learning, the proportion of contact hours to self-study hours to achieve the same learning outcomes may be different for pre-employment students and in-service adult learners.
^ IA has not been included in the above calculations of total NLHs, total credits and estimated study load, as students may undertake IA in different semesters. Still the IA credits taken by students and IA study load in each semester are closely monitored according to prevailing regulations and guidelines.
@ For NHD, while 90 attachment hours are a minimum requirement, IA of individual programmes may include more attachment hours to meet industry requirements. For other types of programmes, the decision of the number of IA hours, if any, rests with the Programme Board.