Unsere Strke:Wir fertigen aus Lagervorrat- Edelstahlkompensatoren von DN 20
bis DN 5000.- Metallschluche aus VA und Bronze
DN 6 bis DN 400.- Linsenkompensatoren aus allen verform-
und schweibaren Sthlen, Gre unbe-grenzt.
- Metallblge fr Armaturen-, Anlagen- undFahrzeugbau.
- Gummikompensatoren von DN 20 bis DN 3600.
- Gummischluche von DN 10 bis DN 300.- Hydraulikschluche von DN 10 bis DN 200.- Spezial-Flansche DN 10 bis DN 5000.- Dampframmen-Schluche.- Offshore-Zubehr.- Abgasschalldmpfer.
In unserem Betrieb knnen Abnahmen allerKlassifikationsgesellschaften durchgefhrtwerden.Wir wrden uns freuen, wenn wir Sie von un-serer Leistungsfhigkeit berzeugen knnten.
Our strenghts:We are manufacturing out of stock- High-grade steel compensators DN 20 to DN
5000 stainless steel.- Metal hoses made from stainless steel and
Bronze DN 6 to DN 400.- lens compensators from all deformable
and weldable steels, size unlimited.
- Metal bellows suitable for the constructionsand vehicles.
- Rubber compensators DN 20 to DN 3600.
- Rubber hoses DN 10 to DN 300.- Hydraulic hoses DN 10 to DN 200.- special-flanges DN 10 - DN 5000.- Pile-Driver-Hoses.- Offshore-Supplies.- Exhaustgassilencer.
In our work approvals of all classifications canbe carried out.
We would appreciate, if we succeed in convin-cing you of our efficiency.
2
Zertifiziert nach ISO 9001Kompensatoren und Schluche mit Zulassung vonDVGW - Germanischer Lloyd - Lloyds Register - BV - DNVCE-Zeichen Druckgerterichtlinie
Certificated according ISO 9001Expansion Joints and Metal-Hoses approvals fromDVGW - Germanischer Lloyd - Lloyds Register - BV - DNVCE Code PED
Amtliche PrfungenUnsere Erzeugnisse knnen bereits im Werk von amtlichen Institutionen (z. B. TV und Klassifika-tionsgesellschaften) abgenommen werden. Das gilt sowohl fr mechanische Prfungen als auchfr die Werkstoffbescheinigungen. Die Kosten hierfr sind jedoch in den Verkaufspreisen norma-lerweise nicht enthalten, da es sich als zweckmig erwiesen hat, da diese Institutionen direktvom Abnehmer beauftragt werden und auch ihre Kosten direkt berechnen.
Official inspectionsOur products can be acceptance tested already in our works by official institutions (e. g. TV [German technical inspection association] and classification societies). This applies both to mechanical tests and to material certificates. However, the costs for this are generally not includedin our sales prices, since it has been found convenient for these institutions to be engaged directlyby the customer, who will pay them directly.
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60
Axial-Kompensatoren/Axial expansion joints
4
Position Nennweiten- Nenndruck- Aus-bereich bereich lenkungs-
DN PN richtung
Position Nominal Nominal Directiondiameter pressure of deflection
range range
1 50 100 axial AN...R/R angular
5000 1 lateral
2 50 100 AF...R/R axial
5000 1
3 50 100 AMF...R/R axial
5000 1
4 50 100 axial AN...B/B angular
5000 1 lateral
5 50 100 AM...B/B axial lateral
5000 1
6 50 200 1 100 axial AA...R/R250 1200 6 40
weitere weitereGren Drcke
auf Anfrage auf Anfrage
Kombinationen von Anschluarten sind mglich, z. B.: einerseits Schweistutzen, andererseits loser Flansch Fr alle Baureihen sind ausfhrlichemit glattem Bund oder einerseits loser Rundflansch gebrdelt, andererseits Schweistutzen. Unterlagen vorhanden.
The combination of end fittings is possible; e. g. weld end on one side, loose flange with flat face on the other side, Detailed technical leaflets isor round flange with flanged end on one side, weld end on the other side. available for all series.
Bezeichnungsbeispiel: AN250/6/a60/R/RTyp sample AN-DN-PN-MOVEMENT-CONNECTION
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60 5
Lateral-Kompensatoren/Lateral expansion joints
Position Nennweiten- Nenndruck- Aus-bereich bereich lenkungs-
DN PN richtung
Position Nominal Nominal Directiondiameter pressure of deflection
range range
7 50 100 lateral RN...F/F in zwei leicht I Ebenen in two
5000 1 directions
8 50 100 lateralRM...F/F leicht II
in zwei Ebenen in two
5000 1 directions
9 50 100 lateral RN...R/R in zwei leicht I Ebenen in two
5000 1 directions
10 50 100 lateral RM...R/R leicht II in zwei Ebenen in two
5000 1 directions
11 50 100 lateral RM...R/R schwer in zwei Ebenen in two
5000 1 directions
Angular-Kompensatoren/Angular expansion joints
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-606
Position Nennweiten- Nenndruck- Aus-bereich bereich lenkungs-
DN PN richtung
Position Nominal Nominal Directiondiameter pressure of deflection
range range
12 50 100 WN...R/R angular
5000 1
13 50 100 angular KN...R/R in zwei Ebenen in two
5000 1 directions
14 50 100 LN...R/R lateral
5000 1
15 50 100 LM...R/R lateral
5000 1
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60 7
Sonderausfhrungen/Special designs
Position Nennweiten- Nenndruck- Aus-bereich bereich lenkungs-
DN PN richtung
Position Nominal Nominal Directiondiameter pressure of deflection
range range
16 nur auf AD...R/RAnfrage
15 5000 only on axialrequest
17 nur auf AX...R/R Axialentlastung/axial balancingAnfrage
100 5000 only on axialrequest
18 nur auf AK...R/R Eckentlastung/angle balancingAnfrage axial
100 5000 only onrequest lateral
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60
Rechteck-Kompensatoren/Rectangle Expansion joints
8
Universal-Rechteck-KompensatorTyp HKS I
Universal-Rectangle-Expansion-JointType HKS I
Rechteck-KompensatorTyp HKS II
Rectangle-Expansion-JointType HKS II 0
,25
0,
5 m
m
Ein
zella
gen
a I D
FL. A.D
a I D
BL
D
b
B B
Axial-Kompensatoren/Axial expansion joints
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60 9
Axial-Kompensatoren/Axial expansion joints
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-6010
ANB/B
Pos. DN Typ Baulnge (mm)1 AN 0100 / 10 / A036 / BB-160 1602 AN 0100 / 10 / A044 / BB-190 1903 AN 0100 / 10 / A054 / BB-220 2204 AN 0125 / 10 / A050 / BB-180 1805 AN 0125 / 10 / A062 / BB-210 2106 AN 0125 / 10 / A074 / BB-250 2507 AN 0150 / 10 / A040 / BB-160 1608 AN 0150 / 10 / A054 / BB-200 2009 AN 0150 / 10 / A080 / BB-270 270
10 AN 0200 / 10 / A054 / BB-170 17011 AN 0200 / 10 / A090 / BB-300 30012 AN 0250 / 10 / A050 / BB-170 17013 AN 0250 / 10 / A070 / BB-210 21014 AN 0250 / 10 / A100 / BB-330 33015 AN 0300 / 10 / A054 / BB-290 29016 AN 0300 / 10 / A070 / BB-270 27017 AN 0300 / 10 / A100 / BB-340 34018 AN 0350 / 10 / A050 / BB-260 26019 AN 0350 / 10 / A080 / BB-300 30020 AN 0350 / 10 / A110 / BB-410 41021 AN 0400 / 10 / A050 / BB-250 25022 AN 0400 / 10 / A100 / BB-350 35023 AN 0400 / 10 / A140 / BB-400 40024 AN 0450 / 10 / A046 / BB-200 20025 AN 0450 / 10 / A100 / BB-340 34026 AN 0450 / 10 / A130 / BB-410 41027 AN 0500 / 10 / A040 / BB-180 18028 AN 0500 / 10 / A100 / BB-310 31029 AN 0500 / 10 / A140 / BB-410 410
Typenbeispiel:
AN 0100 / 010 / A036 / BB - 160
Baulnge in mm Anschluss bds. Brdelflansch
Axialdehnung: +/- 18 mm = 36 mm PN 10 (Druckstufe) DN (Nennweite) Axialkompensator
400
450
200
250
Andere Dehnungsaufnahmen / Baulngen und Nennweiten sind jederzeit mglich.
100
125
150
500
300
350
Abgas-Kompensatoren/Exhaust expansion joints
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60 11
Balg aus 1.4541 oder 1.4571, mehrwandig, andere Materialien auf AnfrageBrdelflansche aus S 235 JRG 2, DIN 86044, grundiert, weitere Nennweiten auf Anfrage.
Pos. DN Typ Dehnung Dehnung Baulngeaxial +/- lateral +/- (mm)
1 AN 0100 / 001 / a 068 / BB-205 34 18 2052 AN 0100 / 001 / a 120 / BB-360 60 60 3603 AN 0125 / 001 / a 110 / BB-240 55 26 2404 AN 0125 / 001 / a 160 / BB-325 80 50 3255 AN 0150 / 001 / a 066 / BB-160 33 9 1606 AN 0150 / 001 / a 100 / BB-225 50 21 2257 AN 0150 / 001 / a 150 / BB-305 75 42 3058 AN 0200 / 001 / a 054 / BB-155 27 4 1559 AN 0200 / 001 / a 070 / BB-170 35 5 17010 AN 0200 / 001 / a 090 / BB-210 45 10 21011 AN 0200 / 001 / a 130 / BB-265 65 20 26512 AN 0200 / 001 / a 180 / BB-335 90 35 33513 AN 0250 / 001 / a 040 / BB-150 20 2 15014 AN 0250 / 001 / a 060 / BB-170 30 3 17015 AN 0250 / 001 / a 090 / BB-220 45 10 22016 AN 0250 / 001 / a 120 / BB-260 60 18 26017 AN 0250 / 001 / a 180 / BB-360 90 35 36018 AN 0300 / 001 / a 040 / BB-155 20 1,5 15519 AN 0300 / 001 / a 060 / BB-175 30 2,5 17520 AN 0300 / 001 / a 120 / BB-255 60 11 25521 AN 0300 / 001 / a 170 / BB-365 85 28 36522 AN 0350 / 001 / a 050 / BB-160 25 2 16023 AN 0350 / 001 / a 130 / BB-270 65 13 27024 AN 0350 / 001 / a 180 / BB-360 90 27 36025 AN 0400 / 001 / a 060 / BB-190 30 4 19026 AN 0400 / 001 / a 080 / BB-210 40 6 21027 AN 0400 / 001 / a 120 / BB-260 60 10 26028 AN 0400 / 001 / a 150 / BB-310 75 15 31029 AN 0400 / 001 / a 180 / BB-360 90 22 36030 AN 0450 / 001 / a 060 / BB-195 30 3 19531 AN 0450 / 001 / a 100 / BB-240 50 7 24032 AN 0450 / 001 / a 130 / BB-290 65 11 29033 AN 0450 / 001 / a 160 / BB-350 80 18 35034 AN 0500 / 001 / a 060 / BB-205 30 3 20535 AN 0500 / 001 / a 100 / BB-260 50 8 26036 AN 0500 / 001 / a 160 / BB-320 80 14 32037 AN 0500 / 001 / a 180 / BB-360 90 18 36038 AN 0550 / 001 / a 060 / BB-210 30 3 21039 AN 0550 / 001 / a 100 / BB-265 50 8 26540 AN 0550 / 001 / a 160 / BB-320 80 14 32041 AN 0550 / 001 / a 180 / BB-350 90 18 35042 AN 0600 / 001 / a 080 / BB-220 40 4 22043 AN 0600 / 001 / a 120 / BB-270 60 8 27044 AN 0600 / 001 / a 160 / BB-330 80 14 33045 AN 0600 / 001 / a 180 / BB-360 90 18 36046 AN 0700 / 001 / a 090 / BB-220 45 3 22047 AN 0700 / 001 / a 130 / BB-290 65 8 29048 AN 0700 / 001 / a 180 / BB-350 90 15 35049 AN 0800 / 001 / a 070 / BB-210 35 2 21050 AN 0800 / 001 / a 120 / BB-280 60 6 28051 AN 0800 / 001 / a 170 / BB-340 85 12 34052 AN 0900 / 001 / a 080 / BB-210 40 3 21053 AN 0900 / 001 / a 130 / BB-280 65 6 28054 AN 0900 / 001 / a 180 / BB-340 90 12 34055 AN 1000 / 001 / a 080 / BB-210 40 3 21056 AN 1000 / 001 / a 110 / BB-290 55 6 29057 AN 1000 / 001 / a 160 / BB-320 80 10 320
700
800
900
1000
450
500
550
600
250
300
350
400
100
125
150
200
Lateral-Kompensatoren/Lateral expansion joints
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-6012
RN...F/F RM...F/F
4 90 9,9 138 3,3 175 9,3 138 1,26 100 9,5 109 3,3 185 9,0 109 1,3
10 140 7,2 11,4 3,5 220 7,3 12,8 1,412,5 160 6,4 7,6 3,5 250 6,2 7,0 1,516 190 5,5 4,7 3,7 280 5,5 4,4 1,625 230 4,5 2,4 3,9 320 4,5 2,4 1,840 330 3,2 1,0 4,3 420 3,3 1,0 2,265 510 2,1 0,3 5,0 600 2,3 0,3 2,9
100 750 1,6 0,1 6,0 850 1,5 0,1 3,94 95 17,5 222 4,1 200 14,3 222 2,16 115 16,0 136 4,3 220 13,4 136 2,2
10 135 13,6 102 4,4 245 11,4 102 2,412,5 170 11,6 19,6 4,5 280 9,7 17,9 2,416 200 9,8 11,9 4,6 310 8,6 11,0 2,625 280 7,3 4,6 5,1 390 6,6 4,4 3,140 410 5,1 1,8 5,9 520 4,7 1,7 3,865 620 3,4 0,7 7,1 730 3,3 0,6 5,0
100 920 2,3 0,2 8,8 1030 2,3 0,2 6,84 110 31,3 336 7,4 230 25,4 336 3,66 120 29,3 268 7,5 235 24,7 268 3,7
10 160 25,8 160 7,9 275 22,5 160 4,112,5 180 21,4 29,9 7,9 300 18,5 29,9 4,116 220 18,1 16,8 8,2 340 16 16,8 4,425 330 13,8 7,4 8,8 430 12,3 6,9 5,040 450 9,6 2,8 9,9 580 8,8 2,6 6,265 690 6,4 1,0 11,7 820 6,1 1,0 8,0
100 1000 4,5 0,4 14 1150 4,3 0,4 10,54 100 45,7 390 8,1 230 35,7 390 4,86 125 38,8 289 8,4 255 31,4 289 5,1
10 150 33,7 66,1 8,7 280 28 66 5,312,5 170 30,8 43,3 9 300 25,8 43,3 5,616 200 26,7 26,2 9,3 330 23 26,2 5,925 280 24,1 10,3 10,5 410 21,5 10,3 7,140 400 17,7 4,2 11,9 530 16,2 4,2 8,565 610 12,1 1,6 15 740 11,3 1,6 11
100 900 8,4 0,6 18 1050 7,9 0,6 14,74 135 59 382 10,6 320 56 382 10,36 140 56 346 10,8 325 54 346 10,7
10 160 51 94 11,1 350 49,3 83 1112,5 180 46,7 60 11,4 370 46 55 11,316 210 41,3 35,8 11,8 400 41,8 33,2 11,825 280 32,3 15,1 12 470 34,5 14,4 1340 400 23,9 5,9 14 590 26,5 5,7 1565 600 16,5 2,2 17 790 19,1 2,2 18
100 900 11,3 0,9 21 1070 13,7 0,9 23
85
65
114,3 5,0 280100 220 330
4,5
150
12080 200 295 16 88,9 215
18
185 280 16 76,1 105
Typ RM...F/F
CRN/bar
CLN/mm
mkgSR
mmH
mmB
mm
13048,3
4,0 160
DRmm
4,0 200
3,6
60,3
Verstellkraftrate
Lmm
Typ RN...F/FBaumae Verstellkraftrate
bFImm
Lmm
CRN/bar
CLN/mm
mkg
40 150
50 165 240 12
Lochbild nachDIN2501PN 16
210
PN 16DN (NW)
Lateral-aus-
lenkung+/-ANmm
12
DFImm
Hmm
Baumae
70
Lateral-Kompensatoren/Lateral expansion joints
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60 13
Angular-Kompensatoren/Angular expansion joints
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-6014
PN 16
Angular-aus-
lenkungnominal (Grad)
DN(NW)
DRmm
SRmm
Lmm
Hmm
Bmm
mkg
Lmm
Hmm
Bmm
mkg
MRNm/bar
aNm/Grad
10 190 2,2 190 2,5 0,412,5 200 2,4 200 2,7 1,116 215 2,5 215 2,8 0,88 190 2,7 190 3,7 1,110 200 2,8 200 3,8 0,9
12,5 210 2,9 210 4,0 1,816 230 3,1 230 4,2 1,46 210 5,1 210 5,4 2,98 225 5,2 225 5,5 1,910 235 5,4 235 5,6 1,7
12,5 235 5,6 235 5,9 3,116 250 5,8 250 6,0 2,46 220 6,3 220 7,7 3,48 225 6,3 225 7,9 2,810 245 6,5 245 8,0 2,1
12,5 245 6,8 245 8,4 3,916 260 7,1 260 8,6 3,26 260 10,4 260 14,9 6,78 280 10,7 280 15,2 4,810 290 10,9 290 15,3 4,2
12,5 280 11,1 280 15,7 4,716 280 11,2 280 15,9 4,76 290 11,6 290 21,6 10,88 300 11,8 300 21,8 9,010 305 12,3 305 22,5 9,3
12,5 335 13,4 335 24,0 11,116 330 13,4 330 23,9 7,94 290 14,1 290 31,7 25,26 300 14,3 300 31,8 21,08 295 14,6 295 32,4 17,610 305 14,9 305 32,5 15,1
12,5 350 16,2 350 33,3 14,34 330 22,3 330 42,3 49,76 360 23,3 360 42,8 35,58 360 24,3 360 45,1 35,910 375 25,0 375 45,5 31,4
12,5 405 26,3 405 46,3 25,14 355 27,3 355 53,8 58,16 390 28,5 390 54,5 38,78 385 29,5 385 56,8 39,710 400 30,2 400 57,2 34,1
12,5 435 31,8 435 58,3 26,54 425 48 425 89 776 460 50 460 90 558 450 51 450 99 5910 470 52 470 100 51
12,5 545 59 545 110 64
150
120220
150 2053155,6168,3
125 1752805,0139,7
4,5
100 114,3 5,0
88,980
4,060,350
65
4,2
340 340
40 48,3 3,6 140 70
85155
200 219,1 7,1 390 8,8
400 400
280 280 1,5
2,6
355 355
6,9
270 470 470
235
185 0,5
220 220 0,7
185
0,2
175 175 0,3
150
250 273,0 8,0 485
150
175 193,7 6,3 350
1052004,076,1
250
320 545 545 16,2
Typ KN...RRBaumaeTyp WN...RR BaumaeAnschlumae
WNR/R KNR/R
Verstellmomentrate
Angular-Kompensatoren/Angular expansion joints
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60 15
PN 16
Angular-aus-
lenkungnominal (Grad)
DN(NW)
DRmm
SRmm
Lmm
Hmm
Bmm
mkg
Lmm
Hmm
Bmm
mkg
MRNm/bar
aNm/Grad
4 470 76 470 144 1686 485 80 485 158 1398 505 82 505 159 11910 540 85 540 165 92
12,5 610 95 610 180 1322,5 475 91 475 207 4124 520 95 520 209 2476 570 99 570 211 1778 530 98 530 216 12010 575 102 575 219 902,5 535 134 535 255 4704 585 140 585 259 3146 630 145 630 261 2358 615 146 615 269 13610 635 148 635 271 1212,5 565 158 565 351 6784 615 164 615 368 4526 685 171 685 372 3018 680 181 680 378 32910 725 188 725 388 2692,5 585 210 585 411 9814 635 217 635 240 6546 705 227 705 445 4368 730 242 730 461 59010 810 257 810 470 4432,5 625 305 625 647 12694 630 309 630 650 9976 690 321 690 684 6648 745 332 745 699 498
2,5 695 431 695 876 25714 700 436 700 883 20276 765 455 765 889 13518 835 476 835 924 1013
2,5 745 578 745 1324 29204 750 585 750 1332 23036 825 612 825 1363 1535
1,5 770 782 770 1781 58002,5 775 790 775 1783 43504 820 802 820 1803 26476 895 831 895 1837 1891
1,5 1005 776 1005 1854 126652,5 1010 776 1010 1855 84434 1015 780 1015 1858 44466 1080 823 1080 1900 2964
1,5 1020 913 1020 2372 109462,5 1035 917 1035 2377 65674 1065 925 1065 2387 3823
1,5 1060 1080 1060 2750 142162,5 1065 1060 1065 2730 85294 1085 1077 1085 2746 4824
Anschlumae VerstellmomentrateTyp KN...RRBaumaeTyp WN...RR
Baumae
323,9 8,0 560 630630380300
33,3355,6 8,8 610 715715420350
27,3
406,4 8,8 690 770770485400
72457,2 10,0 740 865865525450
51
508,0 11,0 825 930930575500
157609,6 12,5 940 11001100680600
89
711,2 12,5 1110 12201220800700
334812,8 14,2 1250 14201420910800
213
418914,4 16,0 1365 156515651010900
1016 16,0 15451000 1120 1710 1710 686
8401120 16,0 1640 1870187012201100
1220 16,0 17301200 1315 1970 1970 988
Fernheizungs-Kompensatoren/District heating expansion joints TYP HKS ABH
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-6016
Der Axialkompensator Typ ABH wurde speziell fr den Einbau in Fernheizleitungen entwickelt. Der hochflexiblewandige Matallbalg wird duch das uere Mantelrohr vor Beschdigungen auch bei rauhem Baustellenbetriebgeschtzt. Dank der Belastung durch Auendruck ist der Metallbalg knickstabil, unabhngig von seiner Lnge. Betriebs-sicherheit und Dehnungsaufnahme sind deshalb grer als bei nach herkmmlichem Prinzip gebauten Kompensatoren.Durch in beide Richtungen wirkende Hubbegrenzung knnen, wenn erforderlich, zwei Kompensatoren zwischen zweiFestpunkten eingesetzt werden, ohne da ein Metallbalg berlastet werden kann. Die Verdrehsicherung soll bei der Montage helfen, da keine Torsionsmomente in den Metallbalg eingeleitet werden. Der Kompensator Typ ABH wird miteiner Vorspannvorrichtung, die sich beim Anfahren der Leitung selbstttig lst, einbaufertig vorgespannt geliefert.Der Kompensator wird mit beiderseits Rohrstutzen mit 30 Schweifase, wahlweise mit Fest- oder Losflansch geliefert.
Auslegungsdaten
Betriebsdruck: betr1) 16 bar 25 bar
Betriebstemperatur: betr max. 300 C
Prfdruck: Prf 25 bar 37,5 bar
Lastwechsel: N 1000
Zul. Auslenkung: fN 1) Die Aufteilung derangegebenen Auslenkung richtetsich nach der Vorspannung.
1) Bei hheren Betriebstemperaturen als 150 C ist eineAbminderung zu bercksichtigen.
Abminderungsfaktoren betr 150 C 200 C 250 C 300 Cfr zul. Druck
kp 1 0,93 0,84 0,69
fr zul. Auslenkung kp 1 0,97 0,94 0,93
Zulssiger Betriebsdruckbetrzul PN x kp (bar)bei erhhter Betriebstemperatur
Zulssige Auslenkung fbetrzul fN x kp (mm)bei erhhter Betriebstemperatur
MontagehinweisDer Kompensator Typ HKS ABH dient nur zum Ausgleichvon axialen Dehnungen in Rohleitungen. Beanspruchungquer zu seiner Achse und durch Verdrehung sollte vermie-den werden.Im Unterschied zum normalen Axialkompensator knnen,wenn erforderlich, auch zwei Kompensatoren zwischenzwei Festpunkten angeordnet werden. Die Festpunktesind ausreichend gegen die auftretenden Festpunktkrftezu dimensionieren.Die Festpunktkrfte errechnen sich:Fr den FFest max. = Aw x Pbetr x 10 + F + FR (N)Betriebsfall:Bei Abnahme FFest = Aw x Pprf x 10 + F + FR (N)(Prfdruck):
Die grere der beiden Krfte ist fr die Dimensionierungbestimmend.
Aw cm2 Wirkflche des Kompensators (s. Tabelle)
betr bar max. Betriebsdruck
Prf bar Prfdruck
FR N RohrreibungskraftGesamtgewicht der Rohrleitungx Reibungskoeffizienten ()
HKS ABH standardaxial expansion jointsfor district heating
The HKS type expansion joints have been designedspecially for installation in district heating pipe systemsand constructed in such a way that, when the bellows isfully compressed, the axial compressive forces in thepipeline can be transferred directly through the adjoiningend surfaces of the media pipes, without the bellowsbeing overloaded.
If the temperature in the pipe network drops to such anextent that tensile stresses occur, the maximum tensilestresses in the media pipe will be transferred to the stopring through the outer casing pipe and the contact facesof the slide guide.This design means that the number of fastenings in thepipe system can be reduced, as the expansion joints canbe installed in serios in sections of pipe without inter me-diate fastenings. The expansion joints will trigger eachother individually. Together with the media pipe, the guidepipe forms a telescopic union in the expansion joint, allo-wing optional installation of the expansion joint with re-gard to direction of flow.
This telescopic union also forms a guide, allowing lengthsof pipe to be welded together, including the expansionjoint, and then laid in the trench without the expansionjoint being damaged.The expansion joint is pre-stressed 100 % at the factoryusing explosive bolts, which are fitted through the stopring and into the slide guide.When the installation is put into operation, the explosivebolts are activated, triggering the movement of the ex-pansion joint see also the table for initial force.When installing expansion joints in a curved section, atleast 12 meters of straight pipe must be installed beforeand after the expansion jonts.Pipes with HKS-Expansion joint should be tested to max.24 bar for pressure stage 16 and max. 37.5 bar for pres-sure stage 25 at 20 C.
060 114,3 03,6 168,3 0400 0420 225 50 0149 118 011120 600 0640 410 056 019050 0400 0430 235 219 019100 139,7 04,0 219,1 0600 0640 405 60 0226 115 029150 0800 0850 580 079 042055 0400 0420 225 214 030120 168,3 04,5 267,0 0700 0740 425 60 0323 102 044155 0800 0850 525 080 053055 0400 0420 225 239 034110 193,7 05,6 292,0 0650 0690 415 60 0401 112 053150 0800 0860 520 087 065050 0400 0420 230 356 045110 219,1 06,3 324,0 0600 0640 415 60 0512 166 071200 1000 1100 710 089 115100 0600 0630 420 234 115140 273,0 08,8 406,4 0750 0790 500 70 0797 138 128250 1120 1160 975 073 217100 0700 0740 425 261 150140 323,9 10,0 457,0 0800 0850 505 70 1096 166 165250 1300 1360 980 088 280
Gewicht
Gca. kg
BaumaeEinbaulg. bei
Standard-vorspannung
DR SR DM L LE LM LRmm mm mm mm mm mm mm
Fernheizungs-Kompensatoren/District heating expansion joints TYP HKS ABH
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60 17
DN(NW)
Axial-aus-
lenkung
fN
TechnischeDaten
wirk- Feder-same rateFlche
Aw ccm2 N
mm
060 0350 0375 225 076 011080 114,3 03,6 168,3 0400 0430 255 50 0148 055 013120 0590 0650 410 036 017050 0350 0370 215 142 018100 139,7 04,0 219,1 0550 0600 385 60 0226 075 027130 0620 0670 420 060 033055 0400 0440 225 141 028110 168,3 04,5 267,0 0600 0640 380 60 0320 073 036140 0650 0700 415 055 039050 0400 0420 215 236 037110 193,7 05,6 292,0 0600 0640 410 60 0401 105 058140 0650 0690 430 063 091060 400 420 225 216 044130 219,1 06,3 324,0 600 645 410 60 0509 101 071230 900 980 700 054 100120 0600 640 405 124 090160 273,0 8,8 406,4 0700 760 435 70 794 81 095300 1100 1200 770 43 149120 0700 0740 415 138 119160 323,9 10,0 457,0 0800 0860 450 70 1092 099 125300 1100 1240 790 053 196
100
125
150
175
200
250
300
Gewicht
Gca. kg
BaumaeEinbaulg. bei
Standard-vorspannung
DR SR DM L LE LM LRmm mm mm mm mm mm mm
DN(NW)
Axial-aus-
lenkung
fN
TechnischeDaten
wirk- Feder-same rateFlche
Aw ccm2 N
mm
100
125
150
175
200
250
300
PN 16
PN 25
L Rohrleitungslnge fr einen Kompensator
TYP AFH
Fhrung FestpunktFestpunkt
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60
Linsen-KompensatorenLens expansion joint
18
Rohr- Wellen- Baulnge WandstrkeDN auen - auen - BI S
da in mm da in mm in mm in mm
50 60,3 250 70 2 - 4
65 76,1 270 70 2 - 4
80 88,9 325 85 2 - 4
100 114,3 350 90 2 - 4
125 139,7 375 90 2 - 4
150 168,3 400 95 2 - 4
175 193,7 450 110 2 - 4
200 219,1 475 110 2 - 6
250 273,0 525 110 2 - 6
275 292,0 550 115 2 - 6
300 323,9 600 125 2 - 8
350 355,6 650 125 2 - 8
400 406,4 700 125 2 - 8
450 457,2 750 135 2 - 8
500 508,0 800 160 2 - 10
550 558,8 850 160 2 - 10
600 609,6 900 160 2 - 10
700 711,2 1000 160 2 - 10
800 812,8 1100 160 2 - 10
900 914,4 1200 160 2 - 10
1000 1016,0 1300 160 2 - 10
1100 1120,0 1430 180 2 - 10
Materialien
Stahl EdelstahlS235JRG2 (RSt 37-2) 1.4541P265GH (H II) 1.457116 Mo 3 1.482813 CrMo 44 2.4858
Weitere Materialien auf Anfrage.
Rohr- Wellen- Baulnge WandstrkeDN auen - auen - BI S
da in mm da in mm in mm in mm
1200 1220,0 1530 180 2 - 10
1300 1320,0 1650 180 2 - 10
1400 1420,0 1750 180 2 - 10
1500 1520,0 1850 200 2 - 10
1600 1620,0 1950 200 2 - 10
1700 1720,0 2050 200 2 - 10
1800 1820,0 2150 200 2 - 10
1900 1920,0 2250 200 2 - 10
2000 2020,0 2400 200 2 - 10
2100 2120,0 2500 200 2 - 10
2200 2220,0 2600 200 2 - 10
2300 2320,0 2700 200 2 - 10
2400 2420,0 2800 200 2 - 10
2500 2520,0 2900 200 2 - 10
2600 2620,0 3000 200 2 - 10
2700 2720,0 3100 200 2 - 10
2800 2820,0 3200 200 2 - 10
2900 2920,0 3300 200 2 - 10
3000 3020,0 3400 200 2 - 10
bis 4000 und drber 4020,0 4450 200 2 - 10
Weitere Abmessungen auf Anfrage.
Bezeichnungsbeispiel
Einwelliger LinsenkompensatorWandstrke 3 mm aus 1.4541L-MB 1000/1/1x3/160/1.4541
Linsenkompensatoren knnen auch als Lateral- und Angular-kompensatoren eingesetzt werden (siehe Rubrik Edelstahl-kompensatoren). Weitere Ausfhrungen auf Anfrage.
Abmessungen
Edelstahl-Kompensatoren fr Heizungs- und SprinkleranlagenStainless steel expansion joints for heating- and sprinkler systems
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60 19
Typ DN PN Baulnge Minimum Baulnge Maximum
010 16 75 130
010 16 110 210
010 16 200 410
010 16 260 520
012 16 75 130
012 16 110 210
012 16 200 410
012 16 260 520
HZK 025 10 75 130
025 10 110 210
025 10 200 410
025 10 260 520
032 10 75 130
032 10 110 210
032 10 200 410
032 10 260 520
040 10 110 240
040 10 200 410
040 10 260 520
050 10 110 240
050 10 200 410
050 10 260 520
Typ DN PN Baulnge Minimum Baulnge Maximum
010 16 75 130
010 16 110 210
010 16 200 410
010 16 260 520
012 16 75 130
012 16 110 210
012 16 200 410
012 16 260 520
025 10 75 130
025 10 110 210
025 10 200 410
025 10 260 520
032 10 75 130
032 10 110 210
HZK 032 10 200 410
032 10 260 520
040 10 110 240
040 10 200 410
040 10 260 520
050 10 110 240
050 10 200 410
050 10 260 520
HKS Typ HZKFLEX-Rohr / Heizung
Innengewinde / Innengewinde
Ausfhrung (PN 10/16),Werkstoff: Edelstahl 1.4401, Anschlsse
HKS Typ HZKFLEX-Rohr / Heizung
Auengewinde / Innengewinde
Ausfhrung (PN 10/16),Werkstoff: Edelstahl 1.4401, Anschlsse
Typenbeispiel:
HZK 010 / 10 / 16 / 75 / 130 / IG / IG
Anschlu
Baulnge/max.
Baulnge/min
PN (nominal pressure)
DN (nominal diameter)
Typenbeispiel:
HZK 010 / 10 / 16 / 75 / 130 / AG / IG
Anschlu
Baulnge/max.
Baulnge/min
PN (nominal pressure)
DN (nominal diameter)
Baulnge Maximum
Baulnge Minimum
Baulnge Maximum
Baulnge Minimum
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-6020
Ringgewellte Metallschluche/Metal hoses with annular corrugations
DN
DA
Durchmesser: siehe Tabelle DN 6 bis DN 500.Betriebsdruck: UH Vakuum bis PN 100.Leckrate: kleiner als 10-10 m bar l/sek.
Werkstoffe:Standard (Wellrohr) Sonderausfhrung
Edelstahl rostfrei WNr 1.4541 Edelstahl korrosionsfest WNr 1.4435WNr 1.4571 Nickelbasis-Legierung
Cu-Legierung Kupfernickel WNr 2.0878Bronze Cu Sn 6 WNr 2.1020 Monel 400 WNr 2.4316
Neusilber Cu Ni Zn 20 WNr 2.0740
Standard (Geflechtsdraht) Sonderausfhrung
Edelstahl rostfrei WNr 1.4301 Werkstoff auf AnfrageWNr 1.4401
Bronze Cu Sn 6 WNr 2.1020Verzinkter Stahl WNr 1.0313
Einbaufertige Standardausfhrungen:Schwingungsdmpfer fr Klte- und Klimaanlagen Metallschluche fr DichtungskpfeOffshore Dampfschluche SauerstofflanzenschlucheVakuum-Anschlsse Metallschluche fr Dichtungskpfe
Diameter see table 6 to 400 mm nom.Working pressure ultra-high vacuum up to 100 bar.Leak rate less than 10-10 mbar x dm3/sec.
Materials:Standard (corrugated hose) Special design
High-grade High-grade corrosion-stainless steel mat. no. 1.4541 (DIN 17440) resistant steel mat. no. 1.4435 (DIN 17440)
mat. no. 1.4571 (DIN 17440) Nickel based alloyCopper alloy cupro-nickel mat. no. 2.0878 (DIN 17664)bronze CuSn6 mat. no. 2.1020 (DIN 17662) Monel 400 mat. no. 2.4316 (DIN 17743)
Nickel silver CuNiZn20 mat. no. 2.0740 (DIN 17663)
Standard (braiding wire) Special design
High-grade Material on requeststainless steel mat. no. 1.4301 (DIN 17440)
mat. no. 1.4401 (DIN 17440)Bronze CuSn6 mat. no. 2.1020 (DIN 17662)Galvanized mat. no. 1.0313 (DIN 17140)
Ready-to-fit standard designs:Vibration damper for refrigerating and air conditioning installations Metal hoses for sealing heads (rotary unions)Offshore steam hoses Oxygen lance hosesVakuum connectors Tank truck filling hoses
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60 21
Ringgewellte Metallschluche/normalgewellt Typ BMetal hoses with annular corrugations/standard pitch ohne Geflecht/Hose core Einfach Geflecht/single braid zweifach Geflecht/double braid
Nominelle Maximaler Arbeits- Maximaler Test- Brust Druck Minimaler ge- Nominell Durchschnitts- HKSGre DN druck bei 20C druck bei 20C 20C bogener Radius O. D. Gewicht Schlauchhinweis
mm ins bar lbs/sq. in. bar lbs/sq. in. bar lbs/sq. in. mm ins. mm ins. Kg/m lbs/ft.
Nominal Maximum working Maximum test Brust presurre at Minimum bend Nominal Approximate HKSSize DN pressure at 20C pressure at 20C 20C radius flexing O. D. Weight Hose Reference
mm ins bar lbs/sq. in. bar lbs/sq. in. bar lbs/sq. in. mm ins. mm ins. Kg/m lbs/ft.
10 145 15 220 40 580 100 4.0 13.0 0.50 0.17 0.11 6 1/4 140 2030 210 3045 560 8120 100 4.0 15.0 0.60 0.28 0.19
250 3625 375 5440 1000 14500 100 4.0 17.5 0.68 0.40 0.27
10 145 15 220 40 580 125 5.0 16.5 0.65 0.24 0.16 10 3/8 100 1450 150 2175 400 5800 125 5.0 18.0 0.71 0.39 0.26
180 2610 270 3915 720 10440 125 5.0 20.5 0.81 0.56 0.38
5 75 7.5 110 20 290 125 5.0 21.0 0.85 0.31 0.21 12 1/2 90 1305 135 1960 360 5220 125 5.0 23.0 0.90 0.50 0.34
160 2320 240 3480 640 9280 125 5.0 25.5 1.00 0.71 0.48
5 75 7 105 20 290 150 6.0 26.5 1.04 0.35 0.23 16 5/8 65 940 97 1410 260 3770 150 6.0 28.0 1.10 0.55 0.37
120 1740 180 2610 480 6960 150 6.0 30.0 1.18 0.75 0.50
4 60 6 90 16 230 150 6.0 28.5 1.10 0.37 0.25 20 3/4 55 800 83 1200 220 3200 150 6.0 31.5 1.24 0.62 0.42
93 1350 140 2030 372 5400 150 6.0 34.5 1.36 0.90 0.60
4 60 6 90 16 230 175 7.0 36.0 1.40 0.48 0.32 25 1 48 700 72 1050 192 2780 175 7.0 37.5 1.50 0.80 0.53
77 1120 115 1670 308 4470 175 7.0 40.5 1.60 1.13 0.75
3 43 4.5 65 12 170 200 8.0 43.5 1.70 0.65 0.45 32 1 1/4 38 550 57 825 152 2200 200 8.0 47.0 1.85 1.15 0.78
62 900 93 1350 248 3600 200 8.0 51.0 2.00 1.70 1.15
2 29 3 43 8 120 250 10 53.0 2.10 0.85 0.57 40 1 1/2 34 490 51 740 136 1970 250 10 56.5 2.20 1.50 1.10
46 670 69 1000 184 2670 250 10 60.0 2.35 2.20 1.50
1 14 1.5 22 4 60 350 14 67.5 2.65 1.25 0.84 50 2 31 450 46 670 124 1800 350 14 71.0 2.80 2.10 1.40
43 625 64 930 172 2500 350 14 75.0 2.95 3.05 2.05
1 14 1.5 22 4 60 500 20 81.5 3.20 1.55 1.03 65 2 1/2 27 390 40 580 108 1570 500 20 86.5 3.40 2.65 1.78
37 540 56 810 148 2150 500 20 91.0 3.60 3.90 2.60
1 14 1.5 22 4 60 525 21 96 3.80 1.80 1.20 80 3 24 350 36 520 96 1400 525 21 100 3.95 3.13 2.10
34 490 51 740 136 1980 525 21 105 4.10 4.55 3.05
0.7 10 1.1 16 3 43 625 25 124 4.90 2.40 1.60 100 4 15 215 22 320 60 870 625 25 130 5.10 4.15 2.77
18 260 27 400 72 1050 625 25 136 5.35 6.05 4.05
0.7 10 1.1 16 3 43 750 30 154 6.05 3.90 2.60 125 5 14 200 21 305 56 810 750 30 159 6.25 6.40 4.28
17 250 25 360 68 990 750 30 165 6.50 9.10 6.12
0.5 7 0.75 11 2 29 900 36 178 7.00 4.50 3.10 150 6 9 130 14 200 36 520 900 36 183 7.20 7.85 5.25
14 200 21 305 56 810 900 36 188 7.40 11.5 7.70
0.3 4 0.45 6 1.2 17 1020 40 234 9.20 6.00 4.02 200 8 8 120 12 170 32 460 1020 40 241 9.50 10.5 7.04
14 200 21 305 56 810 1020 40 246 9.70 15.5 10.4
0.25 3 0.36 5 1 14 1220 48 286 11.25 7.50 5.00 250 10 6 90 9 130 24 350 1220 48 290 11.40 12.5 8.40
10 145 15 220 40 580 1220 48 295 11.60 18.0 12.0
Erluterung:PN Nenndruck max. zulssiger Betriebsdruck bei Raumtemperatur.RN Nennbiegradius Beim Einbau des Metallschlauches mit Nennbiegradius und Beachtung der Einbauvorschriften
ist eine Lebensdauer von 105 Biegewechseln zu erwarten, ohne Einflu von Korrosion.Bei hheren Betriebstemperaturen mu der Nennbiegradius vergrert werden (siehe Haupt-katalog).
G Gewicht pro Meter des umflochtenen Metallschlauches (mit einer Abweichung von 10%).RO Biegradius fr einmalige Biegung Der Metallschlauch darf in diesem radius etwa 35 malgebogen werden, ohne Schaden zu
nehmen, z. B. fr den Transport oder bei Festinstallation zum Ausgleich von Fluchtfehlern.
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-6022
Ringgewellte Metallschluche/enggewellt Typ CMetal hoses with annular corrugations/close pitch
Nominelle Maximaler Arbeits- Maximaler Test- Brust Druck Minimaler ge- Nominell Durchschnitts- HKSGre DN druck bei 20C druck bei 20C 20C bogener Radius O. D. Gewicht Schlauchhinweis
mm ins bar lbs/sq. in. bar lbs/sq. in. bar lbs/sq. in. mm ins. mm ins. Kg/m lbs/ft.
Nominal Maximum working Maximum test Brust presurre at Minimum bend Nominal Approximate HKSSize DN pressure at 20C pressure at 20C 20C radius flexing O. D. Weight Hose Reference
mm ins bar lbs/sq. in. bar lbs/sq. in. bar lbs/sq. in. mm ins. mm ins. Kg/m lbs/ft.
10 145 15 220 40 580 75 3.0 13.0 0.50 0.22 0.15 6 1/4 160 2320 240 3080 640 9280 75 3.0 15.0 0.60 0.33 0.22
275 3990 412 5970 1100 15950 75 3.0 17.5 0.68 0.45 0.30
10 145 15 220 40 580 90 3.5 16.5 0.65 0.33 0.22 10 3/8 138 2000 207 3000 552 8000 90 3.5 18.0 0.71 0.48 0.32
220 3190 330 4790 880 12760 90 3.5 20.5 0.81 0.65 0.44
5 75 7.5 110 20 290 100 4.0 21.0 0.85 0.40 0.27 12 1/2 103 1500 154 2230 412 5980 100 4.0 23.0 0.90 0.60 0.40
176 2550 264 3830 704 10200 100 4.0 25.5 1.00 0.80 0.54
4 60 6 90 16 230 115 4.5 28.5 1.10 0.50 0.34 20 3/4 62 900 93 1350 248 3600 115 4.5 31.5 1.24 0.75 0.50
110 1600 165 2400 440 6400 115 4.5 34.5 1.36 1.00 0.67
4 60 6 90 16 230 125 5.0 36.0 1.40 0.65 0.44 25 1 52 750 78 1130 208 3020 125 5.0 37.5 1.50 0.95 0.65
90 1350 135 1960 360 5220 125 5.0 40.5 1.60 1.25 0.84
3 43 4.5 65 12 170 150 6.0 43.5 1.70 0.90 0.60 32 1 1/4 42 610 63 910 168 2400 150 6.0 47.0 1.85 1.40 0.94
69 1000 103 1500 276 4000 150 6.0 51.0 2.00 1.95 1.30
2 29 3 43 8 120 200 8.0 53.0 2.10 1.10 0.74 40 1 1/2 38 550 57 830 152 2200 200 8.0 56.5 2.20 1.75 1.17
52 750 78 1130 208 3000 200 8.0 60.0 2.35 2.45 1.64
1 14 1.5 22 4 60 275 11 67.5 2.65 1.60 1.07 50 2 34 490 51 740 136 1970 275 11 71.0 2.80 2.45 1.64
48 700 72 1050 192 2780 275 11 75.0 2.95 3.40 2.28
1 14 1.5 22 4 60 350 14 81.5 3.20 1.90 1.27 65 2 1/2 31 450 46 670 124 1800 350 14 86.5 3.40 3.00 2.00
41 595 61 890 164 2380 350 14 91.0 3.60 4.20 2.80
1 14 1.5 22 4 60 400 16 96 3.80 2.25 1.50 80 3 27 390 40 580 108 1570 400 16 100 3.95 3.55 2.35
38 550 57 830 152 2200 400 16 105 4.10 5.00 3.35
0.7 10 1.1 16 3 43 500 20 124 4.90 3.10 2.08 100 4 17 250 25 360 68 990 500 20 130 5.10 4.80 3.20
20 290 30 440 80 1160 500 20 136 5.35 6.70 4.50
0.7 10 1.1 16 3 43 660 26 154 6.05 5.00 3.35 125 5 16 230 24 350 64 920 660 26 159 6.25 7.50 5.00
19 280 28 410 76 1100 660 26 165 6.50 10.2 6.80
0.5 7 0.75 11 2 29 760 30 178 7.00 5.80 3.90 150 6 10 145 15 220 40 580 760 30 183 7.20 9.10 6.10
15 220 22 320 60 870 760 30 188 7.40 12.7 8.50
Explanatory notes:NP Nom. press. Max. permissible working pressure at room temperature.RN nominal bend radius When Installing the metal hose with the nominal bend radius and observing the installation in-
structions, a service life of 105 bending reversals can be expected, ignoring the effect of corrosion.At higher working temperatures the nominal bend radius must be increased.
weight per metre of the braided metal hose (with a tolerance of 10%).RU bend radius for an unrepeated bend The metal hose may be bent about 3 to 5 times with this radius without coming to any harm; e. g.
during transport or during permanent installation for equalizing misalignments.
Klemmverbindungen Clamped yoints
Typ I
Typ II
Typ III
Typ IV
Typ V
Typ VI
Typ VII
Typ VIII
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60 23
SchlauchanschluartenHose connections
Festflansch nachDIN 2633PN 16
Fixed flange
AnschweiendeDIN 3239Teil 1
weld end
Rohrverschraubung mitFlachdichtung
Rotatable screwwith weld on connectionflat seal
no braiding1 braiding2 braidingmetal-hose
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-6024
Flanschverbindung
connectionwith rect. flange
Schlauchanschlumit Rechteckflansch
connectionwith rect. flange
Gewindenippel mit 6ktDIN 2950 280 (N8)thread male
SchlauchanschluartenHose connections
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60 25
SchlauchanschluartenHose connections
Gewindenippel mit 6ktDIN 2990
thread male
Losflansch mitBund und Brdelnach DIN 2673PN10
Swivel flangeDIN 2673PN 10
Losflansch mitBund nachDIN 2656PN40
Swivel flangeDIN 2656PN 40
no braiding1 braiding2 braidingmetal-hose
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-6026
SchlauchanschluartenHose connections
Rohrverschraubung,konisch dichtd.DIN 2950 341 (U12)
Rotatable screwfemale threadconical seal
Rohrverschraubungmit KegeldichtungDIN 2993
Rotatable screwfemale threadconical seal
Anschweirohr-verschraubungFa. DILO
Rotatable screwweld on connectionflate seal
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60 27
HKS-Lieferprogramm fr HaustechnikHKS delivery programm of hoses used in houses
Heizungsschluche hoses for heating systems DN 10 DN 65Sanitrschluche hoses for sanitry DN 6 DN 65Klimaschluche hoses for air condition DN 6 DN 65Hydraulikschuche hydraulic hoses DN 4 DN 100Edelstahlschluche hoses made from stainless steel DN 4 DN 300Bronzeschluche hoses made from bronze DN 4 DN 150Gummikompensatoren rubber expansion joints DN 25 DN 300
Werkstoffe fr Heizungs,- Sanitr- und Klimaschluchematerials of heating-, sanitary- and air conditioning
Schlauch hose : Elastomere EPDMGeflecht braid : 1.4301 / AISI 304auf Wunsch on request : Schaumstoff-Isolierung / insulationAnschlu connection : Messing, Stahl / brass, steelSonderanschlsse special connections : auf Anfrage / an requestBetriebsdruck working pressure : 6 bar 50 barBetriebstemperatur working temperature : -15C +110C
Anschlu-Arten in Stahl oder MessingTypes of connections made from steel or brass
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60
HKS-SpezialschlauchHKS special hose
28
Die flexible Schlauchleitung fr Offshore-Dampframmen.Die HKS hat unter Einsatz modernster Fertigungstechnolo-gien einen neuen Schlauch entwickelt.
Der HKS-Schlauch ist eine Kombination aus einem Metall-schlauch und einem homogen vulkanisierten Gummi-schlauch mit eingebetteten Drucktrgerlager aus Stahl.
Durch diese patentierte Konstruktion werden die im Einsatzauftretenden dynamischen Krfte direkt auf den voll inte-grierten Anschlunippel bertragen.
Die dampffhrende Innenlage besteht aus einem Edelstahl-Ringwellschlauch.
Der HKS-Schlauch ist fr Dampftemperaturen bis +210 Cbei maximalen Arbeitsdrcken von 17,5 bar bei 10-facherSicherheit ausgelegt.
Die Auendecke ist seewasser- und witterungsbestndigsowie abriebfest.
Innendurchmesser: 4 8.
Maximale Lieferlnge: 50 Fuss.
Zulssiger Biegeradius: 8 x Innendurchmesser.
Anschlsse: Stahlnippel mit NPT-Auengewinde.
The flexible hose line offshore steam pile.
HKS devolopped a new pile driver hose by using modernmanufacturing technologies.
Combines a metal a metal hose and a homogeneouslycured rubber hose with imbedded pressure-carrier pliesmade of stell.
This patented design enables the dynamic forces occurringon use to be directly transmitted to the fully integrated con-necting fitting. The steamleading inner lining consists of ahigh-grade steel anular wave hose.
The HKS hose is constructed for steam-temperature of upto +210C at maximum working pressure of 17,5 bar pro-viding 10 times higher security.
The outer cover is sea water- and weather-proof and resi-stant to abrasion.
Inner Diameter: 4 8.
Maximum lenght at supply: 50 feet.
Allowable Bending Radius: 8 times the inner diameter.
Connections: High-grade/flanges Steel nipple providingexternal thread.
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60
GummikompensatorenRubber Expansion Joint
30
1) Andere Flanschnormen und -werkstoffe auf Wunsch lieferbar: DIN PN 6, PN 25/40, ANSI B 16.5 (ASA150 lb.), BS 10 Tafel E, F, H. Flansche aus Niro-Stahl 1.4571, Bronze oder Stahl feuerverzinkt.
1) Other flange standards and materials aailable on request, for example DIN PN 6, PN 25/40, ANSI B16.5 (ASA 150 lbs.), BS 10 table E, F, H. Flanges of stainless steel 1.4571, brass, bronze or hot galva-nized steel.
Zugelassen fr Trinkwasser / Approved for drinking waterPrfzeugnis vom 29. Juli 1985. Die Innenschicht entspricht den KTW-Empfehlungen D1 und D2 sowie der DIN 7725-1.1 und der BGA-Em-pfehlung (Chlorzehrung)
Nicht geeignet fr Minerallprodukte aller Art, Khlwasser mit Zusatzvon lhaltigen Korrosionsschutzmitteln, lhaltige Kompressorluft.Innenschicht: Butyl/EPDM-Compound, diffusionsdicht, leitfhigDrucktrger R: Nylon-Textilcord, EPDM-gummiert, nicht verhrtendDrucktrger RS: Drucktrger Polymer TextilcordAuenschicht: EPDM, ozonfest, wrmebestndig, elektr. leitfhigMarkierung: roter Markenring, HKS-DN PN 16, HerstelldatumFlansch: drehbar, Stahl St. 37.2, verzinkt und gelb chromatiert
Not suitable for all kinds of mineral oil products, cooling water with added oil-containing corrosion preventatives, oily compressor air.Tube: Butyl/EPDM compound, non-permeable, elec. conductiveReinforcement R: Nylon textile cord, EPDM rubberized, non-hardeningReinforcement RS: Polymer textil cord, hot water proofCover: EPDM, ozone proof, warmth resistant, elec. conductiveStamping: red band, HKS size - DM PN 16, production dateFlanges: swiveling, carbon steel, galvanized + yellow chromated
DN / BL / PN wirks. Gewicht Flansche 1)
Flche Abmessungen mmBellow size / Lenght / Press. nom. Effect. Weight DIN Flanges 1)
DN / BL / PN area appr. Measurements mm
Q : cm2 = kg D k l x
25 / 130 / 16 HKS-R (oder -RS) 10 2,3 115 85 4 x 1432 / 130 / 16 HKS-R (oder -RS) 15 2,7 140 100 4 x 1832 / 160 / 16 HKS-R (oder -RS) 15 2,8 140 100 4 x 1840 / 130 / 16 HKS-R (oder -RS) 20 4,0 150 110 4 x 1840 / 160 / 16 HKS-R (oder -RS) 20 4,1 150 110 4 x 1850 / 130 / 16 HKS-R (oder -RS) 30 4,5 165 125 4 x 1850 / 150 / 16 HKS-R (oder -RS) 30 4,6 165 125 4 x 1850 / 160 / 16 HKS-R (oder -RS) 30 4,7 165 125 4 x 1865 / 130 / 16 HKS-R (oder -RS) 50 5,0 185 145 4 x 1865 / 150 / 16 HKS-R (oder -RS) 50 5,1 185 145 4 x 1865 / 160 / 16 HKS-R (oder -RS) 50 5,2 185 145 4 x 1880 / 130 / 16 HKS-R (oder -RS) 85 6,5 200 160 8 x 1880 / 150 / 16 HKS-R (oder -RS) 85 6,6 200 160 8 x 1880 / 160 / 16 HKS-R (oder -RS) 85 6,7 200 160 8 x 18
100 / 130 / 16 HKS-R (oder -RS) 125 8,0 220 180 8 x 18100 / 150 / 16 HKS-R (oder -RS) 125 8,1 220 180 8 x 18100 / 160 / 16 HKS-R (oder -RS) 125 8,2 220 180 8 x 18125 / 130 / 16 HKS-R (oder -RS) 185 9,5 250 210 8 x 18125 / 150 / 16 HKS-R (oder -RS) 185 9,6 250 210 8 x 18125 / 160 / 16 HKS-R (oder -RS) 185 9,7 250 210 8 x 18150 / 130 / 16 HKS-R (oder -RS) 250 13,2 285 240 8 x 22150 / 150 / 16 HKS-R (oder -RS) 250 13,4 285 240 8 x 22150 / 160 / 16 HKS-R (oder -RS) 250 13,5 285 240 8 x 22175 / 100 / 10 HKS-R (oder -RS) 334 13,7 315 270 8 x M20
DN / BL / PN wirks. Gewicht Flansche 1)
Flche Abmessungen mmBellow size / Lenght / Press. nom. Effect. Weight DIN Flanges 1)
DN / BL / PN area appr. Measurements mm
Q : cm2 = kg D k l x
200 / 130 / 10 HKS-R (oder -RS) 400 17,6 340 295 8 x 22200 / 150 / 10 HKS-R (oder -RS) 400 18,0 340 295 8 x 22200 / 160 / 10 HKS-R (oder -RS) 400 18,1 340 295 8 x 22200 / 130 / 16 HKS-R (oder -RS) 400 17,6 340 295 12 x 22200 / 150 / 16 HKS-R (oder -RS) 400 18,0 340 295 12 x 22200 / 160 / 16 HKS-R (oder -RS) 400 18,1 340 295 12 x 22250 / 130 / 10 HKS-R (oder -RS) 600 22,5 395 350 12 x 22250 / 200 / 10 HKS-R (oder -RS) 600 23,0 395 350 12 x 22250 / 130 / 16 HKS-R (oder -RS) 600 24,3 405 355 12 x 26250 / 200 / 16 HKS-R (oder -RS) 600 25,0 405 355 12 x 26300 / 130 / 10 HKS-R (oder -RS) 800 26,0 445 400 12 x 22300 / 200 / 10 HKS-R (oder -RS) 800 26,6 445 400 12 x 22300 / 130 / 16 HKS-R (oder -RS) 800 32,0 460 410 12 x 26300 / 200 / 16 HKS-R (oder -RS) 800 32,5 160 410 12 x 26350 / 100 / 10 HKS-R (oder -RS) 1000 26,9 505 460 16 x M20350 / 200 / 10 HKS-R (oder -RS) 1000 29,5 505 460 16 x 22400 / 200 / 16 HKS-R (oder -RS) 1375 37,5 565 515 16 x 26500 / 200 / 16 HKS-R (oder -RS) 2185 47,0 670 620 20 x 26600 / 200 / 16 HKS-R (oder -RS) 3080 76,0 780 725 20 x 30700 / 250 / 10 HKS-R (oder -RS) 4800 134,0 895 840 24 x 30700 / 275 / 10 HKS-R (oder -RS) 4800 134,0 895 840 24 x 30700 / 300 / 10 HKS-R (oder -RS) 4800 134,0 895 840 24 x 30800 / 250 / 10 HKS-R (oder -RS) 5440 176,0 1015 950 24 x 33900 / 300 / 10 HKS-R (oder -RS) 7100 244,0 1115 1050 28 x 33
1000 / 300 / 10 HKS-R (oder -RS) 8700 289,0 1230 1160 28 x 33
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60
GummikompensatorenRubber Expansion Joint
31
HKS HKS
DN / BL / PN wirks. Gewicht axial lateral angular Nenn-Flche druck
Bellow size / Lenght / Press. nom. Effect. WeightDN / BL / PN area appr.
Q : cm2 = kg 30 Bar b
25 / 130 / 16 HKS G, GS, Grn, Wei 10 2,5 30 30 35 16 66
32 / 130 / 16 HKS G, GS, Grn, Wei 15 2,7 30 30 35 16 66
40 / 130 / 16 HKS G, GS, Grn, Wei 20 4,0 30 30 35 16 76
50 / 130 / 16 HKS G, GS, Grn, Wei 30 4,5 30 30 35 16 90
65 / 130 / 16 HKS G, GS, Grn, Wei 50 5,0 30 30 30 16 105
80 / 130 / 16 HKS G, GS, Grn, Wei 85 6,5 30 30 30 16 116
100 / 130 / 16 HKS G, GS, Grn, Wei 125 8,0 30 30 25 16 138
125 / 130 / 16 HKS G, GS, Grn, Wei 185 9,5 30 30 25 16 165
150 / 130 / 16 HKS G, GS, Grn, Wei 250 13,2 30 30 15 16 190
200 / 130 / 10 HKS G, GS, Grn, Wei 400 17,6 30 30 10 16 250
250 / 130 / 10 HKS G, GS, Grn, Wei 600 22,5 30 30 10 16 300
300 / 130 / 10 HKS G, GS, Grn, Wei 800 26,0 30 30 5 16 350
350 / 200 / 10 HKS G, GS, Grn, Wei 1000 29,5 20 30 8 16 395
400 / 200 / 10 HKS Grn, Wei, Gelb 1375 37,5 -50 +30 30 6 10 455
500 / 200 / 10 HKS Grn, Wei, Gelb 2185 47,0 -50 +30 30 6 10 555
600 / 200 / 10 HKS Grn, Wei, Gelb 3080 76,0 -50 +30 30 6 10 675
700 / 250 / 10 HKS Grn, Wei, Gelb 4800 134,0 25 20 6 10 775
700 / 275 / 10 HKS Grn, Wei, Gelb 4800 134,0 25 20 6 10 775
700 / 300 / 10 HKS Grn, Wei, Gelb 4800 134,0 35 30 8 10 775
800 / 250 / 10 HKS Grn, Wei, Gelb 5440 176,0 40 35 10 10 880
900 / 300 / 10 HKS Grn, Wei, Gelb 7100 244,0 30 20 6 10 980
1000 / 300 / 10 HKS Grn, Wei, Gelb 8700 289,0 30 20 4 10 1080
Typ HKS WeiInnenschicht: Nitril weiDrucktrger: NYLONCORDAuenschicht: ChloropreneFlansche: St. 37, verzinkt
und gelb chromatiert
Liner: white NBRReinforcem.: NyloncordCover: ChloropreneFlanges: carbon steel,
zinc plated
Typ HKS GrnInnenschicht: HypalonDrucktrger: NYLONCORDAuenschicht: HypalonFlansche: St. 37.2, verzinkt
und gelb chromatiert
Liner: Hypalon (CSM)Reinforcem.: NyloncordCover: Hypalon (CSM)Flanges: carbon steel,
zinc plated
Typ HKS G + GSInnenschicht: NBR (Nitril), nahtlos, elektrisch leitfhigDrucktrger G: NYLONCORDDrucktrger GS: STAHLCORDAuenschicht: Cloroprene CR, elektrisch leitfhig 103-106 OhmMarkierung: gelber Markenring, HKS PN 16, HerstelldatumFlansche: drehbar, Stahl St. 37.2, verzinkt und gelb chromatiert
Liner: NBR (nitrile), seamless, electrically conductiveReinforcement: Nylon textile cord, warmth stabilised, NBR rubberizedCover: Chloroprene CR, electrical conductive 103-106 OhmStamping: yellow band, HKS size - DIN PN 16, production dateFlanges: swiveling, carbon steel, galvanized + yellow chromated
HKS GS Reinforcement: Steel cord
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-6032
HKS-Gummikompensator DN 450 DN 3200HKS Rubber Expansion DN 450 DN 3200
Baulnge Dehnung Movement
DN Length PN F D AXIAL () mm LATERAL () ANGULAR ()
mm Inch mm bar mm mm () (+) mm
450 18 250 10 12 12 40 10 30 6
500 20 250 10 12 12 40 10 30 6
600 24 250 10 12 12 40 10 30 6
700 28 250 10 15 15 40 10 30 6
800 32 300 10 15 15 40 10 30 6
900 36 300 10 15 15 40 10 30 6
1.000 40 300 8 15 15 35 10 30 6
1.100 44 350 8 15 15 35 10 25 5
1.200 48 350 8 15 15 35 10 25 5
1.300 52 350 8 15 15 35 10 25 4
1.400 56 350 8 15 15 35 10 25 4
1.500 60 350 8 20 20 35 10 25 4
1.600 64 350 6 20 20 35 10 25 4
1.800 72 350 6 20 20 35 10 25 3
2.000 80 350 6 20 20 35 10 25 3
2.200 88 350 6 25 25 30 10 25 2
2.400 96 350 4 25 25 30 10 25 2
2.500 100 350 4 25 25 30 10 25 2
2.600 104 350 4 25 25 30 10 25 1,5
2.800 112 350 3 25 25 30 10 25 1,5
3.000 120 350 3 25 25 30 10 25 1,5
3.200 128 350 3 25 25 30 10 25 1,5
Gummi-balg
Stahl-flansch
GummibalgHKS Rot = EPDMHKS Gelb = NITRILHKS Grn = HYPALONHKS Schwarz = CLOROPRENE
RubberbellowHKS Red = BUTYL/EPDMHKS Yellow = NITRILEHKS Green = HYPALONHKS Black = CLOROPRENE
1)
1) andere Baulngen mglich (auf Anfrage)
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60
Gummikompensatoren ZeugnisseRubber Expansion Joint Certificate
33
Folgende Abnahmezertifikate liegen vor: DVGW TV BWB ABS USCG BV
LR GL USSR
Register of Shipping DNV RINA
GUMMI-Kompensatoren HKS Typ HZHKSSanitr + Heizung + RohrleitungsbauLebensmittel + Chemie + Solarindustrie
HZRFr Heizungen fr 10-jhrige Betriebsdauer. Nicht fr lhaltige Mediengeeignet. Werkstoff: EPDM/Stahlcord/EPDM
HZBFr kaltes und warmes Wasser, Brauchwasser, Sure, Laugen, Esterund Ketone. Werkstoff: IRN/Nyloncord/IR
HZGFr Stadt-, Erdgas, Treibstoffe, Schmierle, Heizl, Khlwasseremul-sionen und Seewasser mit lrckstnden. Werkstoff: NBR/Nyloncord/NBR
HZWFr Nahrungsmittel- und Getrnkeindustrie.Werkstoff:NR/Nyloncord/CR
RUBBER Expansion Joint Type HZHKSExtremely flexible high pressure version for all industrie, for heatings,heat pumps, hours water pipes, pipe lines.
HZRFor heating systemsMaterial: EPDM/Steelcord/EPDM
HZBFor cold and warm water, drinking water, acids and bases, alcohol,ester and ketones. Not for oil. Material: IRN/Nyloncord/IR
HZGFFor natural gas, citygas, mineral oil, power fuel, seawater with oil,coolring water emulsion. Werkstoff: NBR/Nyloncord/NBR
HZWFor food stuff and beverage industries, fatty food.Werkstoff:NR/Nyloncord/CR
Rohrverbindung Typ HKS RVGummi-Metall-Rohrverbindung zur Unterbrechung von Geruschenund Oberflchenschwingungen in Rohrleitungen an Pumpen, Maschi-nen und Apparaten.Mit TV-Eignungsbescheinigung zum Einsatz in Heizungsanlagen mit100/110 C und 10/6 bar. Werkstoff: Gummiteile EPDM, Flanschringeaus Aluminium mit Stahlgewindeeinsatz.
Pipe Joints Type HKS RVRubber-to-metall borned Pipe Joint for absorbing noise, vibration andsounds conducted through pipes, pumps and machines. With TV-certificate for heatings with 100/110 C and 10/6 bar.Material: Rubber parts, EPDM/flange rings aluminium with steel threadbush.
Balg-Abmessungen GesamtlngeBellow-size total-lenght
DN BL A Ausf. A Ausf. BZoll mm mm mm mm
20 3/4 130 55 228 18625 1 130 65 236 192
32 11/4 130 78 246 19640 11/2 130 90 250 20250 2 130 109 255 215
Abmessungen / Dimensions beiderseits Gewindebohrungen / both sides with thread boresnach PN 6 PN 10
DN B Druck/pressure D mm LK mm d mm n D mm LK mm d mm n
20 70 12 90 65 M 10 4 105 75 M 12 425 70 12 100 75 M 10 4 115 85 M 12 435 70 12 120 90 M 12 4 140 100 M 16 440 70 12 130 100 M 12 4 150 110 M 16 4
50 70 12 140 110 M 12 4 165 125 M 16 465 70 12 160 130 M 12 4 185 145 M 16 480 70 12 190 150 M 16 4 200 160 M 16 8
100 70 10 210 170 M 16 4 220 180 M 16 8125 70 10 240 200 M 16 8 250 210 M 16 8150 70 10 265 225 M 16 8 285 240 M 20 8200 70 10 340 295 M 20 8
Zulassung der Bundesanstaltfr Schallschutz u. Isolierung
BSI
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-6034
ANGULAR GUMMIKOMPENSATOR FR KW ALTBACH DN 10/DN 1400ANGULAR RUBBER EXPANSION JOINT PN 10/DN 1400
KARDANGELENK GUMMIKOMPENSATOR PN 16/DN 1400CARDAN RUBBER EXPANSION JOINT FOR KW ALTBACH PN 16/DN 1400
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60
Kompensatoren aus Gewebe, Teflon, EPDM-HypalonExpansion Yoint: Teflon - EPDM - Hypalon - PE
35
Kompensatoren
Die allgemeinauftretendenBewegungen sindnebenstehendaufgefhrt.
Auch alle anderenBewegungsarten
werden von HKS-Kompensatoren
kompensiert
KonstruktionsbeispieleNachstehend abgebildete Konstruktionen zeigen einige standardardisierte HKS-Kompensatoren-Typen. Neben diesen Typen, knnen HKS-Gewerbe-Kompensatoren in jeder Gre und Form ge-fertigt werden. Rund, eckig, oval rund auf eckig oder nach Ihrer Zeichnung ist kein Problem.
Formgebung und BewegungDie Form des Kompensators ist weitgehend von der Bewegung abhngig. Vorallem bei einer Achsen-vernderung ist durch die notwendige Materialvernderung oftmals eine Falte oder Welle notwendig.
Nutzen Sie unsere Erfahrungmit modernen Werkstoff-Kombinationen
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60
EXPAN 2000 von DN 50 DN 2500EXPAN 2000 from DN 50 up to DN 2500
36
Metall Balg DN 400 vielwandigMaterial 1.4541 8 x 1 mm
406
Metall Balg DN 400 vielwandigMaterial 1.4541 8 x 1 mm
Metall Balg DN 400 vielwandigMaterial 1.4541 8 x 1 mm
440 460
406
Die Expan 2000 ist eine der modernsten Metallbalg-Verformungsmaschinen Europas. Hier knnen Metallblge mit einerWandstrke von 10 x 1 mm verformt werden. Dieser Halbautomat verfgt ber ein neu entwickeltes elektronisches Me-verfahren, um die Wellenverformung optimal zu berwachen. Um bei gleicher Axialbewegung krzere Baulngen zu er-reichen, kann eine Wellentiefe von 65 mm eingestellt werden.
The EXPAN 2000 is one of the modernst bellow-forming-machines in Europe. The machine is able to produce bellowswith a wall-thickness of 10 x 1 mm. This semi-automatic machine is provided with a new developed electronic measuringmethod to supervise the corrugated deformation optimal. To reach shorter lenghts by identical axialmoverments a wavedepth of 65 mm can be adjusted.
406
DN 400
8 x 1mm!
506
Expansion bellow multiplay
HKS GmbH 18057 Rostock Schonenfahrerstrae 1 Tel. +49 (0) 381 865160-0 Fax +49 (0) 381 865160-60
ROLLFORMER zur Optimierung der WellenformerRolling former for the optimization of the convolution mode
37
HKS-Eckentlasteter-Kompensator DN 2500, Baulnge 6970 mm, ausgelegt nach EJMA fr: Druck = +/- 1 bar, Temperatur = 80C, Medium = Kondensat,
axiale Dehnung = 25 mm und gleichzeitig laterale Dehnung = 25 mm
Recommended