Hilly LowsThe trouble with construction in hilly areas
The hills are tough task masters..after all they were built to defend
against invasion..
And now here we are constructing on it..but there’s more to why it’s difficult to construct on the hills..
Hilly Challenges
Problems encountered during construction of foundation depend upon type of foundation, soil strata encountered, equipment/plant deployed and logistical problems.
• Extreme temperature zones• Problematic labour procurement• Insufficient safety measures - Landslide or
debris flow, deep gorges• Sharp turn on highways • Ineffectual material transportation• Insubstantial waste deployment
• Construction in hilly terrain is more expensive than building on a flat
area because of the cutting and filling as the foundation has to go
deeper up to the rocky part so that the structure stands on a firm
ground.
• The materials used when constructing on a hill are the same: cement,
reinforcement bars, sand and binding wire. However, the quantity and
quality of the materials is much, much more. For example, the
reinforcement bars are bigger, increasing the total cost.
• Before construction commences i.e. the cutting and filling is done, the
structural engineer has to visit the site to make an accurate design of the
detailed architectural drawing. The structural engineer gives his designs
depending on the type of soil on the site.
• Waste management is a challenging issue when it comes to construction
in hilly terrain. If not addressed in the right way, it may become the major
cause of pollution of all the critical riverine systems and valleys.
• If burning is adopted as way to dispose waste, it would pollute the air
and contribute towards warming of the localized climate. For
segregation, recycling and reuse of municipal solid and liquid waste.
Perks of Tiscon Readybuild
• Easier material transportation as Tiscon Readybuild rebars come in
kits already cut and bent as per requirement
• Low dependence on manual labour low labour involvement
• High safety for labour involved
• Better time management as Readybuild is delivered within a week
from design finalization
• Superior quality material used as Tata Tiscon rebars are made from
virgin iron ore, and it is cut and bent by high precision machines
• Better inventory management and easier scrap disposal
• Cost-saving due to minimal wastage
Is your project Tiscon Readybuild healed?
Get in touch http://readybuild.tatatiscon.co.in/