Handmade jewelry necklace pendants for women
Necklace and pendants are among the trendiest types
of handmade jewelry. They can be worn by both men
and women and children as well. What’s more, as
being designed in various style and patterns, necklace
pendants for women are available for sale at most
jewelry retailers and stores. However, in my case, I’d
rather do my own pieces rather than buy them, and
here is a sample among my ideas.
Materials for this handmade jewelry:
14mm Natural Lava Bead
10mm Turquoise Bead
2mm Aluminum Wire
0.5mm Brass Wire
Eyepin
Suede Cord
Flat Nose Plier
Round Nose Plier
Side Cutting Plier
Instructions for making necklace pendants for women:
Step 1: create each necessary component
Need to add something special to your outfits? You can make a change by creating this handmade jewelry
necklace. This post is exactly about making creative necklace pendants for women.
1. Tassel
Take 5 stripes of suede cord, each 10cm long. Fold
in half as picture shows.
Overlap the 5 pieces and hold them in place 2cm
from the folded location.
Cut a long brass wire piece and pass it through the
loop at the top.
Take the left tip to the right side. Leave a short
segment to form a loop.
Twist the two wire ends twice, and then wrap the
excess tails around the folded locations.
Tuck the sharp tips of the wire in the coils and this
is your tassel.
2. Decorative Wire Wrapped Bead
Take another fairly long piece of brass wire
and a lava bead of your choice.
Pinch the bead with fingers and thread the
wire through its hole.
Gather the two ends on the right side, twist
one or two times.
Start to wrap the wire ends around the
bead.
The pattern may depend on your
preference. Each time change the direction
and anchor the coils firmly.
3. Make the connective parts
String the wire wrapped lava bead and turquoise bead onto an eyepin respectively. Loop the other
side.
Step 2: create a necklace hoop
Measure the circumference of the neck. Then, snip
a 2mm aluminum wire section, make it 3~4cm
longer than that.
Curve one end into an S-hook pattern and make a
hook on the other end.
Step 3: assemble the necklace
pendants for women
Open the loops of eyepins and hook the turquoise
bead, lava bead and tassel one after one.
At last, slide the pendant onto the blank necklace
hook.
Congratulations!
In this necklace pendant for women tutorial, I made a
feminine tassels and a cool wire wrapped necklace base.
You can however use all sorts of wires and cords to make
your handmade jewelry long and bold, or short and dainty.
Have a whale of a time!
Shop for the turquoise beads welcome to visit our webpage at:
http://www.pandahall.com/beads/wholesale-Turquoise/0-286-1.html