Fire
sto
p S
yste
ms G
uid
e fo
r Sp
ec
ifiers
2
010
to 2
011 E
ditio
n
In the US: Hilti, Inc. P.O. Box 21148 Tulsa, OK 74121Customer Service: 1-800-879-8000en espaol: 1-800-879-5000Fax: 1-800-879-7000
www.us.hilti.com
Hilti is an equal opportunity employer.Hilti is a registered trademark of Hilti, Corp.Copyright 2010 by Hilti, Inc. (U.S.)H210S 3427488 07/10 DBS
The data contained in this literature was current as of the date of publication. Updates and changes may be made based on later testing. If verification is needed that the data is still current, please contact the Hilti Technical Support Specialists at 1-800-879-8000. All published load values contained in this literature represent the results of testing by Hilti or test organizations. Local base materials were used. Because of variations in materials, on-site testing is necessary to determine performance at any specific site. Laser beams represented by red lines in this publication. Printed in the United States
*14001 US only
In Canada: Hilti (Canada) Corporation2360 Meadowpine Blvd. Mississauga, Ontario, L5N 6S2 Customer Service: 1-800-363-4458 Fax: 1-800-363-4459
www.hilti.ca
Firestop Systems Guide for Specifiers2010 to 2011
Saving lives through innovation and education.Hilti. Outperform. Outlast.
Quick Reference
Firestop Submittal Builderwww.HiltiFirestopSubmittals.comSubmittal Builder Support: 1-877-445-8471
Hilti.Outperform.Outlast.
Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide
Hilti. Outperform. Outlast.
1 Search and Select UL- and Intertek-listed Firestop Systems
2 Select Product Data / MSDS / Certificate of Compliance
3Generate single-file, comprehensive Firestop Submittal
You can then Email Download Print Share (via a link)
any of your submittals!
Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide
Hilti. Outperform. Outlast.
C-AJ-0055 . . . . . . 68C-AJ-0082 . . . . . . 69C-AJ-0090 . . . . . . 70C-AJ-0097 . . . . . . 71C-AJ-1140 . . . . . . 72C-AJ-1149 . . . . . . 73C-AJ-1184 . . . . . . 74C-AJ-1226 . . . . . . 75C-AJ-1291 . . . . . . 76C-AJ-1346 . . . . . . 77C-AJ-1372 . . . . . . 78C-AJ-1380 . . . . . . 79C-AJ-1382 . . . . . . 80C-AJ-1421 . . . . . . 81C-AJ-1425 . . . . . . 82C-AJ-1453 . . . . . . 83C-AJ-1498 . . . . . . 84C-AJ-1513 . . . . . . 85C-AJ-1517 . . . . . . 86C-AJ-1575 . . . . . . 87C-AJ-1597 . . . . . . 89C-AJ-2109 . . . . . . 91C-AJ-2110 . . . . . . 93C-AJ-2118 . . . . . . 95C-AJ-2167 . . . . . . 96C-AJ-2217 . . . . . . 97C-AJ-2271 . . . . . . 98C-AJ-2336 . . . . . 100C-AJ-2342 . . . . . 102C-AJ-2371 . . . . . 104C-AJ-2392 . . . . . 106C-AJ-2402 . . . . . 107C-AJ-2407 . . . . . 108C-AJ-2451 . . . . . 109C-AJ-2468 . . . . . 110C-AJ-2567 . . . . . 111C-AJ-3095 . . . . . 112C-AJ-3180 . . . . . 113C-AJ-3181 . . . . . 114C-AJ-3193 . . . . . 115C-AJ-3208 . . . . . 116C-AJ-3210 . . . . . 117
C-AJ-3216 . . . . . 118C-AJ-3239 . . . . . 119C-AJ-3283 . . . . . 120C-AJ-4034 . . . . . 122C-AJ-4035 . . . . . 124C-AJ-4071 . . . . . 125C-AJ-4077 . . . . . 126C-AJ-5048 . . . . . 128C-AJ-5061 . . . . . 129C-AJ-5090 . . . . . 130C-AJ-5091 . . . . . 131C-AJ-5096 . . . . . 132C-AJ-5198 . . . . . 133C-AJ-5277 . . . . . 134C-AJ-5301 . . . . . 135C-AJ-5320 . . . . . 136C-AJ-6006 . . . . . 138C-AJ-6017 . . . . . 139C-AJ-6036 . . . . . 140C-AJ-7046 . . . . . 141C-AJ-7051 . . . . . 142C-AJ-7084 . . . . . 143C-AJ-7104 . . . . . 144C-AJ-7111 . . . . . 145C-AJ-8056 . . . . . 146C-AJ-8095 . . . . . 148C-AJ-8096 . . . . . 149C-AJ-8099 . . . . . 152C-AJ-8100 . . . . . 154C-AJ-8110 . . . . . 155C-AJ-8143 . . . . . 157C-AJ-8148 . . . . . 159C-AJ-8177 . . . . . 160C-AJ-8178 . . . . . 163C-BJ-1046 . . . . . 165C-BJ-1055 . . . . . 166C-BJ-2014 . . . . . 167C-BJ-2017 . . . . . 168C-BJ-2021 . . . . . 169C-BJ-3024 . . . . . 170C-BJ-5013 . . . . . 171C-BJ-5015 . . . . . 172
C-BJ-5018 . . . . . 173F-A-0005 . . . . . . 174F-A-0012 . . . . . . 175F-A-0014 . . . . . . 176F-A-1016 . . . . . . 177F-A-1017 . . . . . . 179F-A-1022 . . . . . . 181F-A-1023 . . . . . . 182F-A-1066 . . . . . . 183F-A-1105 . . . . . . 184F-A-1119 . . . . . . 185F-A-2025 . . . . . . 186F-A-2053 . . . . . . 188F-A-2054 . . . . . . 190F-A-2058 . . . . . . 192F-A-2065 . . . . . . 193F-A-2066 . . . . . . 195F-A-2068 . . . . . . 197F-A-2071 . . . . . . 198F-A-2075 . . . . . . 199F-A-2092 . . . . . . 200F-A-2093 . . . . . . 202F-A-2094 . . . . . . 203F-A-2103 . . . . . . 204F-A-2141 . . . . . . 205F-A-2154 . . . . . . 207F-A-2156 . . . . . . 209F-A-3007 . . . . . . 210F-A-3033 . . . . . . 212F-A-4003 . . . . . . 213F-A-5015 . . . . . . 214F-A-5016 . . . . . . 215F-A-5017 . . . . . . 216F-A-5018 . . . . . . 217F-A-5032 . . . . . . 218F-A-5036 . . . . . . 219F-A-5042 . . . . . . 220F-A-6002 . . . . . . 221F-A-8012 . . . . . . 222F-A-8016 . . . . . . 224F-B-1009 . . . . . . 225F-B-1010 . . . . . . 226
F-B-2029 . . . . . . 227F-B-2045 . . . . . . 229F-C-1009 . . . . . . 230F-C-1059 . . . . . . 231F-C-1106 . . . . . . 232F-C-2030 . . . . . . 233F-C-2128 . . . . . . 235F-C-2142 . . . . . . 236F-C-2203 . . . . . . 237F-C-2204 . . . . . . 238F-C-2232 . . . . . . 239F-C-2270 . . . . . . 241F-C-2310 . . . . . . 242F-C-2389 . . . . . . 243F-C-3012 . . . . . . 244F-C-3044 . . . . . . 245F-C-3074 . . . . . . 246F-C-5004 . . . . . . 247F-C-5036 . . . . . . 248F-C-5037 . . . . . . 249F-C-5065 . . . . . . 250F-C-5066 . . . . . . 251F-C-7013 . . . . . . 252F-C-7025 . . . . . . 253F-C-8026 . . . . . . 254F-C-8032 . . . . . . 255F-E-1004 . . . . . . 256F-E-2027 . . . . . . 257F-E-3005 . . . . . . 259F-E-5002 . . . . . . 260F-E-5004 . . . . . . 261W-J-1067. . . . . . 262W-J-1068. . . . . . 263W-J-1116. . . . . . 264W-J-1124. . . . . . 265W-J-1128. . . . . . 266W-J-1191. . . . . . 267W-J-1202. . . . . . 268W-J-2072. . . . . . 269W-J-2091. . . . . . 270W-J-2108. . . . . . 271W-J-2205. . . . . . 272
W-J-3036. . . . . . 274W-J-3060. . . . . . 275W-J-3092. . . . . . 276W-J-3143. . . . . . 277W-J-3167. . . . . . 278W-J-4029. . . . . . 280W-J-4048. . . . . . 282W-J-4050. . . . . . 284W-J-5041. . . . . . 288W-J-5042. . . . . . 289W-J-5140. . . . . . 290W-J-5145. . . . . . 291W-J-7022. . . . . . 292W-J-7029. . . . . . 293W-J-7109. . . . . . 294W-J-7112. . . . . . 296W-J-8007. . . . . . 297W-J-8039. . . . . . 299W-J-8043. . . . . . 300W-J-8047. . . . . . 302W-L-0014 . . . . . 305W-L-1054 . . . . . 306W-L-1164 . . . . . 307W-L-1206 . . . . . 308W-L-1243 . . . . . 309W-L-1249 . . . . . 310W-L-1252 . . . . . 311W-L-1297 . . . . . 312W-L-1380 . . . . . 313W-L-1389 . . . . . 314W-L-1408 . . . . . 315W-L-1410 . . . . . 316W-L-2078 . . . . . 317W-L-2128 . . . . . 319W-L-2165 . . . . . 320W-L-2186 . . . . . 321W-L-2244 . . . . . 322W-L-2245 . . . . . 323W-L-2330 . . . . . 324W-L-2340 . . . . . 325W-L-2377 . . . . . 326W-L-2406 . . . . . 327
W-L-2411 . . . . . 329W-L-2467 . . . . . 331W-L-3065 . . . . . 332W-L-3071 . . . . . 334W-L-3111 . . . . . 335W-L-3122 . . . . . 336W-L-3139 . . . . . 337W-L-3161 . . . . . 338W-L-3213 . . . . . 339W-L-3272 . . . . . 340W-L-3320 . . . . . 341W-L-3334 . . . . . 343W-L-4011 . . . . . 345W-L-4038 . . . . . 346W-L-4048 . . . . . 348W-L-4050 . . . . . 350W-L-4060 . . . . . 354W-L-5028 . . . . . 355W-L-5029 . . . . . 356W-L-5047 . . . . . 357W-L-5096 . . . . . 358W-L-5143 . . . . . 359W-L-5223 . . . . . 360W-L-5225 . . . . . 361W-L-5244 . . . . . 362W-L-5257 . . . . . 364W-L-6019 . . . . . 365W-L-7042 . . . . . 366W-L-7059 . . . . . 367W-L-7130 . . . . . 368W-L-7153 . . . . . 369W-L-7155 . . . . . 370W-L-7156 . . . . . 372W-L-8014 . . . . . 373W-L-8019 . . . . . 375W-L-8047 . . . . . 378W-L-8059 . . . . . 379W-L-8071 . . . . . 380W-L-8079 . . . . . 382W-L-8087 . . . . . 384CLIV . . . . . . . . . . 387
Through-Penetration Page 68
System Page System Page System Page System Page System Page System Page
FF-D-1013 . . . . . 389FF-D-1039 . . . . . 390FF-D-1047 . . . . . 391FF-D-1087 . . . . . 392FW-D-1013 . . . . 393FW-D-1037 . . . . 394FW-D-1047 . . . . 395FW-D-1071 . . . . 396HW-D-0042 . . . . 397HW-D-0045 . . . . 399HW-D-0049 . . . . 400
HW-D-0081 . . . . 402HW-D-0181 . . . . 403HW-D-0184 . . . . 404HW-D-0209 . . . . 405HW-D-0218 . . . . 406HW-D-0225 . . . . 408HW-D-0258 . . . . 409HW-D-0259 . . . . 411HW-D-0264 . . . . 413HW-D-0268 . . . . 414HW-D-0285 . . . . 415
HW-D-0286 . . . . 416HW-D-0292 . . . . 417HW-D-0294 . . . . 418HW-D-0324 . . . . 419HW-D-0342 . . . . 420HW-D-0388 . . . . 421HW-D-0389 . . . . 423HW-D-0440 . . . . 425HW-D-0541 . . . . 426HW-D-1037 . . . . 428HW-D-1042 . . . . 429
HW-D-1058 . . . . 430HW-D-1066 . . . . 431HW-D-1067 . . . . 432HW-D-1068 . . . . 433HW-D-1069 . . . . 434HW-D-1078 . . . . 435HW-S-0069 . . . . 436WW-D-0017. . . . 438WW-D-0032. . . . 439WW-D-0040. . . . 440WW-D-0067. . . . 441
WW-D-1047. . . . 442WW-D-1080. . . . 443HI/JS 120-05 (CEJ 127 P) . . . . 444HI/PHV 120-03 (CEJ 245 P) . . . . 447HI/BP 180-01 (CEJ 307 P) . . . . 449HI/BP 120-02 (CEJ 400 P) . . . . 453
HI/BP 120-03 (CEJ 421 P) . . . . 455CW-D-1003 . . . . 459CW-D-2026 . . . . 461CW-D-2027 . . . . 464CW-D-2046 . . . . 467HI/BP 150-01. . . 470HI/BP 120-05. . . 473
System Page System Page System Page System Page System Page System Page
Joint Page 389
1IntroductionA
ppilcations/Products
Selector Guide
Through-Penetration
JointEstim
ating Tables/Tech Data
With you every step of the way.At Hilti, our people and products are with you every step of the way. From design to construction, we help make your team more productive every day with expert technical advice, reliable products, prompt delivery, ongoing research and development, and outstanding service.
Fire Protection Specialists offer firestop consultation and training
Fire Protection Engineers provide Engineering Judgments for unique and complex applications
Hilti Accredited Firestop Specialty Contractors (HAFSC) are an independent professional firestop installers who have been provided specialized training by Hilti. To learn more, see page 542.
Benefits of using a HAFSC:Allowstradespeopletofocusontheirareaofexpertise,leavingfirestoppingto passivefireprotectionspecialists
Providesinglecontractoraccountabilityforallfirestopapplications
Promotehassle-freeinspectionbyofficialswhoknowandtrustprofessional firestopinstallers
Increaseyourconfidencethatallfirestoppingiscompletedcorrectlythefirst time
Available nearby.Support Firestop Design Center Support 1-800-879-8000 Application assistance and technical support Firestop Submittal Builder Support 1-877-445-8471
Online Firestop Design Center www.us.hilti.com/firestop Anytime access for online ordering, up-to-date product and application information Firestop Submittal Builder www.hiltifirestopsubmittals.com Hilti Accredited Firestop Specialty Contractors www.hiltifsc.com
Hilti,Inc.(U.S.)1-800-879-8000www.us.hilti.comenespaol1-800-879-5000HiltiFirestopSystemsGuide
Hilti. Outperform. Outlast.
Hilti.Outperform.Outlast.
2Hilti. Outperform. Outlast.
Hilti,Inc.(U.S.)1-800-879-8000www.us.hilti.comenespaol1-800-879-5000HiltiFirestopSystemsGuide
Introduction . . . . . . . . . . 1
Dedicated to Life Safety . . . . . . . . . . 4
Application Review, Products and Selection Chart . . . . . . . . . . 8
Firestop Systems Application Review . . . . . . . . . .10Product Information and Installation Instructions . . . . . . . . . .15
Product Ordering Information . . . . . . . . . .42Firestop Selection Chart . . . . . . . . . .50
Firestop System Drawings . . . . . . . . . .66
Most Common Systems Directory . . . . . . . . . .66Through-Penetration Drawings . . . . . . . . . .68
Alpha-Numeric System Directory . . . . . . . . . 545Joint Drawings . . . . . . . . . 389
Estimating Tables and Technical Data . . . . . . . . . 478
Package Volume and Estimating Tables . . . . . . . . . 480FirestopTermsandDefinitions . . . . . . . . . 485
Understanding System Nomenclature . . . . . . . . . 487Material Safety Data Sheet (MSDS) . . . . . . . . . 488
ULCertificatesofComplianceSheets . . . . . . . . . 530Terms and Conditions of Sale . . . . . . . . . 541
Hilti Firestop Specialty Contractor Program . . . . . . . . . 542Engineering Judgment (EJ) Process and Form . . . . . . . . . 543
Continuing Education Course
Course name: Firestop A Life Safety Issue
Provides one hour of AIA and state credit QualifiesforHSW FREE
Presented by: Chad Stroike, CFPS, Hilti, Inc.
Description: Provides an overview of fire safe building construction, how to provide proper firestop protection via model building codes, and specifications. Proper and improper firestop installations, liability issues, and types of fire/smoke assemblies are also reviewed.
To take this course: www.aecdaily.com/en/1595881
Firestop system selection and specification made easy!The Hilti Firestop Design Center makes finding suitable firestop systems, solving application problems and downloading CAD-ready drawings easy.
Access our complete library of detailed drawings and specifications including: Samplespecifications System drawings Product information Firestoptermsanddefinitions Building regulations and codes Project references Firestop FAQ Search by application: Joints or Through-Penetrations Designandspecificationresources System drawing search Featured new products
Visit the Hilti Firestop Design Center Register today at www.us.hilti.com/firestop
Firestop Design Center and Continuing Education
3Hilti,Inc.(U.S.)1-800-879-8000www.us.hilti.comenespaol1-800-879-5000HiltiFirestopSystemsGuideHilti. Outperform. Outlast.
IntroductionA
ppilcations/Products
Selector Guide
Through-Penetration
JointEstim
ating Tables/Tech Data
Hilti FirestopSaving Livesthrough innovationand education
Firestop Systems Guide
Introduction . . . . . . . . . . 1
Dedicated to Life Safety . . . . . . . . . . 4
Application Review, Products and Selection Chart . . . . . . . . . . 8
Firestop Systems Application Review . . . . . . . . . .10Product Information and Installation Instructions . . . . . . . . . .15
Product Ordering Information . . . . . . . . . .42Firestop Selection Chart . . . . . . . . . .50
Firestop System Drawings . . . . . . . . . .66
Most Common Systems Directory . . . . . . . . . .66Through-Penetration Drawings . . . . . . . . . .68
Alpha-Numeric System Directory . . . . . . . . . 545Joint Drawings . . . . . . . . . 389
Estimating Tables and Technical Data . . . . . . . . . 478
Package Volume and Estimating Tables . . . . . . . . . 480FirestopTermsandDefinitions . . . . . . . . . 485
Understanding System Nomenclature . . . . . . . . . 487Material Safety Data Sheet (MSDS) . . . . . . . . . 488
ULCertificatesofComplianceSheets . . . . . . . . . 530Terms and Conditions of Sale . . . . . . . . . 541
Hilti Firestop Specialty Contractor Program . . . . . . . . . 542Engineering Judgment (EJ) Process and Form . . . . . . . . . 543
4 Hilti,Inc.(U.S.)1-800-879-8000www.us.hilti.comenespaol1-800-879-5000HiltiFirestopSystemsGuideHilti. Outperform. Outlast.
Hilti FirestopSaving Livesthrough innovationand education
Dedicated to Life Safety
Hilti is dedicated to saving lives through innovation and educationThe quality and excellence of Hilti Firestop products help ensure thatfire,smokeandtoxicgasesare contained to reduce the tragic loss of human life and property. Through a combination of superior products, advanced knowledge and unparalleled customer service we are able to provide the highest qualityfirestopsystems.
Hilti offers a comprehensive support packageThroughout the entire firestoppingprocess,whetheritisspecification,installationor inspection, Hilti will be there to offer jobsite support and expertise. Highly-trained Hilti account managers, Fire Protection Specialists, and in-house Fire Protection engineering team can help you select the correct products and systems to match yourspecificprojectneeds.Hiltihas a support package that is unmatchedinthepassivefirestopindustry.
Fire safetyFire safety is a major concern for all who are responsible for the design and specificationofnewbuildings.
Thecausesoffirearevariedandunpredictable, and often outside the controlofthedesigner.Whatcanbecontrolled,however,istheeffectoffireonce it has started.
Thecontroloffirewithinabuildingisnormally affected by a combination of activeandpassivefireprotectionsystems.
Active fire protection systemsActivefireprotectionsystemsaredesignedtodetectfire,andeitherto extinguish it by means of water sprinklers,halogeninstallationsorfireextinguishers, or to minimize its effects by smoke ventilation. Active systems are also used to assist the escape of occupants by the provision of alarms and emergency lighting.
Passive fire protection systemsPassivefireprotectionisdesignedinto the structure of the building, so thatiffirebreaksout,itiscontainedwithinafirecompartment,surroundedbyfire-resistivewallsandfloors.Forthewallsandfloorstomaintaintheirfire-resistance,however,everyopening,penetration and joint must be sealed againsttheescapeoffireandsmoke.
Intumescent fire sealsThe materials used to form the seals mustnotonlyfillallgapsatthetimeofconstruction, but also, in the event of fire,expandtocloseanyfurthergapsformed by melted components. These intumescentfireseals,ifproperlyinstalled,canhelppreventfireescapingfromacompartment for a rating period of up to four hours. This time period can prove vital in allowing occupants to escape, and firefighterstocontrolthefire.
HiltiAround the world Hilti red is a familiar sight on building sites, and the Hilti name is known and respected.
To most people, Hilti means precision tools and secure fastenings. For many years however, Hilti has applied their skills to a
critical area of construction where precision andsecurityarevital:firestopping.
Hilti Firestop SystemsTheaimofHiltifirestopsystemsistoprovidedesignersandspecifierswiththe following:
Excellencefinishedsolutionsthat match the well known, high quality standards associated with the Hilti productEasyinstallationallfirestop components are readily available and simple and fast to installTested and used worldwide Hiltioffersone-stopfirestoppingsystems tested in accordance with most relevant regulationsWiderangingsolutionsforvirtually any opening or penetration through which heat or smoke might pass, Hilti offersafirestopsolutionthatwillhelpminimizedamageintheeventofafire
Hilti and the designer/specifierToassistthedesignerorspecifierinselecting and specifying the appropriate firestopsystem,Hiltihasdevelopedtwo online tools, the Firestop Submittal Builder and the Firestop Design Center.
The Firestop Submittal Builder is an online application that provides assistance with system selection. Once the appropriate systems are selected, the application generates a professional looking submittal package with all the necessary documents.
To visit the Firestop Submittal Builder, go to www.HiltiFirestopSubmittals.com. The support team for the submittal builder can be reached at 1-877-445-8471.
The online Firestop Design Center allowsyoutoaccessspecificationtoolsand resources by application or by product names. To visit, go to www.us.hilti.com/firestop.
Hilti customized solutionsIfnoneofthestandardfirestopsystemsmeet the requirements of the design, Hilti is ready to offer their expertise and work with the designer to produce customized solutions. To learn more, see page 543.
5Hilti,Inc.(U.S.)1-800-879-8000www.us.hilti.comenespaol1-800-879-5000HiltiFirestopSystemsGuideHilti. Outperform. Outlast.
IntroductionA
ppilcations/Products
Selector Guide
Through-Penetration
JointEstim
ating Tables/Tech Data
Fire Safety Issues
Problem The illustration on the left indicates a range of typical problems facing the designer.
Construction may consist of:concretewoodgypsum
The problem areas are:1 Movement joints2 Rigid or low movement joints3 Head of wall and perimeter joints4 Metal and plastic pipes5 Plastic pipes6 Multiple penetrations, pipes and/
or cables7 Cable trays (with permanent sealing
of opening during construction, or temporary sealing allowing additional cables to be installed subsequently)
8 Cable trays (with permanent sealing of opening during construction)
9 Cables (single or bundled)10 Electrical boxes11 Heating/ventilation/air conditioning
Fire resistance ratingTohelppreventtherapidspreadoffirewithinabuilding,certainwalls,floorsandjointsarerequiredtomeetaspecificfireresistance rating the period of time during which a building component has beentestedtoconfineafireorcontinueto perform a structural function or both. Through-penetrations and joints created during the construction process require theinstallationoffirestopsystemsinordertobringthewallorfloorbackuptoitsoriginalfire-rating.
FirestoppingIt is essential that every penetration orjointinafire-ratedwallorfloorisadequately protected by sealing or firestoppingsuchthatthebuildingcomponent is restored to its original fire-ratedconditioninordertomaintaincompartmentalization. The quality and excellence of Hilti Firestop Products help ensurethatfire,smokeandtoxicgasesare contained to reduce the tragic loss of human life and damage to property.
1
2
3
4
5
6
7
8
9
10
11
6 Hilti,Inc.(U.S.)1-800-879-8000www.us.hilti.comenespaol1-800-879-5000HiltiFirestopSystemsGuideHilti. Outperform. Outlast.
Hilti Firestop Solutions
Hilti Firestop SolutionsForeachofthefirestoppingproblemsillustratedonthefacingpage,Hiltihasdesignedandtestedaspecificsolution. Not only is there a solution for each type of opening,butHiltialsooffersachoiceoffirestopsystemsforseveral applications, according to the size of the opening and whether the installation is permanent or temporary.
Hilti firestop systems are suitable for use with constructions of:
C Concrete or concrete blockG GypsumW Wood
Hilti Product Description Application F rating Page
Metallic and Non-metallic Pipes1 CP 680-P/M Cast-in Firestop Device Metal and plastic pipes with diameters up to 6" up to 4 hours 168 CP 620 Fire Foam Metal and plastic pipes (in conjunction with CP 648-E) up to 3 hours 292 CP 644 Firestop Collar Plastic pipes with diameters 8" to 10" up to 2 hours 372 CP 643N Firestop Collar Plastic pipes with diameters 6" or less up to 4 hours 367 FS-ONE Intumescent Firestop Metal and plastic pipes up to 4 hours 229 CP 604 Self-Leveling Firestop Sealant Metal pipes up to 3 hours 2512 CP 648-S FirestopWrapStrip Single wrap for plastic pipes up to 3 hours 3812 CP 648E FirestopWrapStrip Continuous wrap for plastic pipes up to 4 hours 39
Cables and Cable Trays13 CP 653 Speed Sleeve Cable bundles up to 3 hours 151 CP 680-P/M Cast-in Firestop Device Cable bundles up to 3 hours 16
10 CP 658T Firestop Plug Single or bundled cables up to 4 hours 3511 CP 675T Firestop Board Temporary and permanent sealing of cables and cable trays up to 2 hours 328 CP 620 Fire Foam Permanent sealing of cables and cable trays up to 2 hours 397 FS-ONE Intumescent Firestop Jacketed cables and cable bundles up to 4 hours 223 FS 657 Fire Block Temporary and permanent sealing of cables and cable trays up to 4 hours 314 CP 637 Firestop Mortar Permanent sealing of cables and cable trays up to 4 hours 305 CP 618 Firestop Putty Stick Single or bundled cables up to 4 hours 346 CP 617-L/XL Firestop Putty Pad Electrical boxes up to 2 hours 339 CP 604 Self-Leveling Firestop Sealant Cable bundles up to 3 hours 25
Multiple Penetrations7 FS-ONE Intumescent Firestop Metal and plastic pipes, jacketed cables and cable bundles up to 3 hours 223 FS 657 Fire Block Temporary and permanent sealing of metal and plastic pipes,
cables and cable traysup to 4 hours 31
4 CP 637 Firestop Mortar Permanent sealing of metal and plastic pipes cables and cable trays
up to 4 hours 30
1 CP 680-P/M Cast-in Firestop Device Multiple metallic and non-metallic pipes up to 3 hours 1611 CP 675T Firestop Board Temporary and permanent sealing of cables, cable trays and
metal pipesup to 2 hours 32
Heating / Ventilation / Air-conditioning7 FS-ONE Intumescent Firestop Sealing around metal ducts up to 3 hours 227 CP 601S Elastomeric Firestop Sealant Sealing around metal ducts up to 3 hours 237 CP 606 Flexible Firestop Sealant Sealing around metal ducts up to 3 hours 2411 CP 604 Self-Leveling Firestop Sealant Sealing around metal ducts up to 3 hours 25
Joints/Curtain Walls7 CP 606 Flexible Firestop Sealant Sealingfloorjoints,headofwallandwalltowalljoints up to 3 hours 247 CP 601S Elastomeric Firestop Sealant Sealingfloor,headofwallandwalltowalljoints up to 4 hours 239 CP 604 Self-Leveling Firestop Sealant Sealingfloortowalljoints(Perimeter/CurtainWalls) up to 2 hours 2514 CFS-SPWB Firestop Joint Spray Sealingheadofwall,walltowallandfloortowalls(Perimeter/
CurtainWalls)up to 4 hours 26
15 CP 767/777 Speed Plugs/Speed Strips Provides non-combustible backing for FS sealants - 28
7Hilti,Inc.(U.S.)1-800-879-8000www.us.hilti.comenespaol1-800-879-5000HiltiFirestopSystemsGuideHilti. Outperform. Outlast.
IntroductionA
ppilcations/Products
Selector Guide
Through-Penetration
JointEstim
ating Tables/Tech Data
Hilti FirestopSaving Livesthrough innovationand education
Hilti Firestop Solutions
Hilti Firestop SolutionsThe illustration on the left provides a basic guide to the range of Hilti Firestop products available for the applications shown.
1 CP 680-P/M Firestop Cast-In Device
2 CP 643N Firestop CollarCP 644 Firestop Collar
3 FS 657 Fire Block 4 CP 637 Firestop Mortar5 CP 618 Firestop Putty Stick6 CP 617 / CP 617L / CP 617XL
Firestop Putty Pad7 FS-ONE High Performance
Intumescent SealantCP 601S Elastomeric Firestop Sealant
CP 606 Flexible Firestop Sealant8 CP 620 Fire Foam9 CP 604 Self-Leveling Firestop
Sealant10 CP 658T Firestop Plug11 CP 675T Firestop Board12 CP648-E/SFirestopWrapStrip13 CP 653 Speed Sleeve14 CFS-SPWBFirestopJointSpray15 CP 767 Speed Strips
CP 777 Speed Plugs
1
2
3
4
5
6
7
77
7
7
813
9
9
9
10
1112
14
15
Applications and Products
Hilti. Outperform. Outlast.
Firestop Systems Application Review . . . . . . . . . .10
Product Information and Installation Instructions . . . . . . . . . .15
CP 653 Speed Sleeve . . . . . . . . . .15CP 680-P Cast-In Firestop Device . . . . . . . . . .16CP 680-M Cast-In Firestop Device . . . . . . . . . .16
Height Extension . . . . . . . . . .17Metal Deck Adapter . . . . . . . . . .17
Water Barrier Module . . . . . . . . . .18Top Seal Plug . . . . . . . . . .18
CP 681 Tub Box Kit . . . . . . . . . .19Closet Stub . . . . . . . . . .20
Shower and Floor Drain . . . . . . . . . .21Aerator Adapter . . . . . . . . . .21
FS-ONE High Performance Intumescent Firestop Sealant . . . . . . . . . .22CP 601S Elastomeric Firestop Sealant . . . . . . . . . .23
CP 606 Flexible Firestop Sealant . . . . . . . . . .24CP 604 Self-Leveling Firestop Sealant . . . . . . . . . .25
CFS-SP WB Firestop Joint Spray . . . . . . . . . .26CP 672 FC (Fast Cure) Speed Spray . . . . . . . . . .27
CP 777 Speed Plugs . . . . . . . . . .28CP 767 Speed Strips . . . . . . . . . .28
CP 620 Fire Foam . . . . . . . . . .29CP 637 Firestop Mortar . . . . . . . . . .30
FS 657 Fire Block . . . . . . . . . .31CP 675T Firestop Board . . . . . . . . . .32
CP 617, CP 617 L and CP 617 XL Firestop Putty Pad . . . . . . . . . .33CP 618 Firestop Putty Stick . . . . . . . . . .34
CP 658T Firestop Plug . . . . . . . . . .35CP 643N Firestop Collar . . . . . . . . . .36
CP 644 Firestop Collar . . . . . . . . . .37CP 648S Firestop Wrap Strip . . . . . . . . . .38CP 648E Firestop Wrap Strip . . . . . . . . . .39
CP 506 Smoke and Acoustic Sealant . . . . . . . . . .40CP 572 Smoke and Acoustic Spray . . . . . . . . . .41
Product Ordering Information . . . . . . . . . .42
Selection Chart . . . . . . . . . .50
9Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide Hilti. Outperform. Outlast.
IntroductionA
pplications/Products
Selector Guide
Through-Penetration
JointEstim
ating Tables/Tech Data
Hilti FirestopSaving Livesthrough innovationand education
Applications and Products
Firestop Systems Application Review . . . . . . . . . .10
Product Information and Installation Instructions . . . . . . . . . .15
CP 653 Speed Sleeve . . . . . . . . . .15CP 680-P Cast-In Firestop Device . . . . . . . . . .16CP 680-M Cast-In Firestop Device . . . . . . . . . .16
Height Extension . . . . . . . . . .17Metal Deck Adapter . . . . . . . . . .17
Water Barrier Module . . . . . . . . . .18Top Seal Plug . . . . . . . . . .18
CP 681 Tub Box Kit . . . . . . . . . .19Closet Stub . . . . . . . . . .20
Shower and Floor Drain . . . . . . . . . .21Aerator Adapter . . . . . . . . . .21
FS-ONE High Performance Intumescent Firestop Sealant . . . . . . . . . .22CP 601S Elastomeric Firestop Sealant . . . . . . . . . .23
CP 606 Flexible Firestop Sealant . . . . . . . . . .24CP 604 Self-Leveling Firestop Sealant . . . . . . . . . .25
CFS-SP WB Firestop Joint Spray . . . . . . . . . .26CP 672 FC (Fast Cure) Speed Spray . . . . . . . . . .27
CP 777 Speed Plugs . . . . . . . . . .28CP 767 Speed Strips . . . . . . . . . .28
CP 620 Fire Foam . . . . . . . . . .29CP 637 Firestop Mortar . . . . . . . . . .30
FS 657 Fire Block . . . . . . . . . .31CP 675T Firestop Board . . . . . . . . . .32
CP 617, CP 617 L and CP 617 XL Firestop Putty Pad . . . . . . . . . .33CP 618 Firestop Putty Stick . . . . . . . . . .34
CP 658T Firestop Plug . . . . . . . . . .35CP 643N Firestop Collar . . . . . . . . . .36
CP 644 Firestop Collar . . . . . . . . . .37CP 648S Firestop Wrap Strip . . . . . . . . . .38CP 648E Firestop Wrap Strip . . . . . . . . . .39
CP 506 Smoke and Acoustic Sealant . . . . . . . . . .40CP 572 Smoke and Acoustic Spray . . . . . . . . . .41
Product Ordering Information . . . . . . . . . .42
Selection Chart . . . . . . . . . .50
10 Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide Hilti. Outperform. Outlast.
Product Information
Firestop Systems Application Review Application
Met
al p
ipes
Plas
tic/g
lass
pip
es
Cab
les/
cabl
e tra
ys
Insu
late
d m
etal
pip
es
Met
al d
ucts
Mul
tiple
pen
etra
tions
Join
ts
Page Description Features Benefits
15 CP 653 Speed SleeveRe-penetrable cable management device for electrical and telecom professionals
Fast installation Low L-ratings Can be installed in wall and floor applications
Easy penetration and re-penetrationWithstands the rigors of usage and time
16 CP 680-P Cast-In Firestop DeviceA one-step cast-in firestop device for a wide variety of pipe materials and diameters
Quick and simple installation Integrated moisture and smoke sealTested in concrete floor thicknesses from 2-1/2" (63 mm)Innovative adapter for metal deck applications
Ready to use no additional caulk requiredEasy to specify, install and inspectCost effective solution
16 CP 680-M Cast-In Firestop DeviceA one-step cast-in firestop device for a wide variety of non-combustible pipe materials and diameters
Quick and simple installation Integrated moisture and smoke sealTested in concrete floor thicknesses from 2-1/2" (63 mm)Innovative adapter for metal deck applications
Ready to use no additional caulk requiredEasy to specify, install and inspectCost effective solution
17 Height Extension For use with CP 680-P/M
One extension adds up to 6" For concrete floors over 8" Positive connection system promotes a secure fit
Fast, modular installation Color coded for easier topside layout
17 Metal Deck Adapters For use with CP 680-P/M
Positive connection system promotes a secure fit to the base
Fast, modular installation Color coded for easier identification below deck
18 Water Barrier Module For use with CP 680-P/M
Available in 2", 3", 4" and 6" sizesAdds 1" to the overall height Secures to top of device
A pre-concrete casting water barrier solutionMany tested details meeting ULs Class I W-Rating
18 Top Seal Plug For use with 2 inch CP 680-P/M1/2" to 2" diameter pipes
Restricts water from flowing through pipe penetrationsEasy friction fit around pipes to create a water resistant sealForces pipe to be centered in the opening
A post-concrete casting water barrier solutionMany tested details meeting ULs Class I W-Rating
11Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide Hilti. Outperform. Outlast.
IntroductionA
pplications/Products
Selector Guide
Through-Penetration
JointEstim
ating Tables/Tech Data
Product Information
Firestop Systems Application Review Application
Met
al p
ipes
Plas
tic/g
lass
pip
es
Cab
les/
cabl
e tra
ys
Insu
late
d m
etal
pip
es
Met
al d
ucts
Mul
tiple
pen
etra
tions
Join
ts
Page Description Features Benefits
19 CP 681 Tub Box KitA unique firestop cast-in device for recessed tub drain applications
Assembles easily with solvent cement Triangular shape makes working around rebar easy3 fastening points instead of 4
Saves time and labor costs Structurally stable during concrete pouringNo special tools required for installation
20 Closet Stub Cast-In device for toilet fixtures
Durable PVC construction (ASTM 2665)Material can be attached to pipes via solvent welding or glue
Economical, dependable solution for toilets
21 Shower and Floor Drain
Cast-In device for shower/ floor drains
Material can be attached to pipes via solvent welding or glue
Economical, dependable solution for drains
21 Aerator AdapterUsed in Combination with CP 680-P/M for firestopping aerator applications
Allows for vertical/horizontal and angle movement
Creates a void in concrete that allows for simple and flexible installation
Available for 3" and 4" cast- in place devices
22
VRGIPHYL-GMILZKULXK1|R:(
==DZ|SLHXX]H
LNLUGZLORLMWI|[YEYEYKLUHLY
XRHRR
FS-ONE High Performance Intumescent Firestop SealantA water-based intumescent firestop sealant, designed to expand when exposed to heat
UL Listings for various penetrating itemsSeveral 1/4" depth systems Available in foil pack (600 ml)
One product to specify, purchase or inspect for most applicationsLow cost per penetration Quick and simple installation procedure
23 CP 601S Elastomeric Firestop SealantA single component silicone firestop sealant for joint and through penetration applications
Silicone based formula 1/4" depth systems Available in foil pack (600 ml) Meets 500 cycle requirements in joint applications (ASTM E 1966 and UL 2079)
Allows for movement and vibrationCost effective solutions Fast and easy dispensing Smoke, fume and water resistantMeets Class I W Rating requirements
24 CP 606 Flexible Firestop SealantAn acrylic based firestop sealant for joint and through penetration applications
Acrylic based formula Can be painted Available in foil pack (580 ml) Meets 500 cycle requirements (ASTM E 1966 and UL 2079)
Fast and easy clean-up with waterAllows for excellent finished appearanceFast and easy dispensing
12
Product Information
Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide
Hilti. Outperform. Outlast.
Hilti FirestopSaving Livesthrough innovationand education
Product Information
Firestop Systems Application Review Application
Met
al p
ipes
Plas
tic/g
lass
pip
es
Cab
les/
cabl
e tra
ys
Insu
late
d m
etal
pip
es
Met
al d
ucts
Mul
tiple
pen
etra
tions
Join
ts
Page Description Features Benefits
25 CP 604 Self-Leveling Firestop SealantA self-leveling, single-component, silicone-based firestop sealant for use with through-penetrations as well as construction joints in floors
1/4" depth systems Excellent elongation/ compression propertiesResistant to smoke, fumes and waterMeets 500 cycle requirements (ASTM E 1966 and UL 2079)
Smoke, fume and water resistantNo tooling required Meets Class 1 W Rating requirements
26
FirestopSystem
CFS-SP WB Firestop Joint SprayA sprayable fire-rated mastic for construction joints where higher movement is expected
Sprayable or apply by brush Paintable Quick and easy installation with the Titan 600 or 1100 Sprayers Meets 500 cycle requirements
Contains no halogens, solvents or asbestos so it is safe to use and wont harm the environmentWater based formulation so spills and over-spray clean up quickly and easily
27 CP 672 FC (Fast Cure) Firestop Joint SprayA sprayable fire-rated mastic for perimeter joints where movement and fast rain resistance is required
Sprayable or apply by brush Paintable Quick and easy installation with the Titan 600 or 1100 Sprayers Meets 500 cycle requirements
Contains no halogens, solvents or asbestos so it is safe to use and wont harm the environmentWater based formulation so spills and over-spray clean up quickly and easily
28
)LUHVWRS6\VWHP
CP 777 Speed PlugsPre-cut flute configuration for top of wall firestopping
CP 767 Speed StripsPre-cut mineral wool strips suitable for joint applications
Pre-cut Superior finish Safe to use User friendly
Leaves no gaps or voids Smooth surface provides cost effective spray coverageNo asbestos Inorganic will not mildew
29 CP 620 Fire FoamUniversal firestopping solution for common construction materials. Can also be used in conjunction with CP 648E Wrap Strip
One stop application Virtually impervious to smoke Fully cures in approximately 1 minuteNo additional materials required High yield
One solution for various applicationsEasy handling for difficult to reach applicationsExcellent mold resistance Meets Class I W Rating requirements
30 CP 637 Firestop MortarA dry powder, when mixed with water forms a pourable, trowelable firestop mortar. Can also be used in conjunction with CP 648E Wrap Strip
Some applications require minimum 2-1/2" depthCleans up with water
Economical and simple to useFast and easy clean-up
13
Product Information
Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide
Hilti. Outperform. Outlast.
IntroductionA
pplications/Products
Selector Guide
Through-Penetration
JointEstim
ating Tables/Tech Data
Hilti FirestopSaving Livesthrough innovationand education
Product Information
Firestop Systems Application Review Application
Met
al p
ipes
Plas
tic/g
lass
pip
es
Cab
les/
cabl
e tra
ys
Insu
late
d m
etal
pip
es
Met
al d
ucts
Mul
tiple
pen
etra
tions
Join
ts
Page Description Features Benefits
31 FS 657 Fire BlockAn innovative and simple to install firestop block designed to expand when exposed to heat
Soft flexible design Easy to cut and shape User friendly UL systems One-sided wall systems availableNon-curing
Easy to install, reuse and repenetrateSimply trim block to fit around penetrating itemsReduces need for extra labor, tools and partsEasiest solution for large openings with multiple penetrations
32 CP 675T Firestop Board with AccessoriesReady to use Firestop Board designed for large openings with cable trays and multiple penetrations
Lightweight design Variety of tested systems Systems for one-sided installation
Easy to install; can be cut without power toolsSolutions for low and high penetrated openingsSolutions for access impeded areas
33 CP 617, CP 617 L and CP 617 XL Firestop Putty PadA moldable putty sheet designed to help protect electrical outlet boxes
Pad sizes 6" x 7", 7" x 7" or 9" x 9" 1 and 2 hour systems Tested for wood and steel studs
Fits most common electrical boxes (refer to UL listings)Only one pad to stock and installCan be used for commercial and residential applications
34 CP 618 Firestop Putty StickA moldable putty which remains pliable over time
Non-curing No volatile solvents Flexible, moldable product
Reusable and easily repenetratedApproved for combustible penetrations (cables) along with conduit, EMT and steel pipe
35 CP 658T Firestop PlugA pre-sized, intumescent firestop plug for blank openings and cable penetrations
Soft Flexible Design Versatile in use Non-curing
Fast and cost effective installationProvides temporary or permanent fire protection
Reusable
36 CP 643N Firestop CollarA ready-to-use firestop device designed to collapse plastic pipe penetrations when exposed to fire conditions
Ready-to-use out of package Adjustable mounting tabs Low profile design
Simple and quick installation Flexibility in positioning of collarAllows for correct installation in tight areas
14
Product Information
Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide
Hilti. Outperform. Outlast.
Hilti FirestopSaving Livesthrough innovationand education
Firestop Systems Application Review Application
Met
al p
ipes
Plas
tic/g
lass
pip
es
Cab
les/
cabl
e tra
ys
Insu
late
d m
etal
pip
es
Met
al d
ucts
Mul
tiple
pen
etra
tions
Join
ts
Page Description Features Benefits
37 CP 644 Firestop CollarA ready-to-use firestop device designed to collapse plastic pipe penetrations when exposed to fire conditions
Ready-to-use out of package Adjustable mounting tabs
Simple and quick installation Flexibility in positioning of collarAllows for correct installation in tight areas
38 CP 648S Firestop Wrap StripAn intumescent, flexible firestop wrap for plastic pipe penetrations
Pre-measured no cutting requiredIntegrated fastening tape No special tools required
Easy installation User friendly Saves time and labor costs
39 CP 648E Firestop Wrap StripAn intumescent, flexible firestop wrap for plastic and insulated pipe penetrations
May be continuously wrappedFlexible Versatile
No need to measure each layer for multi-wrap applications Easy to use May be used inside the annular space or outside of the substrate
40 CP 506 Smoke and Acoustic SealantFlexible sealant for joints and through-penetration openings in non fire-rated acoustical assemblies and smoke partitions (Not for use in fire-rated applications)
Fast and easy dispensing Low shrinkage after curing Excellent sound and air barrier characteristicsPaintable
Reduced labor and less operator fatigueQuality finished product appearance limits re-workLimits sound transmission and restricts smoke migration
41 CP 572 Smoke and Acoustic SprayFlexible spray for construction joint openings in non fire-rated acoustical assemblies and smoke partitions (Not for use in fire-rated applications)
Quick and easy spray applicationCan be applied at low temperaturesHigh elasticity product Excellent sprayability and low slump characteristicsPaintable
Saves time and reduces re-workReduces down-time due to cold weatherGood movement capabilities Cleaner, faster installation versus most competitive sprays
15
Product Information
Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide
Hilti. Outperform. Outlast.
IntroductionA
pplications/Products
Selector Guide
Through-Penetration
JointEstim
ating Tables/Tech Data
Hilti FirestopSaving Livesthrough innovationand education
CP 653 Speed Sleeve
Product descriptionRe-penetrable cable management device for electrical and telecom professionals
Product featuresFast installation Easy penetration and re-penetration Low L-ratings Withstands the rigors of usage and time Can be installed in wall and floor applications
Areas of applicationCable and cable bundles
For use withConcrete floor rated up to 3 hours Gypsum walls rated up to 2 hours
ExamplesElectrical wiring Premise wiring Low voltage and datacom
FIRESTOP DEVICEFOR USE IN THROUGH-PENETRATION
FIRESTOP SYSTEMSSEE UL FIRE RESISTANCE DIRECTORY
5N76
FM$33529('
)RU3HQHWUDWLRQ)LUH6WRSV&RQVXOWWKH)DFWRU\0XWXDO5HVHDUFK&RUSRUDWLRQ$SSURYDO*XLGH
R
FILL, VOID OR CAVITY MATERIALS CLASSIFIED BY
UNDERWRITERS LABORATORIES, INC.FOR USE IN TROUGH-PENETRATION
FIRESTOP SYSTEMS SEE UL FIRE RESISTANCE DIRECTORY
66Y7
NoticeAlways refer to the MSDS before use and the UL Fire Resistance Directory or Hilti Firestop Systems Guide for complete installation information.
Instructions for use1. Use either a 2.5" or 4.5" hole saw to create the
appropriate hole. 2. Insert the sleeve. 3. Seal the gap with firestop sealant to impede smoke
and gas migration. Repeat on other side of the wall
4. Spin the flange clockwise onto the device. Repeat on other side of the wall.
5. To open the device: (a) On one side of the wall, press the clip closures
inward. (b) Twist the device counterclockwise and pull the
red housing outwards to eliminate the bunching of the smoke seal fabric. A yellow label will be visible to indicate that the device is open.
6. To close the device: (a) On the same side of the wall, press the clip
closures inward. (b) Twist the device clockwise until finger-tight,
allowing it to engage with a click. For repenetration of cables, repeat steps 5 and 6. For installation options not presented here, consult your local Hilti representative for other rated firestop systems.
Installation instructions for CP 653
1 2 3 4 5 6
Technical Data CP 653 2" (50 mm) 4" (102 mm)
OD (device only) 2.3" (60 mm) 4.3" (110 mm)OD (flange) 4.7" (120 mm) 6.7" (170 mm)
ID 1.7" (48 mm) 3.6" (92 mm)Total length 12.4" (315 mm) 12.4" (315 mm)
Weight (device and flanges) 1.5 lbs 2.6 lbs
Temperature resistance 22 F to 212 F (-6 C to 100 C)
Intumescent activation Approx. 320 F (160 C)
Expansion ratio (unrestricted) 1:40
Metal Steel with zinc coating
Plastic ABS
Fabric Glass-fiber
Approvals California State Fire Marshal - No. 4485-1200:138 City of New York - MEA 413-07-M
Tested in accordance with UL 1479 ASTM E 814
16
Product Information
Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide
Hilti. Outperform. Outlast.
Hilti FirestopSaving Livesthrough innovationand education
FM$33529('
)RU3HQHWUDWLRQ)LUH6WRSV&RQVXOWWKH)DFWRU\0XWXDO5HVHDUFK&RUSRUDWLRQ$SSURYDO*XLGH
R
FILL, VOID OR CAVITY MATERIALS CLASSIFIED BY
UNDERWRITERS LABORATORIES, INC.FOR USE IN TROUGH-PENETRATION
FIRESTOP SYSTEMS SEE UL FIRE RESISTANCE DIRECTORY
66Y7
FIRESTOP DEVICE FOR USE IN THROUGH-PENETRATION
FIRESTOP SYSTEMSSEE UL FIRE RESISTANCE DIRECTORY
5N76
CP 680-P and CP 680-M Cast-In Firestop Devices
For use inDust and fiber free environments such as hospitals, computer centers and laboratoriesConcrete floor assemblies rated up to 4 hours
Product descriptionA one-step cast-in firestop device for a variety of pipe materials and diametersHelps reduce labor costs and increase productivity Ready-to-use out of the package Internationally tested and approved by UL and FM Reduces the chance of project delays due to failed inspections
Product featuresQuick and simple installation SpeedLine Alignment system promotes faster layout QuickTurn System creates fast, simple vertical connections Integrated moisture and smoke seal Innovative adapter for metal deck applications
Installation and applicationsConcrete floors from 2.5" (63 mm) thickness for either flat concrete or concrete over metal deck
CP 680-M: - Insulated and non-insulated metal pipes - EMT and electrical conduits - Cable bundles - Multiple pipes CP 680-P: Addresses all applications for CP 680-M as well as the following: - Plastic pipes such as PVC, CPVC, ABS, ENT and FRPP - Fresh and waste water pipes
Not suited forAreas with high condensation Outdoor areas Wall applications
Technical Data CP 680-P and CP 680-MID Footprint Opening required thru metal deck2" 3-3/4" x 4-1/2" 3-1/2" diameter3" 4-3/4" x 5-5/8" 4-1/2" diameter4" 6-3/8" x 6-3/4" 5-1/2" diameter6" 9" x 9-1/2" 7-1/4" diameterExpansion temperature 392F (200C)Expansion rate 1:50 (unrestrained)
1:30 (Load expansion, Load = 20g/cm3)
Standard height 8"Temperature resistance Maximum 212F (100C)Color CP 680-P: red
CP 680-M: blackApprovals California State Fire Marshal - No. 4485-1200:135, 4485-1200:136 City of New York - MEA 1-07-M, MEA 2-07-MTested in accordance with UL 1479 ASTM E 814
Internationally tested and approved
CP 680-P in concrete over wood forms
CP 680-M in concrete over wood forms
CP 680-P over metal deck
CP 680-M over metal deck
Notice Before handling, read Material Safety Data Sheet
and product label for safe usage and health information.
Instructions below are general guidelines always refer to the applicable drawing in the UL Fire Resistance Directory or Hilti Firestop Systems Guide for complete installation information
Instructions for use Before pouring concrete, secure the cover cap in
place, thereby preventing the flow of concrete into the cast-in device
Do not use for wall applications
Concrete floor with metal decking For concrete floor with metal decking applications use the correct size CP 680 Metal Deck Adapter for installed cast-in device and follow the illustrations.
Concrete floor
Installation optionFollow the illustrations if CP 680 has to be cut to slab thickness before installation, or when riser clamps are used.
Installation instructions
1 2
1 2
3 4
5 6
1 2
3 4
17
Product Information
Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide
Hilti. Outperform. Outlast.
IntroductionA
pplications/Products
Selector Guide
Through-Penetration
JointEstim
ating Tables/Tech Data
Hilti FirestopSaving Livesthrough innovationand education
Height Extension
Product descriptionFor use when concrete slabs are greater than 8" thick Device may add up to 6" with each extension kit QuickTurn Connection system promotes a fast, positive connection to the top of the appropriate cast-in deviceRed (CP 680-P) and Black (CP 680-M) versions create for easier identification when both combustible and non-combustible penetrants are employed for the same project
ColorCP 680-P Kit Red cylinder with Red coupling band CP 680-M Kit Black cylinder with Red coupling band
Installation InstructionsNotice Before handling, read Material Safety Data Sheet and product label for safe usage
and health information. Instructions below are general guidelines always refer to the applicable drawing
in the UL Fire Resistance Directory or Hilti Firestop Systems Guide for complete installation information
Metal Deck Adapters
Product descriptionFor use with concrete over metal deck applications 6" cylinder extension protrudes through even the thickest spray fireproofingQuickTurn Connection system promotes a fast, positive connection to the underside of the appropriate cast-in deviceRed (CP 680-P) and Black (CP 680-M) versions create for easier identification when both combustible and non-combustible penetrants are employed for the same projectOpening required to place the cylinder through a metal deck
For 2" Devices 3-1/2" diameter For 3" Devices 4-1/2" diameter For 4" Devices 5-1/2" diameter For 6" Devices 7-1/4" diameter
ColorCP 680-P Kit Red cylinder with two (2) metal plates CP 680-M Kit Black cylinder with two (2) metal plates
Installation instructionsNotice Before handling, read Material Safety Data Sheet and product label for safe usage
and health information. Instructions below are general guidelines always refer to the applicable drawing
in the UL Fire Resistance Directory or Hilti Firestop Systems Guide for complete installation information
18
Product Information
Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide
Hilti. Outperform. Outlast.
Hilti FirestopSaving Livesthrough innovationand education
(Pending)
Water Barrier Module
Product descriptionA pre-installed water barrier solution that impedes water Meets W-Rating requirements for select penetrants For use where a single penetrant is employed per cast-in device QuickTurn Connection system promotes a fast, positive connection to the top of the appropriate cast-in device
DimensionAdds 1" to all cast-in devices Pipe sizes addressed (See UL Systems)
For 2" Water Module: 2" Pipe For 3" Water Module: 2.5" and 3" Pipe For 4" Water Module: 4" Pipe For 6" Water Module: 6" Pipe
ColorRed housing with black gasket
Installation instructionsNotice Before handling, read Material Safety Data Sheet and product label for safe usage
and health information. Instructions below are general guidelines always refer to the applicable drawing
in the UL Fire Resistance Directory or Hilti Firestop Systems Guide for complete installation information
Top Seal Plug
Product descriptionA post-installed water barrier solution that impedes water Meets W-Rating requirements for select penetrants For use where a single penetrant is employed per cast-in device Chemically stable elastomeric material will not react with combustible pipes
ApplicationsFor single penetrants placed through a 2" cast-in place device Iron Pipe Sizing (IPS) and Copper Pipe Sizing (CPS) offerings availableFor pipes ranging from nominal 0.5" to 2.0" in diameter
ColorRed
Installation instructionsNotice Before handling, read Material Safety Data Sheet and product label for safe usage
and health information. Instructions below are general guidelines always refer to the applicable drawing
in the UL Fire Resistance Directory or Hilti Firestop Systems Guide for complete installation information
19
Product Information
Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide
Hilti. Outperform. Outlast.
IntroductionA
pplications/Products
Selector Guide
Through-Penetration
JointEstim
ating Tables/Tech Data
Hilti FirestopSaving Livesthrough innovationand education
CP 681 Tub Box Kit
The Hilti cast-in solutions include an innovative tub box solution
Structurally stable during concrete pouring Assembles easily with solvent cement no additional tools requiredTriangular shape makes working around rebar easy 3 fastening points instead of 4 reduces installation time Pre-cut to customers height requirement upon request helps reduce labor costsOne system for all pipe materials, easy to choose and inspect Accepts a pass through 1-12" pipe (with a sealing bushing) or a standard 2" P-trap (direct connection to the coupling)
The CP 681 Tub Box Kit includes an Elastomeric Sealing Bushing
Sealing bushings available for standard schedule 40 pipe or thin wall pipingVersatile CP 681 tub box kit allows sealing bushing to be installed from top or bottom
FIRESTOP DEVICE FOR USE IN THROUGH-PENETRATION
FIRESTOP SYSTEMSSEE UL FIRE RESISTANCE DIRECTORY
5N76
Technical Data CP 681Dimensions (LxWxH) 10-3/4" x 13" x slab thicknessApplication dimension Creates a 2-1/2" deep recess in the
slabMinimum slab thickness 4-1/2"Intumescent activation Approx. 375F (190C)Expansion ratio (unrestricted) 1:10Temperature resistance Maximum 212F (100C)Color Red with white PVC legs and
couplingStorage Store in dry locationApprovalsCalifornia State Fire Marshall - No. 4485-1200:122 City of New York - MEA 283-06-ETested in accordance with UL 1479 ASTM E 814
Assembly and installation instructions for CP 681 Tub Box KitNotice Before handling, read Material Safety Data Sheet
and product label for safe usage and health information.
Instructions below are general guidelines always refer to the applicable drawing in the UL Fire Resistance Directory or Hilti Firestop Systems Guide for complete installation information
Instructions for use1. Concrete on wood form secure the coupling
sleeve flange (the larger of the three flanges) to the floor deck using nails or screws.
2. Using standard solvent cement on both plastic surfaces, assemble the CP 681 Tub Box legs and sleeve to bottom of the Tub Box as follows:
Cement the two 3/4" PVC stabilizing legs to the matching connecting area on the bottom side of the CP 681 Tub Box
Cement the CP 681 Tub Box and larger PVC plastic sleeve to the connecting area on the bottom side of the CP 681 Tub Box
Secure the smaller leg flanges to the deck using nails or screws
3. Pour concrete to the proper height. CP 681 Tub Box assembly is precut to the slab thickness.
4. After concrete is cured, remove the floor deck and foam insert. Remove pressure test cap before installing drain piping.
5. Install the tub drain/overflow assembly piping (plastic or brass) through the CP 681 Tub Box and plastic coupling. Insert proper elastomeric bushing into the bottom or top of the CP 681 Tub Box assembly around the drain pipe.
Note: Install bushing before final drain/overflow assembly if installing from the top side. Complete the installation by installing branch and trap piping.
1 2 3 4 5
20
Product Information
Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide
Hilti. Outperform. Outlast.
Hilti FirestopSaving Livesthrough innovationand education
Closet Stub
Product descriptionA coupling device designed to address cast-in applications for toilet fixturesMaterial can be solvent welded to PVC piping Available for 3" and 4" PVC applications
Product dimensions (diameter x height)3": 5-11/16" x* 3-1/8" 4": 6-3/4" x* 3-5/8"
Application dimensions 3": 3-1/2" inner diameter (for use with 3" PVC pipe) 4": 4-1/2" inner diameter (for use with 4" PVC pipe)
Minimum slab thickness 6"
ColorRed
Notice Before handling, read Material Safety Data Sheet
and product label for safe usage and health information.
Instructions below are general guidelines always refer to the applicable drawing in the UL Fire Resistance Directory or Hilti Firestop Systems Guide for complete installation information
Hilti Firestop Closet Stub assembly concrete on wood form for floors A: Hilti Cast-In Firestop Closet Stub B: 3" or 4" PVC SCH 40 pipe (supplied by others) C*: 3" or 4" Toilet Flange (supplied by others)
Instructions for use1. Secure the Hilti Cast-In Firestop Closet Stub to the
floor deck, using nails or screws. Pre-assemble A and B by solvent welding.
2. Close the top of the assembly to avoid concrete filling (tape or similar).
3. Pour concrete to proper height. After concrete is cured, remove the floor deck and tape.
4. Complete installation by installing toilet flange and elbow by solvent welding.
Installation instructions
1 2 3 4
21
Product Information
Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide
Hilti. Outperform. Outlast.
IntroductionA
pplications/Products
Selector Guide
Through-Penetration
JointEstim
ating Tables/Tech Data
Hilti FirestopSaving Livesthrough innovationand education
Shower and Floor Drain
Product descriptionAn economical solution to address shower and floor drain applications The same trusted firestop material as the tub box Two variations: (1) extended sleeve and (2) hub coupling Designed to accommodate solvent welding to 2" PVC pipes
Product dimensionsExtended Sleeve: 5-3/4" base diameter 8" height Hub Coupling: 5-3/4" base diameter; 2-13/16" height
Application dimensionsExtended Sleeve: 2-3/8" inner diameter (for use with 2" PVC pipe) Hub Coupling: 2-3/8" inner diameter (for use with 2" PVC pipe)
Minimum slab thickness 4-1/2"
ColorExtended Sleeve: red flange with white extended sleeve Hub Coupling: red flange with white hub coupling
Aerator Adapters
Product description When used in conjunction with the appropriate cast-in place device, creates an underside void for the installation of a single stack waste pipe aerator system
Product features Up to a 4-1/2" recess created in the slab to reduce final ceiling height Allows for vertical, horizontal and angle movement to simplify plumbing installationsExcellent sound insulation
For use withSoil and Aerator assemblies
Technical Data Aerator-AdapterProduct dimensions (LxWxH) 3": 6" x 6-7/8" x 3"
4": 6" x 8-3/4" x 4-1/2" Void created 3": 5-3/4" x 2-3/8" (DxH)
4": 5-7/8" x 7.5" x 4-1/2" (LxWxH) Minimum slab thickness 3": 5" 4": 6-1/2" Color RedStorage Store in dry locationTested in accordance with UL 1479 ASTM E 814
Notice Before handling, read Material Safety Data Sheet and
product label for safe usage and health information. Instructions below are general guidelines always
refer to the applicable drawing in the UL Fire Resistance Directory or Hilti Firestop Systems Guide for complete installation information
Note: Before purchasing aerator adapters for your project, please confirm the following: aerators may be employed on the project as per
local codes and construction allowances minimum concrete floor slab thickness
Instructions for use1. Secure the assembly to the floor deck using nails or
screws.2. Attach the Aerator Adapter to the appropriate cast-in
place device.3. Before pouring concrete, confirm that the cover
cap of the assembly is properly secured. This will prevent flowing concrete into the CP 680-P/M during the concrete pour.
4. Complete installation by installing 3" or 4" cast iron aerator and pipe.
Installation instructions for Aerator Adapter
1 2 3 4
22
Product Information
Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide
Hilti. Outperform. Outlast.
VRGIPHYL-GMILZKULXK1|R:(
==DZ|SLHXX]H
LNLUGZLORLMWI|[YEYEYKLUHLY
XRHRR
WONHA5WFY
FS-ONE High Performance Intumescent Firestop Sealant
Product descriptionIntumescent (expands when exposed to fire) firestop sealant that helps protect combustible and non-combustible penetrations for up to 4 hours fire rating
Product featuresSmoke, gas and water resistant after material has cured Contains no halogen, solvents or asbestos High fire rating properties Water based, easy to clean Protects most typical firestop penetration applications Paintable Single component systems available Meets LEED requirements for indoor environmental quality credit 4.1 Low Emitting Materials, Sealants and Adhesives and 4.2 Paints and Coatings
Areas of applicationSteel, copper and EMT pipes Insulated steel and copper pipes Cable bundles Closed or vented plastic pipes HVAC penetrations
For use withConcrete, masonry, drywall and wood floor assemblies Wall and floor assemblies rated up to 4 hours
ExamplesSealing around combustible pipe penetrations in fire rated constructionSealing around non-combustible penetrations in fire rated construction FILL, VOID OR CAVITY MATERIAL FOR USE IN THROUGH-PENETRATION
FIRESTOP SYSTEMSSEE UL FIRE RESISTANCE DIRECTORY
66Y7
FM$33529('
)RU3HQHWUDWLRQ)LUH6WRSV&RQVXOWWKH)DFWRU\0XWXDO5HVHDUFK&RUSRUDWLRQ$SSURYDO*XLGH
R
FILL, VOID OR CAVITY MATERIALS CLASSIFIED BY
UNDERWRITERS LABORATORIES, INC.FOR USE IN TROUGH-PENETRATION
FIRESTOP SYSTEMS SEE UL FIRE RESISTANCE DIRECTORY
66Y7
Notice Before handling, read Material Safety Data Sheet
and product label for safe usage and health information.
Instructions below are general guidelines always refer to the applicable drawing in the UL Fire Resistance Directory or Hilti Firestop Systems Guide for complete installation information
Opening 1. Clean the opening. Surfaces to which FS-ONE will
be applied should be cleaned of loose debris, dirt, oil, moisture, frost and wax. Structures supporting penetrating items must be installed in compliance with local building and electrical standards.
Application of firestop sealant 2. Install the prescribed backfilling material type and
depth to obtain the desired rating (if required). Leave sufficient depth for applying FS-ONE.
3. Application of firestop sealant: Apply FS-ONE to the required depth in order to obtain the desired fire rating. Make sure FS-ONE contacts all surfaces to provide maximum adhesion. For application of FS-ONE use a standard caulking gun, foil pack gun, bulk loader and bulk gun. With FS-ONE buckets, Graco type sealant pumps may be used. (Contact pump manufacturer for proper selection).
4. Smoothing of firestop sealant: To complete the seal, tool immediately to give a smooth appearance. Excess sealant, prior to curing, can be cleaned away from adjacent surfaces and tools with water.
5. Leave completed seal undisturbed for 48 hours. 6. For maintenance reasons, a penetration seal could
be permanently marked with an identification plate. In such a case, mark the identification plate and fasten it in a visible position next to the seal.
Not for use High movement expansion joints
Underwater
On materials where oil, plasticizers or solvents may bleed i.e. impregnated wood, oil based seals, green or partially vulcanized rubber
In any penetration other than those specifically described in this manual or the test reports
Storage Store only in the original packaging in a location
protected from moisture at temperatures between 40F (5C) and 86F (30C)
Observe expiration date on the packag
Installation instructions for FS-ONE
FirestopSystem
FirestopSystem
FirestopSystem
CA
BLE
PIP
E
Technical Data* FS-ONEChemical basis Water-based intumescent acrylic
dispersionColor RedApplication temperature 40F to 104F (5C to 40C) Skin forming time Approx. 20-30 min.Curing time Approx. 2 mm / 3 daysMovement capability Approx. 5%Expansion rate (unrestricted) Up to 3-5 times original volumeTemperature resistance (cured) 40F to 212F (40C to 100C)Surface burning characteristics (ASTM E 84-96)
Flame Spread: 0 Smoke Development: 5
Sound transmission classification (ASTM E 90-99)
56 (Relates to specific construction)
Approvals California State Fire Marshal - No. 4485-1200:108 City of New York - MEA 326-96-M Vol. IVTested in accordance with UL 1479 ASTM E 814 ASTM E 84
*At 73F (23C) and 50% relative humidity
1. Clean opening. 2. Pack mineral wool. (If required)
3. Apply FS-ONE. 4. Smooth FS-ONE.
5. Leave completed seal undisturbed for 48 hours.
6. Fasten identification plate (if required).
1. Clean opening. 2. Pack mineral wool. (If required)
3. Apply FS-ONE. 4. Smooth FS-ONE.
5. Leave completed seal undisturbed for 48 hours.
6. Fasten identification plate (if required).
23
Product Information
Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide
Hilti. Outperform. Outlast.
IntroductionA
pplications/Products
Selector Guide
Through-Penetration
JointEstim
ating Tables/Tech Data
CP 601S Elastomeric Firestop Sealant
Product descriptionA silicone based firestop sealant that provides maximum movement in fire-rated joints and seals through-penetration applications
Product featuresHalogen and solvent free Asbestos free Simple to use and apply Good adhesion without use of a primer Smoke, fume, water and UV resistant Excellent movement capability, meets 500 cycle requirements (ASTM E 1966 and UL 2079)Meets Class I W-rating requirements Meets LEED requirements for indoor environmental quality credit 4.1 Low Emitting Materials, Sealants and Adhesives and 4.2 Paints and Coatings
Areas of applicationSealing construction/expansion joints Top-of-wall joints Metal pipes Cable bundles HVAC penetrations
For use withVarious base materials such as masonry, concrete, metal, glass, etc. Wall and floor assemblies rated up to 4 hours
ExamplesWhere a gypsum wall assembly meets the underside of a metal or concrete deckSealing expansion joints to impede the passage of fire, smoke and toxic fumesSealing around HVAC penetrations through fire-rated assemblies
Technical Data* CP 601SChemical basis Neutral elastic siliconeDensity Approx. 1.25 g/cm3
Color RedApplication temperature 40F to 104F (5C to 40C)Skin-forming time Approx. 15 min.Curing time Approx. 2 mm / 3 daysVolume shrinkage Approx. 0 5%Movement capability Approx. 25%Temperature resistance 40F to 320F (40C to 160C)Surface burning characteristics (ASTM E84-96)
Flame spread: 0Smoke development: 30
Sound transmission classification (ASTM E 90-97)
50 (Relates to specific construction)
Approvals California State Fire Marshal - No. 1451-1200:115
No. 1452-1200:113 No. 4485-1200:123
City of New York - MEA 101-99-M, Vol. IVTested in accordance with UL 2079 ASTM E 814 ASTM E 1966 ASTM C 920 UL 1479 ASTM E 84
*At 73F (23C) and 50% relative humidity
FILL, VOID OR CAVITY MATERIAL FOR USE IN THROUGH-PENETRATION
FIRESTOP SYSTEMS AND JOINT SYSTEMS
SEE UL FIRE RESISTANCE DIRECTORY 66Y7
FM$33529('
)RU3HQHWUDWLRQ)LUH6WRSV&RQVXOWWKH)DFWRU\0XWXDO5HVHDUFK&RUSRUDWLRQ$SSURYDO*XLGH
R
FILL, VOID OR CAVITY MATERIALS CLASSIFIED BY
UNDERWRITERS LABORATORIES, INC.FOR USE IN TROUGH-PENETRATION
FIRESTOP SYSTEMS SEE UL FIRE RESISTANCE DIRECTORY
66Y7
Notice Before handling, read Material Safety Data Sheet and
product label for safe usage and health information. Instructions below are general guidelines always
refer to the applicable drawing in the UL Fire Resistance Directory or Hilti Firestop Systems Guide for complete installation information
Opening 1. Clean the opening. Surfaces to which CP 601S will
be applied should be cleaned of loose debris, dirt, oil, wax and grease. The surface should be moisture and frost free.
Application of firestop 2. Insert fill of mineral wool (or backer as required).3. Apply firestop over backer.4. Smooth firestop sealant with a trowel before the skin
forms. Once cured, CP 601S can only be removed mechanically.
5. For maintenance reasons, a penetration seal can be permanently marked with an identification plate and fastened in a visible position next to the seal.
Chemical resistance At room temperature the cured silicone sealant is
resistant for a short time to diluted (15%) acids and lyes/alkalis as well as most commercially available
cleaning agents and disinfectants (except those containing iodine)
Concentrated acids and lyes/alkalis destroy silicone rubber over time.
Solvents and mineral oils cause cured silicone to swell. Consequently, proper functioning of the sealant should be checked after exposure to a solvent or mineral oil. Please contact your local sales representative or the nearest Hilti center if special requirements for chemical resistance have to be met.
Not for use In areas immersed in water
Not to be painted
Storage Store only in the original packaging in a location
protected from moisture at a temperature of 40F to 77F (5C to 25C)
Observe expiration date on package
Installation instructions for CP 601S
1. Clean opening 2. Insert backing material
3. Apply CP 601S 4. Smooth CP 601S 5. Fasten identification plate (if required)
FirestopSystem
FirestopSystem
FirestopSystem
JO
INT
DU
CT
1. Clean opening 2. Insert backing material
3. Apply CP 601S 4. Smooth CP 601S 5. Fasten identification plate (if required)
24
Product Information
Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide
Hilti. Outperform. Outlast.
Hilti FirestopSaving Livesthrough innovationand education
CP 606 Flexible Firestop Sealant
Product descriptionAn acrylic based firestop sealant that provides movement capability in fire rated joints and seals through-penetrations applications
Product featuresSilicone free Halogen, asbestos and solvent free Paintable Meets 500 cycle requirements (ASTM E 1966 and UL 2079) Smoke and fume resistant Easy clean up with water Single component systems available Meets LEED requirements for indoor environmental quality credit 4.1 Low Emitting Materials, Sealants and Adhesives and 4.2 Paints and Coatings
Areas of applicationSealing construction/expansion joints Top-of-wall joints Metal pipes Cable bundles HVAC penetrations
For use withVarious base materials such as masonry, concrete, gypsum, etc. Wall and floor assemblies rated up to 3 hours
ExamplesWhere a gypsum wall assembly meets the underside of a metal or concrete deckSealing expansion joints to impede the passage of fire, smoke and toxic fumesSealing around HVAC penetrations through fire-rated assemblies
FM$33529('
)RU3HQHWUDWLRQ)LUH6WRSV&RQVXOWWKH)DFWRU\0XWXDO5HVHDUFK&RUSRUDWLRQ$SSURYDO*XLGH
R
FILL, VOID OR CAVITY MATERIALS CLASSIFIED BY
UNDERWRITERS LABORATORIES, INC.FOR USE IN TROUGH-PENETRATION
FIRESTOP SYSTEMS SEE UL FIRE RESISTANCE DIRECTORY
66Y7
Notice Before handling, read Material Safety Data Sheet and
product label for safe usage and health information. Instructions below are general guidelines always
refer to the applicable drawing in the UL Fire Resistance Directory or Hilti Firestop Systems Guide for complete installation information
Opening1. Clean the opening. Surfaces to which CP 606 will
be applied should be cleaned of loose debris, dirt, oil, wax and grease. The surface should be moisture and frost free.
Application of firestop2. Insert fill of mineral wool or backer (as required).3. Apply firestop over backer.4. Smooth firestop sealant with a trowel before the skin
forms. Once cured, CP 606 can only be removed mechanically.
5. For maintenance reasons, a penetration seal can be
permanently marked with an identification plate and fastened in a visible position next to the seal.
Not for use On areas immersed in water
Storage Store only in the original packaging in a location
protected from moisture at a temperature of 40F to 77F (5C to 25C)
Observe expiration date on package
Installation instructions for CP 606
1. Clean opening 2. Insert backing material compressed per UL System
3. Apply CP 606 4. Smooth CP 606 5. Fasten identification plate (if required)
1. Clean opening 2. Insert backing material
3. Apply CP 606 4. Smooth CP 606 5. Fasten identification plate (if required)
FirestopSystem
FirestopSystem
JO
INT
DU
CT
FILL, VOID OR CAVITY MATERIAL FOR USE IN THROUGH-PENETRATION
FIRESTOP SYSTEMS AND JOINT SYSTEMS
SEE UL FIRE RESISTANCE DIRECTORY 66Y7
Technical Data* CP 606Chemical basis Acrylic based firestop sealantColor Available in red, white and grayApplication temperature 40F to 104F (5C to 40C)Skin-forming time Approx. 15 minCuring time Approx. 3 mm / 3 daysVolume shrinkage Less than 20%Movement capability Approx. 10%Temperature resistance 22F to 176F (30C to 80C)Surface burning characteristics (ASTM E 84-96)
Flame Spread: 10 Smoke Development: 0
Sound transmission classification (ASTM E 90-99)
56 (Relates to specific construction)
Approvals California State Fire Marshal - No. 1452-1200:112
No. 1451-1200:121 No. 4485-1200:132
City of New York - MEA 100-99-MTested in accordance with UL 2079 ASTM E 814 ASTM E 1966 ASTM E 84 UL 1479
*At 73F (23C) and 50% relative humidity
25
Product Information
Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide
Hilti. Outperform. Outlast.
IntroductionA
pplications/Products
Selector Guide
Through-Penetration
JointEstim
ating Tables/Tech Data
Hilti FirestopSaving Livesthrough innovationand education
Notice Before handling, read Material Safety Data Sheet and
product label for safe usage and health information. Instructions below are general guidelines always
refer to the applicable drawing in the UL Fire Resistance Directory or Hilti Firestop Systems Guide for complete installation information
Opening 1. Clean the opening. Surfaces to which CP 604 will be
applied should be cleaned of loose debris, dirt, oil, wax and grease. The surface should be moisture and frost free.
Application of firestop 2. Insert fill of mineral wool (or backer as required).3. Apply firestop over backer.4. Allow firestop sealant to level. Once cured, CP 604
can only be removed mechanically.5. For maintenance reasons, a penetration seal could
be permanently marked with an identification plate. In such a case, mark the identification plate and fasten it in a visible position next to the seal.
Chemical resistance At room temperature the cured silicone sealant is
resistant for a short time to diluted (15%) acids and lyes/alkalis as well as commercially available cleaning agents and disinfectants (except those containing iodine).
Concentrated acids and lyes/alkalis destroy silicone rubber over time.
Solvents and mineral oils cause cured silicone to swell. Consequently, proper functioning of the sealant should be checked after exposure to a solvent or mineral oil. Please contact your local sales representative or the nearest Hilti Center if special requirements for chemical resistance have to be met.
Not for use In areas immersed in water
Not to be painted
Storage Store only in the original packaging in a location
protected from moisture at a temperature of 40F (5C) to 77F (25C)
Observe expiration date on package
CP 604 Self-Leveling Firestop Sealant
Product descriptionSelf-leveling, single-component, silicone-based firestop sealant for use with through-penetrations as well as construction joints in floors.
Product featuresSelf-levelingrequires no tooling Excellent elongation/compression properties Meets 500 cycle requirements (ASTM E 1966 and UL 2079) Smoke, fumes and water resistant Meets Class I W-rating requirements Meets LEED requirements for indoor environmental quality credit 4.1 Low Emitting Materials, Sealants and Adhesives and 4.2 Paints and Coatings
Areas of applicationSealing construction/expansion joints Metal pipes Cable bundles Sealing multiple penetrations in small or large openings
For use withConcrete floors rated up to 3 hours
ExamplesPenetrations for metal pipes between floor levels Construction joints and expansion joints in floors
FILL, VOID OR CAVITY MATERIAL FOR USE IN THROUGH-PENETRATION
FIRESTOP SYSTEMS, JOINT SYSTEMS AND PERIMETER FIRE CONTAINMENT SYSTEMS
SEE UL FIRE RESISTANCE DIRECTORY 66Y7
FM$33529('
)RU3HQHWUDWLRQ)LUH6WRSV&RQVXOWWKH)DFWRU\0XWXDO5HVHDUFK&RUSRUDWLRQ$SSURYDO*XLGH
R
FILL, VOID OR CAVITY MATERIALS CLASSIFIED BY
UNDERWRITERS LABORATORIES, INC.FOR USE IN TROUGH-PENETRATION
FIRESTOP SYSTEMS SEE UL FIRE RESISTANCE DIRECTORY
66Y7
Installation instructions for CP 604
1. Clean opening 2. Insert backing material compressed per UL System
3. Apply CP 604 4. Self levels no tooling required
5. Fasten identification plate (if required)
1. Clean opening 2. Insert backing material 3. Apply CP 604 4. Self levels no tooling required
5. Fasten identification plate (if required)
FirestopSystem
FLO
OR
JO
INT
FLO
OR
Joint installation: For floor applications. Not to be used in walls.
Through Penetration Installation (Top View): For floor applications. Not to be used in walls.
Technical Data* CP 604Chemical basis Neutral elastic siliconeColor GrayApplication temperature 40F to 104F (5C to 40C)Skin forming time Approx. 15 minCuring time Approx. 2 mm/3 daysJoint movement capability Approx. 20%Temperature resistance 40F to 248F (40C to 120C)Surface burning characteristics (ASTM E 84-00)
Flame Spread: 5 Smoke Development: 60
Sound transmission classification (ASTM E 90-02)
56 (Relates to specific construction)
Approvals California State Fire Marshal - No. 4485-1200:117
No. 1452-1200:134 City of New York - MEA 237-02-MTested in accordance with UL 1479 ASTM E 1966 UL 2079 ASTM E 814 ASTM E 2307 ASTM E 84
*At 73F (23C) and 50% relative humidity
26
Product Information
Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide
Hilti. Outperform. Outlast.
)LUHVWRS6\VWHP
Firestop Joint Spray CFS-SP WB
Product descriptionA sprayable fire-rated mastic for construction joints where maximum movement is required
Product featuresSprayable or apply by brush Maximum flexibility, meets 500 cycle requirements (Class II and III Approval) (ASTM E 1966 and UL 2079) Quick and easy installation with the Titan 600 or 1100 Sprayers can help save you time and moneyContains no halogens, solvents or asbestos Water based formulation so spills and over-spray clean up quickly and easilyPaintable Meets LEED requirements for indoor environmental quality credit 4.1 Low Emitting Materials, Sealants and Adhesives and 4.2 Paints and Coatings
Areas of applicationTop-of-wall joints Curtain wall/edge of slab Expansion joints
For use withConcrete, masonry and gypsum wall assemblies Wall and floor/wall assemblies rated up to 4 hours
ExamplesWhere a gypsum wall assembly meets the underside of a metal or concrete deckWhere a concrete floor assembly meets with non-rated exterior wall (concrete, glass, etc.)Where two concrete floor/wall assemblies meet
Technical Data* CFS-SP WBDensity Approx. 10.8 lb/gal (1.3 g/cm3)Color Available in red, white and gray**Application temperature 39F to 104F (4C to 40C)Temperature resistance -40F to 176F (-40C to 80C)Consistency Sprayable liquidChemical basis Acrylic-water-based-dispersionCuring time Approx. 24 hours @ 73F,
50% humidity for 1/8" depthPh-value Approx. 8-9Movement capability Up to 50%Surface burning characteristics (CAN/ULC-S102)
Flame spread: 15 Smoke development: 10
Sound transmission classification (ASTM E 90-99)
59(per tested construction type)
Approvals California State Fire Marshal - In progressTested in accordance with UL 2079 ASTM E 1966 ASTM E 84 CAN/ULC-S102 UL 1479 ASTM E 814 ASTM E 2307 CAN/ULC-S115
*At 73F (23C) and 50% relative humidity**Gray color requires six (6) weeks lead time
Installation instructions for Firestop Joint Spray CFS-SP WB
FirestopSystem
FILL, VOID OR CAVITY MATERIAL FOR USE IN THROUGH-PENETRATION FIRESTOP SYSTEMS, AND/OR JOINT
SYSTEMS, AND/OR PERIMETER FIRE CONTAINMENT SYSTEMS
SEE UL FIRE RESISTANCE DIRECTORY 66Y7
FM$33529('
)RU3HQHWUDWLRQ)LUH6WRSV&RQVXOWWKH)DFWRU\0XWXDO5HVHDUFK&RUSRUDWLRQ$SSURYDO*XLGH
R
FILL, VOID OR CAVITY MATERIALS CLASSIFIED BY
UNDERWRITERS LABORATORIES, INC.FOR USE IN TROUGH-PENETRATION
FIRESTOP SYSTEMS SEE UL FIRE RESISTANCE DIRECTORY
66Y7
Notice Before handling, read Material Safety Data Sheet and
product label for safe usage and health information. Instructions below are general guidelines always
refer to the applicable drawing in the UL Fire Resistance Directory or Hilti Firestop Systems Guide for complete installation information
Opening1. Clean the opening. Surfaces to which Firestop Joint
Spray will be applied should be cleaned of loose debris, dirt, oil, wax and grease. The surface should be moisture and frost free.
Application of Firestop Joint Spray2. Mineral wool packing: Install the prescribed back
filling material type and depth to obtain desired rating.
3. Application of Firestop Joint Spray: Apply Firestop Joint Spray to the required depth in order to obtain the desired rating. Make sure Firestop Joint Spray contacts all surfaces and overlaps beyond all surrounding surfaces (Refer to UL System). Titan Sprayers have been successful