P R O S T H E T I C S& O R T H O T I C S
F O U R T H E D I T I O N
N O R T H & S O U T H A M E R I C A
ST&G USA Corporation
With continuing commitment to excellence, we
will devote our resources to new technologies to
continue providing high quality products and service.
ST&G Corporation, located in southern California,
has been serving the medical community within
the prosthetic and orthotic and the rehabilitation
industry for over 11 years. We have always been
committed to our vision of providing excellent
service to meet the needs of our customers. ST&G
Corporation is an ISO 9001:2000 certified company
in which our quality standard for product and services
comply with international standards.
I N N O V A T I O N W I T H O U T L I M I T S
P R O S T H E T I C S
C O N T E N T S
O R T H O T I C S
I. KNEE & HIP JOINT Knee Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Hip Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
II. HIGH ACTIVITY SPORT PRODUCTS High Activity Sport Products . . . . . . . . . . . . . . . . 30
III. PEDIATRIC SYSTEMS Pediatric Knee Joints . . . . . . . . . . . . . . . . . . . . . 38 Pediatric Components . . . . . . . . . . . . . . . . . . . . . 41 Pediatric Foot . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . 42
IV. SUSPENSION SYSTEMS Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Suspension Sleeve . . . . . . . . . . . . . . . . . . . . . . . 50 Liners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
V. MODULAR COMPONENTS EZ Adapt Series . . . . . . . . . . . . . . . . . . . . . . . . . 58 Double Ended Adapters . . . . . . . . . . . . . . . . . . . 60 Double Ended Sliding Adapters . . . . . . . . . . . . . 62 Aluminum Tubes . . . . . . . . . . . . . . . . . . . . . . . . . 63 Tube Clamp Assembly . . . . . . . . . . . . . . . . . . . . 64 Tube Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Foot Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . 75
V. MODULAR COMPONENTS (cont.)
Heavy Duty Systems 375lbs System . . . . . . . . . . . . . . . . . . . . . . . . . . 77 500lbs System . . . . . . . . . . . . . . . . . . . . . . . . . . 78 BK Kits Ti, SS & Al . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Heavy Duty BK Kits . . . . . . . . . . . . . . . . . . . . . . . 80
VI. PROSTHETIC FEET Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
VII. MATERIALS & TOOLS Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
VIII. REPLACEMENT PARTS Replacement Parts . . . . . . . . . . . . . . . . . . . . . . 104
IX. TORQUE VALUES Torque Values for ST&G Products . . . . . . . . . . . 108
I. LOWER EXTREMITY ORTHOTICS Zero G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
II. SPINAL ORTHOTICS LSO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 TLSO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
II. UPPER EXTREMITY ORTHOTICS Shoulder Abduction Orthosis . . . . . . . . . . . . . . 119 Shoulder Joint . . . . . . . . . . . . . . . . . . . . . . . . . . 121
III. AFO ANKLE JOINTS Ankle Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
K N E E & H I P J O I N T
K N E E & H I P J O I N T
6 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
KNEE
JOI
NTS VGK-125
VGK PROSTHETIC KNEEControlled Swing and Stance Phase Prosthetic Knee with Proprioceptive Force Input
• Dynamic stability for standing and loading of a flexed knee• No electronics – yet performs like a MPK• Advanced stumble recovery• Flexion yield thru 90 degrees• Additional extra carrying load variance, independent of amputee weight of 15kg / 35lbs• Auto-compensated for varying shoe gear• Waterproof up to 1m / 3ft• Patient manual control of 3 functional modes: walking / lock with high resistance / cycling with stumble recovery• Multiple proximal adapters with high resistance / cycling with stumble recovery
Suggested HCPCS code(s) • L5828* + L5845* + L5925* + L5999* *Currently under review with CMS.• Visit our website at www.stngco.com for updates
P/N VGK 125PPyramid Adapter
VGK 125KDKD Adapter
VGK 125MThreaded Connector
Weight Limit 125kg / 275lbs 125kg / 275lbs 125kg / 275lbs
Build Height 282mm 282mm 282mm
Knee Center to Top 29mm 30.1mm 30.1mm
Knee Flexion 155 Degrees 155 Degrees 155 Degrees
Product Weight 1400g 1400g 1400g
Material Aluminum Aluminum Aluminum
Warranty 2 years 2 years 2 years
Pyramid Adapter KD Adapter Threaded Connector
11” from base to top
Knee Joints
BILLINGLEVEL K1 K2 K3 K4
7www.stngco.com
KNEE JOINTS
M0703DOLPHIN KNEE – HYDRAULIC SINGLE AXIS KNEE
• Hydraulic cylinder giving the ease of pre-swing performance influences the smoothness of the gait• Extremely stable knee axle position• Very light weight, slim and compact• Independent flexion and extension• Hydraulic adjustable resistance• Extension assist
PDAC approved HCPCS code(s)• L5828• To download PDAC Letter please visit our website at www.stngco.com
P/N M0703
Weight Limit 100kg / 220 lbs
Build Height 184mm
Knee Center to Top 20mm
Knee Flexion 180 Degrees
Product Weight 495g
Material Aluminum
Warranty 2 year
Knee Joints
BILLINGLEVEL K1 K2 K3 K4
K N E E & H I P J O I N T
8 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
KNEE
JOI
NTS M0780 / M0786
SWAN KNEE – HYDRAULIC STANCE FLEXION POLYCENTRIC KNEE
• Polycentric 5-bar knee design• Hydraulic flexion adjustment• Low profile knee center and build-height• Adjustable stance flexion resistance• Adjustable extension assist• Adjustable flexion resistance
PDAC approved HCPCS code(s)• L5613 + L5850• To download PDAC Letter please visit our website at www.stngco.com
P/N M0780SWAN 75
M0786SWAN 100
Weight Limit 75kg / 165lbs 125kg / 275lbs
Build Height 172mm 176mm
Knee Center to Top 10mm 7mm
Knee Flexion 150 Degrees 150 Degrees
Product Weight 670g 840g
Material Aluminum Aluminum
Warranty 2 year 2 year
SWAN 75 SWAN 100 M0780 M0786
SWAN 75 M0780
SWAN 100 M0786
Knee Joints
BILLINGLEVEL K1 K2 K3 K4
9www.stngco.com
KNEE JOINTS
1323STANCE FLEXION 5-BAR PNEUMATIC KNEE
• Pneumatic cylinder with independent flexion extension adjustment for swing phase• Can be used for either above knee or knee disarticulation• All axes have built-in bearing which allow for ultra smooth walking movement• Extensive alignment adjusting abilities for a smooth and natural gait pattern• Polycentric knee with stance flexion control for maximum safety during stance• Best suited to be used for low to high K3 level• Practitioner adjustable from extreme stability to high stance flexion• Adjustable extension assist
PDAC approved HCPCS code(s)• L5840 + L5845 + L5850 • To download PDAC Letter please visit our website at www.stngco.com
P/N 1323APPyramid Adapter
1323ALLotus Adapter
Weight Limit 125kg / 275lbs 125kg / 275lbs
Build Height 219mm 219mm
Knee Center to Top 325mm 325mm
Knee Flexion 135 Degrees 135 Degrees
Product Weight 976g 998g
Material Aluminum Aluminum
Warranty 2 years 2 years
REPLACEMENT PARTS
P/N Description
PA13 Pyramid Adapter for : L1321, 1321,1322,1323,1324 and 1326
LA13 Lotus Adapter for : L1321, 1321,1322,1323,1324 and 1326
Knee Joints
Lotus Adapter
BILLINGLEVEL K1 K2 K3 K4
K N E E & H I P J O I N T
10 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
KNEE
JOI
NTS 1324
STANCE FLEXION 5-BAR MECHANICAL KNEE
• Very stable 5-bar knee with a large stance flexion angle • Constant friction adjustment for swing phase• Can be used for either above knee or knee disarticulation• All axes have built-in bearing which allow for ultra smooth walking movement• Extensive alignment adjusting abilities for a smooth and natural gait pattern• Polycentric knee with stance flexion control for maximum safety during stance• Best suited to be used for K2 level• Practitioner adjustable from extreme stability to high stance flexion• Built-in adjustable extension assist
PDAC approved HCPCS code(s)• L5611 + L5845 + L5850• To download PDAC Letter please visit our website at www.stngco.com
P/N 1324APPyramid Adapter
1324ALLotus Adapter
Weight Limit 125kg / 275lbs 125kg / 275lbs
Build Height 160mm 160mm
Knee Center to Top 25mm 25mm
Knee Flexion 135 Degrees 135 Degrees
Product Weight 766g 766g
Material Aluminum Aluminum
Warranty 2 years 2 years
REPLACEMENT PARTS
P/N Description
PA13 Pyramid Adapter for : L1321, 1321,1322,1323,1324 and 1326
LA13 Lotus Adapter for : L1321, 1321,1322,1323,1324 and 1326
Knee Joints
Lotus Adapter
BILLINGLEVEL K1 K2 K3 K4
11www.stngco.com
KNEE JOINTS
1341SAFE STRIDE KNEE
• Geometrically aligned 4-bar knee with stance locking feature• Incorporates pneumatic swing phase control• Independent flexion / extension adjustment• Provides a high degree of safety• Frame constructed of superlight aluminum alloy• Proximal attachment has adjustable rotation
Suggested HCPCS code(s)• L5840* + L5850* (*Product Code up for Review)• Pending PDAC approval. Visit our website at www.stngco.com for updates.
P/N 1341AP
Weight Limit 100kg / 220lbs
Build Height 157.77mm
Knee Center to Top 18.92mm
Knee Flexion 150 Degrees
Product Weight 900g
Material Aluminum/Titanium
Warranty 2 years
Knee Joints
BILLINGLEVEL K1 K2 K3 K4
K N E E & H I P J O I N T
12 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
KNEE
JOI
NTS 1319
PNEUMATIC SINGLE AXIS KNEE
• Single axis knee with pneumatic swing control• Independent flexion / extension swing adjustment• Frame constructed of superlight aluminum alloy
Suggested HCPCS code(s)• L5830* + L5850* (*Product Code up for Review)• Pending PDAC approval. Visit our website at www.stngco.com for updates.
P/N 1319A
Weight Limit 100kg / 220lbs
Build Height 146.43mm
Knee Center to Top 21.43mm
Knee Flexion 150 Degrees
Product Weight 630g
Material Aluminum/Titanium
Warranty 2 years
Knee Joints
BILLINGLEVEL K1 K2 K3 K4
13www.stngco.com
KNEE JOINTS
1320PNEUMATIC SINGLE AXIS KNEE WITH WEIGHT ACTIVATED LOCK
• Single axis knee with pneumatic swing control• Weight activated stance lock• Independent flexion / extension swing adjustment• Provides a high degree of safety• Frame constructed of superlight aluminum alloy
PDAC approved HCPCS code(s)• L5822• To download PDAC Letter please visit our website at www.stngco.com
P/N 1320A
Weight Limit 100kg / 220lbs
Build Height 159.68mm
Knee Center to Top 32.79mm
Knee Flexion 150 Degrees
Product Weight 630g
Material Aluminum/Titanium
Warranty 2 years
Knee Joints
BILLINGLEVEL K1 K2 K3 K4
K N E E & H I P J O I N T
14 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
KNEE
JOI
NTS 1322
POLYCENTRIC PNEUMATIC 4-BAR KNEE
• Polycentric knee joint with pneumatic swing control• Independent flexion / extension adjustment• Built-in bearings which allow for ultra smooth walking movement• Frame construction made of superlight aluminum alloy• Proximal attachment has A-P slide and rotating adjustment• Adjustable extension assist
PDAC approved HCPCS code(s)• L5840 + L5850• To download PDAC Letter please visit our website at www.stngco.com
P/N 1322APPyramid Adapter
1322ALLotus Adapter
Weight Limit 125kg / 275lbs 125kg / 275lbs
Build Height 218mm 218mm
Knee Center to Top 24mm 24mm
Knee Flexion 135 Degrees 135 Degrees
Product Weight 875g 897g
Material Aluminum Aluminum
Warranty 2 years 2 years
REPLACEMENT PARTS
P/N Description
PA13 Pyramid Adapter for : L1321, 1321,1322,1323,1324 and 1326
LA13 Lotus Adapter for : L1321, 1321,1322,1323,1324 and 1326
Knee Joints
Lotus Adapter
BILLINGLEVEL K1 K2 K3 K4
15www.stngco.com
KNEE JOINTS
1321POLYCENTRIC 4-BAR KNEE
• Polycentric knee• Constant friction swing phase control• Frame construction is made of superlight aluminum alloy• 4-bar linkage is made of aircraft alloy (AA7075)• Proximal attachment has A-P slide and rotation adjustment• Optional Adapters: Pyramid (AK) and Lotus (KD)
PDAC approved HCPCS code(s)• L5611 + L5850• To download PDAC Letter please visit our website at www.stngco.com
P/N 1321APPyramid Adapter
1321ALLotus Adapter
Weight Limit 125kg / 275lbs 125kg / 275lbs
Build Height 160mm 160mm
Knee Center to Top 24mm 24mm
Product Weight 651g 672g
Material Aluminum Aluminum
Warranty 2 years 2 years
REPLACEMENT PARTS
P/N Description
PA13 Pyramid Adapter for : L1321, 1321,1322,1323,1324 and 1326
LA13 Lotus Adapter for : L1321, 1321,1322,1323,1324 and 1326
Knee Joints
Lotus Adapter
BILLINGLEVEL K1 K2 K3 K4
K N E E & H I P J O I N T
16 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
KNEE
JOI
NTS L1321
POLYCENTRIC 4-BAR MANUAL LOCKING KNEE
• Manual locking polycentric knee• Lanyard lock mechanism can be removed at a later time so that the knee can be used as a free swing knee• Low activity• Provides a high degree of safety• Frame construction is made of superlight aluminum alloy• 4-bar linkage is made of aircraft alloy (AA7075)• Proximal attachment has A-P slide and rotation adjustment• Optional Adapters: Pyramid (AK) and Lotus (KD)
PDAC approved HCPCS code(s)• L5850 + L5611 + L5925 • To download PDAC Letter please visit our website at www.stngco.com
P/N L1321APPyramid Adapter
L1321ALLotus Adapter
Weight Limit 125kg / 275lbs 125kg / 275lbs
Build Height 160mm 160mm
Knee Center to Top 24mm 24mm
Product Weight 651g 672g
Material Aluminum Aluminum
Warranty 2 years 2 years
REPLACEMENT PARTS
P/N Description
PA13 Pyramid Adapter for : L1321, 1321,1322,1323,1324 and 1326
LA13 Lotus Adapter for : L1321, 1321,1322,1323,1324 and 1326
LY13 Lanyard for Manual Locking Knee
Knee Joints
Lotus Adapter
BILLINGLEVEL K1 K2 K3 K4
17www.stngco.com
KNEE JOINTS
13264-BAR KNEE FOR AK AND KD
• Polycentric 4-bar knee• Constant friction swing phase control• Best suited for low activity level• Provides a high degree of safety• Frame construction is made of superlight aluminum alloy• Proximal attachment has A-P slide and rotation adjustment• Optional Adapters: Pyramid (AK) and Lotus (KD)
PDAC approved HCPCS code(s)• L5611 + L5850• To download PDAC Letter please visit our website at www.stngco.com
P/N 1326APPyramid Adapter
1326ALLotus Adapter
Weight Limit 100kg / 220lbs 100kg / 220lbs
Build Height 160mm 160mm
Knee Center to Top 24mm 24.1mm
Product Weight 532g 553g
Material Aluminum Aluminum
Warranty 2 years 2 years
Lotus Adapter REPLACEMENT PARTS
P/N Description
PA13 Pyramid Adapter for : L1321, 1321,1322,1323,1324 and 1326
LA13 Lotus Adapter for : L1321, 1321,1322,1323,1324 and 1326
Knee Joints
BILLINGLEVEL K1 K2 K3 K4
K N E E & H I P J O I N T
18 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
KNEE
JOI
NTS 1311
WEIGHT ACTIVATED BRAKE KNEE
• Single axis knee• Stance phase friction brake• Activated by weight bearing and designed for moderate functional demands• Also suitable for amputees with lower functional levels who desire to avoid using a manual locking knee
PDAC approved HCPCS code(s)• L5812 + L5850• To download PDAC Letter please visit our website at www.stngco.com
P/N 1311T 1311S
Weight Limit 125kg / 275lbs 125kg / 275lbs
Build Height 42.44mm 42.44mm
Knee Center to Top 25.9mm 25.9mm
Knee Flexion 150 Degrees 150 Degrees
Product Weight 362g 532g
Material Titanium Stainless Steel
Warranty 1 year 1 year
REPLACEMENT PARTS
P/N Description
1311-1 Extension Assist Kit and Cable for P/N 1311
Knee Joints
BILLINGLEVEL K1 K2 K3 K4
19www.stngco.com
KNEE JOINTS
1313AMANUAL LOCKING KNEE – TYPE A
• Designed for amputees with very low functional level• Light weight manual locking knee
PDAC approved HCPCS code(s)• L5811 • To download PDAC Letter please visit our website at www.stngco.com
P/N 1313A
Weight Limit 90kg / 198lbs
Build Height 39.43mm
Knee Center to Top 17.93mm
Knee Flexion 140 Degrees
Product Weight 298g
Material Aluminum
Warranty 1 year
REPLACEMENT PARTS
P/N Description
LY13 Lanyard for Manual Locking Knee
Knee Joints
BILLINGLEVEL K1 K2 K3 K4
K N E E & H I P J O I N T
20 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
KNEE
JOI
NTS 1313A-N
MANUAL LOCKING KNEE / TYPE B
• Single axis light weight manual locking knee• Designed for beginner and elderly with low activity level• Fully machined 7075 airplane aluminum alloy
PDAC approved HCPCS code(s)• L5810 • To download PDAC Letter please visit our website at www.stngco.com
P/N 1313A-N
Weight Limit 100kg / 220lbs
Product Weight 281g
Material Aluminum
Warranty 2 years
Knee Joints
BILLINGLEVEL K1 K2 K3 K4
REPLACEMENT PARTS
P/N Description
LY13 Lanyard for Manual Locking Knee
21www.stngco.com
KNEE JOINTS
1312MECHANICAL 4-BAR KNEE
• Polycentric knee• Frame construction is made of titanium or stainless steel• Constant friction swing control• Adjustable extension assist• Adjustable 4-bar stability
Suggested HCPCS code(s)• L5818* + L5850* (*Product Code up for Review)• Pending PDAC approval. Visit our website at www.stngco.com for updates
P/N 1312T 1312S
Weight Limit 125kg / 275lbs 125kg / 275lbs
Build Height 75.07mm 75.07mm
Knee Center to Top 15.6mm 15.6mm
Knee Flexion 110 Degrees 110 Degrees
Product Weight 481g 719g
Material Titanium Stainless Steel
Warranty 1 year 1 year
Knee Joints
BILLINGLEVEL K1 K2 K3 K4
K N E E & H I P J O I N T
22 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
KNEE
JOI
NTS 1314
4-BAR KNEE WITH EXTENSION ASSIST FOR KD
• Suggested use for knee disarticulation• Moderate actively level• Constant friction swing phase control• Adjustable extension assist• Low profile
PDAC approved HCPCS code(s)• L5818 + L5850• To download PDAC Letter please visit our website at www.stngco.com
P/N 1314T 1314S
Weight Limit 125kg / 275lbs 125kg / 275lbs
Build Height 111.45mm 111.45mm
Knee Center to Top 11mm 11mm
Knee Flexion 110 Degrees 110 Degrees
Product Weight 671g 916g
Material Titanium Stainless Steel
Warranty 1 year 1 year
P-022
Knee Joints
BILLINGLEVEL K1 K2 K3 K4
23www.stngco.com
KNEE JOINTS
13154-BAR KNEE WITH EXTENSION ASSIST FOR KD
• Manual locking knee• Suggested use for knee disarticulation • Low actively level• Low profile
PDAC approved HCPCS code(s)• L5818 + L5925• To download PDAC Letter please visit our website at www.stngco.com
P/N 1315T 1315S
Weight Limit 125kg / 275lbs 125kg / 275lbs
Build Height 111.45mm 111.45mm
Knee Center to Top 11mm 11mm
Knee Flexion 110 Degrees 110 Degrees
Product Weight 671g 916g
Material Titanium Stainless Steel
Warranty 1 year 1 year
Knee Joints
REPLACEMENT PARTS
P/N Description
LY13 Lanyard for Manual Locking Knee
BILLINGLEVEL K1 K2 K3 K4
K N E E & H I P J O I N T
24 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
KNEE
JOI
NTS 1317
SINGLE AXIS KNEE WITH INTERNAL EXTENSION ASSIST AND ADJUSTABLE CONSTANT FRICTION
• Single axis knee joint• Constant friction swing phase control• Moderate actively level
PDAC approved HCPCS code(s)• L5811 + L5850• To download PDAC Letter please visit our website at www.stngco.com
P/N 1317T 1317S
Weight Limit 125kg / 275lbs 125kg / 275lbs
Build Height 77.32mm 77.32mm
Knee Center to Top 22.4mm 22.4mm
Knee Flexion 120 Degrees 120 Degrees
Product Weight 389g 590g
Material Titanium Stainless Steel
Warranty 1 year 1 year
Knee Joints
BILLINGLEVEL K1 K2 K3 K4
25www.stngco.com
KNEE JOINTS
1318SINGLE AXIS KNEE WITH MANUAL LOCK
• Single axis knee joint with adjustable manual lock• Lower actively level• High stance phase stability, minimal swing phase control
PDAC approved HCPCS code(s)For 1318S - Stainless Steel• L5810 + L5850• To download PDAC Letter please visit our website at www.stngco.com
For 1318T - Titanium
• L5811 + L5850
• To download PDAC Letter please visit our website at www.stngco.com
P/N 1318T 1318S
Weight Limit 125kg / 275lbs 125kg / 275lbs
Build Height 77.32mm 77.32mm
Knee Center to Top 22.4mm 22.4mm
Knee Flexion 120 Degrees 120 Degrees
Product Weight 389g 590g
Material Titanium Stainless Steel
Warranty 1 year 1 year
Knee Joints
BILLINGLEVEL K1 K2 K3 K4
REPLACEMENT PARTS
P/N Description
LY13 Lanyard for Manual Locking Knee
K N E E & H I P J O I N T
26 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
HIP
JOIN
TS 1330HIP JOINT WITH INTERNAL EXTENSION ASSIST
• Internal extension assist device which can be adjusted to patient’s needs• Joint can also be adjusted for hip flexion as well as rotation
P/N 1330T 1330S
Weight Limit 100kg / 220lbs 100kg / 220lbs
Product Weight 718g 850g
Material Titanium Stainless Steel
Warranty 1 year 1 year
Hip Joints
27www.stngco.com
HIP JOINTS
1331HIP JOINT WITH EXTERNAL EXTENSION ASSIST
• External extension assist device which can be adjusted to patient’s needs• Provides basic needs at a lower cost
P/N 1331A
Weight Limit 100kg / 220lbs
Product Weight 903g
Material Aluminum
Warranty 1 year
Hip Joints
K N E E & H I P J O I N T
28 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
HIP
JOIN
TS 1332HIP JOINT WITH 4-BAR LINKAGE
• Polycentric design provides high security• Best suited for hip disarticulation with high need of safety• Superlight aluminum alloy and 4-bar linkage a reduced prosthetic weight
P/N 1332A
Weight Limit 100kg / 220lbs
Product Weight 717g
Material Aluminum
Warranty 2 years
Hip Joints
H I G H A C T I V I T YS P O R T P R O D U C T S
30 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
HIGH
ACT
IVIT
Y SP
ORT
PROD
UCTS
H I G H A C T I V I T Y S P O R T
SPO700RUNNING KNEE JOINT
• Single axis knee joint that can easily be used by beginning runners• Unique CAM mechanism is active at flexion to prevent knee bending• Hydraulic cylinder absorbs the terminal impact• Swing phase control / extension spring, constant friction• Connection system does not need the L-shaped plate, allowing for a reduced prosthetic weight
P/N SPO700
Weight Limit 80kg / 176lbs
Build Height 141mm
Knee Center to Top 41mm
Knee Flexion 137 Degrees
Product Weight 630g
Material Aluminum
Warranty 1 year
Hydraulic Cylinders absorb terminal impact
Knee Joints
31www.stngco.com
HIGH ACTIVITY SPORT PRODUCTS
SP1100 KATANASPORT RECREATIONAL FOOT
The KATANA is an energy storing foot designed and developed for recreational sport activities. IMASEN manufacturing uses a technology that is focused around shape design using a three dimensional CAD system and finite element structural analysis as well as valuable feedback received from field tests conducted over many years.
Warranty: 1 year
P/N Katana Sport Recreational Foot
SP1100-R-4 Generation 2 wider base - Category 4 - Weight Limit 56kg/123 lbs
SP1100-R-6 Generation 2 wider base - Category 6 - Weight Limit 64kg/141 lbs
SP1100-R-7 Generation 2 wider base - Category 7 - Weight Limit 72kg/159 lbs
SP1100-R-8 Generation 2 wider base - Category 8 - Weight Limit 80kg/177 lbs
P/N Katana Sport Recreational Foot
SP1100-4 Category 4 - Weight Limit 56kg/123 lbs
SP1100-6 Category 6 - Weight Limit 64kg/141 lbs
SP1100-7 Category 7 - Weight Limit 72kg/159 lbs
SP1100-8 Category 8 - Weight Limit 80kg/177 lbs
* This category is one guide line which can be affected by activity.
Feet
SP1100-R KATANA-RSPORT RECREATIONAL FOOT
The KATANA-R is an energy storing foot designed and developed for recreational sport activities and the second generation foot of KATANA. It has a wider base for stability and increased energy return for more active users.
Warranty: 1 year
* This category is one guide line which can be affected by activity.
32 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
HIGH
ACT
IVIT
Y SP
ORT
PROD
UCTS
H I G H A C T I V I T Y S P O R T
SAMURI SERIESBK RUNNING BLADE ADAPTER COMPONENTRY
These components connect a socket and running blade (KATANA) for BK prosthesis. This unique feature is designed to enable prosthetists to adjust the alignment easily using Hex wrenches as you do for normal prostheses. The adaptor is attached on the back of the socket, so that you can put this on the user who may have clearance issues.
SP0200 Anchor A lamination lock is set at the rear of the trans tibial socket for a base for installing “SP0300 Abutment”.
SP0300 Abutment (8° . 15°) This is the abutment designed to connect to “SP0200 Anchor” in order to connect either the “SP0400 Initial Fitting Plug Connector” or “SP0401 Plug Connector.” This part can be connected with either the SP0400 or SP0401 for alignment. This comes in two initial angles of 8 and 15 degrees.
SP0400 Initial Fitting Plug Connector The plug connector is used for initial fitting. The SP0400 allows the “SP1100 Sport Recreational Foot”, to be pinched back and forth, a length of the prosthetic limb can be slid up and down for adjustment. This plus connector can be connected with the “SP0300 Abutment” for alignment.
SP0401 Plug Connector After completion of initial fitting, the SPO401 Plug Connector is replaced with the “SP0400 Initial Fitting Plug Connector” for connection to the foot.
SP1000 L-Shaped Plate (0° . 8° . 16°) The L-Shaped Plate is used for the knee disarticulation prothsis and the trans femoral prosthesis. An “M Socket Base with Screw” can be connected to the top of the plate. This comes in three initial angles of 0, 8 and 16 degrees.
Warranty: 1 year
Adapters
P/N Product Description
SP0200 Socket Lamination Anchor for TT prostheses. (Use with SP0300 & SP0400)
SP0300-8 Abutment - Pyramid connecter (Adjustment with SP0200 and SP0400)
SP0300-15 Abutment - Pyramid connecter (Adjustment with SP0200 and SP0400)
SP0400 Plug Connector for initial fitting. (Alignment and limb length are adjustable with SP0300)
SP0401 Plug Connector for final fitting. (Alignment is adjustable with SP0300)
SP1000-0 L-shape plate for TF runners to connect SP1100 and SP1100-R - The tilt angle is 0 Degrees
SP1000-8 L-shape plate for TF runners to connect SP1100 and SP1100-R - The tilt angle is 8 Degrees
SP1000-16 L-shape plate for TF runners to connect SP1100 and SP1100-R - The tilt angle is 16 Degrees
www.stngco.com 33
S A M U R A I A S S E M B L Y
Flexion & Extension Length Adjustment Internal & External Rotation
SP0200 Anchor
SP0300 Abutment
SP0400 Initial Fitting Plug Connector
SP0401 Plug Connector
SP1000 L-Shaped Plate
34 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
HIGH
ACT
IVIT
Y SP
ORT
PROD
UCTS
Spike Sole and Foot Cover
Spike sole and Foot cover are developed under the collaboration between IMASEN Engineering Corporation and Mizuno, Japanese sport product manufacturer. They are specially designed for prosthetic runners to be used for Track & Field activities.
They reduce the extra work required to mount the sole in a prefabricated running shoe. The user can easily change the soles when necessary.
① Pin Store Hole
② Boa®
Boa® systems enable users to donn and doff the foot cover easily. Also, it leads to secure setting of foot cover over the running blade.
③ The Thinness and LightnessThe thinness makes it possible to transfer the energy return directly from the running blade. The lightness is another advantage to other spike soles.
④ Dual Structure of Sole for High Cushion and Grip PerformanceEVA and rubber foot cover allows a great fit on the running blade and leads to high cushioning and gripping on different ground surfaces. The thickness is designed to match to the sound side shoe sole.
⑤ Unique Alignment of Spike PinsThe spike pin alignment is specially designed for prosthetic users. The front pin of the toe is very important for prosthetic runners.
⑥ Fabric to Glue Tightly on the Blade
Warranty: 6 month
H I G H A C T I V I T Y S P O R T
Pin store hole
Spike Sole & Foot Cover
①
②
③
④
⑤
⑥
S P I K E S O L E A N D F O O T C O V E R
36 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
HIGH
ACT
IVIT
Y SP
ORT
PROD
UCTS SP701
KNEE JOINT FOR RECREATIONAL SPORT
• The knee has a unique selective locking system at 0, 20, 40 and 60 degrees. In locking positions, the bumper absorbs impacts and the knee flexes maximum 15 degrees• The knee has a free swing mode• Uses for this knee include cross country skiing, skiing, snowboarding, table tennis and more
P/N SP701
Weight Limit 80kg / 177lbs
Build Height 146mm
Knee Center to Top 44mm
Knee Flexion Max. 100 degree in free swing mode
Product Weight 1020g
Material Aluminum
Warranty 1 year
Knee Joints
H I G H A C T I V I T Y S P O R T
INNOVATION WITHOUT LIM
ITS
37
P E D I A T R I CS Y S T E M S
38 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
PEDI
ATRI
C KN
EE J
OINT
S
P E D I A T I C S Y S T E M S
P313PEDIATRIC 4-BAR KNEE WITH MANUAL LOCKING FOR AK AND KD
• Pediatric Polycentric Locking 4-Bar Knee• Light weight• Very low functional level• Provides a high degree of safety• Optional Adapters: Pyramid (AK) and 3-prong adapter (KD)
Suggested HCPCS code(s)• L5818* + L5850* (*Product Code up for Review)• Pending PDAC approval. Visit our website at www.stngco.com for updates.
P/N P313APPyramid Adapter
P313ALKD Adapter
Weight Limit 55kg / 121lbs 55kg / 121lbs
Build Height 320g 310g
Material Aluminum Aluminum
Warranty 1 year 1 year
REPLACEMENT PARTS
P/N Description
PA31 AK Adapter for P/N P313A/P317A
KA31 KD Adapter for P/N P313A/P317A
LY13 Lanyard for Manual Locking Knee
Pediatric Knee Joints
KD Adapter
BILLINGLEVEL K1 K2 K3 K4
39www.stngco.com
PEDIATRIC KNEE JOINTS
P317PEDIATRIC 4-BAR KNEE FOR AK AND KD
• Pediatric Polycentric 4-Bar Knee• Light weight• Provides a high degree of safety• Optional Adapters: Pyramid (AK) and 3-prong adapter (KD)
Suggested HCPCS code(s)• L5611* + L5850* (*Product Code up for Review)• Pending PDAC approval. Visit our website at www.stngco.com for updates.
P/N P317APPyramid Adapter
P317ALKD Adapter
Weight Limit 55kg / 121lbs 55kg / 121lbs
Product Weight 320g 310g
Material Aluminum Aluminum
Warranty 1 year 1 year
KD Adapter
REPLACEMENT PARTS
P/N Description
PA31 AK Adapter for P/N P313A/P317A
KA31 KD Adapter for P/N P313A/P317A
Pediatric Knee Joints
BILLINGLEVEL K1 K2 K3 K4
40 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
PEDI
ATRI
C KN
EE J
OINT
S P320APEDIATRIC SINGLE AXIS KNEE
Lightweight aluminum single axis, pediatric knee with proximal adjustment pyramid and distal tube clamp.
Suggested HCPCS code(s)• L5811* (*Product Code up for Review)• Pending PDAC approval. Visit our website at www.stngco.com for updates.
P E D I A T I C S Y S T E M S
P/N P320A Pyramid Adapter
Weight Limit 45kg / 99lbs
Build Height 44mm (end of clamp to top of dome)
Overall Height 73mm
Product Weight 167g
Material Aluminum
Warranty 1 year
Pediatric Knee Joints
Overall
Height
73mm
Build
Height
44mm
BILLINGLEVEL K1 K2 K3 K4
41www.stngco.com
PEDIATRIC COMPONENTS
P220PEDIATRIC 4-EAR CONNECTOR
P/N Material Weight Limit Warranty
P220A Aluminum/Stainless Steel 55kg / 121lbs 1 year
P211PEDIATRIC TUBE CLAMP ASSEMBLY
P/N Material Weight Limit Warranty
P211A Aluminum 55kg / 121lbs 1 year
P212PEDIATRIC TUBE CLAMP
P/N Material Weight Limit Warranty
P212A Aluminum 55kg / 121lbs 1 year
P231PEDIATRIC SACH FOOT ADAPTER
P/N Material Weight Limit Warranty
P231A Aluminum/Stainless Steel 55kg / 121lbs 1 year
Pediatric Components
42 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
PEDI
ATRI
C FO
OT &
REP
LACE
MEN
T PA
RTS
P E D I A T I C S Y S T E M S
1105PEDIATRIC SACH FOOT
This foot is designed for use with a modular adapter P231A.• LCode: L5970
P/N Product Description Weight Limit
1105 1105 =12 - 17 Left / Right 35kg / 77lbs
1105 1105 =19 Left / Right 45kg / 99lbs
Note: Approximate weight and build height taken on size 19
PA31AK ADAPTER FOR PEDIATRIC KNEE
KA31KD ADAPTER FOR PEDIATRIC KNEE
P/N Description
PA31 AK Adapter for Pediatric Knee
P/N Description
KA31 KD Adapter for Pediatric Knee
Replacement Parts
Pediatric Foot
For Pediatric Sach Foot Adapter, see page 41.
S U S P E N S I O NS Y S T E M S
44 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
LOC
KS
S U S P E N S I O N S Y S T E M S
3180MMECHANICAL MAGLOCK
GO MAGNETICIntroducing the newly designed low profile, no battery mechanical MAGLOCK
The MAGLOCK eases the frustration of donning a pin lock liner for TF and TT patients K1 to K3. The MAGLOCK is developed to deliver up to 90lbs of suspension force.
The large distal target allows the patient to be 10 degrees off center and still achieve suspension. The MAGLOCK stops socket rotation and creates a new type of suspension.
The ultimate product for patients who have dexterity issues, issues with pin alignment, requires a caregiver and much more.
Warranty: 1 year
P/N ProductDescription
Weight Limit
Product Weight
Build Height
Suspension Strength
3180M MechanicalMaglock 136kg / 300lbs 278g /
0.6lbs2.2cm /0.87in 90lbs
T H E N E W & I M P R O V E D M A G L O C K 2 . 0
REPLACEMENT PARTS
P/N Description
DSTC Distal Cap Converter for all pin liners
REPLACEMENT PARTS
P/N Description
3180-1M Dummy for MECHANICAL MAGLOCK
Locks
Please visit www.stngco.com for fabrication instructions
45www.stngco.com
3190TEZ ADAPT LOCK
Ultra Low Profile Modular Lock
EZ ADAPT components allow you to fabricate a low profile socket much easier, providing modular versatility to rotate as needed without any hassle.
The 3190T EZLOCK is a Titanium adapter with a male pyramid on one end and threaded pylon on the opposite end. This titanium lock with serrated pin type attachment gives the ultimate advantage in strength and versatility when space is limited. The EZLOCK is a light space saving device which also provides the benefit of rotation. The push button can also be cut to length if needed.
The 3190T EZLOCK is designed to work in conjunction with ST&G 3 & 4-prong rotating bases 1421S, 1221S, 1223T. Please use laminating instruction for our bases.
Set screws should be torqued and thread locker applied after alignment is complete.
EZLOCK Includes 2 pin sizes (medium & large) and pin guide dummy.
Warranty: 1 year
LOCKS
P/N ProductDescription
Weight Limit
Product Weight
Build Height
3190T Low ProfileLock 136kg / 300lbs 92g 25mm
EZLOCK Dummy
Locks
Please visit www.stngco.com for fabrication instructions
REPLACEMENT PARTS
P/N Description
3140-MP Medium pin for EZ Lock 3190, Pin length 1.5in
3140-LP Long pin for EZ Lock 3190, Pin length 2in
46 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
LOC
KS
S U S P E N S I O N S Y S T E M S
3170SHIFT LOCK
Light Weight Heavy Duty Offset Shuttle Lock
• Simply shift the base in fabrication to achieve any offset• Light weight• Stainless steel lined pin shaft• Serrated pin type attachment• Can be used for laminated and thermoplastic sockets• Easily compensates for the variance between pin and socket alignment when used with the 4-hole plate• Weight Limit: 136 kg / 300 lbs
Warranty: 1 year
P/N ProductDescription
Weight Limit
Product Weight
Build Height
① 3170 Shift ShuttleLock 136kg / 300lbs 127g 39mm
② 3170P Shift ShuttleLock with Plate 136kg / 300lbs 153g 39mm
Side View
Offset View
Adapter Center Socket Center
Locks
①
②
Please visit www.stngco.com for fabrication instructions
REPLACEMENT PARTS
P/N Description
3140-MP Medium pin for Shift Lock 3170, Pin length 1.5in
47www.stngco.com
LOCKS
3160SHIFT CLUTCH LOCK
Durable Offset Clutch Lock
• Simply shift the base in fabrication to achieve any offset• Smooth gear and bearing mechanism for infinite adjustment• Used for both laminated and thermoplastic sockets• Easily compensate for the variance between pin and socket alignment when used with the 4-hole plate• Quiet operation
Warranty: 1 year
Side View
Offset View
P/N ProductDescription
Weight Limit
Product Weight
① 3160 Shift Clutch Lock 136kg / 300lbs 193g
② 3160P Shift Clutch Lock with Plate 136kg / 300lbs 219g
Locks
②
①
Please visit www.stngco.com for fabrication instructions
REPLACEMENT PARTS
P/N Description
CLP Pin for Clutch Lock 3130 / 3150 / 3160
48 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
LOC
KS
S U S P E N S I O N S Y S T E M S
3130INTEGRA CLUTCH LOCK
Infinite Adjustment Lock
• Smooth gear mechanism• All-in-one design with built-in pyramid• Quiet operation• Cost effective pricing• Ideal for laminated sockets
Warranty: 1 year
P/N Product Description Weight Limit
3130 Integra Clutch Lock 114kg / 250lbs
REPLACEMENT PARTS
P/N Description
CLP Pin for Clutch Lock 3130 / 3150 / 3160
3150THREADED CLUTCH LOCK
Infinite Adjustment Modular Lock
• Smooth gear mechanism• Built-in pyramid• Screw-in modular design provides easy maintenance when required• Cost effective pricing• Need to use with titanium or stainless steel 3-prong or 4-prong rotating base and 4-hole rotating base
Warranty: 1 year
Two types available: 3150 TF – Threaded clutch lock with titanium 4-prong rotating base3150S – Threaded clutch lock with stainless steel 3-prong rotating base
P/N Product Description Weight Limit
① 3150TF Threaded Clutch Lock 100kg / 220lbs
② 3150S Threaded Clutch Lock 100kg / 220lbs
REPLACEMENT PARTS
P/N Description
CLP Pin for Clutch Lock 3130 / 3150 / 3160
Locks
Please visit www.stngco.com for fabrication instructions
②
①
49www.stngco.com
LOCKS
Locks3140BASE SHUTTLE LOCK
Light weight and cost effective
• Versatile cylindrical body with a 4-hole attachment• Serrated pin type attachment• Deep pin well for easy insertion• Includes 2 pins• Cost effective pricing
Warranty: 1 year
P/N Product Description Weight Limit Length Warranty
3140-S Base Shuttle Lock with 2 Short Pins 136kg / 300lbs 1in 1 year
3140-M Base Shuttle Lock with 2 Medium Pins 136kg / 300lbs 1.5in 1 year
3140-L Base Shuttle Lock with 2 Long Pins 136kg / 300lbs 2in 1 year
3140-XL Base Shuttle Lock with 2 Extra Long Pins 136kg / 300lbs 2.5in 1 year
Push button can be cut to various lengths
REPLACEMENT PARTS
P/N Description
3140-1 Fabrication Dummy Kit for Shuttle Lock 3140
Please visit www.stngco.com for fabrication instructions
REPLACEMENT PARTS
P/N Description Length
3140-SP Short Pin for Base Shuttle Lock 3140 1in
3140-MP Medium Pin for Base Shuttle Lock 3140 1.5in
3140-LP Long Pin for Base Shuttle Lock 3140 2in
3140-XLP Extra Long Pin for Base Shuttle Lock 3140 2.5in
50 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
SUSP
ENSI
ON
SLEE
VE
S U S P E N S I O N S Y S T E M SSuspension Sleeve
P/N Description Circumference
3400-S Suspension Sleeve – Small Small (41): 41cm – 49cm
3400-M Suspension Sleeve – Medium Medium (49): 49cm – 55cm
3400-L Suspension Sleeve – Large Large (55): 55cm – 62cm
Outer Suspension Sleeve
Inner Suspension Sleeve
Liner
Socket
3400 ECLIPSESUSPENSION SLEEVE
The NEW Eclipse Suspension Sleeve provides extreme durability and comfort for your patient. Imagine not having to replace suspension sleeves every 3 months.
A unique combination of materials and smart design, ST&G has created a superior suspension sleeve that offers high performance and secure fit.
• Reinforced silicone and strategically located Parylene® coating provides maximum durability.
• Dual sleeve design with non-slip inner strip of surface provides a maximum airtight seal which eliminates slippage. This revolutionary patent pending design helps keep the sleeve in place even during the most strenuous activity.
• Depending on activity, the Eclipse sleeve easily slides over itself to adjust for length.
• The Parylene® coating does not inhibit knee flexion which allows for excellent performance and comfort.
• The Eclipse offers a platinum cured medical grade silicone with a Parylene® surface which reduces surface friction between the sleeve and skin helping in the prevention of skin shear for fragile skin and blister reduction.
• The smooth and silky coating allows for clothing to naturally hang and not bunch up.
Warranty: 120 day warranty against defect and workmanship.
Patent Pending
Measure circumference 15cm (6in) above mid-patella and choose the correct size.
51www.stngco.com
MAGLINERS
3030 / 3050 HYDROMAGLINERS – TRANSTIBIAL / TRANSFEMORAL
Exclusively designed for the MAGLOCK
ST&G revolutionized the liner industry with the use of Parylene® on the surface of the silicone liner. We were also the first to encapsulate the outer cloth into the liner. We have eliminated delamination. We have designed a new cloth specially for this process.
The Hydro MAGLiner’s silky smooth mineral oil embedded platinum cured medical grade silicone liner has the unique ability to repel water. This hydrophobic property makes the Hydro the easiest and fastest liner to clean and sanitize
The Parylene® surface reduces surface friction between the liner/skin and liner/socket for better comfort and donning. The Hydro MAGLiner reduces skin shear for fragile skin and will help with blister reduction. The matrix which is built into the liner prevents distal elongation and delamination.
The Hydro Skin offers proprietary donning and doffing strips to aid the patient in easier application/removal. It is suitable for moderate to high activity patients who require cushioning over sensitive areas in the socket. The Hydro Skin liner’s opaque pigment gives a natural “skin tone” to all ethnic skin types.
Warranty: 6 month
P/N Description P/N Description
3030-18 MAGLiner Hydro, 18 3030-28 MAGLiner Hydro, 28
3030-20 MAGLiner Hydro, 20 3030-30 MAGLiner Hydro, 30
3030-22 MAGLiner Hydro, 22 3030-32 MAGLiner Hydro, 32
3030-23.5 MAGLiner Hydro, 23.5 3030-34 MAGLiner Hydro, 34
3030-25 MAGLiner Hydro, 25 3030-36 MAGLiner Hydro, 36
3030-26.5 MAGLiner Hydro, 26.5
P/N Description P/N Description
3050-30 MAGLiner Hydro, 30 3050-38 MAGLiner Hydro, 38
3050-32 MAGLiner Hydro, 32 3050-40 MAGLiner Hydro, 40
3050-34 MAGLiner Hydro, 34 3050-45 MAGLiner Hydro, 45
3050-36 MAGLiner Hydro, 36
MAGLiners
Transtibial
Transfemoral
MAGLiners, PREMIER & HYDRO are designed exclusively for the MAGLOCK Suspension System. The MAGLOCK eases the frustration of donning a pin lock liner for patients K1 to K3. The MAGLOCK is developed using a rare earth magnet which achieves up to 90lbs of adhesion. The large distal target allows the patient to be 10 degrees off center and still get suspension.
52 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
MAG
LINE
RS
S U S P E N S I O N S Y S T E M S
3040 / 3060 PREMIERMAGLINERS – TRANSTIBIAL / TRANSFEMORAL
PREMIER – Exclusively designed for the MAGLOCK
This premium liner is designed for the health of the residual limb and ease of donning. Manufactured with mineral oil embedded platinum cured medical grade silicone and sheathed in a seamless durable fabric. The matrix which is built into the liner prevents distal elongation.
Warranty: 6 month
P/N Description P/N Description
3040-18 MAGLiner Premier, 18 3040-28 MAGLiner Premier, 28
3040-20 MAGLiner Premier, 20 3040-30 MAGLiner Premier, 30
3040-22 MAGLiner Premier, 22 3040-32 MAGLiner Premier, 32
3040-23.5 MAGLiner Premier, 23.5 3040-34 MAGLiner Premier, 34
3040-25 MAGLiner Premier, 25 3040-36 MAGLiner Premier, 36
3040-26.5 MAGLiner Premier, 26.5
P/N Description P/N Description
3060-30 MAGLiner Premier, 30 3060-38 MAGLiner Premier, 38
3060-32 MAGLiner Premier, 32 3060-40 MAGLiner Premier, 40
3060-34 MAGLiner Premier, 34 3060-45 MAGLiner Premier, 45
3060-36 MAGLiner Premier, 36
MAGLiners
Transtibial
Transfemoral
MAGLiners, PREMIER & HYDRO are designed exclusively for the MAGLOCK Suspension System. The MAGLOCK eases the frustration of donning a pin lock liner for patients K1 to K3. The MAGLOCK is developed using a rare earth magnet which achieves up to 90lbs of adhesion. The large distal tar-get allows the patient to be 10 degrees off center and still get suspension.
* Using the MAGLINER with the MAGLOCK offers the lowest profile possible.
53www.stngco.com
LINERS
3010 / 3090 FORTE TRANSTIBIAL / TRANSFEMORAL
Locking & Cushion
The Forte liner is a silicone gel liner with mineral oil embedded in the silicone providing additional healing factor to the skin. The liner is made of medical grade silicone and durable seamless fabric on the outside for easy donning and doffing application. The liner comes with cushion and locking options. It is suitable for low to moderate activity patients. The matrix which is built into the liner prevents distal elongation of the liner for locking application.
Warranty: 6 month
P/N Description
3010L-18 Forte Locking Liner, 18
3010L-20 Forte Locking Liner, 20
3010L-22 Forte Locking Liner, 22
3010L-23.5 Forte Locking Liner, 23.5
3010L-25 Forte Locking Liner, 25
3010L-26.5 Forte Locking Liner, 26.5
3010L-28 Forte Locking Liner, 28
3010L-30 Forte Locking Liner, 30
3010L-32 Forte Locking Liner, 32
3010L-34 Forte Locking Liner, 34
3010L-36 Forte Locking Liner, 36
P/N Description
3010C-18 Forte Cushion Liner, 18
3010C-20 Forte Cushion Liner, 20
3010C-22 Forte Cushion Liner, 22
3010C-23.5 Forte Cushion Liner, 23.5
3010C-25 Forte Cushion Liner, 25
3010C-26.5 Forte Cushion Liner, 26.5
3010C-28 Forte Cushion Liner, 28
3010C-30 Forte Cushion Liner, 30
3010C-32 Forte Cushion Liner, 32
3010C-34 Forte Cushion Liner, 34
3010C-36 Forte Cushion Liner, 36
P/N Description
3090L-30 Forte Locking TF Liner, 30
3090L-32 Forte Locking TF Liner, 32
3090L-34 Forte Locking TF Liner, 34
3090L-36 Forte Locking TF Liner, 36
3090L-38 Forte Locking TF Liner, 38
3090L-40 Forte Locking TF Liner, 40
3090L-45 Forte Locking TF Liner, 45
Liners
Transtibial Locking Transtibial Cushion
Transfemoral
54 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
LINE
RS
S U S P E N S I O N S Y S T E M S
3020 / 3070 PARASIL TRANSTIBIAL / TRANSFEMORAL
Parasil Liner offers a superior durable design for your active patient and is available in both PIN LOCKING and CUSHION.
The silky smooth Parasil Liner is designed for high performance with minimal maintenance. Made with platinum cured medical grade mineral oil embedded silicone with a Parylene® coating gives the Parasil the unique ability to repel water and lower the co-efficiency of friction. This hydrophobic property is easy to clean and sanitize leaving it odor free.
The Parylene® surface reduces surface friction between the liner/skin and liner/socket which will help in the prevention of skin shear for fragile skin and blister reduction. The Parasil offers proprietary donning and doffing strips to aid the patient in easier application/removal. It is suitable for moderate to high activity patients who require cushioning over sensitive areas in the socket. The Parasil liner’s opaque pigment gives a natural “skin tone” to all ethnic skin types.
Warranty: 6 month
Liners
P/N Description P/N Description
3020L-18 Parasil Locking Liner, 18 3020C-18 Parasil Cushion Liner, 18
3020L-20 Parasil Locking Liner, 20 3020C-20 Parasil Cushion Liner, 20
3020L-22 Parasil Locking Liner, 22 3020C-22 Parasil Cushion Liner, 22
3020L-23.5 Parasil Locking Liner, 23.5 3020C-23.5 Parasil Cushion Liner, 23.5
3020L-25 Parasil Locking Liner, 25 3020C-25 Parasil Cushion Liner, 25
3020L-26.5 Parasil Locking Liner, 26.5 3020C-26.5 Parasil Cushion Liner, 26.5
3020L-28 Parasil Locking Liner, 28 3020C-28 Parasil Cushion Liner, 28
3020L-30 Parasil Locking Liner, 30 3020C-30 Parasil Cushion Liner, 30
3020L-32 Parasil Locking Liner, 32 3020C-32 Parasil Cushion Liner, 32
3020L-34 Parasil Locking Liner, 34 3020C-34 Parasil Cushion Liner, 34
3020L-36 Parasil Locking Liner, 36 3020C-36 Parasil Cushion Liner, 36
P/N Description P/N Description
3070L-30 Parasil Locking TF Liner, 30 3070C-30 Parasil Cushion TF Liner, 30
3070L-32 Parasil Locking TF Liner, 32 3070C-32 Parasil Cushion TF Liner, 32
3070L-34 Parasil Locking TF Liner, 34 3070C-34 Parasil Cushion TF Liner, 34
3070L-36 Parasil Locking TF Liner, 36 3070C-36 Parasil Cushion TF Liner, 36
3070L-38 Parasil Locking TF Liner, 38 3070C-38 Parasil Cushion TF Liner, 38
3070L-40 Parasil Locking TF Liner, 40 3070C-40 Parasil Cushion TF Liner, 40
3070L-45 Parasil Locking TF Liner, 45 3070C-45 Parasil Cushion TF Liner, 45
Transtibial
TransfemoralBlister Reduction Comparison – Silicone vs. Parasil Silicone
Sili
cone
Par
asil
Sili
cone
55www.stngco.com
LINERS
Transtibial Liner
Step 1 Measure the circumference of the residual limb at 4cm from the distal end.
Step 2 Choose the liner size which corresponds to the measurement or one smaller.
Step 3 Never choose a liner size which is larger than the measurement.
Transfemoral Liner
Step 1 Measure the circumference of the residual limb at 4cm from the distal end.
Step 2 Choose the liner size which corresponds to the measurement or one smaller.
Step 3 Never choose a liner size which is larger than the measurement.
HOW TO MEASURE
FORTE
4cm
4cm
FORTE
PARASIL
PARASIL
CUSHION
CUSHION
MAGLINER
MAGLINER
BK LINERS – Wall Averages
AK LINERS – Wall Averages
56 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
VALV
ES
S U S P E N S I O N S Y S T E M S
3201 XP VALVE
ST&G XP Valve is designed for vacuum suspension systems. It creates negative pressure inside the socket. This valve is positioned in a housing that seals securely against the inner surface of the hard socket near the distal end. The valve expulses the air under positive pressure when donning a socket. During removal of the prostheses, the socket seal needs to be released via doffing of the suspension sleeve and seal to allow air back into the hard socket. The XP Valve is an auto-expulsion and easy to install package. This is recommended for transtibial amputation and requires normal socket fabrication.
Features:
• Lightweight design • Low build height • Easy and quick fabrication • Easy cleaning
Warranty: 1 year
3202 XP AK VALVE
The XP AK Valve is an expulsion valve that is equipped with a push button suction release. It is easy to install and recommended for transfemoral users. The core of the valve can be unscrewed from the housing, which allows for easier donning and doffing of the socket and for use of pull-socks with atmospheric suction suspension.
Features:
• Simple installation • Low build height • For any activity level • Durable
Warranty: 1 year
Valves
P/N Description
3201 XP Valve
P/N Description
3202 XP AK Valve
M O D U L A RC O M P O N E N T S
58 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
EZ A
DAPT
SER
IES
M O D U L A R C O M P O N E N T S
1702T, 1703T, 1704T, 1705T, 1725TEZ ADAPT SERIES
EZ ADAPT components provide versatility to shift and/or rotate as needed, bringing easy solutions to prosthetic alignment needs without adding significant weight or modifying the prosthetic socket.
Warranty: 2 year
P/N Description Weight Limit
① 1702T Rotating Receiver, 45mm, Ti 136kg / 300lbs
② 1703T Rotating Receiver, 60mm, Ti 136kg / 300lbs
③ 1704T Offset Rotating Receiver, Ti 136kg / 300lbs
④ 1705T Rotating Receiver Clamp, Ti 136kg / 300lbs
⑤ 1725T Offset Rotating Pyramid, Ti 136kg / 300lbs
EZ Adapt Series
①
②
③
④
⑤
59www.stngco.com
EZ ADAPT SERIES
1737T, 1727T, 1717T, 1718T, 1751TEZ ADAPT SERIESWarranty: 2 year
P/N Description Weight Limit
① 1737T Extreme linear offset 4-hole pyramid (provides up to 20mm of offset) 100kg / 220lbs
② 1727T Diagonal offset 4-hole pyramid (provides up to 12mm of offset) 100kg / 220lbs
③ 1717T Linear offset 4-hole pyramid (provides up to 7mm of offset) 100kg / 220lbs
④ 1718T Sliding 4-hole receiver(12mm maximum slide distance) 100kg / 220lbs
⑤ 1751T Variable Height Double Ended Adapter (height adjustment range is 12.7mm maximum or 1/2 in) 100kg / 220lbs
EZ Adapt Series
①
②
③
④
⑤
60 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
DOUB
LE E
NDED
ADA
PTER
S
Double Ended Adapters
M O D U L A R C O M P O N E N T S
1201,1202,1203,1204DOUBLE ENDED ADAPTER
With pyramid receivers on both ends, these titanium/stainless steel adapters provide excellent adjustability options when clearance is limited. They are available in 32mm, 45mm, 60mm and 75mm height.
Warranty: 2 year
① Double Ended Adapter with Pyramid, 32mm② Double Ended Adapter with Pyramid, 45mm③ Double Ended Adapter with Pyramid, 60mm④ Double Ended Adapter with Pyramid, 75mm
P/N Material Height Product Weight
Weight Limit
① 1201T Titanium 32mm 88g 136kg / 300lbs
② 1202T Titanium 45mm 99g 136kg / 300lbs
③ 1203T Titanium 60mm 113g 136kg / 300lbs
④ 1204T Titanium 75mm 126g 136kg / 300lbs
① 1201S Stainless Steel 32mm 150g 125kg / 275lbs
② 1202S Stainless Steel 45mm 166g 125kg / 275lbs
③ 1203S Stainless Steel 60mm 192g 125kg / 275lbs
④ 1204S Stainless Steel 75mm 210g 125kg / 275lbs
1205TUBE WITH PYRAMID RECEIVER
The tube adapter provides optimum strength and options for low clearance requirements.
Warranty: 2 year
P/N Material Height Product Weight
Weight Limit
1205T Titanium 100mm 128g 136kg / 300lbs
①
②
③
④
61www.stngco.com
DOUBLE ENDED ADAPTERS
Double Ended Adapters1261,1262,1263,1264DOUBLE ENDED ADAPTER WITH PYRAMID
With pyramid and pyramid receiver on both ends, these titanium/stainless steel adapters provide excellent adjustability options when clearance is limited. They are available in 32mm, 45mm, 60mm and 75mm height.
Warranty: 2 year
① Double Ended Adapter with Pyramid, 32mm ② Double Ended Adapter with Pyramid, 45mm ③ Double Ended Adapter with Pyramid, 60mm ④ Double Ended Adapter with Pyramid, 75mm
P/N Material Height Product Weight
Weight Limit
① 1261T Titanium 32mm 75g 125kg / 275lbs
② 1262T Titanium 45mm 86g 125kg / 275lbs
③ 1263T Titanium 60mm 99g 125kg / 275lbs
④ 1264T Titanium 75mm 111g 125kg / 275lbs
① 1261S Stainless Steel 32mm 121g 125kg / 275lbs
② 1262S Stainless Steel 45mm 146g 125kg / 275lbs
③ 1263S Stainless Steel 60mm 166g 125kg / 275lbs
④ 1264S Stainless Steel 75mm 188g 125kg / 275lbs
①
②
③
④
62 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
DOUB
LE E
NDED
SLI
DING
ADA
PTER
S
M O D U L A R C O M P O N E N T SDouble Ended Sliding Adapter
1229DOUBLE ENDED SLIDING ADAPTER
The Double Ended Sliding Adapter permits additional sliding adjustment of up to 13mm between the prosthetic socket and pyramid adapter, even as the prosthesis is being worn. The sliding adjustment allows for fine tuning in any desired parallel position of the distal portion, independent of the angle of adjustment through the pyramid.
Warranty: 2 year
P/N Material Height Product Weight
Weight Limit
1229T Titanium 60mm 55g 125kg / 275lbs
1229S Stainless Steel 60mm 100g 125kg / 275lbs
1228DOUBLE ENDED SLIDING ADAPTER WITH PYRAMID
The Double Ended Sliding Adapter with Pyramid permits additional sliding adjustment of up to 13mm between the prosthetic socket and pyramid adapter, even as the prosthesis is being worn. The sliding adjustment allows for fine tuning in any desired parallel position of the distal portion, independent of the angle of adjustment through the pyramid.
Warranty: 2 year
P/N Material Height Product Weight
Weight Limit
1228T Titanium 60mm 48g 125kg / 275lbs
1228S Stainless Steel 60mm 83g 125kg / 275lbs
63www.stngco.com
ALUMINUM
TUBES
1209,1210ALUMINUM TUBE
① Aluminum 385mm TubeThe 1209A Aluminum Tube has a diameter of 30mm and length of 385mm. It is extruded and shot peened for an optimum strength. It can be cut to length for use.
Warranty: 2 year
② Aluminum 910mm TubeThe 1210A Aluminum Tube has a diameter of 30mm and length of 910mm. It is extruded and shot peened for an optimum strength. It can be cut to length for use.
Warranty:2 year
P/N Material Length Product Weight
Weight Limit
① 1209A Aluminum 385mm 227g 136kg / 300lbs
② 1210A Aluminum 910mm 538g 114kg / 250lbs
Aluminum Tubes
①
②
64 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
TUBE
CLA
MP
ASSE
MBL
Y
M O D U L A R C O M P O N E N T S
1211TUBE CLAMP ASSEMBLY
① Titanium Tube Clamp Assembly
The titanium fixed adapter with 30mm aluminum tube has a permanent adapter at one end. It can be cut to length. The titanium adapter is forged and machined while the aluminum tube is extruded and shot peened for an optimum fatigue strength. This combination creates high quality, durable and strong component. Warranty: 2 year
② Stainless Steel Tube Clamp Assembly
The stainless fixed adapter with 30mm aluminum tube has a permanent adapter at one end. It can be cut to length. The stainless steel adapter is made of high strength stainless steel alloy while the aluminum tube is extruded and shot peened for an optimum fatigue strength. This combination creates high quality, durable and strong component. Warranty: 2 year ③ AluminumTube Clamp Assembly
The aluminum fixed adapter with 30mm aluminum tube has a permanent adapter at one end. It can be cut to length. The aluminum adapter is forged and machined while the aluminum tube is extruded and shot peened for an optimum fatigue strength.This combination creates high quality, durable and strong component. Warranty: 2 year ④ Molded Stainless Steel Tube Clamp Assembly
The molded stainless steel fixed adapter with 30mm aluminum tube comes in two length 200mm and 400mm. Warranty: 1 year ⑤ Aluminum Tube Clamp Assembly - One Piece
The aluminum fixed adapter with 30mm aluminum tube has a permanent adapter at one end. It can be cut to length. This one piece tube clamp assembly design makes this adapter great for aligning a prosthesis where space is limited. The aluminum adapter and tube combination is 3D forged and machined for optimum fatigue strength. This combination creates high quality and durable product while maintaining the light weight. Warranty: 2 year
①
②
③
④
⑤
P/N Material Product Weight Weight Limit
① 1211T Titanium 306g 136kg / 300lbs
② 1211S Stainless Steel 344g 114kg / 250lbs
③ 1211A Aluminum 307g 114kg / 250lbs
④ 1211MS-2001211MS-400
Molded SSMolded SS
201g320g
90kg / 198lbs 90kg / 198lbs
⑥ 1211A-OP Aluminum 280g 114kg / 250lbs
Tube Clamp Assembly
65www.stngco.com
TUBE CLAMP ASSEM
BLY
Tube Clamp Assembly1241TUBE CLAMP ASSEMBLY
Titanium Low Profile Tube Clamp Assembly
The low profile titanium fixed adapter with 30mm aluminum tube has a permanent adapter at one end. It can be cut to length. The titanium adapter is forged and machined while the aluminum tube with 223mm is extruded and shot peened for an optimum fatigue strength. This combination creates high quality, durable and strong component.
Warranty: 2 year
P/N Material Product Weight Weight Limit
1241T Titanium 232g 136kg / 300lbs
66 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
TUBE
CLA
MPS
M O D U L A R C O M P O N E N T S
1212TUBE CLAMP
① Titanium Tube Clamp
The titanium 30mm tube clamp adapter is designed for an optimum strength while maintaining low weight. A forged and machined combination provides high quality and strong product.
Warranty: 2 year
② Stainless Steel Tube Clamp
The stainless steel 30mm tube clamp adapter is made of high strength stainless steel alloys providing a strong and durable component.
Warranty: 2 year
③ Aluminum Tube Clamp
The aluminum 30mm tube clamp adapter is made of high strength aluminum alloys. This tube clamp is manufactured by a forged and machined combination providing for high quality and strong product.
Warranty: 2 year
④ Molded Stainless Steel Econo Tube Clamp
The molded stainless steel 30mm econo tube clamp adapter is designed for cost effective application.
Warranty: 1 year
1222OFFSET TUBE CLAMP
The titanium 30mm 1222 tube clamp offers 5mm of offset when extra alignment is needed. It is also ideal when using a pin suspen-sion lock, where prosthetic and pin alignment can be easily adjusted using the offset clamp. This versatile clamp design also provides an offset position that can be rotated 360 degrees.
Warranty: 2 year
①
②
③
④
P/N Material Product Weight Weight Limit
① 1212T Titanium 79g 136kg / 300lbs
② 1212S Stainless Steel 128g 125kg / 275lbs
③ 1212A Aluminum 83g 114kg / 250lbs
④ 1212MS Molded SS 117g 90kg / 198lbs
P/N Material Product Weight Weight Limit
1222T Titanium 98g 136kg / 300lbs
Tube Clamps
67www.stngco.com
TUBE CLAMPS
121310º ANGLED TUBE CLAMP
The 10º titanium 30mm angled adapter is used often with hip disar-ticulation system. The 10º angle tilt helps at times with alignment asso-ciated with hip disarticulation system and as well as transfemoral and transtibial alignment situation.
Warranty: 2 year
1219SLIDING TUBE CLAMP
The titanium 30mm sliding tube clamp adapter permits additional sliding adjustment between the prosthetic socket and tube adapter, even as the prosthesis is being worn. The sliding adjustment allows for fine tuning in any desired parallel position of the distal portion, independent of the angle of adjustment through the pyramid.
Warranty: 2 year
P/N Material Product Weight Weight Limit
1213T Titanium 86g 100kg / 220lbs
P/N Material Product Weight Weight Limit
1219T Titanium 185g 100kg / 220lbs
1252TUBE CLAMP WITH PYRAMID
Titanium Tube Clamp with PyramidThe titanium 30mm tube adapter with pyramid is designed for an optional strength while maintaining low weight. High strength titanium provides high quality and strong product.
Warranty: 2 year
Stainless Steel Tube Clamp with PyramidThe stainless steel 30mm tube clamp with pyramid is made of high strength stainless steel alloys providing a strong and durable component.
Warranty: 2 year
P/N Material Product Weight Weight Limit
1252T Titanium 98g 100kg / 220lbs
1252S Stainless Steel 105g 100kg / 220lbs
Tube Clamps
68 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
CONN
ECTO
RS
M O D U L A R C O M P O N E N T S
12174-HOLE CONNECTOR, PYRAMID
① Titanium 4-Hole Connector, PyramidThe non-rotatable 4-hole titanium pyramid adapter attaches to any socket or knee with a distal 4-hole pattern. Four flat head screws are provided with every pyramid. The 1217T is manufactured by a forged and machined combination resulting in a strong and light weight product.
Warranty: 2 year
② Stainless Steel 4-Hole Connector, PyramidThe non-rotatable 4-hole stainless steel pyramid adapter attaches to any socket or knee with a 4-hole pattern. Four flat head screws are provided with every pyramid. The 1217S is manufactured from high strength stainless steel alloy resulting in a strong and light weight product.
Warranty: 2 year
③ Aluminum 4-Hole Connector, PyramidThe non-rotatable 4-hole aluminum pyramid adapter attaches to any socket or knee with a 4-hole pattern. Four flat head screws are provided with every pyramid. The 1217A is manufactured by a forged and machined combination resulting in a strong and light weight product.
Warranty: 2 year
12274-HOLE CONNECTOR WITHOUT PYRAMID HOLE
The non-rotatable 4-hole titanium connector without pyramid hole attaches to any socket or knee with a distal 4-hole pattern. It comes with 4 flat head screws. The 1227T is manufactured by a forged and machined combination resulting in a strong and light weight product.
Warranty: 2 year
P/N Material Product Weight Weight Limit
① 1217T Titanium 70g 136kg / 300lbs
② 1217S Stainless Steel 111g 125kg / 275lbs
③ 1217A Aluminum 81g 114kg / 250lbs
P/N Material Product Weight Weight Limit
1227T Titanium 73g 159kg / 350lbs
①
②
③
Connectors
69www.stngco.com
CONNECTORS
12204-EAR CONNECTOR, PYRAMID
① Titanium 4-Ear Connector, PyramidThe Titanium 4-Ear Connector provides an option for a one step lami-nation into a transtibial socket. A lamination cover is included with every 4-ear connector. The 1220T is manufactured by a forged and machined combination resulting in a strong and light weight product.
Warranty: 2 year
② Stainless Steel 4-Ear Connector, PyramidThe Stainless Steel 4-Ear Connector provides for a one step lamination into a transtibial socket. A lamination cover is included with every 4-ear connector. The 1220S is manufactured with high strength stainless steel alloy resulting in a strong and light weight product.
Warranty: 2 year
③ Aluminum 4-Ear Connector, PyramidThe Aluminum 4-Ear Connector provides an option for a one step lamination into a transtibial socket. A lamination cover is included with every 4-ear connector. The 1220A is manufactured by a forged and machined combination resulting in a strong and light weight product.
Warranty: 2 year
12304-EAR CONNECTOR WITHOUT PYRAMID HOLE
The 4-ear titanium connector without pyramid hole provides a one step lamination into a transtibial socket. It includes a lamination cover. It provides more strength than the 1220T. The 1230T is manufactured by a forged and machined combination resulting in a strong and light weight product.
Warranty: 2 year
P/N Material Product Weight Weight Limit
① 1220T Titanium 55g 136kg / 300lbs
② 1220S Stainless Steel 97g 125kg / 275lbs
③ 1220A Aluminum 63g 114kg / 250lbs
P/N Material Product Weight Weight Limit
1230T Titanium 58g 159kg / 350lbs
①
②
③
REPLACEMENT PARTS
P/N Description
LD Lamination Dummy for 4-Ear Connector, Pyramid
REPLACEMENT PARTS
P/N Description
LD Lamination Dummy for 4-Ear Connector, Pyramid
Connectors
70 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
CONN
ECTO
RS
M O D U L A R C O M P O N E N T S
12184-HOLE CONNECTOR, RECEIVER
The 4-Hole Connector, Receiver is used to connect to any 4-hole thread system and pyramid connection. Used 4 flat head screws to connect to 4-hole connector. 4 set screws are used for anchoring the making pyramid system as well as for making angular adjustment for alignment. Apply recommended torque to alignment adjustment screws for connection. Apply loctite to all screws once the alignment and connection is finalized.
Warranty: 2 year
12564-EAR CONNECTOR WITH RECEIVER
The 4-Ear Connector with Receiver provides an option for a one step lamination into a transtibial socket.
Warranty: 2 year
P/N Material Product Weight Weight Limit
① 1218T Titanium 53g 136kg / 300lbs
② 1218S Stainless Steel 160g 125kg / 275lbs
③ 1218A Aluminum 84g 114kg / 250lbs
P/N Material Product Weight Weight Limit
1256T Titanium 56g 125kg / 275lbs
1256S Stainless Steel 142g 125kg / 275lbs
①
②
③
12574-PRONG ROTATING BASE WITH ROTATING RECEIVER
The 4-Ear Connector with Rotating Receiver provides an option for a one step lamination into a transtibial socket. The 1257T consists of 1223T (4-Prong Rotating Base) and 1216T (Rotating Receiver).
Warranty: 2 year
P/N Material Product Weight Weight Limit
1257T Titanium 112g 136kg / 300lbs
Connectors
71www.stngco.com
CONNECTORS
12144-HOLE ROTATING BASE
The 4-Hole Rotating Base provides 360º of rotation for pyramid adapter or pyramid receiver. Used with the 1215T, 1225T/S or 1216T/S. All attachment screws are provided with 4-hole base. The 1214T is manufactured by a forged and machined combination resulting in a strong and light weight product.
Warranty: 2 year
12234-HOLE THREADED BASE PLATE
The 4-Hole Threaded Plate is used for socket attachment. It can be used in thermoplastic and laminated socket application. The 4-hole pattern matches the standard 4-hole adapter with pyramid or receiver.
Warranty: 2 year
P/N Material Product Weight Weight Limit
1214T Titanium 80g 136kg / 300lbs
1214S Stainless Steel 120g 125kg / 275lbs
P/N Material Product Weight Weight Limit
1223A Aluminum 65g 125kg / 275lbs
12244-HOLE THREADED BASE PLATE WITH CENTER HOLE
The 4-Hole Threaded Plate with Center Hole is used for socket attachment. It can be used in thermoplastic and laminated socket application. The 4-hole pattern matches the standard 4-hole adapter with pyramid or receiver.
Warranty: 2 year
P/N Material Product Weight Weight Limit
1224A Aluminum 39g 125kg / 275lbs
Connectors
72 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
CONN
ECTO
RS
M O D U L A R C O M P O N E N T S
1209FOAM BLOCK, 4-HOLE ADAPTER
The foam block is designed to be laminated into a socket, and it is typically used for two step lamination process. Socket can be bench aligned onto the foam block and can be set by using any kind of quick setting glue. Once the alignment between the socket and the foam block is set, trim the foam block as needed and prepare it for second lamination. Any 4-hole adapters with European 4-hole pattern will fit onto the foam block adapter.
Warranty: 2 year
14214-PRONG AK ROTATING BASE
The 4-Prong AK adapter is used for lamination onto transfermoral socket. The AK Rotating Base has a new design for improved strength and alignability. This is the ideal base for flexion contracture. It has a manufactured pre-bent prong for ease of alignment and strength. The adapter provides 360 degree of rotation for pyramid adapter or pyramid receiver. This product can be used with the 1215T, 1225T/S or 1216T/S and all EZ ADAPT SERIES.
Warranty: 2 year
P/N Material Product Weight Weight Limit
1421S Stainless Steel 159g 136kg / 300lbs
P/N Material Product Weight Weight Limit
1209W Foam 290g 136kg / 300lbs
12213-PRONG ROTATING BASE
The 3-prong adapter is used for lamination onto transfemoral socket. The adapter provides 360º of rotation for pyramid adapter or pyramid receiver. This product can be used with the 1215T, 1225T/S or 1216T/S. The 1221S is manufactured by a forged and machined combination resulting in a strong and light weight product.
Warranty: 2 year
P/N Material Product Weight Weight Limit
1221S Stainless Steel 116g 136kg / 300lbs
REPLACEMENT PARTS
P/N Description
1221-1 Lamination Dummy for 3-Prong Rotating Base
Connectors
73www.stngco.com
CONNECTORS
12543-PRONG ROTATING BASE WITH ROTATING PYRAMID
Stainless Steel 3-Prong Rotating Base with Titanium Rotating PyramidThe 1254 (3-Rrong Rotating Base with Rotating Pyramid) consists of 1221S (3-Prong Rotating Base) and 1215T (Rotating Pyramid).
Warranty: 2 year
Stainless Steel 3-Prong Rotating Base with Stainless Steel Rotating PyramidThe 1254S (3-Prong Rotating Base with Rotating Pyramid) consists of 1221S (3-prong rotating base) and 1225S (rotating pyramid).
Warranty: 2 year
12553-PRONG PYRAMID CONNECTOR
This 3-Prong Pyramid Connector is used for lamination onto transfemoral socket.
Warranty: 2 year
P/N Material Product Weight Weight Limit
1254 Titanium+Stainless Steel 158g 136kg / 300lbs
1254S Stainless Steel 168g 125kg / 275lbs
P/N Material Product Weight Weight Limit
1255S Stainless Steel 127g 125kg / 275lbs
Connectors12533-PRONG ROTATING BASE WITH ROTATING RECEIVER
Stainless Steel 3-Prong Rotating Base with Titanium Rotating ReceiverThe 1253 (3-Prong Rotating Base with Rotating Receiver) consists of 1221S (3-Prong Rotating Base) and 1216T (Rotating Receiver).
Warranty: 2 year
Stainless Steel 3-Prong Rotating Base with Stainless Steel Rotating ReceiverThe 1253S (3-Prong Rotating Base with Rotating Receiver) consists of 1221S (3-Prong Rotating Base) and 1216S (Rotating Receiver).
Warranty: 2 year
P/N Material Product Weight Weight Limit
1253 Titanium+Stainless Steel 164g 136kg / 300lbs
1253S Stainless Steel 184g 125kg / 275lbs
74 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
CONN
ECTO
RS
M O D U L A R C O M P O N E N T S
1215ROTATING PYRAMID
The Rotating Pyramid can be used with 1214T or 1221S. The 1215T is manufactured by a forged and machined combination providing for high quality, light weight and strong product.
Warranty: 2 year
1225ROTATING PYRAMID WITH HOLE
The Rotating Pyramid with Hole can be used with 1214T or 1221S. The 1225T is forged and machined for high strength and quality.
Warranty: 2 year
P/N Material Product Weight Weight Limit
1225T Titanium 39g 136kg / 300lbs
1225S Stainless Steel 68g 125kg / 275lbs
P/N Material Product Weight Weight Limit
1215T Titanium 42g 136kg / 300lbs
1216ROTATING RECEIVER
The Rotating Pyramid Receiver can be used with 1214T or 1221S. The 1216T is forged and machined for high strength and quality.
Warranty: 2 year
P/N Material Product Weight Weight Limit
1216T Titanium 48g 136kg / 300lbs
1216S Stainless Steel 68g 125kg / 275lbs
Connectors12234-PRONG ROTATING BASE
The 4-Prong Adapter is used for lamination onto transtibial socket. The adapter provides 360º of rotation for pyramid adapter or pyramid receiver. This product can be used with the 1215T, 1225T/S or 1216T/S. The 1223T is manufactured from high quality and strong product.
Warranty: 2 year
P/N Material Product Weight Weight Limit
1223T Titanium 64g 136kg / 300lbs
75www.stngco.com
FOOT ADAPTERS
1231SACH FOOT ADAPTER
① Titanium SACH Foot AdapterThe Titanium Foot Adapter has a shorter flange providing better strength with reducing weight. The 1231T is manufactured by a forged and machined combination providing for high quality, light weight and strong product. A foot bolt is provided with every adapter.
Warranty: 2 year
② Stainless Steel SACH Foot AdapterThe Stainless Steel Foot Adapter is manufactured with high strength stainless steel alloy providing for high quality and strong product. A foot bolt is provided with every adapter.
Warranty: 2 year
③ Aluminum SACH Foot AdapterThe Aluminum Foot Adapter is manufactured by a forged and machined combination providing for high quality and strong product. The flange is manufactured with stainless steel to reduce fatigue at the attachment site. A foot bolt is provided with every adapter.
Warranty: 2 year
P/N Material Product Weight Weight Limit
① 1231T Titanium 80g 136kg / 300lbs
② 1231S Stainless Steel 112g 125kg / 275lbs
③ 1231A Aluminum 105g 114kg / 250lbs
REPLACEMENT PARTS
P/N Description
1231-1 Bolt for SACH Foot Adapter
①
②
③
Included in delivery : 1 cap screw, 1 washer
Foot Adapters
76 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
FOOT
ADA
PTER
S
M O D U L A R C O M P O N E N T S
1232SINGLE AXIS FOOT ADAPTER
① Titanium Single Axis Foot AdapterThe articulating ankle joint comes with plantar flexion stop made of elastic member, thus providing elastic plantar flexion stop.
Warranty: 1 year
② Stainless Steel Single Axis Foot AdapterThe articulating ankle joint comes with plantar flexion stop made of elastic member, thus providing elastic plantar flexion stop.
Warranty: 1 year
③ Aluminum Single Axis Foot AdapterThe articulating ankle joint comes with plantar flexion stop made of elastic member, thus providing elastic plantar flexion stop.
Warranty: 1 year
P/N Foot Size Material Product Weight
Weight Limit
① 1232T 1233T
Small (22~25cm)Large (26~30cm) Titanium 197g
203g 100kg / 220lbs
② 1232S 1233S
Small (22~25cm)Large (26~30cm) Stainless Steel 305g
317g 100kg / 220lbs
③ 1232A 1233A
Small (22~25cm)Large (26~30cm) Aluminum 223g
227g 90kg / 198lbs
REPLACEMENT PARTS
P/N Description
1232-1 Single Component Pack for Single Axis Ankle
Included in delivery : 1 lower joint bushing, 1 rubber bumper, 2 nuts, 1 anti rotation bridge.
①
②
③
Foot Adapters
77www.stngco.com
HEAVY DUTY SYSTEMS–
375LBS SYSTEM
375lbs System
① 1209C – Heavy Duty Carbon TubeThe 1209C carbon tube has a diameter of 30mm and length of 305mm.
Warranty: 2 year
② 3212T – Heavy Duty Tube ClampThe heavy duty 30mm tube clamp adapter is designed for an optimum strength while maintaining low weight. A forged and machined combi-nation resulting in a strong and light weight product.
Warranty: 2 year
③ 3230T – Heavy Duty 4-ear Connector, PyramidThe heavy duty 4-ear connector provides an option for a one step lamination into a transtibial socket. The 3230T is manufactured by a forged and machined combination resulting in a strong and light weight product.
Warranty: 2 year
④ 3231T – Heavy Duty SACH Foot AdapterThe heavy duty foot adapter has a shorter flange providing better strength with reducing weight. The 3231T is manufactured by a forged and machined combination resulting in a strong and light weight product. A foot bolt is provided with every adapter.
Warranty: 2 year
①
②
③
④
P/N Material Product Weight Weight Limit
① 1209C Carbon 79g 170kg / 375lbs
② 3212T Titanium 128g 170kg / 375lbs
③ 3230T Titanium 83g 170kg / 375lbs
④ 3231T Titanium 117g 170kg / 375lbs
375 lbs System
78 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
HEAV
Y DU
TY S
YSTE
MS–
500L
BS S
YSTE
M
M O D U L A R C O M P O N E N T S
500lbs System
① 5209C – Heavy Duty Carbon TubeThe 5209C carbon tube has a diameter of 34mm and length of 305mm.
Warranty: 2 year
② 5212T – Heavy Duty Tube ClampThe heavy duty 34mm tube clamp adapter is designed for an optimum strength while maintaining low weight. A forged and machined combination resulting in a strong and light weight product.
Warranty: 2 year
③ 5220T – Heavy Duty 4-Ear Connector, PyramidThe heavy duty 4-ear connector provides an option for a one step lamination into a transtibial socket. The 5220T is manufactured by a forged and machined combination resulting in a strong and light weight product.
Warranty: 2 year
P/N Material Product Weight Weight Limit
① 5209C Carbon 269g 227kg / 500lbs
② 5212T Titanium 167g 227kg / 500lbs
③ 5220T Titanium 141g 227kg / 500lbs
500 lbs System
①
②
③
79www.stngco.com
BK KITS–TI, SS &
AL
110TTITANIUM BK KIT
Titanium BK Kit consists of 1212T (tube clamp) and 1211T (tube clamp assembly).
Warranty: 2 year
P/N Material Product Weight Weight Limit
110T Titanium 385g 136kg / 300lbs
110SSTAINLESS STEEL BK KIT
Stainless Steel BK Kit consists of 1212S (tube clamp) and 1211S (tube clamp assembly).
Warranty: 2 year
P/N Material Product Weight Weight Limit
110S Stainless Steel 472g 114kg / 250lbs
110AALUMINUM BK KIT
Aluminum BK Kit consists of 1212A (tube clamp) and 1211A (tube clamp assembly).
Warranty: 2 year
P/N Material Product Weight Weight Limit
110A Aluminum 390g 114kg / 250lbs
BK Kits – Ti, SS & Al
80 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
HEAV
Y DU
TY B
K KI
TS
M O D U L A R C O M P O N E N T S
310T375LBS BK KIT
375lbs BK Kit consists of 3212T (tube clamp) x 2 pieces, 3230T (4-ear connector) and 1209C (carbon tube).
Warranty: 2 year
P/N Material Product Weight Weight Limit
310T Titanium/Carbon 441g 170kg / 375lbs
510T500LBS BK KIT
500lbs BK Kit consists of 5212T (tube clamp) x 2 pieces, 5220T (4-ear connector) and 5209C (carbon tube).
Warranty: 2 year
P/N Material Product Weight Weight Limit
510T Titanium/Carbon 744g 227kg / 500lbs
BK Kits – Heavy Duty
P R O S T H E T I CF E E T
82 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
PROS
THET
IC F
EET
P R O S T H E T I C F E E T
1106EZ-STEP FOOT
• High-tech performance with simplicity• Optimum flexibility and toe response• Soft heel cushion with smooth rollover• Easy adaptation for amputees with lower activity level
PDAC approved HCPCS code(s): L5972• To download PDAC Letter please visit our website at www.stngco.com
Warranty: 1 year
P/N ProductDescription
WeightLimit
Product Weight
BuildHeight
1106 EZ STEP FOOT 100kg /220lbs 597g 83mm /
3.27in
Size Weight Limit-100kg / 220 lbs Size Weight Limit-100kg /
220 lbs
22 Left 1106=22L-220 26 Left 1106=26L-220
22 Right 1106=22R-220 26 Right 1106=26R-220
23 Left 1106=23L-220 27 Left 1106=27L-220
23 Right 1106=23R-220 27 Right 1106=27R-220
24 Left 1106=24L-220 28 Left 1106=28L-220
24 Right 1106=24R-220 28 Right 1106=28R-220
25 Left 1106=25L-220 29 Left 1106=29L-220
25 Right 1106=25R-220 29 Right 1106=29R-220
Integrated foam for added durabilityMultiple keel for compounding flexibility
Big heel cushion for comfort
Feet
FLEXIBLE KEEL FOR K2 ACTIVITY
Note: Approximate weight and build height taken on size 26
83www.stngco.com
PROSTHETIC FEET
1109MOTION STEP FOOT
• Multi axial ankle motion• Variable ankle motion resistance• Pyramid version for ankle joint• K1-K3 activity level foot• Sizes: 22-27
Suggested L-Code: ANKLE L5986 / FOOT L5972• K1-K2 activity level – weight limit up to 125kg (275lbs)• K3 activity level – MAXIUM WEIGHT LIMIT up to 100kg (220lbs)
Warranty: 1 year
Size
MOTION STEPWeight Limit-60kg to80kg
132 lbs to 176 lbs
MOTION STEPWeight Limit-80kg to100kg
176 lbs to 220 lbs
MOTION STEPWeight Limit-100kg to125kg
220 lbs to 275 lbs
22 Left 1109=22L-176 1109=22L-220 1109=22L-275
22 Right 1109=22R-176 1109=22R-220 1109=22R-275
23 Left 1109=23L-176 1109=23L-220 1109=23L-275
23 Right 1109=23R-176 1109=23R-220 1109=23R-275
24 Left 1109=24L-176 1109=24L-220 1109=24L-275
24 Right 1109=24R-176 1109=24R-220 1109=24R-275
25 Left 1109=25L-176 1109=25L-220 1109=25L-275
25 Right 1109=25R-176 1109=25R-220 1109=25R-275
26 Left 1109=26L-176 1109=26L-220 1109=26L-275
26 Right 1109=26R-176 1109=26R-220 1109=26R-275
27 Left 1109=27L-176 1109=27L-220 1109=27L-275
27 Right 1109=27R-176 1109=27R-220 1109=27R-275
P/N Product Description Product Weight Build Height
1109 Motion Step Foot 794g 60mm / 2.36in
REPLACEMENT Rubber Ring for Motion Step Foot
P/N Product Image Weight Limit
1109SNB-Y 100kg / 220lbs = Yellow
1109SNB-B 125kg / 275lbs = Blue
Feet
Note: Approximate weight and build height taken on size 26
84 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
PROS
THET
IC F
EET
P R O S T H E T I C F E E T
1110DYNAMIC STEP FOOT
CARBON FIBER Energy Storing K3 Foot
• Energy storing K3 foot• Good heel strike and toe off resistance• Comes with foot shell
Suggested L-Code: L5976
Warranty: 1 year
P/N Product Description Product Weight Build Height
1110 Dynamic Step Foot 590g 54mm / 2.13in
SizeSTANDARD (FS)
Weight Limit-70kg / 155 lbs
STANDARD (FS)Weight Limit-90kg / 200 lbs
23 Left 1110=23L-155
23 Right 1110=23R-155
24 Left 1110=24L-155
24 Right 1110=24R-155
25 Left 1110=25L-155 1110=25L-200
25 Right 1110=25R-155 1110=25R-200
26 Left 1110=26L-200
26 Right 1110=26R-200
27 Left 1110=27L-200
27 Right 1110=27R-200
28 Left 1110=28L-200
28 Right 1110=28R-200
Feet
Note: Approximate weight and build height taken on size 26
85www.stngco.com
PROSTHETIC FEET
1101SINGLE AXIS FOOT
The single axis foot is to be used with single axis ankle joints(1232T/1233T, 1232S/1233S, 1232A/1233A). • Activity level K1 +
Suggested L-Code: L5974
Warranty: 1 year
P/N ProductDescription
WeightLimit Product Weight Build
Height
1101 1101 = 21 – 30Left / Right 100kg / 220lbs 430g 62mm /
2.44in
Feet
Note: Approximate weight and build height taken on size 26
1232SINGLE AXIS FOOT ADAPTER
① Titanium Single Axis Foot AdapterThe articulating ankle joint comes with plantar flexion stop made of elastic member, thus providing elastic plantar flexion stop.
Warranty: 1 year
② Stainless Steel Single Axis Foot AdapterThe articulating ankle joint comes with plantar flexion stop made of elastic member, thus providing elastic plantar flexion stop.
Warranty: 1 year
③ Aluminum Single Axis Foot AdapterThe articulating ankle joint comes with plantar flexion stop made of elastic member, thus providing elastic plantar flexion stop.
Warranty: 1 year
P/N Foot Size Material Product Weight
Weight Limit
① 1232T 1233T
Small (22~25cm)Large (26~30cm) Titanium 197g
203g 100kg / 220lbs
② 1232S 1233S
Small (22~25cm)Large (26~30cm) Stainless Steel 305g
317g 100kg / 220lbs
③ 1232A 1233A
Small (22~25cm)Large (26~30cm) Aluminum 223g
227g 90kg / 198lbs
REPLACEMENT PARTS
P/N Description
1232-1 Single Component Pack for Single Axis Ankle
Included in delivery : 1 lower joint bushing, 1 rubber bumper, 2 nuts, 1 anti rotation bridge.
①
②
③
86 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
PROS
THET
IC F
EET
P R O S T H E T I C F E E T
1102SACH FOOT
Internal heel wedge provides soft heel strike.• Activity level K1 +
Suggested L-Code: L5970
Warranty: 1 year
P/N ProductDescription
WeightLimit Product Weight Build
Height
1102 1102 = 21 – 30Left / Right 100kg / 220lbs 580g 72.5mm /
2.85in
Note: Approximate weight and build height taken on size 26
Feet
1231SACH FOOT ADAPTER
① Titanium SACH Foot AdapterThe titanium foot adapter has a shorter flange providing better strength with reducing weight. The 1231T is manufactured by a forged and machined combination resulting in a strong and light weight product. A foot bolt is provided with every adapter.
Warranty: 2 year
② Stainless Steel SACH Foot AdapterThe stainless steel foot adapter is manufactured with high strength stainless steel alloy resulting in a strong and light weight product. A foot bolt is provided with every adapter.
Warranty: 2 year
③ Aluminum SACH Foot AdapterThe aluminum foot adapter is manufactured by a forged and machined combination resulting in a strong and light weight product. The flange is manufactured with stainless steel to reduce fatigue at the attachment site. A foot bolt is provided with every adapter.
Warranty: 2 year
P/N Material Product Weight Weight Limit
① 1231T Titanium 80g 136kg / 300lbs
② 1231S Stainless Steel 112g 125kg / 275lbs
③ 1231A Aluminum 105g 114kg / 250lbs
①
②
③
M A T E R I A L S & T O O L S
88 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
MAT
ERIA
LS
M A T E R I A L S & T O O L SMaterials
4011 NSP™NSP™ - DYNAMIC STIFFNESS WITH 10X THE IMPACT RESISTANCE
NSP™ is a unique fiber that is lighter, stronger, offers ½ the stiffness and 10X the impact resistance than carbon. The stiffness can be regu-lated by fiber orientation to be equal to carbon. NSP™ can be stiff or flexible depending upon practitioner preference. NSP™ wets out fast because of its high fiber interface and low void content. Translated the resin sticks and air does not get trapped easily.
NSP™ does not create any flying fibers and therefore it ELIMINATES THE ITCH factor which all practitioners and technicians love. • Provides great fatigue strength for the socket• Tested in socket form under ISO guidelines for patients up to 500 lbs• Available in 3, 4, 5, 6, 8 and 10 inch width and 10 and 50 feet length
Result: strong socket that is lighter and more cost effective than carbon fiber socket
P/N Description
4011-3.10 NSP™ Braid, 3 in x 10 ft
4011-3.50 NSP™ Braid, 3 in x 50 ft
4011-4.10 NSP™ Braid, 4 in x 10 ft
4011-4.50 NSP™ Braid, 4 in x 50 ft
4011-5.10 NSP™ Braid, 5 in x 10 ft
4011-5.50 NSP™ Braid, 5 in x 50 ft
4011-6.10 NSP™ Braid, 6 in x 10 ft
4011-6.50 NSP™ Braid, 6 in x 50 ft
4011-8.10 NSP™ Braid, 8 in x 10 ft
4011-8.50 NSP™ Braid, 8 in x 50 ft
4011-10.10 NSP™ Braid, 10 in x 10 ft
4011-10.50 NSP™ Braid, 10 in x 50 ft
89www.stngco.com
MATERIALS
Materials4012 CSPCSP - DYNAMIC STIFFNESS WITH 10X THE IMPACT RESISTANCE
CSP is a unique fiber that is lighter, stronger, offers ½ the stiffness and 10X the impact resistance than carbon. The stiffness can be regulated by fiber orientation to be equal to carbon. CSP can be stiff or flexible depending upon practitioner preference. CSP wets out fast because of its high fiber interface and low void content. Translated the resin sticks and air does not get trapped easily.
CSP does not create any flying fibers and therefore it ELIMINATES THE ITCH factor which all practitioners and technicians love. • Provides great fatigue strength for the socket• Tested in socket form under ISO guidelines for patients up to 500 lbs• Available in 3, 4, 5, 6 and 8 inch width & 10 and 50 feet length
Result: strong socket that is lighter and more cost effective than carbon fiber socket
P/N Description
4012-3.10 CSP Braid, 3 in x 10 ft
4012-3.50 CSP Braid, 3 in x 50 ft
4012-4.10 CSP Braid, 4 in x 10 ft
4012-4.50 CSP Braid, 4 in x 50 ft
4012-5.10 CSP Braid, 5 in x 10 ft
4012-5.50 CSP Braid, 5 in x 50 ft
4012-6.10 CSP Braid, 6 in x 10 ft
4012-6.50 CSP Braid, 6 in x 50 ft
4012-8.10 CSP Braid, 8 in x 10 ft
4012-8.50 CSP Braid, 8 in x 50 ft
90 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
MAT
ERIA
LS
M A T E R I A L S & T O O L SMaterials Crush Comparison TestDemonstrating point of material failure.
CARBON
NSP™
Result:Carbon failed at a significantly lower impact than NSP™ fiber resulting in socket structure failure.
Result:Dynamic socket that is lighter and more cost effective than carbon fiber socket.
91www.stngco.com
MATERIALS
NSP™ / CSP FABRICATION INFORMATION
NSP™ / CSP Technical Data
Cutting NSP™ / CSP Fiber:• Before cutting NSP™ / CSP fiber, tape the edge of the fiber with masking tape then cut down the middle of the tape line.• Use a scissor with a serrated edge.• If you attempt to cut NSP™ / CSP fiber with a smooth bladed scissor, use very sharp scissors then fold the braid over on itself– (doubling up) greatly helps.
Lamination:NSP™ / CSP is a high tech strong fiber. It requires a strong resin like 80:20 to contain the fiber when grinding. For the best edging results, the use of Perlon, Nylon or 1/2oz Dacron felt is ideal as the first layer and the last layer.
Grinding:• Use high speed and low pressure.• Only use sharp abrasives, dull abrasives will create friction and will “burn off” the resin and leave exposed fibers at your edge.
Note: “Burn off” is when the resin heats up with friction and melts or shrinks back, exposing the fiber contents. Edging Techniques:(The use of inner and outer finish layers is required. See example TT & TF Layup.)
Finishing edge instructions: Finish as you would any composite by wet sanding using 220 grit and finish with 400 grit wet/dry sanding paper.
EXAMPLE LAYUP for TT and TF:
Example Layup TT:• 80:20 Resin (or a good resin)• 1 layer of 1/2oz felt or 2 layers of Perlon or Nylon• 1 layer of NSP™ or CSP• 2 layers of Nyglass or equivalent Reinforce with carbon or NSP™ uni-tapes as needed• 1 layer of NSP™ or CSP• 2 layers of sheer nylon or equivalent
Example Layup TF:• 80:20 Resin (or a good resin)• 1 layer of 1/2oz felt or 2 layers of Perlon or Nylon• 1 layer of NSP™ or CSP• 2 layers of Nyglass or equivalent Reinforce with carbon or NSP™ uni-tapes as needed• 1 layer of NSP™ or CSP• 2 layers of sheer nylon or equivalent
The NSP™ material can create incredible color combinations when using pigment.
92 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
MAT
ERIA
LS
M A T E R I A L S & T O O L SMaterials
4017 PARALEX
PARALEX blends Carbon and NSP™ to create a new and dynamic hybrid material.
P/N Description
4017-3.10 PARALEX Tube, 3 in x 10 ft
4017-3.50 PARALEX Tube, 3 in x 50 ft
4017-4.10 PARALEX Tube, 4 in x 10 ft
4017-4.50 PARALEX Tube, 4 in x 50 ft
4017-5.10 PARALEX Tube, 5 in x 10 ft
4017-5.50 PARALEX Tube, 5 in x 50 ft
4017-6.10 PARALEX Tube, 6 in x 10 ft
4017-6.50 PARALEX Tube, 6 in x 50 ft
4017-8.10 PARALEX Tube, 8 in x 10 ft
4017-8.50 PARALEX Tube, 8 in x 50 ft
4017-10.10 PARALEX Tube, 10 in x 10 ft
4017-10.50 PARALEX Tube, 10 in x 50 ft
NSP™ + CARBON = Dynamic StrengthStiffness + Lighter Weight
= PARALEX
93www.stngco.com
MATERIALS
The NSP™ material within the Paralex can create incredible color combinations when
using pigment.
PARALEX FABRICATION INFORMATION
PARALEX Technical Data
Cutting PARALEX Fiber:• Before cutting PARALEX fiber, tape the edge of the fiber with masking tape then cut down the middle of the tape line.• Use a scissor with a serrated edge.• If you attempt to cut PARALEX fiber with a smooth bladed scissor, use very sharp scissors then fold the braid over on itself – (doubling up) greatly helps.
Lamination:For the best edging results, the use of Perlon, Nylons or 1/2oz Dacron felt is ideal as the first layer and the last layer.• For best results use 80:20 resin
Grinding:• Use high speed and low pressure.• Only use sharp abrasives, dull abrasives will create friction and will “burn off” the resin and leave exposed fibers at your edge.
Edging Techniques:(The use of inner and outer finish layers is required. See example TT & TF Layup.)
Finishing edge instructions: Finish as you would any composite by wet sanding using 220 grit and finish with 400 grit wet/dry sanding paper.
EXAMPLE LAYUP for TT and TF:
Example Layup TT:• Typical TT• 1 layer of 1/2oz felt or 2 layers of Perlon or Nylon• 1 layer of PARALEX• 2 layers of Nyglass or equivalent • 1 layer of PARALEX• 2 layers of sheer nylon or equivalent
Example Layup TF:• Typical TF• 1 layer of 1/2oz felt or 2 layers of Perlon or Nylon• 1 layer of PARALEX• 2 layers of Nyglass or equivalent• 1 layer of PARALEX• 2 layers of sheer nylon or equivalent
94 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
MAT
ERIA
LS
M A T E R I A L S & T O O L S
P/N Description
4019-3.10 ULTRA 6 CARBON, 3in x 10ft
4019-3.50 ULTRA 6 CARBON, 3in x 50ft
4019-4.10 ULTRA 6 CARBON, 4in x 10ft
4019-4.50 ULTRA 6 CARBON, 4in x 50ft
4019-5.10 ULTRA 6 CARBON, 5in x 10ft
4019-5.50 ULTRA 6 CARBON, 5in x 50ft
4019-6.10 ULTRA 6 CARBON, 6in x 10ft
4019-6.50 ULTRA 6 CARBON, 6in x 50ft
4019-8.10 ULTRA 6 CARBON, 8in x 10ft
4019-8.50 ULTRA 6 CARBON, 8in x 50ft
4019-10.10 ULTRA 6 CARBON, 10in x 10ft
4019-10.50 ULTRA 6 CARBON, 10in x 50ft
P/N Description
4018-1 30 ULTRA 6 CARBON TAPE, 1in x 30ft
4018-3 30 ULTRA 6 CARBON TAPE, 3in x 30ft
4018-3 100 ULTRA 6 CARBON TAPE, 3in x 100ft
4018 ULTRA6 CARBON TAPE
New lighter weight uni-directional carbon tape for optimum strength
4019ULTRA6 CARBON BRAID
For smooth, conforming, light and strong lamination
• Thinner and lighter without sacrificing strength• Conforms and wets out better with resin• Cost comparable to regular carbon
Materials
Thinner than a coin
95www.stngco.com
MATERIALS
4016CARBON BRAID
• 12K strand count• Designed for improved polyester and fiber interface• Decreased fraying (less dust)
P/N Description
4016-3.10 CARBON Braid, 3in x 10ft
4016-3.50 CARBON Braid, 3in x 50ft
4016-4.10 CARBON Braid, 4in x 10ft
4016-4.50 CARBON Braid, 4in x 50ft
4016-5.10 CARBON Braid, 5in x 10ft
4016-5.50 CARBON Braid, 5in x 50ft
4016-6.10 CARBON Braid, 6in x 10ft
4016-6.50 CARBON Braid, 6in x 50ft
4016-8.10 CARBON Braid, 8in x 10ft
4016-8.50 CARBON Braid, 8in x 50ft
4016-10.10 CARBON Braid, 10in x 10ft
4016-10.50 CARBON Braid, 10in x 50ft
Materials
96 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
MAT
ERIA
LS
M A T E R I A L S & T O O L S
4013C-FORM CONFORMING CAST TAPE
The closest you will come to “Plaster” in a Synthetic Cast Tape
• Conforms nicely to complex shapes• Allows for the practitioner to produce a more conforming cast• No plaster mess• Ample time to work with before it hardens• No need for special glove, a regular casting glove is fine to use• Resin does not stick to the glove like typical fiber glass casting tape• Very rigid cast once finished• Cost effective (based on comparable conforming casting tapes)
P/N Description
4013-2 C-Form Casting Tape - White W 2in x L 4yd (box=10 rolls)
4013-3 C-Form Casting Tape - White W 3in x L 4yd (box=10 rolls)
4013-4 C-Form Casting Tape - White W 4in x L 4yd (box=10 rolls)
4013-5 C-Form Casting Tape - White W 5in x L 4yd (box=10 rolls)
Materials
97www.stngco.com
MATERIALS
P/N Description
4040-st EZ CUTTER - Standard
4040-sm EZ CUTTER - Small
4040EZ CUTTER KNIFE
Designed for cutting C-FORM & R-FORM
• The safest utility cutter on the market today• Reduce workplace lacerations• Provides a recessed blade which eliminates injuries• Perfect for cutting through C-FORM AFO Casts• CUT AT A SLIGHT ANGLE
4015R-FORM FIBERGLASS CAST TAPE
• Finished cast is strong and durable• Radiolucent - superb to see through by X-ray• Available in white only
P/N Description
4015-2 R-Form Casting Tape, Fiberglass, W 2in x L 4yd, White (box=10 rolls)
4015-3 R-Form Casting Tape, Fiberglass, W 3in x L 4yd, White (box=10 rolls)
4015-4 R-Form Casting Tape, Fiberglass, W 4in x L 4yd, White (box=10 rolls)
4015-5 R-Form Casting Tape, Fiberglass, W 5in x L 4yd, White (box=10 rolls)
Materials
98 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
MAT
ERIA
LS
M A T E R I A L S & T O O L S
4030 UNI-GRIP
This unique fabric sheet with pressure sensitive adhesive back provides versatile application for prosthetic and orthotic needs. UNI-GRIP’s biased direction texture provides grip in one direction while providing free glide in the other direction.
Some of the possible applications:• Restrict rotation of stump in AK socket• Suspension for BK and AK socket• Prevent pistoning of the stump in the socket• Restrict migration of orthotics
P/N Description
4030-1 Uni-Grip, 1 sheet of 8 strips
Materials
Un-Grip vertically placed creates suspension
Uni-Grip horizontally placed eliminates rotation
99www.stngco.com
TOOLS
1124THE DOFF N’ DONNER
The Doff N’ Donner takes the work out of applying compression stockings. It conforms to the garment, which increases the life of the garment. Invented with a “push” mentality rather than the “pull” strategy, the Doff N’ Donner easily rolls over bandages, wet limbs and even scar management pads. Don & Doff compression garments of all shapes and compression without frustration.
P/N Description
1124 Doff N’ Donner
212POLE FOR THE DOFF N’ DONNER
The POLE is the device that “loads” or helps roll the stocking onto the Doff N’ Donner. The base of this pole allows for both foot hold as well as suction. We would recommend this item for those that do not have a surface to use a suction cup on.Please note: The power of the suction cup may leave behind a ring when used on a stained finished surface.
P/N Description
212 Poll for Doff N’ Donner
222CONE FOR THE DOFF N’ DONNER
The CONE is the device that “loads” or helps roll the stocking onto the Doff N’ Donner. This device works better for open toe garments, however we have found it to work well with all garment types. The base of the cone attaches to any clean flat surface using a suction cup.Please note: The power of the suction cup may leave behind a ring when used on a stained finished surface.
P/N Description
222 Cone for the Doff N’ Donner
DD008STERILIZATION BAGS FOR DOFF N’ DONNER
P/N Description
DD008 Sterilization Bags for Doff N’ DonnerQTY: 100 Bags
Tools
100 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
TOOL
S
M A T E R I A L S & T O O L S
4001EZ COVER
EZ Cover eliminates the need to grind and shape, a common labor intense process required for foam covers. Simply adjust to the proper circumferential size and cut as needed. Anyone can make a cover in 5 minutes easily.
Please do not use or apply heat to the EZ COVER or leave in an area that can expose the EZ COVER to extreme heat temperatures.
Warranty: 90 days
P/N Description
4001 EZ Cover
SFAFOAM COVER FOR ABOVE KNEE
• Durable foam• 30˚ knee flexion• Preshaped• Center hole• Flame resistant• 30˚ knee flexion
P/N Description
SFA=36L Foam Cover for Above Knee, Calf Circum. 36cm, Left
SFA=36R Foam Cover for Above Knee, Calf Circum. 36cm, Right
SFA=40L Foam Cover for Above Knee, Calf Circum. 40cm, Left
SFA=40R Foam Cover for Above Knee, Calf Circum. 40cm, Right
SFA=44L Foam Cover for Above Knee, Calf Circum. 44cm, Left
SFA=44R Foam Cover for Above Knee, Calf Circum. 44cm, Right
SFBFOAM COVER FOR BELOW KNEE
• Flexible foam• Unshaped• Center hole• Flame resistant• Skin color
P/N Description
SFB Foam Cover for Below Knee top=15” bottom=12” height=17”
Tools
101www.stngco.com
TOOLS
3180-1MFABRICATION DUMMY FOR MAGLOCK
P/N Description
3140-1 Fabrication Dummy Kit for Shuttle Lock 3140
3130-1 (3130/3160) & 3150-1 (3150/3190)FABRICATION DUMMY KIT FOR CLUTCH LOCK
P/N Description
① 3130-1 Fabrication Dummy Kit for Clutch Lock 3130 / 3160
② 3150-1 Fabrication Dummy Kit for Clutch Lock 3150
③ 3150-1 Fabrication Dummy Kit for EZ Lock 3190
3140-1FABRICATION DUMMY KIT FOR SHUTTLE LOCK
P/N Description
3180-1M Dummy for MAGLOCK Fabrication with ring
Tools
①
②
③
102 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
TOOL
S
M A T E R I A L S & T O O L S
3213EASY DONNING SLEEVE
The easy donning sleeve is an aid which reduces the forces required to put on a prosthetic socket and also prevents the friction and pain that can be caused when donning the prosthetic socket.
Features:• Easy to don the AK socket with valve hole• Ensures good fit between stump and socket• Easy to use and carry• Optimum friction reduction between stump and socket• Durable• Can be hand-washed
RT-100RATCHETING BUCKLE
Ratcheting buckle can be used as straps in any orthotic application. The ratchet design makes it easy for the patient to don the brace with little effort and the quick release enables the patient to doff the brace easily as well. Two colors are available.
P/N Description Width Length
3213-S Small Easy Donning Sleeve 28cm/11in 96cm/37.5in
3213-M Medium Easy Donning Sleeve 34cm/13in 97cm/38in
3213-L Large Easy Donning Sleeve 40cm/16in 104cm/41in
P/N Description
RT-100-W Ratcheting Buckle, White
RT-100-B Ratcheting Buckle, Black
Tools
R E P L A C E M E N T P A R T S
104 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
REPL
ACEM
ENT
PART
S
R E P L A C E M E N T P A R T S
1101-1CONNECTION CAP FOR SINGLE AXIS FEET
P/N Description Size
1101-1 Connection Cap for P/N 1101 22 thru 28
1232-1SINGLE COMPONENT PACK FOR SINGLE AXIS FEET
Included in delivery:• 1 Lower joint bushing• 1 Rubber bumper• 2 Nuts• 1 Anti-rotation bridge
P/N Description
1232-1 Single Component Pack for P/N 1232/1233
PA13PYRAMID ADAPTER FOR AK
P/N Description
PA13 Pyramid Adapter for P/N L1321, 1321, 1322, 1323, 1324 and 1326
LA13LOTUS ADAPTER FOR KD
P/N Description
LA13 Lotus Adapter for P/N L1321, 1321, 1322, 1323, 1324 and 1326
Replacement Parts
105www.stngco.com
REPLACEMENT PARTS
Replacement PartsLY13LANYARD FOR MANUAL LOCKING KNEE
P/N Description
LY13 Lanyard for P/N 1313, 1313A-N, 1315, 1318, L1321 and P313
LDLAMINATION DUMMY FOR 4-EAR CONNECTOR, PYRAMID
P/N Description
LD Lamination Dummy for P/N 1220 and 1230
1221-1LAMINATION DUMMY FOR PRONG ROTATING BASE
P/N Description
1221-1 Lamination Dummy for P/N 1221S
1311-1EXTENSION ASSIST KIT AND CABLE FOR WEIGHT BRAKE KNEE
P/N Description
1311-1 Extension Assist Kit and Cable for P/N 1311
106 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
REPL
ACEM
ENT
PART
S
R E P L A C E M E N T P A R T S
CLPPIN FOR CLUTCH LOCK
P/N Description Length
3140-SP Short Pin for Base Shuttle Lock 3140 1 inch
3140-MP Medium Pin for Base Shuttle Lock 3140 1.5 inch
3140-LP Long Pin for Base Shuttle Lock 3140 2 inch
3140-XLP X-Long Pin for Base Shuttle Lock 3140 2.5 inch
3140PIN FOR SHUTTLE LOCK
P/N Description
CLP Pin for Clutch Lock 3130 / 3150 / 3160
Replacement Parts1231-1BOLT FOR SACH FOOT ADAPTER
Included in delivery:• 1 Cap screw• 1 Washer
P/N Description
1231-1 Bolt for P/N 1231
107www.stngco.com
REPLACEMENT PARTS
PA31AK ADAPTER FOR PEDIATRIC KNEE
KA31KD ADAPTER FOR PEDIATRIC KNEE
1109SNB & 1109SNFREPLACEMENT RUBBER KIT FOR MOTION STEP ANKLE
P/N Description
PA31 AK Adapter for Pediatric Knee
P/N Description
KA31 KD Adapter for Pediatric Knee
P/N Description
1109SNB-Y REPLACEMENT Rubber Kit for Motion Step Foot, 100kg / 220lbs Yellow
1109SNF-B REPLACEMENT Rubber Kit for Motion Step Foot, 125kg / 275lbs Blue
Replacement Parts
108 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
TORQ
UE V
ALUE
S FO
R ST
&G
PROD
UCTS
T O R Q U E V A L U E S F O R S T & G P R O D U C T S 04-27-16
P/N TYPE Torque (Nm) Hex (mm)
1212T, 1222T, 3212T M6 Cap Screw 7 Nm 5mm wrench
1212MS, 1219T, 1252T/S, 1751T M5 Cap Screw 7 Nm 4mm wrench
1212S M6 Cap Screw 10 Nm 5mm wrench
1212A M5 Cap Screw 6 Nm 4mm wrench
1213T M5 Cap Screw 10 Nm 4mm wrench
1214T/S, 1221S, 1223T ,1421S M6 Cap Screw 10 Nm 5mm wrench
1201T/S, 1202T/S, 1203T/S, 1204T/S, 1205T, 1211T/S, 1212T, 1212S, 1212MS,
1213T, 1216T/S, 1218T/S, 1219T, 1228T/S, 1229T/S, 1241T,
1252T/S, 1256T/S,1261T/S, 1262T/S, 1263T/S, 1264T/S1702T, 1703T, 1704T, 1705T, 1751T
M8 Set Screw (Alignment Adjustment Screw) 15 Nm 4mm wrench
1211A, 1211A-OP, 1212A M8 Set Screw (Alignemnt Adjustment Screw) 10 Nm 4mm wrench
1214T/S, 1217T/S, 1227T 1218T/S M6 Flat Head Screw (Mount Screw) 10 Nm 4mm wrench
1231T/S/A M10 Cap Screw (Attachment Bolt) 30 Nm 8mm wrench
5212T M6 Cap Screw 10 Nm 5mm wrench
5212T M10 Set Screw (Alignment Adjustment Screw) 20 Nm 5mm wrench
1321/L1321 1322/1323 1324/1325 1326/1319
1320/1341, 1332A
M6 Cap Screw (Tube Clamp Torque Setting) 12 Nm 5mm wrench
1321/L1321 1322/1323 1324/1326
M10 Bolt (Pyramid Center Bolt) 18 Nm 8mm wrench
M0703 M5 Cap Screw 8 Nm 4mm wrench
1313A-N M6 Cap Screw 14 Nm 5mm wrench
P313/P317 M6 Cap Screw 10 Nm 5mm wrench
P212A M5 Cap Screw 4 Nm 4mm wrench
P212A, P211A M6 Set Screw (Alignment Adjustment Screw) 10 Nm 3mm wrench
P231A M8 Cap Screw (Attachment Bolt) 20 Nm 6mm wrench
3010L/3020L Ratchet & Clutch Pin 4 Nm 7mm spanner
Note: Recommend apply Loctite 242 to all screws and bolt.
O R T H O T I C S
110 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
ZERO
G
L O W E R E X T R E M I T Y O R T H O T I C S
ZGA-100ZERO G AFO BOOT
The Zero G AFO indicated for the following conditions:• Charcot foot (neuropathic joint disease)• Arthritis, including Gout/Gouty arthritis• Osteochondritis Dissecans• Spina Bifida• Foot drop and/or ankle instability• Heel and/or metatarsal ulceration• Diabetic foot ulcers• Fractures of the distal tibia, talus, or calcaneous• Pre or post surgical intervention of the mid and hind foot• Crushing injuries of the mid and hind foot• Any condition in which unweighting of the foot or ankle is needed
Suggested L-Codes: • L1971 – AFO ZeroGAFO Pre-Fab (Base Code) • L2220 X 2 – Double Action Ankle Joint • L2265 – Long Tongue Stirrup
Zero G
111www.stngco.com
ZERO G
P/N Size Calf Circumference
ZGAL-100S Small 9.5 - 12.5in
ZGAL-100M Medium 13 - 15.5in
ZGAL-100L Large 16 - 19in
ZGAL-100XL X Large 19 - 22.5in
P/N Description Length
ZGA-100S Small 8.19 - 9.02in
ZGA-100M Medium 9.17 - 9.84in
ZGA-100L Large 10.04 - 10.75in
ZGA-100XL X Large 10.91 - 11.75in
ZGA-100XXL XX Large 11.77 - 12.25in
ZERO G AFO BOOT SIZING
CALF LACER• Strap with easily adjustable Velcro closure system for ease of donning / doffing the brace• Anterior tongue protection to complete the 360 degree lacer• One SmartKnit® seam-free sock for soft interface• Infinitely adjustable leather lacer corset on the brace structure with Velcro fasteners
AFO BASE• Half inch (½ in) donning pad to ensure a repeatable off loading process• Double-action ankle joints for assist / resist adjustment• One inch (1in) memory foam foot pad to cushion any pressure applied to plantar surface of the foot• Footplate pad made from ¼ in Plastazote• Adjustable, padded foot cover encases and protects the foot• Universal for left or right fitting
SIZING:The Zero G AFO comes in two compo-nents, the Calf Lacer and the AFO Base. Measurements of the calf circumference and the foot length are taken to determine proper sizing. The Lacer and AFO Base sizes of the Zero G AFO can be interchanged for proper fit.
112 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
LSO
S P I N A L O R T H O T I C S
LS-627BALBOA COMFORT LSO BRACE
LS-627A Standard – S thru XL (25” – 45” circumference, 9 1/2” height back panel) LS-627B Maximum – 2XL thru 4XL (45” – 60” circumference, 9 1/2” height back panel)
The NEW Balboa Comfort LSO is a universal lumbar orthosis which provides sagittal control from an anterior and posterior rigid panel. The Balboa Comfort LSO has a flexible pulley system which allows for maximum comfort and fit. A dual handle pulley system allows for the patient to receive equalized compression throughout the brace.
Indications include but are not limited to:• Low back pain, sprains and strains, and scoliosis• Lumbar disc displacement, disc degeneration, disc herniation, and compression fractures• Post-operative laminectomy, post-operative discectomy, IDET procedure, spondylolisthesis, post-operative fusion, spinal stenosis, and osteoporosis
LSO
• Removable rigid posterior panel extends from L-1 to below L-5 vertebra offering equalized compression and support• Lightweight low profile rigid anterior panel is built into the belt and provides additional abdominal comfort and support• Flexible pulley system contours and conforms to the patient’s body type which allows the patient to adjust easily for desired comfort when standing or sitting• Easy to use dual handle pulley helps provide equal compression as well as aids patients with arthritic hand issues and muscle weakness
The Balboa Comfort LSO Brace provides superior 5 : 1 compression and stabilization from L-1 to below L-5 vertebra
* Medical advice should be sought on the appropri-ateness and the condition under which any given spinal bracing system should be utilized.
TIPS:• Extend or pull the brace completely out prior to application.
• Initially align each pulley handle to the side of the brace prior to fitting.
• Adjust tension for sitting or standing.
• Hand wash in warm water, rinse well, towel and air dry completely.
113www.stngco.com
LSOLS-631CAPRI COMFORT LSO BRACE
LS-631A Standard – S thru XL (25” – 45” circumference, 14 1/2” height back panel) LS-631B Maximum – 2XL thru 4XL (45” – 60” circumference, 16 1/4” height back panel)
The NEW Capri Comfort LSO, pre and post operative management bracing system allows for a progression of rehabilitation adaptability with anterior and posterior panels. The Capri Comfort LSO treats a variety of indications from acute and chronic pain to post operative patients, thus assisting the patient through a continuum of care.
Indications include but are not limited to:• Burst fracture• Facet syndrome• Chronic and mechanical low back pain• Post-operative stabilization protocol following: Laminotomy, foraminotomy, IDET procedures, anterior laparoscopic fusion, posterior lateral fusion, and multi-level decompression
LSO
• Dual independent mechanical advantage pulley system provides precise upper and lower compression levels for maximum comfort, control, support, stability, and pain relief• Removable contoured padded posterior panel provides maximum comfort and support when sitting or standing• Low profile anterior panel is built into the belt for greater patient comfort and compliance• Easy to use dual independent mechanical advantage pulley handles help with patients who have trouble with arthritic hand issues and muscle weakness
The Capri Comfort LSO Brace provides superior 5 : 1 compression and stabilization from the sacroccoccygeal junction to T-9 vertebra
* Medical advice should be sought on the appropri-ateness and the condition under which any given spinal bracing system should be utilized.
TIPS:• Extend or pull the brace completely out prior to application.
• Initially align each pulley handle to the side of the brace prior to fitting.
• Adjust tension for sitting or standing.
• Hand wash in warm water, rinse well, towel and air dry completely.
114 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
LSO
TIPS:• Extend or pull the brace completely out prior to application.
• Initially align each pulley handle to the side of the brace prior to fitting.
• Adjust tension for sitting or standing.
• Hand wash in warm water, rinse well, towel and air dry completely.
S P I N A L O R T H O T I C S
LS-637AVALON CONTOUR LSO BRACE
LS-637A Standard – S thru XL (25” – 45” circumference, 14 1/2” height back panel) LS-637B Maximum – 2XL thru 4XL (45” – 60” circumference, 16 1/4” height back panel)
The NEW Avalon Contour LSO, pre and post operative management bracing system allows for a progression of rehabilitation adaptability with anterior and removable lateral and posterior panels. The Avalon Contour LSO treats a variety of indications from acute and chronic pain to post operative patients, thus assisting the patient through a continuum of care.
Indications include but are not limited to:• Lumbar sacral mechanical back pain• Spinal stenosis• Spondylolisthesis• Degenerative and bulging discs• Herniated/bulging discs• Facet syndrome• Post-operative stabilization protocol following: Laminotomy, foraminotomy, IDET procedures, anterior laparoscopic fusion, posterior lateral fusion, and multi-level decompression
• Dual independent mechanical advantage pulley system provides precise upper and lower compression levels for maximum comfort, control, support, stability, and pain relief• Removable contoured padded posterior and lateral panels provides maximum comfort and support when sitting or standing• Low profile anterior panel is built into the belt for greater patient comfort and compliance• Easy to use dual independent mechanical advantage pulley handles help with patients who have trouble with arthritic hand issues and muscle weakness
The Avalon Contour LSO Brace provides superior 5 : 1 compression and stabilization from the sacroccoccygeal junction to T-9 vertebra
* Medical advice should be sought on the appropri-ateness and the condition under which any given spinal bracing system should be utilized.
LSO
115www.stngco.com
LSOLSO BRACE FITTING INSTRUCTIONS
To Shorten the Length of the Nylon Cord on the Pulley Handle:
STEP 2 - Cut to Size
STEP 3 - Fit to Size
Lift sleeve and remove exten-sion panels to adjust to appro-priate size.
Initially align each pulley handle to the side of the brace prior to fitting. Adjust tension for sitting or standing.
Place the handles on the fabric for a secure fit.
Detach the cord from the front clip
Wrap the cord around the 360 degree side groove clockwise
Reattach the cord to the front clip
Pull each side pulley at the same time out and away to desired compression and support.
Center back panel on the spine with the pointed part of the posterior panel up.
Wrap the left side to the front, positioning the front panel. Then wrap right side on top of the left panel to close and attach in front.
Cut to desired length with scis-sors (prior to cutting, refer to sizing chart for proper length).
If size adjustment is minimal, simply fold the extension panel to desired length.
Once adjustment is made, (cut or folded) simply lift the sleeve and attach the extension to Velcro. Press down to secure.
S25-30inches
S25-30inches
M30-35inches
M30-35inches
L35-40inches
L35-40inches
XL40-45inches
XL40-45inches
2XL45-50inches
2XL45-50inches
3XL50-55inches
3XL50-55inches
4XL55-60inches
4XL55-60inches
116 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
TLSO
S P I N A L O R T H O T I C S
TLS-464TITAN TLSO BRACE
Universal Sizing Options – Dual Handle Pulley System S thru 4XL (25” – 60” circumference) Item # TLSO
Features and Benefits: • Dual Pulley System that offers superior compression that conforms to the patient’s anatomy• Soft and padded shoulder straps • Tool free linear thoracic adjustment with articulating sternal pads• Posterior spinal relief cutout extending from inferior of scapula to sacrococcygeal junction • Anterior extends from symphysis pubis to the sternal notch • Restricts gross trunk motion in sagittal, coronal and transverse planes• Removable anterior panel• Molded side stabilizing panels and closures provide for lateral strength• Universal sizing
Indications: • Acute pain relief by thoracic postural extension alignment• Compression fractures of the thoracic spine• Early onset through variable stages of osteoporosis• As an adjunct to pre and post surgical protocols• Thoracic mechanical back pain• Kyphosis
The Titan TLSO provides superior triplanarmotion control and offers superior abdominal compression and stabilization from T9 to S1.
Anterior View
Posterior View
TLSO
TIPS:• Extend or pull the brace completely out prior to application.
• Initially align each pulley handle to the side of the brace prior to fitting.
• Adjust tension for sitting or standing.
• Hand wash in warm water, rinse well, towel and air dry completely.
* Medical advice should be sought on the appropri-ateness and the condition under which any given spinal bracing system should be utilized.
Contoured Padded Posterior Panel provides unsurpassed comfort and support
117www.stngco.com
TLSO
TLSO BRACE FITTING INSTRUCTIONS
To Shorten the Length of the Nylon Cord on the Pulley Handle:
STEP 2 - Cut to Size
STEP 1 - Locate Size
STEP 3 - Fit to Size
Measure patient around widest part of waist.
Place the handles on the fabric for a secure fit.
Detach the cord from the front clip
Wrap the cord around the 360 degree side groove clockwise
Reattach the cord to the front clip
Pull each side pulley at the same time out and away to desired compression and support.
After determining waist size, (refer to sizing chart for proper length) Cut to desired length with scissors.
Once adjustment is made, simply lift the sleeve and attach the extension to Velcro. Press down to secure.
Have your patient hold the an-terior panel on their abdomen to size sternal pad
Unscrew locking mechanism lifting up to a comfortable posi-tion. Once set, screw locking mechanism until tight.
Then take back panel and align to back and clip each shoulder strap into place. Pull the straps tight.
Wrap the left side to the front, positioning the front panel. Then wrap right side on top of the left panel to close and attach in front.
S25-30inches
S25-30inches
M30-35inches
M30-35inches
L35-40inches
L35-40inches
XL40-45inches
XL40-45inches
2XL45-50inches
2XL45-50inches
3XL50-55inches
3XL50-55inches
4XL55-60inches
4XL55-60inches
118 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
TLSO
S P I N A L O R T H O T I C S
CCH-100CRISS-CROSS HYPEREXTENSION SPINAL ORTHOSIS
Criss-Cross Hyperextension Spinal Orthosis TLSO reduces risk of additional injury from osteoporosis and compression fractures. This orthosis is designed for patients requiring effective triplanar control. The Criss-Cross orthosis also features a padded posterior pad with a hook and loop closure system and a slim line thoracic pad for additional comfort and patient compliance.
The Criss-Cross thoracic spine support is manufactured with a light weight polished aluminum frame with velcro closures• Adjustable for increased height/length from 12” – 18” as well as medial/lateral positioning• Anterior extension support for control of mid thoracic and lumbar spine utilizing the three point system.
Features & Benefits:• Rigid light weight aluminum anterior and lateral frame can be individually adjusted for height and width • Articulating pubic and sternal pads for increased patient comfort and compliance• Padded posterior and anterior support • Easy to use hook and loop closure system
Indications:• Thoracic mechanical back pain• Limits spinal flexion while restricting movement in the sagittal, coronal and transverse planes.• Control of unintended thoracic flexion posture• Promotion of spinal alignment to aid pain in reduction associated with osteoarthritis and other spinal anomalies• Spontaneous or Traumatic compression• Early onset through variable stages of: - Osteoporosis - Thoracolumbar injury - Degenerative disc - Compression fractures - Kyphosis
P/N Description
CCH-100 Criss-Cross Hyperextension Spinal Orthosis
To maximize the vertical distance between the pubis and the sternal pad reposition the screws as shown in Figure 1.
To maximize the width at the lateral frame reposition the screws as shown in Figure 2.
Measure the distance between sternal notch and symphysis pubis and subtract 2”. See Figure 3.
SIZING CHARTOne size fits most: This TLSO brace is adjustable in length from 12” - 18”
TLSO
Figure 1
Figure 2
Figure 3
119www.stngco.com
SHOULDER ABDUCTION ORTHOSIS
U P P E R E X T R E M I T Y O R T H O T I C S
HF-100HI-FIVE PEDIATRIC SHOULDER ABDUCTION ORTHOSIS
Features:The Hi-Five was developed to easily manage positioning of the shoulder joint complex. The Hi-Five orthosis can be easily and infinitely adjusted in abduction, adduction, external/internal rotation as well as flexion and extension of the shoulder. The orthosis position is simply adjusted throughout the therapy/rehab process. The orthosis is constructed with universal positioning for left or right application.
Indications for Uses:• Erb’s palsy• Brachial plexus injury• Pre and post surgical management• Night time positioning orthosis• Post muscle release and muscle transfer of the shoulder
Tri-planar control of the shoulder complex with infinite adjustable range of motion in:• Abduction/adduction• Internal/external rotation• Flexion/extension
Warranty: 90 days
P/N Description
HF-100I Hi-Five Shoulder Abduction Orthosis, Infant
HF-100S Hi-Five Shoulder Abduction Orthosis, Small
HF-100L Hi-Five Shoulder Abduction Orthosis, Large
① Flexion/extension position-ing control of the elbow joint
② Height and length adjustability for easily adjustable lengths:
- Anterior/posterior adjustability at pelvic section
- Medial/lateral adjustability at pelvic section
- Universal left or right positioning
- Shoulder joint positioning
- Humeral cuff positioning
- Forearm positioning
- Wrist positioning
④ Medial/lateral adjustability at pelvic section
⑤ Universal left or right positioning
③ Height and length adjustability
ADJUSTMENT
Shoulder Abduction Orthosis
P/N Size Waist M/L
HF-100I Infent 4in - 7in
HF-100S Small 6in - 9in
HF-100S Large 8in - 11in
Size Chart
120 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
SHOU
LDER
ABD
UCTI
ON O
RTHO
SIS HSJ-100
PEDIATRIC HI-FIVE SHOULDER JOINT
The Hi-Five Shoulder Joint unit is machined utilizing high quality stainless steel. This heavy duty design ensures the shoulder joint will remain at the desired lock out position. The stainless steel locking teeth at the midsection ensures complete lockout in desired adduction/abduction position. The proximal and distal uprights are produced utilizing round bar construction providing for infinite height adjustment, internal/external rotation and flexion/extension. Stainless steel attachment clamps ensure lockout positions for height, rotation, and flexion/extension are durable and fixed. This joint is offered in two sizes and can be used for right or left applications.
Warranty: 90 days
P/N Description
HSJ-100I Infant Hi-Five Shoulder Joint
HSJ-100P Pediatric Hi-Five Shoulder Joint
Shoulder Joint
U P P E R E X T R E M I T Y O R T H O T I C S
122 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
SHOU
LDER
JOI
NT
A F O A N K L E J O I N T S
RFD-100 & RFS-100RIDGEFLEX ANKLE JOINT
ISOTROPIC Fiber Elastomer Technology
ST&G utilizes Prepalon® with its IFET in creating RidgeFlex Ankle Joint which provides optimal balance between rigidity and flexibilty.
Features:• Dynamic rotational control• Dynamic dampening provides better rangle of motional control• Easy fabrication• Durable composite material created from Prepalon®
• Comes in two versions – Dorsi Assist – Standard
P/N Description
RFD-100 Rigid Flex Ankle Joint, Dorsi Assist
P/N Description
RFS-100 Rigid Flex Ankle Joint, Standard
Ankle Joint
123www.stngco.com
ANKLE JOINT
A F O A N K L E J O I N T S
MAJ-100MERIDIAN ANKLE JOINT
The Meridian ankle joint is a durable stainless steel ankle joint. Its sleek and low profile design allows for a light weight and durable ankle joint, which can be set in infinite degrees of motion, without the inconvenience of changing parts. This joint allows precise degree fine tuning and has the ability to lock in any degree of plantar/dorsi-flexion. Some uses for the Meridian Ankle Joint include articulating AFO’s, contracture managment, solid ankle AFO’s, posterior entry AFO’s, tone reducing AFO’s and floor reaction AFO’s.
Suggested L-Codes: • L2200 (Limited motion ankle joint x 2)
Warranty: 6 months
VJ-300 & VJM-300AVARIABLE, VARUS, VALGUS (V-3) CORRECTION JOINT
The V-3 joint has some significiant benefits and features which include; ease of fabrication with the utilization of the polyurethane fabrication molding dummies, allows for complete vertical alignment in the coronal plane, simple varus/valgus correction adjustability, a self-aligning midsection that provides a smooth free motion articulation at any angle, superior rotation stability of AFO. All of these features provide for an easily adjustable ankle joint system during the fitting process. In addition, interlocking proximal grooves ensure secure joint placement within plastic. The V-3 is a durable and light weight design machined from high quality stainless steel. This joint is also extremely cost effective and saves fabrication and fitting time.
Warranty: 6 months
Ankle Joint
P/N Description Unit
MAJ-100P Pediatric Meridian Ankle Joint Pair
MAJ-100A Adult Meridian Ankle Joint Pair
MAJ-100HD HD Meridian Ankle Joint Pair
MAJ-KIT-P Fabrication Kit, Peiatric Kit
MAJ-KIT-A Fabrication Kit, Adult Kit
MAJ-KIT-HD Fabrication Kit, Heavy Duty Kit
P/N Description Unit
VJ-300 Variable Joint, Adult Pair
VJM-300A Variable Joint Fabrication Molding Dummy Each
Ankle Joint
Fabrication Kit
V-3 Correction Joint
Fabrication Molding Dummy
124 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
ANKL
E JO
INT DYA-100
DYNA-LOCK ANKLE JOINT
The Dyna-Lock Dynamic Ankle Joint is a unique design incorporating in patent pending one way pressure activated locking mechanism. This mechanism allows in patient to easily don the orthosis while positioned in plantar flexion. Once activator strap is fastened the ankle joint will lock into any desired dorsi-flexion position, while not allowing the patient to go back into plantar flexion. The joint will allow for more dorsi-flexion, but will not allow additional plantar flexion.
This ankle joint allows dynamic management of plantar flexion contractures in weight bearing and non-weight bearing devices. It also allows progressive management of plantar flexion contractures throughout therapy/rehab process, accomodating progressive dorsi-flexion.
Indications & Uses:• Post CVA• Spina-Bifida• CMT• Leg calf perthese• Post surgical procedures of foot ankle• Any time management of plantar flexion contracture is necessary
Features:• One way pressure activated locking mechanism• Joint can be in weight bearing and non-weight bearing device• Virtually accomodates any plantar flexion contracture no matter how severe• Limit allowable plantar or dorsi position range when incorporating Meridian ankle joint• Ease of donning and doffing
Warranty: 6 months
Ankle Joint
P/N Description
DYA-100A Dyna-Lock Ankle Joint
A F O A N K L E J O I N T S
125www.stngco.com
ANKLE JOINT
DYA-100VADYNA-LOCK ANKLE JOINT WITH V-3
Features:• Ease of fabrication with molding dummy system and self-aligning midsection• Self-aligning midsection providing smooth free motion articulation at any angle• Variable, varus and valgus correction adjustability• Durable stainless steel construction• Free motion AFO system when Dyna-Lock is not engaged
Warranty: 6 months
DYA-100MADYNA-LOCK ANKLE JOINT WITH MERIDIAN
Features:• Ability to limit allowable plantar or dorsi position range• Greater torsional stability• High strength stainless steel construction• AFO system with adjustable R.O.M when Dyna-Lock is not engaged
Warranty: 6 months
P/N Description
DYA-100VA Dyna-Lock Ankle Joint with V-3
P/N Description
DYA-100MA Dyna-Lock Ankle Joint with Meridian
Ankle Joint
126 TO ORDER CALL: 714-524-0663 / FAX: 714-364-8113
ANKL
E JO
INT DJ II-100
DREAM JOINT II
Features:• Sleek and low profile design• Plantar flexion resistance• Dorsi-flexion assistance• Patented one way clutch design• Adjustable torque resistance• Ease of fabrication• Light weight• Durable stainless steel
Indications & Uses:• CVA• Peroneal nerve palsy• Spinal cord injury• Flail limb• Neurologicmotor disabilities• Weak dorsi-flexors• General sagittal plane weakness of the ankle
Warranty: 6 months
P/N Description Unit
DJ II-100S Dream Joint II, Small = 55kg / 121 lbs Pair
DJ II-100L Dream Joint II, Large = 100kg / 220 lbs Pair
Ankle Joint
Plantar Flexion Resistance
Adjustable TorqueResistance
Dorsi Flexion Assist
A F O A N K L E J O I N T S
“ They did not know it was impossible, so they did it”
— MARK TWAIN
2691 Saturn StreetBrea, California 92821, USA
T (1) 714-524-0663 F (1) 714-364-8113E [email protected]
stngco.com
I N N O V A T I O N W I T H O U T L I M I T S