Advanced Technology, Inc. • Made in USA • Lifetime Warranty • No Gunsmithingwww.ATIgunstocks.com • 102 Fieldview Dr. • Versailles, KY 40383 • PH: 859-873-9877 • FAX: 859-873-6229 IS-ARA2400-021808

MAKE SURE YOUR RIFLE CHAMBER IS EMPTY AND MAGAZINE HAS BEEN REMOVED FROM THE ACTION.

1. Seeexplodedviewonoppositesideforpartdescription,screwsize,anditem

number.

2. InstallCollapsibleButtstockwithCheekrest:

a. Pulldown onlatch lever(#7), fullstroke, andpush collapsible buttstock (#2)onto buffertube. Picture #1 b. Releaselatch leverto positionas required.c. Buttstock position canbe changed bypulling uponlatch

lever(#7)andslidingcollapsiblebuttstocktonewposition.

Picture #2

ToAdjustCheekRest 1. Loosenfour #6-32x3/8 screws(#14), slidecheekrest (#13)upto correct

position,retighten fourscrews(#14).

Picture #3 2. Totaladjustmentis3/8inch with1/8inchincrements.

3. InstallPistolGrip: 1. Removeoriginalpistolgripbyremoving screwfrombottomofgrip. CAUTION:Detentspringmayfallout

duringremovalprocess. 2. Removespringfromoriginalgripand

placeintoholeontopofnewgrip(#1). 3. Installnewgripusingoriginalscrew.

AR-15 STRIKEFORCECOLLAPSIBLE STOCK AND GRIP

INSTALLATION INSTRUCTIONSPART# ARA2400

Fits: All AR-15 and Variants

Congratulations on purchasing one of Advanced Technology, Inc.’s STRIKEFORCE components. There are several combinations and additional components available. Check with your local retailer for more new, exciting accessories.

INSTALLATION OF COLLAPSIBLE BUTTSTOCK WITH CHEEK REST

Picture #1

Picture #2

Picture #3

IMPORTANT: Check safety lever switch to confirm spring has been installed correctly.

INSTALLATION OF PISTOL GRIP

CHEEK REST ADJUSTMENT

AR-15 STRIKEFORCECOLLAPSIBLE STOCK AND GRIP

INSTALLATION INSTRUCTIONSPART# ARA2400

Fits: All AR-15 and Variants