OWN DESIGNED
C
ASE STUDY
PRESENTED BY : KHUSHBOO KHUNTWAL B. Sc. FT. 1ST YEAR DIPLOMA FASHION TECHNOLOGY
DESCRIPTION OF GARMENT FABRICS NOTIONS
MEASUREMENTS :
FABRIC NEEDED:-
Dezyne E’Cole College,Ajmer Submitted By :-
Khushboo Khuntwal 1st Year Diploma FT
SUITABLE:-
UNSUITABLE:-
METRIC IMPERIAL
Dress length 38”
waist length 14”
Shoulder Width 4”
Sleeve Length 6”
BODY MEASUREMENT
GARMENT MEASUREMENT
ROUND CHESTROUND WAISTROUND HIP
34”261/2”
36”
CHEST 36”
WAIST 31”
HIP 39”
SMALL MEDIUM LARGE SMALL MEDIUM LARGE
CASE STUDY : 2 14 Pieces
Cotton Polyester, Cotton,soft Denim Blended fabric
Silk ,Nylon ,Hosiery. Organdy.
METRIC IMPERIAL
34” 38”
29” 331/2”37” 401/2”
4” 4.2”37” 39
13.4” 14”
.4”
6” 6”
32” 36”24” 28”35” 38”
.
8060
87.5
8572.5
92.510
92.533.515
8566.1/4
90
90
90
77.597.51095
35 35
7095
9583.3/4
101.1/410.598.5
Topper and skirt, Topper with attached puff sleeve and v shape neckline, basic a line flare skirt
15 15
Rubber Elastic 1” wide
190.75 76.3”
DETAIL OF DRESS
In this case study I have given the details of the design ,and haveincluded the following details :-
Flat Design :- An hour glass silhouette. the top is a dartless basic bodice with short sleeves having fullness at cap and hem. The neckline is v-shaped and the hemline is straight. The skirt is a basic flared skirt with a 2’’band
Measurements :- The measurement chart for a medium (34’’) size, female. Seam allowances have also been given.
Notions :- Zips, buttons, threads, and other requirements are given in details.
Drafting Patterns:- 14 patterns are required for drafting. They are in 1/8’’ Scale.
Estimation Sheet:- 76.3’’ of fabric is required for the construction of the garment.
Fabric :- 100% Tubulized cotton of 45’’ yardage has been used.
Color :- Cream color is used in the base and has beige stripes outlined with red.
Seams :- Plain and Top seam has been used.
Design Variation:- Variation in seams, fabric, color, and design that can be given
INNOVATIVE DRESS
flare skirt
skirt belt
a line bottom
puff sleeve
v shape neck line with tuxedo collar
puff with ruffled bendsleeve
back round neck line
The variations that could be made in the design are
Fabric :- Which can be used : Cotton blends. Voile, Jorgettes, Chiffons soft denims, Which should be avoided: Wool, Brocades, Tusser silk, Linen, Woolen blends,
Seams :- Double top seam, French seam, Abutted seam, Welt, and Closed slot seam.
Color :- A wide range of colored fabrics can be used. All Whites, muted,
the skirt we can use horizontal, vertical or diagonal stripes
checks :- even or uneven.
Design Variation:
Blended fabrics, self woven fabrics
pastels, and pale colors can be used for the top’ Whereas dark shades and tones of different colors can be used.
Prints :- Floral and geometrical prints can be used in the top. In
DEZYNE E’ COLE
GARMENT CONSTRCATION
CASE STUDY NUMBER - 2
STYLE NOUMBER - 2 COLOUR – WHITE & RAD STRIP WITH CREAM
FABRIC TYPE – COTTON FABRIC YARDEGE OF FABRIC – 36”
PRODUCT TYPE – WOMENS WEAR SAMPEL SIZE – 34” MEDIAM SIZE
DESIGN OF GARMENT FRONT PART
DESIGN OF GARMENT BACK PART
MEASUREMENTS REQUIRED
SEAM ALLOUNCE
TOPPRE FRONT & BACK
SKIRT BELT ½”
SKIRT BOTTOM FOLDING 1”
DRESS LENGTH 38” SHOULDER ½”
FRONT LENGTH 171/2” NECK LINE ¼”
BACK LENGTH 171/2” ARM HOLE ¼”
CENTER FRONT LENGTH 14½” SIDE SEAM ½”
CENTER BACK TO PRINCESS LINE
2 5/8 TOPEER BOTTOM FOLDING 1”
CENTER FRONT TO PRINCESS LINE
2 ¾” SLEEVE HIGHT ½”
BUST 34” SLEEVE BEND ½”
WAIST 26” REMARKS ACROSS FRONT 15”
ACROSS BACK 171/4” SHOULDER WIDTH 4” SEAMS SINGLE TOP, WELT
NECK DEPTH FRONT
7”
SEAM.
NECK DEPTH BACK
3” HEAM LINE FLAERD HEM
APEX MEASURMENT
3 ¾” EDGE FINISHING
SHOULDER BLEAD
7” NECK PIPING
SHULDER TO WAIST LINE 14¾” SLEEVE BEND
WELT SEAM
FRONT WAIST LINE
13½” TOPPER EDGE SINGLE TOP SEAM
BACK WAIST LINE
12”
SKIRT HEM
PICO
SKIRT BELT WELT SEAM
SLEEVE FRONT & BACK
NEEDSLE NO. 16
NEEDLE SIZE SLEEVE LENGTH 6” PUFF FOR HEM & CAP 4” THREAD COLOUR WHITE
CAP HIGHT 6 3/8” THREAD NO. 081
BICEP CURCUMFERENCE 12 ½” THREAD MATERIAL COTTON
SLEEVE BAND
2” STITCH PER INCH 8
SKIRT FRONT & BACK PART
PIN DRESS MAKER
SIZE 25MM.&L.30MM
SKIRT LENGTH
21”
HIP LEINGTH 7”
FRONT DART LENGTH 3 ½”
BACK DART LENGTH 5 ½”
SPACE OF BOTH SIDE DART FRONT
5”
SPACE OF BOTH SIDE DART BACK
4.7
FRONT &BACK HIP LINE 9 3/8”
WAIST BELT WIDTH 1 ½”
FRONT WAIST LINE 6 ¾”
BACK WAIST LINE 6”
C. F. PRINCESS LINE 2 ¾”
C.B. PRINCESS LINE 2 5/8”
TRIMS ELASTIC WHITE
WIDTH 1”
SIZE 16” LENGTH
TYPE OF MATIRIYEL RUBBER
2D PATTERN OF DRESS
{NOTE:-TOP NECK, SLEEVE CURVE, ARMHOLE, AND SKIRT DARTS SEAM ARE USED 1/4”SEAMAND SHOULDER, HEM, SIDE SEAM, BELT, BOTH SECTION OF SLEEVE ARE USED 1/2”SEAM.}
UPPER AND LOWER PART
MARKER MAKING OF dress
WIDTH OF TABLE 57”
LE
NG
TH
OF
TA
BLE
15
6”
SMALL ,MEDIUM AND LARGE PATTERNS ARE LAID ON A 57” WIDE TABLE THIS IS USED FOR MARKER MAKING . THE TOTAL LENGTH REQUIRED IS 156”.
LAYOUT OF TOP AND SKIRT
WIDTH OF FABRIC 45”
LE
NG
TH
OF
FA
BR
IC 7
6.3
”
ESTIMATION OF FABRIC UPPER & LOWER PART
LENGTH OF FABRIC FOR TOP AND SKIRT
TOTAL LENGTH OF FABRIC 76.3” METER{190.75 C. M. )
CREAM BASE COLOUR & BEIGE WITH RED OUTLINE FABRIC LENGTH IS 76.3” {190.75 C. M.}
FRONT PART
BACK PART
SPECIFICATION SHEET
neck depth 7”
neck finished with piping 1”& attached with single top seam
sleeve bend 1” wide & attached with welt seam
topper hem finished with single top seam
finished with elastic 1” wide
flare hemline finished with single top seam
front dart length 3 1/2”
right & left side dart width 5”
puff sleeve
neck depth 3”
neck finished with piping 1”& attached with single top seam
sleeve bend 1” wide & attached with welt seam
topper hem finished with single top seam
finished with elastic 1” wide
flare hemline finished with single top seam
back dart length 5 1/2”
right & left side dart width 4.12”
puff sleeve
PRODUCT SPECIFICATION
A LINE FLARE HEM
SINGLE TOP SEAM{.5 PRESER FOOT}
COTTON POLYESTER
WAIST BELT WITH ELASTIC
STRIPED FABRIC
SINGLE TOP SEAM{.5 PRESER FOOT}
STRIAGHT HEM
WELT SEAM
V SHAPE NECK LINE FINESSED WITH PIPING
ROUND NECK LINE FINESSED WITH PIPING
COTTON FABRIC
PUFF SLEEVE