Karl SPECHT
Maintenance Organisation Oversight Section Manager Flight Standards Directorate
2018(D)54513 ksp/gfe/FSl Cologne, 06.11.2018
The Quality Manager
AIRPLANE TECHNICS LLC 191, MONK GABRIEL SALOSI AVE. 0144 TBILISI GEORGIA
Subject: Initial issue of EASA Part-145 approval certificate
Reference: FS 04/Rev 0/EASA.145.0828
Enclosure: EASA Part-145 approval certificate
Dear Sir or Madam,
Following a positive recommendation for a Part-145 approval from null for:
Airplane Technics LLC
The European Aviation Safety Agency hereby encloses your EASA Part-145 approval certificate reference:
EASA.145.0828
Karl SPECHT
Cc: DGAC-FR
Certification and Approval Support Department, EASA
4 4 * * * * * * t 4
Postal address: Postfach 10 12 53, 50452 Cologne, Germany Visiting Address: Konrad-Adenauer-Ufer 3 50668 Cologne, Germany
An agency of the European Union
Tel.: +49 221 8999 4151 E-mail: [email protected] Web: www.easa.europa.eu ISO 9001 Certified TE.GEN.00101-005
»»»
Page 1 of 2
MAINTENANCE ORGANISATION APPROVAL CERTIFICATE
-- ---
Reference: EASA.145.0828
Pursuant to Regulation (EC) N° 216/2008 of the European Parliament and of the Council and to Commission Regulation (EU) N1321/2014 for the time being in force and subject to the conditions specified below, the Agency hereby certifies:
AIRPLANE TECHNICS LLC 191, MONK GABRIEL SALOSI AVE.
0144 TBILISI GEORGIA
as a maintenance organisation in compliance with Section A of Annex II (Part-145) of Regulation (EU) N 1321/2014, approved to maintain the products, parts and appliances listed in the attached approval schedule and issue related certificates of release to service using the above references.
CONDITIONS:
1. This approval is limited to that specified in the scope of work section of the approved maintenance organisation exposition as referred to in Section A of Annex II (Part-145), and
2. This approval requires compliance with the procedures specified in the approved maintenance organisation exposition, and
3. This approval is valid whilst the approved maintenance organisation remains in compliance with Annex II (Part-145) of Regulation (EU) N° 1321/2014.
4. Subject to compliance with the foregoing conditions, this approval shall remain valid for an unlimited duration unless the approval has previously been surrendered, superseded, suspended or revoked.
Date of original issue: 06 Nov 2018
Date of this ran: -- .Zlt For the Agency
Revision N°: Initial
EASA Form 3- 145 Issue 3
Page 2 of 2
MAINTENANCE ORGANISATION APPROVAL SCHEDULE
Reference: EASA.145.0828 Organisation: AIRPLANE TECHNICS LLC
191, MONK GABRIEL SALOSI AVE. 0144 TBILISI GEORGIA
CLASS RATING LIMITATION BASE LINE AIRCRAFT Al Aeroplanes above Airbus A318/A319/A320/ A321 NO YES
5700kg Boeing 737-300/400/500 NO YES Boeing 737-600/700/800/900 NO YES
CLASS RATING LIMITATION COMPONENTS C20 Structural Components in accordance with the OTHER THAN Capability List defined in the COMPLETE Company MOE. ENGINES OR APUs
This approval schedule is limited to those products, parts and appliances and to the activities specified in the scope of work section of the approved maintenance organisation exposition,
Maintenance Organisation Exposition Reference: Part 145 MOE (ATL)
Date of original issue: 01 Mar 2018
n approved: 01 Mar 2018
Signed:
Issue N: 01 Revision N°: 00
For the Agency
EASA Form 3- 145 Issue 3