DSR 2-600 / 1800 XOZFlexible face grinder for connecting rods
DSR 2-600 / 1800 XOZ
A side face grinding machine with two vertically installed grinding spindles. These
build in motor grinding spindles have variable r. p.m. and are mounted onto two
cross slides. Each of them can move individually in vertical and horizontal direc-
tion. With help of the Ø 600 mm grinding wheels and the cross slide movements,
the machine can be set to the geometry of the work pieces. This machine is mainly
used to grind the small and the big end of connecting rods, no matter if these are
for passenger cars or for truck engines. For example, the small end and big end of
coplanar or non coplanar connecting rods of commercial and passenger vehicles
can be machined on both sides and the trapezium as well.
Process
The parts move by means of a rotary index table which has a diameter of 1.800 mm,
by 180° into the grinding area. The connecting rods are ground while they are clamped
in fixtures. For this purpose 4/8 jigs for two parts each are mounted on the rotary index
table. In step sequence two jigs are in the grinding area, to grind the first side of the
connecting rods and in the other jig the second side is machined simultaneously.
Each of the two grinding wheels will grind small end and big end of the connecting rod.
Automation
During the grinding process the other sets of fixtures are outside the grinding area for
loading, off loading and turnover of the work pieces. This can be done by means of a
robot or gantry loader or manually.
After a second 180° rotation of the index table the next sequence will start.
Index table with fixtures
Turn over station
2 3 DSR 2 600 / 1800 X OZ
Technical data
Round table
Z-axis
X-axis
Grinding spindle power
Grinding wheel
Bearing
Spindle r.p.m
Cutting speed
Rapid traverse
Grinding tools: corundum, CBN, diamond
Ø
100% ED
Ø
Ø
X / Z
mm
mm
mm
kW
mm
mm
min-1
m/s
m/min
1.800
300
1.100 – 2.330
17 – 38
457 / 600
100 / 120
max. 3.000
max. 63
60 / 15
Benefit of the
DSR 2-600 / 1800 XOZ
Very flexible machine concept
with SIEMENS 840 D control
which allows small batch pro-
duction as well.
1
3
Measuring of connecting rodsl3
Robot loading4
2
4
1
2
DISKUS WERKE Schleiftechnik GmbHJohannes-Gutenberg-Straße 1D-63128 DietzenbachGermany
www.dvs-technology.com
Tel +49 (0) 6074 48402 - 0Fax +49 (0) 6074 48402 - 36Mail [email protected]
Mitglieder der DVS TECHNOLOGY GROUPMembers of the DVS TECHNOLOGY GROUP
DVS MACHINE TOOLS & AUTOMATION
DVS TOOLS & COMPONENTS
DVS PRODUCTION
DVS INTERNATIONAL SALES & SERVICE
BUDERUS Schleiftechnik GmbH | www.buderus-schleiftechnik.deInnenrundschleifen – Außenrundschleifen – Gewindeschleifen – HartdrehenI.D. grinding – O.D. grinding – Thread grinding – Hard turning
DISKUS WERKE Schleiftechnik GmbH | www.diskus-werke.dePlanseiten-Schleifen – Doppel-Planseiten-Schleifen – SonderbearbeitungFace grinding – Double face grinding – Special machining
PITTLER T&S GmbH | www.pittler.deVertikal-Drehbearbeitungszentren & Pick-up-Systeme – Verzahnen in der KomplettbearbeitungVertical turning center & Pick-up systems – Gear cutting for complete machining
PRÄWEMA Antriebstechnik GmbH | www.praewema.deVerzahnungshonen/-schleifen – Verzahnungsfräsen – Anspitz-/HinterlegungsfräsenGear honing – Gear grinding – Hobbing/Fly-cutting – Chamfering
WMS Werkzeugmaschinenbau Sinsheim GmbH | www.wms-sinsheim.deService-Dienstleistungen – Generalüberholungen – Reparatur von BaugruppenMaintenance – Machine Retrofit – Repairs
WMZ Werkzeugmaschinenbau Ziegenhain GmbH | www.wmz-gmbh.deDreh- & Kombinationsbearbeitung wellenförmiger Bauteile – MotorspindelnTurning & Combined machining of shafts – Motor spindles
DVS TOOLING GmbH | www.dvs-tooling.de Werkzeuglösungen und Technologiesupport für das PRÄWEMA VerzahnungshonenTool solutions and technology support for PRÄWEMA gear honing
NAXOS-DISKUS Schleifmittelwerke GmbH | www.naxos-diskus.deKonventionelle Schleifwerkzeuge – CBN & DiamantwerkzeugeConventional grinding tools – CBN & Diamond tools
DVS Production GmbH & DVS Technology GmbH | www.dvs-production.deDVS Technologien in der Serienfertigung für PKW-KomponentenDVS Technologies in mass production for passenger car components
FRÖHLICH CNC Produktion GmbH | www.cnc-froehlich.deDVS Technologien in der Serienfertigung für Nutzfahrzeug-KomponentenDVS Technologies in mass production for commercial vehicle components
DVS Technology America, Inc. | www.dvs-technology.com DVS Sales & Service in USA, Canada & Mexico
DVS Technology (Shenyang) Co., Ltd. | www.dvs-technology.comDVS Sales & Service in China
DVS Technology Europe GmbH | www.dvs-technology.comDVS Sales & Service in South Europe D
ST-2
016
.12-
EN-H
DM