8/17/2019 Driver Test SOP.doc
http://slidepdf.com/reader/full/driver-test-sopdoc 1/21
Drive Test SOP
Drive Test SOP
8/17/2019 Driver Test SOP.doc
http://slidepdf.com/reader/full/driver-test-sopdoc 2/21
Revision History
Date Version Issued By Approved By Changes
01/31/200 0!1 "#A$ Origina%
Drive Test SOP
8/17/2019 Driver Test SOP.doc
http://slidepdf.com/reader/full/driver-test-sopdoc 3/21
How To:
Drive Test Using TEMS Investigation GSM
I. Starting TEMS
First, make sure TEMS investigation GSM is already installed
1.1 Start TEMS from Start Menu
1.2 This is TEMS investigation GSM user interface
Drive Test SOP
8/17/2019 Driver Test SOP.doc
http://slidepdf.com/reader/full/driver-test-sopdoc 4/21
II. Connect Devices
First, make sure all devices are already connected to the laptop.
.1!efore "e start, "e must identify e#uipment first. $lick the dentify E#uipment
%utton on the E#uipment $ontrol tool%ar.
& dialog named '(ort (roperties' "ill appear
make sure that mo%ile station and G(S is connected to a $)M port on your
computer and the $)M port you use is checked. Than $lick )*
.2TEMS nvestigation no" scans the $)M ports for e+ternal devices and ena%les
these devices automatically. & (ort $onfiguration "indo" is opened if not open,
you can look at configuration ta%-, sho"ing the progress of the scan. hen it is
finished after a fe" seconds-, the te+t '/eady' is displayed at the %ottom of the
(ort $onfiguration. /ed circle in the icons means the device is not yet connected.
Drive Test SOP
8/17/2019 Driver Test SOP.doc
http://slidepdf.com/reader/full/driver-test-sopdoc 5/21
f automatic identify can0t find your e#uipment, you can add them manually
$hoose your (ort and E#uipment, and click )*3
.4To receive data from the mo%ile and G(S, you must connect those devices
$lick $onnect &ll3 on the $onnections Tool%ar.
f the connection is successful, then red circle in the icon "ill change into
green circle.
.5f you "ant to disconnect the device, 6ust click 7isconnect all3 from the
Tool%ar
Drive Test SOP
8/17/2019 Driver Test SOP.doc
http://slidepdf.com/reader/full/driver-test-sopdoc 6/21
III. Recording
!efore start recording, you should open maps or GeoSet- and cell definition
.1 )pen Map
8ou can vie" map "indo" in the Map "orksheet a%ove the status %ar.
n the Map indo" you0ll see map tool%ar. To open Map, click )pen map3
9ocate and select your Map Files and click open
or for fast layering, you can open GeoSet3 instead
.2 )pen $ell 7efinition
From Menu !ar, click $onfiguration, and click $ell 7efinition
than $ell 7efinition "indo" is sho"n. $lick )pen3
Drive Test SOP
8/17/2019 Driver Test SOP.doc
http://slidepdf.com/reader/full/driver-test-sopdoc 7/21
9ocate and select your $ell :ame Files ;.cel- and click open
.4 Start /ecording
8ou can start recording %y clicking /ecord !utton on the tool%ar
Then you0ll %e ask name of log file and "here to save it.
Drive Test SOP
8/17/2019 Driver Test SOP.doc
http://slidepdf.com/reader/full/driver-test-sopdoc 8/21
.5 Stop /ecording
f you "ant to stop recording, 6ust click Stop %utton on the tool%ar
.< /eplay 9og File
f you "ant to replay your log file or to make sure you0ve recorded "ell-,
click )pen logfile3 on the tool %ar
arning 8ou can replay 9og file only if your devices is disconnected
Drive Test SOP
8/17/2019 Driver Test SOP.doc
http://slidepdf.com/reader/full/driver-test-sopdoc 9/21
IV. Testing Mode
5.1 dle Mode
n idle mode, the mo%ile station is stand%y and not making any call. 8ou can
6ust click record %utton to start recording idle mode. =se dle Mode to test
sectori>ation and cross feeder on the night of cut over.
5.2 dle 9ock and dle (revent
hen the mo%ile station is in idle mode, it can %e locked to one channel or to
a set of channels. This inhi%its all reselections to other channels, regardless of the
signal strength and #uality of neigh%oring cells. The inverted operation is also
possi%le, namely to prevent reselection to a specified channel set.
$lick on the tool%ar, and select "hich channel you "ant to lock
To reset the lock on channel function, simply click
on the tool%ar.
There is another "ay to lock on channel, %y using E#uipment (roperties
$lick
on the tool%ar.
Drive Test SOP
8/17/2019 Driver Test SOP.doc
http://slidepdf.com/reader/full/driver-test-sopdoc 10/21
To prevent reselection to a specified channel set, 6ust choose (revent Function
5.4 7edicated Mode
n dedicated mode, the mo%ile station is making a call. 8ou can do it %y either
using the TEMS mo%ile phone, or click redial
on the tool%ar .
Drive Test SOP
8/17/2019 Driver Test SOP.doc
http://slidepdf.com/reader/full/driver-test-sopdoc 11/21
To terminate an ongoing call, simply click
on the tool%ar
5.5 Force ?andover and (revent ?andover
hen the mo%ile station is in dedicated mode, you can manipulate handovers.
Specifically, you can do one of the follo"ingPrevent handover to specified channels. The mo%ile then reports no signal
strength for these channels.
Force handover to a specified channel, or restrict handovers to a chosen channel
set. The mo%ile then reports a /+9ev of @4 for any such cell, 1A for the serving
cell and no /+9ev for other neigh%oring cells.
$lick
E#uipment (roperties- on the tool%ar
To Force handover, simply select Target ?)3 Function, and choose target
channels.
To (revent handover, simply select (revent ?)3 Function, and choose target
channels.
Drive Test SOP
8/17/2019 Driver Test SOP.doc
http://slidepdf.com/reader/full/driver-test-sopdoc 12/21
5.< $ommand Se#uence
$ommand se#uences are used to automate testing of voice as "ell as data. They
allo" you to prerecord all the commands to %e given to the mo%ile stations during a
drive test. =se command se#uence for :B drive test.
Go to menu %ar, click $ontrol3 and than click $ommand Se#uence3
f you0ve created $ommand Se#uence %efore, 6ust open the file
Drive Test SOP
8/17/2019 Driver Test SOP.doc
http://slidepdf.com/reader/full/driver-test-sopdoc 13/21
5.@ G(/S Test
!efore doing G(/S test, your mo%ile phone has to %e configured %ased on
operator parameter. E+ample of manual configuration is presented on &ppendi+ 1.
To start Testing, press /ecord, !ro"se using &( %ro"ser on the mo%ile
phone. ait until you hear GPRS attached3 and PDP contet activated3. Start
%ro"sing for a fe" second, and than close your "ap %ro"ser. 8ou "ill hear GPRS
Detached3. 8ou may click Stop to stop recording.
Drive Test SOP
8/17/2019 Driver Test SOP.doc
http://slidepdf.com/reader/full/driver-test-sopdoc 14/21
V. E!orting "og Fi#e
To process log file data to other soft"are e.g Mapnfo-, you have to e+port the
logfile first. Go to Menu !ar, click 9ogfile3 and than click E+port 9ogfile3
)n the E+port 9ogfile indo", click &dd order3
For E+ample, "e e+port logfiles into Mapnfo Ta% file. $lick SetupC3
Drive Test SOP
8/17/2019 Driver Test SOP.doc
http://slidepdf.com/reader/full/driver-test-sopdoc 15/21
$hoose the nformation Element E- you "ant to e+port. =sually "e choose /+9ev
Su% d!m-3, /+Bual Su%3 and SB3
Go to )ptions Ta%3. f you "ant, you can check nclude file name in file3. Than
click )*3
Drive Test SOP
8/17/2019 Driver Test SOP.doc
http://slidepdf.com/reader/full/driver-test-sopdoc 16/21
&fter finishing setup, fill all the inputs in the &dd E+port )rder3 "indo", and than
click )*3
Than click Start3 to start e+porting logfiles.
Drive Test SOP
8/17/2019 Driver Test SOP.doc
http://slidepdf.com/reader/full/driver-test-sopdoc 17/21
APPENDIX 1.Man$a# Con%ig$ration &'P over GPRS on T() Mo*i#e Phone %or Te#+o,se#
Dust follo" these steps %elo"
=se this (arameter &(: te#+o,se#, =ser id wa!, (ass"ord wa!-/
Drive Test SOP
8/17/2019 Driver Test SOP.doc
http://slidepdf.com/reader/full/driver-test-sopdoc 18/21
=se ( &ddress -0.-.)1.-/0, user id wa!, (ass"ord wa!-/2 Security 3%% ,
Sho" (ictures 3n, /esponse Timer-40 seconds.
Drive Test SOP
8/17/2019 Driver Test SOP.doc
http://slidepdf.com/reader/full/driver-test-sopdoc 19/21
Start !ro"sing
Drive Test SOP
8/17/2019 Driver Test SOP.doc
http://slidepdf.com/reader/full/driver-test-sopdoc 20/21
APPENDIX 2.
Tools :eeded
1. (o"er nverter
2. G(S "ith data ca%le-
4. TEMS ?andset "ith data ca%le-
5. 9aptop "ith TEMS soft"are installed
Drive Test SOP