DIN
16
DIN VERSION 0width 685 mm
G E N E R A L C A T A L O G U E G R A F I • C O N C H I G L I A S P A
SpecificationsOverall height sizes available: 940 mm (h5) – 1180 mm (h7) – 1390 mm (h8)Rated insulation voltage UI 690V.Connection to base according to DIN 43629.Easily disassembled front cross-piece for improved access. Total insulation.Hinged door complete with closing mechanism operated by a retracting handle and Y21 single-cipher safety lock (DIN18252 profile cylinder).Door opening side can be changed on site.Bottom plate with studs with M10 threaded inserts in UNI EN 12165 brass buried in the moulding and positioned in accordance with DIN 43629 standards.
Materials Made of fiberglass-reinforced plastic in RAL7038 colour. Thermoplastic resin handle. Operating tenon in galSpacezed steel. Internal rods and posts in steel with GEOMET 321 treatment. Concealed external hinges in stainless steel. Seals in foamed EPDM.
StandardsThe cabinet conforms to IEC EN 62208 standards. Protection class IP55-IP44 according to IEC EN 60529. Mechanical strength tests performed in accordance with standard IEC EN 61439-5.
External dimensions Space Internal dimension Space feature IP protectionHeight Width Depth Height Width Depth Size Door dimension Code Model
940 685 330 a 883 667 298 890 824x595IP55
IP44
072005101
072005200G0-5/5/T G0-5/5/T-4
1180 685 330 a 1130 667 298 1130 1064x595IP55
IP44
072007107
072007206G0-7/7/TG0-7/7/T-4
1390 685 330 a 1340 667 298 1340 1274x595IP55
IP44
072008105
072008204G0-8/8/TG0-8/8/T-4
Cabinet 1 compartment
NOTE: The product refers to the basic version of the cabinet and must be completed with the relative accessories for installation, to be ordered separately: frame in black coloured steel with 18/24 cataphoretic coating to be fixed to the floor or SMC plinth to be buried in the ground.
a
Dept
h 33
0 m
m
17
DIN
VER
SIO
N 0
G E N E R A L C A T A L O G U E G R A F I • C O N C H I G L I A S P A
External dimensions Internal dimension Space feature IP protectionHeight Width Depth Height Width Depth Size Code Model
900 684 326 300* 435 225 890 IP55 072009103 G0-5/Z
Depth Code Model
330 095777306 G7/TA
SpecificationsConnection to the cabinet with fixing template in accordance with standard DIN 43629. Removable upper front wall. H= height above ground*. Complete with cable fixing brackets in insulating material.
MaterialsMade of SMC in RAL 7038 grey colour.
Plinth fixed in the ground
SpecificationsScrews in AISI 304 stainless steel to guarantee access over time.Complete with brackets for fixing onto a concrete base
MaterialsMade of steel with black coloured 18/24 cataphoretic coating treatment.
Fixing frame
Dept
h 33
0 m
m
Maximum loadMaximum load that can be applied to the bottom plate and protected useful space for equipment, in accordance with the characteristics certified by standard IEC EN 62208. The table gives the maximum load that can be applied to the bottom plate installed on both the bottom wall and uprights (in the case of multiple compartments, the value refers to the individual compartments). Other installation modes may be able to support heavier weights. Protected useful space means the space used for assembling protection and control apparatus for which the IP protection is guaranteed by the enclosure.
Thermal power dissipation (Pmax. = watt)Calculation made in accordance with standard “IEC 17-43:
overtemperature determination method, by extrapolation, for non-standard (ANS) protection and control equipment assemblies for low voltage (LV panels)”.The thermal power dissipation values (Pmax=watt) of the cabinets given in the table are valid considering:• the habitual installation conditions (exposure on all sides);• 35°C constant ambient temperature;• overtemperature values obtained at half height [∆ T 0.5 (°C)] (value given in the table);• constant overtemperature values at the top ∆T 1.0 =30°C. Pmax(watt) is an overall value based on the entire cubicle structure. In the case of multiple compartments, the value must be divided by the number of compartments. The standard thermal dissipation value [Pmax(watt)] can be increased by installing air vents.
Maximum load - thermal power dissipation
Protected useful spaceMax load (Kg) ∆ T 0,5 (°C) Pmax (Watt) IP protectionHeight Width Depth Code Model
805 580 235 65 21,822,5
153 159
IP55
IP44
072005101
072005200G0-5/5/TG0-5/5/T-4
1045 580 235 80 20,8 21,5
185 193
IP55
IP44
072007107
072007206G0-7/7/TG0-7/7/T-4
1255 580 235 90 20,121,0
222 232
IP55
IP44
072008105
072008204G0-8/8/TG0-8/8/T-4
Optional: available as optional, dedicated bottom closing partition in different materials.
18
DIN VERSION 1width 910 mm
G E N E R A L C A T A L O G U E G R A F I • C O N C H I G L I A S P A
Cabinet 1 compartment
External dimensions Space Internal dimension Space feature IP protectionHeight Width Depth Height Width Depth Size Door dimension Code Model
940 910 330 a 883 892 298 890 824x820IP55
IP44
072105109
072105208G1-5/5/TG1-5/5/T-4
1180 910 330 a 1130 892 298 1130 1064x820IP55
IP44
072107105
072107204G1-7/7/TG1-7/7/T-4
1390 910 330 a 1340 892 298 1340 1274x820IP55
IP44
072108103
072108202G1-8/8/TG1-8/8/T-4
Dept
h 33
0 m
m
a
SpecificationsOverall height sizes available: 940 mm (h5) – 1180 mm (h7) – 1390 mm (h8)Rated insulation voltage UI 690V.Connection to base according to DIN 43629.Easily disassembled front cross-piece for improved access. Total insulation.Hinged door complete with closing mechanism operated by a retracting handle and Y21 single-cipher safety lock (DIN18252 profile cylinder).Door opening side can be changed on site.Bottom plate with studs with M10 threaded inserts in UNI EN 12165 brass buried in the moulding and positioned in accordance with DIN 43629 standards.
Materials Made of fiberglass-reinforced plastic in RAL7038 colour. Thermoplastic resin handle. Operating tenon in galSpacezed steel. Internal rods and posts in steel with GEOMET 321 treatment. Concealed external hinges in stainless steel. Seals in foamed EPDM.
StandardsThe cabinet conforms to IEC EN 62208 standards. Protection class IP55-IP44 according to IEC EN 60529. Mechanical strength tests performed in accordance with standard IEC EN 61439-5.
NOTE: The product refers to the basic version of the cabinet and must be completed with the relative accessories for installation, to be ordered separately: frame in black coloured steel with 18/24 cataphoretic coating to be fixed to the floor or SMC plinth to be buried in the ground.
19
DIN
VER
SIO
N 1
G E N E R A L C A T A L O G U E G R A F I • C O N C H I G L I A S P A
External dimensions Internal dimension Space feature IP protectionHeight Width Depth Height Width Depth Size Code Model
900 911 326 300* 630 225 890 IP55 072109101 G1-5/Z
SpecificationsConnection to the cabinet with fixing template in accordance with standard DIN 43629. Removable upper front wall. H= height above ground*. Complete with cable fixing brackets in insulating material.
MaterialsMade of SMC in RAL 7038 grey colour.
Plinth fixed in the ground
Dept
h 33
0 m
m
Protected useful spaceMax load (Kg) ∆ T 0,5 (°C) Pmax (Watt) IP protectionHeight Width Depth Code Model
805 805 235 70 22,5 23,3
218 228
IP55
IP44
072105109
072105208G1-5/5/TG1-5/5/T-4
1045 805 235 90 21,7 22,5
270 281
IP55
IP44
072107105
072107204G1-7/7/TG1-7/7/T-4
1255 805 235 100 21,0 21,6
302 314
IP55
IP44
072108103
072108202G1-8/8/TG1-8/8/T-4
Depth Code Model
330 095779302 G9/TA
SpecificationsScrews in AISI 304 stainless steel to guarantee access over time.Complete with brackets for fixing onto a concrete base
MaterialsMade of steel with black coloured 18/24 cataphoretic coating treatment.
Fixing frame
Maximum loadMaximum load that can be applied to the bottom plate and protected useful space for equipment, in accordance with the characteristics certified by standard IEC EN 62208. The table gives the maximum load that can be applied to the bottom plate installed on both the bottom wall and uprights (in the case of multiple compartments, the value refers to the individual compartments). Other installation modes may be able to support heavier weights. Protected useful space means the space used for assembling protection and control apparatus for which the IP protection is guaranteed by the enclosure.
Thermal power dissipation (Pmax. = watt)Calculation made in accordance with standard “IEC 17-43:
overtemperature determination method, by extrapolation, for non-standard (ANS) protection and control equipment assemblies for low voltage (LV panels)”.The thermal power dissipation values (Pmax=watt) of the cabinets given in the table are valid considering:• the habitual installation conditions (exposure on all sides);• 35°C constant ambient temperature;• overtemperature values obtained at half height [∆ T 0.5 (°C)] (value given in the table);• constant overtemperature values at the top ∆T 1.0 =30°C. Pmax(watt) is an overall value based on the entire cubicle structure. In the case of multiple compartments, the value must be divided by the number of compartments. The standard thermal dissipation value [Pmax(watt)] can be increased by installing air vents.
Maximum load - thermal power dissipation
Optional: available as optional, dedicated bottom closing partition in different materials.
20
DIN VERSION 2width 1150 mm
G E N E R A L C A T A L O G U E G R A F I • C O N C H I G L I A S P A
Cabinet 1 compartment
External dimensions Space Internal dimension Space feature IP protectionHeight Width Depth Height Width Depth Size Door dimension Code Model
940 1150 330 a 883 1132 298 890 824x1060IP55
IP44
072205107
072205206G2-5/5A/TG2-5/5A/T-4
1180 1150 330 a 1130 1132 298 1130 1064x1060IP55
IP44
072207103
072207202G2-7/7A/TG2-7/7A/T-4
1390 1150 330 a 1340 1132 298 1340 1274x1060IP55
IP44
072208101
072208200G2-8/8A/TG2-8/8A/T-4
Dept
h 33
0 m
m
a a
SpecificationsOverall height sizes available: 940 mm (h5) – 1180 mm (h7) – 1390 mm (h8)Rated insulation voltage UI 690V.Connection to base according to DIN 43629.Easily disassembled front cross-piece for improved access. Total insulation.Hinged door complete with closing mechanism operated by a retracting handle and Y21 single-cipher safety lock (DIN18252 profile cylinder).Door opening side can be changed on site.Bottom plate with studs with M10 threaded inserts in UNI EN 12165 brass buried in the moulding and positioned in accordance with DIN 43629 standards.
Materials Made of fiberglass-reinforced plastic in RAL7038 colour. Thermoplastic resin handle. Operating tenon in galSpacezed steel. Internal rods and posts in steel with GEOMET 321 treatment. Concealed external hinges in stainless steel. Seals in foamed EPDM.
StandardsThe cabinet conforms to IEC EN 62208 standards. Protection class IP55-IP44 according to IEC EN 60529. Mechanical strength tests performed in accordance with standard IEC EN 61439-5.
NOTE: The product refers to the basic version of the cabinet and must be completed with the relative accessories for installation, to be ordered separately: frame in black coloured steel with 18/24 cataphoretic coating to be fixed to the floor or SMC plinth to be buried in the ground.
21
DIN
VER
SIO
N 2
G E N E R A L C A T A L O G U E G R A F I • C O N C H I G L I A S P A
SpecificationsConnection to the cabinet with fixing template in accordance with standard DIN 43629. Removable upper front wall. H= height above ground*. Complete with cable fixing brackets in insulating material.
MaterialsMade of SMC in RAL 7038 grey colour.
External dimensions Internal dimension Space feature IP protectionHeight Width Depth Height Width Depth Size Code Model
900 1149 326 300* 960 225 890 IP55 072209109 G2-5/Z
Plinth fixed in the ground
Dept
h 33
0 m
m
Protected useful spaceMax load (Kg) ∆ T 0,5 (°C) Pmax (Watt) IP protectionHeight Width Depth Code Model
805 1025 235 90 23,0 24,0
277 289
IP55
IP44
072205107
072205206G2-5/5A/TG2-5/5A/T-4
1045 1025 235 95 22,3 23,0
343 357
IP55
IP44
072207103
072207202G2-7/7A/TG2-7/7A/T-4
1255 1025 235 100 21,7 22,4
367382
IP55
IP44
072208101
072208200G2-8/8A/TG2-8/8A/T-4
Depth Code Model
330 095771309 G12/TA
SpecificationsScrews in AISI 304 stainless steel to guarantee access over time.Complete with brackets for fixing onto a concrete base
MaterialsMade of steel with black coloured 18/24 cataphoretic coating treatment.
Fixing frame
Maximum loadMaximum load that can be applied to the bottom plate and protected useful space for equipment, in accordance with the characteristics certified by standard IEC EN 62208. The table gives the maximum load that can be applied to the bottom plate installed on both the bottom wall and uprights (in the case of multiple compartments, the value refers to the individual compartments). Other installation modes may be able to support heavier weights. Protected useful space means the space used for assembling protection and control apparatus for which the IP protection is guaranteed by the enclosure.
Thermal power dissipation (Pmax. = watt)Calculation made in accordance with standard “IEC 17-43:
overtemperature determination method, by extrapolation, for non-standard (ANS) protection and control equipment assemblies for low voltage (LV panels)”.The thermal power dissipation values (Pmax=watt) of the cabinets given in the table are valid considering:• the habitual installation conditions (exposure on all sides);• 35°C constant ambient temperature;• overtemperature values obtained at half height [∆ T 0.5 (°C)] (value given in the table);• constant overtemperature values at the top ∆T 1.0 =30°C. Pmax(watt) is an overall value based on the entire cubicle structure. In the case of multiple compartments, the value must be divided by the number of compartments. The standard thermal dissipation value [Pmax(watt)] can be increased by installing air vents.
Maximum load - thermal power dissipation
Optional: available as optional, dedicated bottom closing partition in different materials.
22
DIN
G E N E R A L C A T A L O G U E G R A F I • C O N C H I G L I A S P A
685 330
260
e
M10
16
223
160
A
I
c
Code Model IP protection A e c I
072005101
072005200G0-5/5/TG0-5/5/T-4
IP55IP44
940 529 453 495
072007107
072007206G0-7/7/TG0-7/7/T-4
IP55IP44
1180 529 453 495
072008105
072008204G0-8/8/TG0-8/8/T-4
IP55IP44
1390 529 453 495
DIN VERSION 0width 685 mm
Technical drawings
23G E N E R A L C A T A L O G U E G R A F I • C O N C H I G L I A S P A
910 330
260
e
M10
16
223
160
A
I
c
Code Model IP protection A e c I
072105109
072105208G1-5/5/TG1-5/5/T-4
IP55IP44
940 754 648 690
072107105
072107204G1-7/7/TG1-7/7/T-4
IP55IP44
1180 754 648 690
072108103
072108202G1-8/8/TG1-8/8/T-4
IP55IP44
1390 754 648 690
DIN VERSION 1width 910 mm
Technical drawings
24
DIN
G E N E R A L C A T A L O G U E G R A F I • C O N C H I G L I A S P A
1150 330
245
e 147 e
16
160
223
A
c
i
M10
DIN VERSION 2width 1150 mm
Code Model IP protection A e c I
072205107
072205206G2-5/5A/TG2-5/5A/T-4
IP55IP44
940 424 960 1020
072207103
072207202G2-7/7A/TG2-7/7A/T-4
IP55IP44
1180 424 960 1020
072208101
072208200G2-8/8A/TG2-8/8A/T-4
IP55IP44
1390 424 960 1020
Technical drawings
25G E N E R A L C A T A L O G U E G R A F I • C O N C H I G L I A S P A
160 225
c
B
a
A
268
326
300 280
280900
Code Model A B a c
072009103 G0-5/Z 684 495 543 435
072109101 G1-5/Z 911 690 738 630
072209109 G2-5/Z 1149 1020 1068 960
DIN
Technical drawings
Plinth fixed in the ground